Trabajos utilities operator en New York, New YorkCrear alertas

Job DescriptionDescription: POSITION SUMMARY The Facilities Maintenance Specialist is responsible for the reliable operation, maintenance, troubleshooting, and improvement of facility infrastructure and building systems supporting a GMP pharmaceutical/biotechnology manufacturing and laboratory environment. A primary responsibility of this position is the operation, troubleshooting, and maintenance of the Siemens Building Management System (BMS), including Siemens Desigo controls. The individual will use the BMS to monitor and troubleshoot HVAC and facility systems, analyze alarms and trends, evaluate equipment performance, and support environmental conditions throughout the facility. CORE REQUIREMENT – SIEMENS BMS / CONTROLS The successful candidate must have demonstrated hands-on experience with Siemens Desigo or a comparable Siemens Building Management System and be capable of using the BMS to troubleshoot HVAC equipment, alarms, sensors, valves, dampers, control sequences, trends, and environmental conditions. Requirements: KEY RESPONSIBILITIES • Serve as a key Facilities resource for the Siemens Desigo Building Management System (BMS)., • Monitor and troubleshoot HVAC and facility equipment through the Siemens BMS., • Diagnose BMS alarms, equipment faults, communication issues, sensor problems, and abnormal operating conditions., • Review AHU, RTU, chiller, boiler, humidifier, exhaust, and other HVAC system graphics and operating parameters., • Analyze BMS trends for temperature, humidity, pressure, airflow, supply/return temperatures, valve position, damper position, and other critical parameters., • Troubleshoot control loops and determine whether issues originate from controls, sensors, actuators, valves, dampers, mechanical equipment, or field devices., • Understand HVAC control sequences, including heating/cooling valve operation, humidity control, temperature control, and differential pressure., • Adjust authorized BMS setpoints, schedules, alarm limits, and operating parameters in accordance with approved procedures., • Identify recurring alarms and equipment performance issues and recommend corrective actions., • Work with Siemens and other controls vendors to troubleshoot system issues and implement corrective actions., • Support BMS upgrades, programming modifications, graphics changes, controls installations, and system commissioning., • Verify proper operation of controls following maintenance, repairs, or system modifications., • Maintain accurate documentation of BMS changes, alarms, troubleshooting activities, and corrective actions. FACILITIES MAINTENANCE • Perform preventive, predictive, and corrective maintenance on facility equipment and systems., • Troubleshoot and maintain AHUs, HVAC systems, chillers, boilers, pumps, compressors, vacuum systems, humidification systems, exhaust systems, plumbing systems, electrical systems, and building automation/control systems., • Troubleshoot low-voltage electrical and control circuits., • Perform inspections and monitor facility equipment for abnormal conditions., • Respond to equipment failures and facility emergencies., • Complete maintenance work orders and accurately document work performed., • Support contractors and outside service providers during repairs, inspections, and projects., • Assist with facility construction, equipment installation, relocation, and retrofit projects. GMP / LABORATORY ENVIRONMENT • Perform maintenance activities in GMP pharmaceutical, biotechnology, and laboratory environments., • Understand the impact of HVAC and facility systems on controlled environments., • Support temperature, humidity, pressure differential, and environmental monitoring requirements., • Follow applicable GMP, safety, environmental, and facility procedures., • Support investigations involving HVAC, facility equipment, environmental excursions, alarms, and system failures., • Work closely with Quality, Engineering, Operations, EH&S, and external contractors when required. PREVENTIVE / PREDICTIVE MAINTENANCE & RELIABILITY • Complete scheduled PM and demand work orders in a timely manner., • Identify recurring equipment problems and recommend reliability improvements., • Participate in root-cause troubleshooting and corrective actions., • Identify opportunities to improve equipment reliability and reduce downtime., • Maintain accurate equipment and maintenance records. VENDOR / CONTRACTOR MANAGEMENT • Provide oversight and technical direction to outside contractors and service providers., • Coordinate Siemens controls service and troubleshooting activities., • Review contractor work and verify that repairs meet facility requirements., • Assist with obtaining quotes, scheduling service, and coordinating facility projects. REQUIRED QUALIFICATIONS • High school diploma or equivalent; technical degree, trade certification, or associate degree preferred., • Minimum 5–7 years of facilities maintenance, building automation, HVAC, or facilities operations experience., • Strong hands-on experience with Siemens Desigo or comparable Siemens Building Management Systems., • Demonstrated experience troubleshooting HVAC equipment through a BMS/controls system., • Strong understanding of AHUs, HVAC systems, valves, dampers, pumps, sensors, actuators, and control sequences., • Experience working in a GMP pharmaceutical, biotechnology, laboratory, or similarly regulated environment preferred., • Strong mechanical and electrical troubleshooting skills., • Ability to read mechanical, electrical, HVAC, and controls drawings., • Experience with preventive and predictive maintenance programs., • Ability to work independently with minimal supervision., • Strong computer skills, including Microsoft Word, Excel, Outlook, and CMMS software., • Strong written and verbal communication skills. PREFERRED QUALIFICATIONS • Siemens Desigo certification or formal Siemens controls training., • Experience with Siemens Desigo CC, Insight, or related Siemens BMS platforms., • Experience troubleshooting DDC controls., • Experience with HVAC control sequences and PID/control loops., • Experience with BMS graphics, trending, alarm management, and system scheduling., • HVAC, electrical, controls, or stationary engineer trade certification., • NJ Black Seal Boiler Operator License., • Experience with cleanrooms and controlled environments., • Experience with chilled water, hot water, steam, compressed air, vacuum, and other facility utilities. PHYSICAL / SCHEDULE REQUIREMENTS • Frequent walking, standing, climbing, bending, kneeling, and working in mechanical spaces., • Ability to work from ladders and elevated locations and lift up to 50 lbs., • Participation in an on-call rotation., • Weekend and holiday coverage as required., • Overtime may be required based on facility needs., • Must successfully complete applicable background and drug/alcohol screening. SUCCESS IN THIS ROLE The successful candidate will be able to independently use the Siemens BMS as a troubleshooting tool—not simply monitor alarms. The individual should be able to connect BMS data to the physical equipment, identify the likely source of an HVAC or environmental problem, determine whether the issue is controls-related or mechanical, and coordinate the appropriate corrective action while mainta

Job Description Title: Operator Location: Cedar Knolls, NJ (on-site) Status: Full Time (40 hours), Non-exempt Hourly Range: $33.63 Hourly + Overtime Benefits: We offer a competitive salary package, commensurate with experience, Comprehensive Health Benefits (medical, dental, vision), PTO including vacation, sick, and other forms of PTO, Retirement benefits, 457b option, Tuition Reimbursement/paid training, FSA, Life insurance (waiting periods may apply). Job Description Scope: The Operator performs a variety of operational and maintenance duties within the Water Quality and Operations Division to support the delivery of safe and reliable drinking water. Under direction, the position operates, monitors, and maintains water treatment and pumping systems, including pumps, valves, tanks, and related equipment, and conducts routine water quality sampling, testing, and data recording. The role supports treatment processes through chemical feed adjustments, equipment inspections, troubleshooting, and preventative maintenance activities. The Operator coordinates and assists with treatment and distribution system operations, maintains accurate operational records, and utilizes SCADA and other monitoring systems. This position requires demonstrated intermediate-level proficiency in water treatment operations and continued development of technical skills related to system operation, maintenance, and repair. Additional responsibilities include operating vehicles and equipment, maintaining work areas, supporting snow removal activities, and participating in standby rotations and emergency response activities as required. Key Responsibilities: • Render services for the purposes of providing a safe and reliable water supply for the public to the SMCMUA customers., • Demonstrated high level of customer service in accordance with SMCMUA standards., • Coordinates activities of workers engaged in filtering, physically and chemically treating, pumping, and testing raw and treated water throughout all processes., • The position requires demonstrated intermediate (recall) level proficiency in four (4) of the following functional areas. Proficiency is measured by demonstrated skills in SMCMUA standards, preventative maintenance, troubleshooting, repairs, installation of new equipment, and the use of tools and technology applicable to the functional area., • Treatment and Related Systems:, • Laboratory, Field, and/or Online Analysis, • Treatment Processes, • Treatment Plant, Pump Station, and Letdown Station Operation and/or Maintenance, • Electrical and/or Instrumentation and Controls, • Operate, maintain, inspect, troubleshoot, and repair treatment and pumping/storage equipment, tanks, pumps, valves, processes, industrial controls, and other related treatment and pumping/storage equipment and facilities., • Distribution of specified amounts of chemicals, such as sodium hypochlorite, orthophosphates, sodium hydroxide, sodium bisulfite, citric acid, and hydrochloric acid into water or adjustment of automatic devices., • Monitors panelboard, adjusting controls to regulate flow rates, loss of head pressure and water elevation, and distribution of water., • Backwashes tanks and filter beds., • Required to participate in Record Data Management in the following areas of Water Quality:, • Record Data content of chemical usage, water quality parameters, pressure gauges, flow meters, charts, HMI’s, and SCADA computer., • Maintains records and files with chemical usage and storage, equipment operation, and required water quality/ quantity data., • Takes and records periodic readings of relevant gauges., • Will be required to learn to utilize various types of electronic and/or manual recording and information systems used by agency, office, and related units., • Operate vehicles requiring a NJ Basic driver’s license and tow equipment and trailers., • Field and process control water quality analyses., • Sample collection, and analyze samples to determine pH, chlorine concentration, orthophosphate concentration, and turbidity, using specified equipment, i.e. colorimeter, turbidimeter, and pH meter., • Maintains the working area in a clean/ sanitary condition., • Continuous water quality monitor operation, maintenance, calibration, and troubleshooting related to all physical components of water system equipment., • Basic laboratory chemistry and microbiology analyses., • Use various hand tools., • Use various power tools and equipment., • Load, unload, and lift supplies, equipment, etc., • Operate snow removal and salting equipment to keep roads, parking lots, driveways, etc. clear and safe., • Operate, maintain, inspect, and repair SMCMUA vehicles and equipment; such as, changing light bulbs, windshield wipers, fluid and lubrication addition, changing of tires, changing batteries, and related assignments., • Participation in the Treatment System Stand-By Rotation, including TelDacSCADA alarm response., • Related and other duties. Duties, responsibilities, and activities may change at any time with or without notice as directed by SMCMUA Operational needs., • Performs related and other duties, as assigned. This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Functions of this position include work assignments in the ambient atmosphere including extreme cold, hot, wet, or other inclement weather conditions. Qualifications: EDUCATION & EXPERIENCE · U.S. accredited high school diploma or equivalent. Higher level degree or certification preferred in an approved field of study such as that obtained from a vocational or trade school, US military, or college or Associate or Bachelor level degrees in construction technology/management, engineering science, environmental studies, environmental science, chemistry, biology, or other approved program · Treatment and Pumping employees may possess a valid Public Water Treatment Operator license of the appropriate responsibility and applicable position level, depending on the permitted level of the facility, issued by the New Jersey Department of Environmental Protection. · Minimum of three (3) years of experience in operating, adjusting, regulating, repairing, and maintaining pumps, valves, electric motors, and other electrical and mechanical equipment of the type used in water treatment facilities, pumping stations, or filtration facilities LISCENSES & CERTIFICATIONS · Maintenance of a New Jersey Basic Driver’s License. · Employees in Municipal Water Utilities may be required to attend Incident Management training within a specified timeframe as determined by the appointing authority. · Other trainings may include but not be limited to online, courses, or approved alternates. o Small Water System: § 702A Wells § 702B Treatment Plants § 702C Disinfection § 702D Safety and Introduction to Small System Management § 702E Laboratory Procedures o Electrical and Mechanical training Courses as needed and dictated by physical system upgrades and requirements. SKILLS & COMPETENCIES · Knowledge of procedures and methods of operating, adjusting, and regulating water treatment plant pumps, valves, gauges, chemical feed pumps, filters, flowmeters, and other equipment. · Knowledge of methods for determining and maintaining proper flow rates to the distribution system. · Knowledge of the location and function of all equipment related to all SMCMUA facilities. · Knowledge of techniques for collecting water samples and conducting and recording standard chemical and bacteriological analysis of water. · Knowledge of pump and valve packing replacement, motor and pump bearing replacement, and equipment lubrication. · Knowledge of arithmetic operations for determining correct amounts of chemical doses. · Ability to utilize, complete, and assess, various types of electric and/or mechanical maintenance, such as oiling, greasing, cleaning, or replacing gaskets, piping, etc. · Ability to utilize, complete and assess various electrical maintenance such as testing, maintaining, or replacing, RTU/PLC, AC/DC power, basic radio troubleshooting, utilizing multi-meter (voltage/ current), ability to calibrate transmitters, and WQ instrumentation. · Ability to read, write, and understand English so that involved and complicated instructions and technical texts can be read and understood and legible written records can be produced and maintained, such as wiring schematics and development of standard operating procedures. · Ability to understand, remember and carry out oral and written directions; to work independently; to learn quickly from oral and written explanations and from demonstrations; to deal knowledgeably and courteously with co-workers, customers, and the general public. · Ability to utilize information technology for the purposes of performing the functions of this position, including basic knowledge of Microsoft Office. · Ability to work harmoniously with co-workers, supervisors, managers, and the public · Ability to demonstrate understanding and satisfactory compliance of SMCMUA policies, procedures, practices, processes, and essential functions. Company Description: In 1977, the Governing Bodies of Morristown, Morris Township, Morris Plains, and Hanover Township (the Creating Municipalities) passed parallel ordinances creating The Southeast Morris County Municipal Utilities Authority (SMCMUA). SMCMUA provides high-quality drinking water to customers in Morristown, Morris Township, Morris Plains, and Hanover Township with some service in Mendham Township and Harding Township, and to certain customers and municipalities outside its District in Morris County, New Jersey. On a typical day, about 100,000 people rely on SMCMUA's commitment to high quality for their drinking water needs. Equal Opportunity/Affirmative Action: SMCMUA prohibits discrimination based on the following protected categories: race, creed, color, national origin, nationality, ancestry, age, sex/gender, pregnancy, marital status, civil status, domestic partnership status, familial status, religion, affectional or sexual orientation, gender identity or expression, atypical hereditary cellular or blood trait, genetic information, liability for service in the Armed Forces of the United States, and disability. \nCompany Description In 1977, the Governing Bodies of Morristown, Morris Township, Morris Plains, and Hanover Township (the Creating Municipalities) passed parallel ordinances creating The Southeast Morris County Municipal Utilities Authority (SMCMUA). SMCMUA provides high-quality drinking water to customers in Morristown, Morris Township, Morris Plains, and Hanover Township with some service in Mendham Township and Harding Township, and to certain customers and municipalities outside its District in Morris County, New Jersey. On a typical day, about 100,000 people rely on SMCMUA's commitment to high quality for their drinking water needs. Equal Opportunity/Affirmative Action: SMCMUA prohibits discrimination based on the following protected categories: race, creed, color, national origin, nationality, ancestry, age, sex/gender, pregnancy, marital status, civil status, domestic partnership status, familial status, religion, affectional or sexual orientation, gender identity or expression, atypical hereditary cellular or blood trait, genetic information, liability for service in the Armed Forces of the United States, and disability. In 1977, the Governing Bodies of Morristown, Morris Township, Morris Plains, and Hanover Township (the Creating Municipalities) passed parallel ordinances creating The Southeast Morris County Municipal Utilities Authority (SMCMUA). SMCMUA provides high-quality drinking water to customers in Morristown, Morris Township, Morris Plains, and Hanover Township with some service in Mendham Township and Harding Township, and to certain customers and municipalities outside its District in Morris County, New Jersey. On a typical day, about 100,000 people rely on SMCMUA's commitment to high quality for their drinking water needs.\r\n\r\nEqual Opportunity/Affirmative Action:\r\nSMCMUA prohibits discrimination based on the following protected categories: race, creed, color, national origin, nationality, ancestry, age, sex/gender, pregnancy, marital status, civil status, domestic partnership status, familial status, religion, affectional or sexual orientation, gender identity or expression, atypical hereditary cellular or blood trait, genetic information, liability for service in the Armed Forces of the United States, and disability.

Are you ready to join Connecticut Innovation’s vibrant community of innovators? Connecticut Innovations (“CI”) is Connecticut’s strategic venture capital arm, and we are passionate about serving our portfolio of 220+ companies across various industries, with strengths in life sciences, technology, and climate tech. Come join one of our quickly growing portfolio companies,_n! CREW Carbon Overview CREW’s technology and services make wastewater treatment cheaper and more efficient, while permanently sequestering CO₂. Leveraging advanced chemistry, natural minerals, and AI, we’ve developed and are deploying a category-defining process intensification technology, with decarbonization at its core. Today, we help wastewater treatment facilities and operators: • Stabilize pH & alkalinity 24/7, • Eliminate hazardous chemicals & cut costs, • Avoid $100M+ infrastructure upgrades, • Capture & Store CO2 We are currently deploying this technology across the US and Europe. In addition, we’ve signed $30M+ in carbon removal offtake agreements with leading corporations looking to meet their climate goals, supercharging geographical CREW’s expansion. CREW has offices and labs in New Haven, CT and offices in Brooklyn, NY. We are funded by Counteract, ReGen, Ponderosa, Connecticut Innovations and others. We've secured large contracts with the premier buyers of carbon credits through the Frontier Climate Fund (Stripe, Shopify, Autodesk, McKinsey, among others) and have been selected by the Department of Energy as one of the few potential suppliers of high-quality carbon credits to the federal government. About The Role We are looking for an experienced Technical Operations Lead to oversee the team, systems, and processes that take CREW’s deployments from signed contract to reliable, long-term operation at wastewater treatment plants nationwide. This person leads the engineers, project managers, and field staff responsible for designing, procuring, building, installing, and maintaining our fleet — ensuring every deployment is robust, on budget, and on schedule. This role blends technical judgment with operational leadership: technical fluency to hold designs and vendors to a high standard, paired with the operating discipline to run a distributed, multi-site deployment pipeline well. As the fleet grows, this person will also help shape the future of our deployments — improving controls, standardizing our approach, and informing strategy. The ideal candidate is a hands-on operator who has led a distributed field service, deployment, or fleet operation before, is comfortable owning cost and schedule as business outcomes, and is energized by building the operating backbone of a fast-growing water technology company. This position is a full-time role. Location is onsite at CREW’s Brooklyn, NY office. Remote considered only for exceptional candidates, with regular travel to Brooklyn expected. Deployment Execution & Team Leadership • Lead the cross-functional team (engineers, project managers, field technicians) that takes projects from kickoff through design, procurement, build, install, and commissioning to steady-state operation., • Own cost and schedule discipline across every phase of the deployment pipeline., • Set the operating rhythm, processes, and metrics that keep multiple simultaneous site deployments on track. Technical Oversight, Reliability & Design Standards • Ensure our systems (tanks, silos, controls) are robust and field-proven., • Manage relationships with design consultants, fabricators, skid builders, and contract manufacturers., • Own reliability engineering and failure analysis as a program: set targets (MTBF, MTTR, asset life), and ensure field issues (pressure, flow, mechanical failures) are root-caused and converted into updated design standards and next-generation requirements — whether executed personally or through an engineer on the team., • Establish and maintain engineering standards, technical documentation, commissioning procedures, and change-control processes to ensure consistency across all deployed systems., • Push toward designs and vendor choices that make systems easier to deploy, service, and scale cost-effectively — without over-engineering. Fleet Management & Distributed Operations & Maintenance • Build and run the systems, processes, and team that keep a growing, geographically distributed fleet operating reliably., • Own preventive maintenance programs, remote monitoring and troubleshooting, and field service dispatch., • Track and report fleet uptime, reliability, and service cost as core operating metrics. Strategic Growth • As the operation matures, take on more of CREW’s strategy and long-term deployment roadmap — standardizing what’s working and identifying where to invest next., • Partner with commercial, supply chain, and finance to keep delivery targets, unit economics, and field performance aligned. Background • 10+ years leading teams (engineers, project managers, and/or field staff) that design, build, and operate physical equipment deployed across many sites — water/wastewater is preferred., • BS in Mechanical, Civil, Environmental, or Chemical Engineering (or equivalent hands-on technical background)., • Track record standing up or scaling a distributed operation — field service, deployment, or O&M — for physical equipment across many sites., • Experience managing vendor and consultant relationships for hardware, design, fabrication, or consumables., • Comfortable owning cost and schedule as a business outcome., • Strong organizational and project management skills, with the ability to run multiple sites, vendors, and priorities at once., • Product or strategic thinking a strong plus — this role grows into shaping the future of our deployments., • Comfortable working in a fast-paced, early-stage, or evolving company environment., • Able to travel 20-40%., • PE license a plus, not required., • You practice extreme ownership (no task is too small)., • You love being in the trenches with your team and working with high empathy., • You have a growth mindset. Compensation Compensation at the time of offer is unique to each candidate and based on a variety of factors such as skill set, experience, qualifications, and work location. Salary is one part of the total compensation and benefits package. Other benefits for eligible employees may include: equity through the form of option grants, flexible paid time off, 401(k) plan, well equipped office environment, and health benefits offerings. The expected base salary range for this role is $120,000–$180,000. This range represents the company’s estimate for this position at the time of posting however actual compensation may vary based on skills, experience, location, role scope, and business needs. CREW Highlights • Raised $25M of funding in January 2026, • Deployed at nearly 10 wastewater treatment facilities across the US and Europe, including leading utilities like HRSD (Hampton Roads Sanitation District), • Delivered measurable performance improvements at wastewater treatment facilities, with one utility considering deferring $400 million in planned capital upgrades, • Secured $33+ million in carbon removal offtake agreements with Frontier Climate Fund in 2024, • Captured 2,000+ tons of CO2 faster and more cost effectively than other carbon removal credit suppliers, • Won a $2.3 million award from the Colorado Energy Office as part of the state’s Clean Air Program in February 2026, • Selected as 1 of 24 companies by the US Department of Energy in 2024 to be a potential supplier of high-quality carbon credits to the federal government, • Developed proprietary measurement, reporting, and verification (MRV) capabilities that enable high-confidence carbon removal quantification CREW Carbon is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We have strict wage minimums, generous benefits, and personal leave policies. Our goal is to provide safe, rewarding, and empowering work environments for all who interact with our company.

About Piñata Piñata is on a mission to make renting rewarding. We turn rent — the largest recurring payment in most people's lives — into credit building, rewards, and access to financial services that renters have historically been shut out of. We're embedded across the property-management ecosystem, integrated with the platforms that power millions of units, and today we reach more than two million renters. Our marketplace connects those renters with the brands they need at the moments they spend most: lease signing, move-in, and renewal. We already work with 64+ brands, and we're hiring the leader who will bring in the next wave. The Role We're hiring an Independent Brand Partnerships Lead to source, pitch, and close new brand partners for the Piñata marketplace. This is a net-new revenue role built for a senior operator with a deep network: you bring the relationships, we bring the audience, the product, and the deal infrastructure. It is also a different kind of seat. The role is commission-only, aggressive commission with no cap and no set hours. You decide how and when you work, and you earn a meaningful share of the revenue you create. It suits someone who has already built a career in brand partnerships and wants ownership and flexibility over a salary and a schedule. What You'll Own • Pipeline — a qualified pipeline of consumer brands across the categories renters care about: retail and grocery, memberships, streaming, home and moving services, utilities setup, pet, education, and financial services., • Closed partnerships — signed brand deals, from first conversation through executed order form., • Brand revenue — the revenue those partners generate through CPA and referral programs, brand-funded offers, and sponsored placements., • Relationships — the senior relationship at each brand you bring in, as the partnership launches and grows. What You'll Do • Open doors with the people who own loyalty, membership, and partnerships budgets at major consumer brands., • Pitch Piñata as an acquisition and loyalty channel, using partner-specific landing pages we build for your meetings., • Structure deals on our standard order form and published Brand Partner Terms, so they close without a long legal cycle., • Hand signed partners to our team for launch, and stay close to the account as it expands., • Work directly with the CEO on priority accounts and bring her into the meetings that matter. Who You Are • 8+ years in brand partnerships, business development, loyalty, affiliate, or retail media, with a network you can actually call., • A track record of closing partnerships with consumer brands. You've owned the number, not just the introduction., • A self-directed operator who runs your own pipeline without a manager checking it., • Commercially sharp: you can structure a deal that works for the brand, for Piñata, and for the renter., • Motivated by upside and autonomy, and comfortable with pay tied entirely to results. Bonus Points • Existing relationships in membership, grocery, streaming, home services, or consumer fintech., • Experience with loyalty programs, card-linked offers, affiliate networks, or rewards marketplaces., • Familiarity with proptech or the renter audience. Compensation & Structure • Aggressive commission., • No cap on earnings., • Independent contractor (1099).

Job Description H&H is hiring a mid-level CADD Highway/Roadway/Stormwater Designer to join our New York, NY office. The CADD Designer will work closely with CADD Manager, Project Managers, Engineers and others to support project teams throughout the company on proposals, planning, and design tasks. H&H is a nationally recognized, full-service infrastructure engineering firm delivering innovative solutions that move communities forward. With more than 139 years of experience and over 600 professionals across 32 offices nationwide, we combine deep technical expertise with the agility of a privately owned firm. From planning and design through construction, we manage the full project life cycle while continually advancing our capabilities, strengthening our national presence, and investing in the people who power our growth. At H&H, you’ll join a firm that is building on its legacy by aligning expertise, expanding opportunity, and positioning itself for long-term, sustainable growth. Responsibilities • Collaborate with engineers and the design team to advance and complete a variety of project types, including roadway, bridge, and drainage, • With limited supervision, produce 2D and 3D models and drafting of civil transportation plans using the latest version of either Microstation or AutoCAD drafting software in accordance with company and client standards, • Develop highway and roadway infrastructure projects with plans, profiles, superelevation transitions, and cross sections, • Produce conceptual and final construction design plans for utilities, grading, and stormwater, • Use 3D modeling for roadways, drainage, and grading designs, • Coordinate with complementary disciplines at a project level, which may include members of the structural, electrical, mechanical, and architectural team, • Support design services during construction activities, • Produce models for calculating construction quantity takeoffs and creating spreadsheets that summarize estimated quantities, • Assist junior engineers and professionals., • Opportunity to develop and mentor civil team of designers Requirements • Five+ years of experience as a civil designer or CADD operator, • Associate or Bachelor's degree in a related field (preferred), • High school graduate, technical degree in BIM/CAD software (preferred), • Proficient in AutoCAD Civil 3D, MicroStation InRoads / GeoPAK, and OpenRoads Designer, • Experience in:, • Various infrastructure project types: Drainage, Roadway, Utilities, • Developing and supporting engineering drawings, • File conversion and file management between multiple digital environments, • Familiar with or able to quickly learn the following guidelines/standards:, • AASHTO Highway Design Guide, NYSDOT Highway Design Manual, NYSDOT Bridge Design Manual, MUTCD, NYCDOT standards, NYCDEP standards, and other related standards, • Strong analytical and problem-solving skills with the ability to identify and prioritize tasks in a logical order, verbal communication, and time management skills Benefits Salary range — $65,000-$75,000 annually. Salary commensurate with level of experience. We offer a professional work environment, a competitive salary, a benefits package, and 401(k). EOE M/F/DISABILITY/VETS

Job Description Employment Type: Full-Time FSLA: Salary/Exempt Division: Arch Energy Department: Arch Energy Reports to: VP of Power and Energy Supervisory Duties: Yes Salary Range: $152,000 - $211,000 Arch Energy is seeking a hands-on engineering leader to guide utility-scale solar, battery energy storage, substation, and grid interconnection projects from pursuit through commercial operation. This role combines technical depth, practical EPC judgment, field engagement, and strong commercial awareness. The successful candidate will build repeatable engineering practices, lead external Engineers of Record (EORs), and help project teams deliver safe, constructible, reliable, and contract-compliant facilities. Responsibilities / Essential Functions • Direct technical strategy and design delivery from site diligence, basis of design, and bid development through 30/60/90% reviews, Issued for Construction (IFC) design packages, construction support, commissioning, and turnover., • Lead integration of Battery Energy Storage Systems (BESS), including battery enclosures, Power Conversion Systems (PCS), medium-voltage (MV) skids, Battery Management Systems (BMS), Energy Management Systems (EMS), Power Plant Controllers (PPC), Supervisory Control and Data Acquisition (SCADA) systems, fire and life safety systems, controls, networking, warranties, and performance guarantees., • Oversee physical and Protection and Control (P&C) scope for collector substations, switching stations, and generation tie lines (gen-ties), including Air-Insulated Switchgear (AIS), Gas-Insulated Switchgear (GIS), transformers, grounding, control buildings, protection schemes, metering, telecommunications, Remote Terminal Units (RTU), SCADA, testing, and energization., • Lead multidisciplinary reviews of civil, geotechnical, structural, electrical, controls, communications, fire protection, site logistics, temporary works, quantities, interfaces, and constructability., • Develop scopes, fees, schedules, deliverables, design responsibility matrices, and interface registers for EORs, utilities, owner engineers, original equipment manufacturers (OEMs), and specialty consultants., • Partner with estimating, procurement, operations, quality, and commissioning teams to validate design maturity, quantities, assumptions, exclusions, contingencies, long-lead strategies, release priorities, and technical risk., • Support business development through site walks, proposals, and client presentations. Translate technical findings into clear recommendations, qualifications, and project development opportunities., • Create design criteria, standard details, specifications, review checklists, preferred-product strategies, and lessons learned. Optimize total installed cost without compromising safety, reliability, performance, maintainability, warranty, or compliance., • Maintain a strong site presence through investigations, first-work inspections, QA/QC and constructability walkthroughs, pre-energization reviews, commissioning-readiness assessments, and punch-list creation and closure., • Support Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), relay and controls testing, point-to-point checks, utility telemetry, integrated systems testing, and performance verification., • Translate EPC agreements, interconnection requirements, owner specifications, permits, OEM requirements, and codes into executable project requirements., • Lead technical negotiations involving scope, deviations, warranties, guarantees, change management, and design-risk allocation. Key Skills • Engineering leadership across utility-scale solar, Battery Energy Storage Systems (BESS), substations, and grid interconnection projects., • Deep knowledge of BESS integration, including PCS, BMS, EMS, PPC, SCADA, controls, networking, commissioning, warranties, and performance guarantees., • Strong understanding of substation design, Protection and Control (P&C), relays, metering, telecommunications, SCADA, RTUs, grounding, testing, and energization., • Ability to identify scope gaps, constructability issues, interface risks, and technical compliance concerns before construction., • Experience translating complex technical requirements into practical, executable solutions., • Strong contract review, negotiation, risk management, and stakeholder management skills., • Working knowledge of utility communication and control systems, including Human Machine Interface (HMI), Distributed Network Protocol (DNP3), Modbus, and Inter-Control Center Communications Protocol (ICCP)., • Excellent communication and collaboration skills with owners, utilities, EORs, OEMs, preconstruction teams, and field operations. Required Experience • Bachelor’s degree in Electrical, Mechanical, Civil, Structural, or related Engineering; Electrical Engineering preferred., • 10+ years of progressive engineering and EPC delivery experience in utility-scale solar, BESS, substations, transmission/interconnection, or related power infrastructure., • At least five years leading multidisciplinary engineering teams and external EORs across multiple concurrent pursuits and projects., • Demonstrated responsibility for projects from feasibility and bid phase through IFC, construction, energization, commissioning, performance testing, and turnover., • Hands-on experience supporting site investigations, QA/QC walkthroughs, commissioning-readiness reviews, and project closeout activities., • Strong technical and contractual negotiation experience involving EPC contracts, engineering scopes, equipment agreements, specifications, warranties, performance guarantees, and change management., • Working knowledge of applicable utility and Authority Having Jurisdiction (AHJ) requirements, as well as the National Electrical Code (NEC), National Electrical Safety Code (NESC), NFPA 70E, NFPA 855, UL 9540/9540A, IEEE, International Building Code (IBC), and ASCE 7., • Proficiency with Microsoft 365, Procore or comparable platforms, Bluebeam, and AutoCAD review workflows; familiarity with PVsyst, PVcase, or similar tools., • Professional Engineer (PE) license preferred., • Experience with utility-scale EPC contractors, Independent Power Producers (IPPs), utilities, OEMs, or multidisciplinary engineering firms preferred., • Experience with 100 MW+ solar facilities, 100 MW / 400 MWh+ BESS projects, and 115-345 kV substations or switching stations preferred., • Experience in ISO New England (ISO-NE), New York Independent System Operator (NYISO), PJM Interconnection (PJM), or similar utility markets preferred.

Job Description Our client, a growing operator of mission-critical facilities based in NYC is seeking a Senior Automation & Controls Engineer to support the design, implementation, and ongoing reliability of industrial control and facility automation systems. This individual will serve as a technical leader for operational technology (OT) infrastructure, helping ensure the availability, performance, and security of critical building systems across a multi-site environment. The role combines hands-on engineering, troubleshooting, project execution, and lifecycle management responsibilities, partnering closely with facilities, operations, engineering, and technology teams. Key Responsibilities Automation & Controls Engineering • Design, implement, and maintain industrial control and automation systems supporting critical facility operations., • Configure and support PLCs, HMI platforms, SCADA systems, and related monitoring technologies., • Develop and maintain control logic, alarm strategies, system integrations, and communications architectures., • Troubleshoot hardware, software, and network-related issues impacting facility automation systems., • Support system upgrades, commissioning activities, and modernization initiatives. Operational Technology Infrastructure, • Manage OT networks and communications supporting controllers, field devices, and supervisory systems., • Support industrial communication protocols such as Modbus, BACnet, OPC-UA, MQTT, and related technologies., • Maintain system documentation, network diagrams, configuration backups, and asset inventories., • Monitor system performance and identify opportunities to improve reliability, resilience, and operational efficiency. Critical Facility Systems, • Support automation platforms associated with electrical, mechanical, and environmental infrastructure., • Assist with integration and monitoring of power, cooling, and building systems., • Partner with facilities teams to optimize operational performance and system availability., • Participate in root cause analysis and corrective action efforts following operational incidents. Cybersecurity & Compliance, • Support implementation of cybersecurity controls within OT environments., • Assist with vulnerability remediation, access management, and system hardening activities., • Maintain compliance with applicable internal standards and industry best practices., • Participate in incident response and business continuity planning efforts. Project Delivery & Continuous Improvement, • Support new facility deployments, expansions, and infrastructure enhancement projects., • Participate in factory acceptance testing (FAT), site acceptance testing (SAT), commissioning, and operational handoff activities., • Develop and maintain engineering standards, templates, and best practices., • Evaluate emerging technologies and recommend solutions that improve reliability, visibility, and operational effectiveness. Qualifications Required, • 5 years of experience in controls engineering, industrial automation, operational technology, or related disciplines., • Experience supporting industrial, manufacturing, critical facilities, utilities, energy, or similar operational environments., • Hands-on experience with PLC, HMI, SCADA, or building automation platforms., • Knowledge of industrial networking concepts and communication protocols., • Strong troubleshooting and root cause analysis capabilities. Preferred, • Experience supporting multi-site operations., • Familiarity with OT cybersecurity principles and industry standards., • Exposure to power monitoring, facility automation, or infrastructure management platforms., • Experience participating in commissioning and large-scale infrastructure projects., • Industry certifications related to controls, automation, networking, or cybersecurity.

Job Description Heavy Equipment Operator (Class A CDL) Mikula Contracting, Inc. | Clifton, NJ | Full-time | $32 to $38 per hour Who we are: Mikula Contracting is a family-owned excavation, demolition, and environmental contractor serving New Jersey since 1946. What you'll do • Operate excavators, loaders, backhoes and dozers safely and efficiently., • Dig, trench, backfill, grade, and load and move material on excavation, site-work, demolition, and environmental jobs., • Work to stakes and grade marks and follow hand signals from the crew., • Make sure underground utilities are located and marked before any digging., • Drive tandem dump trucks and haul material and equipment as needed., • Do daily equipment checks, greasing, basic maintenance and minor repairs, and report problems right away., • Work as a team with laborers, drivers, and foremen, and speak up about anything unsafe. What you bring • A current Class A CDL., • Hands-on experience running heavy equipment in excavation, site work, or demolition., • At least 1 year of experience driving tandem dump trucks., • A working knowledge of equipment, job-site safety, and the terms used on the job., • Good communication and a team-first attitude. Physical requirements • Climb on and off equipment and trucks using three points of contact., • Operate controls for long periods in a vibrating cab., • Work outdoors in all weather, on uneven ground, around dust and loud noise, wearing required protective gear., • See and hear signals, alarms, and traffic around the machine. We provide reasonable accommodation to qualified applicants and employees as required by law. As a Class A CDL position, this job is subject to U.S. DOT drug and alcohol testing. Pay and benefits • $32 to $38 per hour, based on experience and qualifications, • 401(k) with company match, • Medical benefits, • Paid time off How to apply: Email your resume or a short note about your equipment experience and licenses to our office. Equal opportunity: Mikula Contracting, Inc. is an equal opportunity employer. We consider all qualified applicants without regard to race, creed, color, religion, national origin, ancestry, nationality, sex, pregnancy, sexual orientation, gender identity or expression, marital, civil union or domestic partnership status, age, disability, genetic information, military or veteran status, or any other characteristic protected by law. Veterans are encouraged to apply. \nCompany Description Mikula Contracting, Inc., a family-owned and operated business, has been servicing all of New Jersey for 80 Years. We provide commercial and residential customers with various excavation, demolition, environmental, trucking, and soil materials services. We continually expand our clientele while improving our business every day. Throughout the years, Mikula Contracting has withstood the many challenges the volatile construction industry has faced while continuing to grow. Mikula Contracting, Inc., a family-owned and operated business, has been servicing all of New Jersey for 80 Years. We provide commercial and residential customers with various excavation, demolition, environmental, trucking, and soil materials services. We continually expand our clientele while improving our business every day. Throughout the years, Mikula Contracting has withstood the many challenges the volatile construction industry has faced while continuing to grow.

Job DescriptionJob Title: Principal Power Systems Engineer – Grid Integration & Power Electronics Location: Remote, Canada or United States; preference for candidates based in Canada Employment Type: Full-time Reports To: President Travel: Occasional North American and international travel Compensation:$175,000–$215,000 USD annual base salary for U.S.-based candidates. Compensation for Canada-based candidates will be adjusted to CAD based on location, experience, and qualifications. Benefits: Medical, dental, and vision coverage; retirement plan with company contribution; PTO and holidays; professional-development support; stock ownership opportunity Job Summary Our Client is an engineering and energy consulting firm supporting utilities, renewable-energy developers, investors, government agencies, and other power-sector clients. Since 2011, our client has supported more than 180 GW of clean and renewable energy projects. We are seeking a Principal Power Systems Engineer to serve as a senior technical and client-facing leader. This role will lead complex grid interconnection, transmission planning, renewable and battery-storage integration, inverter-based resource (IBR), and reliability studies while mentoring engineers and supporting client growth. Essential Duties and Responsibilities • Lead complex power-system, interconnection, transmission, renewable, storage, IBR, power-quality, and grid-compliance studies., • Establish study methodology, assumptions, modeling approaches, and quality standards., • Review, validate, and troubleshoot models and serve as a final technical reviewer., • Lead RMS and EMT modeling, validation, and IBR performance assessments., • Present and defend technical findings to clients, utilities, ISO/RTOs, and other stakeholders., • Manage key client relationships, project scope, schedules, and technical deliverables., • Mentor engineers and review technical work., • Support proposals, scopes, fee estimates, and business development., • Stay current on FERC, NERC, IEEE, ISO/RTO, utility, and Canadian grid requirements. Required Qualifications • Bachelor’s degree in electrical engineering, power systems, or a related engineering discipline., • 8+ years of U.S. and/or Canadian power-sector experience, including senior or technical leadership responsibilities., • Strong experience with IBR modeling, grid integration, and complex power-system studies., • Advanced proficiency in at least two platforms such as PSCAD/EMTDC, PSS/E, GE PSLF, ASPEN, MATLAB/Simulink, or PowerGEM TARA., • Experience with RMS and EMT modeling and model validation., • Strong client-facing experience and ability to defend technical work before external stakeholders., • Experience mentoring engineers and managing project scope, budget, and schedules., • Strong written and verbal communication skills., • Authorization to work in the U.S. or Canada, or ability to obtain authorization through employer-sponsored immigration support. Visa sponsorship is available for the right candidate. Preferred Qualifications • Master’s, M.Eng., or Ph.D. in electrical engineering, power systems, or a related field., • PE, P.Eng., or progress toward professional licensure., • Experience with ISO/RTO interconnection queues and grid requirements., • Experience with grid-forming inverters, weak-grid conditions, renewable-plus-storage, or large-load/data-center interconnections., • Knowledge of NERC, IEEE 1547, IEEE 2800, FERC, and Canadian operator requirements., • Programming or automation experience with Python, C++, MATLAB, Excel VBA, R, or similar tools., • Proposal development, regulatory, technical advisory, or business-development experience. Work Environment / Schedule • Fully remote within the U.S. or Canada., • Collaboration across North American time zones., • Occasional domestic and international travel., • Valid passport and ability to travel across the U.S.–Canada border, as legally permitted. Compensation and Benefits • $175,000–$215,000 base salary., • Medical, dental, and vision coverage., • 401(k) with company contribution for U.S. employees or Group RRSP for Canadian employees., • PTO and company holidays., • Professional licensure and continuing-education support., • Stock ownership opportunity, subject to eligibility and vesting terms. EEO Statement We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected characteristic under applicable federal, state, or local law.

Job Description The Role Following Madison's groundbreaking Community Infrastructure announcement to develop 1 GW and mobilize up to $2 billion in capital, we are seeking to make a critical hire to own the company's strategy and engagement with key industries and government bodies, specifically business leaders, legislators, regulators, agencies, and their staff, driving federal, regional, and local policy. As part of our Community Infrastructure announcement, we defined a new goal to Build Here. Benefit Here, whereby we partner with local communities, utilities, government agencies, and other stakeholders to listen to their concerns with power/data center development and develop our projects in ways that benefit local communities. Reporting to the Chief Revenue Officer and working closely with Madison's Senior Leadership Team, the Senior Director, Government Affairs will oversee the company's policy and political strategies and execution, lobbying, and partnerships with business and government leaders to deliver on our commitment to strengthen communities and bring distributed energy infrastructure to scale amid surging power demand. Responsibilities Build the strategic roadmap and establish relationships with government to execute • Build the company's policy and political roadmap to advance our mission to modernize energy for industries and communities, where it matters most, • Create and enable strategic partnerships with government and government-adjacent leaders and organizations, including legislators, regulators, chambers of commerce, and other business-oriented groups, • Cultivate and maintain relationships with legislative and agency staff at the federal, state, and local levels, • Track and shape legislative and regulatory developments affecting energy infrastructure and data centers, • Represent Madison in industry coalitions, trade associations, and policy working groups Partner with AI research labs and data center developers • Own policy strategy for hyperscaler, AI research lab, and data center developer engagement on power procurement, siting, and interconnection issues, in coordination with our commercial and development teams, • Set the policy playbook for commercial teams pursuing large-load and co-location opportunities Drive growth and collaboration • Partner with commercial teams to identify and de-risk policy-dependent deal opportunities, • Brief the Senior Leadership Team and Board on policy risks, opportunities, and legislative outlook, • Manage political giving and PAC strategy in coordination with Legal, • Coordinate with Marketing on public narrative and messaging tied to policy positions Qualifications Required • Ability to cultivate relationships with key players across business, technology, and government, • Proven track record of partnering with government leaders to advance high-impact policy and/or legislation, • 8+ years of experience in government affairs, public policy, or related roles, ideally within energy, infrastructure, or technology, • Excellent written and verbal communication skills, with the ability to translate policy complexity for internal and external audiences Preferred • Experience managing political giving and/or PAC strategies, • Experience in commercial and industrial distributed generation, battery storage, or related clean energy sectors, • Advanced degree, • Existing relationships with policymakers in Washington, D.C. and key state capitals What We Value • Entrepreneurial mindset with a strong sense of ownership and accountability, • Commercial lens on partnership cultivation, • Equally comfortable shaping and executing strategy, • Intellectual rigor and attention to detail Benefits • PTO and company holidays, • Medical, dental, vision, • Employer-paid short-term disability, long-term disability, life insurance, • 401(k) and company match, • Professional development stipend, • Strong culture of collaboration, performance, and personal growth $185,000 - $225,000 a year The actual salary offered may vary depending on job-related factors including, but not limited to knowledge, skills, experience and location. How We Work At Madison Energy Infrastructure, we believe in the power of clean energy infrastructure to drive real impact—for our customers, our partners, and the communities we serve. We've quickly emerged as a preeminent developer, investor, and operator of distributed generation, helping organizations across sectors meet their energy goals with certainty, speed, and trust. Our robust portfolio consists of over half a gigawatt of clean energy infrastructure projects across more than 25 states. We're building a team that thrives on ownership and ambition. As we expand into direct, end-to-end services for Fortune 500 companies, public entities, and nonprofits alike, we rely on collaborative thinkers who bring structure to complexity, energy to execution, and curiosity to every challenge. Our environment is fast-paced and outcome-oriented—but grounded in the belief that how we work together matters as much as what we deliver. If you're excited to shape the future of clean energy and be part of a high-performance, high-integrity team, we'd love to meet you. Madison Energy Infrastructure is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Job Description Spark Car Wash is a high growth, institutionally backed express exterior car wash company serving the Northeast. Spark is growing fast and plans to open a significant number of modern car wash locations throughout NJ, NY, and PA. Spark’s success is driven by a relentless focus on making the car wash an energizing experience for all, delivering a consistently excellent experience for customers and creating an enriching environment for employees. Guided by our values, Spark’s vision is to become the largest car wash operator in the region and the premier car wash brand in the market. Position Summary As a Construction Manager, you’ll lead the execution of new build and renovation projects from permitting through grand opening. You’ll oversee multiple sites simultaneously across PA, NJ, and NY, ensuring each location is delivered on time, on budget, and up to Spark standards. This is a high-impact role for someone who thrives in a fast-paced environment and is passionate about building high-quality retail spaces. You’ll report to the Director of Construction. This role is considered a hybrid role with regular travel to store locations across the Northeast, occasional in-office presence, and offers the flexibility to work remotely with manager approval. Essential Functions Project Management & Execution • Manage ground-up and renovation projects from pre-construction through closeout., • Drive permitting, scheduling, budgeting, bidding, site visits, and weekly GC-owner meetings., • Serve as the day-to-day job site lead for Spark, ensuring quality and timeline adherence., • Coordinate construction trades (civil, structural, MEP, equipment installation). Budget & Timeline Ownership • Manage budgets and schedules in line with company goals., • Proactively control costs, manage change orders, and resolve field issues. Vendor & Contractor Oversight • Lead RFP and bidding processes., • Evaluate contractor performance, enforce safety/quality standards, and manage contracts. Cross-Functional Collaboration • Support Real Estate with site feasibility reviews and utility access., • Coordinate with Operations, Facilities, and Finance teams for seamless execution., • Manage utilities and permitting with municipalities. Documentation & Reporting • Track budgets, schedules, as-builts, and site progress., • Provide consistent updates to the Director of Construction and leadership team. Standards & Continuous Improvement • Uphold Spark’s construction and brand standards., • Lead punch walks, turnover, and post-opening reviews., • Help develop SOPs and a construction playbook to scale growth Requirements • Bachelor's degree in Construction Management, Civil Engineering, Construction Engineering, or a related field., • 5+ years experience in retail, restaurant, hospitality, or automotive construction., • Proven success managing multiple, simultaneous projects across geographies., • Deep knowledge of permitting, utilities, site development, and GC oversight., • Strong financial and scheduling skills., • Proficiency in Procore, Smartsheet, MS Project, or equivalent tools., • Comfortable reading and interpreting full plan sets (architectural, civil, MEP)., • Valid driver’s license and ability to meet the company’s Motor Vehicle Record (MVR) eligibility requirements. Physical Job Requirements • Regularly perform physical activities including walking, standing, bending, and moving through out car wash sites., • Ability to remain on feet for extended periods while conducting store visits and engaging with employees., • Work in a field environment with exposure to varying weather conditions during site visits., • Ability to occasionally move or lift standard office materials (up to 20 pounds). Travel Requirements • Frequent travel to Spark Car Wash locations throughout NY, NJ, and PA., • Primarily local travel by company vehicle expected 75% of the time., • Limited overnight travel expected less than 25% of the time. Benefits • Competitive base pay salary plus annual performance bonus, • Comprehensive health benefits including medical, dental, and vision coverage, • Retirement plan with 4% company match, • Three weeks paid time off plus company recognized holidays, • Company fleet vehicle (authorized for personal commuting), • Company laptop and branded gear, • Free car washes at any Spark location

Job Description Summary: Esposito Construction is seeking an Equipment Operator with field experience for various job sites across the state. Candidates must have experience running loaders, dozers, excavators and various other machines. Candidates must also have knowledge of site work, earth moving, and utilities installation. Experience with pipe and/or utility work is a plus. We are seeking someone who is motivated, hands-on, self-starter with a proven track record. Benefits: • Medical Insurance paid by Esposito Construction for single rate., • 401(k) eligibility with company contribution., • Dental insurance eligibility., • Vision insurance eligibility., • Paid time off., • Pay: Flexible, experience based $25-40 DOE Responsibilities: • Operate heavy machinery for excavation, trenching, and backfilling on underground utility and heavy civil projects, • Dig and prepare trenches for water, sewer, storm, and other pipe installations, including working safely around existing utilities, • Load, move, and place dirt, gravel, and other materials as needed to support pipe installation and site work, • Assist in assembling, laying, and connecting pipe systems in trenches according to project specifications, • Coordinate with subcontractors and crew members to ensure smooth workflow and timely completion of tasks, • Stage and manage equipment and materials on-site to keep operations running efficiently, • Provide input for daily and weekly reports, including progress, material usage, and equipment operation, • Follow strict safety protocols, maintain trench safety, and contribute to a culture of safety awareness on every job Qualifications: • Must be able to work in team setting, • Pipe experience preferred but not required, • Physically capable to work on your feet and lift/move material productively, • Must have a good pair of work boots, • OSHA 10 and/or 30 Preferred Esposito Construction LLC is an Equal Opportunity-Affirmative Action Employer Minority / Female / Disability / Veteran / Gender Identity / Sexual Orientation / Age

Job Description CoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at www.coreweave.com. About the Team The Global Data Center Operations team serves as the backbone of our infrastructure, ensuring the seamless performance of our global hyperscale environment. Operating in a high-stakes, 24/7 setting, this team is responsible for safeguarding the availability, stability, and reliability of mission-critical systems that power our most essential services. As a Facilities Command Center Engineer, you bring facilities engineering judgment to mission control for our global data center fleet. Where a site engineer owns one building, you see every building at once. You will conduct structured remote rounds across every site we operate using BMS, EPMS, DCIM, and every other telemetry source available to us, and when something looks wrong, you are the person who works out what it means. Our telemetry is not always timely or clean, and not every alarm has a runbook. This role exists for those moments. You will read one-line diagrams and sequences of operation, diagnose electrical, mechanical, and fire protection events from incomplete data, decide whether and where to send people, and make sure work in the field is safe and authorized before it starts. This is a remote engineering role performed from the Command Center. You will not be turning wrenches, but you need to understand the equipment as if you had, because the person turning the wrench is relying on your call. Key responsibilities: Diagnose moderate-to-high complexity issues across electrical, mechanical, and fire/life safety systems using telemetry, one-line diagrams, P&IDs, sequences of operation, and equipment documentation. Make the call when no runbook fits: assess risk to production, decide whether to dispatch, and direct the first response within defined limits. Review work requests, MOPs, and change records submitted by site teams and vendors for safety and operational compliance before work is authorized. Conduct scheduled remote rounds each shift, reviewing and recording the health of electrical, mechanical, and fire/life safety systems across the fleet. Monitor critical assets including UPS systems, standby generators and fuel systems, switchgear, PDUs, battery plant, chillers, CRAH/CRAC units, cooling towers, pumps, air handlers, and fire suppression systems. Baseline normal operating conditions, trend performance across sites, and identify drift and early-warning signatures before they become events. Serve as first responder for infrastructure alarms, triaging incidents and initiating response per SOPs, MOPs, and EOPs. Escalate to on-site operations, engineering teams, and leadership based on defined escalation matrices, with a clear technical assessment attached. Coordinate incident response across multiple teams and sites, and remotely support on-site technicians, vendors, and contractors during events and planned maintenance. Write and correct operating procedures based on what you see across the fleet, and feed lessons learned back to site leadership. Act as technical lead on root cause analysis, providing timelines, alarm histories, and an engineering read of what failed and why. Coach Command Center Technicians on your crew and help them build the facilities depth to grow into this role. Maintain detailed event logs and lead structured shift handovers to keep operations continuous across crews. Work Schedule: Our Command Center operates 24/7/365. You will be assigned to a day or night crew. Shift: 12.5 hours, including a 30-minute handover overlap at each end of the shift. Rotation: A fixed two-week repeating pattern (2-2-3) with every other weekend off. Depending on crew assignment, you will work either: Sunday, Wednesday, Thursday in week one; Monday, Tuesday, Friday, Saturday in week two, or Monday, Tuesday, Friday, Saturday in week one; Sunday, Wednesday, Thursday in week two. Cycle: Three scheduled shifts in one week and four in the next, repeating. You will never work more than four shifts in a single week. Night differential: Night crew assignments are paid a 10% shift differential. Holidays: The Command Center is staffed on holidays. Holiday coverage is part of the rotation. Handover: Every shift begins and ends with a structured handover. Punctuality is a safety requirement, not a preference. On-site presence: This role is performed from the Command Center and requires on-site presence for the duration of each shift. This is a salaried, exempt position. Qualifications: 4+ years of experience operating or maintaining critical facilities: data centers, utilities and power generation, hospitals, semiconductor fabs, or industrial plants. Hands-on background in electrical systems (UPS, switchgear, generators, ATS/STS, batteries) or mechanical systems (chillers, CRAH/CRAC, cooling towers, pumps, controls), with working knowledge of the other. Ability to read and reason from one-line diagrams, P&IDs, and sequences of operation. Proven experience writing, reviewing, and executing SOPs, MOPs, and EOPs in high-availability environments. Experience making operational decisions under pressure with incomplete information, and explaining the reasoning afterward. Ability to interpret telemetry, trend data, and alarm behavior to separate real risk from noise. Strong written communication. Much of your work product is the written record of what happened, why, and what to change. Ability and willingness to work 12.5-hour shifts on a fixed two-week rotating pattern, including weekends, holidays, and nights if assigned to a night crew. Work is performed in a climate-controlled Command Center, primarily seated at a multi-monitor operator workstation. Preferred Skills: Bachelor's degree in Electrical or Mechanical Engineering, or equivalent military technical training (for example, Navy nuclear or marine engineering programs). Experience as a data center facility engineer, critical facilities engineer, or chief engineer in a hyperscale or colocation environment. Stationary engineer, electrical, or HVAC trade license. Data center operations certifications such as CNet CDCTP or Uptime Institute AOS/ATD. Familiarity with specific BMS, EPMS, and DCIM platforms. Experience in a centralized Command Center, Facility Operations Center, or NOC supporting multiple sites. Experience with root cause analysis methods and incident management frameworks. Wondering if you're a good fit? We believe in investing in our people, and value candidates who can bring their own diversified experiences to our teams, even if you aren't a 100% skill or experience match. Here are a few qualities we've found compatible with our team. If some of this describes you, we'd love to talk. You love to understand how a system really behaves, not just what the alarm says. You're curious about why the same failure keeps showing up at different sites. You're an expert in staying calm and making a sound call during high-severity incidents. You're the kind of person who notices the number that's slightly wrong before anyone else does. Why CoreWeave? At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: Be Curious at Your Core Act Like an Owner Empower Employees Deliver Best-in-Class Client Experiences Achieve More Together We support and encourage an entrepreneurial outlook and independent thinking. We foster an environment that encourages collaboration and enables the development of innovative solutions to complex problems. As we get set for takeoff, the organization's growth opportunities are constantly expanding. You will be surrounded by some of the best talent in the industry, who will want to learn from you, too. Come join us! Compensation & Benefits The base salary range for this role is $109,000 to $160,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer In addition to a competitive salary, we offer a variety of benefits to support your needs. The benefits below reflect our US-based offerings for full-time employees; for roles in other locations, benefits vary and are shared during the hiring process. These include: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment, • A work culture focused on innovative disruption California Applicants California Consumer Privacy Act Equal Opportunity & Accommodations CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: careers@coreweave.com. Export Control Compliance This position requires access to technology and/or source code subject to U.S. export control laws. Any such access will be provided only in compliance with applicable U.S. export control requirements. As part of the recruitment process, CoreWeave may request limited information reasonably necessary to assess applicable export-control requirements.

Job Description Title: Water Quality Manager Location: Cedar Knolls, NJ (on-site) Status: Full Time (40 hours), Exempt Salary Range: $110,00 - $130,000 Benefits: We offer a competitive salary package, commensurate with experience, Comprehensive Health Benefits (medical, dental, vision), PTO including vacation, sick, and other forms of PTO, Retirement benefits, 457b option, Tuition Reimbursement/paid training, FSA, Life insurance (waiting periods may apply) Job Description Scope: The Water Quality Manager is responsible for the overall management, coordination, and oversight of the Authority’s water quality, laboratory, sampling, treatment process monitoring, and regulatory compliance programs. This position ensures the Authority maintains safe, reliable, and compliant drinking water operations in accordance with all applicable federal, state, and local regulations. Key Responsibilities: 1. Plans, organizes, directs, and oversees the Authority’s water quality, laboratory, sampling, treatment process monitoring, and regulatory compliance programs., 2. Supervises and coordinates the daily activities of assigned water quality, laboratory, and related operational staff., 3. Ensures compliance with all applicable federal, state, and local drinking water regulations, including NJDEP, EPA, and Safe Drinking Water Act requirements., 4. Manages required water quality monitoring and sampling programs, including testing schedules, sample collection, preservation, and chain of custody procedures., 5. Oversees laboratory operations to ensure analyses are performed in accordance with approved methods, quality assurance standards, and regulatory requirements., 6. Reviews and interprets laboratory results, operational data, and water quality trends to support treatment performance and compliance., 7. Works closely with operations staff to evaluate treatment process performance and recommend adjustments or corrective actions as needed., 8. Directs the preparation, review, and submission of required regulatory reports, compliance documentation, and water quality records., 9. Maintains accurate and complete records related to water quality testing, treatment performance, laboratory activities, and regulatory compliance., 10. Coordinates with regulatory agencies, consultants, outside laboratories, contractors, and internal departments on water quality and compliance matters., 11. Assists with inspections, audits, sanitary surveys, permit requirements, and other regulatory review processes., 12. Investigates water quality concerns, unusual analytical results, treatment-related issues, and customer complaints, and recommends appropriate follow-up actions., 13. Develops, implements, and updates departmental procedures, standard operating practices, and water quality-related programs., 14. Oversees the maintenance, calibration, and proper operation of laboratory instruments, monitoring equipment, and sampling devices., 15. Assists in planning and managing departmental budgets, purchases, equipment needs, and laboratory supply inventories., 16. Trains, mentors, and evaluates assigned staff and supports employee development, performance improvement, and compliance with departmental procedures., 17. Promotes and enforces safe work practices, laboratory safety procedures, and compliance with Authority safety policies., 18. Participates in emergency response activities and provides technical support related to water quality, treatment operations, and regulatory compliance as needed., 19. Effectively responds to incidents and exhibit the capability of working outside of normal business hours., 20. Performs related and other duties, as assigned. This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Functions of this position include work assignments in the ambient atmosphere including extreme cold, hot, wet, or other inclement weather conditions. Qualifications: LISCENSES & CERTIFICATIONS · Maintenance of a New Jersey Basic Driver’s License. · Possession and maintenance of appropriate New Jersey Department of Environmental Protection (NJDEP) Water Supply Operator Licenses, including T-3/T-4 and W-3/W-4, or the ability to obtain within an Authority-approved time period, depending on system classification and operational needs. · Possession and maintenance of a New Jersey Industrial Wastewater Treatment License (N-2 or higher) may be required based on Authority operations and regulatory responsibilities. EDUCATION & EXPERIENCE · A U.S. accredited Associate or Bachelor Degree in science, science informatics, or approved related field, including a four (4) credit microbiology and eight (8) credit organic chemistry lecture and laboratory courses. · Seven (7) or more years in the operation of public water systems, including treatment and laboratory experience; including three (3) or more years in a supervisory capacity. SKILLS & COMPETENCIES · Demonstrated proficiency in the New Jersey and Federal Safe Drinking Water Act. · Demonstrated proficiency in drinking water laboratory methods, including field, bench, instrument, and continuous water quality monitors. · Ability to work in a fast-paced, high-intensity work environment. · Demonstrated proficiency in leadership and supervision. Must be proactive, strategic, detail-oriented, and encourage staff development. Candidate must also demonstrate common courtesy and respect to all employees, customers, vendors, and public—even under the most difficult situations. · The person serving in this position is expected to maintain up-to-date skill sets to remain current with best available technologies. · Excellent comprehension, written and oral skills in English so that involved and complicated instructions and technical texts can be read, understood, produced, and communicated to staff. · Demonstrated proficiency in: o Personal computing applications such as Microsoft Office, industrial control systems (SCADA) and computerized maintenance management applications (facilities, equipment, grounds, fleet, fuel, etc.). o Reading instrumentation and control, electrical, mechanical, and structural drawings. o Instrumentation and control ladder logic and instrument calibration procedures. o Troubleshooting of electrical, mechanical, hydraulic, pneumatic, thermal, and process and instrumentation controls. · Ability to work harmoniously with co-workers, supervisors, managers, and the public. · Ability to demonstrate understanding and satisfactory compliance of SMCMUA policies, procedures, practices, processes, and essential functions. Company Description: In 1977, the Governing Bodies of Morristown, Morris Township, Morris Plains, and Hanover Township (the Creating Municipalities) passed parallel ordinances creating The Southeast Morris County Municipal Utilities Authority (SMCMUA). SMCMUA provides high-quality drinking water to customers in Morristown, Morris Township, Morris Plains, and Hanover Township with some service in Mendham Township and Harding Township, and to certain customers and municipalities outside its District in Morris County, New Jersey. On a typical day, about 100,000 people rely on SMCMUA's commitment to high quality for their drinking water needs. Equal Opportunity/Affirmative Action: SMCMUA prohibits discrimination based on the following protected categories: race, creed, color, national origin, nationality, ancestry, age, sex/gender, pregnancy, marital status, civil status, domestic partnership status, familial status, religion, affectional or sexual orientation, gender identity or expression, atypical hereditary cellular or blood trait, genetic information, liability for service in the Armed Forces of the United States, and disability. \nCompany Description In 1977, the Governing Bodies of Morristown, Morris Township, Morris Plains, and Hanover Township (the Creating Municipalities) passed parallel ordinances creating The Southeast Morris County Municipal Utilities Authority (SMCMUA). SMCMUA provides high-quality drinking water to customers in Morristown, Morris Township, Morris Plains, and Hanover Township with some service in Mendham Township and Harding Township, and to certain customers and municipalities outside its District in Morris County, New Jersey. On a typical day, about 100,000 people rely on SMCMUA's commitment to high quality for their drinking water needs. Equal Opportunity/Affirmative Action: SMCMUA prohibits discrimination based on the following protected categories: race, creed, color, national origin, nationality, ancestry, age, sex/gender, pregnancy, marital status, civil status, domestic partnership status, familial status, religion, affectional or sexual orientation, gender identity or expression, atypical hereditary cellular or blood trait, genetic information, liability for service in the Armed Forces of the United States, and disability. In 1977, the Governing Bodies of Morristown, Morris Township, Morris Plains, and Hanover Township (the Creating Municipalities) passed parallel ordinances creating The Southeast Morris County Municipal Utilities Authority (SMCMUA). SMCMUA provides high-quality drinking water to customers in Morristown, Morris Township, Morris Plains, and Hanover Township with some service in Mendham Township and Harding Township, and to certain customers and municipalities outside its District in Morris County, New Jersey. On a typical day, about 100,000 people rely on SMCMUA's commitment to high quality for their drinking water needs.\r\n\r\nEqual Opportunity/Affirmative Action:\r\nSMCMUA prohibits discrimination based on the following protected categories: race, creed, color, national origin, nationality, ancestry, age, sex/gender, pregnancy, marital status, civil status, domestic partnership status, familial status, religion, affectional or sexual orientation, gender identity or expression, atypical hereditary cellular or blood trait, genetic information, liability for service in the Armed Forces of the United States, and disability.

Job Description Passion. Commitment. Impact. EDP Renewables North America (EDPR) is at the forefront of the clean-energy transition. Headquartered in Houston, Texas, with eight regional offices across the continent, EDPR is operating over 9 gigawatts of renewable energy facilities and is actively developing hundreds of new utility-scale wind, solar, and battery-storage projects. EDPR is an owner-operator of its renewable energy portfolio, with best-in-class industry experts in all domains associated with developing, constructing, owning and operating large-scale renewable energy projects. EDPR is an industry leader in all aspects of the business, from implementing cutting-edge technologies in the field to creating a more inclusive and greener company culture. Powered by our slogan, “We Choose Earth,” we consider sustainability and resiliency to be crucially important to the electric grid, just as it is to every individual on our award-winning team. Join us! Role Overview: The Project Development Lead is responsible for the development of utility-scale renewable energy-powered generation projects from the project identification stage through financial closing and start of construction. This role will be focused on EDPR’s New York portfolio of early to late-stage development projects including wind farms, solar parks, battery storage facilities and repowering of our existing wind energy fleet. What You Will Be Doing: • Responsible for local state, federal, and regional permitting of utility-scale wind farms and solar parks, • Oversee the preparation of proposals that are submitted to potential commercial off-takers, • Obtain land rights to design, permit, construct, operate, and maintain wind, solar and battery storage projects, • Negotiate and establish local agreements that address tax abatement, Road Use and Decommissioning, • Establish and manage relationships with stakeholders, including elected officials, regulators, utilities, RTOs, and community leaders, to support project development, • Participate in policy outreach efforts to government officials regarding renewable energy industry issues, • Monitor interconnection studies performed by transmission providers and third parties and participate in interconnection agreement negotiations, • Manage the environmental study and permitting process, • Develop project budgets and support the financial analysis and modeling of the project, • Work with internal resources, such as the Legal, Engineering, Construction, Finance, Investment Analysis and Energy Assessment teams, • Manage external contractors supporting our portfolio of projects, • Provide reports to management by producing regular and frequent project updates, • Research energy market and competition on an ongoing basis, • Communicate information continuously and effectively to cross-functional team, • Additional duties as required Direct reports: None; individual contributor Travel: 50% Minimum Requirements: • Bachelor’s degree in Business, Engineering, Renewable Energy, Public Policy, Environmental Science, Communications, or a related field, • 5+ years of progressively responsible project management experience in energy or a related industry, • Understanding of Microsoft products and/or complementing products preferred. ArcGIS experience preferred., • Competency in Analytical Problem Solving, Strong Communication, Customer/Partner Relationships, and Technology Expertise preferred, • Valid Driver’s License Behavioral Requirements: • Strong organizational and time-management skills, • Strong written and verbal communication skills, • High attention to detail and strong interpersonal and teamwork skills, • Ability to work productively with limited supervision, • Strong interest in renewable energy, • Ability and willingness to travel and work overtime as needed, • Familiarity with wind and solar power project development preferred, • Exemplary standards of integrity, honor, safety, management, ethics, quality, and productivity, • Exhibit behaviors consistent with strong leadership and accountabilityPhysical demands & working conditions:, • Sitting/Standing/Flexibility: Ability to stand and sit for 8 or more hours when in an office environment, • Speech/Reading: Ability to speak, read, and write English proficiently and deliver a variety of instructions furnished in written, verbal, diagram, or schedule form, • Lifting: Ability to lift items weighing up to 10 pounds, • Vision/Hearing: Ability to understand a variety of instructions furnished in written, verbal, diagram, or schedule form, • Safety: Ability to understand and communicate safety precautions when necessary

Job Description MAIN FUNCTION: • Supervise all PNY maintenance and facilities personnel; this includes electrical, mechanical, facilities and other maintenance trades., • Ensure proper maintenance of all facilities (i.e., buildings and grounds) equipment and building management systems., • Coordinate all facilities-related equipment and system repairs to minimize downtime., • Manage assigned facilities-related equipment and system projects., • Coordinate Facilities Maintenance group’s assistance of Operations’ Equipment Maintenance personnel, as requested., • In addition to managing and coordinating, perform maintenance services routinely acting as a maintenance technician., • Serve as PNY’s compliance officer managing the company’s programs related to environmental, health, and safety (EH&S)., • Manage PNY’s service providers related to utilities, solid and hazardous waste recycling and disposal, water treatment, and grounds maintenance., • Manage assigned facilities-related projects., • Serve as the Facilities Department’s liaison with PNY’s Security Department. QUALIFICATIONS: • High School diploma or equivalent, plus 2 years technical/occupational training., • 5 to 7 years of experience in building maintenance., • Low Pressure Boiler Operator’s License (Black Seal)., • Proficient with facilities equipment and building management systems., • Good communication skills, including ability to communicate effectively in English. Spanish is a plus., • Good coordination and prioritization skills., • Proficient in Microsoft Office programs., • Flexibility and ability to multi-task., • Provide 24 hour emergency repair service, if necessary. WORKING CONDITIONS: The work environment characteristics are representative of those an employee encounters while performing the essential functions of this job. KEY RELATIONSHIPS: • PNY Staff, • Outside Vendors and Contractors DUTIES AND RESPONSIBILITIES _ To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Serving as PNY’s maintenance manager:, • Manage and supervise all PNY maintenance personnel; this includes electrical, mechanical, and other maintenance trades., • Managing and coordinating the proper maintenance of all facilities (i.e., buildings and grounds) equipment and building management systems. This includes emergency, routine, and preventive maintenance procedures on items including but not limited to boilers, chillers, cooling towers, air compressors, HVAC equipment, water treatment systems, compactors, conveyors, sorter, solar energy system, and other equipment within the purview of the department., • Ensuring the safe and proper performance of maintenance activities, including that which is provided by outside vendors and contractors, by complying with all Environmental, Health, and Safety (EH&S) policies, plans, procedures, and related requirements., • Managing and coordinating proper maintenance of all Operations’ equipment not maintained by Operations Equipment Maintenance staff, such as equipment used by the Environmental Chambers room, etc., • Coordinating assistance of Operations’ Equipment Maintenance personnel with the maintenance of their equipment (e.g., SMT, Packaging, etc.), as requested., • Managing assigned facilities-related equipment and system projects. This includes managing the efforts of outside vendors and contractors. Also serving as a Contributor to identifying, defining, justifying, and completing projects designed to cut energy, operating and maintenance, and other facilities-related costs., • Performing maintenance services routinely acting as a maintenance technician., • Recommending improvements and changes in Facilities Maintenance equipment, processes, and staff., • Coordinating between shifts and acting as the central point of contact for maintenance work and issues., • Organizing and scheduling specialized training or seminars to enhance the overall ability of the department to perform in a sound technical and professional manner., • Monitoring and analyzing PM reports, work orders, and technician feedback to optimize effective and efficient PM procedures, planning, and scheduling., • Recommending improvements in the operation when the opportunity presents, • Serving as PNY’s compliance officer, manage the company’s programs related to EH&S matters. This covers the spectrum from:, • Acquiring and maintaining required permits., • Updating and maintaining as evergreen the company’s policies, procedures, plans, and training materials., • Conducting the requisite training and drills and maintaining the associated records., • Conducting the required inspections and testing and maintaining the associated records., • Preparing all required reports, renewals, submittals, etc., • Working closely with Facilities and Operations maintenance staff to ensure compliance with applicable EH&S regulations, including OSHA., • Responding and reporting appropriately to all accidents, incidents, and other related events. This will include meeting with OSHA and others, if necessary, along with the Director of Human Resources., • Following up on accidents, incidents, and other related events to ensure that the conditions that precipitated the same are eliminated, ameliorated, or otherwise mitigated., • Providing input to Human Resources related to Workmen’s Compensation and other reports that they must file., • Working closely with Risk Management to ensure that insurance and other risk-related concerns are appropriately addressed., • At least annually, reviewing reports that may reveal trends that must be addressed., • Managing housekeeping of all facilities by:, • Serving as the face of the Facilities Department in this regard to all PNY departments, outside vendors, and cleaning and painting contractors., • Managing the routine and periodic cleaning efforts conducted by Housekeeping personnel and outside vendors and contractors, both inside and outside of the buildings., • Manage the repair and replacement, as necessary, of any equipment and water and wastewater plumbing located in bathrooms, pantries, break rooms, and the Memory Café., • Working closely with Facilities Maintenance personnel to ensure the maintenance of all of PNY’s electro-mechanical cleaning equipment and certain equipment within the Memory Café., • Providing cleaning equipment and supplies to other departments within PNY so that they may police their respective areas., • Managing the provision, rework, cleaning, and maintenance of cubicles, furniture, and other office-related items under the purview of the Facilities Department., • Managing all housekeeping facilities personnel, • Managing PNY’s relationships with service providers related including but not limited to:, • Utilities including electric, city water, sanitary sewer, natural gas, and diesel fuel., • Well water treatment system inspection, sampling, and testing by a licensed operator., • Solid and hazardous waste recycling and disposal, as well as spill response., • Elevator inspections and maintenance., • Landscaping and snow removal., • Managing assigned facilities-related projects. These will generally fall within the areas or responsibility covered by this job description. Also serving as a Contributor to identifying, defining, justifying, and completing projects designed to cut energy, operating and maintenance, and other facilities-related costs., • Serving as the Facilities Department’s liaison, working closely with PNY’s Security Department related to the fire prevention and monitoring system, doors and locking systems, fire extinguishers, first aid/AED/CPR equipment and supplies, etc., • Managing the smock program for Operations., • Assisting in other areas, as assigned. COMPENSATION: The base salary range for this position is $95,000.00 to $115,000.00; the exact salary depends on several factors such as experience, skills, education, and budget. BENEFITS OVERVIEW: We offer a competitive benefits package that includes medical, dental, vision, basic life and AD&D coverage, short- and long-term disability, a 401(k) retirement plan, annual discretionary salary increases and bonuses. Employees receive paid company holidays, paid time off, and access to company-paid training. Optional benefits include tuition reimbursement, a 529 college savings plan, pet insurance, legal and ID theft coverage, and other voluntary insurance plans.

Description Remote As a Forward Deployed Engineer, AI/ML, you will join our client's AI and Data Engineering (AIDE) team and embed directly with utility clients to understand their hardest operational problems, then build and ship the systems that solve them. You will deliver production code in the client's environment, used by their people, and measured against their outcomes. The role focuses on taking AI from a promising demo to a system a utility's business runs on. Solutions will be grounded, evaluated, monitored, and trusted by the operators who depend on them. This is a full-time, permanent opportunity, offering a competitive salary and comprehensive benefits package. Qualified applicants must be willing and able to work on a w2 basis. Salary: $170,000 - $190,000/ yr. w2 JN -112026-109455 Responsibilities • Embed with utility clients to design, build, and deploy generative AI (GenAI) and machine learning (ML) systems that solve operational problems in the client’s environment., • Own the technical architecture for retrieval, orchestration, model selection, serving, evaluation, and monitoring, and defend it to client architects and security teams., • Run technical discovery independently, distinguish stated problems from underlying needs, and redirect when the requested solution is not appropriate., • Deliver a working, useful system early in each engagement and iterate toward production hardening with appropriate ownership and documentation., • Design task-specific evaluations before building, define correctness with client subject matter experts, and hold systems to those evaluations before release., • Build retrieval and grounding systems over client data, including structured, unstructured, and graph-backed sources., • Integrate with client data platforms and business systems, including undocumented and legacy systems., • Instrument systems so accuracy, latency, cost, and drift are measured and hand off operations that client teams can run., • Build and deploy operator-facing application layers, including review and approval interfaces, agent and chat front ends, evaluation dashboards, and workflow tools., • Set realistic expectations with executives about AI capabilities and limitations., • Manage scope, timeline, and expectations against a defined statement of work and raise risk early., • Contribute reusable accelerators, evaluation harnesses, and reference architectures, and share implementation feedback with engineering and product teams., • Apply AI safety, data privacy, and governance controls appropriate to utility regulatory contexts. Experience Requirements • Bachelor’s degree in computer science, engineering, statistics, or a related quantitative field., • Five or more years of engineering experience with GenAI or ML systems shipped to production and iterated on based on real usage., • Expert proficiency in Python and working proficiency in at least one of TypeScript, Scala, or Java., • Hands-on production experience with at least one major model provider or open-weights stack, and one vector or hybrid retrieval system., • Experience building and applying evaluation frameworks for LLM and ML systems, including RAG, agentic or multi-agent systems, structured extraction, or text-to-SQL., • Experience with LLMOps, including model serving, latency and cost management, prompt and model versioning, monitoring, and regression detection., • Working knowledge of at least one major cloud ecosystem (AWS, Azure, or GCP). AWS and Databricks preferred., • Proficiency with Git, Docker, and CI/CD tools., • Experience using AI coding assistants and agentic development tools to rapidly prototype, test, and iterate., • Experience in the energy or utility industry, or another asset-heavy sector, with familiarity with systems, data, and operational constraints utilities face., • Experience shipping on compressed timelines from first conversation to a working system in weeks., • Desired: utility experience, knowledge graphs or semantic layers, agent frameworks and tool-calling in production, fine-tuning or prompt optimization, classical ML experience, data engineering with Spark and lakehouse architectures, Databricks Apps or modern front-end frameworks, and relevant cloud or Databricks certifications. Education Requirements • Bachelor’s degree in computer science, engineering, statistics, or a related quantitative field. Advanced degrees are a plus.

Location: Astoria, US Accountable for the daily management and coordination of NYPA's overall operations, including overseeing, monitoring, and evaluating the operational performance; directing the preparation of operating budgets and proposals for capital expenditure and investments in infrastructure, technology, equipment, systems, or other assets and resources; analyzing and approving operational investments that best meet the organization's business needs. Manages responsibilities across multiple disciplines within the Operations job family. The Operations Manager is responsible for the safe, reliable, and efficient operation of one or more electric power generating plants and associated assets. This role ensures high plant availability through operational excellence and effective asset management practices. The Operations Manager also ensures that all NYPA assets comply with applicable NYPA policies and regulatory requirements for safety and environmental protection. The position is accountable for the daily management and coordination of NYPA's operational activities, including overseeing, monitoring, evaluating plant performance and providing appropriate solutions. Responsibilities include supporting the development of operating budgets and proposals for capital expenditures, as well as recommending investments in infrastructure, technology, equipment, and systems that support organizational needs. The Operations Manager analyzes and provides recommendations for operational investments, workforce management while being available during off hours to support operation's needs. The role is responsible for supervising operations management personnel and unionized employees and may oversee activities across multiple disciplines within the Operations job family. Responsibilities: • Develop and update Capital and Recurring, Non-Recurring, and Emergent O&M budgets., • Submit, Track and update Accruals, and report on budget Variances., • Develop Project and CEAR requests and justification., • Develop detailed scope, budget and schedule, including Operation, Contractor Maintenance and Contractors., • Manage relationships, coordination and execution of Project Management Non Recurring and Capital Projects., • Responsible for the entire coordination and program management of ALL FDNY Programs that NYPA participates at the 500MW Plant., • Responsible for operations and maintenance cost control through review and management of budget, contracts, purchases and project timing., • Ensure equipment is maintained to achieve and sustain high ISO Performance., • Ensure equipment is operated properly and identify, recommend and institute new operating procedures and processes., • Implement Operating, Hold Off, and Safety Permit Procedures for maximum safety of plant personnel and equipment., • Recognize and direct corrective action for abnormal conditions., • Work closely with key suppliers on critical equipment performance and product development., • Manage relationships and communication with external entities including, but not limited to environmental agencies, safety, security, peer utilities, etc., • Ensure maintenance is performed as planned and scheduled according to Priority Level and Equipment Criticality designations., • Manage and ensure the development of job plans and work orders, including Job Safety Analysis (JSA's)., • Ensure and help with the development and tracking of standing work orders (SWO)., • Monitor and work with contractors to improve safety performance., • Conduct root cause analysis for significant events and take corrective action., • Provide ongoing field support, monitor progress, quality and follow-up on completion of field jobs., • Interface with and build relationships with Energy Control Center (ECC) Outage Coordinator, ECC Senior System Operator and Energy Resource Management (ERM) Traders., • For major outages, ensure contractors execute obligations of the contract within budget and safety guidelines., • Participate in resolution of critical path decisions in the execution of major contracts., • Ensure MAXIMO is fully utilized for all planning, scheduling and reporting activities., • Ensure compliance with all regulatory and NYPA standards for environmental protection., • Manage personnel effectively and in compliance with NYPA policy. Additional Responsibilities for SENY location: • Manage long term SENY customer contracts., • Direct maintenance efforts., • Direct Outage management (without services from Project Management). Knowledge, Skills and Abilities: • Thorough understanding of gas and steam turbines, operation and maintenance requirements as appropriate for assigned location., • Highly skilled in personnel management., • Strong communication skills to effectively interact with all levels both within and outside of NYPA., • Able to negotiate with outside agencies, contractors and suppliers., • Good working knowledge of capital and O&M budgets., • Familiar with MAXIMO systems and procedures., • Knowledgeable of the NYPA organization and utility industry., • Demonstrated high level of leadership and supervisory skills., • Additional KSAs for SENY location: Familiarity with Siemens and/or G.E. gas turbines. Experience with fossil related water quality and chemistry issues. Experience with dual fuel gas turbine operation. Experience with combined cycle plants preferred. Knowledge of Hazardous materials, Ammonia, Glycol, R-22 and the associated Environmental regulations. Education, Experience and Certifications: • Bachelor of Science in engineering or its equivalent or an additional 4 years of power plant experience., • Minimum 5 years power plant operations experience including high voltage switchgear preferred., • Minimum 3 years' experience as a First Line Supervisor. Physical Requirements: • Up to 20% travel primarily within NY State., • Protective equipment must be worn in the performance of some duties., • Work with hazardous materials may be required., • Ability to access all areas of the plant and conduct physical evaluations of grounds and equipment including ability to climb and work at high elevations., • Ability to perform physically demanding work while wearing a respirator., • Extended working hours with the possibility of weekend and holiday work, as required by schedules, workload, and plant conditions., • Able to lift/move objects weighing in excess of 40lbs. The New York Power Authority is committed to providing fair, competitive, and market-informed compensation. The estimated salary range for this position is $147,000 - $221,000. The New York Power Authority and Canal Corporation believes that diversity, equity, and inclusion drive our success, and we encourage women, people of color, LGBTQIA+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents and veterans to apply. As an equal opportunity employer, NYPA/Canals is committed to building inclusive, innovative work environments with employees who reflect communities across New York and enthusiastically serve them. We proudly celebrate diversity and do not discriminate based on race/color, creed/religion, national origin, citizenship or immigration status, age, disability, military status, gender/sex, sexual orientation, gender identity/expression, pregnancy and related conditions, familial/marital status, domestic violence victim status, predisposing genetic characteristics, arrest/criminal conviction record or any other category protected by law. NYPA/Canals will also provide reasonable accommodations during the hiring process related to candidates' disabilities, pregnancy-related conditions, religious observances/practices and/or domestic violence concerns. To request an accommodation, please email accessibility@nypa.gov.

Texture is building the operating system for modern energy operationsone system to see, coordinate, and run the grid as distributed energy, electrification, and large new loads reshape everything. As a Senior Product Manager, you'll own critical product areas that help modern energy companiesutilities, VPP operators, retail energy providers, and grid services teamsmonitor, coordinate, and run their operations in a single workspace. You'll translate complex operational reality (meters, devices, sites, grid topology, events, dispatch, reporting, and compliance) into clear, shippable product directionand ship with a fast, high-ownership team. What you'll help deliver: • An intuitive control center for grid operationswhere teams can see an issue, act, and confirm the result without switching systems, • Intelligence and automation that turn grid signal into action: anomaly detection, prioritization, recommended next steps, and workflow automation, • End-to-end operational workflows across grid operations (coordination, dispatch/telemetry, performance, reporting, and auditability), • Utility-grade platform capabilities: data ingestion/modeling, auditability, access controls, reliability, and security-by-design, • Cross-surface experiences spanning dashboards/analytics, maps & topology, operational tables, alerts, and collaboration You'll be responsible for: • Owning product strategy and execution for one or more core areas (e.g., program operations, grid visibility, dispatch/telemetry, reporting, data modeling), • Turning messy real-world problems into crisp product bets: problem framing, success metrics, sequencing, and clear tradeoffs, • Working deeply with engineering and design to ship: PRDs/specs, prototypes, edge cases, rollout plans, and iteration loops, • Leading cross-functional execution: aligning stakeholders, unblocking the team, managing dependencies, and driving decisions from kickoff through delivery, • Building operator-grade UX: fast, trustworthy, data-dense interfaces with clear states, audit trails, and predictable behavior, • Defining the "system of action": how insights become decisions, and decisions become actions (and how we prove outcomes), • Building AI-native operator experiences: human-in-the-loop automation, assistive copilots, and intelligence that's explainable, auditable, and safe, • Partnering with go-to-market and customer teams to capture feedback, de-risk releases, and tell a clear product story, • Establishing product hygiene: roadmap clarity, dependency management, customer comms, and internal alignment A high-agency product leader who can operate in ambiguity, move quickly, and raise the bar on product quality and outcomes. You'll thrive here if you: • Want to own the whole thing, not a slice of it, • Can reason about complex systems (data, operations, workflow) and communicate simply, • Make good decisions with imperfect informationand course-correct fast, • Sweat the details that make software trustworthy for operators (states, permissions, auditability, failure modes), • Love collaborating with design and engineering as a single product team, • Enjoy being customer-facing: discovery calls, workflow mapping, and turning feedback into product leverage Requirements: • 5+ years in product management, with experience shipping complex software (B2B, enterprise, platform, or workflow-heavy products), • Demonstrated ownership of product releases: planning and sequencing, quality bars, launch readiness, rollout/flagging, and post-release iteration, • Proven ability to define and ship end-to-end workflows (not just isolated features), • Strong product thinking: crisp problem framing, prioritization, and measurable outcomes, • Strong communication: clear writing, clear specs, and strong cross-functional alignment, • Experience with energy, utilities, VPPs, DERMS, AMI/SCADA, GIS, or operational analytics, • Experience building intelligent products (ML, rules engines, anomaly detection, or copilot-style workflows), including evaluation/metrics and human-in-the-loop design, • Experience building SaaS product surfaces like activity feeds, notifications, inboxes, and real-time collaboration/multiplayer workflows, • Experience shipping map-based and geo/spatial product experiences (layers, topology, geospatial search, and location-aware workflows), • Experience building data products: ingestion/modeling, data quality, governance, or auditability, • Experience with security/compliance requirements in enterprise environments (SOC 2, SSO/SAML, RBAC, audit logs), • Technical fluency (APIs, event-driven systems, integrations) and comfort partnering deeply with engineering, • Early-stage startup experience (0?1, building while scaling), • Sponsored team lunches (twice monthly, tied to demo days), • Flexible paid time off (20 days minimum encouraged annually), • 12 weeks paid parental leave, • Up to 2 weeks paid bereavement leave, • Medical, dental, and vision fully covered for employees and families (employees contribute $1/month), • Company-provided life insurance, short-term disability, and long-term disability, • Pre-tax benefits (FSA, HSA, commuter benefits, dependent care), • Well-being & mental health support NYC preferred. Flexible for the right candidate.

Senior Consultant - Transmission Planning & Interconnection Position Overview A growing power systems consulting organization is seeking a Senior Consultant - Transmission Planning & Interconnection to support generation and resource interconnection projects across North America. This position will focus on evaluating the grid impacts and interconnection requirements associated with new generation, battery energy storage, large-load, and transmission projects. The successful candidate will perform technical studies, develop interconnection models and applications, and advise clients throughout the interconnection process. Key Responsibilities • Perform interconnection feasibility and transmission studies for new generation, energy storage, large-load, and transmission projects., • Evaluate potential project locations, capacities, and points of interconnection to identify viable development opportunities., • Prepare and support interconnection applications, including development of power flow, dynamic, and short-circuit models., • Support clients throughout the full interconnection study lifecycle, from initial feasibility through later-stage studies and agreements., • Coordinate with utilities, transmission owners, and grid operators throughout the interconnection process., • Review utility and grid operator study results to identify potential constraints, upgrades, costs, and technical risks., • Perform broader power system planning and reliability studies as required., • Clearly communicate study results and technical recommendations to both technical and non-technical stakeholders. Qualifications • Bachelor's degree in Electrical Engineering with a concentration or experience in power systems., • Approximately 5+ years of transmission planning, grid planning, interconnection, or related power systems experience, including significant experience within North American power markets., • Previous experience working in an engineering consulting or advisory environment is strongly preferred., • Master's degree in Electrical Engineering or Power Systems is a plus., • Advanced working knowledge of PSS®E and/or PSLF, including associated models, automation, and analysis tools., • Experience conducting transmission planning and power system studies, including power flow, contingency, stability, and related analyses., • Familiarity with one or more major North American power markets or interconnections, including the Eastern Interconnection, ERCOT, and WECC., • Direct experience supporting generation, storage, or large-load interconnection studies., • Experience performing generation deliverability or transmission assessment work within ISO/RTO markets is highly valued., • Experience with TARA for transmission reliability or contingency analysis is a strong plus., • Familiarity with PSCAD and EMT modeling, particularly for inverter-based resources, protection/control interactions, or related grid integration studies, is strongly preferred., • Strong analytical, technical writing, and client communication skills. Opportunity This position offers the opportunity to work on technically complex grid integration and interconnection projects involving renewable generation, energy storage, large loads, and transmission infrastructure. The role provides exposure to multiple North American markets and the opportunity to work directly with developers, utilities, and other power industry stakeholders. Competitive compensation and a comprehensive benefits package are offered, including health and retirement benefits, paid time off, and other employee benefits based on location and eligibility.

Track Hoe Operator (Lebanon, Manheim, Quarryville Locations) Job Description B. TRACKHOE OPERATOR who enjoys the outdoors and takes pride in a job well done. Qualified candidates need to be able to operate a trackhoe in a safe manner for bulk excavations, trench work and installing utilities.

A leading staffing agency is seeking a Water Systems Operator in Middlesex County, NJ.

Job Description About the Role: The Boiler Operator Red is responsible for the safe and efficient operation of industrial boilers within a facility, ensuring continuous steam and hot water supply to meet operational demands. This role requires vigilant monitoring of boiler systems, performing routine inspections, and making necessary adjustments to maintain optimal performance and compliance with safety regulations. The Boiler Operator will troubleshoot and resolve mechanical and operational issues promptly to minimize downtime and maintain production schedules. Additionally, the role involves maintaining accurate logs and reports related to boiler operations, fuel consumption, and maintenance activities. Ultimately, the Boiler Operator Red plays a critical role in supporting facility operations by ensuring reliable and safe boiler functionality. Minimum Qualifications: • High school diploma or equivalent., • Valid Boiler Operator Red certification/license as required by state regulations., • Minimum of 2 years experience operating industrial boilers or related equipment., • Strong understanding of boiler operation principles, safety standards, and regulatory requirements., • Ability to read and interpret technical manuals, blueprints, and operational procedures. Preferred Qualifications: • Additional certifications in boiler maintenance or mechanical systems., • Experience with computerized control systems and automated boiler monitoring software., • Basic knowledge of HVAC systems and facility utilities., • Previous experience working in a manufacturing or industrial plant environment., • Completion of OSHA safety training or equivalent workplace safety programs. Responsibilities: • Operate and monitor boiler systems, including starting, stopping, and adjusting controls to maintain proper pressure and temperature levels., • Conduct regular inspections of boilers, burners, and auxiliary equipment to identify and address potential issues., • Perform routine maintenance tasks such as cleaning, lubricating, and replacing worn parts to ensure equipment longevity and safety., • Maintain detailed records of boiler operations, maintenance activities, and safety checks in compliance with regulatory standards., • Respond promptly to alarms and emergency situations, implementing corrective actions to prevent hazards or equipment damage., • Collaborate with maintenance and engineering teams to coordinate repairs and upgrades as needed., • Ensure compliance with all safety protocols, environmental regulations, and company policies related to boiler operation. Skills: The Boiler Operator Red utilizes technical skills daily to operate and adjust boiler controls, ensuring systems run efficiently and safely. Analytical skills are essential for diagnosing operational issues and implementing effective solutions to prevent downtime. Strong communication skills facilitate clear reporting and coordination with maintenance teams and management. Attention to detail is critical when performing inspections, logging data, and adhering to safety protocols to maintain compliance and prevent accidents. Additionally, problem-solving abilities enable the operator to respond swiftly to emergencies and optimize boiler performance under varying operational conditions.