Trabajos theory en Rochester, New YorkCrear alertas

Job Description Job Description Summary The Lead Electrician Operates, maintains and repairs distribution and emergency power systems. Installs, maintains and repair electrical wiring and switch distribution panels and outlet boxes. Perform conduit installation, wiring and equipment. Job Description Essential Functions • Provide a high level of expertise in maintaining the facilities critical electrical equipment. (I.e. emergency generator, high and low voltage panel board networking systems)., • Analyze project electrical needs and determine design., • Maintain hand and power tools in working order., • Carry out preventative maintenance program on a wide variety of complex electrical equipment., • Layout and install power circuits in operational sequence, and make all required electrical calculations, such as kilowatt draw and power circuit phase., • Maintain automatic controls, switchboard distribution centers, lighting circuits and flood lights., • Troubleshoot, tear down, disassemble, rewire, adjust, repair and replace electrical apparatus., • Make standard computation relation to load requirements of wiring and electrical equipment., • Respond to all types of electric emergencies., • Detect and report improper operation, faulty equipment, and unusual conditions., • Maintain work area in a clean and safe condition. Comply with CWS and OSHA Policies and Regulations., • Perform other duties as required., • Ensures assigned work tasks meet quality standards., • Promotes the development of quality improvements through the initiation of process improvements. Requirements • High School / Technical School Diploma / Military Trained Electrician, • Electrician License from local jurisdiction, • Must be well versed in the electrical codes and theory, • Minimum of five years working as an electrician, • Computer aptitude working with CMMS and BMS computerized systems, • Ability to read schematics, job instructions, and general correspondence, • Candidates must be able to successfully pass a background check, including criminal history., • C&W Services is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, sexual orientation, gender identity, protected veteran status or any other characteristic protected by law. This list is representative of those duties and responsibilities that are required of this position. However, the list is not to be considered as all inclusive. A supervisor or manager may assign other duties to meet mission requirements of CW Services and cooperation of all personnel is expected to carry out the mission. REQUIRED PHYSICAL ABILITIES Electrical work by its nature requires physical abilities to include lifting up to 50 lbs regularly. Full dexterity is required including bending, kneeling, twisting, fine motor skills with hands and fingers, full rotation of the head and neck. Ability to see, hear and be alert while operating equipment. Ability to operate lift equipment at heights of up to 45 feet and perform work safely utilizing extension and step ladders. Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $31.00- $36.00 hourly \nCompany Description We manage all aspects of facility services for a client. We manage all aspects of facility services for a client.

Job DescriptionDescription: The health services that became the Anthony L Jordan Health Corporation (Jordan Health) began more than 100 years ago, in 1904. As one of the first 5 Federally Qualified Health Centers (FQHC) established in the nation, its roots are steeped in service to those who face barriers to health and health care, meeting their need for comprehensive medical, dentistry, behavioral health, and community services. Starting in northeast Rochester, NY, Jordan Health has since expanded to become a network of primary care offices and health centers serving residents living in three quadrants of Rochester, NY and in Canandaigua, N.Y. Jordan Health is now seeking a Health Educator who, under the guidance of the Practice Manager, is primarily responsible for providing information on healthy lifestyles, STI prevention, HIV Prevention, safe dating practices, domestic violence/sexual assault, sexuality, human trafficking, Contraception, and other issues as they pertain to the age group served, ages 12 to 25 in both the Parsells location and at the SNHC at Franklin. If you want to apply your specialized experience and education in an environment where you can make a difference and significantly impact patients’ quality of life, please consider our Health Educator. Requirements Requirements: The Health Educator will ensure to: · Plan, develop, implement and update health and community outreach programs. · Conduct community outreach in order to build client numbers and promote health education. · Complete the annual CPEP Health Education report and coordinating quarterly information and education committee meetings. · Collaborate with others to accomplish grant goals, such as Comprehensive Pregnancy Prevention Program or similar organizations or groups. · Provide direct counseling services to clients in the area of contraception, HIV, STDs, problem pregnancy, sexuality, sexual assault, substance abuse, and other health related issues by referral from providers. Education And Experience Required: · Bachelor’s degree or prior experience conducting health education and outreach · Facilitation skills · Content-specific knowledge related to family planning and sexual and reproductive health · Public speaking skills · Program evaluation knowledge · Counseling skills including motivational interviewing skills · Ability to conduct a basic needs assessment · Understanding of program theory · Critical thinking skills Licenses And Certifications: · None required but CASAC certification preferred. · BLS through the American Heart Association · NYS Infection Control certificate Special Skills, Knowledge Required: · Must possess a broad background in health education with assessment and counseling skills pertinent to adolescent needs and developmental tasks. · Must have the ability to work with adolescents individually and in group and family sessions. · Should have a broad background in family planning methodology and the ability to provide effective and accurate presentations to adolescents and the community at large. · Must possess the ability to initiate and maintain effective community linkages. · An in-depth understanding of HIV and STI information is required. Benefits: Jordan Health offers a competitive salary and full benefits offering including medical, dental, vision, life insurance, and 403b retirement plan. We offer Professional Development allowance. Jordan Health offers equal opportunities to all persons without regard to race, color religion, age, sex, disability, national origin, ancestry, citizenship, military or veteran status, marital status, sexual orientation, domestic violence victim status, predisposing genetic characteristics or genetic information, or any other status protected by law. About Jordan Health: Jordan Health is an independent FQHC, with Level III Patient-Centered Medical Home (PCMH) designation through the National Committee on Quality Assurance. Jordan Health receives funding from the Health Resources and Services Administration (HRSA) of the U.S. Department of Health and Human Services. Jordan Health is a network of outpatient primary care offices with providers who follow a panel of patients. While independent, Jordan Health actively collaborates with the major hospital and healthcare systems in our operating area to provide a total safety net of healthcare services.

Job Description Center for Youth: Started BY YOUTH FOR YOUTH. We partner with youth to realize their full potential, by creating opportunities, removing barriers and promoting social justice. The Center ensures understanding and values differences in people of diverse cultures, ethnic origins, sexual orientation, disabilities and beliefs. Overview: The Workforce Recruitment and Retention program helps young people find meaningful employment opportunities and retain their jobs. The main goal of the Navigator is to seek and secure higher-level positions and new opportunities for youth, especially those over 16 years old. This position will actively recruit potential participants, assess their skills and needs, and help them establish academic and employment plans and goals. They will also provide job-readiness information and support, maintain appropriate records and data collection, and identify quality businesses to offer internship and employment opportunities for youth. Schedule: Full time, 35 hours per week. Monday- Friday 9am-4:30pm Responsibilities: • Promoting the project, • Recruiting participants, • Screening and qualifying applicants, • Utilize evidence-based, ongoing assessment processes for individuals entering the program with well-defined expectations for participation., • Provide robust workforce readiness training for both hard (technical/vocational) and soft skills., • Develop strong and effective partnerships with employers to understand their needs and align training/resources to prepare individuals to meet those needs, • Educate employers about incentives, the benefits of hiring individuals from poverty and diverse backgrounds, and how to best engage the community, • Conduct post-placement follow-up and retention support for both individuals and employers, • Deliver intentional job matching services, which recognize individuals' interests and potential, leading to placement in jobs with living wages, comprehensive benefits, and room for growth., • Assisting with the Development and Maintenance of a Job Readiness Training, • Meeting with participants frequently to:, • Assess and review needs, • Assist in subsidized and non-subsidized employment obtainment, • Review and support academic and employment goals, • Provide service referrals and linkages, as appropriate, • Maintaining contact with and providing ongoing information to participants' support systems (i.e. parents, school, referral source), • Providing transportation to participants for program events and activities, as needed Required Qualifications: • Bachelors Degree in Human Services OR Equivalent combination of experience and education, • Knowledge of youth asset development and risk reduction theory, and youth serving systems, community resources, partnerships and collaborations, • A valid Driver's license Skills: • Excellent verbal and written communication, • Excellent training, presentation and teaching skills, • Basic knowledge of Microsoft Office Pay Rate: $22- $24.75 per hour The Center for Youth Provides Equal Employment Opportunities

Job Description Mersen is a global expert in electrical specialties and advanced materials for high-tech industries. Present in 32 countries with 50 industrial sites and 24 R&D centres, Mersen develops custom solutions and supplies key products to meet the new technological challenges that will shape tomorrow's world. For more than 130 years, Mersen has been constantly innovating to support and satisfy its customers' needs with the same high standards. Be it in wind power, solar power, electronics, electric vehicles, aeronautics, space or countless other sectors, wherever technology is progressing, you will always find a bit of Mersen. Main missions The Process Technician shall be the liaison between Engineering and Manufacturing, ensuring new products are successfully transitioned from design to manufacture in a way that optimizes quality and efficiency. In addition, the Process Engineer will improve existing product designs and current production methods. In conjunction with the Manufacturing Manager, the Process Engineer is responsible for the overall performance of the operation including quality, delivery, cost, and safety. A strong focus is to be placed on improving product quality and production efficiency to drive down cost. Main duties • Act as the liaison between manufacturing and engineering regarding manufacturing methods, materials, and problem resolution, • Develop manufacturing process with the goal of error proofing assembly process to drive down scrap and rework, • Drive improvement to manufacturing methods, part routings, bills of material, and material utilization to increase overall manufacturing efficiency, • Develop detailed Work Instructions to aid in complex assembly steps, • Support fabrication and assembly operators with technical issues escalating to engineering if required., • Participate fully with the engineering and operations teams to develop and execute solutions to product design and process problems, • As needed, create additional, detailed assembly drawings to minimize the likelihood of errors, • Participate fully in the change request process, • Support and help drive safety improvements across the manufacturing areas, • Actively participate in product design reviews, • Support and help implement Lean improvements across the manufacturing areas, • Train operators as needed on new methods and processes, • Support other company departments and customers as required Requested Knowledge, Competencies and Abilities: • Associates degree or equivalent experience, • Must have solid problem solving, decision making, and communication skills, • Self-motivated, • Highly organized, • Good team player, • Demonstrated leadership skills, • Understanding of drafting standards, geometric tolerances, and interpretations to various standards, • Understand process control, capabilities, and various methods of manufacturing preferred, • Understand CNC machine shop practices, processes, tooling and theory of machining preferred, • Must have a valid driver’s license, • Must be a US citizen and willing to work on military products Compensation Data Salary Range: $25.00 / hr - $35.00 / hr All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. The job titles do not mean the male variant but stand for the gender-neutral designation of the profession according to wikipedia. People are welcome regardless of gender, origin, sexual orientation, and religion.

Job Description Blossom Healthcare Center provides a range of accommodations that go above and beyond your expectations. Our soft linens and cozy furnishings are just a small part of what makes our unique all-inclusive health facilities a preferred destination for high quality healthcare. Blossom Healthcare Center is currently seeking an Assistant Director of Nursing. RN Duties Include: Management responsibilities including maintaining exceptional quality of care. Assist with compliance and ensure effective communication with all levels of nursing staff. Serve the nursing needs of all residents in the facility. Assist in creating and directing care plans for nursing services. Maintain and disseminate knowledge of general nursing theory and practice. Responsible for the accurate and timely completion of medical records. Assist with interviewing, hiring and orienting of new nursing staff. Maintain flexibility with work schedule to address unpredictable needs. Assist Director of Nursing with daily responsibilities. RN Requirements: Current New York State RN license required. Minimum three years’ experience in Long-Term Care settings. Staff training with clinical staff. Excellent Communication Skills required. Evidence of advanced leadership skills and supervision. We offer the Following: same day pay available Competitive Compensation. Great Benefits Package. Professional Growth & Stability. Innovative Training Programs And much more! We are an Equal Opportunity Employer –M/F/D/V

Job Description Greenlight Networks is searching for a dynamic and experienced Director of Accounting to add to our high performing team. We are embarking on an aggressive consolidation and growth phase via announced acquisitions and mergers (Fast Bridge Fiber, GoNetSpeed, and T-Mobile) and are looking for a strategic leader to help drive planning, forecasting, and providing financial insights to support this consolidation. This leader will be a key member of the accounting organization, partnering closely with the VP, Controller to oversee the company's accounting operations, financial reporting, compliance activities, and internal controls. This role will help ensure the integrity of financial information while supporting a scalable finance infrastructure capable of supporting rapid growth, acquisition integration, and private equity reporting requirements. We encourage applications from qualified candidates across the Eastern United States, including markets extending from the Northeast through the Southeast. The position is not restricted to specific states or locations. The ideal candidate is a hands-on accounting leader with strong technical accounting expertise, experience operating in a fast-paced environment, and a proven ability to drive accurate and timely financial reporting. This individual will serve as a trusted partner and collaborate closely with leadership, ownership groups, lenders, auditors, and cross-functional business teams. This position offers a significant opportunity to contribute to the company's continued growth and value creation initiatives. Key Responsibilities • Support the CFO, VP Finance/Controller in managing the monthly, quarterly, and annual financial close processes, ensuring timely and accurate financial reporting., • Oversee day-to-day accounting operations, including general ledger activities, account reconciliations, and financial statement preparation., • Prepare and review consolidated financial statements and supporting schedules, • Assist in the preparation of reporting packages, • Ensure compliance with established accounting policies, procedures, and internal controls, • Identify opportunities to improve accounting processes, workflows, and reporting efficiency across the organization, • Support the continued development of a scalable accounting infrastructure to meet the needs of a growing business, • Partner with external advisors and auditors on complex accounting transactions and reporting requirements, • Maintain accounting policies and procedures to support evolving business needs and regulatory requirements, • Support the annual financial statement audit and serve as a primary liaison with external auditors, • Coordinate audit requests, testing, documentation, and issue resolution., • Assist in maintaining a strong internal control environment and implementing process improvements, • Support lender reporting requirements and compliance activitie, • Help mentor, develop, and support members of the accounting team Knowledge Skills and Abilities: • Proven cross-functional collaboration experience as position requires frequent interactions with Accounting, Treasury, FP&A, and Business Operations teams, • In-depth knowledge of financial reporting systems including A/P, A/R, G/L and payroll., • Ability to deliver high quality work product while meeting deadlines, • Strong desire to be on a high growth, winning team, working with passionate, purposeful people; naturally curious, • Prior accounting experience with mergers & acquisitions, • Excellent verbal and written communication skills across all levels of an organization, • Self-starter and finisher; proven experience taking significant initiative, • Work independently with appropriate allocation of time management and organization, • Proven orientation towards detail coupled with an extremely high ability to self-check own work and attention to accuracy; innate big picture sensibility when required, • Ability to iterate, think independently, confidently suggest and implement change to improve timing, processes, outcomes, • Strong interpersonal skillset with an ability to support and interact with executive management and investors, • Highest ethical and professional conduct, • Excellent communication, analytical, and problem-solving skills, • Ability to travel to various states on the east coast , travel <10% Education and Experience • Required minimum of 7 years experience in progressive accounting roles; must include management and external reporting experience, • Active CPA designation. Big 4 public accounting experience required, • Advanced proficiency in Excel, • Proven ability to work in a fast-paced, dynamic environment, while managing multiple priorities, • Proven background in business case theory and practical experience Previous PE experience in a high growth industry a plus Compensation: Our job titles may span more than one career level. The salary for this position is between $130k - $160k. The actual salary offered may be influenced by a variety of factors, such as: training, transferable skills, work experience, education, business needs, market demands and work location. The base pay range is subject to change and may be modified in the future. More information on offered benefits, which include health, welfare, and retirement, are available at www.greenlightnetworks.com/careers/.

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 60 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Controls Engineer Technician Primary Function: The Controls Engineer Tech is responsible for machine control startup, debugging, calibration, and verification on newly assembled or manufactured machines. Essential Functions: Tests newly manufactured and assembled equipment according to each customer's established test procedure. Uses specialized measuring, diagnostic devices, and software to evaluate functionality and proper sequence of machine control systems. Handles machine control startup, debugging, calibration, and verification Notify appropriate management of recurring issues with equipment and/or operation of equipment when necessary. Assist with other duties as assigned by the Manager. Reports To: Technical Manager Qualifications: Required • Associates degree in Electrical Engineering Technology or similar, or at least 2 years experience working as an electrical technician., • Knowledge of electrical theory and practices, including testing sensors, switches, actuators, and indicators for proper function., • Computer hardware maintenance methods, techniques, and network connection., • Basic understanding of NEC standards and state codes., • Ability to read and understand electrical schematics and annotated PLC programs., • Manual Dexterity: working with wires, using hand tools and handling small components. Preferred Previous controls engineering tech experience in a contract manufacturing environment Work Authorization: US Persons PEKO Perks: Competitive Total Rewards Tuition Reimbursement (IRS Allowable pre-tax Max) 401K, Medical, Dental, Vision Flexible Spending & Health Savings Accounts Life, Short and Long-Term Disability Recognition Awards & Discretionary Benefits Our Core Values: Compassion: We care about our talented and loyal PEKO family. Safety: We are committed to providing a safe, clean, and positive workplace. Integrity: We believe in transparency, honesty, and respect for all stakeholders. Agility: We are dedicated to maintaining an agile and financially prudent organization. Endurance: We foster the belief that PEKO people are resilient problem-solvers impacting the future. Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice. For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $21.00 - $30.00 per hour. The wage range for this role considers a wide range of factors when making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR ktZyQpOUmQ

Job Description Melissa Owens | President E: melissa@alliedsearchpartners.com Job Description Job ID: 2963088 Job Title: Medical Technologist - Permanent Position Location: Rochester, NY Area Schedules: 11pm to 7am, 5 per week with potential for 3X12s or 4X10s Benefits: • Flexible scheduling that works around your personal and school schedule., • Competitive wages, with superior pension and retirement plans with employer contributions., • Shift differential for working evening and night shifts., • Vacation, holiday and sick leave package., • Tuition assistance to provide opportunities for career growth., • Dental, vision and no-cost life insurance., • Free parking. Job Responsibilities: • The Medical Technologist performs laboratory tests accurately and efficiently following standard operating procedures., • The Medical Technologist operates laboratory equipment while understanding the principles and the theory behind the method., • The Medical Technologist perform precise specimen analysis and report results accurately, following established procedures; recognize deviation from expected results, analyze and correct problems using scientific principles; complete QC Action Logs, preventative maintenance logs and pending lists daily., • The Med Tech is involved in training & development, by assisting with the training of new personnel on responsibilities in the laboratory; evaluate progress of training; make recommendations for training methods., • The Med Tech continuously assesses work processes and makes suggestions for improved work methods and ways to increase efficiency, reduce costs and solve operational problems. Requirements: Education - Bachelor’s Degree in Medical Technology or a Science studies Experience - At least 3 years of generalist experience License/Certificate - A valid NYS License for Clinical Laboratory Technologist. American Society for Clinical Pathology Medical Technologist (ASCP MT) certification preferred

Job DescriptionAbout us: Aeva’s mission is to bring the next wave of perception to a broad range of applications from automated driving to industrial robotics, consumer electronics, consumer health, security, and beyond. Aeva is transforming autonomy with its groundbreaking sensing and perception technology that integrates all key LiDAR components onto a silicon photonics chip in a compact module. Aeva 4D LiDAR sensors uniquely detect instant velocity in addition to 3D position, allowing autonomous devices like vehicles and robots to make more intelligent and safe decisions. Role Overview: Aeva is seeking to hire a talented and motivated Sr/Staff Hardware Engineer to join our EE HW team. The EE HW team owns the design, build and bring up of Aeva’s mixed-signal PCBs. As a Hardware Engineer, you may be responsible to develop a System Architecture of our LiDAR system based on product requirements. You will be working closely with all EE engineers to define the individual PCBs, their function, and interconnections. What you’ll be doing: • Break down product requirements into an architecture and EE PCB designs and their interconnections, • Work closely with Electrical Engineers as well as cross-functional engineering and product teams to review their designs in terms of function and layout placement, • Optimize architecture to reduce HW and SW complexity as well as optimize for cost and power consumption, • Direct ownership of PCBs and sub-systems of a LiDAR from schematic design through layout, fabrication and bringupWhat you have:, • BS, Masters or PH.D. degree in Electrical Engineering or related field, • 6+ years experience in HW design from architecture to implementation, prototyping and bringup all the way to high volume production, • Deep understanding of HW components, their interfaces and SW controls, • Good understanding of high speed designs with a variety of communication protocols (I2C, SPI, UART, Ethernet, PCIE etc), • Demonstrated experience and technical leadership in data acquisition subsystems including high-speed ADCs, high-precision analog sense paths and high-speed serial interfaces, • Demonstrated experience utilizing commercial SI/PI software tools, • Released several complex, multi-layer PCB designs into high volume production, • Be an active team member working closely with other EE engineers and other groups, • Ability to technically lead a small team of HW engineers is a plus, • Experience in motion control systems, design and theory is a plus, • A big plus if you have experience in LiDAR design or automotive product development The salary range for Mountainview, CA will be $154,900 - $209,600 per year. Salary pay ranges are determined by role, level, and location. Within the range, the successful candidate’s starting base pay will be determined based on factors including job-related skills, experience, certifications, qualifications, relevant education or training, and market conditions. These ranges are subject to change in the future. Depending on the position offered, equity, bonus, and other forms of compensation may be provided as part of a total compensation package, in addition to comprehensive medical, dental, and vision coverage, pre-tax commuter and health care/dependent care accounts, 401k plan, life and disability benefits, flexible time off, paid parental leave, and 11 paid holidays annually. Aeva is an Equal Opportunity Employer including protected Veterans and individuals with disabilities.

Job Description Responsibilities Eligible for Student Loan Payment Program or $7,500 Sign On Bonus! Artificial Intelligence; Advanced Technology; The very best in patient care. With decades of expertise, RadNet is Leading Radiology Forward. With dynamic cross-training and advancement opportunities in a team-focused environment, the core of RadNet’s success is its people with the commitment to a better healthcare experience. When you join RadNet as an Ultrasound Technologist, you will be joining a dedicated team of professionals who deliver quality, value, and access in the 21st century and align all stakeholders- patients, providers, payors, and regulators achieve the best clinical outcomes. You Will: • Perform high quality ultrasound procedures in strict accordance with currently approved practices as outlined in department policy and procedure manuals, complying with all applicable federal, state, local and other regulatory requirements., • Assist radiologists with ultrasound-guided biopsies and procedures if needed., • Understand the methods used to generate ultrasound data and the theory and operation of the instruments that detect, display, and store the acoustic information generated in clinical examinations., • Monitor patient's well-being during exams; recognizes patient discomfort or medical problems and takes appropriate action., • Demonstrates competency regarding the need to safeguard patient property and Patient Health Information., • Safeguards any on site medications in accordance with Company policies, procedures and any legal requirements., • Demonstrates respect for company property, including any cash and patient financial information on site or on patient portals., • Is responsive to the needs of others by exhibiting and maintaining professional behavior toward patients and coworkers., • Demonstrates respect for patient boundaries and cultural sensitivities during all interactions., • Demonstrates ability to interact diplomatically and sympathetically with patients, their families, and the public in a clinical setting., • Demonstrates ability to establish, nurture, and maintain cooperative working relationships. If You Are: • Passionate about patient care and exercise sound judgement and an ability to remain professional in all situations., • You demonstrate effective and professional communication, interpersonal skills and respect with patients, guests & colleagues., • You have a structured work approach, understand complex problems are and you are able to prioritize work in a fast-paced environment. To Ensure Success in This Role, You Must Have: • Applicants must have completed their Ultrasound Technologist program with diploma, • Passed SPI exam, • Current ARDMS certifications or ARDMS Registry Eligible preferred, • Must have BLS certification We Offer: • Comprehensive Medical, Dental and Vision coverages, • Health Savings Accounts with employer funding, • Wellness dollars, • 401(k) Employer Match, • Free services at any of our imaging centers for you and your immediate family Pay Range: $27.44-$36.50 per hour #USNY

Job Description Turn electrical schematics into finished products that power real-world applications! As a Panel Technician, you'll build and wire custom industrial control panels and OEM equipment alongside a team committed to quality and craftsmanship. Full-time, on-site. Monday - Friday. 7 AM - 3:30 PM. Panel Technician Primary Function • Build and wire custom industrial control panels as well as OEM products as assigned by the Panel Shop Supervisor, within schedule provided. $18 - $22/hour Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • EAP, • 401K, • ESOP (Employee Stock Ownership Plan) Panel Technician Essential Responsibilities • Build Custom Industrial Panels and OEM products meeting delivery dates, • Work independently with the project folder and design schematics to complete your responsible job., • Account for parts required for the job, • Mechanically layout and mount hardware components., • Wire complete panel in accordance with PFT panel procedures, UL508A specifications, and other best practices as given by the panel shop supervisor., • In large project situations work with other technicians in a team effort, • Test Custom Industrial Control Panels and OEM Products, • Point to Point wire tests in accordance with PFT testing procedures, • Torque check and marking in accordance with PFT procedures, • Be able to perform and fill out the PFT Panel Final Check list, • Maintain a neat and orderly work area at all times, • Organize and maintain shop tools and equipment, • Organize and maintain personal tools, • Organize and maintain your project items and materials, • Help maintain common shop supplies IE Labels, wire ties, wire, etc., • Assist Apprentices and other Technicians in techniques and procedures Panel Technician Necessary Qualifications • Basic Knowledge of Electrical Theory, • BOCES Electrical or AS in an Electrical Technology Field preferred, • Ability to read and interpret electrical schematics and mechanical drawings, • Must be able to follow and understand the PFT Shop Guidelines, • Ability to read and interpret technical manuals, • Ability to work with other Technicians and Apprentices in a professional manor, • Competent with the use of hand tools, i.e. jigsaw, drills, wrenches, screwdrivers, • Competent with the use of electrical test equipment, i.e. Multi meter, • Valid and Clean Driver's License Physical Requirements • Ability to stand for up to 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • You may be exposed to dust, loud noises, and hot and cold conditions, • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery Candidates need a clean and valid driver's license to operate company vehicles. We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionDescription: Paylocity is an award-winning provider of cloud-based HR and payroll software solutions, offering the most complete platform for the modern workforce. The company has become one of the fastest-growing HCM software providers worldwide by offering an intuitive, easy-to-use product suite that helps businesses automate and streamline HR and payroll processes, attract and retain talent, and build a strong workplace culture. While traditional HR and payroll providers automate basic HR processes such as payroll and benefits administration, Paylocity goes further by developing tools that HR and businesses need to compete for talent and deliver against the expectations of the modern workforce. We give our employees what they need to succeed, including great benefits and perks! We offer medical, dental, vision, life, disability, and a 401(k) match, as well as perks that support you, your family, and your finances. And if it’s career development you desire, we provide that, too! At Paylocity, people matter most and have always been at the heart of our business. Help our award-winning technology company run effectively as you take on big challenges and find solutions with a position in Operations. Use your problem-solving skills to shape the way others see Paylocity. Launch your career with us! This is a 100% in-office role based at our Rochester, NY location. Remote or hybrid work is not available for this position. Candidates must be able to work on-site five days per week during designated work hours.? Schedule: The schedule for this role is 9 - 6 pm EST. Position Overview: This role is responsible for delivering training to not only to general audiences at Paylocity, including but not limited to: CCCs, Inside Sales, ICs, AMs, and/or Clients. Responsibilities: The below represents the primary duties of the position, others may be assigned as needed. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Knowledge and Application: • Deliver advanced training through in person, virtual, and blended training to meet the various needs needs of the Inside Sales, Client Training or Implementation teams. Training events can include new hire, advanced skills, career progression readiness, leadership, and individual or team performance support., • Mentor and coach learners/employees through shadow sessions and 1:1 training., • Identify training gaps and create a needs analysis with all stakeholders to ensure training needs are met., • Maintain proficient understanding of adult learning theory and various learning styles and collaborate with other L&D Specialists, Instructional Designers, and business partners to ensure course curriculum, materials, modality and resources are aligned., • Ability to adapt various facilitation styles to accommodate classroom, virtual, group, and 1:1 environments., • Manage the structure and organization of training material in various knowledge management systems., • Act as a peer-mentor to new team members., • Serve as a Brand Ambassador for Paylocity's culture and values. Complexity and Problem Solving: • Proactively identify required curriculum enhancements and changes to meet the evolving needs of the department and then make the required changes in a timely manner., • Collect and analyze feedback from cross-functional leadership and subject matter experts to make change recommendations., • Conduct needs analysis and develop training material to be utilized at the team level. Discretion and Impact: • Evaluate internal audiences and communicate their progress to the respective managers with a journal write-up including all feedback and developed course of action following all 1:1 and coaching sessions with employees., • Collect and share feedback from trainees for the purposes of self-development and program enhancements., • Participate in cross-departmental training initiatives. Collaboration and Interaction: • Collaborate with cross-functional teams to perform training needs analysis and create curriculum enhancements., • Leverage non-training time to determine future training needs and enhancements and maintain knowledge of Paylocity’s services, processes, and products., • Actively participate in cross-departmental training initiatives. Management and Supervision: • Manage all aspects of classroom preparation including creating/distributing agendas, learning materials, scheduling invitations, managing rosters, scorecards and other requirements as needed., • Maintain scores in the top 20% of your peers on Surveys and LSOs. Education and Experience: • 3+ years training experience required., • Knowledge of/experience in applying learning theories and principles including adult learning theory., • Strong interpersonal skills to be able to communicate effectively to a multitude of personalities., • Ability to plan, lead, organize and manage multiple projects., • Professional written and verbal communication skills., • Attention to detail, analytical and critical thinking skills., • Experience with blended (ILT/VILT) learning approach preferred., • Proficiency with Microsoft Outlook and Office Suite – Word, PowerPoint, Excel., • Prior customer service experience, sales experience preferred., • Prior payroll experience preferred., • Team lead experience preferred., • Bachelor’s degree required. Physical requirements • Ability to sit for extended periods: The role requires sitting at a desk or workstation for long periods, typically 7-8 hours a day., • Use of computer and phone systems: The employee must be able to operate a computer, use phone systems, and type. This includes using multiple software programs and inquiries simultaneously. Paylocity is an equal-opportunity employer. Paylocity is committed to the full inclusion of all individuals. We recruit, train, compensate, and promote regardless of race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law. At Paylocity, we believe diversity makes us better. We embrace and encourage our employees’ differences in age, culture, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion or spiritual belief, sexual orientation, socio-economic status, veteran status, and other characteristics that make our employees unique. We actively cultivate these differences through our employee resource groups (ERGs), employee experiences, perspectives, talents, and approaches to drive innovation in the software and services we provide our customers. We comply with federal and state disability laws and make reasonable accommodations for applicants and employees with disabilities. To request reasonable accommodation in the job application or interview process, please contact accessibility@paylocity.com. This email address is exclusively designated for such requests, aligning with federal and state disability laws. Please do not send resumes to this email address, as they will be removed. The pay range for this position is $55,800 - $80,000 /yr; however, base pay offered may vary depending on job-related knowledge, skills, and experience. This position offers a full range of benefits outlined here. . This information is provided per the relevant state and local pay transparency laws for the location in which this position will be performed. Base pay information is based on market location. Applicants should apply via www.paylocity.com/careers. Requirements:

Job DescriptionDescription: We are Hiring! Job Posting: Accountant Location: Rochester, NY Department: Finance Employment Type: Full Time Schedule: Monday thru Friday days Salary: $65 to $75k As a regional agency of Catholic Charities of the Diocese of Rochester, Catholic Charities Family and Community Services (CCFCS) has been serving our community for over 100 years. We walk with people when they are at their most vulnerable as they journey toward independence to reach their full human potential, advocate for those in need throughout all stages of life; and work in partnership with faith communities of all denominations and those who are committed to addressing local needs. If you’re looking for an opportunity to express and explore your passion for helping others, then join a team that truly makes a difference DAILY, in people's lives. Don't miss out on being a part of something special! General Description An Accountant at Catholic Charities of the Diocese of Rochester (CCDOR) will handle multiple tasks with deadlines and provide transparent and complete reports to management in accordance with CCDOR’s Financial Policies and GAAP. This position requires a firm grasp of general accounting theory, techniques, and practices in addition to strong computer and verbal and written communication skills. The position reports to a member of CCDOR’s Finance Department leadership team and supports members of CCDOR’s programmatic staff and leadership teams. Individuals holding this position at CCDOR should be prompt, detail-oriented, professional, and analytical. The ability to successfully communicate complex quantitative data to decision-makers is essential. Essential Duties and Responsibilities • Prepares financial reports and analytics for various third party funding organizations in collaboration with programmatic leaders and staff., • Assists with applying CCDOR’s revenue recognition policies in accordance with Generally Accepted Accounting Principles (“GAAP”) for not-for-profit entities., • Audits, analyzes and reconciles ledger accounts to confirm completeness and accuracy of data. Uses judgment to assess whether account balances are reasonable; examines accounting documents to ascertain that transactions are properly supported in accordance with CCDOR’s policies and procedures., • Creates ad hoc reports as necessary to understand and explain agency financial activity., • Prepares journal entries, when necessary, in accordance with CCDOR policies., • Reviews program financial statements with program leadership to ensure compliance with third party funding agency contract terms and conditions., • Follows CCDOR’s internal control policies and assists with external audits., • Prepares reports to comply with external reporting requirements, including the preparation of midyear reporting and forecasts, cost reports, grant request information and follow up reporting, for funded programs., • Performs financial analysis on an as needed and requested basis., • Participates in the development and preparation of budgets for new programs and contracts., • Prepares annual operating budgets and financial forecasts as assigned., • Participates in meetings and training programs as required., • Prepares assigned Finance Committee and Board of Director meeting materials. Attends Board and committee meetings as directed ;, • Provides regional financial information to the Finance Department leadership for consolidating financial statements., • Maintains a high level of expertise in specialized areas through continuing education, individual contacts, and attendance at meetings as directed or necessary., • Understands and upholds CCDOR’s Mission, Vision, Values and Strategic Plan., • Performs other duties as assigned. Note: The above description is illustrative of tasks and responsibilities. It is not meant to be all inclusive. Employees are required to follow appropriate supervisory direction and perform other related duties as required. *Catholic Charities is committed to leveraging the talent of a diverse workforce to create great opportunities for our agency and our people. EOE/AA Disability/Vet Requirements: Qualifications: Education: Minimum of Bachelor’s Degree in Accounting. Bachelor’s Degree in Finance with requisite experience may be substituted at CFO discretion. Experience: • One (1) to three (3) years of professional accounting experience or equivalent combination of education and experience required. Accounting experience must include oversight of financial statement preparation., • Excellent analytical, organizational, communication skills and attention to detail required. Position requires strong Microsoft Office skills and ability to work in a fast-paced environment within tight deadlines., • Must have knowledge of generally accepted accounting principles (GAAP); must be proficient in financial/accounting software. Nonprofit experience preferred. Relevant combination of education and experience will be considered. Additional Qualifications: • Possess excellent verbal and written communication skills., • Ability to multi-task and prioritize duties., • Willingness to foster agency, departmental and program wide cooperation and teamwork through use of positive/constructive communication techniques., • Proficiency and experience with computers and computer software applications, including but not limited to Microsoft office., • Ability to analyze and interpret data and to handle problem resolution., • Possession of a valid NYS Driver’s license and a driver's record considered acceptable by agency and insurance carrier., • Continuous use of a reliable, registered, and insured vehicle., • Ability to travel in all weather conditions throughout the counties served., • Adheres to all applicable federal and state laws and regulations including, but not limited to, those governing confidentiality, privacy, program, billing, and documentation standards. All duties must be performed in accordance with CCDOR’s corporate compliance and ethics program., • Demonstrate commitment to CCDOR’s Mission Statement. Physical Demands/Work Environment: The physical demands/work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, talk, hear, stand, walk, use hands to type and/or perform light lifting. Specific vision abilities required by this job include close vision, distance vision and ability to adjust focus. The noise level in the work environment is usually quiet. Compliance: Adheres to all applicable federal and state laws and regulations including, but not limited to, those governing confidentiality, privacy, program, billing, and documentation standards. Any offer of employment will be contingent upon successful completion of a background check. CCDOR considers all background check information in accordance with applicable law. Top Benefits and Perks: • Competitive salary and 403b retirement plan, • Generous time off package and work-life balance, • Comprehensive benefits package, • Supportive and collaborative environment, • Opportunities for growth and development, • Intrinsic reward of truly making a difference in people's lives Join us and help make a positive impact in our community! *Catholic Charities is committed to leveraging the talent of a diverse workforce to create great opportunities for our agency and our people. EOE/AA Disability/Vet

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: Customer- Champion of customer advocacy, responsible for transforming the Voice of the Customer into actionable opportunities and driving customer satisfaction through data-driven analysis for prioritization of corrective measures and improvement opportunities. Systems- Responsible for championing the Integrated Business Management System (IBMS), maintain certification to ISO9001, 14001, FSSC and other standards as required, provide training, and writing procedures and processes to support the IBMS development. Lead and undertake audits across all areas of the business as well as across the supply chain. Maintain statistical tools for continuous quality and profit improvement projects. Lead and drive improvement actions from audits, customer complaints, and continuous improvement. Be the change agent for quality related projects. Validation- Apply project management and technical expertise to successfully deliver Validation program goals and outcomes while interacting with customers and meeting their expectations. ESSENTIAL DUTIES AND RESPONSIBILITIES: Customer • Leadership and management of customer complaint program including associated return and credit authorizations, leadership of team to identify root causes, implementing corrective actions to prevent recurrence and mitigate future quality risks, and timely communication back to customers., • Monitoring and reporting of complaint and quality data and trends for area dashboards, operations review, and systems management review., • Execution of formal weekly/monthly/annual Complaint Performance Reviews and reporting of complaint status to management team., • Provide backup for Quality Supervisors and Quality technicians., • Travel as required to work with customer, understand their concerns, and resolve issues., • Drive continuous improvement opportunities utilizing lean six sigma and the seven basic quality tools, to benefit the success of APC, including profit improvement plans, long and short-term strategic objective, helping establish problem solving teams and methods, and recommend capital projects that improve Safety, Productivity, and Quality., • Write and improve manuals, standards, and procedures as needed., • Use of statistical software and techniques for analysis of data including Process Capability (Cpk, Ppk), Statistical Process Control (SPC), and Design of Experiments (DOE), • Other duties as assigned. Systems • Oversee effective implementation of the IBMS including applicable certifications., • Maintain manuals and procedures and determine future procedural needs of the business., • Organize and manage the internal audit system and the corrective action system., • Host external audits, conduct internal audits and assist in training of other auditors., • Collect and analyze quality data and report on Key Performance Indicators (KPIs) to drive improvement., • Project leader for quality and continuous improvement activities and promote the use of improvement tools such as Six-Sigma, Error Proofing, and Measurement System Analysis., • Statical analysis of data using Excel, JMP, Minitab or other statistical software tools., • Recommend Capital projects that improve Safety, Productivity, and Quality within the operation., • Be the next level for complaint resolution with customers beyond the administration of the complaint. Duties would include identifying root cause, implementing corrective actions, and driving projects to proactively mitigate future quality risks., • Other duties as assigned. Validation • Manage the scope, schedule, and reporting of Validation program activities for individual products and/or customers; ensure status, risks, and open issues are tracked and that all stakeholders (Management, internal/external clients, Business Managers/Project Managers, and regulatory agencies) are informed in a timely manner., • Write and execute IQ/OQ/PQ validation protocols and management of associated deviation process., • Management and leadership of change control process, calibration process, and gage R&R process., • Provide hands on support to the manufacturing areas as required to assist in problem solving and long-term changes that provide product/process improvements in relation to process failures. Collect and analyze data to make data driven recommendations/decisions., • Participate in process failure investigations., • Maintain up to date knowledge of validation requirements, practices, and procedures and instruct other members of the site participating in validation studies., • Support risk analysis activities, including design and process FMEA., • Facilitate team meetings as needed on in-depth process and product analysis, risk assessments, decision-making, and other evaluations related to the Validation program., • Assist in internal and 3rd party audits., • Provide backup for Quality Supervisors and Quality technicians., • Drive continuous improvement opportunities utilizing lean six sigma and the seven basic quality tools, to benefit the success of APC, including profit improvement plans, long and short-term strategic objective, helping establish problem solving teams and methods, and recommend capital projects that improve Safety, Productivity, and Quality., • Write and improve manuals, standards, and procedures as needed., • Use of statistical software and techniques for analysis of data including Process Capability (Cpk, Ppk), Statistical Process Control (SPC), and Design of Experiments (DOE), • Other duties as assigned. Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Systems - Bachelor's degree (B. A.) from four-year college or university; and two years related experience and/or training; or equivalent combination of education and experience. ASQ certification is a plus. Customer & Validation - Bachelor's degree in science, mathematics, or engineering from four-year college or university, and two years related experience and/or training; or equivalent combination of education and experience. ASQ certification is a preferred. LANGUAGE SKILLS Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. MATHEMATICAL SKILLS Systems - Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. Demonstrated use of Minitab or JMP is a preferred skill. Customer & Validation - Ability to apply advanced mathematical concepts. Ability to utilize descriptive statistics (average, variation, standard deviation) to analyze data and support process control and capability analysis. Ability to create and interpret control charts, histograms, pareto charts, and scatter diagrams. Ability to develop statistically appropriate sampling plans. Ability to use and learn statistical analysis software. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS Systems - The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to talk or hear. The employee is occasionally required to walk. Customer & Validation - The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand, use hands to finger, handle or feel objects, tools or controls. The employee is occasionally required to sit, reach with hands and arms, stand, walk, stoop, kneel, crouch or crawl and climb or balance. The employee is regularly required to hear. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, distance vision, color vision, and the ability to adjust focus. Employee must also be able to taste/smell. WORK ENVIRONMENT Systems- The noise level in the work environment is usually moderate. While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to talk or hear. The employee is occasionally required to walk. Customer & Validation - The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

PURPOSE AND SCOPE: Functions as the hemodialysis team leader in the provision of chronic hemodialysis care and treatment. Provides day to day direction and supervision to assigned direct patient care staff. Communicates with the physician and other members of the healthcare team to interpret, adjust, and complete patient care plans. Provides safe, effective delivery of patient care in compliance with standards outlined in the facility procedure manual, as well as regulations set forth by the company, state, and federal agencies. Supports FMCNA's mission, vision, core values and customer service philosophy. Adheres to the FMCNA Compliance Program, including following all regulatory and FMS policy requirements. PRINCIPAL DUTIES AND RESPONSIBILITIES: General and Staff Related: Provide day to day guidance, support and direction to direct patient care staff, providing informal feedback on an ongoing basis and formal feedback input for the annual performance evaluation. Participate in the department staffing and the appropriate hiring, firing and disciplinary actions. Recommend disciplinary action to Clinical Manager and initiate as appropriate. Ensure compliance with all company and facility approved procedures and policies as well as regulations set forth by state and federal agencies in clinics with more than 100 patients. Approve or disapprove time or personnel schedule changes in the absence on the Clinical Manager ensuring compliance with applicable regulations, policies and procedures for documenting time of work hours for staff members on assigned shift. Participate in patient care plan meetings. Maintain knowledge in the current practices related to the principles and techniques of dialysis by participating in all scheduled in-services. Train and orient staff as necessary. Routinely observe and guide direct patient care staff for appropriate technique and adherence to facility policies and procedures. Promote and assist with compliance to OSHA programs in order to maintain a safe and clean working environment. Maintain overall shift operation in a safe, efficient, and effective matter. With Clinical Manager conduct staff meetings at least monthly or as needed to keep patient care staff informed of changes in patient care needs or operations to improve delivery of care. Meet routinely with the Clinical Manager to discuss personnel and patient care status, issues, and information. Supervise all documentation of patient information. Coordinate Charge Nurse duties with Staff RNs acting in the relief charge capacity. Patient Care: Assess daily patient care needs and develop and distribute patient care assignments appropriately. Assume primary responsibility in an emergency situation. Assess patient needs, respond to dialysis treatments, and communicate concerns to rounding physician. Implement changes in patient care/treatment as directed. Monitor and supervise all patient care activity during dialysis and assist as necessary. Collaborate with direct patient care team in making decisions to benefit patient care. Continuously monitor patient's condition with regards to problems and potential complications associated with dialysis. Administer medications to patients per physician's orders. Act as the subject matter expert and as a resource for staff members. Supervise and participate in completion of short- and long-term care plans. Admit new patients according to facility procedure. Ensure educational needs of patients are met and educate the patient and family about End Stage Renal Disease, dialysis therapy, diet and medication. Technical: Supervise the safe and effective use of all equipment involved in direct patient care. Operate all dialysis related and emergency equipment safely and efficiently when needed. Perform required testing and verification and initial the checklist for start-up and shut-down procedures as outlined in the Technical Services Manual. Complete Nurse's Technical Training Program/Water Quality Facility Training. Other: Assist with special projects or other duties as assigned by the Clinical Manager Assist with the interviewing of potential direct patient care staff as requested. Promote efficient use of medical supplies. Attend and participate in monthly Quality Assurance meetings. Other duties as assigned. Relationships: Internal Contacts: Direct Patient Care Staff, Facility support staff, management teams (Clinical Manager, Area Manager, RVP) External Contacts: Physicians, Back-up Hospitals Additional responsibilities may include focus on one or more departments or locations. See applicable addendum for department or location specific functions. The duties listed in this job description are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. PHYSICAL DEMANDS AND WORKING CONDITIONS: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employees are required to take the Ishihara's Color Blindness test as a condition of employment. Note that: Failing the Ishihara Test for Color Blindness does not preclude employment. The Company will consider whether reasonable accommodations can be made. Day to day work includes desk and personal computer work and interaction with patients, facility staff and physicians. The position requires travel between assigned facilities and various locations within the community. Travel to regional, Business Unit and Corporate meetings may be required. The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. May be exposed to infectious and contagious diseases/materials. SUPERVISION: Direct Patient Care Staff, Ward Clerk as assigned. EDUCATION : Graduate of an accredited school of Nursing (R.N.) Current appropriate state licensure. EXPERIENCE AND REQUIRED SKILLS: Minimum of 9 months of nursing experience and an additional 3 months of clinical experience in dialysis RN charge nurses assuming responsibility for nursing and patient servicesin the absence of the Clinical Managermust have one-yearclinical experience and six months dialysis experience. Supervisory or management experience preferred. Successfully completea training course in the theory and practice of hemodialysis. Good communication skills - verbal and written. Must meet appropriate state requirements (if any). Fresenius Medical Care maintains a drug-free workplace in accordance with applicable federal and state laws. EOE, disability/veterans

Job Description Center for Youth: Started BY YOUTH FOR YOUTH. We partner with youth to realize their full potential, by creating opportunities, removing barriers and promoting social justice. The Center ensures understanding and values differences in people of diverse cultures, ethnic origins, sexual orientation, disabilities and beliefs. Overview: The emergency shelter team provides emergency survival-support services to homeless and runaway youth 24 hours/day, 7 days/week, year-round. The Emergency Shelter Case Manager strives to engage and establish mutually respectful, trusting relationships with the youth we serve. Clients are approached from a strength and asset-based perspective. Case Managers form partnerships with youth to identify issues, concerns, and needs, and develop strategies to meet them. This position partners with the Youth and Family Counselor to provide case management, including assessments, referrals, transportation, and counseling. The Emergency Shelter Case Manager supports the day-to-day activities and milieu management of the Shelter, using a strength-based, positive youth development approach. Schedule: Full time, 37.5 hours per week. Sunday-Thursday, 10 am-6 pm, with flexibility to accommodate client and family needs Location: Emergency Shelter Responsibilities: • Assessments and service plans, • Case management & Crisis intervention, • Referrals and follow-up, • Aftercare, • Youth advocacy, transportation & support daily shelter activities, • Maintenance of facility and grounds Required Qualifications: • Bachelors Degree in Human Services OR Equivalent combination of experience and education, • Knowledge of youth asset development and risk reduction theory, and youth serving systems, community resources, partnerships and collaborations, • A valid Driver's license Skills: • Excellent verbal and written communication, • Positive youth development, • Knowledge of counseling approaches and techniques, • Group facilitation and training method skills, • Knowledge of community resources Pay Rate: $22.50- $24.50 per hour The Center for Youth Provides Equal Employment Opportunities

WellTheory is a digital health company helping people with autoimmune conditions take control of their health through personalized care, nutrition guidance, and ongoing coaching.We're a team of 50+ passionate people who believe better care starts with better relationships.We're also building one of

Job Title: Advanced Electronics / Computer Field (ET/FC) Category / Component: Enlisted Active Overview The Advanced Electronics and Computer Field trains Sailors to maintain, operate, and repair some of the Navys most sophisticated electronics and computing systems, including radar, communications, navigation, local area networks, weapons fire control, and Aegis combat systems. ETs and FCs form the backbone of a ships Combat Systems department aboard carriers, cruisers, destroyers, and other surface combatants, as well as at repair and technical activities ashore. Key Responsibilities Serve as an Electronics Technician (ET) or Fire Controlman (FC) after training, based on performance and Navy needs; as an ET, maintain and repair radar, communication, and navigation equipment including transmitters, receivers, displays, and shipboard communications suites such as SATCOM and HF; as an FC, operate, maintain, and repair fire control radars, computers, large screen displays, local area networks, weapon control consoles, and automatic gun systems; troubleshoot complex electronic and electro mechanical faults using technical documentation, test equipment, and established procedures; maintain configuration control, documentation, and logs that support inspections, certifications, and combat system readiness. What to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Work Environment Assignments aboard surface combatants such as aircraft carriers, Aegis cruisers and destroyers, and amphibious ships, as well as at shore based repair and technical facilities; daily work in combat systems spaces, radar rooms, communications centers, electronics shops, and shipboard network spaces; a mix of lab style environments and shipboard spaces with noise, ladders, confined areas, and occasional exposure to heat or weather when working on topside equipment. Pathways, Training & Advancement Recruit Training followed by Apprentice Technical Training at Great Lakes, Illinois, covering basic electronics, circuitry, safety, digital theory, microcomputers, fiber optics, test equipment, and troubleshooting; strand training in either the Fire Controlman or Electronics Technician track, with FCs focusing on radar, ballistics, and fire control basics, and ETs focusing on communications suites and radar systems; follow on A School and platform or system specific C Schools, often with college credit recommended by the American Council on Education; accelerated advancement to E4 upon completion of initial school training and all advancement requirements, with continued promotion based on performance, time in rate, and professional development. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: • Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy, • A high school diploma or equivalent for enlisted positions, and a bachelors or qualifying professional degree for officer positions, • Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges, • Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards, • Meeting character and conduct standards, including background screening, • Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs, • Eligibility for a security clearance when required for your rating or designator, • Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Normal hearing and color perception to work safely with electronic displays and color coded wiring and schematics; strong arithmetic and computing aptitude, with the ability to learn digital theory and complex technical systems; physical strength and manual dexterity to handle equipment, tools, ladders, and shipboard environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailors status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Manufacturing Technician B – 1st shift Job Code: 39610 Job Location: Rochester, NY Job Schedule: 5/8 Work schedule Monday through Friday 8 hours per day Job Description: Individuals may be responsible for troubleshooting and conducting tests on a variety of RF or digital printed circuit boards, subassemblies, or end products. Must be capable of using a variety of test equipment, logging information in technical databases and have a basic understanding of engineering schematics. Intermediate troubleshooting skills are required. This should include troubleshooting product, subassembly, and circuit board failures to component level. Must be able to work in a fast-paced environment with a cross-functional team. Essential Functions: • Responsible for conducting tests on a variety of RF or digital printed circuit boards, subassemblies, or end products, • Must be capable of using a variety of test equipment, logging information in technical databases and have a basic understanding of engineering schematics, • Basic foundational troubleshooting skills are required, • Must be able to work in a fast-paced environment with a cross-functional team Qualifications: Requires a High School Diploma or equivalent and a minimum of 4 years of prior relevant experience or 2 years post-Secondary/Associates Degree with 0 to 2 years of prior related experience. Preferred Additional Skills: • Basic knowledge of Electrical Engineering theory; associate degree (technical discipline) is preferred, • Electronics / RF or Digital Troubleshooting Experience preferred, • Experience with L3Harris RFCD products and assembly processes is preferred, • Able to perform LabVIEW driven automated tests, • Familiar with basic test equipment, i.e. Signal generators, oscilloscopes, power meters, spectrum analyzers, • Able to read and understand schematic diagrams, • MS Office programs such as Word, Excel, and Outlook, • Strong Customer focus, • Capable of identifying problems and contributing to process improvements, • Familiarity with basic computer software such as Microsoft Word and Excel In compliance with pay transparency requirements, the salary range for this role in New York state is $41,500 - $76,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

As a community, the University of Rochester is defined by a deep commitment to Meliora - Ever Better. Embedded in that ideal are the values we share: equity, leadership, integrity, openness, respect, and accountability. Together, we will set the highest standards for how we treat each other to ensure our community is welcoming to all and is a place where all can thrive. Job Location: 211 Bailey Rd, Rochester, New York, United States of America, 14586 Opening: Worker Subtype: Regular Time Type: Time as Reported / Per Diem Scheduled Weekly Hours: As Scheduled Department: 500240 Lab Admin-Clin Labs SMH Work Shift: UR - Day (United States of America) Range: UR URG 107 H Compensation Range: $23.27 - $32.60 The referenced pay range represents the minimum and maximum compensation for this job. Individual annual salaries/hourly rates will be set within the job's compensation range, and will be determined by considering factors including, but not limited to, market data, education, experience, qualifications, expertise of the individual, and internal equity considerations. GENERAL SUMMARY: Performs professional accounting work at an operating level requiring knowledge and application of general accounting theory, techniques and practices and knowledge of the University accounting system. Works closely with the various levels of the University community to research, review, and reconcile various ledger accounts within UR Financials. • Completes analyses of ledger accounts to confirm completeness and accuracy of data. Determines whether account balances are reasonable. Examines accounting documents to ascertain transactions are properly supported in accordance with University policy and procedures. Initiates corrective action or recommends solutions as appropriate. Prepares routine working papers, exhibits, and summaries supporting findings and recommendations., • May perform the foregoing for specific accounts or certain groups of accounts, such as those involving third party agreements, contracts, grants, auxiliary enterprises, fixed assets, etc., which require knowledge of policies, regulations, and other criteria uniquely applicable to maintaining these accounts., • Participates in the preparation of quarterly financial statements and related footnote disclosures in accordance with US GAAP. Performs analysis of financial statement balances and activity. Prepares accurate reports to support research results., • Prepares a variety of routine financial statements or accounting reports for which the format has been established. Other duties as assigned. • Bachelor's degree in accounting and 1 year of professional accounting experience required, • Or equivalent combination of education and experience, • Excellent analytical, organizational, communication skills and attention to detail required, • Strong Microsoft Office skills required, • Ability to work within tight deadlines required The University of Rochester is committed to fostering, cultivating, and preserving an inclusive and welcoming culture to advance the University's Mission to Learn, Discover, Heal, Create and Make the World Ever Better. In support of our values and those of our society, the University is committed to not discriminating on the basis of age, color, disability, ethnicity, gender identity or expression, genetic information, marital status, military/veteran status, national origin, race, religion, creed, sex, sexual orientation, citizenship status, or any other characteristic protected by federal, state, or local law (Protected Characteristics). This commitment extends to non-discrimination in the administration of our policies, admissions, employment, access, and recruitment of candidates, for all persons consistent with our values and based on applicable law.

Job DescriptionDepartment: Harm Reduction Services Position type: Full-Time FLSA: Non-exempt Job Summary: Working as part of a multidisciplinary healthcare team, the Community Health Specialist provides harm reduction, sexual health, outreach, testing, and service navigation services to individuals experiencing health disparities throughout the Greater Rochester and Finger Lakes regions. This position delivers client-centered services grounded in trauma-informed care and health equity principles, with a focus on priority populations. The Community Health Specialist engages individuals through outreach, education, testing, prevention programming, and linkage to health care, helping clients improve health outcomes and access needed resources and services. Duties/Responsibilities: 1. Outreach & Community Engagement • Conducts community-based outreach throughout Monroe County and the Finger Lakes region., • Builds trusting relationships with individuals, community partners, and service providers., • Operates agency vehicles, including mobile outreach units, in accordance with organizational policies., • Represents Trillium Health at community events, outreach activities, coalitions, and public education initiatives., • Distributes educational materials and prevention resources during outreach and engagement activities., • Promotes awareness of Trillium Health services and facilitate access to care and support services., • Identifies service gaps and contributes to outreach and engagement strategies that address community needs. 1. Testing, Prevention & Health Education • Completes required training and competency requirements for HIV, HCV, and STI testing services., • Provides HIV, HCV, and STI screening and testing onsite and in community, events, and mobile settings., • Delivers culturally responsive health education related to HIV, HCV, STIs, substance use, and other relevant emerging public health concerns., • Integrates overdose prevention, harm reduction, and HIV prevention strategies, including PrEP and PEP education, into outreach and service delivery activities., • Assists clients in developing individualized risk-reduction plans., • Facilitates access to prevention services, treatment, and care, including PrEP, PEP, HCV treatment and Rapid Start ART (Antiretroviral Therapy) when appropriate., • Supports development and implementation of educational programming and outreach initiatives., • Serves as a knowledgeable resource regarding Trillium Health programs and services. 1. Care Navigation & Linkage to Services • Conducts screenings to identify social determinants of health, barriers to care, and unmet client needs., • Develops and coordinates client-centered service plans., • Provides referrals and active linkage to internal and external services, including:, • Primary care, • Specialty Care (HIV and HCV treatment, Medication for Opioid Use Disorder (MOUD), • Behavioral health services, • Other supportive [JR1] services as needed, • Supports individuals who are newly diagnosed with HIV and/or HCV, out of care, or at increased risk for adverse health outcomes., • Assists clients in navigating healthcare systems, insurance enrollment, and community resources., • Maintains ongoing communication with clients to support engagement in care and successful service connections. 1. Administrative & Quality Improvement Responsibilities • Collects, maintains, and reports program data in accordance with organizational, funder, and regulatory requirements., • Documents services accurately, completely, and within required timeframes utilizing electronic systems, including electronic medical records (EMR) and AIDS Institute Reporting System (AIRS)., • Participates in staff meetings, supervision, training, and professional development activities., • Collaborates effectively with interdisciplinary teams and community partners., • Contributes to quality improvement, compliance, and program evaluation efforts., • Maintains confidentiality and adheres to all organizational policies, procedures, and data security requirements., • Supports onboarding, training, and mentoring activities as assigned. Miscellaneous: • Requires the ability and commitment to respect and support patients, other employees, and visitors with various lived experiences., • Requires individual demonstration of commitment to the mission, vision, One Trillium values, behaviors, and modeling them in the organization., • Responsible for maintaining confidentiality of all patient, client, employee, protected, and proprietary information., • Employees are accountable for meeting departmental performance standards and must participate as requested in compliance audits and quality improvement plans., • Required to participate in continuous improvement of job responsibilities and organizational or work processes to advance the organization or department., • Other duties as assigned Required Skills/Abilities: • Understanding of and commitment to harm reduction theory and practice., • Bilingual in Spanish and/or ASL desired., • Knowledge of trauma-informed care, motivational interviewing, and health equity principles., • Experience working in community-based social services and/or outreach., • Valid driver's license and ability to travel throughout the service area., • Ability to work flexible hours, including evenings and weekends, as needed., • Ability to safely operate agency vehicles and mobile service units. Education and Experience: Must meet one of the following: • High School Diploma or equivalent and four (4) years of experience in sexual health services, health education, public health, human services, or a related field; or, • Associate degree and two (2) years of related experience (prevention, community outreach, public health, harm reduction, care navigation, health and human services); or, • Bachelor's degree in Health Education, Public Health, Human Services, or a related field and experience working with underserved populations (including individuals and communities who experience barriers to healthcare and social services, including people impacted by poverty, housing instability, substance use, behavioral health needs, justice involvement, stigma, discrimination, limited insurance coverage, or limited access to culturally responsive care). Physical Requirements: While performing the duties of this job the employee is required to stand, sit, walk, use hands to finger, handle, or feel; reach with hands and arms, talk and hear. Occasionally the employee must stoop, bend and lift or move up to 25 lbs. Specific vision abilities required include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. In support of the Americans with Disabilities Act, this job description lists only those responsibilities and qualifications deemed essential to the position.

Job Description Job summary: To provide engineering and development support to ensure the most economical and feasible methods are utilized for each project. Responsible for collaborating with the customer in developing new products and expand upon existing product lines. Essential Duties and Responsibilities: • Able to make decisions on new production quotes and expansion of product lines for customers., • Consults with customer’s technical personnel regarding current and upcoming projects or concepts., • Develops new products from concept to full production., • Conducts a search of new materials, processes, and procedures necessary to enhance and improve a product., • Prepares accurate cost analysis of projects and forecasts accurate delivery times for quotation process., • Review new projects to determine effectiveness of design regarding moldability, tool concept, assembly and material required., • Monitors work in process and assures that the customer is advised and approves alterations made to product or schedule., • Provides engineering support and input to departments within company., • Ensures designs of tools & fixtures have appropriate concept and support for design & mfg., • Assists manufacturing department in development of processes and mold necessary for production., • Authority to cease or allow production on parts that do not meet specs. Additional Responsibilities: • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency and makes recommendations., • May represent Program Management Department on cross-functional teams., • When requested, may work on special projects and various related assignments., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low, moderate to loud. Education, Skills and Experience: • Bachelors degree in Engineering or equivalent in education and experience., • Minimum 5 years experience in plastics or related industry, • Sound knowledge of engineering theory and design criteria, • ISO experience a plus., • Need to have excellent relationship-building skills., • Good oral and written communication skills., • Strong organization skills., • Must be familiar with computers and computer software., • Work independently with minimal supervision. This job description in no way states or implies that these are the only duties to be performed by this employee. He/she will be required to follow any other instructions and to perform any other responsible duties as requested by his/her supervisor. Syntec Technologies is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, gender, age, disability, protected veteran status, or any other reason prohibited by law.

Job DescriptionYou’ve Never Been Satisfied with "Good Enough." You want to make an impact, not just manage projects, but change how the world gets built. At Accenture Infrastructure & Capital Projects, you’ll do exactly that. You’ll help develop and deliver the factories, grids, transit systems, and public infrastructure that keep communities moving - and do it smarter, safer, and more sustainably than ever before. You’ll work alongside people who think big and act bold - project managers, engineers, technologists, and strategists who blend real-world experience with digital innovation and AI. Together, we’re transforming how capital projects are planned, managed, and executed, creating a better way to build for the future. Because “good enough” builds the past. You’re here to build what’s next, on a team that outperforms every norm. Visit us here to learn more about Accenture Infrastructure & Capital Projects As Accenture continues to grow, you may see a variety of new career opportunities, and depending on the role and location you may be directed to apply through Accenture Infrastructure and Capital Projects LLP or one of our other legal entities - Accenture Infrastructure and Capital Projects, LLC or Accenture Infrastructure and Capital Projects Inc., with benefits varying by country and role, so please check with your recruiter for details. THE WORK: • You’ll lead field construction activities and oversee construction and maintenance operations across multiple service areas., • You’ll perform pole groundline inspection and treatment., • You’ll perform wood and steel pole inspection, repair, and restoration., • You’ll perform aluminum bell base insulator replacement., • You’ll execute other transmission, distribution, or substation system upgrades., • You'll perform Transmission line (T‑line) work ranging from 0–30 miles in scope, • You’ll champion project readiness and manage field teams by ensuring contractor inspectors, field supervisors, and coordinators fully understand project goals, expectations, and safety requirements., • You’ll provide technical guidance and problem‑solving by ensuring all work complies with technical specifications, assisting with material procurement coordination, and resolving technical issues raised by field teams or contractors., • You’ll enforce safety and identify hazards by proactively identifying, evaluating, and reporting hazardous conditions to maintain a safe work environment for all personnel., • You’ll drive quality assurance by monitoring work for quality and compliance, such as C‑Truss installations, T&D wood pole restoration, and other structural repairs.HERE’S WHAT YOU’LL NEED:, • Professional experience in the construction and maintenance of substation facilities and/or transmission/distribution systems,, • 10+ years of experience in construction & maintenance of electrical transmission/distribution/substation systems OR a bachelor’s degree and 5 years of field experience OR an associate’s degree and 8 years of field experienceBONUS POINTS IF YOU HAVE:, • High-voltage experience and working knowledge of electrical theory, • Switching and tagging experience for projects requiring hold/markup, • Professional experience managing field construction projects and teams in similar roles, • Technical knowledge and professional experience in pole and tower inspections, repairs, and restoration, • Professional experience with environmental regulations for construction, • OSHA 30 certification, • First Aid/AED certification Compensation at Accenture varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set, and level of experience. As required by local law, Accenture provides a reasonable range of compensation for roles that may be hired in Illinois, Maine, Minnesota, California, Colorado, District of Columbia, Maryland, Massachusetts, New York, New Jersey, Ohio, Virginia or Washington as set forth below. We believe that no one should be discriminated against because of their differences. All employment decisions shall be made without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by federal, state, or local law. Our rich diversity makes us more innovative, more competitive, and more creative, which helps us better serve our clients and our communities. For details, view a copy of the Accenture Equal Opportunity and Affirmative Action Policy Statement Accenture is an EEO and Affirmative Action Employer of Females/Minorities/Veterans/Individuals with Disabilities. Accenture is committed to providing veteran employment opportunities to our service men and women. Accenture I&CP offers a comprehensive benefits package including medical, dental, and vision coverage; basic life and AD&D insurance; short- and long-term disability; a 401(k) with employer match; health savings and flexible spending accounts; paid time off and holidays; paid maternity and parental caregiver leave; adoption and surrogacy assistance; supplemental insurance plans; an employee assistance program; legal resources; and identity theft protection. Benefits eligibility may vary by state, country, and role. Please connect with your recruiter for more information.

Job DescriptionDescription: Position Summary Performs basic receiving, first-piece, in-process and final inspection in accordance with applicable quality system procedures and work instructions. Evaluates materials, components and/or assemblies for conformance to specification requirements or established workmanship standards. Applies basic statistical techniques, including statistical process control and sampling plans, to assess the stability of various processes or reduce collected raw data. Essential Duties and Responsibilities • Perform receiving inspection of incoming supplies requiring quality assurance evaluation prior to dispatch using the appropriate sampling plan., • Perform first-piece inspection of machined product and conduct in-process audits of work-in-progress in accordance with documented procedures under supervision., • Perform final inspection and test of deliverable product in accordance with documented procedures prior to release for shipment or storage., • Complete all required inspection and test records appropriate to the particular task and results of the inspection., • Understand and apply basic geometric dimensioning and tolerancing symbology., • Employ basic statistical tools to interpret data., • Understand Vantage operation for time and data reporting., • Perform other duties assigned by supervisor. Education, Training and/or Experience Associate’s degree (AA) or equivalent from a two-year college or technical school; or 6 months related experience and/or training; or equivalent combination of education and experience. KSAO:This List represents the kinds of knowledge, skills, abilities and other characteristics that will be assessed in the performance of the employee performing this position.1 Written and Oral Communication • 1.1 Reading, Writing, Speaking & Listening 2 Mathematics • 2.1 Arithmetic, • 2.2 Applied Geometry, • 2.3 Applied Algebra, • 2.4 Applied Trigonometry, • 2.5 Applied Statistics 3 Decision Making & Problem Solving • 3.1 Applying Decisions, • 3.2 Basic Problem Solving 4 Social Skills & Personal Qualities • 4.1 Social Skills, • 4.2 Personal Qualities 5 Engineering Drawings & Sketches • 5.1 Basic Blueprints, • 5.2 Standard Blueprints, • 5.3 GD&T Reading 6 Measurements • 6.1 Basic Measurements, • 6.2 Precision Measurements, • 6.3 Surface Plate Instruments 7 Metalworking Theory • 7.1 Cutting Theory, • 7.2 Tooling, • 7.3 Material Properties, • 7.4 Machine Tools, • 7.5 Cutting Fluids & Coolants Quality System Documents Applicable to Position PGM is a process-driven company that is totally committed to customer satisfaction, evident by performance through the prevention of non-conformances at all stages of our relationship with purchasers of our products. Accordingly, all employees are empowered to identify problems with system, process or product quality and whenever possible, prevent discrepancies and suggest continuous improvement opportunities. PGM’s mission, vision and value statements are published in the Quality Management System (QMS) Policy Manual and posted throughout the building. The PGM QMS manual details the responsibilities that all employees share in the overall documented quality system. Requirements:

Job Description Adecco Healthcare & Life Sciences is assisting our client with hiring an LPN Nursing Clinical Coordinator in Rochester, NY! This role is on site / in person. Please read below and apply with an updated resume for consideration: Type: Full Time, Direct Hire with client! Schedule: Monday through Friday, 7:30am to 5pm Pay: $80,000 - $85,000 per year based on experience Key Responsibilities of the LPN Nursing Clinical Coordinator: Coordinates recruiting, selection, contracting, monitoring, and evaluating clinical sites and faculty. Provides coaching, training, and guidance to clinical faculty. Works in conjunction with the Nursing Academic Program Director, Associate Nursing Academic Program Director, and academic advisor to set up clinical schedules and evaluate student clinical learning experiences. Visits all clinical sites at least once each rotation to ensure sites continue to support a relevant and comprehensive nursing experience. Ensures all documentation, reporting, and clinical activities are following all standards, competencies, policies, and guidelines set forth by local, state, and national accrediting agencies. Participates in Influencer Relations Activities with healthcare facilities including, but not limited to, active participation in related professional associations, and building business connection in the community. Researches and analyzes data to identify field, market, and campus trends. Serves as the first point of contact for resolution of clinical personnel issues, which may arise between staff at the clinical site and clinical faculty and students. Models lifelong learning and ensure program quality through continuous professional development. Other responsibilities as assigned, to include teaching as needed. Teach two clinical rotations per term (up to 14 contact hours). Other duties as assigned Qualifications for the LPN Clinical Coordinator: Minimum of Bachelor’s degree in Nursing, Masters preferred. Current NYS RN licensure Must have a minimum of two (2) years work experience as a nurse Familiarity with simulation, virtual clinical excursion and Nursing informatics systems and technologies currently used in Nursing programs Some instruction in educational theory and techniques desired Client benefits available Competitive salaries Medical, Dental, Vision Generous paid time off 401k Companies paid college tuition for associates and their families Pay Details: $80,000.00 to $85,000.00 per hour Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Job Type: Full-time Job Location: Rochester, NY Pay: $25.00 - $35.00 per hour based on experience Supplemental Pay: • Overtime pay, • Performance bonus Schedule: • Extended hours, • Monday to Friday, • On call ACT Power Services was created to provide industry leading services for our clients. As an independent service provider, we avoid conflicts of interest and maintain a complete focus on our clients' needs. We have taken a no-frills approach to developing our organization to ensure our clients are only paying for services that add value. ACT then leverages a world-class team, state of the art technology, and best-in-class operating practices to ensure every facility is operated in a manner that maximizes production, preserves compliance, and ensures the safety of our personnel and communities. Our vision is to reshape the industry's benchmark for renewable operations and create the next generation of O&M provider. The Field Service Technician is and entry-level position responsible for the safe, productive repairs and maintenance of Commercial and Utility Scale Solar PV plants. From performing preventative maintenance and inspections, to troubleshooting and making repairs to maximize production, the Solar Maintenance Technician gets to exercise a verity of skill sets and has constant opportunities to learn more. All while making an impact on our safe, reliable, clean energy future. This role will encompass performing the preventative and corrective maintenance on the solar modules, strings, trackers, and inverters. Responsibilities • Uphold a high level of safety standards in everything that you do, • Conducting routine preventive maintenance, service, troubleshooting and repair of solar photovoltaic facilities, • Willingness to learn the NEC code, electrical theory, and industry best practices, • DC and AC testing included but not limited to polarity, open circuit voltage, grounding continuity, communication, insulation resistance testing, I-V curve tracing, • Interpret schematics to understand system layouts and connections, • Maintain a schedule for routine maintenance, service, trouble shooting and repair of equipment at solar photovoltaic facilities including but not limited to: Single Axis trackers, Central or String Inverters, Transformers, AC and DC disconnects, Substation equipment, • Maintaining company property such as vehicle, tools, meters and plant stock, • Maintaining service reports, inspection documentation, safety paperwork, and spare parts inventory, • Provide maintenance and troubleshooting training to technicians and others as needed, • Identify safety hazards and take appropriate action to remove or eliminate hazards Qualification Requirements • Familiarity with electrical systems and components, • Proficiency in using power tools for repair tasks, • Ability to read and interpret schematics accurately, • Proficiency with MS Office suite, • Ability to take direction and complete tasks with minimal oversight, • Valid Driver's License, • Working knowledge and experience operating under OSHA 1910, NFPA 70E, and 70B, • OSHA 10 General Industry certificate, • Must have the ability to travel, work on-call during off-shift hours and weekends Physical Requirements/Work Environment: • Work is to be performed outdoors at various job sites., • Must be able to comply with all safety standards and procedures. PPE personal protective equipment is required., • Must have the ability to sit, stoop, kneel, bend, stand, or walk for 8-10 hours a day., • Must be able to lift, push, or pull up to 50 pounds on an occasional basis Benefits: • 401(k) with employer match, • Health Insurance, • Dental Insurance, • Vision Insurance, • Flexible Spending Account, • Health Savings Account, • Short-term and Long-term disability, • Critical illness, • Paid Time Off, • Parental Leave, • Paid Holidays, • Employee assistance program, • Life insurance, • Opportunities for advancement, • Training and Development, • Legal and Identity Theft, • Company vehicle opportunities, • Pet Insurance Act Power Services does not accept any unsolicited resumes or referrals from any third-party recruiting firms or agencies.