Defence jobs in WiganCreate job alerts

Newly Qualified Criminal Defence Solicitor - West Yorkshire - Remote / Hybrid Working - Competitive Salary REF: 936562AL A fantastic opportunity has arisen for a newly qualified solicitor to join a privately funded specialist boutique Criminal defence firm in West Yorkshire. This is an exceptional chance to become part of a forward‑thinking, modern practice where you will work closely with senior solicitors and partners on a high‑quality caseload involving complex, challenging, and often high‑profile matters. You will assist the fee earners with a wide spectrum of criminal defence matters, including drafting documentation, preparing case files, liaising with clients and counsel, and contributing to the management of both routine and high‑profile cases. The Ideal Candidate • NQ (Newly Qualified) Criminal Defence Solicitor, • Strong interest in criminal litigation and defence strategy, • Ambitious, proactive, and committed to delivering exceptional client care, • Confident working independently and collaboratively within a supportive team, • Looking for a long-term career in a progressive and supportive culture, • Police Station Accreditation is desirable but not essential The Benefits • Working exclusively on privately funded matters, • Exposure to high-profile clients, • Remote or hybrid working, • Excellent long‑term development and progression prospects, • Supportive, collaborative team environment and culture, • Travel expenses paid, • Typical working hours 09:00-5:30pm (flexible), • Bonus incentives Apply in the strictest confidence online or via telephone – no CV needed for an initial conversation. Contact: Abigail Lockett, Recruitment Consultant Telephone: 0203 918 1665 Mobile: 07494 821 014 Email:

World Class Defence Organisation is currently looking to recruit a Manufacturing Logistics Services Analyst subcontractor on an initial 12 month contract. Scroll down to find the complete details of the job offer, including experience required and associated duties and tasks. The role will be 4 days per week onsite. Your office base can be either Stevenage or Bolton (depending on your preference). Contract Duration: 12 months initially and then ongoing. xrnqpay Hourly Rate: £40 per hour (Umbrella). Overtime Rate: Hours worked...

Goods Inwards / Incoming Quality Inspector (Stores & Manufacturing) Bolton | Onsite | Defence Manufacturing Why apply? An opportunity supporting a major UK defence programme Clearly defined role focused on goods inwards & stores inspection (not bench/final inspection) ___________________

World Class Defence Organisation is currently looking to recruit 2x Missile Test Architect subcontractors on an initial 6 month contract. Rate: £60.00 per hour Location: Stevenage or Bolton (depending on your preference) Hybrid / Remote working: This role is a hybrid role, 1-2 days a week possibly in lab up to 3 in first weeks Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at time and a quarter Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Missile Test Architect Job Description: The department are looking for experienced test equipment engineers that want to use their knowledge in a system/sub system management role. The role includes determining the project test equipment needs, managing the requirements for test equipment and managing the development through delivery and into service. In this role, you will be responsible for the projects test equipment and reporting into the Chief Design Engineer The department is responsible for the test architecture of our missiles, specifying and analysing the missile built in test, specifying the production testing requirements and managing the specification and delivery of the missile test equipment. Responsibilities: Responsible for defining and implementing the project test strategy Responsible for defining and implementing the project BIT architecture including coverage requirements, BIT timings and system level BIT routines. Responsible for specifying the missile factory pass out testing used to ensure correct build of our product, supporting the manufacturing team with identifying the optimal test stages during production. Responsible for specifying the in service test routines on our missiles. Responsible for generating and managing compliance to the lower level test requirements placed upon design teams including test access needs, BIT coverage/timings and factory test functionality. Responsible for analysing and modelling our system to understand the test coverage and generate diagnostic instructions. Responsible for proposing and recommending, with the Chief Design Engineer, the cost vs test coverage trade-offs. Responsible for producing and maintaining plans for activities within their sphere of responsibility. Skillset/experience required: Ideally educated to degree level with substantial experience of test, electrical or electronic engineering, ideally including at least one of the following: Digital electronics and microprocessor systems. Analogue electronics. Electronics testing. Test equipment design. Good understanding of: Experience in requirements capture. Project management and planning. Stakeholder management. TPBN1_UKTJ

As a CNC Turner at Pailton Engineering, you’ll be part of a team that manufactures safety-critical steering components for leading OEMs across the automotive, defence and heavy‑duty industries. Based at our Coventry HQ, you'll work on a two-shift rotating pattern (mornings and afternoons) and be

Design electronic test equipment used on complex missile systems. Were supporting a leading UK defence partner on the next generation of advanced weapons. This role focuses on designing and delivering electronic test equipment and test systems , supporting them from concept through development and into manufacture. What youll be doing Designing electronic test equipment and test systems for advanced weapon platforms Producing schematics, PCB designs, and compliant engineering documentation Supporting designs through manufacture, including engineering changes and production issues Acting as the technical interface between Design Engineering and Manufacturing What were looking for Degree in Electrical/Electronic Engineering or equivalent industry experience Proven experience designing electronic or test equipment systems Strong background in digital and/or analogue electronics Experience with schematic capture and PCB design Ability to work in structured, regulated engineering environments Desirable Exposure to power electronics, RF, safety electronics or test systems Experience supporting manufacturing or production line activities Familiarity with BS EN standards Defence or highly regulated industry experience (advantageous, not essential) Why join Technically challenging, hands-on electronics design work Clear ownership of design work packages Opportunity to see designs transition into real-world manufacture Long-term programmes in a highly stable sector What happens now? If your application meets the initial selection criteria, a member of our talent acquisition team will contact you via email to arrange a structured screening call. This conversation will explore your experience, technical background, and suitability for the role in more detail. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: Our clients relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. TPBN1_UKTJ

World Class Defence Organisation based in Bolton is currently looking to recruit a Test Equipment Obsolescence Manager subcontractor on an initial 6 month contract. The role will be a hybrid position of 2 days in office, rest of the week remote. Rate: £60 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at time and a quarter Location: Bolton Hybrid / Remote working: Hybrid, 2 days per week onsite and the rest remote from home. Duration: 6 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella) Test Equipment Obsolescence Manager Job Description: We have a phenomenal opportunity for experienced Engineers to play a leading role in the support of production activities at our state-of-the-art manufacturing facilities. Working within Production Design Support (PDS) is a highly rewarding role working close to the manufacturing environment helping to shape the design of the products and test equipment, delivering support to our customers. Responsibilities: Role includes the following responsibilities: Managing Proactive and Reporting Services Implementing Strategy for Obsolescence Management Technical Assessment working with Engineering teams to manage changes Managing Resources and Work load Planning Skillset/experience required: Engineering Degree or relevant experience Knowledge and experience of managing Obsolescence Knowledge and experience of Electronic Equipment Youll be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs. Manage discreet work packages preparing bids, controlling costs and delivering solutions. Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring and a passion for innovation and collaboration. TPBN1_UKTJ

Morson are recruiting on behalf a leading defence equipment manufacturer based in Bolton, Greater Manchester. This is a 12 month contract role initially although highly likely to be long-term. "21.12 rising to "22.12 PAYE PLUS holiday pay (OR "28.35 rising to "29.70 Umbrella) Monday -Friday weekdays 37 hours per week plus overtime. Electrical Test Operator Responsibilities: The Test Operator will be responsible for carrying out test tasks within the operational business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Electrical Test Operator - Specific responsibilities include: • Certify the product in line with Product Certification procedure. • Maintain product certification and approval via regular audits. • Possess a versatile skill base with the capability to apply these skills across a range of tasks. • Carry out setting-up procedures for testing, to include the awareness of the need for periodic recalibration of test equipment. • Carry out tests on electronic equipment in accordance with test instructions, using specified test equipment. • Carry out simple fault-finding procedures on electronic equipment. • Keep test records and reporting faults for rectification. • Ensure manufacturing test times are met. • Check and complete all paperwork associated with the manufacturing data pack. • Maintain to the highest level, workmanship standards and product quality. • Ensure compliance with all associated procedures applicable to the manufacturing process. Skillset/experience required for Electrical Test Operator: Apprenticeship required - Need to confirm apprenticeship served by recognised body, NOTE: Will consider Formal technical engineering/craft apprenticeship to NVQ Level 3 TPBN1_UKTJ

Electrical Calibration Technician Electrical Test Equipment (Defence) Are you an Electrical Calibration Technician with hands on experience calibrating electrical and electronic test equipment such as multimeters, oscilloscopes and power supplies? Guidant Global is partnering with a leading UK defence organisation to recruit an Electrical Calibration Technician to support the calibration and maintenance of Commercial Off The Shelf (COTS) and Special to Type Test Equipment (STTE) used within a highly regulated, safety critical manufacturing environment. This is an excellent opportunity to work on technically challenging equipment that directly supports critical defence programmes. Key Responsibilities: Calibrating and maintaining electrical and electronic test equipment, including multimeters, oscilloscopes, power supplies and function generators Carrying out initial and routine calibration of COTS and bespoke Special to Type Test Equipment (STTE) Ensuring factory and proprietary test equipment remains compliant with documented procedures Completing calibration, maintenance and repair activities in line with departmental processes Producing accurate, traceable calibration and maintenance records to support audit and quality requirements Working collaboratively within a multi disciplined Operations and Engineering environment What do you need?: Qualifications (Essential Pathways) You must hold one of the following: Advanced / Level 3 Electrical, Mechanical, or Manufacturing Apprenticeship OR Level 3 academic qualification (ONC / Diploma or equivalent) AND Level 3 vocational qualification (NVQ) (NVQ not required if a Level 3 apprenticeship standard has been achieved) If you have strong, relevant calibration experience in a regulated or manufacturing environment and are unsure on qualification alignment, applications are encouraged for discussion. Technical experience & skills Experience calibrating electrical test equipment (e.g. power supplies, multimeters, oscilloscopes, function generators) Exposure to calibration of COTS and/or bespoke test equipment Ability to produce clear, comprehensive calibration and maintenance documentation Understanding of in service inspection and testing of electrical equipment Experience working with Environmental Stress Screening (ESS) facilities is desirable Comfortable following manufacturer instructions, procedures and quality standards Familiarity with SAP or similar systems is beneficial (not essential) What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. TPBN1_UKTJ

Automation Engineer Bolton, UK Days £52,000 + Bonus Join a world-class automotive supplier at the forefront of advanced manufacturing, delivering innovative components and systems to major OEMs worldwide. We are seeking a talented and experienced Automation Engineer to drive the next phase of our production excellence in our Bolton facility. In this pivotal role, you will leverage your strong background in PLC programming, process automation, and production engineering to design, implement, and continuously enhance automated systems that boost efficiency, quality, and output in a high-volume manufacturing environment. Responsibilities - Automation Engineer Design and implement automated processes to optimise production efficiency and throughput Analyse existing production processes to identify and apply the most effective automation technologies Diagnose and resolve faults in automated production processes and equipment swiftly and effectively Manage project budgets, spare parts, and associated expenses Partner with Production Engineering and Maintenance teams to implement automated processes and ensure smooth, stable handover to production operations Drive continuous development and improvement of production systems, processes, and machine performance Lead and support process improvements through structured improvement plans Propose and implement efficiency enhancements for machines and production processes Monitor performance and task Production Engineers with targeted improvements on the production line Plan optimal process flows and operator work methods to maximise output without compromising quality Set clear targets for project activities and rigorously track benefits and outcomes Experience & Qualifications - Automation Engineer Advanced PLC Programming and Fault-Finding expertise (Allen Bradley, Siemens, Keyence, etc.) – ideally qualified to EAL / City & Guilds level or equivalent Proven track record in implementing and maintaining PLC systems and automated production processes in a manufacturing setting Solid knowledge of robotics, pneumatics, and mechanical systems commonly used in production environments Strong logical approach to problem solving and root cause corrective action (RCCA) Familiarity with formal problem-solving methodologies (e.g., SGA, DMAIC, 7-step, PDCA, 5 Why, Fishbone Diagram) Benefits - Automation Engineer Discretionary annual Bonus 7.5% up to 5.5% employer contribution EV Scheme: through salary sacrifice and free charging at site Medical Insurance Death in Service: 4 x annual salary For more information on this role, please contact Andy Haddon on 01453 796617, or send a copy of your CV to For details of other opportunities available within your chosen field, please visit Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include: Maintenance Engineer, PLC Engineer, Electrical Engineer, Shift Engineer, Shift Technician, Reliability Engineer or field service engineer Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. TPBN1_UKTJ

Our client, a long-standing partner to the UK Ministry of Defence, is seeking an experienced Manufacturing Bid Manager to play a key role in winning and shaping complex manufacturing programmes. This is a high-impact role sitting at the interface of manufacturing, commercial, and business winning , with direct influence over cost strategy, industrial assumptions, and bid success across major defence programmes. What youll be responsible for Manufacturing Leadership in Bids Lead manufacturing input into bids from early opportunity through submission Define scope, assumptions, and industrial strategy within the Bid Directive Position manufacturing as a value-adding contributor to business winning Costing & Commercial Input Build and validate manufacturing cost models (direct, indirect, materials, overheads) Develop evidence-based 3-point estimates using Excel and historical data Ensure cost assumptions are robust, auditable, and aligned to policy Bid Development & Stakeholder Engagement Produce clear, compliant and competitive bid material (PowerPoint) Assess manufacturing risk, capacity and deliverability across programmes Work closely with New Business, Commercial, Engineering and Operations teams Provide forward visibility of upcoming bids and market intelligence Continuous Improvement & Strategy Apply lessons learned to improve future bids and cost competitiveness Support functional and strategic change within Manufacturing Raise the profile and impact of the Manufacturing Bid Team across programmes What were looking for Proven experience in manufacturing / operations-led bidding within a complex or regulated environment Strong understanding of end-to-end manufacturing (procurement to delivery) Commercially astute, with hands-on experience building manufacturing cost models Confident producing and presenting bid packs to senior stakeholders Able to articulate costing logic clearly and support audit requirements Comfortable working across multiple bids to tight deadlines Proactive, structured, and resilient in a fast-paced bidding environment Backgrounds from defence, aerospace, automotive, rail, or similarly regulated manufacturing environments are particularly relevant. Why consider this role Direct impact on major UK defence programmes High visibility role influencing industrial strategy and cost credibility Work at the heart of business winning, not just delivery Collaborative, senior-stakeholder-facing position What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance : British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. TPBN1_UKTJ

Guidant Global is partnering with a leading UK defence organisation to recruit a hands on Electronics Test Engineer to support the manufacturing test and fault diagnosis of complex electrical and electronic assemblies. This is a practical, production based role focused on diagnosing faults down to circuit card and component level, working directly with test equipment in a manufacturing environment not a desk based design role. What youll be doing Supporting manufacturing test and diagnostics of electrical and electronic sub systems Investigating failures down to circuit card and component level Using a wide range of manual and automated test equipment Introducing and supporting new test facilities, specifications and operator instructions Working closely with production and quality teams to maintain build schedules Contributing to defect reviews and corrective actions within a controlled defence environment What were looking for Essential HNC (or equivalent) in Electronic / Electrical Engineering Strong hands on experience with electronic test and fault finding Good understanding of digital and analogue measurement techniques Experience using equipment such as oscilloscopes, DMMs, signal generators and power supplies Comfortable producing test instructions, specifications and technical reports Desirable (not essential) RF / Microwave exposure at sub system level Experience with automated test equipment (ATE) Environmental or high voltage testing awareness Defence or regulated manufacturing experience SAP exposure Test equipment youll regularly use Oscilloscopes, DMMs, power supplies, signal generators Spectrum analysers / VNAs (where applicable) RF measurement equipment in a controlled test environment Why this role Hands on engineering real faults, real test equipment Stable, long term defence programmes Supportive engineering team Clear processes and production support (not firefighting) What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. TPBN1_UKTJ

Were recruiting an Electrical Wiring Technician to join a specialist Calibration & Maintenance team supporting high integrity defence manufacturing. This is a hands on, bench based role focused on electrical fault finding, bespoke cable repair, and test equipment maintenance ideal for someone with strong wiring, diagnostic, and drawing interpretation skills who enjoys precision work. . What youll be doing Fault find and repair bespoke cable assemblies to technical drawings Carry out surface mount repairs on CCAs Maintain and repair electrical & electronic test equipment to component level Conduct PAT testing across the manufacturing site Perform safety systems testing in line with documented procedures Support production by ensuring STTE availability and reliability Work to strict tool control, FOD, ESD, and quality standards What were looking for Qualifications (Essential Pathways) You must hold one of the following: Advanced / Level 3 Electrical, Mechanical, or Manufacturing Apprenticeship OR Level 3 academic qualification (ONC / Diploma or equivalent) AND Level 3 vocational qualification (NVQ) (NVQ not required if a Level 3 apprenticeship standard has been achieved) Desirable (not essential) IPC 620 certification / Dynamic Cabling training Experience in electrical wiring, cable assembly or test & measurement Background in aerospace, defence, or other regulated manufacturing environments Why consider this role? Technically engaging, hands on electrical work Stable 12 month contract within a long term defence programme Clean, well controlled manufacturing environment Work alongside experienced technicians and engineers What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. TPBN1_UKTJ

Are you an experienced Electrical Test Technician with strong fault finding skills and a background in regulated manufacturing or defence environments? Were supporting a long established UK defence organisation working on mission critical programmes. This role involves hands on electrical testing, certification and fault diagnosis of complex electronic products in line with strict quality and safety standards. Key Responsibilities Electrical testing of electronic equipment and assemblies Test setup, equipment use and calibration awareness Fault finding and basic rectification at equipment level Accurate completion of test records and documentation Working to defined workmanship, safety and quality procedures Essential Experience & Qualifications Completed Level 3 Apprenticeship in Electrical, Electronic, Mechanical or Manufacturing Engineering or Level 3 Engineering qualification (ONC/BTEC) with relevant NVQ Level 3 Proven electrical test experience (mid to senior level) ESD awareness and manual handling knowledge No colour blindness What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. TPBN1_UKTJ

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Test Equipment Design Support Engineer subcontractors on an initial 6 month contract. This role would suit a candidate who comes from a strong Electronics Engineer OR Production Support Engineer OR Test Systems Designer OR Electronics Design Engineer background. Rate: £65.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at time and a quarter Location: Bolton Hybrid / Remote working: 4-5 days a week onsite (possible for remote work occasionally). The department are happy for a Compressed week to be worked, for 4 days per week (Monday to Thursday) Duration: 6 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella) Test Equipment Design Support Engineer Job Description: We have a phenomenal opportunity for experienced Electronic Design Engineers to play a leading role in the support of production activities at our state-of-the-art manufacturing facilities. Working within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of the products and test equipment, delivering support to our customers. Responsibilities: You will act as the interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. Whilst the primary aim is focused on highly advanced module missile programmes and subsystems, there is also scope to work on other unique opportunities including support to launcher assemblies. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of electronics. Skillset/experience required: To be suitable for this role, Individuals will be able to demonstrate a number of the following attributes: Degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Proven experience in the design of one or more of the following disciplines:- Digital and Analogue electronics Power Electronics RF & Antenna Interconnects Safety Electronics Test Systems Schematic design PCB Design Adherence to BS EN Standards Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring and a passion for innovation and collaboration. Youll be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs. Manage discreet work packages preparing bids, controlling costs and delivering solutions. Experience in supporting manufacturing and resolving manufacturing issues is an advantage, but not essential. Investigative skills to be able to find Root Causes of design related issues and propose robust Corrective Actions. Finally, we are looking for someone who has a record of accomplishment of on-time delivery along with good verbal and written communication skills. TPBN1_UKTJ

PLEASE READ BEFORE APPLYING: Please note that in order to be considered for this opportunity you will need to be eligible for SC (Secret Level) UK Security Clearance. Both the role and client site have ITAR nationality restrictions Role Overview: Morson are recruiting on behalf a leading defence equipment manufacturers based in Bolton, Greater Manchester for a time served ELECTRICAL FITTER. This is a contract role although highly likely to be long-term. Rates: £28.35 per hour Umbrella or £21.12 per hour (holiday pay on top of hourly rate) rates rise after 12 weeks to £29.70 per hour Umbrella or £22.12 per hour PAYE Monday - Friday 37 hours + The role will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives *Suitable candidates MUST hold time served apprenticeship, any candidates without apprenticeship WILL NOT be considered* Specific responsibilities include: Certify the product in line with Product Certification procedure Demonstrated ability / willingness to certify own work in line with company quality standards Maintain product certification and approval via regular audits Possess a versatile skill base with the capability to apply these skills across a range of tasks Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle Ensure manufacturing build, inspection and where relevant test times are met. Check and complete all paperwork associated with the manufacturing data pack Maintain to the highest level, workmanship standards and product quality Ensure compliance with all associated procedures applicable to the manufacturing process Maintain a safe working environment Maintain a good housekeeping policy Willing to contribute to an environment of process improvement Role requirements (skills, training and qualifications) Essential: Engineering/ craft apprenticeship ESSENTIAL Possess experience in electrical wiring and assembly Electrical fitting experience Desirable: IPC 610 certified/ trained preferred Previous experience in the aerospace or defence industry would be desirable Manual handling training Lifting and slinging (including overhead cranes) training ESD training TPBN1_UKTJ

Electrical Inspector Defence Manufacturing Location: Bolton, Greater Manchester We are supporting a leading UK Defence manufacturing organisation in their search for an experienced Electrical Inspector to join an established production and certification team. This is a hands-on inspection role, focused on electrical builds, cable assemblies and wiring , working to IPC-610 and IPC-620 standards within a regulated, high-quality manufacturing environment. If you enjoy technical inspection, clear standards, and pride yourself on quality workmanship, this role offers long-term, stable defence work with overtime available. What Youll Be Doing Certifying electrical products in line with approved processes and procedures Inspecting electrical connections, cable assemblies, harnesses and finished builds Identifying faults, damage, surface defects and non-conformances Completing and certifying manufacturing data packs and inspection records Monitoring and supporting operators within the Product Certification Scheme Raising and controlling non-conforming items Supporting audits and maintaining inspection and workmanship standards Working safely and in compliance with all manufacturing and quality procedures What Were Looking For Essential Electrical/Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard or Electrical/Mechanical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) and Electrical/Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved ( These qualifications must meet the standard to be considered for the role ). Several years experience as a skilled person in a manufacturing or inspection environment Experience inspecting the work of others Strong attention to detail and documentation accuracy Desirable IPC-610 and/or IPC-620 certification or working knowledge Experience within Defence, Aerospace or highly regulated manufacturing Manual handling and ESD awareness What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. TPBN1_UKTJ

An opportunity has arisen for a Defence Sales Manager to join a growing advanced engineering and aerospace technology organisation developing highly specialised platforms and systems for defence, security and commercial applications. Existing relationships with defence primes or international defenc

Interested in Defence or Nuclear Engineering? Apply to Register Your Interest. BakerHicks is welcoming expressions of interest from Civil and Structural Engineers who would like to be considered for future opportunities within the Defence and Nuclear sectors. Be included in our future‑talent pool

We have a fantastic opportunity for an experienced Senior Interface Engineer to join a growing SME delivering work on a high-profile nuclear defence programme. This position would suit an engineer with a strong systems or interface background who is experienced in working with complex programmes, id

We are currently supporting a highly innovative UK drone company working on cutting-edge technology for sensitive defence programmes.

Make UK Defence is a growing trade association representing the UK’s defence manufacturing sector. Events Manager – Make UK Defence. We work with government, industry leaders, and supply chain organisations to strengthen the UK’s defence capability and support business growth across the sector

Criminal Defence & Civil Litigation Solicitor – Hybrid Working - London or Midlands – Up to £50,000 (DOE) REF: 934895AL. This role offers the chance to handle a diverse caseload, combining privately funded criminal defence work with a variety of civil litigation matters including contract dispu

Cyber Security GRC Consultant (DV Cleared).Hybrid / Southeast Region - on-site presence required.As a Cyber Security Consultant, you will play a pivotal role in delivering Secure by Design risk and security assurance services within MOD and Public Sector environments.You’ll collaborate with multi-

Senior Project Manager - Defence. We are a leading Engineering and IT consultancy operating across 30 countries, making waves in all sectors: Aeronautics, Space, Defence, Security and naval, Automotive, Rail and mobility, Energy and environment, Life Sciences and health, Industrial Equipment and ele

Consultant – National Security / Defence - eDV required. Exposure to National Security, Defence, CNI or wider Government sectors.

Join Kainos and Shape the Future.At Kainos, we’re problem solvers, innovators, and collaborators - driven by a shared mission to create real impact.Whether we’re transforming digital services for millions, delivering cutting-edge Workday solutions, or pushing the boundaries of technology, we do

Make UK Defence support manufacturing and engineering businesses operating across the UK defence supply chain, helping strengthen capability, improve resilience and create commercial opportunities for members. Fit for Defence programme, while also assisting with the development and management of com

Senior Security Risk / Supplier Assurance Manager - SC cleared Location: Hybrid / 75% on-site presence Contract Type: Permanent & Full-time Salary: Competitive Benefits About the Role The Senior Security Risk Assurance Manager plays a pivotal role in strengthening the organisations security pos

CADM Configuration Engineer (Aerospace/Defence) Poynton, Manchester.

Adoption Lead We are seeking an experienced Adoption Lead to drive platform and service adoption across Defence, enabling developers and teams to maximise value from modern digital capabilities. Key Responsibilities Lead and manage a multi-supplier team of approximately 12 people Own and deliver the

Operating across three distinct product groups namely commercial, defence and business jet products, this role is an opportunity to join a team putting the finishing touches to our highly technical products.

Our client, a leader in the Defence & Security sector, is seeking a Principal Software & Hardware Assurance Practitioner to join their team. As a key contributor to national security programmes, you will impact the future of defence technology by ensuring the safety and perf.

Trainee Cyber Security Course Programme – Job Guarantee Included.Complete online training designed to take you from zero experience to your first Cyber Security role.Study part-time, build fundamental skills, and get dedicated job placement support until you're hired.Flexible financing options

A consulting firm in the construction sector seeks a Cost Engineer to join their UK Real Estate Controls & Performance team focusing on Defence projects.

The ideal candidate will hold a degree in Mechanical Engineering, UK citizenship for security clearance, and experience in defence or aerospace.

ES Recruit is offering an exciting opportunity for a Senior Interface Engineer to join their team working on a high-profile nuclear defence programme in the United Kingdom. Ideal candidates will have a solid background in systems or interface engineering, with proficiency in SysML tools and experien

Defence - Client Manager page is loaded## Defence - Client Managerlocations: GB. In a complex and rapidly evolving environment, with increased UK government focus on Defence investment, the Defence market offers significant opportunities to leverage our global expertise and drive growth. West Glam

Advantage Resourcing UK Ltd is hiring a Manufacturing Project Manager / Bid Lead in Bolton on a 12-month hybrid contract.The role involves generating bids for manufacturing packages, leading projects, and managing stakeholder relationships.Successful candidates will have strong project management ex

A leading aerospace and defense company in the UK is looking for a Senior Product Security Engineer.This role requires experience in security risk management, ISO standards, and a proactive approach to security assurance throughout product lifecycles.The position offers hybrid working, requiring at

This full-time position involves programming, setting, and operating CNC multi-axis turning centres to manufacture high precision components for defence programmes.

This role sits at the heart of Continuing Airworthiness Engineering regulation, underpinning both Preventive and Corrective Maintenance standards that directly contribute to airworthiness and aviation safety across the Defence Aviation Environment. This post carries line management responsibilities

Our UK Real Estate Controls & Performance team has new & exciting opportunities within the Defence sector. We are currently looking to engage with cost engineering professionals with demonstrable experience delivering projects within Defence or other highly regulated industries. Owing to the sensiti