Trabajos system operator en Syracuse, New YorkCrear alertas

Job Description ACME Operator-Screw Machine Operator ACME Operator will be cross trained in a variety of screw machines to support the department operations and fulfilment of company production goals.The Screw Machine Operator will produce machined parts from a variety of metals to required specifications by operating applicable machining equipment. Schedule: Regular work schedule will reflect Monday – Thursday 3pm - 1am. Pay: $22.00 - $24.00 per hour plus a 10% shift differential for working second shift. Job Description including but not limited to: • Produces parts to required specifications by setting and operating conventional lathes, mills, and other machinery., • Prepares machine for production including oiling the machine, starting and checking first part for possible defects., • Replaces tooling and makes minor adjustments with minimal to no supervision., • Ensures stock does not run out during production by inserting bar stock into spindles at end of machine., • Continuously cleans out chips during assigned shift., • Makes quality work using 3-pan system., • Checks parts after and during stock-up., • Makes out tickets that contain part numbers, machine number, operator number and date., • Maintains operational status of machine by monitoring condition of assigned machine., • Maintains work area and equipment in a clean and orderly fashion, abiding by company rules and safety regulations., • Performs all other duties as assigned. Requirements: • Education & Experience:, • High School Diploma or GED, trade school certification a plus, • 1-3 years of prior ACME operation experience., • Knowledge:, • Ability to read, write, and communicate in English., • General computer skills with the ability to use and learn SAP., • Ability to interpret geometric dimensions and tolerances (GD&T)., • Basic mathematical knowledge to perform addition and subtraction., • Ability to utilize hand tools and have strong mechanical abilities., • Proficiency in blueprint reading., • Knowledge of and the ability to use micrometers and calipers., • Must demonstrate safe working habits, the ability to follow directions and work with minimal supervision., • Ability to work effectively in a team environment in a culturally diverse workplace. Staffworks is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, national origin, sex, age, disability, veteran status, sexual orientation, gender identity or any other basis protected by federal, state or local law. Apply to: www.staffworkscny.com

Job DescriptionScrew Machine Operator Hours: 2nd shift 4:00pm-2:00am Days: Monday- Thursday Pay: $16.50 per hour plus 10% shift differential = $18.15 per hour Must train on 1st shift until training is complete Monday-Thursday 5:00am-3:00pm $16.50 per hour Staffworks is seeking a reliable Screw Machine Operator to join their award-winning team! What's in it for you? - Shift Differential - Weekends Off - Temp to Hire Position - Will train person for position Screw Machine Operator Details: - Produces parts to required specifications by setting and operating conventional lathes, mills and other machinery. - Prepares machine for production including oiling the machine, starting and checking first part for possible defects. - Replaces tooling and makes minor adjustments under necessary supervision. - Ensures stock does not run out during production by inserting bar stock into spindles at end of machine. - Continuously cleans out chips during assigned shift. - Makes quality work using 3-pan system. - Checks parts after and during stock-up. - Makes out tickets that contain part numbers, machine number, operator number and date. - Maintains operational status of machine by monitoring condition of assigned machine - Report any needed repairs to the Maintenance Mechanic - Maintains work area and equipment in a clean and orderly fashion, abiding by company rules and safety regulations. - Performs all other duties as assigned. Screw Machine Operator Requirements: - High School diploma or GED, trade school certification a plus. - 1-3 years of prior Screw Machine operation experience. - Ability to read, write, and communicate in English. - General computer skills with the ability to use and learn SAP. - Ability to interpret geometric dimensions and tolerances (GD&T). - Basic mathematical knowledge to perform addition and subtraction. - Ability to utilize hand tools and have strong mechanical abilities. - Proficiency in blueprint reading. - Knowledge of and the ability to use micrometers and calipers. - Must demonstrate safe working habits, the ability to follow directions and work with minimal supervision. - Ability to work effectively in a team environment in a culturally diverse workplace. We are an Equal Opportunity Employer and celebrate diversity at all levels of our organization. How to Apply www.staffworkscny.com 315-455-9675 Apply now for immediate consideration! "INDITES"

Job DescriptionWarehouse Operator Why Byrne At Byrne, we foster a culture built on teamwork, excellence, and professionalism. Our greatest strength lies in the exceptional talent and dedication of our team members across every part of the organization. We value their contributions and ensure they’re recognized, rewarded, and compensated in ways that reflect their impact and expertise. Pay and Benefits • Hourly Range – $21.00 - $31.00 per hour, • Competitive bonus programs, • Medical, Dental, Vision benefits available day 1 of employment, • Supplemental benefits available on day 30 of employment, • Eligible for 401 (k) with a company match available on day 90 of employment, • Educational Support via tuition reimbursement and scholarship program Work Shift and Location 6600 New Venture Gear Dr. Bldg. 210 East Syracuse, NY 13057 N2 - 6pm - 630am rotating weekend schedule Job Overview The Warehouse Operator plays a key role in executing assigned warehouse tasks. This includes operating warehouse equipment, good communication, and effective teamwork in accordance with standard operating procedures. Key Responsibilities • Pick and pull customer orders in correct sequence using warehouse management systems and proper code date procedures., • Receive and unload incoming product from suppliers and production facilities; verify quantity, item numbers, and load IDs; create load ID numbers and scan pallet labels in the warehouse system., • Assign and organize inventory to appropriate storage locations while maintaining proper product rotation by date and code for quality assurance., • Maintain accurate inventory records and documentation of all product movement within the warehouse, ensuring proper record keeping and filing procedures., • Communicate proactively with Warehouse Supervisor/Lead/Senior regarding any issues that may impact load schedules, customer satisfaction, or operational productivity., • Report mechanical malfunctions and identify opportunities for operator involvement in resolving equipment concerns to improve productivity. Min. Qualifications • GED or High School Diploma is preferred., • Direct or related experience of 1 year is highly preferred., • Must be able to operate forklifts, pallet jacks (manual/electric.) Byrne Headquartered in LaFayette, Byrne is a Central New York-based dairy company with a legacy spanning over 90 years. Its operations include an extended shelf-life (ESL) and ultra-high temperature (UHT) pasteurization plant in DeWitt, as well as an ESL manufacturing facility in Cortlandville. Byrne also maintains warehouse facilities in Syracuse and East Syracuse, along with a dedicated ice cream center in Syracuse. As a recognized industry leader, Byrne continues to drive innovation at the forefront of dairy processing and product development.

Job Description TJ Sheehan Distributing, the Anheuser-Busch wholesaler for Onondaga County along with a diverse portfolio of craft beers and imports for Central and Western New York State, is currently seeking to fill a full-time Night Warehouse Forklift Operator/Order Selector position in our operations department. This position is a hands-on role that requires physically picking the cases of beer for pallet loading in an accurate and efficient manner to complete delivery orders. We provide our Warehouse Operators with state-of-the-art technology to ensure they are fully prepared and set up for success in their roles. Our Warehouse Operators are trained from within to be successful and learn key aspects of beer wholesaler operations from the ground up. We are looking for an energetic individual with a strong sense of responsibility to join our team. We also offer a generous employee benefit package. Schedule: Sunday - Thursday, 9PM-5AM What you'll be doing: • Unload delivery trucks, • Stock shelves & rollers as required, • Operating an electric and hydraulic pallet jack, and forklift, • Building orders for retail account delivery, • Verify that trucks have been loaded properly, • Sweep, stack empty pallets, and pick up stretch wrap, and dump trash barrels throughout warehouse, • Level off pallets on load line & make sure products are left in proper location., • Other duties as assigned What you need to succeed: • Prior warehouse experience a plus, but not necessary as we train in-house, • Ability and willingness to become certified on forklift operations, • Must be able to learn voice pick system & work independently, • Ability to read, write, and fundamental math skills, • Strong attention to detail and work ethic, • Safety consciousness Why join us? • Hourly Rate of Pay is $20.80 + night differential, • $3000 sign on bonus offered, • Medical/Dental/Vision Insurance - low premium contribution, • Paid Time Off, • Tuition Assistance Program, • 401k Savings Plan with company match (after service requirement), • Discounted Pet Insurance, • Computer and cell phone plan discounts, • Supplemental Plans available: Disability, Life Insurance, Legal & Identity Protection, • Bonus Pay The Sheehan Family Companies are proud to be an equal opportunity employer. We believe in an inclusive culture that provides mutual respect with salary advancement based on merit and individual performance. Sheehan Family Companies is committed to equal employment opportunities and does not discriminate against any protected class. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. *In applying for this job and providing your phone number, you are authorizing the Sheehan Family Companies to contact you via text message for recruiting purposes. You may opt out of text messaging at any time.

Job DescriptionArmstrong has an opening for a first shift CNC Programmer. Armstrong Rapid Manufacturing has been in business for over 50 years in the East Syracuse NY area. Armstrong specializes in both prototyped and low volume production machined castings. Armstrong has a benefit package that includes paid holidays, bonus and referral programs, paid vacation, 401K, 100% company paid life insurance, sick time, supplemental short term disability insurance, dental, medical, accident, safety awards, cancer and critical care insurance. We also provide free coffee daily for our employees available at multiple coffee kiosks. Our website is www.armstrongrm.com and it shows many of the exciting aspects of our company! Take a look!The Salary Range for our non-exempt CNC Programmer job is $35.00-$40.00 per hour with the job description below: Summary/Objective: The CNC Programmer prepares detailed manufacturing instructions and programming data to produce machined parts and sub-assemblies using horizontal and vertical CNC machining centers to meet engineering drawings and specifications. The CNC Programmer determines manufacturing procedures and operation sequencing and establish tooling, gauging, and machine requirements to fabricate parts and sub-assemblies for various products, primarily from aluminum castings with some aluminum billet machining. In addition, the CNC Programmer spends time in the machine shop solving problems and improving processes in a team environment. Job ResponsibilitiesCreates medium to high complexity CNC programs using three+ axis CAM software. Works offline to produce a robust CNC program maximizing software capabilities that will simulate accurately at the PC avoiding collisions and excess time at the work center. Provides CAM support, downloads programs to CNC controls, makes or supports in the initial set up/prove out, obtaining of first piece approval and turns over production of part to operator. Diagnoses, analyzes, and troubleshoots programs.Assures compatibility of engineering drawings and specifications with manufacturing and fabrication capabilities by reviewing drawings and making suggestions for changes and revisions to enhance productivity.Reprocesses and/or modifies existing programs for increased efficiency and productivity.Originates studies directed towards more efficient manufacturing of parts. Including recommendations for changes in equipment, process methods, materials, and designs.Works with Quality to create a robust CMM/manual inspection process.Completes and/or maintains required reports and records i.e. CNC tooling lists. Creates work and setup instructions for machinists.Checks completed programs/changes by running simulations prior to posting code.Ensures correct speeds and feeds based on manufacturer cut data.Proactively supports the ISO process approach to quality management per our system requirements.Adheres to all safety policies and practices, consistently uses personal protective equipment and practices good housekeeping. Maintains regular on-time attendance and adheres to company policies, procedures, and standards of conduct. Maintains a positive professional approach with all internal and external controls. Applies classroom and on the job post training information, knowledge, skills, and abilities consistently in a quality-oriented manner (wherein the KSAs are part of the jobs tasks, duties and other tasks as requested).Willingness to do other tasks as required. Educational, Experience Based, and Skill QualificationsA.A.S in Mechanical technologies or equivalent work experience and demonstrated ability to program and machine complex geometries. Four (4) years of CNC programming experience desirable preferably with Master Cam.Must have superior computer programming skills.Must have excellent reading comprehension skills.Good math skills, especially algebra, trigonometry, and physics.Must have good problem-solving skills.Must have excellent time management skills.Must have good organizational and planning skills.Must have excellent written and verbal communication skills.Must be highly detail oriented.Must be able to work effectively with little or no supervision.Must have the ability to read blueprints.Knowledge of safety measures pertinent to each job assignmentPhysical RequirementsA combination of walking and sitting at a desk for prolonged periods of time. Must be able to lift up to and including 35 pounds as needed.EEO Statement Armstrong Mold Corporation is committed to equal opportunity, to providing a work environment that is free from unlawful discrimination and will not discriminate with regard to race, religion, color, national origin, sex,gender, gender identity or expression, sexual orientation, age, veteran status, disability, genetic information, or any other protected status. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, gender, gender identity or expression, sexual orientation, age, veteran status, disability, genetic information, or any other protected status. Armstrong Mold Corporation is proud to be an Equal Opportunity Employer (EOE). Armstrong Mold Corporation will make reasonable accommodation(s) for qualified applicants with disabilities and employees If you are interested in applying for employment and feel you need a reasonable accommodation to apply for a posted position, or are an employee with a question contact Human Resources at 315-437-1517 or by email to hr@armstrongrm.com. unless an employee reasonable accommodation would result in undue hardship. Job Posted by ApplicantPro

Job Description SRCTec, LLC is seeking an entry-level Associate Field Service Representative to become one of two OEM representatives supporting local units at Fort Campbell, KY. SRCTec designs, manufactures, and supports advanced radar and sensor systems for a global commercial and defense customer base. This role is ideal for individuals beginning their engineering career, focusing on delivering pre- and post-sales technical support through product demonstrations, training, and field assistance. The candidate will primarily integrate with assigned units providing technical and training support in garrison and deployed to CONUS and OCONUS locations (excluding danger zones). Candidate will also develop foundational expertise in SRCTec products, assist in creating technical content to enhance customer success, including on-site consultation and integration support for hardware, software, and network configurations. This position is tied to our customer's military base in Kentucky, and the work will be performed onsite at the customer’s location. This position reports to a supervisor in Syracuse, New York and is funded through December 2026. Continued employment beyond that date is contingent upon the annual renewal or re-award of the current contract. What You’ll Do • Assist in field training and service support at customer locations, both domestically and internationally, under close supervision, • Engage with customers and end users to understand and document expectations, collaborating with internal teams to meet requirements, • Contribute to a collaborative, customer-focused engineering culture, supporting team efforts to deliver value to clients, • Support customer operational needs, including occasional last-minute travel to potentially austere field sites, • Provide technical assistance to engineering, quality, configuration management, and subcontract teams on routine tasks, including guidance on handling, installation, and utilization of systems and equipment, • Develop and document after-action reports to support continuous improvement, • Assist in providing on-site consultation oversight and integration support for existing hardware, software, network configurations, and new system initiatives within area of responsibility, • Contribute to advising on technical requirements for products, services, support equipment, and electronic equipment installations, • Help in the development and adherence to area-wide procedural/policy changes What You’ll Bring • Associate’s degree, vocational certification, or military experience in an engineering-relevant field with 2+ years of work experience, or Bachelor’s degree in an engineering -related field with 0+ years of experience (equivalent combination of education, training, and experience considered, such as familiarity with radar, RF-based, communication, or navigation systems), • Basic understanding of principles, theories, and concepts in technical domains related to hardware, software, and network integration, • Familiarity with test equipment such as multimeters, network analyzers, spectrum analyzers, signal generators, or oscilloscopes to diagnose basic electrical and electronic issues, • Ability to read and interpret electronic schematics, mechanical drawings, test/assembly instructions, specifications, and engineering documentation, • Strong written and verbal communication skills with a customer-focused mindset, including the ability to communicate with internal and client project team members, • Self-motivated with good time management skills to handle routine assignments under close supervision, • Ability to work collaboratively within cross-functional teams, interacting with peers, supervisors, and engineering personnel, • Willingness to learn and develop skills as an assistant instructor for operator and maintenance training courses, • Ability to lift, move, and walk with a minimum of 50 pounds, climb towers, and tolerate long flights and periodic long workdays, with or without reasonable accommodations, • General computer skills, including MS Office suite, and basic understanding of TCP/IP networking, • Willingness to travel up to 75% (domestic and international), including potential extended assignments at military or customer locations in austere environments (desert, arctic, or other extreme conditions) with associated environmental and biological hazards, • Must have U.S. passport and DoD Secret security clearance., • Must be able to pass a pre-deployment physical. Ways to Stand Out • Military experience preferred but not required What Sets Us Apart? SRCTec, LLC is a manufacturing and life cycle management company specializing in the cost-effective production of high-quality, high-reliability, advanced military electro-mechanical products. SRCTec is a wholly owned subsidiary of SRC, Inc. SRC is a not-for-profit research and development company that combines information, science, technology and ingenuity to solve “impossible” problems in the areas of defense, environment and intelligence. Across our family of companies, we apply bright minds, fresh thinking and relentless determination to deliver innovative products and services that are redefining possible®. When you join our team, you’ll be a part of something truly meaningful — helping to keep America and its allies safe and strong. You’ll collaborate with more than 1,400 engineers, scientists and professionals — with 20 percent of those employees who have served in the military — in a highly innovative, inclusive and equitable work environment. You’ll receive a competitive salary and comprehensive benefits package that includes four or more weeks of paid time off to start, 10 percent employer contribution toward retirement, and 100 percent tuition support. Total compensation for this role is market competitive. The anticipated salary range for this position based out of Syracuse, NY is estimated at $62,000 to $75,000 annually. The actual salary will vary based on applicant’s experience, skills, and abilities, geographic location as well as other business and organizational needs. SRC offers competitive benefit options, for more details please visit our website. #CJ

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Senior Process Engineer is a key technical leader responsible for supporting the successful transfer, fit assessment, and lifecycle optimization of monoclonal antibody (mAb) and antibody-drug conjugate (ADC) processes within a CDMO manufacturing environment. This role partners closely with MS&T, Plant/Facilities Engineering, and Capital Project Engineering to ensure manufacturing readiness, effective facility fit, and robust process performance. The position requires deep expertise in bioprocessing operations and a strong understanding of equipment design, facility capabilities, and capital project execution to enable seamless delivery of client programs from tech transfer through commercial manufacturing. This role directly enables: • Successful onboarding of new client programs, • Efficient capital deployment and facility utilization, • Robust, scalable, and compliant manufacturing processes Duties & Responsibilities • Serve as the senior process engineering technical owner for assigned client programs, manufacturing platforms, unit operations, and process-related equipment, maintaining accountability from proposal and facility-fit assessment through technology transfer, PPQ, commercial manufacturing, and lifecycle improvement., • Exercise expert-level, independent engineering judgment to make timely, risk-based decisions involving process design, scale-up, equipment capability, utility demand, containment, control strategy, manufacturability, and GMP compliance; clearly document assumptions, rationale, risks, and required escalation., • Lead complex, cross-functional technical problem solving across MS&T, Manufacturing, Quality, Facilities and Plant Engineering, Automation, Capital Projects, EHS, Supply Chain, Validation, and client teams; establish problem statements, align decision criteria, direct root-cause analysis, and drive durable solutions to closure., • Lead facility-fit and manufacturing-readiness assessments for mAb and ADC processes, evaluating process requirements against equipment, single-use assemblies, automation, clean utilities, HVAC, material and personnel flows, capacity, and high-potency containment constraints., • Translate client process knowledge and product requirements into robust engineering bases of design, process descriptions, flow diagrams, mass and energy balances, equipment sizing, utility loads, URS, control requirements, acceptance criteria, and operational-readiness plans., • Own technical gap assessments and solution strategies, integrating product quality, patient safety, operator safety, schedule, cost, capacity, reliability, and business continuity to recommend equipment modifications, procedural controls, or capital investments., • Act as the authoritative process engineering interface with clients and internal governance teams; present technical positions, challenge unsupported assumptions, resolve conflicting requirements, and communicate decision impacts, residual risks, and commitments to senior stakeholders., • Provide technical leadership for technology transfer, scale-up, engineering runs, PPQ, process validation, and routine commercial operations, ensuring equipment and facility readiness, appropriate process controls, and effective transfer of process knowledge., • Lead or approve structured risk assessments for process, equipment, containment, automation, and facility interfaces; ensure critical risks have clear owners, mitigation plans, acceptance criteria, and traceable closure., • Direct resolution of significant deviations, recurring process failures, equipment-performance issues, and manufacturing bottlenecks by applying first-principles engineering, process data, statistical analysis, and systematic root-cause methods; define and verify effective CAPAs., • Provide process engineering leadership through conceptual and detailed design, design reviews, P&ID and layout review, equipment and vendor selection, FAT/SAT, commissioning, qualification, startup, and handover for new installations, expansions, and facility upgrades., • Define and defend process requirements and engineering acceptance criteria for upstream, downstream, ADC, single-use, stainless-steel, hybrid, chromatography, filtration, mixing, and high-potency containment systems, as applicable., • Author, review, and approve high-quality technical deliverables, including engineering assessments, process descriptions, URS, specifications, technical reports, risk assessments, change controls, deviation investigations, validation documents, and decision records, in accordance with cGMP and the site quality system., • Establish and monitor process and equipment performance indicators; identify adverse trends, reliability risks, capacity constraints, and opportunities to improve yield, throughput, cycle time, right-first-time performance, and cost of goods without compromising quality or compliance., • Maintain lifecycle technical ownership by assessing proposed changes, new product introductions, obsolescence, supplier changes, and evolving regulatory or business requirements for impact to the validated state and manufacturing control strategy., • Provide visible on-the-floor technical leadership during critical manufacturing activities and escalations, ensuring safe, compliant execution and disciplined recovery while balancing immediate production needs with long-term process robustness., • Mentor engineers and technical staff, develop engineering standards and reusable problem-solving practices, conduct technical peer reviews, and strengthen organizational capability through coaching, knowledge sharing, and lessons learned across client programs. Education & Experience • Bachelor's degree in Chemical Engineering, Biochemical Engineering, Bioengineering, or a closely related engineering discipline is required; an advanced degree is preferred., • A minimum of 8 years of progressively responsible experience in biopharmaceutical process engineering, manufacturing sciences and technology, process development, manufacturing, or a related technical function; experience in a CDMO or other multi-product, client-facing environment is strongly preferred., • Demonstrated experience providing technical ownership for complex biologics manufacturing processes or unit operations from technology transfer and facility fit through validation and commercial lifecycle support., • Direct experience with mAb manufacturing is required; experience with ADC manufacturing, bioconjugation, high-potency compounds, or containment systems is strongly preferred., • Proven record of leading multidisciplinary technical initiatives, investigations, design decisions, or manufacturing-readiness activities with significant quality, safety, cost, capacity, or schedule impact., • Professional Engineer licensure, Lean Six Sigma certification, project management certification, or relevant pharmaceutical engineering and bioprocess training is beneficial but not required. Knowledge, Skills, Abilities • Expert knowledge of biopharmaceutical process engineering, including upstream and downstream mAb operations, scale-up, mass and energy balances, equipment sizing, controls, clean utilities, and facility fit., • Technical depth in relevant areas such as cell culture, harvest and clarification, chromatography, filtration and TFF, formulation, buffer and media preparation, mixing, single-use or stainless-steel systems, and ADC processing., • Strong command of cGMP, engineering practices, validation lifecycle principles, change control, deviations and CAPA, data integrity, quality risk management, and technically sound GMP documentation., • Proven ability to apply first-principles, risk-based judgment and structured problem-solving methods—including root-cause analysis, FMEA, statistical and trend analysis—to resolve complex technical issues and verify effective corrective actions., • Experience leading cross-functional facility-fit, technology-transfer, scale-up, engineering-run, PPQ, validation, commercial-support, and lifecycle-improvement activities in a fast-paced, multi-client CDMO environment., • Ability to translate process and client requirements into engineering deliverables and support capital projects from design and vendor selection through FAT/SAT, commissioning, qualification, startup, operational readiness, and turnover., • Strong client-facing communication, stakeholder influence, automation and data-systems awareness, audit and inspection support, and leadership skills, including mentoring, peer review, knowledge sharing, and development of repeatable engineering standards. Physical Demands • The physical demands of this position may include independently lifting and carrying items weighing up to 50 pounds; sitting, standing, walking on level surfaces, crouching, squatting, kneeling, and crawling; climbing stairs and ladders; and performing visual inspections of equipment and installations. The role also requires the use of applicable personal protective equipment (PPE), including a hard hat, hearing protection, safety glasses, steel-toed footwear, fall-protection equipment, and electrical-safety gear. Work Environment • The work environment may include office, laboratory, indoor, and outdoor settings. The position may require working independently or in proximity to others and may involve exposure to elevated noise levels, work at heights, and access to confined or restricted spaces. Travel This role may require up to 10% travel. Target Bonus 16% Work Location: East Syracuse, NY New York Pay Range $110,000—$154,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description Join our Page Trucking Team today! Title: Safety Director Position: Full-time Salary: $110,000-$150,000 (based on experience) The Corporate Safety Director provides technical safety and health direction and oversight to staff and corporate personnel. Develops corporate safety and health programs and objectives and coordinates safety training programs. Monitors safety and health regulations to ensure compliance with Federal and State safety and health regulations. Ultimate goal: Keep staff, drivers and equipment safe. Duties and Responsibilities: • Direct the safety of all staff and drivers, orientation, ongoing driver training and accident prevention activities including:, • Introduction/management of programs and technologies to reduce accidents/incidents, • Reducing the frequency of work-related injuries, • Improving CSA (Compliance, Safety & Accountability) scores, • Reduction in physical damage, liability and cargo claims; frequency and cost, • Direct, oversee and hold accountable all Safety Staff or any personnel involved in overseeing safety sensitive functions to ensure duties are responsibilities are met:, • Ensure all safety policies and procedures are clearly outlined/documented, • Ensure all staff is trained and held accountable to the standards outlined in the policies/work instructions, • Works closely with Risk Manager to:, • Confirm daily, weekly and quarterly responsibilities are being achieved by all staff, • Communicate regarding project statuses and timelines, • Use claim activity to propose modifications/improvements to existing Risk related programs, • Provides technical safety, health support and information to employees and corporate personnel, • Develop annual Company safety goals; identify company safety training needs and develops and coordinates safety training programs., • Initiates, participates or oversees all new/existing product/process reviews, including process hazard analyses, operator training, etc, • Understands Federal and State occupational safety and health regulations and monitors regulatory changes as they occur to ensure Corporate compliance and keep staff/drivers safe., • Promotes safety and health awareness through internal company memoranda, newsletters and specific training programs. Assists as necessary in implementation of a hazard communication program and preparation of reports, • Supports personnel in selection of appropriate personal protective equipment, • Annually reviews and approves corporate safety library (e.g.; videos, regulations and reference manuals), • Responsible for communication with DOT, OSHA and other regulatory agencies where appropriate included Homeland Security/CT-PAT policy, • Audit practices and records to ensure compliance with company programs and federal/state occupational safety and health regulations Company Benefits: • Meritain Aetna (offer two heath plan options), • Company Sponsored HRA card, • Dental Insurance, • Vision Insurance (offer 2 plans), • Colonial Supplemental (accident, medical bridge, disability, cancer, Life/ADD), • Employer Paid Life Insurance policy (1x annual salary), • Pet Insurance / Pet Discount Program, • EAP- Employee Assistance Program, • Monthly Profit Share, once eligible, • 401K with company 401K match, • PTO, • Paid Holidays Qualifications Qualifications: • Bachelor’s degree plus 5 years safety management experience in the transportation industry, • Certification as a Certified Director of Safety preferred, • Knowledge and experience of transporting hazardous materials, • Ability to work in a fast-paced environment, • Experience prioritizing matters and giving clear direction in unexpected situations, • Ability to perform well in stressful situations, • Strong verbal and written communication skills along with the ability to relate well with people from the boardroom to the truck cab and orientation classroom, • Ability to use standard office equipment: computers, phones, photocopiers, fax machines, etc., • Successful candidate will be subject to a pre-employment drug screening and background check Physical Requirements: • Frequently exposed to fumes, airborne particles, moving mechanical parts and vibration, • Noise level in the work environment and on job sites can be loud, • Required to stand, walk, use hands/fingers, handle/feel and reach with hands and arms, • Must be able to read, write, talk and hear Travel: • Travel is primarily local during the business day, although some out of the area and overnight travel may be expected Company Website: • www.pagetrucking.com\nCompany Description Our Culture What makes a company who they are? Is it the people? The Leadership? How they do what they do? Is it something that happens suddenly or something that grows over time? Is it something you aspire to be or something that you actually are? As an owner, it feels like the Company Culture is a quiet pulse. Just as various systems in the body work together to create your pulse, the company culture serves as the pulse of the business, driven by its different internal systems. The people are the heart – they’re the strongest part. The hardest working, don’t stop, can handle the highs and lows of the system. The policies and systems are the immune system. They protect us – sometimes from ourselves, sometimes from the dangers of what we do and sometimes from the weariness that happens over time. Then there is the equipment. The muscles of this analogy – how does a trucking company not flex with the beautiful, capable and highly functional equipment in the fleet? Then there’s leadership- in this analogy what could be considered the brain. Sometimes the decisions we make are a strain to the system and sometimes they are what feeds homeostasis. We’re woven into so much of what has and does happen we’d probably be the nervous system. Think this analogy is corny? You wouldn’t be alone. Dan and Chris J probably will too. And that’s the last part of what drives the pulse in this company – the love and admiration, the spirit. The Company, and its culture, is as human as it gets. Made up of people that have forged bonds with one another, customers and equipment. Made up of people that make mistakes, learn better and then try to do better. A place where sometimes stuff goes awesome and then other times it’s a shit show. But a place where you are in the good company of other good humans. Our culture is like a pulse, sometimes its racing with adrenaline and other times its calmly plugging along. Our Culture\r\n\r\nWhat makes a company who they are? Is it the people? The Leadership? How they do what they do? Is it something that happens suddenly or something that grows over time? Is it something you aspire to be or something that you actually are?\r\n\r\nAs an owner, it feels like the Company Culture is a quiet pulse. Just as various systems in the body work together to create your pulse, the company culture serves as the pulse of the business, driven by its different internal systems. The people are the heart – they’re the strongest part. The hardest working, don’t stop, can handle the highs and lows of the system. The policies and systems are the immune system. They protect us – sometimes from ourselves, sometimes from the dangers of what we do and sometimes from the weariness that happens over time. Then there is the equipment. The muscles of this analogy – how does a trucking company not flex with the beautiful, capable and highly functional equipment in the fleet? Then there’s leadership- in this analogy what could be considered the brain. Sometimes the decisions we make are a strain to the system and sometimes they are what feeds homeostasis. We’re woven into so much of what has and does happen we’d probably be the nervous system.\r\n\r\nThink this analogy is corny? You wouldn’t be alone. Dan and Chris J probably will too. And that’s the last part of what drives the pulse in this company – the love and admiration, the spirit. The Company, and its culture, is as human as it gets. Made up of people that have forged bonds with one another, customers and equipment. Made up of people that make mistakes, learn better and then try to do better. A place where sometimes stuff goes awesome and then other times it’s a shit show. But a place where you are in the good company of other good humans. Our culture is like a pulse, sometimes its racing with adrenaline and other times its calmly plugging along.

Job Description SRCTec, LLC is seeking a highly experienced Senior Field Service Representative to become one of two OEM representatives supporting local units at Fort Campbell, KY. SRCTec designs, manufactures, and supports advanced radar and sensor systems for a global commercial and defense customer base. The Senior Field Support Representative will serve as a subject matter expert (SME) for sustainment-related technical matters, leading pre- and post-sales technical support through expert product demonstrations, advanced training, field support, and remote assistance. The candidate will primarily integrate with assigned units providing technical and training support in garrison and deployed CONUS and OCONUS locations (excluding danger zones). This role also involves mentoring junior FSRs, influencing product design for supportability, developing comprehensive technical content to maximize customer success, and providing on-site consultation oversight and integration support for hardware, software, network configurations, and new system initiatives. This position is tied to our customer's military base in Kentucky, and the work will be performed onsite at the customer’s location. This position reports to a supervisor in Syracuse, New York and is funded through December 2026. Continued employment beyond that date is contingent upon the annual renewal or re-award of the current contract. What You’ll Do • Lead field training and service support at customer locations, both domestically and internationally, resolving complex sustainment challenges, • Partner closely with customers and end users to define requirements, document expectations, and collaborate with internal teams to deliver innovative solutions that enhance product usability, • Excel in a collaborative, customer-focused engineering culture, mentoring junior representatives and driving value for clients, • Address critical customer operational needs with rapid response, including last-minute travel to potentially austere field sites, • Lead advanced troubleshooting, system/sub-system analysis, and component-level diagnostics, • Provide authoritative technical guidance to engineering, quality, configuration management, and subcontract teams to optimize product sustainment, including guidance on handling, installation, and utilization of various systems and equipment, • Develop comprehensive test plans, technical performance assessments, and actionable after-action reports to enhance system performance and customer satisfaction, • Train and mentor junior Field Support Representatives, serving as a lead instructor for operator and maintenance training courses, including coaching and reviewing the work of lower-level technical staff, • Analyze interrelations of logistics activities to propose solutions that improve product sustainment and usability, • Provide on-site consultation oversight and integration support for existing hardware, software, network configurations, and new system initiatives for all sites within area of responsibility, • Advise on technical requirements for products and services, support equipment, and electronic equipment installations, • Assist in the development and ensure adherence to area-wide procedural/policy changes, • Work independently to achieve day-to-day objectives with significant impact on operational results or project deliverables, including responsibility for entire projects or processes within a technical area, • Develop technical solutions to unclear problems and issues that require deep technical knowledge, collaboration with internal experts, and understanding of impact on end-product/solution What You’ll Bring • Associate’s degree, vocational certification, or military experience in an engineering-relevant field with 7+ years of engineering-related experience, or Bachelor’s degree in an engineering-related field with 5+ years of work experience (equivalent combination of education, training, and experience considered, such as expertise with radar, RF-based, communication, or navigation systems), • Deep understanding of and ability to apply principles, theories, and concepts of technical domain, with broad understanding of other related specialty areas, • Expert proficiency with test equipment such as multimeters, network analyzers, spectrum analyzers, signal generators, and oscilloscopes to diagnose complex electrical and electronic issues, • Advanced ability to interpret electronic schematics, mechanical drawings, test/assembly instructions, specifications, and engineering documentation with precision, • Expert ability to synthesize technical product knowledge and customer field experience to assist/lead the development of technical manuals and training material content, • Superior written and verbal communication skills, with a proven ability to deliver exceptional customer service, including communicating with internal and client project team members to influence solution design, process, and approaches, • Highly self-motivated with exceptional time management and leadership skills to manage complex projects independently, • Proven ability to lead cross-functional teams and interact with higher-level engineering leaders, PMs, and customers with minimal supervision, • Extensive experience delivering technical training and certification as a lead instructor for operator and maintenance training courses, • Mastery of technical expertise within the Field Support track and full understanding of U.S. government and company standards related to logistics and sustainment, • Ability to lift, move, and walk with a minimum of 50 pounds, climb towers, and tolerate long flights and periodic long workdays, with or without reasonable accommodations, • Expert computer skills, including MS Office suite, and a firm understanding of TCP/IP networking, • Willingness to travel up to 75% (domestic and international), including potential extended assignments at military or customer locations in austere environments (desert, arctic, or other extreme conditions) with associated environmental and biological hazards, • Must have U.S. passport and DoW Secret security clearance, • Must be able to pass a pre-deployment physical Ways to Stand Out • Military experience preferred but not required What Sets Us Apart? SRCTec, LLC is a manufacturing and life cycle management company specializing in the cost-effective production of high-quality, high-reliability, advanced military electro-mechanical products. SRCTec is a wholly owned subsidiary of SRC, Inc. SRC is a not-for-profit research and development company that combines information, science, technology and ingenuity to solve “impossible” problems in the areas of defense, environment and intelligence. Across our family of companies, we apply bright minds, fresh thinking and relentless determination to deliver innovative products and services that are redefining possible®. When you join our team, you’ll be a part of something truly meaningful — helping to keep America and its allies safe and strong. You’ll collaborate with more than 1,400 engineers, scientists and professionals — with 20 percent of those employees who have served in the military — in a highly innovative, inclusive and equitable work environment. You’ll receive a competitive salary and comprehensive benefits package that includes four or more weeks of paid time off to start, 10 percent employer contribution toward retirement, and 100 percent tuition support. Total compensation for this role is market competitive. The anticipated salary range for this position based out of Syracuse, NY is estimated at $90,000 to $110,000 annually. The actual salary will vary based on applicant’s experience, skills, and abilities, geographic location as well as other business and organizational needs. SRC offers competitive benefit options, for more details please visit our website. #CJ

Job Description SRCTec, LLC is seeking an experienced Field Service Representative to become one of two OEM representatives supporting local units at Fort Campbell, KY. SRCTec designs, manufactures, and supports cutting-edge radar and sensor systems for a global commercial and defense customer base. The ideal candidate will independently deliver high-quality pre- and post-sales technical support through product demonstrations, comprehensive training, field support, and remote assistance. The candidate will primarily integrate with assigned units providing technical and training support in garrison and deployed CONUS and OCONUS locations (excluding danger zones). This role also involves creating technical content to drive customer success and providing on-site consultation oversight and integration support for hardware, software, network configurations, and new system initiatives. This position is tied to our customer's military base in Kentucky, and the work will be performed onsite at the customer’s location. This position reports to a supervisor in Syracuse, New York and is funded through December 2026. Continued employment beyond that date is contingent upon the annual renewal or re-award of the current contract. What You’ll Do • Conduct field training and service support at customer locations, both domestically and internationally, often as a solo or lead representative, • Collaborate closely with customers and end users to define and document requirements, working with internal teams to deliver tailored solutions that meet quality, cost, and schedule goals, • Thrive in a collaborative, customer-focused engineering culture, contributing to team efforts to enhance product usability and sustainment, • Respond promptly to customer operational needs, including last-minute travel to potentially austere field sites, • Perform advanced troubleshooting, system/sub-system analysis, and component-level diagnostics, • Provide technical expertise to engineering, quality, configuration management, and subcontract teams to ensure seamless operations, including guidance on handling, installation, and utilization of various systems and equipment, • Develop and document detailed test plans, technical performance assessments, and after-action reports to drive continuous improvement, • Provide on-site consultation oversight and integration support for existing hardware, software, network configurations, and new system initiatives for all sites within area of responsibility, • Advise on technical requirements for products and services, support equipment, and electronic equipment installations, • Assist in the development and ensure adherence to area-wide procedural/policy changes, • Work independently to achieve day-to-day objectives with impact on operational results or project deliverables, • Develop technical solutions requiring collaboration with internal experts and deep analyses of impact on end-product/solution What You’ll Bring • Associate’s degree, vocational certification, or military experience in an engineering-relevant field with 4+ years of engineering-related experience, or Bachelor’s degree in an engineering-related field with 2+ years of work experience (equivalent combination of education, training, and experience considered, such as experience with radar, RF-based, communication, or navigation systems), • Deep understanding of and ability to apply principles, theories, and concepts of technical domain, with broad understanding of other related specialty areas, • Proficiency with test equipment such as multimeters, network analyzers, spectrum analyzers, signal generators, and oscilloscopes to diagnose electrical and electronic system issues, • Ability to interpret electronic schematics, mechanical drawings, test/assembly instructions, specifications, and engineering documentation with accuracy, • Ability to synthesize technical product knowledge and customer field experience to assist the development of technical manuals and training material content, • Excellent written and verbal communication skills, paired with a customer-centric approach to service, including communicating with internal and client project team members to influence solution design, process, and approaches, • Self-driven with strong time management and organizational skills to independently manage in-track tasks, • Ability to work independently and collaboratively within cross-functional teams, interacting frequently with engineering, SMEs, and customers, • Experience delivering technical training or certification as an assistant instructor for operator and maintenance training courses, • Ability to lift, move, and walk with a minimum of 50 pounds, climb towers, and tolerate long flights and periodic long workdays, with or without reasonable accommodations, • Advanced computer skills, including MS Office suite, and a firm understanding of TCP/IP networking, • Willingness to travel up to 75% (domestic and international), including potential extended assignments at military or customer locations in austere environments (desert, arctic, or other extreme conditions) with associated environmental and biological hazards, • Must have U.S. passport and DoW Secret security clearance, • Must be able to pass a pre-deployment physical Ways to Stand Out • Military experience preferred but not required What Sets Us Apart? SRCTec, LLC is a manufacturing and life cycle management company specializing in the cost-effective production of high-quality, high-reliability, advanced military electro-mechanical products. SRCTec is a wholly owned subsidiary of SRC, Inc. SRC is a not-for-profit research and development company that combines information, science, technology and ingenuity to solve “impossible” problems in the areas of defense, environment and intelligence. Across our family of companies, we apply bright minds, fresh thinking and relentless determination to deliver innovative products and services that are redefining possible®. When you join our team, you’ll be a part of something truly meaningful — helping to keep America and its allies safe and strong. You’ll collaborate with more than 1,400 engineers, scientists and professionals — with 20 percent of those employees who have served in the military — in a highly innovative, inclusive and equitable work environment. You’ll receive a competitive salary and comprehensive benefits package that includes four or more weeks of paid time off to start, 10 percent employer contribution toward retirement, and 100 percent tuition support. Total compensation for this role is market competitive. The anticipated salary range for this position based out of Syracuse, NY is estimated at $75,000 to $91,000 annually. The actual salary will vary based on applicant’s experience, skills, and abilities, geographic location as well as other business and organizational needs. SRC offers competitive benefit options, for more details please visit our website. #CJ

Job Description Why NYCANNA, LLC, DBA THE BOTANIST? NYCANNA, LLC, DBA THE BOTANIST is a subsidiary of Canopy USA, LLC, a leading vertically integrated, multi-state operator in the United States cannabis industry. With the transition of Acreage Holdings to Canopy USA, LLC in December 2024, Canopy USA, LLC is now positioned to consolidate operations across its three business units – Wana, Jetty, and Acreage – realizing synergies, cost savings, and supporting growth in state-legal markets across the U.S. Through coverage of key market segments including flower via Superflux, vape and concentrates via Jetty, edibles and beverages via Wana, and retail through The Botanist, Canopy USA, LLC is well positioned to accelerate growth with an emphasis on the Midwestern and Northeastern U.S. markets. As newly formed Canopy USA, LLC, we are building a stronger, more agile organization that will unlock greater opportunities across the growing US cannabis market. Who you’ll work for:¨NBSP;NYCANNA, LLC, DBA THE BOTANIST Our Culture: Here at NYCANNA, LLC, DBA THE BOTANIST we believe in people first. We value our people and encourage continuous opportunities to learn, develop, and grow. We pride ourselves in innovation and passion for the cannabis industry. We are always looking for motivated people who share our vision to join our team. Think you have what it takes? Then come grow with us! About the Role: The Facilities Technician (FT) provides the daily care and focused attention necessary to maintain a clean, efficient, and operational environment within the facility. FT will perform inspections, maintenance, and repairs on the cultivation facility and machinery as directed by the on-duty supervisor. FT will provide meaningful feedback to leadership to ensure maintenance is real time, strategic, and executed seamlessly within the operation. FT will interact with vendors and contractors to ensure all jobs leverage the appropriate level of expertise. The position offers a collaborative work environment with a comprehensive benefits package, including medical, dental, vision, 401(k) plan, life insurance, short and long-term disability insurance, paid time off, holidays, pet insurance, and other paid leaves of absence. How you’ll make a difference: Responsible for daily sanitation procedures including bathrooms, hallways, break areas, and anything inside/outside of the facility. Restocks all PPE (Personal Protective Equipment), trash, and restroom supplies throughout the building daily. Perform minor repairs of all buildings and equipment with minimal supervision including but not limited to grow lights, fans, HVAC, plumbing, electrical, etc. Perform major repairs at the direction and under the supervision of the Facilities Manager. Major repairs may include working alongside and coordinating with external contractors or licensed tradesmen. Repairs can include emergency situations and/or scheduled repairs. Responsibly use and/or operate vehicles, tools, materials, parts, maintenance supplies and equipment when necessary and ensure that they are used safely, effectively, and efficiently. Install and maintain new equipment (assembling racks, installing dehumidifiers, etc.) as directed by the Facilities Manager. Troubleshoots minor maintenance issues involving electrical, structural, plumbing, and equipment. Follow maintenance and repair schedules set forth by the Facilities Manager and ensure routine maintenance is performed in a timely and efficient manner. Scheduling maintenance when the scope is outside realm of expertise, but continuously learning from contractors to eliminate the need for outside services when possible. Other duties as assigned; scope of the job may change as necessitated by business demands. Undertake occasional custodial and janitorial tasks (shoveling snow from the sidewalk) Wash the employees’ uniforms in our onsite washer/dryer area and sorts by employee ensuring that employees have clean uniforms for their shift every day. May help in other departments as needed/Other duties as assigned. Administrative Duties: Maintains accurate records of repairs, equipment cleaning, maintenance and calibration and any other facility systems related logs assigned by on-duty supervisor. Promptly reports any system failure, malfunction, or facility damage to the Facilities Manager Assists with the completion of daily, weekly, and monthly checklists on building equipment, and maintenance procedures Must be able to adhere to facility SOPs. Additionally: Assist in the completion of secondary Facilities tasks according to company needs. Follow all aspects of the workplace safety program, biosafety program, and maintain compliance with all rules and regulations. And maintain a clean and safe environment on the production floor. Skills to be Successful: Education and Experience: High school diploma or equivalent experience required. A Bachelor’s Degree preferred. Minimum of 2 years of experience in building and mechanical equipment maintenance and repair preferred. A strong knowledge of trades- plumbing, electrical, carpentry, drywall, tile, miscellaneous repairs and maintenance or an acceptable equivalent combination of education and experience. Knowledge of the marijuana industry strongly preferred or other highly regulated industry. Work history showing flexibility and willingness to accept additional projects or challenges. Key Qualifications Basic Math required for inventory, projections, and measurements Knowledge of use and maintenance of industrial cleaning equipment and appliances Excellent time-management skills; Ability to effectively plan and prioritize Ability to maintain confidentiality; Absolute reliability and honesty Ability to focus; Attention to detail Ability to work effectively as part of a team; Ability to communicate clearly and calmly Ability to remain calm in periods of high stress or unusual activity Skill at using computers Mechanical skill Perks & Benefits: Full suite of medical, dental, and vision insurance Paid parental leave 401 (k) Paid Time Off Short Term and Long-Term Disability Employee Assistance Program Employee life insurance and supplemental life Spouse and child life and AD&D Pet insurance FSA and HSA available *Based on eligibility. Schedule: • Monday-Friday, 8:30am to 5:00pm ET** **Subject to change as business needs. Work Environment and Physical Demands: The work environment characteristics and physical demands described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be requested to enable individuals with disabilities to perform the essential functions. Manufacturing environment that requires extended time standing, walking, bending and reaching. Ability to carry up to 50lbs for up to a distance of 100ft may be required. Occasional extended and repetitive use of arms, hands and fingers to cut and manipulate small objects. Ability to work in a humid and pollinated environment. Extended time standing, walking, bending, and reaching Ability to lift and carry up to 50 pounds for a distance of 100 feet Close visual focus required This position occasionally requires the extended and repetitive use of arms, hands, and fingers to cut and manipulate small objects. Must wear company-provided lab coats, hair/beard nets, gloves, surgical masks and safety glasses/ goggles/ splash shield, while working in the lab. Must adhere to the Syracuse facility general hygiene requirements. E-Verify Participation Notice This Employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. What is E-Verify? E-Verify is an internet-based system that compares information from and employee’s Form I-9, Employment Eligibility Verification, to data from the U.S. Department of Homeland Security and Social Security Administration records to confirm employment eligibility. Code of Conduct: All employees are expected to represent the values and maintain the standards contained in the Code of Conduct. NYCANNA, LLC, DBA THE BOTANIST is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, sexual orientation, disability, or protected Veteran status. We appreciate your interest in NYCANNA, LLC, DBA THE BOTANIST. If you need assistance with completing an online application due to a disability, please send a request to HRTeam@acreageholdings.com. Please be sure to include “Accommodation Request” in the subject line.

Job Description U.S. Water Services Corporation is a well-established and diverse water and wastewater utility organization specializing in utility maintenance, operations, engineering and construction services. Headquartered in New Port Richey, Florida, U.S. Water is rapidly expanding with a staff of over 700 employees in 19 states. U.S. Water's Industrial Group specializes in providing wastewater facility operations & maintenance services for clients in the industrial and private sector. Job SummaryWe currently have an opportunity for an experienced Craftsman Technician. U.S. Water's Industrial Group operates treatment plants for its customers throughout the US. Each customer site is operated by an offsite project manager who works with a dedicated onsite Lead Operator and site operations team. This team is responsible for monitoring processes, adjusting controls, performing laboratory tests, maintaining equipment, replenishing chemicals, and maintaining good housekeeping. As part of the maintenance team, the Craftsman Technician completes a variety of maintenance tasks across our facilities. Primary Responsibilities • Performs scheduled routine preventative maintenance on plant equipment – pumps, blowers, motors. This includes tearing down and rebuilding equipment., • Performs non-routine system upgrades and process improvements. This includes removal of old equipment, installation of new equipment and machinery., • Experience with PVC, HDPE pipework preferred., • Demonstrates good interpersonal skills., • Applies a working knowledge of fundamental principles, terminology, and methodology in carrying out assignments., • Understands and applies standard policies and procedures within specific discipline., • Performs assignments with clear, specific objective which may require the limited exercise of judgment and decision-making skills., • Digs, spreads, and level dirt and gravel using picks, shovel and/or grading equipment., • Lifts and carries building materials, tool & supplies., • Cleans tools, equipment, materials, and work areas, • Performs a variety of tasks involving dexterous use of hands and tools, such as sawing lumber, dismantling forms, removing projections from concrete, mounting pipe hangers and cutting and attaching insulation material., • May operate a variety of the following types of equipment: jackhammer, generator, sand blaster, concrete mixer, grinders, compressors, saws, tampers, pumps etc. NOTE: This Job Description is not inclusive of all job duties. Job Requirements • High school diploma and 5+ years of relevant experience, • Valid driver's license, • Ability to travel 2-3 weeks at a time, • Experience working in an industrial setting, • Applicable Health & Safety training, • Ability to read plans / drawings / specifications and interpret data, • Knowledge of Microsoft Office, • Examples of Physical Requirements:, • Lifting: must be able to lift and carry up to 50lbs, • Standing: Position requires standing for extended periods, with occasional sitting", • Reaching/Climbing: Must be able to reach overhead and climb stairs and ladders, • Environmental Conditions: Must be able to work outdoors in various weather conditionsCompensation and Benefits Pay is commensurate with experience and reflective of market. U.S. Water offers a comprehensive benefits package including medical, dental, vision, life insurance, short/long-term disability, paid time off, holiday pay and 401(k) with company match. U.S. Water offers competitive wages and benefits and is committed to hiring and retaining a diverse workforce. We are an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, national origin, age, veteran status, disability, or any other protected class. Job Posted by ApplicantPro

Job Description IMMEDIATLY HIRING FORKLIFT OPERATOR ROLE PAY $21/50/HR START ASAP! Responsibilities • Operate forklifts and other lift trucks in a constant state of alertness, following all material handling and safety requirements to move, distribute, ship, and receive parts and equipment., • Work safely at elevated heights up to 50 feet while handling materials and performing warehouse tasks., • Maintain a strong safety focus by applying knowledge of sling, hoist, and crane operations when moving materials., • Perform stocking duties to address and resolve complex warehouse or factory capacity issues., • Keep accurate records of all material transactions and conduct audits to ensure overall inventory levels remain correct., • Investigate and reconcile inventory discrepancies and ensure all department records are complete and accurate., • Use a computer and handheld RF scanner to track inventory movements and update system records in real time., • Complete regular cycle counts to maintain and verify inventory accuracy., • Support production system–driven processes and activities by ensuring materials are available and correctly positioned for operations., • Follow written work instructions in English and adhere to all safety and operational procedures., • Handle materials using pallet jacks and other material handling tools as needed. Essential Skills • Ability to operate forklifts and other powered industrial vehicles safely, or willingness to learn and follow training., • Ability to work in a constant state of alertness and maintain a strong focus on safety., • Comfort working at elevated heights up to 50 feet., • Knowledge of or ability to learn sling, hoist, and crane operations to move materials safely., • Ability to use a computer and handheld RF scanner for inventory tracking., • Ability to read and understand English and follow written and verbal work instructions., • Ability to perform physical tasks including stooping, bending, twisting, turning, squatting, reaching, pushing, pulling, grabbing, and grasping., • Ability to safely lift up to 50 pounds on a regular basis., • Attention to detail and accuracy in recordkeeping and inventory control. Additional Skills & Qualifications • Previous experience with powered industrial vehicle (PIV) operation preferred but not required., • Prior manufacturing or warehouse experience preferred., • Experience using RF scanners, pallet jacks, and other material handling equipment is an asset., • Familiarity with inventory control processes such as cycle counting and transaction auditing is beneficial., • Comfort working in a fast-paced, production-oriented environment. Why Work Here? You join a stable, production-focused operation where safety, accuracy, and teamwork are highly valued. The role offers consistent daytime hours, allowing for predictable work-life balance during the week. You gain hands-on experience with modern material handling equipment and inventory systems, building skills that are highly transferable across logistics, manufacturing, and warehouse environments. You work alongside a supportive team that relies on clear processes and established production systems, giving you the structure and tools needed to succeed. Work Environment This position is based in a warehouse and production environment that uses modern material handling equipment, including forklifts, pallet jacks, RF scanners, and computer-based inventory systems. You will work on the 1st shift, Monday through Friday, from 6:00 a.m. to 2:30 p.m. The role involves working around powered industrial vehicles, stored materials at various heights, and active production areas. The environment requires frequent physical activity such as lifting up to 50 pounds, bending, twisting, and working at elevated heights up to 50 feet. You should expect to wear appropriate work attire and any required personal protective equipment suitable for a warehouse and material handling setting. Job Type & Location This is a Contract to Hire position based out of East Syracuse, NY. Pay and Benefits The pay range for this position is $21.50 - $21.50/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in East Syracuse,NY. Application Deadline This position is anticipated to close on Oct 8, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionJob Description The work involves responsibility for monitoring the condition of the water system through the control center of the City of Syracuse Water Department, providing informational services to the public regarding the services and operations of the Department of Water, other City departments and outside agencies, as well as operating a central two-way radio system to monitor and send messages to work crews in the field involved in construction, maintenance and/or repair projects. Employees in this class must exercise independent judgment to react quickly and accurately to dangerous and/or emergency situations. Assignments are received orally and in writing from an administrative superior. Routine clerical work is required in keeping a daily log of work activities. Does related work as required. Typical Work Activities • Monitors all equipment and alarms in the control center., • Reports failures, damage or misuse of equipment or alarms to superiors., • Operates the control center phone system., • Reads and records, as directed, data from the water system monitoring equipment., • Operates equipment at the plant or remotely to make necessary changes to the water system., • Reports indications of major system problems and subsequent actions taken to superiors., • Relays information such as location and possible problems to appropriate staff and contacts the appropriate departments, during off hours, to correct emergency situations., • Transmits messages and orders by radio, phone or computer between the various units working in the field of construction, maintenance and/or repair projects., • Receives radio reports of location from motor equipment; tells motor equipment operator the official time of each report; records all communications on a simple radio log by posting unit number, time of transmission and location of unit., • Informs motor equipment operators of location of next work assignment at the request of superiors; may send equipment to an emergency work site following a detailed standard operating procedure which indicates which type of vehicle to send to what type of job and/or which geographical sectors are covered by each vehicle., • Answers telephone; records public complaints, name, address, and type of problem and records information into computers and/or file cards., • Monitors security cameras at various City locations., • May use a data entry terminal or personal computer for filing or obtaining information.Knowledge, Skills, and Abilities, • Good knowledge of City department's operations, personnel, equipment and location of buildings., • Good knowledge of the geography of the local road network., • Ability to react quickly and calmly in emergencies., • Ability to maintain a variety of simple logs and lists., • Ability to interpret maps and computer graphics., • Ability to transmit messages with good diction and a clear speaking voice.Minimum Qualifications Promotional: • Two (2) years of permanent non-competitive class status in the title of Motor Equipment Dispatcher. Open Competitive: • A) One (1) year of full-time work experience, or its part-time equivalent, in the operation and/or maintenance of a municipal water or wastewater system; or, • B) One (1) year of full-time work experience, or its part-time equivalent, in dispatching work crews or emergency personnel; or, • C) Graduation from a regionally accredited or New York State registered college or university with an Associate's degree in Electronic Media Communications, Computer Science or a closely related field; or, • D) Two (2) years of full-time work experience, or its part-time equivalent, in the operation and/or maintenance of computers.Benefits, • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Vision insurance, • Retirement plan The Affirmative Action Policy of the City of Syracuse is to provide equal employment opportunity for all individuals regardless of race, color, sex, religion, creed, age (18 and over), marital status, national origin, disability, veteran status, gender identity or gender expression, sexual or affectional preference or orientation, or any other classified group within the protected class. The City also complies with 31 CFR part 51. If you have a disability for which you wish special accommodation to be made, contact the Office of Human Resources at 315-448-8780 or personnel@syr.gov. All offers of employment will be contingent on the successful completion of a background check and/or drug screen. Job Posted by ApplicantPro

Job Description ABOUT THE COMPANY Playa Bowls is New Jersey's Original Acai Shop, and our mission is to bring superfruit bowls to the masses using only the freshest, highest quality ingredients while providing a fantastic in-store brand experience. What began as a pair of blenders, a patio table, and a fridge has flourished into a 300+ unit operator and franchisor of the leading fast casual restaurant concept. Playa Bowls added more than 70+ locations in 2024 and are on target to add as many 90 new locations in 2025. Our continued rapid growth has created the opportunity for an individual who will help us with continuing to grow our brand! WHAT WE OFFER • Competitive Pay + Tips: Enjoy a competitive hourly wage along with both credit card and cash tips — your hard work pays off!, • Professional Development: Our comprehensive Playa Bowls training program helps you build valuable skills that will benefit you in any career path., • Vibrant Work Culture: We keep energy high with a fun, upbeat environment where dancing, smiling, and having a good time are part of the job., • Employee Discounts: While on shift, enjoy 50% off and one free bowl. When you're off the clock, you still receive 30% off — it's a win-win! WHO YOU ARE As a Team Member, you’re a positive and enthusiastic people-person, who may just so happen to have a passion for fruit, superfoods, and all things healthy! You will be responsible for helping new customers pick a superfood for them and using your own personal skills to create them. This is done while ensuring guest satisfaction takes priority, food quality and company standards are met. If you enjoy fast-paced environments, career growth, entrepreneurial thinking, innovation, and an occasional silly food pun, we want you! WHAT YOU’LL DO • Maintain cleanliness and organization throughout the restaurant, • Manage time effectively and meet all job responsibilities, • Maintain a positive work environment for guests and staff, • Check products to ensure consistency, palatability, and flavor conformity, • Perform food preparation or service tasks, • Utilize point of sale cash register system, • Addressing any questions or comments that customers may have, • Take customer orders and assemble the orders, • Replenish supplies and condiments and maintain inventory, • Notify supervisor of any food orders or food shortages, • Lives the Playa Bowls mission, purpose, and values WHAT YOU’LL BRING • Committed to delivering exceptional customer service by providing friendly, attentive service and ensuring satisfaction with every guest interaction., • Proven ability to remain flexible in a fast-paced dynamic environment, quickly adjusting to changing priorities and customers’ needs to maintain seamless operations., • Collaboratives effectively with team, fostering a positive and productive work environment, • Skilled at prioritizing tasks to meet customer demands during peak hours, • Ability to handle customer concerns or operational challenges with assistance from management calmly and effectively, • Ensuring accurate orders and maintaining food presentation standards ESSENTIAL PHYSICAL FUNCTIONS • Must be able to remain in a stationary position for prolonged periods of time, • Must be able to lift or otherwise move 25-40 pounds occasionally, • Must be able to retrieve items from high and low shelving, the fridge/freezer, and under counters, • Must be able to tolerate occasionally loud environments (high powered blenders, timers, and order notifications)., • Ability to frequently move about inside the establishment to access the Point-of-Sale cash register, assemble guest orders, clear tables, restock inventory, etc. MISSION Inspire and support our communities one bowl at a time. VALUES Real Deal. Playa Passion. Powerhouse. Big Wave Chaser. Dawn Patrol ADDITIONAL INFORMATION “Playa Bowls is an equal opportunity employer committed to inclusivity and diversity in our workplace and all aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.”

Job Description We are currently hiring multiple Communications Operator/Greeters to join our growing team! This position is per diem. Current need is for Sundays 2:30 PM - 10:30 PM and as needed including weekend and holiday coverage. Responsibilities: This position operates the switchboard, paging system, and provides information, directions, and/or assistance to the general public, residents and staff while maintaining a pleasant and courteous attitude. This position acts as a receptionist for the facility and performs a variety of general office functions. Previous telephone and receptionist experience is desirable for this role. Qualifications: • Candidate must possess a high school diploma or equivalent, • Strong verbal and interpersonal skills required, • Previous switchboard experience is desirable, but not required Employee Benefits: • No Mandated Shifts, • Daily Pay, • Generous PTO Structure for Full Time employees, • Health/Health Reimbursement Account/Dental/Vision Plans available, • Company Provided Life Insurance for Full Time employees, • Retirement Plans, • Tuition Reimbursement, • On the Centro Bus Line, • Free parking Why work at St. Camillus? Our Mission: St. Camillus is a non-denominational, not-for-profit organization dedicated to caring for life through a broad range of health care services. Our Vision: To be the provider of choice for compassionate and innovative care. If you are interested in joining a team of professionals who are committed to providing high quality services in a caring environment, we want to hear from you! To learn more information about St. Camillus, visit our website at: http://www.st-camillus.org EOE/Affirmative Action Employer

Job DescriptionDescription: PenBay is looking for motivated, computer-savvy individuals to work as Remote Pilot Operators. No aviation experience is required, but helpful. Experience as a computer operator, RPO, air traffic control specialist, or (student) pilot is highly desirable. Candidates that have completed aviation studies coursework, are certified in the terminal radar lab or en route lab, or otherwise possess a working knowledge of the FAAO JO 7110.65 are preferred. Position Summary: The Remote Pilot Operator (RPO) operates a combination of Cathode Ray Tube (CRT)/keyboard/Voice Communication System (VCS) to simulate the actions and communication of pilots and remote ATC facilities during medium and high-fidelity training exercises. RPOs receive voice commands from students, input proper entries into the automated system to simulate pilot actions, translate displayed information into appropriate ATC terminology, and respond to the student via the VCS utilizing proper phraseology. PLEASE NOTE: This is NOT a UAS / UAV / RPV Pilot / Operator position This is a Part-time position Requirements: Qualifications: High school diploma or equivalent and at least one (1) year of experience in a comparable position. Demonstrated minimum keyboard speed of forty (40) wpm with ninety (90) percent accuracy rate Ability to read and interpret materials such as diagrams and manuals Ability to speak clearly and be understood Proficiency with MS Office Suite (Word, Excel, etc), desirable Basic familiarization of current technologic tools (tablets, notebooks, applications, etc.) a plus Experience working in a multidisciplinary team, preferred Candidates will be subject to FAA security screening Competencies and Skills: RPO must be laboratory certified within the first 120 days calendar days of reporting for duty at the facility. Exceptional customer service orientation Ability to work productively with a wide range of people and co-workers Effective oral and written communication skills Effective team building skills Certification Requirements: Each new RPO shall complete knowledge and skills tests for each area/sector to be supported. Each knowledge test will be graded and must be passed with a score of at least 70%. Upon successful completion of the knowledge tests, the RPO will begin training for the skills tests. The RPO shall observe a previously certified RPO, an FAA employee, or Contractor instructor performing RPO duties on a minimum of five (5) simulation scenarios. The RPO will receive on the job training on at least five (5) but no more than twenty (20) simulation scenarios on each control position to be supported, after which an FAA representative will observe their performance and determine if certification will be granted. The RPO shall achieve simulation laboratory certification within one hundred twenty (120) days of reporting for duty at the facility.

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. Job Summary Responsible for the operation, monitoring, maintenance, and regulatory compliance of the wastewater treatment system supporting dairy manufacturing operations. Ensures all wastewater treatment processes are operated safely, efficiently, and in compliance with environmental permits and regulatory requirements. Supports plant sustainability initiatives through effective wastewater management, process optimization, and environmental stewardship while maintaining accurate operational records and promoting a safe work environment. Key Responsibilities • Operate, monitor, and maintain wastewater treatment equipment including dissolved air flotation (DAF) systems, equalization tanks, pumps, mixers, chemical feed systems, sludge handling equipment, and associated utilities., • Monitor wastewater treatment processes to ensure compliance with discharge permits, environmental regulations, and facility operating requirements., • Adjust chemical feed systems and treatment parameters to optimize wastewater treatment performance and system efficiency., • Collect wastewater samples and perform routine testing including pH, solids, COD, BOD, and other required process monitoring activities., • Maintain accurate operational records, laboratory results, compliance documentation, and regulatory reporting requirements., • Inspect, troubleshoot, and perform routine maintenance on pumps, blowers, mixers, valves, chemical systems, and wastewater treatment equipment., • Coordinate maintenance and repair activities with Engineering, Maintenance, and external service providers as needed., • Operate sludge dewatering equipment and coordinate sludge handling, storage, and disposal activities in accordance with regulatory requirements., • Monitor wastewater system performance, identify process variances, and implement corrective actions as necessary., • Support water conservation, waste reduction, and continuous improvement initiatives to improve environmental performance and operational efficiency., • Maintain compliance with all applicable environmental regulations, permits, company policies, and wastewater operating procedures., • Safely handle treatment chemicals and maintain proper chemical storage, inventory, and usage practices., • Follow all safety requirements including Lockout/Tagout procedures, confined space requirements, personal protective equipment (PPE), and facility safety programs., • Assist with environmental audits, inspections, permit renewals, and regulatory reporting activities., • Maintain housekeeping and cleanliness standards within wastewater treatment and utility areas., • Perform additional duties as assigned. Qualifications Education • High School Diploma or equivalent required., • Associate degree or technical training in Environmental Science, Wastewater Operations, Industrial Technology, Mechanical Technology, or related field preferred. Experience • Minimum 1–3 years of wastewater treatment, industrial utilities, manufacturing, environmental operations, or related experience preferred., • Experience operating wastewater treatment systems, DAF systems, chemical treatment processes, or industrial utility systems preferred., • Experience working in food manufacturing, dairy processing, or regulated industrial environments preferred., • Wastewater Operator Certification or ability to obtain certification preferred. Skills • Working knowledge of wastewater treatment processes and environmental compliance requirements., • Strong mechanical aptitude and equipment troubleshooting skills., • Ability to collect samples and perform basic laboratory testing and analysis., • Ability to read gauges, meters, instrumentation, and process control data., • Strong organizational skills with attention to detail and accurate recordkeeping., • Basic computer proficiency including Microsoft Office applications., • Ability to work independently and effectively manage assigned responsibilities. Competencies • Strong commitment to environmental compliance, safety, and operational excellence., • Ability to identify operational issues and implement effective solutions., • Strong problem-solving and critical-thinking skills., • Ability to manage multiple priorities in a manufacturing environment., • Commitment to continuous improvement and resource conservation., • Strong accountability and attention to detail., • Ability to work collaboratively across departments and communicate effectively with internal and external stakeholders. Working Conditions (Physical Demands) • Ability to stand, walk, bend, kneel, crouch, climb, reach, and perform repetitive motions throughout the shift., • Ability to frequently lift, carry, push, and pull up to 50 pounds and occasionally move heavier materials with assistance., • Ability to work indoors and outdoors in varying weather and environmental conditions., • Exposure to wastewater treatment systems, treatment chemicals, industrial equipment, noise, moisture, and variable temperatures., • Ability to work in confined spaces, elevated work areas, and around moving mechanical equipment as required., • Ability to wear required Personal Protective Equipment (PPE) and comply with all safety requirements., • Ability to respond to operational issues outside normal working hours as needed., • Ability to work flexible schedules, including overtime, weekends, holidays, and emergency coverage as operational needs require. Pay: $26.00-$33.00 per hour* • The salary range listed for this position represents the good faith and reasonable minimum and maximum pay for this role at the time of posting. Actual compensation may vary based on factors including, but not limited to, experience, skills, training, knowledge, education, and overall qualifications. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Job Description The work involves responsibility for opening and closing valves of different size, type and use in a municipal water system. This is repetitive manual labor involving responsibility in locating water valves, exposing and removing valve box covers, accessing valves and operating the valves as needed. The position requires considerable responsibility and independent judgment in the selection and operation of the valves, especially in emergency situations, and requires emergency responses to system breaks and leaks to make corrections to keep overall damage to a minimum. Employees in this class operate under the direction of the Principal Emergency Valve Operator. Department managers provide additional training and supervision as required. Does related work as required. Typical Work Activities • Locates valves in the water system., • Excavates, opens and cleans valve boxes, vaults and bilco doors in order to access the valves., • Inspects vehicle to verify that the proper equipment needed to perform the work has been loaded., • Investigates and locates water leaks and breaks using proper equipment provided., • Investigates water complaints and/or frozen services., • Marks out water lines in response to requests from outside agencies., • Opens and runs hydrants to clear mains and/or flush system as directed., • Operates valves to shut off and turn on water., • Raises valve boxes to required grade., • Removes broken meters and installs temporary hook-ups., • Reports problems, damage or loss of equipment to superiors., • Verifies all air relief equipment is open and operating., • Maintains shift logs and other reports as required., • Drives emergency truck when assigned.Knowledge, Skills, and Abilities, • Good knowledge of the safety precautions and proper use of the department's equipment assigned to the valve operation., • Good knowledge of the practices, tools and terminology used in water distribution system repair and maintenance., • Good knowledge of the order in which valves need to be operated in an emergency., • Good knowledge of the location and function of the water supply valve system., • Good knowledge of the geography of the local road network that covers the department's conduits and water lines., • Ability to lead a group of subordinate employees., • Ability to work calmly in emergency situations., • Ability to understand and carry out written and oral instructions., • Ability to read and use the department's various maps and files to locate valves., • Ability to prioritize emergency repair work., • Ability to do heavy labor work., • Ability to communicate clearly., • Ability to act in a courteous and effective manner with the public.Minimum Qualifications, • A) One (1) year of full-time work experience, or its part-time equivalent, in the maintenance of a municipal water supply system that involved activities such as hydrant repair, pipeline repair, valve operation and/or repair; OR,, • B) Five (5) years of full-time work experience, or its part-time equivalent, as a plumber servicing a water supply system.Special Necessary Requirement Possession of a valid New York State Non-CDL or CDL, including any special endorsements required for the type of vehicle being operated. Benefits • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Vision insurance, • Retirement plan The Affirmative Action Policy of the City of Syracuse is to provide equal employment opportunity for all individuals regardless of race, color, sex, religion, creed, age (18 and over), marital status, national origin, disability, veteran status, gender identity or gender expression, sexual or affectional preference or orientation, or any other classified group within the protected class. The City also complies with 31 CFR part 51. If you have a disability for which you wish special accommodation to be made, contact the Office of Human Resources at 315-448-8780 or personnel@syr.gov. All offers of employment will be contingent on the successful completion of a background check and/or drug screen. Job Posted by ApplicantPro