Computer hardware jobs in Austin, Texas - Page 2Create job alerts

Job Description The Fleet Support Engineer on the Vehicle Development team will be actively engaged in the operational uptime of our fleet. The ideal candidate will be a technical expert, adept at collaborating with cross-functional teams, meticulously documenting troubleshooting processes, and providing real-time support for daily operations. Shift: Sat-Wed 8am-6pm local time Responsibilities: • Serve as the primary point of contact for real-time escalations for sensor-related fleet issues., • Conduct in-depth root cause analysis through comprehensive log review to identify and resolve fleet issues., • Develop, update, and maintain a comprehensive troubleshooting guide for technicians, incorporating newly diagnosed faults and their resolutions., • Perform hardware bring-up and validation procedures for new sensor components (LiDAR, radar, cameras, etc.)., • Design and implement diagnostic procedures to streamline future troubleshooting processes, with a focus on sensor calibration and data integrity., • Historical review of vehicle/fleet data, including sensor data, identifying trends and issues., • Collaborate with engineering design teams to enhance tooling and improve issue detection capabilities., • Develop and implement effective countermeasures across the fleet to prevent recurring issues., • Define and capture essential data points to validate issue resolution and measure the effectiveness of implemented solutions., • Engage in cross-functional collaboration to drive continuous improvement in vehicle performance and reliability., • Availability for overtime as needed, with advanced notice provided., • Willingness to travel occasionally within the U.S. to support various operational locations. Requirements Qualifications: • Minimum 4-6 years of relevant experience in transportation, aerospace, or autonomous vehicles, with a specific focus on perception systems and sensors., • Bachelor’s degree in Electrical Engineering or Computer Engineering., • Experience with low/high voltage circuits, Unified Diagnostic Services (UDS), and how to safely troubleshoot., • Understanding of hardware and software systems architecture, communications to support in an operations setting., • Embraces a holistic problem-solving approach to identifying issues with high-level vehicle functions and drive specific resolution into single components., • Self-starter, ability to build relationships across the company., • Ability to comprehend schematics, electrical diagrams, connector end views/pinout., • Pass a background check Preferred Qualifications: • Experience with electric vehicle technology., • Experience with remotely supporting vehicle troubleshooting., • Knowledge of vehicle systems and diagnostics tools., • Experience with Linux & Python-based programming systems for fleet-level data processing., • Experience with software that interfaces with hardware., • Familiarity with networking, TCP, and socket programming. Bonus Qualifications • Knowledge of automotive functional safety (ISO26262) standards, • Firmware / Software experience (managing/developing/testing), • Experience with chassis and/or electromechanical systems, • Health Care Plan (Medical, Dental & Vision), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Training & Development, • Retirement Plan (401k, IRA), • Free breakfast and lunch

Job DescriptionDescription: Who We Are Acumera is now Scale Computing! Scale Computing is a global leader in edge computing, hyperconverged infrastructure, and managed networking solutions. We deliver innovative, secure, and scalable technology that powers critical operations worldwide. Duties and Responsibilities Support network security systems deployed and managed by the organization for its customers Resolve customer issues while maintaining high levels of customer service Focus on quality customer service and continuous process improvement Act as the primary point for managing and resolving customer service technical support issues Provide customers with quick response times and first call problem resolutions Requirements Primary Skill Good understanding on networking protocols and and technical troubleshooting. Ethernet, Frame Relay, TCP/IP, HSRP, PPP, VRRP, ISDN, VPN. Working Knowledge: ARP, PING, IPCONFIG, ROUTE, NSLOOKUP commands. Routing protocols RIP/RIP2, OSPF, IGRP, IS-IS, EIGRP, BGP Must be able to configure, maintain, and troubleshoot IPSec VPNs. Hardware: Juniper Firewall (NS-5GT, SSG5, SSG140, SSG520, SSG-1000) Fortinet Firewalls (FG20C, FG100D, FG221B) Read, understand, and be able to correlate traffic logs or debug logs with specific issues or issue types. Experience installing, maintaining, supporting, and upgrading firewalls, preferably Juniper and/or Fortinet firewalls Qualifications 1-4 years of experience in a network engineer or similar technical role. Strong communication and interpersonal skills. Ability to follow processes and procedures accurately. Customer-focused with a positive attitude. Quick learner and adaptable to new technologies. Education Bachelor's degree in Computer Science, Information Technology, Network Engineering, or a related field. Certifications such as Cisco Certified Network Associate (CCNA), CompTIA Network+, or equivalent are preferred. Benefits Group medical insurance. Casual dress code. Hybrid work schedule Paid company holidays. Cab Facilities. Fully stocked snacks at office. Vibrant and Inclusive Workplace Atmosphere. Flexible work environment and an opportunity to grow as we grow. Scale Computing is an equal opportunity employer. The final candidates will be subject to a pre-employment background check. Requirements:

Job DescriptionTop Job Located in Austin, TX Salary: Competitive comp & benefits! **Must be authorized to work in the US without sponsorship now or in the future. Looking for a career with a great Company? One of the Bay Area's (Fremont) well-established, privately held, and rapidly growing companies is seeking an experienced Embedded Software Engineer. What You Get to Do! This position is responsible for applying knowledge of engineering principles to design, develop, and test all aspects of electrical components and systems. Will use computer-assisted engineering design software and equipment to perform assignments. Applies principles and techniques of electrical engineering to accomplish goals. May be involved with activities of fabrication, operation, application, installation, and repair of electrical or electromechanical products and systems. Relies on experience and judgment to plan and accomplish goals. • Design, develop, and test high-quality embedded software., • Board bring-up with initial test firmware to test all circuits., • Design and develop around MCUs and ARM microcontrollers/processors in a Linux environment., • Conducts fabrication and testing of prototype systems, and documents design modifications as required., • Collaborate with multi-disciplinary engineering and QA teams to design and develop new firmware and software architectures., • Uses engineering methodology and procedures to apply principles to design and development projects per the company SOP. What You Will Bring… • 5+ years of development experience with Embedded Linux: kernel space and user space, • B.S. in Computer Science or Electrical/Computer Engineering and 2+ years of experience in a related field; or equivalent., • Experience with JavaScript/Typescript in a full-stack web development framework (i.e., MEAN stack), • Strong knowledge of C/C++ in embedded applications, • Strong understanding of computer networking technologies; TCP/IP, web sockets, and security schemes (SSL/TLS)., • Experience with WiFi and Bluetooth for IoT applications, • Experience in a position of lead developer on a firmware/software project that has been tested and approved for production release., • Experience using version control tools (e.g., Git) and bug tracking systems., • Outstanding problem-solving resolution and attention to detail, willing to lead by example., • Strong verbal and written communication skills, • Outstanding work ethic, organizational, and multi-tasking skills, • Desire to take initiative and work well both in groups and independently., • Experience with multi-threaded software design and RTOS principles, • Experience with both analog and digital sensors, • Experience with closed-loop control systems (e.g., PID), • Experience with Microchip MCU (16-bit) and ARM (32-bit) microcontrollers, • Ability to read, understand, and modify board schematics and system diagrams., • Proficient with hardware debugging using multimeters, oscilloscopes, and logic analyzers. To Apply: For confidential consideration, please submit your resume to #srgjobs Express Office: Bend 296 Southwest Columbia Street Suite B Bend, OR 97702

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job Overview We are seeking a Field Support Representative to join our team, specializing in providing on-site technical support and assistance to our DoD partners and customers. This role requires frequent travel to partner and customer locations.Responsibilities • On-Site Technical Support: Provide on-site technical support and assistance to partners and customers during product integration, installation, commissioning, and ongoing operations. Troubleshoot and resolve complex technical issues related to our autonomous surface vessels, systems, and software, • System Integration: Collaborate with partners and customers to integrate our autonomous surface vessels into their existing systems and infrastructure. Ensure seamless interoperability and compatibility between our products and their operational environment. Support system-level testing and validation activities, • Customer Training and Documentation: Conduct training sessions and workshops to educate partners and customers on the operation, maintenance, and troubleshooting of our products. Develop training materials, user guides, and technical documentation to facilitate knowledge transfer and best practices, • Remote Support and Troubleshooting: Provide remote technical support to partners and customers, leveraging communication tools and remote access capabilities. Diagnose and troubleshoot issues, guide users through problem resolution, and escalate complex issues to the appropriate teams for further investigation, • Field Testing and Validation: Participate in field testing and validation activities at partner and customer locations. Collect data, assess performance, and provide feedback to the engineering and design teams. Collaborate with cross-functional teams to address any identified issues and implement necessary improvements, • Customer Relationship Management: Build strong relationships with partners and customers by delivering exceptional technical support and fostering effective communication. Understand their needs, gather feedback, and advocate for their requirements internally. Act as a technical liaison between partners/customers and Saronic internal teams, • Continuous Improvement: Identify opportunities for process improvements and product enhancements based on customer feedback and on-site experiences. Collaborate with internal teams to implement changes and contribute to the ongoing improvement of our products and services, • Travel Management: Coordinate travel logistics and scheduling for on-site visits. Ensure timely and efficient travel arrangements, including transportation, accommodation, and necessary equipmentQualifications, • Bachelor's degree in Electrical Engineering, Mechanical Engineering, Computer Science, or a related field. Advanced degree preferred, • Minimum of 3 years of experience in a field support or customer-facing technical role, preferably with complex hardware or software systems, • Strong technical knowledge of autonomous systems, robotics, or marine vessels, including their integration, operation, and troubleshooting, • Excellent problem-solving and analytical skills, with a track record of diagnosing and resolving complex technical issues in real-world environments, • Strong communication and interpersonal skills, with the ability to effectively communicate technical concepts to both technical and non-technical stakeholders, • Customer-oriented mindset with a passion for delivering exceptional support and building long-term relationships with partners and customers, • Willingness to travel frequently to partner and customer locations, both domestically and internationally, as required, • Familiarity with remote support tools and troubleshooting methodologies, • Valid driver's license and willingness to operate company vehicles or rental cars as needed, • This role may require flexibility to work during weekends or outside standard business hours to meet project deadlines, respond to urgent needs, or support essential business operations. Benefits, • Medical Insurance: Comprehensive health insurance plans covering a range of services, • Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care, • Saronic pays 100% of the premium for employees and 80% for dependents, • Time Off: Generous PTO and Holidays, • Parental Leave: Paid maternity and paternity leave to support new parents, • Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses, • Retirement Plan: 401(k) plan, • Stock Options: Equity options to give employees a stake in the company’s success, • Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage

Job DescriptionSenior Help Desk TechnicianEmployment Type: Full Time Department: Help Desk CGS seeks a Senior Help Desk Technician to fulfill the requirements of Level 1 & 2 Help Desk (PC Assist) support services to end users consisting of senior management, attorneys, support staff, contractors, and associated systems for the Executive Office for the United States Attorneys (EOUSA). CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Backup/Restoration admin/support- File Server support- User Account/Mailbox administration- Software/Hardware installation- Handheld device installation/troubleshooting/support- Remote User setup/support/troubleshooting- End-user training- Creation of procedural documentation- Creation of spreadsheets/databases for tracking purposes- Record and update required information for all IT-related tickets utilizing ITIL- Creation of Incident work-log entries- Accurately answer user support questions of software and hardware in the EOUSA office environment- Maintain Account Management forms for new and departed users per Government policy and procedures- Produce proactive reports, trending analysis, service level reporting, process consultation and application of ITIL best practices- Conduct and maintain accountable IT inventories such as laptops, desktops, tablet PCs, printers, MFPs’ accessories, IT supplies, etc. using spreadsheets- Provide desk-side training for new employees and staff, consisting of basic instructions on accessing and using standard desktop applications (e.g. e-Mail, Microsoft Office, etc) and how to access available research database applications- Submit weekly status reports and monthly surveys- Set up and support conference and training rooms for presentations including, audio systems, video systems, A/V distribution systems, computer hardware and software, control programming, microphones, amplifiers, encrypted wireless microphone systems, digital recording and computer/video interface- Utilize online meeting applications such as Adobe Connect to support hardware set-up of microphones and webcams, set-up operations for audio mixing boards and facilitate/monitor/record online meeting sessions Qualifications:- One year or more Adobe Connect or related online meeting center set-up experience. Non-Required, advantageous additional knowledge, experience, or competency considered favorable assets shall include: - ITIL Foundations certification - Change Management experience - Active DOD clearance of Level 6 Public Trust or above Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package:- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description ABOUT US: Travis Association for the Blind/Austin Lighthouse (TAB) a non-profit organization, was founded in 1934 by Dr. Henry L. Hilgartner and other civic-minded citizens of Austin to provide a setting where blind men and women could come to learn skills and create products that were sold door to door. Today, Travis Association for the Blind stays true to the mission established in 1934 by providing opportunities for economic and personal independence for people who are blind, visually impaired, or deaf blind by creating, sustaining, and improving employment. We continue to grow and expand the services we provide to blind Texans. Our Core Values guide us in everything we do: LIGHT: Leadership, Integrity, Growth & Innovation, Heart, and Teamwork. TAB offers a variety of benefits to include: 403(b) retirement plan; health insurance; dental insurance; vision insurance; employee assistance program; life insurance; paid time off; paid holidays; employee appreciation events; and more. Job Summary The Applications Support Technician provides frontline support for the organization's enterprise applications and end-user technology. This role assists employees with troubleshooting application issues, supporting accessibility technologies, and ensuring business systems remain usable for daily operations. This is an on-site, customer-facing role that works directly with staff across the organization to resolve application issues, answer user questions, and escalate complex problems to senior IT staff when necessary. The position also provides occasional hands-on support for desktop computers, laptops, printers, and workplace technology, and assists employees with accessibility software and devices. Responsibilities Key Responsibilities Application Support · Provide Tier 1 support for enterprise applications including ERP, CRM, HRIS, and other internal systems. · Respond to user questions, troubleshoot basic application issues, and assist with system navigation or functionality. · Escalate complex issues to senior IT staff or application administrators as needed. End User Support · Serve as a customer-facing technical resource supporting internal users with business applications and workplace technology. · Assist employees with resolving common software and technology issues that impact daily operations. Accessibility Technology Support · Assist employees with accessibility technologies used throughout the organization, including screen readers, adaptive software, and assistive input devices. · Work with IT staff to troubleshoot accessibility-related issues when they arise. Hardware and Device Support · Provide occasional hands-on support for desktops, laptops, printers, and other workplace technology. · Assist with basic troubleshooting, setup, and replacement of end-user equipment when needed. User Access Assistance · Assist with user access requests and basic account troubleshooting within business applications. · Ensure requests follow established security and approval processes. Documentation · Document issues, resolutions, and troubleshooting steps in the IT service management system. · Assist with maintaining basic user documentation and internal support materials. Training and User Assistance · Provide basic guidance and assistance to users learning enterprise applications. · Support onboarding new employees by helping them access and use required systems. Vendor and System Support · Assist with gathering information for vendor support requests when needed. · Help collect error logs, screenshots, or system details required for troubleshooting. • Complies with and assist other employees understand and comply with TAB's policies and procedures., • Behaves in accordance with the key behaviors aligned with TAB's Core Values of Leadership, Integrity, Growth & Innovation, Heart and Teamwork (LIGHT)., • Other duties as assigned The above description reflects the details considered necessary to describe the principal functions of the job and should not be construed as a detailed description of all the work requirements that may be performed in the job. Knowledge, Skills and Abilities • Knowledge of enterprise application administration including ERP, CRM, HRIS, and related business platforms, • Knowledge of common desktop software environments, • Basic understanding of user access management concepts, • Troubleshooting application and software issues, • Supporting end users with varying levels of technical familiarity, • Documenting issues and resolutions clearly in a ticketing system, • Skill in developing and maintaining technical documentation including system configurations, integration maps, and user guides, • Skill in delivering end-user application training to diverse audiences, • Ability to manage multiple application administration priorities concurrently and communicate status effectively to the IT Systems Manager, • Ability to collaborate with business stakeholders and vendors to define requirements and deliver application solutions, • Proficiency in Microsoft Office Suite; familiarity with ITSM ticketing systems such as FreshService or comparable platforms, • Able to read, comprehend and understand information and ideas presented in writing or in alternative form, • Able to multitask, prioritize, and manage time efficiently, • Demonstrates sound work ethics, • Possesses cultural awareness and sensitivity Supervisory Responsibility • None. Regularly provides application-related guidance and training to end users and may coordinate technical tasks with other IT staff without formal supervisory authority. Communication & Contacts Required • Internal: IT Systems Manager, IT team members, department managers, and end users across all TAB functions. External: Application vendors, integration partners, and software support contacts. Decision Making/Judgment Required • Exercises independent judgment in application administration, user access management, integration troubleshooting, and change management activities in accordance with TAB's IT policies and Standard Operating Procedures. Escalates decisions involving significant system changes, security incidents, or vendor contract matters to the IT Systems Manager. Minimum Education and Experience • Bachelor's degree in computer science, Information Technology, Information Systems, or a related field; or equivalent relevant work experience, • Minimum of 3 years of experience in enterprise application administration or a related IT role, • Experience administering ERP systems (e.g., Syteline, Microsoft Dynamics, SAP, or comparable) preferred, • Experience with Salesforce CRM administration preferred, • Experience with application integration platforms or middleware (e.g., Boomi, MuleSoft, Azure Logic Apps) preferred, • ITIL Foundation certification or comparable IT service management credential preferred, • Microsoft certifications (e.g., Azure Administrator AZ-104 or M365) preferred Physical Requirements With or without reasonable accommodation, employees in this position must be able to: • Prolonged periods of working at a computer workstation, • Ability to remain in a stationary position (sit/stand) for 4-8 hours per day, • Ability to bend, stoop, and adjust position for approximately 20% of the workday, • Ability to lift/move up to 25 lbs. at times for equipment handling, • Ability to traverse TAB facilities to support application users across departments, • Ability to work in environments with varying temperatures including server rooms and warehouse areas Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This description reflects management's assignment of essential functions; it does not proscribe or restrict the tasks that may be assigned or reassigned. This job description is subject to change at any time. ADDITIONAL NOTES: • Background Check and Drug Screen required, • Internal and external applicants accepted, • Verifiable documentation of ability to work in the US Individuals who are blind or visually impaired are encouraged to apply TRAVIS ASSOCIATION FOR THE BLIND, A NON-PROFIT ORGANIZATION, IS AN EQUAL OPPORTUNITY EMPLOYER/AFFIRMATIVE ACTION EMPLOYER TAB provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability status, protected veteran status, genetics or any other characteristic protected by law. In addition to federal law requirements, TAB complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. visit: EEO is the law. To review your rights under Equal Employment Opportunity, please.pdf Job Posted by ApplicantPro

Job Description Continuum is seeking a Level 3 Vehicle Operator to join an on-demand, autonomous ride-hailing company, offering an incredible opportunity to break into the exciting world of autonomous vehicles. This role is a perfect fit for current drivers with technical experience looking to launch a career in this cutting-edge industry, as well as experienced Autonomous Vehicle Operators (AVOs) eager to further their careers with advanced responsibilities. In this position, you’ll prioritize safety, maintain vehicle readiness, perform software and hardware tests, and serve as a brand ambassador to the public. You’ll collaborate with diverse teams, including computer vision, infrastructure, sound design, vehicle engineering, and ride operations, applying your technical skills to support mission-critical tasks. This is your chance to be at the forefront of a revolutionary industry, gaining hands-on experience and shaping the future of mobility. We’re looking for disciplined, team-oriented drivers who are eager to leverage their technical know-how to advance autonomous technology. This role provides a front-row seat to the operational challenges of autonomous mobility, offering unparalleled growth potential for those entering the field or seeking to elevate their expertise. • Austin, TX – ONSITE, • 6-12 month contract As a Level 3 Vehicle Operator, you will: • Operate and support vehicle functions using your driving expertise., • Drive 4-8 hours daily with a focus on safety., • Execute basic software operation and troubleshooting tasks., • Support missions through diverse in-vehicle and out-of-vehicle technical roles., • Assist with documentation, metrics, and feedback to engineering teams., • Perform daily vehicle maintenance checks, services, and minor repairs., • Provide logistical support for vehicle and equipment movement/storage., • Ensure vehicles, equipment, and workspaces are ready and clean., • Manage paperwork related to vehicle readiness. Requirements • Proven driving experience with any level of technical troubleshooting, such as application debugging, technical support, or gaming-related problem-solving., • Ability to drive for extended periods (6 hours daily)., • Familiarity with technology, including software systems or hardware configuration, even from hobbies like gaming or DIY projects., • Excellent written and verbal communication skills., • Clean driving record and no criminal history., • Proactive, resourceful mindset., • Any technical certification, degree, or equivalent experience (e.g., IT support, modding games, or robotics) is a plus., • Military experience is a plus. Benefits • Pre-tax commuter benefits, • Employer-subsidized healthcare benefits, • Flexible Spending Account for healthcare costs, • All costs covered for short- and long-term disability and life insurance, • 401k package Commitment: This is a full-time, ongoing contract position, open to candidates local to the Austin, TX area. contract position, open to candidates local to the Austin, TX area.

Job DescriptionDescriptionThe Eagle Eye Networks SWAT Escalation team plays a critical role in advancing our products, triaging and resolving our most difficult technical issues (reducing Engineering team involvement), and improving the knowledge of our Support team members. With field Sales and Support team members around the world, SWAT Escalation Engineers will have an excellent opportunity to influence the global customer experience and grow into bigger and more impactful roles within the organization. SWAT Escalation Engineers have deep and broad technical knowledge and experience in advanced platform troubleshooting, cross-departmental communications, and a strong customer-centric philosophy. SWAT is a Positively Persistent organization that: • Works quickly to ensure incoming issues are triaged and APPROPRIATELY directed to code teams, • Computer Science or other relevant degree, • Desire to go into code developmentDemonstrated ability to:, • Excel in resolving Support Tickets in a timely manner, • Collaborate effectively with peers and other teams, • Document effectively, • Serve as a global escalation point for technical support incidents not resolved at the L1/L2 levels, • Provide technical Incident Reports to stakeholders for high and critical priority issues, • Develop use cases into high-quality solutions in your specialist area, • Take ownership and accountability for individual deliverables, • Provide guidance and leadership to L2 support to resolve cases prior to escalation., • Deep Eagle Eye Networks VMS product line knowledge, • Linux skills for examining bridge/hardware issues, • SQL/Postgres knowledge, • Python experience, • Bridge logs literacy, • 3-5 years of Technical Escalation experience, • Firewall familiarity for working with complex client networks, • Networking Knowledge (VLANS, MPLS Networks) for working with complex client networks, • Strong documentation and technical writing skills, • Ability to work independently and work collaboratively in a team environment, • Must enjoy working with leading edge technology and being an intrinsic part of a fantastic team, • Experience in APIs, • The Brivo Experience: We thrive on in-person collaboration and a "one-team" atmosphere. We embrace our international presence, leveraging diverse ideas and backgrounds to improve our culture and our products. To keep our global teams connected and inspired, we provide a premium onsite experience featuring communal meals, recurring social events, and fully stocked workspaces—ensuring you have everything you need to stay focused while building the future of security., • Total Rewards: We support our people with competitive medical, vision, and dental plans (including company-offset premiums), a 401k with company match, and an unlimited Paid Time Off (PTO) policy that empowers you to take the time you need to maintain a healthy work-life balance.Individual compensation packages are based on job-related skills, experience, qualifications, work location, training, and market conditions. In addition, Brivonians enjoy a robust benefits and perks package tailored to their work location.

Job DescriptionAbout ANS At ANS, we’re not just a consulting engineering firm—we’re a team of trailblazers shaping the future of multi-disciplinary engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We thrive on innovation, embrace a “best idea wins” culture, and value humility, ownership, and execution. If you excel in fast-moving environments and believe in the power of precision, this is the place for you. About the RoleANS is looking for an IT Support Technician! In this role, you will be instrumental in ensuring the smooth operation of our IT systems and providing technical support for our staff. Your contributions will enhance our ability to deliver high-quality engineering services across various projects.What You’ll Do • Provide support for IT-related issues via phone, email, or in-person., • Troubleshoot and resolve hardware, software, and network problems., • Document and track all support requests using a ticketing system., • Install, configure, and update operating systems and applications., • Set up and maintain desktops, laptops, printers, and other peripherals., • Support Microsoft 365 applications (Outlook, Teams, OneDrive, etc.)., • Maintain IT asset inventory and perform basic system updates., • Follow company IT policies and security best practices., • Assist users with troubleshooting Engineering specific softwareWHAT WE ARE LOOKING FOR, • Associate’s degree in IT, Computer Science, or related field (or equivalent experience or certificates)., • 3-6 years of IT support experience, • Understanding of Windows and macOS operating systems., • Experience with Microsoft 365, Active Directory, and networking concepts., • Experience with remote desktop tools and ticketing systems., • Self-motivated and self-managed, • Ability to learn IT support for Engineering specific softwareNICE TO HAVE, • PowerShell, Ansible, Terraform scripting

Job Description About Ping Identity: At Ping Identity, we believe in making digital experiences both secure and seamless for all users, without compromise. We call this digital freedom. And it's not just something we provide our customers. It's something that inspires our company. People don't come here to join a culture that's built on digital freedom. They come to cultivate it. Our intelligent, cloud identity platform lets people shop, work, bank, and interact wherever and however they want. Without friction. Without fear. While protecting digital identities is at the core of our technology, protecting individual identities is at the core of our culture. We champion every identity. One of our core values, Respect Individuality, reminds us to celebrate differences so you are empowered to bring your authentic self to work. We're headquartered in Denver, Colorado and we have offices and employees around the globe. We serve the largest, most demanding enterprises worldwide, including more than half of the Fortune 100. At Ping Identity, we're changing the way people and businesses think about cybersecurity, digital experiences, and identity and access management. As a Desktop Support Engineer, you will directly support Ping employees in Austin, TX and around the globe. You will solve problems, provide secure and reliable end-user support, and be responsible for maintaining end-user computing and office technology at our Austin, TX site in close partnership with our Systems, Security, and Facilities teams. You Will • Report to the Manager, Desktop Support, and provide Tier 1 end-user support through various channels such as phone, in-person, and our ticketing system for all IT-related questions and issues from Ping Identity employees and affiliates., • Triage and prioritize support tickets, identifying those requiring urgent attention, and perform problem analysis to recognize support call trends and areas for improvement., • Follow documented security and identity verification procedures (e.g., for password resets, MFA changes, and access requests) to protect users and systems from social engineering and other threats., • Contribute to the knowledge base by creating and updating articles that document common issues, configurations, and "how-to" guides, fostering self-service troubleshooting among employees., • Manage software licenses at the end-user level, including assignment and tracking, in coordination with application owners and Procurement to ensure compliance and efficiency., • Handle IT hardware assets, including issuance, tracking, and maintenance of computers, monitors, phones, and peripherals, ensuring accurate inventory and timely lifecycle management., • Facilitate the onboarding process for new employees by provisioning equipment, setting up logins and access, and providing orientation to the IT environment, tools, and support channels., • Manage the offboarding process for departing employees, including disabling access, following security and identity-verification procedures, and collecting assets to maintain security and inventory accuracy., • Provide hands-on support for conference room and office technology (e.g., AV/Zoom rooms, docking stations, printers) and perform various facilities-related tasks such as office moves and shipping/receiving of IT equipment., • Coordinate with vendors for warranty repairs of IT assets, ensuring timely resolution and minimal disruption to operations., • Work within our ITSM / ticketing system to help the team meet or exceed SLAs and service quality targets, and contribute to reporting and continuous improvement efforts., • Collaborate closely with Systems, Security, and Facilities teams to escalate complex issues, maintain standard configurations, and support site-level initiatives.You Have, • 2–4 years of experience in an IT support or helpdesk role, demonstrating a solid foundation in providing technical assistance to end-users., • Proficiency in supporting macOS and Windows 10/11 systems, with hands-on experience troubleshooting common issues and configurations., • Experience providing hardware support for both Apple and Windows (Dell, Microsoft, Lenovo, etc.) devices, including installation, maintenance, and basic repair or warranty coordination., • Familiarity with Jamf Pro and Microsoft client support tools, enabling efficient management and troubleshooting of endpoints., • Knowledge of Active Directory and Google Workspace (G Suite) administration, including user lifecycle tasks, group membership, and access control., • A strong awareness of security best practices in a helpdesk context, including careful identity verification, handling of sensitive requests, and adherence to documented security procedures., • AS or BS in Information Technology, Computer Science, or equivalent experience, indicating a formal education or relevant certifications in the field. In accordance with Colorado's Equal Pay for Equal Work Act (SB 19-085) the approximate compensation range for this role in Colorado is listed above. Final compensation for this role will be determined by various factors, such as knowledge, skills, and abilities. Life at Ping: We believe in and facilitate a flexible, collaborative work environment. We're growing quickly, but remain true to the innovative, can-do startup values that got us here. Most importantly, we keep hiring talented, smart, fun, and genuinely nice people because that's who we want to succeed with every day. Here are just a few of the things that make Ping special: • A company culture that empowers you to do your best work., • Employee Resource Groups that create a sense of belonging for everyone., • Regular company and team bonding events., • Competitive benefits and perks., • Generous PTO & Holiday Schedule, • Parental Leave, • Progressive Healthcare Options, • Retirement Programs, • Opportunity for Education Reimbursement We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.

Job Description Computer Vision & Machine Learning Engineer for Autonomous Anti-Drone Systems Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous venture acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. What You'll Do: * Development and optimization of computer vision algorithms for our autonomous gun turret, focusing on real-time drone detection, tracking, and classification. * Design and implement machine learning models that can operate in resource-constrained environments while maintaining high accuracy and reliability. * Collaborate closely with electrical engineers to integrate computer vision systems into the turret's hardware architecture. * Conduct extensive testing and validation of computer vision algorithms in various scenarios to ensure robustness and performance under different environmental conditions. * Contribute to the hardening of the prototype turret into a military-grade system, and assist in developing variants for different weapon systems and engagement ranges. What You'll Need: * Deep passion for machine learning, computer vision, and robotics, and have been exploring these areas since early in your career. * At least a Bachelor's degree in Computer Science, Electrical Engineering, or a related field, with a strong focus on machine learning and computer vision. * 4-7+ years of experience working on machine-learning-based computer vision, ideally in the context of robotics. * A proven track record of developing and deploying computer vision systems, ideally in real-time or safety-critical applications. * Proficient in Python, C++, and have experience with machine learning frameworks such as TensorFlow, PyTorch, or similar. * Experience with embedded systems and integrating computer vision algorithms into hardware. * Familiar with various sensors (e.g., cameras, LIDAR, RADAR) and their integration into autonomous systems. * You enjoy collaborating with other engineers to solve complex technical challenges. What We Offer: * Competitive salary * ACS Equity Package * Health, Dental, Vision Insurance * Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionOn-Call IT Field Technician – PC, Mac, Printer & Scanner Support ???? Location: Multiple U.S. Cities (Local, Onsite Support) ???? Job Type: Independent Contractor (1099) ???? Pay: $35/hour (on-site) ???? Schedule: Flexible – You accept jobs based on your availability ⚠️ Important Note This is an on-call, 1099 independent contractor role with no guaranteed hours. You’ll join our technician network and receive job opportunities based on your location and stated availability. You decide which jobs you want to accept. About Geeks on Site Geeks on Site has been delivering trusted, on-site IT and technical support to homes and businesses nationwide for over 20 years. We’re expanding our network of skilled on-call technicians to meet growing demand for in-person support — including computers, networks, printers, and more. About the Role We’re hiring field IT technicians who can confidently support a wide range of tech needs for residential and small business customers. This includes troubleshooting PCs and Macs, resolving network issues, and repairing or configuring printers/scanners — including issues like Canon MF printer network setup or G-series ink absorber error codes (e.g., 1700). You’ll be dispatched to customer sites, work independently, and complete service calls efficiently and professionally. Key Responsibilities • Diagnose and repair hardware/software issues on Windows and macOS systems, • Resolve boot errors, OS issues, and login problems, • Set up or troubleshoot Wi-Fi and wired internet connections, • Replace or upgrade hardware (HDD, RAM, cooling fans, etc.), • Configure or connect printers and scanners (Canon, HP, Brother, etc.), • Address common printer error codes (e.g., ink absorber, paper feed, connectivity), • Perform general maintenance on multifunction printers (MFPs), • Reinstall operating systems using bootable USBs or recovery media, • Install remote tools or shortcuts as requested, • Communicate clearly with customers and provide basic post-service support, • 2+ years of field IT support experience, including computer and printer work, • Familiarity with Canon, HP, and other common printer brands, • Knowledge of error code troubleshooting (e.g., Canon code 1700, boot issues, driver conflicts), • Experience with both Windows (10/11) and macOS troubleshooting, • Must have personal tools (bootable USB, screwdriver set, etc.), • Reliable vehicle and valid driver's license, • Smartphone with camera and data for documentation and communication Compensation • $35 per hour for on-site time, • Flexible scheduling — accept only the jobs that match your route and availability, • National brand recognition and continuous job offers, • Dispatch and tech support team available to assist remotely ✅ What to Expect After You Apply • ???? Intro Call – A recruiter will contact you for a quick chat, • ???? Onboarding – Complete paperwork and tax forms electronically, • ???? Background Check – Mandatory before activation, • ???? Set Your Availability – You enter your availability in our tech portal, • ???? Start Receiving Jobs – You’ll be dispatched jobs based on proximity & skills Join Our Technician Network If you're a reliable, tech-savvy field technician with hands-on printer experience and a flexible schedule, we’d love to hear from you.

Job DescriptionSenior Help Desk Technician IIEmployment Type: Full Time Department: Help Desk CGS seeks a Senior Help Desk Technician to fulfill the requirements of Level 1 & 2 Help Desk (PC Assist) support services to end users consisting of senior management, attorneys, support staff, contractors, and associated systems for the Executive Office for the United States Attorneys (EOUSA). CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Backup/Restoration admin/support- File Server support- User Account/Mailbox administration- Software/Hardware installation- Handheld device installation/troubleshooting/support- Remote User setup/support/troubleshooting- End-user training- Creation of procedural documentation- Creation of spreadsheets/databases for tracking purposes- Record and update required information for all IT-related tickets utilizing ITIL- Creation of Incident work-log entries- Accurately answer user support questions of software and hardware in the EOUSA office environment- Maintain Account Management forms for new and departed users per Government policy and procedures- Produce proactive reports, trending analysis, service level reporting, process consultation and application of ITIL best practices- Conduct and maintain accountable IT inventories such as laptops, desktops, tablet PCs, printers, MFPs’ accessories, IT supplies, etc. using spreadsheets- Provide desk-side training for new employees and staff, consisting of basic instructions on accessing and using standard desktop applications (e.g. e-Mail, Microsoft Office, etc) and how to access available research database applications- Submit weekly status reports and monthly surveys- Set up and support conference and training rooms for presentations including, audio systems, video systems, A/V distribution systems, computer hardware and software, control programming, microphones, amplifiers, encrypted wireless microphone systems, digital recording and computer/video interface- Utilize online meeting applications such as Adobe Connect to support hardware set-up of microphones and webcams, set-up operations for audio mixing boards and facilitate/monitor/record online meeting sessions Qualifications:- One year or more Adobe Connect or related online meeting center set-up experience. Non-Required, advantageous additional knowledge, experience, or competency considered favorable assets shall include: - ITIL Foundations certification - Change Management experience - Active DOD clearance of Level 6 Public Trust or above Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package:- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview We are seeking an experienced and highly accountable Production Manager to lead our manufacturing operations in Austin, TX. As we transition from R&D to high-rate production, you will be responsible for the end-to-end execution of our manufacturing schedule. You will oversee a team of technicians and planners, manage our facility’s physical throughput, and ensure that every Bullfrog unit leaving the floor meets our rigorous standards for reliability and performance. This role requires a rare blend of "boots-on-the-ground" shop leadership and sophisticated digital resource planning. What You’ll Do: * Production Execution: Drive the daily manufacturing schedule to meet aggressive delivery milestones for defense and commercial partners. * Team Leadership: Hire, train, and lead a high-performing production team. You will embody our "hire slow, fire fast" methodology—ensuring we only have the best talent on the line and maintaining a culture of extreme ownership. * ERP & Workflow Mastery: Own the digital production flow within Odoo, ensuring all manufacturing orders, work centers, and inventory movements are tracked with 100% accuracy. * Facility Optimization: Manage the throughput of our Austin production facility from sub-assembly production through turret acceptance testing. * Quality & Accountability: Implement and enforce rigorous QA/QC protocols alongside the Quality Manager. You will be responsible for identifying underperformance in the process—or the team—and correcting it immediately. * Cross-Functional Collaboration: Bridge the gap between Engineering, Supply Chain, and Production to resolve assembly bottlenecks and implement DFM (Design for Manufacturing) feedback in real-time. What You’ll Need: * Experience: 8+ years in manufacturing or production management, specifically with complex electromechanical hardware (robotics, aerospace, or automotive). * Leadership: Proven track record of managing production teams in a fast-paced, high-stakes environment. You should be comfortable making difficult personnel and operational decisions. * Systems Expertise: Deep experience with ERP systems (Odoo highly preferred) for managing BOMs, inventory, and work orders. * Technical Literacy: Ability to read technical drawings and oversee the assembly of high-tolerance robotic components. * Operational Grit: A "no-excuses" approach to meeting deadlines and solving equipment or supply chain stalls on the fly. * Education: Bachelor’s degree in Engineering, Operations Management, a related field, or equivalent years of experience Why You'll Stand Out: * Startup Scaling: You have experience taking a production floor from "hand-built prototypes" to "standardized high-volume output." * Defense Industry Knowledge: Understanding of the rigors required for hardware deployed to the tactical edge. * Lean/Six Sigma: Practical application of lean manufacturing principles without the corporate bureaucracy. What We Offer: * Competitive salary * ACS Equity Package * Health, Dental, and Vision Insurance * Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1

Job DescriptionCompany Description About KIPP Texas Public Schools KIPP Texas Public Schools is a free, public charter school network with more than 45 Pre-K - 12 schools across Austin, Dallas-Fort Worth, Houston, and San Antonio. With over 30 years in Texas, we work together with our families and communities to prepare students for college, career, and beyond! Our schools provide a high-quality, well-rounded education built on academic success and personal growth, where all students learn and thrive in a productive, safe, and joyful way! As one of the earliest charter networks in Texas—founded in Houston in 1994 and operating as KIPP Texas since 2018—we hire dynamic, collaborative, and dedicated individuals with an unyielding belief that every child will succeed. Join a Team and Family with an unwavering commitment to creating classrooms, offices, and communities rooted in academic success and joy. If you are passionate about joining a mission-driven community that wants every child to "run to school," the KIPP Texas Team and Family is for you! KIPP Public Schools is a national network of public charter schools that prepares students with the skills and confidence to create the future they want for themselves, their communities, and us all. We are a network of 278 schools with nearly 16,500 educators and 190,000 students and alumni. Job Description The Technician, IT Support Services reports to the Sr. Manager, IT Support Services for their home region. This position resides at either a school campus or the regional SSP (administrative office) building. This role is responsible for providing Tier 1 technical support and may support multiple school and administrative locations throughout their region. The technician provides desk-side support and remote assistance, ensuring seamless operation of IT systems and devices across the organization. Key areas of responsibility include School based Desktop Support, Faculty and Classroom Device Support, Asset Management, Knowledge Base Article Creation, Device Imaging, and Multifunction Printer Maintenance. Key Responsibilities Functional Accountabilities * Provide Tier 1 desktop support to teachers and staff by diagnosing, troubleshooting, and resolving issues with Windows, iOS, and Chrome OS computers & tablets. * Diagnose and support other technology devices, including printers, projectors, cellular phones, and classroom technology equipment. * Install and troubleshoot software, including client, cloud, and network-based applications. * Prepare and deploy new hardware, including imaging, configuration of desktop applications, asset tagging, and initial end-user training. * Utilize the ticketing system to receive, prioritize, and respond to support requests. * Meet department standards for ticket resolution, response time, and customer satisfaction. * Assist in improving desk-side technical support by documenting policies, procedures, and creating knowledge base articles. * Conduct asset audits and maintain inventory records. * Provide remote support to end-users. Service Delivery * Adhere to IT standards, metrics, Service Level Agreements (SLAs), Key Performance Indicators (KPIs), documentation requirements, and communication protocols. * Evaluate and interpret the requirements of key business stakeholders and end-users to develop and implement solutions. * Resolve IT-related issues, service requests, and problems within established parameters. * Provide status updates to users regarding the progress of their service requests and incidents. * Build and maintain relationships with school leaders and office staff. Qualifications Qualifications * High School Diploma or GED required. * Technical certifications such as A+, Network+, Cisco Certifications, Microsoft Certifications, ITIL, or CompTIA are preferred. * An Associate's degree in Electronics, Computer Science, or related field is a plus. Skills * Strong troubleshooting and problem-solving skills for Tier 1 technical service requests. * Excellent communication and interpersonal skills, with the ability to convey technical information clearly to non-technical stakeholders. * Ability to perform effectively in a dynamic and complex operating environment. * Strong organizational skills with the ability to manage multiple priorities and assignments. * Familiarity with desktop operating systems including Windows, Mac, and Chrome OS. * Experience with Active Directory, Google Admin Console, mobile device management platforms, and asset management systems. * Ability to produce clear written documentation and instructional materials. * Team-oriented mindset with a strong customer service approach. * Detail-oriented with a focus on meeting service expectations. * Alignment with KIPP Texas's mission and core values. Additional Information What We Bring to the Table: ● Comprehensive medical, dental, and vision plans with coverage options for employees and their families. ● Competitive vacation and flexible paid time off (PTO) policies. ● Paid family leave. ● Flexible spending account or high-yield HSA. ● Employee assistance programs. ● KIPP also offers the following employee-paid benefits: legal plans, LifeLock identity protection, life insurance and disability insurance. EEO: KIPP Texas is an Equal Opportunity Employer. KIPP Texas ensures equal employment opportunities regardless of race, creed, gender, color, national origin, religion, age, sexual orientation, or disability. Any individual needing assistance in making an application for any opening should contact the Talent Team. Federal law requires employers to provide reasonable accommodation to qualified individuals with disabilities. Please tell us if you require a reasonable accommodation to apply for a job or to perform your job duties. Examples of reasonable accommodation include making a change to the application process or work procedures, providing documents in an alternate format, using a sign language interpreter, or using specialized equipment.

BS in Electrical Engineering, Computer Engineering, or related discipline. Based in 'The Domain' neighborhood, Optiver's Austin office serves as the firm's innovation nucleus, with a strong focus on quantitative research, software and hardware engineering initiatives. Experience working with contrac

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add an Electronics Assembly Technician III to our team on 2nd shift. If you enjoy working in a startup environment and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. As an Electronics Assembly Technician at Cesium Astro, you will be a key team member in ensuring the quality and delivery of our products meets our customer's expectations. The ideal candidate will have experience in high-reliability industries such as Aerospace, Automotive, or Medical devices. You must be responsive, flexible, and able to succeed in a fast-paced environment and be capable and motivated to build, repair and maintain an SMT circuit card and electronics final assemblies. As we are a start-up the expectation is that we all wear many hats, and at times you may be asked to assist in additional duties such as performing cycle counts of inventory, assisting in shipping and receiving functions, or other tasks. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • A high school diploma or GED., • 4 years of experience in electronic assembly operations such as SMT, AOI, Prepping Components, X-Ray, De-Panel, and Soldering., • Experience in interpreting schematics, drawings, diagrams, and other visual aides for assembly., • Ability to work with team members to ensure production roles are clear., • Ability to regularly communicate with engineers and design staff to ensure designs are being implemented correctly., • Experience using tools to make or repair parts and products., • Excellent hand-eye coordination., • Ability to differentiate between colors to identify colored electrical wires., • Attention to detail and the maintenance of a clean workspace., • Ability to read parts lists and make sure all are present., • Familiarity with undergoing routine preventive maintenance., • Experience maintaining inventory and placing orders for more supplies as needed., • Basic computer skills to complete quality control forms., • Familiarity working in an ESD and FOD-controlled environment.

Job Description Job description Overview: We are seeking a skilled Low Voltage Technician to join our team. The ideal candidate will have expertise in low voltage cabling, computer networking, audio video, and security cameras. You will have the opportunity to learn computer networks and troubleshooting techniques to broaden you technical career. Responsibilities: • Install, terminate, maintain, and repair low voltage systems including audio, video, and data, phone networks, • Perform cabling and wiring installations for various systems, • Troubleshoot and diagnose issues with low voltage equipment, • Ensure compliance with NEC (National Electrical Code) standards, • Collaborate with team members to complete projects efficiently, • Test and configure computer hardware components, • Provide technical support for technical staff Qualifications: • Proficiency in low voltage systems and low voltage electrical work, • Knowledge of computer networking and telecommunication systems, • Mechanical aptitude for handling various tools and equipment, • Familiarity with Ethernet testing equipment, volt meters, cable tester, • Experience in working with fiber, access control, alarm systems is a plus If you are a detail-oriented individual with a passion for low voltage technology and possess the required qualifications, we encourage you to apply for this exciting opportunity. Company DescriptionAt our company, we value integrity, professionalism, and a passion for technology. We are dedicated to providing top-notch customer service, understanding our clients' unique needs, and delivering tailored solutions that exceed their expectations.At our company, we value integrity, professionalism, and a passion for technology. We are dedicated to providing top-notch customer service, understanding our clients' unique needs, and delivering tailored solutions that exceed their expectations.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add an Electronics Assembly Technician II to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. As an Electronics Assembly Technician at Cesium Astro, you will be a key team member in ensuring the quality and delivery of our products meets our customer's expectations. The ideal candidate will have experience in high-reliability industries such as Aerospace, Automotive, or Medical devices. You must be responsive, flexible, and able to succeed in a fast-paced environment and be capable and motivated to build, repair and maintain an SMT circuit card and electronics final assemblies. As we are a start-up the expectation is that we all wear many hats, and at times you may be asked to assist in additional duties such as performing cycle counts of inventory, assisting in shipping and receiving functions, or other tasks. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • A high school diploma or GED., • 2 years of experience in electronic assembly operations such as SMT, AOI, Prepping Components, X-Ray, De-Panel, and Soldering., • Experience in interpreting schematics, drawings, diagrams, and other visual aides for assembly., • Ability to work with team members to ensure production roles are clear., • Ability to regularly communicate with engineers and design staff to ensure designs are being implemented correctly., • Experience using tools to make or repair parts and products., • Excellent hand-eye coordination., • Ability to differentiate between colors to identify colored electrical wires., • Attention to detail and the maintenance of a clean workspace., • Ability to read parts lists and make sure all are present., • Familiarity with undergoing routine preventive maintenance., • Experience maintaining inventory and placing orders for more supplies as needed., • Basic computer skills to complete quality control forms., • Familiarity working in an ESD and FOD-controlled environment.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add an Electronics Assembly Technician II to our team on 2nd shift. If you enjoy working in a startup environment and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. As an Electronics Assembly Technician at Cesium Astro, you will be a key team member in ensuring the quality and delivery of our products meets our customer's expectations. The ideal candidate will have experience in high-reliability industries such as Aerospace, Automotive, or Medical devices. You must be responsive, flexible, and able to succeed in a fast-paced environment and be capable and motivated to build, repair and maintain an SMT circuit card and electronics final assemblies. As we are a start-up the expectation is that we all wear many hats, and at times you may be asked to assist in additional duties such as performing cycle counts of inventory, assisting in shipping and receiving functions, or other tasks. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • A high school diploma or GED., • 2 years of experience in electronic assembly operations such as SMT, AOI, Prepping Components, X-Ray, De-Panel, and Soldering., • Experience in interpreting schematics, drawings, diagrams, and other visual aides for assembly., • Ability to work with team members to ensure production roles are clear., • Ability to regularly communicate with engineers and design staff to ensure designs are being implemented correctly., • Experience using tools to make or repair parts and products., • Excellent hand-eye coordination., • Ability to differentiate between colors to identify colored electrical wires., • Attention to detail and the maintenance of a clean workspace., • Ability to read parts lists and make sure all are present., • Familiarity with undergoing routine preventive maintenance., • Experience maintaining inventory and placing orders for more supplies as needed., • Basic computer skills to complete quality control forms., • Familiarity working in an ESD and FOD-controlled environment.

Job DescriptionDescriptionEagle Eye Networks, a Brivo solution, is the global leader in cloud video surveillance, delivering cyber-secure, cloud-based video with artificial intelligence (AI) and analytics to make businesses more efficient and the world a safer place. The Eagle Eye Cloud VMS (video management system) is the only platform robust and flexible enough to power the future of video surveillance and intelligence. Eagle Eye is based in Austin, Texas, with offices in Amsterdam, Bangalore, and Tokyo. Eagle Eye Networks is a dynamic, fast-moving company. We value the benefits of face-to-face collaboration, and we believe it is more enjoyable and productive. The synergy of in-office interaction is critical to our culture and your presence is essential for Eagle Eye Networks’ success. Summary Eagle Eye Networks is growing and seeking an Assembly Technician. This is an entry-level role with a range of $16.00 - $18.00 per hour. The Assembly Technician will work closely with the Supply Chain Manager and the manufacturing team to ensure all computer-type equipment is to standard according to Standard Operating Procedures and quality ready for the customer. Eagle Eye Networks is growing rapidly, and the manufacturing hardware technician role is also expected to grow and expand its contribution to the company. Key Responsibilities • Prepare and assemble materials, switches, bridges, CMVR's, • Build product sub assemblies or final assemblies, • Able to assemble and disassemble computers efficiently, • Strong knowledge of all computer hardware components which include chipsets, RAM and CPU’s, • Load software and test equipment upon assembly completion, • Navigate and Operate Bios in the software download, • Inspect finished products for quality and adherence to customer specifications, • Maintain a high level of attention to detail to reduce manufacturing defects, • Strong hardware troubleshooting capabilities with equipment, devices or products, • Ability to work in a fast-paced environment, • Communication skills are required to ensure the accuracy of the manufacturing process, • 8-hour shifts (starting at 7 am or 8 am), • Able to bend, stand, move inventory and assemble the product for 8 hours/day, • Able to lift 20-50 pounds, • Basic skills with electrical tools a plus, • Medical Benefits: We offer competitive medical, vision, and dental plans. Company offsets premiums., • Taco Tuesdays: Like breakfast tacos? You’re at the right place, because weekly breakfast tacos are provided., • 401k plan with company match!, • Weekly Lunch: Food is love. Especially when it is free., • Snacks: You will never go hungry., • Culture: Innovation drives our vibe., • Diversity: We embrace our global presence, the diverse ideas and backgrounds of our team to improve our culture, our products and grow our people and our business., • PTO: Hourly employees accrue PTO each pay period for a total of 12 days each year.

Installing and configuring computer hardware, software, systems, networks, printers and scanners. Monitoring and maintaining computer systems and networks. Computer/IT Job Duties: Setting up

Pay attention to customers’ descriptions of their computer problems Ask customers questions to properly diagnose the problem Walk customers through the recommended problem-solving steps Set up or repair computer equipment and related devices Train users to work with new computer hardware or softwa

Series B Startup | $500 Valuation | Revolutionizing Hardware Testing This Jobot Job is hosted by: Caitlyn Hardy Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $150,000 - $210,000 per year A bit about us: Join a fast-growing, well-funded Series B startup at the forefront of building the modern test stack for hardware engineering teams. Founded by MIT, SpaceX, Palantir, Anduril, NASA, and Harvard alumni and backed by top-tier investors like Founders Fund and General Catalyst. This company is revolutionizing how aerospace, autonomy, clean energy, and advanced manufacturing teams collect, validate, and act on real-time data. Why join us? ?? High-growth startup with long runway and serious backing ?? Ownership and impact: Build features from scratch, influence the roadmap ?? Deeply technical product serving cutting-edge industries ?? Competitive salary + meaningful equity ?? 100% covered health benefits, 401(k), unlimited PTO, learning stipends Job Details Job Responsibilities • Develop and deploy tailored software solutions, tools, and integrations that address unique customer needs, with a strong focus on fast iteration and functional prototypes., • Design and maintain robust data workflows that facilitate seamless connectivity between client data systems and our internal platforms, often operating in highly technical and unconventional environments., • Collaborate closely with cross-functional teams—including Sales and Operations—to support technical evaluations, guide pre-sales discussions, and define the scope of customer-facing projects., • Serve as a key voice of the customer by relaying technical feedback and user insights to influence product direction and shape future feature development., • Proven experience in software development, particularly in environments that require adaptability and a high degree of autonomy., • Strong analytical thinking and creative problem-solving skills, with the ability to work efficiently and independently., • A user-first perspective with a clear enthusiasm for applying software to real-world, high-impact engineering challenges., • Eagerness to be part of an early-stage team building tools that enhance the capabilities of advanced hardware systems and teams., • Willingness to travel up to 25–50% to engage directly with customers at technical sites, such as aerospace test facilities or high-precision manufacturing environments., • Experience building backend systems using Java or any other backend languages, tools, and frameworks, • Bachelor's degree in Computer Science preferred Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup founded by two ex-Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and continuous learning. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop have a real-world impact. Position Overview We are looking for a motivated Inventory Control Specialist to join our team. In this role, you’ll learn the ins and outs of our supply chain while helping us manage the essential materials that power our production line. This is a great opportunity to get hands-on experience in a fast-paced environment and play a vital part in delivering state-of-the-art technology to the DoD What You’ll Do ● Inventory Management: Maintain accurate and up-to-date records of all inventory items. Monitor inventory levels and reorder points to prevent stockouts and overstock situations. ● Prepare 'kits' for the production team by gathering all necessary parts and hardware listed on manufacturing orders, ensuring the assembly line has everything they need to start work immediately ● Conduct regular inventory counts and reconcile discrepancies ● Procurement Collaboration: Collaborate with the procurement team to ensure accuracy of timelines, forecasting and deliveries of components and materials. ● Documentation and Reporting: Generate inventory reports, including stock levels, usage, and trends. Maintain documentation related to inventory processes and transactions ● Process Improvement: Continuously evaluate and improve inventory control procedures and systems. Identify opportunities to enhance efficiency and reduce costs ● Compliance and Security: Ensure compliance with all relevant regulations and internal security protocols for handling sensitive materials. Safeguard inventory against theft, damage, and unauthorized access ● Collaboration: Collaborate with cross-functional teams, including procurement, production, and logistics, to ensure smooth operations. Communicate inventory-related issues and recommendations to management What You Bring To Us ● Prior experience in a stockroom, retail inventory, or warehouse setting is a plus, but not required. A background in a fast-paced environment where you had to track parts or supplies is ideal ● Strong analytical and problem-solving skills ● Excellent communication and interpersonal skills ● Detail-oriented with a commitment to accuracy ● Ability to work in a fast-paced, dynamic environment ● Knowledge of defense industry regulations and compliance standards is a plus What You’ll Need To Be Successful ● Skill in both verbal and written communication ● Prioritize and manage multiple tasks, changing priorities as necessary ● Work under pressure and adapt to changing requirements with a positive attitude ● Self‐motivated, proactive and an effective team player ● Interact effectively and professionally with all levels of employees, both management and staff alike, vendors, clients, and others We Are Looking For Someone Who ● You are proactive and resourceful, you don’t wait for permission to solve problems. ● You are detail-oriented, but can zoom out and think strategically about systems and scalability. ● You have a hospitality mindset, you anticipate others’ needs and take pride in creating a welcoming and effective workspace. ● You thrive in a fast-paced, ambiguous environment, and you’re energized by building things from scratch. ● You’re excited to support a team of engineers and remove obstacles so they can focus on building. What We Offer ● Competitive salary ● ACS Equity Package ● Health, Dental, Vision Insurance ● Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup founded by two ex-Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and continuous learning. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop have a real-world impact. Position Overview We are looking for a motivated Inventory Control Specialist to join our team. In this role, you’ll learn the ins and outs of our supply chain while helping us manage the essential materials that power our production line. This is a great opportunity to get hands-on experience in a fast-paced environment and play a vital part in delivering state-of-the-art technology to the DoD What You’ll Do ● Inventory Management: Maintain accurate and up-to-date records of all inventory items. Monitor inventory levels and reorder points to prevent stockouts and overstock situations. ● Prepare 'kits' for the production team by gathering all necessary parts and hardware listed on manufacturing orders, ensuring the assembly line has everything they need to start work immediately ● Conduct regular inventory counts and reconcile discrepancies ● Procurement Collaboration: Collaborate with the procurement team to ensure accuracy of timelines, forecasting and deliveries of components and materials. ● Documentation and Reporting: Generate inventory reports, including stock levels, usage, and trends. Maintain documentation related to inventory processes and transactions ● Process Improvement: Continuously evaluate and improve inventory control procedures and systems. Identify opportunities to enhance efficiency and reduce costs ● Compliance and Security: Ensure compliance with all relevant regulations and internal security protocols for handling sensitive materials. Safeguard inventory against theft, damage, and unauthorized access ● Collaboration: Collaborate with cross-functional teams, including procurement, production, and logistics, to ensure smooth operations. Communicate inventory-related issues and recommendations to management What You Bring To Us ● Prior experience in a stockroom, retail inventory, or warehouse setting is a plus, but not required. A background in a fast-paced environment where you had to track parts or supplies is ideal ● Strong analytical and problem-solving skills ● Excellent communication and interpersonal skills ● Detail-oriented with a commitment to accuracy ● Ability to work in a fast-paced, dynamic environment ● Knowledge of defense industry regulations and compliance standards is a plus What You’ll Need To Be Successful ● Skill in both verbal and written communication ● Prioritize and manage multiple tasks, changing priorities as necessary ● Work under pressure and adapt to changing requirements with a positive attitude ● Self‐motivated, proactive and an effective team player ● Interact effectively and professionally with all levels of employees, both management and staff alike, vendors, clients, and others We Are Looking For Someone Who ● You are proactive and resourceful, you don’t wait for permission to solve problems. ● You are detail-oriented, but can zoom out and think strategically about systems and scalability. ● You have a hospitality mindset, you anticipate others’ needs and take pride in creating a welcoming and effective workspace. ● You thrive in a fast-paced, ambiguous environment, and you’re energized by building things from scratch. ● You’re excited to support a team of engineers and remove obstacles so they can focus on building. What We Offer ● Competitive salary ● ACS Equity Package ● Health, Dental, Vision Insurance ● Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup founded by two ex-Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and continuous learning. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop have a real-world impact. Position Overview We are looking for a motivated Inventory Control Specialist to join our team. In this role, you’ll learn the ins and outs of our supply chain while helping us manage the essential materials that power our production line. This is a great opportunity to get hands-on experience in a fast-paced environment and play a vital part in delivering state-of-the-art technology to the DoD What You’ll Do ● Inventory Management: Maintain accurate and up-to-date records of all inventory items. Monitor inventory levels and reorder points to prevent stockouts and overstock situations. ● Prepare 'kits' for the production team by gathering all necessary parts and hardware listed on manufacturing orders, ensuring the assembly line has everything they need to start work immediately ● Conduct regular inventory counts and reconcile discrepancies ● Procurement Collaboration: Collaborate with the procurement team to ensure accuracy of timelines, forecasting and deliveries of components and materials. ● Documentation and Reporting: Generate inventory reports, including stock levels, usage, and trends. Maintain documentation related to inventory processes and transactions ● Process Improvement: Continuously evaluate and improve inventory control procedures and systems. Identify opportunities to enhance efficiency and reduce costs ● Compliance and Security: Ensure compliance with all relevant regulations and internal security protocols for handling sensitive materials. Safeguard inventory against theft, damage, and unauthorized access ● Collaboration: Collaborate with cross-functional teams, including procurement, production, and logistics, to ensure smooth operations. Communicate inventory-related issues and recommendations to management What You Bring To Us ● Prior experience in a stockroom, retail inventory, or warehouse setting is a plus, but not required. A background in a fast-paced environment where you had to track parts or supplies is ideal ● Strong analytical and problem-solving skills ● Excellent communication and interpersonal skills ● Detail-oriented with a commitment to accuracy ● Ability to work in a fast-paced, dynamic environment ● Knowledge of defense industry regulations and compliance standards is a plus What You’ll Need To Be Successful ● Skill in both verbal and written communication ● Prioritize and manage multiple tasks, changing priorities as necessary ● Work under pressure and adapt to changing requirements with a positive attitude ● Self‐motivated, proactive and an effective team player ● Interact effectively and professionally with all levels of employees, both management and staff alike, vendors, clients, and others We Are Looking For Someone Who ● You are proactive and resourceful, you don’t wait for permission to solve problems. ● You are detail-oriented, but can zoom out and think strategically about systems and scalability. ● You have a hospitality mindset, you anticipate others’ needs and take pride in creating a welcoming and effective workspace. ● You thrive in a fast-paced, ambiguous environment, and you’re energized by building things from scratch. ● You’re excited to support a team of engineers and remove obstacles so they can focus on building. What We Offer ● Competitive salary ● ACS Equity Package ● Health, Dental, Vision Insurance ● Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1

Job Description We are helping our client find a detail-oriented Hardware Integration Technician (Autonomous Systems) to join its team responsible for assembling, installing, and maintaining the complex sensor systems, computing modules, and support hardware that power our autonomous platforms. In this role, you will be at the intersection of automotive and consumer electronics, perfect for those who can fix an iPhone and build a workstation from parts. You will be able to blend skills from IT hardware assembly, electronics repair, and automotive integration. Rate: $22 to $30 per hour As a Hardware Integration Technician, you'll: • Build and install computer systems, sensors, and peripheral modules into vehicles., • Identify and fix hardware issues—whether it’s a faulty cable, a misconfigured BIOS, or a misaligned sensor., • Swap out and upgrade CPUs, GPUs, RAM, SSDs, and sensor modules as needed., • Manage neat and functional internal cabling (USB, Ethernet, CAN, power, video)., • Assist with basic BIOS/UEFI configuration and driver installation., • Test system functionality, verify connections, and apply ESD-safe practices. What You’ll Need Computer Hardware Experience: • Ability to assemble, upgrade, and troubleshoot desktops, laptops, or similar systems., • Basic Electronics Repair Skills: Comfort replacing screens, batteries, logic boards, and diagnosing electrical issues., • Familiarity with Sensors & Peripherals: Understanding of ports, connectors, and common sensor types (USB, Ethernet, CAN, etc.)., • Hands-On Assembly Skills: Precision and care when mounting and wiring hardware in confined spaces., • Troubleshooting Mindset: Strong problem-solving ability with basic knowledge of system-level debugging., • Attention to Detail: High standards for build quality, neatness, and reliability., • Basic Electrical Safety Knowledge: Use of ESD protection, safe handling of PSUs and power cabling., • Teamwork & Initiative: Able to work independently while communicating clearly within a multidisciplinary team. Benefits • Pre-tax commuter benefits, • Employer-subsidized healthcare benefits, • Flexible Spending Account for healthcare costs, • All costs covered for short- and long-term disability and life insurance, • 401k package Commitment: This is a full-time, ongoing contract position, open to candidates local to the Austin area. contract position, open to candidates local to the Austin, TX area.

Job DescriptionDescriptionEagle Eye Networks, a Brivo solution, is growing rapidly and seeking a Shipping and Receiving Clerk. This role's starting rate is $16.50 per hour. The clerk will work closely with the Supply Chain Manager and the manufacturing team to ensure all hardware is delivered timely to our customers. Teamwork and process improvement are the keys to success in accomplishing this mission. Clerks are responsible for keeping records of all products shipped and received in a company. They pack the goods in shipping containers, develop mailing labels and shipping documents, work with our 3PL account representatives, and ensure that all orders have been filled correctly. These workers also verify and scan incoming and outgoing shipments and products to maintain accurate documentation and inventory. Many opportunities for growth within the organization. Key Responsibilities • Pulls, packs, ships and unpacks shipments and deliveries., • Maintains records of incoming and outgoing shipments., • Assists in tracking inventory, • Processes and prepares shipping orders and documentation, • Creates customer return orders., • Assists in boxing and storing finished goods as necessary, • Confirms delivery, • Advises procurement on low inventory of shipping materials, • Ability to work in a fast-paced environment., • 9-hour shifts Monday-Friday (starting at 7 am or 9 am)- possibility to rotate weekly, • Able to bend, stand, move inventory and assemble the product for 8 hours/day, • Able to lift 20-50 pounds, • 3 years experience in shipping and receiving, • High attention to detail, • Strong organization skills, • Able to work as a team, • Interpersonal skills, • Ability to operate a computer, printer, and scanning softwarePreferred Requirements:, • Knowledge in supply chain management a plus, • International shipping experience a plus, • Ability to work occasional weekends, • Medical Benefits: We offer competitive medical, vision, and dental plans. Company offsets premiums., • Taco Tuesdays: Like breakfast tacos? You’re at the right place, because weekly breakfast tacos are provided., • 401k plan with company match!, • Weekly Lunch: Food is love. Especially when it is free., • Snacks: You will never go hungry., • Culture: Innovation drives our vibe., • Diversity: We embrace our global presence, the diverse ideas and backgrounds of our team to improve our culture, our products and grow our people and our business., • PTO: Hourly employees accrue PTO each pay period for a total of 12 days each year.

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders’ successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop have a real-world impact. Position Overview: We are seeking a Robotics Software Test Technician to execute hands-on testing of robotic systems and software. In this role, you will validate control algorithms, perception pipelines, and software features through structured testing to ensure each software deployment improves system safety, reliability, and performance. You will work closely with robotics and software engineers to identify issues, document results, and help drive continuous improvements in system capability. What You'll Do: * Operate a robot, following test protocols to verify system performance. * Test computer vision and perception systems, including tracking reliability across varied lighting conditions, occlusions, and edge-case environments. * Run manual and automated tests to ensure new software releases do not break existing functionality. * Create detailed bug reports including reproduction steps, logs, and environmental context. * Analyze test results and generate performance reports using scripting or visualization tools. * Track and document success/failure rates and performance metrics across test scenarios. * Troubleshoot issues at the hardware–software interface to help isolate root causes. Required Technical Skills: * High School Diploma * 2-3 years of experience as a Test Technician working with Robotics software * Proficiency with Linux/Ubuntu command-line environments. * Ability to read, modify, and write Python or Bash scripts for testing and automation. * Strong troubleshooting skills and mechanical intuition when diagnosing system behavior. * Well-versed with control loops, perception and computer vision and regression testing. * Experience with root cause analysis and documentation. * Able to work on-site in our Austin, TX location. What We Offer: * Competitive salary * ACS Equity Package * Health, Dental, Vision Insurance * Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1

Job Description We are seeking a Full-time Sr Level Computer Vision Engineer to help provide expertise to our team here in Austin TX. Candidates must be local or willing to relocate. Very lucrative opportunity to join a fast-growing start-up with equity ownership. What You'll Do: • Lead the development and optimization of computer vision algorithms for our autonomous gun turret, focusing on real-time drone detection, tracking, and classification., • Design and implement machine learning models that can operate in resource-constrained environments while maintaining high accuracy and reliability., • Collaborate closely with electrical engineers to integrate computer vision systems into the turret's hardware architecture., • Conduct extensive testing and validation of computer vision algorithms in various scenarios to ensure robustness and performance under different environmental conditions., • Mentor junior engineers and contribute to the overall growth of the machine learning and computer vision expertise within the company., • Contribute to the hardening of the prototype turret into a military-grade system and assist in developing variants for different weapon systems and engagement ranges. What You'll Need: • Deep passion for machine learning, computer vision, and robotics, and have been exploring these areas since early in your career., • At least a master's degree in computer science, Electrical Engineering, or a related field, with a strong focus on machine learning and computer vision., • 9+ years of experience working on machine-learning-based computer vision, ideally in the context of robotics., • A proven track record of developing and deploying computer vision systems, ideally in real-time or safety-critical applications., • Proficient in Python, C++, and have experience with machine learning frameworks such as TensorFlow, PyTorch, or similar., • Experience with embedded systems and integrating computer vision algorithms into hardware., • Familiar with various sensors (e.g., cameras, LIDAR, RADAR) and their integration into autonomous systems., • You enjoy mentoring and collaborating with other engineers to solve complex technical challenges.Company DescriptionAt Darbytek, our goal is to build a better future for people and business. We specialize in recruiting skilled individuals for both full-time direct hires and contract positions. Allow us to help you with your next opportunity.At Darbytek, our goal is to build a better future for people and business. We specialize in recruiting skilled individuals for both full-time direct hires and contract positions. Allow us to help you with your next opportunity.

Job DescriptionAbout Paradromics Brain-related illness is one of the last great frontiers in medicine, not because the brain is unknowable, but because it has been inaccessible. Paradromics is building a brain-computer interface (BCI) platform that records brain activity at the highest possible resolution: the individual neuron. AI algorithms then decode this massive amount of brain-data, enabling the seamless translation of thought into treatments. Our first clinical application, the Connexus® BCI, will help people who are unable to speak, due to ALS, spinal cord injuries and stroke, to communicate independently through digital devices. However, the capabilities of our BCI platform go far beyond our first application. With the brain in direct communication with digital devices, we can leverage technology to transform how we treat conditions ranging from sensory and motor deficits to untreatable mental illness. The Role We are looking for an exceptional scientist/engineer to bridge the gap between silicon microfabrication and complex, real-world systems. While many can build a MEMS device in a vacuum, we need someone who understands the physics of integrating those devices into heterogeneous material stacks without compromising performance. You will span the disciplines of materials physics, thermomechanical simulation, and micro-assembly and testing to solve complex challenges in wafer-level and die-level bonding. You will be the primary technical owner of the interface between our core semiconductor devices and the macro-packaging world. Responsibilities • Lead the development of novel bonding processes (wafer-to-wafer, die-to-wafer) involving dissimilar materials., • Optimize protocols for various bonding processes including wafer bonding, diffusion bonding, laser bonding, and more, focusing on interface mechanics, intermetallic formation, and stress management., • Use FEA tools (COMSOL, ANSYS) to model thermal dissipation and perform thermomechanical analysis in multi-material stacks., • Oversee or execute cleanroom processes (lithography, deposition, etching) required to prepare surfaces for high-fidelity integration., • Utilize SEM, TEM, CSAM, and mechanical pull-testing to validate bond quality and reliability under thermal cycling., • Translate complex material requirements into specs for foundry partners or equipment vendors., • Collaborate with Electrical Engineering and Electrode Manufacturing teams to support infrastructure and integration needs., • Optimize development processes and translate them into manufacturing protocols.Required Qualifications, • Ph.D. or M.S. in Materials Science, Applied Physics, Mechanical Engineering, or Electrical Engineering., • 5+ years of hands-on experience in heterogeneous integration or advanced packaging., • Deep expertise in the physics and chemistry of adhesion and bonding with proven experience in at least two of the following: wafer bonding (fusion, anodic, eutectic), TLP (Transient Liquid Phase) bonding, or laser-assisted bonding., • A portfolio of work demonstrating the integration of silicon devices with non-silicon materials (e.g., ceramics, glass, metals, polymers, or III-V semiconductors)., • Proficiency in finite element analysis for thermal and structural mechanics., • Hands-on cleanroom experiences, specifically regarding surface activation and planarization (CMP) for bonding., • Hands-on experiences and knowledge with mechanical and electrical testing instruments, and building customized test setups.Preferred Qualifications, • Familiarity with the requirements and testing of hermetic packaging for MEMS, • Familiarity with methods and instruments for package and interface integrity characterization., • Familiarity with polymer-to-inorganic material adhesion and testing., • Experience designing micro-heaters or managing high-heat-flux devices. Paradromics is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin. Powered by JazzHR MdfB1h3sRL

Job Description At TerraFirma, we’re redefining how the world moves earth for construction. Founded by former SpaceX engineers and backed by Bain Capital Ventures, TerraFirma is automating construction to make it faster, cheaper, and safer. Our Story & Mission At SpaceX, we were part of the teams that built the largest rocket in human history, launched the largest constellation of satellites ever made, and delivered connectivity to millions of people worldwide. What we learned was simple: infrastructure is everything. At Starbase, the biggest barrier to launching missions to Mars was not building the rocket. It was how slow, expensive, and complex it was to build the infrastructure around it. We lacked buildings, roads, water, power, communications, and waste management, and constructing them took far more time and resources than it should have. From a first-principles perspective, that doesn't make sense. It shouldn't be this hard or costly to create the foundations for progress. That’s when we realized something important: the same engineering mindset that enabled us to tackle space exploration and mass manufacturing could be applied to infrastructure. By bringing the principles of simplification, iteration, acceleration, and automation to construction, we can unlock a new era in how the world builds. Accelerating infrastructure unlocks progress across every domain, creating a self-sustaining engine for tackling humanity’s toughest challenges. The innovations we develop on Earth will lay the groundwork for the technologies that one day make settlement on Mars possible. Job Overview In this role, you’ll take hands-on ownership of various systems spanning hardware and software, and analog and digital domains. Initially, you'll lead the development of a new DSP system from concept to functional prototype, owning the full hardware and software stack. Daily tasks will include designing and testing RF frontends, analyzing digital signals, running field tests, and creating algorithms to detect patterns and synthesize sensor data for extracting meaningful features from RF and EM interactions with the environment. Alongside building custom hardware, you’ll oversee validation and testing campaigns as needed. Responsibilities * Own the system architecture for an electromagnetic sensing application from concept through first prototype * Design and validate new sensor hardware. Must be comfortable with RF circuit and antenna concepts and ready to dive into real-time FPGA processing * Develop, test, and deploy algorithms in realms of sensor fusion, image processing, and object detection in Python/R/C++. Be ready to explore reinforced learning for a higher degree of confidence * Work with interdisciplinary teams to design, test, and deliver custom hardware and software solutions * Take on leadership roles when required, mentor new employees, and actively participate in the hiring process Basic Qualifications * B.S. in Electrical Engineering, Computer Engineering, or a closely related field * 2+ years of professional or project experience with RF, DSP, or electrical engineering with hands-on hardware development and prototyping * Proficiency in fundamentals of signals analysis and electrical engineering * Demonstrated experience owning large-scale deliverables, leading teams, and driving product roadmaps Preferred Skills & Experience * Strong background in digital and image signal processing, machine learning, and efficient manipulation of large datasets for high-throughput analysis * Experience designing or testing radar systems including antennas/frontends targeting the VHF and UHF bands * Experience with FPGAs, including hardware design, HDL programming, and common low-level and embedded protocols * Experience prototyping with SDR and open source tools like GNU Radio * PCB design experience for rapid prototyping, including schematic capture and layout * Familiarity with C/C++, Python/R, and Linux systems * Solid understanding of antenna design and analysis * Experience designing and running test campaigns for qualification/acceptance for custom hardware * Experience with component selection and integration for SoCs, FPGAs, MCUs, and custom ICs Additional Requirements * Must be willing to work extended hours or weekends when needed to support critical deadlines or triage urgent deployment issues * Comfortable with working in a fast-paced startup environment * Must be willing to relocate to Austin, TX if not within commuting distance Compensation & Benefits Base compensation will vary based on factors such as relevant experience and education. Salaries and leveling will be determined on a case-by-case basis if an offer is extended. Our total compensation package also includes equity in TerraFirma. Relocation packages are available to help cover moving costs, if applicable.

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. About The Role: We are looking for a Mechanical Drafter to support our engineering team in developing detailed mechanical drawings, 3D models, and documentation for our autonomous defense systems. This role will focus on creating and maintaining accurate design documentation, ensuring drawings meet manufacturing requirements, and supporting engineers throughout the product development process. You'll play an important role in translating engineering concepts into clear, manufacturable designs. What You'll Do: * Create and revise detailed mechanical drawings, 3D models, and assemblies in SolidWorks for manufacturing. * Develop and maintain accurate drawing packages, BOMs, and part libraries. * Support mechanical engineers by converting design concepts into clear and precise technical drawings. * Collaborate with mechanical, electrical, and embedded teams to ensure mechanical designs integrate properly with system components. * Assist with design revisions, prototyping efforts, and documentation updates during product development cycles. * Apply drafting standards, GD&T, and tolerancing practices to ensure manufacturable and production-ready designs. * Maintain organized documentation and ensure drawings follow internal engineering standards and revision control processes. * Work with fabrication and assembly teams to resolve design issues and support production. What You'll Need: * Associate’s or Bachelor’s degree in Drafting, Mechanical Engineering Technology, Electrical Engineering Technology, or a related field. * 2+ years of experience drafting in a mechanical/electrical engineering environment. * Proficiency with SolidWorks for mechanical modeling and drafting. * Familiarity with GD&T, mechanical tolerancing, and drafting standards (ASME Y14.5). * Understanding of mechanical assemblies, fasteners, and electro-mechanical systems. * Ability to interpret engineering concepts and translate them into accurate technical drawings. * Excellent attention to detail and organizational skills. * Comfortable working in a fast-paced, highly collaborative environment. You'll Stand Out: * Experience supporting hardware development in defense, aerospace, robotics, or industrial equipment. * Hands-on experience supporting rapid prototyping or prototype builds. * Exposure to configuration management systems and PLM tools. * Experience with 3D printing or rapid prototyping technologies. * Prior work in a startup or high-velocity engineering team. What We Offer: * Competitive salary * ACS Equity Package * Health, Dental, Vision Insurance * Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-AS1

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders’ successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop have a real-world impact. Position Overview We are seeking an experienced CV/ML Platform Engineer with specialization in Computer Vision and Machine Learning (CV/ML) to design, build, and own the data, model, and compute infrastructure powering ACS CV/ML team. You will help manage a 130+ GPU bare-metal Kubernetes cluster, own CV/ML CI/CD pipelines, and ensure ML model training proceeds at high volume with low friction. What You'll Do: * Deploy and operate Kubernetes clusters on bare-metal infrastructure hosting 130+ NVIDIA GPUs, with hybrid burst capability to AWS for scalable compute and storage workloads. * Manage NVIDIA GPU clusters for ML training. * Own the ACS CV/ML CI/CD pipeline. * Improve and maintain core ML infrastructure, such as model registration and versioning, experiment tracking, and model and data provenance tracking. * Improve and maintain ML model testing, performance analysis, and reporting tools. * Automate repetitive model training and testing tasks to increase developer velocity. * Work with Software Team Platform Engineers to ensure efficient coordination and minimal duplication between CV/ML infrastructure and wider Software infrastructure. * Collaborate with the Software Team to automate the optimization of models (TensorRT/quantization) for deployment on NVIDIA Jetson and other edge hardware. Required Technical Skills: * 2+ years of experience in Platform Engineering or DevOps/MLOps. * Strong programming skills are required for automating ML lifecycles and building custom CLI tools for CV engineers. * Hands-on experience with NVIDIA GPU infrastructure, including managing CUDA libraries and development environments, GPU Operator, device plugins, and scheduling (MIG, Volcano, or fractional GPU sharing). * Experience implementing and maintaining MLOps platforms such as Kubeflow, MLflow, Weights & Biases (W&B), or DVC for experiment tracking and model versioning. * Familiarity with high-performance storage solutions (e.g., MinIO, WEKA, or Ceph) and data orchestration tools capable of handling terabytes of video/image data. * Proven track record building CI/CD pipelines that include automated model validation, performance benchmarking, and artifact management for both cloud and edge targets. * Experience with model optimization toolchains, including TensorRT, ONNX, and quantization techniques, specifically for cross-compilation to ARM targets like NVIDIA Jetson. * Proficiency with observability stacks (ELK, Prometheus/Grafana) adapted for ML, including monitoring GPU health, training throughput, and model inference metrics. * Strong Linux systems knowledge (Debian/Ubuntu), including networking for high-throughput data, storage, and security hardening for defense-grade production environments. What We Offer * Competitive salary * Health, Dental, Vision Insurance * Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-AS1

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job Summary: The Global Security Operations Center (GSOC) Supervisor will lead a team of GSOC operators to deliver a seamless and efficient customer service and incident management experience. This role involves developing and implementing SOPs for GSOC systems monitoring, incident response, and escalations. The ideal candidate is experienced with incident response, crisis management, and basic troubleshooting of physical security systems. Responsibilities: • Lead a team of GSOC operators who monitor for, and respond to, physical security incidents., • Develop and implement emergency management protocols and procedures to enhance crisis response capabilities., • Collaborate with Risk Intelligence, IT, and InfoSec to respond to incidents., • Conduct regular training and exercises to prepare GSOC staff to respond to incidents., • Collaborate with the Security Systems team to report malfunctions, conduct troubleshooting, and identify use cases for new tools., • Implement and maintain a culture of customer service excellence. Qualifications:, • High school diploma or equivalent required; associate or bachelor's degree in Criminal Justice, Security Studies or a related field preferred., • 2+ years of experience in GSOC operations., • Knowledge of physical security systems., • Experience leading physical security incident response., • Experience training GSOC operators., • Ability to work in a fast-paced, dynamic environment., • Ability to collaborate across business units to deliver on-time installation of systems and troubleshoot malfunctions. Preferred Skills:, • Ability to handle sensitive information with discretion., • Ability to assess risk and make an informed-decision during fast-paced incidents., • Ability to develop and lead incident after action reviews. Work Environment:, • This role requires working in a well-lit room without windows. Extended hours may be necessary to support mission-critical operations. Physical Demands:, • Prolonged periods of sitting at a desk and working on a computer.

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job Summary: The Global Security Operations Center (GSOC) Operator will deliver a seamless and efficient customer service and incident management experience. This role involves systems monitoring, incident response, and escalations. The ideal candidate has strong customer service skill and is experienced with incident response and basic troubleshooting of physical security systems. Responsibilities: • Monitor for, and respond to, physical security incidents., • Collaborate with Risk Intelligence, IT, and InfoSec to respond to incidents., • Notify incident commanders and escalate incidents per protocol, • Participate in regular training and exercises for incident response., • Collaborate with the Security Systems team to report malfunctions and conduct troubleshooting., • Maintain a culture of customer service excellence.Qualifications:, • High school diploma or equivalent required; associate or bachelor's degree in Criminal Justice, Security Studies or a related field preferred., • 1+ year of experience in a physical security role., • Knowledge of physical security systems., • Experience in incident response., • Ability to work in a fast-paced, dynamic environment., • Ability to collaborate across business units to resolve incidents. Preferred Skills:, • Ability to handle sensitive information with discretion., • Ability to assess risk and make an informed-decision during fast-paced incidents., • Ability to communicate clearly and effectively both written and vocal. Work Environment:, • Extended hours may be necessary to support mission-critical operations. Physical Demands:, • Prolonged periods of sitting at a desk and working on a computer.

Job Description Company Overview: Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders’ successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop have a real-world impact. Position Overview: We are seeking an experienced Systems/Software Engineering Manager to lead and grow a multidisciplinary engineering team working across firmware, software, electrical, and mechanical systems. This role is both technical and managerial, requiring hands-on engineering judgment alongside strong leadership, execution, and communication skills. The ideal candidate will help drive architecture decisions, guide system-level integration, and ensure on-time delivery of complex, mission-critical defense products. What You’ll Do: * Team Leadership and Development: Lead, mentor, and manage a team of engineers across multiple disciplines. Foster a high-performance, engineering-first culture focused on accountability, technical excellence, and continuous improvement. * Technical Oversight and Architecture: Provide technical direction and review for firmware, software, and hardware designs. * Ensure system architectures are robust, scalable, and aligned with performance and reliability requirements. * Project Execution: Own engineering execution from concept through deployment. Partner with leadership to define priorities, timelines, and milestones, and ensure projects are delivered on schedule and within scope. * Cross-Functional Collaboration: Work closely with product, operations, and leadership to align engineering efforts with company objectives and customer needs. * System Integration and Validation: Oversee system integration, testing, and validation efforts to ensure designs meet military-grade performance, safety, and reliability standards. * Process and Documentation: Establish and maintain engineering processes, design reviews, and documentation standards to support rapid development and long-term maintainability. What You’ll Need: * Experience: 7+ years of professional engineering experience, with at least 2+ years in an engineering leadership or management role. * Educational Background: Bachelor’s or Master’s degree in Electrical Engineering, Computer Science, or a related field. * Technical Background: Strong understanding of embedded systems, robotics, autonomous systems, or defense-related technologies. * Leadership Skills: Proven ability to lead teams, manage performance, and develop engineers at varying career stages. * Systems Thinking: Experience overseeing complex, multidisciplinary systems involving software, firmware, electronics, and mechanical components. * Execution Focus: Strong project management instincts with the ability to balance speed, quality, and technical risk. * Communication: Excellent written and verbal communication skills, with the ability to clearly convey technical concepts to both technical and non-technical stakeholders. You’ll Stand Out: * Defense or Robotics Experience: Prior experience in defense systems, robotics, autonomous platforms, or safety-critical environments. * Hands-On Engineering Background: Previous experience as a senior or staff-level engineer in embedded, firmware, or robotics systems. * Scaling Teams: Experience building or scaling engineering teams in fast-paced startup environments. * Systems Integration: Deep familiarity with integrating sensors, actuators, control systems, and real-time software into cohesive products. What We Offer: * Competitive salary * ACS Equity Package * Health, Dental, Vision Insurance * Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-AS1

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview As a Supplier Quality Engineer, you will be the primary guardian of quality for all materials and components entering our facility. You will ensure our supply base is capable, compliant, and synchronized with our production requirements. This role requires a high-energy problem solver who can work across functional groups—from Engineering to Procurement—to resolve technical blockers and drive continuous improvement in a rapid-growth environment. What You’ll Do: * Audit & Qualify: Perform supplier audits and assessments to ensure technical, manufacturing, and quality capabilities align with company standards. * Manage Non-Conformance: Lead the Root Cause and Corrective Action (RCCA) process for supplier-related defects, ensuring robust solutions are implemented to prevent recurrence * APQP & PPAP: Drive Advanced Product Quality Planning and Part Approval Processes to ensure new components are "right first time" before hitting the production line. * Visibility & Reporting: Create visibility into supplier performance using Scorecards, Cost of Poor Quality (COPQ) metrics, and Defect Per Million Opportunities (DPMO) reporting. * Change Management: Review Engineering Change Orders (ECOs) for impact on supplier tooling and processes, ensuring seamless transitions without supply chain disruption. * Collaborate & Expedite: Partner with Procurement to identify high-risk suppliers and provide on-site technical support to unblock production-critical shortages. What You’ll Need: * Education: BS in Engineering or a related technical field. * Experience: 3+ years of experience in Supplier Quality, Quality Engineering, or Manufacturing Engineering. * Technical Proficiency: Strong command of GD&T (Geometric Dimensioning and Tolerancing), statistical process control (SPC), and ERP systems. * Problem Solving: Proven ability to lead 8D, 5-Why, or Fishbone investigations to resolve complex manufacturing issues. * Industry Context: Experience in aerospace, automotive, or high-complexity hardware industries. * Experience with AS9100/ISO9001 standards, Six Sigma Green/Black Belt certification, or familiarity with US export controls (ITAR/EAR). What We Offer: * Competitive salary * ACS Equity Package * Health, Dental, and Vision Insurance * Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1

Job Description Electrical Engineer (Systems Generalist) About Paradromics Brain-related illness is one of the last great frontiers in medicine, not because the brain is unknowable, but because it has been inaccessible. Paradromics is building a brain-computer interface (BCI) platform that records brain activity at the highest possible resolution: the individual neuron. AI algorithms then decode this massive amount of brain-data, enabling the seamless translation of thought into treatments. Our first clinical application, the Connexus® BCI, will help people who are unable to speak, due to ALS, spinal cord injuries and stroke, to communicate independently through digital devices. However, the capabilities of our BCI platform go far beyond our first application. With the brain in direct communication with digital devices, we can leverage technology to transform how we treat conditions ranging from sensory and motor deficits to untreatable mental illness. The Role The Electrical Engineer (Generalist) will own and support system-level electrical development across hardware, programmable logic, and mixed-signal domains. This role focuses on system integration, bring-up, debugging, and stabilization rather than solely PCB layout. Working closely with cross-functional teams—including FPGA, firmware, mechanical, and test engineers—this person will drive hardware systems from prototype through validation and early production. The ideal candidate is comfortable operating across digital, analog, power, and signal integrity domains and thrives in fast-paced, multidisciplinary environments. Responsibilities • Lead system bring-up and stabilization across hardware and programmable logic platforms., • Debug FPGA-based systems at both the board and system level, collaborating with digital design teams., • Develop structured debug plans and execute root cause analysis across electrical, firmware, and system domains., • Analyze and optimize digital system architecture including clocking schemes, reset strategies, high-speed data paths, and timing considerations., • Evaluate and troubleshoot analog and mixed-signal subsystems including power regulation, grounding, EMI mitigation, and signal integrity., • Support integration of subsystems involving wireless power transfer, RF signaling, or optical communication links., • Develop Python-based tools for lab automation, instrument control, data capture, and validation workflows., • Support system-level validation, characterization, and field testing activities., • Contribute to technical trade studies and clearly communicate design trade-offs across teams., • Demonstrated ownership of system bring-up and stabilization across hardware and programmable logic platforms., • Strong experience debugging FPGA-based systems at the board and system level., • Solid understanding of digital system architecture including clocking, resets, high-speed data paths, and timing constraints., • Working knowledge of analog and mixed-signal fundamentals including power regulation, signal integrity, grounding, and EMI principles., • Experience supporting or integrating systems involving wireless power transfer, RF signaling, or optical communication links., • Proficiency in Python for test automation, lab control, data analysis, or validation infrastructure., • Ability to develop structured debug plans and drive root cause analysis across multiple technical domains., • Experience supporting system-level validation, field testing, or early production hardware., • Strong ability to synthesize cross-domain findings and communicate technical trade-offs clearly., • Comfort working in fast-paced hardware development environments with evolving requirements. Preferred Qualifications • Experience collaborating closely with FPGA/RTL design teams., • Exposure to regulated hardware environments (medical, aerospace, industrial, etc.)., • Familiarity with high-speed interfaces (e.g., SERDES-based links, DDR memory systems)., • Experience designing or supporting hardware test infrastructure., • Background in multidisciplinary system integration efforts. Paradromics is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin. Powered by JazzHR JW9uu3rCh2

Job DescriptionSenior Network EngineerEmployment Type: Full TimeDepartment: Information Technology CGS is seeking an experienced Senior Lead Network Engineer to join a team focused on the evaluation, enhancement, and maintenance of a large-scale network project that includes both wired and wireless network infrastructure and related hardware & software. The project's objectives are to evaluate the current setup of existing disparate networks and design & implement a network infrastructure that encompasses the wireless, wired, and software network requirements. The project will also include consultation regarding hardware and software necessary to facilitate the proper support for this encompassing infrastructure, and the associated systems testing, vulnerability assessments, and quality assurance needed to implement the new setup. This Network Engineer will interface with state and local governmental personnel, internal stakeholders, subject matter experts, and vendor(s) who will provide development services. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Operate and manage NPS network infrastructure;- Improve infrastructure monitoring and reporting capabilities based on the deployment of network management software;- Develop, maintain and deliver infrastructure documentation relating to the network infrastructure within the NPS environment;- Review current best practices and provide recommendations for architecture, design, management and operation of the network infrastructure;- Administration of the Cloudpath (or equivalent) onboarding process, monitoring and troubleshooting of wireless network health, maintenance of wireless network infrastructure, implementation of network security patches and software/firmware updates, from 0800 to 1700 PST, Monday-Friday;- Assess the NPS network infrastructure and make recommendations on improvement and optimization;- Define and conduct testing procedures for new infrastructure projects;- Implement technology solutions within the NPS network environment;- Provide design guidance on network solutions within NPS infrastructure projects;- Provide informal training and knowledge transfer to NPS resources on best practices and theory of operation relating to network products. Qualifications:- Bachelor’s Degree from an accredited college or university in Engineering, Computer Science, Business, Information systems or a related discipline.- Strong documentation skills including updating JIRA Tickets, Wiki Pages and Network Diagrams- Ability to communicate with end users, cross-organizational staff and technical assistance center.- CWNA Certification or equivalent- BCNE Certification or equivalent- Experience utilizing (RF) site survey tools such as Ekahau, RF Scanners and Wireshark packet capture software- Strong knowledge of layer 2 switching and layer 3 routing protocols; including VLANs, 802.1w, OSPF and VRRP- Strong knowledge of network security including; 802.1x, MAC Authentication, ACLs, RADIUS and Certificate of Authority (CA)- Strong knowledge of troubleshooting RF and LAN issues- Working knowledge of LINUX, MS Server 2013, VMware, etc.- A Master’s Degree in Engineering, Computer Science, Business, Information systems or a related discipline- At least 3 years experience with disaster recovery plan creation / implementation testing or projects - Experience with penetration testing, vulnerability assessment, and vulnerability testing- Experience with cyber threat information collection and analysis- Working knowledge of Agile/SCUM project management methodologies- Additional Industry certifications/licences Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescriptionBrivo and Eagle Eye Networks (EEN) have joined forces to create the world’s leading cloud-based security and video surveillance ecosystem. Together, we provide an integrated "system of intelligence" that protects over 600 million square feet across 90+ countries. We are seeking a Director of Engineering for Bridge & Devices to lead the teams responsible for the "intelligence at the edge." In this role, you will provide technical and strategic leadership in a lean, fast-paced environment. You will drive the development of the Eagle Eye Networks “Bridge”—the critical Linux-based hardware that connects local area network cameras to our global cloud infrastructure. These devices are responsible for local video storage, secure cloud transmission, bandwidth optimization, and the execution of sophisticated AI and analytics processes at the edge. You will oversee the device-resident containerized software, as well as the cloud-resident control and management services. As a leader in our Austin technology hub, you will be deeply engaged in the full development lifecycle—from discovery and design to global deployment and observation. You will champion an AI-augmented engineering culture, utilizing tools like Claude.ai and GitHub Copilot to accelerate development and unit testing. We are looking for a leader with a startup mindset who thrives when the "buck stops with them" and whose collective performance directly drives our global success. Responsibilities • Strategic Roadmap & Vision: Collaborate with Executive Management and key stakeholders to plan and execute a multi-year roadmap that transitions legacy device architectures into modern, AI-integrated edge services., • Operational Excellence: Ensure the reliable operation and security of the existing global infrastructure in the field while coordinating backend evolution with cloud infrastructure teams., • Engineering Culture & AI Integration: Define and develop the culture for the device software engineering teams. Drive a mandate for software automation, reusability, and high efficiency by integrating the latest AI-assisted development tools (Claude, Testim.io, etc.)., • Architectural Leadership: Implement best practices in software architectural design (microservices, containerization) and mentor senior staff and managers in these practices., • Team Orchestration: Manage daily operations for multiple sub-teams, establishing priorities, workflow roadmaps, and KPIs that measure the effectiveness and quality of team output., • Cross-Functional Partnership: Collaborate with Product, QA (Senior QA Manager), and Cloud teams to deliver synchronized hardware/software releases., • Leadership Experience: 12+ years of increasing responsibility in device software development, including at least 5 years leading multi-functional engineering teams at scale., • Domain Expertise: Demonstrated technical knowledge of C and C++ languages and deep experience with Linux-based embedded devices and firmware., • Architectural Vision: Proven ability to envision and implement a roadmap for device-to-cloud system architecture in close collaboration with executive management., • Cloud-Native Proficiency: Deep experience in the deployment of web-scale tools and patterns, including Docker and Kubernetes, for edge environments., • Agile Mastery: History of driving agile development teams, potentially serving as a Scrum Master or Product Owner, to deliver high-impact solutions., • Video & IoT Protocols: Familiarity with video processing, codecs (H.264/H.265), and related network protocols (RTSP, ONVIF, MQTT)., • SaaS Integration: Experience managing SaaS applications that mesh seamlessly with edge device software., • Communication & Presence: Excellent communication skills are mandatory. This role requires being on-site 5 days a week in our Austin, TX office to lead the local team and hardware labs., • Education: B.S. or M.S. in Computer Science, Electrical Engineering, or a related technical field.Bonus Points, • Language experience in Java and Python., • Specific expertise in the physical security, surveillance, or IoT domains., • Experience leading "Legacy-to-Cloud" modernization projects. Why Work for Brivo?Brivo is a Great Place to Work-Certified™ company and the global leader in cloud-based access control and video surveillance. Following our merger with Eagle Eye Networks, we are building the only platform powerful enough to support the future of AI-driven security. • Innovation-Driven: Work on essential systems that protect the health, safety, and welfare of people and property worldwide., • Experience: We thrive on in-person collaboration and a "one-team" atmosphere. To keep our global teams connected and inspired, we provide a premium onsite experience featuring communal meals, recurring social events, and fully stocked workspaces—ensuring you have everything you need to stay focused while building the future of security., • Total Rewards: We support our people with competitive medical, vision, and dental plans (including company-offset premiums), a 401k with company match, and a Discretionary Time Off (DTO) policy that empowers you to take the time you need to maintain a healthy work-life balance.Individual compensation packages are based on job-related skills, experience, qualifications, work location, training, and market conditions. In addition to cash compensation (base salary and, where applicable, incentive or overtime pay), Brivonians enjoy a robust benefits and perks package tailored to their work location.

Job Description Location: Austin, TX (Onsite, 5 days/week) Job Type: Full-Time About the Opportunity A fast-growing Series-D semiconductor innovator is building programmable coherent DSP solutions for next-generation cloud and AI infrastructure. This role offers the chance to design cutting-edge communication systems from scratch while working with industry experts in a well-funded, high-impact environment. Key Responsibilities Work with algorithm and architecture teams to translate high-level requirements into hardware designs Analyze protocols (e.g., Ethernet) and apply them in design Contribute across all design stages: Micro-architecture definition RTL coding (Verilog/SystemVerilog) Timing-aware, synthesis-friendly design Collaborate with: Verification (testbenches, debug, coverage) DFT (scan, ATPG, BIST) Physical design (floorplanning, timing, routing) Participate in design reviews and present design decisions Run synthesis, generate SDC constraints, analyze timing reports Debug functional and timing issues in pre- and post-silicon stages Optimize for area, power, and performance (PPA) Prepare documentation (micro-architecture specs, interfaces, design guides) Support IP/SoC integration and system-level interfaces Optional: contribute to silicon bring-up and post-silicon validation Stay updated on EDA tools, verification methodologies, CDC/linting practices Requirements 5+ years of ASIC/VLSI design experience Proficiency in RTL coding using Verilog/SystemVerilog Strong understanding of modern ASIC design flows including: High-speed design Low-power techniques Third-party IP integration Lint, CDC, RDC, SVA Synthesis and SDC constraints Bachelors or Masters degree in Electrical or Computer Engineering Nice to Have DFT knowledge (scan, ATPG, BIST) Experience with DSP-oriented design blocks Experience with optical communication systems Experience with 100G+ Ethernet Scripting skills (Python, Perl, TCL) IP/SoC integration experience Strong teamwork, communication, and problem-solving abilities Self-starter mindset and ability to work independently Compensation Benefits Base salary: $160,000 $180,000 Equity package Full medical dental benefits H1-B sponsorship available Onsite in Austin is mandatory Target Background Candidates from leading semiconductor and chip design companies preferred, including (but not limited to): Broadcom, AMD, Nvidia, Qualcomm, Synopsys, Cadence, Marvell, Intel, Lattice, Infineon, GlobalFoundries, TI, and similar organizations.

Job DescriptionSalary: IT Manager Zinda Law Group | Austin, Texas AtZinda Law Group, we're not just a law firm; we're a dynamic force driven by skill, compassion, and an unwavering commitment to making a real difference in people's lives. What sets us apart? We're not afraid to challenge the status quo. We thrive on innovation and leverage cutting-edge technology to redefine the legal landscape. We are currently seeking an experienced IT Manager to join our team. This role is responsible for owning and managing the firms entire technology ecosystem, including infrastructure, systems, security, and software platforms. You will oversee all IT-related operations while leading the implementation, integration, and optimization of systems across the organization. This includes managing vendors, evaluating tools, improving workflows, and ensuring our technology environment is secure, scalable, and efficient. This is a hands-on leadership role that works closely with our existing IT support function while elevating and driving the broader IT strategy and execution across the firm. If you're hard-working, detail-oriented, and capable of taking full ownership of systems and projects from start to finish, Zinda Law Group is a great place to be. Responsibilities • Design and deploy new IT systems, software, and services, ensuring they meet the firms needs and objectives., • Manage tickets and work through hardware and software issues, ensuring the business continues to operate without interruption., • Continuously monitor and evaluate the performance of all technology systems to ensure reliability, security, and cost-effectiveness. Make informed recommendations to improve infrastructure and overall system performance., • Define and own the firms IT infrastructure strategy, architecture, and processes, aligning them with business goals and industry best practices., • Own and manage the firms software ecosystem, including evaluating, selecting, implementing, and consolidating tools across departments., • Manage all IT vendors, software licenses, and contracts, ensuring efficiency, cost control, and proper utilization., • Lead implementation of new systems and tools across the organization, ensuring they are fully configured, adopted, and functioning correctly., • Design and enforce security protocols, including password management, access controls, and system permissions across all platforms., • Partner with key stakeholders to analyze business needs and develop tailored technology solutions that improve efficiency and reduce manual work., • Oversee IT operations and internal ticketing, supporting and improving response times, workflows, and service quality., • Provide expertise in troubleshooting complex hardware, software, and systems-related issues, escalating and resolving when necessary., • Standardize and manage hardware, device setup, onboarding/offboarding processes, and overall system configurations across the firm., • Identify inefficiencies in current workflows and systems, and implement improvements or automation where appropriate., • Lead IT-related projects from planning through full execution, ensuring no partial implementations and strong follow-through to completion. Qualifications • Bachelors degree in Information Technology, Computer Science, Information Systems, or a related field, or equivalent experience., • 5+ years of experience in IT operations, systems, or infrastructure roles, with a proven track record of managing projects and implementing systems across an organization., • Experience managing company-wide IT environments, including hardware, software, and systems infrastructure., • Strong working knowledge of computer systems, security, network and systems administration, databases, cloud-based tools, and business software platforms., • Experience evaluating and implementing software solutions and managing vendor relationships., • Strong critical thinking and decision-making skills, with the ability to analyze complex problems and develop effective solutions.Exceptional project management skills, with the ability to prioritize tasks, manage multiple initiatives, and drive projects through to completion., • Strong attention to detail, particularly in system configuration, permissions, and data accuracy., • Ability to operate both strategically and hands-on within a fast-paced environment. Preferred Qualifications • Experience in a law firm or professional services environment., • Experience with platforms such as QuickBooks, Box, or practice management systems., • Experience with workflow automation tools or system integrations., • Experience leading software migrations or system consolidation efforts. Compensation, Benefits & Perks • $100,000 $150,000 based on experience, • Paid time off (20 days) and 10 paid holidays, • IRA plan with company contribution match (up to 3% match), • Medical, vision, and dental insurance (90% of Medical covered by the firm), • Paid parental leave, • Opportunities for ongoing training and mentoring by our outstanding team, • Opportunities to advance and grow within the firm Zinda Law is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, or other protected status as required by applicable law. By submitting this application I understand Zinda Law may use review publicly available information about me in order to assess my suitability for employment. Disclaimer This job description outlines the general nature and responsibilities of the role but is not an exhaustive list of all duties, skills, or requirements. Duties may be adjusted as needed, and team members may be asked to perform other tasks as assigned, in compliance with applicable laws. Reasonable accommodations will be made for individuals with disabilities.

Job Description Who We Are Thermon is a global industrial technology leader and the world's foremost provider of mission-critical heating solutions. From power generation and semiconductors to oil & gas and food processing, our systems keep essential industries running safely, efficiently, and reliably. We don't just make heaters-we deliver complete, end-to-end solutions that include design, installation, controls, and monitoring. Our people and products transfer the warmth needed to make life work. Headquartered in Austin, Texas, and operating in 18 countries, Thermon is built on the values of Care, Commit, and Collaborate. We're a team of innovators and problem-solvers, united by our mission and driven by a culture of ownership and impact. Who We Want We're looking for a Senior Full-Stack Software Engineer to join our R&D Platforms Team and help build Genesis, our next-generation IIoT controls and monitoring platform. Genesis provides real-time visibility into the performance of industrial heating systems, enabling smarter, safer, and more sustainable operations. This role is ideal for someone who thrives in the backend-fluent in C#/ASP.NET Core, SQL Server, and system architecture-but who can also move up the stack to shape APIs and contribute to a modern React front-end. You'll work to deliver scalable, high-performance solutions that power critical infrastructure around the world. You'll thrive here if you: • Want to make a real impact on a small, empowered team., • Enjoy building a product that solves real-world problems and improves continuously through customer feedback., • Are energized by the challenge of integrating industrial controls hardware into a modern software platform., • Love designing elegant systems and modeling complex data., • Take pride in writing clean, maintainable, and performant code. What You'll Do • Contribute to a robust C#/ASP.NET Core codebase with architectural insight and hands-on development., • Design and evolve scalable, performant system architecture., • Model relational data in SQL Server, optimizing schema and queries for efficiency., • Build and maintain RESTful APIs that expose well-structured data models., • Implement asynchronous messaging patterns (e.g., MQTT, pub/sub) for real-time telemetry and control., • Drive best practices through code reviews, mentorship, and continuous improvement., • Collaborate with hardware teams to integrate legacy and modern control protocols., • Contribute to system documentation (UML, C4) and architectural clarity., • 5+ years of professional experience building full-stack web applications., • Strong expertise in C#/ASP.NET Core, SQL Server, and web technologies, e.g., React., • Solid understanding of software architecture, best practices and design patterns (MVC, repository/unit-of-work, CQRS, Domain-Driven Design)., • Experience with asynchronous/event-driven architectures (e.g., MQTT)., • Familiarity with DevOps best practices, unit testing, and agile development., • Bachelor's degree in Computer Science, Engineering, or related field. Bonus Points For • Experience with containerization and orchestration (Docker, Kubernetes)., • Familiarity with cloud-native services and serverless patterns (Azure Functions, AWS Lambda)., • Experience with front-end testing and C# testing frameworks., • Knowledge of security best practices (OAuth, LDAP)., • Understanding of industrial control protocols (Modbus, CAN Bus)., • Experience with microservices.

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. We are seeking a Structures Analyst to join our innovative team. The successful candidate will lead the structural analysis and design efforts for our advanced maritime technologies, ensuring the integrity and reliability of our autonomous surface vessels (ASVs). Responsibilities • Lead structural analysis and simulation efforts to assess and optimize the performance and reliability of ASV structures under various operating conditions and loads., • Conduct hand calculations based on engineering first principles with respect to design requirements., • Provide technical expertise towards finite element modeling and analysis (FEM/FEA) as well as meshing, post processing, and computation methods., • Collaborate with hardware, product development, and production to optimize designs based on understood and discovered load cases., • Collaborate closely with design and engineering teams to integrate structural considerations into the overall design process, from initial concept development to final implementation., • Conduct detailed analysis of stress, strain, and deformation to identify potential failure modes and areas for design improvement, ensuring compliance with industry standards and regulations., • Write and conduct testing and validation efforts to verify structural performance of designs; interpret test results and provide recommendations for design modifications., • Generate comprehensive technical reports and documentation to communicate analysis findings, recommendations, and design rationale to internal teams and stakeholders. Qualifications, • Bachelor’s degree or greater in Mechanical Engineering, Structural Engineeringor a related field, • 2+ years experience in structural analysis and simulation, using both stress hand calculations and finite element analysis (FEA) software such as Femap (preferred) or ANSYS., • Strong understanding of structural mechanics, materials science, and fatigue analysis, with experience applying these concepts to real-world engineering problems., • Demonstrated ability to lead and mentor junior engineers, providing technical guidance and expertise in structural analysis methodologies and best practices., • Excellent problem-solving skills and a track record of innovative thinking to address challenging engineering issues., • Effective communication skills with the ability to convey complex technical concepts clearly and concisely to diverse audiences., • Ability to travel as needed. Physical Demands, • Prolonged periods of sitting at a desk and working on a computer, • Occasional standing and walking within the office, • Manual dexterity to operate a computer keyboard, mouse, and other office equipment, • Visual acuity to read screens, documents, and reports, • Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job Summary: We are seeking a highly skilled Physical Security Systems Engineer responsible for the design, implementation, integration, and lifecycle management of enterprise physical security technologies. This role will engage in architecture and engineering efforts across video surveillance, access control, intrusion detection, perimeter security, and identity integrations, with a strong emphasis on cloud-managed systems and identity integration. Qualifications: • High school diploma or equivalent required; associate or bachelor's degree in electrical engineering, computer networking, Information Systesms or a related field preferred., • 5+ years of experience in physical security systems engineering., • Hands-on experience with cameras and/or access control., • IP networking fundamentals, • PoE / PoE+, • VLANs and firewall configurations, • Identity & Access Management (IAM), • Door controllers, • Badge readers, • REX devices, • Electrified locks, • Crash bars and maglocks, • Ability to read and create wiring diagrams and network schematics., • Knowledge of physical security standards and compliance (e.g. ISO 27001, NIST 800).Preferred Skills:, • Ability to handle sensitive information with discretion., • Knowledge of network design and function., • Knowledge of electrical systems and cloud environments., • Certifications in Lenel, Verkada, CCure, Genetec and Avigilon. Work Environment, • This role will require working in construction zones. Up to 50% travel is expected and extended hours may be necessary to support mission-critical operations. Physical Demands, • Prolonged periods of sitting at a desk and working on a computer., • Lifting and carrying items up to 20 pounds occasionally (e.g., system hardware).

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Position OverviewSaronic Technologies is seeking a Senior Electrical Engineer to drive research and development efforts in navigation and positioning technologies for autonomous marine systems.This individual will be responsible for evaluating, benchmarking, and integrating cutting-edge navigation and sensor technologies — including GNSS, IMUs, FOGs, LRGs, LiDARs, and supplemental sensing electronics — across Saronic’s fleet of autonomous vessels.This is a hands-on, technically focused role with a strong analytical and experimental component. The ideal candidate brings deep experience in electrical systems design, system-level trade studies, and technology evaluation, and thrives at the intersection of hardware innovation and applied research.Key Responsibilities • Lead R&D initiatives focused on next-generation navigation and positioning solutions for autonomous vessels., • Design and execute benchmarking tests of commercial and prototype systems (GNSS, INS/IMU, radar, LiDAR, Doppler velocity logs, etc.), including lab, dockside, and sea-trial environments., • Perform trade studies and comparative analyses of current and emerging market offerings to inform system selection, integration paths, and performance improvements., • Develop system architectures and interface specifications for integrating navigation sensors with vessel control, autonomy, and data processing subsystems., • Prototype, test, and validate new electrical configurations supporting advanced sensing and positioning., • Author technical reports and white papers summarizing benchmarking results, performance metrics, and recommendations., • Collaborate with autonomy, software, and mechanical teams to ensure seamless sensor fusion and data pipeline integrity., • Mentor junior engineers and contribute to internal R&D roadmaps for navigation system evolution., • Contribute to IP generation, system qualification, and design standardization for future vessel platforms.Required Qualifications, • B.S. or M.S. in Electrical Engineering, Computer Engineering, or related discipline., • 7+ years of professional experience in electrical systems engineering, preferably within marine, aerospace, automotive or defense domains., • Demonstrated expertise with navigation and positioning systems: GNSS, INS/IMU, radar, LiDAR, or sensor fusion., • Proven experience in system-level benchmarking, R&D experimentation, and trade study development., • Strong understanding of signal integrity, timing synchronization, and sensor data acquisition., • Proficiency with schematic and wiring design tools (e.g., Altium, AutoCAD Electrical, or SolidWorks Electrical)., • Experience with communication interfaces such as CAN, Ethernet, and serial protocols., • Excellent technical writing and presentation skills — capable of producing concise, data-driven R&D documentation., • Ability to operate effectively in both lab and field environments, including vessel trials.Preferred Qualifications, • Experience in autonomous or unmanned system development, particularly maritime platforms., • Familiarity with sensor fusion algorithms and real-time data processing pipelines., • Working knowledge of relevant industry standards (ABS, USCG, MIL-STD, IEC)., • Background in environmental testing, EMI/EMC compliance, and system reliability analysis., • Experience supporting hardware-in-the-loop (HITL) or model-based system simulations.Benefits, • Medical Insurance: Comprehensive health insurance plans covering a range of services, • Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care, • Saronic pays 100% of the premium for employees and 80% for dependents, • Time Off: Generous PTO and Holidays, • Parental Leave: Paid maternity and paternity leave to support new parents, • Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses, • Retirement Plan: 401(k) plan, • Stock Options: Equity options to give employees a stake in the company’s success, • Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage, • Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands, • Prolonged periods of sitting at a desk and working on a computer., • Occasional standing and walking within the office., • Manual dexterity to operate a computer keyboard, mouse, and other office equipment., • Visual acuity to read screens, documents, and reports., • Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies.