Thermal jobs in HitchinCreate job alerts

We are currently on the look out for a number of AIT Engineers to work on two sites based in Oxford or Stevenage. Below is a list of positions we need and a brief overview of each role. If you are interested, please state in your application which role you would like to be considered for. All roles will require SC clearance and due to the nature of the roles the will be onsite, UK Eyes Only. AIT Electrical Test Operations Engineer Location: Stevenage and Oxford (Onsite, UK Eyes Only) Clearance: SC Required Rate: £37.00/hr (Umbrella, Inside IR35) Hours: 37 per week Shift Pattern: Up to 24/7 rotation, including weekends Initial Base: Stevenage, transitioning to RAL NSTF, Oxfordshire in March 2026 Role Overview The AIT Electrical Test Operations Engineer plays a key role in the preparation, execution, and analysis of electrical and functional testing for spacecraft and engineering test benches. Operating within a cleanroom environment, the engineer ensures that spacecraft systems meet stringent performance and safety standards ahead of environmental testing and launch campaigns. Key Responsibilities Core Activities • Executes electrical and functional test procedures on engineering test benches and flight spacecraft., • Utilises the Central Checkout System (CCS), Electrical Ground Support Equipment (EGSE), and Spacecraft Check-Out Equipment (SCOE)., • Validates electrical test aids, breakout boxes, cables, and related hardware., • Updates test procedures, raises work orders, and produces comprehensive test reports., • Supports the development and debugging of Automated Test Procedures (ATP) using a bespoke high level software language., • Contributes to electrical integration and testing at unit, subsystem, and full spacecraft level., • Provides electrical test support during environmental testing and launch activities., • Assists in the design and manufacture of electrical test aids, including drawings, manufacturing packs, and procurement oversight., • Supports departmental operations such as calibration recall, test campaign logistics, and export rating tasks. Knowledge & Experience • Proficient with electrical and RF test equipment including DMMs, oscilloscopes, signal generators, current probes, power meters, network analysers, and data bus monitors., • Competent in preparing technical documentation; experience with Digital Design and Manufacturing Systems (DDMS) is advantageous., • Familiarity with updating CCS test sequences or scripts is beneficial., • Strong understanding of spacecraft electrical systems and harnessing., • Awareness of spacecraft subsystems such as Data Handling, AOCS, Power Systems, Thermal Control, and communication buses (1553, Space Wire)., • Experience with programming or scripting languages for automated test sequences is advantageous., • Comfortable working in both Windows and Linux environments., • Knowledge of cleanroom protocols., • Willingness to support shift work and UK travel for test campaigns. Essential Skill Set • Experience in electrical integration on test benches or spacecraft., • Confident use of a wide range of electrical test equipment and test racks., • Ability to execute and make minor updates to CCS test sequences/scripts., • Strong electrical faultfinding and test debugging capability., • Experience supporting environmental and launch test campaigns., • Skilled in updating test procedures, writing work orders/plans, producing test reports, and supporting test and nonconformance reviews., • Minimum qualification: HNC or NVQ Level 4 in an Electrical Engineering discipline, or >5 years of relevant experience. Satellite AIT EGSE Engineer Location: Onsite (UK Eyes Only) Clearance: SC Clearance Required Rate: £45.00 per hour (Umbrella, Inside IR35) Hours: 37 per week Step into a role at the heart of spacecraft innovation. As a Satellite AIT EGSE Engineer, you’ll be the technical authority behind the electrical ground support equipment that powers spacecraft build, integration, and test. This is your chance to work on mission critical systems, solve complex engineering challenges, and directly contribute to the success of space missions. What You’ll Be Doing You’ll take ownership of the electrical test racks and EGSE systems that keep spacecraft development moving. Your day to day will include: • Maintaining, validating, and faultfinding on advanced electronic and RF test racks, • Administering and configuring computer systems and networks across Windows and Linux environments, • Setting up and securing local networks, including firewall configuration, • Supporting environmental and launch test campaigns, • Preparing test specifications, reviewing supplier data packs, and contributing to design reviews, • Ensuring EGSE systems are mission ready through routine maintenance and continuous improvement, • This is a hands on, high impact engineering role where your expertise directly influences spacecraft performance and reliability. What You Bring Essential Skills • Degree in Electrical Engineering (or equivalent experience, 5+ years), • Strong theoretical and practical knowledge of electronic and RF test racks, • Proven faultfinding ability down to board/component level, • Confident administering networks and computers (Windows & Linux), • Solid documentation skills for procedures, reports, and technical notes, • Familiarity with interfaces such as Mil1553, Space Wire, CAN bus, RS232/422, • Experience with ATE environments (PCI, VXI, PXI), • Competence with general-purpose lab test equipment, • Experience designing, manufacturing, or commissioning test systems, • Willingness to support shift work and overseas test campaigns Desirable Skills • Experience integrating electrical systems on spacecraft, • Knowledge of TMTC databases, • Ability to write test sequences/scripts for spacecraft systems (including FDIR), • Background in environmental or launch test campaigns, • Strong Linux/Unix skills, especially bash scripting, • Programming experience in C, Java, Python, TCL, or VBA Electrical Systems Test Engineer – Satellite AIT An opportunity to shape the performance and reliability of nextgeneration spacecraft Location: Onsite (UK Eyes Only) Clearance: SC Clearance Required Rate: £55.00 per hour (Umbrella, Inside IR35) Hours: 37 per week Role Overview This role places the Electrical Test Engineer at the center of satellite Assembly, Integration & Test (AIT). The engineer will design, develop, and execute complex electrical and functional test sequences that ensure spacecraft are fully prepared for the challenges of launch and the space environment. They will work hands on with flight hardware, support live test operations, investigate anomalies, and contribute to the technical reviews that determine spacecraft readiness. This position is ideal for someone who thrives on precision, problem solving, and the excitement of seeing their work contribute directly to a mission in orbit. Reports to: Satellite AIT Electrical Test Engineering Manager Works with: AIT EGSE engineers, Functional Verification engineers, Quality teams, Design and Operations architects, AIT management, CADM Key Responsibilities Test Development & Execution • Interpret electrical and functional test requirements from detailed specifications., • Develop, debug, and execute automated test sequences using high level languages and bespoke spacecraft checkout systems., • Prepare and run complex test procedures on flight spacecraft and test benches., • Provide firstline technical support to operations teams during live spacecraft testing. Technical Investigation & Review • Support anomaly investigations and contribute to Non-Conformance Review Boards (NRBs)., • Participate in major project reviews including Test Readiness Reviews, Post Test Reviews, and Test Review Boards., • Produce clear, comprehensive test reports and documentation. Environmental & System Testing • Support spacecraft functional and performance testing during environmental campaigns such as TVAC, magnetic, and EMC testing., • Assist in spacecraft system investigations and follow up actions from review boards. Quality & Standards • Work in accordance with company procedures, quality standards, and cleanroom disciplines., • Collaborate with multidisciplinary teams to enhance test coverage and reliability. Skills & Knowledge Technical Expertise • Experience writing spacecraft test sequences/scripts for Central Checkout Systems (CCS)., • Knowledge of scripting or programming languages (e.g., Elisa, Java, C, Python, TCL, VBA). 1553 and SpaceWire communications Attitude & Orbit Control Systems Power systems, batteries, solar arrays Thermal control and FDIR • Familiarity with Linux/Unix and Windows environments., • Competence with electrical test equipment (oscilloscopes, DMMs, current probes, data bus analysers)., • Awareness of systemlevel testing and verification processes. Experience • Developing and debugging spacecraft system test sequences, including FDIR., • Supporting environmental and launch test campaigns., • Investigating electrical/system faults and resolving test anomalies. Education & Background • Degree in Electrical Engineering or a related discipline OR, • 5+ years of relevant experience in spacecraft, avionics, or complex electronic systems testing, • Experience within the space or aerospace sector is highly beneficial Security Requirements The successful candidate must be a UK National and able to obtain SClevel security clearance prior to starting.

A fantastic opportunity has arisen for a Principal Stress Engineer to join a specialist Mechanical Analysis function to support the structural design and development of a next-generation complex weapon platform. This role performs the duties of a senior structural analysis lead and reports into the Mechanical Analysis leadership team, working closely with multi-disciplinary engineering teams across multiple UK sites. Key Responsibilities: • Lead the structural design and development of advanced aerospace structures across the full product lifecycle, • Deliver and oversee structural and thermal analysis activities from early concept through detailed design, qualification, manufacture and in-service support, • Plan, estimate and manage multiple structural analysis work packages to time, cost and quality, • Apply classical hand calculations alongside advanced CAE techniques, including static, dynamic, fatigue, non-linear, impact and kinematic analysis, • Support qualification and design testing activities, including fault investigation and loads derivation, • Prepare and present clear, comprehensive technical reports to a range of stakeholders, including senior management, • Collaborate closely with multi-disciplinary teams to deliver integrated engineering solutions, • Mentor and technically support junior engineers, promoting best practice and professional development, • Actively contribute to the development and improvement of analysis methods, tools and processes The ideal candidate would have: • Strong experience in structural analysis within an aerospace, defence or similarly regulated engineering environment, • Proven capability in leading and delivering complex analysis activities using both hand calculations and CAE tools, • Experience with CAE modelling tools (HyperWorks desirable), • Exposure to a broad range of structural disciplines including static, dynamic, fatigue and non-linear analysis, • Composite stress analysis experience (desirable), • Confidence presenting technical findings and recommendations to varied audiences, • A proactive mindset with a passion for continuous improvement and technical excellence The ideal candidate must have: • A degree in a relevant engineering or scientific discipline, or significant equivalent industry experience, • Demonstrated experience planning, estimating and owning structural analysis work packages, • Excellent written and verbal communication skills, • The ability to work independently and as part of a multi-disciplinary team, • A strong problem-solving approach with the confidence to take technical responsibility, • Willingness to obtain and hold UK security clearance (DV desirable) This position offers a lucrative benefits package, which includes but is not inclusive of: • Bonus scheme (based on company performance), • Annual pay reviews and promotion reviews (based on personal performance), • Overtime paid at an enhanced rate, • Flexi-Leave (of up to 15 days), • Pension scheme (total contribution of up to 14%), • Subsidised site facilities and restaurants, • Free parking, • Excellent career progression and training / career development opportunities If this role looks like your next challenge, please contact Keelan ASAP or apply via this advert! Please note that due to the nature of the client’s business, only candidates who currently hold full British Citizenship (without limitations) / Dual Nationality (inclusive of British Citizenship) will be considered. We endeavour to reply to every candidate, every time, but if you haven’t heard back within 10 days, please understand that you have unfortunately been unsuccessful for this position, or the position has been filled. Please call the office or send an email to discuss other potential positions.

Principal Stress Engineer Stevenage – 3 days pw on site SC Clearance is required for this role Copello are working with a defence client who are looking for an experienced Stress Engineer, due to increased workload. Your role would to be to lead the structural design and development of a next generation complex defence platform. You will collaborate closely with multi-disciplinary teams across our UK sites to develop an advanced structural solution. The opportunity: The client deliver structural and thermal analysis expertise across the whole product lifecycle from studies in the early concept stage and detailed development of engineering designs to manufacturing concessions and in-service support. What we're looking for from you: * Degree qualified in a relevant engineering / science discipline or have significant experience in a relevant field (e.g. Mechanical, Aerospace, Structural Analysis etc.). * Proven experience in estimating, planning, leading and delivering a variety of structural analysis work packages, using both classical hand calculation methods and CAE tools (Hyperworks desirable). * Demonstrated ability in preparing and presenting comprehensive technical reports, conveying complex findings and recommendations to stakeholders, including senior management. * Proactive and passionate about developing and improving methods, processes and tools. * Able to mentor and support junior ...

World Class Defence Organisation based in Stevenage, Hertfordshire is currently looking to recruit a Principal Thermal Engineer Subcontractor on an initial 12 month contract. Hourly Rate: £50.00 Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Stevenage Hybrid / Remote working: The role will likely be onsite 3 days per week. Duration: 12 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella) Interview process: One stage onsite interview Principal Thermal Engineer Job Description: The Mechanical Analysis Group are looking for a Principal Thermal Engineer to join its team in Stevenage. The group consists of over 30 engineers working across a wide spectrum of cutting-edge military systems. Working for an internationally recognised company, you will play a critical role in ensuring that products deliver the necessary performance against key thermal requirements. Responsibilities: Take ownership for delivering packages of thermal analysis work. Provide mechanical analysis support to develop designs and deliver thermal performance evidence. Deliver analysis evidence in clear reports with firm conclusion statements. Participate in team meetings and design reviews. Manage workload against time schedules and report progress regularly to stakeholders. Respons...

RF Designer Defence Systems (CW)Location: UK | On-site | Defence Engineering Our client, a long-standing partner to the UK Ministry of Defence, is seeking an RF Designer to support the research, design, and testing of advanced radio-frequency technology for integration into complex weapons systems. This role requires strong hands-on RF design experience, with the ability to modify existing designs and produce rapid prototypes to support programme delivery. Key Responsibilities • Research, design, and test RF circuits for defence applications, • Produce and modify RF designs to support system integration, • Develop and prove RF designs through laboratory testing and trials, • Interface with Datalink core teams, Design Authority, and engineering stakeholders, • Ensure RF designs integrate effectively across wider system architecture, • Practical RF component-level design and test experience across 30?MHz30?GHz, • Experience designing LNAs, HPAs, filters, oscillators, synthesisers, modulators, • RF design for harsh environments (EMC, vibration, thermal), • Hands-on use of RF test equipment (Spectrum Analysers, VNAs, Power Meters), • Strong practical skills including soldering and fault-finding, • Knowledge of digital, analogue, and power supply design, • Experience with RF design tools (e.g. Microwave Office), including layout JBRP1_UKTJ

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of: Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. Read more about us ___. The Role: This role will be a part of our Saab Seaeye business in Fareham. In this role you will take responsibility for the full-lifecycle design and development of bespoke power conversion and transmission solutions in line with the company's business needs through innovation, creativity and professionalism. As Lead Engineer you will act as Technical Authority for concurrent power projects: from in-house designs to outsourced specification and management. Key Responsibilities: The role seeks an engineer with excellent knowledge of power architectures, transmission, conversion and distribution, whilst having an appreciation for the real-world subtleties involved in creating robust and reliable power systems. You may be working on anything from large-scale power conversion products, efficient cabled transmission designs all the way through to motor drives and low voltage converters. Our voltages range from 24V to 5000V with powers from 500W to 250kW. You will be responsible for the successful design, implementation and delivery into our products. This may include technically leading small multi-disciplinary teams and therefore the candidate must show an aptitude for directing and coordinating project activities and have strong communication/interpersonal skills. A product-focussed mindset is essential: taking a view across the different engineering disciplines to deliver the most appropriate solution. Our products provide unique challenges in designing non-conventional solutions which can meet size, weight and efficiency demands. Qualifications and Skills: Essential: • Significant Experience in Power Electronics, • Full-lifecycle experience: from concept to tested solution, • Self-starter: taking the lead and having a proactive mindset, • Excellent theoretical knowledge backed up by proven hands-on experience, • Proven knowledge of power transmission: AC and DC, applied to multi-km cabled solutions, • Proven Knowledge of DC converter topologies: Buck/Boost/Flyback/LLC/Full-Bridge, • Proven Knowledge of AC converter techniques: single phase/multiphase, power factor correction, • Experience of power converter product design AC-DC, DC-DC and DC-AC inverters, • Experience working with power switching devices: MOSFET, IGBT, SiCFET, GaNFET and associated drive circuitry, • Experience working with voltages up to 5kV and multi-kW powers, • Experience in designing or specifying custom transformer and magnetic components, • Experience using modelling and simulation packages, • Experience in both digital and analogue design concepts, • Experience of filter design and implementation, • Experience designing/specifying control systems for power conversion, • Knowledge of thermal management techniques, • Knowledge of design-for-compliance, • Experience developing requirements specifications and test procedures, • High Voltage Experience up to 5kV, • Thermal modelling experience, • Motor design principles and control techniques

Reference Code: -en_GBContract Type: PermanentProfessional Communities: Products & Systems Engineering • Lead thermal design and analysis activities for spacecraft subsystems and components., • Develop and validate thermal models using ESATAN-TMS., • Define thermal control strategies including passive and active systems (e.g., MLI, heat pipes, radiators, heaters)., • Support thermal testing activities from component-level through full spacecraft assembly., • Support thermal environmental qualification testing (TVAC), including test planning and data review., • Support proposal development and technical reviews (PDR, CDR, TRR)., • Ensure compliance with mission requirements, standards, and customer specifications., • Collaborate with cross functional teams, including avionics, mechanical, propulsion, and systems engineering teams to ensure seamless integration., • Manage and provide mentorship to junior engineers and foster technical excellence across the team., • Responsible for maintaining documentation, including design specifications, test plans, performance reports and ICDs., • Bachelor’s or Master’s degree in Aerospace Engineering, Mechanical or Thermal Engineering, or related field., • Experience in thermal engineering within the space industry., • Proficiency in thermal analysis software and CAD tools, especially ESATAN-TMS., • Strong understanding of space thermal environments and heat transfer mechanisms., • Experience with thermal testing and instrumentation., • Knowledge of thermal coatings and materials for space applications., • Experience with flight hardware development and qualification., • Excellent problem-solving, communication, and documentation skills., • Exposure to top global companies working with Capgemini (145 of the Fortune 500 companies), • Open access to digital learning platforms, • Active employee networks promoting diversity, equity and inclusion like OutFront, CapAbility or Capgemini is proud to be a ___ under the UK Government’s Disability Confident scheme. As part of our commitment to inclusive recruitment, we will offer an interview to all candidates who: • Declare they have a disability, and, • Meet the minimum essential criteria for the role., • Please opt in during the application process. Capgemini. Make it real. • All roles will require a level of security clearance; BPSS OR Security Clearance OR Developed Vetting., • Location: Work from the Stevenage site at least 3 days a week, • You can bring your whole self to work. At Capgemini building an inclusive future is part of everyday life and will be part of your working reality. We have built a representative and welcoming environment, for everyone. Capgemini is an AI-powered global business and technology transformation partner, delivering tangible business value. We imagine the future of organisations and make it real with AI, technology and people. With our strong heritage of nearly 60 years, we are a responsible and diverse group of over 420,000 team members in more than 50 countries. We deliver end-to-end services and solutions with our deep industry expertise and strong partner ecosystem, leveraging our capabilities across strategy, technology, design, engineering and business operations. The Group reported 2025 global revenues of €22.5 billion. Make it real |

Proven experience with thermal modelling and analysis tools. Experience leading thermal design for flight hardware. You will take ownership of the complete thermal system architecture for spacecraft and satellite programmes.

Lead thermal design and analysis activities for spacecraft subsystems and components. Define thermal control strategies including passive and active systems (e. Bachelor’s or Master’s degree in Aerospace Engineering, Mechanical or Thermal Engineering, or related field.

Lead thermal design and analysis activities for spacecraft subsystems and components. Experience in thermal engineering within the space industry. Proficiency in thermal analysis software and CAD tools, especially ESATAN-TMS.

Strong grounding in heat transfer and thermal analysis. Background analysing thermal performance of mechanical or electronic systems.

A leading defence organisation is seeking a Lead Thermal Engineer in Stevenage.

Proficiency in thermal analysis software and CAD tools, especially ESATAN‑TMS. Define thermal control strategies including passive and active systems (e. Support thermal environmental qualification testing (TVAC), including test planning and data review.

A leading aerospace company in the UK is seeking an experienced Thermal Engineering Analyst to provide technical leadership for thermal analysis processes. Ideal candidates should have strong problem-solving skills and advanced knowledge of thermal analysis techniques and software tools. The role in

Develop and validate thermal models using ESATAN-TMS. Support thermal environmental qualification testing (TVAC), including test planning and data review. Experience in thermal engineering within the space industry.

Are you looking to broaden your experience or take the next step in your career? Do you have the drive and ability to deliver your expertise across multiple, technically challenging activities? The creativity and personality to work with others to derive solutions to thermal problems in cutting‑ed

This role involves ownership of thermal system architecture for spacecraft, leading thermal modelling efforts, and ensuring mission success in harsh space conditions. A global engineering consultancy is seeking a Thermal Space Engineer Lead in Stevenage.

From our commitment to zero-carbon flight () to ,We are seeking an experienced Thermal Engineering Analyst to join our Thermal Group in Stevenage to focus on technical leadership and practical engineering engagement across a diverse range of projects, including Earth Observation, Navigation, Scienti

A leading engineering firm in the UK is seeking a Lead Thermal Engineer in Stevenage.

Join Premier Foods - where people, brands and purpose come together. At Premier foods we believe in inclusion, authenticity and individuality. Knowledge of thermal processing/preservation in ambient foods.

Proven experience with thermal modelling and analysis tools. Experience leading thermal design for flight hardware. You will take ownership of the complete thermal system architecture for spacecraft and satellite programmes.

A leading engineering and technology consultancy is seeking a Thermal Space Engineer Lead to join their team in Stevenage. You will define and validate thermal control strategies for spacecraft and satellite programmes, ensuring mission success in extreme environments.

Role: Senior Mechanical Design Engineer Location: Hertfordshire, Hybrid Job Type: Permanent, Full Time, Part Time Salary: £45,000 to £55,000 depending on experience Our client is looking for experienced Senior Mechanical Design Engineers to join their Mechanical Engineering team. Multiple opportunities are available across the entire product life cycle, from early concept development through detailed design, qualification, production and in-service support. In this role, you will lead the development of mechanical solutions for complex defence systems, working with multidisciplinary teams across engineering, manufacturing, quality and supply chain. This is an excellent opportunity for engineers who want to take technical ownership, influence design decisions, and work on highly complex products within a leading defence organisation. The Role As a Senior Mechanical Design Engineer, you will: Lead mechanical design work packages on complex defence systems Develop innovative mechanical solutions from concept through to production and support Provide technical leadership within multidisciplinary project teams Ensure designs meet performance, safety, cost and schedule requirements Drive design maturity and design assurance activities Collaborate with manufacturing, quality, and supply chain teams Act as a key technical interface with internal stakeholders and external partners Support design verification, qualification and testing activities Mentor and support less experienced engineers What We’re Looking For Degree, HND or HNC in Mechanical Engineering (or equivalent experience) Strong experience leading mechanical design activities within multidisciplinary teams Experience working across the full product life cycle Knowledge of design verification, proving and qualification processes Hands-on experience with engineering design methodologies such as DFMEA / DFA / DFM Strong communication skills with the ability to influence technical decisions Experience working with suppliers and external partners Ability to manage priorities, assess risk and support junior engineers Understanding of structural, thermal or dynamic analysis (desirable) Experience with 3D CAD / CAE tools (training provided on internal systems) Benefits Annual company bonus Pension contributions up to 14% Paid overtime opportunities Flexi Leave Flexible working options Healthcare Cash Plan Excellent site facilities

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. The Luton Engineering & Technology team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems, transparencies and coatings, and specialist structures for both civil and defence applications. Were looking for a Principal Materials Engineer with a strong non-metallic materials engineering background, to join our materials and test team to support the production and development of next generation composite aero structures, ice protection and transparency products. The role will be based in the Materials, Coatings and Test (MCT) team within the wider Engineering and Technology department and report to the Functional Team Leader. The role as a Principal Materials Engineer will support the business and engineering team, with non polymer materials science and processing knowledge and guidance. The role will provide a deep understanding of the interactions between processing parameters and material properties of composites, Acrylics, Polycarbonates and adhesives, being able to guide and make decisions on new technology test plans and current production deviations. There will be occasional travel, national and international, required to support customer visits and other GKN sites. You will also support the work of the business to establish safe working practices and necessary level of documentation. You will be involved with projects from the planning / assembly / instrumentation / commissioning phase though to successfully performing and reporting the test. You will also be responsible for providing specialist support to existing programmes within your field of expertise, helping to resolve manufacturing issues and supporting continuous improvement efforts. You will have a proven track record of leading and delivering technical work, with strong communication skills being confident working with a broad range of internal and external stakeholders, including non-technical audiences. Job Responsibilities Development of manufacturing processes in relation to polymer, composite and adhesive materials Qualification of materials and processes to assure they comply with the requirements Assessment of deviations from the specified materials and processes requirements to assure continued airworthiness Support operational and development programs to enable and deliver zero defect projects utilizing engineering and problem solving skills. Accountable for delivering robust, manufacturing process technologies as applied to materials, tooling, part fabrication and assembly. Promote GKNs technical capability globally to the broader technical eco-system, including customers, suppliers and steering groups. Collect inputs, related to a task and take it through an identified process to produce an output / deliverable adhering to quality and schedule requirements. Coordination/project lead for REACh activities: identification of arising issues regarding the REACh legislation, providing support and advice locally and to other GKN sites concerning the impact of REACh. Preparing and defining tests/test plans; critical and systematic interpretation and analysis of test data, applying the outcome of tests for substantiation of specification changes. Troubleshooting and production support on Materials Issues (e.g. Composites, polymers, bonding, surface treatments). Maintaining contacts with suppliers regarding alternative/new products. Contribute to the development of GKN as a 'great place to work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Composite or Polymer Materials Science based Degree (or related) Experience in Polymer and Composite material science and processing; familiarity with REACh environmental legislation Significant relevant experience within an industrial engineering discipline, preferably within an Aerospace/Automotive/Marine/Energy sectors Experience with quality systems, specifications, standards, etc. with the ability to oversee the broader field Excellent reporting and project management skills Good English language, both verbally and in writing, Desirable: Ability to plan work through formal project management processes, including scheduling and budgeting and lead a team to ensure successful delivery of required outcomes. An awareness of aerospace certification requirements. A higher degree qualification such as a Masters, PhD or EngD within Aerospace/Automotive/Marine/Energy sectors The successful candidate should have a broad interest in non-metallic material technologies & testing and characterisation techniques. You should want to mentor people in a technical environment. Youll be able to adapt to changing priorities to meet business priorities handling multiple enquires at once. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal and external stakeholders, including operations and other business functions. The successful candidate should be adaptable in their approach to work, and be able to adapt to potentially dynamic priorities. As a Principal Materials Engineer , the candidate will be naturally curious and seek to increase/deepen their own technical knowledge through study, collaborative working, hypothesis testing and experimentation. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

World Class Defence Organisation based in Stevenage, Hertfordshire is currently looking to recruit an RF Design Engineer subcontractor on an initial 12 month contract. This role would suit a candidate who comes from a strong background working as an RF Designer, Microwave Design Engineer or RF Systems Engineer. Any previous experience of Advanced Design System (ADS) or Cadence would be great. Hourly Rate: £75ph (Umbrella) Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) RF Design Engineer Job Description: The successful candidate will be the designer for specific RF electronics designs. Interfaces to various stakeholders, such as the Datalink core team, Design Authority and other functional entities will need to be managed effectively to ensure the designs are delivered in a timely manner and will integrate to the other parts of the system Responsibilities: The role is substantially technical and hand on testing and proving is essential. Collaborative working with other functions, in particular Software & Firmware Engineering, Mechanical Engineering, Production and Future Systems. Responsibilities: The role is substantially technical and hand on testing and proving is essential. Collaborative working with other functions, in particular Software & Firmware Engineering, Mechanical Engineering, Production and Future Systems. Skillset/experience required: Any previous experience of Advanced Design System (ADS) or Cadence would be great. Individuals will be able to demonstrate a significant number of the following attributes: Proven relevant RF electronics design experience (likely to be the design of 3 or 4 complex RF electronic items using the latest technologies), preferably for harsh environments (EMC, Vibration, thermal). Can guide the design implementation of RF Electronics Receiver / Transmit amplifier chains, filters and frequency synthesisers over the 30Mhz to 30GHz range. Software Defined Radios of good advantage. Knowledge and proven best practice design of power supplies and digital interfaces for use in a RF product. Proven ability to manage the development and delivery of RF electronic equipment including associated technologies through all stages of the development process Ideally degree qualified Planning and organisation skills with a record of delivering to time and cost Self-starter with drive, energy and enthusiasm and a clear focus on delivery and results

Satellite AIT Electrical Systems Engineer Location: Stevenage Contract: 12 months + Rate: £55 per hour Industry: Space / Aerospace Overview We are seeking a Satellite AIT Electrical Systems Engineer to support spacecraft system testing across functional and environmental test campaigns. You will develop, debug and execute automated test sequences, support anomaly investigations, and contribute to spacecraft verification activities. Key Responsibilities Interpret electrical and functional test requirements Develop, debug and execute automated test sequences Provide first-line support during spacecraft test operations Investigate faults and support anomaly resolution Prepare test procedures and produce test reports Support environmental testing (TVAC, EMC, Magnetic) Contribute to test reviews and non-conformance investigations Ensure compliance with engineering standards and procedures Required Experience Experience writing test sequences/scripts for spacecraft testing Experience using Central Checkout Systems (CCS) Knowledge of spacecraft subsystems such as: Data Handling MIL-STD-1553 / SpaceWire Power and Thermal Systems Attitude & Orbital Control FDIR Experience with spacecraft or complex electronic systems testing Electrical fault investigation and test debugging experience Familiarity with Windows and Linux environments Desirable Skills Elisa or Java experience Linux/Unix Bash scripting Programming knowledge (C, Python, Java or similar) Experience with electrical test equipment (DMM, oscilloscopes, data bus analysers) Environmental or launch test campaign experience Cleanroom working awareness

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. Join our Transparencies team as a Principal Design Engineer and help drive innovative design solutions. We are looking for a Principal Design Engineer to join our Transparencies team to support a portfolio of new and existing programmes including Fast jet canopies, Helicopter Windscreens and Flight Deck Windows. The Principal Design Engineer is a technical authority within the Transparency Systems team, responsible for leading complex product development, driving technical strategy, and ensuring engineering excellence across multiple programmes. It spans the full lifecycle: advanced concept development, requirements definition, geometric design, materials and process selection, supporting tooling design, manufacturing development, qualification, and in service support. The Principal Design Engineer also plays a major role in shaping technology roadmaps, mentoring engineering teams, and representing the business in high-level customer, regulatory, and airworthiness discussions. This role requires flexibility for occasional travel, both within the UK and internationally. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. Job Responsibilities Act as the technical authority for transparency design across multiple programmes, ensuring design integrity, safety, and compliance with customer, regulatory, and airworthiness requirements. Lead the definition of design standards and engineering best practices for transparency systems and approve design solutions, specifications, concessions, rework schemes, and compliance documentation. Provide expert guidance on requirements management, materials selection, structural performance, optical performance, manufacturing processes and qualification methods. Represent Design function in MRBs and serve as the primary escalation point for all MRB-related queries, exercising technical authority to determine and approve the disposition of non conforming parts. Define and validate test methods and/or alternate means of compliance (analysis/similarity) as required to demonstrate design solution complies with requirements. Act as a senior technical interface with customers, suppliers, regulatory bodies, and internal stakeholders. Communicate complex technical information clearly to both technical and non technical audiences. Lead major technical reviews, gate reviews, and customer design reviews, ensuring high quality technical data and presentations. Identify, assess, and manage technical risks across programmes, proposing mitigation strategies and influencing programme direction. Support capability development within the Transparency Systems team including training, knowledge capture, and succession planning. You will contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Degree in Aerospace, Mechanical or similar Experience in Aerospace design / or Aerospace product development. Deep understanding of the full product lifecycle, design practices, manufacturing processes, and airworthiness requirements. Proven ability to lead complex engineering work packages and solve complex technical problems using evidence based, methodical approaches. Familiarity with digital engineering and model based design preferably using CATIA V5. Excellent communication skills, able to create clear, concise, and accurate technical content and present to senior stakeholders. Desirable: Expert user of CATIA V5 for complex modelling and drawing creation Chartered Engineer status (CEng) Experience working with defence customers and regulatory authorities. Experience in transparencies, composites, or specialist structures/ systems. This is a hands on role, and the work will entail a high level of collaboration with Manufacturing Engineering and Operations as part of an integrated programme team to ensure both technical and programme objectives are met. You'll have strong leadership qualities with experience mentoring and developing engineering teams. You should be adaptable in your approach to work, and be willing to understudy other team members in their areas of responsibility to ensure overall department objectives are met. As Principal Design Engineer, you will be naturally detail oriented and appreciate the need for procedural compliance to meet both regulatory requirements and maintain product safety. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal stakeholders. You should seek to increase/deepen own technical knowledge through study, training, collaborative working and continual professional development. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

Electrical Systems Test Engineer - Satellite AIT An opportunity to shape the performance and reliability of next‑generation spacecraft Location: Onsite (UK Eyes Only) Clearance: SC Clearance Required Rate: £55.00 per hour (Umbrella, Inside IR35) Hours: 37 per week Role Overview This role places the Electrical Test Engineer at the centre of satellite Assembly, Integration & Test (AIT). The engineer will design, develop, and execute complex electrical and functional test sequences that ensure spacecraft are fully prepared for the challenges of launch and the space environment. They will work hands‑on with flight hardware, support live test operations, investigate anomalies, and contribute to the technical reviews that determine spacecraft readiness. This position is ideal for someone who thrives on precision, problem‑solving, and the excitement of seeing their work contribute directly to a mission in orbit. Reports to: Satellite AIT Electrical Test Engineering Manager Works with: AIT EGSE engineers, Functional Verification engineers, Quality teams, Design and Operations architects, AIT management, CADM Key Responsibilities Test Development & Execution Interpret electrical and functional test requirements from detailed specifications. Develop, debug, and execute automated test sequences using high‑level languages and bespoke spacecraft checkout systems. Prepare and run complex test procedures on flight spacecraft and test benches. Provide first‑line technical support to operations teams during live spacecraft testing. Technical Investigation & Review Support anomaly investigations and contribute to Non‑Conformance Review Boards (NRBs). Participate in major project reviews including Test Readiness Reviews, Post‑Test Reviews, and Test Review Boards. Produce clear, comprehensive test reports and documentation. Environmental & System Testing Support spacecraft functional and performance testing during environmental campaigns such as TVAC, magnetic, and EMC testing. Assist in spacecraft system investigations and follow‑up actions from review boards. Quality & Standards Work in accordance with company procedures, quality standards, and cleanroom disciplines. Collaborate with multidisciplinary teams to enhance test coverage and reliability. Skills & Knowledge Technical Expertise Experience writing spacecraft test sequences/scripts for Central Checkout Systems (CCS). Knowledge of scripting or programming languages (e.g., Elisa, Java, C, Python, TCL, VBA). Understanding of spacecraft subsystems such as: Data Handling & TMTC 1553 and SpaceWire communications Attitude & Orbit Control Systems Power systems, batteries, solar arrays Thermal control and FDIR Familiarity with Linux/Unix and Windows environments. Competence with electrical test equipment (oscilloscopes, DMMs, current probes, data bus analysers). Awareness of system‑level testing and verification processes. Experience Developing and debugging spacecraft system test sequences, including FDIR. Supporting environmental and launch test campaigns. Investigating electrical/system faults and resolving test anomalies. Preparing test procedures, writing reports, and supporting technical reviews. (Desirable) Electrical integration experience on spacecraft or test benches. Education & Background Degree in Electrical Engineering or a related discipline OR 5+ years of relevant experience in spacecraft, avionics, or complex electronic systems testing Experience within the space or aerospace sector is highly beneficial Security Requirements The successful candidate must be a UK National and able to obtain SC‑level security clearance prior to starting. This vacancy is being advertised by Belcan

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. The Luton team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems and specialist structures for both civil and defence applications. The areas of activity cover but is not limited to: Electro-thermal systems and Electro-mechanical systems, Specialist materials and coating systems, Embedded and structural composites, Aircraft transparencies, Icing modelling and analysis, Sensing and data acquisition, Electrical and software control systems and digital engineering / manufacturing. We are seeking a Research Engineer to develop and mature manufacturing process technology to enable low cost, high rate and high-yield manufacturing of aircraft structures with embedded ice protection capability, with a focus on automation and digitalisation to drive innovation and manufacturing excellence. As this is a research role , we are looking for an innovative thinker, your work should push the boundaries of conventional engineering in terms of the design and integration of state-of-the-art manufacturing processes whilst appreciating aerospace certification requirements. Youll be comfortable travelling within the UK when needed, with occasional opportunities for international travel depending on programme demands. Job Responsibilities Responsible for the technical delivery of allocated project deliverables, or project work packages, ensuring the research objectives have been satisfied. Support or lead any necessary 'hands on' development test work and development trials that are required to meet your Work Package/Work Stream delivery objectives. Support or lead the design of external work packages to be carried out by third parties to meet project research objectives. Responsible for accurately capturing and recording data and results from test work and development trials. Responsible for raising and issuing high quality and detailed technical documentation. Seek to understand the strategic direction of the target products or manufacturing process technologies being developed within your project(s). Contribute to Technology Development Plans and Technology Business Cases within your project(s). Contribute to multi-year planning and internal/external funding proposals as required. Suggest and explore exploitation routes, aligned with the guidance of the Work Stream Lead. You may support project stakeholder management with internal/external customers, and you may lead management of supply chain partners in some cases. Take an active role in creating a personal development plan linked to GKN's TEF and will be responsible for delivering on agreed objectives supported by your line manager. Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team. Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: A relevant professional qualification such as HNC/HND/ Degree in engineering (e.g. Automotive, Mechanical, Electrical, Chemical) Good working knowledge of general industrial manufacturing processes, and an interest in understanding new and emerging techniques. Good working knowledge of AS9145 APQP/PPAP requirements and tools supporting Zero Defect Manufacturing approaches. Good working knowledge of Lean manufacturing philosophies and Six Sigma / Statistical techniques for process control and problem solving. A logical and methodical approach to task planning. Good report writing and presentation skills, able to support and present at internal and external technical and project review meetings. You will be developing your own network and you will have a general awareness of key companies and key individuals who operate in the wider aerospace technology and engineering field. Desirable: A higher degree qualification such as a Masters, PhD or EngD Experience of working with and configuring PLCs (Siemens) Experience of working with and configuring SCADA systems. Proficient in operating and configuring industrial equipment, in particular ABB robotic systems including the use of Robot Studio software. As Research Engineer you should have a broad engineering knowledge and be an innovative thinker, being able to apply and combine engineering concepts from a number of disciplines including Manufacturing process selection, Industrial process control, Robotics, Digital engineering (data capture and analytics) and have an appreciation of Lean Manufacturing principles to be able to deliver cutting edge manufacturing solutions for the next generation of ice protection systems. The ideal candidate will have experience in equipment procurement, including Capex generation, equipment specification, supplier management, commissioning and buy-off. They will also bring working knowledge of AS9145 APQP/PPAPparticularly MSA, PFMEA and SPCalong with a general understanding of aerospace product certification and qualification requirements. As a Research Engineer , you will bring an adaptable approach to your work and be comfortable collaborating with colleagues across different areas of expertise to achieve project objectives. You will be naturally curious, proactively deepening your technical knowledge through study, experimentation, hypothesis testing and cross-functional collaboration.Your proactive mindset will enable you to quickly understand and adapt to new technology areas, while your strong communication skills will allow you to confidently engage with a wide range of internal stakeholders. This position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. TPBN1_UKTJ

Due to increased workload, we are looking for experienced Principal Mechanical Design Engineers to work in all areas of the Product Life Cycles with the drive and enthusiasm to join Europe's leading missile systems provider, developing and designing Test Equipment solutions for the next generation of weapons. Salary: Up to £55,000 depending on Experience Location: Stevenage (We may be able to offer a relocation package for this role) Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: Maximum total (employer and employee) contribution of up to 14% Overtime:Opportunity for paid overtime Flexi Leave:Up to 15 additional days Flexible working:We welcome applicants who are looking for flexible working arrangements Enhanced parental leave:Offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: Due to increased workload, we are looking for experienced Principal Mechanical Design Engineers to work in all areas of the Product Life Cycles with the drive and enthusiasm to join Europe's leading missile systems provider, developing and designing Test Equipment solutions for the next generation of weapons. You will support design, development and proving activities, throughout the product lifecycle, for a wide range of bespoke test system hardware. This opportunity provides fantastic development opportunities for career progression within MBDA. What we're looking for from you: Ideally Degree/HND/HNC qualified plus significant experience in Mechanical Design and Development. A strong understanding and use of GD&T would be advantageous. The ability to lead mechanical design work packages and have experience of working within a multi-disciplinary team with the awareness and understanding of the challenges that this may bring. Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Strong communication skills, both written and verbal with the ability to influence and negotiate with partners across the business. Experience of supplier engagement and development across internal and external multi-disciplinary teams. The awareness and understanding of cultural differences with the ability to adapt accordingly. A willing, helpful attitude, a calm professional manner, and the ability to assess and set priorities and deal with multiple issues on a regular basis. Relevant 3D CAD/CAE experience (training on our preferred CAD tools will be given) An understanding of manufacturing processes, design for EMC, connectors to BS & military specifications, tolerance studies environmental test, thermal management design, material selection would be advantageous.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

An opportunity has arisen in an agile team with varied strengths for an Engineer to work across the entire portfolio of MBDA UK products undertaking sophisticated analysis and supporting both laboratory and field trials! Salary:Up to £55,000 (depending on experience) Location: Stevenage Dynamic (hybrid) working: Typically 4 days per week on-site, due to workload classification. Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime:opportunity for paid overtime Flexi Leave:Up to 15 additional days Flexible working:We welcome applicants who are looking for flexible working arrangements Enhanced parental leave:offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and moreThe Opportunity: The Trials and Analysis team within Environmental Engineering is integral within all land, sea and air based weapons system projects. Environmental provide a key technical focal point for all stages of the product lifecycle, from concept definition and product development, through design aid and formal qualification, and into in-service support. Expertise covers the areas of: requirements specification and management; data analysis; simulation and modelling; and testing in climatic, mechanical (vibration and shock), structural mechanical and fatigue The Role: Apply specialist technical knowledge to complex systems and structural mechanisms providing advice to projects with the responsibility for the delivery of technical aspects of data evaluation activities. Collaborate with customers to perform data evaluation tasks or technical work packages, such as data gathering trials and assessments, platform integration activities, and structural modal assessment. Ensure timely and budget-compliant delivery of high-quality results. Carry out a full range of technical evaluations and investigations, including evaluation of technical options, preparation of reports with suggested recommendations to support the resolution of problems attributed to shock and vibration. Develop test specifications and carry out activities related to vibration, shock and signal evaluation in line with all technical, safety and quality standards. Plan, deliver and monitor assigned work packages, make engineering decisions within own sphere of responsibility and delegated authority to ensure requirements are delivered to plan. Perform engineering capability improvements through methods and process development efforts.What we're looking for from you: A strong technical background in environmental, mechanical or similar field with: Excellent investigative instinct and decision making attributes Excellent interpersonal and influencing skills High motivations and adaptability Experienced in analysing vehicle/missile operations in complex environments Instrumentation and signal processing experience helpful Vibration, shock and thermal analysis experience preferredOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given. MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-CT1

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. As a member of the Manufacturing Engineering Team, the Senior Manufacturing Engineer will initially report to the Manufacturing Engineering Manager, with daily leadership and support provided by the Team Leader. Working across Civil and Defence business lines and based at our Luton site, occasional travel to visit equipment suppliers will be required. The Senior Manufacturing Engineer will work on several value streams within current programmes developing new and existing manufacturing processes whilst supporting the day-to-day operations team at Luton. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. Job Responsibilities Local project technical lead for the implementation of production planning, from original concept through to production. Design high capability manufacturing processes using GKNs Zero Defect Manufacturing (ZDM) tool suite, including the APQP Core Tools. Develop, document and optimise new and existing manufacturing processes such as creation/amendment SOP (Standard Operating Procedure) and Process Specifications Create and update engineering documentation to maintain configuration control and help manage point of introduction activities, first article inspection and customer approval Lead structured improvement activities to reduce process driven scrap and rework Provide MRB (Material Review Board) support to existing programmes to ensure any process deviation or product faults are reviewed and answered Make presentations at senior level internally and externally demonstrating ability to clearly communicate to the audience Identify, anticipate and offer solutions to technical problems Establish & improve production process controls Comply with company Environmental, Health, Safety and Energy procedures. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Minimum HND qualification (or equivalent) in Mechanical, Electrical, Industrial or Manufacturing Engineering/Aerospace Demonstrable Manufacturing Engineering experience gained from ideally the Aerospace, Automotive, Yellow Goods industry 6Sigma Greenbelt qualification Experience in APQP standards including Process Flow Diagram, Process Failure Mode Effect Analysis, Process Control Plans, Measurement System Analysis and Process Capability Experience of root cause analysis using Fishbone (Cause and Effect) Diagrams and 5 Whys (Five Whys) techniques Demonstrable experience of practical problem-solving techniques using A3 or 8D Desirable: Experience Leading Lean Manufacturing including process standardisation kaizen activities such as 5S Experience in lay-up processes for composite materials Specification interpretation experience We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Senior Manufacturing Engineer will have the ability to communicate effectively at all levels within an organisation and be flexible in your approach. The successful person will have a hands-on, creative approach to collaborate with multiple departments to improve manufacturing processes. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

Role: Senior RF Design Engineer Location: Hertfordshire, Hybrid Salary: Up to £65,000 depending on experience + bonus + benefits About the Role Our client is looking for a hands on RF Design Engineer to research, design, and test advanced radio-frequency technology for integration into complex defence systems. You will work on cutting-edge RF circuits, prototypes, and modifications, ensuring designs perform reliably in challenging environments. This role offers a blend of practical laboratory work and technical design, giving you the opportunity to see your designs through from concept to testing. Key Responsibilities Design, prototype, and test RF circuits across a wide frequency range (30 MHz – 30 GHz) Work on components such as LNAs, HPAs, filters, oscillators, synthesizers, and modulators Conduct design proving tests and trials in the laboratory Apply knowledge of EMC, vibration, and thermal considerations for harsh environments Use RF design software (e.g., Microwave Office) for circuit layout and analysis Support design for manufacture and test, liaising with production teams Document and present results, issues, and solutions to internal teams and customers Experience & Skills Required Strong practical RF design experience at the component and circuit level Hands-on lab skills: soldering, fault-finding, use of spectrum analyzers, VNAs, power meters Good knowledge of analogue, digital, and power supply design Experience designing RF for harsh environments Skilled in RF simulation and layout tools (Microwave Office or equivalent) Excellent communication and report-writing skills Team player with initiative and a passion for electronics Benefits Company bonus Pension Flexible working & leave Enhanced parental leave and healthcare benefits Excellent site facilities Security: Candidates must hold British Citizenship due to security vetting requirements

GBR Recruitment Ltd, are working exclusively with a one of the UK’s well established & highly respected flexible packaging machinery businesses, recruiting for an experienced multi-skilled Field Service Engineer with both Mechanical & Electrical (Electrical bias) skills to install, maintain & repair a variety of semi-automatic & automatic equipment, made by leading, high-quality business partnering brands from Europe. Many of the employees have represented this business for a minimum of 20 years, displaying fantastic longevity amongst the current workforce, as this company is people centric & really invests in its people. As the company’s Field Service Engineer, you will work with both SME & Major National clients, working on their Vertical (VFFS) and Horizontal (HFFS) form fill & seal machinery, flow wrapping machinery, semi and automatic banding system machines, automatic bag forming & bag filling machinery, automatic sleeve wrapping and shrink wrapping lines, & other associated machinery, most with PLC controls (Mitsubishi & Siemens PLC’s). You will get to test your engineering skills across an array of differing machinery, from entry level models & mid-range options, through to larger, high-volume, high-speed machinery, giving you variety in your working day. This role is both field based (UK wide) & Workshop based, so flexibility is required. Duties: • Install, service, modify, fault find & repair flexible packaging machinery on UK customers sites or in the head office workshop, • Working with PLC-controlled systems, including diagnostics & modification (hardware, environmental & protective repairs, no programming), • Troubleshooting electrical & mechanical faults, replacing parts & components, • Proactively managing scheduled maintenance of machines, • Liaising with customers on-site to ensure smooth handover & ongoing technical support, • Training customers to use the machinery & to get the optimal usage out of the machines, • Maintaining accurate service records & updating maintenance logs, • Setting up machinery for demonstrations to customers & potential customers Attributes: • A time served multi-skilled Engineer from the packaging / print machinery industry, • Level 3 NVQ in Electrical Engineering or equivalent, • Experienced in working with 3 phase electrical power supplies is imperative, • 18th Edition wiring regulations – must be able to read wiring diagrams, • Strong Mechanical Engineering skills, • Previous experience of working on automated flow wrappers, banders, bag formers, bag fillers, shrink wrapping machinery & similar would be preferable, • PLC knowledge (not a programmer), • Ideally you should have thermal inkjet printers, pneumatics, conveyor & sealing systems experience, • Machine setting & operating skills, • Happy to work field based covering the UK & also in the workshop, • Used to giving technical advice to clients, as well as operator training, • Able to communicate effectively & professionally at all levels, • Occasional overseas travel to Europe for machine training and line approvals, • Driving license required as a company vehicle is given for this role This role would suit someone living in Bedford, Luton, Milton Keynes, Buckingham, Dunstable, Stevenage, St Albans, Aylesbury, Hitchin, Letchworth Garden City, Leighton Buzzard, Watford, Enfield, Biggleswade, St Neots, Welwyn Garden City, Northampton & areas close to these. Interviews to take place immediately, with an ASAP start

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. Based at our Luton Manufacturing site as the Manufacturing Engineering Manager Tooling youll be working across both our Defence and Civil business lines. You will provide and lead a team of Tooling and Cad Engineers in the design, manufacture and maintenance and control of all Site Tools. This will involve the technical capability to create and design tools as solutions to support the manufacturing operations. Youll be accountable for delivering robust, capable manufacturing process technology as it applies to materials, tooling, part fabrication and assembly. The role involves the creation of significant tooling designs from initial concept through to production for the production of aircraft transparencies and Ice Protection Tooling, jigs and fixtures. Among other activities, this will include responsibilities for 4 large CNC machines on site and calibration of current and the development of new or existing tooling. Supporting Manufacturing Engineering teams may also be required. The successful candidate will be experienced in a relevant engineering discipline and have a hands on approach, be able to prioritise jobs, be comfortable liaising with suppliers and other departments. Furthermore responsibilities for Manufacturing Engineering Configuration control, using SAP and more traditional documentation such as Specifications and Routings. The role will also provide leadership, coaching and mentoring to a small team of Tooling Engineers on the Luton site, supporting the Manufacturing Engineering Managers in matters of staff performance and development. The role will also be responsible for the overall load and capacity management of the tooling team members and provide reports and updates on tooling work plans as required by the Manufacturing Engineering Managers and/or Site Head of ME. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. There is the requirement for flexibility for occasional travel in the UK. Job Responsibilities Exemplifying a safety-first mind-set and ensuring compliance with the GKN Aerospace Health, Safety and Environmental policies and standards. Responsible for the development and support with technical solutions to complex problems within GKN Aerospace environment, our customers and suppliers by utilizing root cause analysis, preventative and corrective action to reduce and support to eliminate non-conformances. Maintain positive, team relationships with internal and external customers, as well as co-workers Responsible for tool fabrication quotes, tooling design and input for new product quotes, tooling configuration changes that involve cost estimation and schedule coordination and New Projects Introduction support. Act as key interface between external tooling suppliers and internal customers such as Program Managers and Engineering Managers Manage and maintain Tooling Engineers workload, skill and development, EHS and welfare to ensure tooling work is sufficiently resourced by the business with appropriate metrics and KPIs Leadership of CNC Engineers and technicians to support production processes on large 5 axis CNC machines Configuration control of Manufacturing documentation to support operations, costings, BOMs routings and specifications. Creation, control and maintenance of master tooling registers for both customer and domestically owned tooling suites Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Technical expertise in Tooling solutions (Engineering), with a professional qualification (BEng, BSc, HNC) or strong background in engineering (Aerospace, Mechanical, or Automotive). Working knowledge of design for manufacture principles and tool/component manufacturing methods and able to provide technical input at all levels of work. Ability to create engineering drawings with an understanding of geometric tolerances and datum features. Organised and structured approach to tasks. Experience in tooling for composites and/or transparencies. Experienced in CAD 3D modelling and drafting (Catia V5). Understanding of inspection/calibration methods and interrogation of results. Be compliant with the Companys Environmental, Health & Safety and Energy procedures. Be proficient in English language, both written and spoken. Desirable: Project Management experience. Understanding of export control and compliance and security marking requirements. Working knowledge of quality system models such as ISO9000, AS9100, or D1-9000. Experience of New Product/process Introduction (Industrialisation) & existing production process improvements. We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Manufacturing Engineering Manager Tooling will have the ability to be agile and shift focus on competing priorities. The successful person will be a self-starter, able to manage own workload with excellent communication skills. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

Due to increased workload, the Mechanical Analysis Group is looking for an experienced stress engineers to lead the structural design and development of a next generation complex weapon platform. You will collaborate closely with multi-disciplinary teams across our UK sites to develop an advanced aerospace structural solution. Salary: Circa £58,000 depending on experience Location: Stevenage (We may be able to offer a relocation package for this role) Dynamic (hybrid) working: Minimum 3days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard (BPSS) and Security Clearance (SC) checks, which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Dynamic working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... The opportunity: The Mechanical Analysis Group is responsible for the structural and thermal performance of MBDA's military systems. We deliver structural and thermal analysis expertise across the whole product lifecycle from studies in the early concept stage and detailed development of engineering designs to manufacturing concessions and in-service support. Our breadth of work within the Mechanical Analysis Group can provide opportunities to gain experience across a wide range of structural analysis disciplines, including but not limited to: Classical hand calculations; CAE Modelling (Static, Dynamic, Fatigue, Aeroelastics, Non-Linear, Impact, Kinematic), Qualification & Design Testing, Fault Investigation & Loads Derivation. We operate in a supportive and collaborative environment where people feel valued and are encouraged to achieve their full potential. We encourage knowledge sharing within the team and support opportunities to work on a variety of projects simultaneously. We are a highly motivated group with a strong desire to improve and deliver. Our structural analysis is pivotal in proving the capability of MBDA UK's systems. What we're looking for from you: Ideally degree qualified in a relevant engineering / science discipline or have significant experience in a relevant field (e.g. Mechanical, Aerospace, Structural Analysis etc.). Proven experience in estimating, planning, leading and delivering a variety of structural analysis work packages, using both classical hand calculation methods and CAE tools (Hyperworks desirable). Demonstrated ability in preparing and presenting comprehensive technical reports, conveying complex findings and recommendations to stakeholders, including senior management. Proactive and passionate about developing and improving methods, processes and tools. Able to mentor and support junior engineers providing technical expertise and fostering their professional growth. Self-motivated individuals who are great problem solvers, can take responsibility and work independently as well as a part of multi-disciplinary team. Excellent verbal and written communication skills with the ability to network, influence and manage internal and external stakeholders. Composite stress analysis experience would be an asset. Willingness to obtain and hold DV clearance will be an asset. We promote diversity and growth at MBDA so please apply if you meet a sufficient majority of these competencies. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SF1

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. The Luton Engineering & Technology team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems, transparencies and coatings, and specialist structures for both civil and defence applications. Were looking for a Senior Engineer - Materials & Processes with a strong non-metallic materials engineering background, to join our materials and test team to support the production and development of next generation composite aero structures, ice protection and transparency products. The role will be based in the Materials, Coatings and Test (MCT) team within the wider Engineering and Technology department and report to the Functional Team Leader. The role as a Senior Engineer - Materials & Processes will support the business and engineering team, with non polymer materials science and processing knowledge and guidance. The role will provide a deep understanding of the interactions between processing parameters and material properties of Acrylics, Polycarbonates and adhesives, being able to guide new technology test plans and current production deviations. There will be occasional travel, national and international, required to support customer visits and other GKN sites. You will also support the work of the business to establish safe working practices and necessary level of documentation. You will be involved with projects from the planning / assembly / instrumentation / commissioning phase though to successfully performing and reporting the test. You will also be responsible for providing specialist support to existing programmes within your field of expertise, helping to resolve manufacturing issues and supporting continuous improvement efforts. You will have a proven track record of leading and delivering technical work, with strong communication skills being confident working with a broad range of internal and external stakeholders, including non-technical audiences. Job Responsibilities Development of manufacturing processes in relation to polymer, composite and adhesive materials Qualification of materials and processes to assure they comply with the requirements Assessment of deviations from the specified materials and processes requirements to assure continued airworthiness Support robust, manufacturing process technologies as applied to materials, Collect inputs, related to a task and take it through an identified process to produce an output / deliverable adhering to quality and schedule requirements. Coordination for material obsolescence and REACh activities: identification of arising issues regarding the REACh legislation, providing support and advice locally and to other GKN sites concerning the impact of REACh. Lead small project material obsolescence replacement activities including material investigation, reporting, customer engagement and implementing in to production Preparing and guiding tests/test plans; critical and systematic interpretation and analysis of test data, applying the outcome of tests for substantiation of specification changes. Troubleshooting and production support on Materials Issues (e.g. Composites, polymers, bonding, surface treatments). Contribute to the development of GKN as a 'great place to work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Composite or Polymer Materials Science or Manufacturing Engineering Degree Experience in Polymer and Composite material science and processing Experience within an industrial engineering discipline, preferably within Aerospace/Automotive/Marine/Energy sectors Experience with quality systems, specifications, standards, etc., with the ability to oversee the broader field Good English language, both verbally and in writing, Desirable: Ability to plan work through formal project management processes, including scheduling and budgeting and lead a team to ensure successful delivery of required outcomes. An awareness of aerospace certification requirements. A higher degree qualification such as a Masters, PhD or EngD within aerospace/automotive/marine/energy sectors Familiarity with REACh environmental legislation The successful candidate should have a broad interest in non-metallic material technologies & testing and characterisation techniques. Youll be able to adapt to changing priorities to meet business priorities handling multiple enquires at once. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal and external stakeholders, including operations and other business functions. As Senior Engineer - Materials and Processes , you will be naturally curious and seek to increase/deepen own technical knowledge through study, collaborative working, hypothesis testing and experimentation. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? ? TPBN1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. We're hiring a Quality Assurance Auditor to be based at our Luton manufacturing site. Reporting to the site Quality Manager, join the quality function to audit GKN Aerospace internal and external requirements such as Business/Quality Management Systems (BMS/QMS) & processes, against Regulatory Requirements, Industry Standards and Customer Requirements. Our Luton site operates core hours of 07:3016:30, Monday to Thursday, and 07:3012:30 on Fridays, giving you an early finish to start your weekend. Job Responsibilities Assist the Quality Manager in the delivery of audit activities that support the respective audit plans and schedules. As appropriate, lead in audit engagement planning, scoping, and follow-up activities. When charged with undertaking an audit, delivering the objectives of the audit, ensuring adequate preparation for the conduct of their respective audit criteria. Providing appropriate constructive feedback and recognition for the audit participants and site leadership team. Within their specific audit criteria for gathering audit evidence, recommendations and preparing the audit and distributing the audit report and conducting the audit follow up. Identify and share across the business, best practices and support continuous improvement of the BMS/QMS and its processes.Youll assess audit evidence and non-conformities, highlight improvement opportunities, and share clear recommendations and risk insights with the Quality Manager. Youll also play a key role in supporting root-cause analysis and corrective action activities. Propagate Quality Culture across GKN Aerospace Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Demonstrable experience of working within a regulated industry such as Aerospace or Automotive Possess the necessary personal attributes/behaviours to act in accordance with the principles of auditing. Knowledge in the use of risk based methods and techniques for audit planning and management; Demonstrable experience in Practical Problem Solving (PPS) and Route Cause and Corrective Actions (RCCA) Techniques in order to provide effective audit follow up / closure assessments. An effective communicator with experience in MS applications/tools. Desirable: Certification, or obtained training, as an Internal or External Auditor through a certified Training Partner Experience of aerospace management systems, processes and procedures Demonstrable knowledge of AS9100 / ISO 9001. Knowledge of Aviation Regulations (EASA, CAA etc.) & contracted customer quality requirements. Experience in undertaking Internal Audits, in a regulated industry, against the audit process requirements. We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Quality Assurance Auditor will demonstrate strong communication skills, using active listening, thoughtful inquiry, and clear articulation when engaging with diverse stakeholders. You'll build effective professional relationships across the business, supporting collaboration and shared understanding. With excellent analytical and critical-thinking abilities, you'll apply close attention to detail when working within complex systems, ensuring accuracy in identifying non-conformities and improvement opportunities. Confidently carry out critical evaluations of processes and designs, assessing effectiveness and highlighting areas for enhancement. Strong problem-solving skills and solid subject knowledge of requirements will support sound judgement and practical recommendations. The role requires effective note-taking, ensuring audit evidence and observations are captured accurately and transparently. The Quality Assurance Auditor will act with the highest level of integrity, maintaining impartiality, confidentiality, and professionalism at all times. With a mindset of adaptability and curiosity, remain open to new information, evolving requirements, and continuous improvementboth in own work and across the wider organisation. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? ? TPBN1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. The Luton Engineering & Technology team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems, transparencies and coatings, and specialist structures for both civil and defence applications. Were looking for a Research Specialist - Special Coatings Technology to join our coatings development team based at our Luton Manufacturing facility, to support the development of next generation high performance transparency polymer coatings, icephobic coatings and coating manufacturing processes. As a Research Specialist you will bring your knowledge in polymer coatings development, processing, application and coating testing techniques to deliver high-impact research and development across Technology Readiness Levels (TRL) 17. Youll be responsible for ensuring that all research outputs are technically robust, innovative, and aligned with our broader engineering and sustainability goals. You will also be responsible for providing support to existing programmes within your field of expertise, helping to resolve manufacturing issues and supporting continuous improvement efforts. You will have a track record of delivering high quality technical work, with experience of working within a project environment. You will have good written and oral communication skills, and be confident working with a broad range of internal and external stakeholders, including non-technical colleagues. As this is a research role we are looking for a hands on innovative thinker, your work should push the boundaries of conventional coating technologies, application and evaluation/testing techniques. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. Job Responsibilities Responsible for the technical delivery of allocated project tasks, deliverables, or project work packages, ensuring the research objectives have been satisfied. Support or lead any necessary 'hands on' development test work and development trials that are required to meet project objectives. Contribute to Technology Development Plans, Project definitions and may support creation of Technology Business Cases and external funding proposals as required. Support project stakeholder engagement activities including customer presentations and reviews, and you may lead management of supply chain partners activities in some cases. Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: A relevant, accredited Chemistry / Materials/ Coatings based degree. Knowledge / Experience of coating development, application technology and materials testing. Experience of test/experimental design, and practical execution in laboratory or test facility conditions to defined standards. Logical and methodical approach to task planning. Good report writing and presentation skills. Desirable: A higher degree qualification such as a Masters, PhD or EngD. An awareness of aerospace certification requirements. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The successful candidate should have a broad interest in Aerospace engineering with an understanding of Polymer materials chemistry & processing, ideally from coatings development perspective, and with technical experience of working within a laboratory environment. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal stakeholders. The successful candidate should be adaptable in their approach to work, and be willing to understudy other team members in their areas of expertise to ensure project objectives are met. As a Research Engineer, you will be naturally curious and seek to increase/deepen own technical knowledge through study, collaborative working, hypothesis testing and experimentation. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount 50% off local travel card Free airport Dart Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

This is a unique opportunity for an experienced Electronic Architect to join MBDA and contribute to the development of our world-class, precision product range. As part of the Electronic Engineering function, you will have the chance to actively participate in research and development activities, shaping future strategies and roadmaps for our Electronic Products and solutions! Job Title: Electronic Architect Salary: Circa £70,000 depending on experience Location: Stevenage (we may be able to offer a relocation package for this role) Dynamic (hybrid) working: We trust our people to agree, within their teams, where and when they can be most effective. Our Dynamic Working policy allows individuals flexibility around the hours they work and where they work. This role could be full time or part time in order to meet your needs. We are flexible and accommodating. Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... The opportunity: Your role will involve defining the electronic and electrical architecture of the equipment, conducting analysis and decomposition to lower-level requirements for sub-elements, and ensuring that challenging customer requirements are met within the constraints of limited physical space and harsh operating environments. Working closely with the Engineering Project Manager, you will be responsible for managing all technical elements of Electronic Equipment's to ensure impeccable 'On Time, On Cost, On Quality' delivery of the technical solution. Effective communication skills are vital as you will frequently engage with both stakeholders and customers. It is also important to possess strong influencing skills, leadership qualities, and a comprehensive understanding of customers' requirements. Having drive, proactivity, and the ability to make decisions and adjust in a constantly evolving and ambitious setting are essential for excelling in this position. What we're looking for from you: Ideally educated to degree level (or equivalent) with an Electronics bias and significant experience in the following areas: Digital electronics and microprocessor systems Power electronics for distributed power networks Design of equipment for safety critical environments Design of equipment for handling sensitive customer data Understanding of software and firmware development techniques Compact packaging and thermal management techniques for complex high-performance electronic equipment Knowledge of internal computing design covering System on Chip technologies, RF, Signal Processing, and Software Defined Radio would be beneficial. As would, experience in EMC and Environmental design. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. The Luton Engineering & Technology team is focused on developing product and manufacturing process technology related to aircraft ice protection systems, transparencies and coatings, and specialist structures for both civil and defence applications. We are looking for an Industrialisation Engineer to join our Industrialisation team to support Capex / sustainability / NPI projects from cradle to grave across our existing and future programs. Working with Key stakeholders across the site, the post holder key objectives are to support and deliver manufacturing systems in compliance with identified requirements including Producibility, Productivity, Manufacturing cost, Regulatory/Customer/EHS requirements and adherence to Zero Defect Manufacturing (ZDM) standards, whilst delivering these projects to the agreed Budget and Schedule following recognised project management methodologies. The Industrialisation Engineer will support and deliver projects including the Planning, Development, Commissioning and Industrialisation of Manufacturing Systems & Processes for the Luton manufacturing site. The engineers development will include internal and external training as required. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday, there is flexibility with working hours as arranged with the manager. There is the requirement to undertake occasional travel when required nationally and internationally, to meet suppliers. Job Responsibilities NPI • the industrialisation Engineer is responsible for the supporting and leading of designated projects including bid development, planning, delivery, and commissioning of Manufacturing Systems and Processes for New Product Introduction programmes [LG3->LG7]. Working with Design Engineering and Programme management, they are responsible for delivering a manufacturing system that fulfils all stakeholder requirements (Safety, Logistics, Quality, Producibility & Business case metrics), including development and maturity of Manufacturing processes and documentation. Capex, • the industrialisation Engineer is responsible for the delivery of CAPEX projects, from supporting the business case development through equipment specification, procurement, commissioning and implementation to ensure productivity & quality targets are met. This includes Identification of new technologies and their development & exploitation, and benchmarking of processes across the GKN portfolio of products. Sustainability, • the Industrialisation Engineer will lead/support continuous Improvement and obsolescence projects throughout the site as identified by the business. Leadership of Projects, • the industrialisation Engineer is responsible for technical leadership of designated industrialisation projects including manufacturing system design, equipment identification and specification, implementation and deliver of APQP activities to ensure robust process capability and ongoing performance. This includes Project Management, Planning, Resource identification, budgeting, & Project reporting within functional and Enterprise standards. Quality Responsible for ensuring implemented solutions deliver the required quality against specification requirements and further deliver sustained manufactured Product quality and drive a quality mind-set within the engineering team and ensure compliance to agreed Customer, Regulatory, Business and functional standards including AS9145 (ZDM). Relationships • Maintain positive, team relationships with internal and external customers, key stakeholders within the business. Foster and champion 5 principles within sphere of influence. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: A relevant professional qualification such as HNC/HND/ Degree in engineering (e.g. Automotive, Mechanical, Electrical, Chemical) Technical expertise in Manufacturing Engineering Ability to influence people, build trust and establish effective working relationships within a global organisation Working knowledge of LEAN processes and practices Working knowledge of quality system models such as ISO9001 or AS9100 Experience of collaborating with Procurement, Finance, Works Engineering, Manufacturing Engineering and Operations. Desirable: Project / Program Management Professional Qualification Familiarity with AS9145 APQP process or equivalent Demonstrable experience in Industrial Engineering and demonstrated ability to deliver work in a structured project environment, with evidence of delivering significant improvements in terms of cost/quality of a manufacturing system Familiarity with appropriate digital opportunities for manufacturing systems Familiarity with managing CAPEX / equipment projects through to production implementation. Experience of managing New Product / Process introduction (industrialisation) & existing production process improvements Were seeking people who want to make a difference individuals with the talent, drive and passion to shape the future of what they do. As Industrialisation Engineer youll thrive in a collaborative, cross-functional environment, with exceptional organisational and time-management abilities. Youll confidently support multiple projects at once, demonstrating initiative and clear communication across all levels of the business. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

We are recruiting for a RF Designer on contract for our client who is in the Defence industry. The role is based in their Stevenage office. The successful candidate will be the designer for specific RF electronics designs. Interfaces to various stakeholders, such as the Datalink Design Authority and other functional entities will need to be managed effectively to ensure the designs are delivered in a timely manner and will integrate to the other parts of the system Responsibilities: The role is substantially technical and hand on testing and proving is essential. Collaborative working with other functions of the business, in particular Software & Firmware Engineering, Mechanical Engineering, Production and Future Systems. Skillset/experience required: Individuals will be able to demonstrate a significant number of the following attributes: Proven relevant RF electronics design experience (likely to be the design of 3 or 4 complex RF electronic items using the latest technologies), preferably for harsh environments (EMC, Vibration, thermal). Can guide the design implementation of RF Electronics Receiver/Transmit amplifier chains, filters and frequency synthesisers over the 30Mhz to 30GHz range. Software Defined Radios of good advantage. Knowledge and proven best practice design of power supplies and digital interfaces for use in a RF product. Proven ability to manage the development and delivery of RF electronic equipment including associated technologies through all stages of the development process Ideally degree qualified Planning and organisation skills with a record of delivering to time and cost This is an umbrella contract, the role is Inside IR35

Mechanical Engineering is excited to offer multiple opportunities for experienced Principal Mechanical Design Engineers, with roles available across all areas of the Product Life Cycle, from mechanical future concepts and detailed design through qualification, production, and in-service support. In these roles of responsibility, you will lead the development of mechanical solutions for a wide variety of complex weapons and weapon systems, working closely with multi-disciplinary teams across engineering, manufacturing, quality, and supply chain. You will be expected to provide technical leadership, drive design maturity, and act as a key interface with internal and external stakeholders. Salary: Circa £50,000+ depending on experience Location: Stevenage (relocation package may be available) Dynamic (Hybrid) Working: An average of 2-3 days per week on-site dependent on work classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The Opportunity: The roles offer the chance to lead complex mechanical design work packages on critical defence products and influence design decisions across the full life cycle. You will play a key role in ensuring designs meet performance, safety, cost, and schedule requirements. The roles provide excellent long-term career progression opportunities within MBDA, including further technical leadership or engineering management pathways. Appointments will be made at an appropriate level based on skills and experience. What we're looking for from you: Ideally Degree, HND, or HNC in Mechanical Engineering (or equivalent) with significant industry experience Proven ability to lead mechanical design work packages within multi-disciplinary teams Strong experience across full product life cycles, from concept to in-service support In-depth knowledge of design proving and qualification activities Robust hands-on experience with design methodologies such as DFMEA, DFA, and DFM Strong communication skills with the ability to influence, negotiate, and make technical decisions Experience engaging with and developing suppliers and external partners Ability to manage priorities, assess risk, and mentor less experienced engineers Understanding of structural, thermal, and/or dynamic analysis (advantageous) Relevant 3D CAD/CAE experience (training provided on company tools) Note: This role may involve UK travel and occasional European travel. Interested? Click Apply Now! Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SF1

World Class Defence Organisation based in Stevenage is currently looking to recruit 3x Mechanical Systems Engineers / Architects on an initial 12 month contract. The role will be hybrid of being split between working from home and onsite. This role would suit a candidate who comes from a strong background of working as a Mechanical Design Engineer, Mechanical Systems Engineer, Mechanical Architect or has experience of Mechanical Systems Architecture. A defence / aerospace background is ideal but not essential. DOORS experience would be great. A background or knowledge of Systems Engineering and Supplier Management would be beneficial. Contract Duration: 12 Months initially and then ongoing and long-term thereafter. Hourly Rate: £65.00ph Mechanical Systems Engineer / Architect Job Description: We have an opportunity for an experienced Mechanical Architect to join the team. This exciting role is to gather and manage the missile mechanical architecture requirements to achieve missile performance, on time and on cost and overall layout vs compliance. This involves providing justification of the design and co-ordinate the verification evidence of missile performance to support certification. The role is responsible for the delivery of the missile mechanical architecture requirements and typical responsibilities include: Establishing the Missile Airframe Task Requirements Specification (TRS) to ensure a structured & coherent mechanical response to the overall Missile TRS Management of the mechanical interface with the launcher Management of Mechanical & Thermal Interfaces across the Missile Defining the optimum mechanical architecture for all variants of the missile, ensuring the mechanical architecture and interfaces meet requirements Implementation of GMA Policies to ensure Modularity & Reuse objectives are achieved Development of the overall proving logic for the validation of the Airframe Ensuring mechanical compliance to the Airframe TRS for missile certificate of design Interface with and manage customer expectations throughout the development process Producing Statements of Work and plans for activities within their sphere of responsibility Direct technical supervision of engineers within their team and indirect management of engineers in the extended project team Controlling assigned budgets, managing personal workload and identifying any further resource needs Skillset/experience required: Educated to degree level with 10 years’ experience or an equivalent qualification having obtained significant experience of mechanical engineering Ability to technically manage internal & sub-contract activities Strong leadership skills, able to establish a clear engineering vision Good knowledge & experience of mechanical design, including: Static & Dynamic Analysis, Design for Environment Thermal Management Good understanding of broader engineering disciplines, including: Aerodynamics Testability Production Experience developing proving logic and managing the generation of compliance evidence towards Certificates of Design Experience across the full Product Life Cycle Ability to influence senior managers and other stakeholders Strong interpersonal and well developed communication skills (written & verbal) Willingness to travel within UK and Europe DOORS experience would be great

Job Title: Principal Thermal Mechanical Engineer Location: Cowes, Portsmouth Broad Oak, Great Baddow, 3 days a week onsite We offer a range of flexible working arrangements please speak to your recruiter about the options for this particular role Salary: Up to £77,100 (dependent on skills and expe

Proactive Personnel are currently recruiting for a Thermal Manufacturing Engineer for a international manufacturing company at their site based in Telford.

Title: Experienced Thermal Insulation EngineerLocation: HullHours: 38 Hrs p/w - Mon-Fri - 0800-1630 + over time (optional)Salary: £15-£19ph - Negotiable based on experience. We are seeking a highly competent and experienced Thermal Insulation Engineer to deliver high-quality insulation and claddin