Structural engineering jobs in Los Angeles, California - Page 4Create job alerts

Job DescriptionDescriptionAs a Senior Development Test Engineer at Impulse, you will be responsible for all aspects of test equipment design and test operations while working closely with a fast paced, agile team that produces high-performance spacecraft from clean sheet designs. Responsibilities • Design and build fluid, mechanical and electrical systems in support of liquid rocket propulsion and spacecraft systems testing, • Fully own key test assets and major test programs while collaborating with wide ranging teams across the company, including Redondo Beach and Mojave, • Coordinate with external vendors and contractors to meet project technical and schedule objectives, • Perform test setup, hardware inspections, checkouts and troubleshooting as needed, • Conduct test operations geared toward rapidly developing hardware for spaceflight, • Resolve technical issues with innovative and resourceful solutions Minimum Qualifications • Bachelor’s degree in mechanical, aerospace, electrical engineering or related field, • 5+ years of experience in hardware development testing, • Strong engineering fundamentals in thermal, structural, and fluids analysis, • Prior hands-on operational experience working with aerospace test facilities, • Previously demonstrated ownership of test stand design and build-up, • Able to create and clearly communicate fluid P&IDs, electrical and controls schematics, • Able to identify and procure appropriate test equipment, • Proficient with data acquisition and control methods, • Demonstrated ability of taking project ownership and working well in small teams Preferred Skills and Experience • Demonstrated prior experience working with complex systems including cryogenic propellants, high pressure gas systems, hydraulics and/or combustion devices, • Demonstrated working knowledge of components (valves, regulators, sensors, power supplies) and hands-on skills (tube fabrication, metalworking, wiring), • Demonstrated hardware testing experience with rocket engines, or spacecraft, • Experience in a startup or agile development environmentAdditional Requirements: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Company Overview: Second Order Effects (SOE) is an engineering consulting firm that transforms uncertainty into fully functional hardware and software. We work on projects at all stages of development; we perform analysis, build prototypes, and take products to market. Our team solves high-impact problems across numerous industries, including automotive, aerospace, consumer electronics, industrial automation, biomedical, and green energy. Our designs control rocket engines, manage satellite communications, instrument fusion reactors, and are enjoyed by consumers around the world. The only thing we won't build is weapons. Founded in 2016, Second Order Effects has 50+ employees (and counting!) in offices in El Segundo, California and Redmond, Washington. We've worked with >130 clients on > 300 projects as a partner, on retainer, or on demand. How do we do this? We empower others, build the right thing, lead with curiosity, and own the outcome. Learn more at soeffects.com! Job Overview: As a Mechanical Engineering Intern, you will play a hands-on role in designing, developing, and testing complex mechanical systems for customer-facing projects. In this role, you will contribute to the full development lifecycle- from initial concept and simulation through prototyping, validation, and integration. Whether it's designing mechanisms and enclosures, performing structural analysis, or designing precision assemblies for manufacturability, you'll be making real contributions to complex systems. This internship is designed to accelerate your technical growth, giving you the chance to build a strong foundation in mechanical engineering while making an immediate impact. What You Will Do: • Ownership: Contribute to the design of mechanical systems for customers across various industries, • Technical Mentorship: Partner closely with a mentor who will provide technical guidance, feedback, and support throughout the entire internship, • Design & Analysis: Utilize CAD and simulation tools to develop structural, thermal, and tolerance analyses for electromechanical assemblies, using both hand calculations and FEA, • Thermal Management: Design and analyze active and passive thermal management systems for custom electronic systems and packaging solutions, • Current enrollment in college (Mechanical Engineering, Aerospace Engineering, Physics, Robotics, or related field), • Experience in designing, modeling, simulation, and testing of electromechanical components or assemblies, • Experience with hand calculations, finite element analysis (FEA), and computer-aided design (CAD), • Demonstrated passion and curiosity for mechanical engineering, • Strong problem-solving skills and initiative to overcome technical challenges, • Experience in team-based design and build projects (e.g., Formula SAE, Solar Car, CubeSat, Rover Challenge, etc.), • Familiarity with circuits and electrical engineering fundamentals, • Familiarity with manufacturing processes, such as machining, injection molding, water jetting, electro-discharge machining, and 3D printing, • Familiarity with generating thermal models for electronic assemblies; experience with thermal analysis of electronic devices with FEA and CFD modeling, • Experience with high-precision 3D printing processes and design for complex systems, • Ability to analyze and estimate structural loading from environmental sources, • Experience with fatigue and thermal testing of electromechanical assemblies, • Compensation range of $69,350-$69,850, • Flexible work hours and work from home policy, • 100% employer-paid health insurance (Medical, Dental, Vision) for employees + 50% dependent coverage, • Accrued paid time off policy, accrued sick days policy, and paid company holidays, • 401(k) retirement account and employer matching (Safe Harbor 4%), • Housing stipend bonus, • Electric Vehicle (EV) charging ports, • Applicants must be able to commit to a 12 to 16 week internship between May 18, 2026 to September 11, 2026, • Applicant must be willing to work 40 hours a week on-site in El Segundo, California, USA, • Applicant must be eligible to work on export controlled projects

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Additive Technology team operates at the frontier of research and development, where creativity meets capability. This is an R&D-driven environment where problems are open-ended and solutions are yours to define. You'll work alongside welders, robotics engineers, data scientists, and systems engineers at the intersection of hardware and software, creating an end-to-end additive manufacturing platform that serves a wide variety of applications. From exploring new materials to unlocking faster print speeds, to designing complex, organic geometries that can't be built any other way, it's high-impact work that sets the foundation for the future of additive manufacturing. About the Role: • Develop, refine, and implement digital workflows for optimization-driven part design in additive manufacturing. This includes simulation, optimization, and manufacturability verification to ensure innovative and efficient solutions tailored to the unique capabilities of additive processes, • Collaborate with multidisciplinary teams to define design requirements and translate them into simulation-driven workflows supporting manufacturable geometries, • Perform structural analysis and optimization of metal components for additive manufacturing - ensuring efficient material usage and compliance with mechanical requirements, • Lead design exploration studies to generate and assess high-performance design alternatives and iteratively refine designs using advanced digital tools and collaborative workflows for optimal manufacturing readiness, • Leverage AI/machine learning for modeling and simulation workflow optimization: identify, develop and deploy algorithms to drive faster design and simulation cycles, • Document and present technical findings to engineers, managers, and stakeholders, • Evaluate new technologies and software relevant to metal AM simulation and structural optimization, • Bachelors Degree or higher in Mechanical Engineering, Aerospace Engineering, or other related field., • 5+ years of relevant experience, • Proficiency in computational modeling and optimization algorithms for structural evaluation and design automation, • Strong programming or scripting skills (e.g., Python, C#, Grasshopper, C/C++) for workflow automation and advanced simulation setup, • Demonstrated experience with modeling and simulation software (e.g., Siemens NX, Rhino, Abaqus, ANSYS, Nastran, OptiStruct, Tosca) with a proven track record in topology optimization and/or generative design for AM, • Experience with automated and dynamic meshing techniques, • 8+ years of relevant experience, • Understanding of metal additive manufacturing processes and their impact on design constraints, material behavior, and post-processing needs, • Experience with multi-disciplinary or multi-physics optimization, • Experience interfacing with engineering, testing, and manufacturing groups to understand system designs and the associated constraints Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$130,000—$166,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job Description Ready to level up your structural engineering career? We're looking for a talented Senior Engineer who's passionate about innovative design and ready to lead projects that push boundaries. If you've got 6+ years of experience and a drive to create extraordinary structures, let's talk! Who We Are: We're Holmes US - a structural engineering firm that's anything but boring! With offices across the West Coast and roots in New Zealand, we're known for taking on projects that make other firms say, "Wait, how did they do that?" Your Impact: • Lead project teams from concept through construction, • Develop innovative structural solutions, • Manage client relationships and project deliverables, • Mentor rising engineers and foster team growth, • Drive quality control and technical excellence, • 6+ years in structural engineering consultancy, • PE license and actively working towards SE license if not already obtained, • B.S. or M.S. in Civil/Structural Engineering, • Strong seismic design experience, • Advanced skills in ETABS, SAP, RISA, • A knack for leading teams and mentoring others 🌟 Engineering That Excites • Lead innovative, challenging projects that matter, • Work with industry leaders from the US and New Zealand, • Access cutting-edge design tools and approaches, • Lead project teams and mentor rising engineers, • Regular professional development opportunities, • Flexible hybrid work environment, • Work-life balance that we actually take seriously, • Supportive, collaborative culture Depending on your employment status, benefits may include: • Hybrid work model, • Comprehensive Medical, Dental, Vision, Life, AD&D, Short-term and Long-term Disability and other voluntary plans, • Flexible Spending Accounts for Medical & Childcare, • Health Savings Account, • Pet Insurance, • Employee Assistance Program, • Paid Time off - Vacation, Sick, Personal Leave, Family Leave for new parents, and Community Service time, • Paid Holidays, • Pre-Tax Commuter Transit, • 401(k) retirement savings with Company contribution, • Company sponsored events Our Commitment: At Holmes, we believe in building teams as diverse as the communities we serve. We provide equal support and opportunities for all our people to thrive, grow, and develop. Dream big - we'll help you get there! Ready to design the future with us? Apply now and join a team where technical excellence meets real innovation. Powered by JazzHR GOcT1K5VH0

Job Description Summary Our client is seeking a Senior Structural Engineer to join our award-winning team in Downtown Los Angeles. This position involves advanced structural analysis and design for buildings and other structures subjected to seismic loads. You'll work under the supervision of licensed engineers and collaborate on a wide range of high-profile, challenging projects. Duties and Responsibilities * Perform structural engineering design and analysis for buildings and seismic-resilient structures. * Use finite element software and engineering judgment for technical solutions. * Support multidisciplinary design teams and deliver high-quality engineering outcomes. Requirements * Masters degree in Civil Engineering or a related field. * Advanced knowledge in: * Structural analysis & design * Steel and concrete design * Structural dynamics or earthquake engineering * Finite element analysis tools * Demonstrated proficiency and technical excellence in structural engineering. Benefits * Competitive salary and comprehensive benefits: * Medical, dental, vision, and life insurance * 401(k) retirement savings plan * Paid sick leave, vacation, and holidays * Professional development support: * PE/SE exam reimbursement * Transportation allowance or on-site paid parking Employment Type: Full time Location: Los Angeles, CA

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Machine Shop team delivers high-precision, high-quality machined components that are critical to Terran R's success. Here, you'll combine technical skill with creativity, collaborating closely with engineering and design teams to drive better part designs and manufacturing solutions. You'll work with best-in-class, premium machinery and get to bring our expanded, state-of-the-art machine shop to life to support the scale and pace of the Terran R program. This role offers the rare chance to see your craftsmanship directly integrated into flight hardware, making an immediate impact. With clear training pathways, you'll have opportunities to advance from operating machines to programming them, growing your career alongside the program. About the Role: • Own all machining operations company-wide, including the engine and vehicle machining work centers supporting propulsion and vehicle hardware., • Lead and scale a high-performing organization across programming, machine operation, manufacturing engineering, and shop floor leadership to deliver high-complexity, tight-tolerance parts at rate., • Drive execution and rigor in daily operations, ensuring production adheres to schedule, cost, quality, and safety standards while quickly resolving constraints and disruptions., • Develop and implement long-term machining strategy, including capital planning, asset utilization, shift structure, and capacity planning to meet program milestones and future rate demands., • Partner cross-functionally with design engineering, manufacturing engineering, supply chain, and quality to ensure part manufacturability, robust process capability, and supplier alignment., • 12+ years of experience in machining or precision manufacturing, with at least 7 years in a leadership role over multiple teams or machining centers., • Proven experience managing multi-axis CNC operations, high-precision part production, and end-to-end ownership of machining workflows., • Demonstrated success scaling machining throughput, improving cycle times, and optimizing machine utilization in a fast-paced, high-mix environment., • Strong understanding of manufacturing engineering principles, DFM, GD&T, tooling strategy, and machining best practices for aerospace-grade materials (e.g., Inconel, titanium, aluminum)., • Background in aerospace propulsion or spaceflight machining, including components for engines, tanks, or structural assemblies., • Experience implementing digital machine monitoring, MES, and tool life management systems to support traceability and predictive maintenance., • Expertise with lean manufacturing, Six Sigma, and automation strategies applied to high-precision machining environments. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$240,000—$307,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Propulsion team at Relativity is responsible for the successful development of the engines that will power the Terran R vehicle. We own their design from concept through to launch and reuse. Our team partners heavily with Manufacturing, Test, Launch, and Integration teams, striving to develop our engines in record time and to support Terran R's first launch in 2026. As part of this team, you will help build, test, and iterate on the full product lifecycle of our Aeon-R engine systems, seeing them mature and eventually bring Terran R into space. About the Role: • Responsible for the thermal, structural, dynamic, and durability (fatigue/fracture) analyses on Aeon-R engines to guide design decisions and ensure reliability and performance requirements are met, • Responsible for the analysis of 3D-printed engine components, complex mechanical assemblies, and/or the structural integrity of the fully integrated engine assembly, • Work hand-in-hand with mechanical designers and manufacturing engineers to arrive at optimal solutions for the engine and vehicle programs, • Bachelor's degree in a science, engineering, technology, or mathematics field, • 12+ years of relevant analysis experience, preferably with complex engineering systems, • Experience with Finite Element Analysis, • Experience with computer aided design (CAD) software, • Detail-oriented, organized, and able to follow through, • Strong drive to deliver on ambitious schedules, • Experience with design of liquid propulsion components and systems, • Experience with Siemens NX, Teamcenter, and ANSYS workbench, • Familiarity with industry best practices Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$196,000—$253,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The propulsion team at Relativity is responsible for the successful development of the engines that will power the Terran R vehicle. We own their design from concept through to launch and reuse. Our team partners heavily with manufacturing, test, launch, and integration teams, striving to develop our engines in record time and to support Terran R's first launch in 2026. As part of this team, you will help build, test, and iterate on the full product lifecycle of our Aeon-R engine systems, seeing them mature and eventually bring Terran R into space. About the Role: • Responsible for the thermal, structural, dynamic, and durability (fatigue/fracture) analyses on Aeon-R engines to guide design decisions and ensure reliability and performance requirements are met, • Responsible for the analysis of 3D-printed engine components, complex mechanical assemblies, and/or the structural integrity of the fully integrated engine assembly, • Work hand-in-hand with mechanical designers and manufacturing engineers to arrive at optimal solutions for the engine and vehicle programs, • Bachelor's degree in a science, engineering, technology, or mathematics field, • 2+ years of relevant analysis experience, preferably with complex engineering systems, • Experience with Finite Element Analysis, • Experience with computer aided design (CAD) software, • Detail-oriented, organized, and able to follow through, • Experience with design of liquid propulsion components and systems, • Experience with Siemens NX, Teamcenter, and ANSYS workbench, • Familiarity with industry best practices Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$112,000—$143,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Avionics team is responsible for the full lifecycle of Terran R's nervous system, designing, building, testing, installing, and operating the hardware that connects and controls every major electrical system on the vehicle and ground. The team's structure intentionally combines avionics design, manufacturing, and test to enable rapid iteration and feedback loops. Engineers are deeply embedded into other functions within Relativity, working closely with propulsion, GNC, fluids, and stage engineering teams to ensure seamless integration and operation. Now is a unique time to join: you'll get to help shape Terran R's fundamental avionics architecture and be given a high degree of ownership on components that will fly. About the Role: • Own the design, analysis, and test/validation of mechanical products within the Terran R avionics system. Mechanical products include electronics enclosures, vibration isolation, thermal management, and environmental protection devices, • Collaborate with electrical engineers to design robust, high-performance printed circuit board assemblies, • Perform preliminary sizing for static and dynamic loads and thermal environments., • Utilize 3D modeling and 2D drafting packages to deliver detailed designs with considerations for production and test, • Minimum of 2+ years of experience in a full cycle mechanical design engineering role, • Bachelor's degree in mechanical engineering, aerospace engineering, or related field, • Experience with 3D computer-aided design (CAD) software, • Experience with structural and thermal analysis, • Experience with the design of electronic assemblies, batteries, and/or vibration isolation systems, • Experience with finite element analysis methods, • Applied knowledge of geometric dimensioning and tolerancing (GD&T) Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$112,000—$143,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Avionics team is responsible for the full lifecycle of Terran R's nervous system, designing, building, testing, installing, and operating the hardware that connects and controls every major electrical system on the vehicle and ground. The team's structure intentionally combines avionics design, manufacturing, and test to enable rapid iteration and feedback loops. Engineers are deeply embedded into other functions within Relativity, working closely with propulsion, GNC, fluids, and stage engineering teams to ensure seamless integration and operation. Now is a unique time to join: you'll get to help shape Terran R's fundamental avionics architecture and be given a high degree of ownership on components that will fly. About the Role: • Own the packaging, design, analysis, test, and validation of secondary structure within the Terran R Avionics system. Secondary structure includes trays, brackets, dynamic isolation, thermal management, and environmental protection components., • Collaborate with Avionics, Fluids, Dynamics, Thermal, Structures, and Vehicle Integration engineers to design robust secondary structure that meets mission requirements., • Perform modal and structural analysis of hardware to static, dynamic, and thermal environments., • Utilize 3D modeling and 2D drafting packages to deliver detailed designs with considerations for production and test., • Minimum of 2 years of experience in a full cycle mechanical or structural design engineering role, • Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or related field, • Experience with 3D computer aided design (CAD) software, • Experience with structural and thermal analysis, including finite element analysis methods, • Proficient with NX/Teamcenter CAD package, • Proficient with Ansys and/or FEMAP FEA packages, • Applied knowledge of geometric dimensioning and tolerancing (GD&T) Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$112,000—$143,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Avionics team is responsible for the full lifecycle of Terran R's nervous system, designing, building, testing, installing, and operating the hardware that connects and controls every major electrical system on the vehicle and ground. The team's structure intentionally combines avionics design, manufacturing, and test to enable rapid iteration and feedback loops. Engineers are deeply embedded into other functions within Relativity, working closely with propulsion, GNC, fluids, and stage engineering teams to ensure seamless integration and operation. Now is a unique time to join: you'll get to help shape Terran R's fundamental avionics architecture and be given a high degree of ownership on components that will fly. About the Role: • Own the design, analysis, and test/validation of mechanical products within the Terran R avionics system. Mechanical products include electronics enclosures, vibration isolation, thermal management, and environmental protection devices, • Collaborate with electrical engineers to design robust, high-performance printed circuit board assemblies, • Perform preliminary sizing for static and dynamic loads and thermal environments., • Utilize 3D modeling and 2D drafting packages to deliver detailed designs with considerations for production and test, • Minimum of 5+ years of experience in a full cycle mechanical design engineering role, • Bachelor's degree in mechanical engineering, aerospace engineering, or related field, • Experience with 3D computer-aided design (CAD) software, • Experience with structural and thermal analysis, • Experience with the design of electronic assemblies, batteries, and/or vibration isolation systems, • Experience with finite element analysis methods, • Applied knowledge of geometric dimensioning and tolerancing (GD&T) Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$142,000—$181,500 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Tooling and Factory Automation team sits at the intersection of design, manufacturing, and automation, making everything from large-scale structural fixtures to small tools that directly enable Terran R's production. As a design group embedded within the manufacturing organization, we dig deep into the needs of our internal partners to understand root problems, propose solutions, and deliver hardware to help build faster, scale smarter, and work better. The team is also at the forefront of Relativity's growing factory automation efforts, an increasingly critical part of scaling production of Terran R at existing and future facilities. You'll have the autonomy to make decisions, field solutions, and see them in action on the factory floor. Ultimately, you're not just designing tools or automated processes; you're defining how rockets and factories get built. About the Role: The Mechanical Design Engineers are responsible for the design and development of tools and factory automation equipment that support manufacturing. The Mechanical Engineering team works closely with Design and Manufacturing, turning top-level requirements and concepts into functional delivered equipment. The Mechanical Design Engineering team brings a high level of innovation and ingenuity into the design process, as they are tasked with building out a highly automated production facility. • Develop high quality development and production tooling and automation solutions for the Terran vehicle and Aeon engine programs, • Capable of integrating concepts and principles of mechanical design and analysis of several different projects in a fast-paced environment - projects will vary in size and scale, • Ability to interpret and apply sound design and drafting standards (ASME Y14.5) in creating tooling drawing definitions, • Handle a wide range of technical problems and familiar with all types of material handling, assembly fixtures, off-loaders, rotisseries, test fixtures, structural weldments, environmental chambers, and custom machines, • Close collaboration with component designers, manufacturing engineers, and integration engineering to achieve the best possible cradle to grave metrics (safety, cost, quality, cycle time, delivery, reliability, life, and maintenance/refurbishment), • Bachelor of Science degree in manufacturing engineering, mechanical engineering or equivalent, • 10+ years of work or project experience with design, build, and commissioning of tooling and fixtures for manufacturing, assembly and test, • Experience using CAD and FEA-based analysis software (NX and ANSYS Workbench preferred) for structural applications, • Experience in full-cycle project completion, • Strong expertise in design for manufacturability and design for assembly including experience taking products from prototype design to production, • Solid understanding of common manufacturing materials, GD&T, and tolerance/stack-up analysis, • Solid understanding of common manufacturing processes and machines including mills, lathes, welding, sheet-metal bending, lifting/rigging, assembly, inspection, etc. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$155,000—$197,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job DescriptionCompany Description At KPFF Consulting Engineers, we are more than just an engineering design firm. For over 60 years, we have dedicated ourselves to innovative, sustainable engineering that shapes the built environment and tackles complex infrastructure challenges. Our team culture emphasizes balance, growth, and well-being, supporting each member’s professional journey with flexibility, generous benefits, and a collaborative approach to work-life integration. With over 1,400 professionals across 27 offices nationwide, KPFF’s decentralized structure allows each office the flexibility to pursue projects aligned with their regional strengths. Learn more at . Job Description KPFF is looking for full-time structural engineering professionals who are self-motivated and eager to deepen their knowledge of structural engineering while gaining real-world experience. Our engineers work in a team structure that allows frequent collaboration and connection to all layers of our organization, from interns to Principals. We foster a culture where our engineers collaborate outside of the project work through social events, educational programs and technical training. We provide numerous opportunities for professional growth, learning, and teaching. Individual accomplishments and successful projects determine your future at KPFF, and your dedication and talent will drive your career here. This is an Exempt employment position, all overtime hours are paid at an hourly rate. Benefits KPFF is proud to provide our employees with benefits options that fit their unique lives, including: • Medical insurance options to choose from, VSP Vision Insurance, and Delta Dental Insurance, • 7 paid holidays, and 2 floating holidays for you to use each year, • 2 weeks vacation annually, with competitive seniority based accruals, • 2 weeks of personal and sick time to care for yourself and your family members, • KPFF will contribute 3% of your base salary to your 401 (k) regardless of your contribution, • KPFF Paid Family Leave: Provides 60% of your base salary while on an approved leave for up to 6 weeks in a rolling 12-month period, • 40-hour work schedule, Monday through Friday, • Flexible scheduling - core hours of collaboration are 9:30-3:30 PM, • Those who receive their PE or SE at KPFF will receive a bonus in addition to testing fee reimbursement, • Monthly Cell Phone stipend, • Monthly Way We Work stipend for remote work and transit expenses, • Semi-annual Bonuses, • Basic knowledge of engineering fundamentals, • Excellent interpersonal communication and professional demeanor, • Effectively work on a team with individuals of varying backgrounds and experiences, • Exceptional written and verbal communication skills, • Solid technical skills, • Ability to independently plan, document, organize, and engage in problem solving Pay Range is $92,000-$125,000 salary depending on education, experience, and licensure. Qualifications Minimum Qualifications • BS in Civil Engineering (with an emphasis in Structures), • Transcripts must show completed courses in:, • Concrete, • Steel or Wood Design, • At least 6 years of full-time experience, and currently serving as a structural PM or equivalent is required, • 3.0 Cumulative GPA or above in Bachelor’s coursework, • Master’s degree in Civil Engineering with an emphasis in Structures, • Candidates with transcripts showing completed graduate coursework in:, • Structural Design, • Steel or Wood Design, • Concrete, • Seismic, • SE Certification is preferred Additional Information Application Process If you are interested in this position, please apply on our careers page. Resumes sent elsewhere will not be considered. Transcripts must be provided prior to an interview. Cover letter is preferable and should address the following: • Describe a time when you were assigned a project or task that turned out to be really difficult. How did you work through it, and what was the outcome?, • Duties are performed in a normal office environment while sitting at a desk or computer table., • Duties require the ability to actively engage with a computer for several hours per day., • May occasionally need to lift items up to 15 lbs., • Duties require in-person attendance, Monday through Friday, during our business hours of 8 AM to 5 PM at our office in Downtown Los Angeles for the training period. Our employees are valued and empowered, collaborative and team oriented, innovative in their approach and passionate about their work. They are reliable, trustworthy and open with a high level of integrity. They value diversity, are inclusive and are committed to critically thinking through problems and finding solutions. Our Offices Our Greater Los Angeles Structural office has two locations at the Bloc in Downtown Los Angeles and at the Irvine Towers in Irvine. A warm and friendly environment, we are dedicated to growing with our employees and allowing people to pursue their passions. KPFF Consulting Engineers participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. KPFF Consulting Engineers is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, creed, ethnicity, national origin, religion, marital status, sex/gender (including sexual orientation or gender identity), pregnancy, veteran status, citizenship status, physical or mental disability, or any other protected basis.

Job Description ABOUT ROCKET LAB Rocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. Join our pioneering team and launch your career to new heights! NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! SENIOR MANUFACTURING ENGINEER - FLUID COMPONENTS Based out of Rocket Lab's headquarters in Long Beach, CA the Senior Manufacturing Engineer - Fluid Components is responsible for bringing fluid component designs into the real world and assuring they meet the stringent requirements needed for the Neutron program. You will support the Director of Manufacturing and Production/Fluid Systems organizations by standing up a new component development area, supporting component designs early and leading assembly of Neutron components. WHAT YOU'LL GET TO DO: • Influence the design of critical Neutron components early in the program to aid in producibility, cost and reliability, • Oversee introduction and implementation of new products and product revisions, • When required, lead problem containment and root cause/corrective action investigations, • Quickly analyze and resolve manufacturing discrepancies and non-conformances, • Collaborate with the quality team to identify and drive quality-related initiatives and improvements, • Liaison between production, quality, supply chain and design engineering staff for complex problem solving and process changes, • Lead the continuous improvement process via Lean/Six Sigma tools and techniques, • Develop, introduce, and maintain new planning, production, quality, ERP, data collection and analysis, and other processes where none exist YOU'LL BRING THESE QUALIFICATIONS: • Bachelor's degree in mechanical, manufacturing, aerospace or similar engineering discipline, • 5+ years of experience troubleshooting valves, actuators, regulators or similar fluid components during assembly, functional checkouts or qualification testing THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Previous history of planning, building, activating & operating component test stands for development, qualification and production acceptance testing, • 8+ years of experience troubleshooting valves, actuators, regulators or similar fluid components during assembly, functional checkouts or qualification testing, • Strong knowledge of manufacturing processes common to fluid components, • Experience with assembly & testing of turbomachinery and combustion devices, • Extensive experience using fundamentals of fluid and structural mechanics to solve component issues in a fast-paced environment ADDITIONAL REQUIREMENTS: • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus., • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing, • Must be physically able to commute to buildings, • Occasional exposure to dust, fumes and moderate levels of noise, • Availability to work long hours and weekends as needed based on test and launch schedules Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$115,000—$165,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description ABOUT ROCKET LAB Rocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. Join our pioneering team and launch your career to new heights! NEUTRON Neutron is a medium-lift launch vehicle being developed by Rocket Lab, a publicly traded end-to-end space company. The rocket can deliver the mega constellations of tomorrow, enable interplanetary payloads, and support human spaceflight. As a reusable platform, Neutron will deliver a very cost-effective and reliable launch solution leveraging Rocket Lab's proven history with Electron – the third most launched rocket, worldwide, in 2024. If you're interested in joining an incredible team in a fast-paced and rewarding environment, this is your opportunity. SENIOR COMBUSTION DEVICES ENGINEER II / PRINCIPAL COMBUSTION DEVICES ENGINEER Based out of Rocket Lab's headquarters in Long Beach, CA, the Principal/Senior Combustion Devices Engineer will be responsible for the development of one or more combustion devices (preburners, main injectors, thrust chambers assemblies and vacuum nozzles). These devices are an integral portion of the 200,000 lbf Archimedes engine, which operates in a demanding but efficient ox-rich, staged combustion architecture. In this role, you'll take ownership of all aspects of a component: design and analysis, manufacturing and test support, and successful flights and subsequent, high-cadence, re-flights. By doing so, you will help propel the Neutron rocket, expanding human capabilities in space and providing value to the company and its shareholders. WHAT YOU'LL GET TO DO: • Design, analyze, and perform trades studies to achieve programmatic targets., • Define requirements, test and flight qualification plans., • Work with the interface owners, like turbomachinery and engine systems teams, to make a high-end product that could be iterated fast and seamlessly., • Work with manufacturing and build engineers to design easily manufacturable, cost-effective, beautiful parts., • Work with the test and launch teams to interpret data and provide solutions to enable a high cadence – of tests, flights and re-flights. NOTE: This position can be hired as a Senior Combustion Devices Engineer II or Principal Combustion Devices Engineer Level. SENIOR COMBUSTION DEVICES ENGINEER II, YOU'LL BRING THESE QUALIFICATIONS: • Bachelor's degree in an engineering discipline or equivalent, • 8+ years of combustion device design experience, • In-depth knowledge of combustion and fluid dynamics, heat transfer and structural mechanics., • Fundamental understanding of design principals and manufacturing methods. PRINCIPAL COMBUSTION DEVICES ENGINEER, YOU'LL BRING THESE QUALIFICATIONS: • Bachelor's degree in an engineering discipline or equivalent, • 12+ years of combustion device design experience, • In-depth knowledge of combustion and fluid dynamics, heat transfer and structural mechanics., • Fundamental understanding of design principals and manufacturing methods. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Master's or a PhD., • Advanced proficiency in NX, ANSYS Mechanical, StarCCM, MATLAB and GD&T., • Proficiency in niche software like: TDK, ROCCID, PERCORP, CEA, ROCETS., • Reacting flow CFD., • Expertise in high-speed data/video analysis in time and frequency domains., • Experience with designing reusable, propulsively landing rocket engines., • Experience in an iterative and scrappy development environment. ADDITIONAL REQUIREMENTS: • Must be willing to travel and communicate outside of work hours., • Must be able to work extended hours and/or weekends as needed., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus., • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing., • Must be physically able to commute to buildings. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$113,800—$190,500 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Factory Test team designs, builds, and operates the infrastructure needed to test nearly every part of Terran R right here at our headquarters in Long Beach, CA. This centralized approach provides engineers and technicians with exposure to the entire product lifecycle across a wide range of part sizes and complexities. The scope and scale are significant, with test stands capable of handling millions of pounds of force. Team members lead multiple projects in parallel, avoiding silos and gaining broad technical experience without needing a background in aerospace. With high-impact campaigns ahead, including thrust structure and stage 2 testing, now is the time to join. You won't just execute, but you'll help shape and scale the test infrastructure required to meet the demands of a rapidly growing launch program. About the Role: To support our mission of changing the way rockets are built and flown, you will be responsible for bringing structural test stands from design concept to full operational readiness. The scope of work encompasses a full design cycle, including conceptualization, design, analysis, fabrication, and operation. These test stands range from benchtop fixtures for actuator testing to multi-story steel towers for stage testing. Here are some examples of projects you could be working on: • Design and analysis of steel weldments capable of applying test loads to a variety of hardware, • Creating drawings and work instructions for the assembly of a brand new 3d printed part into a test stand, • Writing and executing test day procedures In order to be successful in this role, you should be someone who enjoys hands-on work, thrives in ambiguity, and is able to lead their own projects into completion. Ideally, you are someone who has come from a fast paced, aerospace environment, having completed difficult projects while collaborating effectively with other key groups. On a weekly basis, you will be designing components using NX/TeamCenter, performing analysis using Nastran, ANSYS and/or hand calculations, and conducting operations in the test yard. You will brainstorm new ways to accommodate the speed and flexibility of our additive manufacturing methods. You will also use your strong organizational skills to properly document your work and provide your recommendations in technical discussions. About You: • 2+ years of experience in a full cycle design engineering role and a Bachelor's degree in related discipline, • Working knowledge of structural analysis and test (from hand calculations to advanced analysis), • Fundamental knowledge of structures strength, stability and fatigue failure mechanisms, • Experience with NX/TeamCenter, • Experience using Nastran and ANSYS, • Demonstrated record of timely project completion Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$108,000—$138,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job Description SUMMARY OF POSITION As an Electrical/Control System Designer, you will be responsible for the design of low voltage power distribution, PLC and Local Control Panels along with associated documentation. You will be responsible for designing and developing complex electrical systems, ensuring compliance with various codes and standards, and providing support for the team. POSITION RESPONSIBILITIES • Design and develop electrical systems for various projects and equipment including, PLC Panels, Motor Control Panels & Local Control panels (using relay logic), Loop and Interconnect Drawings, Motor Control Centers, Switchgear and Panelboards., • Review public and private project contract documents including plans, specifications, and estimates., • Perform detailed calculations to ensure adherence to standards and specifications., • Use computer-assisted engineering and design software (AutoCAD Electrical, MS Office, Bluebeam/Acrobat) to prepare engineering and design documents., • Inspect completed equipment to assure fabrication to plans and appropriate standards (NEC/NFPA/UL/etc.)., • Prepare specifications for purchase of electrical equipment and materials., • Collaborate with multi-disciplinary project teams to ensure project completion in a timely and efficient manner., • Develop electrical designs, drawings, and specifications for new construction and retrofit projects., • Perform load calculations, equipment selection, and system layout for power, lighting, and control systems., • Ensure designs comply with relevant codes (NEC, IEC, NFPA) and client standards., • Coordinate with other disciplines (mechanical, structural, civil) to integrate electrical systems., • Support the preparation of technical reports, cost estimates, and project documentation., • Review shop drawings, submittals, and respond to RFIs during construction., • Provide technical support to junior designers and drafters., • Proficiency in AutoCAD, Revit, and/or other electrical design tools., • Strong understanding of electrical codes and standards., • EIT certification preferred; PE license is a plus., • Excellent communication and organizational skills. QUALIFICATIONS • Experience with control panel design., • An understanding of contract documents (P&IDs, Single Line drawings, Specifications, etc.), • Proficiency in AutoCAD Electrical, MS Office, and Bluebeam/Adobe Acrobat., • Familiarity with Electrical Design, Power Systems, NFPA, NEC, UL508A, amperage, KW, power factor, 600V, 480V., • Proficiency in AutoCAD, Revit, and/or other electrical design tools., • Strong understanding of electrical codes and standards., • EIT certification preferred; PE license is a plus., • Excellent communication and organizational skills., • A strong understanding of electrical processes and systems., • Excellent communication skills, written and verbal., • Strong problem-solving and decision-making skills., • Ability to work in a team environment., • Must be detail-oriented and able to manage multiple projects simultaneously EDUCATION, CERTIFICATION, SKILLS AND/OR ABILITIES REQUIRED • Experience:3–6 years of relevant electrical design experience., • General working environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is primarily conducted indoors with varying environmental conditions such as fluorescent lighting and air conditioning. Occasional visits to SOFFA manufacturing locations.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Integrated Performance team owns the holistic view of how Terran R comes together, ensuring that every system on the vehicle and ground is capable of achieving our ambitious objectives. The team works across the full launch system, from trajectory design and aerodynamics to reliability analysis and beyond, with direct influence on all parts of the product lifecycle, from conceptual design to post-flight data review. Beyond analysis, team members engage hands-on with hardware and operations, with the mission and authority to drive meaningful programmatic change. With a unique organizational structure, the integrated performance team spans multiple technical domains and embeds directly with partner teams to solve the hardest multi-disciplinary problems. The team operates with a rare scale: large enough to support complex development, yet small enough that individual contributors have meaningful impact. The Integrated Analysis group is responsible for accelerating Relativity's hardware engineering via advanced analysis and cutting-edge tools. The team works on a variety of complex structures analyses across all of our hardware teams, and develops tools and methods to unlock deeper insight in less time - to reduce weight, improve robustness, and deliver more flight-ready hardware to the launch pad. About the Role: • Drive architecture, sizing, and development of structures like tanks, thrust structures, mechanisms, trays, lines, and other components in collaboration with peer technical teams, • Build, execute, and validate structures analyses at the component, system, and vehicle level, including relevant tool development and automation. Develop novel structural analysis techniques for reusable, 3D-printed launch vehicles, • Direct design and development engineers in the successful application of structural mechanics and analysis principles to achieve system and component requirements, • Undergraduate degree in engineering or a related discipline, • 2+ years experience in an analysis role, • Working knowledge of structural analysis and test (from hand calculations to advanced numerical analysis e.g., nonlinear buckling or explicit dynamics), • Fundamental knowledge of metallic structure behavior and failure modes like strength, stability, and fatigue, • Proficiency in a commercial aerospace finite element package (e.g., Nastran, Abaqus) and a relevant pre/post-processor like Femap, • Graduate degree in engineering or a related discipline, • 5+ years experience in an analysis role, • Experience across 1 or more full product lifecycles of an integrated vehicle, • Graduate education in structural mechanics, computer science, or numerical methods Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$108,000—$138,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job DescriptionCompany Description At KPFF Consulting Engineers, we are more than just an engineering design firm. For over 60 years, we have dedicated ourselves to innovative, sustainable engineering that shapes the built environment and tackles complex infrastructure challenges. Our team culture emphasizes balance, growth, and well-being, supporting each member’s professional journey with flexibility, generous benefits, and a collaborative approach to work-life integration. With over 1,400 professionals across 27 offices nationwide, KPFF’s decentralized structure allows each office the flexibility to pursue projects aligned with their regional strengths. Learn more at . Job Description KPFF is seeking summer interns interested in experiencing the daily life of a Structural Engineer. We provide you with a summer packed with training programs to prepare you to be successful, activities to help you connect with our team, and real-world projects to apply your skills. At KPFF, 2 out of 3 of our interns return as full-time employees or return for another internship in the next year. Who We Are Looking For Students curious about Structural Engineering and wanting to understand the daily life of a Structural Engineer. We enjoy working with interns who are eager to contribute to their teams and who are interested in making connections and getting to know the people they work with. For this role you will need to have completed a bachelor’s degree in Civil Engineering (with an emphasis in Structures or Architectural Engineering, prior to the start of the internship. You are interested in Structural Engineering and would like the opportunity to be exposed to a wide range of projects and conditions. You enjoy working with and learning from others to create work that you are proud of. You take the initiative to solve challenging problems and are a proactive team member. What You Will Be Doing As a Structural Engineering Intern, you will gain hands-on experience in structural design, working closely with our experienced engineers on real-world projects. You will have the opportunity to apply your academic knowledge, develop your skills, meet other students who are in the same field, and contribute to meaningful work. You will assist in the preparation of calculations and construction documents on active jobs under the guidance of project leaders. You will have the opportunity to participate in project meetings and site visits. Position Overview This is a non-exempt, temporary position. All overtime hours are paid at a time-and-a-half hourly rate. Salary The pay rate for this position is $31.50 an hour for interns awarded a bachelor's degree prior to the start of the internship. Monthly Way We Work stipend to assist with remote work and transit expenses. Qualifications Minimum Qualifications You must possess a completed bachelor’s degree in Civil Engineering (with an emphasis in Structures or Architectural Engineering) prior to the start of the internship. Transcripts must show completed courses in: • Structural Analysis, • Mechanics of Materials, • Concrete, • Steel or Wood Design Additional Information Work Schedule 40-hour work schedule, Monday through Friday Interns work Monday-Thursday in our Downtown Los Angeles office. Interns have the option to work remotely on Fridays from home. Application Process If you are interested in this position, please apply on our careers page. Resumes sent elsewhere will not be considered. Please provide transcripts for all undergraduate and graduate courses as well as a cover letter. In your cover letter (PDF) please respond to the following prompts: • Why have you decided to pursue Structural Engineering?, • Duties are performed in a normal office environment while sitting at a desk or computer table., • Duties require the ability to actively engage with a computer for several hours per day., • May occasionally need to lift items up to 15 lbs., • Duties require in-person attendance, Monday through Friday, during our business hours of 8 AM to 5 PM at our office in Downtown Los Angeles for the training period. Our employees are valued and empowered, collaborative and team oriented, innovative in their approach and passionate about their work. They are reliable, trustworthy and open with a high level of integrity. They value diversity, are inclusive and are committed to critically thinking through problems and finding solutions. Our Offices Our Greater Los Angeles Structural office has two locations at the Bloc in Downtown Los Angeles and at the Irvine Towers in Irvine. A warm and friendly environment, we are dedicated to growing with our employees and allowing people to pursue their passions. KPFF Consulting Engineers participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. KPFF Consulting Engineers is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, creed, ethnicity, national origin, religion, marital status, sex/gender (including sexual orientation or gender identity), pregnancy, veteran status, citizenship status, physical or mental disability, or any other protected basis.

Job Description Career Opportunity – Manufacturing Engineer / Planner Acromil LLC - City of Industry Our Company Using state-of-the-art technology, Acromil LLC, has been a primary supplier in the Aerospace and Defense industry for complex structural components since 1959. Acromil pursued a vision to provide the highest quality product, competitive price and on time delivery within a culture of integrity and pride. Our success in achieving this vision is derived from our excellence in Manufacturing, Engineering/Programming and Quality Control. Our Opportunity The selected individual will perform the specific duties below: • Prepares original manufacturing process instruction sheets and outlines. Plans manufacturing phases and process steps necessary to fabricate including repair, rework and revision of Company products in accordance with pertinent specifications. Prepares and completes planning documents; assuring the most economical and efficient production of our products., • Develops visual aid work instructions and lean processes. Studies existing production methods for improvement opportunities and communicates findings with senior management team., • Trouble shoot manufacturing processes. Act as Liaison between Engineering/NC Programming/Manufacturing/Program Management., • Analyzes engineering design releases, customer process and quality specifications and related documentation; develops traveler and process sheet specifying operations sequences, raw stock and part required, tooling and tolerances to be held, set-up and run times, inspection points and other manufacturing features or characteristics requiring control. Incorporates engineering change orders and planning changes; revises planning documents. Prepares rework planning., • Prepares planning drafts and checks typed documents for accuracy and completeness; routes planning and supplemental documents., • Develop costing for new projects, from simple to complex assemblies, including multi-level bill of materials., • Compiles all required information to cost components and assemblies including: bills of material, routings and processes, raw material specifications, outside vendor services, material costs, production rates, asset utilization, tooling, fixture and packaging requirements., • SPC Coordinator., • Tooling Coordinator., • FOD Coordinator. Job Requirements Qualified individuals will have a minimum of five (5) years planning experience preferably in manufacturing with metal fabrication and machining background. OTHER SKILLS and ABILITIES: • Proficient in interpreting complex engineering drawings., • Efficient math skills., • Knowledge of materials used in aerospace i.e., stainless, nickel, titanium, aluminum, etc., • Knowledge of aerospace manufacturing process i.e. assembly, welding, machining, forming, inspection, cleaning and heat-treating., • Knowledge of ERP/MRP process applications, excel spreadsheets and Auto CAD., • Knowledge of CATIA (computer-aided three-dimensional interactive application)., • Strong computer skills and proficiency with Microsoft Office, especially Excel. Person must be an United States (US) Person as defined by ITAR Regulations - A United States (US) Person is a citizen of the United States, a lawful permanent resident alien of the US, (a "Green Card" holder), a refugee or someone in the USA as a protected political asylee or under amnesty. Benefits We offer Medical, Dental, Vision, Life Insurance and a 401(k) plan with Employer’s match, safety incentives and an employee referral bonus program. We also provide paid holidays, vacation and sick days. We are proud to be an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation.

Job DescriptionCompany Description At KPFF Consulting Engineers, we are more than just an engineering design firm. For over 60 years, we have dedicated ourselves to innovative, sustainable engineering that shapes the built environment and tackles complex infrastructure challenges. Our team culture emphasizes balance, growth, and well-being, supporting each member’s professional journey with flexibility, generous benefits, and a collaborative approach to work-life integration. With over 1,400 professionals across 27 offices nationwide, KPFF’s decentralized structure allows each office the flexibility to pursue projects aligned with their regional strengths. Learn more at . Job Description KPFF is looking for full-time structural engineering professionals for our Greater Los Angeles Structural office. We are seeking a highly motivated person with a passion for engineering excellence and eager to develop design and project management skills. This position will provide the opportunity to work for a variety of public and private clients on all types of projects through planning, design, permitting and construction. Our work focuses on structural design on infrastructure projects, including bridges, waterfront infrastructure, and other horizontal construction projects on the West Coast region. Our engineers work in a team structure that allows frequent collaboration and connection to all layers of our organization, from interns to Principals. We foster a culture where our engineers collaborate outside of the project work through social events, educational programs and technical training. We provide numerous opportunities for professional growth, learning, and teaching. Individual accomplishments and successful projects determine your future at KPFF, and your dedication and talent will drive your career here. This is an Exempt employment position, all overtime hours are paid at an hourly rate. Benefits KPFF is proud to provide our employees with benefits options that fit their unique lives, including: • Medical insurance options to choose from, VSP Vision Insurance, and Delta Dental Insurance, • 7 paid holidays, and 2 floating holidays for you to use each year, • 2 weeks vacation annually, with competitive seniority based accruals, • 2 weeks of personal and sick time to care for yourself and your family members, • KPFF will contribute 3% of your base salary to your 401(k) regardless of your contribution, • KPFF Paid Family Leave: Provides 60% of your base salary while on an approved leave for up to 6 weeks in a rolling 12-month period, • 40-hour work schedule, Monday through Friday, • Flexible scheduling - core hours of collaboration are 9:30-3:30 PM, • Those who receive their PE or SE at KPFF will receive a bonus in addition to testing fee reimbursement, • Monthly Cell Phone stipend, • Monthly Way We Work stipend for remote work and transit expenses, • Semi-annual Bonuses Pay Range is $85,000-$95,000 salary depending on education, experience, and licensure. Qualifications Qualifications Include • B.S. in Civil Engineering (with a structural emphasis), • M.S in Civil Engineering preferred (with a structural emphasis), • EIT is required, • Concrete, steel, and timber coursework and /or design experience, • Pre-stressed concrete and seismic coursework and/or design experience, • Familiarity with non-linear analysis, • Ability to work dynamically with clients and project team members, • At least two years of full-time experience as a structural DE or equivalent is required, • If you are interested in this position, please apply on our careers page. Resumes submitted elsewhere will not be considered. Additional Information Application Process If you are interested in this position, please apply on our careers page. Resumes sent elsewhere will not be considered. Transcripts must be provided prior to an interview. Cover letter is preferable and should address the following: • Describe a time when you were assigned a project or task that turned out to be really difficult. How did you work through it, and what was the outcome?, • Bridges, • Wharves and Piers, • Duties are performed in a normal office environment while sitting at a desk or computer table., • Duties require the ability to actively engage with a computer for several hours per day., • May occasionally need to lift items up to 15 lbs., • Duties require in-person attendance, Monday through Friday, during our business hours of 8 AM to 5 PM at our office in Downtown Los Angeles for the training period. Our employees are valued and empowered, collaborative and team oriented, innovative in their approach and passionate about their work. They are reliable, trustworthy and open with a high level of integrity. They value diversity, are inclusive and are committed to critically thinking through problems and finding solutions. Our Offices Our Greater Los Angeles Structural office has two locations at the Bloc in Downtown Los Angeles and at the Irvine Towers in Irvine. A warm and friendly environment, we are dedicated to growing with our employees and allowing people to pursue their passions. KPFF Consulting Engineers participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. KPFF Consulting Engineers is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, creed, ethnicity, national origin, religion, marital status, sex/gender (including sexual orientation or gender identity), pregnancy, veteran status, citizenship status, physical or mental disability, or any other protected basis.

Job Description Risha Engineering Group, Inc. has openings for an Associate Civil/Structural Engineer position for new construction and rehabilitation projects for office, retail, educational, residential, healthcare, hospitality, and industrial buildings. Projects are located across the Western United States. This is a work from office position in our Burbank location. Associate Duties include: With supervision from senior staff, prepare complete calculations within allotted hours and budget for wood, steel, and concrete buildings. Design and detail connections for all materials. Supervise preparation of construction documents by CAD personnel. Ensure that progress and plan check submittal packages are complete. Prepare well written technical reports. Demonstrate thorough understanding of building and material codes. Some knowledge of performance based advanced analytical techniques and ASCE 41 is a plus. Must have 3 – 5 years’ experience. Bachelor of Science in Civil Engineering (BSCE) required. California PE License or ability to obtain in a 2 year time frame, SE License is a plus. Additional Information: Excellence in engineering and a team centered attitude are a must. Exceptional compensation package including: • Competitive salary, DOQE, • Health/dental insurance with premiums paid by company, • 401k with matching contribution, • Paid vacation/sick leave, • Paid trainingCompany DescriptionRisha Engineering Group, Inc. is a premiere regional structural and civil engineering firm with a comprehensive portfolio of iconic projects!Risha Engineering Group, Inc. is a premiere regional structural and civil engineering firm with a comprehensive portfolio of iconic projects!

Job DescriptionDescriptionAs an Avionics Mechanical Engineering Intern your core responsibility will be to design, manufacture, and test the mechanical elements of spacecraft avionics. You will work closely with electrical, propulsion, GNC, and vehicle structures engineers to execute on architectures and products that maximize overall vehicle performance. This internship may begin in September 2025 or later and will last approximately 12-14 weeks. Responsibilities • Evaluate requirements, develop mechanical design, generate drawings for various avionics systems and devices, • Conduct design reviews to gain cross-disciplinary consensus on design validity, • Design products for ease of manufacture, and work with suppliers to get parts fabricated, • Perform hand calculations and FEA to predict system performance, • Analyze structural modes, thermal performance, and other critical aspects of avionics devices, • Currently enrolled in a bachelor’s or master’s program in Electrical Engineering, Mechanical Engineering, Aerospace Engineering, or related field, • Experience designing mechanical components in CAD software, • Understanding of static loads and methods of heat transfer, • Understanding of fabrication methods, such as CNC milling and 3D printing, • Familiarity working hands-on with basic mechanical tools, • Ability to work in a fast-paced environment and learn new skills, • Experience using NX and Ansys Mechanical, • Understanding of EMI shielding design, • Understanding of the basics of vibrations and associated analysis, • Experience working on a team with a mix of mechanical and electrical engineers, • Willing and able to work on-site in Redondo Beach, CA for the duration of the internship Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionSalary: $150,000 - $168,000 ABOUT CITADEL CPM Citadel CPM is a California corporation, headquartered in Pasadena with offices in Fullerton, Long Beach, Riverside, and Sacramento, as well as Phoenix, Arizona. Citadel was established in 2006 to provide professional construction project management services to Federal, State, and municipal agencies in the justice, corrections, education, healthcare, infrastructure, and military market sectors. ABOUT THE TEAM Our team is dedicated to making our clients' vision a reality while delivering projects on budget, schedule, scope, and quality expectations.Our team iscommitted to resolving issues in a professional andcollaborative manner withintegrity always foremost in mind. We are proud to know that Citadel CPM is regarded as a team of reputable professionals that clients seek to help them manage their construction projects, and thatindustry professionals aspire to join. Citadel's reputation has been built on a set of three principles that form our core values: Integrity, Professionalism, and Responsiveness. ABOUT THE ROLE Citadel CPM is in search of a highly experienced Project Scheduler to join our team. In this role, you will be managing the program schedule for educational facilities project on Primavera (P6) within a team. You will monitor the Critical Path and Earned value throughout the projects. ABOUT YOU You are a professional with minimum of 5 years of full time paid professional experience in Construction Scheduling for an Owner or General Contractor, preferably in an educational facility or public works projects. Scheduling proficiency in Primavera latest version and MS Office Suite program for construction projects. You have maintained construction schedules to keep the project on time for the construction staff to stay on schedule. BASIC QUALIFICATIONS • Develops and maintains program schedules identifying relationships, logic, milestones, and constraints for construction projects of various types., • Independently interprets and reads detailed construction drawings (Architectural, Structural, Mechanical, Electrical, Plumbing, Civil, etc.) and develops a clear understanding of work scope., • Reviews Contractors Baseline schedule submissions and verifies that all work scope is identified properly and logically sequenced correctly; provides written detailed schedule review comments., • Performs QA/QC on contractor schedule submittals for conformance with the contract, reviews critical path, cost loading, resource loading of man-hours, schedule content, recovery schedules, use of logic relationships, lead/lags, constraints and milestones., • Performs schedule Time Impact Analysis for any change orders that affect the construction schedule; conducts schedule negotiations with the OAR and the contractor for any delay time settlements., • Reads drawings to determine if work is in or out of scope and understands terms and conditions of the contract to determine if any compensable or non-compensable time extensions have merit., • Performs Critical Path analysis and Earned Value analysis., • Walks the construction sites as needed and checks the contractors weekly/monthly schedule progress; provides reports to the project OAR and upper management., • Effectively communicates with the Contractor regarding all schedule/progress related matters and concerns in the weekly status meetings and all other schedule related meetings., • Performs Program Schedule QA/QC reviews on a regular basis., • Performs status updates for Program Schedules/Master Schedules on a bi-monthly basis., • Ensures proper use of Program-level standard codes, layouts and reports necessary to ensure data integrity., • Serves as a liaison between project teams, department leadership and the Program & Project Controls department., • Prepares reports as needed and directed by Management. REQUIRED QUALIFICATIONS • Excellent written and verbal communication skills., • Superior organizational and planning skills., • Ability to build efficient working relationships with project teams and department staff., • Understanding of theories, principles and practices of cost engineering, scheduling, and schedule forensics. EDUCATION REQUIREMENTS You must have one of the following: • Graduation from a recognized college or university with a bachelors degree in any course, but with additional two (2) years of experience in Construction Scheduling to compensate for the required education. Citadel is committed to a diverse and inclusive workplace environment. Citadel is an equal opportunity employer and does not discriminate based on race, natural origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. To request an interview accommodation please send an email to In compliance with the local law, we are disclosing compensation, or a range therefore for location where legally required. Actual salaries will vary based on several factors, including but not limited to external market data, internal equity, location, licenses, skill set, experience and/or performance. Base pay is only one component of Citadels total compensation packages for employees. Pay range for the Project Scheduler is $150,000 - $168,000 salary per year. Featured Benefits Medical Insurance Vision Insurance Dental Insurance 401K Life and Long-Term Disability Insurances Paid Time Off (PTO) for personal time, sick days, and holidays Professional Development Reimbursement

Job DescriptionCompany Description The Vertex Companies, LLC (VERTEX) is a global $150M professional services firm that offers integrated forensic consulting, expert witness services, construction project advisory, and compliance and regulatory consulting to a myriad of markets and industries. Our brand purpose is to better outcomes for our clients, colleagues, and communities. Join us if you are looking for a career that offers you a chance to love what you do, continuously learn, and take pride in your work. Our Forensic team is a collaborative group of architects, engineers, fire investigators, and building consultants who provide expert analysis for clients, including insurance firms, law firms, developers, and property owners. We work on complex projects involving property damage, construction defects, and design errors, with a strong pipeline of challenging assignments across industries. Why join our Forensic team? • Growing department with approachable leadership and opportunities for advancement, • Opportunities for direct client and team interaction, • Exposure to a wide variety of projects and industries to enhance your portfolio, • Strong project pipeline and a healthy backlog of workJob Description Our Forensic Architect team provides expert consulting to a wide range of claims that include building envelope investigation, architect standard of care analysis, premises liability, building code analysis, analysis of code and specifications, infrared thermography survey, and fire-resistant construction analysis. These activities will generally be performed for insurance property claims, construction defect litigation matters, and property condition assessments. Forensic Architects work alongside structural engineers and enjoy variety in their work, a combination of field and office work, and feel pride in helping to resolve our client's issues. What you will be doing: • Conduct forensic field inspections into the cause and origin of incidents related to residential and commercial property damage claims and/or construction or design defect claims, • Research compliance with building codes and review construction and project plan documents, • Develop expert investigative reports with detailed findings and plans for remediation for senior management review and client presentation, • Develop detailed plans and estimates for remediation of loss: scope, schedule, budget, • Participate in business development activities and presentations, including regular contact with existing and prospective clients in the region, • Support other departments as neededQualifications, • BS degree in Architecture, Engineering, or Building Services, • Registered Architect (RA) in California, • 7+ years of professional experience in the design, inspection, and construction of residential and commercial structures required, prior forensics experience required., • Strong knowledge of the residential (IRC), commercial (IBC) and existing (IEBC) I-codes, • Proficiency with office software applications (MS Office: Microsoft Word, Excel, etc.), • Prior experience with property damage claim investigations and in supporting litigation matters such as depositions, trial testimony, or mediation is preferred, • Strong customer service orientation, • Excellent verbal and written (technical writing) communication skills in English, • Ability to carry and operate a 24-foot extension ladder unassisted, walk on elevated and slope surfaces and work in confined spaces, • Travel to client sites is required for this role Additional Information The annualized base salary range for this role is $150,000 to $190,000 per year. VERTEX offers a solid total compensation package including base salary and discretionary bonus plan. We also offer a robust benefits package including, healthcare (with multiple plan options) and dental; Company-paid Life Insurance, Short Term Disability, and Long-Term Disability. We offer a 401k plan with immediate match and vesting, Flex Spending Account, Employee Assistance Program, and other perks. We provide a generous paid time off plan for eligible employees including 15 days of vacation, 64 hours of sick time, and 9.5 paid holidays (prorated for eligible part-time employees). Our “Lifetime of Learning” program also offers tuition reimbursement and additional support for pursuing advanced education, to help employees grow their skills and careers. VERTEX is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. If you require assistance to complete any part of the application process, please contact our Recruiting team at . NOTICE TO THIRD PARTY AGENCIES: Please note that VERTEX does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, VERTEX will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, VERTEX explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of VERTEX.

Job DescriptionSummary Our client is currently seeking individuals for a full-time position as aMechanical Project Engineerlocated in the San Diego, CA area. Backed by the strength and stability that comes with almost a century of customer care and ownership, our client adheres to the highest safety standards for its employees and clients. They offer industry-leading building information modeling (BIM) capabilities, design/build services, sustainable solutions, commercial HVAC services, and complex mechanical and industrial system installations. Duties and Responsibilities Project Estimating (Take-Off & Analysis)Project Scheduling (Manpower scheduling)Manage RFIs (Requests for Information)Prepare Submittal PackagesManage Flow of Contractor provided submittal dataAssist in data population of formsPrepare Project Progress BillingsAssist in Technical Analysis, Trouble shooting, and problem solving of HVAC Air Equipment, HVAC Piping Equipment Systems, HVAC & Plumbing Equipment Skills and Experience Basic working knowledge HVAC & Plumbing Design & System OperationBasic working knowledge of Commercial & Industrial construction sequencesBasic working knowledge of construction estimatingBasic working knowledge of testing procedures for HVAC systems.Basic working knowledge of ASHRAE data & guidelinesAverage proficiency with MS Project scheduling programAverage proficiency with MS Access or other database programsAbove average proficiency with MS Excel & WordAbove average proficiency with InternetAbove average verbal & writing skillsAbove average organizational skills in handling & archiving technical data Recommended that the candidate have bachelors degree in Mechanical Engineering, Construction Management, Other Engineering Disciplines (Civil, Industrial, or Structural), and/or 5 years industry experience as a Construction Project Engineer. Candidate should be able to demonstrate experience with project administration, project scheduling, productivity analysis, project cost control accounting, plus equipment & material procurement. Company offers competitive benefits including 401-K, health, dental, and life and long-term disability. Includes, holiday, sick and vacation pay. We offer our employees a competitive salary and competitive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/DisabledEmployment Type: Full time Location: Beverly Hills

Job Description Sr. Project Engineer – Vehicle Accessories Exteriors ABOUT SLATE At Slate, we're building safe, reliable vehicles that people can afford, personalize and love—and doing it here in the USA as part of our commitment to reindustrialization. The spirit of DIY and customization runs throughout every element of a Slate, because people should have control over how their trucks look, feel, and represent them. | WHO WE ARE LOOKING FOR We design utility accessories built for personalization and real-life adventure—engineered to perform on the trail, in the driveway, and everywhere in between. As Senior Project Engineer – Utility Accessories & Hard Goods, you'll lead the development of exterior and structural products such as roof racks, cargo mounts, modular utility systems, and body protection gear. You'll take responsibility for technical execution across internal teams and global suppliers, ensuring performance, durability, and compliance every step of the way. | WHAT YOU GET TO DO • Lead full-lifecycle engineering of hard-goods accessories: racks, carriers, panels, mounts, and trail systems, • Create and manage CAD models and detailed 2D drawings in CATIA; release via Windchill, • Collaborate with suppliers for material selection, DFM/DFA, prototyping, testing, and production ramp, • Ensure structural integration with vehicle mounting points and adherence to OE crash and load path criteria, • Develop and execute DVP&Rs for durability, fatigue, corrosion, IP rating, and mechanical performance, • Ensure compliance with relevant regulations and standards (FMVSS, SAE, ISO, etc.), • Lead field validation, prototype build support, and first-off part evaluations, • Track BOM health, mass, cost targets, and engineering status through all program gates, • Partner closely with industrial design, product management, and operations to align performance and brand standards, • Present technical risks, trade-offs, and decisions to senior leadership and cross-functional teams | WHAT YOU BRING TO THE TEAM • BS in Mechanical Engineering or related field; MS or MBA a plus, • 6–10+ years in ruggedized hardware, vehicle accessories, or structural product development, • Mastery of CATIA (V5 or V6); Windchill PLM experience strongly preferred, • Experience designing and releasing structural or utility components across metals, plastics, and composites, • Strong working knowledge of FMVSS, SAE, ISO, and similar compliance/regulatory frameworks, • Demonstrated ability to bring products from concept through production with Tier 1/2 suppliers, • Comfortable with iterative development, supplier travel, and hands-on prototype validation We're fueled by grit, determination, and attention to detail. Slate's start-up spirit of ingenuity and resourcefulness moves our business forward. Team Slate fosters a culture of excellence, innovation, and mutual respect, and is motivated by shared principles. • Safety First, • Delight Customers, • One Team, • Relentless Improvement, • Fast, Frugal and Scrappy, • Respectful Collaboration Long Beach, CA Base Salary Range – $119,000-$149,000.00 The stated pay scale reflects the range that Slate reasonably expects to pay for this position. The actual pay rate and pay grade for this position will be dependent on a variety of factors, including an applicant's years of experience, unique skills and abilities, education, alignment with similar internal candidates, marketplace factors, other requirements for the position, and employer business practices. In addition to base pay, Slate also offers short-term and long-term incentive programs – 401k match, annual bonus and company equity, based on eligibility, along with a robust offering of benefit and wellness plans, HSA / FSA. WE WANT TO WORK WITH PEOPLE THAT REFLECT THE COMMUNITIES IN WHICH WE OPERATE: • Slate is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, marital status, parental status, cultural background, organizational level, work styles, tenure and life experiences. Or for any other reason.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS™) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose We are seeking an experienced and driven Sr. Packaging Engineer to develop and oversee the logistics infrastructure across both companies. This role requires deep understanding of complex manufacturing supply chains, packaging design for both inbound/outbound transportation and lineside manufacturing presentation, and the flexibility to support both product development and scaled production environments. You will lead efforts to optimize packaging quoting and design for new program launches, support regulatory requirements, develop and implement lineside packaging requirements for production, manage third-party packaging providers, and enhance the overall agility and efficiency of our operations. You will work closely with teams across engineering, program managements, logistics, procurement, production, and finance to ensure packaging requirements align with fast-moving project timelines and long-term growth goals. The Role Transportation Packaging • Lead the design, development, quoting, and procurement of packaging solutions for outbound finished goods for both automotive and aerospace & defense programs., • Design lineside conveyance solutions to support both vehicle and printed part manufacturing., • Provide systematic support regarding sub inventory and locator naming conventions, labeling standards, and warehouse scan ability., • Serve as packaging SME (subject matter expert) on cross-functional teams with engineering, R&D, finance, compliance, and customer support., • Provide packaging related expertise for dangerous goods/regulatory topics., • Be the primary forecast and budget owner for all packaging related costs on the inbound direct and outbound indirect side. Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls, • Bachelor's degree in Packaging Engineering, Mechanical Engineering, Materials Science, Supply Chain, or related discipline., • Minimum 5 years of experience in packaging engineering, with a history of designing and implementing packaging solutions in the automotive or aerospace industries., • Demonstrated success in managing packaging programs in support of international logistics and global supply chains., • Expertise in CAD software (e.g. SolidWorks, Catia) for 3D modeling and packaging design, as well as simulation tools for structural analysis and optimization., • In-depth knowledge of packaging materials, including plastics, composites, foams, and corrugated cardboard, with a focus on sustainable and environmentally friendly options., • Strong understanding of packaging testing standards (e.g., ISTA, ASTM, ISO) and experience conducting physical and environmental testing to validate packaging performance., • Proficiency with ERP systems (e.g., Oracle, SAP), TMS tools, and advanced Excel/Google Sheets. Preferred Qualifications, • Experience in early-stage or scale-up manufacturing environments., • Familiarity with additive manufacturing logistics or just-in-sequence automotive production., • APICS, CLTD, Six Sigma, or Lean certifications a plus. Work Environment, • In-Office, • E04/Engineer: $106,000 - $145,750, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description A New Paradigm For Space Operations. Who We Are:Space Kinetic is a cleared, venture-backed startup focused on addressing urgent national security priorities. Our goal is to deliver a suite of asymmetric capabilities for space superiority and missile defense leveraging our proprietary electromechanical deployment system, which enables the rapid deployment of low-cost payloads through space without firing a thruster. Space Kinetic is currently assembling its TRL-5 prototype. Our goal is to leverage this platform to provide the United States with a new tool for securing the space domain & catalyzing the emerging space economy. What You'll Do: The Senior Design Engineer will design and build prototypes for the Space Kinetic's core technology to achieve our mission of a flight demo within the next 2 years in a fast-paced startup environment. You will work with the Space Kinetic manufacturing/engineering team to finalize the current prototype's CAD design. This entails refining the design with detailed tolerancing to cover all prototype development phases, completing mechanism design, providing 2D CAD drawings for manufacturing, and working with vendors to source components. Following this, you will be responsible for enhancing the prototype design to achieve significant weight reduction, targeting a 30% decrease and increasing its stiffness and rigidity. The next phase involves revising the mechanism designs to incorporate the latest advancements, minimizing the vibration within the system. Subsequently, the prototype will undergo a mechanical redesign to ensure it is suitable for manufacturing, with specific attention to tolerancing for plating processes. Additionally, you will adapt the prototype for future tests, such as air bearing, zero-g flights, and T-Vac chamber testing. This includes making structural adjustments to facilitate testing in various orientations and environments while ensuring the design meets rigorous safety standards. Finally, the role involves comprehensive ongoing analysis of test data to inform and drive necessary design changes throughout the project duration. We should move closer to a flight-ready prototype with each new design iteration. What It Takes: • Bachelor's Degree in Aerospace Engineering, Mechanical Engineering, or a related field with a minimum of 5 years of related experience. Advanced Degrees (Master's or Ph.D.) in similar disciplines are highly valued with correspondingly lower experience requirements., • Proven experience in aerospace or mechanical engineering, specifically skilled in mechanical design and space mechanisms., • Proficient in SolidWorks, GD&T, Space Mechanism Design, Test Structure Design, Build for Manufacturing (experience in collaborating with machinists and experience designing for manufacturing), expertise in Vibration, Rotary Component Design, and Space Structural Design., • Demonstrated Aerospace experience is essential., • Experience in executing experiments in a laboratory or R&D environment, skilled in data collection and adept at implementing design modifications based on experimental outcomes., • Ability to work with minimal direction or support and to learn quickly; strong analytical skills; creative and innovative thinking; detail-oriented; calm under pressure; commitment to follow-through; enthusiastic with a talent for motivating others; receptive to criticism and open to others' ideas; and effective in written communication., • Ability to build and maintain a network of talented individuals. Prioritizes organizational and planning skills. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder)., • Ability to maintain or obtain a Government Security Clearance. What We'd Love:, • Experience with space-grade components and ratings., • Adept in testing for in-space operations, • Passion for the commercial and government space industry., • Demonstrated experience in spacecraft or launch vehicle system development., • Experience in contributing technical expertise to the proposal writing process for the acquisition of grants and contracts. Where You'll Be:, • Competitive Base Salary + Equity-Based Compensation, • Highly Competitive PTO and Holiday Calendar, • Comprehensive Medical, Dental, and Vision Coverage, • Unique Performance-Based Bonus Structure, • Health and Wellness Stipend Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status. The annual base salary for this role is below. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range$100,000—$140,000 USD

Job DescriptionStructural Engineer, EIT Structural Engineer - Commercial, Residential Position Overview We are experiencing sustained growth and have openings for Structural Engineers who are eager to work on commercial and residential design projects. We offer excellent benefits, career guidance and advancement opportunities! Qualifications • Bachelor's degree in Civil or Structural Engineering., • EIT is required., • Experience in structural engineering, with a focus on seismic design preferred., • Proficient in AutoCAD and RISA software. Vacation/PTO Medical Dental Vision 401k Bonus Relocation Telecommute • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 06/24/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description The Tsui Group is seeking a candidate who is qualified and experienced in educational facility construction projects to serve as a Project Scheduler for a large educational client within Los Angeles County with the below duties: • Develops and maintains program schedules identifying relationships, logic, milestones, and constraints for construction projects of various types, • Independently interprets and reads detailed construction drawings (Architectural, Structural, Mechanical, Electrical, Plumbing, Civil, etc.) and develops a clear understanding of work scope, • Reviews Contractor’s Baseline schedule submissions and verifies that all work scope is identified properly and logically sequenced correctly; provides written detailed schedule review comments, • Performs QA/QC on contractor schedule submittals for conformance with the contract; reviews critical path, cost loading, resource loading of man-hours, schedule content, recovery schedules, use of logic relationships and lags, constraints and milestones, • Performs schedule Time Impact Analysis for any change orders that affect the construction schedule; conducts schedule negotiations with the OAR and the contractor for any delay time settlements, • Reads drawings to determine if work is in or out of scope, and understands terms and conditions of the contract to determine if any compensable or non-compensable time extensions have merit, • Performs Critical Path analysis and Earned Value analysis, • Walks the construction sites as needed and checks the contractor’s weekly/monthly schedule progress; provides reports to the project OAR and upper management., • Effectively communicates with the Contractor regarding all schedule/progress related matters and concerns in the weekly status meetings and all other schedule related meetings, • Performs Program Schedule QA/QC reviews on a regular basis, • Performs status updates for Program Schedules/Master Schedules on a bi-monthly basis, • Ensures proper use of Program-level standard codes, layouts and reports necessary to ensure data integrity, • Serves as a liaison between project teams, department leadership and the Program & Project Controls department, • Prepares reports as needed and directed by Management Requirements Required Experience: • Minimum 5 years full time paid professional experience in Construction Scheduling for an Owner or General Contractor, preferably in an educational facility or public works projects, • Excellent written and verbal communication skills, • Superior organizational and planning skills, • Ability to build efficient working relationships with project teams and department staff, • Understanding of theories, principles and practices of cost engineering, scheduling and schedule forensics, • Salary Range: $147,000-$152,000, • Medical, Vision, & Dental – 100% covered for the employee*, • Life and Disability Insurance, • 10.5 days of Vacation pay (Accrued), • 6 days of Sick pay (Available Immediately), • 13 days of Holiday pay, • 3% Employer Contribution 401k (After 1 year of service), • Monthly Stipend for Cell Phone, • Laptop for work purposes

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Employee discounts, • Health insurance, • Paid time off, • Training & development, • Develops and maintains program schedules identifying relationships, logic, milestones, and constraints for construction projects of various types, • Independently interprets and reads detailed construction drawings (Architectural, Structural, Mechanical, Electrical, Plumbing, Civil, etc.) and develops a clear understanding of work scope, • Reviews Contractors Baseline schedule submissions and verifies that all work scope is identified properly and logically sequenced correctly; provides written detailed schedule review comments, • Performs QA/QC on contractor schedule submittals for conformance with the contract; reviews critical path, cost loading, resource loading of man-hours, schedule content, recovery schedules, use of logic relationships and lags, constraints and milestones, • Performs schedule Time Impact Analysis for any change orders that affect the construction schedule; conducts schedule negotiations with the OAR and the contractor for any delay time settlements, • Reads drawings to determine if work is in or out of scope, and understands terms and conditions of the contract to determine if any compensable or non-compensable time extensions have merit, • Performs Critical Path analysis and Earned Value analysis, • Walks the construction sites as needed and checks the contractors weekly/monthly schedule progress; provides reports to the project OAR and upper management., • Effectively communicate with the Contractor regarding all schedule/progress related matters and concerns in the weekly status meetings and all other schedule related meetings, • Performs Program Schedule QA/QC reviews on a regular basis, • Performs status updates for Program Schedules/Master Schedules on a bi-monthly basis, • Ensures proper use of Program-level standard codes, layouts and reports necessary to ensure data integrity, • Serves as a liaison between project teams, department leadership and the Program & Project Controls department, • Minimum 5 years full-time paid professional experience in Construction Scheduling for an Owner or General Contractor, preferably in an educational facility or public works projects, • Proficiency in Primavera Latest Version and MS Office SuiteRequired Education:, • Graduation from a recognized college or university with a bachelors degree in any course, but with additional two (2) years of experience in Construction Scheduling to compensate for the required education.Preferred Education:, • Excellent written and verbal communication skills, • Superior organizational and planning skills, • Ability to build efficient working relationships with project teams and department staff, • Understanding of theories, principles and practices of cost engineering, scheduling and schedule forensics

Job Description We're hiring on behalf of a respected structural engineering firm based in Los Angeles. The team is looking for a mid-level engineer with 6-10 years of experience in building design and seismic analysis. This role offers the chance to work on a variety of commercial, residential, and institutional projects across Southern California. About the Role: You'll be responsible for structural design, analysis, and documentation from concept through construction. You'll collaborate closely with architects, contractors, and other consultants, and provide technical support during construction. The firm values engineers who are proactive, detail-oriented, and comfortable managing multiple projects. Key Responsibilities: • Perform structural analysis and design for buildings using tools like ETABS, SAP2000, and RISA, • Prepare drawings, specifications, and calculations for permit and construction, • Coordinate with internal teams and external partners, • Conduct site visits and respond to RFIs during construction, • BS or MS in Civil or Structural Engineering, • 6-10 years of experience in structural design, • Strong understanding of seismic design principles, • Proficiency in structural analysis software, • PE license in California preferred (or ability to obtain), • Excellent communication and organizational skillsCompany DescriptionLVI Associates exists to enable exceptional careers around the world; we connect exceptional talent, with exceptional opportunities. We believe that every professional should benefit from the advice of a trusted partner throughout their career. We provide that partnership to mid to senior level professionals within the Energy, Environmental & Infrastructure spaces through our network of micro-specialist consultants. Each team within LVI Associates focuses on a specialist area of Energy & Infrastructure. I specialise in sourcing and placing senior level candidates within the bridges and highway construction spaces. Make LVI Associates your career partner; ensure your career journey is exceptional.LVI Associates exists to enable exceptional careers around the world; we connect exceptional talent, with exceptional opportunities.\r\n\r\nWe believe that every professional should benefit from the advice of a trusted partner throughout their career.\r\n\r\nWe provide that partnership to mid to senior level professionals within the Energy, Environmental & Infrastructure spaces through our network of micro-specialist consultants.\r\n\r\nEach team within LVI Associates focuses on a specialist area of Energy & Infrastructure. I specialise in sourcing and placing senior level candidates within the bridges and highway construction spaces. \r\n\r\nMake LVI Associates your career partner; ensure your career journey is exceptional.

Job Description Hazen and Sawyer is seeking a candidate to provide electrical engineering and design for water and wastewater facility projects. • Qualified candidate should have basic knowledge in industrial power design, including medium and low voltage electrical power distribution, generator design, motor control, VFDs, lighting systems, equipment layout and related activities., • Candidate should have basic working knowledge of the NEC and related Codes., • Support the lead electrical engineer on multiple concurrent projects for water and wastewater facilities., • Prepare project specifications, • Perform conductor sizing, conduit sizing, protective device sizing, lighting, and other electrical calculations, • Coordinate with civil, process-mechanical, structural, architectural, HVAC, and instrumentation disciplines, • Perform site visits as needed, • Perform electrical design work in AutoCAD and/or Revit as required by the project, • Perform electrical power system studies in SKM and/or ETAP as required by the project, • Review shop drawings and respond to request for information, • Bachelor of Science in Electrical Engineering, • 3-5 years of relevant experience in heavy industrial Electrical Engineering and Design; Prior experience in water/wastewater industry is desirable, • Familiarity with industrial power distribution system, • Experience in Microsoft Office products, • Experience with SKM or ETAP power system software is desirable, • Experience with AutoCAD and/or Revit BIM software is desirable, • EIT certification is desirable We provide a comprehensive benefits package which includes employer paid life insurance, 401k employer contribution (after 1 year of service), performance bonus, comprehensive family medical, dental and vision insurance, paid time off, holidays, short-term and long-term disability, paid parental leave (after 1 year of service), employee assistance and wellness programs. Typical starting pay range for this position depends on skills, experience, education and geographical location.

Job DescriptionDescription: Introduction: Seabreeze Management Company is a full-service property management firm with a diverse management portfolio of over 150,000 residential and commercial properties. Based in Aliso Viejo, California, Seabreeze has offered an unrivaled client experience to commercial common-interest developments and homeowners’ associations for over 35 years. With offices throughout California, Nevada, Arizona, Idaho, and Washington Seabreeze and its family of companies has expanded its mission to be a trusted advisor and collaborative partner with developments to build thriving associations through superior service and integrity. At Seabreeze, people are at the heart of what we do. Our philosophy, “Passion when combined with commitment, makes anyone unstoppable.” is carried out by enthusiastic and customer-centric teams who serve the communities where we work and live. Summary: At Seabreeze Management Company, our motto is “People, Performance, Passion,” and we live that motto every day. By continually improving the service we offer our customers and providing our team with the resources they need, we have the power to create communities wherever we go. The Senior Building Engineer oversees the operation, maintenance, and repair of all building systems within the homeowners’ association (HOA) community. This role serves as the technical expert and lead for the building engineering team, ensuring safe, efficient, and compliant operation of mechanical, electrical, plumbing, and structural systems. The Senior Building Engineer partners with management, vendors, and residents to maintain property standards and enhance the community living experience. Essential Duties and Responsibilities: Operations & Maintenance • Supervise and perform preventive and corrective maintenance on HVAC, electrical, plumbing, elevator, fire/life safety, and other building systems., • Ensure equipment and systems operate safely, efficiently, and in compliance with all codes and regulations., • Lead, train, and mentor building engineers and maintenance staff., • Assign daily work orders, monitor completion, and ensure quality standards are met., • Coordinate with contractors and vendors for repairs, inspections, and capital improvement projects., • Review proposals, monitor project timelines, and ensure work meets HOA standards., • Respond to resident service requests and emergencies with professionalism and urgency., • Partner with property management on building-related issues, policy enforcement, and vendor performance., • High school diploma or equivalent required; technical or trade certification preferred., • 7+ years of progressive building engineering/maintenance experience, with at least 2 years in a supervisory or lead role., • Strong knowledge of mechanical, electrical, plumbing, and fire/life safety systems., • Familiarity with building automation systems (BAS), energy management, and sustainability practices preferred., • Ability to read and interpret blueprints, technical manuals, and regulatory requirements., • Strong communication, leadership, and problem-solving skills. High School Diploma or equivalent required. Language Skills: The individual must have strong written and verbal communication skills in order to communicate effectively with employees and clients at all levels of the organization. Availability: This position works on-site within the HOA community, both indoors and outdoors, and may require occasional overtime or on-call availability for emergencies. Physical Job Description Ability to lift up to 50 lbs, climb ladders, work on rooftops, and perform tasks in varying environmental conditions. Standing, walking, bending, and using tools for extended periods. Work Environment: The work environment is a typical office building. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Seabreeze is proud to be an Equal Opportunity Employer that celebrates the diversity of our team. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other legally protected status. For individuals with disabilities who would like to request an accommodation such as an ASL interpreter, please contact Vy Nguyen at (949) 334-8166.

Job Description Company Background: Founded in 1940 and headquartered in San Francisco, Degenkolb Engineers has more than eight decades of commitment to innovation, client service, and life-long learning. We deliver customized structural solutions in a variety of practice areas such as healthcare, education, science and technology, forensics, construction engineering, and federal buildings. We address every project need—whether meeting stringent codes, staying on budget, adhering to tight schedules, or creating landmark structural systems. Position Description: Degenkolb is again offering a summer internship program for future engineers! The goal of this program is to give students an understanding of how a structural engineering practice operates to complement academic training and to create a recruitment pipeline. We are fortunate to hire many former interns full-time after they complete their studies. Internships are available in our California offices (Los Angeles, Oakland, Sacramento, San Diego, and San Francisco), as well as Seattle, WA and our Midwest offices in Detroit and Grand Rapids, MI. Applicants may indicate interest in multiple locations on a single application. Ideal Candidate: A high-achieving Senior or Graduate student (undergraduate GPA 3.40 or above) with a passion for structural engineering. Interest in seismic analysis (non-Michigan offices) or steel design (Michigan) is strongly preferred. Compensation: The pay rate for this position, across the various offices, ranges between $28 - $37 per hour. This range is a good faith estimate pursuant to pay transparency laws. Actual pay rates will be based on various factors, including company geographic differentials, education level, and candidate qualifications. Culture: We offer a flexible hybrid work schedule and a fun, collaborative office environment. Our firm is filled with experts united by a passion for industry involvement, pride in company ownership, and respect for personal lives. You’ll benefit from professional development within a supportive, transparent team. Learn more: Scholarship Program: Interns hired into the program are eligible to apply for our competitive scholarships: • One scholarship for Cal Poly, San Luis Obispo students, • One for students at other California State University (CSU) campuses Scholarship Application Requirements (due March 1, 2026): Submit a targeted cover letter (two pages max) that addresses: • Career goals in the structural engineering profession, • Graduate school education goals, • Academic and leadership accomplishments We also participate in the NCSEA Diversity in Structural Engineering Scholarship Program Job Description: In structural engineering, academic coursework is just the foundation—hands-on experience makes the difference. As an intern, you will work on active project teams, gaining exposure to clients, design challenges, and firm culture. Minimum Requirements: • Must be a current full-time Civil Engineering student in your Senior year who is planning to continue directly into a Structural Engineering graduate program, OR a current Graduate student in Structural Engineering., • Demonstrated passion for structural and seismic analysis (or steel design in Michigan)., • Strong performance in upper division civil/structural engineering courses (Undergraduate GPA 3.40+)., • Active participation in extracurricular and/or leadership roles. Submit all of the following: • Resume--required, • Unofficial transcripts (undergraduate and graduate, as applicable) -- required for consideration, • Cover letter describing why you want to work with Degenkolb and how your background aligns with this position--strongly encouraged Degenkolb Engineers complies with Equal Opportunity Employer guidelines, meaning we do not discriminate in employment matters on the basis of race, color, religion, gender, national origin, age, military service eligibility, veteran status, sexual orientation, marital status, disability, or any other protected class. And we go beyond the laws - we are truly committed to increasing the diversity of our team and we value the different perspectives, skills, and experiences it brings to our firm.

Job DescriptionCompany Description KPFF Consulting Engineers provides structural and civil engineering services to architects, government agencies, developers, and contractors for projects with a wide range of functions. Established in 1960, KPFF has offices in Austin, Birmingham, Boise, Chicago, Des Moines, Eugene, Irvine, Lacey, Long Beach, Los Angeles, Louisville, Nashville, Newport Beach, New York City, Portland, Sacramento, Salt Lake City, San Diego, San Francisco, Seattle, Spokane, St. Louis, Tacoma, and Washington, DC.. KPFF's civil engineering staff accomplishes projects for site development, parks, and recreation facilities and the improvements to existing city streets, urban arterials, and highways. Scope of services may include site planning, environmental analysis, storm drainage studies, wetlands enhancement, permit coordination, and design of site grading, drainage, storm detention, utilities, access roads, parking facilities, and public street improvements. In addition to typical site development engineering, our civil group serves as a prime consultant to government clients for management and design of transportation, waterfront, site improvements, and major utility projects. Our engineers work in dynamic teams with open communication and strong support from senior-level mentors. These teams work directly with our clients on some of the most challenging projects in the region. We promote decision-making at the level closest to the issue in order to most efficiently and effectively serve our clients, and to promote professional growth for our staff. Job Description Civil Engineering Internship KPFF proudly takes part in students’ educational and professional development. We go beyond giving interns a glimpse into the job; we place them in the middle of it. We do this by incorporating them into teams that are ready to share their professional experience as they work on projects together. Job responsibilities vary by groups, and each intern walks away with a unique story to tell. Below is a list of representative entry-level engineer responsibilities that an Intern may be tasked to complete: • Assist in Project Design and Development: Contribute to civil engineering design projects, including site plans, grading, drainage, and utility designs, under the supervision of senior engineers., • Prepare Engineering Calculations and Documentation: Create calculations, drawings, and specifications using AutoCAD and Civil 3D; support technical reports and construction documents., • Conduct Site Visits and Field Investigations: Collect data, monitor project progress, and ensure compliance with design standards and safety protocols., • Support Project Coordination and Scheduling: Help maintain project schedules and documentation, and assist with permits and regulatory compliance., • Collaborate with Cross-Functional Teams: Participate in project meetings, work with contractors and vendors, and contribute to sustainable design and environmental compliance efforts., • Research and Stay Updated on Industry Standards: Engage in research to support innovative engineering solutions and uphold best practices in civil engineering. We are passionate about developing great engineers. Join us and be part of a team that works on exciting projects with exceptional clients! Qualifications • Excellent written and verbal communication skills., • Ability to visit job sites to inspect existing conditions and document potential scope of work, • Ability to sit and/or stand for prolonged periods of time at a desk working on a computer and viewing a screen, • Ability to learn and apply established engineering principles to solve problems and/or overcome obstacles using sound judgment, independent decision making, and prolonged focus Additional Information Why KPFF? Mentorship & Development: Through KPFF’s Forefront Education Program, you’ll receive unparalleled mentorship from seasoned professionals, empowering you to excel in your career from day one. Thrive in a setting that values your development and independence, where your ideas are welcomed, and your contributions make a real impact. Relationship Building: At our core, we focus on forging meaningful connections. By prioritizing trust and stability, we create lasting relationships with our partners and clients that stand the test of time. Supportive Environment: We cultivate growth in all aspects of your life in a supportive environment that values your well-being. From promoting a healthy lifestyle to organizing social activities, we strive to create a balanced and fulfilling workplace. Compensation The base salary for this role is competitive and will be determined based on the candidate's experience, education, and skills. The expected Salary for this position is $28.50. Additionally, we offer performance-based bonuses to recognize and reward outstanding contributions in each Reporting Center. During the interview process, we'll provide detailed information and address any questions you may have about the overall compensation package and benefits. KPFF Consulting Engineers is an Equal Opportunity Employer. KPFF Consulting Engineers participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. KPFF Consulting Engineers is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, creed, ethnicity, national origin, religion, marital status, sex/gender (including sexual orientation or gender identity), pregnancy, veteran status, citizenship status, physical or mental disability, or any other protected basis.

Job DescriptionCompany Description At KPFF Consulting Engineers, we are more than just an engineering design firm. For over 60 years, we have dedicated ourselves to innovative, sustainable engineering that shapes the built environment and tackles complex infrastructure challenges. Our team culture emphasizes balance, growth, and well-being, supporting each member’s professional journey with flexibility, generous benefits, and a collaborative approach to work-life integration. With over 1,400 professionals across 27 offices nationwide, KPFF’s decentralized structure allows each office the flexibility to pursue projects aligned with their regional strengths. Learn more at . Job Description KPFF provides civil and structural engineering services to architects, government agencies, developers, contractors, and institutional clients. Our Greater Los Angeles Structural office has two locations - Downtown Los Angeles and one in Irvine Towers. A professional and friendly environment, we are dedicated to growing with our employees and allowing people to pursue their passions. Benefits • 7 paid holidays, and 2 floating holidays for you to use each year., • 2 weeks of vacation annually, with competitive seniority-based accruals., • 2 weeks of personal and sick time to care for yourself and your family members., • KPFF will contribute 3% of your base salary to your 401 (k) regardless of your contribution., • KPFF Paid Family Leave: Provides 60% of your base salary while on an approved leave for up to 6 weeks in a rolling 12-month period., • 40-hour work schedule, Monday through Friday., • Medical insurance options to choose from, VSP Vision Insurance, and Delta Dental Insurance., • Semi-annual Bonuses., • Opportunities for educational events, relationship building, and fun! The pay range for this position is $36.00 - $38.50 per hour, depending on experience. Responsibilities • The Project Coordinator is part of an administrative team reporting to the Office Manager., • A Project Coordinator will perform tasks alongside other members of the administrative team in order to serve the business needs of the office., • Serve as the primary point of contact for office-related matters and be the go-to person for office knowledge., • Manage project documents for multiple projects, including creation and editing documents, printing, shipping, etc., • Organize and log Construction Administration documents., • Assist Project Managers with management planning, coordination, and organization tasks., • Coordinates and assists with presenter needs for both in person and virtual events., • Ensures cleanliness of all office spaces and maintains stock and functionality of office kitchen equipment., • Assist in preparing projects for closure including ensuring conformance to KPFF archiving policy., • Coordinate travel needs., • Coordinate food orders for meetings., • Other miscellaneous administrative tasks as assigned. Qualifications The ideal candidate would have worked within the engineering or construction industry previously, assisted in Construction Administration tasks, desire to work with a team, is very organized, flexible with team needs, and has a history of providing excellent service. • 3 years of full-time experience as an Office Administrator, Administrative Assistant, or Coordinator with High School Diploma required., • 3 years of full-time Project Coordinator experience in the construction or engineering field is highly preferred., • Must communicate clearly and professionally in all modes of communication., • Must work in our Downtown Los Angeles office; 8-5 PM; Monday through Friday., • Highly competent with the Microsoft Office Suite (Word, Excel, Outlook, PowerPoint, OneNote)., • Highly competent with Microsoft Teams 365 and SharePoint., • Highly competent with PDF management and editing software such as Bluebeam Revu., • Highly competent with office machines and operations., • Competent in proofing and quality control., • Must be comfortable making independent judgment calls at a level appropriate for their experience., • Experience using third party software preferred (i.e., Procore, ProjectSight, etc.). Additional Information Application Process Please submit: • A resume identifying all previous employment with explanations of any gaps in employment,, • Your most current transcripts for all college level coursework,, • A cover letter addressing the following two prompts at a minimum:, • What does your work ethic look like? – Give examples of your work ethic in action. Physical Demands and Work Environment • Duties require in-person attendance, Monday through Friday, during our business hours of 8 AM to 5 PM at our office in Downtown Los Angeles., • All duties are performed in a typical office environment while sitting at a desk or computer table., • Duties require the ability to actively engage with a computer for several hours per day. Our employees are valued and empowered, collaborative and team oriented, innovative in their approach and passionate about their work. They are reliable, trustworthy and open with a high level of integrity. They value diversity, are inclusive and are committed to critically thinking through problems and finding solutions. KPFF Consulting Engineers participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. KPFF Consulting Engineers is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, creed, ethnicity, national origin, religion, marital status, sex/gender (including sexual orientation or gender identity), pregnancy, veteran status, citizenship status, physical or mental disability, or any other protected basis.

Job DescriptionCompany Description KPFF Consulting Engineers provides structural and civil engineering services to architects, government agencies, developers, and contractors for projects with a wide range of functions. Established in 1960, KPFF has offices in Austin, Birmingham, Boise, Chicago, Des Moines, Eugene, Irvine, Lacey, Long Beach, Los Angeles, Louisville, Nashville, Newport Beach, New York City, Portland, Sacramento, Salt Lake City, San Diego, San Francisco, Seattle, Spokane, St. Louis, Tacoma, and Washington, DC. KPFF's civil engineering staff accomplishes projects for site development, parks, and recreation facilities and the improvements to existing city streets, urban arterials, and highways. Scope of services may include site planning, environmental analysis, storm drainage studies, wetlands enhancement, permit coordination, and design of site grading, drainage, storm detention, utilities, access roads, parking facilities, and public street improvements. In addition to typical site development engineering, our civil group serves as a prime consultant to government clients for management and design of transportation, waterfront, site improvements, and major utility projects. Our engineers work in dynamic teams with open communication and strong support from senior-level mentors. These teams work directly with our clients on some of the most challenging projects in the region. We promote decision-making at the level closest to the issue in order to most efficiently and effectively serve our clients, and to promote professional growth for our staff. Job Description KPFF Los Angeles is always on the lookout for motivated and energetic entry-level civil engineers. We continuously accept applications and review candidates for positions as they become available. Application should include resume, cover letter, and transcripts (unofficial copies are fine). Responsibilties: • Assist in Project Design and Development: Contribute to civil engineering design projects, including site plans, grading, drainage, and utility designs, under the supervision of senior engineers., • Prepare Engineering Calculations and Documentation: Create calculations, drawings, and specifications using AutoCAD and Civil 3D; support technical reports and construction documents., • Conduct Site Visits and Field Investigations: Collect data, monitor project progress, and ensure compliance with design standards and safety protocols., • Support Project Coordination and Scheduling: Help maintain project schedules and documentation, and assist with permits and regulatory compliance., • Collaborate with Cross-Functional Teams: Participate in project meetings, work with contractors and vendors, and contribute to sustainable design and environmental compliance efforts., • Research and Stay Updated on Industry Standards: Engage in research to support innovative engineering solutions and uphold best practices in civil engineering., • Prepare Storm Water Pollution Prevention Plan: Make appropriate changes to the plan and conduct site inspections in accordance with the General Permit issued by the California Water Resources Control Board.Qualifications, • Ideally, candidates should have some experience in site development, however more importantly we seek candidates who have the competency, attitude, and personal commitment to deliver the highest quality work to our clients., • This position requires a B.S. degree or higher and preferably relevant internship experience and Engineer-in-Training (EIT) Certification., • Excellent communication, teamwork, and collaborative skills are essential., • Ability to visit job sites to inspect existing conditions and envision potential scope of work requirements, • Ability to set and/or stand for prolonged periods of time at a desk working on a computer and viewing a screen, • Ability to apply established engineering principles to solve problems and/or overcome obstacles using sound judgement, independent decision making, and prolonged focus, • Candidates will work on a wide variety of demanding projects with growth opportunities based upon their responsiveness, skills, attitude, and commitment. Additional Information Why KPFF? Mentorship & Development: Through KPFF’s Forefront Education Program, you’ll receive unparalleled mentorship from seasoned professionals, empowering you to excel in your career from day one. Thrive in a setting that values your development and independence, where your ideas are welcomed, and your contributions make a real impact. Relationship Building: At our core, we focus on forging meaningful connections. By prioritizing trust and stability, we create lasting relationships with our partners and clients that stand the test of time. Supportive Environment: We cultivate growth in all aspects of your life in a supportive environment that values your well-being. From promoting a healthy lifestyle to organizing social activities, we strive to create a balanced and fulfilling workplace. Benefits: We are passionate about supporting our employees through flexible and comprehensive benefits. Our benefits include: • 401(k) retirement savings plan with employer contribution (regardless of employee contribution), • Medical insurance (two plans available to choose from), • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA) with employer contribution, • Healthcare and Dependent Care Flexible Spending Accounts (FSA), • Life insurance, • KPFF Paid Family Leave, • Short-term and Long-term disability insurance, • Paid holidays (including two floating Holidays), • Paid time off (vacation, sick, jury duty), • Bay Area Commuter Benefits Program (Commuter Check) The base salary for this role is competitive and will be determined based on the candidate's experience, education, and skills. The expected base salary for a qualified candidate with 0-2 years of experience is $80,000 - $88,000. Additionally, we offer performance-based bonuses to recognize and reward outstanding contributions in each Reporting Center. During the interview process, we'll provide detailed information and address any questions you may have about the overall compensation package and benefits. KPFF Consulting Engineers participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. KPFF Consulting Engineers is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, creed, ethnicity, national origin, religion, marital status, sex/gender (including sexual orientation or gender identity), pregnancy, veteran status, citizenship status, physical or mental disability, or any other protected basis.

Job DescriptionCompany Description At Coffman Engineers, we serve as both prime consultant and sub consultant on projects large and small, including commercial, retail, institutional, government, industrial, and project/construction management. Incorporated in 1979, we have employees in more than 23 locations serving clients across the United States and overseas. To meet client objectives and to integrate our many disciplines, we can create teams comprised of civil, structural, mechanical, electrical, fire protection, and corrosion control, as well as project/construction managers and professionals in a variety of specialty services. This ability has made us a leader in the engineering and construction communities, and has strengthened our reputation as being progressive, innovative, and a great place to work. Job Description Designing a better world is more than a career, it’s a calling! Come work with a team of professionals dedicated to design excellence at Coffman Engineers’ Woodland Hills office. Coffman Engineers is seeking a highly skilled, self-motivated Senior Electrical Designer to join our team in applying engineering skills to a variety of diverse and challenging projects for our Woodland Hills office. The successful candidate will have a minimum of ten years of experience in the design and drafting of power, lighting, and low-voltage systems for federal/DOD, commercial, healthcare, educational, industrial, multi-family, and/or high-rise facilities. Qualifications • Technical/associate degree in engineering or related science (preferred), • 10+ years of design and drafting experience, • Graduation from a certified CAD training program at an accredited institution counts as one year of experience, • Proficient in computer-aided drafting (CAD) and Building Information Modeling (BIM), • Possess advanced drafting, BIM/Revit and layout skills, • Create REVIT families and AutoCAD blocks, • Experienced with the latest release of Autodesk AutoCAD and REVIT, • Performing design work without supervision., • Knowledgeable with electrical calculations., • Knowledgeable with Title-24 calculations., • Approximate Base Salary – $90,000 – $105,000 annually., • Paid overtime at 1.5 times hourly rate., • Competitive end of year discretionary bonus based on company/team/personal performance., • Hybrid Work Schedule - Monday - Thursday onsite, Friday's are work-from-home. Additional Information Why You Want To Work Here You could choose to work anywhere, so why work at Coffman Engineers? Because we are different – our culture sets us apart. Simply stated, we are a group of creative, high-performing people who like working together and believe that what we do makes a difference. Employees say that it feels like working with a group of friends in a small office while enjoying the benefits and perks of working for a large firm. Our culture isn’t the only thing that makes us different, but it drives everything we do. Don’t take our word for it. Check out what others are saying: Coffman At A Glance: • 45 years in business, • 850+ employees serving clients throughout the U.S. and overseas from more than 23 locations, • Multi-discipline engineering services plus corrosion control, commissioning and project/construction management, • #27 Top 80 Engineering Firms, Building Design+Construction, 2019, • #29 Zweig Group Hot Firm List, Zweig Group, 2021, • #161 Top 500 Design Firms, Engineering News-Record, 2023 Applying You must apply online for this position. If you are unable to complete our online application process, or if you need assistance to do so, let us know so we can provide a reasonable accommodation. If you are experiencing problems applying through our system, please try again using a different browser or an updated version of your current browser. If that doesn't work, please contact us directly. This position is direct with Coffman Engineers; we are an Equal Opportunity Employer. We do not discriminate on the basis of any status protected under federal, state, or local law. Follow us! Twitter: @CoffmanEngineer Instagram: @CoffmanEngineers LinkedIn: Facebook: @CoffmanEngineers

Job Description About ABGi USA Talent Solutions At ABGi USA, our Talent Solutions team is the engine behind exceptional recruiting and HR support for our clients across accounting, finance, engineering, and professional services. We partner with organizations to source top-tier talent, design scalable hiring programs, and provide fractional or project-based HR expertise tailored to their business goals. When you're hired through ABGi USA, you're not just filling a role — you're becoming part of a curated match that supports long-term growth, innovation, and impact. About the Role We’re hiring a Structural Engineer – Construction Engineering Project Manager on behalf of our client, a nationally recognized structural engineering firm working on some of the most complex and large-scale construction projects in the country. This role is ideal for a licensed civil or structural engineer with strong technical depth, leadership skills, and a passion for construction means and methods engineering. Key Responsibilities • Lead and manage construction engineering projects involving steel erection, shoring design, connection design, heavy lift planning, and on-call contractor support., • Act as a subject matter expert and key contributor to the growth of the Construction Engineering Practice Area in the assigned region., • Supervise and mentor junior engineers and BIM drafters, supporting their development and project contributions., • Oversee preparation of construction documents, specifications, and proposals, including scope, budgets, and schedules., • Build and maintain strong relationships with contractors, clients, and project stakeholders to drive repeat business and new opportunities. What We’re Looking For • Bachelor’s degree in Civil or Structural Engineering (Master’s preferred), • 8–12 years of relevant experience, preferably with a focus on construction means and methods engineering, • California Civil PE required; SE license in California preferred, • Demonstrated leadership and mentoring skills, • Strong communication and client relationship abilities, • Business development mindset with ability to support proposal and strategy work Why Work With Us? • Work with respected companies across the U.S., • Opportunities to grow with our clients or on new projects, • Flexible engagements (full-time, part-time, remote), • Competitive compensation and professional development support Ready to Apply? Submit your resume or reach out to our recruiting team at . We’re excited to get to know you and help match you to your next opportunity!

Job Description Ardurra is seeking a Senior Water/Wastewater Construction Inspector to join our staff in Riverside County, CA. This position is open to both part-time and full-time opportunities. Primary Duties • Knowledge of, and ability to interpret, technical specifications, contract requirements, engineering drawings, and standard construction details are critical requirements of the position., • Responsibilities will include observing that the work is completed in general accordance with the drawings and specifications, daily field reporting, tracking contractor's installed quantities, witnessing tests, documenting test results and serving as liaison between engineer, contractor, and adjacent residents and businesses., • Typical projects involve the construction and/or rehabilitation of water and wastewater infrastructure projects, including pipelines, pump stations, lift stations, and treatment facilities and other infrastructure using various construction methods, construction of water and wastewater treatment structures and equipment installation, as well as mechanical and structural rehabilitations., • Knowledge of construction methods of water, sewer, storm drain and dry utility pipe installations, including open trenching and trenchless methods such as jack and bore and directional drilling are strongly preferred., • Strong verbal and written communication skills and familiarity with operating smart devices and computer preferred., • High School diploma or equivalent., • Civil Engineering related coursework/certifications, associate degree preferred., • 3 to15 years in the Construction field or Construction Management/Field Services Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-LC

Job DescriptionDescriptionAs a Structural Dynamics Engineer at Impulse, your core responsibility will be to determine and validate loads and environments for full vehicles and component subsystems. You will work closely with a fast-paced, agile team that strives to make a high-performance spacecraft from a clean sheet design. Responsibilities • Determine critical loads during launch, deployment, on-orbit operation, and ground handling, • Generate and apply forcing functions for engine-borne dynamic excitation, • Determine appropriate environments from vibration, acoustic, and shock sources, • Develop and improve finite element models of primary structures and mechanisms, • Develop and integrate Craig-Bampton reduced models for launch vehicle integration, • Generate rigid-body deployment simulations and validate with deployment testing, • Analyze and direct dynamic testing from pre-test analysis to post-test correlation, • Bachelor’s degree in mechanical or aerospace engineering, • 4+ years of demonstrated experience with structural dynamic analysis of high performance systems, • Proficient with at least one industry standard structural FEA package (Femap/Patran/NASTRAN, ANSYS, Abaqus, etc.), • Demonstrated experience solving structural dynamic or vibration driven problems, • Demonstrated experience with time and frequency domain analysis, • Demonstrated proficiency with Matlab, Python or similar applications, • Demonstrated proficiency with CAD software and the ability to learn new tools, • Ability to communicate technical challenges, explain rationale and/or resolve concerns Preferred Skills and Experience • A graduate degree (MS / PhD) in engineering or related field working with numerical methods, • 6+ years hands-on experience with dynamic structural testing, including: random vibration, acoustics, sine vibration, sine burst, shock, and modal survey, • Hands-on experience with sensor selection, test parameter selection, and data analysis, • Working knowledge of launch vehicle loads, • Demonstrated experience with acoustic vibration analysis software such as VA One, • Demonstrated experience working on a launch vehicle or satellite development effort, • Previous experience in a startup or agile development environmentAdditional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off Position Title: Senior Regional Construction Scheduler Location: Los Angeles Unified School District - candidate must be able to commute to Los Angeles, CA Due Date: Continuous until positions are filled Duties: • Reporting directly to the Sr Construction Manager for Scheduling and Estimating and provides updates and prepares reports for upper management in order to meet Key Performance Indicators., • Supervise Project Schedulers to ensure project timelines are met and interfaces with OARs, Senior Project Managers and other site staff and contractors related to the review of CPM schedules, preparation of project scope and budget., • Projects staffing needs and makes recommendations to executive staff to improve staff requirements., • Develops and maintains program schedules identifying relationships, logic, milestones, and constraints for construction projects of various types., • Independently interprets and reads detailed construction drawings (Architectural, Structural, Mechanical, Electrical, Plumbing, Civil, etc.) and develops a clear understanding of work scope., • Reviews Contractors Baseline schedule submissions and verifies that all work scope is identified properly and logically sequenced correctly; provides written detailed schedule review comments., • Performs QA/QC on contractor schedule submittals for conformance with contract terms; reviews critical path, cost loading, resource loading of man-hours, schedule content, recovery schedules, use of logic relationships and lags, constraints and milestones., • Performs schedule Time Impact Analysis for any change orders that affect the construction schedule; conducts schedule negotiations with the OAR and the contractor for any delay time settlements., • Reads drawings to determine if work is in or out of scope, and understands terms and conditions of the contract to determine if any compensable or non-compensable time extensions have merit., • Performs Critical Path analysis and Earned Value analysis., • Walks the construction sites as needed and checks the contractors weekly/monthly schedule progress; provides reports to the project OAR and upper management., • Effectively communicates with the Contractor regarding all schedule/progress related matters and concerns in the weekly status meetings and all other schedule related meetings., • Performs Program Schedule QA/QC reviews on a regular basis., • Performs status updates for Program Schedules/Master Schedules on a bi-monthly basis. Required Experience: • Minimum eight (8) years full time paid professional experience in Construction Scheduling for an Owner or General Contractor, preferably in an educational facility or public works projects., • Graduation from a recognized college or university with a bachelors degree in architecture, engineering or construction management.OR, • Excellent written and verbal communication skills, • Superior organizational and planning skills, • Ability to build efficient working relationships with project teams and department staff, • Understanding of theories, principles and practices of cost engineering, scheduling and schedule forensics Offered rate of compensation will be based on a variety of non-discriminatory factors, including education, qualifications, experience, and geographic location. The salary range for this position is $160,000 - $175,000.

Job Description A nationally recognized engineering firm with offices across the U.S. is seeking a Senior Structural Engineer for its Woodland Hills, CA office. This full-time role is ideal for someone with 10+ years of experience in building design who's ready to lead projects and mentor junior staff in a collaborative, multi-discipline environment. The firm works on a wide range of projects including commercial, institutional, and government buildings. The ideal candidate will be a licensed PE or SE with strong experience in steel, concrete, and wood structures, and a solid understanding of structural analysis and detailing. Responsibilities: • Lead structural design efforts for buildings using steel, concrete, and wood, • Perform and oversee analysis, detailing, and coordination with project teams, • Manage engineers and drafters to deliver high-quality drawings, • Support construction phases with responsive engineering input, • B.S. in Civil or Structural Engineering, • PE or SE license (any state); CA SE preferred, • 10+ years of experience in building design, • Strong communication and leadership skills, • Experience with ETABS, RISA, SAFE We believe that every professional should benefit from the advice of a trusted partner throughout their career. We provide that partnership to mid to senior level professionals within the Energy, Environmental & Infrastructure spaces through our network of micro-specialist consultants. Each team within LVI Associates focuses on a specialist area of Energy & Infrastructure. I specialise in sourcing and placing senior level candidates within the bridges and highway construction spaces. Make LVI Associates your career partner; ensure your career journey is exceptional.LVI Associates exists to enable exceptional careers around the world; we connect exceptional talent, with exceptional opportunities.\r\n\r\nWe believe that every professional should benefit from the advice of a trusted partner throughout their career.\r\n\r\nWe provide that partnership to mid to senior level professionals within the Energy, Environmental & Infrastructure spaces through our network of micro-specialist consultants.\r\n\r\nEach team within LVI Associates focuses on a specialist area of Energy & Infrastructure. I specialise in sourcing and placing senior level candidates within the bridges and highway construction spaces. \r\n\r\nMake LVI Associates your career partner; ensure your career journey is exceptional.

Job Description Ready to take your engineering career to new heights? We're seeking a talented Structural Project Engineer with 4-6 years of experience who's passionate about creating innovative, sustainable designs. If you're excited about shaping the built environment while growing your career, keep reading! Who We Are: We're Holmes US - a structural engineering firm that's anything but boring! With offices across the West Coast and roots in New Zealand, we're known for pushing boundaries and taking on projects that make other firms say, "Wait, how did they do that?" Your Impact: • Design innovative building structures across multiple materials, • Apply your expertise in concrete, steel, masonry, and wood, • Collaborate with dynamic project teams, • Begin mentoring junior engineers, • 4-6 years of existing building, commercial, and multi-family housing experience, • B.S. or M.S. in Civil/Structural Engineering, • PE license (passed exam or about to), • Seismic design experience, • Strong technical and communication skills, • Proficiency in ETABS, SAP, RISA 🌟 Engineering That Matters • Work on diverse, challenging projects, • Learn from industry leaders across US and New Zealand, • Apply cutting-edge design approaches, • Clear career progression path, • Mentorship opportunities (both giving and receiving), • Regular technical training and development, • Flexible hybrid work environment, • Comprehensive benefits (including pet insurance!), • Genuine work-life balance, • Collaborative, supportive culture Depending on your employment status, benefits may include: • Hybrid work model (In office Tues-Thurs with option to work remotely Mon & Fri), • Comprehensive Medical, Dental, Vision, Life, AD&D, Short-term and Long-term Disability and other voluntary plans, • Flexible Spending Accounts for Medical & Childcare, • Health Savings Account, • Pet Insurance, • Employee Assistance Program, • Paid Time off - Vacation, Sick, Personal Leave, Family Leave for new parents, and Community Service time, • Paid Holidays, • Pre-Tax Commuter Transit, • 401(k) retirement savings with Company contribution, • Company sponsored events Our Commitment: At Holmes, we believe in building teams as diverse as the communities we serve. We provide equal support and opportunities for all our people to thrive, grow, and develop. Dream big - we'll help you get there! Ready to join a team that believes in pushing boundaries and having fun while doing it? Apply now and let's create something amazing together! 🏗️ P.S. - We promise you'll never run out of exciting projects or people who get just as excited about structural engineering as you do! 🤓 Powered by JazzHR qaxL41tmGG

Job Description Who Are We? FDH Aero is a trusted global supply chain solutions partner for aerospace and defense companies, helping to shape the industry by simplifying the supply chain. With over 60 years serving as a leading independent industry partner, FDH specializes in hardware, electrical, consumables and expendables, licensed products, and value-added services for global OEM and aftermarket customers. FDH is headquartered in Commerce, California, and has operations across the Americas, EMEA and APAC. FDH Aero – named a Best Places to Work in Aviation in 2024 – has locations in 14 countries across the globe, with more than 1,500 best-in-industry employees and over 650,000 square feet of inventory space. FDH is headquartered in Commerce, California, and has operations across the Americas, EMEA and APAC. FDH Aero – named a Best Places to Work in Aviation in 2024 – has locations in 14 countries across the globe, with more than 1,500 best-in-industry employees and over 650,000 square feet of inventory space. Why Work Here? At FDH Aero, we understand that the strength of our brand comes from our people. We invest in driven, diverse and experienced professionals who are naturally curious, courageous and motivated towards action. We value tempering confidence with humility, and a mission that always starts with service-first. Our values guide everything we do: We Are Service First - We act with agility and intelligence to solve our partner’s most pressing needs. We safeguard our trusted relationships by communicating with clarity and unmatched follow through. We Are Respectful - We behave with dignity, fairness, and acceptance. We thrive by prioritizing empathy, humility, and connection to our collective community. We are Amplifiers - We invest in driven, diverse and experienced professionals, businesses and partners. We fuel the entrepreneurial spirit by providing autonomy, authority and a clear mission. We Are Open-Minded - We communicate with intention, curiosity, and diversity of thought. By actively contributing with courage and candor, we challenge the status quo and innovate together. We Are Accountable - We own responsibility for our outcomes. We set expectations, embrace critique, and empower every employee to take immediate actions on challenges they encounter. We Value Our People - That’s why we offer competitive benefits, including medical, dental, vision, Flexible Spending Accounts (FSA), 401k matching, and wellness programs. We invest in training, mentorship, and career development to empower our employees to reach their full potential. Our commitment to culture and excellence has earned us recognition as one of Aviation Business News' Best Places to Work in Aviation. As a team member at FDH Aero you are trusted to deliver, to innovate, and to drive next-generation solutions for tomorrow’s supply chain demands. Ready to make an impact? We proudly pursue top talent with a diverse and global set of experiences and backgrounds. We Are Looking For The Quality Engineer will support and enforce the quality control systems to ensure standards are established, achieved, and maintained to meet the requirements of the Company, Industry, and Customer standards. They will be the focal point for interfacing Quality Assurance issues with internal and external customers and suppliers, ensuring compliance to the appropriate requirements including non-conformance analysis and implementation of effective countermeasures. What You'll Do (Responsibilities) • Establish and communicate facility audits to include internal, customer, and 3rd registrar audits, • Establish and maintain the organization’s audit guidelines, • Facilitate audit activities with 3rd party auditors, customers, and internal team members to include pre-briefings, kick off, and debriefings, • Document audit findings and observations using corrective actions and ensure team members complete required actions, • Establish clear criteria to measure supplier performance and recommend the appropriate actions for suppliers that excel (skip lot), or fall short (corrective actions, audits etc), • Communicate with vendors as needed to improve performance, resolve issues and support internal teams, • Work with cross-functional teams to determine primary issues for customers, and primary reason for returns with suppliers to drive improvement and increase performance, • Prioritize actions using methodologies including Voice of Customer (VOC), Measurement Systems Assessment (MSA), Failure Mode Analysis (FMEA), Cause and Effect (C&E), and Control Parameter Management (CPM), • Utilize appropriate quality analysis tools to review the quality processes to drive improvement and ensure continued compliance with customer requirements, specifications, and quality performance expectations, • Schedule and track Inspection and Quality activities to achieve maximum effectiveness and efficiency, • Ensure a high level of internal and external customer service by investigating and correcting customer issues and complaints, • Regularly report customer and supplier quality metrics such as First Time Quality performance and internal / external defect rates, • Contribute to team effort by working cross functionally to deliver the desired results for the business, • Perform other duties as assigned What You Bring (Qualifications & Skills): • Bachelor’s degree in aerospace engineering, Manufacturing, Mechanical, Industrial, Structural, Systems, or related field from an Accredited Institution, • 1-3 years of experience in distribution, manufacturing, or Supply Chain, • 1-3 years of experience working in Aerospace quality systems preferred, • Ability to understand and interpret engineering technical data, such as manufacturing or part drawings, to provide guidance to cross-functional teams, • Significant experience working directly with customers and suppliers, • Must have excellent written and verbal communication skills, as well as strong problem solving, organizational, project management and decision-making skills, • Understand internal and external customer requirements with a high attention to detail in resolving findings Knowledge of aerospace quality standards, • Ability to process and effectively communicate information using MS 365 Suite of tools (i.e., PowerPoint, Excel, and Word) Special Requirements: • U.S. Citizen, U.S. Permanent Resident (Green Card holder) or asylee/refugee status as defined by 8 U.S.C. 1324b(a)(3) required., • ITAR requirement FDH Aero is an Equal Opportunity Employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability status, protected veteran status, or any other characteristic protected by law.

Job DescriptionCompany Description At KPFF Consulting Engineers, we are more than just an engineering design firm. For over 60 years, we have dedicated ourselves to innovative, sustainable engineering that shapes the built environment and tackles complex infrastructure challenges. Our team culture emphasizes balance, growth, and well-being, supporting each member’s professional journey with flexibility, generous benefits, and a collaborative approach to work-life integration. With over 1,400 professionals across 27 offices nationwide, KPFF’s decentralized structure allows each office the flexibility to pursue projects aligned with their regional strengths. Learn more at . Job Description The Special Projects Division of KPFF is growing and looking for an ambitious and initiative-driven Civil Engineer to strengthen our dynamic team in Long Beach, CA. You will be in the heart of downtown Long Beach, working on a diverse range of heavy civil and industrial infrastructure projects. As a key member of our team, you'll not only refine your existing expertise in site and land development, but also dive deep into the realms of design, project management, and delivering unparalleled client service. Get ready to surround yourself with an unmatched support system, amplify your capabilities, and become a true consulting expert in the field! What You’ll Be Doing: Civil Design and Development: • Apply your engineering expertise to diverse projects, collaborating with teams to devise innovative solutions drawing on best practices in areas such as linear utility projects, street improvements, design/build initiatives, and transportation infrastructure., • Contribute to projects involving waterfront developments and industrial developments, leveraging your skills to drive successful outcomes in these specialized areas., • Learn to assess risks and develop mitigation strategies to contribute to project success., • Gain experience in ensuring regulatory compliance throughout the project lifecycle, including understanding regulations and permitting requirements., • Assist in managing project tasks, ensuring efficient coordination of timelines, budgets, and resources to achieve successful project outcomes., • Conduct site visits and inspections as necessary to ensure compliance with project requirements and industry standards., • Foster strong client relationships by actively listening to client needs, providing clear communication, and delivering customized solutions that align with their objectives., • Serve as a trusted advisor to clients, offering expert guidance and proactive support throughout all phases of the project lifecycle.Qualifications Who We’re Looking For: • Bachelor's degree in Civil Engineering., • Engineer-in-Training (EIT) certification., • Minimum three years of full-time experience in relevant civil/site development engineering design. (Internship experience is appreciated but does not count towards the three-year minimum requirement.), • Proficiency in Microsoft Office Programs, • Proficiency and experience in AutoCAD for construction document creation., • Preferred familiarity with Civil 3D and MicroStation., • Excellent teamwork, communication, and interpersonal skills., • Proven capability to work dynamically and effectively in a collaborative environment., • Demonstrated enthusiasm for developing design and project management skills., • Commitment to delivering exceptional client service and exceeding expectations. Additional Information Physical Demands and Work Environment: • Duties are primarily conducted in a standard office setting, requiring prolonged periods of sitting at a desk or computer table., • Occasionally may be required to lift objects weighing up to 15 lbs., • Occasionally visiting project locations and performing field inspections which may involve walking, standing, kneeling, or navigating uneven terrain. Join KPFF for a career adventure that celebrates your expertise and fuels your development. Here, autonomy and innovation converge, empowering you to tackle complex challenges and blossom into a consulting trailblazer. Our culture fosters teamwork, ownership, and common values, ensuring that your accomplishments are celebrated and your career trajectory is in your hands. At KPFF, we're not just coworkers; we're a vibrant community fueled by collaborative creativity, offering you the chance to leave a lasting mark on pioneering projects. We are passionate about supporting our employees through flexible and comprehensive Benefits. Our Benefits include: • 401(k) retirement savings plan with employer contribution (regardless of employee contribution), • Medical insurance (two plans available to choose from), • Dental insurance, • Vision Insurance, • Health Savings Account (HSA) with employer contribution, • Healthcare and Dependent Care Flexible Spending Accounts (FSA), • Life insurance, • KPFF Paid Family Leave, • Short-term and Long-term disability insurance, • Paid holidays (including two floating Holidays), • Hybrid work environment, • Professional development education opportunities, • Mentorship program, • Monthly social events, • Professional Licensure Recognition Program, • Winter parties and summer picnics, • Office committee opportunities The base salary for this role is competitive and will be determined based on the candidate's experience, education, and skills. The expected range for a qualified candidate with 3-5 years of experience is $96,000-$116,000. Additionally, we offer performance-based bonuses to recognize and reward outstanding contributions in each Reporting Center. During the interview process, we'll provide detailed information and address any questions you may have about the overall compensation package and benefits. About Us KPFF Special Projects Division Since 1996, KPFF's Special Projects Division has been at the forefront of addressing specialized challenges in project development. With over 130 team members in three offices strategically located in Long Beach, CA, Tacoma, WA, and Seattle, WA, our approach combines dedicated project managers, a skilled technical team, and a commitment to innovation. We offer a comprehensive range of services including civil, structural, and mechanical engineering, machinery design, construction and project management, and planning services. We specialize in the management and design of heavy civil, structural, industrial, and waterfront infrastructure projects across the United States. Our team thrives on solving unique, multi-disciplinary challenges, collaborating closely with clients such as the Ports of Long Beach, Los Angeles, Tacoma, and Seattle, as well as various municipalities and government agencies. KPFF Consulting Engineers participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. KPFF Consulting Engineers is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, creed, ethnicity, national origin, religion, marital status, sex/gender (including sexual orientation or gender identity), pregnancy, veteran status, citizenship status, physical or mental disability, or any other protected basis.