Offres general engineer à Royaume-Uni - Page 2

The successful Workshop Engineer will provide mechanical fitting, service and maintenance of industrial pump systems and associated rotating equipment at the workshop near Brentford - Full product training provided. The Workshop Engineer will ideally have a general mechanical e. Workshop Engineer /

Mechanical Generator Engineer A leading UK provider of power generation and critical energy solutions is seeking an experienced Mechanical Generator Engineer to join its growing team. With over 40 years of industry expertise in standby power, diesel generators, and energy support services, this is an excellent opportunity to join a stable, reputable organisation known for its high engineering standards and commitment to continuous development. Working as part of the field engineering team, the Mechanical Generator Engineer will be responsible for service, maintenance, diagnostics, and repair of diesel generators across customer sites in the South of England. You will play a key role in ensuring equipment reliability, delivering high-quality customer service, and supporting ongoing operational performance across a wide range of critical power installations. Key Responsibilities • Perform routine service, maintenance, and repair of diesel generators up to multi-megawatt capacity, • Conduct mechanical diagnostics, fault finding, and component replacement, • Support engine rebuilds, fuel system work, cooling system repairs, and general mechanical overhauls, • Complete service reports, job documentation, and ensure compliance with company procedures, • Work independently on customer sites while maintaining a high level of professionalism and safety, • Provide occasional s...

Senior Engineer, Spacecraft platform London (Hybrid)/3 months rolling Inside IR35 The day-to-day - Integrate with the contractor teams, and coordinate their efforts to procure the satellite Platform - Ensure contract requirements are flown down to subcontractors, subsystem and system requirements - Support sub-system design reviews, test activities, data reviews, anomaly investigations and resolutions - With focus on the satellite bus support system design reviews, test activities, data reviews, anomaly investigations and resolutions - Supervise the progress of the sub-vendor and act as point contact for all technical matters. - Report issues and contractual conflicts affecting satisfactory problem resolution - Organise and record all the Platform documentation on a shared documentation system - Advise Satellite Operations on general and specific operating procedures, and always ensure safe operation of the satellites - Analyse all satellite malfunctions and anomalous behaviour. Support the liaison with the satellite supplier and other parties as necessary to complete the analysis including root cause identification. Review the Satellite Anomaly Reports - Provide and coordinate engineering team on call support according to Company policy and procedure - Support new space infrastructure procurement tasks What you'll need - Degree in Engineering with proven experience in the field of Spacecraft platform subsystems - Extensive experience in satellite design manufacturing, test, and system engineering (experience in AOCS, Propulsion or Mechanisms would be an asset) - Extensive knowledge and understanding of satellite design, assembly integration & test - Excellent writing and reporting skills. - Excellent communication skills with people at all levels of the organization - Ability to coach other member of the Satellite Engineering team TPBN1_UKTJ

Mechanical Engineer Commercial Office-Bond Street, London- £48,000.Monday to Friday, 8:00 AM 5:00 PM.Were looking for an experienced.Youll be responsible for ensuring the smooth and efficient running of all mechanical systems, including HVAC, cooling beams, and general building services.HVAC syst

Working with the maintenance team on site, He or she will be required to carry out General building maintenance in a commercial environment. My client is looking for a Shift Maintenance Engineer to be based in a commercial building In Battersea. Maintenance experience not necessary as training can b

Mobile Fabric Maintenance Engineer FMService Provider Dartford, DA - Postcodes-£32,000 + Package, Van & Fuel Card Are you a Mobile Maintenance Engineer looking to avoid travelling around Central London? Would you like a role closer to home? JoselynSearch are currently recruiting for a Mobile General Maintenance Engineer to be based across Dartford, DA Postcodes. The successful engineer will have a strong understanding of Facilities Maintenance and have proven track record in Fabric maintenance. This position would be ideal for a Maintenance Engineer currently in a similar position who is living in the area. In return the company are offering a competitive salary in the region of £32,000 + Van & Fuel Card & Package. Hours of Work & Package Info Role:Mobile Fabric Maintenance Engineer Salary: £32,000 per annum Typical Working Hours:Monday to Friday - 08:00amto 5:00pm Travel:Van + Fuel Card provided - Personal use of Vehicle Call out rota:Standby call out allowance £105 per week Overtime Holiday:25 Days Holiday + Bank Holidays Pension:Statutory pension contribution Key duties & Responsibilities: Carry out all aspects of M&E/Fabric maintenance Plumbing Carpentry Painting and Decorating Flooring Changing Locks Hanging Doors Maintain and update Log books Escort specialist sub-contractors TPBN1_UKTJ

As a Maintenance Engineer you’ll be working within your own dedicated sites as the client’s first point of call for PPM and reactive work along with other general building maintenance. TXM Recruit are currently recruiting for a mobile Maintenance Engineer to work for one of the UKs leadi

Commercial Gas Engineer £40,000 - £58,000 DOE Multiple locations This is a fantastic opportunity to work for an industry leading company going through an exciting growth period. My client are looking for fully trained commercial gas engineers to carry out Service, Breakdowns, Maintenance, Working in Plant Rooms and Boiler Rooms. The chosen Commercial gas Engineer will be responsible for looking after multiple units around their patch, building great relationships whilst performing servicing, installs and general maintenance. Job Description PPM's and reactive work Heat Pumps Pipework Installs (if capable) Plant Rooms Working in various commercial units Responding promptly to service call requests Reactive and general maintenance - On call - 1 in 6 (Will be discussed at interview stage) 8:00am - 5:00pm, Monday to FridayRequirements NVQ or equivalent IPAF is preferred Full UK Driving License Benefits: Company vehicle 33 days holiday If you are interested in this role or looking for something similar, please contact our Consultant Max Hooper directly at or call them for a confidential discussion on (phone number removed) or (url removed) If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and...

Foot Mobile Building Services Maintenance Engineer A leading Hard FM contractor currently has a key requirement for a Foot mobile Building Services Maintenance Engineer for commercial offices in London.Covering general M&E tasks, including water temp monitoring, emergency light testing, lamping, sm

Ready to find the right role for you? Salary: Up to £47840 per annum broken down as £22.50 p/h based on a 40 hour week • £0.50p/h HGV licence bonus x1.25 overtime rate x2 Sundays rate x2 Bank Holiday working plus Veolia benefits. Also the following allowance Sign-on and retention bonus of £3,000 What we can offer you; • 25 days of annual leave plus statutory bank holidays, • Access to our people's pension scheme, • Ongoing training and development opportunities, allowing you to reach your full potential, • Volunteering days for community engagement, • Refer an Engineer to us once you've joined and earn £1000, • Free physiotherapy service, • Free private GP consultation service appoints in 24hours for your household, • Discounts on everything from groceries to well known retailers, • Access to a range of resources to support your physical, mental and financial health; so you can lean on us whenever you need to, • Ongoing training and development opportunities, allowing you to reach your full potential, • Cycle to work scheme, • Support in attaining a HGV Licence, • Learn and develop your skills on everything chassis and body related from Pneumatics, to hydraulics, to electrical systems and drive lines on our mixed fleet of vehicles Hours: 40 hours per week -Monday-Friday Location:HA01ER When you see the world as we do, you see the chance to help the world take better care of its resources and help it become a better place for everyone. As a HGV Technician at Veolia no two days are the same, with multiple types of vehicles within our fleet. Your role is pivotal, ensuring that we can continue to deliver our service across the UK. Whether you're looking to overhaul the industry, or just do a good day's work, we know that everyone here at Veolia can help us work alongside our communities, look after the environment, and contribute to our inclusive culture. What will you be doing? • Repair and maintain the Veolia Fleet, 3rd party vehicles and plant in accordance with manufacturer and industry standards., • Run diagnostics on vehicles using a range of equipment., • Hydraulic, electrics, pneumatics diagnostics and repairs., • Other general work as required by the Workshop Management Team., • Work within Health & Safety regulations and be responsible for your safety and those around you., • Ensure that all necessary paperwork, and time sheets are completed accurately., • Carry out HGV MOT inspections and preparations. (IRTEC Licence preferred however we can provide training), • Complete roadside repairs when necessary (Training to be provide) What we're looking for; • Previous experience as a Mechanical Fitter/HGV Technician ideally with an NVQ Level 3 Vehicle Qualification., • Awareness and understanding of health and safety requirements, • Hold a HGV driving licence (Preferred but not essential). What's next? Apply today, so we can make a difference for generations to come. We're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. We're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. We're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive.PandoLogic. Keywords: Mechanical Fitter, Location: Watford, ENG - WD17 1QN

Ready to find the right role for you? HGV Technician Salary: up to £22.95ph , plus 50p per hour for a valid HGV Licence plus Veolia benefits and pension Hours: 40 hours per week, Monday - Friday 10:00 am - 6:30 pm Overtime available as and when required which may include weekends and Bank Holidays (Overtime Rate: Weekdays x 1.5, Saturday x 1.5, Sundays & Bank Holidays x 2.0) Location: Haringey, N17 0FJ Join us today and you will be eligible for a sign-on and retention bonus of £3,000 When you see the world as we do, you see the chance to help the world take better care of its resources and help it become a better place for everyone. As a HGV Technician at Veolia no two days are the same, with over 100 types of vehicles within our fleet. Your role is pivotal, ensuring that we can continue to deliver our service across the UK. Whether you're looking to overhaul the industry, or just do a good day's work, we know that everyone here at Veolia can help us work alongside our communities, look after the environment, and contribute to our inclusive culture. What we can offer you; • 25 days of annual leave plus statutory bank holidays (depending on location), • Access to our people's pension scheme, • Refer an Engineer to us once you've joined and earn £1000, • Free physiotherapy service, • Discounts on everything from groceries to well known retailers, • Access to a range of resources to support your physical, mental and financial health; so you can lean on us whenever you need to, • Ongoing training and development opportunities, allowing you to reach your full potential What will you be doing? • Repair and maintain the Veolia Fleet, 3rd party vehicles and plant in accordance with manufacturer and industry standards., • Run diagnostics on vehicles using a range of equipment., • Hydraulic, electrics, pneumatics diagnostics and repairs., • Other general work as required by the Workshop Management Team., • Work within Health & Safety regulations and be responsible for your safety and those around you., • Ensure that all necessary paperwork, and time sheets are completed accurately., • Carry out HGV MOT inspections and preparations., • Complete roadside repairs when necessary. What we're looking for; -Previous experience as a Mechanical Fitter/Technician. -Hold a HGV driving licence If you are a skilled or semi-skilled Technician we'd still love to hear from you. We can provide upskilling and develop you further once you've started with us. What's next? Apply today, so we can make a difference for generations to come. We're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. We're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. We're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive.PandoLogic. Keywords: Mechanical Fitter, Location: Orpington, ENG - BR6 0ER

General Maintenance Operative (Elec bias)- Continental Shift (Days & Nights) - Commercial Building - West London - Temp to perm - £40-42k My client is looking for a Shift Maintenance Engineer to be based in a commercial building in West London. The successful candidates will ideally have an Electrically qualification (C&G / NVQ 2 or 3, 18th edition). Working with the maintenance team on site, he or she will be required to carry out Electrical and General building maintenance in a commercial environment. Hours of work & Salary Continental Shift - 07:00am-19:00pm / 19:00pm -07:00am Plenty of Overtime Available Salary £40-42k Key Duties & Responsibilities Air Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning) Lighting lamp changes, ballast changes Emergency light testing Power distribution Electrical fault-finding Small works new sockets, new lights, new circuits PAT Testing Control Panel maintenance Chillers - Re-set Water Treatment (Temperature checks / Not dosing) Monitor mechanical plant Plumbing - Unblocking toilets Pumps, motors Water Treatment Requirements Experience working in a large commercial building, willing to learn Electrical maintenance experience working in a commercial environment DBS required Electrical qualifications ( NVQ 2 or 3 / C&G ) You must be able to provide copies of your trade certificates (Essential) Prior experience working in commercial building maintenance advantageous Good communication skills Excellent customer skills Must be able to get to site for 07:00am start Availability for a teams call prior to starting If you are interested please email your CV to TPBN1_UKTJ

We are looking for a skilled Plumber / Building Services Engineer to join our facilities team.This role covers general building services maintenance, including both planned preventative maintenance (PPM) and reactive work.You will support the smooth operation of our sites, ensuring safety, reliabili

Days Electrical Engineer - Kings Cross £40,000-£45,000 + Overtime | Monday-Friday | Secure, Long-Term Role A leading Facilities Management provider is seeking a skilled Electrical Engineer to join their on-site technical team at a prestigious University campus in Kings Cross . This is an excellent opportunity to work in a modern, forward-thinking academic environment with strong job stability and ongoing development. The Role Working Monday to Friday, you will deliver electrical PPMs, reactive maintenance, fault-finding, and general building services support across a large, diverse university estate. You'll ensure all electrical systems remain compliant, safe, and operational while providing high-quality support to staff, students, and campus users. Key Responsibilities Carry out PPM and reactive maintenance on electrical systems Test, inspect, and maintain lighting, small power, distribution boards, emergency lighting, and controls Troubleshoot electrical faults and carry out remedial works Support maintenance of building services including AHUs, FCUs, BMS, and general plant Ensure compliance with BS7671, health & safety rules, and safe systems of work Assist with minor mechanical and building fabric tasks when required Keep accurate records, logbooks, and documentation for all compliance work Liaise with university staff, contractors, and the FM team to maintain a safe, functional campus What We're Looking For NVQ Level 3 / C&G 2365 / 2330 in Electrical Installation 18th Edition (essential) Experience within commercial or educational building services Strong fault-finding and testing skills Good communication and customer service approach Additional skills such as emergency lighting, fire alarms, HVAC involvement, or F-Gas (advantageous but not essential) Benefits Monday-Friday, 8am-5pm Competitive salary + overtime opportunities 25 days holiday + bank holidays Training & development, including CPD & progression options Stable role within a respected university environment TPBN1_UKTJ

Junior Installation Engineer Essex Area – Travel across the UK & Possibly Europe Salary: £30,,000 (OTE £45,,000 incl Paid Overtime/travel time) + Half Day Friday + DIS + 25 Days Holiday + Stats + All expenses paid for during workday (food/hotel/travel) Fantastic opportunity for a Junior or newly qualified Engineer with a mechanical mind to join a fantastic company offering HUGE growth and devleopment potential ALONGSIDE a realistic on target earnings of up to £50,000 - if you want to travel, and to learn and love all things mechanical - GET IN TOUCH TODAY!! The company: Our client is a leading provider of mechanical engineering services in the area, supplying, designing an installing Bespoke Materials Handling Equipment and Special Purpose Machinery. Well established in the area, they have built a strong reputation for delivering quality service to their clients nationwide in the FMCG, and Logistics industries. Their team designs and assembles a variety of products, including conveyor systems, robots, structural steel work, crane systems, and more before installation & commissioning on client sites. They pride themselves in a providing a high standard of craftsmanship and innovation, working with multi-billion-pound businesses across the UK. As a business they are experiencing growth and a consistent large volume of incoming projects with a full order book many years into the future. These vacancies are urgently required to provide installation support to a VIP customer on their innumerable sites across the UK. The successful Junior Installation Engineers will work alongside Senior Installation Engineers to help manage this account and allow for a closer business to business relationship and control over the projects. The role: As a Junior Installation Engineer, you will form an integral part of the project team assisting with the installation £multi-million automated systems including conveyors, robots and sortation machinery on some of the most forward-thinking automated sites in the UK. Day to day responsibilities working alongside your Senior Installation partner; Initially attending client site to find measurements and layout the full system in chalk using laser measurements for dimensions. Bringing in the automated systems – secure, install and build unit Commissioning – practical run through and snagging These installations could consist of entire new units in brand new facilities OR an updated segment of a system during a facility upgrade which would be integrated into existing automated line. What we're looking for in a candidate: A mechanically minded and hands-on Engineer Ideally some kind of Mechanical qualification or experience within a mechanical environment - NVQ/HNC A desire to learn and progress into a Senior Installation role Someone who can work and learn alongside a Senior and pick up practical, mechanical skills Experience working with basic hand tools An interest in being client facing and the face of the business MUST HAVE an interest in travel as this role involved EXTENSIVE travel with up to 6 weeks away at any one time The Benefits: Basic salary - £30k - £35k Depending on experience Realistic OTE £45 – 50k including paid overtime/travel allowance. All expenses during workday paid for including meals/travel/hotels Early finish Friday 25 days of annual leave + bank holidays Generous DIS 5% company pension How to Apply: If you are a motivated Junior Installation Engineer hungry to learn, develop and make money and you're looking to join a growing company, we want to hear from you! Please send your CV to Kristi Hopwood at . ATA Recruitment specialises in Manufacturing, Infrastructure, Civil, Transportation and general Engineering recruitment on both a permanent and contract basis – for more opportunities like this one, visit our website. By applying you accept the terms of our Privacy Notice which can be found on our website. ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation TPBN1_UKTJ

A market-leading manufacturer is seeking a proactive Technical Sales Engineer to support continued growth across the Midlands, South of England, and Wales. The company supplies engineered solutions and technical support to a wide range of sectors, including food processing, packaging, logistics, printing and general manufacturing. This is an excellent opportunity for an individual with strong techn...

Support engine rebuilds, fuel system work, cooling system repairs, and general mechanical overhauls. A leading UK provider of power generation and critical energy solutions is seeking an experienced Mechanical Generator Engineer to join its growing team. Working as part of the field engineering team

Theyre pioneering a new model for automated strategies and and are now looking for a Senior DeFi Backend Engineer to help build the core systems powering it. Youll join a highly technical team working across general backend systems engineering along with apis, optimising the application for performa

Structural Engineer Qualifications, skills, and all relevant experience needed for this role can be found in the full description below. £45k-£55k London WC1 Reputable and well established multi disciplinary design consultancy with around 200 staff have an opening for a Project or Senior level structural engineer to join their London team. The firm work on a variety of buildings projects, ranging from small residential schemes up to large mixed use developments. Projects average from £5-15m in value in general. T... JBLK1_UKTJ

Job Reference: 683 Job Title: Maintenance Manager (Client Direct) Salary: £43,000 + 10% Bonus = £47,300 per annum Location: Mayfair, Westend Job Type: Technical/ Engineering Working Hours: Monday Friday, 8am 5pm Job Summary Our client is on the lookout for a committed and talented Maintenance Manager to join their dynamic team. Youll play a key role in in ensuring that all maintenance problems and queries are dealt with efficiently and effectively, If you're an experienced Maintenance Manager with a background in building services we encourage you to apply. As the Maintenance Manager you will be responsible for creating and operating viable and effective preventive maintenance programme for the whole site, including the building shell and surrounding grounds. Key Responsibilities Ensuring that all maintenance problems and queries are dealt with efficiently and effectively. Guaranteeing that all maintenance activities are carried out safely and securely, and in line with company policies and procedures and current health and safety legislation. Monitoring the basic fixtures and fittings of the building are always maintained to the highest standards of order and tidiness. Adhering to daily & weekly checks to ensure smooth operation of site, keeping up to date & accurate records. Directly manages the club Maintenance Engineer and organises work rotations and individual assignments. Managing the monthly budget for ordinary and extraordinary maintenance of the Club in collaboration with the General Manager and Operation Manager. Acts as point of contact for all external technicians and companies. Fulfilling Duty Shifts when required, therefore having responsibility and accountability during the shift, controlling staffing and facility issues throughout the club Requirements A technical Level 2 qualification of City & Guilds (Electrical, Mechanical, HVAC) equivalent or higher and 5 years' experience within a relevant sector. Whats on Offer £43,000 per annum 10% bonus = £4,300 per annum 30 days (including bank holidays) annual leave Access to The Peoples Pension, with our contributions at 3% X2 Complimentary gym memberships at one of the UKs most prestigious gym chains. Overtime Ready to take the next step in your career? Apply today and help us shape the future! TPBN1_UKTJ

Fitter / Mechanical Fitter / Workshop Engineer required to join a global engineering manufacturer. The successful Fitter / Mechanical Fitter / Workshop Engineerwill work on the mechanical fitting, stripping, assembling, and maintenance of industrial pump systems and other rotating equipment in the workshop near Brentford. Full training provided. The Fitter / Workshop Engineer / Mechanical Fitter will ideally have practical, hands-on, and used to getting stuck into physical mechanical work, someone who enjoys taking things apart, rebuilding equipment, and working with tools day-to-day. Package ? Circa £35,000 ? Occasional overtime ? Early finish Friday ? 25 days holiday plus bank holidays ? Pension ? Healthcare ? Additional benefits Fitter / Mechanical Fitter / Workshop Engineer Role ? Carry out mechanical fitting, stripping, and assembly of pumps and rotating machinery. ? Strip down equipment, replace worn parts, and rebuild to specification. ? Inspect and test mechanical components, spotting wear or faults. ? Support general workshop repair and maintenance tasks. ? Work closely with other engineers to keep jobs moving. ? Commutable tothe workshop in Hanwell, West London daily. Fitter / Mechanical Fitter / Workshop EngineerRequirements ? Experience in a hands-on role such as Mechanical Fitter, Workshop Engineer, Maintenance Engineer, Service Technician, Apprentice Engineer, or similar. ? Comfortable working with tools, doing physical/mechanical work, and getting your hands dirty. ? Strong practical ability assembling parts, using spanners, working on machinery. ? Interest in mechanical kit, pumps, engines, rotating equipment, or anything you can take apart and rebuild. ? Positive, willing to learn, and happy working in a busy workshop environment. ? Must be able to commute to the workshop near Hanwell, West London. TPBN1_UKTJ

Night Shift Engineer Heathrow, West London £44,000 - £48,000 We have an excellent opportunity for an experienced Maintenance Engineer (with either Electrical or Mechanical bias) to join a leading building services provider at a static commercial site in Heathrow, West London. This is a night-only position working on a 4 on / 4 off shift pattern. You'll be responsible for delivering both planned and reactive maintenance across a range of M&E systems. The role offers a fantastic opportunity to enhance your technical skills, gain hands-on experience in a commercial environment, and work for a respected and growing company. Key Responsibilities: Diagnose and repair mechanical and electrical faults across a variety of systems and equipment. Perform planned preventative maintenance (PPM) and respond to reactive maintenance requests. Carry out maintenance tasks on systems such as emergency lighting, fire alarms, AHUs, FCUs, general lighting, minor plumbing, and basic fabric repairs. Support and liaise with subcontractors and ensure work is completed in line with compliance and health & safety standards. Follow maintenance schedules and complete tasks as directed by the Engineering Supervisor or Building Services Manager. Demonstrate a flexible, multi-skilled approach to support efficient, cost-effective task completion. Requirements: Level 2 or 3 qualification in Electrical Installation or Mechanical Engineering (City & Guilds / NVQ or equivalent). Minimum of 3 years' experience in a commercial building maintenance environment. Strong fault-finding skills and a customer-focused approach. Salary and Benefits: Competitive salary of £44,000 - £48,000 4 on / 4 off night shift pattern (6:30 PM – 6:30 AM) 20 days annual leave Pension scheme Overtime opportunities Ongoing training and development Excellent internal progression prospects TPBN1_UKTJ

Building Services Engineer - Permanent Role Salary: £50,000 per annum Location: Central London (close to St. Paul's area) About the Opportunity We're pleased to be supporting the recruitment of a Building Services Engineer for a prestigious commercial site in Central London , located just a short walk from the St. Paul's area. This is a fantastic opportunity for someone who enjoys working in a modern, professional environment and wants to be part of a supportive and stable on-site engineering team. If you're looking for a role where you can take real ownership of a building, work with high-quality plant, and continue developing your technical skills, this could be an excellent next step in your career. Key Responsibilities As the Building Services Engineer on site, you will be responsible for: Delivering planned preventative maintenance (PPM) and reactive maintenance across building services plant. Working on a range of equipment including: AHUs, FCUs, pumps, fans, valves Chillers, boilers (basic checks) Lighting, emergency lighting General mechanical and electrical building services tasks Supporting the wider engineering team to maintain a safe, compliant, and well-run building. Responding to reactive issues in a timely, professional manner. Completing documentation, logbooks, and maintaining compliance records. Identifying improvements, reporting defects, and supporting continuous improvement of engineering standards. Qualifications & Experience Required NVQ / City & Guilds Level 3 in Electrical or Mechanical Engineering 18th Edition Wiring Regulations Strong understanding of commercial building services Experience in PPM & reactive maintenance within a commercial environment Ability to work independently and as part of a site-based engineering team Good communication and customer-facing skills What Makes This Role Stand Out A stable permanent role with long-term career potential A modern commercial site with good-quality plant and systems Supportive team culture with a friendly working atmosphere A role where you can genuinely make an impact day-to-day Competitive salary at £50,000 , plus benefits TPBN1_UKTJ

Multi skilled Engineer Central London Salary: £45,000 £50,000 + Overtime | Full-time, Permanent | MondayFriday (08:0017:00) At Anabas , we are not just another Facilities Management company. Were a dynamic, national team dedicated to creating exceptional workplace experiences for some of the UKs most prestigious corporate clients. If youre passionate about delivering first-class service and want to be part of an organisation that values its people, this could be your next career move. The Role Were looking for a Multi skilled engineer to join our outstanding team, supporting a high-profile client in Central London. In this role, youll take ownership of maintaining a world-class office environment, ensuring smooth operations across electrical, mechanical, plumbing, and fabric services plus a wide variety of hands-on maintenance tasks. This is a fantastic opportunity for a motivated professional who enjoys variety, thrives on responsibility, and takes pride in going above and beyond to keep things running seamlessly. What Youll Do Deliver planned preventative maintenance (PPM) and reactive repairs. Diagnose and troubleshoot issues effectively Oversee and coordinate subcontractor works, ensuring quality and compliance Liaise confidently with the client and building users to maintain strong relationships Manage PPM scheduling and planner activities Support with office moves, small works, and project management tasks Carry out access control, fabric works, and other general handyperson duties About You Electrical or mechanically qualified Minimum 3 years experience in a similar role A customer-focused, solution-driven mindset with apositive can-do attitude Strong communication and problem-solving skills What We Offer At Anabas, we believe in recognising and rewarding the hard work of our people. Youll benefit from: Competitive salary £45,000 £50,000 Overtime opportunities Employee Assistance Programme Recognition & Reward Scheme Life Insurance (1x annual salary) Cycle to Work scheme Recommend a Friend bonus scheme Regular company events Ongoing training and development opportunities Ready to take the lead? If youre looking for your next step with a forward-thinking company where no two days are the same, wed love to hear from you. Apply today and start your journey with Anabas. TPBN1_UKTJ

Job Title: Electrician Location: London Salary: £20 - £24 per hour + Overtime at £30 - £36 per hour Job Type: Permanent, Full Time Can I tempt you to join us at SheaWorks Electrical & Building Services? We're a family-run company, and those values run through everything we do - from how we treat our customers to how we look after our team. You'll never just be a number here; we're a close-knit group that takes pride in our work, supports one another, and gets the job done right. We're looking for fast-paced, industry-driven electricians who take real pride in their craftsmanship. Our projects are based in high-end properties, so attention to detail and a professional approach are a must. Why us? £20-£24 per hour, depending on experience Overtime paid at time and a half (£30-£36 per hour) Company van, fuel card, tester, tablet, and uniform provided Get your work done and get home' - we value your time and work-life balance Incentives and bonuses available for top performance Extra day's holiday for every full year you're with the company About the role: General electrical repairs Fault finding Diagnostics Testing and installations About you: Must have 2391 qualification or experience in Periodic Inspections Have served a full trade apprenticeship (Minimum NVQ Level 3) Must have testing and inspecting knowledge Have substantial post qualification work experience Have experience of domestic maintenance work Have a full manual UK driving license Have excellent diagnostic skills If you're looking to join a team where your work is valued, your effort rewarded, and your evenings respected, we'd love to hear from you. Drop us a message or apply today - let's have a chat about your next step with SheaWorks. Candidates may have experience or relevant job titles of; Electrician, Commercial Electrician, Domestic Electrician, Industrial Electrician, Mobile Electrician, Experienced Electrician, Qualified Electrician, Approved Electrician, Electrical, Electrical Engineer, Multi Skilled Electrical Technician, Maintenance Electrician, Industrial Electrician, Installation Electrician, Electrical Installation, Electrical Maintenance Engineer, Installation Engineer, Electrical Tester, Machine Electrician, Field Service Electrician, Industrial Electrician, City and Guilds Electrical Installation, Guilds Electrical Installation may be considered for this role. TPBN1_UKTJ

Key Responsibilities of the Graduate Design Engineer As a Graduate Design Engineer, you will support the engineering function with tasks including: Creating general assembly and manufacturing drawings using Autodesk Inventor and AutoCAD. Ideal Candidate for the position of Graduate Design Engineer T

Your role will involve: Produce and expedite general factory engineering improvement plans Provide support to the shopfloor as depicted by the engineering manager Project manage continuous improvement projects for the shopfloor or as specified by the Engineering Manager. Are you Process Engineer wit

As Design Engineer you will be naturally curious, and show a strong interest in aviation and aerospace engineering technology. We are looking for a Design Engineer to join our Ice protection systems team to support site sustainment design engineering enquiries and provide general department support

Fabric Engineer Duties: Carrying out planned and reactive carpentry maintenance across the site Repairing and maintaining doors, locks, skirting, flooring, and other wooden fixtures and fittings Assisting with general fabric maintenance and minor building works where required Ensuring all work is c

Gas Engineer Salary/Rate: £38000 - £45000/annum Van, Fuel Card, Tools, Pension Location: Greenwich, Greater London Company London Electrical Solutions Benefits: Company van Fuel card Power Tools provided Pension Uniform Salary negotiable depending on experience, abilities and qualifications Gas Engineer We currently have an exciting opportunity to join our Plumbing and Gas division as a Gas Engineer. This role will suit an experienced and ambitious individual who is able to carry out all aspects of plumbing and heating works to our valued customer Duties will include but not limited to the following; Installing or maintaining heating systems Landlord certificates Boiler servicing & breakdowns Boiler changes Emergency repairs General plumbing & heating Accurate reporting of work. To be suitable for this Gas Engineer you must have: Your own hand tools Extensive knowledge of boiler breakdowns/fault finding Hold a full and clean UK Driving License Have at least 3 years experience as a Gas Safe engineer Good communication skills, excellent time keeping and a professional manner Current ACS gas qualifications essential Able to work under pressure and deadlines using their own initiative This Gas Engineer role would suit someone well experienced, possibly someone who has had their own business previously and is looking for a secure role. The successful applicant will be positive, conscientious, a reliable team player with excellent interpersonal and communication skills and a good attitude. Salary negotiable depending on the candidates experience, abilities and qualifications. A company van is provided along with fuel card, power tools and uniform. TPBN1_UKTJ

Electrician - Planned Preventative Maintenance Engineer - Fire Systems - Pirin Court - Nights - Sun to Thurs 10pm to 6amLearn more about the general tasks related to this opportunity below, as well as required skills.

Fabric EngineerBelow covers everything you need to know about what this opportunity entails, as well as what is expected from applicants.- Luton- Temp to perm- FM Service Provider- Up to £23 per hour Are you looking for a new role? Do you have Fabric maintenance experience? If the answer is yes, then read on Exciting opportunity to work for a leading FM Service Provider situated in Luton.CBW is currently recruiting for a General Maintenance Engineer to be based in commercial buildings.The successful candidate will have an all-around understanding of most fabric duties and a proven track record in commercial building maintenance.Working within a team on-site, he or she will need to carry out fabric PPM and reactive maintenance.Hours of work/Salary £23( paid via umbrella only ) Monday- Friday 8am- 5pm Starting ASAP Key duties & Responsibilities Painting & Decorating Changing locks Basic Plumbing duties Bulb changes General Building maintenance Requirements A proven track record in commercial building maintenance xjlbheb Carpentry OR Painting qualification ( NVQ / C&G ) Good communication skills Health & Safety experience Basic PC literacy, (Microsoft Word, Excel, Internet, smartphone use) Ability to deliver excellent customer service If you are interested please email your CV to

Electrical Maintenance Engineer FM Service Provider - Commercial Building Stratford - Start Monday 24th November - ENHANCED DBS REQUIRED Are you immediately available and a CURRENT ENHANCED DBS CERTIFICATE? Are you fully electrically qualified? If the answer is yes, then read on.... The successful candidate will have a strong understanding of Facilities Maintenance and have proven track record in Electrical building maintenance. You will be required to carry out general PPM's within a commercial building in Stratford. Due to the type of building, it is essential that you have a current enhanced DBS certificate Hours of work Monday to Friday, 8am - 5pm (2-3 weeks work - temp) Key Duties & Responsibilities Lighting (Small installation, Fault-finding, Lamping, etc) Emergency lighting tests Control Panels Changing Ballast BMS System - Monitor (i.e. Hot & cold) Maintain and update Log books Plumbing - Unblocking toilets Pumps, motors Requirements Electrically qualified - City & Guilds Level 2&3 Must be able to provide copies of your trade certificates A proven track record in commercial building maintenance Multi-skilled Good communication skills Client Facing ENHANCED DBS CERTIFICATE If you meet all the above requirementsand are interested in the position, please send a copy of your updated CV to TPBN1_UKTJ

Theyre pioneering a new model for automated strategies and and are now looking for a Senior DeFi Backend Engineer to help build the core systems powering it. About the role: Youll join a highly technical team working across general backend systems engineering along with apis, optimising the applicat

Vehicle Technician Location: Wimbledon, London Salary: £38,000 basic per annum DOE Hours: Monday to Friday 9am to 6pm or 8am to 5pm Ref: 28528 We have a new vacancy for a Vehicle Technician for my clients site in Wimbledon, London.Submit your CV and any additional required information after you have read this description by clicking on the application button.They have a large workshop and need a Vehicle Technician to join a high-performing team.This role suits a Vehicle Technician looking for a long-term role.Company Benefits Career Development Pension Scheme Competitive Salary Vehicle Technician Role Vehicle servicing & general maintenance Vehicle Diagnostics Brakes, suspension, clutches Vehicle Technician Requirements Have at least 1 years hands on experience within the workshop You hold a NVQ level 3 Vehicle Maintenance & repair or equivalent Vehicle Technician qualification (City and Guilds) Full UK Driving License Consultant: Robert Samuels- Octane Recruitment VTSTH Octane Recruitment is a leading recruitment agency specialising in Automotive, Motor trade, Engineering, OEM, and various related industries.We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter. xjlbheb Octane Recruitment covers a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments.

Multiskilled Maintenance Engineer Oxfordshire (Haddenham, Aylesbury) Shift pattern: double day shift wk1 / 13.45-22.00 wk2 Multiskilled Maintenance Engineer is responsible for the first level escalation of breakdowns within the factory.All the relevant skills, qualifications and experience that a successful applicant will need are listed in the following description.Working as part of the shift engineering team ensuring breakdowns are fixed promptly in line with priorities.The breakdowns include mechanical, electrical and controls.The eng ineer is also responsible for the completion of preventative works orders.MAIN REPSPONSIBILITIES Health & Safety Ensure Site PPE policy and LOTO Procedures are followed.Ensure the safe working of engineering function (particulaily in areas of isolation and safe entry) Provide safety walk information to Operations Team using existing in house reporting system.To make the workplace a safe environment by ensuring: All company and legal requirements are met and maintained.Safety equipment is properly maintained, checked and recorded.Safe working practices are promoted at all times with all checks and job sign-offs completed.Quality To ensure all Quality Management Systems are adhered to and properly documented.To ensure Engineering GMP targets are achieved with standards being understood and adhered to by all team members.To understand food safety legislation, including HACCP in line with the responsibilities of the role and to ensure that the teams outputs meet these standards.To ensure all documentation is clearly completed, filed and available for internal and external auditors.To work with Production and Quality teams to improve and develop operating practices which enhance product quality and customer service.Ensure full compliance with Company Quality, Food Safety, Health & Safety and Environmental requirements.To assist with the integration of new equipment with the manufacturing, operations and project teams.Operational Multi Skilled- Electrical, Mechanical and Controls.Attends Daily Engineering meeting and inputs in terms of safety, quality, and operational KPIs where appropriate Covers Senior Shift engineers in DDS meeting in collaboration with operations and quality team Ensuring all work in recorded on CMMS ensuring correct parts booked out as appropriate Execution of planned maintenance activities with the Engineering team leader Ensure the correct spare parts are available and co-ordinate with stores personnel where required.Report (written) on shift issues, ensuring successful information transfer to the oncoming shifts Senior Engineer.Contractor Control ensure appropriate Risk assessment, LOTO Procedures, Permit procedures are complied with.Ensure that PPM schedules and works orders are completed within agreed time frames, ensuring breakdowns are closed out (where necessary), with PPM pro-forma advising on parts required.On completion of maintenance work, ensure that equipment is serviceable and runs as expected, in readiness for production.CANDIDATE PROFILE Time served Engineer- minimum NVQ 3 UK electrical or mechanical (or equivalent).Solid experience working in high-volume manufacturing environment (in food or consumer products industry preferably).Strong general electrical and/or mechanical engineering skills and knowledge.Experience in fault finding.An awareness of HACCP, PUWER, LOLER and COSHH.Must be an effective team player Must be able to work on own initiative and have ability to highlight continuous Improvement opportunities PC literate (Experience using Office 365 suite) Must be able to troubleshoot and fault-find within a production facility Good written and verbal communication skills ability to effectively communicate with both suppliers and internal customers Must be able to accurately interpret schematic diagrams Logical thinker and problem solver Must possess the energy and drive to get things done Have an organised methodology Can plan to a specified time scale.Agencies: McCormick as needed will work with external recruitment vendors through our Agency Portal.Unless previously contacted, McCormick does not accept unsolicited resumes from external recruiting agencies.McCormick & Company is an equal opportunity/affirmative action employer. xjlbheb All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, colour, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.As users of the disability confident scheme, we guarantee to interview all disabled applicants who meet the minimum criteria for the vacancy/ies.

The EDSB Group of Companies are national providers of Fire & Security, Electrical, Mechanical and Building Services.You can get further details about the nature of this opening, and what is expected from applicants, by reading the below.From Design and Specification through to Installation and Maintenance, our focus is to deliver compliance, alongside an unbeatable level of service.We work nationally across the UK and we pride ourselves on being a flexible, client focused organisation responding quickly and efficiently to our clients needs.Our aim is to work closely with our valued clients to ensure our service delivery is exceptional at all times.As a Commissioning Engineer you will commission, test and sign off Fire & Security systems and any other platforms deemed necessary for the business.This role will include but is not limited to the items below: Liaise with and take direction from the Design team and Project Manager to ascertain the Commissioning requirement/strategy for the project, in accordance with the technical specification.Conduct factory acceptance testing/off site demonstrations to client and provide operator training based on the systems implemented.Work within project time constraints, identifying and communicating without delay any potential risks to the project delivery dates.Willing to work away as required to meet the project programme.Direct and monitor installers to support the Project Management team.Document commissioning tests, utilise and modify project documentation eg.project plans, cause and effects, general wiring diagrams to a consistently high level throughout the life of a project for inclusion in project O&M manuals or handover documentation to Service Department.Updating and maintaining system software/graphics.Carrying out fault finding/diagnostics/client reporting.Conduct site surveys, advising and assisting with systems designs to confirm C&E requirements.To understand and be an integral part of the commissioning process with third party subcontractors.Take responsibility for proving/testing system/software configuration activities and cause and effect functionality.Be aware of the programme for commissioning activities against project milestones.Provide technical support to the engineering and design team as required.Ensure timesheets and all other relevant paperwork is completed on time.Undertake any relevant training as required.Ensure all relevant H&S requirements are complied with.Secondment to the Service Department as required by the business or on to any other projects as required.Ensure the health, safety and welfare of yourself and the team in accordance with Company policy.To actively support at all times, company policy and best practice in the area of fire and security, with particular emphasis on the protection of sensitive customer information.Required Skills: Experience within the Fire, Security and Electrical Systems industry.Strong track record of working in project teams of various sizes.A clear understanding of, or experience within a client-facing & construction environment.Excellent analytical and problem-solving skills.Excellent interpersonal and communication skills.Professional, organised, and highly methodical.Strong work ethic.Excellent timekeeping and time management skills.Willingness to go the extra mile.Self motivated and a team player, demonstrating professionalism, positivity and proactiveness.Working hours are 08:30 to 17:00 with a 30 minute lunch break. xjlbheb Salary will be discussed at interview stage.

Position: PSV Engineer Salary: £37,440 £49,920 per annum Overtime: Available & Optional Location: Rainham We are currently looking for a PSV Engineer / Bus Mechanic / PSV Technician / HGV Mechanic to join our clients dedicated Engineering team in their commitment in providing a high standard of service output for their customers.Below covers everything you need to know about what this opportunity entails, as well as what is expected from applicants.PSV Engineer / Bus Mechanic / PSV Technician / HGV Mechanic Required Qualifications: City & Guilds or NVQ Level 2/3 in Heavy Vehicle Maintenance and Repairs Car Driving licence PSV Engineer / Bus Mechanic / PSV Technician / HGV Mechanic Main Duties: General service, maintenance and repair of public service vehicles Cope with the day-to-day pressures that a normal vehicle workshop brings Vehicle inspections MOT preparation / Presentation Correction of running xjlbheb defects To apply for this exciting PSV Engineer / Bus Mechanic / PSV Technician / HGV Mechanic role please reply to this advert with an up-to-date copy of your CV or call Beth Hills at Kemp Recruitment on for further information.

Job Description Product Support Engineer - Rail Location: London Full time Job Description As the Product Support Engineer for Rail and you will report to the Site Team Leader or Site Supervisor At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere. By joining Rolls-Royce, you'll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture. The Product Support Engineer will conduct and support, routine maintenance and repairs on mtu rail products to the standard specified in the approved manuals in accordance with the requirements of the contract(s). To embrace digitalisation. What you will be doing: • Perform preventative, scheduled maintenance and/or corrective maintenance activities in accordance with the maintenance schedule, manuals and contract., • Actively participate in the ongoing continuous improvement activities for both maintenance and procedures. General new suggestions for improvement., • To conduct planned maintenance tasks in accordance with the operating instructions., • Attend and participate in meetings with the customer where necessary to obtain sign off for work that has been carried out on the customers equipment., • Undertake fault finding and repair when required using appropriate technical information (e.g. Technical drawings and fault finding guides)., • Completion of relevant documentation for all work carried out in order to accurately record activities that are recorded for the company and the customer., • Proactive involvement in the Company's HSQE management processes., • Maintain cleanliness of the SGB onsite facilities., • Attend local and factory training courses when necessary to ensure skills remain current., • Any other related activities reasonably required e.g. to cover work in another depot., • Accurately report parts used during service work as per internal processes to ensure our stock is effectively controlled and accounted for., • From an engineering background, • NVQ Level 2 in Engineering or Equivalent, • Outstanding safety awareness, • Proactive and with good initiative, • Strong Organising skills and a flexible attitude Type of Contract PermanentPandoLogic. Keywords: Locomotive Engineer, Location: London, ENG - SE25 5PY

Engineer is expected to be competent in general engineer works with a multi-skilled role or a biased towards mechanical, electrical trades. Primary Gas Engineer on our mobile contract delivering Planned maintenance and Reactive tasks. The engineer will be able to manage unsafe situations via warning

Managing the monthly budget for ordinary and extraordinary maintenance of the Club in collaboration with the General Manager and Operation Manager. Directly manages the club Maintenance Engineer and organises work rotations and individual assignments. Ensuring that all maintenance problems and queri

RVT Group is recruiting a Mobile Field Engineer to join our talented teams in Sheffield, Dartford and Aylesford.In this multi-disciplined role, you'll support our technical engineering installations, primarily on our Envirohub Water Treatment systems (including general temporary heating and ventilat