Concrete jobs in Paterson, New JerseyCreate job alerts

Job Title: Concrete Lab Technician Location: Lyndhurst, New Jersey Hours / Schedule: M-F, 7 AM- 3:45 PM Type: Contract Responsibilities The responsibilities include testing the physical properties of fresh and hardened material, weighing and mixing of small batches of product, and entering the data

Job Description SUMMARY: This position is primarily responsible for maintaining and repairing physical structures of buildings, including electrical and plumbing; repairing/replacing appliances; and maintaining grounds by performing the following duties. DUTIES AND RESPONSIBILITIES: • Receives written work orders or verbal instructions from supervisor for completion, • Cuts grass and trims weeds on organization's property., • Digs flower beds and plants flowers., • Constructs decorative flower garden borders from wood., • Cleans internal areas of buildings, including buffing, dusting, sweeping, and mopping., • Maintains the grounds by picking up trash., • Washes windows., • Empties trash cans and consolidates trash for weekly pickup., • Must possess basic knowledge of hand tools., • Paints interior and exterior walls and trim., • Repairs parking lot and sidewalks with asphalt, cold patching materials, and concrete., • Operates snow removal equipment to maintain parking lots and sidewalks., • Maintains and repairs buildings' plumbing and electrical systems, including replacing worn or defective parts such as switches and fuses., • Repairs or replaces building brick, stone, and concrete., • Maintains and repairs wood parts of buildings., • Replaces worn or damaged parts such as hoses, wiring, and belts, in machines and equipment such as truck, street sweeper, and riding mower., • Assists other departments with moving furniture, appliances and unloading and storing supplies, • If part of on-call rotation, required to respond to all emergency calls onsite within 30 minutes of receiving call., • Performs other related duties as assigned by management. SUPERVISORY RESPONSIBILITIES: • This job has no supervisory responsibilities. QUALIFICATIONS: • High school diploma or general education degree (GED), or one to three months related experience and/or training, or equivalent combination of education and experience., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence clearly and informatively., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals, • Must have competent skills using a variety of tools., • Demonstrated ability to plan and prioritize tasks in a self-directed work environment and maintain high levels of productivity without direct supervision., • Detail oriented., • Able to work in a team environment and take direction., • Able to stand and exert fast-paced mobility for entire shift., • Able to maintain balance, lift, bend, kneel, stoop, and wipe COMPETENCIES: • Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics., • Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others., • Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings., • Diversity - Demonstrates knowledge of EEO policy; Shows respect and sensitivity for cultural differences; Educates others on the value of diversity; Promotes a harassment-free environment; Builds a diverse workforce., • Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values., • Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments., • Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly, • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time. Responds timely to after hour emergencies when on-call., • Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan. PHYSICAL DEMANDS AND WORK ENVIORNMENT: • Continually required to stand, • Continually required to walk, • Occasionally required to sit, • Continually required to utilize hand and finger dexterity, • Frequently required to climb, balance, • Continually required to bend, stoop, kneel or crawl, • Continually required to talk or hear, • Occasionally required to smell, • Frequently exposed to wet and/or humid conditions (non-weather), • Frequently work near moving mechanical parts, • Occasionally work in high, precarious places, • Occasionally work around fumes, airborne particles, or toxic chemicals, • Frequently exposed to outside weather conditions, • While performing the duties of this job, the noise level in the work environment is usually moderate to loud, • The employee must continually lift and /or move up to 10 pounds; frequently lift and/or move up to 25 pounds; and occasionaly lift and/or move up to 50 pounds and more than 100 pounds, • Specific vision abilities required by this job include: Close vision; Distance vision; Color vision; Peripheral vision; Depth perception and ability to adjust focus

Job Description We are currently seeking an experienced and reliable Mason – Block and Brick Installer to join our team. The ideal candidate will have a strong background in masonry work, including the installation of concrete block, brick, and stone for a variety of commercial and residential projects.

Job Description About us: The New Jersey Expanding Capabilities Center (NJECC) is a progressive day habilitation program, servicing adults 21+ with developmental disabilities to be as functional and independent in their day-to-day lives as possible. Our program will provide our clients with the opportunity to participate within their community, gain knowledge and skills to complete day-to-day tasks, as well as practice and engage in social interactions and relationships. Clients will also be provided with access to therapeutic services, including but not limited to occupational therapy, physical therapy, and speech therapy. These therapeutic services not only allow for continuity of care for our clients just recently graduating from high school, but continued opportunity to develop independent living skills. Job Description: Direct Support Professionals assists individuals with disabilities in the successful completion of Activities of Daily Living (ADL’s) by teaching functional skills to be used in their day-to-day. Direct Support Professionals will also promote community integration by accompanying the program participants on recreational outings with the goal to improve socialization and communication skills. Direct Support Professionals should take an individualized approach when serving the program participants, complying with the agency’s mission and vision to provide person-centered care. Direct Support Professionals are to present themselves in a professional manner while providing an effective environment for participants to complete their day-to-day tasks and responsibilities in the program. Direct Support Professionals are to report to the Program Director and are expected to complete the tasks on their job description plus anything additionally asked of them by their supervisors. All Direct Support Professionals, while employed or thereafter, must comply with any and all investigations involving DDD, OOL, DHS, and/or APS. This is an entry-level position, ideal for professionals starting their career in the human services field or for anyone who wants to make a difference in the lives of the amazing individuals get to work with every day. Responsibilities and Duties · Follow the Participant’s Individualized Service Plan to assure that their daily activities align with their individualized goals and implement programs created to use with individuals, based on their specific needs · Adhere to the agency’s incident reporting policies and procedures and report all incidents per state mandate · Contribute to client’s individualized plan of care with the opportunity to help them function most efficiently in the community and grow in the work field · Complete all necessary pieces of training required to successfully complete job duties, their job role within the allotted training time frames mandated by the DDD Guidelines · Maintain a clean and organized workspace while maintaining an open line of communication with supervisors and co-workers · Create and implement programming to use with individuals, based on their specific needs · Ability to collect data from clients and input it in our online system daily · Establish positive relationships with the individuals being served, as well as their family members and/or caregivers and guardians · Adhere to the agency’s confidentiality policy, as per HIPAA mandate · Must be able to administer medications, and complete ongoing training to remain certified · Must have a reliable means of transportation to and from work in order to adhere to the agency’s attendance policy Qualifications · High School Diploma or GED required. College degree in the field of human services (or related fields) preferred · RBT Certification preferred · Experience in the social service field serving the intellectually disabled population preferred · Strong communication skills, awareness of advocacy needs, empathetic towards others, strong willingness to learn, concrete boundaries, and reliable · Basic timekeeping, reading, math, and computer skills are required · For Staff required to drive: Valid NJ Driver’s License; must be 18+ and clean driving record, with little or no points. Reliable means of transportation and proof of insurance. · Able to drive a company van while abiding by all NJ Motor Vehicles driving requirements (not to exceed 5 points for staff who are required to drive)Valid NJ Driver’s License; must be 18+ · Valid NJ Driver’s License; must be 18+ · Required to pass a background check, drug test, TB test and record verification. Complete fingerprinting process prior to hire as well as any other requirements mandated by the DDD. · The ability to climb stairs, check under furniture at floor level, and lift up to 50 pounds is required · The physical ability to assist in lifting may be required Job Type: We have full time, part-time and on-call substitute opportunities available. Salary: $12 to $15/hour depending on education and experience. Location: we are located in Little Ferry, NJ and in Ramsey, NJ. Ability to work in both locations desired

Job Description Spectrum Painting in Pompton Lakes, NJ is actively seeking a detail-oriented full-time Skilled Laborer - Painter to properly complete various paint jobs through prepping, application, clean up, and effectively using ladders and paint materials. Does beginning a career in the paint industry excite you? Are you self-motivated and goal-oriented? Do you have the desire to work with a company that values and respects you? If yes, read on about this job! This paint tech position earns a top pay of $21.00 - $29,00 an hour, based on skills and experience. We provide benefits, including health insurance, paid time off and a 401(k) plan. Additionally, we offer our Skilled Laborer - Painter paid training, retirement plans, bonuses, overtime/time and half, and advancement opportunities. If this sounds like the right paint tech opportunity for you, apply today! ABOUT SPECTRUM PAINTING Spectrum Painting is a full-service painting company in Pompton Lakes, New Jersey that provides valuable, high-quality interior and exterior painting services and concrete coatings to the needs of home and business owners. We're passionate about turning a house into a home. The needs of our clientele are always first priority with quality and sustainable materials that are everlasting, and a courteous service that is forever remembered. Our employees are all equally valuable and we ensure recognition and appreciation for the joint skyrocketing success that takes place. For their hard work and dedication, we provide thriving benefits and a supportive company culture. SKILLED LABORER - PAINTER QUALIFICATIONS • Valid driver's license and transportation, • At least 1 year of experience, • Able to learn quickly, • Active listening skills, • Willing to grow, • Must comply with our policies, including a tobacco-free work environment ARE YOU READY TO JOIN OUR PAINT TECH TEAM? If you feel you'll be perfect as our Skilled Laborer - Painter, apply now using our initial 3-minute, mobile-friendly application. Location: 07442 We are not affiliated with Spectrum Painting in NY. Job Posted by ApplicantPro

Job Description Summary: The Apprentice Moldmaker is responsible for learning various mold-making operations including precision milling, grinding, sinker EDM, wire EDM, assembly, and troubleshooting of high precision injection molds. Essential Duties and Responsibilities: • Proactive team member working directly with experienced mold makers, • Safely operate all types of toolroom equipment required to manufacture mold components, • Troubleshoot and repair plastic injection molds., • Maintain the organization of the mold shop. Competency: To perform the job successfully, an individual should demonstrate the following competencies: Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem-solving situations; Uses reason even when dealing with emotional topics. Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. Interpersonal - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things. Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions Team Work - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed; Recognizes accomplishments of other team members. Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information. Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values. Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time; Supports organization's goals and values; Benefits organization through outside activities; Supports affirmative action and respects diversity. Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time. Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan. Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. Judgment - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions. Motivation - Sets and achieves challenging goals; Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence; Takes calculated risks to accomplish goals. Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Quantity - Meets productivity standards; Completes work in a timely manner; Strives to increase productivity; Works quickly. Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below represent the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High School Diploma or equivalent. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Math Ability: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra, trigonometry, and geometry. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Microsoft Windows/Office, Mastercam, Solidworks Certificates and Licenses: No certifications needed Supervisory Responsibilities: This job has no supervisory responsibilities. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts; fumes or airborne particles, and the risk of electrical shock. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • The employee must occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this job include Close vision, Distance vision, and Peripheral vision., • While performing the duties of this job, the employee is occasionally required to stand, walk, sit, use hands to finger, handle, or feel, reach with hands and arms, stoop, kneel, crouch, or crawl, and talk or hear. Company DescriptionOur company is a leader in the manufacturing industry, specializing in high-quality products with a focus on precision, innovation, and sustainability. We take pride in our state-of-the-art facilities and advanced manufacturing techniques, including cutting-edge injection molding processes that set us apart from the competition. What makes us a great place to work? We believe in investing in our employees by offering continuous training and professional development opportunities. Our team-oriented culture fosters collaboration and creativity, and we prioritize safety and well-being in every aspect of our operations. With competitive pay, benefits, and a clear path for career advancement, we provide an environment where your hard work and ideas are valued. At our company, you won’t just have a job—you’ll have the opportunity to build a fulfilling career.Our company is a leader in the manufacturing industry, specializing in high-quality products with a focus on precision, innovation, and sustainability. We take pride in our state-of-the-art facilities and advanced manufacturing techniques, including cutting-edge injection molding processes that set us apart from the competition.\r\n\r\nWhat makes us a great place to work? We believe in investing in our employees by offering continuous training and professional development opportunities. Our team-oriented culture fosters collaboration and creativity, and we prioritize safety and well-being in every aspect of our operations. With competitive pay, benefits, and a clear path for career advancement, we provide an environment where your hard work and ideas are valued. At our company, you won’t just have a job—you’ll have the opportunity to build a fulfilling career.

Why Us? We want the best and brightest people to help us achieve our mission to develop and deliver life-enhancing products through focused execution. Our nearly 3,000 global team members understand the important role we play in delivering healthcare and are dedicated to supporting each other as we work to bring the best treatments forward. Our shared values of Integrity & Quality, Innovation, Drive, Collaboration and Empathy guide our team and enable us to deliver upon our vision of helping everyone we serve live their best life. Job Description Summary The Commercial Counsel - Customer Contracts provides timely legal counsel on commercial matters including contract management matters for the U.S. Sterile Injectable and Generics business unit. This Attorney will strategically and efficiently lead, coordinate, facilitate and manage contract requests across these two business segments, which shall include the preparation and negotiation of commercial agreements including numerous customer agreements. The role will manage adherence to the Endo contract management process, including utilization of the Legal Department’s contract management tool. In addition to providing contract support, the position will provide commercial and regulatory counsel and support on commercial initiatives and promotional labeling through the MARC review process. All incumbents are responsible for following applicable Division & Company policies and procedures. Job Description Accountability Responsibilities % of Time Contract Management • Independently consult, advise, and represent the Company on a variety of highly complex contractual legal matters, particularly customer agreements, for the sterile injectable and generics and business units., • Act as advisor of commercial contract management processes, with strong project management skills, legal analysis, quality standards, and strong understanding of contract terms based on client need and business objectives., • Provide legal advice and counsel to business colleagues to assist the Company in managing risk with respect to contract-related matters Business Unit Counsel • Provides legal advice and counsel to business colleagues in the Sterile Injectables and Generics Business Unit to assist the Company in managing risk with respect to regulatory compliance of commercial initiatives and promotional labeling through the Company’s MARC review process for the sterile injectable and generics business units. Special Projects • Assist with development and or creation of policies, standards, and procedures for contract management., • Assist with other special projects as assigned, • Juris Doctor degree from an accredited law school required., • Bar admission in New Jersey and Pennsylvania preferred., • Minimum eight years senior level experience with customer contracting at law firms, corporate legal departments, or other service providers required., • Previous attorney position at law firm, corporate legal department or other relevant service provider., • A deep understanding of pharmaceutical contracting across various commercial business segments, including generics, government and hospital-based contracts as well as corporate support areas (e.g., Finance, IT, etc.)., • Understanding of laws and regulations applicable to pharmaceutical marketing and commercialization for the sterile injectable and generics business units., • Understanding of contracts management programs and requirements., • Demonstrated success in the management of multiple projects ranging in size and scope, with an emphasis on larger more complicated matters., • Ability to operate independently while providing legal counsel and guidance in fast paced fluctuating environment., • Good research skills with an ability to analyze and interpret complex information., • Strong written and negotiation skills., • Effective verbal and written communication skills supporting interaction with various levels of employees and management (e.g. diplomacy, advocacy and “active” listening skills)., • Excellent client relationship skills, which include the ability to proactively manage client expectations., • Excellent judgment and ability to make concrete recommendations., • Leadership abilities coupled with strong personal accountability and initiative., • Ability to multitask under pressure., • Excellent organizational, planning, prioritization and problem-solving skills., • Customer service demeanor; approachable, respectful and polite., • Ability to build and maintain effective working relationships, both within the Company and with outside suppliers., • Superior technical communication skills., • Flexibility in unanticipated situations., • Ability to own tasks from start to finish with limited supervision., • Expert level PC user with deep familiarity utilizing Microsoft Office Suite. EEO Statement: We firmly believe in the principles of equal employment opportunity and strive to create an atmosphere where all employees, regardless of their race, color, creed, religion, sex, gender identity or expression, sexual orientation, national origin, genetics, disability (including pregnancy), age, or military or veteran status, feel valued, respected, and empowered. Our commitment to EEO extends to every aspect of employment, including recruitment, hiring, training, promotions, compensation, benefits, transfers, terminations, and all other employment practices. We are dedicated to ensuring that all employment decisions are based on qualifications, skills, and merit.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: Accounts Recievable Supervisor We are seeking an experienced Accounts Recievable Supervisor who will be responsible for 10 collections representatives. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Under the direction of the Corporate Credit Manager, monitors Accounts Receivable aging and identifies/resolves past due accounts., • Supports team with escalated calls., • Run, approve, or deny credit applications., • Assist in managing day to day operations of a collections call center environment., • Making sure collectors adhere to company policy and procedures., • Negotiating payment arrangements with delinquent customers and handling complex cases, • Responsible for collection calls on top revenue accounts., • Responsible for projects and special tasks as assigned., • Manage automated calls and text messages., • Create monthly statements, dunning letters., • Review and assess customer accounts for 3rd party collection agencies., • Process credit card, ACH payments., • Conduct agents call monitoring and evaluations. Provide constructive feedback and coaching., • Create, update, and review procedural manuals for department., • Research and processes charge backs, returns, and NSF items., • Process writes offs for AR reserve monthly., • Collaborate with the billing and sales teams for collections follow-up., • Identify and solve problems in processes to bring concrete results., • Develop alternative solutions and meet deadlines in a fast-paced environment., • Prepare monthly reports and analysis on the status of credit and collection matters and meet with assigned partners to review and strategize. Requirements and Qualifications::, • 3+ years supervisory experience with the ability to successfully manage and train staff., • 4-5 years of collections and customer service experience, • Strong communication and interpersonal skills, both written and verbal, • Strong analytical skills with the ability to simultaneously balance multiple tasks/projects, prioritize tasks and adhere to deadlines., • Commercial debt collections experience, • Automated Collections applications experience (Billtrust, High Radius, Oracle Collections Strategy, etc.), • Excellent computer skills (MS Word, MS Excel, MS PowerPoint), • Team leader to motivate, empower and inspire others. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $70,000.00/Yr. Salary Range Maximum: USD $80,000.00/Yr.

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Responsibilities Utilizes a quality customer service orientation, receives payment from customers for parking services and facilitates the flow of traffic through the gate by performing the following duties: • Responsible for being at work every scheduled day, on time and in uniform., • Counts “bank” of revenue at beginning of shift to ensure starting total is correct., • Collects cash and/or validations and maintains security of cash., • Makes change and issues receipts or tickets to customer for each transaction., • Computes or recomputes bill from ticket showing amount due per customer., • Operates cash register after time calculation (manually or by machine), calculates cost or transaction and displays cost of customer transaction on cash register., • Quotes prices for parking services for which money is received upon customer receipt., • Gives directions to customers to various locations in the city., • Completes lost ticket forms when original tickets cannot be located., • Resolves customer complaints independently or with the aid of a supervisor., • Answers telephone in a prompt and courteous manner., • Maintains cleanliness of booth and picks up trash in the surrounding area., • Conducts timely checks to see if a proper inventory of necessary work aids and supplies are located in booth., • Verifies log of shift transactions against bank of “revenue” on hand., • Compiles “bank” of collected revenue during the day once a predetermined amount of money has been collected., • Record amounts received, cars in/out of facility, cars left in a facility (if applicable) while preparing shift report of transactions., • Any other duties that may be assigned by the supervisor. Qualifications Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education and/or Experience: less than high school education or up to one month related experience or training or equivalent combination of education and experience. Availability to Work: Special shift requirements, if any, will vary depending on a location's hiring needs. If applicable, availability to work 2nd shift, 3rd shift and/or week-ends may be required. License Requirement: The employee will be required to have and maintain a valid state-issued driver’s license with a current address and acceptable driving record. Mathematical skills: ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to make change. Language skills: ability to read and comprehend simple instructions, short correspondence and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, supervisors and other employees of the organization. Reasoning ability: ability to apply common sense understanding to carry out detailed but standard written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Other skills and abilities: ability to use clock (standard/military time), calculator (optional) or credit card machine to handle transactions. Ability to maintain a pleasant and mannerly demeanor when speaking on the telephone and with the public. Ability to effectively respond to customer problems or complaints. Physical demands: the physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, use hands to finger, handle, or feel objects, tools, or controls and reach with hands and arms. The employee is occasionally required to walk and sit. Specific vision abilities required by this job include close vision. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact . We are here to assist you.

Responsibilities • Develops service plans with families in addition to providing a wide scope of clinical and concrete services, • Facilitates family consultations, family groups, assertive outreach, and engages families in community services, • Functions as an active team member by participating in program activities, communicating all consumer related information to peers, and leading groups with and without peers, • Must adhere to the program’s standard for ensuring all documentation is completed in a timely manner, • Operates the organization’s vehicles in a safe and professional manner Qualifications • BSW in social work, BA/BS in psychology, or a related field, • Two years of experience in mental health and human services, • Valid New Jersey driver’s license Shift • Hours between Monday and Friday, 9am - 5pm Pay: • $25.00 per hour

Job Description Providing Engineering and Manufacturing solutions since 1955, Triangle specializes in the precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement. Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a difference in people's lives. SUMMARY Responsible for meeting customer requirements of on-time delivery and quality through the effective operation of conventional and/or CNC equipment while adhering to the Quality Management System, all applicable regulations and company standards, and Lean Manufacturing Principles, and performing the following duties. 2nd Shift - 3:15 PM to 11:45 PM ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Understands job specifications and blueprints, as instructed. Independently operates conventional and CNC machining centers. Tests and inspects products during the manufacturing operation to determine if items meet specifications, complying with established standards and methods for inspection, testing, evaluation, and calibration. Understands and follows all written instructions as per tool sheets, inspection plans, etc., and accurately completes all required documentation at the time of the task, as well as provides required data for established metrics in the area. Examines defective machinery to determine problems and reports the need for machine repairs. Inspects and measures tools and equipment for defects and wear, and corrects damage. Recommends process improvements to TC or management. Completes all required documentation on a timely basis. Understands and complies with company policy, safety guidelines, quality system procedures, and housekeeping standards. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED) and 1-2 years CNC machinist experience. Mechanical inspection background. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to update job-related documentation. Ability to effectively present information one-on-one to other employees of the organization. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Triangle does not sponsor for employment visa status. Triangle is proud to be an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Powered by JazzHR 1ds4UGGAL7

Job DescriptionDescription: Company Description: Fly Alliance, LLC is a luxury private aviation group, specializing in private jet charter, jet card memberships, aircraft sales, management parts, and maintenance. The Company has two different brands including Fly Alliance Charter, which is an FAA Part 135 charter certificate operator, focusing on high quality service to customers in the areas of aircraft sales, management division is headquartered in Stuart, Florida with offices in Teterboro, NJ, Opa Locka, FL, Palm Beach, FL and Orlando, FL, focusing on high quality to customers in aircraft maintenance. Fly Alliance is growing which is giving us the opportunity to add to our amazing staff in Teterboro, NJ. Role Objective: • Maintain and repair airframes and related components, including flight controls, hydraulics, fuel systems, and mechanical components., • Conduct the disassembly of aircraft by removing components, cleaning/inspecting and properly tagging parts for inventory. Essential Job Tasks: • Perform aircraft maintenance, inspections and repair in accordance with regulations, manufacturer instructions and company policies., • Applies technical knowledge of aircraft systems to effectively troubleshoot and determine system and equipment malfunctions., • Maintains records in compliance with FAA and Company standards., • Maintains premises of the shop facility in a clean and organized manner., • Maintains equipment and tools in serviceable and working condition., • Assist other employees in the performance of their job assignments through coaching, counseling and guidance., • Performs many other duties as assigned Knowledge, Skills and Abilities: • Knowledge of Gulfstream G-IV, Challenger 604, Hawker 800/900XP, maintenance preferred., • Knowledge of aviation procedures/servicing/maintenance, • Adapt in workplace safety best practices, • Understanding of applicable FARs, • Knowledge of computers and electronic software applications, • Ability to effectively manage multiple tasks and priorities, • Must possess excellent communication and interpersonal skills including the ability to read, write and speak English. (Bi-lingual in Spanish is a plus), • Ability to work well as part of a team Minimum Qualifications: • FAA Airframe and Powerplant License with a minimum of 1 year of experience., • Excellent computer skills., • Must pass airport security background checks and travel for work as required., • Must have good organizational skills and ability to manage multiple priorities., • Must be able to read and write English and have good communication, writing, and problem-solving skills., • Must be able to pass DOT required pre-employment drug test. Work Conditions & Physical Requirements: • FAR Part 145 aircraft maintenance in a hangar and ramp environment, • The employee must occasionally lift and/or move up to 50 pounds, • Good vision and depth perception, • Availability during nights, weekends, & holidays as needed Travel: • Minimal travel is required Required Education/Experience: • FAA A&P license required, • 3-5 years proven experience in a similar position, • High School diploma or GED, • Has no certificate action since the date of the interview, • Has no misdemeanors or felonies since the interview date LANGUAGE SKILLS • Ability to read, analyze, interpret and understand technical procedures and governmental regulations, sometimes quickly and under stressful or emergency situations., • Able to effectively present information to and respond to questions from management, dispatch, crew, air traffic control, and the general public., • Able to speak and be understood in English, including shouted verbal commands during emergency situations. REASONING/PROBLEM SOLVING ABILITY • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Capable of interpreting a variety of multiple instructions furnished in written, oral, diagram, or schedule form., • Must be able to remain calm, think and react quickly in all types of emergency situations. DECISION MAKING & IMPACT OF ERRORS • Makes decisions to support strategic direction., • Decisions tend to be medium range and of medium significance with moderate consequences, but may in unusual situations be significant and have safety-of-flight consequences., • Decisions could require additional expenditure of resources if not sound and may impact safety., • Able to process information quickly and react in a positive manner during unexpected and/or serious situations., • Capable of controlling personal and emotional responses and acting appropriately under high levels of stress. Direct Reports: • This role has no direct reports. Work Authorization: • Must be authorized to work in the U.S. and be at least 21 years of age by 1/1/20. Compensation: • Pay based on experience, • Medical including Health, Dental and Vision, • Short-Term and Long-Term Disability Insurance, • Paid Holidays, • Paid Vacation, • 401K – After 6 Months of Service, • Profit Share ProgramRequirements:

Job DescriptionBuild with purpose Join the team on Daniel Road that turns engineering intent into reliable, tested hardware. In this Mechanical Assembly role, you’ll execute final assembly, finishing, and testing so every deliverable aligns with drawings, specs, and customer quality standards. Your impact • Prepare threaded inserts: install/remove Heli-Coils to spec., • Assemble and align components to create chambers and complete mechanical assemblies for test., • Investigate fit or function issues and drive resolution., • Complete customer-defined cleaning/finishing procedures., • Inspect work-in-progress, verify conformance, and escalate any damage immediately., • Close the loop before release: ensure all assembly, finishing, and test steps are complete for sign-off., • Partner with engineering, production, and QA to achieve customer satisfaction.Qualifications & experience, • High school diploma or GED required., • Hands-on mechanical experience with vehicles, small engines, or bodywork., • 3–5 years of mechanical assembly experience is a plus., • Proficiency reading engineering drawings/specifications and deriving product and quality criteria., • Fluent English communication (reading, writing, speaking).Professional competencies, • Language: Comfortable interpreting technical procedures, journals, business publications, and regulations; able to write reports, business correspondence, and procedures; effective presenting to supervisors, managers, clients, and the public., • Mathematics: Knowledge of probability, basic statistical ideas, plane/solid geometry, and trigonometry; capable of using fractions, percentages, ratios, and proportions on the job., • Analytical reasoning: Skilled at defining problems, collecting data, establishing facts, and drawing valid conclusions; able to follow complex written, verbal, diagrammatic, or scheduled instructions and juggle abstract and concrete variables.Must-have fundamentals, • Mechanical aptitude and craftsmanship., • Hands-on experience with common hand tools., • Entry-level blueprint reading. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Physical demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to reach with hands and arms; and talk or hear. The employee is regularly required to stand; walk; sit; and use hands or fingers, handle or feel. The employee is frequently required to stand and work, lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, color vision and the ability to adjust focus. Work environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate and sometimes loud.

Job Description We are looking for a dedicated and responsible individual with minimum of 1 year of drilling experience. Drilling license not mandatory however will be needed in the future. Training can be offered if needed. This position calls for the application and knowledge of geotechnical drilling principles and practices in broad areas of assignments and related fields. It requires independent decision making on geotechnical drilling problems and methods. Job Roles and Responsibilities: Mobilization in setting up drill sites, driving drill rigs, cranes and tractor trailers to project sites. Fueling, greasing, and maintaining equipment. Minor mechanic skills needed. (Changing oil, fuel filter, and changing hydraulic hoses) Setting up drill sites, checking layout, checking drill for plumb, and measure offsets to confirm hole location Rigging and setting casings and rebar cages plumb and on surveyed hole location Mixing and using polymer drilling slurry/operating in house tanker vac trucks Assembling and installing concrete form work under drillers supervision Assisting concrete pours and setting anchor bolts to spec Using transits to set elevations and anchor bolts to spec Prepare daily drilling log reports Be willing to work in adverse weather conditions Company DescriptionOur Company has been operating in the wonderful state of NJ for over 40 years. We are looking for a great candidate to join our team.Our Company has been operating in the wonderful state of NJ for over 40 years. We are looking for a great candidate to join our team.

Job Description At Spectrum Painting LLC, we don't just paint walls-we transform spaces with precision and care. If you're an experienced painter with leadership skills, we want you to take charge as our full-time Painting Crew Leader. Ready to take your painting career to the next level? Keep reading! THE BASICS Pay: This full-time role offers $30 - $35 per hour, fantastic benefits, and the opportunity to lead a hardworking team while delivering high-quality results. Schedule: As a full-time Painting Crew Leader, your schedule will vary based on project needs. While specific shift times are not set, you can expect a consistent workload managing multiple job sites throughout the week. Benefits: We provide health insurance, paid time off (PTO), and a 401(k) plan. Additionally, we offer paid training, retirement plans, bonuses, overtime/time and half, and advancement opportunities. YOUR DAY AS A PAINTING CREW LEADER Each day, you will arrive on-site ready to lead your team to success. You will ensure that all new hires receive proper training, setting them up for success in the field. You will oversee Field Training, making sure it's completed efficiently and correctly. Keeping a close eye on job progress, you will monitor crew performance and make necessary adjustments to bring projects in on time and within budget. Your role will also involve keeping detailed records of attendance and performance evaluations and maintaining accurate time tracking and documentation. You will ensure that all company MSDS Books, fire extinguishers, and first aid kits are present in company vans and that job site signs are properly placed and removed when projects wrap up. Managing materials, resolving customer questions, and communicating concerns to the Owner and Supervisor will be part of your daily routine. Most importantly, you will ensure full payment is received on the last day of the job, collect customer signatures on Quality Assurance Forms, and gather valuable customer feedback surveys to help us continue delivering top-notch service. REQUIREMENTS FOR A PAINTING CREW LEADER • Strong understanding of job-site safety, • Extensive knowledge of painting products and techniques, • Ability to accurately document daily activities, • Leadership skills to manage painters and oversee job completion, • Excellent communication and customer service abilities, • Attention to detail when tracking job progress, materials, and crew performance A LITTLE ABOUT US: Spectrum Painting is a full-service painting company in Pompton Lakes, New Jersey that provides valuable, high-quality interior and exterior painting services and concrete coatings to the needs of home and business owners. We're passionate about turning a house into a home. The needs of our clientele are always first priority with quality and sustainable materials that are everlasting, and a courteous service that is forever remembered. Our employees are all equally valuable and we ensure recognition and appreciation for the joint skyrocketing success that takes place. For their hard work and dedication, we provide benefits and a supportive company culture. WE CAN'T WAIT TO HEAR FROM YOU! Take the next step in your career and lead a team that takes pride in their work. Our initial 3-minute, mobile-friendly application makes it quick and easy to apply. Don't miss this opportunity-apply today and start painting your future with us! Job Posted by ApplicantPro

Job DescriptionWe are hiring a Structural Engineer with 36 years of experience to lead the analysis, design, and documentation of structural systems for a variety of building and infrastructure projects. The role requires strong technical capabilities, coordination skills, and the ability to manage project tasks with minimal oversight. Responsibilities: • Perform structural analysis and design of steel, concrete, wood, and masonry structures., • Develop engineering reports, calculations, and construction documents., • Review shop drawings, RFIs, and submittals during construction., • Collaborate with architects, contractors, and clients to ensure design intent is met., • Support junior engineers and participate in QA/QC processes. Applicant must be a NJ/NY Permanent Resident who has their own transportation to Lyndhurst on a daily basis.

Exhibits general knowledge of brick and stone masonry construction, repair using mortar mixes, plastering, and concrete method.

Develops service plans with families in addition to providing a wide scope of clinical and concrete services.Facilitates family consultations, family groups, assertive outreach, and engages families in community services.Functions as an active team member by participating in program activities, comm

Superintendent Of Construction. Manage multiple construction projects simultaneously from start to finish. Extensive experience in concrete repair and construction management.

Responsibilities will include construction administration and inspection for municipal and county infrastructure projects, utility installations, water and sewer, concrete work, roadway reconstruction, site development, grading and drainage structures. T&M Associates has a fantastic opportunity

Superintendent Of Construction. Manage multiple construction projects simultaneously from start to finish. Extensive experience in concrete repair and construction management.

Job DescriptionPosition Summary: Under the direction of the Player Development Manager, the incumbent handles all informational inquiries, TVG withdrawals/deposits, Sportsbook withdrawals/deposits and overall management of the Players Club desk while maintaining the highest level of customer service. Incumbent handles all VIP player requests, assisting the Player Development Manager when needed. Assist Mutuels Manager with simulcasting/program files when needed. Essential Duties And Responsibilities: • Responsible for signing up new members to our players rewards program, • Assist guests with all service related issues with the players rewards program; i.e. lost cards, damaged cards, • Assist guest with learning how to use our self-service wagering terminals, • Serve as liaison between the Players Club Department and all other departments that service the guest, • Respond to all guest inquiries, • Handle TVG withdrawals/deposits and ensure balancing at end of shift, • Handle Points Bet Window withdrawals/deposits and ensure balancing at end of shift, • Secure assistance from Security to manage guests’ issues, especially regarding safety concerns, • Secure assistance from Tote vendor to manage guests’ issues, especially concerning wagering issues arising from ineffective betting apparatus; i.e. self-service machines ticket jams, machines out of paper, etc., • Assist Marketing with nightly promotions including t-shirt toss, Horseplay, drawings, competitions and events., • Disseminates hand-held betting machines to guests upon request, • Process Cash Advance/Check cashing, • Is well informed on all activities and promotions Education And/Or Experience: High school diploma or GED required. Bachelor’s degree from a four year college preferred Gaming License Required Special Qualifications: • Must possess effective communication and organizational skills., • Must be an independent, decision-maker and problem solver, with the ability to handle multiple tasks with ease., • Must have tolerance for loud noise., • Proficient in Microsoft Word, Excel and the Internet Language Skills: Ability to read and understand financial reports, policy and procedure manuals, and technical instructions. Ability to respond to common inquiries or complaints. Ability to speak effectively before groups of Guest or Associates of the organization. Mathematical Skills: Ability to work with mathematical concepts such as probability and statistical inference. Ability to apply concepts such as factions, percentages, ratios, and proportions to practical situations. Ability to read player ratings. Reasoning Ability: Ability to apply commonsense understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving several concrete variables. Must have a high level of independent problem solving. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the Associate is regularly required to talk or hear. The Associate is also regularly required to stand, walk, sit, and use hands to finger, handle, or feel objects, tools or controls. The Associate is occasionally required to reach with hands and arms, and to sit, climb or balance, and stoop, kneel, crouch or crawl. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate.

Responsibilities of essential functions include: • Receive, unpack, and verify count of products and condition of receipt, • Inspect incoming materials and finished goods to technical drawings or product specifications by performing dimensional measurements, function tests and pattern assessments, • Document inspection results by inputting data into quality database, completing forms and logs, summarizing inspection findings and rejecting non-conforming material, • Laser mark and electro chemical etch, neutralize and clean products, • Process product returns and complaints, including evaluation of quality issues and initiating repairs or reworks as needed, • Ensure the company's products comply with all FDA regulations, prepare submissions and maintain regulatory databases, • Adhere strictly to all CGMP, FDA 21 CFR820, ISO 13485, EU MDR and company procedures to ensure the quality and integrity of the products and safety of the workplace, • Keep Quality area organized and clean, • Keep stock of Quality materials such as tip protectors, test materials, etc., • Conduct training on receiving and inspections and orientation for new hires, • Maintain commitment to Quality Goals and Quality Policy, • Complete jobs and tasks as assigned, • Must be able to work in a team environment, • Work Schedule: Monday - Friday, 8hrs/day. Scheduled arrival & departure time is flexible and determined upon hire. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: • High School diploma or equivalent, • Requires great attention to detail and the ability to read drawings and specifications, • Experience using calipers and micrometers Language Skills: • Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Reasoning Ability: • Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Physical Demands: • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to finger, handle or feel objects, tools or controls., • The employee frequently is required to talk and hear and occasionally to reach with hands and arms and stoop, kneel, crouch, or crawl., • Must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and the ability to adjust focus. Work Environment: • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually moderate to loud. Competencies: • Attendance/Punctuality - Is consistently at work and on time., • Dependability - Follows instructions, responds to management direction., • Quality - Demonstrates accuracy and thoroughness; monitors own work to ensure quality., • Safety and Security - Observes safety and security procedures; reports potentially unsafe conditions; uses equipment and materials properly. ADDITIONAL NOTES ARCH Global Precision is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ARCH Global Precision are employed on an at-will basis. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

Job Description Triad Service Center is seeking a qualified Field Equipment Installer for a variety of light industrial equipment based out of the Patterson, NJ area. Installed equipment can vary and could include restaurant grease containment units, checkout lanes, bike/clothing racking, and other customer equipment found in large retail / industrial locations. This position will utilize a company vehicle regionally and therefore require a valid, good standing driver’s license. The position would be primarily Monday-Friday, averaging 40 hours a week. Vehicle, tablet, cell phone, PAID TRAINING provided. DUTIES, TASKS AND RESPONSIBILITIES • Responsible for providing outstanding CUSTOMER SERVICE., • Unpacks, catalogs and confirms parts and pieces are accounted for, • Installs new equipment in location designated by customer., • Realigns and adjusts components such as spindles and clutches., • Installs and repairs electronic components of machinery of equipment., • Start machines and equipment to test operations following repair., • Drills through concrete and building walls, • Responsible for record keeping and reporting of work orders, parts, supplies ordering, and following a daily agenda., • Travel involving overnight lodging may be required, • Treats company equipment (i.e. vehicle, tools, phone, tablet, credit card, and parts) as if they were their own and follows maintenance guidelines on company provided vehicle., • Performs additional duties, tasks, responsibilities, as a supervisor may, from time to time, deem necessary. TECHNICAL REQUIREMENTS AND QUALIFICATIONS EDUCATION and/or EXPERIENCE • High school diploma or general education degree (GED); good mechanical aptitude/skills., • Self-starter with entrepreneurial spirit who operates business within the framework of each customer’s business structure., • Good driving record., • Ability to read, write, and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Excellent time-management skills. LANGUAGE SKILLS • Possesses excellent communication skills; both verbal and written with ability to communicate effectively to customers. REASONING ABILITY • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. OTHER SKILLS & ABILITIES • Detail oriented, • Excellent listener, • Skilled in the use of hand and mechanical tools, • Owns or can purchase or borrow basic standard and metric mechanical tools, gear puller, and three-drawer tool chest, • Quality – Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; monitors own work to ensure quality, • Safety and Security – Observes safety and security procedures; reports potentially unsafe conditions; uses equipment and materials properly, • Dependability - Excellent attendance. Responds to service request in a timely manner. Follows instructions, responds to management direction. Takes responsibility for own actions. Maintain a valid driver’s license and safe driving skills. Must always meet state and federal regulations. PHYSICAL DEMANDS • While performing the duties of this job, the associate is occasionally required to drive long hours., • The associate is regularly required to sit; use hands to finger, handle or feel; reach with hands and arms; stoop, kneel or crouch; talk or hear and taste or smell., • The associate must regularly lift and/or move up to 10 to 50 pounds and frequently lift and/or move up to 100 pounds., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT • Travel up to an average of 300 miles per day, • Frequent exposure to moving mechanical parts, risk of electrical shock, fumes or airborne particles, and toxic or caustic chemicals. MISCELLANEOUS • Typically, Monday through Friday. Weekends and after hour work is possible provided customer is willing to pay emergency rates. On call status ends at 11 am EST on weekends and holidays As this is a mobile position, our Field Equipment Installer can be based out of many cities around the Paterson NJ area. Find out more: Powered by JazzHR 2oDAYELH1E

Job DescriptionSUMMARY Duties of the packer position include operating the packer to fill bags of product, operating the sewing machines to seal bags, operating and adjusting bag top formers, operating palletizers, operating ink jet printers and Label Machines. The position of packer is responsible for weights of bags, sealing of bags, coding of bags, correct labeling of product, checking to be sure the correct bags are being packed, volume of output and keeping work area neat and clean. Packers may be assigned other duties as needed by the supervisor. FOOD SAFETY/SECURITY REQUIREMENTS The Company is committed to producing and delivering defect-free products. • To ensure this, all employees are required to be trained on and adhere to the “Good Manufacturing Policies” set forth by the Company as they pertain to personnel practices, equipment, and facilities., • It is also vital that all employees be aware of their work environment to prevent any accidental or intentional adulteration of products produced at the facility. SAFETY • While performing the essential job functions, the employee is expected to work in a safe manner and follow company policies regarding safety., • It is the expectation and responsibility of the employee to work safely and report any and all injuries immediately to their supervisor and to report any safety situation that the employee feels is substandard and poses a risk for employee injury, property damage, or loss. TEAMWORK • Ensures that appropriate individuals are informed about matters impacting their areas of responsibility; works well with others; shares knowledge and experience with others; demonstrates respect and consideration for others’ opinions; contributes to the overall task of the team., • Demonstrates integrity; works effectively in teams; facilitates inter-departmental cooperation; cooperates with supervisors and peers to accomplish work assignments; helps create and maintain effective working relationships. DEPENDABILITY • Follows through on tasks; requires minimum supervision and follows instructions and procedures. Arrives at work on time; follows company policies including vacations and leaves. Observes Company rules; completes tasks within deadlines. QUALIFICATIONS To perform the job of packer successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Needs to be able to communicate both verbally and in writing in English., • Needs to be able to perform basic math functions, with or without the aid of a calculator., • Needs to be capable of learning to perform computer entry., • Needs to be an independent worker with self-initiative to carry out job functions., • Must be willing to rotate shifts to cover absences if required. EDUCATIONAL REQUIREMENTS • Possess a high school diploma or equivalent (GED). Possess strong analytical skills., • Must be willing to learn the Company’s DBC computer system. LANGUAGE SKILLS • Must be capable of communicating and following written and verbal instructions. Must be able to read safety rules, operating and maintenance instructions, technical procedures. MATHEMATICAL SKILLS • Capable of performing basic math functions, with or without the aid of a calculator. Ability to work with mathematical concepts and apply concepts such as addition, subtraction, multiplication, division, fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY • Ability to define and solve problems collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables at any given time., • Ability to apply common sense understanding to carry out training instructions furnished in written, oral, or diagram form. PHYSCIAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to work in an environment which has extremes in temperature., • Be able to climb ladders., • Must have physical dexterity to perform basic repair functions., • Be able to stand for extended periods of time., • Frequently required to bend, stoop, kneel, crouch or crawl., • Constantly required to twist torso., • Frequently required to lift and or move 100-pound bags., • Vision requirements are close vision, distance vision, color vision and depth perception. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, and fumes or airborne particles. The employee is exposed to vibrations. The employee is occasionally exposed to high precarious places. The employee will be exposed to extremes in temperature, both hot and cold. The work environment is noisy, at times in excess of 100 decibels. FOOD SAFETY / SECURITY REQUIREMENTS: The Company is committed to producing and delivering defect-free products. To ensure this, all employees are required to be trained in and adhere to the Good Manufacturing Policies set forth by the Company as they pertain to personnel practices, equipment, and facilities. It is also vital that all employees be aware of the work environment and when possible, prevent accidental or intentional adulteration of products produced at this facility. As a result any employee has a right to put the product on hold if they have a concern. At the plant level, only the Quality Assurance Manager and General Manager have the authority to release products on hold.

Job DescriptionDescription: Our company, Apotheco Pharmacy, is searching for a Floating Pharmacist. Regular travel will be required between our satellite locations in Bergen,NJ, Woodland Park,NJ, Parsippany, NJ, and Jersey City, NJ. Will be provinding coverage over the weekends 10 am -2 pm. Salary is based on upon experience. The Pharmacist will oversee and provide direction related to quality, clinical and compliance for Apotheco Pharmacy operations initiatives in compliance with state and federal laws. The Pharmacist will report to the Pharmacist-in-Charge. Must have excellent customer service skills and be detailed oriented. Work with Pharmacist-in-Charge to maintain and increase efficiency, quality, and customer service levels in the daily operation, as well as execute on department goals. Continue performing essential pharmacist functions of a staff pharmacist. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Duties and Responsibilities: They include the following; other duties may be assigned; 1. Manage staff of techs, patient care coordinators, and customer service representatives while on duty., 2. Adheres to all Apotheco policies., 3. Adheres to all applicable laws pertaining to the practice of pharmacy., 4. Maintains a safe and clean pharmacy by complying with procedures, rules, and regulations designated by the Board of Pharmacy., 5. Maintains records by recording and filing physicians' orders and prescriptions., 6. Responsible for all cash transactions and depositing of all transactions., 7. Ensures medication availability by delivering medications to patients and departments., 8. Contributes to team effort by accomplishing related results as needed., 9. Knowledge of medication and dosage measurements., 10. Proficient at pharmacy software system and electronic ordering of all medications., 11. Perform final check on prescriptions annotating on the prescription and scanning in changes, 12. Call physicians when applicable for refills, medication changes, and prior authorizations., 13. Making sure all drugs have a minimum of 6 months prior to expiration, 14. Perform return to stock duties for prescriptions not picked up within 14 days, 15. Counsel patients on all new prescriptions, 16. Pharmacist responsible for ensuring overall compliance with state and federal statutes., 17. Responsible for adherence in state environment, for all federal regulations involving prescription medication fulfillment for retail pharmacy., 18. Facilitate and monitor compliance with Prescription Drug Monitoring programs. 19. Oversee pharmacy team operations compliance (e.g. transferring prescriptions, handling inbound/outbound physician calls, efficient drug utilization management, safe dispensing, providing accurate and timely medication dispensing, & ensuring adherence and compliance with all state and federal regulations)., 19. Ensure quality and productivity standards are met and/or exceeded in a consistent basis., 20. Lead in communicating management of Pharmacy policy and procedures relevant to pharmacy compliance and quality standards; I. Facilitate implementation of new programs, enhancements. II. Maintain professional licensure, competence, knowledge and skills necessary to effectively complete responsibilities, enhance job knowledge and ability to actively pursue learning and self- development for you and your staff. III. Follows all policies and procedures relating to job responsibilities to meet corporate objectives. IV. CSOS ordering capability for site. Understanding how to order, file, and audit ordering C2 prescriptions electronically. V. Ensure Refrigeration logs are being filled out and monitored daily. Responsible for filing those logs electronically and in file cabinet. VI. PIC will be responsible for Alarm at site. PIC will have to be one of the people assigned on the alarm system or as assigned. VII. Recall of drugs responsible for returning drugs to wholesaler or direct vendor both legend and C2. Maintaining paperwork as required and contacting members when necessary. VIII. Expired drugs: responsible for determining procedures along with manager of fulfillment pertaining to disposal and credits of expired drugs. IX. Inventory: aid in the process of inventory validation as needed. X. Variances with inventory validate along with manager of inventory and finance any variances. XI. C2- all C2 prescriptions must be counted by a technician and then recounted by a pharmacist. C2 count one section per week or delegate to another pharmacist and record in controlled substance log. XII. Other activities as determined by management. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Math Ability: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft products. Information Security Expectations: While performing the duties of this job, the employee is required to abide by Apotheco information security policies, employee handbook and security and privacy regulatory requirements. Each employee is responsible for the secure and appropriate handling of Apotheco information, information received by customers, other companies and/or external parties. Knowledge, Skills, and Other Abilities: • Strong drug product and clinical pharmacy knowledge, • Familiar with clinical program components, formulary designs, prescription benefit trends, and PA programs, • Time management skills, • Written and Oral communication skills, • Demonstrated ability to handle confidential information appropriately, • Ability to work independently with minimal supervision and self-motivated, • Strong computer skills, including MS Window, Word, Outlook, and Excel, • Excellent interpersonal and problem-solving skills, • Ability to work in a fast-paced call center environment, • Strong team building and leadership skills, • Strong customer service orientation and commitment to professionalism The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to walk; sit and use hands. The employee is occasionally required to stand. Benefits: Paid Time Off, Paid Holidays, Medical/Dental/Vision benefits, Short Term Disability, 401k, and Life Insurance. Schedule: • Licensed Pharmacist- NJ Required, • NY Preferred - Will be required to get licensed in NY within 3 months of employment.

Structural steel and concrete repairs; and Waterproofing.

Substation Civil/Structural Engineer On-site role near Spring Valley, NY Salary Range: $89,000 – $106,000 About the Role We’re looking for a Substation Civil/Structural Engineer to play a key role in the design and development of critical electrical infrastructure projects.This role offers the o

Nice-to-Haves as the Concrete Foreman:. Opportunities to work on diverse concrete projects throughout Northern New Jersey. Trueline's is seeking an experienced Concrete Foreman to join their team in Newark, NJ, with projects across a 50-mile radius.

Traveling Superintendent: Data Center Construction.Manage all on-site construction activities for data center projects, ensuring compliance with plans and specifications.Coordinate with subcontractors, vendors, and consultants to maintain project schedules and quality.Oversee safety protocols and en

Are you looking for an opportunity to move your career forward with an established industry leader? Join our team at Ceco Concrete Construction! Founded in 1912, Ceco has more than 100 years of experience serving the commercial construction industry as a client-centric, single source solution for co

Civil Service Title: Cement Mason JOB DESCRIPTION: Prepares and sets forms, mixes and lays cement and concrete, screeds and finishes cement or concrete to grade and contour as required, operates small power equipment and tools.

I am working with a well-respected, firmly established Concrete Contractor seeking an experienced Concrete Estimator/Project Manager. URGENTLY SEEKING COMMERCIAL CONCRETE ESTIMATORS/PROJECT MANAGERS. Concrete Estimator/Project Manager Experience Required.

A GC with A LOT of room to grow is looking for a Lead Superintendent.This Jobot Job is hosted by: Brian Moriarty.Are you a fit? Easy Apply now by clicking the Apply button and sending us your resume.Salary: $150,000 - $175,000 per year.This role requires to travel to Boca and Miami.This is a 10 year

Requisition ID: [Requisition ID].

Commercial Construction Superintendent - Data Centers.Every day, our team members do amazing things in pursuit of our shared purpose to build trust with our clients, partners, subcontractors, and teammates.No matter your background, education, or career path, if you share our vision to create extrao

The Carpenter in a concrete construction company is responsible for building, erecting, and dismantling formwork and other structures used in concrete construction. Are you looking for an opportunity to move your career forward with an established industry leader? Join our team at Ceco Concrete Cons

Blackstone Infrastructure Associate.Blackstone is the world's largest alternative asset manager.We seek to create positive economic impact and long-term value for our investors, the companies we invest in, and the communities in which we work.We do this by using extraordinary people and flexible cap

Data Center Site Manager will be responsible for daily operations, maintenance, and upkeep of the primary data center in Piscataway, NJ.

The CE Operations Lead is responsible for overseeing day to day infrastructure operation, including maintenance.The primary focus and responsibility is the computer room(s) and critical infrastructure areas.Single point of contact between Supplier team and Data Center Operations organization for all

Job Title – Quality Assurance Specialist.Location – Lower Manhattan, NY.Duration – 3+ months with Possibility extension.Description of Work & Skills Desired:.Inspect each roof under warranty at least semiannually; and (2) coordinate with Property Management Staff to remove any debris from the

An Award Winning Environmental and Civil Engineering Firm is looking for a Senior level Civil Engineer to join their team.This Jobot Job is hosted by: Brian Perkins.Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Salary: $85,000 - $120,000 per year.We prov

Global Financial Firm located in Jersey City, NJ has an immediate contract for an experienced Data Center Consultant.Installing and un-installing hardware in the Data Center.Running UTP and fiber cables in the Data Center.Provide and maintain data cabling and associated documentation within the data

Equinix is the world's digital infrastructure company, shortening the path to connectivity to enable the innovations that enrich our work, life and planet.A place where bold ideas are welcomed, human connection is valued, and everyone has the opportunity to shape their future.Joining our operations

Equinix is the world's digital infrastructure company, shortening the path to connectivity to enable the innovations that enrich our work, life and planet.A place where bold ideas are welcomed, human connection is valued, and everyone has the opportunity to shape their future.Joining our operations

Family Law Associate - Premier Boutique Firm!.This Jobot Job is hosted by: Jacob Vane.Are you a fit? Easy Apply now by clicking the Apply button and sending us your resume.Salary: $150,000 - $225,000 per year.Based in San Francisco, CA, we are a Top Ranked Legal Services Firm known for our commitmen

This may include concrete tilt-wall forms, symon forms and/or structural forms for columns, decks, elevator cores, parking garages and other cast-in-place concrete structures. Build and/or assemble wood or metal forms for the construction of concrete floors, slabs, walls, columns, tilt-walls, elevat

At Jacobs we're continually challenging today to reinvent tomorrow, and we need an Asst Resident Engineer who also shares that same intent.By joining our team, we'll have you be responsible for managing a group of Field Engineers in monitoring the performance of the Contractor to assure compliance w