Trabajos defence en BoltonCrear alertas

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit 4x Development and Production Test Engineer - Electronics/Electrical subcontractors on an initial 12 month contract. • Looking for somebody with substantial test engineering experience., • Diagnosis of test failures, • Testing experience down to component level, • The department are keen to hear from candidates from a background with Electronics, RF, Microwave skills or candidates that have strong Test, Diagnostics, Repair Engineering skills.Hourly Rate: £37.00ph (Umbrella). Contract Duration: 12 Months (initially and then ongoing and long-term thereafter)Development and Production Test Engineer – Electronic / Electrical Job Description:Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level., • Provide Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations., • Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions., • Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level., • Identification of remedial and corrective actions, in a timely manner allowing Manufacturing to continue production in line with programme., • Evaluation of technical problems in order to develop proposals for test equipment investigations and corrective actions, including process improvements., • Test Engineering representative at Defect Review Board meetings to ensure efficient progress of equipment and quality notifications towards corrective action.Role requirements (skills, training and qualifications):, • HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test., • A good understanding of measurement and test principles, and associated test equipment., • An understanding of the typical CADMID product lifecycle for test equipment is desirable., • An understanding of RF and microwave technology at subsystem level would be an advantage., • An understanding of Environmental testing (including ESS) would also be an advantage.

Mechanical Fitter 12 Month contract Based in Bolton Offering £28.35ph Inside IR35 Apprenticeship Required Are you an experienced Mechanical Fitter? Do you hold an apprenticeship in a related industry? Do you want to work with an industry-leading company? If the answer is yes to these, then this could be the role for you! You will be a Mechanical Fitter working with a Leading Defence and Aerospace company where you will be responsible for carrying out manufacturing and test tasks within the mechanical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets, and timescales to meet project objectives. What you will be involved with: • Certify the product in line with the product certification procedure, • Maintain product certification and approval via regular audits, • Possess a versatile skill base with the capability to apply these skills across a range of tasks, • Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle, • Ensure manufacturing build times are met, • Check and complete all paperwork associated with the manufacturing data pack, • Maintain to the highest level, workmanship standards and product quality, • Ensure compliance with all associated procedures applicable to the manufacturing process, • Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21. Mechanical Fitter 12 Month contract Based in Bolton Offering £28.35ph Inside IR35 Apprenticeship Required Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

World Class Defence Organisation based in Bolton is currently looking to recruit a Mechanical Inspector subcontractor on an initial 12 month contract. Experience with inspecting the work of other people is essential – not just the inspecting of their own. Must have had significant recent experience of this – major part of their role.Hourly Rate: £28.35 rising to £29.70 after 12 weeks. Overtime Rates of 'time and a half' for all hours worked over 37 hours per week.Contract Duration: 12 Months initially and then ongoing and long-term thereafter.Mechanical Inspector Job Description: • Certify the product in line with the product certification procedure, • Examining for correct assembly, • Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc., • Inspect for physical damage, • Intermediate inspection checks non product certification, • Monitor product certification operators, • Check and complete all paperwork associated with the manufacturing data pack, • Control defect items via segregation from good product, • Raise and maintain relevant data records/defect reports, • Produce relevant inspection/quality control documentation/history sheets, • Care for and use specialised inspection tools, • Maintain product certification and approval via regular audits, • Ensure compliance with all associated procedures applicable to the manufacturing process, • Ensure inspection times are met, • Possess a versatile skill base with the capability to apply these skills across a range of tasks, • Maintain to the highest level, workmanship standards and product quality, • Maintain a safe working environment, • Maintain a good housekeeping policy, • Willing to contribute to an environment of process improvement.One of the following qualifiactions;, • Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship, • Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3, • Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3, • Vocational NVQ3 with Further Education, BTEC ONC/HNC

World Class Defence Organisation based in Stevenage is currently looking to recruit a Vetting Officer on an initial 12-month contract. The role will be 2 days onsite and 3 days from home.Job Title: Vetting OfficerRate: £20.00 per hourLocation: StevenageHybrid / Remote working: 2 days per week onsiteContract: 37 Hours per weekOvertime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’Duration: 12 Months (initially and then ongoing and long-term thereafter)Job Description:An exciting opportunity has arisen to work within the dynamic and vibrant environment of security vetting. This is a crucial area of the business which supports the delivery of security cleared personnel. You will be part of a highly motivated and progressive team who are the first layer of security in ensuring any personnel risks are identified and managed.Responsibilities: • Support Recruitment in obtaining security clearances and checks for all new employees., • Supporting with the management of confidential and complex vetting enquiries., • Be point of contact for vetting issues/problems., • Liaise with UKSV and other external agencies when appropriate., • Work with external IT platform to obtain and update security clearances., • Provide support to areas of Security Services., • Lead on departmental projects for successful implementation to meet deadlines., • In addition, you will be required to support the Personnel Security Manager in the successful implementation of the Vetting Strategy. Your role will be diverse and fast-paced as you support the department and business in achieving its objectives and reducing risk to the organisation.Skillset/experience required:Essential:, • Experience of HMG BPSS and UKSV vetting processes, • Excellent interpersonal skills, • Able to work under pressure and prioritise work as required, • Professional meticulous approach, with a keen eye for detail, • Experienced on the use of electronic Vetting Databases and multi IT platformsDesirable:, • Experience and knowledge of MOD and defence industry, • Relevant vetting and Personnel Security experience or qualification, • Awareness and knowledge of recruitment and on boarding processes for defence industry, • Personnel Security awareness for the ongoing aftercare of security cleared staff, • Presentational experience for the delivery of training Interested? Apply now or WhtasApp/ring Lukas ->

World Class Defence Organisation based in Bolton is currently looking to recruit a General Operative (Microelectronics / Soldering) on an initial 12 month contract. This position will specifically require experience with strong soldering experience. Any prior microelectronics experience would be great, i.e. soldering under a microscope. You will also need experience working within a manufacturing environment. There are 3 positions working on standard days and 1 position working nights. Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph. Overtime hours (over 37 hours) are at normal hourly rate plus 50% Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Job Spec:The General Operator will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. • Carry out detailed standard assembly / manufacturing activities, undertaking all work to requisite procedures, quality standards, safety requirements and timescales., • Very good Soldering experience is required, • Any experience of soldering under a microscope or in a similar environment would be great, • Any Looming or PCB experience would be great, • Previous background of working in a Production Technician or Assembly Operative role would be great, • Contribute to the efficient movement of work and information in the manufacturing area., • Adhere in all activities to agreed standards and behaviours., • Comply with all health and safety requirements., • IPC 610 certified / trained preferred., • Dexterity for fine work. Read and interpret layouts. Follow instructions. Willing to work flexible shift patterns. Attention to detail. Work on own with minimal supervision. Flexible. ESD training. Desirable skills: PC literate. Colophony health surveillance.

MERITUS are recruiting for a Manufacturing Engineer to support in assembly and integration for major defence programmes from our client's Bolton HQ. MANUFACTURING ENGINEER - MUST HAVE SAP EXPERIENCE - INSIDE IR35 - £35 PER HOUR - 12 MONTHS (HIGHLY LIKELY EXTENSION) - BOLTON - MUST UNDERGO SC CLEARANCE - SINGLE STAGE INTERVIEW PROCESS • As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing., • Compilation and update of Manufacturing Instructions., • Design, Commissioning and proving of associated tooling., • Support the industrial validation process through the use of FMEA's, FAI's etc., • Resolution of technical problems that may arise during the manufacturing process., • Route card changes as a result or rework activities., • Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions., • Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 and level 3 (ONC), • OR Formal further education certificate to HNC or equivalent certificate with experience within an engineering discipline, • 5 years' experience within an engineering discipline., • Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators., • Have experience of Electronic Sub Assembly manufacture through to System level builds., • Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems., • Must be able to work within, and contribute to a team environment., • Recognise and understand customer requirements, and respond to them., • Understand and work to Company Processes and Procedures., • Have the ability to communicate both within the working group and at various levels of the organisation.

World Class Defence Organisation is currently looking to recruit a Project Officer subcontractor on an initial 12 month contract. Any experience of Power BI would be very beneficial. Rate: £30.00 per hourLocation: Bolton Hybrid / Remote working: Hybrid role of 3 days per week onsiteContract: 37 Hours per weekOvertime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’Duration: 12 Months (initially and then ongoing and long-term thereafter)IR35 status: Inside IR35 (Umbrella) Interview Process: One stage onsite InterviewProject Officer Job Description: • Understanding of how manufacturing data supports cost, schedule, quality, and delivery performance within a project environment., • Experience extracting, transforming and analysing data from project and manufacturing systems (such as Primavera/MS Project, ARM, JIRA, SAP), • Ability to translate complex manufacturing and materials data into clear, structured reports and dashboards for project teams and management., • Strong skills in Microsoft Excel, including creating, maintaining, and analysing manufacturing data reports, using formulas, tables, and basic data analysis techniques., • Experience creating professional PowerPoint briefing materials to support internal reviews, project updates, and management meetings., • Awareness-level knowledge of Power BI, including interpreting existing dashboards and reports to support project performance monitoring., • Strong attention to detail with a methodical approach to data accuracy and reporting., • Clear and confident communicator, able to explain data-driven insights to a range of stakeholders., • Proactive and well-organised, with the ability to manage multiple reporting tasks and meet regular deadlines.Key Responsibilities & Skills, • Analyse and report manufacturing and materials data using SAP, • Create and maintain Excel-based manufacturing performance reports, • Produce clear PowerPoint briefing materials for project and management reviews, • Support project teams with data analysis, reporting, and decision-making, • Interpret and utilise Power BI dashboards at an awareness level

World Class Defence Organisation based in Bolton is currently looking to recruit a Mechanical Fitteron initial 12 month contracts and then ongoing and long-term thereafter. Mechanical Engineering/Manufacturing qualifications essential. Significant mechanical fitting experience required – the work is at a fine detailed level, so any experience with intricate work would be beneficial.Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate:Hourly Rate: £28.35ph for the first 12 weeks and then £29.70 after week 12 (Umbrella). Overtime Rates of 'time and a half' for all hours worked over 37 hours per week.Mechanical Fitters Job Description:The Mechanical Fitter will be responsible for carrying out manufacturing and test tasks within the mechanical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. • Certify the product in line with the product certification procedure., • Maintain product certification and approval via regular audits., • Possess a versatile skill base with the capability to apply these skills across a range of tasks., • Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle., • Ensure manufacturing build times are met., • Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality., • Ensure compliance with all associated procedures applicable to the manufacturing process., • The successful candidate should be a team player who is able to demonstrate customer focus., • They should also have proven planning and organising skills and be flexible and adaptable., • Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21., • Formal further education certificate to HNC or equivalent certificate., • Manual handling training. Lifting & Slinging training (Including overhead cranes).Education Requirements:One of the following is required:, • Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship, • Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3, • Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3, • Vocational NVQ3 with Further Education, BTEC ONC/HNC

World Class Defence Organisation based in Bolton is currently looking to recruit 2x General Operative’s with very strong Soldering experience an initial 12 month contract. This position will specifically require experience with strong soldering or Circuit Card Assembly (CCA) or PCB Assembly experience. Any prior microelectronics experience would be great, i.e. soldering under a microscope. You will also need experience working within a manufacturing environment. Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph. Overtime hours (over 37 hours) are at normal hourly rate plus 50% Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Job Spec:The General Operator will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. • Carry out detailed standard assembly / manufacturing activities, undertaking all work to requisite procedures, quality standards, safety requirements and timescales., • Very good Soldering experience is required, • Any experience of soldering under a microscope or in a similar environment would be great, • Any Looming or PCB experience would be great, • Previous background of working in a Production Technician or Assembly Operative role would be great, • Contribute to the efficient movement of work and information in the manufacturing area., • Adhere in all activities to agreed standards and behaviours., • Comply with all health and safety requirements., • IPC 610 certified / trained preferred., • Dexterity for fine work. Read and interpret layouts. Follow instructions. Willing to work flexible shift patterns. Attention to detail. Work on own with minimal supervision. Flexible. ESD training. Desirable skills: PC literate. Colophony health surveillance.

Our client, a trusted partner of the UKs Ministry of Defence, is seeking an experienced Manufacturing Engineer with expertise in Assembly and Integration, particularly in circuit card assemblies. Based within the unit and missile assembly manufacturing facility, you will play a key role in ensuring products are built efficiently, on time, and within budget. As a vital member of the Manufacturing E... ZIPC1_UKTJ

We are looking for a contract Data Analyst The role focuses on leveraging data to optimise low-volume production of complex defence electronics, ensuring quality and efficiency. Responsibilities include analysing datasets across the electronics production lifecycle, identifying trends and anomalies in manufacturing, test, and supply chain data, and implementing data-driven solutions to enhance efficiency, reduce waste, and improve reliability. You will collaborate with electronics engineers, production and quality teams, create dashboards and reports for diverse stakeholders, enhance data collection and management practices, contribute to performance measurement frameworks, and potentially mentor junior analysts. Key skills include data analysis, an Electronic Engineering background, and experience in a manufacturing environment. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/ or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit 2x Manufacturing Controller subcontractors on an initial 12 month contract. This role requires someone with Stores experience within a manufacturing environment. Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph. Overtime hours (over 37 hours) are at normal hourly rate plus 50% Overtime Rate: Hours worked over 37 hours per week, are worked at the Overtime rate of time and a half. Contract Duration: 12 Months (initially and then ongoing and long-term thereafter)Manufacturing Controller Job Description:The Manufacturing Controller role will involve issue, receipt and management of stores and inventory in a stores environment. Loading, control and monitoring of work packages in a manufacturing environment.Responsibilities: • Stock control / storekeeping including shelf life control., • Loading the manufacturing cells with the requisite jobs in accordance with planned lead and cycle times, in order to comply with manufacturing programmes and delivery schedules., • Packing including the use of hand tools. Receiving and issuing of tooling., • Updating computer records., • Kitting activity., • Loading and unloading of Lorries.Skillset/experience required:, • Experience in a stores environment or manufacturing control., • Follow instructions., • Willing to work flexible shift patterns., • Attention to detail., • Work on own with minimal supervision., • Use own initiative., • Manual handling training., • Lifting & Slinging training (Including overhead cranes)., • ESD training.Desirable skills:, • PC skills, including EXCEL., • Fork lift truck licence., • Knowledge of Kanban and 2 bin systems., • Experience with an Enterprise Planning System e.g. SAP.

MERITUS are recruiting for 4x Mechanical Fitters to join our client in Bolton to work on exciting new defence programmes. You must have a HNC/HND and an NVQ 3 to qualify for the position; these must be available upon application. MECHANICAL FITTER - INSIDE IR35 - £28.35 PER HOUR - UNDERGO SC CLEARANCE - BOLTON - 12 MONTHS - MUST HAVE NVQ 3 & HNC/HND The Mechanical Fitter will be responsible for carrying out manufacturing and test tasks within the mechanical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Specific responsibilities include: • Certify the product in line with the product certification procedure., • Maintain product certification and approval via regular audits., • Possess a versatile skill base with the capability to apply these skills across a range of tasks., • Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle., • Ensure manufacturing build times are met., • Check and complete all paperwork associated with the manufacturing data pack., • Maintain to the highest level, workmanship standards and product quality., • Ensure compliance with all associated procedures applicable to the manufacturing process., • Maintain a safe working environment., • Maintain a good housekeeping policy., • Communicate best practice to other team members., • The successful candidate should be a team player who is able to demonstrate customer focus., • Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21., • Formal further education certificate to HNC or equivalent certificate.

General Operator (CCA) 12 month contract Based in Bolton Offering £24.78ph Inside IR35 Do you have experience with Circuit Card Assembly (CCA)? Do you have experience working within a manufacturing environment? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the General Operator (CCA), you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Carry out detailed standard assembly/manufacturing activities, undertaking all work to requisite procedures, quality standards, safety requirements, and timescales, • Contribute to the efficient movement of work and information in the manufacturing area, • Adhere in all activities to agreed standards and behaviours, • Circuit Card Assembly experience, • Dexterity for fine work. General Operator (CCA) 12 month contract Based in Bolton Offering £24.78ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Electrical Inspector - 2826-1 12-month initial contract - likely to be extended £28.25ph, UMB, inside iR35 (rising to £29.70ph after week weeks) Onsite in Bolton BPSS clearance only Due to the nature of the programme the successful contractor must be a sole British national. Essenitial Qualifications: • Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship, • Vocational G or H Units with Furth... ZIPC1_UKTJ

Electrical Fitter (Apprenticeship-Trained) Defence ManufacturingLocation: Bolton | Full-Time | Onsite Our client, a long-standing and respected partner of the UK Ministry of Defence, is seeking an experienced Electrical Fitter to join their established manufacturing team at their Bolton site. This role focuses on electrical assembly, fitting, and test activities within a highly regulated defence ma... ZIPC1_UKTJ

Our client, a trusted partner of the UK's Ministry of Defence, is seeking a Mechanical Inspector to join the certification team. The role involves authorising products in accordance with the product certification procedure at the Bolton site. Key Responsibilities: • Certify the product by the product certification procedure and monitor the operators responsible for product certification., • Upon inspectio... ZIPC1_UKTJ

Our client, a leader in the Defence & Security sector, is currently seeking an Electrical Calibration Operator for a contract position in Bolton. Key Responsibilities: • Working in a multi-discipline team to support the Operations team., • Initial calibration, routine calibration, and maintenance of test and measurement equipment., • Ensure that both factory and proprietary test and measuring equipment is mai... ZIPC1_UKTJ

Our client is a highly trusted partner of the UK Ministry of Defence and actively seeks a skilled Technical Administrator with extensive experience in Environmental Stress Screening (ESS). The successful candidate will manage all aspects of commissioning and day-to-day support of environmental and mechanical testing facilities at our client's advanced manufacturing facility in Bolton. If you are a... ZIPC1_UKTJ

World Class Defence Organisation is currently looking to recruit a Supplier Planner subcontractor on an initial 6 month contract. This role could suit a candidate from a MRP Controller, Supply Scheduler or Supply Chain Specialist background.This role is looking for a candidate with the following experience: • MRP planning experience and ideally some exposure to SAP, • Manufacturing environment., • Supply chain experienceRate: £27.00 per hourLocation: Bolton Hybrid / Remote working: Hybrid role of 3 days per week onsite, 2 days working from homeContract: 37 Hours per weekOvertime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’Duration: 6 Months (initially and then ongoing and long-term thereafter)IR35 status: Inside IR35 (Umbrella) Supplier Planner Job Description:This opportunity plays a significant part in the development of the Supplier Planning activities, aligning us to the Oliver Wight Class A standards. You will increase the already close working relationships with Manufacturing Operations and gain knowledge around programmes as well being a key support to the procurement team. You'll have specific supplier category opportunities to drive improved delivery and inventory performance. OTD appreciation is key to this role and plays an important part of the planning activities., • Supplier visits with the chance to engage in operational reviews with suppliers, whilst sharing KPI`s., • The opportunity to bring MRP planning and Material Master knowledge and support improvements required to be successful in supplier planning activities, • You join at a time of growth with exciting opportunities to work with lots of different stakeholders and play an important role within the business., • To join a great team who work collaboratively together and always support each other to reach our goals., • Regular on the job training and development is key and you will be given further opportunities to continue training to grow your knowledge.You will be a key member of the ISP-S sub-assemblies team and work with buyers, supply chain managers, Industrial engineers, sector leads, manufacturing planners as well as our supply chain excellence teamSkillset/experience required:, • Experience of working with an MRP (or similar) planning background within a manufacturing environment., • The capability to understand errors in the data and know how to rectify them., • Ideally experienced in SAP, although not imperative as training will be given., • Goal orientated with strong cultural awareness, excellent team working capabilities and able to drive key decisions through the supply base., • An ability to visit suppliers and our Stevenage office to work with our stakeholders., • Experience of working with suppliers on scheduled orders & fixed PO`s., • Ideally with experience of both working with suppliers as well as within a manufacturing environment with an ability to negotiate and meet deadlines., • An awareness and understand of key supply chain KPI`s., • A continuous improvement mind-set and ability to bring new ideas and experiences to the role.

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit a Production / Manufacturing Controller subcontractor on an initial 12 month contract. This role is ideally looking for a candidate with a strong Lineside Production background. The department welcomes applications from candidates who may currently hold titles such as Production Controller, Production Coordinator, Material Controller, Production Planner, Manufacturing Coordinator or Shop Floor Controller etc. Candidates with experience supporting shop floor operations, managing production orders, controlling materials or Work in Progress (WIP), and working closely with manufacturing teams to ensure materials are available to support production schedules are particularly encouraged to apply.Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph. Overtime hours (over 37 hours) are at normal hourly rate plus 50% Overtime Rate: Hours worked over 37 hours per week, are worked at the Overtime rate of time and a half. Contract Duration: 12 Months (initially and then ongoing and long-term thereafter)Job Description:Line Side Manufacturing Controller is required to support production operations within a fast-paced manufacturing environment. The successful candidate will ensure that materials, components, and production kits are available at the point of use to maintain uninterrupted manufacturing flow.Working closely with production, stores, and planning teams, the Line Side Manufacturing Controller will be responsible for managing material availability, work order control, and line-side inventory to ensure the efficient build and delivery of products.Key Responsibilities • Ensure all materials and components are available line-side to support production schedules., • Control and manage manufacturing orders and production documentation within the ERP system (e.g., SAP)., • Monitor material shortages and escalate issues to relevant teams to prevent disruption to production., • Liaise with stores, planning, procurement, and production teams to resolve supply issues., • Manage and maintain line-side stock locations and material flow., • Support the creation and control of production kits to ensure build readiness., • Track Work In Progress (WIP) and support production build requirements., • Ensure materials are issued correctly and recorded accurately within company systems., • Assist with inventory checks and cycle counts where required., • Support continuous improvement activities to enhance material flow and production efficiency., • Maintain high standards of housekeeping, safety, and compliance within the manufacturing area.Key Skills & Experience, • Experience working within a manufacturing, production, or engineering environment., • Strong understanding of material control, production support, or manufacturing logistics., • Experience using ERP or MRP systems (SAP experience desirable)., • Ability to work closely with production teams in a fast-paced shop floor environment., • Experience identifying and resolving material shortages or production issues., • Good communication skills with the ability to liaise across multiple departments.Desirable Experience, • Previous experience as a Manufacturing Controller, Production Controller, or Material Controller., • Experience within aerospace, defence, automotive, or complex manufacturing environments., • Knowledge of lean manufacturing or continuous improvement principles., • Experience working with production schedules or manufacturing planning teams.

Manufacturing Engineer 12 Month Contract Based in Bolton Offering circa £35ph Inside IR35 Eligible for SC clearance Are you an experienced Manufacturing Engineer? Do hold a Level 3 Apprenticeship or BEng? Are you well experienced with SAP? Are you looking to work with an industry-leading company? If your answers are yes to these, then this could be the role for! As the Manufacturing Engineer, you will be working alongside a market-leading defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved with the assembly manufacturing facility with a key focus to ensure that the products are built efficiently. to this end, you will be carrying out activities including: • Compilation and update of Manufacturing Instructions., • Design, Commissioning, and proving of associated tooling., • Support the industrial validation process through the use of FMEA’s, FAI’s etc., • Resolution of technical problems that may arise during the manufacturing process., • Route card changes as a result or rework activities., • Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions., • BEng in relevant Engineering Degree, • Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators., • Have experience in Electronic subassembly manufacture through to System level builds., • Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems., • Must be able to work within, and contribute to a team environment., • Recognise and understand customer requirements, and respond to them., • Understand and work with Company Processes and Procedures., • Have the ability to communicate both within the working group and at various levels of the organisation., • Manual handling training., • ESD training. If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

A fantastic opportunity has arisen for a Data Engineer (Generative AI) to join a developing international and transversal structure, supporting internal stakeholders through the design, delivery and maintenance of robust data solutions. This role performs the duties of a Data Engineer (Generative AI) and reports into a senior technical lead within the organisation. Key Responsibilities • Evaluate, design, build and maintain structured and unstructured data sets for a range of internal customers, • Design and support resilient, secure and scalable data pipelines aligned to business needs, • Collaborate closely with internal stakeholders to understand data requirements and optimise data usage, • Ensure data quality, governance and compliance standards are met across all data assets, • Support data exchange and processing solutions including ETL, APIs and integration layers, • Contribute to the ongoing improvement of data platforms and architectures, • Stay up to date with emerging technologies and provide input into the organisation’s data and AI technology roadmap The ideal candidate would have • Experience with SQL technologies such as MS SQL or Oracle, • Experience with noSQL technologies such as MongoDB, InfluxDB or Neo4J, • Strong data exchange and processing experience including ETL, ESB and API-based integrations, • Development experience, ideally using Python, • Knowledge of big data technologies such as the Hadoop stack, • Exposure to NLP and OCR technologies, • Awareness or hands-on experience with Generative AI solutions, • Experience with containerisation technologies such as Docker, • Background in an industrial and/or defence environment The ideal candidate must have • Proven experience working as a Data Engineer or in a closely related role, • Strong understanding of data management, data quality and governance principles, • Ability to work collaboratively across technical and non-technical teams, • Experience designing secure and maintainable data solutions, • Eligibility to meet UK security clearance requirements, • Have Sole British Nationality This position offers a lucrative benefits package, which includes but is not inclusive of: • Bonus scheme (based on company performance), • Annual pay reviews and promotion reviews (based on personal performance), • Overtime paid at an enhanced rate, • Flexi-Leave (of up to 15 days), • Pension scheme (total contribution of up to 14%), • Subsidised site facilities and restaurants, • Free parking, • Excellent career progression and training / career development opportunities If this role looks like your next challenge, please contact Keelan ASAP or apply via this advert! Please note that due to the nature of the client’s business, only candidates who currently hold SOLE British Citizenship (without limitations) will be considered. We endeavour to reply to every candidate, every time but if you haven’t heard back within 10 days, please understand that you have unfortunately been unsuccessful for this position, or the position has been filled. Please call the office or send an email to discuss other potential positions.

Production Test Engineer 12-month contract Based in Bolton Offering £37ph Inside IR35 Are you an experienced Test Engineer? Do you have experience testing down to component level? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Production Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Providing test engineering support to operators on the shopfloor, • Testing and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level, • Generating test specifications, operator instructions, and technical reports - based on higher-level requirements and information, • Identify remedial and corrective actions, • Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations Your skillset may include: • A good understanding of measurement and test principles, and associated equipment down to component level, • Awareness of electrical/electronic sub-system and system design, integration, and test principles., • An understanding of RF and microwave technology at subsystem level, • An understanding of Environmental testing (including ESS), • Manual handling training, • ESD training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

Manufacturing Electronics Engineer - Bolton Circa £45,000 (depending on experience) On-site – 5 days per week Security Clearance: British Citizen (BPSS required) Copello are working in partnership with a leading defence engineering organisation to recruit an experienced Manufacturing Electronics Engineer to join their established manufacturing team in Bolton. This is a fantastic opportunity to support complex electronic systems across all stages of product assembly, integration and test within a highly technical and collaborative environment. Due to the nature of the work, this role requires full-time on-site presence and successful candidates will need to undergo HMG Basic Personnel Security Standard (BPSS) checks following offer stage. The Opportunity You will join a focused and experienced engineering team responsible for supporting manufacturing operations across assembly, integration and test activities. The role involves servicing Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE). Work is varied, technically challenging and hands-on, covering: • Routine calibrations, • Commissioning of test equipment, • Drift analysis, • Fault finding and repair to component level The team operates in a collaborative environment, working closely with manufacturing, engineering and support functions to resolve both routine and non-routine technical challenges. Ongoing development is encouraged, with structured reviews to support career progression and broaden engineering expertise. About you • HNC/HND (or equivalent) with relevant practical experience, • Strong experience in calibration of test equipment, • Proven ability to maintain and repair test systems to component level, • Ability to interpret technical documentation including drawings, specifications and handbooks, • Good understanding of calibration principles and processes, • Strong analytical and problem-solving skills, • Ability to manage multiple tasks and priorities effectively, • Clear and adaptable communication skills, • Experience with SAP (desirable), • Experience working on Environmental Chambers (advantageous), • Ability to mentor or support junior engineers when required If you're an experienced Electronics Engineer looking for a technically engaging manufacturing support role within a secure and highly respected engineering environment, Copello would welcome your application.

Electrical Fitter 12 month contract Based in Bolton Offering £28.35ph Inside IR35 Are you an experienced Electrical Fitter? Do you hold Electrical Engineering or similar trade certificates? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electrical Fitter, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Certify the product in line with Product Certification procedure, • Certify own work in line with company quality standards, • Maintain product certification and approval via regular audits, • Be fully conversant with all equipment, tools, and measuring instruments associated with the manufacturing cycle, • Ensure manufacturing build, inspection, and where relevant test times are met, • Check and complete all paperwork associated with the manufacturing data pack, • Maintain workmanship standards and product quality, • Ensure compliance with all associated procedures applicable to the manufacturing process Trade Certificates: Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 OR Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 OR Vocational NVQ3 with Further Education, BTEC ONC/HNC Your skillset may include: • IPC 610 certified/ trained preferred, • Possess experience in electrical wiring and assembly, • Previous experience in the aerospace or defence industry would be desirable, • Manual handling training, • Lifting and slinging (including overhead cranes) training, • ESD training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

Automation Engineer Bolton, UK Days £52,000 + Bonus Join a world-class automotive supplier at the forefront of advanced manufacturing, delivering innovative components and systems to major OEMs worldwide. We are seeking a talented and experienced Automation Engineer to drive the next phase of our production excellence in our Bolton facility. In this pivotal role, you will leverage your strong background in PLC programming, process automation, and production engineering to design, implement, and continuously enhance automated systems that boost efficiency, quality, and output in a high-volume manufacturing environment. Responsibilities - Automation Engineer • Design and implement automated processes to optimise production efficiency and throughput, • Analyse existing production processes to identify and apply the most effective automation technologies, • Diagnose and resolve faults in automated production processes and equipment swiftly and effectively, • Manage project budgets, spare parts, and associated expenses, • Partner with Production Engineering and Maintenance teams to implement automated processes and ensure smooth, stable handover to production operations, • Drive continuous development and improvement of production systems, processes, and machine performance, • Lead and support process improvements through structured improvement plans, • Propose and implement efficiency enhancements for machines and production processes, • Monitor performance and task Production Engineers with targeted improvements on the production line, • Plan optimal process flows and operator work methods to maximise output without compromising quality, • Set clear targets for project activities and rigorously track benefits and outcomes Experience & Qualifications - Automation Engineer • Advanced PLC Programming and Fault-Finding expertise (Allen Bradley, Siemens, Keyence, etc.) – ideally qualified to EAL / City & Guilds level or equivalent, • Proven track record in implementing and maintaining PLC systems and automated production processes in a manufacturing setting, • Solid knowledge of robotics, pneumatics, and mechanical systems commonly used in production environments, • Strong logical approach to problem solving and root cause corrective action (RCCA), • Familiarity with formal problem-solving methodologies (e.g., SGA, DMAIC, 7-step, PDCA, 5 Why, Fishbone Diagram) Benefits - Automation Engineer • Discretionary annual Bonus 7.5%, • up to 5.5% employer contribution, • EV Scheme: through salary sacrifice and free charging at site, • Medical Insurance, • Death in Service: 4 x annual salary For more information on this role, please contact Andy Haddon on 01453 796617, or send a copy of your CV to For details of other opportunities available within your chosen field, please visit ___ Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include: Maintenance Engineer, PLC Engineer, Electrical Engineer, Shift Engineer, Shift Technician, Reliability Engineer or field service engineer

Maintenance Engineer Bolton 3 Shift Pattern £48,000 + Bonus A leading global automotive supplier specialising in advanced vehicle components and systems for major OEMs worldwide. Join a world-class team driving the future of automotive manufacturing We are a premier Tier 1 automotive supplier with a strong presence in the UK, delivering innovative, high-quality components to the world's leading vehicle manufacturers. Our Bolton facility is a key high-volume production site focused on precision assembly and testing systems, and we are now seeking an experienced Maintenance Engineer to join our dynamic engineering team. This is a hands-on role ideal for a proactive, skilled tradesperson who thrives in a fast-paced, high-output manufacturing environment. You will play a critical role in maximising equipment uptime, driving continuous improvement, and supporting our commitment to world-class production standards. Responsibilities – Maintenance Engineer • Troubleshooting, repair, and maintenance of high-volume PLC-controlled production equipment, • Planning and performing preventative maintenance on critical assets, • Improvement and modification of assembly/test equipment and transfer systems, • Service and maintenance of electrical and mechanical site services/plant, • Supporting the installation and commissioning of new equipment Experience/Qualifications - Maintenance Engineer • Ideally qualified to ONC/HNC level (or equivalent) in Mechanical/Electrical Engineering, supported by City & Guilds Part 3 (or similar) and NVQ Level 2 & 3, • Time-served apprenticeship in a relevant engineering discipline, • Significant hands-on experience (minimum 2+ years) in high-volume manufacturing environments, • Proven track record in equipment repair, maintenance, and process improvement, • Experience in fitting, fabrication, and machining is highly advantageous, • Strong background in maintenance and fault-finding on PLC-controlled and robotic high-volume equipment (ideal but not essential), • Solid experience maintaining and diagnosing faults in hydraulic and pneumatic systems Benefits - Maintenance Engineer • Discretionary annual Bonus 7.5%, • up to 5.5% employer contribution, • EV Scheme: through salary sacrifice and free charging at site, • Medical Insurance, • Death in Service: 4 x annual salary For more information on this role, please contact Andy Haddon on 01453 796617, or send a copy of your CV to For details of other opportunities available within your chosen field, please visit ___ Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include: Maintenance Engineer, Shift Engineer, Shift Technician, Reliability Engineer or field service engineer

Head of Quality Precision Engineering | Global Group | Multi-Sector Manufacturing Are you a quality leader from a precision engineering background who thrives in a hands-on SME environment? Can you balance the detail of AS9100 compliance with the bigger strategic picture? Do you know how to drive RFT and OTIF performance while building the right culture within your team? We are working on a retained project for a well-established precision engineering business with over 100 years of heritage, part of a global group supplying complex engineered components into aerospace, defence, subsea, industrial and renewables sectors. We’re looking for a Head of Quality to lead a small team of engineers and inspectors, take ownership of the QMS, manage audits, and drive robust root cause analysis and continuous improvement across the site. This is a hands-on leadership role — equally at home on the shop floor as in front of senior stakeholders. You’ll bring: • A strong background in precision engineering manufacturing, • Experience with AS9100 (or equivalent) and audit management, • A track record of improving KPIs such as RFT and OTIF, • The ability to coach, empower and lead a team in the right way If you’re detail-driven but commercially aware, strategic but practical, and ready to shape the future of quality within a respected engineering business — we’d love to hear from you. Key words #quality #qms #rft #otif #engineering #as9100 #qualitymanagement

Supply Chain Manager Bolton or Stevenage 6 month contract - Hybrid £50.00 per hour ARM has an exciting opportunity for a Supply Chain Manager to join a global leader in defence innovation. The successful candidate will bring their experience and knowledge to ensure effective Supplier performance, capability & Risk management Requirement - • Internal and external assessment skills/knowledge; Business maturity, planning & control, relationship management, manufacturing excellence etc…, • Strong interpersonal skills – ability to further develop his / her network, • Very good negotiating and influencing skills, • Objective driven, determination to succeed, • Excellent communication skills: able to communicate verbally, in writing and present to at all levels of business The Role - • Ideally a degree calibre Supply Chain professional with experience of international working in high technology companies., • Experience of supply chain management in the Aerospace, Defence or Manufacturing environments., • Demonstrated ability to improve Supplier Performance (Delivery and Quality)using appropriate tools and lean methodologies, • Managing a portfolio of suppliers on a day to day basis and reporting into designated project the performance and supply chain risk, • Assess supply chain and suppliers capability to meet MBDA delivery profile for both current state vs Future state

Electronics Test Engineer – Defence Sector Salary: Circa £45,000 (dependent on experience) Working Model: Primarily on-site, 4–5 days per week (due to project classification) Location: Bolton We are seeking a skilled Electronics Test Engineer to join a leading defence technology organisation. In this role, you will support the testing and verification of electronic and electrical sub-systems, ensuring products meet the highest standards of quality and reliability throughout the manufacturing process. Key responsibilities include: • Supporting the testing of electronic sub-assemblies, PCBs, and circuit cards during production., • Diagnosing faults and implementing corrective measures to maintain production quality., • Using manual and automated test equipment to verify product functionality., • Generating technical documentation such as test procedures, operator instructions, and reports., • Collaborating closely with manufacturing and design teams to resolve technical challenges. We are looking for candidates with: • HNC, HND, Foundation Degree, BEng/BSc in Electronic or Electrical Engineering (or equivalent)., • Practical experience in electronics/electrical manufacturing test and fault diagnosis., • Experience with test equipment (manual or automated) and systems such as SAP, MES, or ERP., • Strong problem-solving, analytical, and communication skills. This role offers excellent career progression, exposure to cutting-edge defence electronics, and the chance to work in a supportive and dynamic team environment. For further information feel free to reach me at 02895213213, or simply apply! Reference: AMC/RKI

I’m currently instructed on a standout fully remote Clinical Negligence Solicitor opportunity with an award-winning national law firm recognised for its market-leading Health Litigation practice and progressive, people-first culture. The firm has been named a Top Ten Employer for Working Families 2025 for the second consecutive year — a genuine reflection of its commitment to flexibility, wellbeing and long-term career sustainability. This is a rare opportunity to undertake high-quality defendant clinical negligence work on a fully remote basis, without compromising on support, development or progression. The Team You’ll join a nationally recognised Health Litigation team specialising in the defence of clinical negligence claims for NHS Resolution, NHS Trusts and other healthcare providers. The team has received significant industry recognition and is particularly well known for: • Obstetric and neonatal claims, • Complex, high-value brain injury litigation, • Maternity and patient safety matters, • Strategic advisory work within the public health sector This is an excellent opportunity to deepen or develop expertise in technically demanding and high-profile areas of defendant clinical negligence, supported by experienced and respected practitioners. The Role You will manage your own caseload of defendant clinical negligence matters from inception through to resolution. Key responsibilities will include: • Analysing evidence and conducting investigations, • Drafting detailed advice and reports, • Interviewing witnesses and preparing statements, • Instructing experts and Counsel, • Attending CMCs, hearings and conferences (remotely or in person where required), • Negotiating settlements, • Preparing cases for trial and ADR You will also: • Delegate to and mentor junior colleagues, • Assist on higher-value and complex claims, • Maintain strong client relationships, • Deliver client training and presentations, • Contribute to thought leadership and publications, • Support business development initiatives, • Contribute to continuous improvement within the Health practice, • Have the opportunity to undertake client secondments About You This role will suit a solicitor with 3+PQE who is confident managing defendant clinical negligence work and comfortable operating within a remote structure. You will ideally demonstrate: • Experience handling clinical negligence claims (NHS Resolution or MDO exposure desirable), • Familiarity with the Early Notification (EN) Scheme and maternity claims, or a clear desire to specialise in this area, • Ability to work autonomously while remaining collaborative, • Strong understanding of client KPIs and reporting protocols, • Proactive, pragmatic and quality-focused approach, • Excellent organisational and communication skills, • Experience mentoring or supervising junior colleagues, • Strong record of meeting billing and contribution targets, • High standards of confidentiality and data security awareness Why Consider This Firm? Beyond genuine remote working, the firm offers a market-leading benefits package including: ✔ 25+ days’ annual leave ✔ Annual bonus scheme ✔ Birthday privilege day & Christmas shutdown ✔ Holiday buy, sell and carry-over options ✔ Paid charity & pro bono days ✔ Optional private medical insurance ✔ Annual fitness allowance ✔ Pension & ISA savings schemes with independent financial advice ✔ Electric/hybrid vehicle scheme ✔ Health cash plan & Employee Assistance Programme ✔ Enhanced family leave policies ✔ Specialist reproductive health & wellbeing support ✔ Subsidised emergency/back-up care provision ✔ Life assurance & income protection ✔ Bespoke training and development programmes ✔ Financial contribution towards home-working equipment 💬 Interested? This is a rare opportunity to join a top-tier health litigation practice in a role that truly supports remote working, professional development and work-life balance — without sacrificing the quality or complexity of the work. If you’d like to explore this confidentially, including team structure, progression or salary expectations, I’d be very happy to discuss. Please apply via the link or contact Rachael Atherton at G2 Legal Recruitment directly.

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Inspector Subcontractor on an initial 12 month contract. Below covers everything you need to know about what this opportunity entails, as well as what is expected from applicants. Experience with inspecting the work of other people is essential. Job Title:Electrical Inspector Rate:£28.35 rising to £29.70 after 12 weeks Location: Bolton Hybrid / Remote working: Onsite. xrnqpay Standard Days, not shift work Contract:37 Hours per week Overti...

Electrical Wiring Operator Calibration & Maintenance. Our client, a long-standing partner to the UK Ministry of Defence, is seeking an Electrical Wiring Operator to join the Calibration & Maintenance team on a 12-month contract at their Bolton site.

Our client, a trusted partner to the UK Ministry of Defence, is seeking an experienced Supplier Planner to enhance and well-developed Supplier Planning activities aligned to Oliver Wight Class A standards.This role works closely with Manufacturing Operations, Procurement and programme teams to drive

Our client, who is a trusted partner of the UK Ministry of Defence, is collaborating with Guidant Global to find a skilled Mechanical Fitter in Bolton with significant experience in mechanical fitting for carrying out manufacturing and testing tasks within the mechanical department. As a Mechanical

Guidant Global is partnering with our client, a trusted ally of the UK's Ministry of Defence, to recruit a skilled Electrical Calibration Operator.

Our client, a prominent player in the defence and security sector, is currently seeking an Electrical Wiring Operator to join their team in Bolton.

Introduction Saab in UK is growing rapidly, with over 500 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. What you will be part of Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: To drive Operational Excellence throughout the Seaeye business improving efficiency, profitability and customer satisfaction. Together with the Leadership Team, develop the Seaeye Business Strategy facilitating deployment into functional areas and ensuring alignment with the Saab UK and Underwater Business Unit Strategies. Key accountabilities and responsibilities: • Drive the culture of Continuous Improvement and Operational Excellence, • Analyse and measure the effectiveness of existing business processes and develop sustainable, repeatable and quantifiable business process improvements, • Delivery of internal training on Continuous Improvement and Operational Excellence where required, • Research best business practices within and outside the organisation to establish benchmark data, • Collect and analyse process data to initiate, develop and recommend business practices and procedures that focus on enhanced safety, increased productivity and reduced cost, • Determine how Information Technology enhancements can support business processes improvement, • Facilitate the sharing of best practice across the Seaeye organisation, • Drive the short and long term Strategy alignment with Business Unit Under Water (Sweden) and Saab UK Operational Country Unit, • Internally within Seaeye, support Strategy development, rollout, follow up on execution and acting appropriately to feedback received, • Develop, track and report KPIs to support the delivery of the organisation's Strategic Business Plan and Operational delivery performance, • Proven leadership skills, ability to drive change in the organisation, • Excellent communication and interpersonal skills, building strong professional relationships, • Highly motivated self-starter who requires minimal supervision, • Demonstrable experience of implementing effective change in an organisation, • Experience of managing risks and implementing risk management, • Experience of implementing or managing Quality Management Systems and compliance to the requirements of ISO 9001, 45001 and 14001, • Implementation and operation of Operational Excellence methodologies such as Lean, Six Sigma and Kaizen, • To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day to day activities and procedures within the specified role., • To maintain personal ability in, and appropriate use of, all relevant IT (Information and Technology) and other systems required to adequately perform the role., • To act ethically, with integrity and in the best interest of the business at all times, • To maintain a professional and supportive relationship with team members and other departments in order to deliver business objectives or deadlines., • To carry out any other duties as detailed by a member of the management team or authorized representative.

Introduction Saab in UK is growing rapidly, with over 500 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. What you will be part of Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: We are looking for a responsible production engineer for the assembly and testing of PCBs for remotely operated vehicle sub-systems. Ensure appropriate production processes, equipment, and facilities are in place to safely and consistently manufacture products to meet cost, time, and quality requirements. This role is based at our Fareham Campus site. Key Accountabilities and Responsibilities: • Attend SQCDP meetings and support a hands problem solving approach with Area Team Leader and Quality Engineering to achieve OTD and right first time objectives., • Standardise processes and procedures to ensure consistency, minimise variation, and improve cross-department collaboration., • Assess and maintain adherence to safety and compliance standards (ESD, soldering irons, extraction), • Own, document and train others on manufacturing process and standards., • Write build instructions and transfer test specifications into operator instructions., • Commission and programme machines such as Extra eye inspection, paste screening and pick and place (surface mount), board cleaning and reflow oven. Plan inhouse and subcontract maintenance., • Load BOM's into MRP - Structure BOMs and Routings for inhouse and external manufacturing., • Continuously improve production area capability for safety, compliance and efficiency - Create and update test equipment & fixture design, production data and value stream., • Manage NPI transfer and change requests into production., • Senior PCB biased Production Engineer with experience in prototyping, testing and fault finding., • Background in low-volume, one-off engineered products and systems. (Support and training is available for Working with Electrics, High Voltages, and Hydraulics)., • Strong knowledge of electrical equipment relating to products such as rack equipment, power supplies and electronics enclosures with integrated PCBs - Knowledgeable with IPC-A-610 Class 3. (familiarity of Labview, IPC/WHMA-A-620 Class 3 and PUWER beneficial)., • Minimum qualifications HNC/HND or Bachelor's degree in Electrical & Electronic Engineering, Electronic Products, Computer Engineering or relevant experience in Electronic Design, Industrial/Manufacturing Engineering or a related field., • Use initiative to develop effective solutions to day-to-day challenges., • Maintain proficiency in relevant IT systems., • Act ethically and with integrity at all times., • Foster professional relationships and work cross-functionally to meet business objectives., • Perform other duties as assigned by management.

Introduction Saab in UK is growing rapidly, with over 500 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. What you will be part of Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our Saab Seaeye Business Unit in Fareham. The role will aim to provide Production Engineering support for the final assembly and testing of remotely operated vehicles and systems, with a focus on clear, standardised process documentation. In addition, ensure appropriate production processes, equipment, and facilities are in place to safely and consistently manufacture products to meet cost, time, and quality requirements. Key Responsibilities: * Conduct an analysis of current SOPs in the integration department to identify gaps, outdated procedures and areas for improvement. * Standardise process and procedures across the department to ensure consistency, reduce variation, and enhance cross-departmental collaboration. * Own, document and train others on manufacturing process and standards. * Attend SQCDP meetings and support a hands-on problem solving approach with Area Team Leader and Quality Engineering to achieve OTD and right first time objectives. * Assess compliance and adhere to safety/quality standards. * Providing technical support for production and production control. * Developing, optimising and implementing factory floor layouts/production cells. * Analyse data to drive continuous improvement of processes and workflows. Skills and Experience: * Multi-disciplined senior engineer with an electrical bias and experience in test, pre-commissioning, and fault finding. * Background in low-volume, one-off engineered products and systems; ideal for Production, Project, or Delivery Engineers. * Strong mechanical, electrical, and systems engineering knowledge, especially for complex assemblies like ROVs. * Troubleshooting: Technical problem-solving skills to diagnose and resolve production issues. * Minimum qualifications HNC/HND, Bachelor's degree or relevant experience preferably in Electrical, Mechanical, Engineering, Industrial Engineering, Manufacturing Engineering, or a related field. * Hands-on production support experience in assembly, testing, and quality control. * Relevant certifications (e.g., Lean Manufacturing, Six Sigma Green Belt) are a plus; familiarity with hydraulics is also beneficial. Support and training is available for Working with Electrics, High Voltages, and Hydraulics. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Job Description Job Title: Manufacturing EngineerLocation: BoltonContract Type: 12-month contract (likely to be extended)Working Pattern: 37hrs/week, full-time onsite Rates: Umbrella: £35 per hour PAYE: £26.92 per hour + holiday pay Morson is currently recruiting a Manufacturing Engineer on behalf of our defence client based in Bolton. This is an excellent opportunity to join a high-performing manufactu... ZIPC1_UKTJ

Introduction Saab UK is growing rapidly, with over 500 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. What you will be part of Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Role Purpose The Compensation & Benefits Specialist is responsible for supporting the design, implementation, administration, and ongoing management of the organisation's compensation and benefits programmes in the UK. The role ensures reward practices are competitive, compliant with UK legislation, aligned with business objectives, and supports the successful delivery of key HR initiatives, including the payroll transformation project. This role will be a one-year fixed term contract. Key Responsibilities: Compensation • Support the development, implementation, and maintenance of salary structures, grading frameworks, and job evaluation processes., • Conduct market benchmarking using salary surveys to ensure competitive and equitable pay practices., • Provide analytical support for annual pay review, bonus, and incentive processes, including modelling and cost analysis., • Partner with HR Business Partners and hiring managers to provide guidance on pay decisions, offers, promotions, and internal moves., • Manage the day-to-day administration of UK benefits programmes, which may include pensions, private medical insurance, life assurance, income protection, wellbeing benefits, and flexible benefits schemes., • Act as the key point of contact for benefit providers and brokers, supporting renewals, negotiations, and service reviews., • Support the implementation and ongoing administration of benefit policies, including discretionary benefits and allowances., • Support the payroll transformation project, working closely with Payroll, HR, Finance, and external vendors., • Support data cleansing, parallel payroll runs, and user acceptance testing to ensure accurate reward and benefits outcomes., • Ensure all compensation and benefits practices are compliant with UK legislation, including HMRC requirements, auto-enrolment pension regulations, and employment law., • Maintain accurate documentation, policies, and procedures related to reward programmes., • Maintain accurate reward data within HR and payroll systems., • Produce regular and ad hoc reports on compensation and benefits metrics for HR leadership and senior stakeholders., • Support reward-related projects, including system implementations, benefit redesigns, and policy changes., • Identify opportunities to improve reward processes, employee experience, and operational efficiency. Essential: • Proven experience in a Compensation & Benefits, Reward, or HR role with a strong focus on UK reward practices., • Good understanding of UK employment law, HMRC requirements, and pension auto-enrolment., • Strong analytical and numerical skills with the ability to interpret and present data clearly., • Experience working with HR systems and payroll data., • High level of accuracy and attention to detail., • Experience supporting pay reviews, bonus schemes, or job evaluation processes., • Experience working with benefits brokers and external providers., • Knowledge of gender pay gap and equal pay reporting., • CIPD qualification (Level 5 or above) or equivalent experience desirable., • Professional and discreet, with the ability to handle sensitive and confidential information., • Strong stakeholder management and communication skills., • Collaborative, proactive, and solution-focused.

This role is embedded directly on the production line, supporting real-time manufacturing activity. Our client, a trusted partner to the UKs Ministry of Defence, seeks an experienced Manufacturing Controller (lineside focused) to join their Bolton facility. Youll manage the loading, control, and monitoring of work packages in a high-tech environment, applying lean principles such as Kanban and two-bin systems to maintain inventory flow and prevent shortages. Proven experience in stores management, production lineside operations, or manufacturing control is essential, along with strong attention to detail and a focus on operational efficiency. Key Responsibilities: Apply manufacturing control processes and demonstrate proficiency with ERP systems such as SAP. Manage inventory operations, including issuing, receiving, and maintaining stock within a structured stores environment. Oversee stock control and storekeeping, ensuring compliance and monitoring of critical shelf-life items. Load manufacturing cells with scheduled jobs, aligning with lead times, cycle times, and delivery targets. Support packing operations using hand tools and manage tooling for issue and return. Execute kitting activities by assembling and preparing components for efficient production. Safely load and unload goods vehicles, ensuring accurate documentation and smooth material flow. Apply lean manufacturing principles by using Kanban and two-bin systems to manage inventory, ensuring smooth material availability and preventing shortages on the production line. What do you need?: Proven experience in manufacturing control and stores operations within a steady-paced production environment. Flexible and reliable, with the ability to follow detailed instructions and adapt to varying shift patterns. Strong attention to detail and capable of working independently with minimal supervision. Trained in manual handling and Electrostatic Discharge (ESD) procedures to ensure safe and compliant material handling. Certified in lifting and slinging operations, including the use of overhead cranes for safe movement of heavy components. Desirable skills: Demonstrated experience in line-side stores and manufacturing control environments (note: general warehousing experience not applicable). Proficient in PC-based tasks, including strong working knowledge of Microsoft Excel for inventory tracking and reporting. Holds a valid Forklift Truck (FLT) licence and up-to-date medical clearance for operating material handling equipment. Familiar with lean manufacturing principles, including Kanban and two-bin systems for efficient stock replenishment. Experienced in using Enterprise Resource Planning (ERP) systems such as SAP for inventory management and production support. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. TPBN1_UKTJ

Introduction Saab in UK is growing rapidly, with over 500 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. What you will be part of Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our Saab Seaeye Business Unit in Fareham. The role will aim to provide Production Engineering support for the assembly and testing of remotely operated vehicle sub-systems and production processes. In addition, ensure appropriate production processes, equipment, and facilities are in place to safely and consistently manufacture products to meet cost, time, and quality requirements. Key Accountabilities and Responsibilities: * Attend SQCDP meetings and support a hands problem solving approach with Area Team Leader and Quality Engineering to achieve OTD and right first time objectives. * Standardise processes and procedures to ensure consistency, minimise variation, and improve cross-department collaboration. * Own, document and train others on manufacturing process and standards. * Assess compliance and adherence to safety/quality standards. * Maintain manufacturing BOMs & Routings. * Manage NPI transfer into production; develop, optimise, and implement factory floor layout. * Provide technical support for production and production control. * Analyse data to drive continuous improvement of processes and workflows. Skills & Experience: * Multi-disciplined Senior engineer with an electrical bias and experience in prototype wiring, testing and fault finding. * Background in low-volume, one-off engineered products and systems; ideal for Production, Project, or Delivery Engineers. * Strong knowledge of electrical and mechanical engineering, particularly relating to products such as rack equipment, power supplies and subsea pods with integrated PCBs and connection systems. (Familiarity with IPC/WHMA-A-620 Class 3 workmanship standards). * Minimum qualifications HNC/HND, Bachelor's degree or relevant experience preferably in Electrical, Mechanical, Engineering, Industrial Engineering, Manufacturing Engineering, or a related field. * Hands-on production support experience in assembly, testing, and quality control. * Relevant certifications (e.g., Lean Manufacturing, Six Sigma Green Belt) are a plus; familiarity with hydraulics is also beneficial. (Support and training is available for Working with Electrics, High Voltages, and Hydraulics). General Accountabilities and Responsibilities: * Use initiative to develop effective solutions to day-to-day challenges. * Maintain proficiency in relevant IT systems. * Act ethically and with integrity at all times. * Foster professional relationships and work cross-functionally to meet business objectives. * Perform other duties as assigned by management. * Maximise productivity through process improvements and enhanced quality control. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

General Operator (BA) - Microelectronics - Night shift £18.46 £19.46/Hour PAYE £24.78 £26.12/Hour Inside IR35 Umbrella 37 hours; FT (Onsite) Our client, a trusted partner of the UK Ministry of Defence, is looking for a detail-focused General Operator to join their cutting-edge manufacturing team. This role is ideal for candidates with experience in microelectronics assembly, particularly those confident working under a microscope with extremely small components. Youll be part of a high-performing team supporting the production of advanced missile systems, with a focus on precision soldering and assembly of circuit card components. If you have a steady hand, a sharp eye, and thrive in a cleanroom-style environmentthis is for you. Key Responsibilities: Assembling and soldering microelectronic components under a microscope Following detailed manufacturing instructions and quality standards Supporting sub-assembly and certification processes Working across departments including PEC/CCA, looming, plastics, and stores Ensuring compliance with health & safety and ESD protocols Tentatively work across several departments, these might include: Looming: binding wire looming is a cable assembly that efficiently distributes electrical signals by linking cables together using a crimping tool. (Ex; wiring, root wiring, soldering and fibre optics cabling), PEC and CCA Assembly Microelectronics Plastics Department (Ex; applying glues, cutting out intricate patterns, and moulding). Manufacturing Controller/Stores What do you need?: Proven experience in microelectronics or fine-pitch soldering Comfortable working under a microscope for extended periods Strong manual dexterity and attention to detail Ability to read and follow technical layouts and instructions IPC 610 certification (preferred) ESD training (essential) Basic PC and Microsoft Office skills Experience with crimping tools and small-scale assembly Additional skills: Experience utilising a soldering iron and working with manufacturing micro-components Experience using a microscope/magnifying glass What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. Full Time onsite, open to the below: Only Nights Monday-Thursday, 10 hours/night TPBN1_UKTJ

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of: Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. Read more about us ___. The Role: This role will be a part of our Saab Seaeye business in Fareham. In this role you will take responsibility for the full-lifecycle design and development of bespoke power conversion and transmission solutions in line with the company's business needs through innovation, creativity and professionalism. As Lead Engineer you will act as Technical Authority for concurrent power projects: from in-house designs to outsourced specification and management. Key Responsibilities: The role seeks an engineer with excellent knowledge of power architectures, transmission, conversion and distribution, whilst having an appreciation for the real-world subtleties involved in creating robust and reliable power systems. You may be working on anything from large-scale power conversion products, efficient cabled transmission designs all the way through to motor drives and low voltage converters. Our voltages range from 24V to 5000V with powers from 500W to 250kW. You will be responsible for the successful design, implementation and delivery into our products. This may include technically leading small multi-disciplinary teams and therefore the candidate must show an aptitude for directing and coordinating project activities and have strong communication/interpersonal skills. A product-focussed mindset is essential: taking a view across the different engineering disciplines to deliver the most appropriate solution. Our products provide unique challenges in designing non-conventional solutions which can meet size, weight and efficiency demands. Qualifications and Skills: Essential: • Significant Experience in Power Electronics, • Full-lifecycle experience: from concept to tested solution, • Self-starter: taking the lead and having a proactive mindset, • Excellent theoretical knowledge backed up by proven hands-on experience, • Proven knowledge of power transmission: AC and DC, applied to multi-km cabled solutions, • Proven Knowledge of DC converter topologies: Buck/Boost/Flyback/LLC/Full-Bridge, • Proven Knowledge of AC converter techniques: single phase/multiphase, power factor correction, • Experience of power converter product design AC-DC, DC-DC and DC-AC inverters, • Experience working with power switching devices: MOSFET, IGBT, SiCFET, GaNFET and associated drive circuitry, • Experience working with voltages up to 5kV and multi-kW powers, • Experience in designing or specifying custom transformer and magnetic components, • Experience using modelling and simulation packages, • Experience in both digital and analogue design concepts, • Experience of filter design and implementation, • Experience designing/specifying control systems for power conversion, • Knowledge of thermal management techniques, • Knowledge of design-for-compliance, • Experience developing requirements specifications and test procedures, • High Voltage Experience up to 5kV, • Thermal modelling experience, • Motor design principles and control techniques

As a CNC Operator/Programmer you will be responsible for creating CAD drawings for the manufacture of bespoke soft tooling and programme for the CNC routing of soft materials for bespoke Tooling for the Aerospace and defence industries. Are you looking for a new and exciting challenge, with a forwar