Offres manufacturing engineering à HerefordCréer des alertes d'emploi

The company: We are a profitable, fast-scaling defence-tech startup - operating on the extreme edge of innovation in the evolving domain of unmanned systems / drones. Our world-class team of Engineers are delivering solutions deemed impossible by many, for some of the most complex and challenging problems in the Drones / UAS space. With strong revenue growth, a loyal customer base, and an ambitious scaling plan, we are entering an exciting new phase of growth — and this is a rare opportunity to join at the moment it matters most. Why this role exists: We have multiple products in active service and demand is growing faster than our current team can deliver. Our engineers are highly capable but overloaded. We need another experienced mechanical design engineer who can take full ownership of detailed design work across our product lines and start delivering from week one. This is a hands-on design role in a small team where the distance between your desk and the workshop is 15 metres. You will design a part, walk downstairs, watch it come off the CNC or out of the printer, assemble the prototype yourself, and iterate the same day. If you have spent your career wishing you were closer to the hardware, this is that job. What you will do: • Own complete mechanical assemblies from concept through production. You are responsible for the 3D model, manufacturing drawings, BOMs, and assembly instructions. When your part goes to the shop floor, the drawing is good enough that a technician can build it without asking you questions., • Design for manufacture from the start. Select the right process for each part: CNC machining, sheet metal, injection moulding, 3D printing, composite layup. Work directly with suppliers and contract manufacturers to resolve DFM issues before committing to tooling., • Integrate across disciplines. Package electronics, wiring, connectors, and mechanical subsystems into tight assemblies. Collaborate daily with electronics and embedded software engineers on PCB form factor, thermal paths, connector placement, and cable routing., • Build and test. Assemble prototype hardware yourself when the timeline demands it. Support environmental and qualification testing: vibration, shock, thermal cycling, IP ingress. Analyse test failures, identify root causes, and fix your designs., • Calculate before you commit. Use hand calculations for loads, fits, thermal expansion, and fastener selection. Use FEA when the problem demands it, not as a substitute for engineering judgment., • Keep clean records. Maintain revision-controlled CAD data. Produce clear engineering change notes. Contribute to technical data packages for customer deliverables. Required experience: • Solid professional mechanical design experience in a product development environment. You must have designed parts that were manufactured and used, not just modelled or analysed., • Strong proficiency in Siemens NX or SolidWorks. Both would be ideal. You need to be productive in 3D CAD from week one., • Demonstrated experience designing for manufacture. You should have designed for at least two of: CNC machining, sheet metal, injection moulding, additive manufacturing, or composites. If you have never thought about how your part gets made, this role will be a struggle., • Experience with GD&T and tolerance analysis. You know why a tolerance exists and can justify it, not just apply a default., • Experience working alongside electronics, software, or systems engineers. Our products are multi-disciplinary. You need to be comfortable designing around other people’s hardware., • Comfortable with hands-on work: building prototypes, basic workshop operations. If you have never touched the things you designed, expect a learning curve. Nice to have: • Experience designing for harsh or demanding environments: defence, aerospace, automotive, marine, industrial, • CNC programming experience (G-code, CAM software). We have in-house machining and someone who can program as well as design is extremely valuable., • Familiarity with environmental testing standards: MIL-STD-810, DEF-STAN, IP ratings, • Experience with PLM/PDM systems (Teamcenter preferred), • Exposure to FEA for structural and/or thermal analysis, • Experience with composite structures or lightweight structural design, • CEng, IEng, or working toward chartership through IMechE or IET Compensation: • Competitive annual salary, • Performance bonus, • Employee stock options, • Life and health insurance, • 35 days annual leave including public holidays

Manufacturing Engineer – NPI 📍 Hereford | 💰 Up to £60,000 | Hybrid Working Are you a Manufacturing Engineer who enjoys turning innovative electronic products into reliable, scalable production builds? We’re working with a growing engineering business developing advanced electronic systems, and they’re looking for someone who can bridge the gap between design and manufacturing, helping prototype and low-volume products move smoothly into production. This role would suit someone with strong electronics manufacturing experience who thrives in fast-moving environments and enjoys solving practical production challenges. The Opportunity You’ll work closely with engineering and production teams to support new product introduction (NPI), improve manufacturability, and help establish robust production processes for complex electronic products. The position offers genuine scope to grow into a more dedicated NPI leadership role over time. What You’ll Be Doing • Supporting the transition of products from prototype into production, • Working with design and manufacturing teams to improve manufacturability and build quality, • Developing production processes, build documentation, and work instructions, • Identifying and solving production and process issues, • Driving continuous improvement across manufacturing and assembly, • Helping scale low-volume products into repeatable production builds, • Supporting ongoing product and process optimisation What We’re Looking For • Experience as a Manufacturing Engineer, Production Engineer, or NPI Engineer, • Background in electronics manufacturing, assembly, or electromechanical products, • Experience supporting prototype, low-volume, or new product introduction environments, • Strong problem-solving skills and a hands-on approach, • Ability to work cross-functionally with engineering and production teams, • Comfortable working in evolving, development-focused environments Nice to Have (Not Essential) • Exposure to high-power electronics, • RF or communications technology experience, • Experience supporting products through scale-up into production Why Join? • Hybrid working flexibility, • Opportunity to influence manufacturing processes from an early stage, • Work on innovative electronic products and technologies, • Clear progression path into a long-term NPI-focused role, • Growing engineering team with strong future investment If you're interested in hearing more, feel free to apply or message directly for a confidential conversation.

INTERNATIONAL RECRUITMENT & HR EXPERTS ACROSS THE PLASTICS, PACKAGING, SPECIALITY CHEMICALS, LIFE SCIENCES, BIOPOLYMER, FOOD ADDITIVES & INGREDIENTS, ENERGY AND RECYCLING SECTORS SINCE 1975. Senior Rubber Technologist Based in Herefordshire Job ref: JH/64950 Sector: Rubber Materials Function: R&D Location: Herefordshire The Client: Our client is a family-owned business specialising in the manufacture of high-performance elastomer components for safety-critical industries, including chemical processing, aerospace, nuclear sectors and high-performance motor sport (Formula 1). They are looking to strengthen the R&D team by employing a motivated Rubber Technologist to join them. You will work closely with the Technical Manager on materials development, product developments and regulations and compliance support. The Role: You will play a pivotal role in ensuring the company’s products remain at the cutting edge of materials technology. As a Senior Rubber Technologist, you will bring proven formulation experience, supporting the company in achieving its development goals while maintaining global compliance standards. This role offers the opportunity to broaden your experience across engineering and manufacturing processes, giving valuable exposure beyond formulation. Responsibilities: • Development of new and existing material formulations, • In the absence of the Technical Manager, supervising laboratory staff, • Work together with the development team for new products, • Maintain and produce certificates of conformance relating to:, • SVHC (REACH), • RoHS, • POPs, • California Proposition 65, • Maintain Safety Data Sheets (SDS) for raw materials and rubber compounds, • Ensure materials meet required certifications (e.g. FDA 21 CFR 177.2600), • Monitor and stay up to date with evolving regulations (e.g. PFAS compliance), • Providing technical support to the commercial team throughout the sales process., • The role will require some customer facing activities Key Requirements: • Proven expertise in rubber formulations, • Degree in Chemical Engineering, Chemistry, Polymer Engineering, or a related field, • Strong problem solving, • Ability to work independently and as part of a team, • Strong analytical approach, with high attention to detail, • Laboratory testing skills Please understand that due to the expected high number of applications, only shortlisted candidates will be contacted directly For UK roles: For reasons of better legibility, the simultaneous use of the language forms male, female and diverse (f/m/d) is avoided. All personal designations apply equally to all genders. For UK roles, candidates must be eligible to work and live in the United Kingdom. Proof of eligibility will be required with your application. To apply please contact Jason Hutchison Jason.hutchison@listgrove.com 0044 (0) 1789 207070 Why select Listgrove? · Five Decades of Market Intelligence · Unrivalled Industry Networks · Recognised International brand · HR Qualified Professionals To hear from our clients on how we have supported their search for talent and HR needs, please visit Listgrove’s Case Studies page. Throughout 2026 & 2027 you can meet with Listgrove at the following exhibitions: Interpack, France Innovation Plasturgie, Interplas UK, Plast Milan, Fakuma, ArabPlast, NPE 2027. Meet us at Plastics Live Ireland in Dublin, 26-27 November, Stand B7 Performance through People. Please visit www.listgrove.com for more information on our services, global success and testimonials. Listgrove Limited Registered in England No: 01197713

Job Description Systems Engineer Location: Herefordshire Clearance Required: This role will require DV clearance. We are looking for an enthusiastic and meticulous Systems Engineer to join our innovative team at Leidos. This is an excellent opportunity for someone technically savvy who is passionate about supporting, maintaining, and improving complex systems. The successful candidate will contribute directly to mission-critical MOD projects that support UK National Security, gaining hands-on experience with advanced technology and system infrastructures. This position offers considerable scope for learning and professional growth within a highly dynamic environment. Key Responsibilities Fault Diagnosis and Resolution: Identify, troubleshoot, and resolve hardware and software issues swiftly to minimise downtime and ensure operational readiness. Inventory & Stores Management: Oversee inventory, track equipment, and manage logistics for system components, maintaining accurate and up-to-date records. Manufacturing Support: Assist in implementing build processes, configuration management, and quality control to uphold system integrity. Cross-Functional Collaboration: Work closely with multidisciplinary teams to support system integration, testing, and deployment activities. Process Documentation: Develop and maintain comprehensive documentation on system processes, configurations, and troubleshooting procedures. Routine Maintenance: Support regular system maintenance, upgrades, and performance monitoring to ensure ongoing efficiency. Safety and Compliance: Uphold all safety guidelines and organisational standards during technical operations. Required Qualifications and Experience Degree or equivalent experience in Systems Engineering, Mechanical and Electrical engineering, or related technical fields. Proven skills in diagnosing and resolving hardware and software faults. Experience in inventory or stores processing and equipment tracking. Excellent analytical and problem-solving abilities with strong attention to detail. Capability to work both independently and collaboratively within a team. Outstanding written and verbal communication skills for technical documentation and reporting. Desirable Experience Exposure to Personal Role Radios (PRRs), including configuration or maintenance. Understanding of Radio Frequency (RF) systems, including their setup, testing, or troubleshooting. Experience with ATAK (Android Tactical Assault Kit) integration or similar tactical communication platforms. Practical experience with IP configuration, including network protocol setup, IP addressing, and routing. Preferred Skills Basic knowledge of network protocols such as TCP/IP, DHCP, and DNS. Familiarity with hardware/software diagnostic tools. Adaptability and eagerness to learn new technologies. Experience in producing technical documentation and reports. Location: This role will be based in Herefordshire, with very occasional travel to other sites. Clearance Required: This role will require DV clearance. For more information and guidance please visit gov.uk/government/publications/united-kingdom-security-vetting-clearance-levels What we do for you: At Leidos we are PASSIONATE about customer success, UNITED as a team and INSPIRED to make a difference. We offer meaningful and engaging careers, a collaborative culture, and support for your career goals, all while nurturing a healthy work-life balance. We provide an employment package that attracts, develops and retains only the best in talent. Our reward scheme includes: Contributory Pension Scheme Private Medical Insurance 33 days Annual Leave (including public and privilege holidays) Access to Flexible benefits (including life assurance, health schemes, gym memberships, annual buy and sell holidays and a cycle to work scheme) Dynamic Working Commitment to Diversity: We welcome applications from every part of the community and are committed to a truly diverse and inclusive culture. We foster a sense of belonging, welcoming all perspectives and contributions, and providing equal access to opportunities and resources for everyone. If you have a disability or need any reasonable adjustments during the application and selection stages please let us know, and we will respond in a way that best fits your needs. Who We Are: Leidos UK & EUROPE we work to make the worldsafer,healthier, andmore efficient through technology, engineering andscience. Leidos is a growing company delivering innovative technology and solutions focused on safeguarding critical capabilities and transformation in frontline services, our work in the United Kingdom includes addressing some of the most complex problems in defence, healthcare, government, safety and security, and transportation. Working together as Team Leidos we are helping to transform the UK's ait traffic management solutions by providing an integration of a complex mixture of services, at low risk, using a modern suite of systems that will deliver one version of the truth. What Makes Us Different: Purpose: you can use your passion and abilities at Leidos to keep the people you care about safe. We are at the forefront of machine learning, AI, cyber security and solutions. Using your skills in the technology frontline by helping to build a safer world. You can inspire change. Collaboration: having flexibility to do your job is one of our core benefits, enabling you to become part of our extraordinary team. We have been empowering our people to work flexibly for years. Whether you work from home, the office or on customer sites, we will give you the digital tools and the flexibility to work smarter and align your needs and ours. People: Leidos empowers people from every background to be themselves and gives you the tools to learn new skills by enabling growth whilst developing . We believe that extraordinary people need opportunities to grow, to be inspired and to inspire others. At Leidos, we invest in technical academies, career rotations and a career development plans thatthat enhance your future. TPBN1_UKTJ

MULTI-SKILLED MAINTENANCE ENGINEER Job Title: Multi Skilled Maintenance Engineer Location: Credenhill, Hereford Salary: £ 40,000 - £45,000 Shift: Days and Nights Job Role of the Multi Skilled Maintenance Engineer A great opportunity has become available for a Multi-Skilled Maintenance Engineer to join a busy manufacturing site, working within a supportive engineering team. This role is suited to a proactive engineer who takes ownership and looks to stay ahead of issues rather than waiting for them to arise. You will carry out both electrical and mechanical maintenance, including fault finding, reactive repairs, and planned preventative maintenance to maximise reliability and minimise downtime. You'll also support continuous improvement, contribute to upgrades, and work closely with production to drive performance and safety standards. In return, you'll be joining a stable and well-invested business that values initiative, offering ongoing development and genuine opportunities for progression. Sector - Manufacturer Non-Negotiable Requirements of the Multi Skilled Maintenance Engineer • Worked in Manufacturing or Industrial Environment, • Hands on experience with pre-planned, reactive and breakdown maintenance

CDM Advisor £400-500 Per Day Hereford gap construction are working with a leading specialist contractor delivering the strip out of a large machine facility in Hereford. Due to continued project demands, they are seeking two experienced CDM Advisors to support the safe planning and delivery of these works, one working days and one working nights. This is an excellent opportunity to join a specialist project team on a significant industrial scheme, providing expert CDM support throughout the planning and delivery phases of the project. Performance Objectives Act as the project's CDM Advisor, ensuring compliance with CDM 2015 regulations throughout the strip out works. Support the client, principal contractor and wider project team in fulfilling their statutory duties. Review construction phase plans, risk assessments and method statements to ensure compliance and best practice. Conduct regular site inspections and audits, identifying potential risks and recommending corrective actions where required. Attend project meetings and provide expert guidance on health, safety and CDM related matters. Monitor contractor performance and ensure works are carried out safely and in accordance with agreed procedures. Assist with incident investigations and provide recommendations to prevent recurrence. Promote a positive safety culture across all levels of the project team. Ensure project documentation remains accurate, compliant and up to date throughout the duration of the works. Liaise effectively with day and night shift teams to ensure a consistent approach to safety and compliance across the project. Person Specification Proven experience working as a CDM Advisor on construction, demolition or industrial projects. Excellent understanding of CDM 2015 regulations and their practical application. NEBOSH Certificate or Diploma. Membership of IOSH, APS or a similar professional body would be advantageous. Strong communication and stakeholder management skills. Ability to engage confidently with clients, contractors and site teams. CSCS Card. Previous experience within manufacturing, industrial or heavy engineering environments would be beneficial. Must be willing to work either a day shift or night shift pattern. Two positions available: Day Shift CDM Advisor * Night Shift CDM Advisor Apply Please apply or call James at Gap Construction on 01223 375 629 if you would like any further information. This vacancy is being advertised on behalf of Gap Construction who are operating as an employment agency. Gap Construction are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the role. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. TPBN1_UKTJ

Tooling Engineer Are you an experienced Tool Maker looking for a varied, hands-on role within a growing technical manufacturing business? Yolk Recruitment is supporting a specialist plastic injection moulding manufacturer in the search for a Tool Maker to join their established Tool Room team. Supplying a diverse customer base across multiple sectors. This business operates a modern, fast-paced production environment where tooling performance is critical to quality, efficiency and customer delivery. This is an excellent opportunity for a skilled Tool Maker, Mould Toolmaker or Toolroom Engineer to play a key role in maintaining, repairing and improving a wide range of injection mould tools, while contributing to continuous improvement, new product introduction and manufacturing excellence. Key responsibilities: • Carry out preventative maintenance, servicing and repair of injection mould tools to ensure optimal performance and minimise downtime, • Diagnose and resolve tooling faults impacting production, quality, cycle times and overall manufacturing efficiency, • Support tool modifications, engineering changes and customer-driven improvement projects across a wide range of injection mould tools, • Operate toolroom machinery including CNC mills, lathes, grinders and manual toolmaking equipment to produce precision components, • Strip down, clean, assemble a...

Control Panel Builder (Electrical Assembly / OEM) £35,000 - £42,000 + Training + Progression + Bonus + Pension + Company Benefits Herefordshire Are you a Control Panel Builder, Panel Wireman, or Electrical Technician looking to join a well-established and growing engineering business that will provide ongoing training, progression opportunities, and long-term career development? This is a fantastic opportunity to join a respected specialist in the design and manufacture of electrical control panels for the process, water, and wastewater industries. With a strong pipeline of projects and ambitious growth plans, the company offers a stable and supportive environment where you can develop your technical skills and progress your career. In this role, you'll be building, wiring, and testing bespoke control panels and electrical systems to customer specifications and industry standards. You'll work closely with the design and engineering teams, supporting projects from assembly through to factory testing, with occasional opportunities to assist with commissioning activities. The ideal candidate will have experience building or wiring control panels, reading electrical schematics, and working within a manufacturing or engineering environment. The Role: • Building and wiring bespoke electrical control panels, • Reading and inter...

Project Engineer (Manufacturing) £40,000 - £50,000 + 2k Bonus + Flexitime + 33 Days Holiday + Private Healthcare + 5% Pension Hereford Are you a Project Engineer/Manager from a manufacturing background looking for an exciting new role you can truly mould into your own, within a long-standing and family-feel company, where you can influence change and take charge on large-scale production projects? In this role you will be liaising with customers on engineering changes and new product introductions, reviewing technical drawings and managing budgets and timescales within a busy production site. You will have some client visits, mostly around the local area but sometimes overseas. Established 30 years ago, this manufacturing company boasts a portfolio of over 1000 products being supplied into industries ranging from aerospace to medical. Supplying globally, they pride themselves on their expertise in their niche sector, with their high-quality being paramount to their success. This role would suit someone who has experience handling projects within a manufacturing environment, looking to drive success within a close-knit company who will look after them for their career. The Role: • Handling NPI and engineering change projects, • Involved in tooling changes and liaising with customers, • Ensuring projects are delivered on ...

Designer (Control Panels / Manufacturing) £45,000 - £50,000 + Training + Progression + Bonus + Enhanced Holidays + Company Benefits Herefordshire Are you a Design Engineer with Control Panel and EPLAN experience, looking to join a well-established and growing engineering business that will provide training, progression, and long-term career development? xrnqpay You will be responsible for designing electrical Find out more about the daily tasks, overall responsibilities, and required experience for this opportunity by scrolling down now. Please click on the apply button to read the full job description

Tooling Engineer Are you an experienced Tool Maker looking for a varied, hands-on role within a growing technical manufacturing business? Yolk Recruitment is supporting a specialist plastic injection moulding manufacturer in the search for a Tool Maker to join their established Tool Room team. Supplying a diverse customer base across multiple sectors. This business operates a modern, fast-paced production environment where tooling performance is critical to quality, efficiency and customer delivery. This is an excellent opportunity for a skilled Tool Maker, Mould Toolmaker or Toolroom Engineer to play a key role in maintaining, repairing and improving a wide range of injection mould tools, while contributing to continuous improvement, new product introduction and manufacturing excellence. Key responsibilities: Carry out preventative maintenance, servicing and repair of injection mould tools to ensure optimal performance and minimise downtime Diagnose and resolve tooling faults impacting production, quality, cycle times and overall manufacturing efficiency Support tool modifications, engineering changes and customer-driven improvement projects across a wide range of injection mould tools Operate toolroom machinery including CNC mills, lathes, grinders and manual toolmaking equipment to produce precision components Strip down, clean, assemble and test injection mould tools, ensuring correct electrical, hydraulic and pneumatic functionality before return to production Work closely with Production, Engineering, Technical and Quality teams to troubleshoot and resolve moulding and tooling issues Record all tooling activity accurately using ERP and quality management systems, ensuring compliance with ISO standards. This is what you'll need: Previous experience as a Tool Maker, Mould Toolmaker, Toolroom Engineer or similar role Strong understanding of plastic injection mould tools, maintenance and repair processes Experience operating CNC and manual toolroom machinery Strong fault-finding and problem-solving skills within a manufacturing or production environment And this is what you'll get: Competitive salary Early finish on Friday's Healthcare cash plan Company bonus TPBN1_UKTJ

Maintenance Engineer (Days / Nights) £45,000 - £55,000 + Life Assurance + Training + Progression Hereford Are you a Maintenance Engineer from a mechanical or electrical background looking to join one of the largest companies in the UK, offering a wide range of technical challenges and responsibilities and fully funded qualifications? In this role you will be performing planned and reactive maintenance on an array of production machinery and equipment within a busy food manufacturing site. You will be involved in conveyors, pneumatics, conveyors, along with installations and refurbishments. This company are market leading in their field, supplying their food products to countless restaurants and supermarkets across the UK. They pride themselves on their constant growth and dedication to being environmentally friendly. This role would suit a Maintenance Engineer looking to join a large, stable company who can further their career through funded qualifications and plenty of internal training. The Role Planned and reactive maintenance of machinery and equipment Working on conveyors, pneumatics, hydraulics, and PLCs, with training given Fully funded qualifications such as 18th Edition Rotating shifts, days and nights including weekends, averaging 42 hours per week The Person Maintenance Engineer Mechanical or Electrical background Reference Number: BBBH25835 Engineer, Mechanical, Electrical, Engineering, Maintenance, Manufacturing, Technician, Multi skilled, 18th, Production, FMCG, Machinery, Machines, Machine, Conveyors, Hereford, Ledbury, Leominster If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

When equipment stops, you're the person people want on shift. If you're the kind of engineer who can walk into a breakdown, get to the root cause quickly, and keep production moving, this role will feel right at home. Youwill be supporting planned maintenance, breakdown response, and overall equipment reliability in a fast-paced manufacturing environment where no two days are ever quite the same. About the Business This is a well-established, large-scale manufacturing operation with a strong focus on reliability, safety, and continuous improvement. The site operates high-volume production processes where engineering performance is critical to overall output. You'll be joining a stable, skilled maintenance team with a strong emphasis on teamwork, problem-solving, and keeping production running efficiently. Shift Pattern 3-shift rotating system: 6:00am – 2:00pm 2:00pm – 10:00pm 10:00pm – 6:00am Benefits Contributory pension scheme 25 days / 187.5 hours annual leave Site performance-based quarterly bonus (not guaranteed) Free parking Employee Assistance Programme Key Responsibilities Fault diagnosis on mechanical, electrical and hydraulic systems, responding quickly to breakdowns Carrying out planned preventative maintenance (PPM) to schedule Completing engineering maintenance tasks within assigned areas Updating CMMS records for breakdowns, downtime and maintenance history Ensuring effective shift handovers where applicable Maintaining safe working practices in line with 6S and risk assessments Supporting continuous improvement to reduce downtime and improve efficiency Supporting and developing apprentices within the team Ensuring plant and equipment is correctly serviced, maintained and calibrated Providing flexible support across departments when required About You Time-served apprenticeship in engineering or HNC (or equivalent) in maintenance/manufacturing engineering Strong fault-finding skills across mechanical and electrical systems Good communication skills at all levels Self-motivated, disciplined, and proactive approach Team-focused with a continuous improvement mindset Working Environment Plant-based role within a busy manufacturing environment focused on reliability, safety, and performance. Keen to know more? Click apply, or drop me a call on 01733391515 - Dan TPBN1_UKTJ

AutoCAD Designer (Control Panels / OEM) £45,000 - £50,000 + Training + Progression + Bonus + Enhanced Holidays + Company Benefits Herefordshire Are you a Design Engineer with Control Panel and EPLAN experience, looking to join a well-established and growing engineering business that will provide training, progression, and long-term career development? You will be responsible for designing electrical control panels to customer and industry standards, producing detailed documentation using EPLAN, and supporting projects from concept through to testing and commissioning. This is a varied role with both office-based design work and occasional site involvement. The company is a respected specialist in control panel design and manufacturing, with strong growth plans and a steady pipeline of projects. You will be part of a close-knit team, with opportunities to expand your technical skillset and progress your career. This role would suit an Electrical Design Engineer or Control Panel Designer who enjoys hands-on involvement, technical problem solving, and working on end-to-end engineering projects. The Role: • Design control panels in line with customer and industry standards, • Produce schematics and documentation using EPLAN, • Support testing, inspection, and commissioning activities, • Assist with Factory Acceptance Tes...

When equipment stops, you're the person people want on shift. If you're the kind of engineer who can walk into a breakdown, get to the root cause quickly, and keep production moving, this role will feel right at home. Youwill be supporting planned maintenance, breakdown response, and overall equipment reliability in a fast-paced manufacturing environment where no two days are ever quite the same. About the Business This is a well-established, large-scale manufacturing operation with a strong focus on reliability, safety, and continuous improvement. The site operates high-volume production processes where engineering performance is critical to overall output. You'll be joining a stable, skilled maintenance team with a strong emphasis on teamwork, problem-solving, and keeping production running efficiently. Shift Pattern 3-shift rotating system: • 6:00am – 2:00pm, • 2:00pm – 10:00pm, • 10:00pm – 6:00am Benefits • Contributory pension scheme, • 25 days / 187.5 hours annual leave, • Site performance-based quarterly bonus (not guaranteed), • Free parking, • Employee Assistance Programme Key Responsibilities • Fault diagnosis on mechanical, electrical and hydraulic systems, responding quickly to breakdowns

Control Panel Assembler (Electrical Assembly / OEM) £35,000 - £42,000 + Training + Progression + Bonus + Pension + Company Benefits Herefordshire Are you a Control Panel Builder, Panel Wireman, or Electrical Technician looking to join a well-established and growing engineering business that will provide ongoing training, progression opportunities, and long-term career development? This is a fantastic opportunity to join a respected specialist in the design and manufacture of electrical control panels for the process, water, and wastewater industries. With a strong pipeline of projects and ambitious growth plans, the company offers a stable and supportive environment where you can develop your technical skills and progress your career. In this role, you'll be building, wiring, and testing bespoke control panels and electrical systems to customer specifications and industry standards. You'll work closely with the design and engineering teams, supporting projects from assembly through to factory testing, with occasional opportunities to assist with commissioning activities. The ideal candidate will have experience building or wiring control panels, reading electrical schematics, and working within a manufacturing or engineering environment. The Role: • Building and wiring bespoke electrical control panels, • Reading and int...

Manufacturing Engineer – NPI Location: Hereford Salary: Up to £55,000 Are you a Manufacturing Engineer with experience in prototyping and new product introduction, looking to play a key role in bringing complex, high-power products into full-scale production? This is a unique opportunity to join an innovative engineering business working on advanced electronic systems, where you'll support both ongoing development and the transition into full NPI and production. The Role This is a hybrid Manufacturing Engineer / NPI position, focused on supporting the development and industrialisation of highly complex, high-power electronic products. You'll work closely with engineering and production teams to take evolving designs and turn them into robust, manufacturable products, playing a key role in scaling production capability. The position offers a clear pathway to develop into a dedicated NPI-focused role within 12–24 months. Key Responsibilities • Support the transition of products from prototype to production (NPI), • Convert incomplete or evolving designs into manufacturable, production-ready solutions, • Work closely with design engineers to refine and improve product performance, • Drive improvements around scalability, manufacturability, and efficiency, • Support production with technical input, proc...

Electrical Designer (Control Panels / Manufacturing) £45,000 - £50,000 + Training + Progression + Bonus + Enhanced Holidays + Company Benefits Herefordshire Are you a Design Engineer with Control Panel and EPLAN experience, looking to join a well-established and growing engineering business that will provide training, progression, and long-term career development? xrnqpay You will be responsible for designing Find out more about the daily tasks, overall responsibilities, and required experience for this opportunity by scrolling down now. Please click on the apply button to read the full job description

Job Overview: Working alongside our client, an established injection moulding manufacturer, we are looking for an Injection Moulding Setter to join their established team. Remit: • This position will suit a skilled Injection Moulding Setter with experience within setting, conditioning and process optimisation of injection moulding machines, • CandidatesMUST HAVE demonstrable experience within injection moulding manufacturing, • This is a fantastic opportunity for an experienced Injection Moulding Setter / Technician or Trainee Setter to join a forward-thinking company in a secure job role with opportunities for further training & development Company Benefits: • 25 days holiday+ bank holidays, • Company bonus, • Healthcare cash plan, • Overtime available at enhanced rates, • Opportunities for Training & development, • Relocation assistance Role: • In the role as Injection Moulding Setter you will be required to oversee the completion of all tool changes and start up procedures in line with tool change procedural documentation, setting machine parameters to the setting sheet, with sign off including the promotion of housekeeping standards. Submitting a first off as per the first off procedure, and related documentation, ensuring a right first time attitude; including restarts., • You will be working to the production priorities as set by the Production Supervisors to deliver the plan; prioritising workload as necessary and reporting back to the Production Supervisors and Technical Managers the output from each shift., • To prepare raw materials, mould mount applicable tools and set up processing equipment as efficiently as possible in order to deliver maximum overall equipment efficiency., • Undertaking tool changes, and second operation set ups and clean down as required throughout the shift, in line with costed timeframes., • To set and keep running production from moulding machines, robotics and ancillaries throughout shift, ensuring the remain within quality monitoring parameters., • Submit successful first offs first time, ensuring excellent housekeeping and by using visual checks to the golden sample, handheld measuring tools and shot weight before submission., • Problem solving quality and cycle time issues throughout the run., • Carrying out planned and reactive low level maintenance work in a safe and timely manner. Experience Requirements: • Industry recognised injection moulding qualifications, • Previous experience in an injection moulding environment., • Ability to read technical drawings and use measuring tools., • Strong numeracy skills., • Clear communication skills, both verbal and written., • Ability to thrive in a pressurised environment and meet deadlines., • Can-do attitude with the flexibility to adapt to changes Key Words: Mould Technician, Injection Moulding Technician, Mould Process Technician, Injection Moulding Setter, Injection Moulding, Plastics, Mould Setter FOOTER Due to the sheer volume of applications we receive we will only contact successful applications that meet the requirements of our client job brief. Therefore, if you have not heard from us within 10 working days, please deem your application as unsuccessful. For all UK job positions work seekers must be eligible to work and live in the UK Sierra 57 Consult Technical Engineering & Manufacturing Recruitment Specialist Plastics, Packaging & Precision Engineering Sierra 57 Consult Ltd are acting as an Employment Agency in relation to this vacancy. In compliance with the new regulations (April 2004) in place under the Employment Agencies Act, Sierra 57 Consult will require proof of identification. A current copy of a passport, driving license, ID card or NI card will be required as part of the registration process. Email copies are acceptable. Sierra 57 Consult has been designed to project manage the mechanics of all aspects concerning the recruitment processes, implementing a simple and succinct method for targeting and introducing bona fide and skilled candidates to reputable clients and potential employers. If this advertised position does not interest you, please consider our other opportunities by sending your updated CV outlining your achievements and your personal requisites, i.e. salary, location, job roles. Please just Google Sierra 57 & register with us. TPBN1_UKTJ

AutoCAD Designer (Control Panels / OEM) £45,000 - £50,000 + Training + Progression + Bonus + Enhanced Holidays + Company Benefits Herefordshire Are you a Design Engineer with Control Panel and EPLAN experience, looking to join a well-established and growing engineering business that will provide training, progression, and long-term career development? You will be responsible for designing electrical control panels to customer and industry standards, producing detailed documentation using EPLAN, and supporting projects from concept through to testing and commissioning. This is a varied role with both office-based design work and occasional site involvement. The company is a respected specialist in control panel design and manufacturing, with strong growth plans and a steady pipeline of projects. You will be part of a close-knit team, with opportunities to expand your technical skillset and progress your career. This role would suit an Electrical Design Engineer or Control Panel Designer who enjoys hands-on involvement, technical problem solving, and working on end-to-end engineering projects. The Role: Design control panels in line with customer and industry standards Produce schematics and documentation using EPLAN Support testing, inspection, and commissioning activities Assist with Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) Provide technical support across the wider business * Occasional UK travel and overnight stays The Person: Electrical Engineering qualification (Level 3 or above) Experience with EPLAN or similar CAD software Understanding of electrical systems, components, and circuits * Full UK driving licence If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH24533f Keywords: Control Panel Design Engineer, Electrical Design Engineer, EPLAN, Control Panels, MCC, Electrical Schematics, Panel Design, Automation, PLC, Wiring Diagrams, Electrical Systems, Process Engineering, Water Industry, Wastewater, FAT, SAT, Commissioning We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

MULTI-SKILLED MAINTENANCE ENGINEER Job Title: Multi Skilled Maintenance Engineer Location: Credenhill, Hereford Salary: £ 40,000 - £45,000 Shift: Days and Nights Job Role of the Multi Skilled Maintenance Engineer A great opportunity has become available for a Multi-Skilled Maintenance Engineer to join a busy manufacturing site, working within a supportive engineering team. This role is suited to a proactive engineer who takes ownership and looks to stay ahead of issues rather than waiting for them to arise. You will carry out both electrical and mechanical maintenance, including fault finding, reactive repairs, and planned preventative maintenance to maximise reliability and minimise downtime. You'll also support continuous improvement, contribute to upgrades, and work closely with production to drive performance and safety standards. In return, you'll be joining a stable and well-invested business that values initiative, offering ongoing development and genuine opportunities for progression. Sector - Manufacturer Non-Negotiable Requirements of the Multi Skilled Maintenance Engineer Worked in Manufacturing or Industrial Environment Hands on experience with pre-planned, reactive and breakdown maintenance Requirements for the Multi Skilled Maintenance Engineer Electrical and mechanical fault-finding experience. Engineering qualification (Electrical or Mechanical) Proactive with there maintenance approach Desirable Requirements for the Multi Skilled Maintenance Engineer Previous experience working as a Maintenance Engineer in the UK. Has worked with hydraulics, shafts, presses, valves, electric motors, sensors, drives. The Multi Skilled Maintenance Engineer will benefit from Working for a recognised market-leading business. Excellent benefits package including pension, onsite parking, Training and development opportunities for engineers. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Salma Mousrij at Pioneer Selection As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details

Electrical Design Engineer Herefordshire Up to £50,000 - DOE. Our client is a well-established engineering company that designs and manufactures electrical products for recycling and process sectors. Due to growth, they are seeking an Electrical Design Engineer to join their existing team. As an Electrical Design Engineer, you will manage electrical design projects from initial concept through to delivery, understand technical specifications and create detailed electrical designs using CAD software. Electrical Design Engineer Responsibilities: Manage electrical design projects from initial concept through to delivery. Create detailed electrical designs using CAD software. Test electrical designs to ensure that they meet clients’ expectations. Provide technical support to both clients and the wider engineering team. Electrical Design Engineer requirements: Electrical or equivalent engineering qualification. Experienced Design Engineers & Trainee Design Engineers will be considered. Must be able to create electrical designs using CAD software. Must be a team player. If you are interested in Electrical Design Engineering, please apply at your earliest convenience. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included

Injection Moulding Setter Hereford Up to £40,000 – Dependant on experience. Monday to Friday – 3 rotating shift patterns. Our client is a well-established manufacturer of custom plastic products. As an Injection Moulding Setter, you will be responsible for preparing materials, carry out tool changes and set & operate injection moulding machinery. Injection Moulding Setter Responsibilities: Preparing materials ahead of production Carry out injection moulding tool changes Set and operate injection moulding machinery throughout the shift Carry out all start up procedures for all machinery Quality check and ensure that products meet client specifications Clean and maintain equipment & production machinery Injection Moulding Setter Requirements: Previous experience working as an Injection Moulding Setter Must be able to work a rotational shift pattern Experienced in carrying out tool changes and start up procedures for all machinery Experienced in problem-solving related issues within production Must be a team player Must be able to work to engineering drawings. If you are interested in this Injection Moulding Setter position, please apply at your earliest convenience. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included

Maintenance Engineer (Days / Nights) £45,000 - £55,000 + Life Assurance + Training + Progression Hereford Are you a Maintenance Engineer from a mechanical or electrical background looking to join one of the largest companies in the UK, offering a wide range of technical challenges and responsibilities and fully funded qualifications? In this role you will be performing planned and reactive maintenance on an array of production machinery and equipment within a busy food manufacturing site. You will be involved in conveyors, pneumatics, conveyors, along with installations and refurbishments. This company are market leading in their field, supplying their food products to countless restaurants and supermarkets across the UK. They pride themselves on their constant growth and dedication to being environmentally friendly. This role would suit a Maintenance Engineer looking to join a large, stable company who can further their career through funded qualifications and plenty of internal training. The Role Planned and reactive maintenance of machinery and equipment Working on conveyors, pneumatics, hydraulics, and PLCs, with training given Fully funded qualifications such as 18th Edition Rotating shifts, days and nights including weekends, averaging 42 hours per weekThe Person Maintenance Engineer Mechanical or Electrical backgroundReference Number: BBBH25835 Engineer, Mechanical, Electrical, Engineering, Maintenance, Manufacturing, Technician, Multi skilled, 18th, Production, FMCG, Machinery, Machines, Machine, Conveyors, Hereford, Ledbury, Leominster If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Tool Maker £45,000 - £50,000 + Progression + Training + Bonus + Benefits + Overtime + Days based role + Early Finish Friday Hereford Commutable from Leominster, Ledbury, Ross-on-Wye, Monmouth, Malvern Are you a Tool Maker or similar looking to join a market leading company who can provide a yearly bonus, overtime and the chance to work on technically challenging projects including NPIs? On offer is the opportunity to join an established manufacturing company who are growing due to demand, they produce a wide range of products for industries such as Defence, Aerospace and consumer products. The role will involve a varied work week, working with the toolroom team you will be creating new tooling, modifying existing tooling, carrying out quality inspections, following maintenance schedules, helping with continuous improvement with the potential to progress into a senior Tool Maker. This role would suit a Tool Maker or similar who is looking to make an impact, working in a varied role taking charge for the production, modifying and maintenance for a variety of important projects including NPI. The Role Developing and modifying tooling Working on continuous improvement Maintaining all tooling Taking charge of NPIThe Person Tool Maker or similar Commutable to HerefordFor more information please click apply - REFERENCE 5164a elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Tool Maker | Mould Toolmaker | Mould Maker | Tooling Engineer | Machinist | Tooling | Die | Mould | NPI | Injection Moulding | Manufacturing | Engineering | Hereford | Leominster | Ledbury | Ross-on-Wye | Monmouth | Malvern INDMP

Toolmaker Hereford Up to £48,000 – Dependant on experience. Monday to Thursday – 07:30 – 16:00 & Friday 08:00 – 14:00. Our client is a well-established manufacturer of custom plastic products. As a Toolmaker, you will be responsible for creating, maintaining and repairing injection mould tools. Toolmaker Responsibilities: Create, repair and maintain injection mould tools Working to engineering and technical drawings Design and manufacture jigs & fixtures Manage tooling processes in line with industry & company standards Using bench hand tools and Tool Room machinery Toolmaker Requirements: Previous experience working in a Toolmaker or equivalent position Proven experience in setting and operating tool making machinery Knowledge of Injection Mould Tooling is essential Experienced in problem-solving tooling related issues within production Must be a team player Must be able to work to engineering drawings. If you are interested in this Toolmaker position, please apply at your earliest convenience. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included

Manufacturing Engineer – NPI Location: Hereford Salary: Up to £55,000 Are you a Manufacturing Engineer with experience in prototyping and new product introduction, looking to play a key role in bringing complex, high-power products into full-scale production? This is a unique opportunity to join an innovative engineering business working on advanced electronic systems, where you’ll support both ongoing development and the transition into full NPI and production. The Role This is a hybrid Manufacturing Engineer / NPI position, focused on supporting the development and industrialisation of highly complex, high-power electronic products. You’ll work closely with engineering and production teams to take evolving designs and turn them into robust, manufacturable products, playing a key role in scaling production capability. The position offers a clear pathway to develop into a dedicated NPI-focused role within 12–24 months. Key Responsibilities Support the transition of products from prototype to production (NPI) Convert incomplete or evolving designs into manufacturable, production-ready solutions Work closely with design engineers to refine and improve product performance Drive improvements around scalability, manufacturability, and efficiency Support production with technical input, process development, and problem solving Assist in developing build processes, documentation, and work instructions Contribute to ongoing product development, including performance and design optimisation What We’re Looking For Experience as a Manufacturing Engineer within a prototyping or low-volume environment Strong understanding of NPI processes and product industrialisation Experience working with complex electronic or electromechanical products Ability to work with evolving designs and bring structure to development projects Hands-on, proactive mindset with strong problem-solving ability Strong communication skills and ability to work cross-functionally Desirable Experience Experience with high power electronics or amplifiers Interest or exposure to RF technologies Background in start-up or fast-paced development environments Experience supporting scaling of products into production Why Apply? Hybrid working offering flexibility between home and site Opportunity to work on cutting-edge, high-power technologies Play a key role in developing and scaling new products Clear progression into a long-term NPI-focused position Be part of a growing engineering function with strong future potential To Apply For more information or to apply, please contact: Lewis Phillips (phone number removed) (url removed)

Stores Person - Manufacturing £29,000 - £30,000 + Progression + Training + Bonus + Benefits + Weekly Pay Hereford Commutable from Leominster, Ledbury, Ross-on-Wye, Monmouth, Malvern Do you have a Stores / Materials / Warehousing background within an engineering or manufacturing environment? Are you looking to join a market leading company who can provide you with industry training and put you on a progression path towards becoming an engineer? On offer is the opportunity to join an established manufacturing company who produce a wide range of products for industries such as Defence, Aerospace and consumer products. This role will involve coordinating of materials used in the manufacturing process, ensuring that they get from the warehouse to the shop floor, are available for processing and all tracked through internal systems. You will also be carrying out general warehouse responsibilities. This role would suit a person with a background in Stores / Materials / Warehousing within an engineering or manufacturing environment looking to join a business that can provide a varied role with training and options to progress into an engineering role. The Role Keeping track of all materials Ensuring materials are available Assisting with engineering tasks Keping the stores room clean 3 Week rotating shift pattern Week 1 9:45pm - 6am Week 2 1:45pm - 10pm Week 3 5:45am - 2pmThe Person Stores / Materials / Warehousing background Worked in an engineering or manufacturing environment Commutable to HerefordFor more information please click apply - REFERENCE 5163a elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Stores Person | Stock Controller | Materials Coordinator | Tool Hanger | Warehouse | Inventory | Tooling | Moulds | Plastics | Hereford | Leominster | Ledbury | Ross-on-Wye | Monmouth | Malvern INDLP

Control Panel Builder (Electrical Assembly / OEM) £35,000 - £42,000 + Training + Progression + Bonus + Pension + Company Benefits Herefordshire Are you a Control Panel Builder, Panel Wireman, or Electrical Technician looking to join a well-established and growing engineering business that will provide ongoing training, progression opportunities, and long-term career development? This is a fantastic opportunity to join a respected specialist in the design and manufacture of electrical control panels for the process, water, and wastewater industries. With a strong pipeline of projects and ambitious growth plans, the company offers a stable and supportive environment where you can develop your technical skills and progress your career. In this role, you'll be building, wiring, and testing bespoke control panels and electrical systems to customer specifications and industry standards. You'll work closely with the design and engineering teams, supporting projects from assembly through to factory testing, with occasional opportunities to assist with commissioning activities. The ideal candidate will have experience building or wiring control panels, reading electrical schematics, and working within a manufacturing or engineering environment. The Role: Building and wiring bespoke electrical control panels Reading and interpreting electrical schematics and drawings Testing and fault-finding electrical assemblies Supporting FAT testing and commissioning activities Working within a specialist control panel manufacturing environment The Person: Experience building or wiring control panels Able to read electrical schematics and technical drawings Electrical engineering or panel wiring background If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH25715 Keywords: Control Panel Builder, Panel Wireman, Electrical Technician, Electrical Fitter, Control Panels, Electrical Assembly, Panel Wiring, Electrical Engineer, Manufacturing, Automation, PLC Panels, Switchgear, Water Industry, Wastewater, Process Engineering, Herefordshire Jobs We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Mechanical Design Engineer Aerospace Hereford A Mechanical Design Engineer is required to join an engineering team who are working on the design and development of UAV / Drone launch systems, Graduate Design Engineers can be considered for this opportunity. The company design and develop their products in the UK for the global markets. With a growing order book, they are seeking to grow their engineering team and require Mechanical Design Engineers to join their highly innovative and forward-thinking team. The Mechanical Design Engineer will use CAD (ideally SolidWorks) to design and detail component and assembly models and the associated drawings. A hands-on approach and can-do attitude are essential, as is the ability to work independently within a small engineering team. What's in it for you? An excellent opportunity to work on highly innovative projects using your skills and experience to deliver high quality products to the global market Exciting opportunity to work for a pioneering British company that is at the forefront of innovation being recognised as a fast-growing organisation Work within a smaller engineering team where outstanding performance is recognised and rewarded where an individual can realise their designs from concept into a practical function product / system. Highly competitive salary As Mechanical Design Engineer - you will be required to; Develop mechanical design schemes and detailed designs of UAV / drone launch system parts and assemblies and it's associated launch mechanism. Use hand calculations, simulation methods, modelling tools and CAE tools to size, analyse and optimise system elements. Carry out concept design of mechanical systems using CAD Support in-house prototype build. As Mechanical Design Engineer - you will have; Degree in Engineering Proficiency in modelling parts & assemblies in CAD (ideally SolidWorks) Ability to carry out engineering calculations and the use of modelling and simulations software to support your design work. (Mathcad, ANSYS or similar) Ability to develop mechanical systems from concept to reality Knowledge of DFM, DFMEA Knowledge of pneumatics or hydraulics would be beneficial though not essential Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included

CDM Advisor £(Apply online only) Per Day Hereford gap construction are working with a leading specialist contractor delivering the strip out of a large machine facility in Hereford. Due to continued project demands, they are seeking two experienced CDM Advisors to support the safe planning and delivery of these works, one working days and one working nights. This is an excellent opportunity to join a specialist project team on a significant industrial scheme, providing expert CDM support throughout the planning and delivery phases of the project. Performance Objectives Act as the project's CDM Advisor, ensuring compliance with CDM 2015 regulations throughout the strip out works. Support the client, principal contractor and wider project team in fulfilling their statutory duties. Review construction phase plans, risk assessments and method statements to ensure compliance and best practice. Conduct regular site inspections and audits, identifying potential risks and recommending corrective actions where required. Attend project meetings and provide expert guidance on health, safety and CDM related matters. Monitor contractor performance and ensure works are carried out safely and in accordance with agreed procedures. Assist with incident investigations and provide recommendations to prevent recurrence. Promote a positive safety culture across all levels of the project team. Ensure project documentation remains accurate, compliant and up to date throughout the duration of the works. * Liaise effectively with day and night shift teams to ensure a consistent approach to safety and compliance across the project.Person Specification Proven experience working as a CDM Advisor on construction, demolition or industrial projects. Excellent understanding of CDM 2015 regulations and their practical application. NEBOSH Certificate or Diploma. Membership of IOSH, APS or a similar professional body would be advantageous. Strong communication and stakeholder management skills. Ability to engage confidently with clients, contractors and site teams. CSCS Card. Previous experience within manufacturing, industrial or heavy engineering environments would be beneficial. Must be willing to work either a day shift or night shift pattern.Two positions available: Day Shift CDM Advisor Night Shift CDM Advisor Apply Please apply or call James at Gap Construction on (phone number removed) if you would like any further information. This vacancy is being advertised on behalf of Gap Construction who are operating as an employment agency. Gap Construction are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the role. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy

YT Tech is recruiting for a well known security technology firm in Malvern. We are looking for an Electronics Engineer with 2+ years of commercial experience to join a multidisciplinary R&D team building life-saving detection products. This would be a great "second job" for engineers looking to continue their career. This is a hands-on role where you will take designs from initial schematic capture right through to production. The Role Design: Full PCB layout and schematic capture using Altium Designer. Analogue: Design and simulation of amplifiers, filters, and signal conditioning. Lab Work: Hands-on hardware bring-up, debugging, and circuit testing. Collaboration: Liaising with in-house manufacturing and senior software/physics teams. Requirements A strong degree (1st/2:1) in Electronics Engineering from a top-tier university. Approx. 2 years of post-grad commercial experience (not looking for fresh grads or PhDs). Proven experience with Altium and analogue circuit design. Knowledge of physical layer protocols (CAN, I2C, SPI). Why Apply? Impact: Work on purposeful technology used in healthcare and high-security sectors. Growth: Direct mentorship from senior engineers with a clear path to leadership. Stability: Join a scaling team in a business with its own UK manufacturing site. Please note: Applicants must have the permanent right to work in the UK (No visa sponsorship available)

Position: Business Development Manager Location: Hereford (20% home / 70% travelling / 10% Hereford) Salary: £55,000 – £65,000 + Bonus + Company Car + Pension etc If there’s something stopping you from achieving all you’re capable of, you’ll relish a role with a company that will positively encourage you to be proactive — a genuine opportunity to make an impact and help drive business growth. Our client is an established and highly respected manufacturer supplying precision-engineered solutions into demanding industrial sectors. Due to continued growth and ambitious future plans, they are now seeking a commercially driven Business Development Manager to join their team. This is an excellent opportunity for a motivated sales professional who enjoys developing new business, building long-term relationships, and operating within a technical manufacturing environment. The Role You will be responsible for identifying and securing new business opportunities while also developing key existing customer relationships across a range of industrial markets. The role will involve significant customer interaction and travel, making it ideal for a proactive and personable individual who thrives in a customer-facing environment. Key Responsibilities Identify and develop new business opportunities across target markets Build strong long-term relationships with both new and existing customers Prepare quotations, negotiate pricing, and secure commercial agreements Lead negotiations and close high-value opportunities Develop and implement sales strategies to support company growth Work closely with internal teams to ensure excellent customer delivery and support Interpret technical drawings and specifications where required Represent the business professionally at customer meetings and industry events Skills & Experience Required Proven experience within Business Development / Technical Sales Background within manufacturing, engineering, plastics, rubber, industrial products, or related sectors Strong commercial awareness and negotiation skills Excellent communication and relationship-building ability Ability to understand technical drawings and specifications Proficient with Microsoft Office and CRM systems This is a fantastic opportunity for an ambitious Business Development professional seeking a role where they can genuinely influence growth and become a key part of a successful business. The successful candidate will enjoy a salary of £55,000 to £65,000 plus excellent prospects, an employment package that you would expect from a company that values its employees. Do you have the courage to take on this challenge?

Assembly & Test Engineer / Technician UAV Components / Aerospace Engineering / Manufacturing Competitive Salary plus benefits Our client a UK-based engineering company specialising in the design, manufacture, and supply of high-performance components for unmanned aerial vehicles (UAVs). Working at the forefront of aerospace innovation, they support a range of commercial and specialist UAV programmes with precision-engineered solutions. Due to continued development of their products and demand they are now looking for a skilled and practical Assembly & Test Engineer / Technician to join their growing team. This is a genuinely hands-on engineering role suited to someone who enjoys working at the bench, building, testing, fault-finding, and improving precision assemblies in a fast-paced technical environment. The Role As a Assembly & Test Engineer / Technician, you will play a key role in the assembly, inspection, and functional testing of UAV components and sub-assemblies. You’ll work closely with engineers and production staff to ensure products meet exacting quality and performance standards. The Assembly & Test Engineer / Technician will be responsible for: Assemble of components and sub-assemblies using engineering drawings and work instructions Carry out functional basic testing and record accurate test data Diagnose faults and support root-cause investigations on failed assemblies Work collaboratively with engineering teams to support product improvements and development Maintain component traceability and production documentation Follow quality, safety, and ESD procedures at all times Assist with inspection and preparation of components for delivery The Assembly & Test Engineer / Technician will have: Proven hands-on mechanical assembly experience within an engineering or manufacturing environment Ability to read and interpret engineering drawings and technical documentation Strong practical assembly, strip down and build, fault-finding and testing skills Excellent attention to detail and quality standards Good communication and documentation skills Ideally the Assembly & Test Engineer / Technician will possess: Experience in manufacturing and production environment with a focus on assembly and build processes Mechanical, Electromechanical and/or electronics being adept at stripping down and building complex systems and/or products Familiarity with ISO 9001 or similar quality systems ONC/HNC/HND or equivalent engineering qualification or apprenticeship would be advantageous What They Offer: Competitive salary depending on experience Permanent, full-time position Opportunity to work on innovative UAV technologies Engineering-led, collaborative working environment Exposure to a wide range of advanced aerospace components and systems Ongoing opportunity to develop technical skills and experience Important Note: This role is heavily hands-on and workshop-based. We are specifically looking for candidates who are comfortable working directly with components, assemblies, and testing equipment on a daily basis. Candidates from adjacent industries with strong practical engineering backgrounds are encouraged to apply. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included

Technical Network has been retained by an large manufacturer to recruit a couple of experienced Production Managers to work on a continental shift pattern. Responsible for one of their key production areas this role provides a brilliant opportunity for a resilient and driven individual to make their mark on a growing UK business. Shift Production Manager Salary: £(phone number removed) + benefits Location: Herefordshire o Management of a high volume complex manufacturing process overseeing day-to-day operations against H&S QCD performance metrics o Develop and grow your direct reports and the team around you to build a positive and nurturing environment. o Implementation and review of Standard Operating Procedures/KPIs across your department o Manage and mentor a diverse team, fostering engagement and professional growth. o Driving a strong culture of Health & Safety on site. o Leading and driving Continuous Improvement activities Experience required: You will already be an experienced Production Manager or Production Supervisor or Shift Manager working within fast paced volume manufacturing environment and seeking your next career step with an expanding and successful organisation. o Experience of leading teams in a high volume/ large batch production pressurised manufacturing environment o Experience of coaching and mentoring an already strong team o Able to plan and organise manning, materials and production in a busy environment along with excellent management, prioritisation and organisational skills o Assertive, independent and self sufficient with the ability to cope effectively under pressure and to meet deadlines o Ability to drive performance against KPI's o Management or supervisory qualifications ; ILM, NVQ4, HNC, Degree, IOSH o Time served / BTEC Mechanical Engineering and lean/ sigma training highly desirable The opportunity: This is an excellent opportunity for an experienced manufacturing professional with leadership experience to be part of an expanding organisation with continued investment strategy. Above all this is an opportunity to make a real contribution to the success and growth of business and become an instrumental part of the senior management team. Apply on-line or call Robert Wigley for a confidential discussion (url removed) Technical Network Recruitment – Search & Selection for mid to senior level appointments for engineering & manufacturing sectors- automotive, aerospace, defence, advanced materials, capital equipment & automation

Are you an experienced Mechanical Engineer with experience and knoweldge of repairing pumps and motors looking for a new opportunity. Our client is a leading manufacturer in Hereford looking to add the skills and experience of a maintenance Engineer to join their Engineering team. Ideally you will have experience working within a Manufacturing or facilities environment conducting pre-planned and reactive maintenance to Production Equipment. Main duties: · Conducting routine inspections of equipment. · Performing Preventative maintenance. · Diagnosing Mechanical issues and correcting them. · Ensure quick reaction to any breakdowns that occur. · Maintain key spares for equipment and spare items of equipment. · Carry out Mechanical installations. · General repair and upkeep of the building infrastructure. · Maintain accurate records. · Schedule PPM and repairs for equipment. This is a permanent opportunity based in Hereford, Double day shift pattern Monday to Friday no weekends (Apply online only) / (Apply online only) Enhanced Benefits package. Please apply today if you are interested in discussing this opportunity in more detail and I will be in touch R42 About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies

Project Engineer (Manufacturing) £40,000 - £50,000 + 2k Bonus + Flexitime + 33 Days Holiday + Private Healthcare + 5% Pension Hereford Are you a Project Engineer/Manager from a manufacturing background looking for an exciting new role you can truly mould into your own, within a long-standing and family-feel company, where you can influence change and take charge on large-scale production projects? In this role you will be liaising with customers on engineering changes and new product introductions, reviewing technical drawings and managing budgets and timescales within a busy production site. You will have some client visits, mostly around the local area but sometimes overseas. Established 30 years ago, this manufacturing company boasts a portfolio of over 1000 products being supplied into industries ranging from aerospace to medical. Supplying globally, they pride themselves on their expertise in their niche sector, with their high-quality being paramount to their success. This role would suit someone who has experience handling projects within a manufacturing environment, looking to drive success within a close-knit company who will look after them for their career. The Role: Handling NPI and engineering change projects Involved in tooling changes and liaising with customers Ensuring projects are delivered on time and within budget Occasional site visits across the UK and sometimes overseas Monday to Friday, 37.5 hours a week, flexi-timeThe Person: Project Engineer / Manager Manufacturing background Reference: BBBH24283a Engineer, Manager, Senior, Manufacturing, Mechanical, Plastics, Metals, Production, Project, NPI, Change, Plastic, Tool, Tooling, Hereford, Worcester, Ledbury, Leominster, Herefordshire If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Site Engineering Manager Location: Herefordshire Salary: £60,000 – £65,000 + Package Moorland Recruitment are currently supporting a leading FMCG manufacturer in Herefordshire with the appointment of a Site Engineering Manager. This is a key leadership role for the site, responsible for leading the engineering function across a fast-paced, high-volume manufacturing environment. The successful candidate will take ownership of maintenance, reliability, engineering compliance, continuous improvement and team performance. The business is looking for a strong engineering leader who can bring structure, accountability and pace to the department, while working closely with Production, Operations, Technical and H&S teams to improve overall site performance. The Role Lead the engineering team day-to-day, while also driving longer-term improvements across PPM systems, breakdown analysis, engineering standards, compliance and capital projects. Key Responsibilities • Lead, manage and develop the site engineering team across a busy FMCG manufacturing facility., • Take ownership of planned maintenance, reactive maintenance and engineering performance., • Improve machine reliability, reduce downtime and support improvements in OEE., • Review and develop PPM schedules, maintenance systems and engineering processes., • Manage engineering compliance, including PUWER, LOLER, contractor control, statutory inspections and site safety standards., • Work closely with Production and Operations to support output, efficiency and labour utilisation., • Manage engineering budgets, contractors, suppliers and critical spares., • Support capital projects, equipment upgrades, site improvements and continuous improvement initiatives., • Build a proactive, accountable and performance-led engineering culture on site. The Candidate The successful candidate will be an experienced Engineering Manager, Maintenance Manager or Senior Engineering Leader from a FMCG, food, drink, packaging, process or high-volume manufacturing environment. This is an Opportunity to implement strategy, further structure and be part of a growing and exciting business. Thanks The Moorland Team