Boeing jobs in St Louis, MissouriCreate job alerts

Job Description Position Summary: We are seeking an experienced Aviation Interior Mechanic to support commercial aircraft interior modification and installation work. The ideal candidate will have strong hands-on experience with interior systems and main cabin installations on Boeing and Airbus aircraft. !!SPECIAL SURGE RATE OFFER!! Now Hiring Aviation Interior Mechanics – Immediate Start (Kansas City, MO) We’re offering a one-month surge rate of $36–$39/hr for qualified Aviation Interior Mechanics, followed by $26–$29/hr after the first month with 40+ hour work week projections. This is an immediate-hire contractor opportunity with 40+ hour work week projections and the highest non-taxable per diem in the market—including on overtime. If you’re looking to maximize earnings up front and lock in steady work, this is a great assignment to jump on. -Job Type: Contractor -Rate: $26-$29/hour, $36-$39/hour first month offer -Location: Kansas City, MO -Hire Date: Immediate -Per diem: we offer the highest non-taxable per diem in the market(including on overtime) -Hours: 40+ hour work week projections. -Tools: toolbox and tools required Position Responsibilities: Remove/reinstall interior linings, cargo bay liners, floor panels Remove/reinstall lavatories, galleys, seats, windscreens Remove/reinstall/adjust doors Use of basic hand tools (i.e. sockets, wrenches, ratchets, screw drivers, pliers, etc.)3+ years’ experience on 737-9, 737-8 and A220Main cabin installsGalley, seat and lavs QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. SKILLS AND KNOWLEDGE: • Good verbal and written communication skills., • Ability to perform basic and intermediate mathematical functions., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • Meet all regulatory requirements per FAR 65., • Proficiency in relevant specialty of aircraft. EDUCATION AND/OR EXPERIENCE: • High School Diploma or equivalent., • Airframe and/or Power plant License preferred ENVIRONMENT: • The noise level in this work environment is usually moderate to high., • This position requires use of a respirator. PHYSICAL EFFORT AND DEXTERITY: • While performing the duties of this job, the employee will be required to sit; use their hands and arms; and talk, • or hear; and focus on objects close., • Ability to handle and climb ladders and aircraft stairs.

Job Description CNC Machinist St. Louis, MO Full-time, on-site Hourly/Non-exempt Description Kemco Aerospace is a manufacturing organization working closely with large aircraft and weapon systems OEMs, such as Boeing Defense, RTX/Collins Aerospace, Bell, Northrop Grumman and several others to deliver complex design-to-build and build-to print assemblies. Kemco Aerospace provides these assemblies in support of in-service platforms, such as: H-47, V-22, F-35, F-15, F-16, F-18, KC-135, E-2, and weapon systems such as Harpoon and SLAM-ER. Kemco Aerospace is part of the Crestview Aerospace family which is comprised of two (2) manufacturing sites, with operations in St. Louis, Missouri and Crestview, FL, and employs approximately 350 professionals. Kemco is seeking highly skilled team members to support the manufacturing operations. Our facility is open 7 days a week and utilizes 4 shifts to maximize production across the full week. Shift premiums are offered on 2nd, 3rd and weekend shifts. Seeking applicants for ALL shifts. • 1st shift - Monday-Friday 6 a.m. to 2:30 p.m., • 2nd shift - Monday-Friday 2 p.m. to 10:30 p.m. and pays 10% shift premium, • 3rd shift - Monday - Thursday 10 p.m. to 8:30 a.m. (4 ten-hour shifts) and pays15% premium over base rate for this shift, • Experience in Aerospace Manufacturing setting up and operating CNC machining 3/4/5 axis mills is preferred, • Trade or technical school degree or equivalent experience preferred, • Must be able to read and understand blueprints and written directives, • Experience inspecting/auditing machine setups and inspection reports, • Experience inspecting work produced, including 1st piece inspection, using micrometers, bore gauges, calipers, • Must be able to work safely following all rules and requirements, • Willingness to continuously improve quality and productivity, • Willingness to work in a fast-paced work environment Qualified applicant must pass drug & background check for consideration. Hourly rate is commensurate with experience. Kemco Aerospace is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Job Description Director of Operations St. Louis, MO Full-time, On-site Salary/Exempt Kemco Aerospace Overview Kemco Aerospace is a manufacturing organization working closely with large aircraft and weapon systems OEMs, such as Boeing Defense, RTX/Collins Aerospace, Bell, Northrop Grumman and several others to deliver complex design-to-build and build-to print assemblies. Kemco Aerospace provides these assemblies in support of in-service platforms, such as: H-47, V-22, F-35, F-15, F-16, F-18, KC-135, E-2, and weapon systems such as Harpoon and SLAM-ER. Kemco Aerospace is part of the Crestview Aerospace family which is comprised of two (2) manufacturing sites, with operations in St. Louis, Missouri and Crestview, FL, and employs approximately 350 professionals. Essential Job Functions The Director of Operations is a senior leadership role responsible for overseeing all operational aspects of an aerospace manufacturing facility with a core focus on engineering, CNC machining, precision manufacturing, and assembly operations. This role provides strategic and tactical leadership across Operations, Engineering, and CNC Programming to ensure safety, quality, delivery, and cost objectives are consistently met. The Director of Operations drives continuous improvement, operational excellence, and cross-functional alignment to support company growth and customer satisfaction. Principal Responsibilities and Accountabilities: • Provide executive-level oversight of daily manufacturing operations, including engineering, programming, CNC machining, fabrication, assembly, and inspection., • Develop and execute operational strategies that support company goals for productivity, quality, and profitability., • Establish and maintain KPIs focused on throughput, capacity utilization, efficiency, scrap reduction, and on-time delivery., • Lead and enforce a strong culture of safety, compliance, technological innovation and accountability., • Direct the activities of the Engineering and CNC Programming departments, ensuring cost-effective and quality focused process plans that utilize the technology available to ensure best outcome for Company and Customer., • Ensure engineering change processes are well-controlled and fully integrated with production planning., • Collaborate with engineering leads within Customer base to improve manufacturability (DFM), reduce cycle times, and enhance process reliability., • Lead Lean, Six Sigma, and other continuous improvement initiatives to streamline processes and reduce waste., • Identify and implement advanced manufacturing technologies, automation opportunities, and process innovations., • Develop long-term capacity planning, equipment investment strategies, and workforce development plans., • Work closely with Quality Assurance to ensure compliance with AS9100, customer requirements, and industry regulations., • Coordinate with Sales, Program Management, and Customer Service teams to align operational capabilities with customer expectations., • Build and mentor a high-performance team across operations, engineering, and programming. Required • Bachelor's degree in engineering, Manufacturing, Operations Management, or a related field. Relative experience may be substituted for degree., • 10+ years of progressive leadership experience in aerospace or high-precision manufacturing., • Extensive knowledge of CNC machining processes, equipment, tooling, and programming., • Proven experience managing engineering and/or CNC programming departments., • Master's degree in engineering, Business, or related discipline., • Familiarity with ERP/MRP systems such as Epicor, SAP, or JobBOSS., • Certifications such as PMP, Six Sigma Black Belt, or Lean certification., • Strong understanding of AS9100 or equivalent aerospace quality standards Work Environment: • Primarily works in a manufacturing setting with exposure to machinery and production equipment., • Requires standing for extended periods and occasional lifting of materials. Physical Requirements: Primarily manufacturing/assembly environment. Must be able to work in the following environmental conditions: noise, vibration, proximity to moving mechanical parts, moving vehicles, electrical current. Must be able to bend and reach. Must have close visual acuity such as viewing a computer terminal, extensive reading, visual inspection involving small defects, small parts, and/or operation of machines, and/or assembly or fabrication parts at close distance to the eyes. Must be able to communicate effectively. Must be able to maneuver up to 20 pounds. Will be performing substantial movements (motions) of the wrists, hands, and/or fingers. Kemco Aerospace is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Job Description Procurement & Inventory Control Specialist St. Louis, MO Full-time, On-site Hourly/Non-exempt Kemco Aerospace Overview Kemco Aerospace is a manufacturing organization working closely with large aircraft and weapon systems OEMs, such as Boeing Defense, Bell, RTX/Collins Aerospace, Northrop Grumman and several others to deliver complex design-to-build and build-to print assemblies. Kemco Aerospace provides these assemblies in support of in-service platforms, such as: H-47, V-22, F-35, F-15, F-16, F-18, KC-135, E-2, and weapon systems such as Harpoon and SLAM-ER. Kemco Aerospace is part of the Crestview Aerospace family which is comprised of two (2) manufacturing sites, with operations in St. Louis, Missouri and Crestview, Florida, and employs approximately 350 professionals. Principal Responsibilities and Accountabilities: • Maintain an organized tool room, ensuring accurate inventory records, safe care of materials, and a safe working environment, • Manage tool and consumable stock levels, including replenishment requisitions, reordering broken or depleted tools, and calibration service orders, • Receive, identify, unpack, label, store, and distribute materials and tooling throughout the facility, including loading and unloading from trucks, • Perform and oversee physical and cycle inventory counts, reconciliation, and investigate count discrepancies and quality non-conformance issues related to tooling, • Source materials, supplies, and services to support operational requirements, including development of RFQ/RFI/RFPs, proposal review, negotiation, contract execution, and supplier selection, • Develop and monitor category strategies, tactical plans, and cost reduction initiatives for assigned commodities, • Analyze market dynamics, price trends, and supplier data to establish price objectives and determine lowest cost consistent with quality, reliability, and schedule requirements, • Develop and manage effective supplier relationships, including resolution of price, quality, delivery, and invoice issues, • Monitor supplier performance and collaborate with the Quality team to develop remediation plans as needed, • Communicate material shortages and potential supply problems to Manufacturing and Purchasing; maintain promised deliveries to schedule, • Support Manufacturing, Assembly, and Inventory Control on workflow issues; update work orders, logs, serial numbers, queue sheets, and other tracking systems, • Track and report cost improvement results for assigned categories, • Associate's Degree in Supply Chain Management, Business Administration, Operations Management, or a closely related field, • Equivalent combination of education and directly applicable work experience will be considered in lieu of a degree, • Bachelor's Degree in Supply Chain Management, Business Administration, Industrial Engineering, or related discipline, preferred, • Coursework or certification in Logistics, Materials Management, or Quality Systems is a plus, • 2+ years of experience in aerospace, defense, or government-regulated manufacturing (AS9100 or equivalent environment), • Experience sourcing and negotiating with suppliers, including development and evaluation of RFQs, RFIs, and RFPs Physical Requirements: Primarily manufacturing/assembly environment. Must be able to work in the following environmental conditions: noise, vibration, proximity to moving mechanical parts, moving vehicles, electrical current. Must be able to bend and reach. Must have close visual acuity such as viewing a computer terminal, extensive reading, visual inspection involving small defects, small parts, and/or operation of machines, and/or assembly or fabrication parts at close distance to the eyes. Must be able to communicate effectively. Must be able to maneuver up to 20 pounds. Will be performing substantial movements (motions) of the wrists, hands, and/or fingers. Pre-Employment Screening: All candidates receiving an offer for employment will be required to submit to pre-employment screening for this position. The screenings will include a criminal background check and drug screen. All offers are contingent upon successful completion of required screening. Kemco Aerospace is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Job Description Quality Inspector St. Louis, MO On-site Hourly - 1st and 2nd shift Description Kemco Aerospace is seeking an ambitious Quality Inspector to assist our Quality Department for our St. Louis, MO site, as detailed below. Kemco Aerospace is a manufacturer of complex assemblies and precision components for use in a wide range of aerospace and defense applications. Our company works closely with large aircraft and weapon systems OEMs, such as Boeing Defense, Bell, RTX/Collins Aerospace, Northrop Grumman and several others. Crestview Aerospace provides key assemblies for many in-service platforms (H-47, V-22, F-35, F-15, F-16, F-18, KC-135, E-2, and weapon systems such as Harpoon and SLAM-ER. Kemco Aerospace/Crestview Aerospace is comprised of two (2) manufacturing sites, with operations in St. Louis, Missouri and Crestview, FL, and employs approximately 350 professionals. Job Overview We are seeking a detail-oriented and motivated Quality Inspector to support the inspection of precision-machined parts in a fast-paced manufacturing environment. This role focuses heavily on hands-on inspection and measurement, ensuring products meet engineering specifications and quality standards. The ideal candidate is reliable, efficient, and comfortable working independently while maintaining a strong commitment to accuracy and quality. Key Responsibilities • Perform first-article, in-process, roaming, and final inspections on precision-machined parts, • Use a wide range of inspection and measurement tools daily; inspection activities comprise 90% or more of the role, • Read and interpret engineering prints, drawings, and specifications to verify product requirements, • Conduct detailed visual and dimensional inspections to identify defects or non-conformances, • Accurately document inspection results and complete required quality records and forms, • Communicate inspection findings to the quality, production, and engineering teams as needed, • Strong ability to read and interpret engineering prints and technical documentation, • Proficiency with measurement and inspection tools, including micrometers, calipers, comparators, thread plugs, and plug gauges, • Exceptional attention to detail in both measurement and documentation, • Excellent visual acuity and ability to identify defects, • Ability to maintain focus and accuracy in a fast-paced, distraction-prone environment, • Efficiency-driven mindset with strong time-management skills, • Self-motivated and able to work with minimal supervision, • Ability to read, understand, and follow SOPs, specifications, and inspection forms, • Quick learner with a high level of trainability, • High school diploma or equivalent required; technical training or certification preferred, • Experience in a machining environment (quality or production) preferred, • Familiarity with quality inspection processes and techniques Crestview Aerospace/Kemco Aerospace is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing’s Government Training Engineering (GTE) team is looking for a Senior Systems Engineering Manager for our St Louis, MO location to support a variety of platforms in our Air Dominance (AD) portfolio. This role includes oversight of the Systems Engineering, Integration & Test (SEIT) teams supporting the Aircrew and Maintenance training for a variety of platforms in the Air Dominance (AD) portfolio: including the F-15 (Eagle), F/A-18 (Hornet), T-7 (Redhawk), T-45 (Goshawk), MQ-25 (Stingray), and Proprietary platforms. Position Responsibilities: Management and oversight of 7 Systems Engineering First Line leaders and ~150 Systems Engineers & Analysts Requirements, Architecture & Design System & Sub-system Integration & Verification System Validation & Mission Assurance Ensure cross-functional team performance & on-time delivery within allocated budgets Staffing, onboarding & development strategy for the Systems Engineering organization, in alignment with other Systems Engineering Sr. managers Define and manage SEIT metrics to ensure effective and efficient execution of programs Support proposal development for all AD proposals with SEIT scope and provide approvals in support of ESGP Gates and BGS Engineering Commitment Review (ECR) Basic Qualifications (Required Skills/Experience): Bachelor’s degree or higher from an accredited course of study 5+ years of engineering/technical experience on aircraft, mission systems or training solutions 1+ years of the experience working with agile development at scale (e.g. SAFe or similar) 3+ years of engineering management experience Ability to travel up to 15% of the time Preferred Qualifications (Desired Skills/Experience): Bachelor’s degree or higher from an accredited course of study in engineering, computer science, mathematics, physics or chemistry 3+ years of engineering management experience 3+ years of experience leading cross-functional teams 3+ years of experience working with customers and/or suppliers Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. GENERAL: All information provided will be checked and may be verified. Please apply ASAP for this role as recruitment may commence before the end date. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $198,900 – $269,100 Applications for this position will be accepted until May. 28, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place.We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.The Boeing Company is currently seeking.Open Architect

Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement. Exper

Lead tool selection, trade studies, and modernization efforts—balancing security, scale, and developer productivity. Basic Qualifications (Required Skills/ Experience): Bachelor’s Degree 10+ years’ experience with software engineering 3+ years’ experience with scripting languages such as Bas

Basic Qualifications (Required Skills/Experience) Bachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science 4+ years related work experience

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is currently seeking Senior Platform Software Engineers to join a proprietary Air Dominance program in Berkeley, MO. This position will focus on supporting the Boeing Defense, Space & Security (BDS) business organization. The primary statement of work for this team is to ensure successful integration of various software products into a consistent DevSecOps framework. Because of the unique requirements of this role, the team is seeking various skillsets, and the chosen candidates’ specific statement of work will be determined based on their background, interests, and the team’s needs. Consider applying for this requisition if you meet the basic qualifications and have interest in any combination of the following tasks: Streamlining tools for software build, test, integration, automation, etc. to remove waste and inefficiency in the engineering lifecycle Working with product teams to identify their unique requirements for software tooling and DevSecOps Working with tools/services such as AWS, Azure, Kubernetes, GitLab CI and components, static code analysis tools, etc. Analyzing safety-critical software to ensure compliance and programmatic benchmarks are met Working cross-functionally to solve complex engineering problems Position Responsibilities: Working cross-functionally to solve complex engineering problems Develops and maintains code and integrates software components into a fully functional software system Works with internal and external customers to remove technical blockers and support efficient development of their products Documents roadmaps, plans, and technical requirements to deliver upon key objectives Coaches earlier-career software engineers in industry best practices Works on an agile team to accomplish team goals Executes and documents software research and development projects Works under general direction This position requires the ability to obtain a Secret U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship . Ability to obtain Secret U.S. Security Clearance Post-Start. Basic Qualifications (Required Skills/ Experience): Bachelor’s Degree Ability to obtain a U.S. Secret Security Clearance for which the U.S. Government requires U.S. Citizenship. Ability to obtain Secret U.S. Security clearance (Post-Start) 9+ years of experience programming in C, C++, C#, Python, Java, or Ada (or an equivalent combination of technical education and experience) 6+ years of experience working on an Agile team using Agile methodologies and tools such as Jira 6+ years of professional experience in Defense/Aerospace OR working with DevSecOps technologies such as Kubernetes, Cloud services, GitLab, Terraform, etc. Ability to work in a multi-tasking environment while supporting multiple concurrent activities Ability to work effectively in a collaborative team environment Mentorship/coaching abilities Excellent roadmapping, documentation, and communication skills Mastery of multiple DevSecOps tools/technologies (AWS, Azure, Terraform, GitLab CI and Components, build systems, SonarQube, etc.) Preferred Qualifications (Desired Skills/Experience): Bachelor of Science degree from an accredited course of study, in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science and 9 years of related work experience OR Bachelor’s Degree and 13+ years of directly related work experience OR 17+ years of related relevant experience Knowledge or experience in the defense or avionics industry Knowledge of networking principles Knowledge of required levels of rigor for safety-critical software Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. CodeVue Coding Challenge: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $160,650.00 - $217,350.00. Potential signing bonus for eligible/qualified external candidates. Applications for this position will be accepted until May. 20, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Secret clearance, final post-start2+ years of experience in testing or programming software written in C or C++2+ years of experience in real-time, near real-time, or embedded systems2+ years of experience with release tools (Azure DevOps, Artifactory, Gitlab, Maven), configuration management, monit

Mentor and provide technical oversight to junior engineers and technicians; ensure adherence to engineering processes, quality standards, and configuration control. The Senior LO Mission Systems Integration Engineer will lead design, integration, analysis, test, and production activities for low obs

Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement. Systems Engineer (Mid-Level & Senior). The role emph

Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science. The organization is seeking software engineers to perform software design and deve

Bachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science. Senior Systems Health & Integrated Diagnostics Engineer. This role encompasse

Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science and 2+ years of related work experience. Bachelor of Science degree from an accredi

Job Description Career Transition Opportunity: To Commercial Furniture Craftsmanship Fairway Holdings, Inc. stands in solidarity with the talented technicians and operators affected by the recent Spirit Airlines shutdown. We recognize that your background in aviation means you possess a level of precision that is rare in the general labor market. Even if you are not from the aviation industry and are an experienced cabinet builder or finisher, we are looking for you, too! We are hiring immediately to integrate your expertise into our high-end commercial furniture manufacturing teams. Millwork Builder (Aircraft Cabinet Makers / Finishers) • The Fit: We are looking for the "Gold Standard." If you have built or repaired cabins for Boeing or Airbus, you possess the exact tolerance levels required for our retail and hospitality projects., • Transferable Skills: High-precision assembly, working with laminates/veneers/composites, and reading complex blueprints., • Key Responsibilities:, • Set up and operation of specialized machinery (jointers, tenoners, molders, and shapers)., • Precision joinery: gluing, fitting, and clamping subassemblies to form seamless units., • Mastery of aesthetics: matching wood grain, color, and texture for high-end finishes. Why Fairway Holdings? We offer a "Work-Life Balance" schedule designed for professionals: • The 4/10 Schedule: Work 10-hour days, Monday–Thursday., • Three-Day Weekends: Every Friday, Saturday, and Sunday OFF., • Full Benefits: Medical, Dental, and Vision coverage., • Future Security: 401(k) with company matching., • Perks: Paid Vacation, Holidays, Personal Time, and Secured Free Parking. Don't just look for a job—leverage your aviation expertise into a lasting career.

Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry. This position supports a cross-functional engineering team, primarily comprising software engineering, and there will be opportunit

Bachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science. Support/lead development and provide quality review for EVMF deliverables in coll

Help adopt and use modern systems engineering methods (for example, Model-Based Systems Engineering). Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifica

Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science and 5+ years of related work experience. Mentor and coach junior engineers in softw

Basic Qualifications (Required Skills and Experience): * Do you have a Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work

At Boeing, we innovate and collaborate to make the world a better place.We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.BDS is a global leader in the development, production, maintenance and enh

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is seeking a Systems Engineer (Mid-Level & Senior) to serve as the SCARS focal-leading adoption, interpretation, and enforcement of Simulator Common Architecture Requirements and Standards (SCARS) across the F-15 USAF simulator programs in Berkeley, MO . The role emphasizes systems requirements engineering, standards harmonization, and cross-program governance to ensure simulator architectures meet SCARS guidance when possible and enable interoperability, reusability, and sustainment. F-15 Training Systems provides trainers to USAF facilities throughout the US and at OCONUS locations to support warfighters. The F-15 Training systems include high fidelity cockpits with immersive visualization systems, high fidelity computer generated forces to provide synthetic opponents to train against, and applications providing instructors control over training setup, execution and post-training debrief. Position Responsibilities: * Serve as the program SCARS focal and technical authority for simulator architecture standards and required artifacts * Develop, review, and enforce system-level requirements, ICDs, and compliance matrices ensuring alignment to SCARS * Translate SCARS standards into program-specific requirements and acceptance criteria; maintain traceability * Coordinate with program systems engineers, software, simulation/Distributed Mission Operations (DMO) leads, and Program Managers to drive standards adoption * Lead conformance reviews, audits, and gap analyses; generate remediation plans and verification strategies * Maintain and evolve SCARS artifacts, templates, and guidance * Provide subject-matter expertise during design reviews, integration planning, and supplier/vendor compliance checks * Mentor junior systems engineers on requirements best practices, MBSE/SysML usage, and verification traceability * Support accreditation, cybersecurity, and configuration management activities tied to SCARS compliance Special Program Access or other Government Access Requirements may be required for these positions. Basic Qualifications (Required Skills/Experience): * Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement * 5+ years' systems engineering experience with emphasis on system requirements development, management, and verification * Experience authoring and reviewing high-quality system requirements, ICDs, and compliance matrices * Experience with management and requirements traceability * Excellent written/oral communication with ability to produce standards artifacts and lead cross-functional reviews Preferred Qualifications (Desired Skills/Experience): * 9 or more years' related work experience or an equivalent combination of higher education and experience (Senior Level 4) * Boeing or defense simulation standards experience, SCARS exposure preferred. * Experience with simulator architectures, DMO/Live, Virtual and Constructive (LVC) concepts, HLA/DIS/CIGI or similar standards * Experience with MBSE/SysML tools and requirements management tools (e.g., DOORS) * Experience with verification/validation planning, test-case derivation from requirements, and after action review artifacts Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range Mid-Level (Level 3): $112,200- $151,800 Summary Pay Range Senior (Level 4): $136,850- $185,150 Applications for this position will be accepted until May. 21, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry (e. Education/experien

Master's degree in Electrical Engineering, Aerospace Engineering, Physics, or a related field. Low Observables Mission Systems Integration Engineer. This role requires technical leadership and collaboration across various engineering disciplines to ensure the successful integration of low observable

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, engineering data science, mathematics, physics or chemistry (e. Education/experience typically acquired through advanced technical education from an accre

Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement. Mentor, coach and advise engineers across the program in

Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement. This individual will be a self-motivated Systems or Soft

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.Boeing Defense Space & Security is seeking a Mid-Level or Senior Systems Engineer to join us as part of our Advanced Airborne Sensor (AAS) In-Service and Project Engineering team located in Richardson, TX or Berkeley, MO.The Advanced Airborne Sensor is a multi-function radar used on the P-8 Poseidon. The team is responsible for developing and performing engineering for production, sustainment, modification and improvements of military and commercial derivative aircraft. This position will work closely with the supply chain, suppliers, program manager, contracts, estimating, engineering, and/or customers to execute the program. In this role you integrate technical requirements and schedule demands with suppliers, coordinate engineering support throughout the lifecycle of the product, manage a diverse set of projects, and lead proposal development. Primary ResponsibilitiesProvide technical leadership and day-to-day management of suppliers, including regular engagement with supply chain to monitor and improve supplier performance. Serve as Equipment Manager for multiple sub assemblies.Build and sustain strong partnerships with suppliers, customers, stakeholders, and cross-functional peers.Communicate program status, key risks, issues, and opportunities to customers and leadership, and clearly articulate required support or decisions.Develop clear, compliant supplier statements of work (SSOW) for ongoing and new requirements, and lead execution to ensure on-time, on-scope delivery.Collaborate with customers to define technical requirements and translate them into actionable delivery plans.Generate an effective set of metrics to communicate status of contract deliverables.Manage program deliverables by developing risk-mitigation strategies, tracking issues and opportunities, and monitoring baseline plans to evaluate project performance and capture lessons learned.Communicate technical issues/changes via Change Control Boards and/or Chief Engineer CouncilResolve technical problems by coordinating between engineering, operations, and suppliers to implement effective solutions.Support proposal development efforts, including competitive cost estimating, schedule development, and delivery commitments.Track and report progress against cost, schedule, and technical performance using Boeing Program Management Best Practices (PMBP) and Earned Value Management (EVM).Provide additional program support as needed, such as responding to Corrective Action Requests (CARs), supporting export compliance, and leading lean/process improvement initiatives. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Security Clearance and/ or Export ControlThis position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required) and ability to obtain a Top Secret Clearance. (A U.S. Security Clearance that has been active in the past 24 months is considered active). Security Clearance and/or Special Program Access or other Government Access requirements are mandatory for this position. Certain Special Programs require that the candidate have only U.S. Citizenship or no dual citizenship. Much of the work at The Boeing Company is of a classified nature and many positions require a security clearance, the granting of which is at the discretion of Government authorities. A final security clearance is mandatory for this position prior to start. If you cannot or do not obtain the required final Security Clearance and/or Special Program Access or other Government Access requirements in a time frame established by program management, this offer may be withdrawn. Once your clearances are granted, if they are not maintained, the result may be reassignment, reclassification, or termination of employment. Basic Qualifications (Required Skills & Experience)Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry3 or more years of related work experience5 or more years of experience as a systems engineer with technical knowledge on aircraft subsystems (mechanical and/or electrical)Experience managing supplier performance and/or requirements flow-downTravel Up to 20% travel required Preferred Qualifications5 or more years' related work experience or an equivalent combination of education and experienceExcellent written and oral communication, presentation, and interpersonal skillsExperience with customer proposals and contracting processExperience in Earned Value Management Relocation:This position offers relocation based on candidate eligibility. Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Shift:This position is for 1st shift. Occasional alternative shifts as need At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Please note that the salary information shown below is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Mid-Level: $112,200 - 162,150Summary pay range for Senior:$136,850 - 197,800 Applications for this position will be accepted until May. 18, 2026 Export Control Requirements:This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationThis position offers relocation based on candidate eligibility.Security ClearanceThis position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shift Equal Opportunity Employer:Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. We are seeking a Low Observables (LO) Design & Integration Engineer to support design and analysis activities for stealth/low-signature systems. The engineer will perform LO material and structure design, electromagnetic analysis, integration and test support, data processing, and technical reporting. The role requires practical experience with LO materials and technologies, solid electromagnetics knowledge, and hands-on expertise with computational electromagnetic (CEM) solvers used to design and optimize LO solutions. Key Responsibilities * Perform design and analysis tasks for LO materials, coatings, treatments, and structural treatments to minimize radar, infrared, and other signatures. * Develop and validate LO integration concepts for aircraft/vehicle structures and subsystems, including manufacturability and testability considerations. * Use CEM solvers to model, simulate, and optimize LO components and systems (e.g., surface treatments, RAM, apertures, seams, RAM-structure interactions). * Perform sensitivity studies and trade-offs across materials, geometry, and integration approaches to meet system-level LO requirements. * Process and analyze measured test data from laboratory and flight/field tests; compare test results to simulation and iterate designs. * Produce technical documentation: detailed analysis reports, integration guidance, test plans, and summaries suitable for engineering and program management audiences. * Communicate technical results and recommendations to multidisciplinary teams and support design reviews. * Support manufacturing and test engineering to ensure LO design intent is preserved through fabrication and verification. Required Qualifications * Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement * 5 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. * 2 years' experience with LO integration and design, manufacturing considerations, and test support for aerospace or defense systems. * Active Top Secret Clearance * Ability to obtain Special Program Access (U.S. Only Citizenship required) Preferred Qualifications * Strong understanding of electromagnetic principles relevant to radar cross section (RCS), scattering, absorption, reflection, aperture coupling, and material electromagnetic properties. * Proficiency using computational electromagnetic (CEM) solvers and tools to design and optimize LO systems. Examples include but are not limited to: ANSYS HFSS, CST Microwave Studio, FEKO, SIE/PO and/or in-house CEM codes . * Data processing and analysis skills using scripting and numerical tools (e.g., Python, MATLAB, NumPy, SciPy) to manipulate simulation and test datasets, perform post-processing, and generate plots. * Strong technical writing and documentation skills; ability to produce clear, concise technical reports, test plans, and presentations. * Ability to work collaboratively across multidisciplinary teams and communicate technical trade-offs effectively. * Experience with material characterization techniques for LO materials (e.g., permittivity/permeability extraction, reflectivity/absorptivity measurements, THz/IR material characterization). * Familiarity with manufacturing processes and quality controls for LO coatings and structural treatments. * Experience with system-level signature analysis, multi-physics simulation, and measurement-to-model correlation workflows. * Familiarity with configuration management, data versioning, and standard engineering tools (e.g., CAD, PLM systems). Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Pay and Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: * Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting * Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. * Potential signing bonus for eligible/qualified external candidates Summary pay range: Level 3: $112,200-$151,800 Applications for this position will be accepted until May. 29, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active). This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) organization is seeking an Experienced / Senior Ground Loads Engineer to support Air Dominance programs in St. Louis, Missouri . As a member of the BDS Air Dominance Loads & Dynamics (L&D) Capability Team, you will be part of a core engineering team directly supporting production and development programs including F-15, F/A-18, T-7A, MQ-25, and proprietary programs. The L&D team is looking for individuals with experience ground loads. Position commensurate with experience. Position Responsibilities * Lead in developing air vehicle design criteria for ground loads * Collaborate with the airframe & subsystems design and analysis engineers to generate integrated aerodynamic, structural, and landing gear models for flight vehicle analysis consistent with a Model Based Engineering (MBE) environment * Perform ground loads analyses (ground handling, taxi, takeoff & landing, etc.) to support air vehicle design and stores integration * Define allowable flight envelopes and operational limits * Develop flight and ground test plans * Create finite element and multi-body dynamics models and correlates to test results * Execute ground and flight test programs by the development of test requirements, providing data for pre-test analysis, monitoring testing, data analysis and documenting results, in order to support design and verification of vehicle and components * Review and approve airframe and subsystems hardware packages for airworthiness and to ensure the air vehicle meets the service environment * Provide data to support the definition and documentation of structural design requirements for the service life of the product, to ensure company, customer and regulatory requirements are met * Present engineering to management and customers during program level reviews and other technical meetings Basic Qualifications (Required Skill/Experience) * Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement * 5 or more years' related work experience or an equivalent combination of technical education and experience * This position requires the ability to obtain a U.S Security Clearance for which the US Government requires US Citizenship . An interim and/or final U.S. Secret Clearance Post-Start is required Preferred Qualifications * Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience * 5+ years of experience with aircraft loads with an emphasis on ground loads * Active U.S. Secret Clearance * Experience in one or more of the following: aircraft modeling and simulation, aircraft flight and/or ground testing, multi-body dynamics (MBD) modeling and analysis * Experience leading teams or projects * Experience using NASTRAN or ADAMS * Proficiency in one or more higher-level programming languages such as C, Fortran, MATLAB, python, or similar * Possess interpersonal communication (written & verbal) skills in a team-oriented environment Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: Level 3: $103,700 - $140,300 Level 4: $126,650 - $171,350 Applications for this position will be accepted until May. 21, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) - Phantom Works organization is seeking a Senior Low Observables (LO) Design & Integration Engineer to lead design and analysis activities supporting the fabrication and test of an RCS pole model. The successful candidate will apply deep expertise in LO materials, integration, manufacturing, computational electromagnetic (CEM) modelling, and test support to design, build and test a representative pole model for an advanced next generation program in the St. Louis region. Key Responsibilities: * Lead detailed LO design and integration for the RCS pole model, including material selection, incorporation of advanced technologies, supplier hardware integration. * Use computational electromagnetic solvers to model, analyze, and optimize radar cross section (RCS) and scattering behavior across required frequency bands and aspect angles in support of pre-test predictions and diagnostics. * Work with Manufacturing to ensure proper alignment between design, analysis and fabrication of LO components. * Define and support fabrication processes, QA checks, and build plans for LO skins, coatings, RAM treatments, and attachments; identify and mitigate manufacturability risks, provide LO liaison support to the shop. * Develop and execute test plans for RCS characterization (anechoic chamber and outdoor ranges), including instrumentation, calibration, and measurement repeatability considerations. * Prepare and execute data processing workflows to reduce, calibrate, and analyze measured RCS and related EM test data; combine simulation and measurement data for validation and design iteration. * Produce clear technical documentation: design descriptions, analysis reports, test plans, test reports, procedures, and presentation materials for program reviews. * Mentor junior engineers and support continuous improvement of LO design, test, and data processing practices. Working Conditions and Physical Requirements: * Hands-on support in fabrication or test setups may be required. * Will require travel to other company locations, supplier facilities, fabrication shops, and test ranges (including anechoic chambers and outdoor ranges). Basic Qualifications (Required Skills and Experience): * B achelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement * Professional experience working with low observable materials and technologies, including hands-on exposure to LO integration, design, manufacturing, and test * Demonstrated experience using computational electromagnetic solvers (e.g., FEKO, HFSS, CST, WIPL-D, CARLOS, SENTRI, XPATCH or equivalent) for design and optimization of LO systems and RCS predictions * Strong understanding of electromagnetic principles relevant to scattering, phenomena, and Radar Cross Section * Proven track record supporting fabrication and testing of LO components/assemblies and correlating measurements to models * Proficiency in data processing and analysis of RCS/EM test data, including calibration, clutter and background rejection, and data visualization techniques * Excellent technical writing skills with experience producing engineering reports, test plans, and test reports * Active U.S. Top Secret Security Clearance * Ability to obtain Special Program Access (U.S. Only Citizenship required) Preferred Qualifications (Desired Skills and Experience): * Advanced degree (MS/PhD) in a relevant discipline * Past experience with RCS pole models and range testing * Experience with material characterization techniques * Knowledge of LO materials and application processes, as well as nondestructive inspection methods for LO components * Familiarity with CAD tools and integration with CEM workflows * Effective verbal communication and collaboration skills; ability to lead technical discussions and interface with suppliers, customers, leadership and test facility personnel. Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Signing Bonus: Potential signing bonus for eligible/qualified external candidates Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: * Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting * Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $136,850- $185,150 Applications for this position will be accepted until May. 26, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active). This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Global Serives(BGS) is currently looking for an Electrical Automated Test Engineer to join their team in Berkeley, MO. This position is available in the Automated Test Equipment group within Boeing Engineering, Support and Sustainment, which is part of Boeing Global Services (BGS). Our teams are currently hiring for a broad range of experience levels including Associate and Mid-Level Electrical Automated Test Engineers. Position Responsibilities: * Design electrical support hardware for multiple platforms conforming to various specifications, both military and commercial. Design would be, but not limited to, interface cables, test panels, electrical test sets, electronic testers, and interface devices * Work from a requirement and convert that requirement into high quality Automated Test hardware * Create requirements to write Test Program Sets (TPS) to test a Unit Under Test (UUT) * Develop supplier procurement packages * Interface with multiple disciplines, including Supplier Management and Procurement, Logistics Engineering, Technical Publications, Training, Quality Assurance, and others * Generate estimates and statements of work to support customer proposals * Demonstrate knowledge/experience with DSP card design or other circuit board design * Accomplish equipment design, generate drawings, and support hardware fabrication, integration and testing * Investigate emerging technologies to develop concepts for future product designs to meet projected requirements * Support fielded hardware and software over the entire product lifecycle * Assist suppliers with fabricating to our engineering drawings * This job includes working with both internal and external customers * This position will require a candidate that is a self-starter with initiative, as the candidate must be able to work independently while effectively coordinating with stakeholders to ensure timely completion of tasks Some travel may be required to accomplish necessary technical communications or install and/or troubleshooting of equipment, including international travel to Saudi Arabia and South Korea. Basic Qualifications (Required Skills/Experience): * Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement * Proficiency in either C, C++, or C# * 1+ years of experience with electronic systems engineering Preferred Qualifications (Desired Skills/Experience): * 3+ years of higher education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.) * Experience with modern Automatic Test System and Test Program Set hardware and software * Experience programing in C++ * Experience in electrical design * Use of Unigraphics or other drafting CAD tools, DxDesigner * Use of oscilloscope, multi-meter and other lab equipment * Proficient in Microsoft suite of tools * Project management skills * Military Experience Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range (Associate): $91,800 - $124,200 Summary pay range (Mid-Level): $112,200 - $151,800 Applications for this position will be accepted until May. 21, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Phantom Works is seeking an experienced Low Observable (LO) Propulsion Integration Engineer to lead LO integration of propulsion systems for advanced stealth aircraft programs. The ideal candidate will possess deep technical expertise in propulsion integration, LO design principles, and systems engineering, and will work across multidisciplinary teams to ensure propulsion system performance while maintaining stringent signature, thermal, and structural requirements. Position Responsibilities: LO propulsion integration activities for advanced platforms across concept, design, test, and qualification phases Develop and validate propulsion system LO architectures that meet performance, LO signature, and thermal management requirements Conduct trade studies, signature modeling, and sensitivity analyses for inlet, nozzle, and exhaust treatments Interface with aerodynamicists, structures, materials, thermal management, and signature engineering teams to ensure cohesive design solutions Define requirements, perform risk assessments, and establish verification/validation plans for propulsion integration items Support hardware design reviews (PDR/CDR), test planning, and ground/flight test execution to verify LO and propulsion performance Mentor junior engineers and provide technical leadership within the LO discipline Produce and review technical documentation, specifications, and interface control documents (ICDs) Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 5+ years of related work experience and a bachelor’s degree or an equivalent combination of related work experience and technical education Demonstrated experience with propulsion integration on low-observable or stealth aircraft programs Strong understanding of LO fundamentals: radar cross-section (RCS) control, IR signature management, and materials/coatings impacts Hands-on experience with inlet/nozzle design, exhaust suppression/infrared reduction techniques, and internal/external flow path management Proficiency with LO propulsion/airframe integration analyses and tools (e.g., CEM, signature modeling, thermal analysis) Experience creating technical specifications, interface requirements, and verification plans Preferred Qualifications (Desired Skills and Experience): Advanced degree (MS/PhD) in relevant field Experience with multidisciplinary design optimization (MDO) and integrated signatures analysis tools Familiarity with materials for LO applications and manufacturing/assembly constraints Propulsion integration and systems engineering LO signature control (RCS and IR) Signature modeling/data reduction software experience Test planning and flight test support Requirements development and ICD creation Special Access experience Excellent written and verbal communication skills; ability to work collaboratively across teams Strong problem-solving and analytical mindset Leadership and mentorship capabilities Attention to detail and commitment to engineering rigor Proactive risk identification and mitigation Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Signing Bonus: Potential signing bonus for eligible/qualified external candidates Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $112,200-$151,800 Applications for this position will be accepted until Jun. 09, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Troubleshoots complex electrical-mechanical systems in multi-disciplinary integration environments.

At Boeing, we innovate and collaborate to make the world a better place.We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.Boeing is seeking an experienced and dedicated Software Certification Engi

At Boeing, we innovate and collaborate to make the world a better place.We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.The Boeing Company is currently seeking.Open Architecture Systems Integrat

At Boeing, we innovate and collaborate to make the world a better place.We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.Boeing Defense Space & Security (BDS).F-15 Program Senior Radar Engine

At Boeing, we innovate and collaborate to make the world a better place.We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.Louis is building the future creating innovative solutions that will defin

At Boeing, we innovate and collaborate to make the world a better place.We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.Machine Design Mechanical Engineer.In this role, you will join a team of m

Our teams are currently hiring for a broad range of experience levels including.

Upon successful design of an architecture that meets all system requirements, the architect will lead the engineering team in its implementation and maintenance of that design through the development, lab test and flight test phases of the development cycle. Leads activities to develop, document and

At Boeing, we innovate and collaborate to make the world a better place.We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.Boeing Defense, Space & Security (BDS) is seeking a.Flying Test Bed (F

At Boeing, we innovate and collaborate to make the world a better place.We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.Boeing Defense, Space & Security.Space Analysis and Experimentation Te

Our teams are currently hiring for a broad range of experienced Systems Engineering disciplines including Experienced and Lead Levels.

At Boeing, we innovate and collaborate to make the world a better place.We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.Boeing Test & Evaluation (BT&E) is seeking a.Mid-Level Mechanical