Trabajos quality inspection en BrentwoodCrear alertas

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £45,378 (inclusive of London Weighting Allowance, if applicable), with on-target earnings of up to £57,000, • A guaranteed overtime option to increase your base salary to £44,385, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Chelmsford cluster, covering areas like Chelmsford, Brentwood, Basildon, Southend‑on‑Sea, Grays, Tilbury, Thurrock, Maldon, Braintree, Canvey Island, Rayleigh. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile:, • Earnings That Motivate - enjoy a market-competitive base salary of £45,370, with the opportunity to increase your earnings up to £57,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £45,378 (inclusive of London Weighting Allowance, if applicable), with on-target earnings of up to £57,000, • A guaranteed overtime option to increase your base salary to £44,385, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Chelmsford cluster, covering areas like Chelmsford, Brentwood, Basildon, Southend‑on‑Sea, Grays, Tilbury, Thurrock, Maldon, Braintree, Canvey Island, Rayleigh. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile:, • Earnings That Motivate - enjoy a market-competitive base salary of £45,370, with the opportunity to increase your earnings up to £57,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £45,378 (inclusive of London Weighting Allowance, if applicable), with on-target earnings of up to £57,000, • A guaranteed overtime option to increase your base salary to £44,385, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Chelmsford cluster, covering areas like Chelmsford, Brentwood, Basildon, Southend‑on‑Sea, Grays, Tilbury, Thurrock, Maldon, Braintree, Canvey Island, Rayleigh. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile:, • Earnings That Motivate - enjoy a market-competitive base salary of £45,370, with the opportunity to increase your earnings up to £57,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Graduate Structural Engineer Are you a Graduate Structural Engineer, qualifying this year or last year, who is looking for a progressive and exciting career opportunity Are you ambitious to progress in the industry Do you excel in the act of producing great designs and relish the completion of the detail, and supporting documents in the process Do you want to join an established business and be an important cog in their growth plan Our client is an Essex-based, Building Design Consultants, who work mostly in the commercial market with developers and contractors. They are seeking an office-based, enthusiastic and proficient Graduate Structural Engineer to support the Architects in the business. Someone who is a highly detailed individual and IT proficient. This is an important role, and you will be part of a growing team who are focused on getting the business to the next level. This role is suitable for people who already have a Work Permit, or do NOT require one. No sponsorship is available for this role. Salary and Hours: • £28,000 to £35,000 subject to grades and specific work experience, • An office-based role, located on the 1st floor, • Full Time – 37.5 hours Benefits Our Client Offers: • Annual profit-related Bonus Scheme, • Group Life Assurance, • Employee Assistance Programme (EAP), • Bereavement Counselling and Probate Helping Service, • Group Personal Pension, • Healthcare insurance, • Career growth opportunities, • Training provided, • Team events, • Sick Pay Cover Position Purpose Working within a team of Engineers and Technicians, and under the supervision of the Project Manager / Owner. As a Graduate Engineer you are expected to deliver assigned tasks and provide technical support, working towards the overall successful delivery of technically challenging designs. Duties and Responsibilities: • Develop technical and management skills through ongoing study of design standards, codes, and guidance., • Demonstrate understanding of technical concepts., • Gain proficiency in BDC systems and procedures., • Comply with Health, Safety and Welfare regulations and promote team awareness., • Undertake continual professional development through practical experience and self-study., • Work towards Chartered Membership (ICE / IStructE)., • Assist in resolving technical issues., • Communicate regularly with project teams, providing progress updates., • Prepare and assist in compiling project documentation., • Review and check own work., • Coordinate with external parties (Architects, Engineers, Surveyors, utilities)., • Attend meetings, carry out site visits / investigations, and assist with inspection reports., • Understand project programmes and resource planning., • Manage delivery of assigned outputs to time and quality standards., • Prepare and present information internally., • Manage small tasks and projects., • Carry out complex structural calculations and design work., • Develop and interpret analytical models using relevant software., • Prepare clear and structured calculation reports., • Mark up and review reinforcement drawings., • Review structural drawings to ensure alignment with design assumptions., • Check third-party information for consistency with design and mark-ups., • Undertake any other reasonable duties. Results Expected: • Completion of quarterly training reports and maintenance of CPD records demonstrating progress towards Chartership., • Ongoing achievement of performance goals, with developing analytical skills and knowledge of codes, standards, and compliance requirements., • Progression towards Engineer / Senior Engineer level over a 3 – 4-year period. Standards To Be Met: • Demonstrate commitment to personal development by supporting on-the-job training with wider CPD study and background reading., • Adhere to BDC’s core values of People, Performance, Partnership, and Pride., • Maintain punctuality. Knowledge, Skills and Abilities: • Strong understanding of structural mechanics., • Working knowledge of Eurocodes., • Proficient in sketching and drawing., • Competence in Microsoft Office suite., • Effective report writing skills., • Strong communication skills, both written and verbal, including phone and face-to-face interaction. If you want to join an established, privately owned business and be a catalyst for their future growth, then this is the job for you. Their selection process is unique in the marketplace and attracts motivated, productive team members who they know will be successful and have a great career with themselves. They look forward to hearing from you. Don't miss this opportunity. Start your application NOW!

Quality Inspector – Night Operations Location: Romford Hours: Monday to Thursday, 5:00pm – 3:15am Shift Premium: Applicable About the Role We are seeking a detail-oriented Quality Inspector to join our clients night operations team. This position plays a key role in ensuring that manufactured components and assemblies meet internal quality standards, engineering specifications, and customer expectations before progressing through the production process. Working closely with production, engineering, and supply chain teams, you will be responsible for conducting inspections, maintaining accurate quality records, supporting process improvements, and helping drive a culture of quality throughout the business. Key Responsibilities • Perform dimensional and visual inspections on components, assemblies, and finished products against engineering drawings and specification requirements., • Verify product conformity throughout the manufacturing process and ensure compliance with established quality procedures., • Complete inspection documentation accurately, maintaining full traceability and audit-ready records., • Support production teams by carrying out timely first-off inspections and in-process verification activities., • Prepare and maintain First Article Inspection (FAI) documentation and supporting quality reports., • Conduct incoming goods inspections where required, ensuring purchased materials and components meet specified requirements., • Raise and document non-conformances, supporting containment and corrective action activities., • Escalate quality concerns promptly to relevant departments to minimise production disruption., • Assist with investigations into quality issues, contributing to root cause analysis and continuous improvement initiatives., • Ensure all inspection activities are performed in accordance with company quality, health & safety, and environmental procedures., • Provide inspection support across manufacturing, assembly, and supply chain functions as business needs require.Skills & ExperienceEssential, • Experience in a manufacturing quality inspection environment., • Competent in the use of precision measuring instruments, gauges, and inspection equipment., • Ability to read and interpret engineering drawings, specifications, and technical documentation., • Strong understanding of dimensional inspection techniques and drawing compliance., • Knowledge of both metric and imperial measurement systems., • Excellent attention to detail with a methodical approach to record keeping and documentation., • Ability to identify quality concerns and communicate findings effectively.Desirable, • Experience operating Coordinate Measuring Machines (CMMs)., • Background within aerospace, precision engineering, or other highly regulated manufacturing sectors., • Familiarity with First Article Inspection processes and reporting requirements., • Experience using ERP or MRP systems., • Awareness of quality tools and methodologies such as SPC, MSA, NDT, and ISO/ASME standards., • Understanding of continuous improvement and problem-solving techniques.What We Offer, • Competitive salary plus night shift allowance., • Company pension scheme with employer contributions., • Life assurance cover., • Healthcare support programme., • Employee assistance and wellbeing services., • Generous annual leave entitlement with service-related increases., • Employee discount and reward schemes., • Free on-site parking., • Opportunities for training, development, and career progression within a growing manufacturing business.Personal Attributes, • Quality-focused with a proactive mindset., • Able to work independently and make sound decisions., • Strong organisational and time management skills., • Effective communicator with the confidence to challenge quality concerns when necessary., • Team player who contributes positively to operational and continuous improvement objectives

Early Years Practitioner Romford | Full-Time | 4 Days Per Week | Up to £28,500 per annum Great Starts Recruitment is delighted to be recruiting on behalf of a well-established and highly regarded nursery in Romford for an experienced Early Years Practitioner. This is a fantastic opportunity to join a friendly and supportive team within a thriving nursery setting. About the Nursery The nursery operates across three age-specific rooms, providing dedicated environments for babies, toddlers and preschool children. The preschool setting currently holds an Outstanding Ofsted rating, with the baby and toddler provision awaiting inspection. The nursery is managed by one experienced manager across both buildings, creating a supportive and well-organised environment for staff and children alike. The Role You will work within the nursery's baby, toddler or preschool room, supporting children's learning, development and wellbeing through engaging and age-appropriate activities. This is a full-time position working across 4 days per week, all year round. Requirements Level 3 Early Years qualification preferred Strong Level 2 candidates will also be considered Previous nursery experience is essential Passionate about providing high-quality childcare and education Excellent communication and teamwork skills Salary & Benefits Salary up to £28,500 per annum Full-time, 4-day working week Day off on your birthday Free on-site parking Excellent public transport links Christmas and summer social events Regular team-building activities* Supportive and welcoming team environment If you are an experienced Early Years Practitioner looking for your next opportunity in Romford, we'd love to hear from you. To apply, please send your CV to:

CNC Turner - Programmer / Setter / Operator (Days)Brentwood, Essex | £39,000-£42,000 DOE + OT x1.5 Mon-Thu 07:00-17:15 (4-day week, days only) | Onsite parking Experienced CNC Turner required to programme using FANUC controls at the machine, set and operate CNC lathes producing small-batch components (one-offs/short runs) to drawings and tight tolerances. You'll need: FANUC programming + strong setting/operating, confident inspection (first-off/in-process/final), able to run jobs end-to-end and troubleshoot tooling/quality issues. Full details available upon application HRGO Recruitment provides both permanent and temporary job opportunities across the UK. Applicants must have the right to work in the UK. HRGO is committed to equal opportunities for all.

Night Shift Quality Control Inspector • Location: Romford, Essex, • Job Type: Full-time, Night Shift, • Salary: Dependent on experiece We are seeking a dedicated Night Shift Quality Control Inspector to join our clients' team. This role is crucial for ensuring the control and compliance of products within the Quality Control inspection department in accordance with current manufacturing and Quality Assurance procedures, engineering drawings, and customer requirements. Day-to-day of the role: • Verify the conformity of parts, assemblies, and sub-assemblies according to engineering drawings, the quality management system, and specific customer requirements., • Ensure comprehensive completion and auditable traceability of inspection records., • Support Production with the timely verification of batch first off., • Create and compile First Article Inspection Reports (FAIRs)., • Conduct inspection duties across all areas of the manufacturing and supply chain process as required., • Identify and report non-conformance as per the Company procedure., • Ensure compliance with Quality Assurance and HSE policies and procedures at all times., • Process and return documentation for parts dispatched for external processing., • Highlight and escalate quality concerns to production management and quality engineering., • Support problem-solving initiatives to drive root cause analysis and preventive action., • Participate in New Product Introduction planning meetings and advise on inspection methodology., • Engage in Continuous Improvement initiatives. Required Skills & Qualifications: • Ability to interpret and understand technical data including customer drawings, specifications, and FAIR documentation., • Experience with goods inward inspection of finished products/components., • Familiarity with aerospace customers and suppliers is preferred., • Proficiency in inspecting precision components ensuring adherence to drawing requirements., • Skilled in setting and using a variety of direct inspection gauges and measuring equipment., • Experience with Co-ordinate Measuring Machine (CMM) operation., • Knowledge of Sheet Metal/Fabricated parts inspection., • HND qualified or equivalent, with good knowledge of both Imperial and metric geometrical definitions., • Strong inspection, testing, and examination techniques., • Excellent numerical skills and the ability to make accurate measurement calculations., • Effective communication skills, both verbally and in writing., • Ability to work independently or as part of a team, managing tight deadlines while maintaining quality standards. To apply for the Night Shift Quality Control Inspector position, please submit your CV and a cover letter detailing your relevant experience and why you are interested in this role.

Sheet Metal Worker Romford High‑Precision Manufacturing Competitive Pay + Strong Benefits Actio Recruitment are supporting a long‑established precision manufacturing business in Romford who are looking to add an experienced Sheet Metal Worker to their production team. This is a hands‑on role working with complex components to exacting aerospace‑level standards. The Role Producing high‑accuracy sheet‑metal parts through bending, cutting, pressing, riveting, marking out, measuring, assembly and deburring Working with aluminium, stainless steel, titanium and Inconel, maintaining tight tolerances throughout Interpreting engineering drawings Setting and operating a range of equipment including fly press, brake press and linisher Checking jigs, fixtures and tooling Hand‑forming prototype panels and components from flat sheet Carrying out part of the finishing process deburring, drilling, trimming, filing and grinding as Conducting visual checks and dimensional inspection to ensure quality standards are met What You’ll Need Strong background in sheet‑metal fabrication within a precision environment Confident working with a variety of metals and thin‑gauge material Able to follow drawings accurately and work with minimal supervision Good attention to detail and a methodical approach to producing high‑quality parts Wh...

A leading precision engineering and aerospace manufacturing business is looking to recruit an experienced Night Shift Quality Inspector to join their growing Quality team. This is an excellent opportunity for a skilled inspector with experience in precision components, engineering drawings, FAIRs, and dimensional inspection to join a well-established business supplying high-specification products into demanding industries. Working on a permanent late shift, you'll play a key role in ensuring all products meet engineering, customer, and quality standards across manufacturing and supply chain operations. • Monday – Thursday, • 5:00pm – 3:15am, • Permanent late shift, • Shift premium included, • Carry out inspection of parts, assemblies, and sub-assemblies against engineering drawings and customer specifications, • Complete inspection documentation with full traceability and compliance, • Support production with first-off inspections and batch verification, • Produce and compile FAIRs (First Article Inspection Reports), • Conduct goods inward inspection activities, • Identify and report non-conformances in line with company procedures, • Support root cause analysis and corrective actions, • ...

New Way Recruitment LTD is recruiting for a Head of Quality in Romford, United Kingdom. This senior leadership role focuses on overseeing quality and compliance across elderly care homes. The successful candidate will have significant experience in quality leadership and a strong understanding of CQC standards. Responsibilities include strategic oversight, inspection preparations, and continuous improvement initiatives. The role offers a salary of up to £100,000 per annum plus a £5,000 car allowance, and applicants must have experience in nursing or care homes. #J-18808-Ljbffr

Job Type:Full-TimeSalary: 25180 - 35860 per annum + Shift & Role Allowance, 9-Day Fortnight Quality Inspector Practitioner Closing Date: 24th June 2026 Location: RG30 3RR , located between Reading and Basingstoke, with free onsite parking . Due to the classified nature of the work involved, there are no opportunities to work from home in this role. The successful candidate will spend their time working on site at AWE Burghfield . Package: 25,180-35,860p.a. (depending on your suitability, qualifications, and level of experience) o Plus shift allowance. o Plus role specific allowance. Working pattern: AWE operates a 9-day working fortnight. Working hours: T h is is a shift-based role. Two weeks working early shift, followed by two weeks working late shift. o Early shift: 06:00-14:45 hrs o Late shift : 14:15-23:00 hrs Ready to play your part? At AWE, it's not just a job, it's far more than that. Our shared purpose is to help keep the nation safe. Could this role be the opportunity for you to play your part? AWE is currently recruiting for a detail-oriented and proactive Quality Support Practitioner to join our Quality Stores Inspection Team (QSIT). This is an excellent opportunity for an individual who is passionate about maintaining high standards, ensuring compliance, and supporting continuous improvement within a manufacturing or production environment. We're looking for someone with a positive, can-do attitude who thrives in a dynamic setting. You will be part of a diverse and supportive team, working in a role where no two days are the same. Working within one of our secure and classified manufacturing areas, you will undertake a variety of tasks that support both quality and operational deliverables. This includes creating, coordinating, and analysing records, reports, and data to ensure the highest standards are consistently met. On a typical day, you will carry out a range of activities, including: Re-certifying components to ensure they are in good condition and fit for use. Re-grading components that are no longer suitable for operational use so they can be repurposed for training. Managing the disposal process for end-of-life components. Producing inspection and problem reports. Managing stock movements, including completion of route cards. Maintaining KANBAN stock levels within the store. Conducting kit checks, including multi-stage verification of components prior to assembly. Full training will be provided for this role. You will initially be paired with an experienced team member and supported through a structured onboarding process until your training is successfully completed and signed off. Who are we looking for? This role would suit an individual with experience in a quality, warehouse, or business administration environment who is highly organised, detail-oriented, and confident in building strong working relationships. It's an excellent opportunity for someone looking to develop their career in a role where full training and support will be provided. Above all, we value the right attitude - someone who is proactive, confident, and takes pride in presenting themselves professionally. We do need you to have the following: Confidence using Microsoft Word and Excel (advanced knowledge is not required, but a good working ability is essential). Strong communication skills, both written and verbal, with the ability to engage effectively with colleagues and stakeholders at all levels. Good analytical and problem-solving abilities. A commitment to maintaining high standards across environment, safety, health, security, and quality. A collaborative mindset and the ability to work effectively as part of a team. Whilst not to be considered a tick list, it would be beneficial if you have experience in any of the following areas: A BTEC qualification (or equivalent) in a STEM-related subject. Experience within a quality, operational, or business support environment. Familiarity with measuring equipment such as micrometers or verniers. Exposure to working with key performance indicators (KPIs). Experience with database systems and document management. You'll need to have the ability to work calmly and constructively in a priority changing environment and be able to manage your own workload. You will also have initiative, enthusiasm, a flexible approach, and ability to work to tight deadlines. If you're ready to build a career in quality and want to make a tangible impact in a highly regulated and fast-paced environment, we'd love to hear from you. Work hard, be rewarded: We ask a lot and set the bar high because our work truly matters. In return we offer balance, with award winning benefits including: 9-day working fortnight - meaning you get every other Friday off work, in addition to 270 hours of annual leave. Market leading contributory pension scheme (we will pay between 9% and 13% of your pensionable pay depending on your contributions). Family friendly policies: Maternity Leave - 39 Weeks Full Pay and Paternity Leave - 4 Weeks Full Pay. Opportunities for Professional Career Development including funding for annual membership of a relevant professional body. Employee Assistance Programme and Occupational Health Services. Life Assurance (4 x annual salary). Discounts - access to savings on a wide range of everyday spending. Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring. The 'Working at AWE' page on our website is where you can find full details in the 'AWE Benefits Guide'. #LI-KT1

Job Type:Full-TimeSalary: 30750 - 58920 per annum + Life Insurance, Pension, 9-Day Fortnight Metrology Engineer - Dimensional Inspection Closing Date: 16th July 2026 Location: RG30 3RR , located between Reading and Basingstoke, with free onsite parking . Due to the classified nature of the work involved, there are limited opportunities to work from home in this role. It is anticipated that the successful candidate will spend the majority of their time working on site at AWE Burghfield. Package: 30,750 - 58,920 per annum (depending on your suitability, qualifications, and level of experience) Working pattern: AWE operates a 9-day working fortnight. We will consider flexible working requests so that your work may fit in with your lifestyle. Just let us know your preferred working pattern on your application. Ready to play your part? At AWE, it's not just a job, it's far more than that. Our shared purpose is to help keep the nation safe. Could this role be the opportunity for you to play your part? We have an exciting opportunity to be part of a team that develops the inspection processes to certify the quality of nuclear weapon products. We are recruiting a Dimensional Inspection Engineer specialist to join the dynamic friendly team that 'make amazing happen'. Ideally, you will have a strong manufacturing background preferably with an emphasis on precision engineering and have experience using a first-principal measurement and a range of measuring equipment including coordinate measuring machines (CMMs). Preferred candidates may have served a recognised Engineering Apprenticeship and hold qualifications to HNC level in mechanical engineering or manufacturing technology. All training will be provided as well as a career path as a professional metrologist. We encourage and support personal growth in a broad range of skills to enable you to fulfil your potential. You will take up the challenge to deliver the inspection service with a friendly team working across AWE. Duties to include: Work with product development teams to identify metrology methods to suit product verification needs. Evaluate differing inspection technologies to identify those most suited. Develop and implement metrology / dimensional inspection methods and processes. Sound workshop experience in the application of inspection quality tools and techniques, production activities and processes. Inspection practices, use of inspection equipment, setting up of components/assemblies. Basic understanding of measurement uncertainty analysis Experience of and ability to interpret engineering drawings (GD&T) and technical specifications. Who are we looking for? We do need you to have the following: Experienced in Quindos and/or PC-DMIS programming software; however, we welcome all candidates with CMM technology experience. Experience of measurement from 1st Principles using manual instruments. Experience of defining measurement processes and conducting inspection of first articles or one-off components. Whilst not to be considered a tick list, we'd like you to have experience in some of the following: Knowledge or experience of surface metrology evaluation using tactile or optical instruments. Experience of introducing new metrology/inspection equipment. Experience of conducting Measurement System Analysis studies. Background in high-precision manufacturing industry (ideally machining or similar production methods). Basic understanding of problem resolution and continuous improvement tools and techniques. e.g. accredited by Yellow Belt and Green Belt programmes. Knowledge of practical applications of 6-sigma methodology. You'll need to have the ability to work calmly and constructively in a priority changing environment and be able to manage your own workload. You will also have initiative, enthusiasm, a flexible approach, and ability to work to tight deadlines. Work hard, be rewarded: We ask a lot and set the bar high because our work truly matters. In return we offer balance, with award winning benefits including: 9-day working fortnight - meaning you get every other Friday off work, in addition to 270 hours of annual leave. Market leading contributory pension scheme (we will pay between 9% and 13% of your pensionable pay depending on your contributions). Family friendly policies: Maternity Leave - 39 Weeks Full Pay and Paternity Leave - 4 Weeks Full Pay. Opportunities for Professional Career Development including funding for annual membership of a relevant professional body. Employee Assistance Programme and Occupational Health Services. Life Assurance (4 x annual salary). Discounts - access to savings on a wide range of everyday spending. Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring. The 'Working at AWE' page on our website is where you can find full details in the 'AWE Benefits Guide'. #LI-KT1

Job Type:Full-TimeSalary: 39280 - 58920 per annum + Pension, Life Insurance, 9-Day Fortnight Quality Inspector (R29879) Closing Date: 30th June 2026 Location: RG7 4PR , located between Reading and Basingstoke, with free onsite parking . Due to the classified nature of the work involved, there are limited opportunities to work from home in this role. It is anticipated that the successful candidate will spend the majority of their time working on site at AWE Burghfield. Package: 39,280 - 58,920 per annum (depending on your suitability, qualifications, and level of experience) Working pattern: AWE operates a 9-day working fortnight. We will consider flexible working requests so that your work may fit in with your lifestyle. Just let us know your preferred working pattern on your application. Ready to play your part? At AWE, it's not just a job, it's far more than that. Our shared purpose is to help keep the nation safe. Could this role be the opportunity for you to play your part? AWE has an excellent opportunity for a skilled Quality Inspector to support the delivery of critical engineering and manufacturing programmes. As a Quality Inspector at AWE, you'll play a vital role in ensuring inspection activities are delivered to the highest standards. You'll contribute expert insight, ensure compliance with Quality requirements, and support the continuous improvement of inspection processes across a diverse range of projects and programmes. You'll have the opportunity to take ownership of diverse, mission-critical project/programmes. Depending on the role, your responsibilities may include: Contributing subject matter expertise in areas relevant to inspection and Quality. Supporting technical assessments using appropriate methodologies. Assisting with the development and validation of Quality methodologies. Participating in experimental trials, improvement activities, and audits. Engaging with stakeholders across AWE and internationally. Preparing and improving inspection instructions, reports, and related documentation. Undertaking other reasonable duties aligned to the role and business needs. We're looking for people with exceptional attention to detail, strong technical understanding, and a passion for maintaining worldclass quality standards in a unique, highly regulated environment. If you enjoy solving complex quality improvement areas and thrive in collaborative, fastpaced settings, we'd love to hear from you. Who are we looking for? Whilst not to be considered a tick list, we'd like you to be able to demonstrate some of the following: Ability to develop solutions in a specialised manufacturing environment. Skilled in interpreting engineering drawings, specifications, and standards. Essential experience programming CMMs, ideally using PCDMIS. Capable of creating and improving inspection documentation. Knowledge of basic quality tools and worldclass manufacturing approaches. Handson workshop experience with inspection tools, techniques, and production processes. Experience reporting product status and managing nonconformance issues. Skilled in managing route cards, nonconformities, concessions, and work permits. Experience with CMMs, surface roughness measurement, or first foundational measurement techniques. You'll need to have the ability to work calmly and constructively in a priority changing environment and be able to manage your own workload. You will also have initiative, enthusiasm, a flexible approach, and ability to work to tight deadlines. Work hard, be rewarded: We ask a lot and set the bar high because our work truly matters. In return we offer balance, with award winning benefits including: 9-day working fortnight - meaning you get every other Friday off work, in addition to 270 hours of annual leave. Market leading contributory pension scheme (we will pay between 9% and 13% of your pensionable pay depending on your contributions). Family friendly policies: Maternity Leave - 39 Weeks Full Pay and Paternity Leave - 4 Weeks Full Pay. Opportunities for Professional Career Development including funding for annual membership of a relevant professional body. Employee Assistance Programme and Occupational Health Services. Life Assurance (4 x annual salary). Discounts - access to savings on a wide range of everyday spending. Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring. The 'Working at AWE' page on our website is where you can find full details in the 'AWE Benefits Guide'. #LI-KT1

Chadwell House Residential Care Home, 372 Chadwell Heath Lane, Romford, Essex, RM6 4YG £13.22 per hour 20 hours per week • Provide a high-quality housekeeping service that helps residents feel comfortable in their home, • Keep bedrooms, communal areas and facilities clean, safe and welcoming, • Work closely with colleagues to support residents’ daily wellbeing, • Use care and attention to detail to make a positive difference to residents’ lives, • Contribute to a supportive, friendly team environment, • A caring, enthusiastic and kind approach with a genuine interest in older people, • Good teamwork skills and a willingness to support colleagues, • Clear communication skills and a flexible approach to your work, • Energy and commitment to making a positive impact each day, • A focus on treating everyone with dignity and respect, • CQC/CI inspection bonus, • Health and wellbeing support – including Aviva Digicare+ with virtual GP appointments, plus an Employee Assistance Programme offering medical, financial, and legal advice, as well as short‑term counselling, • Company‑paid life insurance, • Parental leave arrangements and annual leave purchase scheme, • Company‑funded training and ongoing career development opportunities, including our Team Leader Development Programme, • Flexible working options and an inclusive culture where everyone belongs, supported by our staff networks including PRISM, Disability, Race Equality and Parent networks, • Exclusive retail discounts, Cycle to Work, and salary sacrifice arrangements Inclusion is one of our core values. We’re committed to being a diverse and inclusive organisation where everyone can thrive. We welcome applications from people of all backgrounds and will make reasonable adjustments throughout the recruitment process in line with our Disability Confident employer status. Building Equality and Diversity Sanctuary Group encourages and welcomes applications from people from diverse backgrounds to support our commitment to offering an inclusive environment for our employees and customers. We work closely with the Home Office in order to prevent illegal working. Anenhanced Disclosure and Barring Service check will be necessary in the event of a successful application which we will pay for. Sanctuary Care Limited is a subsidiary of Sanctuary Housing Association, an exempt charity. Job Segment: Housekeeping, Inspector, Healthcare, Quality #J-18808-Ljbffr

Skilled Fine Limit Sheet Metal Worker Aerospace & Defence Manufacturing | Precision Fabrication | Permanent Position A leading aerospace and defence manufacturing business is seeking an experienced Skilled Fine Limit Sheet Metal Worker to join its growing fabrication team. This is an excellent opportunity for a highly skilled fabricator with experience in precision sheet metal work, hand forming, and working with exotic materials to join a well-established engineering business producing high-specification aerospace components. The role will involve manufacturing complex fabricated parts to extremely tight tolerances using a variety of forming, assembly, and finishing techniques. Key Responsibilities Manufacture precision sheet metal components from engineering drawings, sketches, and verbal instructions Carry out bending, forming, cutting, pressing, riveting, assembly, deburring, stretching, and inspection operations Work to tight tolerances across a range of aerospace-grade materials including aluminium, stainless steel, titanium, and Inconel Set and operate fabrication machinery including fly press, brake press, and linishing equipment Hand form prototype panels and precision components from flat sheet material Perform drilling, trimming, grinding, filing, and finishing operations Ensure tooling and jigs are maintained and fit for purpose Inspect completed work to ensure compliance with engineering and quality standards What We’re Looking For Extensive experience within precision sheet metal fabrication Strong background in aerospace, defence, or high-specification manufacturing Experience with hand forming and fine limit sheet metal techniques Ability to read and interpret engineering drawings Experience working with exotic materials including Titanium and Inconel Skilled in fabrication, assembly, and integration of fabricated and machined components Strong attention to detail with the ability to work to extremely tight tolerances A proactive and quality-focused approach Salary & Benefits £38,000 – £48,000 DOE Family-friendly working hours Flexible start and finish times available Shorter working day on Fridays Healthcare contribution scheme Employee Assistance Programme 23 days holiday + bank holidays Life Assurance (4x salary) Company pension contribution On-site parking Long-term career development opportunities Apply Now If you are an experienced Sheet Metal Worker, Aerospace Fabricator, or Fine Limit Fabrication Specialist looking to join a growing and highly respected aerospace manufacturing business, we would like to hear from you. Apply today with your latest CV for immediate consideration

We are working as the internal recruitment partner for our client, a global organisation offering excellence in supply chain solutions to the aerospace industry. Due to continued growth, we are seeking a Quality Technician to join the team. This role offers a fantastic opportunity for someone looking to progress their career within quality, acting as a key link between inspection and engineering, with real scope for development. You will play an important role in ensuring that all aerospace products meet strict quality, regulatory, and customer standards, while also supporting investigations and continuous improvement activities across the business. Responsibilities: Support inspection activities to ensure products meet required standards Review certification and traceability documentation for accuracy and compliance Investigate quality issues and customer complaints, identifying root causes Raise non-conformance reports and support corrective actions Manage quarantine processes for non-conforming materials Program and support inspection equipment for new products Work with internal teams to maintain quality standards and processes Contribute to continuous improvement initiativesThe successful candidate will be able to demonstrate the following: Experience within a quality, inspection, or technical environment Knowledge of AS9100 or AS9120 (desirable) Ability to read and interpret technical drawings Strong attention to detail and problem-solving skills Good communication skills and ability to work across teams Proactive mindset with a willingness to learn and develop IT literacy, including Microsoft Office Strong organisation and time management skillsIn return we are offering: Competitive salary Flexible 38-hour working week (Mon- Thu 8:00-17:00, Fri 8:00-12:00) 25 days' annual leave plus bank holidays and Christmas closure (which increases after 5 years). Private medical insurance (BUPA) Enhanced pension contribution. Hybrid working Company bonus scheme. Life assurance.Interested? Then APPLY now for immediate consideration

Small Tools Fitter – Tool Hire If you are an ambitious and experienced Small Tools Fitter then we have the perfect opportunity for you to join our growing team at First Response. You’ll be responsible for repairing, servicing, and testing a wide range of hire equipment; including electrical, diesel, and petrol-powered tools ensuring everything that leaves our depot is safe, reliable, and ready for our customers. Based at our Rainham depot, this role is ideal for someone with hands-on technical skills who takes pride in delivering quality workmanship and supporting a busy hire operation. How we help you grow At First Response, we believe in developing our people. You’ll work alongside experienced colleagues in a supportive environment where quality, safety, and teamwork come first. We’ll provide ongoing training and opportunities to expand your technical knowledge across our full range of hire equipment. As our business continues to grow, you’ll have every opportunity to grow with it. Small Tools Fitter your responsibilities: • To service, repair & test a range of small tools, • Conduct routine maintenance in line with manufacturers’ recommendations, • Maintain compliance with all industry standards and safety regulation, • Record service and inspection details accurately using our internal IT systems, • Support colleagues with technical advice when required, • Ensure a clean, safe, and organised workshop environment Small Tools Fitter must haves • Experience servicing & repairing electrical, diesel, and petrol-powered tools, • Strong fault-finding and problem-solving skills, • Excellent time management & reliability, • Good written and verbal communication abilities, • IT literate, • Ability to work independently and show initiative, • A strong team ethic and positive attitude, • Full UK Driving Licence (preferable). How we Reward you • Position: Tool Hire Fitter & Tester Salary: £30K - £35k based on experienced, • Benefit: Company Pension Hours: 07:30 – 17:00 (Monday to Friday), • Location: Rainham, Essex

About the opportunity: We are the internal recruitment partner for our client, a global organisation offering excellence in manufacturing solutions for the aerospace market. Are you passionate about precision, quality, and aerospace engineering? Do you thrive in a dynamic manufacturing environment where attention to detail is everything? We're on a mission to deliver excellence and we need a dedicated Mechanical Inspector to help us ensure our products meet the highest standards. Responsibilities: Verifying the conformity of aerospace parts, assemblies, and sub-assemblies to engineering drawings and customer requirements Completing detailed and traceable inspection records Supporting production teams with batch verifications and first-off inspections Compiling First Article Inspection Reports (FAIRs) Performing inspections throughout the manufacturing and supply chain process Reporting and escalating non-conformances, and supporting root cause investigations Actively participating in Continuous Improvement and New Product Introduction meetingsRequirements The successful candidate will be able to demonstrate the following: Ability to read and interpret technical drawings and specifications Solid experience in inspecting precision components Familiarity with inspection tools, CMM equipment, and industry measurement techniques Experience in aerospace or pharmaceutical environments preferred Strong communication and organisational skills Confidence to challenge and escalate quality issues HND or equivalent qualification, with a good grasp of imperial and metric systems would be desirable. Benefits In return we are offering: A competitive basic salary of £32,000 - £40,000 dependent on knowledge and experience plus an enhanced shift premium. 39 hours worked over 4 days (5:00 pm - 3:15 am), additional shift premium paid at time and one-third for hours worked between 6:00 pm and 3:15 am. 23 days holiday pro rata increasing to 26 days after 5 years' service, plus bank holidays. Life assurance scheme. Auto enrolment pension scheme. Employee Assistance Programme. Employee Referral Scheme. Employee Recognition Scheme. Long Service Awards.This role is based within the ULEZ zone. Please note that petrol vehicles registered from 2006 onwards and diesel vehicles registered from 2016 onwards are ULEZ compliant. Interested? Then APPLY now for immediate consideration

Role Overview: We are seeking an experienced and passionate Head of Housekeeping to lead and manage our housekeeping team within a high-quality care home environment. This is a key leadership role responsible for maintaining exceptional cleanliness, infection prevention standards, and creating a warm, welcoming environment for our residents, families, and visitors. You will play a vital part in ensuring the home is always inspection-ready, supporting resident wellbeing, and maintaining compliance with CQC and infection control standards. Key Responsibilities: • Lead, manage and support the housekeeping team, including training, supervisions, appraisals and rota management., • Oversee daily housekeeping and laundry operations to ensure consistently high cleanliness and presentation standards., • Maintain a safe, homely, and inspection-ready environment for residents, visitors and staff., • Ensure full compliance with infection prevention & control, COSHH, health & safety, and CQC standards., • Carry out environmental audits, risk assessments, and drive quality improvement actions., • Work collaboratively with the Home Manager, clinical and maintenance teams., • Manage housekeeping stock, equipment and departmental budget., • Promote dignity, person-centered care and a positive experience for residents and families. We are looking for: • A confident Head of Department experience in housekeeping within healthcare, hospitality or care setting., • Passionate about delivering high standards and excellent customer service., • Knowledgeable in cleaning, infection control, safeguarding and health & safety., • Reliable, professional and compassionate., • Proficient in Microsoft Office Suite Please Note: • This job description is not an exhaustive statement of the job. Other duties may need to be undertaken commensurate with this position., • This is not a sponsorship role

Skilled Fine Limit Sheet Metal Worker Aerospace & Defence Manufacturing | Precision Fabrication | Permanent Position A leading aerospace and defence manufacturing business is seeking an experienced Skilled Fine Limit Sheet Metal Worker to join its growing fabrication team. This is an excellent opportunity for a highly skilled fabricator with experience in precision sheet metal work, hand forming, and working with exotic materials to join a well-established engineering business producing high-specification aerospace components. The role will involve manufacturing complex fabricated parts to extremely tight tolerances using a variety of forming, assembly, and finishing techniques. Key Responsibilities Manufacture precision sheet metal components from engineering drawings, sketches, and verbal instructions Carry out bending, forming, cutting, pressing, riveting, assembly, deburring, stretching, and inspection operations Work to tight tolerances across a range of aerospace-grade materials including aluminium, stainless steel, titanium, and Inconel Set and operate fabrication machinery including fly press, brake press, and linishing equipment Hand form prototype panels and precision components from flat sheet material Perform drilling, trimming, grinding, filing, and finishing operations Ensure tooling and jigs are maintained and fit for purpose Inspect completed work to ensure compliance with engineering and quality standards What We're Looking For Extensive experience within precision sheet metal fabrication Strong background in aerospace, defence, or high-specification manufacturing Experience with hand forming and fine limit sheet metal techniques Ability to read and interpret engineering drawings Experience working with exotic materials including Titanium and Inconel Skilled in fabrication, assembly, and integration of fabricated and machined components Strong attention to detail with the ability to work to extremely tight tolerances A proactive and quality-focused approach Salary & Benefits £38,000 – £48,000 DOE Family-friendly working hours Flexible start and finish times available Shorter working day on Fridays Healthcare contribution scheme Employee Assistance Programme 23 days holiday + bank holidays Life Assurance (4x salary) Company pension contribution On-site parking Long-term career development opportunities Apply Now If you are an experienced Sheet Metal Worker, Aerospace Fabricator, or Fine Limit Fabrication Specialist looking to join a growing and highly respected aerospace manufacturing business, we would like to hear from you. Apply today with your latest CV for immediate consideration. TPBN1_UKTJ

Night Shift Quality Inspector Aerospace Manufacturing | Permanent Late Shift | Monday–Thursday A leading precision engineering and aerospace manufacturing business is looking to recruit an experienced Night Shift Quality Inspector to join their growing Quality team. This is an excellent opportunity for a skilled inspector with experience in precision components, engineering drawings, FAIRs, and dimensional inspection to join a well-established business supplying high-specification products into demanding industries. Working on a permanent late shift, you’ll play a key role in ensuring all products meet engineering, customer, and quality standards across manufacturing and supply chain operations. Shift Pattern Monday – Thursday 5:00pm – 3:15am Permanent late shift Shift premium included Key Responsibilities Carry out inspection of parts, assemblies, and sub-assemblies against engineering drawings and customer specifications Complete inspection documentation with full traceability and compliance Support production with first-off inspections and batch verification Produce and compile FAIRs (First Article Inspection Reports) Conduct goods inward inspection activities Identify and report non-conformances in line with company procedures Support root cause analysis and corrective actions Escalate quality concerns where required Ensure compliance with quality and HSE procedures at all times What We’re Looking For Previous experience within Quality Inspection in a precision engineering or manufacturing environment Ability to read and interpret engineering drawings Experience using inspection gauges and measuring equipment CMM experience preferred FAIR / First Article Inspection experience Knowledge of geometric tolerancing, imperial and metric measurement systems Strong understanding of quality standards and inspection processes Aerospace experience advantageous but not essential ERP / MRP experience desirable (Javelin beneficial) Knowledge of SPC, MSA, NDT, ISO or ASME standards advantageous Salary & Benefits £36,000 – £45,000 including shift premium Permanent 4-day working week 23 days holiday + bank holidays & increases with service Healthcare scheme Employee Assistance Programme Life Assurance (4x salary) Company pension contribution On-site parking Long-term career development opportunities Apply Now If you are an experienced Quality Inspector, Mechanical Inspector, or CMM Inspector looking for a long-term opportunity within a growing aerospace manufacturing business, we would like to hear from you. Apply today with your latest CV for immediate consideration

Graduate Structural Engineer Are you a Graduate Structural Engineer, qualifying this year or last year, who is looking for a progressive and exciting career opportunity Are you ambitious to progress in the industry Do you excel in the act of producing great designs and relish the completion of the detail, and supporting documents in the process Do you want to join an established business and be an important cog in their growth plan Our client is an Essex-based, Building Design Consultants, who work mostly in the commercial market with developers and contractors. They are seeking an office-based, enthusiastic and proficient Graduate Structural Engineer to support the Architects in the business. Someone who is a highly detailed individual and IT proficient. This is an important role, and you will be part of a growing team who are focused on getting the business to the next level. This role is suitable for people who already have a Work Permit, or do NOT require one. No sponsorship is available for this role. Salary and Hours: £28,000 to £35,000 subject to grades and specific work experience An office-based role, located on the 1st floor Full Time – 37.5 hours Benefits Our Client Offers: Annual profit-related Bonus Scheme Group Life Assurance Employee Assistance Programme (EAP) Bereavement Counselling and Probate Helping Service Group Personal Pension Healthcare insurance Career growth opportunities Training provided Team events Sick Pay Cover Position Purpose Working within a team of Engineers and Technicians, and under the supervision of the Project Manager / Owner. As a Graduate Engineer you are expected to deliver assigned tasks and provide technical support, working towards the overall successful delivery of technically challenging designs. Duties and Responsibilities: Develop technical and management skills through ongoing study of design standards, codes, and guidance. Demonstrate understanding of technical concepts. Gain proficiency in BDC systems and procedures. Comply with Health, Safety and Welfare regulations and promote team awareness. Undertake continual professional development through practical experience and self-study. Work towards Chartered Membership (ICE / IStructE). Assist in resolving technical issues. Communicate regularly with project teams, providing progress updates. Prepare and assist in compiling project documentation. Review and check own work. Coordinate with external parties (Architects, Engineers, Surveyors, utilities). Attend meetings, carry out site visits / investigations, and assist with inspection reports. Understand project programmes and resource planning. Manage delivery of assigned outputs to time and quality standards. Prepare and present information internally. Manage small tasks and projects. Carry out complex structural calculations and design work. Develop and interpret analytical models using relevant software. Prepare clear and structured calculation reports. Mark up and review reinforcement drawings. Review structural drawings to ensure alignment with design assumptions. Check third-party information for consistency with design and mark-ups. Undertake any other reasonable duties. Results Expected: Completion of quarterly training reports and maintenance of CPD records demonstrating progress towards Chartership. Ongoing achievement of performance goals, with developing analytical skills and knowledge of codes, standards, and compliance requirements. Progression towards Engineer / Senior Engineer level over a 3 – 4-year period. Standards To Be Met: Demonstrate commitment to personal development by supporting on-the-job training with wider CPD study and background reading. Adhere to BDC’s core values of People, Performance, Partnership, and Pride. Maintain punctuality. Knowledge, Skills and Abilities: Strong understanding of structural mechanics. Working knowledge of Eurocodes. Proficient in sketching and drawing. Competence in Microsoft Office suite. Effective report writing skills. Strong communication skills, both written and verbal, including phone and face-to-face interaction. If you want to join an established, privately owned business and be a catalyst for their future growth, then this is the job for you. Their selection process is unique in the marketplace and attracts motivated, productive team members who they know will be successful and have a great career with themselves. They look forward to hearing from you. Don't miss this opportunity. Start your application NOW

Test & Run Technician / Pat Tester We have an excellent opportunity for a motivated and experienced Test & Run Technician / PAT Tester to join the growing team at First Response. As a Test & Run Technician you will use your technical expertise to inspect, test, and prepare a wide range of electrical small tools, ensuring they meet our high standards, before being added to our hire fleet. Working closely with our hire desk team, you will demonstrate strong communication skills and a willingness to provide support whenever required. As a Test & Run Technician you will have strong hands-on skills, a methodical and analytical approach, and take genuine pride in maintaining and testing equipment to a consistently high standard. Your opportunity to grow with us At First Response, we believe in developing our people. You’ll work alongside experienced colleagues in a supportive environment where quality, safety, and teamwork come first. We’ll provide ongoing training and opportunities to expand your technical knowledge across our full range of hire equipment. As our business continues to grow, you’ll have every opportunity to grow with it. Test & Run Technician / Pat Teste your responsibilities • Service, repair, and test a variety of tool hire equipment prior to going out on hire., • Provide routine maintenance in line with manufacturers’ recommendations., • Maintain compliance with all industry standards and safety regulations, including HSE., • Accurately record service, inspection, and testing details using internal systems., • Provide technical support and advice to colleagues when required., • Maintain a clean, safe, and well-organised workshop environment., • Be a valued member of the fitting team and wider First Response operation. Test & Run Technician / Pat Teste Must Haves • Previous experience working as a Test & Run Technician or PAT Tester., • Strong fault-finding and problem-solving skills., • Good written and verbal communication., • Excellent time management & Reliability., • Computer literacy for completing service records and system updates., • Full UK Driving Licence (preferable)., • Ability to work independently and show initiative. How we Reward you. • Position: Test & Run Technician/PAT tester Salary: £20 - £30k based on experience, • Benefits: Company Pension Hours: 07:30 – 17:00 (Monday to Friday), • Location: Rainham, Essex