Cnc machining jobs in Houston, Texas - Page 3Create job alerts

Job Description JOB SUMMARY The CNC Lathe Machinist 2nd Shift will perform a variety of machining practices involved with turning, boring, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure compliance with specifications and quality requirements. PRIMARY ROLE RESPONSIBILITIES • Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting., • Ability and willingness to work around and use large propane / acetylene., • Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand)., • Advanced oral and written communication., • Advanced math skills to calculate tolerances and dimensions., • Must be able to read and understand Blueprints and G-Code., • Must be familiar with basic machining practices involved in turning, milling, drilling, threading operations., • Must be competent reading drawings and following instructions necessary to produce usable and saleable parts., • Must be proficient with the use of, the care of, and the calibration of all types of measuring devices (i.e., micrometers (OD and ID), dial calipers, dial indicators, etc.)., • Must possess and provide basic tools required for the execution of the position of machinist. The above list of activities is not all inclusive but a general representation of the requirements of an RMS CNC Lathe Machinist 2nd Shift. This list is subject to change based on the needs of the company. REQUIRED EXPERIENCE AND QUALIFICATIONS • 5 years or more of CNC Lathe Machinist experience required., • OMEGA experience, • Proficient in running horizontal lathes, milling machines, VTL, and Bullard., • Capable of reading drawings and proper use of calibrated measuring tools., • Read drawings and use of micrometers., • This position will be based full-time in our RMS Pearland Works facility located in Pearland, TX., • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends, may be required based on project needs., • Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance., • Must be able to use hands for assembly and tool usage., • While performing the duties of this position the employee will be required to stand, sit, bend and walk for significant portions of the shift, • Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Able to understand, read, write, and speak English., • Must possess a valid driver’s license., • Able to pass a pre-employment drug, alcohol screening and background check., • Authorized to work in the United States. While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles. WHAT WE OFFER • Competitive Pay - Our target salary range for this role is between $30-$40 hourly. The final offer will be determined based upon the candidate's professional background, specialized certifications, and years of relevant experience., • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world’s recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech’s family of companies touches 90% of the world’s fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing — we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. • Perform full setups on CNC mills and/or lathes from print or model — including indicating vises, fixtures, and part zeros., • Interpret complex blueprints, GD&T, and 3D models to execute machining strategies., • Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency., • Troubleshoot issues related to tooling, setup, and part accuracy independently., • Ensure in-process inspection and first article inspection compliance., • Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: • 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts., • Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets., • Strong understanding of machine offsets, tool presetting, and basic G/M code., • Experience with multi-axis machining or live tooling., • Strong understanding of machining processes and techniques., • Proficient in reading and interpreting blueprints and technical drawings., • Familiar with the use of precision measuring instruments like micrometers and calipers., • Solid understanding of lean manufacturing Benefits and Compensation • Two medical plans (PPO & HSA), dental, and vision insurance, • Paid time off, Vacation, and eight Holidays, • Employee assistance program (EAP), • 401k, • Profit sharing, • Free Life, • Free AD&D, • Free Disability insurance (Shot and Long-Term Disability), • Tuition Assistance, • Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

Job DescriptionPrecision CNC Production Technician Based in: Houston, TX 77041 Is This You? • Do you enjoy dialing in a setup until the first article is spot-on?, • Can you read complex blueprints and translate them into reliable machine moves?, • Do you thrive in a team that balances speed with uncompromising quality?What You’ll Handle, • Configure and operate CNC equipment to produce components exactly to specification., • Interpret work orders, technical drawings, and prints to plan each job effectively., • Track machine performance in real time—adjust feeds, speeds, and tooling to maintain quality and efficiency., • Perform routine maintenance and basic troubleshooting to minimize downtime., • Partner with peers and leads to streamline production processes and reduce waste., • Uphold safety standards and maintain an orderly, well-labeled work area., • Document part counts, in-process checks, and any nonconformances for management review.What You’ll Need to Succeed, • High school diploma or equivalent; machining coursework or certification preferred., • Previous success as a CNC machinist or in a similar manufacturing position., • Proficiency in reading blueprints and technical documentation., • Working knowledge of CNC programming and machine operations., • Skilled with micrometers, calipers, gauges, and other precision tools., • Strong attention to detail and an analytical, problem-solving approach., • Ability to work independently while contributing to a team environment., • Effective communication and a can-do attitude.Skills Snapshot, • CNC programming, • Setup & changeover, • Precision measurement & hand metrology

Job DescriptionDescription: Position Purpose: To support our customers and Texas Injection Molding by helping to troubleshoot, diagnose and make repairs to injection molds. Aid in the mold design and building of new injection molds, fixtures and other tooling related items. Job Responsibilities: • Perform preventive maintenance and repairs on complex injection molding tools, ensuring optimal functionality and production uptime., • Identify and troubleshoot mold issues, promptly implementing solutions to minimize production disruptions., • Maintain accurate documentation of all mold maintenance and repair activities, including dates, procedures used, and materials consumed., • Train and mentor junior mold makers, fostering a collaborative and supportive work environment., • Must be organized with strong attention to detail and accuracy; working with tolerances of +/- .0005”, • Operational knowledge of tool room equipment including, but not limited to manual mills, lathes, surface grinders, CNC and EDM machines., • Start-Finish of new tooling as well as repairs and modifications of existing tooling, • Be efficient and skilled in operating manual tool room machinery such as surface grinders, mills, lathes, tool grinders., • Trouble shoot and repair hot runner systems, • Collection of data and use of data analysis to make fact based decisions, • Commitment to company values Requirements: Qualifications: Education: • Have a minimum of 5 years’ experience as a mold maker. (A machinist does not qualify as a mold maker), • Plastics/Molding experience, • Experience in the tool and die industry, preferably with precise, high-quality, injection molds., • Experience with CNC machining and programming, • Qualified as a Journeyman Mold Maker., • Have experience with fitting and benching of molds. Knowledge/Skills and Abilities: • Strong math skills, • Must be able to stand for long hours (8-10 hours daily), • Must be able to lift up to 50 lbs, • Shows good judgment, • Proficient in the ability to read and interpret engineering drawings and/or CAD files., • Ability to work independently and prioritize multiple tasks effectively, • Strong understanding of mold design principles, engineering tolerances, and material properties, • Excellent problem-solving and analytical skills, • Strong attention to detail and a commitment to safety., • Strong communication and interpersonal skills, able to collaborate effectively with diverse teams, • Excellent attendance is mandatory with ability to work up to 20 hours/week overtime, • Be a self-starter, be motivated, and able to work in a team environment, • A positive can-do attitude with willingness to learn, • Have working knowledge of mold construction., • Must have your own tools., • Must have neat and orderly work habits.

Job Description Manufacturing company in north Houston is seeking CNC Lathe and Mill Operators. We are seeking skilled and detail-oriented CNC Machinist to join our Team. The ideal candidate will have experience operating CNC Lathes or Mills to produce quality high-quality components in accordance with Engineering Drawings and Specifications. Responsibilities: • Ability to Setup and Operate CNC Lathe or Mill, • Read and Interpret Drawings, • Inspect finished parts to ensure conformance to specification using precision measuring tools, • Experience with G-Code and CNC programming A+, • Experience with Haas Lathes or Mills, • Experience machining Aluminum, Stainless Steel, Beryllium Copper, MP35N, etc., • Experience machining close tolerance parts +/- .001 Benefits: • Full time position, • Medical and Vision Insurance available, • $20-$29hr (Pay based on experience) Posted 5/6/25

Job DescriptionCNC MachinistPay $20-$25 CNC Machinist SummaryWe are seeking a CNC Machinist to join our production team. In this hands-on role, you will be responsible for setting up, operating, and monitoring CNC lathes to produce precision plastic parts that meet tight tolerances and high-quality standards. You will interpret blueprints, set machine parameters, load programs, and perform measurements to ensure parts meet specifications. CNC Machinist Responsibilities • Operate and monitor CNC lathes to machine precision parts according to work orders and blueprints, • Load raw materials, run production parts, and unload finished components, • Read and interpret blueprints, work instructions, and setup sheets to determine part requirements, • Load CNC programs and set tools, offsets, speeds, and feeds as directed, • Select, measure, install, and secure tools and attachments with minimal supervision, • Independently verify dimensions using calipers, micrometers, gauges, and other precision instruments, • Edit and adjust CNC programs or controls to correct minor errors or optimize performance, • Maintain machines, replace worn tools, and perform basic preventive maintenance, • Complete required production documentation and in-process inspection checks, • Maintain a clean, organized work area in compliance with safety and PPE requirements, • Communicate promptly with supervisors regarding machine or quality issues, • Assist with material handling, tooling changes, and other production support tasks as neededCNC Machinist Qualifications, • High school diploma or equivalent, • 5+ years of CNC lathe machining experience, preferably working with plastics, • Proficiency in reading and interpreting blueprints, GD&T, and 3D CAD models, • Skilled in the use of calipers, micrometers, and precision gauges, • Experience with FANUC-controlled CNC machines and G-code programming, • Hands-on machining and setup experience, including prove-outs and troubleshooting, • Demonstrated ability to hold tight tolerances and meet SAE aerospace standards, • Experience machining materials such as PEEK and Teflon, • Additional machining experience with:, • Stainless steels (300 Series, Nitronic 60), • PH stainless steels (15-5, 17-4), • Aluminum bronze, • MP35N and Inconel

Job Title: Maintenance Technician (USA_Technician II) Location: Houston, TX Pay: 12+ Month Contract 30/hr, W 2 Shift: • Monday – Friday (overtime based on production and PM needs) 1st shift: 6am-2:30pm| 2nd Shift: 2pm-11pm| 3rd shift: 11pm - 6am (Will need to be able to work all shifts as rotati

Graham Packaging Company - - Responsibilities: Install and maintain production machines and the plant facility's equipment; Perform preventive and reactive maintenance on production equipment and building; Diagnose problems, replace or repair parts, test and make adjustments; Provide emergency/unsc

Lansing Building Products - - Responsibilities: Greet customers, pick tickets, and load/unload customer and company trucks; Utilize handheld RF scanners to move, track, and manage products through our Warehouse Management System (TWL); Verify accuracy of orders picked and shipments received; Lift a

Eureka Multifamily Group - JobID: 200-299630-418891 [Field Technician / Maintenance Mechanic] As an Assistant Maintenance Technician at Eureka Multifamily Group, you'll: Make and/or assist with general appliance repairs, carpet repairs and minor A/C and electrical repairs; Perform and/or assist with

Universal Health Services - - Responsibilities: Perform a variety of building maintenance tasks including painting, carpentry, plumbing, electrical, HVAC; Test and inspections of physical plant equipment; Preventive maintenance; Janitorial duties with minimal supervision; Shift: Monday through Frid

Fiesta Mart - - Responsibilities: Schedule maintenance activities with hourly production supervisors; Create, approve, process, track and distribute work orders; Manage preventive maintenance program with Plant Manager; Identify and resolve maintenance problems associated with production process an

Enterprise - JobID: 546805 [Maintenance Mechanic] As a Maintenance Technician at Enterprise, you'll: Perform complete vehicle maintenance inspection including tires, brakes, and all fluid levels; Perform preventive maintenance (oil change, etc) service according to manufacturers specifications and g

Discovery Senior Living - - Responsibilities: Perform maintenance and housekeeping duties in and around the community grounds as assigned; Complete service requests for repair and maintenance of grounds, buildings, apartment homes, equipment and vehicles; Fix wall and/or floor coverings and repair

PrideStaff - - Responsibilities: Monitor and repair the Temper Line and Plasma/Oxy-Fuel Table electronics, electrical and mechanical equipment to ensure that efficiency and minimal down time of the line is maintained.Leads and/or performs general maintenance on plant equipment (lubrication, monitor

Golden Nugget - - Responsibilities: Assist in facilities and maintenance operations to ensure guest experience remains seamless.

Budweiser - - Responsibilities: Maintain and troubleshoot brewing equipment to ensure maximum operational efficiency.

Valmont Industries - 6123 Cunningham Rd - Responsibilities: Assist with preventive maintenance and repairs on plant equipment; Perform electrical, electronic and mechanical work under supervision; Learn basic metal fabrication using welding, cutting and brazing; Record labor and materials used on re

The ODP Corporation - 6225 West by Northwest Boulevard - Responsibilities: Perform one or more distribution-related functions across various tasks such as checking, picking, packing, replenishment, bin/bulk order fill, bin/bulk stocking, shipping, receiving/returns, sorting, or loading; Operate a pa

Mohawk Industries - - Responsibilities: Wait on customers and prepare sales slips; Produces daily sales reports; Performs various warehouse duties such as pulling/assembling customer orders and inventory stock checks; Performs receiving duties and operating forklift equipment; Maintains a clean and

The Geo Group - - Responsibilities: Operate equipment and machinery for preventive, corrective, and emergency maintenance.Survey assigned jobs and ensure that sufficient and proper materials and tools are on hand.Direct and inspect the work of detainee maintenance staff, providing technical assista

Fastenal - Sales [Material Handler / Freight Handler / Picker] As a Warehouse Associate at Fastenal, you'll: Perform receiving, packaging, inventory, picking, sorting and shipping out of the LIFT facility; Pull orders, package product, sort and load trucks; Receive, move, handle and stock product; O

Reliance Inc - - Responsibilities: Perform inspections and maintenance on company equipment and property; Support and contribute to continuous improvement initiatives and strive to improve safety, procedures, quality, and efficiency in all areas of responsibility; General knowledge of diesel engine

KENCO - - Responsibilities: Pick orders for shipment; Pack orders for shipments by parcel, LTL, and TL carriers; Record product, packaging, and order information on specified forms and records; Affix proper shipping and tracking labels to boxes and pallets; Execute and document quality inspections

Cintas Corporation - - Responsibilities: Drive company trucks to unload soiled products and load clean uniforms, floor mats, and customer products onto trucks; Maintain cleanliness of work area and meet/exceed standards for quantity/quality; Adhere to attendance policy and safety guidelines; Work i

The ODP Corporation - - Responsibilities: Perform one or more distribution-related functions that allow, as the business requires, assignment across various functions such as checking, picking, packing, replenishment, bin/bulk order fill, bin/bulk stocking, shipping, receiving/returns, sorting, or

Cornerstone Building Brands - 14031 West Hardy Road - Responsibilities: Installs and repairs various electrical equipment, including generators, transformers, switchboards, controllers, circuit breakers, motors, heating units and conduit systems.Diagnoses and corrects trouble in the electrical syste

Bellfort Village Drive - Responsibilities: Load and unload warehouse items; Select and palletize goods; Audit and repack as needed; Sort and clean up work area; Follow duties assigned by site leadership.

NOV - 10222 Sheldon Road - Responsibilities: Conduct test and repair of inspection equipment; maintain and service inspection facilities; Work with Tuboscope Engineering on training to repair new units as well as current inspection inventory; Repair and troubleshoot electronic, electrical and/or mec

Home Depot - - Responsibilities: Oversees, maintains, and repairs building support systems in a warehouse environment; Performs maintenance related functions in support of warehouse operations; Contributes to operational efficiency and safety through proactive upkeep and repair of equipment and fac

DH Pace - - Responsibilities: Receiving and off-loading materials, verifying counts to purchase orders, and checking shipments for damage; Ensuring that all stock is properly stored; Staging materials for installation, shipment, or customer pick up; Utilizing company specific software, field device

Consolidated Electrical Distributors - - Responsibilities: Take walk-in customer orders in person or over the phone; Build familiarity with new and returning customers; Pick up material from vendors; Receive incoming freight; Stock material on shelves.

Avenue5 Residential - - Responsibilities: Perform repairs to electrical, plumbing, appliances, flooring, carpentry, HVAC, and grounds maintenance as directed; Carry out general carpentry tasks such as wallboard repair, countertop/cabinet replacement, finish carpentry, window/glass repair, door/lock

ABM Industries - - Responsibilities: Evaluate, repair and maintain plumbing, electrical and HVAC systems in the building; Communicate with facilities management about any work that requires outside expert assistance; Receive and respond to reports of mechanical or maintenance issues on their premis

Sligan Plastics - - Responsibilities: Perform PMs without supervision; Trouble shoot equipment; Read and understand electrical schematics, hydraulic schematics, and PLC programs; Follow GMP and housekeeping standards and safety policies; Identify and implement lean and continuous improvement action

Oshkosh Corporation - - Responsibilities: Perform troubleshooting, repairs, and preventive maintenance on facility systems and controls; Accurately document maintenance activities in the CMMS; Execute reactive, preventive, predictive, and corrective maintenance, including emergency response; Prompt

NOV - 18660 East Hardy Road - Responsibilities: Maintain and repair Zap-Lok equipment in shop and field operations to ensure readiness.

Cintas Corporation - - Responsibilities: Operate and upkeep the facility wastewater system in accordance with local/national regulations; Mix chemical amounts required to wash uniforms and ancillary products; Maintain daily accuracy and productivity for inventory control; Perform housekeeping and a

Cornerstone Building Brands - 14031 West Hardy Road - Responsibilities: Safely troubleshoot, change, install and commission all components of instrument control and electrical systems; Troubleshoot, analyze and repair components of these systems: motors, MCCs, VFDs, transformers, switch gears, light

Aerotek - - Responsibilities: Assist with shipping and receiving processes, including unloading trucks with a forklift or crane and checking in merchandise.Match purchase orders to sales orders and distribute them to sales associates for processing.Stock materials accurately in both physical and el

FleetPride - - Responsibilities: Provide customer service through delivery and/or pick-up of parts and other products.Unload products from shipping vehicles and store at the appropriate storage area in the warehouse.Load materials into vehicle and install bracing or padding to prevent shifting or d

Responsibilities: Safely load, unload, and move large and small furniture orders and inventory; Utilize scanners, handheld devices, and warehouse software to track inventory and order locations; Perform quality control tasks including inspecting, assembling (deluxing), repackaging, labeling, and sor

Home Depot - - Responsibilities: Load and unload trucks; Move material within the facility; Operate forklifts or other machinery; Sort, staging, and transporting products; Use hand trucks, forklifts, or motorized conveyors.

PrideStaff - - Responsibilities: Load and unload items, including rocks weighing 30-45 lbs; Pick and pack customer orders; General cleaning and maintenance of workspace; Handle multiple tasks as assigned, including inventory organization; Assist with customer pickups.

Oshkosh Corporation - - Responsibilities: Troubleshoot, repair, and perform preventive maintenance on airport facility systems and controls; Document maintenance activities in CMMS; Perform reactive, preventive, predictive, and corrective maintenance; Communicate critical updates to the Site Manage

Cintas Corporation - JobID: 1367007200 [Material Handler / Freight Handler] As a Warehouse Associate at Cintas, you'll: Assemble uniform garments according to each individual customer employee in order to avoid mixed bundles before products are loaded onto company trucks; Count garments and record t

Golden Nugget - - Responsibilities: Respond promptly and professionally to maintenance requests; Complete assigned tasks, projects or programs, as instructed by the department's management and ensure completion competently within a given time; Ensure all logs, record sheets, day to day events are c

Budweiser - - Responsibilities: Maintain machinery, meeting maintenance requirements for 480-volt, 3 phase systems, and minimizing downtime will be necessary; Support, troubleshoot, improve, and maintain high-speed production and packaging machinery; Utilize SAP to accurately and thoroughly detail