Boeing jobs in Tacoma, WashingtonCreate job alerts

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Numerical Control Multiple Tool - Milling Machine Operator to join our Fabrication team in Auburn, Puyallup, and Algona Washington. As a Numerical Control Multiple Tool-Milling Machine Operator, your role will involve operating advanced milling machines with precision, ensuring that all components are produced to the highest standards. You will be responsible for maintaining a safe working environment by adhering to established safety protocols and best practices while preparing and adjusting machinery for optimal performance. Your attention to detail and ability to interpret technical documents will be essential in ensuring that every part meets stringent specifications. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: * Set up, operate, and adjust numerically controlled milling machines, utilizing various control media, program documents, holding fixtures, and cutting tools, or manually entering required data to meet quality requirements * Obtain information from drawings, documents, sketches, and verbal instructions to prepare for machining operations * Make necessary preparations and adjustments to ready the machine for operation, including installing various cutting tools during machining cycles as authorized * Use measuring instruments and gauges to check cutting tools and parts for conformance to specifications and prints * Assist planners or programmers in determining the final numerical control program as authorized * Mount and check cutting tools in holders, ensuring proper loading in machine magazines or spindles * Initiate requests for corrective action in the event of machine malfunctions and detect faulty tools, taking corrective action in accordance with shop practices * Load, preload, and manually position fixtures at designated program stops Physical Demands and Potential Hazards: * Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs * Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting * Work in environments that may involve contact with metals, solvents, and coolants * Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards * Adapt to varying noise levels and atmospheric conditions. * Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications * 1+ Years of experience using precision measuring tools * 1+ Years of experience as a machine operator, writing and editing CNC programs * 1+ Years of experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications * 1+ Years of experience reading and interpreting blueprint and assembly instructions or drawings * 1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools * Ability to lift, push, and pull up to 35 pounds Preferred Qualifications: * Experience working with and around hazardous materials (while using the proper protective equipment) Typical Education & Experience: * High school graduate or GED preferred. Relocation: * Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: * This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $31.32/hour, with the potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Apr. 18, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington. As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: * Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks. * Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells. * Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required. * Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives. * Initiate and document any nonconforming materials or assemblies according to specifications and procedures. * Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance. * Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements. * Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies. * Inspect mockups of engineering design changes to ensure adherence to specifications. * Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes. * Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records. * Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required. * Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts. * Document discrepancies and report them to the appropriate personnel for resolution. * Assist in the training and instruction of lower-grade inspectors, providing guidance as needed. Physical Demands and Potential Hazards: * Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs. * Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. * Work in environments that may involve contact with metals, solvents, and coolants. * Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. * Adapt to varying noise levels and atmospheric conditions. * Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications: * 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design). * 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators. * 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices. * Experience as a Quality Inspector. * Experience working with Microsoft Office (Excel, Word, PowerPoint). * Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. * Ability to complete Fall Protection Training. Preferred Qualifications: * Experience inspecting welds / welds certification * Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.) Typical Education & Experience: High school graduate or GED preferred. Relocation: * Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: * This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Mar. 27, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is looking for a Senior Manufacturing Manager (Level L) to support the Skin & Spar Manufacturing Business Unit (MBU) team onsite in Puyallup, Washington. This role will primarily be based out of Puyallup, Washington and require frequent travel to Auburn, Washington. This position is 2nd shift. This Senior Manufacturing Manager will lead team members and will be responsible for the People, Safety, Quality, Delivery, Cost & Innovation performance while delivering product to our internal Boeing Programs. In this role, there will be regular interaction with the cross-functional production support team, operations, executive leadership, and regulatory agencies. This position requires strong leadership and people skills, the ability to problem solve, proactively identify issues, and develop and communicate action plans. Position Responsibilities: * Manages employees and first-level managers performing activities within multiple manufacturing disciplines * Develops and executes integrated departmental plans, policies and procedures and provides input on departmental business and technical strategies, goals and objectives * Acquires resources for department activities, provides technical management of suppliers and leads process improvements * Develops and maintains relationships and partnerships with customers, stakeholders, peers, partners and direct reports * Provides oversight and approval of technical approaches, products and processes * Manages, develops and motivates employees and first-level managers Basic Qualifications (Required Skills/Experience): * 5+ years of experience working in an aerospace, fabrication, or manufacturing environment * 5+ years of experience leading teams and direct reports * 5+ years advising and influencing managers or non-managers to meet schedules or resolve technical or operational problems * 5+ years of experience using lean manufacturing and/or continuous improvement practices and tools in the workplace Preferred Qualifications (Desired Skills/Experience): * Bachelor's degree or higher * 3+ years of experience mentoring, coaching, guiding and leading teams * 3+ years of experience leading and influencing cross-functional teams * 3+ years of experience leading, managing, or implementing Lean initiatives * 3+ years of experience leading or managing Corrective Actions or Root Cause Analysis * 3+ years of experience effectively communicating with employees, peers and senior leadership * Experience in building a culture of safety and quality Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This role is primarily second shift; however, there may be additional shift requirements to support program objectives. Supporting weekends and overtime according to business needs will be required. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $141,300 - $181,000 Applications for this position will be accepted until Mar. 26, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 2nd shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing's Global Real Estate and Facilities (GREF) organization is seeking a Maintenance Plumber to join our team in Seattle, Auburn, Kent, Puyallup, Renton and Tukwila, Washington. You will be supporting building & ground maintenance and initial installations. Our team supports a 24/7 operation, based on business needs. This role allows you to obtain a variety of skillsets, the opportunity to learn from knowledgeable colleagues, and to work on critical maintenance plumbing solutions for major Boeing sites. You will receive both on-the-job & formal training to enhance your technical skills, and backflow licensing is provided by the company. Incentives include additional pay for obtaining trade licenses paid by the company as well as receiving shift differential pay for second and third shift. This position is also eligible for overtime hours and pay. Position Responsibilities: * Perform routine diagnosing, testing, and repairing of all types of plumbing lines and fixtures * Repair, construct, install, rebuild, adjust, and modify plumbing lines and fixtures * Layout, construct, maintain, diagnose, repair, adjust, modify, rebuild and test plant facilities plumbing, such as air, gas, and water, and drain line, sprinkler systems; gasoline pumps and related systems; high and low pressure steam equipment; liquid, air and vacuum pumps and accessories; pneumatic controls; various regulating and other valves; oxygen, hydrogen and hydraulic systems; boiler and furnace burners, baffles, pilot lights, governors, floats, strainers and oil pumps * Perform work described in other maintenance classifications when incidental but necessary to the accomplishment of the assignment This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications * 1+ years of experience in the plumbing or pipefitting trade * Ability to perform work at heights up to 125 feet about ground level with appropriate safety gear and pass fall protection training * Willingness to work any shift as required Preferred Qualifications: * 1+ years of experience working with any of the following: backflow prevention, chemical process tank lines, or high-pressure steam systems * 1+ years of experience working in an industrial/manufacturing environment * Possess related plumbing certification (e.g., backflow, fitter) Typical Education & Experience: High school graduate or GED preferred. Relocation: * Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: * This position is for all shifts Total Rewards & Pay Transparency At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $33.32 per hour – $61.01 per hour Applications for this position will be accepted until Mar. 27, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician - Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State. As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount. You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications. Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: • Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications., • Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems., • Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions., • Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages., • Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy., • Comply with all Federal, State, and Company regulations while performing duties., • Collaborate with other crafts to assist in troubleshooting outside the central control system as needed., • Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency., • Communicate relevant information to succeeding shifts using management-approved methods., • Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems., • Maintain equipment records, logs, and updates, preparing reports and schedules as required., • Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion., • Ensure system configurations comply with FAA and accreditation requirements., • Possess working knowledge of software programming languages (e.g., Boolean, ladder, C+, C++) and numbering systems (binary, octal, hexadecimal)., • Understand electronic theory, computer and networking architecture, microprocessors, and discrete components., • Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems., • Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design., • Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes., • Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required., • Perform tasks associated with other job classifications when necessary to complete assignments., • Obtain and maintain applicable licenses, certificates, and certifications., • Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems., • Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards. Physical Demands and Potential Hazards: • Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs., • Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting., • Work in environments that may involve contact with metals, solvents, and coolants., • Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards., • Adapt to varying noise levels and atmospheric conditions., • Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: • 3+ years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance., • 1+ years' experience troubleshooting programmable logic controllers (PLC) OR Functionally Equivalent Control Systems, such as related fields including military, shipboard, aircraft support, weapons systems, or industrial automation platforms., • Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training. Preferred Qualifications: • Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment., • Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams., • Experience working around 3 phase, industrial voltages 480v, 277v, 208v., • Ability to work around electromagnetic fields as a result of various types of production equipment. Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process. Typical Education & Experience: High school graduate or GED preferred. Relocation: • This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: • This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $47.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Mar. 30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Metal Surface Processor to join our Fabrication team in Auburn, Algona and Puyallup, Washington. As a Metal Surface Processor, you’ll be part of a skilled team responsible for preparing metal components for aerospace applications through specialized surface treatment processes. From cleaning and masking to anodizing and coating, your work will directly support the quality and performance of parts built for flight. This role requires precision, technical ability, and a strong commitment to safety as you work with complex equipment and follow detailed procedures to ensure each component meets exact specifications. You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation. Position Responsibilities: * Review the tie-in book or standard operating procedures to understand daily work assignments. Provide comprehensive oral or written shift handoffs to ensure seamless workflow continuity. * Monitor the workload in the area and coordinate task flow to optimize shop utilization. Proactively report issues or request additional support as necessary. * Identify, separate, and prepare parts according to work orders and chemical recipes (e.g., alkaline, emulsion, paint strip, sandblast, passivate) prior to racking. * Conduct thorough inspections of materials to verify proper cleaning, etching, rinsing, and other processes to ensure optimal adhesion and coating quality. Perform visual checks post-process to confirm uniform coverage. * Apply approved masking materials and coatings based on technical drawings or tooling specifications in preparation for plating or painting operations. * Determine appropriate racking methods for complex part geometries, ensuring proper contact to prevent burning. Inspect, remove, and report any damaged racks or clips. * Rack and unrack parts while verifying correct part numbers and chemical processes as per work orders. Ensure no overloading or air pocket formation occurs during handling. * Operate material handling systems, including cranes, hoists, and carts, safely to transport parts and materials through processing areas. * Operate and monitor cleaning, Dow Coating, anodizing, dyeing, alodine, and rinsing tanks. Determine correct dip times and maintain appropriate temperatures and solution levels. * Perform specific treatments such as sulfuric/chromic acid dips on 75 ST parts formed on Cerro Bend. Apply alodine touch-ups or chromadize as required. * Assist in maintaining chemical strength by accurately measuring and adding solutions. Estimate material surface area to prevent generator overloads. * Start generators, operate control panels, and utilize overhead cranes to load/unload tanks and transfer processed items between stations. * Strip anodizing from racks using caustic soda and nitric acid. Clean tanks, crocks, and equipment to ensure safe and efficient operations. * Mark, oil, wrap, and route completed parts according to drawings or work orders. Ensure correct parts are matched to work orders and transferred to Quality Assurance (QA) for inspection. * Handle and dispose of hazardous materials (e.g., alodine, acids, solvents) in accordance with safety procedures. Complete all required on-the-job training and maintain necessary certifications. Physical Demands and Potential Hazards: * Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. * Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. * Work in environments that may involve contact with metals, solvents, and coolants. * Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. * Adapt to varying noise levels and atmospheric conditions. * Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications: * 1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division). * 1+ years of experience or training reading and interpreting drawings or blueprints. * 1+ years of experience working with hazardous materials. * Must be able to lift, push and pull up to 35 pounds Preferred Qualifications: * Experience operating cranes. Typical Education & Experience: * High school graduate or GED preferred. Relocation: * Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: * This position is for a variety of shifts. Total Rewards & Pay Transparency At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Apr. 11, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician to join our Electronics team in Auburn & Puyallup, Washington. In this role, you will be empowered to apply your technical expertise and creativity to solve complex challenges in cutting-edge aerospace technology. You’ll work with a diverse team to develop, test, and maintain advanced electronic systems that are critical to the success of our aircraft. This position offers a dynamic environment where innovation, precision, and continuous learning are valued, giving you the chance to grow your skills while making a tangible impact on aviation excellence. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: * Perform electronic and software testing, diagnosis, troubleshooting, adjustment, repair, calibration, checkout, and maintenance of electronic systems and associated equipment, often developing and improvising service procedures as needed. * Fabricate, assemble, and test developmental and prototype mechanical, electrical, electromechanical, and electronic assemblies, including those utilizing software/firmware applications. * Lead, instruct, and review the work of employees in lower classifications assigned to fabricate, assemble, test, calibrate, repair, modify, maintain, and service electronic equipment and systems. * Operate and utilize test equipment, instruments, tools, and machines required to complete work assignments. * Interpret and work from block diagrams, schematic diagrams, prints, specifications, technical information, manufacturing records, sketches, and verbal instructions. * Perform design and fabrication work related to packaging developmental assemblies, including mechanical and assembly fabrication, with engineering assistance. * Maintain certifications, licenses, and permits necessary for work assignments. * Prepare reports, maintain records, and ensure accountability of contract tools and test equipment. * Devise and build temporary tools and work-around methods to facilitate troubleshooting and repair. * Handle and protect components and assemblies in accordance with shop practices, procedures, and drawing requirements. * Prioritize work assignments as directed by leads or supervisors and obtain necessary engineering drawings and test documents when not provided. * Set up and perform bench or automatic tests per work orders, test documents, equipment manuals, and engineering instructions. * Troubleshoot faults in electronic circuits and hardware, adjusting, repairing, or replacing components as required. * Select and use appropriate hand, power, and bench tools to perform required operations. * Maintain test equipment through periodic maintenance and monitor certification dates. * Troubleshoot and repair computerized test systems. * Handle and dispose of hazardous materials safely, following Safety Data Sheets (SDS) and using personal protective equipment. * Pack electronic equipment for travel according to drawings and Boeing specifications. * Verify work quality after each operation to ensure compliance with drawings and standards. * Prepare completed or reworked jobs for inspection. * Communicate with leads, supervisors, engineers, or planners when assistance or clarification is needed, especially regarding drawings, paperwork, or discrepancies. Physical Demands and Potential Hazards: * Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs. * Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. * Work in environments that may involve contact with metals, solvents, and coolants. * Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. * Adapt to varying noise levels and atmospheric conditions. * Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 120.62 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee. Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: * Ability to lift, push, and pull up to 35 pounds. * 3+ years of experience using electronic test equipment. * 3+ years of hands-on experience with power and control electronics circuit design, product design and manufacturing. * 3+ years of experience testing and troubleshooting electronics and electrical systems. Preferred Qualifications: * UL Certified Electrician. Conflict of Interest: Successful candidates for this job must successfully satisfy the Company’s Conflict of Interest (COI) assessment process. Typical Education & Experience: * High school graduate or GED preferred. Relocation: * Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: * This position is for a variety of shifts. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $33.32/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Mar. 27, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Aircraft Structures Mechanic to join our Fabrication team in Puyallup, Washington. As an Aircraft Structures Mechanic, you will utilize your manufacturing knowledge to set up tools and equipment for drilling and fastening complex structures, including composite materials. You will operate various hand and machine tools, including automated equipment, to perform tasks according to specifications while ensuring safety and quality standards. Your responsibilities will include recognizing and reporting any equipment malfunctions, performing maintenance, and coordinating the movement of materials and tools. You will also cut, assemble, and install components, verify your work against specifications, and handle hazardous materials safely. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: * Review daily reports and consult with team leaders to determine job assignments and obtain necessary documentation. * Locate work areas using specified drawings and paperwork. * Verify kitted parts against installation plans and bill of materials, ensuring they are suitable and defect-free. * Retrieve non-kitted parts from designated areas, ensuring compliance with specifications. * Use electronic devices to access work instructions and engineering data (personal cell phones not permitted). * Select and utilize appropriate hand and power tools for assembly tasks, including precision alignment equipment. * Move kits, carts, and equipment within the work cell as needed. * Load/unload jigs and operate mechanical lifts for assembly work. * Locate tools and parts on aircraft using specified methods and set up assembly tools per instructions. * Handle hazardous materials safely and dispose of them properly. * Inspect completed work for defects and cleanliness before submission for inspection. * Perform minor rework and maintain tool control in accordance with procedures. * Maintain personal and tool certifications and seek assistance from supervisors when necessary. * Set up tools and equipment for drilling and fastener installation in complex structures. * Operate various hand and machine tools, monitoring equipment functionality and performing routine maintenance. * Coordinate the movement and preparation of materials and tools for tasks. * Cut, file, drill, and assemble parts, ensuring proper fitting and quality standards. * Conduct reaming, riveting, and sealing operations, applying corrosion inhibitors as needed. * Utilize calibrated tools to verify work against specifications and ensure quality. * Manage equipment and materials within the work cell to ensure efficient workflow. Physical Demands and Potential Hazards: * Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. * Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. * Work in environments that may involve contact with metals, solvents, and coolants. * Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. * Adapt to varying noise levels and atmospheric conditions. * Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. * Ability to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications: * 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, shipbuilding or similar industry. This can include education and military experience. * 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications. This can include education and military experience. * Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. * Ability to lift up to 35 pounds. * Proficiency in reading, writing, and speaking English. Typical Education & Experience: High school graduate or GED preferred. Relocation: * This position offers relocation based on candidate eligibility. Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: * This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Aug. 09, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Crane Maintenance Mechanic, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington. As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes. You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation. Position Responsibilities * Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes * Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities. * Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances. * Determine and/or develop methods where procedures may not be available. * Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes. * Operate, use and maintain overhead maintenance work platforms * Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires. * Inspect and maintain building runway rails and expansion joints. * Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks. * Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations. * Maintain logs, charts, and perform written and verbal tie-in records. * Prepare reports and schedules as required. * Work with and assist employees of other classifications as required. * Perform work in other classifications when incidental but necessary to the accomplishment of the assignment. Physical Demands and Potential Hazards: * Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. * Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. * Work in environments that may involve contact with metals, solvents, and coolants. * Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. * Adapt to varying noise levels and atmospheric conditions. * Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications * 2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances * 2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks. * This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations. * Able to lift up to 35 pounds. Preferred Qualifications: * Experience inspecting and maintaining building runway rails and expansion joints. * Preference given to those with 2 years overhead crane experience. Typical Education & Experience: High school graduate or GED preferred. Relocation: * Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: * This position is for all shifts Total Rewards & Pay Transparency At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: 33.32 – 61.01 Applications for this position will be accepted until May. 29, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to provide students and recent graduates of certified Boeing Pre-Employment Training (BPET) programs with the opportunity to join our Fabrication team as Aircraft Structures Mechanics in Puyallup, Washington. Your BPET Endorsement Form will list the specific job codes for which your course qualifies you for a direct offer of employment. Following your application, a Boeing recruiter will reach out to discuss these job codes and potential locations, ensuring a smooth transition into your new role. As an Aircraft Structures Mechanic, you will utilize your manufacturing knowledge to set up tools and equipment for drilling and fastening complex structures, including composite materials. You will operate various hand and machine tools, including automated equipment, to perform tasks according to specifications while ensuring safety and quality standards. Your responsibilities will include recognizing and reporting any equipment malfunctions, performing maintenance, and coordinating the movement of materials and tools. You will also cut, assemble, and install components, verify your work against specifications, and handle hazardous materials safely. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Eligibility: This position is exclusively open to students who have completed Boeing Pre-Employment Training (BPET) certified courses. Application Instructions: To apply, please ensure you include BOTH of the following documents in the “Resume / CV” field. You may upload multiple documents in this section: * BPET Endorsement Form: For students from BPET-certified academic courses, this form is issued by Boeing, following confirmation by your instructor. For military servicemembers or veterans, this form is issued by Boeing following review of your Military Occupation Code. * Updated Resume: Your resume should provide a comprehensive overview of your hands-on tool experience and/or manufacturing skill sets. Position Responsibilities: * Review daily reports and consult with team leaders to determine job assignments and obtain necessary documentation. * Locate work areas using specified drawings and paperwork. * Verify kitted parts against installation plans and bill of materials, ensuring they are suitable and defect-free. * Retrieve non-kitted parts from designated areas, ensuring compliance with specifications. * Use electronic devices to access work instructions and engineering data (personal cell phones not permitted). * Select and utilize appropriate hand and power tools for assembly tasks, including precision alignment equipment. * Move kits, carts, and equipment within the work cell as needed. * Load/unload jigs and operate mechanical lifts for assembly work. * Locate tools and parts on aircraft using specified methods and set up assembly tools per instructions. * Handle hazardous materials safely and dispose of them properly. * Inspect completed work for defects and cleanliness before submission for inspection. * Perform minor rework and maintain tool control in accordance with procedures. * Maintain personal and tool certifications and seek assistance from supervisors when necessary. * Set up tools and equipment for drilling and fastener installation in complex structures. * Operate various hand and machine tools, monitoring equipment functionality and performing routine maintenance. * Coordinate the movement and preparation of materials and tools for tasks. * Cut, file, drill, and assemble parts, ensuring proper fitting and quality standards. * Conduct reaming, riveting, and sealing operations, applying corrosion inhibitors as needed. * Utilize calibrated tools to verify work against specifications and ensure quality. * Manage equipment and materials within the work cell to ensure efficient workflow. Physical Demands and Potential Hazards: * Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. * Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. * Work in environments that may involve contact with metals, solvents, and coolants. * Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. * Adapt to varying noise levels and atmospheric conditions. * Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee. Basic Qualifications: * Be a student or recent graduate of a certified Boeing Pre-Employment Training course or Military Occupation Code that is certified for the 30005 Aircraft Structures Mechanic role. Applicants must have a valid BPET Endorsement Form. * Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. * Ability to lift up to 35 pounds. * Proficiency in reading, writing, and speaking English. Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Typical Education & Experience: High school graduate or GED preferred. Relocation: * This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: * This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Sept. 17, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Industrial Maintenance Electricians, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington. As a Industrial Maintenance Electrician you will be a vital part of our manufacturing team installing, maintaining electrical equipment. Operate, install electrical systems and preform functional of building and plant equipment. You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation. Position Responsibilities: * Operate, install electrical systems and perform functional testing of building and plant equipment (e.g., machines, motor controls, room re-models) * Determine if system should be shut down or work must be performed with power source on * Lock out, tag out, try out equipment and related systems * Perform primary and secondary testing on electrical breakers during routine maintenance; replace, update and retro fit breakers * Perform routine tests on high voltage switches and relays, using hi-potential test equipment (Hipot), replace switch or relay * Troubleshoot electric motors using appropriate test equipment * Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system * Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel * Service and maintain electrical systems on various types of overhead cranes * Operate, install electrical systems and perform functional test of building and plant equipment (e.g., machines, motor controls, room re-models) * Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent, halide, standard); clean and check sockets, and replace ballast and bulbs * Run high voltage electrical cable from sub-station to unit station; cut and splice cable, test cable for resistance * Install, replace and repair fiber optic cable for computers and computing systems * Bend conduit and install junction boxes; pull wire of various gauge and color through conduit using a fish tape; install and connect switches and outlets * Check work after completion or after each operation; ensure job is per drawing and WAC, NEC codes; evaluate job for work to be performed (e.g., wire size, electrical load, conduit) * Operate mechanical lifts of various types (e.g. tiger lift, spider lift, snorkel lift), to access work areas * Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in plant electrical systems * Establish/verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters) Physical Demands and Potential Hazards: * Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications * 3+ years of experience as an Electrician or Apprentice. * 1+ years of experience maintaining industrial equipment. * Experience working from heights and using fall protection equipment with weight limitations . * Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift. * Must be able to complete fall protection training. Preferred Qualifications: * Electrician license (EL01 &/or EL 07) or an electrical card. * Crane related experience. * Experience with prime power. Typical Education & Experience: High school graduate or GED preferred. Relocation: * Relocation assistance is not a negotiable benefit for this position. Candidate must live in the immediate are or relocate at their own expense. Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: * This position is for all shifts Total Rewards & Pay Transparency At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $33.32 per hour – $61.01 per hour Applications for this position will be accepted until May. 29, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing’s Global Real Estate and Facilities (GREF) organization is seeking a Senior Mechanical Engineer to join our Facilities Engineering team. This role supports the design, development, procurement, and modification of mechanical systems and infrastructure in Puyallup, WA (Frederickson), while also supporting Auburn, WA. We are seeking dedicated professionals with a strong commitment to ensuring the safety and reliability of our facility systems and equipment. In this critical role, you will specialize in industrial building HVAC systems, steam generation and distribution, compressed air, vacuum systems, chilled water, domestic water, sewer and fire protection systems, chip collection, and building automation systems. You will work collaboratively with a team of skilled engineers, maintenance professionals and operations personnel to enhance and maintain our mechanical systems. Additionally, your expertise will be instrumental in developing long-term strategies aimed at ensuring the sustainability and efficiency of our systems. Position Responsibilities: * Develop moderately complex designs, final designs, and provide maintenance support for the mechanical portions of buildings, equipment installations, utility systems and grounds * Assist others to integrate the activities of multiple engineering disciplines, outside consultants and government agencies * Align designs with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices and materials * Ensure accuracy of drawing archives by reviewing contractor redlines and identifying errors/changes to comply with regulatory requirements, facility standards and record retention requirements * Support construction processes by providing input on vendor selection; review contractor proposals; interface with government/regulatory agencies; monitor project progress and vendor/consultant performance * Prepare and present project information to ensure compliance with applicable construction documents and jurisdictional requirements to meet project objectives * Produce and/or procure detailed design documents using appropriate resources to produce project documents in accordance with project parameters * Coordinate and translate customer requirements into design options with documents and estimates * Identify appropriate materials, equipment, and services by applying engineering principles and methodology * Assist with updating design standards and site-specific operating procedures to establish common practices * With limited supervision, participate in infrastructure planning decision-making process * Plan, manage and execute projects in coordination with Project Managers and Maintenance teammates * Support analysis of current conditions and future requirements; gather data and work with customers in order to identify and assess alternatives and impacts * Collect customer requirements for incorporation into conceptual design * Participate in code research and the development of initial project schedule in order to establish project scope * Assist in the documentation and creation of contract scope * Interpret and analyze applicable regulations, standards, codes and ordinances with respect to project requirements * Offer alternatives to projects to ensure compliance * Provide support, as required, to secure permits Basic Qualifications (Required Skills/Experience): * Bachelor’s degree or higher in Mechanical Engineering or related engineering field * 3+ years of experience with building mechanical systems (i.e. HVAC systems, steam generation and distribution, compressed air, vacuum systems, chilled water, domestic water, sewer and fire protection systems, chip collection, building automation systems, etc.) * 3+ years of experience reading and understanding engineering drawings, blueprints, schematics, and specifications Preferred Qualifications (Desired Skills/Experience): * Professional Engineering (PE) License * 3+ years of experience working in a facilities engineering role in a manufacturing or industrial environment * 3+ years of experience working in a multi-project, multi-disciplinary organization * Experience frequently interacting and collaborating with inter-organizational personnel, including project managers, construction managers, maintenance staff, and contractors * Proficiency with Bluebeam, AutoCAD and Revit software Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Union: This is a union-represented position. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union: This is a union-represented position. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $135,150 - $182,850 Applications for this position will be accepted until Apr. 14, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Machine Repair Mechanic to join our Equipment Services team in various locations across Washington State. As a Machine Repair Mechanic, your expertise will be essential in maintaining and repairing a variety of machine tools and equipment, where precision and attention to detail are paramount. You will be responsible for conducting thorough inspections and implementing preventative maintenance practices to ensure optimal functionality and reliability of all equipment. Your commitment to safety will be reflected in your adherence to SHEA regulations and best practices while guiding and mentoring team members. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: • Install, disassemble, repair, assemble, test, and maintain machine tools, process buildings, and overhead handling equipment, including stationary generator sets at the Kent and Bellevue Data Centers., • Conduct preventative maintenance inspections on stationary generator sets and other equipment., • Ensure compliance with SHEA regulations while performing all tasks., • Guide and mentor lower-classification employees in maintenance, repair, troubleshooting, modification, adjustment, and testing of machines and equipment., • Utilize schematics, blueprints, specifications, manuals, and applicable procedures to complete work assignments effectively., • Develop assembly methods when procedures are not available, documenting these methods for future reference., • Hand scrape, flake, lap, level, and align equipment components as needed., • Use precision devices for failure analysis and apply preventive/predictive technologies to machine and equipment systems., • Perform operational tests on machine tools and building equipment to ensure functionality., • Maintain logs, charts, and records, preparing reports and schedules as required., • Conduct preventive and predictive maintenance inspections to ensure equipment reliability., • Collaborate with other crafts to accomplish tasks and assist as needed., • Perform incidental rigging to facilitate work tasks., • Carry out work in other classifications when necessary to complete assignments. Physical Demands and Potential Hazards: • Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs., • Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting., • Work in environments that may involve contact with metals, solvents, and coolants., • Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards., • Adapt to varying noise levels and atmospheric conditions., • Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: • 3+ years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment)., • Willing to work at heights up to 125 feet above ground level and pass Fall Protection Training. Preferred Qualifications: • Experience testing and diagnosing hydraulic, pneumatic, electromechanical components, and test equipment., • Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams., • Ability to work around electromagnetic fields because of various types of production equipment. Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process. Typical Education & Experience: High school graduate or GED preferred. Relocation: • This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: • This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $46.00/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Jul. 03, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Boeing is a Drug Free Workplace where post offer app

For military servicemembers or veterans, this form is issued by Boeing following review of your Military Occupation Code. Be a student or recent graduate of a certified Boeing Pre-Employment Training course or Military Occupation Code that is certified for the 30005 Aircraft Structures Mechanic role

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington. As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufa

This position is exclusively open to students who have completed Boeing Pre-Employment Training (BPET) certified courses. For students from BPET-certified academic courses, this form is issued by Boeing, following confirmation by your instructor. Boeing is a Drug Free Workplace where post offer appl

At Boeing, we innovate and collaborate to make the world a better place.We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.Boeing Commercial Airplanes is excited to offer opportunities for a .N

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician - Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State. As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount. You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications. Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: • Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications., • Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems., • Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions., • Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages., • Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy., • Comply with all Federal, State, and Company regulations while performing duties., • Collaborate with other crafts to assist in troubleshooting outside the central control system as needed., • Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency., • Communicate relevant information to succeeding shifts using management-approved methods., • Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems., • Maintain equipment records, logs, and updates, preparing reports and schedules as required., • Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion., • Ensure system configurations comply with FAA and accreditation requirements., • Possess working knowledge of software programming languages (e.g., Boolean, ladder, C+, C++) and numbering systems (binary, octal, hexadecimal)., • Understand electronic theory, computer and networking architecture, microprocessors, and discrete components., • Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems., • Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design., • Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes., • Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required., • Perform tasks associated with other job classifications when necessary to complete assignments., • Obtain and maintain applicable licenses, certificates, and certifications., • Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems., • Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards. Physical Demands and Potential Hazards: • Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs., • Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting., • Work in environments that may involve contact with metals, solvents, and coolants., • Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards., • Adapt to varying noise levels and atmospheric conditions., • Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: • 3+ years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance., • 1+ years' experience troubleshooting programmable logic controllers (PLC) OR Functionally Equivalent Control Systems, such as related fields including military, shipboard, aircraft support, weapons systems, or industrial automation platforms., • Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training. Preferred Qualifications: • Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment., • Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams., • Experience working around 3 phase, industrial voltages 480v, 277v, 208v., • Ability to work around electromagnetic fields as a result of various types of production equipment. Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process. Typical Education & Experience: High school graduate or GED preferred. Relocation: • This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: • This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $47.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Mar. 30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

As a Flexible Machining System (FMS) Operator you will have the opportunity to work with advanced CNC technology, ensuring precision and efficiency in the machining process. Prepare for job setup by reviewing work orders, tie-in sheets, operator documents, blueprints, or CATIA plots for production o

As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount. Boeing

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. At the center of BCA's multi-faceted approach to stabilize and improve the Production System, our Production Engineering organization is growing! We are looking to fill a Production Engineering Manager First Level Management (K-Level) position at the Boeing Fabrication site with a qualified and passionate leader in Frederickson, Washington Candidates will be considered for leadership role on teams performing any of the multiple Production Engineering roles (Manufacturing Engineering, Equipment & Tool Engineering, NC Programming), so adaptability and the ability to learn quickly are essential. We are looking for a leader who bring new perspectives, curiosity, and creativity when approaching challenges, and an insatiable desire for improvement. Technical leadership and aptitude is essential for success in these roles along with the people leadership skills to develop and inspire a diverse team to reach a shared goal and vision. Strong candidates will have demonstrated success in developing and maintaining relationships with customers, stakeholders, and peers, as well as strong problem solving skills, willingness to take initiative, and the ability to work across multiple functions to lead the development and implementation of production system solutions. Position Responsibilities: * Manages employees performing engineering and technical activities in the area of Production Engineering. * Develops and executes project and process plans, implements policies and procedures and sets operational goals. * Acquires resources for projects and processes, provides technical management of suppliers and leads process improvements. * Develops and maintains relationships and partnerships with customers, stakeholders, peers, partners and direct reports. * Provides oversight and approval of technical approaches, products and processes. * Manages, develops and motivates employees. This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options. Basic Qualifications (Required Skills/Experience): * Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement * 3+ years of experience in a professional engineering role Preferred Qualifications (Desired Skills/Experience): * 3+ years of experience working in a production environment * 3 + years of experience with production systems design * Experience leading or managing teams * Experience working with cross-functional teams * Experience with build plan development and deployment * ABET accredited Engineering degree Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay and Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $151,300 – $204,700 Applications for this position will be accepted until Mar. 17, 2026 Export Control Requirements: This is not an Export Control position. Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Perform hand finishing of milled spars, spar caps, skins, and small sheet metal parts to specified tolerances and finishes.Use a variety of tools, including files, scrapers, saws, abrasives, and power sanding machines, to remove machine marks and bl Finisher, Team Leader, Finishing, Sheet Metal, Tec

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing's MP&P Engineering (Chemical/Contamination) team is looking for a Mid-Level or Senior levelMP&P Engineer based out of Auburn, Washington. This role supports the chemical processing tank line operations at the Auburn, WA facility and helps to ensure the overall discipline to the Boeing Chemical Process Management program. This is a dynamic position that will allow the successful candidate to have direct impact on Boeing's production system. This role helps maintain compliance with contractual and regulatory obligations. Position Responsibilities: • Assuring operational compliance with specifications, • Documenting tank line production procedures, working production and quality issues (e.g., racking, staining etc.), • Coordinating maintenance downtime and tank dumps with production needs, • Providing technical requirements for tank line modifications and assisting in capital planning, • Coordination with operations, maintenance and vendors with regard to any process improvements, • Promotes standardization across business activities, • Evaluates emerging technologies for potential application to business needs, • Conducts complex analysis to determine performance or reasons for failures of tools, materials, parts or processes, • Implements corrective and preventive actions, • Uses project management tools to meet cost, technical, and schedule requirements, • Incorporates environmental health and safety, LEAN and Quality principles, • Leads others and work statement, assist defining strategies and/or provides consultation Basic Qualifications (Required Skills/Experience): • Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry, • 5+ years of experience in chemical engineering and/or applied chemistry practices, • 2+ years of experience working in a production environment Preferred Qualifications (Desired Skills/Experience): • Experience with tank line operations, • Experience in process engineering, • Strong communication skills – both written & verbal, • Analytical skills, • Adaptability skills, • Experience working in a diverse team, • Experience with complex problem solving, • Experience working with Process Hazard Analysis or similar Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies Shift Work Statement: This position is for 1st shift. Union: This is a union represented position. Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world. Summary pay range for Mid-Level (level 3): $119,850 - $162,150 Summary pay range for Senior (level 4): $146,200 - $197,800 Applications for this position will be accepted until Mar. 17, 2026 Export Control Requirements: This is not an Export Control position. Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Electrician license (EL01 &/or EL 07) or an electrical card. Boeing Commercial Airplanes is excited to offer opportunities for a Industrial Maintenance Electricians, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington. As a Industrial Maintenance Electrician y

Job Description About RTCA: RTCA is a precision aerospace and defense manufacturing group built on decades of hands-on machining expertise, with roots spanning more than 50 years. We support mission-critical commercial and government aerospace programs across North America through four U.S. Centers of Excellence operating as an integrated platform with 150+ CNC machines and a team of 250+ professionals. Unlike large organizations where roles can be narrow, RTCA offers hands-on ownership and real visibility – you understand how your work supports the team, the operation, and the end customer. Our flat structure allows employees to take initiative, grow their skills, and have their contributions recognized, while still providing the stability, advanced technology, and meaningful work of an established aerospace manufacturer. At RTCA, we believe in teamwork, excellence, and delivering with pride. One Team! One Mission! How You’ll Make an Impact: The Supplier Quality Engineer (SQE) manages and develops the external supply base for precision machined aerospace and defense components (including Boeing programs). This is a cross-functional role spanning Quality, Purchasing, and Engineering—not a desk-only position. The SQE acts as an extension of the plant within the supplier network. Responsibilities include driving supplier performance in quality, delivery, cost, and responsiveness, with a focus on special processes (NDT, coatings, heat treat, etc.) and continuous improvement. The role requires comfort on the shop floor, at supplier sites, and with data-driven problem solving. What you’ll be doing as a Supplier Quality Engineer: • Working a full-time, onsite position at our Fife, WA location., • Supplier Quality & Performance Management, • Own supplier quality performance metrics (PPM, OTD, turnaround time, escapes), • Lead root cause analysis and corrective actions (8D, RCCA) with suppliers, • Conduct supplier audits (process, quality system, AS9100 alignment), • Ensure compliance to customer and internal specifications (Boeing, NADCAP, etc.), • Manage supplier approval, qualification, and ongoing performance reviews, • Supplier Development & Continuous Improvement, • Partner with suppliers to improve:, • Lead times / turnaround, • Process capability and yield, • Cost competitiveness, • Drive Lean / CI initiatives within the supply base (flow, batching reduction, WIP control), • Develop long-term supplier relationships and capacity strategies, • Support LTA (Long-Term Agreement) development in coordination with procurement, • Technical & Operational Support, • Review and validate:, • Purchase orders vs. drawings/specifications, • Special process requirements and certifications, • Serve as a technical liaison between RTCA engineering and suppliers, • Assist in resolving day-to-day production and supplier issues impacting schedules, • Support new product introduction (NPI) and first article (FAI) activities, • Cross-Functional Collaboration, • Work closely with:, • Purchasing (supplier selection, negotiations, performance), • Quality (internal/external escapes, audits), • Engineering (process capability, manufacturability), • 5+ years experience in Supplier Quality, Manufacturing Engineering, or Quality Engineering and Aerospace or tightly regulated manufacturing environment., • Strong knowledge of machined parts (CNC turning, milling, tight tolerance components) and Special processes (NDT, heat treat, plating, coatings., • Familiarity with AS9100 quality systems and Boeing or major aerospace OEM requirements., • Proven experience with: Root cause analysis (8D, 5 Whys, Fishbone) and Supplier audits and development., • Ability to read and interpret Engineering drawings, GD&T, Specifications and contracts., • Strong critical thinking and problem-solving capability, • High level of ownership and accountability, • Ability to influence without direct authority (supplier-facing role), • Comfortable working the shop floor and in supplier facilities., • Strong communication skills—can translate technical issues into actionable plans, • Willingness to travel to supplier locations (local and regional primarily) Preferred Qualifications (Education, skills and experience): • Experience working directly with NADCAP-approved processors, • Lean Manufacturing / Continuous Improvement background, • Six Sigma (Green Belt or higher), • Experience supporting LTAs and supplier consolidation strategies, • Medical, dental, and vision insurance coverage., • Choice of medical plan options, including a no-cost employee-only coverage plan, • HSA-eligible health plan with employer contributions, • Basic and supplemental life insurance, • Long-term disability coverage, • 401(k) plan with up to a 6% QACA company match, • Paid time off including vacation, sick time, and nine (9) paid company holidays, • Shift differentials for applicable off-shifts, • Discretionary bonus programs based on position and company performance The Supplier Quality Engineer Compensation range for onsite Washington applicants is $75-95k annually commensurate with experience. Some shifts may include shift differential pay rates. Other site ranges may differ.} Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. RTCA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including sexual orientation and gender identity), national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. Applicants wishing to receive information on RTCA’s Affirmative Action Plans, or those requiring a reasonable accommodation to participate in the application or interview process, should contact the RTCA Human Resources Department. Qualified individuals with disabilities or disabled veterans who are unable or limited in their ability to access or use our career center due to a disability may request a reasonable accommodation by contacting Human Resources. Candidates will receive consideration without discrimination in accordance with Article 9, Chapter XVIII of the City of Los Angeles Municipal Code and applicable federal, state, and local laws.

Preferred Qualifications: * 3+ years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment). As a Machine Repair Mechanic, your expertise will be esse

Basic Qualifications : 3+ years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment). As a Machine Repair Mechanic, your expertise will be essential

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs th

At Boeing, we innovate and collaborate to make the world a better place. The Boeing Test & Evaluation (BT&E) organization is looking for an. The Antenna Test Center is home to the largest fully welded/shielded anechoic chamber in the Boeing Company, a Near Field Scanner and an Electromagnetics Lab.

At Boeing, we innovate and collaborate to make the world a better place. Boeing is seeking an experienced and dedicated Software Certification Engineer to lead our engineering team in the critical mission of developing and certifying safe, reliable, and innovative aircraft. The Software Certificatio