Engineering jobs in Auburn, New YorkCreate job alerts

Saab Inc.’s Surveillance Systems division in East Syracuse, NY is seeking a Senior Mechanical Engineer. The engineer will be a member of the Mechanical Engineering team responsible for the development of mechanical systems and assemblies across various ground based, shipboard and airborne military radar platforms. Responsibilities will include but may not be limited to the following: • Application of mechanical engineering principles for the design and development of mechanical components, assemblies and systems., • Develop CAD 2D and 3D models of electronic, mechanical and electro-mechanical components, assemblies and systems., • Documentation of design solutions including reports, engineering drawings and Bill of Materials (BOM)., • Present and discuss technical concepts, tradeoffs, analyses, designs, and performance estimates., • Interface with Systems Engineering and other disciplines to develop/define/implement customer requirements., • Follow through on full product lifecycle: development, prototyping, integration, verification, delivery, and support., • Incorporate Mechanical Engineering best practices Design for Cost, Maintainability and Manufacturability., • Identify, manage, and solve problems associated with mechanical engineering work products., • Apply experience and knowledge to resolve design, supplier quality, manufacturing, and field issues., • Follow company standard operating procedures and Quality System requirements., • Plan, organize, and estimate required effort for responsible tasks, including possibly writing Basis of Estimates (BOEs)., • Provide effective communication across functional teams., • Work as key member of a cross-functional team to develop mechanical and electro-mechanical solutions. Compensation Range: $99,100-$128,800 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Experience and Skills: • Bachelor of Science Degree in Mechanical Engineering., • Minimum of 8 years of relevant experience in advanced mechanical design with broad application and a fundamental understanding of the product development life cycle., • Understanding of mechanical design philosophy and design process flow., • Fundamental understanding of industry accepted design methods and practices, including design spaces/tradeoffs, test data analysis, and requirement/specification change processes., • Significant product development background demonstrating a strong engineering aptitude and good problem-solving skills., • Demonstrated ability to resolve issues during design, development and execution of mechanical engineering activities., • Experience using SolidWorks, AutoCad, Creo, Ansys, MS Office (Excel, Word, Visio, PowerPoint, Outlook, etc.) to create drawings, documents, work products, and presentations., • Ability to update and review mechanical drawings for proper geometric dimension tolerancing (GD&T), accuracy, and completeness., • Strong written and verbal interpersonal and communication skills., • Proven contributor on project teams to accomplish objectives., • Effective contributor in a team environment, providing technical leadership where applicable., • Ability to work independently to achieve technical and program requirements., • Ability to work with other engineering disciplines to contribute to a collaborative development environment., • Prior experience with DoD or with U.S. government customers is highly desirable., • Familiarity with Military Standards, ruggedized equipment design, and environmental test requirements., • Knowledge of materials and corrosion control., • Experience with Geometric Dimensioning and Tolerancing (GD&T)., • Demonstrated performance and proficiency in the elements of Mechanical design, e.g. analysis and implementation of requirements, developing design concepts, evaluating designs, technical analysis, generating designs, design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: * Medical, vision and dental insurance for employees and dependents * Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability * 401(k) with immediate vesting on employer match * Tuition assistance * Student loan assistance * Wellness account, Care.com subscription and employee assistance programs * Employee stock purchase program with employer match Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job Description JOB SUMMARY: Drive successful product launches, high level technical support for efficient day to day operations, and continuous improvement initiatives in a goal oriented / team building environment. Essential Job Duties and Responsibilities: (Additional duties may be assigned) Responsible for quoting of tooling and vendor management. Drive continuous improvement for standard work, 6S, part reordering, visual factory, TWI, continuous education, and other LEAN related initiatives to drive measurables in desirable directions. Manage technical support to drive high efficiencies, low CoQ, and other measurables in day to day operations. Ensure successful new product launches from start through first production runs. Requirements Minimum Qualification Standards: A Bachelor’s Degree in a related field along with five years’ experience as an engineer, project manager or senior level manager in the plastics industry is required. Work experience of 5-10 plus years in plastics (blow molding preferred), an engineering, project management or senior level manager position will be considered equivalent. High school diploma or GED is required.

Job Description We are looking for an experienced Engineering Project Manager III to lead critical initiatives with our team. This long-term contract position is based in Skaneateles, New York, and requires a hybrid work schedule, with onsite presence three times per week. The role involves managing cross-functional projects with minimal supervision, ensuring compliance with medical device industry standards. Responsibilities: • Define project scope and identify key team members and milestones necessary for successful execution., • Collaborate with internal departments and external stakeholders, including R& D, technical communication teams, and suppliers, to drive project progress., • Provide regular updates on project status and ensure timely communication of any changes., • Manage projects from initiation to completion, ensuring deliverables align with the intended objectives., • Maintain detailed documentation of project decisions, milestones, and evidence to ensure auditability and compliance with industry regulations., • Ensure project outputs meet quality standards and fulfill project intentions upon closure., • Negotiate and coordinate effectively across functions to address challenges and maintain project momentum., • Utilize Microsoft Office tools to track progress and manage documentation effectively., • Bachelor's degree in engineering, manufacturing, operations, or a related field is required., • Minimum of 8-10 years of experience in manufacturing, operations, or project management., • At least 2-5 years of experience managing projects within a matrix organization., • Proven ability to work independently and drive projects to completion., • Strong attention to detail and communication skills, with the ability to negotiate cross-functionally., • Familiarity with regulated industries and experience in medical device environments preferred., • Proficiency in Microsoft Office Suite and SAP systems., • Experience with labeling updates and Trackwise systems is a plus.

Proficiency in Revit and AutoCAD for electrical design is required. Design building electrical systems, including power distribution, lighting, and fire alarm systems. Conduct code analysis and ensure design compliance with applicable regulations.

Job DescriptionPower-Flo Technologies is a leading distributor of electrical equipment offering one of the most comprehensive product and service portfolios in the state, including automation, drives, controls, power distribution, and motor repair. We are looking for an experienced Applications Engineer to join our Upstate New York team. You will play a critical role in delivering complete, real-world systems and solutions to our customers. Applications Engineer Primary Functions • Pre and post sales support for automation, PLCs, drives, motion control, and machine vision products and services., • Assist customers with proof of concept for automation, PLCs, drives, motion control, and machine vision applications., • Assist sales and account managers as necessary to close business., • Phone and On-Site customer support., • Preparation and execution of product training classes including development of course and materials., • Attend vendor training classes as offered and/or required., • Maintenance, appearance and upgrades to demos., • Weekly engineering activity report and schedule., • Target and plan for minimum $20K annual engineering and training billings., • Minimum 2 customer calls per week, whether technical or sales., • Monitor and complete assigned Engineering Tasks, • BS Engineering or equivalent technical degree, • Knowledge of automation, PLCs, drives, motion control, and machine vision applications, • Advanced computer skills: Windows, VM Ware, Networking, • Knowledge of Siemens programming and HMI software a plus, • Ability to operate a motor vehicle We are an equal opportunity employer offering competitive compensation and benefits package including health, disability, life insurance, 401(k) and long-term disability plans. Salary Range $75,000 - $125,000 annually About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionDescription: Position Title: Continuous Improvement Engineer Reports To: Director of Plant Engineering FLSA Status: Exempt Job Grade: 9 Pay Range: $94,000-$134,000 Position Overview: The Continuous Improvement (CI) Engineer is responsible for identifying, analyzing, and driving the reduction of process losses and inefficiencies across all production areas. This role combines data-driven engineering with Lean Six Sigma methodologies to optimize performance, reduce waste, enhance quality, and improve overall operational reliability. The CI Engineer partners cross-functionally to design and implement sustainable systems that promote continuous learning, process discipline, and long-term cost savings. Key Responsibilities Process Loss Reduction & Data Analysis • Lead data collection, analysis, and model development to identify and quantify losses throughout the facility (mass balance, product yields, line efficiencies, downtime, waste, etc.)., • Partner with Finance to ensure accurate accounting and financial impact of losses., • Design, implement, and maintain tracking systems and dashboards for product loss, scrap, and process performance data., • Lead root cause analysis and corrective/preventive action plans to eliminate recurring losses., • Lead and support site-wide CI initiatives across safety, quality, productivity, and cost optimization., • Apply Lean Six Sigma and structured problem-solving techniques to identify and eliminate process waste., • Develop and coach standard work, time studies, cycle time optimization, SMED, and line balance analysis., • Establish and sustain daily management systems, tiered meetings, and KPI routines to reinforce accountability and performance improvement., • Collaborate with engineering, production, and maintenance to ensure systems (CIP, fillers, processing, filtration, etc.) are optimized to minimize product and utility losses., • Verify that high-solids streams are properly managed and that drain losses are minimized., • Support implementation of automation and digital transformation projects., • Train and mentor employees on continuous improvement principles., • Support initiatives in energy and water consumption reduction., • Recommend and support process control improvements through updates to procedures, drawings, and automation logic (experience with CAD, SolidWorks, or PLCs a plus)., • Partner closely with Quality, Finance, Engineering, and Production to align improvement priorities with business goals., • Support and facilitate kaizen events and project-based initiatives focused on yield improvement and waste reduction., • Bachelor’s Degree in Engineering (Chemical, Mechanical, Industrial, or related technical discipline)., • 3+ years of experience in food, beverage, or chemical process manufacturing., • Proven track record of leading cross-functional projects focused on process optimization and waste reduction., • Strong analytical, statistical, and problem-solving skills; data-driven mindset., • Develop, track, and report key production metrics (OEE, yield, downtime, rework, etc.)., • Working knowledge of process flow, fluid mass balance, and manufacturing systems., • Excellent interpersonal, communication, and presentation skills., • Demonstrated ability to manage multiple projects and priorities in a fast-paced environment., • Strong financial acumen to translate process improvements into measurable business impact., • Proficiency in Excel, Power BI, and process mapping tools (Visio, Minitab, etc.), • Lean Six Sigma Green or Black Belt certification., • Experience in aseptic/dairy processing including UHT, homogenization, separation, filtration, and CIP systems., • Familiarity with updating P&IDs and mechanical/electrical drawings (CAD/SolidWorks)., • Working understanding of PLC logic and automated control systems., • Prior experience implementing daily management systems or operational excellence frameworks. · Ability to navigate all areas of the facility, including office spaces, warehouse areas, and the exterior perimeter. · Must wear required personal protective equipment (PPE) as necessary to safely perform job duties. · Ability to stand, sit, and carry out tasks throughout a full shift, with appropriate meal breaks. · Physically capable of standing, bending, stooping, kneeling, reaching, twisting, lifting, pushing, pulling, climbing, balancing, and crouching as needed. · Able to lift and move items weighing up to 50 pounds independently and heavier objects with reasonable accommodations. · Visual acuity sufficient to perform job duties accurately. · Capable of assessing weights, judging distances, and working at various heights. Work Schedule: Typically, Monday-Friday 7am-4pm with flexibility to support a 24/7/365 operation as needs arise. Compensation: At Cayuga Milk Ingredients, we value a fair and comprehensive approach to compensation. Our wage range for this role is determined by various factors, including skill sets, experience, training, licensure, certifications, and organizational needs. It is not typical for an employee to start at or near the top of the range for the position. Compensation decisions are made based on individual job circumstances considering skill level, previous experience, and education requirements. Equal Opportunity Employer: Cayuga Milk Ingredients is committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all aspects of employment, including recruitment, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Non-Discrimination Policy: The contractor will not discriminate against employees or applicants for discussing or disclosing their own pay or the pay of others. However, employees with access to compensation information as part of their job duties are prohibited from disclosing this information to unauthorized individuals, except in specific circumstances outlined by applicable laws and regulations (41 CFR 60-1.35(c)). General Statement: All Cayuga employees recognize that the success and prosperity of the company is everyone’s responsibility. All employees are expected to treat each other in a positive, respectful, and professional manner, to be at work for their assigned shift and to work safely as a team. Employees must be self-starters who can relate to all levels of the organization. Disclaimer: o All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. o This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. o The company reserves the right to add to or revise an employee's job duties at any time at its sole discretion. o This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship. Requirements:

Design and develop comprehensive mechanical HVAC systems for building projects. Prepare engineering contract documents and calculations using CADD tools and HVAC design software. Minimum of 7 years of experience in the architecture/engineering industry, with a focus on mechanical (HVAC) design.

Job Description: We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. Key Responsibilities: * Define and develop RF system architectures for radar and advanced sensing applications. * Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance. * Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics. * Conduct trade studies and system optimization to balance performance, cost, and schedule. * Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems. * Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment. * Perform root cause analysis of system performance issues and recommend design changes. * Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans. * Provide technical mentorship to junior and mid-level RF engineers. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: * Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred). * 10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms. * Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity. * Demonstrated experience deriving and validating system-level RF budgets. * Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar. * Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations. * Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing. * Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters). * US Citizenship with the ability to obtain and maintain a security clearance. Preferred Skills: * Experience in phased-array architectures and beamforming. * Knowledge of military/aerospace standards and environmental testing. * Strong communication skills for customer and internal design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: * Medical, vision and dental insurance for employees and dependents * Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability * 401(k) with immediate vesting on employer match * Tuition assistance * Student loan assistance * Wellness account, Care.com subscription and employee assistance programs * Employee stock purchase program with employer match About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job Description: We are seeking a Senior RF Engineer to design, develop, and test discreet transmit/receive (Tx/Rx) RF modules for advanced radar applications. The ideal candidate will have a strong background in RF circuit design, system integration, and performance optimization, with hands-on experience in taking designs from concept to production. Key Responsibilities: * Design, simulate, and develop discreet RF Tx/Rx modules for radar systems. * Conduct RF system-level analysis, link budget calculations, and trade-off studies. * Select and integrate components such as mixers, amplifiers, oscillators, and filters. * Perform schematic capture, PCB layout reviews, and work closely with layout engineers to ensure optimal high-frequency performance. * Conduct laboratory testing, tuning, and validation of RF modules against specifications. * Collaborate with cross-functional teams including firmware, mechanical, and systems engineering to ensure seamless product integration. * Support troubleshooting and root cause analysis for performance anomalies. * Maintain comprehensive documentation for design decisions, test results, and compliance requirements. Compensation Range: $99,100 - $128,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: * Bachelor’s degree in Electrical Engineering, RF Engineering, or related field. * 5–8 years of experience in RF design, with a focus on radar or similar high-frequency applications (L,S,C, and X band). * Proficiency in RF simulation tools (e.g., Keysight ADS, HFSS, CST, or similar). * Proficiency in schematic capture and PCBA layout tools (e.g. Altium Designer, PADS, Allegro) * Hands-on experience with RF test equipment (VNA, spectrum analyzers, signal generators, power meters). * Solid understanding of RF/microwave circuit theory, impedance matching, noise figure, and gain optimization. * Experience with PCB design for RF and microwave circuits. * Familiarity with military or aerospace standards for RF systems is a plus. * US Citizenship and ability to obtain/maintain a security clearance. Preferred Skills: * Knowledge of phased-array radar architectures. * Electronics packaging concepts * Familiarity with thermal and mechanical considerations in high-frequency module packaging. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: * Medical, vision and dental insurance for employees and dependents * Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability * 401(k) with immediate vesting on employer match * Tuition assistance * Student loan assistance * Wellness account, Care.com subscription and employee assistance programs * Employee stock purchase program with employer match About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Develop and maintain manufacturing process documentation, including but not limited to Manufacturing Process Specifications, Device History Records, Tooling/Equipment Specifications, Preventive Maintenance, and Calibration procedures through Engineering Change Management (ECM) process. Represent man

As an R&D Mechanical Engineer, you will be responsible for: * Executing the design analysis, or evaluation of assigned projects using engineering principles and adhering to business standards, practices, procedures, and product/program requirements * Working with an interdisciplinary team to execut

This position is field based at our project construction sites. Bachelor’s degree in construction management, Renewable Engineering, Engineering or other related fields. Previous internship in solar and/or construction management highly desired.

Interface with Systems Engineering and other disciplines to develop/define/implement customer requirements. Identify, manage, and solve problems associated with mechanical engineering work products. Application of mechanical engineering principles for the design and development of mechanical compone

The Junior Packaging Engineer plays a key role in supporting the design, development, and implementation of packaging solutions that meet product protection, cost efficiency, and sustainability goals. The Junior Packaging Engineer works closely with cross-functional teams including product developme

Collaborate with senior bridge engineers and multidisciplinary project teams. Bachelors degree in Civil Engineering (structural concentration preferred). This is a fantastic opportunity for a bridge engineer looking to.

We're a group of engineers and scientists who've built well-known products, created large OSS projects, started productive businesses, won olympiad medals, and published significant research (e. Get notified about new Technical Support Engineer jobs in. Quality Systems and Continuous Improvement Eng

If you’re an experienced structural engineer who enjoys. Collaborate with senior bridge engineers and multidisciplinary project teams. Bachelor’s degree in Civil Engineering (structural concentration preferred).

As a Combat Engineer, youll work quickly and skillfully to help Soldiers navigate while on combat missions by constructing bridges, clearing barriers with explosives, and detecting and avoiding mines and other environmental hazards. You'll provide expertise and come up with quick and creative engine

Proven experience (6+ years) in database engineering, administration, and management.

The Data Engineering team at Imprint is responsible for building and scaling the data infrastructure that supports product development, analytics, operations, and machine learning across the company. Collaborate with stakeholders across Product, Analytics, Finance, and Engineering to ensure timely a

Staff Software Engineer Remote Job Duties: • Implement and evolve a Data Lake storage system with low latency and high throughput for bulk data ingestion and query • Implement metadata, data governance, security, and acce

The engineer will be a member of the Mechanical Engineering team responsible for the development of mechanical systems and assemblies across various ground based, shipboard and airborne military radar platforms. Demonstrated ability to resolve issues during design, development and execution of mecha

Electrical Engineer Job Duties: Evaluates electrical systems, products, components, and applications by designing and conducting research programs; applying knowledge of electricity and materials. Pr

Local and generally accepted design and engineering standards. Bachelor's degree in civil engineering from an ABET accredited institution. A Fundamentals of Engineering (F.

Collaborate cross-functionally with data scientists, business users, project managers and other engineers to achieve elegant solutions. Work alongside other engineers on the team to elevate technology and consistently apply best practices.

Job Category: Civil Engineer Planner Project Engineer Transit Transportation. This position will work on a variety of projects and interact with traffic engineers, highway engineers, transportation planners and our clients. Lead or assist with multidisciplinary projects involving architecture, mecha

Mechanical Engineer Job Duties: Designs mechanical and electromechanical products and systems by developing and testing specifications and methods. Provides engineering information by answering questions and

Professional Engineer (required). Bachelors of Engineering (required). Creighton Manning, a GAI Company is seeking a talented Civil-Site Project Engineer.

Civil Engineer Job Duties: Completes construction projects by preparing engineering design and documents and confirming specifications. Prepares engineering design by collecting and studying

Our traffic engineers work on a variety of projects and interact with transportation planners, highway engineers, transit professionals, structure engineers and our construction inspection staff. We are seeking a qualified Project Engineer with 2-5 years' experience to become a part of our growing T

Develop plans for surface transportation projects, according to established engineering standards and state or federal construction policy.

If youre an experienced structural engineer who enjoys. Collaborate with senior bridge engineers and multidisciplinary project teams. Bachelors degree in Civil Engineering (structural concentration preferred).

Process Engineer Job Duties: Oversees and assesses existing processes and workflows.

The engineer will be a member of the Mechanical Engineering team responsible for the development of mechanical systems and assemblies across various ground based, shipboard and airborne military radar platforms. Bachelor of Science Degree in Mechanical Engineering. Demonstrated ability to resolve is

System Engineer Job Duties: Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure).

Application of mechanical engineering principles for the design and development of mechanical components, assemblies and systems. Interface with Systems Engineering and other disciplines to develop/define/implement customer requirements. Incorporate Mechanical Engineering best practices Design for C

Operations Engineer Job Duties: Identifies operational problems by observing and studying system functioning and performance results; investigating complaints and suggestions; interviewing process supervi

As a Combat Engineer, youll work quickly and skillfully to help Soldiers navigate while on combat missions by constructing bridges, clearing barriers with explosives, and detecting and avoiding mines and other environmental hazards. You'll provide expertise and come up with quick and creative engine

Operations Engineer Job Duties: Identifies operational problems by observing and studying system functioning and performance results; investigating complaints and suggestions; interviewing process supervi

Process Engineer Job Duties: Oversees and assesses existing processes and workflows.

What you'll do: The Senior Power System Controls Engineer will provide field service systems integration engineering and technical consultation for customers and fellow PSC Engineers in the areas of system design, programming, installation, start up, maintenance, repair, training and modification o

Position: Senior System Administrator.Location: Albany, NY (100% Onsite).The ideal candidate will have strong expertise in Windows administration, VMware, and system security best practices.Build, configure, and administer physical and virtual servers.Provision VMs according to business/application

Our client is a multi-disciplinary firm providing architecture, structural and geotechnical engineering, interior design, landscape architecture, and digital modeling and animation services. Collaborate with multi-disciplinary teams, including structural, interior, landscape, and engineering profess

Bachelor’s degree in Architecture, Engineering, or Construction Management, Master’s degree preferred. Architectural or Engineering background with zoning, planning, design, construction administration, compliance, and infrastructure system understanding preferred. The SPM will provide regular r

Linde Engineering Americas (LEA) is a member of the Linde Engineering Division of Linde plc. Experience in engineering, construction, commissioning or start-up of oxygen and nitrogen gas plants is a plus. LEA is a single-source technology, engineering, procurement and construction firm focused on pr

Architectural or Engineering background with zoning, planning, design, construction administration, compliance, and infrastructure system understanding preferred. The SPM will provide regular reporting and data analytics to the head of Engineering, Design, and Construction. Builds tracking and repor

Manager, R&D Project Management.At Baxter, we believe every personregardless of who they are or where they are fromdeserves a chance to live a healthy life.It was our founding belief in 1931 and continues to be our guiding principle.We are redefining healthcare delivery to make a greater impact toda

Linde Engineering Americas (LEA) is a member of the Linde Engineering Division of Linde plc. Linde Engineering North America LLC. LEA is a single-source technology, engineering, procurement and construction firm focused on providing innovative solutions to customers.