Trabajos engineer electronic en London - Page 2Crear alertas

Better places, thriving communities. About the Role: We are seeking a highly motivated and experienced Senior SCADA and Controls Engineer to build and lead a multidisciplinary team delivering substation automation and control systems for renewable energy projects across the UK. This includes Battery Energy Storage Systems (BESS), solar PV, and onshore/offshore wind projects. The successful candidate will play a key role in the design, integration, and commissioning of SCADA and control systems, ensuring compliance with UK grid codes and industry standards. Key Responsibilities: • Build, lead and mentor a team of SCADA and controls engineers across multiple projects., • Oversee the design, configuration, and implementation of SCADA systems for substations and renewable energy assets., • Develop and review control philosophies, functional design specifications (FDS), and interface control documents (ICDs)., • Produce SCADA IO Schedules, • Produce communications philosophy documents, • Produce site specific communications and SCADA architecture drawings., • Produce or contribute to the production of project specific multicore cable schedules., • Ensure integration of SCADA with third-party systems (e.g., DNO/DSO, NGESO, EMS, BMS, RTUs, PLCs)., • Manage project timelines, budgets, and resource allocation in collaboration with project managers., • Support grid compliance activities including G99/G100, ENA EREC standards, and National Grid requirements., • Coordinate with internal and external stakeholders including clients, DNOs, OEMs, and EPC contractors., • Ensure cybersecurity and data integrity in SCADA and control system architectures., • Conduct FAT, SAT, and site commissioning activities., • Drive continuous improvement and innovation in SCADA and control system design and delivery., • Have an in depth knowledge of energy trading platforms and grid services (e.g., FFR, Dynamic Containment). Essential Skills & Experience: Degree in Electrical, Electronic, or Control Engineering (or equivalent). Proven experience in SCADA and control systems within the power or renewable energy sector. Strong knowledge of substation automation, IEC 61850, Modbus, DNP3, and OPC protocols. Experience with BESS, solar, and wind control systems and grid integration. Familiarity with UK grid codes, G99/G100, and National Grid connection processes. Proficiency in SCADA platforms (e.g., GE, Siemens, Schneider, ABB, Wonderware). Strong leadership, communication, and stakeholder management skills. Willingness to travel to project sites across the UK. Desirable Qualifications: Chartered Engineer (CEng) or working towards it. Experience with cybersecurity standards (e.g., IEC 62443). Knowledge of energy management systems (EMS) and data analytics platforms. Familiarity with battery management systems (BMS) and energy trading platforms. Our market-leading offering provides you with benefits that suit your lifestyle. We have a virtual GP on hand for you and members of your household. So you can get expert advice by video or phone without having to leave your home. We offer financial wellbeing assistance through our Salary Finance scheme. For example, you could access 50% of your earned pay before payday for a small fee. Salary Finance also offers competitive loans. When you join us, we’ll give you a link to our flexible lifestyle benefits platform, Choices. You might choose to purchase up to five extra days’ holiday each year. You might buy critical illness insurance, seek dental treatment or buy technology products at an affordable cost. There are many choices! We give you access to high street discounts from thousands of well-known retailers, gyms and more through our MiDeals platform. And we have a cycle-to-work scheme. Life cover of up to four times your salary is available. We also offer enhanced pension contributions, a save-as-you-earn scheme, and a Mitie Matching Share Plan (you could even be awarded free shares in Mitie). We award our employees with Mitie Stars as recognition for their hard work. There are cash prizes up for grabs each month and at the end of the year there’s a chance to scoop a top prize of £10,000! Our success is a direct result of the experience and quality of our people. Progressing your career is therefore a top priority for us. We offer a diverse variety of training and development avenues via a wide selection of learning resources to suit you. Since 1987, Mitie’s 80,000 employees have been maintaining companies globally. We are the UK’s leading facilities management and professional services company, and our clients range from household names in banking, critical government sites as well as hospitals and schools. Join our Mitie Team. Together our diversity makes us stronger.

Position: Refrigeration Design Engineer (Industrial Refrigeration) Contract: Permanent, Full Time Location: Remote - Based anywhere in the UK (Head office is based in Leicestershire) Salary: up to £75K plus company car or cash allowance & benefits & performance bonus Industry: Industrial Cooling & Refrigeration – Food/FMCG, Cold Storage & Logistics, Data Centre PRS Engineering has engaged with a key client and a leading Industrial Cooling & Refrigeration specialist operating and delivering high value projects across the UK with headquarters based in Leicestershire. Due to team expansion and winning new projects, we are seeking an Industrial Design Engineer with a background in Ammonia, CO2 Systems, Industrial Cooling Technologies &/or Industrial Refrigeration to support business requirements and oversee key projects. This is a remote working role with occasional attendance at the Leicester office will be required as will site visits and site surveys. The Role: To design and propose industrial refrigeration systems for food manufacturing facilities and logistics cold storage centres. Detailing costs and designs to customers while meeting legislative and customer-specific requirements. To create comprehensive designs from initial briefs and/or drawings, whilst adhering to the latest company and industry standards. Produce detailed design work, consisting of but not limited to: cold room and facility heat load calculations, equipment selections, pumped circulation system design, P&ID development and approvals, concept design presentations, sales stage design applications, engineering specification sheets, pipework isometric drawings, and pipe sizing for ammonia refrigeration systems. This is a remote working role, but attendance at the Leicester office will be required as will site visits, surveys, and client presentations. Main Responsibilities • Carry out site surveys where required, • Generate and update enquiry bank, • Attend customer scoping and design meetings where required, • Produce initial outline design/scope, • Produce Design File (electronic or hard copy) in line with ISO 9001 standard, • Produce detailed design post sales stage and convert into live project for delivery team, • Conduct heat load calculations, produce engineering sheets and pipework isometric, • drawings, equipment selections and pipe work sizing, • Produce supplier/sub-contractor enquiries for quotations, • Produce data for Design of Contracts project handover including: Equipment/supplier/sub-contractor procurement schedule, identify PED category of system and inform compliance team if CAT 4, calculate system refrigerant charge, produce high level program of works and high level phasing with support of delivery team, • Raise Contract Approval Form to enable project to be booked on system, • Mark up drawings and issue to CAD department to produce, • Attend site at least once during project installation period, to carry out design review, • Assist PM during delivery phase for design queries, • Maintain excellent service levels at all times, ensuring a “first Class” service to all customers, • Take on projects as and when required and see them through to successful completion Financial • Produce estimates in line with customer budgets and to agreed company margins, • Produce formal scope of works and formal quotations, • Assist CM with project variation design and costs All contracts over £500k to have contract/design review with senior member of staff, • To identify means of generating extra revenue through new initiatives (forward thinking) People • One to one session with line manager once a quarter, • To treat other colleagues, managers, customers and other stakeholders equally and with courtesy and respect at all times, • Where possible - to assist others with tasks that may be outside of the scope of your role, • To assist with coaching other colleagues/managers, for cross training purposed in your area of expertise Compliance • Ensure that all relevant company and legislative policies and best practices are adhered to and always maintained, • Inform the relevant Manager of non-conformances and ensure that corrective action is taken, • Ensure compliance with all procedures throughout within your remit, • Produce Design File (electronic or hard copy) in line with ISO 9001 standard, • To ensure Refrigeration industry codes and standards are upheld, • To comply with environmental policies and putting forward new ideas for, • improving environmental efficiencies., • Adhere to Group H&S procedures with due regard for business constraints and efficiency

I am excited to partner with a leading power protection company who have an immediate requirement for a Service Engineer in the South. The successful Service Engineer must be willing to travel and stay away from home overnight occasionally. Candidates will ideally live within 50 miles of the M25 and will travel to customer sites in the South (including London) carrying out service, maintenance and repairs to the companys range of equipment. Candidates living in or close to the following locations are of particular interest, Watford, Bishops Stortford, Bletchley, Buckingham, Bedford, Luton, Slough, Reading, Swindon, Crawley, Camberley, Guildford, Horsham, Maidstone or close surrounding areas. Due to the nature of the role candidates will need to undertake and pass security checks. This is an exciting opportunity for engineers leaving the military with an electronic bias. In return you will join an established company and friendly engineering team where you will manage your own work schedule and time. The role comes with an attractive salary and benefits package. Service Engineer Requirements: • Hold a relevant recognised Electronic/Electrical engineering qualification to Level 3 as a minimum., • Proven experience of working with electronic equipment with a strong technical understanding of electronics and electrics., • Able to read and interpret electrical ...

AYES is looking for a Software Engineer AYES, an international engineering and technology consultancy founded in Italy, is continuing its growth and expanding its UK team. We are looking for a Software Engineer experienced in SW development, embedded systems, and software engineering for complex technical projects. ⚡ Your profile • University degree (BSc or MSc) in Computer Science, Software Engineering, Electronic Engineering, or a related field., • Minimum of 3 years’ experience in software development, with a strong focus on C++ and embedded systems., • Experience developing software for real-time or safety-critical systems., • Familiarity with software architecture, testing, debugging, and version control tools., • Availability to work in the South of the UK. 🌍 About AYES We are an international consultancy specialised in the Aerospace, Rail, Automotive, Energy, Naval and Defence sectors. Our team combines experience, innovation, and a global vision to deliver high-value engineering solutions for international projects. 🚀 What we offer • The opportunity to join a company in the midst of international growth., • A dynamic, collaborative environment focused on professional development., • High-impact projects across Europe and the United States., • Real opportunities for career growth and advancement. If you are passionate about software engineering, enjoy developing complex systems, and want to grow in a global and innovative environment… SAY YES AND GROW WITH AYES!

About the Company Akkodis is a global leader in engineering, technology, and R&D, harnessing the power of connected data to drive digital transformation and innovation for a smarter, more sustainable future. As part of the Adecco Group, Akkodis employs over 50,000 engineers and digital specialists across 30 countries in North America, EMEA, and APAC. Our teams bring extensive cross-sector knowledge in critical technology areas such as mobility, software services, robotics, simulations, cybersecurity, AI, and data analytics, enabling clients to tackle complex challenges in today’s rapidly evolving markets. With a comprehensive solution portfolio across four service lines—Consulting, Solutions, Talents, and Academy—Akkodis supports clients from concept through to full-scale deployment and optimisation. Our diverse offerings help organisations rethink product development, accelerate productivity, reduce time-to-market, and prepare for the future. At Akkodis, you’ll join a dynamic environment that values continuous learning and global collaboration, where you can make a meaningful impact through innovative projects that shape the future of technology. About the Role The FPGA Engineer will contribute to the development, recovery, and certification support of FPGA-based designs for aerospace platforms, with a strong focus on legacy systems and board bring-up activities. The scope includes reverse engineering existing FPGA implementations, developing firmware from hardware requirements, and supporting integration of FPGA designs onto new or existing boards. Responsibilities • Lead FPGA development for legacy aerospace designs, including reverse engineering, and board bring-up activities., • Develop firmware requirements from hardware requirements., • Work closely with hardware teams, supporting early-phase board design and integration., • Ensure designs and deliverables comply with DO-254 aligned processes., • Support generation of design/certification documentation (PHAC), verification strategy, and accreditation discussions (SOI) for low-complexity designs. Qualifications • Bachelor’s degree in Electronic Engineering, Electrical Engineering, Computer Engineering, or a related discipline. Required Skills • Strong FPGA experience using VHDL, including Xilinx or Microchip devices., • Proven experience working from limited or legacy design information., • Experience working in regulated aerospace or defence environments (DAL-D)., • Awareness of DO-254 or similar hardware certification standards is an advantage.

Plessey has a long history of innovation. Founded in 1956, we have evolved from one of Europe’s earliest semiconductor pioneers into the world’s most advanced microLED specialist. Over the decades, Plessey has built a first class, fully integrated platform designing, manufacturing, and engineering next-generation display technologies entirely in-house. This end-to-end capability, combined with our strong IP portfolio, uniquely positions us to lead the scaling of MicroLED’s from lab innovation to high-volume production. Our future is even brighter. We believe MicroLED’s will define the next era of technology—powering ultra-efficient AR/VR displays, driving optical processors that make AI faster and more sustainable, and enabling devices yet to be imagined. With our unique expertise and talented team, we are positioned to lead this transformation. It’s an exciting time to join us: Plessey has recently been acquired by Haylo Labs, accelerating our growth and opening new opportunities. Our Values • Lead, • Grow, • Trust Location Located at our head office and state-of-the-art fabrication facility in Plymouth. About the Role We are seeking a senior Embedded Software Engineer to join the Product Development team and contribute to embedded firmware development and hardware–software integration. This is a hands-on role, working closely with the Principal Engineer and Senior Hardware Engineer to translate system architecture into reliable embedded implementations across prototypes, demos, and product platforms. Key Responsibilities • Design, implement, and maintain embedded firmware in C/C++., • Develop and maintain low-level drivers and application firmware., • Support bootloader development and firmware update functionality., • Implement firmware robustness, error handling, and recovery paths., • Support firmware bring-up on new hardware., • Debug hardware/firmware issues involving power, clocks, interfaces, and timing., • Work with schematics, PCBs, and lab equipment during development and debugging., • Support validation and test readiness of embedded systems., • Translate architectural intent into working embedded implementations., • Take ownership of defined subsystems with appropriate guidance., • Contribute to technical documentation and knowledge transfer., • Support integration with test environments and higher-level software systems. Skills, Knowledge and Expertise • Background in Electronic Engineering or similar discipline., • Experience in embedded software development (C/C++)., • Experience with microcontrollers (e.g. STM32 or similar)., • Experience with bare-metal and/or RTOS-based systems., • Comfortable reading schematics and understanding hardware design., • Experience with board bring-up and low-level debugging., • Experience using SWD/JTAG, logic analysers, and oscilloscopes., • Understanding of common interfaces (USB, SPI, I²C/I3C, UART). Advantage • USB device development experience., • Familiarity with embedded Linux or Zephyr., • Experience supporting prototype, demo, or pre-production systems.

Field Service Engineer We have a new and exciting opportunity to support our client’s national technology rollout, and we are hiring multiple Field Service Engineers to join a growing UK team. In this role, you’ll be responsible for installing, servicing, and maintaining advanced capital equipment that will soon become a familiar feature in local environments nationwide. This is a hands‑on, customer‑facing position where your technical expertise and problem‑solving skills will directly support the success of a major sustainability initiative. 🌍 About the Organisation The employer is a long‑established global leader in sustainable technology. With more than 30 years in the industry, they design, manufacture, supply, and service their systems that are used in over 40 countries. Their solutions support circular‑economy goals and help minimise carbon emissions. ⭐ Why Join? • Meaningful impact: Work on technology that directly impacts emissions., • Global expertise: Join a market‑leading organisation with a strong international footprint., • Career growth: Rapid expansion creates genuine opportunities for progression., • Empowered culture: A collaborative, inclusive environment where people are trusted, supported, and encouraged to grow., • Strong support package: Fully equipped van, tools, devices, workwear, and fuel card provided. 🔧 Key Responsibilities • Install capital equipment at customer sites., • Train store teams on machine operation and best practices., • Carry out routine servicing and preventative maintenance., • Attend breakdowns and complete timely, professional on‑site repairs., • Submit accurate digital work reports., • Maintain safety standards and complete housekeeping documentation., • Conduct system audits and on‑site evaluations., • Support warehouse capacity planning in collaboration with Sales., • Manage spare parts storage and stock levels., • Ensure all company equipment is kept secure., • Comply with all Health & Safety requirements. 🛠️ Skills & Experience • Minimum 3 years’ experience as a Field Service Engineer (installation & maintenance)., • Strong IT and system‑integration skills., • Good understanding of mechanical and electronic processes., • Excellent written and verbal communication skills., • Confident using email, online platforms, and completing digital inductions., • Full UK driving licence., • Positive, proactive “can‑do” attitude. Additional Requirements • 2+ years’ experience working with Linux., • 3+ years’ engineering experience., • Ability to commute to the role’s operating region., • No visa sponsorship available., • Must be authorised to work in the UK. 🕒 Working Conditions • Monday to Friday as standard., • Occasional evening and weekend work required for installations or urgent service., • Flexible working arrangements available., • Fully equipped company van, phone, laptop, tools, workwear, and fuel card provided. If this role interests you, please apply now.

Senior Analog Design Engineer – Power & Mixed-Signal Systems We are currently partnered with a leading technology company looking for a Senior Analog Design Engineer to strengthen their team, focusing on the development and verification of advanced power-management circuits for next-generation connectivity and audio products. This role will be full time on-site Key responsibilities • Design and implement analogue sub-circuits and power-management blocks, including regulators, converters, and associated IPs, • Collaborate with cross-functional teams to gather requirements and provide documentation supporting system-level integration and testing, • Contribute to high-level architecture discussions and define technical strategies for new features or product enhancements Key requirements • Bachelor’s or Master’s degree in Electrical/Electronic Engineering or related discipline, • Analogue design experience, ideally with power-management IPs such as SMPS and LDOs, • Solid understanding of analogue design principles and verification methodologies Keywords: Analog Design / Power Management / LDO / SMPS / Mixed-Signal / Verification / Sub-Cell Design / Cadence / Mentor Graphics / MATLAB / System Architecture / Connectivity / Audio / VLSI / Cross-Functional Collaboration If you are interested in this position, please send a CV to By applying to this role you understand that we may collect your personal data and store and process it on our systems. For more information please see our Privacy Notice ___

Join Our Dynamic Team in the Pharmaceutical Industry! Are you an enthusiastic engineer with a passion for medical technology? Do you thrive in a fast-paced environment? If so, we have an exciting opportunity for you! Our client is seeking a Product Support Installations Engineer for a fixed-term contract of 6 months. This role offers a competitive daily rate ranging from £200 to £250. Key Responsibilities: • Undertake on-site support visits for installations, de-installations, and relocations of critical instruments., • Deliver high-quality installations while adhering to customer policies and safety standards., • Engage with customers to address queries and ensure effective communication with the wider business., • Maintain calibrated tools and equipment, ensuring compliance with service activities., • Provide first-level troubleshooting support, using your technical skills to solve issues promptly. What We’re Looking For: Essential Qualifications: • A qualified engineer in electrical engineering, medical technology, or a relevant Biomedical Science degree., • Full UK/EU driving licence and a valid passport for overseas training. Core Competencies: • Strong electrical, electronic, and mechanical understanding., • Proven ability to manage personal time and prioritise tasks effectively., • Excellent communication skills, both written and verbal, with a flair for teamwork and collaboration., • A logical, process-driven mindset with an attention to detail., • Enthusiastic about challenging technologies, including robotics and medical issues. Desirable Skills (but not essential): • Initial experience in a medical technical environment., • Familiarity with medical analytical systems and quality assurance., • Experience with Customer Relationship Management (CRM) tools and web delivery applications., • Customer-facing engineering support experience. Why Join Us? • Be part of a collaborative team that values integrity, courage, and passion., • Gain exposure to cutting-edge technologies in the diagnostics industry., • Opportunities for personal growth and professional development through structured training., • Enjoy a supportive work environment with a focus on continuous improvement. Who You Are: • A quick learner with a curious mind, eager to innovate and contribute ideas., • Resilient and adaptable, thriving in a changing environment., • Committed to achieving results and accountable for your commitments. Note: This position requires regular overnight stays throughout the UK and Ireland. Ready to Take the Next Step? If you’re excited about joining a team that makes a difference in the healthcare sector, we want to hear from you! Apply now to embark on a fulfilling journey with us. We use generative AI tools to support our candidate screening process. This helps us ensure a fair, consistent, and efficient experience for all applicants. Rest assured, all final decisions are made by our hiring team, and your application will be reviewed with care and attention. Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you.

About the Role We are seeking an experienced Tendering Engineer to support our directors in producing high-quality proposals across all business verticals. This is a key role in shaping our success pipelinecombining technical expertise, commercial awareness, and excellent communication skills. The ideal candidate will have strong experience in PLC/SCADA control systems , exposure to M&E installations , and a proven track record in producing tenders for engineering projects. You will help develop our tendering processes, prepare professional submissions, and support the wider sales function. Key Responsibilities Tender Production & Management Monitor tender portals and input opportunities into the CRM. Produce tenders for minor projects, including: Compiling accurate costs Developing tender programmes Producing final commercial and technical proposals Assist directors with larger, more complex tenders. Respond to structured tender questionnaires, including sections on sustainability, social value, and governance. Documentation & Templates Manage and improve standard costing templates. Maintain and develop proposal templates and supporting documents. Sales & Reporting Chair monthly sales meetings. Maintain the CRM with accurate, up-to-date information. Prepare monthly and annual sales reports. Administrative & Client Support Keep sales documentation organised and easily accessible. Handle incoming sales enquiries. Manage client visits. Develop sales material such as testimonials and case studies. About You Education Minimum HNC in Electrical, Electronic, Software, or related engineering discipline. Skills & Experience 510 years experience in a tendering or proposals role. Solid understanding of PLC/SCADA systems. Proficiency in Microsoft Word and Excel . Proficiency in Microsoft Project for programme development. Excellent organisational skills and exceptional attention to detail. Strong written and verbal communication skills. Comfortable working both independently and collaboratively. Why Join Us? Opportunity to influence and enhance our tendering and sales processes. Work across a diverse range of engineering projects. Collaborative team environment with strong support from leadership. Clear scope for professional growth and increased responsibility. How to Apply Please send your CV and a brief cover letter. We look forward to hearing from you! TPBN1_UKTJ

We are recruiting on behalf of a global aerospace and precision engineering organisation with a strong reputation for technical excellence, innovation, and employee development. This organisation offers a high-performance yet supportive culture, where engineers are trusted to take ownership, solve complex challenges, and make a real impact. Employees benefit from meaningful work, long-term career development, and an excellent quality of life both inside and outside of work. The Opportunity As a Senior Product Engineer, you will play a key role within the Product Engineering function, acting as the technical focal point for resolving complex issues across design, assembly, test, sustainment, and new product introduction. The role is central to the successful introduction of new products into production, continuous improvement of manufacturing processes, and the assessment of in-service hardware returning from the field. You will lead product and process changes, analyse production data to identify improvement opportunities, and ensure processes remain capable, controlled, and aligned with customer and regulatory requirements. Key Responsibilities Act as technical authority for complex production, assembly, and test issues Support New Product Introduction (NPI) and sustainment programmes Lead product and process improvement activities to enhance performance and reliability Analyse manufacturing and quality data to drive continuous improvement Apply APQP methodologies, supporting PPAP submissions Create and maintain PFMEA, Control Plans, and Process Flow Diagrams throughout the product lifecycle Develop Assembly & Test processes, procedures, and tooling concepts Support flow-line and single-piece Assembly & Test environments Investigate aftermarket products returned from service Train and mentor Assembly & Test Technicians Work closely with manufacturing, quality, and supply chain teams About You We are keen to speak with experienced engineers who enjoy ownership, leadership, and hands-on technical problem-solving. You will ideally have: A degree in an engineering discipline (or equivalent experience) Proven technical and project leadership experience Strong understanding of mechanical and hydraulic systems Ability to interpret technical drawings, specifications, and design intent Experience developing assembly and test processes Broad understanding of mechanical, electronic, and hydraulic testing principles Hands-on experience with PFMEA, Control Plans, and APQP tools Proficiency in Minitab, MS Project, and MS Excel Excellent communication and stakeholder engagement skills A proactive, organised, and self-starting approach Whats On Offer Competitive salary and flexible benefits package 33 days annual leave (including bank holidays) Private medical insurance, mental health support, and financial advice Generous pension contribution (from 6%) and life assurance Employee share options EV charging and onsite facilities Structured training and clear career progression Flexible working hours through a flexi-time system Apply Now Applications are reviewed on an ongoing basis, and this position may close early once a suitable candidate is identified. Early application is recommended. This is an excellent opportunity for a Senior Product Engineer seeking technical depth, leadership responsibility, and long-term career development within a world-class aerospace environment. TPBN1_UKTJ

About The RoleJob Title: Field Service Engineer - DartfordDivision: Wastekit Purpose of RoleService Engineers are responsible for servicing and maintaining recycling equipment on a reactive and scheduled basis. They will work towards achieving their own targets as well as customer SLA’s. Service level agreements are agreed and set with our customers and must be achieved. Service Engineers will work closely with the Service Planning Supervisor, Technical Manager and Operations Director to ensure an efficient and safe delivery. Customer Service • To liaise with the call controllers and Field Service Supervisor’s to provide the best service to the customers., • The engineer is expected to help plan their daily work to maximize customer service, achieve the highest standards and productivity using electronic and verbal communications as appropriate., • The engineer should always try and take ownership of engineering issues so that the customer is provided with good service., • Engineers are expected to achieve targets set by their Field Service Supervisor and be aware of all customer service level agreements and aim to adhere to them always., • Maintain confidentiality and discretion always., • Carry out any reasonable task deemed necessary., • May be required to work out of area during periods of varying workload volumes and during engineer shortages which can require overnight stays., • Always carry your ID and any Health and Safety accreditation (cards) when at work.Records and Documentation, • To accurately and clearly complete all paperwork and electronic data as required by Wastekit or the customer according to the company procedures., • Accurately record time, parts used and any other details either electronically or manually as required., • Prompt action should be taken to ensure replacement parts are acquired to replenish van stock or parts specially ordered to return to a breakdown being mindful of any customer SLAs., • Pass on any new business leads to sales department.Skills/Knowledge and Qualifications Required, • Shall have good fault-finding and diagnostic skills, • To be able to understand hydraulic and electrical circuit diagrams., • Will be able to show and apply sound knowledge of mechanical, electrical and hydraulic principles, • Can use and understand various electrical and hydraulic test equipment, • Be aware of the Company’s procedures and adhere to them always., • To pass on any technical knowledge that may help other engineers., • Use good engineering practice and standards always., • Update engineering knowledge when able., • Always use cost effective but safe measures to carry out tasks., • Can work with the minimum of supervision., • To attend meetings and training courses as required by your Field Service Supervisor.Standards, • Comply with all requirements in the Work Instruction for Engineer Responsibilities., • Comply with instructions given by Field Service Supervisors, Managers and Directors., • To maintain and use company issued equipment and vehicles in a safe manner and according to PHS Group policies., • To take responsibility for the safe keeping of stock and be accountable for stock balances., • To keep accurate records (using stock usage sheets and or electronic recording as appropriate) of when and where the stock is used., • Ensure correct uniform is worn and kept in clean condition and always use PPE when it is required., • Any documentation which is required to be returned to the office is done so in time., • Vans should be kept clean, tidy and maintained as per MFM-02 Commercial Vehicle Transport Policy and appropriate care taken of PPE, tools and stock.Desirable Knowledge and Qualifications, • Ideally from a service engineering, electrical or hydraulic background with an ability to demonstrate the skill of fault finding and repair., • City & Guilds in electrical and mechanical engineering., • Competent in the use of electrical and hydraulic test equipment., • A sound knowledge of single and three phase electrical equipment and hydraulic circuits., • A mature disciplined approach and good personal administrative and customer care skills., • 17th edition electrical regulations/City & Guilds electrical and mechanical engineering.

Lead Power Electronics Engineer Eastbourne, East Sussex Salary up to £65,000 + Bonus up to 7.5% KO2's client, a well-established and financially stable engineering organisation, is looking to recruit a Lead Power Electronics Engineer to join their engineering team in Eastbourne. This is an exciting opportunity for a highly experienced electronics engineer to take a technical leadership role in the design and development of advanced electronic systems. Due to the hands-on nature of the hardware development and testing, this role is fully onsite in Eastbourne and offers the chance to work closely with multidisciplinary teams across engineering, product management, and operations. As a Lead Power Electronics Engineer, you will play a key role in driving the design, development, and delivery of innovative electronic solutions across multiple product lines. Acting as a senior technical authority within the team, you will guide engineering decisions, ensure best practices in electronics design, and support the successful transition of products from concept through to production. You will work closely with engineers across multiple disciplines, mentor colleagues, and contribute to the delivery of high-performance, reliable electronic systems that meet both business objectives and regulatory requirements. Key Responsibilities Lead the design and development of advanced electronic systems, ensuring high standards of performance, reliability, and manufacturability Maintain awareness of product roadmaps and technology developments, identifying opportunities for innovation and future product improvements Integrate advanced electronic techniques and design approaches to enhance product capability and competitiveness Ensure a holistic approach to product development, balancing design optimisation with manufacturability, quality, and reliability Provide technical leadership and mentorship to engineering team members, promoting best practices and guiding projects to successful completion Lead the resolution of complex technical challenges, using structured problem-solving and root cause analysis techniques Collaborate with product management and cross-functional teams to define and deliver new product capabilities within project timelines Work closely with external suppliers and technical specialists to incorporate new technologies and strengthen the team's knowledge base Skills & Experience Required Bachelor's or Master's degree in Electrical Engineering, Electronics Engineering, or a related discipline Strong experience in electronic circuit design, including both analogue and digital systems Significant experience working in global, multi-disciplinary engineering environments Expertise in analogue electronics design, including areas such as low-noise amplifiers and RF amplifier design Strong understanding of high-speed digital design principles Experience designing high voltage electronic circuits and instrumentation Experience working with microcontroller-based systems (e.g., ARM, DSP architectures) Knowledge of high-speed communication interfaces such as I2C, SPI, UART, Ethernet, RS485, RS232, CANopen, and fieldbus technologies Experience using schematic capture and PCB layout tools such as Altium or OrCAD Experience working within regulated or compliance-driven industries or high-reliability environments (e.g., aerospace, medical, industrial systems) Understanding of product safety and electromagnetic compatibility standards such as EN 61010 Strong understanding of product development processes and the ability to recommend improvements Desirable Experience Membership of a professional body such as the IET, or working toward Chartered Engineer status Experience using engineering or product lifecycle tools such as SAP or Silicon Expert Experience working within Agile (SCRUM) and Waterfall project management frameworks Experience working closely with suppliers and external technology partners Why Join KO2's Client? Salary up to £65,000 plus bonus up to 7.5% Work within a stable and globally established engineering organisation Opportunity to take a technical leadership role in complex electronics development Work alongside highly skilled multidisciplinary engineering teams TPBN1_UKTJ

Are you an experienced Electronic Test Engineer with a strong background in electronic manufacturing and production test? This is an exciting job opportunity to join a globally recognised leader in switching and instrumentation technology, working at the forefront of the test and measurement industry. Based in Clacton-on-Sea, this role sits within the Production Test team and plays a critical part in validating and verifying high-performance electronic products used across aerospace, automotive, energy, defence, and commercial electronics sectors worldwide. Key responsibilities of the Electronic Test Engineer job based in Clacton-on-Sea: Execute formal test procedures on PCBAs, embedded systems, and finished products, ensuring compliance to specification. Perform component-level fault finding, analysis, and repair. Produce detailed fault reports to support continuous product improvement. Maintain accurate test records in line with ISO 9001 and internal quality procedures. Develop test programs and operate Automated Test Equipment (ATE). Provide structured feedback on build quality to the Test Team Leader. Skills and experience required of the Electronic Test Engineer job based in Clacton-on-Sea: Strong experience in electronic test methodologies, diagnostic tools, and lab equipment. Experience in RF and microwave testing. Knowledge of relevant standards including ISO 9001 and IPC. Strong analytical and problem-solving skills with excellent attention to detail. Ability to work effectively in a fast-paced, collaborative environment. Awareness of high-voltage and RF testing requirements (desirable). This is an excellent opportunity for a skilled Electronic Test Engineer seeking a technically challenging role within a high-quality manufacturing environment where innovation, precision, and reliability are paramount. To apply for the Electronic Test Engineer job based in Clacton-on-Sea, please send your CV to or for more information, call Ben on 01582 878816. TPBN1_UKTJ

Job Description: Job Overview We are seeking a skilled and proactive Equipment Engineer to support the repair, maintenance, and optimisation of semiconductor processing machinery. The successful candidate will play a key role in ensuring high equipment uptime within a fast-paced, 24/7 manufacturing environment. Working closely with engineering and production teams, this role offers an excellent opportunity to contribute to continuous improvement initiatives while developing advanced technical expertise. Duties Perform and coordinate the repair and maintenance of semiconductor processing equipment. Maintain greater than 80% uptime of key process tools. Fault-find and repair complex machine tool PCBs to component level. Support and guide technician-level personnel, Manufacturing Shift Leaders, and production staff. Monitor, evaluate, and improve equipment performance and reliability. Collaborate with Equipment Engineering Supervisors, Process Engineers, and Operators to resolve issues efficiently. Identify and implement cost reduction and continuous improvement projects. Ensure all work is carried out in line with safety policies and procedures. Requirements Minimum HNC/HND (or equivalent) in Engineering, Science, Mathematics, Material Science, or a related field. Proven experience in equipment maintenance within semiconductor or similar environments. Strong knowledge of electronics with the ability to diagnose and repair PCBs at component level. Solid understanding of mechanical systems and maintenance practices. Experience with wafer fabrication processes or cleanroom environments (preferred). Familiarity with equipment such as Epitaxy, Ion Implant, or Passivation systems (advantageous). Knowledge of continuous improvement methodologies such as 6S or Kaizen (beneficial). Ability to work safely with chemical systems, including acids, following strict procedures. Interpersonal Skills Ability to build credibility and strong working relationships quickly. Willingness to learn and continuously develop new skills. Strong team player with a collaborative mindset. Innovative thinker who challenges existing processes and suggests improvements. Communication Oral: Excellent verbal communication skills with the ability to clearly explain technical issues, fault diagnoses, and work instructions to teams at all levels and external suppliers. Written: Strong written communication skills, capable of producing clear work instructions, reports, and technical documentation using graphs, charts, and data analysis. Scheduling and Planning Ability to plan and manage both short-term and long-term tasks effectively. Support scheduling of maintenance activities and engineering projects. Capable of working within a structured shift pattern, including alternating early and late shifts. Specific Knowledge and Experience Strong problem-solving and fault-finding capabilities. Experience diagnosing and repairing complex machinery and electronic systems. Ability to document processes, procedures, and technical findings clearly. Experience working with suppliers, subcontractors, and service engineers. Hands-on experience with mechanical setup and maintenance tasks. Other Skills Strong organisational and time management skills. Ability to work independently with minimal supervision. High attention to detail and accuracy. Performs well under pressure in demanding environments. Flexible and adaptable to changing priorities and shift patterns. Good level of computer literacy. Combined mechanical and electronic engineering experience required. TPBN1_UKTJ

C++ Software Engineer Portsdown West (PO17) Full-time Onsite Salary £50,000 - £65,000 25 days annual leave inclusive of up to 3 days Christmas shut-down Buy or sell up to 5 days annual leave Annual Wellbeing allowance Two pension schemes to choose from Private Medical Insurance + discounts for additional family members Life Assurance scheme up to 4 x salary Share Save scheme Electric/Hybrid Car leasing scheme Cycle to work scheme Retail discounts Career development support Our Electronic Warfare Operations Support (EWOS) team. A group of over 60 engineers, scientists, and former military specialists who combine their expertise to help our customers protect their people and platforms safe while achieving their full operational potential. About the Role MASS is growing its Electronic Warfare Operational Support (EWOS) team at Portsdown West, (Fareham, Hampshire). We are looking for a talented C++ Software Engineer with experience of working with simulation models, to support cutting edge research, development, and delivery projects, led by our technical customer, Dstl. This role is largely based within an in-house simulation framework (ITASE) with responsibilities to include: Developing toolsets, models, and integration activities in the ITASE framework. Incorporating or adapting additional existing Dstl data/models (e.g. signatures) into studies. Library linking, development from theory, and re-coding of existing algorithms and data. Understanding and aligning assumptions and data across components. Understanding and implementing the interactions of multiple entities in a scenario. Within the role, you will have the opportunity to influence real-world operations through the software you develop. This could be through behavioural effects within a faster-than-real-time simulation environment, or plugins to interface hardware models in a real-time environment. This role will offer the variety and autonomy to showcase your skills as a software developer. Given the importance of assurance to the end user, your knowledge of the software development lifecycle and modern technologies (e.g. HPC, distributed architectures focusing on edge computing) is essential to better enable development at pace. This work will allow you the opportunity to interact with customers, understanding how the software models are to be used, and their high-level requirements. Your creativity and autonomy will help translate these asks into deliverable software products. What we are looking for: Strong background in software development for simulation environments. Strong C++ programming skills. Experience with Visual Studio/Windows/Linux development tools. Clear communication skills to explain/adapt models. Working autonomously to solve unique problems. Supporting Skills: RF system knowledge and/or broader systems engineering experience Experience using MATLAB or Python (model integration). Familiarity with Defence/Air Platform protection systems and threat systems (e.g. SAMs, IADS, Sensors, FPVs). Knowledge of RF countermeasure and flyout simulation tools, ideally gained within a defence setting. Experience with HPC architectures. Non-negotiables: Due to the highly secure nature of the projects that you will be involved with, youmustbe: A UK National and eligible to work in the UK Eligible to obtain and maintain a UK GovernmentSC-levelsecurity clearance Who is MASS? MASS is an independent, global technology company, trusted by highly secure organisations to provide advanced, digital services that manage data and keep information safe. With our heritage in defence, we offer robust solutions to sectors where security expertise is essential. We work in partnership with customers, using skilled, technical experts. We think innovatively to provide tailored, agile and resilient solutions that secure advantage, so youre ready for digital transformation. MASS is an equal opportunities employer; we know that our people are smart, skilled and motivated and in return we provide a friendly workplace where everyone is valued and has the chance to make an impact. Join MASS and play a key role in operational analysis that strengthens defence capability and protection. TPBN1_UKTJ

Electronics Engineer Glasgow (office-first, some flexibility) Permanent | Exciting early-stage product | Life-saving technology £35,000 - £45,000 + share options, private healthcare, solid pension, more This is one of those roles that reminds you why you became an engineer. Bright Purple is working with a fast-growing technology company developing a genuinely life-saving medical product. Theyre now moving from early concept into alpha prototype and detailed design , and theyre looking for an Electronics Engineer who wants real ownership, real impact, and real technical challenge. Youll be joining a small, highly capable team of two who span hardware and firmware, at a pivotal point where your design decisions will directly shape the product that goes into manufacture and ultimately into clinical use. Youll be an experienced Electronics Engineer whos comfortable taking responsibility and making decisions, rather than just executing someone elses design. Essential experience: Degree in Electronic Engineering (or equivalent practical experience) At least 2+ years industry experience Strong proficiency with Altium Designer, CAD software, or other PCB design technologies Excellent debug skills and confidence working in the lab Understanding of EMC and safety compliance Experience with DFM / DFT Comfortable with soldering and rework Hands-on use of lab equipment (oscilloscope, signal generator, VNA) Nice to have (but not essential): Medical device development experience Exposure to ISO 14971 risk management Familiarity with IEC 60601-1 and related standards HF / RF design experience Tools such as Keysight ADS Firmware experience, particularly with ST or Nordic Semiconductor Why this role stands out Youll work on a product that genuinely saves lives Youll have real ownership , not just a small slice of the design The team is small, focused, and highly skilled no layers of bureaucracy Engineers here consistently talk about how valued and trusted they feel Its an exciting growth phase, with tough technical problems to solve Open to engineers from start-ups or larger organisations The role is based in a central Glasgow office , ideal for engineers who enjoy collaboration and hands-on development. Its an office-first environment , with some ad-hoc or occasional WFH flexibility by agreement. If youre an Electronics Engineer who wants your work to matter , and youre excited by taking a product from concept to reality, this is a rare opportunity. Bright Purple is an equal opportunities employer: we are proud to work with clients who share our values of diversity and inclusion in our industry. TPBN1_UKTJ

Principal Embedded Software Engineer Winfrith, Dorset (hybrid working, 3 days per week onsite) – Permanent vacancy We are looking for a Principal Embedded Software Engineer to work for our maritime defence client TKMS Atlas across a range of new projects, such as underwater vehicle control systems and sonar equipment. You will be hired as an experienced engineer to play a senior technical hands-on role in the team, with the potential to take on team leadership responsibility should you wish to. This role combines hands-on expertise with the potential for strategic leadership, establishing the processes, tools, and engineering culture required to deliver high-quality embedded solutions across multiple technologies. Requirements: Strong embedded C/C++ development skills. Skilled at defining engineering processes and guiding teams in their application. Ability to generate clear specifications, architectures, verification plans and test procedures. Proven ability with current microcontrollers and SoC technologies and trends. Strong documentation and technical communication skills tailored to internal and external audiences. Ability to select the most appropriate technology based on requirements, risk, cost and time. Background delivering to safety-related standards (e.g., SIL, ASIL). HNC/HND or degree in Electrical/Electronic Engineering or equivalent. Behavioural requirements : Strong sense of ownership and accountability for engineering outcomes. Professional and confident communicator with suppliers, customers and internal stakeholders. Effective problem solver with a focus on risk reduction and pragmatic decision-making. Collaborative team player who encourages knowledge-sharing rather than competition. Adaptable, able to work to a plan while managing change effectively. Motivated, supportive leader with a track record of developing others. Able to maintain a productive, positive and continuous-improvement-focused working environment. Key accountabilities may include: Technical Leadership & Capability Building Establish, grow and lead an embedded software engineering capability covering microcontrollers and SoC systems. Provide technical authority, governance and oversight across all embedded development activities. Define, develop and maintain robust engineering processes, workflows and best-practice guidelines. Build shared, reusable modules and libraries to enable quicker, lower-risk delivery on future projects. Grow the team's design and verification toolsets in line with business strategy. Project Delivery Lead the planning, delivery, monitoring and reporting of embedded software work packages. Scope, estimate and review engineering effort to support bids, proposals, and change requests. Translate customer and system requirements into clear, maintainable software specifications. Develop preliminary architecture concepts and oversee the creation of detailed designs. Define verification strategies, validation plans, and test cases, ensuring traceability to requirements. Produce high-quality documentation including design descriptions, verification reports, and release records. Ensure engineering deliverables meet internal quality standards, compliance requirements and safety standards (e.g., SIL, ASIL). Collaboration & Cross-Discipline Integration Foster strong collaboration between software, firmware, and hardware engineering teams. Enable knowledge-sharing and cross-functional development while maintaining specialist expertise. Support smooth integration between embedded software and hardware platforms. People Leadership Mentor, coach and develop embedded engineers at all levels. Participate in recruitment, selection and onboarding of new team members. Manage tasking and provide oversight for internal engineers and specialist contractors. Additional information: The successful candidate must be able to achieve full SC (Security Clearance), however you will be able to start on a BPSS with SC pending. TPBN1_UKTJ

Maintenance Engineer Salary - £50,000 + Overtime (OTE £58k) + Great benefits package Location, commutable from Daventry, Northampton A fantastic opportunity for a Maintenance Engineer has arisen to work for an internationally renowned automation solutions provider based in the Daventry area. Skills required for the role of Maintenance Engineer Maintenance and repairs on a range of automated equipment Carry out PPMs Electrical engineering Motors, invertors, sensors, fault finding etc. Mechanical Servicing and maintenance PLCs fault finding Recognised engineering qualification (electrical / electronic / mechatronics) Company benefits £50,000 + Overtime + Great benefits package Pension Scheme / Holidays / Life assurance Excellent individual career development plans Commutable from: Daventry, Northampton Other job titles Automation Engineer, Maintenance Technician, Multi-skilled maintenance engineer, Reliability Technician, Engineering Technician TPBN1_UKTJ

Electronics Hardware Engineer Surrey An established engineering organisation specialising in complex mechanical systems is seeking an experienced Electronics Hardware Engineer to join its design team. The company develops bespoke, high-performance engineered systems supplied to customers worldwide and operates across a full design-to-manufacture lifecycle. Key Responsibilities Develop new hardware architectures and support existing products for specialized industrial applications. Design high-quality, low-noise analogue circuits and digital systems utilizing FPGAs. Write and maintain embedded C and VHDL code to interface hardware with control software. Create, solder, and validate prototype hardware to ensure conformance with industry standards. Partner with software, sales, and production teams to translate customer requirements into functional engineered solutions. Essential Skills & Experience Proven proficiency in Schematic Capture and PCB Layout Experience with VHDL and embedded DSPs Strong skills in C for embedded processors Hands-on experience with electronic assembly Significant experience supporting electronics and embedded processors within a control or automated environment. If this sounds like you, please apply below! TPBN1_UKTJ

Are you an Electronic Design Engineer looking to step up into a more senior, responsible and autonomous position within a cutting-edge R&D team? We are looking for candidates having good electronics and electrical design with some basic firmware programming experience. If you want a varied and dynam

Technical Sales Engineer - North UK (remote with field-based account management) KO2's client is seeking a Technical Sales Engineer to cover the North of England up to Scotland. This is a permanent, full-time role offering a salary of £55,000-£65,000, plus an 8% pension, and a performance-related bonus. The majority of the role involves field-based customer meetings; when not on the road, you can work from home. Location and travel • Territory: North UK - from Cheshire up to and including Scotland (North England, North Wales, and Scotland), • Regular travel to customer sites and design reviews Key responsibilities • Territory management: Develop and grow a portfolio of existing customers while identifying new opportunities across the North UK region., • Technical sales support: Provide application-level guidance, technical input during design/qualification phases, and assist with component selection., • Customer engagement: Lead customer meetings, site visits, and design reviews to understand requirements and propose solutions., • Opportunity development: Identify new projects, applications, and growth areas within existing and prospective accounts., • Collaboration: Work closely with internal sales, product management, quality, and engineering teams to deliver coordinated support; liaise with suppliers as needed., • Reporting: Maintain accurate activity, opportunity, and forecast records in internal systems., • Proven experience in technical sales, applications engineering, or field sales within electronic components and high-reliability markets, • Strong technical understanding of electronic and/or electromechanical components, • Ability to communicate effectively with engineering and commercial stakeholders, • Experience managing a regional territory and working autonomously, • Commercial awareness with ability to support pricing, negotiation, and opportunity conversion, • Full, clean UK driving licence and willingness to travel regularly, • Experience selling into defence, aerospace, space, rail, or industrial sectors, • Experience working with distributors and manufacturers in a technical sales capacity, • Salary: £55,000-£65,000 per annum, • Pension: 8% employer contribution, • Bonus: Performance-related bonus (discretionary, aligned with company targets), • Benefits: Competitive package and benefits typical of a technical sales role, • Work pattern: Primarily field-based with significant customer-facing time; home-based when not visiting customers, • Be part of a well-established UK-based company with over 50 years of technical expertise, • Support technically demanding customers and long-term programmes, • Work with market-leading suppliers and high-profile customers, • Join a supportive, technically capable team with strong depth in engineering Please submit your CV and a brief note describing your relevant experience and why you are a good fit for this North UK role. JBRP1_UKTJ

An exciting opportunity has arisen for a Test Development Engineer to join this global leader specialising in high-tech electronic technologies based in Portsmouth, Hampshire. Due to continued growth, they are seeking a Test Development Engineer to join their diverse engineering teams and be responsible for analysing customer requirements to develop Analogue, Digital and Mixed Signal Test Platforms, including hardware and software design. Key skills required for the Test Development Engineer job based in Portsmouth: • Degree qualified in Electronics Engineering or related discipline, • Experience of developing Test solutions for Analogue and Mixed Signal components, • Experience with Pascal, C++, C#, Visual basic hands-on programming, • Credence D0, ASLx or COHU experience ideal To apply for this Test Development Engineer job based in Portsmouth, please send your CV to bwiles@redlinegroup,com, or for more information contact Ben Wiles on 01582 878816. JBRP1_UKTJ

Role Overview Apply now, read the job details by scrolling down Double check you have the necessary skills before sending an application. Would you like to join a truly international, talent driven company that values Safety, Ethics, Quality, Innovation and Employee Opportunity? We are currently seeking an experienced escalator call out and repair engineer to join our Transport for London team, covering our London Underground escalator portfolio. Your priority is to ensure the safety of passengers and technical stakeholders by safely maintaining a portfolio of escalator units. On a typical day you will: • Carry out breakdown and repair work on all escalators within the portfolio to achieve continual operation, • Work within London Underground network, managing the portfolio of escalator's within it, • Respond proactively and quickly to fix any breakdowns, aiming to achieve first time fix, • You will be qualified to at least NVQ Level 3 in Escalator Engineering with significant experience in service and maintenance of escalators, • You must be an experienced escalator engineer with in-depth knowledge of a variety of different brands of equipment, • Hold a valid UK drivers license, • Flexibility is important and overtime maybe required, • You have good skills in mechanical and electrical engineering, • You are a committed professional, with safety as your priority, • You are comfortable communicating to others, • You are curious, adaptable, and you know how to work alone or in a team, • You will be offered fantastic salary and benefits., • 4 on 4 off 12 hour shifts., • On top of a competitive basic salary, you will have the opportunity to supplement your earnings with Overtime, • Benefits which include pension, Life Assurance, Paid Maternity, Paternity and access to the Otis Rewards Scheme, • Employee Scholarship Scheme - Otis will support you through your studies if you wish to gain further qualifications including Bachelors and Masters Degrees, • We will train you intensively in the areas of technology, processes & soft skills and you can exchange ideas with experienced colleagues at any time.

I am excited to partner with a leading power protection company who have an immediate requirement for a Service Engineer in the South. The successful Service Engineer must be willing to travel and stay away from home overnight occasionally. Candidates will ideally live within 50 miles of the M25 and will travel to customer sites in the South (including London) carrying out service, maintenance and repairs to the companys range of equipment. Is your CV ready If so, and you are confident this is the role for you, make sure to apply asap. Candidates living in or close to the following locations are of particular interest, Watford, Bishops Stortford, Bletchley, Buckingham, Bedford, Luton, Slough, Reading, Swindon, Crawley, Camberley, Guildford, Horsham, Maidstone or close surrounding areas. Due to the nature of the role candidates will need to undertake and pass security checks. This is an exciting opportunity for engineers leaving the military with an electronic bias. In return you will join an established company and friendly engineering team where you will manage your own work schedule and time. The role comes with an attractive salary and benefits package. Service Engineer Requirements: • Hold a relevant recognised Electronic/Electrical engineering qualification to Level 3 as a minimum., • Proven experience of working with electronic equipment with a strong technical understanding of electronics and electrics., • Able to read and interpret electrical diagrams and schematics., • Flexible approach willing to travel and stay away from home on occasions., • IT literate., • Self-motivated and organised., • Ability to participate in a callout rota., • Hold full clean driving licence., • Annual salary is circa £51,750, which is made up of £45,000 basic and a guaranteed shift allowance of 15% (£6,750)., • 37 hour working week with alternate weekend working., • Overtime paid., • Callout allowance., • Company van, mobile phone, laptop, tools, PPE and uniform provided., • Company fuel card and credit card for expenses provided., • Private medical scheme and pension scheme after probationary period.

Want to work for growing team with the motivation to excel and a good team spirit? Where you will have the opportunity to apply your experience and passion for navigation sensor technologies to support the development of some of the most advanced missile systems in the world? If so, keep reading! Make sure to read the full description below, and please apply immediately if you are confident you meet all the requirements. Salary: Up to £57,000, depending on experience Dynamic (hybrid) working: 3 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: * Company bonus: Up to £2,500 (based on company performance and will vary year to year) * Pension: maximum total (employer and employee) contribution of up to 14% * Overtime: opportunity for paid overtime * Flexi Leave: Up to 15 additional days * Flexible working: We welcome applicants who are looking for flexible working arrangements * Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments * Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity: Navigation sensors are a critical technology for missile systems and therefore the team has frequent exposure to high-profile, fast-paced projects with rewarding opportunities. The team is very closely linked with the navigation sensors team in MBDA France with associated travel opportunities. You will carry out specification and assessment of navigation sensors including GNSS receivers, anti-jam units and inertial measurement units. You will monitor supplier and technology roadmaps to identify cutting edge technology for investment, support sub assembly and equipment assessment trials, and undertake research activities as part of an international team. xrnqpay This role offers you the opportunity to be part of a successful team working to develop new and innovative solutions to address complex customer requirements, develop expertise in navigation sensors, take on a key role in several multi-national research programmes, as well as the chance to challenge yourself technically. What we're looking for from you: * An experienced defence or aerospace engineer, with a degree in electronic engineering, physics, or similar * Technical knowledge in navigation systems, avionics, or RF engineering * Project management, delivery, and commercial awareness highly desirable * Modelling skills including proficiency with tools such as MATLAB and/or Simulink would be advantageous The ability to gain an understanding of the following: * A detailed understanding of all aspects of GNSS functionality, multi-constellation technology and system integration * Detailed knowledge of receivers, anti-jam and CRPA's * GNSS system chain performance & integration challenges * GNSS jamming and spoofing experience * Inertial sensor specification and characterisation

PLC Engineer Before applying for this role, please read the following information about this opportunity found below. About the Role Were seeking an experienced PLC Control Systems Engineer (510 years) to design, program, test, and commission industrial control systems across power solutions projects. Including diesel generator controls, switchgear/ATS/AMF panels, load sharing/synchronisation, and associated HMI/SCADA interfaces. The role spans the full project lifecycle (FDS/DDS, coding, FAT/SAT, on-site commissioning), working closely with electrical design, project managers, and clients to deliver robust, safe, and maintainable systems that meet industry standards. Key Responsibilities 1. Design & Development Produce and own control system deliverables: User Requirements (URS), FDS, DDS/SDS, I/O lists, Cause & Effect, alarms, and test plans. Develop PLC/HMI/SCADA applications to internal coding standards and client specifications. Configure and integrate generator controllers (Deep Sea Electronics (DSE), ComAp, Woodward), synchronising and load-sharing schemes, ATS/AMF logic, and black-start/priority management. Interface PLCs with protection relays, meters, breakers, UPS, and BMS/EMS systems. Collaborate with electrical design for wiring schematics (e.g., EPLAN/AutoCAD Electrical) and panel build liaison. 2. Testing & Commissioning Lead FAT/SAT, I/O checks, loop testing, simulation, and site commissioning. Troubleshoot PLC, HMI/SCADA, and comms networks; implement robust fixes and design improvements. Produce handover packs, as-built software, change logs, and training for end users (O&M). 3. Documentation, Quality & Compliance Maintain version control, change management, and code libraries (e.g., Git-based workflows). Ensure compliance with functional safety and electrical standards where applicable (e.g., IEC 60204-1, SIL principles/IEC 61511), PUWER, and Machinery Directive/UKCA. Contribute to RAMS for site works; uphold ISO 9001 quality procedures and good engineering practice. 4. OT Networking & Cybersecurity Design and commission industrial Ethernet networks (managed switches, VLANs, NAT, routing). Implement and document secure architectures and segmentation, harden PLC/HMI/SCADA assets, and apply password/backup policies and access controls in line with best practices. Configure and troubleshoot common industrial protocols: Modbus TCP/RTU, Profinet, Profibus, EtherNet/IP, OPC UA; (nice to have: IEC 61850, DNP3). 5. Continuous Improvement & Support Mentor junior engineers, contribute to coding standards, reusable function blocks, and templates. Provide remote and on-site support, root-cause analysis, and preventive maintenance recommendations. Suggest design enhancements for reliability, maintainability, and lifecycle cost reduction. Technical Skills PLC / HMI / SCADA Allen Bradley, Siemens TIA Portal (SCL/ladder), WinCC/Unified; Rockwell Studio 5000 (Ladder/Structured Text), FactoryTalk View. Optional: Schneider EcoStruxure, Mitsubishi GX Works, Beckhoff TwinCAT, AVEVA/Wonderware, Ignition. Must have written system code from conception / from design. Generator & Power Integration DSE/ComAp/Woodward controller integration, breaker control, load management, protection interfaces. Familiarity with UPS systems, power meters, and protection relays. Networks & Protocols Layer-2/3 concepts, VLANs, NAT, routing, industrial firewalls; Modbus, Profinet, Profibus, EtherNet/IP, OPC UA. Electrical & Safety Read/mark up schematics, panel layouts, and cable schedules. Awareness of IEC 60204-1, functional safety (SIL concepts), BS 7671 principles, PUWER; RAMS. Qualifications & Certifications (Desired) Degree/HND in Electrical, Electronic, Control/Automation, or Mechatronics Engineering (or equivalent experience). ECS/CSCS or safety passports. Full UK driving licence and ability to work on client sites. Nice to have: Functional Safety awareness (e.g., TV), CompEx/ATEX awareness where applicable. Personal Attributes Methodical, safety-first, and quality-driven, strong attention to detail. Clear communicator with clients, site teams, and non-technical stakeholders. Proactive problem solver, comfortable under time pressure during commissioning. Team player who can also work independently and mentor others. Willing to travel to sites across the UK Benefits Competitive salary £65,000£70,000 Company pension; 25 days holiday & bank holidays. Company laptop & mobile phone. Training & certification support (APM/PRINCE2/18th Edition/Siemens/Allen-Bradley). Professional membership support (IET/APM). Flexible site travel expenses. Private health care (post probation) Working Pattern 70% Office/ 30% site as needed by projects. UK travel to customer sites, factories, and FAT locations. Equal Opportunities We are an equal opportunities employer and welcome applications from all suitably qualified individuals. xrnqpay Candidates must have the right to work in the UK, have a British passport or settlement status.

Location: Carlisle Salary: Up to £19 per hour Contract : Full time, Permanent Are you an experienced Electrical Engineer looking for a hands-on role with a leading manufacturer? We are looking for a skilled engineer to join the team, wiring and assembling electrical control panels to high quality and safety standards. About the Role As an Electrical Engineer, you will: Wire electrical control panels, working from wiring schematics or assembly drawings (training available where required). Safely wire electrical control panels to customer and engineering specifications, ensuring compliance with wiring and design standards. Work from schematic wiring diagrams and General Arrangement Drawings to produce or assist in the production of electrical control panels, either independently or as part of a team. Behaviours We Value We set high standards of performance and ethical behaviour. We are looking for someone who embodies: Working with integrity Being commercially astute Partnering people and change Driven to make a difference Accountable for actions Courageous leadership Environmentally responsible Key Responsibilities Assemble electronic/electrical sub-assemblies from schematic diagrams, drawings or verbal instructions, following works orders to ISO9001 standards. Wire and solder wiring harnesses and cable assemblies. Perform limited troubleshooting and testing of assemblies. Ensure assembly and sub-assembly build times are met to maintain departmental efficiency targets of 100%. Support major project schedules, ensuring integration dates and tooling/spares completion deadlines are achieved. Carry out job tasks safely using good working practices. Complete all assembly work to department quality standards and in line with health and safety requirements. Other Responsibilities Continuous Personal Development: Commit to ongoing development to support your role and contribute to company growth. Health and Safety: Follow all company Health & Safety policies (e.g., obtaining an ECS card prior to site surveys). Diversity: Work in a fair, inclusive and professional manner, ensuring exceptional service standards are maintained. People Management: Mentor and share knowledge with less experienced team members. Quality: Support a client-focused culture with total commitment to quality. Other Duties: Tasks may vary from time to time in line with the needs of the business, without altering the overall nature of the role. Person Specification Essential Criteria Education & Qualifications Time served in an electrical discipline (e.g., Electrical Engineering). BS7671 18th edition (D). ECS card (D). Experience & Knowledge Minimum 3 years experience in a similar industrial/engineering environment. Good understanding of electrical/electronic systems. Technical competence in low voltage AC/DC panel wiring, looming and high-voltage installations. Ability to read and interpret engineering drawings and schematics. Skills Strong fault-finding and diagnostic ability. Good problem-solving skills. Able to use initiative and work both independently and within a team. Strong communication skills and willingness to share knowledge. Personal Qualities Hard-working and motivated. Reliable and punctual. Meticulous with strong attention to detail. Resilient and calm under pressure. Driven, ambitious and committed to personal development. Other Requirements Flexible and adaptable to working hours and job tasks, with a willingness to work overtime. Right to work in the UK. Driving licence. You may have experience in the following: Electrical Engineer, Panel Wirer, Control Panel Engineer, Electrical Technician, Industrial Electrician, Electrical Fitter, Panel Wiring Technician, Assembly Electrician, Electrical Installation Engineer, Maintenance Electrician, Control Systems Electrician, Electrical Wireperson, LV Electrician, Electrical Assembly Technician REF-227 179 TPBN1_UKTJ

Role Overview Would you like to join a truly international, talent driven company that values Safety, Ethics, Quality, Innovation and Employee Opportunity? We are currently seeking an experienced escalator call out and repair engineer to join our Transport for London team, covering our London Underground escalator portfolio. Your priority is to ensure the safety of passengers and technical stakeholders by safely maintaining a portfolio of escalator units. On a typical day you will: Carry out breakdown and repair work on all escalators within the portfolio to achieve continual operation Work within London Underground network, managing the portfolio of escalator's within it Respond proactively and quickly to fix any breakdowns, aiming to achieve first time fix Liaise directly with the customer while on site to build a good working relationship What you will need to be successful You will be qualified to at least NVQ Level 3 in Escalator Engineering with significant experience in service and maintenance of escalators You must be an experienced escalator engineer with in-depth knowledge of a variety of different brands of equipment Hold a valid UK drivers license Flexibility is important and overtime maybe required You have good skills in mechanical and electrical engineering You are a committed professional, with safety as your priority You are comfortable communicating to others You are curious, adaptable, and you know how to work alone or in a team You are comfortable using electronic and digital tools. What's In it For Me / Benefits You will be offered fantastic salary and benefits. 4 on 4 off 12 hour shifts. On top of a competitive basic salary, you will have the opportunity to supplement your earnings with Overtime Benefits which include pension, Life Assurance, Paid Maternity, Paternity and access to the Otis Rewards Scheme Employee Scholarship Scheme - Otis will support you through your studies if you wish to gain further qualifications including Bachelors and Masters Degrees We will train you intensively in the areas of technology, processes & soft skills and you can exchange ideas with experienced colleagues at any time. You will receive modern and high-quality work clothes, your own tools with an iPhone The health and safety of our employees is our top priority. We promote this through regular training on the subject of occupational health and safety as well as through an employee support program. Apply today to join us and build what's next! If you live in a city, chances are we will give you a lift or play a role in keeping you moving every day. Otis is the world's leading elevator and escalator manufacturing, installation, and service company. We move 2.4 billion people every day and maintain approximately 2.4 million customer units worldwide, the industry's largest Service portfolio. You may recognize our products in some of the world's most famous landmarks including the Eiffel Tower, Empire State Building, Burj Khalifa and the Petronas Twin Towers! We are 72,000 people strong, including engineers, digital technology experts, sales, and functional specialists, as well as factory and field technicians, all committed to meeting the diverse needs of our customers and passengers in more than 200 countries and territories worldwide. We are proud to be a diverse, global team with a proven legacy of innovation that continues to be the bedrock of a fast-moving, high-performance company. When you join Otis, you become part of an innovative global industry leader with a resilient business model. You'll belong to a diverse, trusted, and caring community where your contributions, and the skills and capabilities you'll gain working alongside the best and brightest, keep us connected and on the cutting edge. We provide opportunities, training, and resources, that build leadership and capabilities in Sales, Field, Engineering and Major Projects and our Employee Scholar Program is a notable point of pride, through which Otis sponsors colleagues to pursue degrees or certification programs. Today, our focus more than ever is on people. As a global, people-powered company, we put people - passengers, customers, and colleagues - at the center of everything we do. We are guided by our values that we call our Three Absolutes - prioritizing Safety, Ethics, Quality in all that we do. If you would like to learn more about environmental, social and governance (ESG) at Otis click here . TPBN1_UKTJ

Important: All applicants must be able to obtain Security Clearance and must be a sole British Nationality Working: The role offers flexible working. It would be required to be on-site 5 days a week. - We are seeking an Electronics Engineer to service Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE). The work is extremely varied, interesting and challenging. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across the business to resolve routine and non-routine tasks arising within the business. These tasks include supporting routine calibrations, commissioning, drift analysis, fault finding and repair of test equipment. The Manufacturing Electronics Engineer will be working within an experienced team of Engineers supporting complex test platforms in the manufacture and test of complex systems. You will be trained to calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave. Annual reviews assess and plan any future development opportunities and needs to widen your overall engineering knowledge. Teamwork and knowledge sharing is an essential part of the team ethos as is the understanding of workload and throughput achievements. Skill and Experience; HNC/HND with relevant experience Experience and knowledge in the calibration of test equipment and maintenance of test systems to component level. Able to utilise instructions, handbooks, drawings or specifications to provide technical advice/guidance. Able to use this information to conduct appropriate measurements and repairs down to component level. Good understanding of calibration principles and processes. Able to mentor other or more junior staff when requested by line manager. Able to deal with multiple issues, tasks and priorities concurrently. Analytical and problem solving skills. Good communication skills with the ability to tailor communication to the relevant audience. Desirable Experience; Experience in the Defence or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. A good understanding of SAP would be desirable. Experience of working on Environmental Chambers an advantage. • Even If you feel like you don't meet every qualification, we encourage you to reach out an apply. Company Benefits; Bonus : Up to £2,500 (based on performance). Pension : Up to 14% total contribution. Parental Leave : Enhanced parental, maternity, and shared parental leave. Flexi Leave : Up to 15 additional days. Facilities : On-site perks like subsidised meals and free parking. Training and Development : Excellent opportunities for career progression and skill development Company Details; The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! It's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People! 'Interesting work. Good work-life balance. Employees made to feel valued.' Software Engineer, 5 Dec 2022. *Glassdoor review. 'Promotes and believes in a good work/life balance interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities' Principal Systems Engineer, 19 Dec 2022. *Glassdoor review. True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking groups and communities across the business advocating Equity, Diversity and Inclusion. Enhanced parental leave: Offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. For full information, please get in touch: TPBN1_UKTJ

Senior Electronics Engineer (RF / GNSS) Competitive Salary + Bonus + Training + Progression + 25 Days Holiday + Security Clearance Lancaster Are you an Electronics Engineer from an RF background looking to work in the defense sector, where you will play a key part in managing cutting-edge projects from cradle to grave for the MoD? Do you want a role where you can step up into a more responsible position, where you will training and developing junior of the team whilst further enhancing your own skillset through training on FPGA programming? In this position you will be working in the Defence sector, designing cutting edge positioning and navigation technology. This will involve digital and analogue circuit design and verification working within the Hardware team. This is a senior position that will involve developing the junior members of the team and is a great chance to further develop your knowledge and progress your career in the future. Right on the doorstep of the outstandingly beautiful Lake District and Yorkshire Dales, this company was established over three decades ago and has built a strong, long-lasting foundation in a niche and profitable industry. They supply positioning, navigation and timing technology across the Defence, Aerospace, Marine, Automotive and Security industries and are known for solving complex issues within satellite communication. This role would suit an Electronics Engineer from an RF background looking for a step up into a more responsible position working on cutting-edge projects, cradle-to-grave, in a role that also allows for further technical development and ongoing career progression opportunities. The Role: Working within the electronics hardware design team Designing new products and satellite communication technology Expert training on RF and FPGA design Tailored development plan to become a technical expert in RF and FPGA Design 37 hours per week, flexible working from a Heysham based office The Person: Electronics Engineer RF Background Job Reference: BBBH 24229b Keywords: Training, Progression, Design, Senior, Electronics, Electronic, PCB, Altium, Mechatronic, Engineer, Engineering, FPGA, GNSS, Satellite, RF, Radio, Frequency, Lancaster, Heysham, Preston, Lancashire If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Electrical and Systems Engineer Electrical and Systems Engineer to work across a broad spectrum of existing and new motorsport and automotive projects. This extremely varied and challenging position requires an individual with sound knowledge and depth of experience in motorsport electronic and electrical components, ideally within the race or high- performance automotive sector. The successful candidate will have the enthusiasm, drive, and passion to work within the motorsport industry. Duties will include: Joining the early stages of developments and projects for vehicle and circuit- based systems with a view to ensuring that electronic, electrical and communications functionalities are addressed, and then planning their timely execution within budgets Being responsible for the development, planning and integration of electronic and electrical components within race and performance vehicles Managing and developing a small team of electrically biased staff Attending GB3 and GB4 race events in a pit lane support technical and troubleshooting role across car and engine electrical systems, electronic systems, and components Setting up and maintaining an inventory of all major electronic and electrical equipment on vehicles ( ECUs, dash displays, power control systems, gear shift systems, ABS, etc.), leading to appropriate development, updates, servicing, and maintenance Assembling electronic and electrical components on high- performance and race vehicles, as well as any trackside equipment with which they interface Implementing and managing routine reliability and test procedures for GB3 and GB4 vehicles Liaising with sub- contractors and suppliers from the beginning of projects to ensure that project requirements are met and supply is timely You will have / be: Degree educated in a related subject ( Electronic, Electrical, Mechanical, or Vehicle Systems Engineering) Extensive previous experience working on either racing or high- performance vehicles and familiarity with hardware and associated software manufacturers such as: Cosworth Electronics MoTeC AIM Technologies Magneti Marelli Experience interrogating, operating, and acquiring data from devices such as ECUs, power control modules, steering wheel and dash displays, gear shift systems, ABS, traction control, DRS, and other motorsport systems Familiarity with the specification and maintenance of motorsport sensors and wiring harnesses A full UK driving licence ( essential) A willingness to work within a race team working pattern ( evenings, weekends, and travel as required) Excellent attention to detail The ability to represent the organisation in a positive manner and work effectively within a team environment TPBN1_UKTJ

Senior Electrical Design Engineer Location: Burton-on-Trent, DE14 Salary: £50,000 - £60,000 (DOE) Holidays: 25 days + 8 bank holidays The Company: Our client is a global leader in the design and manufacture of specialist testing equipment used across a variety of high-demand industries including power generation, data centres, marine, and heavy lifting. With operations spanning multiple continents, the business delivers robust, high-capacity solutions for some of the most challenging environments worldwide. The UK site, where this role is based, is home to a multidisciplinary engineering team including Electrical, Mechanical, Software, and Systems Engineers. With turnover exceeding £40 million and a strong order book, the company continues to grow and invest in its engineering capabilities. The Role: As an Electrical Design Engineer , you will play a crucial role in the design and development of advanced load testing systems capable of handling electrical loads of up to 20kW to 7000kW. You will be working collaboratively across teams to deliver detailed electrical designs from concept through to final customer sign-off, ensuring compliance with relevant standards and regulations. This is a technically varied and hands-on role ideal for someone with experience in machinery, panels, or high-power electrical systems. Key Responsibilities: Translate customer specifications into electrical definitions and technical documentation. Design and produce electrical schematics, wiring diagrams, and control panel layouts using AutoCAD 2D and SolidWorks Electrical Select and specify components including contactors, switches, PLCs (e.g., Siemens LOGO), and safety circuits. Perform engineering calculations including short-circuit, voltage drop, earth withstand, and power loss assessments. Collaborate with mechanical and systems teams for full product integration. Generate and maintain Bills of Materials (BOMs) and technical drawings. Support customer-witnessed testing and ensure design meets industry regulations such as the Machinery Directive, BS, and ISO standards. Engage with vendors and suppliers to support prototyping and component sourcing. Qualifications & Experience: Proven ability to create and interpret electrical schematics and wiring diagrams. Proficient with AutoCAD 2D; experience with SolidWorks Electrical is a bonus. Background in machinery, control panels, site infrastructure, or power systems. Understanding of both low- and high-voltage electrical design. Degree in Electrical or Electronic Engineering preferred, but not essential. Minimum 3 years' experience in a relevant design environment. Strong communication skills, team-oriented, and customer-focused. Competent in Microsoft Office and understanding of BOM structures. The Benefits: Salary up to £60,000 (DOE) 25 days holiday + 8 bank holidays 7% employer pension contribution Company Sick Pay On-site parking Employee discount scheme Flexible working hours Supportive onboarding and product training How to Apply: If you're a driven and capable Electrical Design Engineer looking to work on technically exciting projects in a collaborative team, we'd love to hear from you. Please send your CV to Matt Taylor at or call for a confidential chat. ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation TPBN1_UKTJ

2 Senior Systems Engineers Inside IR35 £81.05 per hour 6 months initial term This is a senior technical role relating to the Electronic aspects of hardware design for systems engineering. A highly experienced professional engineer with a depth and breadth of knowledge in Electronics Engineering who speaks and acts authoritatively on matters pertaining to their discipline, leading and applying the principles of Electronics Engineering across the entire engineering development lifecycle from requirement definition to system integration and customer acceptance into system support and disposal. Employs a depth and breadth of expertise relating to Electronics Systems Engineering to the most complex engineering problems, challenges, and issues associated with the domain. Designs, develops, promotes and shares discipline knowledge and capability for implementation across the business and programmes, providing authoritative guidance to others relating to area of expertise. Acts as design authority for designs that the role holder / team is undertaking. Liaises with other teams and disciplines to ensure a consistent approach across the whole radar system. Typical duties include : Providing support to the SDA regarding overall Radar System design. Responsible for defining and capturing digital requirements from board level to sub-system level. Provide digital techniques support to the SDA and techniques groups (RF, software, digits, mechanical, DO) at all stagers throughout the design life cycle. Provide support to digital techniques team throughout the design process ensuring adherence to established design protocols. Provide analysis of system architectures with a view to providing guidance on make/buy/COTS decisions. Define test and integration plans from board to system level. System Design Assurance - ensuring there is enough built in functionality to support design assurance. Also contributing to the generation of the system design assurance specification. Knowledge: Experience in digital electronics including FPGA development, high speed interfaces (such as serial FPDP, JESD204 etc) , COTS hardware and PCB design. Experience in sub-system and System integration and test. Familiarity with Xilinx/AMD FPGA products and Vivado design tools Experience in radar system data analysis. Experience in the whole design process from requirements to design assurance and sign off. A solid understanding of radar operation, in particular Active Electronically Scanned Array (AESA) radars. Skills: Experience using AMD/Xilinx Vitis. Experience designing with AMD/Xilinx Versal or Zynq Ultrascale plus devices Matlab for digital processing analysis MBSE for design capture DOORS for document capture Previous experience of operating in a defence or high safety integrity environment. TPBN1_UKTJ

Senior RF Test Engineer St Neots (PE19) - Permanent - Onsite £45,000 - £58,000 25 days annual leave inclusive of up to 3 days Christmas shut-down Buy or sell up to 5 days annual leave Annual Wellbeing allowance Two pension schemes to choose from Private Medical Insurance + discounts for additional family members Life Assurance scheme up to 4 x salary Share Save scheme Electric/Hybrid Car leasing scheme Cycle to work scheme Retail discounts Career development support Come and join our expanding Electronic Warfare Operations Support Group (EWOS) which is made up of 60+electronic warfare specialists. From all manner of backgrounds, our engineers, scientists, and ex-military personnel combine their experience to help our customers achieve the true operational potential and help keep their people and platforms safe. We are building anew team led by our Principal RF Test Engineer at a state-of-the-art test andevaluationfacility at our head office in St Neots, Cambridgeshire.You willhelp plan and supportdomestic and international trialswithin the facility,while working with both present and future technology. You will become a SME in the operation of software and hardware models, applying doctrinal methods to simulation scenarios. You will play a crucial part integrating, configuring and verifying performance of a wide range of components used within a laboratory environment. This will involve the generation of test programmes using a variety of test equipment. You will assist in running laboratory trials, ensuring customers can validate the performance of assets within a synthetic test environment. Working autonomously,you will be crucial to ensure the success of key projects, all whilst being supported by our on-site MASS teams. This role works closely with our customers and your knowledge and technical insights will help shape planning, development, integration, and delivery of crucial national and international synthetic trials. The invaluable experience youll bring , to help us achieve more. Essential: Experience creating test scripts/programmes ( e.g. MATLAB, Python, or LabView ). Understanding of synthetic testing environments. Operation of test equipmentin a laboratory environment (e.g. Oscilloscopes, Signal Generators, Spectrum/Network Analysers). Experience with Direct Signal Injection (DSI) testing. Experience of analogue and digital RF circuitry. Strong background in EW systems and concepts, including radar systems. Working autonomously and tasking junior engineers. STEM Degree or extensive relevant experience / technical aptitude. Desirable: Doctrinal experience with EW systems (e.g. radar, command and control, targeting and effectors). Experience Integration/calibration of hardware and software models into a laboratory environment. Creation of laboratory procedures. Version controlling hardware and software components. Experience working on agile projects. Experience mentoring junior engineers. Wellbeing is at the core to our culture, allowingemployees to flourish and to achieve their full potential. Our people are important to us, and we take pride in our wellbeing programmes and policies that supportindividuals including, mental health first aiders and readily available support through our extensive employee assistance programme. Our Non-negotiables: Due to the highly secure nature of the projects that you will be involved with, you must be: A UK National and eligible to work in the UK Eligible to obtain and maintain a UK Government SC-level security clearance Apply today to see how working for MASS could work for you! TPBN1_UKTJ

Blatchford is an innovative, multi-award-winning, global, manufacturer of some of the world's most advanced prosthetic technology, bespoke seating solutions and orthotic devices. Our evidence-based approach and commitment to continuously challenge possibilities ensures our mobility solutions prioritise the wellbeing and long-term health of our users. Through innovation, science, technology, and maintaining a clear focus on people, we make mobility possible. We have a new and exciting opportunity for an Engineering Manager to join our dynamic R&D team, focusing on After Market and Support. The role As Engineering Manager - Aftermarket & Support , you will lead a team of NPI and Test Engineers within our Product Lifecycle Management function, delivering aftermarket and support objectives and ensuring documentation is complete, compliant and aligned with best practice. You will shape and support the sustaining roadmap with a focus on standardisation, efficiency, and continuous improvement-defining processes, establishing clear KPIs, and driving field reliability improvements. Key duties. Setting objectives and managing performance for the NPI & Support Engineer through regular reviews, coaching, and ongoing feedback. Mentoring, developing, and supporting career progression for the team member in collaboration with the Head of Department. Contributing to product roadmap planning, ensuring aftermarket and support considerations are represented early. Collaborating cross-functionally to achieve optimal design, quality, and lifecycle outcomes across active and released products. Reviewing and approve technical documentation in accordance with the QMS and engineering change processes. Driving continuous improvement activities, identifying inefficiencies and implementing or escalating improvements as required. Supporting and participating in CAPA activities, ensuring engineering inputs to root cause analysis and corrective/preventive actions are robust and compliant. Owning aftermarket support activities end to end for released medical devices. Leading engineering investigations into product failures, complaints and reliability events. Defining and prioritising support engineering tasks. Establishing clear verification and validation criteria for proposed fixes. Leading engineering input to change requests. Feeding operational and field insights into design reviews. Supporting post-market surveillance (PMS). Providing engineering support to global service and operations teams. Tracking and reporting aftermarket investigations. What are we looking for? To be considered for this Engineering Manager - Aftermarket & Support opportunity, you will have the following: Essential skills MSc in Mechanical Engineering BSc/BEng in Materials or Science related discipline Proven track record of leading engineering teams. Extensive experience within the medical device industry. Proven experience in managing aftermarket support infrastructure and evolution. Experience with MDD/MDR Experience of applying ISO 13485 and ISO 14971 Breath of understanding across other engineering domains. Familiarity with requirements and verification management tools such as JAMA Test experience in complex products requiring combined mechanical, electronic and software components. Natural leader, able to share vision and motivate people Drive for continuous improvement Team player with a positive "can do" attitude Ability to handle multiple, challenging, infrastructure areas of responsibility Excellent verbal, written and presentation communication skills What can we offer you? As Engineering Manager - Aftermarket & Support , you will receive the following: Benefits Highly completive salary Early Friday finish Flexible, hybrid working 25 days holiday (rising with service) Option to purchase additional annual leave Pension Discounted shopping and leisure activities Health cash plan Cycle to work scheme Opportunity to be part of an award-winning organisation with a culture that centres around our core values; courage, learning, integrity, collaboration, and innovation TJBLATCHFORD TPBN1_UKTJ

Company description: Water Utility Company based in Yorkshire region of England. Job description: Electrical Engineer Hello! Thanks for stopping by. Let us tell you about all the great reasons to join us here at Yorkshire Water: We are offering a competitive starting salary of £40,110. A Company van (mobile worker). Annual incentive related bonus (£1000 maximum bonus opportunity for the performance year). Attractive pension scheme (up to 12% company contribution). Continuous training and support in line with the Electrician progression plan. 25 days annual leave plus bank holidays plus an extra wellness day! Additional days in lieu of working any bank holidays. Life assurance cover of 4 times pensionable salary. A great benefits package choose from health cash plan scheme, critical illness insurance, dental insurance, life assurance flex and partner cover. Retail savings scheme. Online GP service, Employee Assistance Programme, cycle to work scheme, gym membership discounts and many more! Location : We are currently looking to recruit Electrical Engineerto work across the Yorkshire region in our within our Service Centre Asset Maintenance Department here at Yorkshire Water and be a part of helping Yorkshire Water to provide the best service to our customers. Could this be you? Work type : Permanent. Youll be working 37 hours per week plus additional overtime as required. What we do! Everyone has an idea of what a water company does. Here in Yorkshire, we make sure that over 5.4 million people living in the region and the millions of people who visit our region each year, can rely on our services, and have clean and safe drinking water on tap and that their wastewater is taken away. But for us, its so much more than this. We look after communities, protect the environment, and plan to look after Yorkshires water, today, tomorrow 24/7, 365 days a year. We provide essential water and wastewater services to every corner of the Yorkshire region, and play a key role in the regions health, wellbeing, and prosperity. New environmental legislation, unprecedented levels of investment and changing expectations from customers means that this is an exciting time to discover opportunities within the water industry. The department are a key part of how we plan to meet the changing expectations of customers and regulators. As an Electrical Engineer , you will undertake repairs and maintenance of Yorkshire Waters Electrical and Mechanical assets across wastewater treatment and pumping installations. Mobile working as part of a Service Centre Asset Maintenance Department to deliver Planned & Reactive maintenance.Driving to deliver improved asset reliability through effective decision making. Where you fit in! As an Electrical Engineer , you will be responsible for installing, maintaining, servicing, and repairing electrical equipment across Yorkshire Waters Clean and Wastewater sites. You will complete all work safely, professionally, and efficiently, ensuring high standards of electrical engineering practice. The ideal candidate will have strong practical electrical skills and hands-on experience, including the ability to assess and condemn faulty equipment on-site before returning it to the workshop for repair. You will support both the Service Centre Team and the Mitigation Department by carrying out pre-hire and post-hire assessments on electrical side our pump equipment, including control panels; completing electrical testing; inspecting pump wear components; assisting with the installation of new equipment; disconnecting electrical equipment; and providing broader electrical support to meet the operational needs of both the Mitigation Department and the overall Service Centre. You will work closely with the Service Centre Coordinator to prioritise workloads and maintain effective relationships with operational teams, colleagues, suppliers, and contract partners. A strong commitment to health and safety is essential, including hazard identification, mitigation, and reporting into the company hazard database to ensure risks are properly addressed. You will proactively identify and report follow-on work or areas for improvement. You will conduct your own risk assessments and develop appropriate method statements as required to safely carry out maintenance activities. The successful candidate will also have the ability to specify parts and equipment needed for procurement as part of the day-to-day role. You will also use a Toughbook/iPad to record work activity and update job status in line with workflow processes. Additional responsibilities include supporting the development and training of apprentices and less experienced team members, as well as identifying opportunities to improve value and service within the Service Centre and the wider Maintenance Function. What skills, experience & qualifications you will need: It is an essential requirement that you hold a recognised Electrical Craft/Technician Apprenticeship and either a City & Guilds/ ONC/ BTEC/ NVQ/ HNC/ HND or equivalent in Electrical/Electronic Engineering or Eng Tech. You will be required to visit sites across the Yorkshire Region therefore a full valid driving licence (with no more than six points) is an essential requirement of this role. It is desirable that you hold the following qualifications: IET 18th Edition Wiring Regulations (City and Guilds 2382-18). CompEx 1 4. HNC Electrical/Electronic Engineering. It is a mandatory requirement that you can demonstrate experience and knowledge in: Safe isolation to the current IET regulations. As a time served industrial electrician. Fault finding on control circuits up to the PLC. IT literate e.g., MS office. Ability to produce maintenance reports. Experience of fault finding with industrial motors and starters. Experience fault finding with industrial 3 phase systems. Experience working with rotating equipment. Experience of fault finding on LV control circuits. It is desirable that you can demonstrate experience and knowledge in: Experience of pneumatics. Work within ATEX standards. Experience of maintaining UPS systems. Fault finding experience of soft start or variable speed drives. Fault finding experience of actuated valves. Ideally, you will have previous experience gained as an industrial electrician within the water or wastewater sectors or within the broader utilities, process, or manufacturing industry sectors. You will have a proven track record of maintaining and repairing 3 phase rotating machinery and associated control systems. You will have a systematic approach to fault finding using industry best practice, where required the ability to share and mentor others. As part of this role, you will be required to work within confined spaces, any successful candidate must pass strict medical criteria including, BMI, vision, blood pressure, hearing, and Spirometry tests to ensure your full safety when working in hazardous environments. If youre an experienced Industrial Electrician and want to help us deliver exceptional service for our customers whilst protecting the environment, then apply today to find out what a career with Yorkshire Water can offer for you. If you feel this opportunity is suitable and you match the skills required, then please apply online and attach your CV outlining how your skills match this role. To assess your skills effectively, our selection process will include an online test, competency interview followed by a short practical and written assessment. Do we sound like your cup of tea? If youve got experience in operations and want to help us deliver great service for our customers whilst looking after the environment, then be sure to apply today to find out what a career with Yorkshire Water can offer you. Recruitment Process: Advert closing: 12th April If successful for the role, you will be required to undergo pre-employment checks that will include a Basic Disclosure Check, carried out through a Third-Party Company, prior to commencing employment. Depending on the role, you may also be required to go through the security vetting process for either a Counter Terrorist Check or Security Check clearance. All our roles are subject to a medical questionnaire, and further medicals when required. We are proud to serve the Yorkshire region and are committed to creating a diverse and inclusive environment that is reflective of the communities we serve. We strongly encourage candidates of all different backgrounds to apply. Kelda Group reserve the right to close this position before the published closing date, should the need occur. We therefore advise that you complete and submit your application as soon as possible. TPBN1_UKTJ

Job Role: Mobile Air Conditioning Engineer Location Mobile, across Central Scotland Hours Monday Friday, 40 hours per week Salary: £48000.00 - £50000.000 Company Overview JCW Apleona has evolved from a small mechanical installation company to a nationwide provider of mechanical and electrical installation and maintenance services. With a commitment to customer satisfaction, we deliver innovative solutions that ensure safe, comfortable, and energy-efficient environments. Summary As an AC Engineer at you will play a vital role in maintaining and installing air conditioning systems. Your expertise will contribute to our mission of providing safe and efficient environments for our clients across Scotland. Responsibilities of the Air Conditioning Engineer Install, maintain, and repair AC systems in various commercial settings. Conduct routine inspections to ensure AC systems operate efficiently. Diagnose issues with AC systems and provide effective solutions. Collaborate with team members to complete projects on time and within budget. Provide excellent customer service by communicating effectively with clients regarding their AC needs. Stay updated on industry trends and advancements in AC technology. Using an electronic system to follow your schedule and fill in technician reports. Will be carrying out many different jobs throughout the day in different locations. Cleanliness and organising of work van provided and keeping it well stocked. To ensure that all tools and other Company issued equipment are maintained in good serviceable order. To attend courses and other training events in compliance with statutory requirements. Reporting to the office daily. Confident in using an electronic system day-to-day. Requirements Proven experience as an Air Conditioning Engineer. Currently holds FGas Cat 1 Strong troubleshooting skills with attention to detail. Excellent communication skills for effective client interaction. Ability to work independently as well as part of a team. Experience with working on Mitsubishi and Daikin systems. Must have a valid UK driving license Essential Qualities: Hardworking and able to meet deadlines. Able to work in part of a team and independently. Friendly and professional with customers. Able to resolve unforeseen problems. A can do attitude. An eye for detail. Package includes: Competitive salary of circa basic £49,400.00 (this is including travel time which is paid door to door) Overtime available on top of the stated salary Additional payment of £100 per week as part of on call rota. (Currently 1 in every 7-8 days) Van and fuel card (personal use permitted) Up to 33 days annual leave (including bank holidays) Laptop and smartphone All tools supplied apart from hand tools Training and development courses Eligible to sign up to company Perkbox scheme after probation period is complete. If you're ready to take your career to the next level with a company that values integrity and innovation, apply now to join our dedicated team at JCW Apleona! TPBN1_UKTJ

Role Overview Would you like to join a truly international, talent driven company that values Safety, Ethics, Quality, Innovation and Employee Opportunity? We are currently seeking an experienced escalator call out and repair engineer to join our Transport for London team, covering our London Underground escalator portfolio. Your priority is to ensure the safety of passengers and technical stakeholders by safely maintaining a portfolio of escalator units. On a typical day you will: Carry out breakdown and repair work on all escalators within the portfolio to achieve continual operation Work within London Underground network, managing the portfolio of escalator's within it Respond proactively and quickly to fix any breakdowns, aiming to achieve first time fix Liaise directly with the customer while on site to build a good working relationship What you will need to be successful You will be qualified to at least NVQ Level 3 in Escalator Engineering with significant experience in service and maintenance of escalators You must be an experienced escalator engineer with in-depth knowledge of a variety of different brands of equipment Hold a valid UK drivers license Flexibility is important and overtime maybe required You have good skills in mechanical and electrical engineering You are a committed professional, with safety as your priority You are comfortable communicating to others You are curious, adaptable, and you know how to work alone or in a team You are comfortable using electronic and digital tools. What's In it For Me / Benefits You will be offered fantastic salary and benefits. 4 on 4 off 12 hour shifts (7PM - 7AM) On top of a competitive basic salary, you will have the opportunity to supplement your earnings with Overtime Benefits which include pension, Life Assurance, Paid Maternity, Paternity and access to the Otis Rewards Scheme Employee Scholarship Scheme - Otis will support you through your studies if you wish to gain further qualifications including Bachelors and Masters Degrees We will train you intensively in the areas of technology, processes & soft skills and you can exchange ideas with experienced colleagues at any time. You will receive modern and high-quality work clothes, your own tools with an iPhone The health and safety of our employees is our top priority. We promote this through regular training on the subject of occupational health and safety as well as through an employee support program. Apply today to join us and build what's next! If you live in a city, chances are we will give you a lift or play a role in keeping you moving every day. Otis is the world's leading elevator and escalator manufacturing, installation, and service company. We move 2.4 billion people every day and maintain approximately 2.4 million customer units worldwide, the industry's largest Service portfolio. You may recognize our products in some of the world's most famous landmarks including the Eiffel Tower, Empire State Building, Burj Khalifa and the Petronas Twin Towers! We are 72,000 people strong, including engineers, digital technology experts, sales, and functional specialists, as well as factory and field technicians, all committed to meeting the diverse needs of our customers and passengers in more than 200 countries and territories worldwide. We are proud to be a diverse, global team with a proven legacy of innovation that continues to be the bedrock of a fast-moving, high-performance company. When you join Otis, you become part of an innovative global industry leader with a resilient business model. You'll belong to a diverse, trusted, and caring community where your contributions, and the skills and capabilities you'll gain working alongside the best and brightest, keep us connected and on the cutting edge. We provide opportunities, training, and resources, that build leadership and capabilities in Sales, Field, Engineering and Major Projects and our Employee Scholar Program is a notable point of pride, through which Otis sponsors colleagues to pursue degrees or certification programs. Today, our focus more than ever is on people. As a global, people-powered company, we put people - passengers, customers, and colleagues - at the center of everything we do. We are guided by our values that we call our Three Absolutes - prioritizing Safety, Ethics, Quality in all that we do. If you would like to learn more about environmental, social and governance (ESG) at Otis click here . TPBN1_UKTJ

Calibration Manager (Electrical) £35,000 - £38,000 + Generous Profit Share + Training + Direct Progression to Management + 25 Days Holiday + 16% Pension Norwich Are you a Calibration Engineer, Technician or similar with a background calibrating Electrical test equipment, looking for a unique opportunity to be fully trained to become a Calibration Manager? Do you want the opportunity to progress your career, in a business that can offer a significant profit-share bonus for your hard work and dedication? In this role you will be running a small team within an calibration laboratory. You will be training in the managerial responsibilities of running a lab, UKAS standards and audit awareness. This role will be challenging, but immensely rewarding, an exciting opportunity for someone motivated to progress in a forward-thinking business. This company division are small, but ever expanding. With exciting plans to increase market share, they're looking to train you to become a Manager. All they need is someone dedicated and up for the challenge. This role would suit a Calibration Engineer, Technician or similar looking for expert management training, enabling career progression and a profit share bonus. The Role: Full responsibility over the day-to-day running of a small calibration team Training on how to Manage, report and audit awareness Calibrating electrical test equipment Further training on pressure, temperature and environmental instrumentation Monday - Friday, limited overtime The Person: Calibration Engineer, Technician or similar Previously worked in an accredited lab Looking to step into Management Job Reference: BBBH 23662b Calibration, Lab, Manager, ISO, 9001, Fluke, 17001, UKAS, Electrical, Testing, Measurement, Oscilloscope, Instrumentation, Electronic, Norwich, Drayton, Thorpe St Andrew If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Role: LeadSystems Engineer Location: Rochester, Kent - 4 days on site, Friday 1/2 day working from home Salary: £60,000 - £65,000 depending on experience + benefits Experienced Lead Systems Engineer needed in Rochester to work on cutting edge systems within the aerospace industry. What the role of the Lead Systems Engineer entails: Some of the main duties of the Lead Systems Engineer will include: Providing guidance to less experienced engineers, supporting team members wellbeing and career development Collaborating to uncover technical solutions and sharing recommendations Contributing to strategic project aspects and facilitating implementation of initiatives Understanding scope, size and time phasing of packages of work, how these contribute to project success Understanding the team size and skillset required, giving regular status and recommendations on resourcing requirements to the project and functional engineering manager Understanding and enabling dependencies or facilities required across the team Supporting the business by creating new estimates for bids and maintaining the schedule and budget for on-going projects What experience you need to be the successful Lead Systems Engineer: Essential: Experience in the systems engineering domain and product lifecycle Familiarity with system engineering tools such as DOORS, Siemens Polarion, Enterprise Architect, CAMEO, MATLAB and/or Simulink Experience leading a team and making decisions from either a technical or managerial aspect A degree or equivalent qualification in a relevant Scientific/Engineering subject (e.g. Systems Engineering, Electronic Engineering, Aerospace, Physics or Mathematics) Desirable: Experience leading and managing a system engineering team in relevant product markets Experience in integration, test, and/or verification of real time and/or safety related systems An understanding of information assurance, cyber security and environmental impact aspects relating to real time embedded engineering products Benefits: Overtime, 14% pension, 25 days holiday, free shares and more! Please note: Due to security restrictions we can only consider Sole UK Nationals for this position. This really is a fantastic opportunity for a Lead Systems Engineer to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website. TPBN1_UKTJ

Job Title: Field Service Engineer Salary: DOE Hours: MondayFriday (Full Time) Contract: Permanent Location: UK-wide field role with occasional international travel An established engineering solutions provider is seeking a Field Service Engineer to support installation, commissioning, maintenance, and repair activities across a diverse customer base. This role is ideal for a multi-skilled engineer who enjoys a varied position involving travel, technical problem-solving, customer interaction, and hands-on engineering work. Key Responsibilities for Field Service Engineer Carry out installation, commissioning, servicing, and repair of electro-mechanical equipment. Provide reactive and planned maintenance support across a range of customer sites around the UK and occasionally abroad Diagnose faults and perform repairs on electrical, electronic, and mechanical systems. Undertake strip-down, rebuild, and testing of equipment within the workshop. Deliver customer training on equipment operation and basic maintenance. Maintain accurate service reports, documentation, and job records. Travel across the UK and occasionally abroad as required. Experience & Skills Required for Field Service Engineer Strong background in electro-mechanical engineering, ideally within a field service or maintenance role. Confident working on electrical/electronic systems including PLC-based controls, inverters, sensors, and safety systems. Solid mechanical aptitude with experience in strip-down, rebuild, alignment, and precision mechanical work. Ability to interpret electrical diagrams, mechanical drawings, and technical documentation. Strong fault-finding skills across electrical, electronic, and mechanical disciplines. Flexible approach to working hours, travel, and varying job demands. Good communication skills and the ability to deliver excellent customer service. Competent IT skills for reporting, documentation, and communication. A valid UK driving licence and passport. NVQ Level 3 in electronics or mechanical. Interested in this Field Service Engineer vacancy? If youre interested in this Field Service Engineer role, please apply today or get in touch for more information. Thank you for your application. Due to the volume of responses, we may not be able to reply to each applicant individually. If you have not heard back within 5 working days, please consider your application unsuccessful on this occasion. TPBN1_UKTJ

Job Responsibilities * Full Life Cycle Design – Concept to Production * Mentoring/Leading other Electronic Design Engineer(s) * Product Development and Commercialisation * EMC Compliance, PCB Layout and Schematic Capture Skill Required * Someone with circa 10 years in industry and ci

Job Title: Commissioning Engineer Are you an experienced Commissioning Engineer looking for your next challenge? Do you have a positive and can-do attitude and want to be part of an energetic team? Then read on, this could be the ideal opportunity for you. We are a long-standing family run business who are an industry leader in providing Security, Fire, Reception and Data System solutions to high rise, new builds and occupied residential sites across London and the Southeast. We are looking for a highly organised and proactive Commissioning Engineer to be the bridge between installation and client use. You will be responsible for the commissioning, testing, troubleshooting, and handover of electronic security systems across a range of residential, commercial, and industrial projects. This is ideal for someone who enjoys being busy and can keep all the plates spinning, able to reprioritise with excellent organisational skills. What we Offer • 20 days plus Bank Holidays plus your birthday per annum (increasing annually to a maximum of 25 after 5 years), • Comprehensive Company Health Insurance, • Monthly Company Lunch, • ...

Job Title: Maintenance Engineer Location: Whitstable Site - Maintenance Department Salary: To include + 25% shift premium and eligible for overtime Contract: Permanent, Full-Time (37.5 hours per week) Working Hours: Rotating shift pattern: * Week 1: Monday-Friday 6:00am-2:00pm * Week 2: Monday-Thursday 2:00pm-10:30pm, Friday 2:00pm-7:30pm About the Role: We are seeking a skilled Maintenance Engineer to join our Maintenance Team at our Whitstable site. In this role, you will be a key member of the team, supporting both reactive and planned maintenance across plant and facilities, as well as contributing to continuous improvement initiatives. You will also assist with projects such as new equipment installations, site regeneration activities, and sustainability improvements. Key Responsibilities: * Diagnose, repair, and maintain electrical, mechanical, hydraulic, and pneumatic systems. * Perform Planned Preventative Maintenance (PPM), including condition-based monitoring and follow-up on remedial works. * Respond promptly to breakdowns and unplanned maintenance issues. * Support installation and commissioning of new equipment and systems. * Work with internal teams and third-party contractors to ensure smooth operations and adherence to safety standards. * Maintain and document maintenance activities accurately in the CMMS system. * Support facilities maintenance including buildings, utilities, and communications systems. * Interpret technical drawings, schematics, and operating instructions to carry out maintenance tasks effectively. * Identify gaps in current processes and propose solutions to improve efficiency and performance. Essential Qualifications & Experience: * GCSE Maths and English Grade 5 (or equivalent) * NVQ Level 3 in an Engineering discipline (or equivalent) * Minimum of 5 years' experience in a similar maintenance role * Strong technical knowledge across multiple engineering disciplines (electrical/electronic, hydraulics, pneumatics, water processes) * Skilled in fault-finding and interpreting technical diagrams * Competent in using computers for maintenance logs, purchase orders, and communication Desirable: * Completed work-based apprenticeship in a similar role * Safety qualifications such as IOSH Working Safely * Discipline-specific qualifications, e.g., 18th Edition Wiring Regs * Knowledge of CNC machinery, Injection Moulding, Automation, or Plating processes * Training in software/automation systems Please Note that unfortnately we are now UNABLE TO PROVIDE SPONSORSHIP FOR THIS ROLE JBRP1_UKTJ

Summary of Role We are looking for a highly experienced and competent Security Systems Service Engineer. You will be servicing security systems i.e. Intruder Alarms, CCTV & Access Control Systems to the relevant industry standards, using your exceptional technical industry knowledge. Ideally you will have experience of/and or knowledge of IP based networks and security systems. What you will be doing • Planned annual maintenance including reactive response., • Managing your own time to ensure jobs are prioritised correctly., • Correctly complete work reports and client recommendations., • Experience within Electronic Security industry., • Experience of IP based networks and security systems., • Full UK driving license., • Ability to lift and climb ladders., • Experience working in a customer facing environment., • Problem solving skills., • Customer focus with ability to communicate effectively with a range of customers., • Experience of/and or knowledge of IP based networks and security systems., • Competitive & negotiable salary depending on experience, • 25 days holiday plus bank holidays, • Contributory company pension scheme, • Life Assurance, • Company Van At Hall & Kay, we deliver complex fire protection and security solutions to protect what matters most to our clients. As technical experts our focus is on the lifetime value of a project. Meaning we can design, supply, install, test and maintain all types of sprinkler, gas suppression, fire detection, and integrated security systems. With 140+ year trading experience and a strong project delivery culture, we are proud to have built lasting relationships with some of the UKs most respected companies in all areas of industry and construction. What sets us apart? Our culture. What we call the Hall & Kay way.its a people thing. Put simply, we know we can achieve more when we work as a team with clients, with the communities we serve and in our own business. Our people create safety every single day, using their skills and experience to adapt to changing situations and rise to the challenges presented to them. Its our people that make us trusted to deliver. JBRP1_UKTJ

Plessey has a long history of innovation. Founded in 1956, we have evolved from one of Europe’s earliest semiconductor pioneers into the world’s most advanced microLED specialist. Over the decades, Plessey has built a first class, fully integrated platform designing, manufacturing, and engineering next-generation display technologies entirely in-house. This end-to-end capability, combined with our strong IP portfolio, uniquely positions us to lead the scaling of MicroLED’s from lab innovation to high-volume production. Our future is even brighter. We believe MicroLED’s will define the next era of technology—powering ultra-efficient AR/VR displays, driving optical processors that make AI faster and more sustainable, and enabling devices yet to be imagined. With our unique expertise and talented team, we are positioned to lead this transformation. It’s an exciting time to join us: Plessey has recently been acquired by Haylo Labs, accelerating our growth and opening new opportunities. Our Values • Lead, • Grow, • Trust Location Located at our head office and state-of-the-art fabrication facility in Plymouth. About the Role We are looking for a Senior Software Engineer to support the development of automated reliability and characterisation test systems for MicroLED devices. The role combines test software development, instrument control, and data analysis, supporting both the execution of reliability campaigns and the analysis of device performance and degradation. The engineer will work closely with hardware engineers and test engineers to develop software tools that control laboratory equipment, automate test procedures, and analyse large datasets generated during device testing. Key Responsibilities • Develop and maintain automated test software for reliability and characterisation systems., • Interface with laboratory instruments and test hardware using LabVIEW, C++, and Python., • Support the execution of device reliability campaigns and engineering experiments., • Develop tools for data collection, processing, and analysis., • Work with engineering teams to interpret results and identify device behaviour trends., • Contribute to improving the automation and robustness of internal test platforms. Skills, Knowledge and Expertise • Master’s degree in Physics, Electronic Engineering, or a related discipline., • Proficiency in LabVIEW and C++., • Working knowledge of Python for data processing and analysis., • Hands-on experience with communication protocols such as SPI and I²C., • Experience working with laboratory bench instruments such as power supply units (PSUs), oscilloscopes, pattern generators and multimeters., • Strong analytical mindset with attention to detail., • Ability to work independently with minimal supervision. Advantage • Experience with NI TestStand for automated test environments., • Background or practical experience in semiconductor device testing., • Experience analysing large datasets and developing mathematical models for device behaviour and degradation., • Familiarity with reliability testing methodologies (e.g., lifetime or stress testing).

adi Fire and Security – Fire Systems Small Works Engineer Location – We’re looking for a candidate based in the Midlands who will play a key role supporting client sites in the surrounding area. About the Role adi Fire & Security is looking for an experienced Fire Systems Small Works Engineer to join our growing Fire & Life Safety team. This is a hands-on role focused on commissioning, servicing and small works installations across a variety of environments, including heavy industrial, manufacturing and transport sites. You’ll be responsible for the installation, commissioning, servicing and maintenance of fire and life safety systems, working in line with BAFE regulations, company procedures and customer requirements. Specifically, your key responsibilities will include: • Carrying out small works installations of fire alarm and life safety systems, • Installing and commissioning PAVA and Disabled Refuge systems, • Completing planned preventative maintenance and reactive service calls, • Undertaking small-scale commissioning activities and compliance testing, • Producing completion and commissioning documentation to BAFE standards, • Working safely in line with RAMS, H&S policies and customer site rules, • Liaising professionally with customers on site and resolving issues effectively, • Supporting project delivery by meeting KPIs, timelines and quality standards, • Working alongside subcontractors and direct labour when required, • Participating in an on-call rota on agreed dates About you We would like to hear from you if you have: • Proven experience as a Fire Systems Engineer, • Strong background in fire alarm, aspirating, PAVA and Disabled Refuge systems, • Experience on medium-to-large projects within the fire and security industry, • Experience with systems such as Siemens, Gent, Notifier or EMS would be beneficial, • ECS, IPAF, CCNSG, SSTS, SMSTS, IOSH or similar H&S qualifications (beneficial), • Experience working on industrial or hazardous sites The Benefits • The adi Pit Stop – savings and discounts portal with Reward Gateway, • Healthcare cash plan, • 24/7 GP helpline including private electronic prescription service, • Enhanced Employee assistance programme, • Cycle to work scheme, • Employee referral bonus of £500 for every successful new employee, • Generous holiday allowance, • Celebration days, • Company-wide Christmas party for employees and partners, • Annual employee awards, • Long service awards, • Free workwear The company Find out more about adi - ___ Other organisations may call this role a Fire Systems Engineer, Fire Alarm Systems Engineer, Fire Safety Systems Engineer, Fire Systems Installation Engineer or Fire Systems Commissioning Engineer. adi Group is fully committed to the principle of equal opportunity in employment and seeks to ensure that the careers of all employees are determined solely on merit and opportunity and that judgement of employees are free from the effects of bias and prejudice. So, if you’re seeking your next challenge as a Fire Systems Small Works Engineer, please apply via the button shown.