Trabajos metal work en BristolCrear alertas

We are recruiting for a Planned Service Engineer to join an established engineering service team supporting customers across the sheet metal machinery industry. This role will cover Bristol and the M5. This is an excellent opportunity for an electrically and mechanically skilled engineer to undertake planned maintenance, fault-finding and breakdown repairs on industrial machine tools. You will work directly with customers, providing technical support, training and servicing to ensure machinery operates safely and efficiently. The role will suit an enthusiastic, self-motivated engineer who enjoys problem-solving, customer interaction and working independently in a field-based position. Full training will be provided through a structured programme combining in-house and field-based learning. Key Responsibilities Diagnose and rectify machinery faults, breakdowns and operational issues. Carry out routine servicing and planned maintenance of machines and associated equipment. Provide customers with training on machinery operation, maintenance and safety procedures. Interpret electrical, electronic, hydraulic and mechanical drawings and systems. Undertake electrical fault-finding, including reading and understanding electrical schematics. Apply PLC and mechanical engineering knowledge to diagnose and resolve technical problems. Identify opportunities to promote consumables, maintenance contracts and additional machinery-related products. Deliver excellent customer service while maintaining high professional standards. Manage workloads effectively while travelling between customer sites across the region. Skills & Experience Required A suitable engineering qualification, ideally HNC or degree level, or an equivalent engineering apprenticeship. Previous field service experience with machine tools would be advantageous. Good electrical engineering knowledge, including fault-finding and schematic interpretation. Understanding of mechanical, hydraulic and electronic systems. PLC knowledge and practical mechanical engineering skills. Ability to work independently, manage pressure and resolve technical issues efficiently. Excellent communication skills, with the confidence to liaise professionally with customers at all levels. A flexible approach to working hours and travel. A self-motivated attitude, with a strong focus on customer satisfaction and service quality. Professional presentation and a commitment to maintaining high standards. Salary & Benefits Competitive salary plus performance-related bonus, depending on experience. Company vehicle. Private healthcare. Pension contribution. 25 days' annual leave plus bank holidays. Excellent expenses package. Full tooling, laptop, tablet and mobile phone provided. Company uniform provided. Structured training and ongoing technical development

Field Service Engineers – Industrial Bakery Manufacturing Location UK wide can be based anywhere with reasonable motorway links Midlands, East Midlands, Yorkshire, South East, South West, Birmingham, Warrington, Manchester, Leeds, Coventry, Oxford, Leicester, Sheffield, Peterborough, Northampton, Essex, Bristol, M1 Salary circa £45,000 – 60,0000 basic + car / van / allowance + overtime + private health care + 10 - 15% bonus + pension + 33 days holiday + training + credit card, fuel card, expenses, allowances Hours Monday to Friday (weekend work / overtime available if desired) Exciting opportunities have arisen to join market leaders enjoying year on year growth. As well as training and a friendly culture you will have clear structured opportunities for progression and advancement – team leader, manager, technical specialist etc. The Job: Varied work including service, maintenance, installations, upgrades and occasional breakdowns for packaging machinery. Read mechanical and electrical drawings / schematics, fault finding, diagnostics, repair, installations. Educate customers on use and maintenance. Working on industrial bakery machinery. The Person: Multiskilled maintenance or service experience. Experience in industrial bakery sector. Flexible to travel and stay away from home – depending on where you live this may be a few nights per month on average. Health & safety and hygiene focused, friendly, proactive, good communication, desire to learn and improve. * Machinery experience may include conveyors, dosing equipment, spiral mixers, high speed mixers, dough processing , dividers, moulders, provers, depositors, tunnel ovens, rack ovens, spiral conveyors, coolers, slicers, checkweighers, scanners, autoloaders, metal detectors, X-ray inspection, pack validation vision systems, sealing machinery, seal integrity systems, automated boxing and sleeving systems, labellers, palletisers, end of line inspection and automation systems. To apply please send CV to Tim Fawcett or call the Control Recruitment Solutions office. Field service engineer; field service technician, maintenance technician, shift engineer, shift technician, regional service engineer, rck oven, tunnel oven, deck oven, regional field service engineer, regional field service technician, regional service technician field service technician; field service engineer; mechanical engineering; electrical engineering; food; servo drives, schematics, impellers, pumps, conveyors, Micro processor, temperature control; dehumidifier; dryer, hmi; hydraulics, pneumatics, servo drives, motors, filling, bottling , palletizer, labelling, recycling, refrigeration, multiskilled, tray sealing, conveyors, dosing equipment, spiral mixers, high speed mixers, dough processing , dividers, moulders, provers, depositors, tunnel ovens, rack ovens, spiral conveyors, coolers, slicers, checkweighers, scanners, autoloaders, metal detectors, X-ray inspection, pack validation vision systems, sealing machinery, seal integrity systems, automated boxing and sleeving systems, labellers, palletisers, end of line inspection ; materials handling; Mechanical; Maintenance; Manufacturing automatic, mod; service engineer; maintenance; maintenance engineer; repair; fault finding; compressor; refrigeration plant; pharmaceutical; medical; navy; marine; marine engineer; hnc; hnd; higher national; marine engineer; Mechatronics; Marine Engineering

Senior Battery Design Engineer ARCA is supporting an aerospace programme to bring in an experienced Battery Design Engineer on a contract basis. This is a hands-on role within the Battery team, focused on detailed mechanical design and design ownership across high-performance battery pack assemblies. The work: Detailed mechanical design and development of battery pack assemblies Design of housings, enclosures and internal battery components Injection-moulded components, sheet metal, cast parts and sealing Packaging and integration of HV components Designing with consideration for creepage & clearance, busbars and electrical bolted joints Supporting designs from concept through to manufacture and assembly Working closely with electrical, manufacturing, analysis and wider engineering teams What they’re looking for: Strong mechanical / product design experience within battery, EV, automotive, aerospace or another complex engineering environment Hands-on detail design and design ownership experience Experience with injection moulding, sheet metal, cast components and sealing Good understanding of HV electrical considerations within mechanical design Experience designing smaller-scale assemblies for manufacture CATIA / 3DEXPERIENCE experience preferred Details: Contract: 3 months initially – Outside IR35 * Location: Bristol – 2 days onsite per week If you would like to know more about this Battery Design Engineer opportunity, please apply for immediate consideration

Job Title: Senior Embedded Software Engineer Location: Bristol (3 Days On-Site Per Week) Salary: £60,000 - £70,000 + Bonus & Benefits (Depending on Experience) NOTE: Only candidates with permanent, unrestricted UK working rights will be considered, as visa sponsorship is not offered for this position. Overview: This is an exciting opportunity for an experienced Embedded Software Engineer to join a collaborative and innovative engineering environment with a business at the beginning of the development journey for their next-generation product. The successful candidate will work closely with Senior Engineers and other members of the engineering team, taking a key role in designing and developing embedded firmware in C for bare-metal applications. This is an excellent opportunity for an engineer looking to take on greater technical responsibility and contribute to the development of innovative, high-technology products from an early stage. Job Responsibilities: Design, develop, and maintain firmware in C to support product enhancements and new product development. Take ownership of embedded software development activities across the product lifecycle. Develop firmware for bare-metal embedded applications. Lead and support the testing, debugging, and integration of embedded solutions. Work closely with Senior Engineers and wider engineering teams to develop robust and reliable embedded products. Follow structured development processes and contribute to code reviews and software quality improvements. Use source code control systems such as Git to manage code versions and development activities. Use task tracking systems such as Jira to record issues, manage development tasks, and support project coordination. Provide technical input into software architecture, design decisions, and development methodologies. Support the mentoring and development of less experienced engineers where appropriate. Experience Required: Strong experience in C programming for bare-metal embedded systems. Experience with communication protocols such as SPI, RS485, and CAN. Strong knowledge of ARM architectures, such as Cortex-M or Cortex-A. Experience developing, debugging, and integrating embedded firmware. Good understanding of embedded software development processes and best practices. Experience using source control systems such as Git. Experience working with task tracking and project management tools such as Jira. Strong problem-solving skills and a methodical approach to software development. Enthusiasm for low-level development and a passion for understanding how hardware and software interact

An established and growing engineering and manufacturing business in the Bristol area is looking to recruit an experienced Welder to join its skilled workshop team. This is a hands-on position working on a variety of sheet metal fabrication projects, supporting the production of high-quality fabricated components and assemblies. This role would suit a Welder with strong MIG welding and fabrication experience who enjoys working from engineering drawings and taking projects through the full fabrication process. Key Responsibilities MIG welding sheet metal and steel sections. Measuring, cutting, folding, fitting, and fabricating metal components. Fabrication of sheet steel and sections ranging from 1mm to 10mm thickness. Operating fabrication machinery including guillotines and press brakes. Carrying out manual cutting using plasma and flame-cutting methods. Modifying, repairing, and fabricating replacement metal components when required. Using a variety of handheld and powered tools to complete fabrication activities. Ensuring all work is completed to high quality and safety standards. Skills & Experience Required Previous experience in a Welder or Fabricator Welder position. Strong sheet metal fabrication experience. Proven MIG welding skills. Ability to accurately read measurements and work to specifications. Good attention to detail and commitment to quality. Strong communication skills and the ability to work effectively within a team. General engineering or manufacturing background. CNC machine operation experience would be advantageous. Benefits Excellent earning potential with bonus opportunities. Ongoing training and career development. Company pension scheme. Buy and sell holiday scheme. Private medical scheme. Life assurance and wellbeing support. 23 days holiday plus bank holidays, increasing with service. Stable, long-term opportunity with a growing engineering business. Apply Now If you are an experienced Welder looking to join a successful manufacturing and engineering environment with excellent long-term prospects, we'd be keen to hear from you. Submit your CV today for immediate consideration

EXPERIENCED PANEL BEATER Location: Bristol Salary: Up to £48,000 Depending on Experience Job Type: Full-Time, Permanent Hours: Monday - Friday - 08:00 - 17:00 Looking for a role where your Panel Beater skills are recognised, your earning potential is rewarded, and your career can continue to progress? If you're an experienced Panel Beater looking for your next move, this is an excellent opportunity to join a professional accident repair centre where technical ability, quality workmanship and experience are genuinely valued. Offering a salary of up to £48,000 depending on experience, you'll benefit from a consistent Monday to Friday working pattern with no weekend commitments. You'll work within a modern, well-equipped bodyshop alongside a skilled team, giving you the opportunity to use your expertise, develop your career and build a stable, long-term future within a professional accident repair environment. WHAT'S IN IT FOR YOU? ·Competitive Salary - Up to £48,000 DOE ·Monday to Friday Working Pattern ·08:00am - 5:00pm Working Hours ·Full-Time, Permanent Position ·40-Hour Working Week ·Modern Workshop Environment ·Ongoing Training & Development ·Career Progression Opportunities THE ROLE As an Experienced Panel Beater, you will be responsible for repairing and restoring accident-damaged vehicles to a consistently high standard. You'll work closely with the wider accident repair team to ensure vehicles are repaired safely, efficiently and in line with manufacturer repair methods and professional bodyshop quality standards. Key Responsibilities: ·Carry out minor and major panel repairs and replacement work on accident-damaged vehicles ·Complete structural repairs, panel alignment, welding and metal finishing where required ·Assess vehicle damage and select appropriate repair methods and techniques ·Carry out repairs in accordance with manufacturer specifications and approved repair procedures ·Work closely with MET Technicians, Paint Technicians, Estimators and Workshop Controllers ·Identify additional damage and communicate requirements to relevant team members ·Complete repairs within agreed production times while maintaining excellent workmanship ·Follow bodyshop quality standards, Health & Safety procedures and safe working practices ABOUT YOU We're looking for an experienced and quality-focused Panel Beater who takes pride in producing high-quality repairs and consistently delivering first-class workmanship. ·Proven experience as a Panel Beater, Panel Technician or Vehicle Body Repair Technician within an accident repair centre or bodyshop ·Strong knowledge of modern vehicle construction and accident repair methods ·Experience carrying out panel repairs, replacement, alignment and structural repairs ·Strong welding, metal finishing and associated body repair skills ·Ability to assess vehicle damage and determine appropriate repair methods ·Strong attention to detail with a commitment to quality and vehicle safety ·Ability to work efficiently to deadlines, production targets and agreed repair times ·Strong team player with a professional and positive attitude ·IMI and/or ATA qualifications advantageous but not essential ·Full UK Driving Licence preferred Alternative Job Titles: Panel Beater / Panel Technician / Vehicle Panel Technician / Automotive Panel Beater / Accident Repair Technician / Vehicle Body Repair Technician / Bodyshop Technician / Senior Panel Technician / Multi-Skilled Panel Technician / Automotive Body Repair Technician APPLY TODAY This is an excellent opportunity to join a professional accident repair business that values its employees, offers genuine career progression and provides long-term stability within a modern working environment. If you're an experienced Panel Beater looking for a role where your technical skills, experience and workmanship will be recognised and rewarded, we'd love to hear from you. Apply now for immediate consideration. Contact Steve @ AutoSkills UK - Job Reference - 54990

CNC Team Leader - North Somerset £38,000 – £44,000 DOE | Full-Time Abatec Recruitment is recruiting for an experienced CNC Team Leader to join a well-established manufacturing business in North Somerset. This is a hands-on leadership role, ideal for an experienced CNC Setter, CNC Machinist or CNC Supervisor looking to lead a team while remaining involved in daily production. What's in it for you? Salary of £38,000 – £44,000 per annum DOE. Full-time, temp-to-perm opportunity. Opportunity to lead and develop CNC Operators. Work with 3, 4 and 5-axis CNC machinery. Long-term career opportunities. Key responsibilities: Lead and support a team of CNC Operators to meet production targets. Set, operate and troubleshoot CNC machinery. Work with Siemens and Fanuc controls and CAD/CAM systems. Train and develop operators, providing technical support. Oversee metal machining and window and door fabrication. Maintain quality standards, production efficiency and Health & Safety procedures. What we're looking for: Extensive CNC setting and operating experience – essential. Previous CNC leadership or supervisory experience. Experience with 3, 4 and 5-axis CNC machinery. Knowledge of Siemens, Fanuc and CAD/CAM systems. Experience in metal machining and window and door fabrication. Ability to read engineering drawings and solve technical issues. Strong leadership, communication and organisational skills. Interested? Apply today with your CV or contact Tanya at Abatec Recruitment for more information. Tel: (phone number removed) (Mon–Fri, 9am–5pm)

We are looking for a hands-on Production Assembly Team Leader to support a small team within a busy manufacturing environment. This role would suit someone with previous experience leading a production or assembly team who is still comfortable working practically alongside the team on the shop floor. The successful candidate will support day-to-day production, allocate workloads, maintain quality standards and help the team achieve output targets. The work involves small components and metal assembly, so excellent attention to detail, accuracy and a strong quality focus are essential. Previous experience using saws, cutting equipment, hand tools or power tools would be highly beneficial. Key Responsibilities Lead and support a small production / assembly team Allocate daily workloads and organise production priorities Work hands-on alongside the team on the shop floor Monitor productivity, quality and team performance Ensure finished products meet required quality standards Support and train new and existing team members Identify and resolve day-to-day production issues Escalate technical or quality concerns where required Ensure Health & Safety procedures are followed at all times Maintain good housekeeping and 5S standards * Support continuous improvement within the department About You You will ideally have previous Team Leader, Supervisor or Senior Operative experience within manufacturing, production, assembly, fabrication or engineering. You will be confident leading people while remaining practical and involved in production. A good eye for detail, strong work ethic and drive to improve the team are particularly important. Experience within fabrication, saw operation, cutting machinery, assembly, technical drawings or hand and power tools would be advantageous. Working Hours Monday to Friday, 8:00am – 4:00pm There is a degree of flexibility around working hours depending on business requirements. If you are an ambitious Production Lead / Team Leader who thrives in a fast-paced manufacturing environment and wants to make a real impact, we want to hear from you. Key Skills: Team Leadership • Manufacturing • Production Supervision • Assembly • Fabrication • Saw Operation • Cutting Machinery • Quality Control • Work Allocation • Training & Development • Hand & Power Tools • Health & Safety • 5S • Continuous Improvement Apply now and we will be in touch with further details. Alternatively, call Tanya on (phone number removed) (Monday–Friday, 9:00am–5:00pm). Abatec Ltd. is acting as an employment agency on behalf of our client. INDENGT

Guided Talent are seeking a dedicated Service Engineer to join the largest Service and Sales support network within the UK Sheet Metal Industry. This is a new, permanent, full-time position based within the Service Department in Bristol M5. The role primarily involves routine planned maintenance of machine tools and associated equipment, offering an excellent opportunity for an engineer to transition into a first-time service role. Flexibility in working hours and travel will be required to meet the demands of clients across the area, along with a strong emphasis on delivering high standards of customer service and maintaining professional values. A suitable engineering qualification, such as an apprenticeship, NVQ level 3 training, or previous experience in the engineering sector with a logical employment pattern. Basic understanding of electrical, hydraulic, and mechanical systems (advantageous). Enthusiastic and self-motivated approach to work. Smart and professional presentation. Ability to work independently using your own initiative. Effective communication skills across all levels of an organisation. This role offers a highly competitive salary with an added bonus scheme dependent on experience. You will have the chance to develop a career in Field Engineering with full training provided through a structured in-house and field-based programme. Other benefits include contribution towards a pension scheme, private healthcare, a company car, 25 days of annual leave plus bank holidays, and a full expenses package. The company supplies full tooling, IT equipment (laptop, tablet, and mobile phone), and a uniform to ensure you are well-equipped for your duties

Morson are exclusively recruiting for Skilled Fabricators to work on an initial 12 month contract with GKN Aerospace based at their site in Filton (BS34 9AU) Suitable candidates must either have a recognised and relevant apprenticeship OR the equivalent NVQ Level 3 standard CERTS MUST BE PROVIDED WITH APPLICATION Rate(s): £20.17 per hour Days (Monday - Thursday 7am to 4.15pm) £25.21 per hour 7 Day Fortnight Day Shift (Week 1 Mon, Tues, Weds, Sat and Sun. Week 2 Thurs and Fri 7am-6:45pm 11 hrs 45 mins per day) All overtime paid at £30.26 per hour (with stamp £31.50 per hour) Candidates living 50 miles or more from site will be eligible to up to £700/week to cover travel expenses (mileage and accomodation), for over 75 miles up to £800/week is available. The role involves the use of hand, electrical and pneumatic tools and bending machines to shape, form and assemble metal products within drawing limits. Desired abilities to include (but not limited to): Use of jigs to assemble parts made from stainless steel, titanium or aluminium Fitting Swaging Measuring machinery and jigs Awareness of recognised quality process, i.e. ISO 9001, AS/EN9100, or similar The role involves but is not limited to the following: Working with metals that have less than 3-millimetre thickness Ensure parts are produced on a ‘right first time' basis Ensure that any calibrated equipment used is within date Responsible for the timely clearance of work phases using the SAP system Responsible for highlighting any non-conformance to the Process Team Leader Adhering to the requirements of the GKNAF Quality Procedures Accountable for Health & Safety requirements under Section 7 of the HASAWA 1974 To hold first party inspection approval (M02 status is subject to obtaining A stamp approval) Responsible for general housekeeping within the area Key Skills: A recognised and relevant apprenticeship or the equivalent NVQ Level 3 (Certificates must be provided) Previously worked with thin plate materials 3mm and less Previous manufacturing experience in a factory environment Ability to understand technical drawings/limits. Must be able to work in small teams with Process Team Leaders Self-motivated team player with good communication skills Knowledge of Lean manufacturing principles and techniques to support GKNAF continuous improvement initiatives would be desirable TPBN1_UKTJ

Job Title: Senior Embedded Software Engineer Location: Bristol (3 Days On-Site Per Week) Salary: £60,000 - £70,000 + Bonus & Benefits (Depending on Experience) NOTE: Only candidates with permanent, unrestricted UK working rights will be considered, as visa sponsorship is not offered for this position. Overview: This is an exciting opportunity for an experienced Embedded Software Engineer to join a collaborative and innovative engineering environment with a business at the beginning of the development journey for their next-generation product. The successful candidate will work closely with Senior Engineers and other members of the engineering team, taking a key role in designing and developing embedded firmware in C for bare-metal applications. This is an excellent opportunity for an engineer looking to take on greater technical responsibility and contribute to the development of innovative, high-technology products from an early stage. Job Responsibilities: • Design, develop, and maintain firmware in C to support product enhancements and new product development., • Take ownership of embedded software development activities across the product lifecycle., • Develop firmware for bare-metal embedded applications., • Lead and support the testing, debugging, and integration of embedded solutions., • Work closely with Senior Engineers and wider engineering teams to develop robust and reliable embedded products., • Follow structured development processes and contribute to code reviews and software quality improvements., • Use source code control systems such as Git to manage code versions and development activities., • Use task tracking systems such as Jira to record issues, manage development tasks, and support project coordination., • Provide technical input into software architecture, design decisions, and development methodologies., • Support the mentoring and development of less experienced engineers where appropriate. Experience Required:, • Strong experience in C programming for bare-metal embedded systems., • Experience with communication protocols such as SPI, RS485, and CAN., • Strong knowledge of ARM architectures, such as Cortex-M or Cortex-A., • Experience developing, debugging, and integrating embedded firmware., • Good understanding of embedded software development processes and best practices., • Experience using source control systems such as Git., • Experience working with task tracking and project management tools such as Jira., • Strong problem-solving skills and a methodical approach to software development., • Enthusiasm for low-level development and a passion for understanding how hardware and software interact. JBRP1_UKTJ

Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we're inspired by the opportunities to innovate and break boundaries. We're proud to play a part in protecting the world's democracies. And we're committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 32 manufacturing sites in 12 countries we serve over 90% of the world's aircraft and engine manufacturers and achieved sales of £3.6bn in 2025. There are no limits to where you can take your career. Job Summary GKN Aerospace Global Technology Centre in Bristol is the company's flagship aerospace research and development hub, bringing together engineers, researchers and industry partners to develop next-generation aircraft technologies, advanced manufacturing processes and sustainable aviation solutions. It plays a key role in innovations such as lightweight composite structures, electrification, hydrogen-powered flight technologies and the decarbonisation of aerospace. We are currently hiring for several years in industry internship opportunities at our Bristol GTC. As a Year in Industry student, you'll have the opportunity to work on real projects that contribute to the future of aerospace. You'll gain hands-on experience, receive support from industry experts, and develop valuable skills that will accelerate your career. Our interns make a genuine impact from day one and are trusted to contribute to meaningful work across the business. Location: GKN Aerospace Global Technology Centre, Bristol, UK. Contract: 12-month industrial placement. Start Date: August/September 2027. What You'll Be Doing As an Intern in Additive Manufacturing, specifically directed energy deposition (DED), you will support the wider team in our continued development and industrial implementation of GKN Aerospace proprietary additive technology, Laser Metal Deposition by wire (LMDw). We are focused on long term use for large (>1m), critical aerostructure applications, mainly using titanium alloys. In this role you will draw on your broad foundational knowledge of Engineering and Material Science, applying this knowledge on a range of research activities. It has the potential to cover a wide range of responsibilities, including aspects such as material characterization, test campaign definition, data analysis, component design, process simulation, industrial system modifications, robotics software development and/or transitioning new technology to an aerospace production state. This placement is most suited to someone looking for a varied placement who is a self-starter, and who can work autonomously. You will work alongside some of the UK's leading minds in Additive Manufacturing, while having the chance to collaborate with other GKN Aerospace teams developing this technology across the globe. What You'll Bring We are looking for you to bring your best self, we believe we can add the most as an individual while being our true selves. For this opportunity we're looking for candidates who have the following skills, experiences, or education: Knowledge and Education • Must be studying towards an undergraduate degree in any Engineering discipline or Material Science., • An enthusiasm for additive manufacturing linked with an interest in aerospace., • Eager to learn new technical skillsets, both software and hardware., • Ability to work collaboratively as part of a diverse team., • Good written and verbal communication skills in English, coupled with good IT skills., • Experience with CAD packages (CATIA, Siemens NX, Fusion 360, SolidWorks). Functional Behaviours & Capabilities, • Eager to learn new technical skillsets, both software and hardware., • Ability to work collaboratively as part of a diverse team., • Written and verbal communication skills in English., • Attention to detail. Desirable, • Experience with coding (C++, python...) and machine learning., • Practical hands-on manufacturing experience. What we're looking for above most other things is a genuine interest and passion for aerospace. What We'll Offer We have an opportunity available for aspiring engineers to join our LMDw team on a year-long placement for academic year 26/27. The expected start date is the middle of August/September 2027. This is a once-in-a-lifetime opportunity to immerse yourself in innovative aerospace projects, develop cutting-edge technologies, and gain experience that could define your career. If you're a self-starter looking for a varied and challenging placement, we want to hear from you! Here's what to look forward to when you join us: • A starting salary of £24,500, plus a starting bonus of £500 and generous benefits package., • A welcoming year in industry intern community., • Opportunities for international exposure and collaboration., • Flexible working hours including the ability to finish at early on a Friday., • Hybrid working., • 25 days holiday plus bank holidays., • An industry leading pension scheme; 1.5 x employee contribution (max 12%)., • 8x salary life assurance scheme., • Income protection., • A collaborative, dynamic working environment. Kick-start your career in aerospace and become part of GKN's team. Apply now! What To Expect in The Selection Process Through this process we try to utilise humans in the process as much as we can. Here's what to expect: 1. Apply online by completing our application form, including a few pre-screening questions. (closing date is Sunday 22nd November)., 2. The successful candidates will take part in an online assessment if you meet the initial eligibility criteria. Once you've been sent the link you will have 2 weeks to complete the assessment., 3. Dependent on volume of applications we may ask you to complete a one-way video interview on VidCruiter., 4. Join us at our Assessment Centre at the Global Technology Centre in Bristol, to be held on 2nd or 3rd of February 2027. This is where you will get the chance to showcase your skills and potential., 5. Begin your journey with us in August/September 2027, as part of our Global Technology Centre Year in Industry Intern Programme. *Please note that GKN Aerospace reserves the right to change this process if we feel it will benefit our hiring process. This will be communicated to any relevant candidates as necessary. We'll offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go? A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles we've created a culture where everyone feels welcome to contribute. It's a culture that won us 'The Best Workplace Culture Award'. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. We're also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. JBRP1_UKTJ

The Mechanical Engineer II - Nuclear Systems will support the analysis, design, and structural integrity assessment of mechanical components (heat exchangers, condensers, tanks, etc.) and reactor internals for advanced reactors including SMRs. This role combines technical expertise in stress analysis, fracture mechanics, fatigue evaluation, and regulatory compliance with a proven background in multidisciplinary project execution. Almondsbury (Bristol Area), UK - Relocation Assistance Available! • Perform mechanical design and stress analysis for ASME Section III Class 1, 2, and 3 components and supports, • Conduct detailed stress analysis using industry tools (ANSYS, LS-DYNA, MATLAB, Mathcad), • Perform fracture mechanics and fatigue life evaluations of metal structures, • Ensure compliance with nuclear codes and standards (ASME BPVC II/III/XI, ANSI/AISC N690, ANSI N14.6), • Develop and review engineering deliverables including stress reports, design calculations, and fitness-for-service evaluations, • Review vendor reports for technical acceptance and regulatory/contract compliance, • Support fabrication, construction, and field issue resolution, • Respond to regulator requests for information in support of licensing activities, • Mentor engineers and provide technical leadership to other team members, • Bachelor’s degree in Mechanical, Structural, or Aerospace Engineering (MSE preferred), • Eligibility to work under 10 CFR Part 810, • 5-7 years of experience in mechanical design analysis and component integrity, • Knowledge of material degradation mechanisms including brittle fracture and fatigue, • Experience with numerical modeling and simulation tools such as ANSYS, LS-DYNA, Solidworks, • Strong technical writing, communication, and collaboration skills, • Professional Engineer (P.Eng. or PE) license, • Experience with PWR or SMR reactor systems, • Familiarity with ASME Section III Class 1, 2, 3 component design and analysis, • Familiarity with nuclear regulatory requirements (10CFR50, NUREG-0800), • Experience with seismic design and analysis of equipment Investing in people who power the future. We believe great work deserves great rewards. Our benefits go beyond the basics, reflecting our commitment to supporting your whole self your health, your future, and your career growth. This includes: • Private health insurance for physical and mental health, 24/7 GP access, dental/optical cashback and travel insurance for you and your family, • 25 days annual leave plus bank holidays, with Christmas shutdown, • Hybrid work opportunities available where business needs and role requirements allow, • Education assistance to support continued professional growth, reimbursement of professional membership fees, • Employer matched pension contributions, life insurance, enhanced maternity/paternity benefits If you're driven to solve meaningful challenges and make a lasting impact, we invite you to build your career at Holtec a generation ahead by design. #J-18808-Ljbffr

Our client is a defence technology company. We're building the UK's next generation engineering powerhouse, providing critical technology that strengthens national security and resilience. We specialise in turning advances in sensing, AI, and communications into operational capability for the edge, where connectivity may be degraded or denied. Our work focuses on accelerating the deployment of technology, improving decision-making for frontline teams, and protecting people and critical assets in demanding environments. Headquartered in Bristol, our client employs around 200 people and operates over 20,000 square feet of engineering and manufacturing facilities. We have a growing international footprint and are one of Europe's fastest-growing engineering businesses. About the role We're seeking a Senior Platform Engineer to help build the engineering platform that underpins how our client develops, deploys, and operates technology. The platform will improve developer experience and make our client's engineering faster, more consistent, more scalable, and more secure. This is a high-impact opportunity to shape the foundations of one of the UK's most exciting technology companies. Working closely with Software, Infrastructure, ML, IT, Product, QA, and Security teams, you'll be hands-on in delivering the platform vision and improving engineering experience. You'll play a critical role in building the tooling, infrastructure, and capabilities that enable our engineers to solve complex customer problems. Candidates must be eligible for SC Clearance. More information about security clearance is available here: areas of responsibility Working within the Platforms team, you'll build robust platform services, enabling self-service infrastructure, seamless CI/CD, and strong observability, while also supporting API-first development, system integration, and the adoption of AI/ML capabilities across the organisation. Turning platform strategy into reality through high-quality engineering - setting standards and patterns that teams can adopt with confidence. As a Senior Platform Engineer, you will be responsible for: Designing, building, and maintaining core platform infrastructure and services. Developing and evolving internal developer platform (IDP) capabilities, including self-service provisioning and deployment workflows. Designing and supporting API-first architectures to enable interoperability between systems, services, and external partners. Building and optimising CI/CD pipelines to support consistent, secure, and efficient software delivery. Enabling integration patterns across distributed systems, including event-driven architectures and service-based communication. Contributing to modular platform capabilities that allow teams to compose and extend functionality. Collaborating Software, Infra, ML, IT, Product, QA, and Security teams to ensure the platform meets real-world engineering needs. Implementing infrastructure-as-code and automation to ensure repeatability, scalability, and reliability. Embedding security, compliance, and best practices into the platform by design. Contributing to platform standards, patterns, and reusable components to drive consistency across teams. Improving observability, monitoring, and alerting capabilities across systems and services. Supporting onboarding of teams to the platform and enabling adoption through documentation and guidance. Continuously identifying opportunities to improve developer experience, reducing friction and cognitive load. Key skills, experience and behaviours We are looking for a highly capable, hands-on engineer who enjoys solving complex problems and building systems that others rely on. Skills you'll need: Strong experience building and operating cloud-based platforms. Deep understanding of platform engineering principles, including infrastructure-as-code, CI/CD, system design, and service integration. Experience designing and working with APIs and building integration layers between systems. Experience with tools such as Terraform, Kubernetes, Docker, and modern CI/CD platforms. Experience with cloud and bare-metal deployments. Understanding of modular platform design and composable architectures. Familiarity with observability tooling (e.g. logging, metrics, tracing) and building reliable systems. Knowledge of secure-by-design and zero-trust principles. Strong software engineering fundamentals (e.g. Python, Go, or similar) to build platform tooling and automation. Experience working in cross-functional teams and contributing to shared technical outcomes. Behaviours that matter: Mission-Focused: You care about enabling others to do their best work and delivering meaningful outcomes. Relentless: You take ownership and see problems through to resolution. Collaborative: You work effectively across teams, building trust and shared understanding. Quality-Driven: You take pride in building robust, scalable, and maintainable systems. Pragmatic: You focus on solutions that work in practice, not just in theory. Curious & Adaptive: You continuously learn, improve, and embrace new approaches where they add value - particularly in fast-moving areas like AI and platform integration. Working at our client We are committed to building a flexible, inclusive, and enabling company. Our aim is to create a diverse team of talented people with unique skills, experience, and backgrounds, so please apply and come as you are! We also recognise the importance of flexible working and support this wherever we can. We typically operate a flexible, hybrid-working model, with an average 3 days in the office each week (dependent on the role). We welcome the opportunity to discuss flexibility, part-time working requirements and/or workplace adjustments with all our applicants. Our client is a Disability Confident Committed company, and we actively encourage people with disabilities and health conditions to apply for our roles. Please let us know your requirements early on so that we can make sure you have everything you need up front to help make the recruitment process and experience as easy as possible. Finally, if you feel that you don't meet all the criteria included above but have transferable skills and relevant experience, we'd still love to hear from you! TPBN1_UKTJ

Vatn Systems in Bristol, RI is seeking an Embedded Firmware Engineer (Mid-Level) to design, implement, and maintain firmware for autonomous underwater vehicles. You’ll work across bare‑metal, RTOS, and embedded Linux, writing C, C++, and Go, and you’ll bring up new hardware to ensure reliable operation in demanding maritime conditions. Collaborate with electrical, mechanical, and autonomy engineers to translate system requirements into robust embedded solutions. #J-18808-Ljbffr

RYANAIR ENGINEERING are creating a Military Pathway. We are looking to meet with current and ex Military personnel, who are looking to work within the Commercial Airline sector. We are recruiting for numerous roles, across our bases in Birmingham, Bournemouth, Bristol, East Midlands, Edinburgh, Leeds, Liverpool, Manchester, Newcastle, Prestwick and Stansted. These roles include, but are not limited to: • B1 Licensed Engineer, • B2 Licensed Engineer, • CAT A Engineer/Mechanic, • Licensed Aircraft Structures Engineers, • Aircraft Sheet Metal Workers, • Mechanical Basic Skills Training Instructor, • Avionic Basic Skills Training Instructor, • Stores Officer, • Aircraft Mechanic Ryanair is a fast-paced and dynamic airline known for its exceptional career opportunities and industry-leading growth. With our fleet of 600+ aircraft, including the new Boeing 737-8200 ‘Gamechanger’ and 300 Boeing 737 MAX 10 on order, this is an excellent time to join our team, advance your career and join Europe’s leading airline. Please follow the application process and we will be in touch to confirm a time on the day, that one of our Engineering team will meet with you. • Excellent Salary, • Unparalleled Progression Opportunities, • Fixed Roster Patterns, • Stable Employment, • Approved Training delivered by our Part 147 Training School, if required. If you are a hard working current or ex Military service person who strives to achieve excellence in the workplace, we look forward to hearing from you! Join our team and become part of an organisation committed to excellence in aircraft maintenance and safety. Please register your interest to come along and speak with our team to find out about the fantastic opportunities we have available across the Ryanair UK network. • You must have previous experience working on Aircraft, • Excellent English communication skills, both verbal and written (Essential)., • Good IT Literacy (Essential). #J-18808-Ljbffr

RYANAIR ENGINEERING are creating a Military Pathway. We are looking to meet with current and ex Military personnel, who are looking to work within the Commercial Airline sector. We are recruiting for numerous roles, across our bases in Birmingham, Bournemouth, Bristol, East Midlands, Edinburgh, Leeds, Liverpool, Manchester, Newcastle, Prestwick and Stansted. These roles include, but are not limited to: • B1 Licensed Engineer, • B2 Licensed Engineer, • CAT A Engineer/Mechanic, • Licensed Aircraft Structures Engineers, • Aircraft Sheet Metal Workers, • Mechanical Basic Skills Training Instructor, • Avionic Basic Skills Training Instructor, • Stores Officer, • Aircraft Mechanic Ryanair is a fast-paced and dynamic airline known for its exceptional career opportunities and industry-leading growth. With our fleet of 600+ aircraft, including the new Boeing 737-8200 ‘Gamechanger’ and 300 Boeing 737 MAX 10 on order, this is an excellent time to join our team, advance your career and join Europe’s leading airline. Please follow the application process and we will be in touch to confirm a time on the day, that one of our Engineering team will meet with you. • Excellent Salary, • Unparalleled Progression Opportunities, • Fixed Roster Patterns, • Stable Employment, • Approved Training delivered by our Part 147 Training School, if required. If you are a hard working current or ex Military service person who strives to achieve excellence in the workplace, we look forward to hearing from you! Join our team and become part of an organisation committed to excellence in aircraft maintenance and safety. Please register your interest to come along and speak with our team to find out about the fantastic opportunities we have available across the Ryanair UK network. • You must have previous experience working on Aircraft, • Excellent English communication skills, both verbal and written (Essential)., • Good IT Literacy (Essential). #J-18808-Ljbffr

M&E Recruitment Specialists Kingston Barnes Ltd are currently recruiting for Electricians in Cheltenham, Gloucestershire • Positions Available = Commercial Electrician, • Start Date = ASAP, • Project = Wiring and Metal Containment Installation Work, • Pay Rate & Hours = £28.00 per hour & 45 hours per week., • Required Duration = 5 Weeks minimum, • Experience & Qualifications = You must have experience of Commercial Electrical Installation work and hold a valid ECS/JIB Card and an IPAF qualification to operate a scissor lift. #J-18808-Ljbffr

We’re building the UK's next generation engineering powerhouse, providing critical technology that strengthens national security and resilience. We specialise in turning advances in sensing, AI, and communications into operational capability for the edge, where connectivity may be degraded or denied. Our work focuses on accelerating the deployment of technology, improving decision‑making for frontline teams, and protecting people and critical assets in demanding environments. Headquartered in Bristol, Rowden employs around 200 people and operates over 20,000 square feet of engineering and manufacturing facilities. We have a growing international footprint and are one of Europe’s fastest-growing engineering businesses. We’re seeking a Senior Platform Engineer to help build the engineering platform that underpins how Rowden develops, deploys, and operates technology. The platform will improve developer experience and make Rowden’s engineering faster, more consistent, more scalable, and more secure. This is a high‑impact opportunity to shape the foundations of one of the UK’s most exciting technology companies. Working closely with Software, Infrastructure, ML, IT, Product, QA, and Security teams, you’ll be hands‑on in delivering the platform vision and improving engineering experience. You’ll play a critical role in building the tooling, infrastructure, and capabilities that enable our engineers to solve complex customer problems. Candidates must be eligible for SC Clearance. More Information About Security Clearance Is Available Here government/publications/united-kingdom-security-vetting-clearance-levels Working within the Platforms team, you’ll build robust platform services, enabling self‑service infrastructure, seamless CI/CD, and strong observability, while also supporting API‑first development, system integration, and the adoption of AI/ML capabilities across the organisation. Turning platform strategy into reality through high‑quality engineering - setting standards and patterns that teams can adopt with confidence. • Designing, building, and maintaining core platform infrastructure and services., • Developing and evolving internal developer platform (IDP) capabilities, including self‑service provisioning and deployment workflows., • Designing and supporting API‑first architectures to enable interoperability between systems, services, and external partners., • Building and optimising CI/CD pipelines to support consistent, secure, and efficient software delivery., • Enabling integration patterns across distributed systems, including event‑driven architectures and service‑based communication., • Contributing to modular platform capabilities that allow teams to compose and extend functionality., • Collaborating Software, Infra, ML, IT, Product, QA, and Security teams to ensure the platform meets real‑world engineering needs., • Implementing infrastructure‑as‑code and automation to ensure repeatability, scalability, and reliability., • Embedding security, compliance, and best practices into the platform by design., • Contributing to platform standards, patterns, and reusable components to drive consistency across teams., • Improving observability, monitoring, and alerting capabilities across systems and services., • Supporting onboarding of teams to the platform and enabling adoption through documentation and guidance., • Continuously identifying opportunities to improve developer experience, reducing friction and cognitive load. We are looking for a highly capable, hands‑on engineer who enjoys solving complex problems and building systems that others rely on. • Strong experience building and operating cloud‑based platforms., • Deep understanding of platform engineering principles, including infrastructure‑as‑code, CI/CD, system design, and service integration., • Experience designing and working with APIs and building integration layers between systems., • Experience with tools such as Terraform, Kubernetes, Docker, and modern CI/CD platforms., • Experience with cloud and bare‑metal deployments., • Understanding of modular platform design and composable architectures., • Familiarity with observability tooling (e.g. logging, metrics, tracing) and building reliable systems., • Knowledge of secure‑by‑design and zero‑trust principles., • Strong software engineering fundamentals (e.g. Python, Go, or similar) to build platform tooling and automation., • Experience working in cross‑functional teams and contributing to shared technical outcomes., • Mission‑Focused: You care about enabling others to do their best work and delivering meaningful outcomes., • Relentless: You take ownership and see problems through to resolution., • Collaborative: You work effectively across teams, building trust and shared understanding., • Quality‑Driven: You take pride in building robust, scalable, and maintainable systems., • Pragmatic: You focus on solutions that work in practice, not just in theory., • Curious & Adaptive: You continuously learn, improve, and embrace new approaches where they add value - particularly in fast‑moving areas like AI and platform integration. We are committed to building a flexible, inclusive, and enabling company. Our aim is to create a diverse team of talented people with unique skills, experience, and backgrounds, so please apply and come as you are! We also recognise the importance of flexible working and support this wherever we can. We typically operate a flexible, hybrid‑working model, with an average 3 days in the office each week (dependent on the role). We welcome the opportunity to discuss flexibility, part‑time working requirements and/or workplace adjustments with all our applicants. Rowden is a Disability Confident Committed company, and we actively encourage people with disabilities and health conditions to apply for our roles. Please let us know your requirements early on so that we can make sure you have everything you need up front to help make the recruitment process and experience as easy as possible. Finally, if you feel that you don’t meet all the criteria included above but have transferable skills and relevant experience, we’d still love to hear from you! #J-18808-Ljbffr

We're building the UK's next generation engineering powerhouse, providing critical technology that strengthens national security and resilience. We specialise in turning advances in sensing, AI, and communications into operational capability for the edge, where connectivity may be degraded or denied. Our work focuses on accelerating the deployment of technology, improving decision-making for frontline teams, and protecting people and critical assets in demanding environments. Headquartered in Bristol, Rowden employs around 200 people and operates over 20,000 square feet of engineering and manufacturing facilities. We have a growing international footprint and are one of Europe's fastest-growing engineering businesses. We are hiring an Edge Compute Lead to take ownership of the hardware our engineers design, build and test on. The scope of the role will encompass everything from resource‑constrained edge nodes, through to test infrastructure and high‑performance compute. Working within the Platforms team, you will ensure that decisions made at the silicon, board and network layer support what runs above them - operating systems, orchestration, inference stacks and applications. This is a hands‑on technical role without direct reports. Your influence will come from judgement, evidence, and the quality of what you put in front of engineers. You'll be the person teams come to when they need to know what to build on. You will hold a set of known‑good, documented configurations, advise projects on the right platform for the problem in front of them, and stand up reference systems and test capabilities that let people prove their work early and repeatedly. This role requires an average of 4 days per week on‑site at our Bristol HQ, with occasional travel. Candidates must be eligible for SC clearance. More information about security clearance is available here: government/publications/united-kingdom-security-vetting-clearance-levels • Own the engineering hardware estate: specify, procure, configure and maintain compute, HPC, GPU, storage and networking hardware across its full life, from selection to retirement., • Lead on edge hardware: evaluate and integrate small form factor compute so that our systems perform wherever they are deployed., • Build reference systems: create and maintain representative engineering systems and test capabilities that teams can rely on for integration, test & evaluation., • Align hardware with software: work with the Platforms team so that firmware, drivers, interconnect and accelerator choices support the operating system and application layers above., • Advise project teams: recommend platforms, publish known‑good configurations, and help engineers reach the right hardware decision quickly., • Set the standard: define and hold sensible standardisation, documentation and configuration baselines, so kit is supportable and reproducible rather than bespoke to one project., • Keep things performant and available: benchmark, monitor and plan capacity, resolve faults, and manage spares, warranties and refresh cycles., • Managing suppliers: build relationships with vendors and integrators, test claims against real workloads, and get good value from specialist purchases., • Hands‑on experience specifying, building and running compute hardware for engineering, research, or laboratory use., • Practical knowledge of GPU and accelerated computing, including how memory, interconnect and thermal limits shape real workload performance., • Experience with embedded or ruggedised compute platforms under size, weight and power constraints., • Strong Linux fundamentals, including firmware, drivers, provisioning and troubleshooting close to the metal., • Working knowledge of networking and storage sufficient to design and debug systems end to end., • A track record of turning an ad hoc collection of kit into a standardised, documented, supportable estate., • Experience procuring specialist hardware and holding suppliers to account on lead times, support and performance., • Experience with edge AI modules, CUDA, and the surrounding driver and container stack., • Familiarity with bare‑metal provisioning., • Background in defence, aerospace, motorsport, scientific computing or another sector with demanding hardware requirements., • You are genuinely interested in technology and in what it lets the end user do, not in the specification sheet for its own sake., • You enjoy being the person others ask, and you give a straight answer with the reasoning behind it., • You test claims rather than accept them, and you are comfortable saying when a shiny option is the wrong one., • You are happy with your hands on the kit, and equally happy writing the documentation that means nobody has to ask you twice., • You work well with engineers and translate easily between what they need and what the hardware can give them. No prior defence experience is required. We're interested in people who've built and run hardware for demanding environments that want to see their work reach the field. We are committed to building a flexible, inclusive, and enabling company. Our aim is to create a diverse team of talented people with unique skills, experience and backgrounds, so please apply and come as you are! We also recognise the importance of flexible working and support this wherever we can. We typically operate a flexible, hybrid-working model, with an average 3 days in the office each week (dependent on the role). We welcome the opportunity to discuss flexibility, part‑time working requirements and/or workplace adjustments with all our applicants. Rowden is a Disability Confident Committed company, and we actively encourage people with disabilities and health conditions to apply for our roles. Please let us know your requirements early on so that we can make sure you have everything you need up front to help make the recruitment process and experience as easy as possible. Finally, if you feel that you don’t meet all the criteria included above but have transferable skills and relevant experience, we’d still love to hear from you. #J-18808-Ljbffr

Company: Vatn Systems Location: Bristol, RI Type: Full-time (Onsite) Vatn Systems is an innovative startup at the forefront of designing and manufacturing autonomous underwater vehicles (AUVs). Our mission is to revolutionize underwater security, exploration, research, and operations through cutting‑edge technology and unparalleled engineering. Our AUVs are defining the next generation of underwater autonomy. We are looking for a talented and motivated Embedded Firmware Engineer to join our growing team. In this role, you will design, develop, and maintain the firmware that runs our AUVs — from bare‑metal on embedded microcontrollers to system software on embedded Linux boards. You'll write C, C++, and Go across the stack, bring up new hardware, and own the low‑level software that keeps our vehicles running reliably in demanding maritime conditions. The ideal candidate is a proactive engineer who enjoys working close to the metal and thrives at the hardware/software boundary. • Design, build, and maintain efficient, reliable firmware in C and C++ for embedded microcontrollers (bare‑metal and RTOS)., • Develop system‑level software and services in Go, C, and C++ on embedded Linux boards., • Bring up new hardware: board bring‑up, bootloaders, device drivers, and board support packages., • Implement and debug communication between subsystems over interfaces such as UART, SPI, I2C, CAN, and Ethernet., • Integrate sensors, actuators, and peripherals, and implement real‑time control and telemetry paths., • Optimize firmware for performance, memory footprint, and power., • Collaborate with electrical, mechanical, and autonomy engineers to translate system requirements into robust embedded solutions., • Write and maintain unit and integration tests, and support hardware‑in‑the‑loop testing., • Participate in code reviews, providing and receiving constructive feedback to improve our engineering practices., • Troubleshoot, debug, and upgrade existing firmware, including on‑vehicle and field debugging., • Degree in Electrical Engineering, Computer Engineering, Computer Science, or a related technical field (or equivalent practical experience)., • 3–5 years of professional embedded software/firmware development experience., • Strong proficiency in C and C++ for embedded microcontrollers (bare‑metal and/or RTOS)., • Hands‑on experience developing firmware for STM32 microcontrollers (e.g., STM32CubeMX/HAL, LL drivers, or bare‑metal register‑level programming)., • Experience developing on embedded Linux platforms., • Solid understanding of hardware/software integration: reading schematics and datasheets, and debugging with oscilloscopes, logic analyzers, and JTAG/SWD., • Experience with embedded communication protocols (e.g., UART, SPI, I2C, CAN, Ethernet)., • Familiarity with real‑time constraints, interrupts, DMA, and low‑level memory management., • Experience writing firmware for power‑constrained and/or resource‑limited systems (battery power budgets, tight memory/timing footprints)., • Proficiency with version control systems, specifically Git., • Excellent problem‑solving skills and the ability to work effectively in a team environment., • United States Citizen or Permanent Resident., • Ability to gain a security clearance., • Experience with cross‑compilation, build systems (e.g., CMake, Make, Yocto/Buildroot), and toolchains for embedded targets., • Experience developing with Go., • Experience with serialization protocols like Protobufs, DDS, etc., • Familiarity with robotics middleware or modern robotics frameworks (e.g., ROS 2)., • Experience with CI/CD pipelines for embedded software and automated hardware testing., • Knowledge of containerization and deployment on edge devices., • Experience with maritime sensors, underwater acoustics, or subsea systems., • Familiarity with functional safety or safety‑critical software development practices. Ready to build the future with us? Apply today! #J-18808-Ljbffr

Expleo is seeking an Embedded Mechanical Design Engineer to work within a systems engineering team on missile projects. You will translate customer needs into robust, verifiable mechanical design concepts and support throughout the product lifecycle. The role requires cross-disciplinary collaboration, experience in metal and composites, and proficiency with CATIA V5 and MBd. The position combines client site work with home-based work in a hybrid model. #J-18808-Ljbffr

Job Description A great opportunity to work as Bakery Operative at our clients site based in Farrington Gurney. /n The hours of work are; Monday to Friday, - 6am to 2pm /n The rate of pay is £12.71 per hour. /n Your Time at Work /n As a Bakery/Production Operative you will be responsible for: /n - Setting up and running bakery machinery including baking products /n - Carrying out metal detection checks /n - Accurately completing ... /n /n ZIPC1_UKTJ

Become a food delivery driver with Deliveroo and find work that suits you. Work when you want to, at the tap of a button. Proof of your right to work self-employed in the UK.

As one of the UK's leading healthcare providers, we take the growth of everyone who works for us seriously. As this is a Bank position to provide cover as and when we need it, such as for annual leave or sick leave, the hours and days you work will vary. Every day will be different, so you can expec

Enjoy consistent work, competitive pay and the opportunity to earn more during our busiest period. Christmas, for couriers working through to the start of January 2027. Typically, our drivers work around 9 hours per day and for 5 or 6 days per week.

Enjoy consistent work, competitive pay and the opportunity to earn more during our busiest period. Christmas, for couriers working through to the start of January 2027. Typically, our drivers work around 9 hours per day and for 5 or 6 days per week.

Enjoy consistent work, competitive pay and the opportunity to earn more during our busiest period. Christmas, for couriers working through to the start of January 2027. Typically, our drivers work around 9 hours per day and for 5 or 6 days per week.

Work is available all year round, you get paid every week, and you can be on the road within days. Work available out of Exeter all year round.

This is a casual, part-time role offering flexible working. As one of the UK's leading healthcare providers, we take the growth of everyone who works for us seriously. As this is a Bank position to provide cover as and when we need it, such as for annual leave or sick leave, the hours and days you w

You’ll work on a rotating shift schedule, including some weekends. You’ll be required to work one in six Sundays at Patchway. Delivery Office working between 12:00/18:00.

The Role 35–45 deliveries per day Consistent routes across local and surrounding areas Loading and unloading office supplies Delivering goods safely and providing excellent customer service Manual handling, including lifting and carrying boxes Working Hours & Benefits Monday to Friday, 7:00am–4:

Weekend work will be required some weeks. No endorsements for drug, drink, or careless driving offences You must be reliable, hard working and have previous multi drop experience Apply today for an immediate start This is an on-going temporary role with longer term prospects for the right

As a Regional Care Assistant with Barchester care homes, you'll deliver warm, empathetic and respectful care and support across a 20-mile radius to help our residents get the most out of life.On a practical level, you can expect to monitor the delivery of care when on duty, contribute to the person-

Start time between 0400-0600 Working as part of a two person team, delivering kitchens to customers homes.

As a Regional Senior Care Assistant with Barchester care homes, you'll deliver warm, empathetic and respectful care and support across a 20-mile radius to help our residents get the most out of life.On a practical level, you can expect to monitor the delivery of care when on duty, contribute to the

Early Morning Delivery Drivers Needed! Join News Team Group, a fast-growing company delivering newspapers and magazines to homes and businesses across the UK.We're looking for reliable, self-employed delivery drivers who are ready to hit the road and make an impact in their local community.Join a te

Every day will be different, so you can expect to undertake work that's as varied as it is rewarding.

We're looking for someone who takes pride in their work, has a positive attitude and is comfortable working independently while being part of a wider transport and distribution team. Overtime: This is a salaried position, with no additional overtime payments for hours worked during the normal workin

Key responsibilities Represent DX in a professional manner at all times Drive vehicles in a safe and legal manner ensuring compliance with all legal and company requirements at all times All daily checks are undertaken ensuring defects are immediately reported and correct paperwork completed Ensure

How You'll Contribute In this role, you'll work with materials including Titanium, Aluminium and Stainless Steel, carrying our a variety of work including: Swaging Pipe Bending Drilling, Reaming & Countersinking Operating relevant fabrication machinery What You'll Bring You'll need a recognised leve

Christmas, for couriers working through to the start of January 2027. Typically, our drivers work around 9 hours per day and for 5 or 6 days per week. Enjoy consistent work, competitive pay and the opportunity to earn more during our busiest period.