Sponsor jobs in Auburn, New YorkCreate job alerts

Job DescriptionPower-Flo Technologies is seeking to hire a full-time laborer that can support our pump and motor repair shop in Auburn, NY. Laborer Responsibilities Assist with the following: • Disassemble pumps and electric motors to determine cause of failure and what is required to repair., • Install replacement bearings, seals, shafts, and gaskets on various equipment., • Troubleshoot pump systems in the field using a multimeter., • Make repairs in the field to pumps, motors, and fans., • Use power tools, hand tools, and multimeter to repair pump system in the field., • Work with a helper to complete repair jobs both in shop and on the road., • Replace and wire electric motors at job sites., • Perform troubleshooting of pump sets and simple controls (motor starters). Laborer Necessary Qualifications • Ability to work independently and in a team setting, • Basic knowledge regarding use of a PC, • Experience using all types of mechanics tools., • Competent with the use of electrical test equipment, i.e. Multi meter, shop tools, hand tools, pneumatic tools, hoists, etc., • Ability to troubleshoot problems and independently repair., • Knowledge of alignment techniques., • Ability to troubleshoot systems in house and in the field., • Familiar with the installation, service, and maintenance of various pumps and motors., • A plus if familiar with submersible pumps, close-coupled pumps, frame mount pumps, split case pumps, AC motors, etc., • A valid and clean driver's license to operate company vehicles as needed Physical Requirements : • Ability to stand for up to 8 Hours., • Ability to lift 50 pounds., • Ability to work on elevated platforms., • Ability to climb ladders., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching., • You may be exposed to dust, loud noises, and hot and cold conditions., • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery. Salary Range between $15.50 - $18/hour Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K Learn more about us here: Follow us on LinkedIn: About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Our Auburn Pump and Motor Repair Shop is looking for a skilled Motor Winder to join the team. The Motor Winder’s main responsibility is to assemble, repair, and maintain electric motors both in the shop and in the field. This is a full-time, on-site position. Monday – Friday. 7 AM – 3:30 PM. Motor Winder Responsibilities : • Assemble, repair, and maintain electric motors., • Test and rewind electric motor and generator stators, armatures, or rotors., • Inspect equipment and parts for damage, diagnose possible reason(s) for failure., • Provide information on parts/work required., • Provide recommendations to improve reliability of equipment., • Observe and adhere to Power-Flo Technologies safety procedures., • Experience specifically in winding AC/DC electric motor stators., • Familiar with various hand tools., • Familiar with power tools such as impact guns, cut off wheels, and drills., • Positive attitude and willingness to learn., • Good organizational skills and attention to detail., • Ability to work both independently and in a team setting., • Basic computer skills., • Must be able to regularly lift and/or move more than 25 pounds, frequently lift and/or move more than 50 pounds, and occasionally lift and/or move more than 100 pounds., • Ability to stand for up to 8 Hours., • Ability to lift 50 pounds., • Ability to work on elevated platforms., • Ability to climb ladders., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching., • You may be exposed to dust, loud noises, and hot and cold conditions., • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery. Salary Range between $17 - $32 per hour based on experience. Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K Learn more about us here: Follow us on LinkedIn: About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionPower-Flo Technologies is a leading distributor of electrical equipment offering one of the most comprehensive product and service portfolios in the state, including automation, drives, controls, power distribution, and motor repair. We are looking for an experienced Applications Engineer to join our Upstate New York team. You will play a critical role in delivering complete, real-world systems and solutions to our customers. Applications Engineer Primary Functions • Pre and post sales support for automation, PLCs, drives, motion control, and machine vision products and services., • Assist customers with proof of concept for automation, PLCs, drives, motion control, and machine vision applications., • Assist sales and account managers as necessary to close business., • Phone and On-Site customer support., • Preparation and execution of product training classes including development of course and materials., • Attend vendor training classes as offered and/or required., • Maintenance, appearance and upgrades to demos., • Weekly engineering activity report and schedule., • Target and plan for minimum $20K annual engineering and training billings., • Minimum 2 customer calls per week, whether technical or sales., • Monitor and complete assigned Engineering Tasks, • BS Engineering or equivalent technical degree, • Knowledge of automation, PLCs, drives, motion control, and machine vision applications, • Advanced computer skills: Windows, VM Ware, Networking, • Knowledge of Siemens programming and HMI software a plus, • Ability to operate a motor vehicle We are an equal opportunity employer offering competitive compensation and benefits package including health, disability, life insurance, 401(k) and long-term disability plans. Salary Range $75,000 - $125,000 annually About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionOur Auburn Pump and Motor Repair Shop is looking for a skilled Machinist to join the team. Primary Functions At the direction of the Shop Management the Machinist is to perform typical duties of a traditional manual machinist working with horizontal lathes, vertical milling machine, general machine shop equipment: band saws, Bridgeport drill presses, grinders, as well as some welding. Machinist Essential Responsibilities • Set up and operate conventional lathes, mills, balancing equipment, and commutator profiler., • Ability to machine housings, shafts, keyways, and sleeves., • Must be familiar with common industry tolerances and fits for motor repair., • Fabricate products to meet established quality standards and the requirements of our customers., • Establish and follow maintenance schedules for shop equipment., • Provide technical expertise as needed., • Maintain a neat and orderly work area at all times., • Organize and maintain personal and shop tools and equipment., • Willing and able to work OT as required. Machinist Necessary Qualifications • 5 years mechanical assembly and disassembly experience preferred., • Ability to read mechanical prints and schematics., • Ability to work independently and in a team setting., • Basic knowledge regarding use of a PC., • Competent with the use of electrical test equipment, i.e. Multi meter, shop tools, hand tools, pneumatic tools, hoists, etc., • Mechanical aptitude and basic understanding of electrical theory required., • Valid and clean NYS driver's license to operate company vehicles as needed. Machinist Physical Requirements • Ability to stand for up to 8 Hours., • Ability to lift 50 pounds., • Ability to work on elevated platforms., • Ability to climb ladders., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching., • You may be exposed to dust, loud noises, and hot and cold conditions., • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery. Salary Range between $20 - $30/hour. Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K Learn more about us here: Follow us on LinkedIn: About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionPower-Flo Technologies Auburn is now hiring a Mechanic for our Pump and Motor Repair Shop. At the direction of the Shop Manager, Mechanics are responsible for the proper disassembly and evaluation of various electric motor styles including troubleshooting. Technicians are also responsible for the assembly, quality control and testing processes involved in electric motor repair. Field Service positions are also available to properly qualified individuals. Mechanic Essential Responsibilities include but are not limited to the following : • Disassemble mechanical AC & DC motors, gear units and pumps., • Assemble mechanical AC & DC motors, gear units and pumps., • Diagnose problems and failures of incoming units to ensure the customer’s complaint is resolved., • Interpret and apply dimensional measurements., • Measure and record electrical data, mechanical fits and clearances., • Write up work scopes for all necessary materials in order to complete the repair., • Follow all necessary instructions in order to complete the repair., • Electrically connect repaired apparatus for test runs., • Maintain a neat and orderly work area., • Organize and maintain personal and shop tools and equipment., • Willing and able to work OT as required. Mechanic Necessary Qualifications include : • 2 years' mechanical assembly and disassembly experience., • Ability to read mechanical prints and schematics., • Ability to work independently and in a team setting., • Basic knowledge regarding use of a PC., • Competent with the use of electrical test equipment, i.e. Multi meter, shop tools, hand tools, pneumatic tools, hoists etc., • Mechanical aptitude and basic understanding of electrical theory required., • Valid and clean driver's license to operate company vehicles as needed. Physical Requirements : • Ability to stand for up to 8 Hours., • Ability to lift 50 pounds., • Ability to work on elevated platforms., • Ability to climb ladders., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching., • You may be exposed to dust, loud noises, and hot and cold conditions., • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery. Wage Commensurate with Experience (Between $17 - $32/hour + benefits) Competitive Benefits Package • Medical, dental, vision plans, • PTO program and paid holidays, • 401K We are also looking for Motor Winders, Helpers, and Parts Cleaners. We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Power-Flo Technologies is a fast-growing family of companies that consist of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan, New England, and Upstate New York areas. At Power-Flo Technologies, we monitor, troubleshoot, and repair all types of industrial electrical equipment including electric motors and pumps. Our Buffalo and Auburn repair facilities provide field service and in-house repair or rebuilding of equipment and machinery. We are looking for you to join our upstate Pump and Motor Repair Team as an Outside Sales Account Manager. Territories: Auburn and Buffalo Salary Range: $50K – $95K (draw against commission structure) Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K with employer match, • Company provided life insurance (after 1 year of employment) Outside Sales (Pump and Motor Repair) Responsibilities: • Schedule outside appointments with existing customers to review requirements, nurture relationships, maximize sales opportunities, and uncover new opportunities., • Generate and develop new business to increase revenue, through prospecting activities, including cold calling., • Effectively liaison between the company and customers for all ongoing account management activities including quotations, pricing, delivery, technical support, and service., • Establish and maintain up to date knowledge on procedures, services, and tools by successfully completing all training activities as needed., • Determine customer requirements to recommend specific products, solutions, or services., • Target Account Planning and Execution., • Perform all administrative aspects of the position, including sales / opportunity reports and maintenance of customer accounts., • Prepare and execute effective sales presentations and demonstrations of services., • Annual sales forecast and execution., • Keep up to date with market trends and competitor activity., • Attend conferences and trade shows., • All other duties as assigned from time to time. Outside Sales (Pump and Motor Repair) Qualifications: • Experience in wholesale motor/electrical business., • At least 2 years of business-to-business sales experience., • Desire to grow business through outside sales appointments., • Strong negotiation and communication skills., • Effective time management, organization, and multi-tasking skills., • Commitment to quality., • Proficiency with Microsoft Office., • Capable of preserving confidential or sensitive information., • Valid and clean driver’s license to operate company vehicles., • Epicor Eclipse ERP preferred. Physical Requirements • Ability to travel extensively, including driving to client locations and attending off-site meetings., • The role involves a significant amount of walking, standing, and potentially carrying promotional materials or product samples., • Ability to utilize a computer keyboard, computer monitor, computer mouse, adding machine, laptop, and telephone for prolonged periods of time Learn more about our Pump and Motor Repair capabilities here: Follow us on LinkedIn: Our Core Values • Our People, • Relationships, • Innovation, • Sustainability, • Growth, • Determination Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionPower-Flo Technologies Auburn is seeking warehouse associates and drivers to join our team. Benefits: • Health, Dental and Vision benefits, • Overtime Opportunities, • PTO Program, • Paid Holidays Warehouse Associate and Driver Key Responsibilities : • Perform basic warehouse work to include, removing sold parts from stock, placing received parts on shelves, processing items for shipment, receiving, driving, organizing etc., • Maintaining a clean Driver's License, • Pull and stage orders for shipment, • Safely and efficiently pick up and deliver orders, • Load, unload, prepare, inspect, and operate delivery vehicle, • Plan delivery route to maximize efficiency and productivity for the day, • Obey all traffic laws and parking regulations, • Organize Inventory Warehouse Associate and Driver Requirements : • 2+ years of warehouse experience required, • High School Diploma or equivalent, • Current, valid NYS driver’s license (7 years clean driving record), • Ability to obtain & maintain DOT certification, • Ability to lift 50 pounds and push or pull over 100 pounds, • Ability to follow processes, procedures, and policies, • Ability to work well independently, have a great attitude, and be willing to learn, • Ability to communicate in verbal and written from with functional English skills, • Excellent organizational and time management skills, • Box Truck experience (16-18 ft) and Flatbed truck experience is a plus. No CDL required., • Forklift experience a plus We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS. For this and other opportunities check out

Job Description At Power-Flo Technologies, we monitor, troubleshoot, and repair all types of industrial electrical equipment including electric motors and pumps. As the Regional Repair Shop Manager, you will play a critical role in driving business growth, ensuring repair quality, and delivering top-tier service to our customers. You will oversee both our Buffalo and Auburn repair facilities which provide field service and in-house repair or rebuilding of equipment and machinery. Salary Range: $75,000 – $125,000/year Benefits • Health Insurance (medical, dental, vision), • PTO Program and Paid Holidays, • 401K Your core responsibilities will include: Developing Sales Strategies and Leading Account Management • Manage the end-to-end workflow of the shop, including repair, packing, delivery, and pick-up, to ensure efficiency and on-time performance. NECESSARY QUALIFICATIONS • Experience in wholesale motor/electrical business., • Strong leadership skills., • Excellent organizational skills., • Inventory management experience., • Ability to strategize and plan., • Proficiency with Microsoft Office., • Excellent verbal and written communication skills., • Demonstrated capability to manage high quality, efficient and cost-effective operations a must., • Associates degree from two-year college or university, one to two years' related experience and/or training; or equivalent, • Ability to travel between Auburn and Buffalo locations (overnights not required) PHYSICAL REQUIREMENTS • Ability to sit for prolonged periods of time., • Ability to utilize a computer keyboard, computer monitor, adding machine, and telephone for prolonged periods of time., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching., • You may be exposed to dust, loud noises, and hot and cold conditions., • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery. We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Hybrid: Required to be onsite 3 times per week.Hours: 9:00am-5:00pm (flexible).Summary: This role will be responsible for leading and executing several key projects under the Client Front Line Care (FLC) organization under minimal supervision.Identify key project members and milestones required to t

The Project Manager will manage projects focused on supply chain management, Enterprise Resource Planning (ERP) systems, Electronic Data Interchange (EDI), and Third-Party Logistics (3PL) operations.This role is responsible for planning, executing, and delivering projects on time, within budget, and

Our client is a leader in renewable energy development, dedicated to delivering high-quality commercial and small utility-scale solar & BESS projects that drive a cleaner and more sustainable future.We pride ourselves on collaboration, innovation, and excellence in execution.The ideal candidate will

Bace Build is seeking an experienced and driven General Contractor Project Manager to oversee and lead our construction projects from inception through completion.The work for this role is centered on a dynamic and impactful development portfolio and residential and commercial 3rd party projects, pr

We are exclusively helping out a large WNY commercial construction company in hiring a Project Manager.This position offers one of the best benefit packages around compared to other construction firms, who works on the biggest and best projects across WNY.The Construction Project Manager will overse

Exact compensation will be determined on the individual candidates' qualifications and location The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role.

Integrated Logistics Support (ILS) Project Manager to join our Integrated Logistics Support Team to work in a dynamic and multidimensional environment.The candidate will create, evaluate, modify, refine, and implement system support and maintenance concepts/plans to support evolving systems in order

PII) has been a family-run business since 1924 and we believe our.Through our extensive network of hot mix asphalt and ready-mix concrete plants, quarries, and liquid asphalt terminals, PII delivers the highest quality materials and custom solutions to thousands of road construction and road mainten

Project Coordinator Job Duties: Accomplishes work requirements by orienting, training, assigning, scheduling, and coaching employees.Meets work standards by following production, productivity, quality,

PII) has been a family-run business since 1924 and we believe our.Through our extensive network of hot mix asphalt and ready-mix concrete plants, quarries, and liquid asphalt terminals, PII delivers the highest quality materials and custom solutions to thousands of road construction and road mainten

Project Coordinator Job Duties: Accomplishes work requirements by orienting, training, assigning, scheduling, and coaching employees.Meets work standards by following production, productivity, quality,

Our client is a leader in renewable energy development, dedicated to delivering high-quality commercial and small utility-scale solar & BESS projects that drive a cleaner and more sustainable future.We pride ourselves on collaboration, innovation, and excellence in execution.The ideal candidate will

Hybrid: Required to be onsite 3 times per week.Hours: 9:00am-5:00pm (flexible).Summary: This role will be responsible for leading and executing several key projects under the Client Front Line Care (FLC) organization under minimal supervision.Identify key project members and milestones required to t

The Project Manager will manage projects focused on supply chain management, Enterprise Resource Planning (ERP) systems, Electronic Data Interchange (EDI), and Third-Party Logistics (3PL) operations.This role is responsible for planning, executing, and delivering projects on time, within budget, and

What you'll need** Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future + Bachelor's Degree preferred with 8-10 years of relevant experience.