Trabajos maintenance en Brighouse - Page 4Crear alertas

My client based in HALIFAX is seeking HGV TECHNICIAN. Your job will be to maintain our fleet - a task that will see you working with diverse vehicle technology and sophisticated ancillary equipment. Day to day you will: • Carry out service, maintenance and repair of all types of vehicles and equipment, • Diagnose and rectify all types of faults, • Prepare and carry out MOT, • Ensure Health & Safety regulations and safe working practices are adhered to Ongoing training and development opportunities, allowing you to reach your full potential, • Demonstrate proven experience and knowledge of repairing and maintaining vehicles, • DBS check to be completed before start date (we will do this in-house), • HGV licence class 1 or class 2 an advantage but not necessary and opportunities for HGV licences possible, • Inspection training/IRTEC accreditation an advantage but can be provided., • Hydraulics and pneumatics are an advantage but training can be provided if required, • You must be able to inspect vehicles to the DVSA standards and above £22PH IF INTERESTED PLEASE CALL (email address removed) (phone number removed)

Fire & Security Service Engineer (CCTV, Access Control, Fire & Intruder Alarms) – Huddersfield – £40,000–£42,000 + Overtime We are currently recruiting for an experienced Fire & Security Service Engineer to join a well-established and growing fire and security systems company covering Huddersfield and surrounding areas. Due to continued expansion and increasing customer demand, our client is looking to strengthen their engineering team with a skilled, multi-disciplined service engineer. This is a full-time, permanent, field-based role offering a competitive basic salary, overtime, on-call earnings, a company vehicle, and ongoing training across fire and security systems. Package & Benefits * Salary £40,000 – £42,000 per annum (negotiable depending on experience) * Overtime available * On-call rota with additional earnings * Company vehicle and fuel card * Travel time paid * Pension scheme * Annual leave entitlement * Ongoing training and development * Full-time, permanent position * Field-based role covering Huddersfield and surrounding areas Role & Responsibilities * Servicing, maintenance, fault-finding, and repair of IP CCTV, Access Control, Fire Alarm, and Intruder Alarm systems * Carrying out planned and reactive maintenance across commercial sites * Working with a wide range of manufacturers’ systems * Diagnosing faults and completing effective remedial works * Ensuring all work is completed to a high standard and in line with industry regulations * Maintaining clear and professional communication with customers * Completing service reports and documentation accurately and on time * Supporting other engineers and assisting the wider team when required Skills & Experience Required * Full UK driving licence (essential) * Previous experience as a Fire & Security Service Engineer or Security Engineer * Ideally 3+ years’ experience within the fire and/or security industry (desirable, not essential) * Experience in one or more of the following: CCTV, Access Control, Fire Alarms, Intruder Alarms * Familiarity with a variety of manufacturers’ systems * Willingness to undertake additional training and upskilling * IPAF, CSCS/ECS, FIA, City & Guilds (desirable) * Positive attitude, strong work ethic, and self-motivation Apply If you are a Fire & Security Service Engineer looking for a secure, long-term role with strong earning potential and training opportunities in Huddersfield, please submit your CV to be considered. Keywords Fire & Security Service Engineer, Fire and Security Engineer, CCTV Engineer, Access Control Engineer, Fire Alarm Engineer, Intruder Alarm Engineer, Fire & Security Maintenance, IP CCTV, Fire Systems Engineer, Security Systems Engineer, Huddersfield Fire and Security Engineer, ECS Security Engineer, FIA Engineer, CSCS Fire Engineer

JOB – Field Service Engineer LOCATION –Huddersfield TERM – Permanent SALARY - £40,000 - £50,000 per annum, dependent on experience My client is a specialist supplier of products and machinery. They are looking for an experienced Field Service Engineer to join their expanding team based in the Huddersfield area on a permanent basis. The Field Service Engineer will ideally have the following attributes: 5-10 years’ relevant experience in a Servicing role Understanding electrical and mechanical systems Ideally some background working with CNC machinery Experience servicing, maintaining and testing cnc machinery Great communication and customer service skills Flexible with working hours Monday-Friday Team player who is passionate about their work Happy to travel on a field basis approx. 80% of the time Holds a full UK driving licence The Field Service Engineer role will involve: Travelling to customer sites to deliver and service machinery Electrical and Mechanical maintenance and repair Training customers on how to use their machinery Electrical servicing with some mechanical elements Around 20% of work at the company base and 80% servicing Developing strong relationships with customers Company car If you are interested in this position, please apply with an up to date CV as soon as possible, along with your availability and your salary expectation. For more information about this role please apply, or email Toby Illingworth on (url removed) who will be able to provide more details on the opportunity. Many thanks, Premier Group For more information about this role please apply, or email Toby Illingworth on (url removed) who will be able to provide more details on the opportunity. Many thanks, Premier Group

Maintenance Engineer - FMCG Location - West Yorkshire Salary - £51,500 to £56,000 Shift Pattern - PANAMA Nights We are partnering with a well-renowned client within the FMCG industry who are recruiting for a Maintenance Engineer to join their team in West Yorkshire. This is an exciting opportunity to join a fast-paced manufacturing environment, playing a key role in ensuring the continued efficiency and reliability of production operations. The Role: As a Multi-Skilled Maintenance Engineer, you will be instrumental in maintaining and improving the performance of machinery across a busy manufacturing site. This is a hands-on position requiring strong technical ability, attention to detail, and a proactive mindset. Key Responsibilities: Conduct preventative, and reactive maintenance; swiftly assessing and resolving faults to minimise disruption to operations. Support smooth production flow by setting up machinery efficiently and fine-tuning systems during product or format changes. Work cross-functionally with production and technical teams to drive engineering-based enhancements to workflows and output. Oversee equipment performance and calibration to ensure products meet quality and compliance standards. Use of a CMMS system to maintain clear documentation of engineering activities, ensuring all service records, work logs, and part usage are up to date.Requirements: Previous experience within the FMCG sector A Level 3 Qualification in Mechanical/Electrical Engineering (e.g. ONC , BTEC Level etc) Experience in a similar role, such as (maintenance technician, engineering technician, electrical maintenance engineer or shift technician) 17th Edition qualification would be desirable Solid understanding of both mechanical and electrical maintenance practices, with the ability to read technical drawings and schematics. Competent in using CMMS (Computerised Maintenance Management Systems) for logging and managing maintenance tasks. Skilled in root cause analysis and implementing long-term corrective actions to prevent recurring faults.Should this be of interest, please reach out to (url removed) or call (phone number removed) for more information

Service Engineer (Automatic Doors/ Industrial Doors) Add Resource and Labour – Huddersfield, West Yorkshire £33,000 - £35,000 Base (depending on experience) + overtime OTE £40K Monday to Friday 25 days holiday + Bank holidays + Pension + Life Assurance + Company Vehicle + Laptop The Company…. This well renowned Company is looking to recruit an Industrial Door Engineer OR Roller Shutters Engineer to assist the successful team in coping with an ever increasing demand of their products and services. In return you can expect an excellent package and to receive ongoing support as well as training and development to ensure you maintain the company’s high standards. The role…. 1. Service and maintenance of company specific Industrial Door/Roller Shutters, 2. Covering the West Midlands region To apply for this position, you must have…. 1. Strong experience gained as an Automatic Doors Engineer OR Industrial Doors Engineer ESSENTIAL, 2. Required - CSCS needed AND EN16005 trained AND ADIA or ADSA needed. Candidates suitable for this position can live anywhere in the following locations…. Barnsley Batley Bradford Burnley Castleford Chesterfield Dewsbury Doncaster Halifax Harrogate Huddersfield Keighley Leeds Morley Pontefract Rotherham Sheffield Wakefield

Belmont Recruitment are currently seeking an experienced candidate for a temporary Driver Labourer role in the Huddersfield area. This is a full-time position working 37 hours per week (08:00 – 17:15, Monday to Friday). The role involves assisting a team of trade operatives with the safe and timely transport of operatives, materials, and equipment to, from, and between sites, as well as performing general labouring duties on site. Main Duties: • Assist trade operatives in carrying out their duties, • Transport operatives, materials, and equipment safely between sites, • Clear sites before and after work, ensuring waste is removed and disposed of correctly, • Perform physically demanding work including lifting, bending, climbing ladders, and working at heights Essential Criteria: • Full UK driver’s licence, • Enhanced DBS check, • Practical labouring experience in a construction or maintenance environment, • Working knowledge of labouring duties within the building trade If your skills match the above criteria, please apply with your up-to-date CV

Cogent Staffing are recruiting for experienced Manufacturing Operatives on a temporary to permanent basis. Our client are a leading manufacturer of their industry. Full training will provided for this role. IMMEDIATE STARTS AVAILABLE & PERMANENT ROLES AFTER 12 WEEKS FOR THE RIGHT CANDIDATES YOU MUST BE PREPARED TO WORK DAYS AND NIGHTS (12 HOUR SHIFTS) WITH WEEKENDS INCLUDED (4 ON/4 OFF SHIFT PATTERN) Shift/salary: • Shifts are continental: 4 x 12 hour day shifts (7am-7pm) followed by 4 days rest period then 4 x 12 hour nights (7pm-7am), • This pattern continues, including days, nights and some weekends., • £13.96, rising after 12 weeks , permanent/after 12 full weeks of work., • All necessary training is provided however previous experience in a physical role and with working both days and nights would be a big benefit., • Temporary to permanent opportunity., • Weekly pay. The role: • Loading and unloading machines, • Machine minding / machine operating, • Quality checking products, • Completing assembly duties using hand held power tools, • Moving heavy raw materials where required, • Assisting in the moving of finished products, • General site maintenance and departmental upkeep in line with health and safety The candidate: • Can commit long term to the shift pattern, • Ability to work DAYS, NIGHTS AND WEEKENDS, • Is able to and from commute to Elland, Halifax for 7am Monday - Sunday, • Has previous experience in a similar or physical role, • Is receptive to training and willing to learn, • Can communicate well and has an eye for detail Following 12 weeks probation period successful candidates will be offered a permanent contract within the company. At Cogent Staffing, we are committed to ethical recruitment practices and fostering an inclusive workplace. We actively encourage applications from all qualified candidates, regardless of race, gender, disability, religion or belief, sexual orientation, age, or any other characteristic protected by law. We believe that diversity enriches our teams and enhances our ability to serve our clients effectively. We ensure that our recruitment processes are fair, transparent, and free from bias, promoting equal opportunities for all applicants

Machine Operative Location: Huddersfield Pay: £12.50p/h starting rate, rising to £13.56p/h once trained (reviewed in April 2026) Overtime rates: time + 20% Mon - Fri and x1.75 weekend rate Duration: 12 weeks Temporary - Permanent Hours of work: Monday - Thursday: 8:00am - 6:00pm & Friday: 8:00am - 5:00pm Please note this role requires regular mandatory overtime during busy periods. When overtime is scheduled, hours will be: Monday - Thursday: 6:00am - 6:00pm & Friday: 6:00am - 5:00pm Applicants must be flexible and willing to work these extended hours when required. Stafflex are recruiting for an experienced Machine Operative to join a well-established manufacturer of high-performance geosynthetic systems. This is an excellent opportunity for a motivated and reliable individual seeking a long-term career within a growing business. Role and Responsibilities: Operate and monitor extrusion machinery to produce products in line with production specifications. Set up extrusion machines, including loading materials, adjusting temperatures, and configuring tooling. Monitor product quality during production and make adjustments to maintain required standards. Carry out routine machine checks, cleaning, and basic maintenance to ensure equipment runs efficiently. Record production data, machine settings, and quality checks accurately. Identify and report any machine faults, material issues, or quality concerns to supervisors or maintenance teams. Follow health and safety procedures, ensuring safe operation of all machinery and equipment. Maintain a clean and organised work area in line with company housekeeping standards. Work closely with team members and supervisors to meet production targets and deadlines.Essential skills needed for the role: Previous machine operating experience Extrusion or laminating experience or knowledge desirable Counterbalance FLT ideal but not essential as training can be given Ability to work 12 hour shifts Awareness and general understanding of Health and Safety within the workplaceWhat next?! Please Apply Now with your CV or for more information call our Industrial Department on (phone number removed) (opt 1)

Multi-Skilled Engineer Birstall Full Time | Permanent Shift Pattern: Week 1: Mon-Thurs 06:00-14:00 | Fri 06:00-12:00 Week 2: Mon-Thurs 13:45-21:45 | Fri 11:45-17:45 The Role: To complete reactive and planned maintenance on all Plant, equipment and buildings to ensure the minimum impact on daily production. This ensuring maximum output to service our customers. To also ensure that every task is completed in a safe working environment and being responsible for reporting and safety hazards immediately. Key Responsibilities: Carry out frequency based Preventive Maintenance plans to site standards across all areas of the site and rectify any issues found. Diagnose breakdown causes and repair efficiently and effectively to ensure minimum downtime is seen in production of goods. Carry out equipment installations as required to current organisational and regulatory standards and be involved in or familiar with any project plans for the installation of new equipment. Proactivity suggest where something in the engineering function can be modify and Improved such as equipment, plant and processes. Calibrate instrumentation including Weighing systems, Flow control, Level indicators etc. Provide technical advice, training support and information to departmental managers, supervisors, staff and external contractors relating to electrical/mechanical systems and equipment. Carry out effective 5S processes and housekeeping of Workshop, and Plant areas affected by all maintenance activities. Be proactive in business process improvement initiatives and be aware of equipment performance trends such as efficiency, quality and waste. Respond to reactive/corrective maintenance requests in a timely manner to reduce the impact on plant/machinery downtime Key Skills: Multi-skilled, however, mechanically biased with electrical knowledge is accepted. Previous experience of working in a fast-paced manufacturing environment. Ability to work at height. Ability to work to deadlines, under pressure and unsupervised. Quality and Health & Safety awareness. The Maintenance Engineer MUST have a minimum C&G Level 3 Mechanical or Electrical qualification. Instrumentation Calibration experience (essential for electrical bias) 18th Edition IEE Wiring regulations trained and certified (essential for electrical bias) IPAF/FLT trained and certified Willingness to be flexible. Good communications skills at all levels Proactive and enthusiastic attitude Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age

Mechanical Maintenance Engineer Salary: £47,000 + Pension + Benefits Continental Shifts 4 on 4 off Days and Nights Location: Mirfield Reference: Jo7030/LN The Company A Fantastic opportunity is available to join a leading UK manufacturer, who has been established over 100 years. They are part of a secure group and specialise in a variety of consumer products. This is a fantastic opportunity to join a truly secure organisation, with the ability to develop your skills and forge your own career path. Key Skills • Apprentice Trained Engineer in Mechanical Engineering, • Experienced with the various types of PLCs, • Experienced with aspects of pneumatics and hydraulics The Roles The ideal candidate will come from an engineering background and should be able to work on their own initiative, be a time served engineer (but have some multi-skilling) and have PLC systems and PPM manufacturing experience. The successful candidate will be responsible for all aspects of day-to-day engineering and maintenance activities ensuring work is carried out to the highest standards and maximising machine efficiencies. On a day to day basis, you will be working on automated machinery along with gearboxes, AC/DC Drives, motors, pumps, ovens, shredders, dust extraction units, conveyors, belts, hydraulics, pneumatics, general mechanical work, and other manufacturing machinery. There is a huge amount of development on offer, so the successful candidate will be in line to broaden their skills considerably, with the possibility of taking on a supervisory role in the future. If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally and the company is looking to recruit this role as soon as possible. ETS Consulting Ltd – Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets ETS Consulting Limited act as an employment business and employment agency and are registered in England and Wales as ETS Consulting Limited, registered no (phone number removed). Registered office address 7 Stamford Square, Ashton Under Lyne, Lancashire, United Kingdom, OL6 6QU. If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provide ETS Consulting with proof of your identity along with proof of your eligibility to work in the United Kingdom

Job Title: Motor Vehicle Technician Location: Huddersfield Salary : £42,660 Permanent position Company Overview: We are a working with a dynamic and reputable automotive services provider, committed to delivering vehicle maintenance solutions. We are expanding our team and seeking an experienced Motor Vehicle Technician to join us. As a Motor Vehicle Technician at our company, you will be responsible for: Conducting diagnostics, repairs, and maintenance on a variety of vehicles. Ensuring the highest standards of workmanship and adhering to industry best practices. Identifying and resolving technical issues efficiently. Collaborating with the team to achieve service excellence.To excel in this role as a Motor Vehicle Technician, you should have: Previous experience as a Mobile Vehicle Technician, Van Mechanic, or Van Fitter. A qualification to NVQ level 3 or equivalent. Proficiency in conducting vehicle diagnostics and repairs. Own a set of tools.How to Apply: If you have the skills and experience to thrive as a Motor Vehicle Technician, we invite you to apply by submitting your CV to (url removed) Please include details of your relevant experience and qualifications

Tenant Liaison Officer – Halifax / Bradford Location: Halifax / Bradford ⏰ Hours: Monday to Friday, 8:00am – 4:30pm Pay: £14.00 per hour + £10 per day car allowance + 25p per mile mileage Contract: Temporary Ongoing (Permanent Opportunity Available) We are currently recruiting for an experienced Tenant Liaison Officer to join a busy planned works team covering Halifax and Bradford. This Tenant Liaison Officer role is ideal for someone with previous experience in social housing, planned maintenance, refurbishment, or construction who thrives in a customer-facing environment. As a Tenant Liaison Officer (TLO), you will act as the main point of contact between tenants, residents, site teams, and contractors during housing improvement works. The successful Tenant Liaison Officer will ensure residents are informed, supported, and fully updated throughout the lifecycle of the project. Key Responsibilities: Acting as the dedicated Tenant Liaison Officer for residents undergoing planned works Contacting tenants prior to work commencing to arrange access Explaining the scope of works, timescales, and contractor details clearly Delivering Resident Information Packs as part of your Tenant Liaison Officer duties Providing regular updates via telephone, email, letter, and home visits Handling complaints and resolving Stage 1 issues professionally Supporting vulnerable tenants with tailored plans Working closely with site managers and project teams Promoting health & safety awareness during refurbishment works Collecting tenant satisfaction feedback Completing all administration required of a Tenant Liaison Officer Tenant Liaison Officer – Requirements To be successful in this Tenant Liaison Officer position, you will have: Previous experience as a Tenant Liaison Officer, Resident Liaison Officer, or Customer Liaison Officer Experience within social housing, planned maintenance, refurbishment, or construction Strong customer service and complaint handling skills Excellent communication and interpersonal skills A proactive and organised approach Full UK driving licence and access to your own vehicle (essential for this Tenant Liaison Officer role)Why Apply for This Tenant Liaison Officer Role? ✔ Competitive hourly rate ✔ Car allowance and paid mileage ✔ Stable, ongoing contract with permanent potential ✔ Monday–Friday working hours ✔ Opportunity to build long-term experience as a Tenant Liaison Officer within social housing This Tenant Liaison Officer vacancy is being advertised by Meridian Business Support, acting as an Employment Business on behalf of our client. If you are an experienced Tenant Liaison Officer looking for your next opportunity in Halifax or Bradford, apply today. Interested? Apply now Meridian Business Support is a recruitment specialist acting on behalf of our client as an Employment Business for this vacancy

Electrical Maintenance Engineer Location: Brighouse Salary: £45,000 - £50,000 + Pension + Bens Monday - Friday days 7:30 – 16:30 annualised hours Reference: 6930/PL The Company My client is one of the UK’s leading specialist manufacturers, they are extremely well established, supplying a wide range of industries. With a worldwide presence, the group has gone from strength to strength over the last decade to become centre of excellence within the industry they specialise in. Due to further expansion within the British market, they have recently invested into new projects within the Rotherham site. Key Skills • Apprentice Trained Engineer in Electrical Engineering, • Experience of PLC Systems & Automated Machinery, • Understanding of PPM Systems The Role The ideal candidate will come from an electrical engineering background and should be able to work on their own initiative, be a time served engineer, but have ideally some multi-skilling and have PPM maintenance/manufacturing experience. The successful candidate will be responsible for all aspects of day-to-day engineering and maintenance activities ensuring work is carried out to the highest standards and maximising machine efficiencies. If you have worked on PLC controlled automated machinery it would be advantageous. You will also be able and willing to work on drives, servo controls, machine tools, hydraulics, pneumatics, process machinery, gearboxes, pumps, general mechanical work, and other manufacturing machinery. There is a huge amount of development on offer, so the successful candidate will be in line to broaden their skills considerably, with the possibility of taking on a supervisory role in the future. If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally, and the company is looking to recruit this role as soon as possible. ETS Consulting Ltd – Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets. ETS Consulting Limited act as an employment business and employment agency and are registered in England and Wales as ETS Consulting Limited, registered no (phone number removed). Registered office address 7 Stamford Square, Ashton Under Lyne, Lancashire, United Kingdom, OL6 6QU.. If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provide ETS Consulting with proof of your identity along with proof of your eligibility to work in the United Kingdom

My client has a fantastic opportunity for a Contracts Manager to join their team covering sites across the West Yorkshire region. My client is a main contractor delivering new build and refurbishment projects. The Contract Manager will play a key role in ensuring construction projects are delivered safely, efficiently, and to the highest quality standards. They will be the main point of coordination between the client, project teams, subcontractors, and internal stakeholders, ensuring that every aspect of the contract is planned, managed, and delivered. As a Contracts Manager you will be responsible for 3-4 live sites at any one time with Site Managers reporting into you. The sites are mainly in the health, food, Education and commercial sectors with projects ranging from £ 100,000 - £12m in value Key Responsibilities • Coach, motivate, and support the team to maintain a positive, accountable, and high?performing working environment. - Communicate project requirements clearly and ensure documentation, plans, and expectations are fully understood by all stakeholders. - Build strong, open, and reliable relationships with clients, end users, and partner organisations through consistent, two?way communication. - Act as key account holder for allocated clients, addressing concerns promptly and ensuring needs, expectations, and feedback are understood and acted upon. - Manage client relationships post?completion, retaining ownership of all defect management responsibilities and ensuring timely, pragmatic resolution. - Communicate effectively with all stakeholders, including clients, consultants, subcontractors, and on?site teams. - Provide clear direction to site management teams and maintain strong internal communication across project disciplines. - Produce transparent, accurate reporting to senior leadership, offering clarity on progress, risks, and overall project performance. - Set clear expectations for the supply chain in partnership with site management teams and ensure alignment with project objectives. - Manage supply chain performance in line with company procedures, recognising high performance and addressing underperformance appropriately. - Support site teams in maintaining a safe, welcoming, and respectful environment, ensuring all operatives and visitors treat the site appropriately. - Confirm designs meet the project brief, operational and maintenance requirements, and the needs of all stakeholders, including end users. - Support the preparation of high?quality bids and tenders, contributing operational insight into programmes, logistics, phasing, and pre?start documentation. - Participate in bid reviews with commercial teams to ensure submissions are accurate, competitive, and well?coordinated. Experience and qualifications • Proven experience managing multiple construction projects simultaneously, including coordination of subcontractors. - Strong leadership skills with experience leading teams. - Experience working with public and private sector clients. - Excellent communication skills with the ability to liaise confidently with senior clients and subcontractors. - Experience using programming tools and web?based document storage systems. - Working knowledge of current Health & Safety practices. - Good commercial awareness with the ability to use Excel to price small works up to £100k. - Strong IT skills, including Microsoft Outlook, Word, and Excel. - Proficient in Microsoft Project, with the ability to produce, update, and manage programmes. - Proactive approach to delivering high?quality construction work. - Strong organisational skills with the ability to prioritise workloads effectively. - Flexible approach to working hours - Qualified to HNC level or above. - Valid CITB 5?day SMSTS certificate Salary and Package • Competitive Salary, Dependent on Experience - Annual Bonus opportunity - 25 days holiday (plus Bank Holidays), rising with length of service to 30 days - Pension - Staff discounts - High Street & Retail discount schemes - Bike 2 Work Scheme - Parental Leave and Sickness Absence schemes This is a superb opportunity to join an established but growing business working with opportunity for career progression. For more information on this role please contact Paul Wilkinson on (phone number removed) or via email on (url removed)

Job title Inside Sales Executive Function Sales Location Manchester/Ripponden Reports to Sales Manager Responsible for staff N/A About our business JLA has been providing critical assets and services to a range of businesses and sectors including Care Homes, Hospitals, Schools, and Hotels for over 50 years. These assets and services are crucial in supporting customers with their Laundry, Catering, Heating, Fire Safety, Infection Control, and Air Conditioning. The company offers a unique, all-inclusive package called Total Care, this rental model allows customers to make a single monthly payment, to receive brand new equipment, and have maintenance costs taken care of. When you join the JLA family, you'll also gain access to an extensive benefits package. We care about our people and take your well-being seriously, which is why we offer a range of supportive tools for health and wellbeing, financial guidance, and legal advice. Our Employee Assistance Programme, 24/7 Wellness and Lifestyle App plus a dedicated team of Mental Health First Aiders are there to support you through life's challenges. We also offer up to 8 counseling sessions, which can be in-person or remote, providing you with the support and flexibility to suit your own personal needs. You can reach any fitness goals with our free onsite gym at head office along with a range of other gym membership discounts available. To offer financial support, we not only provide life assurance coverage, company sick pay, and a company pension scheme, we offer a range of added benefits such as free office parking, eye care vouchers, a cycle-to-work scheme, and exclusive discounts through our staff benefits hub. We really pride ourselves in offering a healthy work-life balance and believe it is important to have time away to recharge which is why we provide 25 days of annual leave plus bank holidays, flexible working options, and enhanced family leave policies. We are a company that appreciates you and invests in your success and even have a Colleague Recognition Scheme to celebrate your achievements. We're dedicated to your growth, offering support in career development and training. We value your referrals, and through our Refer a Friend scheme, you can earn up to £1,000 in bonus rewards! Role overview Our Inside Sales Executives are absolutely pivotal to our continued growth and success. As a rapidly growing business both in size and turnover, we're looking for new people to join our Inside Sales team and help us grow even further, acting as a Trusted Partner to JLAs customers. You'll be joining a highly successful sales team where you will be valued and rewarded for the contribution you make. This is transactional telesales where you will be authorising costs, booking engineer visits in and contracting customers over the phone and via email. Key tasks Making outbound sales calls using leads generated through our digital marketing team and also developing your own pipeline of customers Managing new and existing customer accounts Developing sales opportunities in partnership with your field sales colleagues Meeting/exceeding dynamic KPIs set within the contact centre Criteria Essential (attributes required for candidate to be considered) Desirable (attributes can be trained or developed) Knowledge and Skills (what you know and what you can do) Confident and effective communicator Collaborative and Positive outlook Knowledge of all Microsoft office applications Knowledge of what JLA has to offer on compliance Experience (what you have done) Experience of outbound lead generation / telesales Experience of transactional sales, closing/winning sales (preferably on the phone) Experience of working in a customer-centric position over the phone Experience in account management Have worked in a commercially driven environment Personal qualities (the way you think and act) The ability to work successfully in a fast-paced, target-driven environment Highly motivated Driven by your own results A curious mind, interested in our customers, our markets and our business Ability to speak to a varied range of people Eager to learn and build a career in a dynamic sales organisation TPBN1_UKTJ

Job Title: Business Intelligence Developer Location: Halifax, West Yorkshire (Hybrid) Salary: £45,000 per annum Experience Required: Minimum 2 years About the Role We are looking for a motivated Business Intelligence Developer to join our growing data and analytics team based in Halifax. This role is ideal for someone with at least two years of experience working with data, reporting, and BI tools who is looking to further develop their career in a collaborative and forward-thinking organisation. As a Business Intelligence Developer, you will be responsible for designing, developing, and maintaining BI solutions that support data-driven decision making across the business. You will work closely with stakeholders to transform data into meaningful insights through dashboards, reports, and data models. Key Responsibilities • Develop and maintain BI dashboards and reports using modern BI tools (e.g. Power BI, Tableau, or similar), • Design and optimise data models to support reporting and analytics requirements, • Write and optimise SQL queries to extract and transform data from multiple sources, • Collaborate with business stakeholders to understand reporting requirements, • Support the development and maintenance of data pipelines and ETL processes, • Ensure data quality, consistency, and performance across reporting systems, • Provide insights and recommendations based on data analysis Required Skills & Experience • Minimum 2 years’ experience in a Business Intelligence, Data Analyst, or similar role, • Strong SQL skills and experience working with relational databases, • Experience with BI tools such as Power BI, Tableau, or similar platforms, • Understanding of data modelling and data warehousing concepts, • Ability to translate business requirements into technical solutions, • Strong analytical and problem-solving skills, • Excellent communication and stakeholder engagement skills Desirable Skills • Experience with ETL tools or data integration platforms, • Knowledge of Python or other scripting languages for data processing, • Experience working with cloud data platforms (e.g. Azure, AWS, or GCP) What We Offer • Competitive salary of £45,000, • Hybrid working arrangement, • Opportunities for professional development and training, • Supportive and collaborative team environment, • Pension and standard company benefits Location This role is based in Halifax, West Yorkshire, with flexible hybrid working options available

Job Title: Contract Multi-Skilled Engineer Location: Halifax area Pay Range: £36-£40 per hour, Inside Scope, NOT LTD COMPANY Contract Type: Contract (Seasonal peak) 3-month minimum ongoing contract Hours: 12 Hour rotating pattern every other weekend off Client: FMCG manufacturing Our client is a renowned and admired FMCG business, enjoying UK dominance and market-leading status in their category sector. An opportunity has arisen for a temporary contract Multi-Skilled Engineer, electrical or mechanical bias, to hit the ground running on shift to help with site maintenance, with a minimum contract of three months, which could be ongoing. Key Responsibilities – Contract Multi-Skilled Engineer Responsible for a combination of planned and reactive maintenance and technical challenges to ensure maximum line efficiency Perform fault-finding and diagnosis on a range of PLC-controlled warehouse equipment Attend to breakdowns onsite, ensuring a rapid response to plant equipment and machinery breakdowns Carry out planned preventative maintenance on a range of Manufacturing and Automation machinery, including pneumatics, hydraulics, conveyors, packing lines and robots Deliver on plant uptime and maintenance KPI’s through planned, preventative and predictive maintenance. Ensure the efficient running of a continuous process, making, moving and packing high quality products, packaged and prepared for delivery Continually improving the performance of equipment and systems to support the development of the site Agree on preventative maintenance plans Qualifications & Requirements – Contract Multi-Skilled Engineer Apprentice trained or NVQ level 3 in an engineering discipline mechanical or electrical, in maintenance engineering Production line experience on high-speed packaging equipment in FMCG PLC, Network knowledge preferred A proactive approach to fault finding, a commitment to continuous improvement and personal development Computer literate Team Player What we can offer – Contract Multi-Skilled Engineer Work at an award-winning site Flexible shift pattern Automated facility Opportunity for overtime and additional hours Subsidised Canteen For more information on this role, please contact Mike Butler on (phone number removed) or send a copy of your CV to (url removed) Candidates who are currently a multi-skilled engineer, mechanical engineer, contract engineer, packaging engineer, electrical biased engineer, electrical maintenance engineer, shift engineer or maintenance engineer may be suitable for this position. Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors

Job Title: Technical Sales & Service Support- Fluid Management Location: Brighouse, West Yorkshire Salary: £27,000 - £30,000 per annum Job Type: Full Time, Permanent Working Hours: Monday to Friday About Millers Oils: Millers Oils is a leading provider of high-performance lubricants, specialising in the automotive, industrial, and commercial sectors. With over 135 years of expertise, we take pride in delivering advanced products and services that drive performance, reliability, and sustainability. Our commitment to quality and innovation has made us a trusted name within the industry. Role Overview: We're looking for a Technical Sales & Service Support- Fluid Management to join our UK Industrial team. This is an excellent entry-level opportunity for someone keen to learn, develop technical skills, and progress into a more senior technical sales, or customer-focused role over time. You'll work onsite at customer locations, supporting experienced technicians and helping deliver a high-quality fluid management service. You'll gain exposure not only to technical operations, but also to customer relationship management and business development activities. This role is ideal for someone who enjoys working practically, interacting with customers, and wants to progress into Account Management/ Business Development. Key Responsibilities: Onsite & Technical Support: - Assist with onsite fluid management services such as oil handling, topping up, sampling, and housekeeping - Support senior technicians during routine service visits and maintenance work - Prepare equipment, materials, and documentation for site activities - Carry out basic inspections and checks under supervision - Maintain clean, safe, and organised working areas at customer sites Customer Support: - Act as a professional and approachable representative of the company - Build positive working relationships with customer personnel - Communicate clearly with customers and escalate issues when required - Support the Fluid Management Co-ordinator when needed Business Awareness & Development: - Learn how onsite service supports customer retention - Identify and report opportunities for additional products or services - Convert opportunities into sales - Feed back customer needs, issues, or growth opportunities - Update CRM systems to ensure potential business is tracked effectively Health, Safety & Compliance: - Follow all company and customer health, safety, and environmental procedures - Work safely at all times and report hazards, near misses, or incidents promptly About You: Essential: - A strong willingness to learn and develop in a technical, customer-facing role - Good communication skills and a positive, professional attitude - Comfortable working onsite in industrial environments - A team player who is reliable, organised, and hands-on - Full UK driving licence Desirable: - Previous experience in a sales or technical sales role within industrial, manufacturing, engineering environments - Customer-facing experience - Basic mechanical or technical awareness Progression on the Role: Please note that the final goal of this position is to be a sales / account management role but to ensure that candidates have an understanding of the technical side, you will start as a Technical Sales & Service Support- Fluid Management. * You will start as Technical Sales & Service Support within our Fluid Management team. * For the first 3-6 months, you will be spending time with our engineers and helping on jobs along with some sales shadowing with the team. * After 6-12 months, once developed within the role, you will progress into Technical Sales of our Fluid Management (full training can be provided). Depending on skills and experience these time frames could be subject to change. Candidates who already posses the required skill set will be fast tracked to the sales aspects of the role. What We Offer: - A clear development and progression pathway - Hands-on training and exposure to experienced technicians - Opportunities to move into commercial, leadership, or customer-focused roles - A supportive team environment within a reputable brand known for high-quality products and services Ready to make an impact? Millers Oils is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Please click the APPLY button to submit your CV and Cover Letter. Candidates With the Relevant Experience or Job Titles Of; Industrial Maintenance Technician, Manufacturing Technician, Technical Engineer, Industrial Support Engineer, Manufacturing Support Technician, Maintenance Support Technician, Fluid Management Technician, Industrial Sales Engineer, Fluid Management Engineer may also be considered for this role

Role: Transport Controller - 4 on 4 off Rotating Shifts (Days / Nights) Location: Huddersfield Salary: £32,000 - £35,000 + £3,500 Shift Allowance The Role We are recruiting a Transport / Operations Controller to support a critical, time-sensitive delivery operation across the UK and Ireland. This role sits at the centre of the operation and is responsible for ensuring deliveries are executed safely, efficiently and in line with strict customer and regulatory requirements.You will be responsible for controlling daily delivery plans, managing drivers and vehicles during live operations, responding to issues as they arise, and ensuring customers are kept informed. The role requires calm decision-making, strong organisation, and the ability to prioritise under pressure. Key Responsibilities Controlling and delivering daily transport plans, ensuring the right resources are in place Managing drivers during their shifts, ensuring work is completed safely, legally, and on time Identifying and resolving operational issues such as delays, missed deliveries, vehicle defects, or resource shortages Replanning work in real time to minimise disruption and avoid service failures Keeping customers informed of delays or changes, following agreed communication processes Preventing operational and stock errors by ensuring correct loads, documentation, and system entries Managing vehicle defects, breakdowns, and maintenance issues in coordination with workshops and suppliers Acting as a first point of contact during incidents or emergencies and escalating appropriately Maintaining clear and accurate shift handovers so ongoing issues are properly managedWhat We're Looking For Experienced in a similar role within a Logistics Distribution and Supply Chain environment. Strong administrative skills with a high level of attention to detail Ability to work to deadlines in a fast-moving, live environment Good understanding of driver hours, compliance, and operational risk Confident communicator, comfortable dealing with drivers, customers, and internal teams Calm, structured approach to problem-solving, especially under pressure

Building Surveyor (Maintenance) with United Reform Church!. Building Surveyor (Maintenance) for the United Reform Church (Thames North Synod Property Team). This is an exciting opportunity to provide expert advice and hands-on support for property matters across the Synod, including development, rep

You will provide support to the Housing Repairs & Maintenance Co-Ordinator on the implementation of the Council’s housing repair and maintenance strategy. Major investment programmes have been carried out as part of our long-term approach to managing our housing assets and our focus is on protecti

Hays Property & Surveying are pleased to be working with a leading Local Authority to provide an Interim Maintenance Surveyor within Central Hampshire. As a Building Surveyor, you’ll play a key role in delivering high-quality maintenance and repair services across a residential housing portfolio.

You will work directly to the Senior Engineer – Road Maintenance delivering the team’s functions and road asset management activities including: investigation of customer enquiries and complaints; asset inspections; asset surveys; small scale design of road repairs; the preparation of minor work

Mobile Maintenance Electrician – Kent Salary: £36,000 – £38,000Temporary. Due to new contract wins, the team is expanding and seeking a skilled professional to support their growing maintenance workload. Planned Preventative Maintenance (PPM) tasks.

Electrical Maintenance Engineer, Maintenance Engineer, Maintenance Technician, Electrical Engineer, Automation Engineer, Multi-skilled Maintenance Engineer, Maintenance Electrician, Robotics EngineerApply now or to discuss this Electrical Maintenance Engineer role, please contact Eleanor Crummey. NV

Assistant FM Manager-Prison Maintenance. A large FM and Maintenance contractor who runs the contract for the Ministry of Justice to maintain UK Prisons has an exciting opportunity. To assist and manage and deliver a proactive service in delivering planned maintenance and remedials on behalf of the c

Reference: 23531D Key Words: Maintenance Engineer, Mechanical Maintenance, Multi-Skilled, Electrical Technician, Electrical Maintenance, Maintenance, Engineer, Food, Packaging, FMCG, PPM, Packaging, Pontefract, Leeds, Wakefield, Yorkshire, Shifts, Days-Based If you're interested in this role, click

Maintenance Engineer * Maintenance and repair of specialist manufacturing machinery *Days based - Monday - Friday. Maintenance Engineer *Wanting to join established company *Wants to develop skillset through technical training. Electrical Maintenance Engineer.

Electrical Maintenance Engineer, Maintenance Engineer, Maintenance Technician, Electrical Engineer, Automation Engineer, Multi-skilled Maintenance Engineer, Maintenance Electrician, Robotics EngineerApply now or to discuss this Electrical Maintenance Engineer role, please contact Eleanor Crummey. El

The purpose of this role is to maximise machinery availability through the delivery of planned preventative maintenance (PPM) and the timely resolution of breakdowns across plant, equipment, and electrical infrastructure.

You will be responsible for electrical fault-finding, breakdown response, and planned maintenance activities on production machinery, supporting continuous improvement and minimising downtime. Electrical and Mechanical maintenance experience within an industrial manufacturing environment. Requiremen

Commercial Maintenance Electrician - Multiple Locations?? Sheffield * Doncaster * Barnsley * Lincolnshire * Chesterfield?? Multiple Temporary Positions Available (Covering One Area Each)?? Van + Fuel Card | 37 Hours Per Week | Competitive PayAre you an experienced Commercial Maintenance Electrician

With continued investment across the site, they're looking for a Carding Maintenance Engineer to support an existing team with carding machinery performance, reliability and quality. Carrying out planned preventative maintenance (PPM) on carding machines2.

Keywords: Maintenance Engineer, Mechanical Maintenance Engineer, Electrical Maintenance Engineer, Plant Engineer, Multi Skilled Engineer, Shift Engineer, Field Service Engineer, Facilities Engineer, Site Services Engineer, Automation Engineer Reference Number: BBBH267540 To apply for this role or to

Carrying out planned preventative maintenance (PPM). Completing maintenance reports and documentation. Proven experience in a maintenance engineering role.

In this role, you'll be responsible for the installation, service, and maintenance of CNC and manual machining equipment across customer sites throughout the UK, with occasional overseas travel. This position would suit an engineer with hands-on CNC maintenance experience who is looking for a long-t

A well-established manufacturing business operating advanced packaging and processing machinery is seeking a Multi-Skilled Maintenance Engineer to join its engineering department. The Multi-Skilled Maintenance Engineer will play a key role in maintaining, repairing, and improving a wide range of pro

Experience with CAFM systems and data-driven maintenance planning. Interim Head of Maintenance & Infrastructure. Head of Maintenance & Infrastructure.

Job Title - Mechanical Maintenance Engineer. A standout opportunity has become available for a high-performing Mechanical Maintenance Engineer to join a state-of-the-art, fully automated manufacturing facility. Hands on experience with pre-planned, reactive and breakdown maintenance in fast paced in

Working to deliver the best quality service, carrying out planned repairs to void properties, you’ll undertake a variety of trade repairs and maintenance work. Our services include, responsive repairs, void refurbishments, compliancy services and planned maintenance works.

Are you an experienced Mechanical Maintenance Fitter looking to take your career to the next level?. Our client in Northumberland is seeking a Heavy Plant Fitter to join their dynamic maintenance team, where every day brings new challenges and opportunities!. We are on the lookout for an experience

You will be joining a leading national organisation responsible for delivering facilities management and accommodation maintenance services across a significant UK estate. As a Void Maintenance Officer, you will take ownership of managing and protecting unoccupied homes across multiple estates withi

Your role as multi-skilled maintenance engineer:. Multi Skilled Maintenance Engineer * Mechanical and Electrical fault finding * PPM and Breakdown * 4 on 4 off. As a multi-skilled maintenance you'll need:.

Maintain accurate maintenance records. Multi-Skilled Maintenance Engineer. PPM systems and breakdown maintenance.

LOLER for lifting accessories used in facilities, PUWER for tools, PSSR for pressure systems, and Legionella control) - Ensure robust contractor management including permit to work, inductions, competency checks, and supervision - Report hazards, near misses, and incidents promptly; participate in i

Mechanical, Electrical, Engineer, Service, Maintenance, Repairs, Diagnostics, Training, Progression, Air, Compressed Air, Suffolk, East Anglia, England. Are you a Maintenance Engineer or similar, coming from a background within the Electromechanical Sector and/or a related field, specifically with a

Would you like the opportunity to combine your love for water sports and skills in maintenance with travelling? Mark Warner invites you to join our team as a Bosun in one of our stunning Mediterranean resorts. Keeping maintenance area tidy and making sure tools and hazardous materials are all stored