Manufacturing engineering jobs in GrimsbyCreate job alerts

Recycling Plant Engineer\n Location: North East LincolnshireSalary: £45,000 per annumHours: 45 hours per weekShift Pattern: NegotiableOvertime / Shift Allowance: Paid at 1.5xHoliday: 25 daysJob Type: Permanent The Opportunity\n We are recruiting for an experienced Recycling Plant Engineer to join a modern plastics recycling facility. \n The site processes mixed plastic bottles and converts them into clean, high-quality recycled feedstock for manufacturers. This is an excellent opportunity for a practical, hands-on engineer who enjoys working in a busy production environment and has strong mechanical fitting, maintenance, welding/fabrication and electrical fault-finding experience. \n You will play a key role in keeping the recycling operation running efficiently, carrying out planned and reactive maintenance across a wide range of processing, plant and mobile equipment. Key Responsibilities\n\n • Carry out mechanical fitting, installation, maintenance and repair of plant and machinery.\n, • Ensure recycling and processing equipment is operating safely and efficiently.\n, • Service, maintain and repair balers, sortation machinery and mobile plant.\n, • Carry out forklift maintenance and repairs.\n, • Undertake welding and fabrication work on heavy machinery, plant and site equipment.\n, • Maintain and repair conveyors, pumps, motors, gearboxes, valves and other mechanical equipment.\n, • Maintain PLC-controlled equipment and automated sortation machinery.\n, • Carry out mechanical and electrical maintenance of process equipment.\n, • Maintain and repair balers, compactors and shredding machinery.\n, • Carry out fault finding, diagnostics and reactive breakdown repairs.\n, • Complete planned preventative maintenance (PPM) and accurately record follow-up work.\n, • Assist with equipment improvements, modifications and installation work where required.\n, • Maintain high standards of housekeeping across the site.\n, • Respond to breakdowns and occasional call-outs when required.\nAbout You\n The successful candidate will be a hands-on Mechanical Engineer / Fitter with experience working with industrial machinery and ideally within a manufacturing, recycling, production or similar environment. \n You should have: \n\n • Strong mechanical maintenance and fitting experience.\n, • Experience maintaining industrial plant and heavy machinery.\n, • Welding and fabrication skills.\n, • Experience with forklift maintenance and repair.\n, • Good electrical fault-finding and diagnostic skills.\n, • Experience working with conveyors, motors, gearboxes, pumps and similar industrial equipment.\n, • Experience with balers, compactors, shredders or recycling machinery would be advantageous.\n, • The ability to diagnose faults and carry out effective repairs with minimal supervision.\n, • A proactive approach to preventative maintenance and equipment reliability.\n, • A flexible approach to occasional call-outs and breakdown situations.\nWhat's on Offer\n\n, • £45,000 basic salary\n, • Overtime / shift allowance paid at 1.5x\n, • 25 days' holiday\n, • Pension scheme\n, • Life assurance\n, • 45-hour working week\n, • Negotiable shift pattern\n, • Varied, hands-on engineering role\n, • Opportunity to work across mechanical fitting, maintenance, welding/fabrication, forklifts and recycling process equipment\n, • Flexible approach to additional hours, with hours returned where possible\n\n If you're an experienced Mechanical Fitter / Maintenance Engineer with strong practical skills and enjoy working on a wide range of heavy industrial equipment, this could be an excellent opportunity to join a growing recycling operation.

Multi-Skilled Maintenance Engineer (Electrical Bias)\n Location: Grimsby Salary: £40,000-£43,000 Shifts: Days, covering 5 out of 7 days \n We are recruiting on behalf of our client for a Multi-Skilled Maintenance Engineer with a strong electrical bias to join a busy and well-established food manufacturing operation. \n This is an excellent opportunity for an experienced engineer to join a forward-thinking business where you'll play a key role in maintaining and improving production equipment, ensuring maximum reliability and efficiency across the site. The Role\n Working as part of the engineering and maintenance team, you will be responsible for planned preventative maintenance, breakdown response, fault finding, and continuous improvement activities across a range of automated production machinery and equipment. Key Responsibilities\n\n • Carry out planned preventative maintenance (PPM)\n, • Diagnose and repair electrical and mechanical faults\n, • Minimise downtime and support continuous production\n, • Maintain and improve automated machinery and control systems\n, • Support installation, commissioning, and modification of equipment\n, • Read and work from electrical and mechanical drawings\n, • Assist with continuous improvement and process optimisation projects\n, • Ensure all work is completed safely and in line with company procedures\nAbout You\n We are looking for a proactive and hands-on engineer with strong fault-finding ability and experience within a manufacturing or production environment. Essential Skills & Experience\n\n • Apprentice trained or engineering qualified\n, • Strong electrical maintenance background\n, • Multi-skilled with good mechanical knowledge\n, • Experience fault finding on production/manufacturing equipment\n, • Knowledge of PLC-controlled machinery and automation systems\n, • Ability to read electrical and engineering drawings\n, • Strong understanding of health & safety procedures\n, • Excellent problem-solving skills and ability to work independently\nDesirable Experience\n\n, • Experience within automated manufacturing environments\n, • Knowledge of pneumatics, hydraulics, and control systems\n, • Previous involvement in continuous improvement activities\nWhat's on Offer\n\n, • Competitive salary package\n, • Overtime opportunities\n, • Stable and growing business\n, • Training and development opportunities\n, • Supportive engineering team and modern production environment\n, • Pension and holiday package\n\n This is a fantastic opportunity for a skilled maintenance engineer looking for a varied and rewarding role within a highly automated engineering environment.

Maintenance EngineerSalary: £44,896 + Pension + OvertimeShift Pattern: 5am-2pm/9am-6pm Monday Friday + On Call every other Saturday (AM)Location: GrimsbyReference: Jo7382 /SBThe CompanyAn excellent opportunity has arisen with one of the UKs leading food manufacturers, a growing and supportive organisation . The Company have been established for over 20 years and is a truly British manufacturer and is one of the largest food processors of their kind in Europe, within its chosen field of specialism. They are looking to expand their engineering team once again due to increased growth in their market share.Key SkillsApprentice Trained EngineerExperience of PLCs & Automated MachineryUnderstanding of PPM SystemsThe RoleYou will have served a minimum of a full apprenticeship in electrical or mechanical engineering and have experience working within planned and preventative maintenance schedules, project-based work within a high speed automated environment. There will be lots of fast moving machinery such as flow wrappers and labelling machines, together with packaging and conveyor systems, fryers, labellers, slicers and Multivacs. On a day to day basis, you will work on fast moving machinery including some general mechanical work when required. There is a huge amount of training on offer so the successful candidate will be in line to broaden their skills considerably.If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally and the company is looking to recruit this role as soon as possible.ETSConsultingLtd Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets.ETSConsultingLimited act as an employment business and employment agency and are registered in England and Wales asETSConsultingLimited, registered no 06164846. Registered office address 7 Stamford Square, Ashton Under Lyne, Lancashire, United Kingdom, OL6 6QU.If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provideETSConsultingwith proof of your identity along with proof of your eligibility to work in the United Kingdom.TPBN1_UKTJ

The RolePermanentFull TimeThe Branch Manager, internally known as Insite Manager is a pivotal on-site leader responsible for the seamless delivery of the customer contract at a major aerospace organisation based in Grimsby. As the dedicated Rubix representative on site, you will manage day-to-day operations, ensure exceptional service delivery, and act as the trusted point of contact for the customer.Reporting to the Regional Insite Manager, you will oversee all aspects of on-site performance, including inventory management, service excellence, continuous improvement and the achievement of contractual KPIs. This role blends operational leadership, customer relationship management, commercial awareness and problem-solving to drive value and strengthen our partnership with the customer.Key ResponsibilitiesCustomer Relationship ManagementOversee the daily execution of the contract, ensuring compliance with service level agreements and contractual customer requirements.Act as the primary day-to-day contact for the customer.Build strong relationships with stakeholders across the site.Develop trust and credibility through responsive service and problem resolution.Attend engineering meetings and support operational discussions.Operational ManagementManage the on-site supply solution and ensure smooth day-to-day operation.Monitor and replenish stock cabinets and vending solutions across the site.Process customer orders and coordinate product deliveries.Ensure critical stock availability and minimise operational downtime.Commercial & Financial ManagementResponsible for delivering the sales and margin budget whilst identifying opportunities to increase product penetration and service utilisation.Ability to accurately forecast weekly against budget.Collaborate with the Product Business Units to offer tailored solutions that deliver the best value to the customer.Source products and services while maintaining margin awareness.Prepare quotations and negotiate pricing where appropriate.Responsible for the account profitability and commercial performance.Problem Solving & Continuous ImprovementRespond to customer issues and coordinate effective solutions.Work with suppliers, internal teams and engineering specialists to resolve challenges.Identify cost-saving opportunities and process improvements.Support initiatives such as maintenance solutions, repair services, engineering surveys and efficiency projects.Performance & ComplianceDeliver against contractual KPIs and service level expectations.Maintain accurate reporting and operational records.Promote a strong health and safety culture.Identify and report potential safety concerns and operational risks.Ideal Candidate ProfileEssentialExperience within a manufacturing, engineering, industrial or MRO environment.Strong customer-facing and stakeholder management skills.Experience working independently and taking ownership of operational activities.Commercial awareness with an understanding of pricing, margins and profitability.Strong organisational and problem-solving abilities.Exposure to P&L responsibility, budgeting or commercial decision-making.Confident communicator capable of influencing decisions and building relationships.Full UK Driving LicenceDesirablePrevious experience in operations management, engineering stores, manufacturing support, branch management or account management.Knowledge of Kerridge K8 or similar ERP systemsMRO (Maintenance, Repairs & Overhaul) Product Knowledge.Experience supporting maintenance, repair and operational activities within manufacturing environments.What Success Looks LikeThe successful candidate will become a trusted extension of the customer's team, ensuring products and services are delivered efficiently, operational issues are resolved quickly, stock availability is maintained, and opportunities for growth and continuous improvement are consistently identified.This role would suit someone who enjoys autonomy, thrives in a customer-facing environment and has the confidence to take ownership of a strategically important site.TPBN1_UKTJ

Company DescriptionDunlop Oil & Marine is a world leader in the design, manufacture and supply of hoses for the oil, gas and petrochemical industries, for both offshore and onshore based operations.Job DescriptionPrinciple Accountabilities Duties, Responsibilities and Key TasksCoordinate the review, update and issue of company documentation as required, maintaining the records for document updates when completed.Act as plant administrator of the Compliance Quest (CQ)Plan, coordinate and conduct Internal Audits as scheduled for both Grimsby & BlythMaintain Quality procedures up to date and in conformance with the latest standardsRegister Customer Incidents received and coordinate the investigation and monitoring of actions completed, through to final close out.Coordination and maintenance of all National and International standards together with the internal ‘Wisdom’ team, as required by the organisation.Regular analysis of QMS data for trend monitoring and to raise findings and concerns.Development and delivery of Quality related training across the company including Quality induction for new employees.Update the quality related functions within SAP for all new order releases, items codes to allow for the timely and effective release of the materials and products as and when required.Provide support to the Quality Manager, Lead Document Controller and QA Inspectors, where required, to ensure the smooth flow of work through this area.Maintain production welder qualifications to meeting APIQ1/17K standards.Lead problem solving activities and chase actions through to completion as required.QualificationsExperience RequiredMinimum 5 years experience of Quality within a manufacturing environment, working withQuality Management Systems, ie, ISO9001 or similar.Experience of API Q1 and/or API technical specification advantageousInternal and/or supplier auditing experienceWorking successfully with cross functional teams at all levels of an organisationKnowledge RequiredGood knowledge of the Company productsExcellent understanding of Quality System Processes, procedures and standardsRoot Cause Analysis (RCA) and other quality improvement toolsQuality, Environmental and H&S SystemsUnderstanding of SAP and API specificationsQualifications / Skills RequiredTrained ISO 9001 auditor (Lead Auditor qualification preferred)Good, working knowledge of MS Office, Adobe Acrobat and similar applicationsGood understanding of cloud based applications, ie. Salesforce or similarAbility to work as part of a team and work efficiently to meet deadlinesConfident when dealing with external parties; customers, suppliers and accreditation bodiesOrganised and methodical with a structured approach to task managementAdditional InformationCompetitive pension SchemeOn site gymBonus Scheme26 days holidays plus bank holidays(pro rata for part time and shift workers)On site subsidized canteen Cycle to Work SchemeOnsite free parkingPMIReady to drive with Continental? Take the first step and fill in the online application.SummaryType: Full-timeFunction: ManufacturingExperience level: Not ApplicableIndustry: Mechanical Or Industrial Engineering

Multi-Skilled Maintenance Engineer (Electrical Bias) ?? Location: Grimsby ?? Salary: £40,000-£43,000 ?? Shifts: Days, covering 5 out of 7 days We are recruiting on behalf of our client for a Multi-Skilled Maintenance Engineer with a strong electrical bias to join a busy and well-established food manufacturing operation. This is an excellent opportunity for an experienced engineer to join a forward-thinking business where you'll play a key role in maintaining and improving production equipment, ensuring maximum reliability and efficiency across the site. The Role Working as part of the engineering and maintenance team, you will be responsible for planned preventative maintenance, breakdown response, fault finding, and continuous improvement activities across a range of automated production machinery and equipment. Key Responsibilities Carry out planned preventative maintenance (PPM) Diagnose and repair electrical and mechanical faults Minimise downtime and support continuous production Maintain and improve automated machinery and control systems Support installation, commissioning, and modification of equipment Read and work from electrical and mechanical drawings Assist with continuous improvement and process optimisation projects Ensure all work is completed safely and in line with company procedures About You We are looking for a proactive and hands-on engineer with strong fault-finding ability and experience within a manufacturing or production environment. Essential Skills & Experience Apprentice trained or engineering qualified Strong electrical maintenance background Multi-skilled with good mechanical knowledge Experience fault finding on production/manufacturing equipment Knowledge of PLC-controlled machinery and automation systems Ability to read electrical and engineering drawings Strong understanding of health & safety procedures Excellent problem-solving skills and ability to work independently Desirable Experience Experience within automated manufacturing environments Knowledge of pneumatics, hydraulics, and control systems Previous involvement in continuous improvement activities What's on Offer Competitive salary package Overtime opportunities Stable and growing business Training and development opportunities Supportive engineering team and modern production environment Pension and holiday package This is a fantastic opportunity for a skilled maintenance engineer looking for a varied and rewarding role within a highly automated engineering environment. TPBN1_UKTJ

Recycling Plant Engineer Location: North East Lincolnshire Salary: £45,000 per annum Hours: 45 hours per week Shift Pattern: Negotiable Overtime / Shift Allowance: Paid at 1.5x Holiday: 25 days Job Type: Permanent The Opportunity We are recruiting for an experienced Recycling Plant Engineer to join a modern plastics recycling facility. The site processes mixed plastic bottles and converts them into clean, high-quality recycled feedstock for manufacturers. This is an excellent opportunity for a practical, hands-on engineer who enjoys working in a busy production environment and has strong mechanical fitting, maintenance, welding/fabrication and electrical fault-finding experience. You will play a key role in keeping the recycling operation running efficiently, carrying out planned and reactive maintenance across a wide range of processing, plant and mobile equipment. Key Responsibilities Carry out mechanical fitting, installation, maintenance and repair of plant and machinery. Ensure recycling and processing equipment is operating safely and efficiently. Service, maintain and repair balers, sortation machinery and mobile plant. Carry out forklift maintenance and repairs. Undertake welding and fabrication work on heavy machinery, plant and site equipment. Maintain and repair conveyors, pumps, motors, gearboxes, valves and other mechanical equipment. Maintain PLC-controlled equipment and automated sortation machinery. Carry out mechanical and electrical maintenance of process equipment. Maintain and repair balers, compactors and shredding machinery. Carry out fault finding, diagnostics and reactive breakdown repairs. Complete planned preventative maintenance (PPM) and accurately record follow-up work. Assist with equipment improvements, modifications and installation work where required. Maintain high standards of housekeeping across the site. Respond to breakdowns and occasional call-outs when required. About You The successful candidate will be a hands-on Mechanical Engineer / Fitter with experience working with industrial machinery and ideally within a manufacturing, recycling, production or similar environment. You should have: Strong mechanical maintenance and fitting experience. Experience maintaining industrial plant and heavy machinery. Welding and fabrication skills. Experience with forklift maintenance and repair. Good electrical fault-finding and diagnostic skills. Experience working with conveyors, motors, gearboxes, pumps and similar industrial equipment. Experience with balers, compactors, shredders or recycling machinery would be advantageous. The ability to diagnose faults and carry out effective repairs with minimal supervision. A proactive approach to preventative maintenance and equipment reliability. A flexible approach to occasional call-outs and breakdown situations. What's on Offer £45,000 basic salary Overtime / shift allowance paid at 1.5x 25 days' holiday Pension scheme Life assurance 45-hour working week Negotiable shift pattern Varied, hands-on engineering role Opportunity to work across mechanical fitting, maintenance, welding/fabrication, forklifts and recycling process equipment Flexible approach to additional hours, with hours returned where possibleIf you're an experienced Mechanical Fitter / Maintenance Engineer with strong practical skills and enjoy working on a wide range of heavy industrial equipment, this could be an excellent opportunity to join a growing recycling operation

Laboratory Technician - Materials Testing & Quality Assurance We are looking for a motivated and detail-oriented Laboratory Technician to join our Quality team. This is an excellent opportunity for an individual with laboratory and materials testing experience who enjoys working in a fast-paced manufacturing environment. The successful candidate will play a key role in ensuring products meet the highest quality standards through testing, reporting, calibration, and quality control activities. You will work closely with production teams, inspectors, and internal stakeholders to support the delivery of certified, high-quality products. Key Responsibilities Prepare, test and report hose carcass adhesions in line with quality standards and certification requirements. Conduct testing and reporting of polyurethane (PU) hose covers. Sample, mould and test rubber compounds to required specifications. Sample, test and label incoming goods and overage materials. Maintain accurate paper and electronic laboratory records. Perform cord extraction testing on serviced hoses following solvent treatment. Sample, test and adjust concentration levels of wash reagents from production fittings tanks. Assist with training and supporting new team members. Respond to enquiries from internal departments and provide technical support where required. Carry out internal calibration checks on laboratory instrumentation and equipment. Maintain excellent housekeeping standards within the laboratory. Follow all health and safety procedures and actively contribute to a safe working environment.What We're Looking For Essential Experience Previous laboratory and materials testing experience. Experience working within a manufacturing, engineering, quality, or industrial environment. Strong record-keeping and reporting skills.Knowledge & Technical Understanding Good understanding of: Chemistry and/or materials science. Laboratory operations and best practices. Laboratory testing techniques and procedures. Laboratory equipment and instrumentation. Quality testing methods and standards.Qualifications A-Level or equivalent qualification in Science, Materials, Engineering, or a related discipline.Skills & Attributes Strong laboratory and IT skills. Excellent verbal and written communication skills. Well-organised with the ability to manage changing priorities. Self-motivated and proactive approach to work. Strong attention to detail and commitment to quality. Team player with the ability to build effective working relationships across departments.Why Join Us? Opportunity to work within a highly respected quality-focused manufacturing environment. Varied and hands-on laboratory role. Ongoing training and development opportunities. Supportive team culture. Opportunity to contribute directly to product quality and customer satisfaction.If you are an organised and technically minded Laboratory Technician looking to develop your career within a quality-driven organisation, we'd love to hear from you. Apply today to find out more

Take ownership of compliance in a technically challenging manufacturing environment Consortium Professional Recruitment are pleased to be working with an established manufacturing business to recruit a Compliance Manager for its Scunthorpe operation. Reporting to the Operations Director, this is a key permanent appointment with responsibility for ensuring products, processes and systems continue to meet relevant regulatory, legislative and certification requirements. You will work across technical and operational teams, providing practical compliance leadership while protecting product integrity and supporting future growth. The Opportunity: As a Compliance Manager you’ll play a key role in: Leading compliance with relevant regulations, legislation, technical standards, certification schemes and third-party approvals. Maintaining product compliance throughout design, manufacture, certification and the wider product lifecycle. Managing relationships with certification bodies, testing organisations, auditors and other external technical partners. Reviewing engineering and product changes to ensure regulatory and certification requirements remain fully considered. Monitoring changes to legislation, standards and industry guidance, assessing business impact and coordinating appropriate actions. Your work will directly contribute to maintaining product integrity, strengthening technical governance and ensuring compliance remains embedded within day-to-day business decision-making. About You: We’re looking for someone who can bring: Significant experience within a compliance, technical or quality management role in a regulated manufacturing environment. Strong knowledge of product testing, certification and third-party approval processes. Experience interpreting and applying complex technical standards, legislation and regulatory requirements. Experience managing external audits, certification bodies and significant technical compliance projects. A track record of identifying compliance risks and resolving complex technical or regulatory challenges. You will be confident translating detailed requirements into clear, practical actions for colleagues across the organisation. Strong project management, analytical, report writing and organisational skills will be important, together with the ability to build credibility and influence stakeholders at different levels. A degree or equivalent qualification in Engineering, Manufacturing, Quality, Construction or a related discipline would be welcomed, although equivalent industry experience will also be considered. The successful Compliance Manager will combine commercial awareness with regulatory integrity and a collaborative approach to problem-solving, helping to build greater compliance understanding and ownership across the business. The Benefits and Package: In return, you’ll enjoy: Salary of £45,000 to £55,000 How to Apply: This exciting Compliance Manager opportunity is being managed by Consortium Professional Recruitment, a trusted recruitment partner with a Human First approach. If you’re looking for a long-term position where your technical expertise can influence products, processes and business decisions, we’d love to hear from you. Please apply with your CV attached. Consortium Professional Recruitment Ltd are a professional level recruitment consultancy specialising in the delivery of high relevance recruitment services on behalf of our clients across the UK. We regularly receive large responses to our advertising which can make providing individual feedback to every applicant challenging. If you haven’t received a reply from us within 14 days of your application, we regret to say your application has been unsuccessful on this occasion. We have a policy of retaining your details for future vacancies unless you request otherwise. To learn more about our services, please visit (url removed)

Maintenance Engineer – Mechanical Bias (Multi-Skilled / Shift Engineer) Location: Commutable from Grimsby, Louth, Immingham, Cleethorpes or Ludborough Salary: Circa £45,000 + Overtime (1.25x), Pension, Holidays Shift Pattern: Currently 4 on / 3 off rotating days and nights (6am–6pm / 6pm–6am) Moving to a 4 on / 4 off rotating days and nights pattern I’m recruiting on behalf of a modern, well-invested manufacturing business near Grimsby who are looking to add a mechanically biased, multi-skilled Maintenance Engineer to their engineering team. This role would suit a hands-on Shift Engineer who enjoys working in a fast-paced production environment and takes pride in maintaining plant assets to the highest standards. The site is a clean, non-food manufacturing facility with a strong mechanical focus and ongoing investment in plant and equipment. The Role Reporting into the Engineering Manager (or Production Manager in their absence), you will be responsible for ensuring the safe, efficient and reliable operation of all plant and production equipment. Your key responsibilities will include: Production & Engineering Maintaining all plant and production assets to the highest possible standards. Completing planned preventative maintenance (PPM) in line with schedules set by the Engineering Manager, ensuring all documentation is accurate and up to date. Responding to plant and production breakdowns with urgency, prioritising work as directed by the Engineering Manager or Shift Supervisor. Mechanical fault finding and repair on conveyors, gearboxes, bearings, pumps, chains, belts, hydraulics and pneumatics. Supporting production teams with day-to-day engineering issues as required. Working through engineering job lists and supporting improvement and reliability activities. Minimising costs through the efficient use of consumables and spare parts. Carrying out basic electrical tasks, such as motor changes, isolations and replacement of simple components where required. Health, Safety & Compliance Ensuring a safe and healthy working environment at all times. Adhering to Safe Working Procedures (SWPs) and reporting any issues promptly to the Engineering Manager, Site Manager or Compliance Manager. Ensuring correct PPE is used at all times and escalating any requirements. Maintaining excellent housekeeping standards and promoting a “clean as you go” culture within the engineering department. Communication & Shift Handover Managing effective shift handovers to ensure continuity of production. Communicating breakdowns, site issues and outstanding actions clearly to the oncoming shift. Completing shift reports and distributing them to engineering and production management at the end of each shift. Highlighting critical and routine spare parts requirements to the Engineering Manager. Escalating any concerns where breakdowns cannot be resolved promptly. What I’m Looking For Apprentice-trained Maintenance Engineer with a strong mechanical bias. Experience in a manufacturing or industrial environment. Strong mechanical fault-finding skills on production equipment. Comfortable carrying out basic electrical work only (e.g. motor changes). Able to work independently on shift. Strong communication and teamwork skills. Own transport required due to site location. What’s on Offer Salary in the region of £45,000 per annum. Overtime paid at 1.25x basic rate. 25 days holiday plus bank holidays. Company pension scheme. Modern manufacturing environment with well-maintained equipment. Long-term stability with training and progression opportunities. #DONENGP At Venatu Recruitment Group, your right to privacy is important to us. By applying for this job, your information will be entered into our recruitment system. This will enable you to register for job alerts, apply for jobs and for us to help you find your next role. To read our full privacy policy please visit our website

Working closely with production, quality and engineering teams, you will play a key role in improving manufacturing processes, supporting production activities and ensuring products are manufactured safely, efficiently and in line with stringent industry standards. Manufacturing Engineer North West

Embed DevSecOps and SRE practices across the Engineering team: SLOs/SLIs, error budgets, incident management, post-mortems, capacity & resiliency engineering. The Head of Engineering will define and deliver all aspects of our software engineering strategy. Embed security-by-design principles into al

Reporting to the Managing Director, you will be responsible for continuously improving the manufacturing operations in terms of productivity, quality, safety & operating expense by utilising lean manufacturing techniques. A recognised Manufacturing qualification OR demonstrated experience in a m

Proven experience within a H&S role within an engineering or manufacturing environment. This job is posted by Euro Projects Recruitment, a recruitment consultancy specialising in engineering and manufacturing appointments from tool room to boardroom.

Experience in technical support, customer service or product support within construction products, manufacturing or a similar technical environment.

You will be an experienced HSE leader with a track record of operating in manufacturing, engineering or other complex operational environments. The role operates on a hybrid basis and includes travel across a network of 12 manufacturing sites, predominantly within Yorkshire. Reporting directly to th

Financial Director (Manufacturing / Engineering) – EMBS, Nottinghamshire, England, United Kingdom. Someone who can combine sharp commercial insight with financial discipline, and who has a proven track record of success in engineering and manufacturing environments. At least 5 years’ experience

This Health and Safety Manager job will suit: Proven experience within a H&S role within an engineering or manufacturing environment. This job is posted by Euro Projects Recruitment, a recruitme

Ideal candidates will have over 5 years of experience in finance within engineering or manufacturing sectors. A dynamic engineering company in Nottinghamshire is looking for a Finance Director to lead financial strategy and manage profitability.

You will be an experienced HSE leader with a track record of operating in manufacturing, engineering or other complex operational environments. Reporting directly to the CEO, this is a high-impact Group leadership opportunity within a successful international manufacturing organisation. Working clos

This hands-on position involves supporting aerospace manufacturing production teams, resolving technical issues, and driving continuous improvement in a fast-paced environment.

Supervise engineering operations in a food manufacturing plant, with a clear path for career advancement into management roles.

Detail-oriented professional to ensure product quality and compliance in manufacturing.

Engineering Team Leader (Manufacturing). Manufacturing, Electrical, Mechanical, Maintenance, Engineer, Electrical, Production, Engineering, Lead, Supervisor, Manager, Oxford, Bicester, Warwick, Towcester, Brackley, Daventry. In this role you will be leading a small team of Maintenance Engineers, foc

This is an excellent opportunity for a skilled machinist with experience of CNC milling and turning to join a supportive engineering team. Travis Talent is recruiting an experienced CNC Machinist on behalf of an established manufacturing business in Sheffield.

Maintenance Technician - Advanced Engineering & Manufacturing. Ready to get hands-on with cutting-edge defence technology? Looking for a role where your engineering skills genuinely matter? Join a high-tech UK manufacturing site specialising in complex, safety-critical products - where reliability,

Position: Buyer - Manufacturing.

The Continuous Improvement Engineer will lead initiatives to optimize manufacturing processes, eliminate waste, and improve efficiency.

Well-maintained plant with ongoing investment in equipment and engineering capability. Secure role within a stable, established manufacturing business. This is a hands-on, site-based opportunity for a multi-skilled maintenance technician supporting a fast-paced, high-volume manufacturing operation.

Manage commercial aspects of a manufacturing/engineering business, lead a team, liaise with customers for estimates and business development, and negotiate with suppliers.

Reed Engineering & Manufacturing are working with a leading Engineering & Manufacturing company. Days-based role | Aerospace Manufacturing.

Key Responsibilities Perform MIG & TIG welding to a high standard Fabricate components in stainless steel Work confidently from detailed engineering drawings Ensure accuracy, consistency, and high-quality output Maintain a safe, efficient, and productive working environment Requirements Level 3 City

Manufacturing Engineering Lead. Are you a driven Manufacturing Engineering Leader with a passion for project delivery, process optimisation, and continuous improvement within a highly engineered, mission-critical environment?. I'm supporting a leading defence and maritime engineering organisation de

Our client is currently looking for a Manufacturing & Engineering Supervisor to join them on a permanent basis. The successful candidate will provide engineering expertise, supervise workshop activities, coordinate production, manage custome.

Supervise a team of engineers, manage maintenance schedules, troubleshoot electrical systems, and drive safety compliance.

Supervise engineering operations in a food manufacturing plant, with a clear path for career advancement into management roles.

What you'll be doing:?? Preventative & reactive maintenance across a wide range of plant and equipment?? Diagnosing faults, tackling root causes and improving long-term reliability?? Reducing downtime using CMMS tools and smart maintenance practices?? Responding quickly and safely to breakdowns?? ??

We are looking for a Senior Manufacturing Engineer to join us at Leonardo in the Luton Manufacturing Engineering Team. As a Senior Manufacturing Engineer, you will be responsible for the smooth transition of our new products from design into manufacture and will lead the front-end manufacturing engi

Carries out electro-mechanical assembly of products, including PCB assembly and harness building, collaborating with the design team.

Community Alarm Team Leader Sessional.Renfrewshire Council’s Community Alarm Service provides an emergency response to over 3000 vulnerable people living at home within Renfrewshire.Main duties include working as part of a team, supporting and directing staff to react promptly to emergency calls r

North West (Primary Manufacturing Site). An established and growing manufacturing business is looking to recruit a. You'll play a key role in maintaining and improving a wide range of industrial manufacturing equipment while contributing to exciting machinery upgrades, capital projects, and continuo

Job Type: Technical / Engineering.

This Manufacturing Team Leader role offers a great opportunity to build and strengthen your manufacturing leadership experience within a hands-on production environment. This is an excellent opportunity to join a busy manufacturing environment where you'll take an active role in leading production t