Concrete jobs in Fort Worth, TexasCreate job alerts

Job Description PRIMARY PURPOSE: • High school graduate or GED equivalent from an accredited institution (required), • Must have valid Texas Driver's license and satisfactory driving record, • General knowledge of commercial maintenance and carpentry, • Commercial Painting and Flooring Experience Preferred, • Mechanical Aptitude and ability to learn, • Maintain and repair District physical facilities and structures and complete programmed maintenance procedures, • Maintain all physical buildings and structures including concrete, flooring, drywall, acoustical ceilings, and commercial carpentry, as directed by department foreman, • Coordinate, organize and complete daily assignments, assuming responsibility for proper documentation regarding assigned tasks, works orders, and procurement of supplies, • Initiate work orders within assigned zones as needed, • Assume responsibility for daily directives as given by appropriate administrators, • Abide by all AISD policies, procedures, and safety guidelines, • Assume responsibility for care of assigned service vehicle, tools, and equipment, • Assume responsibility for personal timekeeping and communication and documentation of absences, • Perform all other duties as assigned to serve the needs of the District as determined by departmental leadership, • Indoor and outdoor work environment, • Exposure to extreme temperature ranges, • Significant walking, standing, climbing, lifting, bending, stooping and reaching, • Frequent district-wide travel in light duty pick-up truck

Job DescriptionIndustrial Maintenance Mechanic Searching for an Industrial Maintenance Mechanic for our plant located in Ft. Worth, TX. As an Industrial Maintenance Mechanic you’ll be responsible for the maintenance, repair, and troubleshooting of a wide variety of manufacturing equipment. The company is committed to and takes pride ourselves on providing reliable structures, superior service, and product solutions. This is an industry leader in the engineering design and fabrication of concrete, lattice, and tubular steel structures for transmission, distribution, and substation applications. Schedule- Mon-Fri 4pm-2:30am with occasional Saturdays as needed. What You’ll Do: • Determine causes of and solutions for operating problems in manufacturing machinery, electrical systems/components, plumbing systems, HVAC, carpentry, electrical fixtures/switches/power sources, and mechanical, hydraulic, and pneumatic equipment., • Use blueprints, schematics, small/power tools, and electronic test equipment to perform a variety of maintenance tasks., • Lay out, build, test, troubleshoot, repair, and modify production electronic components, parts, switch panels, electronic equipment, and systems, • Make electronic, mechanical, or electrical repairs on all computer-controlled equipment, • Follow all safety rules and practices, • May be involved in safety committees or initiatives What You’ll Need: • A certification or associate's degree in industrial maintenance, equivalent degree or certification, or a minimum of 2 years of relevant and applicable experience in a maintenance position in a heavy industrial manufacturing environment, • Be capable or troubleshooting PLC signal Inputs and Outputs to determine PLC faults, • Ability to read blueprints and schematics, • Experience with AccuPress, Kinetic, and/or Alltra machinery is highly preferred, but not required, • A high level of dependability, a great attitude, and an ability to work well with a team towards achieving a common goalPay is based on experience!! $25.00 to $35.00Send us your resume!!!!! #zrfw #vipstaffingFTW #google

Job Description PRIMARY PURPOSE: • High School diploma or equivalent from an accredited institution, • Four years commercial building maintenance experience., • Working knowledge of trade with background in maintenance of commercial facilities, • Experience also required in maintaining roofs, brick, bleachers, • Follow all AISD safety procedures as covered in AISD safety handbook, • Abide by all AISD policies and procedures as outlined in AISD auxiliary employee handbook, • Assume responsibility for safe operation and care of assigned service vehicle, tools and equipment, • Assume responsibility for personal time card, • Assume responsibility for maintenance and repair of all AISD physical facilities and structures, programmed maintenance procedures, and assigned zone, • Maintain all physical buildings and structures i.e.; carpet, tile, toilet partitions, sheetrock, brick, roofs, blinds, ceiling tile/grid as directed by department foreman, • Coordinate, organize and complete daily assignments assuming responsibility for proper documentation regarding assigned task, work orders and procurement of supplies, • Initiate work orders within assigned zones as needs are recognized by zone employee, • Coordinate, organize, complete daily tasks assuming responsibility for proper documentation for assigned work orders, • Assume responsibility for daily directives as given by appropriate administrators, • Assume all other duties as assigned to serve the needs as determined to be in the best interest of the AISD All of the following, associated with the building trade, but not limited to: • power tools, • drills, • saws, • hammer, • drills, • pneumatic and electric man lifts, • scaffolds, • ladders, • basic hand tools, • electronic test equipment, • trenchers PHYSICAL DEMANDS: • Continuous lifting, • climbing reaching, • Will work in, under, around, outside of all AISD facilities., • Work will be done within AISD zone concept., • Employee will be exposed to all atmospheres found in this region of Texas. Lift or carry • 01 - 10 lbs C, • 11 - 20 lbs C, • 21 - 40 lbs C, • 41 - 60 lbs C, • 61 - More lbs C, • Pushing C, • Bending/Stooping C, • Reaching above shoulder C, • Driving equipment F, • Ladders C, • Stairs C, • Ramps C, • Scaffolds O, • Walking C, • Sitting O

Job Description We are currently seeking an experienced DRYWALL TECHNICIAN to join our team in Dallas! You will be responsible for completing work orders and other required tasks. Responsibilities: • Must be able to read and understand blueprints, • Work safely and perform all work with quality workmanship, • Must be able to install metal stud framing, hang drywall, and acoustical ceilings, • Must have experience in the acoustical industry, • Need to be able to work well as a team and take direction from foreman and supervisors

Job Description Stucco, drywall, concrete, painting custom, roofing, doors , windows, fence, decking, and brick

Job Description The Policy and Payment Integrity Manager oversees the PPI team and assists with implementation of policies to perform reviews conducted by CERIS including but not limited to itemized bill review, professional review, hospital outpatient and DRG validation. In this position, you will be managing members of the PPI team including developing team strengths and improving weaknesses, identifying team goals, and evaluating team progress. The manager in this role provides trend analysis of internal auditing of claims for claim accuracy related to pre and post payment claims, targeted claims, high dollar claims, and any other claim or record that requires quality review to determine the claim accuracy; assist with development of internal quality assurance measures based on client policy and industry guidelines; perform quality assurance reviews (as needed); assist in researching and implementing best practices related to payment policy, and/or policy initiatives; researching various healthcare policies; interpreting client, state, and CMS payment policies; assist in writing internal quality assurance policies; work with department managers in implementing payment policies and processes to meet quality assurance guidelines. This is a remote role. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: • Assists with development and modification of standard operating procedures for PPI team., • Utilizes healthcare and auditing experience to design, develop and implement audit criteria that, • are relevant and necessary for the continuous development services performed by CERIS., • Exercises good judgment to resolve complex claim and appeal issues and makes sound decisions, • in the absence of detailed instructions or in an emergency situation, • Participates in discussion with internal and external stakeholders in regards to reviews, • conducted by CERIS including but not limited to itemized bill review, professional review,, • hospital outpatient and DRG validation., • Research, interpret and apply CMS, Federal, State and client policies to claims review, • Verbally communicate interpretation of CMS, Federal, State and client policies to providers, • Demonstrate ability to manage multiple projects, set priorities and manage to committed, • schedule, • Strong interpersonal skills and adaptive communication style, complex problem solving skills,, • drive for results, innovative, • Works with operational leaders within the business to provide recommendations on, • opportunities for process improvements., • Act as a resource and liaison for internal departments, account management, senior, • management and clients as needed, • Additional duties as assigned. KNOWLEDGE & SKILLS: • Strong knowledge of itemized bill review, ASC and outpatient claim review, • Ability to demonstrate understanding of CMS and commercial payer policy in written and verbal, • format, • Strong understanding of claims processing, ICD-10 Coding, DRG Validation, Coordination of, • Benefits, • Strong understanding of healthcare revenue cycle and claims reimbursement, • Proficient in Microsoft Office including Pivot Tables and Database Management, • Comfortable interfacing with clients and the C-Suite, • Demonstrate ability to manage multiple projects, set priorities and manage to committed, • schedule, • Strong interpersonal skills and adaptive communication style, complex problem solving skills,, • drive for results, innovative, • Excellent written and verbal communication skills, • Proven track record of delivering concrete results in strategic projects/programs, • Strong analytical and modeling ability and distilling data into actionable results, • Superb attention to detail and ability to deliver results in a fast paced and dynamic environment EDUCATION/EXPERIENCE: • Must maintain a current RN licensure in the state of employment, • Must maintain a current coding license (CPC, CCS, RHIT, etc), • 3+ years of management experience, • Minimum of 5 years’ experience in Operating Room, either as a circulating RN or scrub RN, as well as 2 years’ clinical experience in an acute care facility, • Bachelor’s degree in healthcare or related field, • 5+ years of relevant experience or equivalent combination of education and work experience, • 3+ years hospital bill audit, • Knowledge of worker's compensation claims process, • Prospective, concurrent and retrospective utilization review, • Previous experience in the following areas preferred:, • Medical bill coding and auditing, • DRG and Clinical Validation, • Experience in the acute clinical areas of facilities in O.R., I.C.U., C.C.U., E.R., Telemetry, Medical/Surgical, OB or L&D, Geriatrics and Orthopedics PAY RANGE: CorVel uses a market based approach to pay and our salary ranges may vary depending on your location. Pay rates are established taking into account the following factors: federal, state, and local minimum wage requirements, the geographic location differential, job-related skills, experience, qualifications, internal employee equity, and market conditions. Our ranges may be modified at any time. For leveled roles (I, II, III, Senior, Lead, etc.) new hires may be slotted into a different level, either up or down, based on assessment during interview process taking into consideration experience, qualifications, and overall fit for the role. The level may impact the salary range and these adjustments would be clarified during the offer process. Pay Range: $80,718 – $124,624 A list of our benefit offerings can be found on our CorVel website: CorVel Careers | Opportunities in Risk Management In general, our opportunities will be posted for up to 1 year from date of posting, or until we have selected candidate(s) to fulfill the opening, whichever comes first. About CERIS CERIS, a division of CorVel Corporation, a certified Great Place to Work® Company, offers incremental value, experience, and a sincere dedication to our valued partners. Through our clinical expertise and cost containment solutions, we are committed to accuracy and transparency in healthcare payments. We are a stable and growing company with a strong, supportive culture along with plenty of career advancement opportunities. We embrace our core values of Accountability, Commitment, Excellence, Integrity and Teamwork (ACE-IT!). A comprehensive benefits package is available for full-time regular employees and includes Medical (HDHP) w/Pharmacy, Dental, Vision, Long Term Disability, Health Savings Account, Flexible Spending Account Options, Life Insurance, Accident Insurance, Critical Illness Insurance, Pre-paid Legal Insurance, Parking and Transit FSA accounts, 401K, ROTH 401K, and paid time off. CorVel is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. #LI-Remote

Job Description Conducts a variety of maintenance functions for the Haltom City Public Works Department; operates and maintains departmental equipment and tools; and performs other related duties as assigned. In this position you will work in weather extremes Examples of Duties: • Repairs and resurfaces City streets; lays asphalt and concrete; backfills trenches and curbs., • Installs and/or repairs street signs and traffic barricades; constructs street signs as assigned., • Performs mowing, removes weeds, and lays sod; trims trees and hedges; applies pesticides and herbicides as assigned., • Operates equipment including bulldozers, backhoes, excavators, loaders, rollers, dump trucks, and water trucks; cleans equipment and performs preventive maintenance., • Transports materials and equipment to and from jobsites; loads and unloads trailers., • High School Diploma or equivalent, • One year public works maintenance experience; OR an equivalent combination of education and experience. Job Posted by ApplicantPro

Job Description Conducts a variety of maintenance functions for the Haltom City Public Works Department; operates and maintains departmental equipment and tools; and performs other related duties as assigned. Examples of Duties: • Repairs, maintains, and installs storm drains, and/or sprinklers., • Televises storm drains and/or locates underground utilities as assigned., • Repairs and lays concrete; backfills trenches and curbs., • Installs and/or repairs traffic barricades., • Performs mowing, removes weeds, and lays sod; trims trees and hedges; applies pesticides and herbicides as assigned., • Participates in the demolition of vacant and/or hazardous properties; removes demo materials from worksites., • Operates equipment including bulldozers, backhoes, excavators, loaders, rollers, dump trucks, and water trucks; cleans equipment and performs preventative maintenance., • Transports materials and equipment to and from jobsites; loads and unloads trailers., • Fabricates tools and other types of devices; performs welding as assigned. High School Diploma or equivalent, and one year public works maintenance experience; OR an equivalent combination of education and experience. Depending on area of assignment, other specialized certifications or licenses may be required. Must possess a valid Class A Texas Driver's License. Job Posted by ApplicantPro

Job Description Work Schedule: Monday - Thursday, 6:00 am - 3:00 pm Position Function - Under the direction of the Director of Parks & Recreation and/or Designee, performs assigned duties to support the Parks Maintenance Division to ensure the proper maintenance of City parks, grounds, green spaces, and common areas for City owned property and/or facilities providing for a safe and aesthetically pleasing environment. Essential Duties% of Performance Performs duties necessary to support the Parks Maintenance Division to ensure the proper maintenance, repair and care of City parks, grounds, green spaces, rights-of-way, ponds, swells, berms, community and common areas for City owned property and/or facilities providing for a safe and aesthetically pleasing environment. Responsible for the care and replacement of plants and trees to include, but not limited to: raking, pruning, mulching, clearing, planting, minor irrigation installs and repair, mowing, weeding, edging and painting. Responsible for safely using and proper care and maintenance of all tools and equipment necessary to complete projects, assignments and/or tasks.80% Responsible for preparing for events through constructing and/or deconstructing of fencing, barricades, chairs and stages, as well as “set-up” and “tear-down” tasks. Duties may include the cleaning of buildings and public restrooms, and moving office furniture. 15% Performs additional duties as assigned.5% Total 100% Physical DemandFrequency BalancingF BendingF CarryingF ClimbingO LegendCrawlingR CrouchingO C - ContinuousFine DexterityF Foot ControlsF F - FrequentlyHandlingF HearingC O - OccasionallyKneelingO LiftingF R - RarelyPushing/PullingF Reaching F N - NeverStandingF SittingO StoopingF TwistingF VisionC WalkingF Physical Demand Descriptions(The following descriptions are provided as an example of potential physical and/or sensory activities and does not address the potential for reasonable accommodation; it is intended as general examples of possible physical/sensory demands that might occur during the performance of the position functions/duties, and are not intended to be all inclusive.)Bending/Stooping/Twisting - set-up/tear-down events, trash/debris removal, digging/shoveling, trenching; concrete work, planting; landscaping, shoveling; etc. Climbing/Balancing - Ladders, stairs, mowers, equipment/vehicles, tree pruning, play ground equipment repair, etc.Fine Dexterity - phone, tools, equipment, etc.Foot Controls - driving, mowing, walking on uneven terrain, etc.Hearing - phone, assignments, communication with co-workers, supervisor, customers, work site, etc.Kneeling/Crouching/Crawling - set-up/tear-down events, trash/debris removal, digging/shoveling, trenching, concrete work, planting, landscaping, etc. Lifting/Carrying/Pushing/Pulling/Reaching/Handling - Up to 50lbs - work aids, equipment, tools, materials, set-up/tear-down events, trash/debris removal, concrete work, raking, mulching, digging/shoveling, trenching planting, landscaping, etc.Standing - Concrete/asphalt work, trash/debris removal, "flagging" traffic, setting up/tear down work areas, digging/shoveling, trenching, planting, etc. Talking - Communication with co-workers, supervisor, customers, etc.Vision - driving, equipment, power tools, etc. Walking - to and from shop, to and from buildings, at worksites, trash/debris removal, mowing, edging, concrete/asphalt work, uneven terrain, etc. Machines, Tools, Equipment and/or Work Aids(The following list is intended to provide examples of possible machines, equipment, tools and/or work aids that might be needed to perform position functions/duties and should not to be construed as a comprehensive or complete catalog. This list does not include and does not supersede any requirements with respect to safety or protective equipment, uniforms, apparel, gear or apparatuses required for the performance of any duties described herein.)Heavy equipment; hand-held power tools and equipment (gas & electric); mowers; tractors; hard hat; safety and/or protective clothing (e.g., hardhat, goggles, gloves, ear, etc.); steel-toed or composite-toed safety boots/shoes; etc.EnvironmentDuties are performed primarily within an outdoor environment or setting. Possible exposure to electrical & chemical hazards, water, vibration, loud noise, inclement weather, and dust, allergens, mold, inclement weather/extreme temperatures, etc.Requirements/Knowledge/Skills/AbilitiesRequired knowledge and experience is normally obtained through the completion of a curriculum resulting in either a High School diploma or GED, and one (1) to three (3) years work related experience in landscape, grounds maintenance, or related field is required. Must exhibit attention to detail, accuracy, and safety.Must be able to communicate and present oneself in a professional manner.Ability to establish and maintain effective working and professional relationships with City employees and officials, and the general public.Ability to take and follow oral instructions.Ability to read and understand instructions and product directions.Ability to work under high demands, short time constraints, and the pressure of a fast-paced work environment.Ability to work during weekends and night-time events and hours of operations.Skilled in operating ride and push mowers, and hand-held and/or power tools.Must possess a valid Class C driver license. Must pass all post offer pre-employment processes and/or procedures, to include but not limited to Drug Screen, Physical Examination, and applicable Background Checks.

Job Description This position is based on a 36-hour workweek Work schedule: Monday - Thursday, 6:00am - 3:00pm Position Function - Under the direction of the Director of Publics Works and/or Designee, performs assigned duties necessary to support the Street/Drainage division to ensure the proper construction, repair, and maintenance of streets, roadways, bridges, sidewalks, driveways, walking paths, curbs, gutters, storm drainage systems, and right-of-ways. Essential Duties% of Performance Performs duties necessary to support the Street/Drainage Division to ensure the proper construction, repair, and maintenance of streets, roadways, bridges, sidewalks, driveways, walking paths, curbs, gutters, storm drainage systems, and right-of-ways. Duties include, but are not limited to: setting forms; pouring, shoveling, and finishing concrete work; raking asphalt; and pothole repaired (hot or cold patch). Responsible for appropriate signage and/or traffic markers, and other traffic control measures. May perform heavy equipment operation as a secondary operator. 70% Performs duties to construct, repair, and maintain inlets, water feature structures, and storm flumes/structures. Duties include, but are not limited to: installation, repair, and maintenance of storm pipes, inlets, baffle boxes, and bridges.20%Assists with the proper maintenance of City grounds, retention ponds, right-of-ways, and common areas of City owned property and/or facilities, providing a safe and aesthetically pleasing environment. Duties include, but are not limited to: trash/debris removal, post-storm clean up, painting, lighting, etc. Responsible for safely using and proper care and maintenance of all tools and equipment necessary to complete projects, assignments, and/or tasks.5%Performs additional duties as assigned.5% Total:100% Physical DemandFrequency BalancingF BendingF CarryingF ClimbingO LegendCrawlingO CrouchingO C - ContinuousFine DexterityF Foot ControlsF F - FrequentlyHandlingF HearingC O - OccasionallyKneelingO LiftingF R - RarelyPushing/PullingF Reaching F N - NeverStandingF SittingO StoopingF TwistingF VisionC WalkingF Physical Demand Descriptions(The following descriptions are provided as an example of potential physical and/or sensory activities and does not address the potential for reasonable accommodation; it is intended as general examples of possible physical/sensory demands that might occur during the performance of the position functions/duties, and are not intended to be all inclusive.)Bending/Stooping/Twisting - set-up/tear-down worksite, construction, trash/debris removal, digging/shoveling, trenching, concrete/asphalt work, manual/physical labor, etc. Climbing/Balancing - Ladders, stairs, equipment, vehicles, uneven terrain, etc.Fine Dexterity - phone, tools, equipment, tools, etc.Foot Controls - driving, operation of equipment, manual labor, uneven terrain, etc.Hearing - construction site, phone, two-way radio, traffic, communication with co-workers, supervisor, and customers, etc.Kneeling/Crouching/Crawling - set-up/tear-down worksite, construction, trash/debris removal, equipment maintenance/repair, manual labor, etc.Lifting/Carrying/Pushing/Pulling/Reaching/Handling - Up to 100lbs - work aids, equipment, tools, materials, set-up/tear-down worksite, construction, trash/debris removal, concrete/asphalt work, etc.Standing - Concrete/asphalt work, trash/debris removal, setting up/tearing down work area, etc.Talking - Communication with co-workers, supervisor, and customers, two-way radios, phone, etc.Vision - driving, equipment, hand tools, power tools, etc. Walking - to and from shop, to and from buildings, at worksite, trash/debris removal, concrete/asphalt work, uneven terrain, etc.Machines, Tools, Equipment and/or Work Aids(The following list is intended to provide examples of possible machines, equipment, tools and/or work aids that might be needed to perform position functions/duties and should not to be construed as a comprehensive or complete catalog. This list does not include and does not supersede any requirements with respect to safety or protective equipment, uniforms, apparel, gear or apparatuses required for the performance of any duties described herein.)Heavy equipment, vehicle, hand-held and power tools and equipment, hard hat, safety and/or protective clothing (e.g., hardhat, goggles, gloves, ear, etc.), steel-toed or composite-toed safety boots/shoes, mobile communication devices, etc.EnvironmentDuties are performed primarily within an outdoor environment or setting. Possible exposure to electrical & chemical hazards; water; vibration; loud noise; inclement weather; and dust, allergens, mold, inclement weather/extreme temperatures, etc.Requirements/Knowledge/Skills/AbilitiesRequired knowledge and experience is normally obtained through the completion of a curriculum resulting in either a High School diploma or GED, and minimum of one (1) year of work related experience in Construction, Drainage, Transportation, Utilities or related field is required.Valid State of Texas Class A CDL is required. Ability to establish and maintain effective working and professional relationships with City employees and officials, and the general public.Ability to take and follow oral instructions, as well as hand signals.Ability to read and understand instructions and product directions.Ability to work under high demands, short time constraints, and the pressure of a fast-paced work environment.Ability to work during weekends and night-time events and hours of operations.Skilled in operating ride and push mowers, graders, and hand-held and/or power tools.Knowledge of trench procedures and safety.Knowledge of logout/tagout procedures and safety. Must be able to work "on-call" or emergency hours.Must be able to work outside normal business hours. Must exhibit attention to detail, accuracy, and safety.Must be able to communicate and present oneself in a professional manner.Must pass all post offer pre-employment processes and/or procedures, to include but not limited to Drug Screen, Physical Examination, and applicable Background Checks.

Job Description Position is posted "open until filled." All candidates must complete an online application, even if attaching a cover letter and resume. The schedule for this position will be Monday-Thursday 6:00am - 3:00pm. Posted rates are for a 36hour workweek. Position Function - Under the direction of the Director of Public Works and/or Designee, performs assigned duties to conduct manual labor to support the Water & Wastewater Division. Laborer level position. Essential Duties% of Performance Performs assigned duties necessary to conduct manual labor to support the Water & Wastewater Division. Duties include, but are not limited to: repair/installation of meters; distribution system line flushing; tapping mains; repair/installation of fire hydrants; and assisting with line locates. Responsible for digging, trenching, concrete work, cleaning, clearing, landscaping completed work site. Responsible for appropriate signage and/or traffic markers, and being a flag man.95% Performs additional duties as assigned.5% Total:100% Physical DemandFrequency BalancingF BendingF CarryingF ClimbingF LegendCrawlingO CrouchingO C - ContinuousFine DexterityF Foot ControlsF F - FrequentlyHandlingF HearingC O - OccasionallyKneelingO LiftingF R - RarelyPushing/PullingF Reaching F N - NeverStandingF SittingO StoopingF TwistingF VisionC WalkingF Physical Demand Descriptions(The following descriptions are provided as an example of potential physical and/or sensory activities and does not address the potential for reasonable accommodation; it is intended as general examples of possible physical/sensory demands that might occur during the performance of the position functions/duties, and are not intended to be all inclusive.)Bending/Stooping/Twisting - set-up/tear-down events; construction; trash/debris removal; digging/shoveling; manholes; trenching; concrete work; shoveling; confined spaces; etc. Climbing/Balancing - Ladders, stairs, mowers, equipment/vehicles, etc. Fine Dexterity - phone, tools, equipment, controls, etc. Foot Controls - driving, walking on uneven terrain, ladders, etc. Hearing - construction site, phone, assignments, communication with co-workers, supervisor, customers, etc. Kneeling/Crouching/Crawling - set-up/tear-down events, construction, trash/debris removal, etc. Lifting/Carrying/Pushing/Pulling/Reaching/Handling - Up to 100lbs - work aids, equipment, tools, materials, set-up/tear-down events, construction, trash/debris removal, concrete/asphalt work, manholes, etc.Standing - Concrete/asphalt work, trash/debris removal, "flagging" traffic; setting up work area; etc.Talking - Communication with co-workers, supervisor, customers, etc. Vision - driving, equipment, power tools, etc. Walking - to and from shop, to and from buildings, at worksites, trash/debris removal, mowing, edging, concrete work, uneven terrain, etc. Machines, Tools, Equipment and/or Work Aids(The following list is intended to provide examples of possible machines, equipment, tools and/or work aids that might be needed to perform position functions/duties and should not to be construed as a comprehensive or complete catalog. This list does not include and does not supersede any requirements with respect to safety or protective equipment, uniforms, apparel, gear or apparatuses required for the performance of any duties described herein.)Heavy equipment; hand-held power tools and equipment (gas & electric); mowers; tractors; SCBA; hard hat; safety and/or protective clothing (e.g., hardhat, goggles, gloves, ear, etc.); steel-toed or composite-toed safety boots/shoes; air compressor; paving breakers; pipe; clamps, vice grips; utility vehicles; etc.EnvironmentDuties are performed primarily within an outdoor environment or setting. Possible exposure to electrical & chemical hazards; water; vibration; loud noise; inclement weather; blood borne pathogens; dust; allergens; mold; etc.Requirements/Knowledge/Skills/AbilitiesRequired knowledge and experience is normally obtained through the completion of a curriculum resulting in either a High School diploma or GED, and minimum six (6) months of work related experience in Construction, Utilities, Pipeline Repair, or related field are required.Obtain Commercial Learner's Permit (CLP) within three (3) months of hire. Obtain State Class A CDL within six (6) months of hire.Must exhibit attention to detail, accuracy, and safety.Must be able to communicate and present oneself in a professional manner.Ability to establish and maintain effective working and professional relationships with City employees and officials, and the general public.Ability to take and follow oral instructions.Ability to read and understand instructions and product directions.Ability to work under high demands, short time constraints, and the pressure of a fast-paced work environment.Ability to be on-call and call-out.Ability to work during weekends and night-time events and hours of operations.Ability to properly operate hand tools and power tools.Ability to learn/perform pipeline repair and installation.Ability to learn/perform work place safety practices and procedures, including but not limited to: lockout/tagout, trench construction and safety, sewer gas safety, etc.Knowledge of trench procedures and safety.Knowledge of logout/tagout procedures and safety. Must possess a valid Class C driver license. Must pass all post offer pre-employment processes and/or procedures, to include but not limited to Drug Screen, Physical Examination, and applicable Background Checks.

Job DescriptionAs our Building Services Technician, you will perform facility maintenance services, repair work, minor modifications and urgent construction services for specialized commercial construction projects. Successful team members in this role have a proven carpentry background, are self-motivated and exhibit a high standard for service, professionalism and safety.What you'll do • Technical Skills: Skilled in rough and finish carpentry, painting, and basic concrete work, with knowledge of building codes, ADA standards, and commercial-grade materials., • Problem Solving & Material Sourcing: Skilled at diagnosing issues, implementing cost-effective repairs, and efficiently sourcing quality materials through accurate estimating, vendor coordination, and budget-conscious purchasing to maximize project profitability., • Safety & Compliance: Consistently follows OSHA and job site safety protocols, properly uses PPE, and maintains clean, hazard-free work areas., • Communication & Collaboration: Communicates effectively with clients, supervisors, and team members to ensure smooth project execution and strong relationships., • Planning & Time Management: Efficiently organizes tasks, meets deadlines, and completes work to company standards with minimal supervision.What you bring to the team, • 3-5+ years of commercial carpentry and/or facilities maintenance experience., • Valid driver’s license., • Ability to work flexible hours daily., • Bilingual in English and Spanish preferred., • High school diploma or GED preferred., • Proficiency with technology and online applications (i.e., computer, tablet, scheduling software, internet, email, calendar, PDF).Essential Functions, • Perform physical activities such as twisting, stooping, bending, squatting, kneeling, crawling, climbing ladders and stairs, walking on uneven ground, working on scaffolds above ground, and in ditches below ground. Up to seven hours of an eight-hour shift are spent standing., • Work comfortably in confined spaces without fear and demonstrate the ability to read GHS labels on containers through color recognition., • Have depth perception to identify hazards such as excavations and to hear horns or sirens from moving equipment., • Exhibit good finger manipulation skills for precise tasks., • Climb on light and heavy equipment, carry, and use hand tools effectively., • Handle constant lifting of 10 lbs, frequent lifting of 25 lbs, and a maximum single-person lifting capacity of 50 lbs (assistance required for items over 50 lbs). Tasks may involve reaching at, above, or below shoulder height., • Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.Work Environment, • Construction site environment. You may be exposed to noise, dampness, heat, cold, dust, fumes (occasionally, but always well-ventilated), chemicals (will work with, but normally won’t work in a chemical environment) and confined spaces (on occasion). Temperatures range from 25º to 115ºF., • Wear puncture-resistant footwear, long pants, and shirts with four-inch sleeves., • Use all required PPE, including hard hats, safety glasses, gloves, high-visibility vests, earplugs, fall protection gear, and respiratory equipment, as provided., • Maintain a professional, clean, and well-groomed appearance.

Job Description Schedule: Monday - Thursday, 6:00am - 3:00pm Position Function - Under the direction of the Director of Public Works and/or Designee, performs assigned duties necessary to support the water and wastewater divisions by managing the daily tasks of related crews for the proper maintenance, repair, inspection and construction of water and wastewater infrastructure. Position is a "working" lead position that has the authority to supervise and direct crews. Essential Duties% of Performance Performs assigned duties necessary to support the water and wastewater divisions by managing the daily tasks of related crews for the proper maintenance, repair, inspection and construction of water and wastewater infrastructure (e.g., pipes, valves, hydrants, etc.). Responsible for the successful planning and completion of assigned projects. Duties include, but not limited to: work inspections, equipment and supply inventory and procurement, proper use and planning of equipment and materials, maintain workplace and work site safety, development of work orders, customer communications, etc. Position is required to perform all duties assigned to the crew he/she leads to include, but not limited to: manual labor, heavy equipment operation, etc. 80% Assists with performance evaluations and disciplinary actions. Responsible to fulfill duties of the foreman during his/her absence. 15% Performs additional duties as assigned.5% Total:100% Physical DemandFrequency BalancingF BendingF CarryingF ClimbingO LegendCrawlingR CrouchingO C - ContinuousFine DexterityF Foot ControlsF F - FrequentlyHandlingF HearingC O - OccasionallyKneelingO LiftingF R - RarelyPushing/PullingF Reaching F N - NeverStandingF SittingO StoopingF TwistingF VisionC WalkingF Physical Demand Descriptions(The following descriptions are provided as an example of potential physical and/or sensory activities and does not address the potential for reasonable accommodation; it is intended as general examples of possible physical/sensory demands that might occur during the performance of the position functions/duties, and are not intended to be all inclusive.)Bending/Stooping/Twisting - construction, digging/shoveling, trenching, concrete work, manual/physical labor, etc. Climbing/Balancing - Ladders, stairs, heavy equipment, vehicles, uneven terrain, etc..Fine Dexterity - phone, tools, equipment, tools, etc.Foot Controls - driving, operation of equipment, manual labor, uneven terrain, etc.Hearing - phone, two-way radio, traffic, communication with co-workers, supervisor, and customers, etc..Kneeling/Crouching/Crawling - set-up/tear-down worksite, construction, heavy equipment and/or vehicle maintenance and repair, etc.Lifting/Carrying/Pushing/Pulling/Reaching/Handling - Up to 100lbs - work aids, equipment, tools, materials, set-up/tear-down worksite, construction, concrete work, etc.Standing - Concrete or asphalt work, setting up or tearing down work area, etc.Talking - Communication with co-workers, supervisor, and customers, two-way radios, phone, etc.Vision - driving, equipment, power tools, etc. Walking - to and from shop, to and from buildings, at worksites, uneven terrain, etc.Machines, Tools, Equipment and/or Work Aids(The following list is intended to provide examples of possible machines, equipment, tools and/or work aids that might be needed to perform position functions/duties and should not to be construed as a comprehensive or complete catalog. This list does not include and does not supersede any requirements with respect to safety or protective equipment, uniforms, apparel, gear or apparatuses required for the performance of any duties described herein.)Heavy equipment, hand-held power tools and equipment, hard hat, safety and/or protective clothing (e.g., hardhat, goggles, gloves, ear, etc.), steel-toed or composite-toed safety boots/shoes, computer software and hardware, mobile communication devices, etc. EnvironmentDuties are performed primarily within an outdoor environment or setting. Possible exposure to electrical and chemical hazards, water, sewage, vibrations, loud noise, inclement weather, dust, allergens, and mold.Requirements/Knowledge/Skills/AbilitiesRequired knowledge and experience is normally obtained through the completion of a curriculum resulting in either a High School diploma or GED, and a minimum of two (2) years of work experience in Water or Wastewater Utility, Construction or a related field are required.One (1) year experience supervising multiple employees preferred.Valid State of Texas Class A CDL required.Grade C Waster Distribution and/or Class II Wastewater Collection certifications, preferred.Ability to use computer and video equipment to conduct pipeline inspections, to include the ability to produce reports.Ability to read letters, emails, memos, contracts, professional and industry literature, spreadsheets, and other job related analysis.Ability to write letters, memos, and emails.Ability to exercise substantial independent judgment and decision-making. Ability to monitor and assess operations, workload, projects, and staff performance.Ability to multi-task, evaluate, analyze, and execute with widely varied tasks involving many complex and significant variables.Ability to competently use work order systems and work related software and computer equipment.Ability to establish and maintain effective working relationships with City employees, other Federal, State, and local governmental representatives, contractors, consultants, vendors, media, and the general.Ability to exhibit attention to detail, accuracy, and safety.Ability to communicate and present oneself in a professional manner.Ability to read and understand technical instructions, maps and schematics.Thorough knowledge of construction methods, materials and practices with particular emphasis on underground utility construction and repair. Thorough knowledge of work place safety practices and procedures, including but not limited to: lockout/tagout, sewer gas safety, etc.Must be able to work "on-call" hours.Must be able to work outside normal business hours. Must pass all post offer pre-employment processes and/or procedures, to include but not limited to Drug Screen, Physical Examination, and applicable Background Checks.

Job Description Conducts a variety of maintenance functions for the Haltom City Public Works Department; operates and maintains departmental equipment and tools; and performs other related duties as assigned. There are opportunities to advance within the Public Works Construction Division or in other divisions within Public Works. Examples of Duties: • Repairs, maintains, and installs water mains, service lines, storm drains, valves, water meters, fire hydrants, and/or sprinklers., • Locates underground utilities as assigned., • Repairs and resurfaces City streets; lays asphalt and concrete; backfills trenches and curbs., • Installs and/or repairs traffic barricades as assigned., • Performs duties such as lays sod, trims trees and hedges., • Participates in the demolition of vacant and/or hazardous properties; removes demo materials from worksites., • Operates equipment including bulldozers, backhoes, excavators, loaders, rollers, dump trucks, and water trucks; cleans equipment and performs preventative maintenance., • Transports materials and equipment to and from jobsites; loads and unloads trailers., • Fabricates tools and other types of devices; performs welding as assigned., • Performs other duties as assigned or required. Typical Qualifications: High School Diploma or equivalent, and one year public works maintenance experience; OR an equivalent combination of education and experience. Depending on area of assignment, other specialized certifications or licenses may be required. Must possess a valid Class A Texas Driver's License. Job Posted by ApplicantPro

Job DescriptionPosition is posted "open until filled." All candidates must complete an online application, even if attaching a cover letter and resume. The schedule for this position will be Monday-Thursday 6:00am - 3:00pm. Posted rates are for a 36-hour workweek. Position Function - Under the direction of the Director of Publics Works and/or Designee, performs assigned duties necessary to support the Street/Drainage division to ensure the proper construction, repair, and maintenance of streets, roadways, bridges, sidewalks, driveways, walking paths, curbs, gutters, storm drainage systems, and right-of-ways. Essential Duties% of Performance Performs duties necessary to support the Street/Drainage Division to ensure the proper construction, repair, and maintenance of streets, roadways, bridges, sidewalks, driveways, walking paths, curbs, gutters, storm drainage systems, and right-of-ways. Duties include, but are not limited to: setting forms; pouring, shoveling, and finishing concrete work; raking asphalt; and pothole repaired (hot or cold patch). Responsible for appropriate signage and/or traffic markers, and other traffic control measures.70% Performs duties to construct, repair, and maintain inlets, water feature structures, and storm flumes/structures. Duties include, but are not limited to: installation, repair, and maintenance of storm pipes, inlets, baffle boxes, and bridges.15% Assists with the proper maintenance of City grounds, retention ponds, right-of-ways, and common areas of City owned property and/or facilities, providing a safe and aesthetically pleasing environment. Duties include, but are not limited to: trash/debris removal, post-storm clean up, painting, lighting, etc. Responsible for safely using and proper care and maintenance of all tools and equipment necessary to complete projects, assignments, and/or tasks.10% Performs additional duties as assigned.5% Total:100% Physical DemandFrequency BalancingF BendingF CarryingF ClimbingO LegendCrawlingO CrouchingO C - ContinuousFine DexterityF Foot ControlsF F - FrequentlyHandlingF HearingC O - OccasionallyKneelingO LiftingF R - RarelyPushing/PullingF Reaching F N - NeverStandingF SittingO StoopingF TwistingF VisionC WalkingF Physical Demand Descriptions(The following descriptions are provided as an example of potential physical and/or sensory activities and does not address the potential for reasonable accommodation; it is intended as general examples of possible physical/sensory demands that might occur during the performance of the position functions/duties, and are not intended to be all inclusive.)Bending/Stooping/Twisting - set-up/tear-down worksite, construction, trash/debris removal, digging/shoveling, trenching, concrete/asphalt work, manual/physical labor, etc. Climbing/Balancing - Ladders, stairs, equipment, vehicles, uneven terrain, etc.Fine Dexterity - phone, tools, equipment, tools, etc.Foot Controls - driving, operation of equipment, manual labor, uneven terrain, etc.Hearing - construction site, phone, two-way radio, traffic, communication with co-workers, supervisor, and customers, etc.Kneeling/Crouching/Crawling - set-up/tear-down worksite, construction, trash/debris removal, equipment maintenance/repair, manual labor, etc.Lifting/Carrying/Pushing/Pulling/Reaching/Handling - Up to 100lbs - work aids, equipment, tools, materials, set-up/tear-down worksite, construction, trash/debris removal, concrete/asphalt work, etc.Standing - Concrete/asphalt work, trash/debris removal, setting up/tearing down work area, etc.Talking - Communication with co-workers, supervisor, and customers, two-way radios, phone, etc.Vision - driving, equipment, hand tools, power tools, etc. Walking - to and from shop, to and from buildings, at worksite, trash/debris removal, concrete/asphalt work, uneven terrain, etc.Machines, Tools, Equipment and/or Work Aids(The following list is intended to provide examples of possible machines, equipment, tools and/or work aids that might be needed to perform position functions/duties and should not to be construed as a comprehensive or complete catalog. This list does not include and does not supersede any requirements with respect to safety or protective equipment, uniforms, apparel, gear or apparatuses required for the performance of any duties described herein.)Heavy equipment, vehicle, hand-held and power tools and equipment, hard hat, safety and/or protective clothing (e.g., hardhat, goggles, gloves, ear, etc.), steel-toed or composite-toed safety boots/shoes, mobile communication devices, etc.EnvironmentDuties are performed primarily within an outdoor environment or setting. Possible exposure to electrical & chemical hazards; water; vibration; loud noise; inclement weather; and dust, allergens, mold, inclement weather/extreme temperatures, etc.Requirements/Knowledge/Skills/AbilitiesRequired knowledge and experience is normally obtained through the completion of a curriculum resulting in either a High School diploma or GED, and minimum of six (6) months work of related experience in Construction, Drainage, Transportation, Utilities or related field are required.Obtain Commercial Learner's Permit (CLP) within three (3) months of hire. Obtain State Class A CDL within six (6) months of hire.Ability to establish and maintain effective working and professional relationships with City employees and officials, and the general public.Ability to take and follow oral instructions, as well as hand signals.Ability to read and understand instructions and product directions.Ability to work under high demands, short time constraints, and the pressure of a fast-paced work environment.Ability to work during weekends and night-time events and hours of operations.Skilled in operating ride and push mowers, graders, and hand-held and/or power tools.Knowledge of trench procedures and safety.Knowledge of logout/tagout procedures and safety. Must be able to work "on-call" or emergency hours.Must be able to work outside normal business hours. Must exhibit attention to detail, accuracy, and safety.Must be able to communicate and present oneself in a professional manner.Must pass all post offer pre-employment processes and/or procedures, to include but not limited to Drug Screen, Physical Examination, and applicable Background Checks.

Job DescriptionSkilled Laborer – Heavy Civil Construction 📍 Location: South East, South Westt, Mid Atlantic or Mid West (Travel is Required) 🏢 Company: Gregory Construction Gregory Construction, a Christian-principled, award-winning contractor, is looking for Skilled Laborers to join our growing team. In this role, you’ll support heavy civil and mission-critical projects such as data centers, with opportunities to use and grow skills in pipe handling, grading, underground utilities, and concrete. What You’ll Do: * Assist with site prep, excavation, trenching, and backfilling. * Support crews with underground utility installation and concrete work. * Operate and maintain hand tools and small equipment safely. * Keep job sites organized, clean, and safe. * Work as part of a team to meet project goals and deadlines. Required Qualifications: * Previous construction experience (pipe handling, grading, utilities, or concrete preferred). * Ability to lift 50+ lbs. and work outdoors in all weather conditions. * Reliable transportation and valid driver’s license. * Strong work ethic, teamwork, and commitment to safety. Preferred Qualifications: * Experience on mission-critical or data center projects. * Familiarity with basic grade checking and small equipment operation. * OSHA 10/30 certification. What We Offer: * Competitive pay with overtime opportunities. * Comprehensive benefits (health, dental, PTO, 401(k) with company match). * Training and advancement opportunities. * A faith-based, team-oriented culture rooted in safety, integrity, and excellence. 👉 Apply today on Indeed or send your resume directly to Powered by JazzHR 2DN64HQgXe

Job Description RoMix is seeking a qualified in-house sales representative to handle established customers (phone calls and emails) Candidate will be generating sales work orders and updating customer information in database. Experience with a degree in Sales or Marketing preferred or equivalent combination of education and experience. Monday through Friday 8:00am to 4:30pm. No weekends. We offer a competitive salary along with a commission potential of $100k plus a year. Our company offers wonderful insurance and benefits along with holiday pay, paid vacation and sick days. Check us out on the web Company DescriptionRoMix, Inc. is an industry leader across the country with more than 40+ years of serving the ready mix concrete business. RoMix specialized in bio-degradable concrete removing detergent compounds, featuring cutting edge alternatives to harsh acid products, specifically with "Back-Set" Molecular Cement Dissolver. In addition, RoMix offers a full line of soaps and anti-stick products, as well as state of the art spray systems and dispensers.RoMix, Inc. is an industry leader across the country with more than 40+ years of serving the ready mix concrete business. RoMix specialized in bio-degradable concrete removing detergent compounds, featuring cutting edge alternatives to harsh acid products, specifically with "Back-Set" Molecular Cement Dissolver. In addition, RoMix offers a full line of soaps and anti-stick products, as well as state of the art spray systems and dispensers.

Job Description Equipment Outside Sales Representative – Construction Equipment Location: FTW, TX Full-Time | Commission + Monthly Auto & Cell Phone Allowance Join the Barnsco Texas Team – A Leading Name in Concrete Construction Since 1984 Are you a driven, goal-oriented sales professional with a passion for the construction equipment industry? Do you enjoy building strong client relationships and closing deals that make an impact? Barnsco Texas is looking for an experienced Equipment Outside Sales Representative to join our growing team! This position offers competitive commission, a monthly vehicle and cell phone allowance, and the opportunity to work with a trusted name in construction supplies and equipment across Texas. About the Role As an Equipment Outside Sales Representative, you’ll be responsible for selling new and used construction equipment from Barnsco’s trusted vendors. Your focus will be on growing market share through in-person visits, relationship development, and effective territory management. You’ll be the face of Barnsco, driving growth through expert product knowledge and top-tier service. Key Responsibilities: • Promote and sell Barnsco’s equipment, products, and services to new and existing customers., • Identify and pursue leads through cold calling, field visits, and referrals., • Quote prices, negotiate terms, and close sales., • Prepare financial documents and sales contracts., • Provide on-site demos and technical support to prospects and customers., • Build long-term relationships and deliver ongoing account service., • Coordinate delivery and support from internal departments., • Attend trade shows, vendor training, and customer events., • Manage call schedule efficiently across your assigned territory., • Stay up-to-date on product knowledge and industry trends. ✅ What We’re Looking For: • Bachelor’s degree preferred., • Prior outside sales experience (especially in construction equipment or related industries)., • Strong presentation, communication, and negotiation skills., • Tech-savvy with proficiency in Microsoft Word, Excel, and business systems., • Self-motivated, organized, and able to manage time independently., • Must have a valid driver’s license and ability to work remotely., • Professional appearance and sales demeanor. What We Offer: • Base salary + commission – earn based on your performance., • Monthly auto and cell phone allowance., • Full benefits package (medical, dental, vision, 401(k), etc.), • Paid training and professional development., • Supportive and growth-oriented company culture., • Access to the best equipment brands in the industry. About Barnsco Texas Barnsco Texas, a proud member of the Kodiak Building Partners family, has been serving the concrete construction industry in Texas since 1984. We provide rebar fabrication, post-tension, concrete construction supplies, engineering services, and equipment sales/rentals. At Barnsco, we believe in empowering our team, rewarding performance, and creating opportunities for growth. Ready to build your future with us? Apply today and let’s talk! Barnsco Texas is an equal opportunity employer. All qualified applicants will be considered for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Company DescriptionBarnsco Texas, a member of the Kodiak Building Partners family, has been serving the concrete construction markets in Texas since 1984. We are a Texas-based company that offers equipment sales, rentals, and maintenance services. Additionally, we provide concrete constructions supplies, equipment sales, rental, rebar fabrication, full service post-tension, and engineering services. At Barnsco Texas, our core values are at the heart of everything we do. We provide a unique environment that encourages individual growth and recognizes individual performance and hard work. Our management team is visible and accessible, ensuring effective communication. If you are seeking growth opportunities in a stable company, look no further than Barnsco Texas.Barnsco Texas, a member of the Kodiak Building Partners family, has been serving the concrete construction markets in Texas since 1984. We are a Texas-based company that offers equipment sales, rentals, and maintenance services. Additionally, we provide concrete constructions supplies, equipment sales, rental, rebar fabrication, full service post-tension, and engineering services.\r\nAt Barnsco Texas, our core values are at the heart of everything we do. We provide a unique environment that encourages individual growth and recognizes individual performance and hard work. Our management team is visible and accessible, ensuring effective communication. If you are seeking growth opportunities in a stable company, look no further than Barnsco Texas.

Job Description As a sales representative at RoMix, you will play a key role in driving revenue and building customer relationships. Key Responsibilities include: building, developing, and managing customer portfolios, strong relationships with new and existing customers to identify new business opportunities. Generating leads, conduction outreach and engaging potential customers through calls, emails and in-person meetings to present tailored solutions. Presenting our products to customers and clearly articulating their value to close sales. Keeping accurate and detailed records of sales activities. Staying informed on industry trends, product updates, and competitors activities to effectively position RoMix, Inc. in the market and maintain a competitive edge. Success Criteria is 2+ plus of proven experience as a sales representative or in a similar sales. Excellent communication, negotiation, and relationship building skills, with the ability to connect with customers and understand their needs. To be successful in this role you will need to meet or exceed monthly sales quotas, demonstrating the ability to drive consistent revenue growth. Show an increase in customer portfolio size and retention rates, reflecting the ability to maintain and nurture long-term relationships. Deliver exceptional customer service and reinforce the company's reputation. Base Salary plus Commission Company DescriptionRoMix, Inc. is an industry leader across the country with more than 40+ years of serving the ready mix concrete business. RoMix specialized in bio-degradable concrete removing detergent compounds, featuring cutting edge alternatives to harsh acid products, specifically with "Back-Set" Molecular Cement Dissolver. In addition, RoMix offers a full line of soaps and anti-stick products, as well as state of the art spray systems and dispensers.RoMix, Inc. is an industry leader across the country with more than 40+ years of serving the ready mix concrete business. RoMix specialized in bio-degradable concrete removing detergent compounds, featuring cutting edge alternatives to harsh acid products, specifically with "Back-Set" Molecular Cement Dissolver. In addition, RoMix offers a full line of soaps and anti-stick products, as well as state of the art spray systems and dispensers.

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! Wachter is accepting applications for Low Voltage Project Technicians for service and project work at various locations across the United States. This position is responsible for installing, troubleshooting, and repairing structured cabling systems in various environments. This full-time position requires travel and a willingness to learn and help in other structured cabling environments if needed. We seek self-motivated and reliable technicians who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Benefits Package: Company Paid! • Medical, Dental, Prescription & Vision Benefits--No premium cost!, • Life, AD&D and LTD insurance, • Paid Vacation and Holidays, • MD Live, TriaHealth, Legal and Identity Theft Monitoring, • Company-Matched 401(k) and IRA Retirement Savings, • Per-Diem paid when overnight travel is required, • Drive time and mileage paid for use of personal vehicle when travel is requiredRequirements:, • Experience as a Data Cable Technician., • Strong background in installing and troubleshooting structured cabling systems in retail environments., • Must hold a current valid State required license(s) for low voltage/burglar alarm/fire alarm/security/CCTV., • Available for extensive travel., • Flexible and willing to work on-call, day or night shifts as the jobs require., • Experience reading blueprints and site maps., • Experience in CCTV, Voice, and Fire Alarm cabling is a plus., • Knowledgeable in identifying independent colors and learning color codes., • Ability to work in cramped spaces., • Experience working with Copper and Fiber., • Ability to operate a BOOM or scissor lift, and ability to work at heights., • Has PPE, basic telecommunication tools, and hand tools., • Reliable transportation with required insurance coverage., • Must have knowledge of cabling infrastructure., • Great communication skills; verbal and written., • Excellent customer relationship skills., • Highly proficient with the use of email, spreadsheets, and the ability to learn internal systems., • Experience in conduit installation is a plus., • Valid driver's license with a clean driving record; no DUI or DWI in the last three years. Responsibilities:, • Installation, troubleshooting, and maintenance of various cabling infrastructure., • Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work., • Ensuring all cables are neatly tied and bundled according to safety regulations., • Assist with pre-installation opportunities by designing and planning technical solutions, • Installing of cable support structures such as j-hooks, cable racks, and innerduct., • Conduct tests to ensure all newly installed cable systems and component devices are operational., • Troubleshoot issues with cable networks., • Ensure electrical systems meet local, county, state, or federal codes; legal and/or insurance requirements., • Adhere to all required project safety requirements as set forth by Wachter, our customers, or OSHA.

Job Description Position: Journeyman Ironworker Job Location: Crowley, TX Position Type: Full-Time • Base Wage: $30-$32 hr, • Crowley Indoor Track Facility Iron Worker Wage Scale $35.82 hr, • $550 per-diem and travel pay if eligible (home must be outside 60 mile radius of job site to receive travel or per diem), • Medical insurance and other insurance benefits available., • 1-week Paid vacation & paid holidays after 1 year of service., • Must be eligibe to work in the US. Required Skills • Bolt-up structural member following blueprints and instructions from supervisors., • Rig structural-steel members to hoist cables, using chains, or cables., • Hoist steel beams, girders, and columns into place, using cranes, or signal hoisting equipment operators to lift and position structural-steel members., • Detail Work: may include installing angle and bent plate, welding clips, joists, tube steel or angle kickers; installing safety cable and safety posts; or shaking out and spreading joists and long spans., • Assembling: Plumbing of structural steel; installing deck; installing and welding steel stairs, handrail and guardrail., • Field fabrication or assembly of metal parts such as steel frames, columns, beams, and girders, according to blueprints or instructions from supervisors., • Use all safety and personal protective equipment for the purpose intended. Use of safety harness and lanyard for proper tie off., • Operate boom lift and scissor lift., • Pull, push, or pry structural-steel members into approximate positions for bolting into place., • Rigger / Signal Person, • OSHA 10, • Aerial Lift

Job Description Looking for an experienced AutoCAD designer to assist in detail drawings for fiberglass and concrete structures. Need to create fabrication drawings for our vendors to meet delivery deadlines. Would work in our office in Fort Worth under the supervision of our chief draftsman. Will provide a CAD workstation.. 8 hour days. Company DescriptionStable company with 40 years experienceStable company with 40 years experience

Job Description About the job Company Description Ready Cable, founded in 1988, is a supplier of Rebar and Post-Tension Cables for the residential and commercial construction community. We are now pleased to offer our clients Framing Lumber. With multiple production facilities and walk-in storefronts across Texas, Ready Cable provides quality products, excellent customer service, and fast turnaround times. As a member of industry associations like the Post-Tensioning Institute, Ready Cable has the expertise to meet all project needs. Role Description This is a full-time on-site role for an Outside Sales Framing Lumber position. The role involves field service, customer service, sales, training, and account management tasks to support and grow the company's client base. Responsibilities • Identify leads, manage prospects, and acquire new business, • Multi Family, • Residential, • Commercial, • Develop and maintain relationships with existing clients, • Knowledge of and ability to answer technical questions about building materials based on clients' needs, • Coordinate with the accounts receivable department to ensure that all invoices are paid in full promptly by your customers, • Project Management experience: Planning and execution of projects, including monitoring progress, identifying risks, and ensuring quality control, • Take Off’s: Ability to read plans/details to determine quantity/size/type of required materials for bidding and order processing, • Meet established goals for territory development and sales quotas Qualifications • Knowledge of lumber and building materials, both residential and commercial, • 3-5 years of experience in sales, preferably outside sales, • Experience in developing and executing territory sales strategies, • Strong presentation, negotiation, and closing skills, • Self-motivated and able to work independently to meet or exceed goals, • Microsoft Office, Excel, and Outlook Ready Cable offers the following Benefits: • Medical, • Vision, • Dental, • Paid Vacation, • Auto Allowance, • Mileage Reimbursement Job Type: Full Time Location: DFW (Keller) Salary: Compensation is competitive and based on experience Company DescriptionReady Cable was founded in 1988 with the goal of providing concrete contractors quality products, excellent customer service, quick turn around and the best overall value pricing. Over the years the business has grown to supply and service both the residential and commercial construction community catering to projects as small as paving to high rise buildings. We take pride in providing quality service with fast turnaround times from our facilities in Houston (2 locations), Austin, San Antonio, Fort Worth, Royse City, Waxahachie, and McKinney. With 8 locations and hundreds of staff members, Ready Cable has the knowledge, skill, and capacity to meet all your project needs.Ready Cable was founded in 1988 with the goal of providing concrete contractors quality products, excellent customer service, quick turn around and the best overall value pricing. Over the years the business has grown to supply and service both the residential and commercial construction community catering to projects as small as paving to high rise buildings.\r\n\r\nWe take pride in providing quality service with fast turnaround times from our facilities in Houston (2 locations), Austin, San Antonio, Fort Worth, Royse City, Waxahachie, and McKinney. \r\n\r\nWith 8 locations and hundreds of staff members, Ready Cable has the knowledge, skill, and capacity to meet all your project needs.

Job Description The Payment Integrity Analyst is responsible for accurately reviewing pre and post pay claim audits based on client, policy, industry standards and/or CMS guidelines. This is a remote position. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: • Reviews, analyzes, and completes internal audits and/or appeals in accordance with client policy, CMS guidelines and industry standards in clear and professional written communication., • Ability to use clinical judgement and analytical skills to appropriately review documentation submitted for claim audits., • Utilize clinical judgement to appropriately interpret and apply client policies along with CMS guidelines as it relates to reviews done by CERIS such as itemized bill, DRG and/or specialty audits., • Utilize applicable tools and resources to complete internal audits and/or appeals., • Timely completion of internal audits and/or appeals., • Attends Clinical Team Meetings, All Company Meetings, Education Opportunities, Trainings, and other potential meetings, • Ability to demonstrate understanding of CMS and commercial payer policy in written and verbal format, • Strong understanding of claims processing, ICD-10 Coding, DRG Validation, Coordination of Benefits, • Strong understanding of healthcare revenue cycle and claims reimbursement, • Proficient in Microsoft Office including Pivot Tables and Database Management, • Comfortable interfacing with clients and the C-Suite, • Demonstrate ability to manage multiple projects, set priorities and adhere to committed schedule, • Strong interpersonal skills and adaptive communication style, complex problem solving skills, drive for results, innovative, • Excellent written and verbal communication skills, • Proven track record of delivering concrete results in strategic projects/programs, • Strong analytical and modeling ability and distilling data into actionable results, • Superb attention to detail and ability to deliver results in a fast paced and dynamic environment EDUCATION/EXPERIENCE: • Must maintain a current LPN, LVN and/or RN licensure, • Preferred experience with health insurance denials and/or appeals, payer audits, or vendor audits, • Previous experience in one or more of the following areas required:, • Medical bill auditing, • Experience in the acute clinical areas of facilities in O.R., I.C.U., C.C.U., E.R., Telemetry, Medical/Surgical, OB or L&D, Geriatrics and Orthopedics, • Knowledge of worker's compensation claims process, • Prospective, concurrent and retrospective utilization review, • Bachelor’s degree in healthcare or related field preferred, • 1+ years healthcare revenue cycle, • 1+ years of relevant experience or equivalent combination of education and work experience, • 1+ years hospital bill audit PAY RANGE: CorVel uses a market based approach to pay and our salary ranges may vary depending on your location. Pay rates are established taking into account the following factors: federal, state, and local minimum wage requirements, the geographic location differential, job-related skills, experience, qualifications, internal employee equity, and market conditions. Our ranges may be modified at any time. For leveled roles (I, II, III, Senior, Lead, etc.) new hires may be slotted into a different level, either up or down, based on assessment during interview process taking into consideration experience, qualifications, and overall fit for the role. The level may impact the salary range and these adjustments would be clarified during the offer process. Pay Range: $63,902 – $96,662 A list of our benefit offerings can be found on our CorVel website: CorVel Careers | Opportunities in Risk Management In general, our opportunities will be posted for up to 1 year from date of posting, or until we have selected candidate(s) to fulfill the opening, whichever comes first. About CERIS CERIS, a division of CorVel Corporation, a certified Great Place to Work® Company, offers incremental value, experience, and a sincere dedication to our valued partners. Through our clinical expertise and cost containment solutions, we are committed to accuracy and transparency in healthcare payments. We are a stable and growing company with a strong, supportive culture along with plenty of career advancement opportunities. We embrace our core values of Accountability, Commitment, Excellence, Integrity and Teamwork (ACE-IT!). A comprehensive benefits package is available for full-time regular employees and includes Medical (HDHP) w/Pharmacy, Dental, Vision, Long Term Disability, Health Savings Account, Flexible Spending Account Options, Life Insurance, Accident Insurance, Critical Illness Insurance, Pre-paid Legal Insurance, Parking and Transit FSA accounts, 401K, ROTH 401K, and paid time off. CorVel is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. #LI-Remote

Job Description The design lead oversees the Design Team in successfully planning, executing, and delivering primarily large-scale projects. Responsibilities include: • Act as the primary design engineer of record and project lead for projects congruent with experience., • Provide regularly scheduled project reviews to review design progress, schedule, outstanding issues, etc. to provide guidance and support to design staff. • Sign and seal plan sets as appropriate for level of involvement in the project., • Create or direct schematic design layouts and establish initial design direction., • Plan out project tasks, priorities, timelines, and delegate tasks to project engineers and designers., • Perform QA/QC of delegated tasks., • Provide technical support and develop expertise of project engineers as necessary., • Communicate and coordinate with and between clients and design teams., • Provide design team assistance with complex RFIs and CA issues., • Provide guidance and/or generate Program of Requirements and Master Plans., • Help develop additional augmentation procedures and integration., • Generate proposals as necessary., • Meet deadlines., • Mentor staff on engineering design and project delivery., • Other duties as assigned and necessary. Education/ Experience: • Required: Bachelor of Science in Structural Engineering, • Preferred: Master's degree in Structural Engineering, • 5-10 years of engineering experience with project management experience, • Experience in the use of various structural design codes and specifications including but not limited to IBC, IRC, ASCE 7, ACI, PCI, AISC, NDS, and TMS, • Experience in design and detailing of various construction materials, including steel, cold formed metal framing, conventional and post-tensioned concrete, concrete masonry, and conventional and engineered wood, • Experience in the design and analysis of building structures, • Registered P.E. in the state of Texas, • Bluebeam, Autodesk REVIT, RISA, or RAM Structural System experience is a plus.

Job Description Job description Reynolds Asphalt is a family-owned company that has been in business since 1981. Here at Reynolds Asphalt and Construction, we pride ourselves on our ability to deliver high-quality service and value to our clients by utilizing the talents of our team members. Do you enjoy meeting challenges and exceeding expectations? You may find that you would like to come grow with an established company with a vision for the future like Reynolds Asphalt and Construction. RAC offers competitive wages, solid benefits, and a great work environment. Come JOIN OUR TEAM and help us make our roads better! Some of our Benefits · 100% health insurance paid by employer for employee available · Health insurance deductible reimbursement plan available · 401k Matching available · Longevity awards and Profit sharing bonuses available Job Summary: The Equipment Operator: will operate heavy machinery for construction, demolition, or excavation projects. Duties/Responsibilities: · Operates construction, excavation, hauling, and maintenance equipment including backhoes, front-end loaders, bulldozers, excavators, or grade tractors. Experienced stabilization/Asphalt equipment operators · Prepares construction sites for building, demolition, or excavation. · Uses excavating machinery to dig holes and trenches used in structural concrete. · Transports tools and other construction equipment to and from construction sites. · Uses equipment to prepare building sites for exterior site concrete such as parking lots, driveways, sidewalks, and loading docks. · Operates machinery used to build bridges, roads, and railroads. · Inspects and fuels vehicle prior to beginning shift. · Performs routine maintenance and repairs. · Performs other related duties as assigned. Required Skills/Abilities: · Extensive knowledge of heavy machinery operation and capabilities. · Ability to read building plans related to structural concrete and land grades. · Excellent mechanical skills. · Ability to follow instructions. Education and Experience: · High school diploma or equivalent experience. · On-the-job training offered. Physical Requirements: · Prolonged periods of operating heavy machinery. · Able to work long periods including evenings and weekends when necessary. · Must be able to operate machinery in all weather conditions and terrains. · Must be able to lift 25 pounds at a time. Requirements: · Successful completion of pre-employment substance abuse screen Supervisory Responsibilities: · None Job Type: Full-time Salary: $18.00 - $25.00 per hour Benefits: · 401(k) · 401(k) matching · Dental insurance · Health insurance · Life insurance · Referral program · Retirement plan · Vision insurance Schedule: · 12 hour shift · Day shift · Overtime · Weekend availability Education: · High school or equivalent (Preferred) Experience: · Construction Experience: 1 year (Preferred) · Excavator: 1 year (Preferred) License/Certification: · Driver's License (Preferred) Work Location: Multiple locations Please be advised that we are not accepting inquiries from placement firms. Thank you. Reynolds Asphalt and Construction does not accept unsolicited resumes, candidates’ names or summaries from staffing agencies, search firms, or third-party recruiters. Any unsolicited resumes, candidates’ names or summaries submitted to Reynolds Asphalt and Construction, or any of its employee-owners, become the property of Reynolds Asphalt and Construction and will not pay a placement fee. Powered by JazzHR 2nsDrJ0DR6

Job Description Essential duties include, but are not limited to: • Oversee the quality of products sold to customers and assure that quality standards conform to state regulations and Company expectations., • Organize, upkeep, and maintain back stock in good order and easily accessible., • Understand and recognize the different parts of meat products sold to customers, and the different techniques that can be used to cook the products., • Package, weigh and price Meat department merchandise., • Maintain overall department appearance and replenish display cases., • Follow established Weights and Measures procedures (tares) mandated by the state., • Suggest Company products and services to customers., • Operate equipment and machinery such as baler, forklift, etc. based on operational needs., • Minimum of 2 years in a Meat customer service role required., • High school diploma/GED required or equivalent work experience, • College coursework preferred, • Must be 18 years of age, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals, • Ability to write routine reports and correspondence, • Ability to speak effectively after groups of customers or employees of organization, • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form, • Ability to deal with problems involving several concrete variables in standardized situations, • Bilingual (English and Spanish) highly preferred, • Work well with others in a team oriented environment where one willingly takes on additional tasks with a positive attitude to help out the team/department., • Knowledge of principles and processes for providing customer services - this includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction, • Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems., • Requires regular attendance and/or physical presence at the job, • Fast paced, high volume, detail oriented work environment, • Exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; and toxic or caustic chemicals, • The noise level in the work environment is usually moderate, • Occasionally requires the ability to move, lift, carry, pull or push heavy objects or materials., • Lift up to 50 pounds unassisted., • Requires extensive use of hands, • Reach above and below shoulder height, constant walking, standing in one place for long periods of time, bending, stooping, lifting, etc., • Work in hot and cold environments., • Follow company health and safety rules and wear protective equipment when and where applicable., • Safely use food handling and sanitation chemicals and equipment to maintain department cleanliness standards and local, State and Federal agencies regulations and requirements.

Job Description For more than 75 years, Speed Fab-Crete has been a trusted name in construction, delivering high-quality projects and long-standing relationships in the community. We are looking for a motivated Assistant Project Manager to join our team. This is an excellent opportunity to grow your career with a company that has built a reputation for excellence and stability. Responsibilities: • Plan, coordinate, and oversee commercial construction projects., • Collaborate with clients, subcontractors, vendors, and field staff., • Track project schedules, budgets, submittals, and change orders., • Provide support to senior PMs with documentation, progress tracking, and reporting., • Experience in construction project management or as an assistant PM preferred., • Strong organizational skills and attention to detail., • Ability to read and interpret construction drawings and specifications., • Proficiency with project management software and Microsoft Office., • Excellent communication and problem-solving skills., • Be part of a company with 75+ years of proven success., • Competitive salary (based on experience)., • Benefits package (health, retirement, PTO, etc. if applicable)., • Opportunities for professional growth and advancement. Thank you for your interest in Speed Fab-Crete. You will be a part of a great team! Company DescriptionSpeed Fab-Crete is a design/build general contractor and precast concrete manufacturer based in Fort Worth, Texas. The company has been in operation since 1951 and specializes in auto dealerships, public buildings, schools, churches, and commercial/industrial facilities. Speed Fab-Crete is one of the most sought-after general contractors in Texas and is ranked by Engineering News-Record-Texas & Louisiana magazine among the state’s top 125 contractors. The company offers an award-winning work environment and is dedicated to providing exceptional service to our clients. For more information, please visit or Fab-Crete is a design/build general contractor and precast concrete manufacturer based in Fort Worth,\r\nTexas. The company has been in operation since 1951 and specializes in auto dealerships, public buildings,\r\nschools, churches, and commercial/industrial facilities. Speed Fab-Crete is one of the most sought-after general\r\ncontractors in Texas and is ranked by Engineering News-Record-Texas & Louisiana magazine among the state’s\r\ntop 125 contractors. The company offers an award-winning work environment and is dedicated to providing\r\nexceptional service to our clients. For more information, please visit or\r\n.

Job DescriptionDescription: Join Our Team at Exceptional Emergency Center Locations: Fort Worth! Are you looking for an exciting career in emergency medicine? Exceptional Emergency Center offers a dynamic, fast-paced work environment with top-tier benefits, competitive pay, and amazing incentives! Join a team that values compassion, excellence, and teamwork while providing high-quality emergency care to the North Houston community. Why Work with Us? • Competitive Pay & Shift Differentials, • Sign-On & Retention Bonuses, • Flexible Scheduling Options, • Comprehensive Benefits & 401(k) Matching The Radiology Technologist will operate radiographic equipment to produce radiographs of the body for diagnostic purposes, as directed by the ER Physician by the Radiologist accepted protocol. The technologist will also be proficient in the positioning of the patient and the examining table to obtain optimum views of the specified area of the body requested by physician. Technologist will also practice radiation safety techniques with the ALARA principle in mind, using beam restrictive devices, patient shielding skills, and knowledge of applicable exposure factors, to maximize radiation protection to patient and staff. Each technologist will operate CT SCAN equipment to produce Computed Tomography (CT scans) of the body for diagnostic purposes, as directed by the ER Physician in accordance with the Radiologist protocol. Technologist will be responsible for administering and consenting for contrast both IV and oral, while being aware of all possible reactions and side effects. The Technologist will also be responsible for filling out appropriate paperwork and ensuring proper documentation in patients' chart. Our Primary goal is to ensure patient safety and satisfaction, while acquiring an acceptable exam of diagnostic quality. Essential Duties and Responsibilities • Maintains awareness of all departmental and operational policies of NEC., • Assists in the maintenance of all equipment in the department, including cleaning and QA procedures., • Explains to Patients the benefits and risks of Procedures and Exams., • Prepares Patient as necessary for examination, i.e.: contrast, proper IV placements, checking labs., • Facilitates departmental operations through completion of all appropriate Contrast, Extravasations, Pregnancy, and other forms related to preformed exam., • Maintains safety precautions to minimize radiation exposure to patients, other personnel, and self., • Maintains current knowledge of Diagnostic Radiology /CT procedures performed in the Radiology Department., • Possesses basic knowledge of anatomy and physiology required to apply principles of radiology and methods of exposure to obtain Diagnostic quality images., • Possesses basic knowledge of radiology/CT equipment functioning to provide for minor repair and trouble-shooting for problems., • Proficient in the utilization of all radiological/lab equipment of the ER., • Utilizes appropriate body mechanics in moving/lifting patients and equipment to prevent injury to patients and to self., • Applies principles of radiology safety in the performance of position responsibilities., • Maintains awareness of own limitations and seeks guidance from appropriate personnel when needed., • Ensures that problems/concerns regarding activities in the department are communicated with appropriate personnel., • Provides safe transportation of patients to and from the patient care unit., • Maintains awareness of all departmental and operational policies of NEC.Requirements: Supervisory Responsibilities: None Qualifications • Graduate of an accredited approved school of Radiologic Technology, • Ability to read and comprehend simple instructions, short correspondence, and memos., • Ability to write simple correspondence., • Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization, • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Ability to compute rate, ratio, and percent and to draw and interpret bar graphs, • Registered with the American Registry of Radiologic Technologists, • Current State licensure, • Current BCLS Certification Texas Requirements: ARRT (R) (CT) and TDH/TMB Colorado and Rhode Island Requirements: ARRT (R) (CT)

Job Description The Payment Integrity Analyst is responsible for accurately reviewing pre and post pay claim audits based on client, policy, industry standards and/or CMS guidelines. This is a remote position. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: • Reviews, analyzes, and completes internal audits and/or appeals in accordance with client policy, CMS guidelines and industry standards in clear and professional written communication., • Ability to use clinical judgement and analytical skills to appropriately review documentation submitted for claim audits., • Utilize clinical judgement to appropriately interpret and apply client policies along with CMS guidelines as it relates to reviews done by CERIS such as itemized bill, DRG and/or specialty audits., • Utilize applicable tools and resources to complete internal audits and/or appeals., • Timely completion of internal audits and/or appeals., • Attends Clinical Team Meetings, All Company Meetings, Education Opportunities, Trainings, and other potential meetings, • Additional duties as assigned. KNOWLEDGE & SKILLS: • Ability to demonstrate understanding of CMS and commercial payer policy in written and verbal format, • Strong understanding of claims processing, ICD-10 Coding, DRG Validation, Coordination of Benefits, • Strong understanding of healthcare revenue cycle and claims reimbursement, • Proficient in Microsoft Office including Pivot Tables and Database Management, • Comfortable interfacing with clients and the C-Suite, • Demonstrate ability to manage multiple projects, set priorities and adhere to committed schedule, • Strong interpersonal skills and adaptive communication style, complex problem solving skills, drive for results, innovative, • Excellent written and verbal communication skills, • Proven track record of delivering concrete results in strategic projects/programs, • Strong analytical and modeling ability and distilling data into actionable results, • Superb attention to detail and ability to deliver results in a fast paced and dynamic environment EDUCATION/EXPERIENCE: • Must maintain a current LPN, LVN and/or RN licensure, • Preferred experience with health insurance denials and/or appeals, payer audits, or vendor audits, • Previous experience in one or more of the following areas required:, • Medical bill auditing, • Experience in the acute clinical areas of facilities in O.R., I.C.U., C.C.U., E.R., Telemetry, Medical/Surgical, OB or L&D, Geriatrics and Orthopedics, • Knowledge of worker's compensation claims process, • Prospective, concurrent and retrospective utilization review, • Bachelor’s degree in healthcare or related field preferred, • 1+ years healthcare revenue cycle, • 1+ years of relevant experience or equivalent combination of education and work experience, • 1+ years hospital bill audit PAY RANGE: CorVel uses a market based approach to pay and our salary ranges may vary depending on your location. Pay rates are established taking into account the following factors: federal, state, and local minimum wage requirements, the geographic location differential, job-related skills, experience, qualifications, internal employee equity, and market conditions. Our ranges may be modified at any time. For leveled roles (I, II, III, Senior, Lead, etc.) new hires may be slotted into a different level, either up or down, based on assessment during interview process taking into consideration experience, qualifications, and overall fit for the role. The level may impact the salary range and these adjustments would be clarified during the offer process. Pay Range: $63,902 – $96,662 A list of our benefit offerings can be found on our CorVel website: CorVel Careers | Opportunities in Risk Management In general, our opportunities will be posted for up to 1 year from date of posting, or until we have selected candidate(s) to fulfill the opening, whichever comes first. About CERIS CERIS, a division of CorVel Corporation, a certified Great Place to Work® Company, offers incremental value, experience, and a sincere dedication to our valued partners. Through our clinical expertise and cost containment solutions, we are committed to accuracy and transparency in healthcare payments. We are a stable and growing company with a strong, supportive culture along with plenty of career advancement opportunities. We embrace our core values of Accountability, Commitment, Excellence, Integrity and Teamwork (ACE-IT!). A comprehensive benefits package is available for full-time regular employees and includes Medical (HDHP) w/Pharmacy, Dental, Vision, Long Term Disability, Health Savings Account, Flexible Spending Account Options, Life Insurance, Accident Insurance, Critical Illness Insurance, Pre-paid Legal Insurance, Parking and Transit FSA accounts, 401K, ROTH 401K, and paid time off. CorVel is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. #LI-Remote

Job Description Title: Field Engineer Exemption Status: Exempt About the Role Reporting to the Superintendent, this position is primarily responsible for performing line and grade, control points, quality review, and quality control on a project to satisfy Linbeck’s commitment to the client with regard to schedule, cost, and quality. This position also monitors and provides general guidance to survey crew in establishing the controlling line and grade, plumb, and square of all aspects of each project. Skills & Qualifications • 5 – 7 years of experience in commercial construction related survey work, • 2 years of post-secondary education including geometry, coordinate geometry, and trigonometry, • Successful completion of one or more projects as Party Chief in Training or Party Chief, • Knowledge of various construction methods and procedures, including but not limited to steel or concrete structures, post tension, tilt wall methods, • Fully knowledgeable in the use of current survey equipment and technology, • Strong technical skills, including but not limited to CAD Software, Bluebeam, BIM 360, Excel Primary Duties • Plan and coordinate activities of the survey crew with the overall project schedule, regardless of size or complexity of project, • Supervise, train, and develop survey crew personnel, • Interpret and understand construction plans and drawings, • Obtain correction information from project staff to effectively execute work, • Maintain an Engineer’s Field Book or an equivalent record of built job conditions and record drawings of the work, • Perform work with an emphasis on safety, qualify, productivity, and product, • Implement Lean Principles Physical Requirements Must be physically fit enough to function safely on a project site and office setting. This includes the following: • Prolonged periods sitting at a desk and working on a computer with repetitive movements, • Ascends or descends ladders, scaffolding, and steep slopes with agility (Climb), • Maintains body equilibrium to prevent falling from precarious situations (Balance), • Lowers the body to floor level and move with agility (Stoop or Crawl), • Extends out and retrieves objects outside immediate range (Reach), • Supports oneself and stays in an upright position (Stand), • Presses against something with substantial and steady force to thrust forward, downward, or outward (Push), • Exerts a considerable force to draw, drag, haul, or tug objects in a sustained motion (Pull), • Raises substantial objects from a lower to a higher position or moves objects horizontally from position to position (Lift), • Maneuvers small objects precisely by whatever means (Pinch or Pick), • Seizes an object by applying considerable force (Grip), • Detects attributes of objects, such as size, shape, temperature, texture, tension, or force by tactile means (Feel), • Expresses or exchanges ideas through spoken word (Speak), English preferrable., • Perceives the nature of sound with no less than a 40db loss @ 500 Hz, 1,000 Hz, and 2,000 Hz with or without correct (Hear), • Is subject to substantial repetitive motions of the body and or its parts, • Must have good depth perception, field of vision, near acuity, • Frequently exposed to weather (occasionally extreme cold, extreme heat, wet, and/or humid, exposure to dust and fumes, and working in highly exposed places) Additional Requirements • Current driver’s license, required., • Work on-site at a main office or project location, required, • May be called after hours and on weekends to address delays, emergencies, bad weather, and other issues at the jobsite, • May require travel Linbeck Group and its affiliates are committed to maintaining a working environment that encourages mutual respect, promotes respectful and productive relationships between co-workers, and is free from all forms of prohibited harassment or discrimination of any Employee or applicant for employment by or against any person, including supervisors, co-workers, temporary or seasonal workers, vendors, or customers. As a result, the Company prohibits any form of harassment or discrimination because of race, color, religion, sex, pregnancy, sexual orientation, age, national origin, physical or mental disability, or any other basis protected by federal, state, or local law.

Job DescriptionThe work schedule for this position is Monday-Thursday, 6:30 a.m. to 3:30 p.m. Position Function - Under the direction of the Street/Drainage Supervisor, performs duties necessary to support the Street/Drainage division to ensure the proper construction, repair, and maintenance of streets, roadways, bridges, sidewalks, curbs, gutters, storm drainage systems, and right-of-ways. Performs as the lead heavy equipment operator. Essential Duties% of Performance Performs assigned duties necessary to support the Street/Drainage Division by ensuring the proper construction, repair, and maintenance of streets, roadways, bridges, sidewalks, curbs, gutters, storm drainage systems, and rights-of-way. Duties include but are not limited to: daily pre-use inspection of heavy equipment; preparation and loading of necessary materials for heavy equipment operation; safe, efficient operation of heavy equipment; and daily post-use maintenance and inspection of heavy equipment. Responsible for ensuring work site safety and traffic control by setting up work site within rules/regulations/SOP's, and appropriate usage of equipment.80% Performs duties necessary to support the Streets and Drainage division by assisting crews with manual labor, responding to after hour calls and during emergency situations, and performing minor repairs and maintenance on various equipment and vehicles. May be required to assist other City departments. Performs all duties assigned to the crew he/she leads to include, but limited to: manual labor, heavy equipment operations, etc.15% Performs additional duties as assigned.5% Total:100% Physical DemandFrequency BalancingF BendingF CarryingF ClimbingF LegendCrawlingO CrouchingO C - ContinuousFine DexterityF Foot ControlsF F - FrequentlyHandlingF HearingC O - OccasionallyKneelingO LiftingF R - RarelyPushing/PullingF Reaching F N - NeverStandingF SittingF StoopingF TwistingF VisionC WalkingF Physical Demand Descriptions(The following descriptions are provided as an example of potential physical and/or sensory activities and does not address the potential for reasonable accommodation; it is intended as general examples of possible physical/sensory demands that might occur during the performance of the position functions/duties, and are not intended to be all inclusive.)Bending/Stooping/Twisting - set-up/tear-down worksite, construction, trash/debris removal, digging/shoveling, trenching, concrete/asphalt work, manual/physical labor, etc. Climbing/Balancing - Ladders, stairs, heavy equipment, vehicles, uneven terrain, etc.Fine Dexterity - phone, tools, equipment, tools, controls, etc.Foot Controls - driving, operation of equipment, manual labor, uneven terrain, etc.Hearing - phone, two-way radio, traffic, communication with co-workers, supervisor, and customers, etc.Kneeling/Crouching/Crawling - set-up/tear-down worksite, construction, trash/debris removal, equipment maintenance/repair, manual labor, etc.Lifting/Carrying/Pushing/Pulling/Reaching/Handling - Up to 100lbs - work aids, equipment, tools, materials, set-up/tear-down worksite, construction, trash/debris removal, concrete/asphalt work, etc.Standing - Concrete/asphalt work, trash/debris removal, setting up/tearing down work area, etc.Talking - Communication with co-workers, supervisor, and customers, two-way radios, phone, etc.Vision - driving, equipment, hand tools, power tools, etc. Walking - to and from shop, to and from buildings, at worksite, trash/debris removal, concrete/asphalt work, uneven terrain, etc.Machines, Tools, Equipment and/or Work Aids(The following list is intended to provide examples of possible machines, equipment, tools and/or work aids that might be needed to perform position functions/duties and should not be construed as a comprehensive or complete catalog. This list does not include and does not supersede any requirements with respect to safety or protective equipment, uniforms, apparel, gear or apparatuses required for the performance of any duties described herein.)Heavy equipment, vehicle, hand-held and power tools and equipment, hard hat, safety and/or protective clothing (e.g., hardhat, goggles, gloves, ear, etc.), steel-toed or composite-toed safety boots/shoes, mobile communication devices, etc.EnvironmentDuties are performed primarily within an outdoor environment or setting. Possible exposure to electrical and chemical hazards, water, sewage, vibrations, loud noise, inclement weather, dust, allergens, and mold.Requirements/Knowledge/Skills/AbilitiesRequired knowledge and experience is normally obtained through the completion of a curriculum resulting in either a High School diploma or GED, and a minimum of two (2) years of work experience in Transportation Construction or a related field is required.Valid State of Texas Class A CDL is required. Ability to establish and maintain effective working and professional relationships with City employees and officials, and the general public.Ability to take and follow oral instructions, as well as hand signals.Ability to work under high demands, short time constraints, and the pressure of a fast-paced work environment.Ability to properly operate heavy equipment.Thorough knowledge of construction methods, materials and practices with particular emphasis on transportation and/or utility construction and repair. Thorough knowledge of workplace safety practices and procedures, including but not limited to: lockout/tagout, traffic safety, spotting, etc.Must be able to work "on-call" or emergency hours.Must be able to work outside normal business hours. Must exhibit attention to detail, accuracy, and safety.Must be able to communicate and present oneself in a professional manner.Must be able to understand and comprehend technical instructions and manuals.Must pass all post offer pre-employment processes and/or procedures, to include but not limited to Drug Screen, Physical Examination, and applicable Background Checks.

Job Description Who We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. The Role We are seeking a skilled and knowledgeable Civil Technician to join our team. Civil Technicians help support civil engineering projects by assisting the design, construction inspection, and maintenance. Our ideal candidate is self-motivated, goal-oriented, and driven to accomplish department goals. This is an opportunity for a long term position and to join a growing company. Responsibilities • Setting forms that hold concrete in place, • Cleaning and inspecting surfaces for pouring issues, • Pouring, smoothing, and leveling concrete using a trowel and float., • Ability to safely maneuver equipment trailers, • Restoration of areas where work has been performed (leveling, seed and straw), • Maintain a clean and safe jobsite, • Ability to safely operate equipment (Mine excavators, Telehandlers, Skid Steers), • Possess basic computer skills including word, excel & email, • Must be willing to travel nationwide up to 85% of the time, • Possess a valid driver’s license with a good driving record, • 3 years’ experience as a concrete finisher, • Excellent verbal and written communication skills, • Strong team player with the ability to adapt to diverse team members, • Exceptional time management, accountability, and prioritization skills, • Self-motivated, goal- oriented, and driven to accomplish department goals, • Able to support a fast paced, demanding work schedule; including occasional late evenings and/or weekends when requested, • Ability to work in a variety of physical positions, like sitting, squatting, standing, walking, and driving, • Endurance of regular exposure to all weather conditions including heat, cold, humidity, and rain during all seasons throughout the year, • Ability to be exposed to uncomfortable or distracting sounds or noise levels on sites of projects being managed or coordinated, • PTO, • 401(k) match, • Health, dental, vision, and life insurance Requisition #3290

Job Description We are seeking a Production Supervisor for 2nd shift (2:30pm – 11:30pm Monday - Friday) to join our dynamic team at Petmate. The Production Supervisor is responsible for overseeing the daily operations of the manufacturing plant. This role involves managing production schedules, ensuring quality standards are met, and coordinating with various departments to optimize workflow. The Production Supervisor leads a team of production workers, providing guidance and support to achieve production targets. Additionally, the role includes monitoring equipment performance, implementing safety protocols, and driving continuous improvement initiatives to enhance efficiency and productivity. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Optimize customer service through teamwork and communication., • Perform team management duties, including coaching, training, disciplinary actions, safety practices, scheduling, and motivating., • Drive production improvements to meet department OEE goals., • Ensure scheduled products are produced to specifications., • Oversee and maintain high levels of housekeeping., • Meet daily with off going and oncoming supervisors to ensure priorities are met., • Plan and coordinate labor distribution, adjusting work assignments and schedules in response to fluctuating production needs, and working closely with HR for staffing requirements., • Supervise, evaluate, promote, and enforce compliance with company safety policies, rules, and procedures., • Ensure employees have the necessary training, tools, equipment, and information to meet production expectations., • Manage daily labor efficiencies, downtime, scrap, and part quality., • Oversee payroll, break schedules, and vacations for the shift., • Implement visual workplace principles through Lean Six Sigma., • Other duties as assigned. Supervisor Responsibilities: • Directly supervises employees in the Production Department., • Carries out supervisory responsibilities in accordance with the organization’s policies and applicable laws., • Responsibilities include interviewing, hiring and training employees; planning, assigning, and directing work; appraising performance, rewarding and disciplining employees; addressing complaints and resolving problems. SKILLS AND EXPERIENCE: • Be a leader who can motivate, train, drive accountability, and be flexible enough to adapt to change., • Experience in station layout designs and single piece flow., • Understanding our metrics of OEE, Scrap, Safety, and Quality, • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to read, write, and speak English effectively before groups of customers or employees of organization., • To perform this job successfully, an individual should have knowledge of database software; spreadsheet and word processing Microsoft Office software; Mattec and Oracle., • Teamwork: Balances team and individual responsibilities; exhibits objectivity and openness to others' views; gives and welcomes feedback; contributes to building a positive team spirit; puts success of team above own interests; able to build morale and group commitments to goals and objectives; supports everyone's efforts to succeed., • Planning/Organizing: Prioritizes and plans work activities; uses time efficiently; plans for additional resources; sets goals and objectives; organizes or schedules other people and their tasks; develops realistic action plans., • Professionalism: Approaches others in a tactful manner; reacts well under pressure; treats others with respect and consideration regardless of their status or position; accepts responsibility for own actions; follows through on commitments., • Quality: Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality., • Quantity: Meets productivity standards; completes work in a timely manner; strives to increase productivity; works quickly., • Safety and Security: Observes safety and security procedures; determines appropriate action beyond guidelines; reports on potentially unsafe conditions; uses equipment and materials properly., • Adaptability: Adapts to changes in the work environment; manages competing demands; changes approach or method to best fit the situation; able to deal with frequent change, delays, or unexpected events., • Attendance/Punctuality: Is consistently at work and on time; ensures work responsibilities are covered when absent; arrives at meetings and appointments on time., • Dependability: Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan., • Initiative: Volunteers readily; undertake self-development activities; seek increased responsibilities; takes independent actions and calculated risks; looks for and takes advantage of opportunities; asks for and offers help when needed., • Innovation: Displays original thinking and creativity; meets challenges with resourcefulness; generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others' attention., • Language Skills: Ability to read, write, and comprehend simple instructions, short correspondence, and memos in English. Ability to effectively present information in one-on-one and small group situations with vendors and other employees of the organization., • Reasoning Ability: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Education and Experience: • High School diploma or General Education degree, • 5 years of supervisor experience and capable of supervising 140 plus people in multiple departments., • Plastic injection molding experience a plus. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to stand and walk. The employee is occasionally required to sit. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly required to talk and listen. WORK ENVIRONMENT: Our facility operates with machinery that can be loud and requires ear protection and eye protection. The manufacturing environment can be fast-paced and physically demanding, with exposure to various materials and processes that may result in a dirty workspace. We prioritize safety and cleanliness, providing all necessary protective gear and maintaining strict hygiene standards. Despite the challenging conditions, we foster a collaborative and supportive atmosphere where teamwork and professional growth are highly valued. 2nd Shift; 2:30pm – 11:30pm Monday - Friday

Job Description "Together, we transform lives and communities!" National Community Renaissance (CORE) is seeking an Apartment Maintenance Supervisor (aka Resident Services Supervisor) to join our Property Management team. CORE is one of the nation's largest non-profit affordable housing developers with over a 30 year track record in community revitalization. We transform the economic and social future of communities by building quality, affordable housing combined with best practice social services to improve the self-sufficiency of our residents. Benefit Summary: National Community Renaissance offers a comprehensive benefit package including, medical, dental, vision, 401(k) plan with match, Life Insurance, LTD, FSA, paid holidays, vacation, and sick time. About the Job: The Resident Services Supervisor reports to the Community Manager and is responsible for the overall maintenance of the physical site and supervision of entire Resident Services team. RESPONSIBILITIES • Work closely with Community Manager to maintain integrity of property within established budget., • Over site of all maintenance projects., • Supervise and assist in all maintenance issues including, but not limited to, electrical repairs, plumbing repairs, carpentry work, custodial work and concrete, masonry, roofing fencing and signage when needed., • Perform touch-up painting, interior and exterior, as needed., • Perform carpentry work, such as fitting doors, freeing windows, replacing and building shelves, sanding and refinishing floors., • Train subordinate employees., • Monitor all incoming after-hour emergency calls and participate as needed., • Be responsible for inventory control and utilization of maintenance materials., • Keep storage/maintenance shop facilities and equipment clean and in orderly working condition., • Schedule subordinate maintenance personnel and work order requests, adhering to maintenance priorities., • Ensure that work orders were completed within 24 hours, unless otherwise stipulated, and all needed follow-up or scheduling is accomplished in a timely manner., • Assist in scheduling and completing apartment inspections, including annual and turnover inspections., • Be responsible for the refurbishing of apartments prior to resident occupancy., • Keep accurate records regarding preventive maintenance, work orders, apartment refurbishing, annual inspections, inventories, purchase orders., • Perform scheduled maintenance on all equipment based on the manufacturers' recommendations and operating manuals., • Periodically inspect all units, buildings, and common areas, performing repairs and janitorial assistance as needed., • Have knowledge regarding water and gas meter shutoffs, all apartment and fixture shutoffs, sewer cleanouts and post map of the same., • Make sure storage areas and entrances are locked and adequate lighting in those areas is maintained as well as throughout common areas of property., • Have constant knowledge regarding contracts and vendors, their services and goods., • Negotiate with vendors to ensure best pricing on services and goods., • Responsible for Performance Reviews and disciplinary action process for subordinate employees., • Responsible for execution and record keeping of Preventive Maintenance Program., • Must be conscious of a safe work environment., • Assist in Resident Services Training programs., • Must have current license and be insured to drive for company business., • Must have home telephone and inform supervisor of current phone number., • Work with the Capital Improvement Manager to plan and implement all capital improvement projects., • Ensure compliance with all MSDS books, labeling of bottles and other materials., • Must attend Company sponsored events that relate to the development of the team, which, from time to time, may include overnight stays at locations away from the employee's home., • Other duties as may be needed or required at the request of the Community Manager or other supervisors. SKILLS • Must possess ability to serve as a resource to others in the resolution of complex problems and issues., • Relies on experience and judgment to plan and accomplish assigned goals. May orient, train, assign and check the work of lower-level employees., • Ability to work with and understand persons of all ethnic and family backgrounds., • Must demonstrate initiative, professionalism, integrity and exercise confidentiality in all areas of performance., • Must be able to read and speak English or read and speak English and Spanish, as appropriate to the resident base, in order to effectively communicate between the Resident Services Technician and residents as well as between Resident Services Technician and co-workers and supervisors., • Concern for work-safety program., • Maintain work pace appropriate to given workload., • Perform complex and varied tasks., • Relate to others beyond giving and receiving instructions., • Basic budgeting knowledge and understanding., • Ability to forecast future projects and forward plan., • Be a team player. EXPERIENCE The Resident Services Supervisor should have the following minimal knowledge, skills and abilities: • Three or more years of experience in resident services and maintenance or related field., • Two to three years supervisory experience., • Must be HVAC Certified., • High school education or equivalent is needed or a combination of 3+ years relevant work experience and technical certifications. PHYSICAL REQUIREMENTS/WORK ENVIRONMENT • Exposure to various types of weather., • Standing, walking, • Pushing/pulling, • Crawling/kneeling, • Twisting/carrying, • Working with hands, • Driving - must have a valid driver's license and updated automobile insurance in order to drive for business purposes., • Operate computer and office equipment. FSLA: Non Exempt Pay: $29.50 - $30.05/hr National Community Renaissance is an equal opportunity employer. Job Posted by ApplicantPro

Job Description Position Title: Loan Services Supervisor FSLA Status: Non-Exempt Reports to: Loan Operations Manager Location: Tyler Operations or Fort Worth Benefits: • Medical, Prescription Drugs, Dental, and Vision Insurance, • Insurance Eligibility for Team Members and Dependents Starting on the First Day of Employment, • 401(k) with a Match, • Basic, Voluntary, and Dependent Life Insurance, • Paid Time Off, • Paid Bank Holidays, • Workplace Wellness Programs, • Employee Assistance Programs Essential Functions • Develops, recommends and administers goals, objectives and priorities concerning the proper functioning of the Loan Services and Collateral Administration Departments including all functions and activities., • Oversees evaluates, monitors, and reports on the effectiveness of all aspects of Loan Services and Collateral Administration activities, including participation and syndications, booking, payment processing, reconciliation of loan general ledgers, exception tracking, force placed insurance for both hazard and flood policies, file review and compliance of audit and regulatory requirements as it pertains to the servicing of loans., • Assists with system parameters and design to meet the needs of multiple departments., • Reviews Bank loan reports; recommending and implementing methodologies to improve overall loan services activities and productivity., • Analyzes, tests and trains employees for periodic software updates, and verify enhancements are working correctly., • Interviews, hires, and trains employees, planning, assigning, directing work and employee performance management. Advises in the development, implementation, and administration of operational programs, processes, and procedures for optimal effectiveness and achievement of organizational goals and objectives, as well as to ensure that the Loan Services and Collateral Administration Departments maintain and enhance productivity., • Reviews and recommends solutions to complex problems referred to by subordinates, requiring good judgment and frequent on-the-spot decisions., • Ensures proper documentation of all departmental controls and procedures; ensures cross-checks within department for accuracy and compliance to policy and procedure, as well as applicable regulations., • Authorizes exceptions to Loan Services and Collateral Administration procedures, when warranted and justified., • Maintains a thorough and up-to-date knowledge of Bank policies and procedures, regulations, and servicing laws., • Coordinates and assists with the training of department personnel to meet present and future operational requirements., • Assigns work duties to team members., • Maintains positive relationships and promotes efficiency among a group of workers., • Plans and supervises the activities of others., • Maintains confidentiality of all sensitive Bank information., • Maintains a positive and caring atmosphere for customers and employees consistent with Southside Bank’s mission, CORE Values, and Blue Book culture guide., • Provides enthusiastic, professional, and courteous service to Southside Bank customers and employees., • Participates in proactive team efforts to achieve departmental and company goals., • Understands and agrees to abide by the policies and procedures established at Southside Bank., • Responsible for complying with audit policies and procedures as they pertain to this position., • Performs duties in compliance with applicable laws and regulations, including but not limited to the Bank Secrecy Act (BSA) and related anti-money laundering laws, and in accordance with the Bank’s Information Security Program., • Provide leadership to others through example and sharing of knowledge/skill., • Complies with all safety policies, practices, and procedures. Report all unsafe activities to supervisor and/or Human Resources., • High School diploma or general education degree required., • Minimum Five (5) or more years of loan operations experience; prefer bachelor’s degree in business administration, finance or related area., • Four or more years of supervisory experience is required., • Knowledge of Jack Henry Silverlake core system and nCino workflow a plus., • Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents., • Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community., • Ability to effectively present information to top management., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals., • Ability to compute rate, ratio, and percent and to draw and interpret bar graphs., • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Ability to interpret a variety of instructions furnished in written, oral diagram, or schedule form., • Proficient personal computer skills including electronic mail, record-keeping, routine database activity, word processing, spreadsheet, graphics, etc., • Must be able to remain in a stationary position 90% of the time., • The person in this position needs to occasionally move about inside the office to visit other offices, conference rooms, office machinery, etc., • Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine, and telephone., • Constantly positions self to operate on a computer., • Well-lighted, heated and/or air-conditioned indoor office setting with adequate ventilation., • Monday through Friday; 8:00am – 5:00pm. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)

Job Description We are growing and are looking to add a Project Coordinator that will support projects in Texas and Oklahoma. This is a full-time position with a Monday to Friday schedule and will be provided with great benefits. The ideal candidate will have construction experience in an administrative capacity. The role would work out of West Fort Worth. Primary Functions: The Project Coordinator is the link between the jobsite, office, and project ownership, by performing contract administration support, tracking and document control; leading the submittal, RFI and change order processes; developing subcontracts; tracking labor, materials, and equipment; and procuring permits. Required Education / Experience: • A minimum of 2 years of industry experience at a similar capacity. Duties and Responsibilities: • Develop full understanding of the scope and interdependence of all contract documents., • Manage effective document control mechanisms for the project to ensure that work is performed in accordance with contract documents., • Work with Project Manager to prepare, administer, and process subcontracts., • Work with Project Manager to evaluate change order requests including design changes, specifications and drawing releases and reports status., • Work with Project Manager to evaluate submittals of shop drawings, material data and samples and facilitates appropriate action based upon contract specifications. Responsible for input of all submittals into Contract Manager. Process and track submittals through Contract Manager for upcoming jobs., • Work with Project Manager to review and process as-built drawings to ensure that all changes during the course of construction are recorded., • Review the project schedule and assist Project Manager in the maintenance of it as requested., • Participate in schedule development related to submittals and long lead items. Prioritize contract release to meet schedule., • Manage the request for information (RFI) process to facilitate the timely exchange of information between designer, owner, and contractor., • Assist Project Manager in the maintenance of effective cost control mechanisms for the project., • Complete project close out requirements in accordance with contract documents., • Coordinate meeting agendas, prepare minutes and follow up on action items. Represent company/project in meetings with clients, subcontractors and consultants as required and directed. Ensure meeting minutes are accurate and timely., • Compose and/or edit letters, memos, reports, and procedures as required., • Work with project manager and superintendents to collect, evaluate, and approve subcontractor invoices and prepare contractor application for payment., • Track and collect payment lien releases as required., • Maintain effective and professional relationships with owners, architects, engineers, and contractors. Act as a liaison between Owners, Architect, Subcontractors, Project Management, home office management, and other departments., • Assist with bidding including the following: responsibility may include creating and verifying the subcontractor invitation list, ensuring a minimum of three subs per trade, establishing and qualifying the list of subcontractors to bid on respective jobs, distributing instruction to bidders, follow up and receipt of bids and breakdown of scope and cost., • Execute additional duties and responsibilities as assigned. Skills And Knowledge Required: • Knowledge and understanding of construction and related processes, as well as industry practices., • Knowledge and understanding of the roles and interdependence between the contractor, designer and owner., • Knowledge, thorough understanding, and management of construction documentation (contracts, change orders, submittals, RFIs, etc.)., • Excellent communication, organizational and supervisory skills., • Knowledge and understanding of construction scheduling, cost control and quality control., • Effective computer skills including proficient use of Word, Excel, Outlook, Adobe, and skills with project management and scheduling database software preferred., • Effective verbal and written communication skills, including the ability to build and maintain effective interpersonal relationships., • Ability to read and comprehend technical drawings and blueprints a plus., • Ability to demonstrate the competencies of achieving results, initiative, teamwork and analytical thinking., • Commitment to honesty, integrity, quality of work and customer satisfaction., • Must possess valid unrestricted US Driver’s license and present proof of insurance. Work Environment: • While performing the duties of this job, the employee must regularly work in an office and or construction jobsite environment., • Percentage of time in each environment will vary per assignment. Physical Requirements: • While performing the duties of this job, the employee must regularly sit, stand, walk, talk, or hear and use hands and fingers., • Frequently reach with hands and arms; occasionally climb or balance and stoop, kneel, crouch or crawl. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus., • Must frequently lift and or move 10 pounds and occasionally lift and or move up to 25 pounds. Company DescriptionStaples Construction Company, Inc. is a licensed California general contracting corporation that specializes in commercial and industrial construction projects, ranging in size from small interior tenant improvements to multi-million-dollar concrete tilt-up commercial office buildings and large distribution centers. Since the inception of Staples Construction Company in 1995, we have expanded our corporate headquarters in Ventura, CA with regional offices in Fremont, Salinas, Sacramento, and Fort Worth, TX. WE ARE AN EQUAL OPPORTUNITY EMPLOYER Construction Company, Inc. is a licensed California general contracting corporation that specializes in commercial and industrial construction projects, ranging in size from small interior tenant improvements to multi-million-dollar concrete tilt-up commercial office buildings and large distribution centers. Since the inception of Staples Construction Company in 1995, we have expanded our corporate headquarters in Ventura, CA with regional offices in Fremont, Salinas, Sacramento, and Fort Worth, TX.\r\n\r\nWE ARE AN EQUAL OPPORTUNITY EMPLOYER\r\n\r\n

Job Description Position Title: Mortgage Loan Officer Exempt Status: Non-Exempt Reports to: Director of Mortgage Lending Location: Fort Worth- University Center Benefits: • Medical, Prescription Drugs, Dental, and Vision Insurance, • Insurance Eligibility for Team Members and Dependents Starting on the First Day of Employment, • 401(k) with a Match, • Basic, Voluntary, and Dependent Life Insurance, • Paid Bank Holidays, • Workplace Wellness Programs, • Employee Assistance Programs Essential Functions: • Interviews residential mortgage loan applicants and requests information to complete a thorough loan application., • Compiles and analyzes data for residential loan applicants including credit report and automated underwriting findings., • Recommends and outlines loan options., • Coordinates with Compliance for the delivery of the Disclosure documents, • Submits completed application package to processing., • Notifies applicants of loan decision. Corresponds with customers, applicants or creditors to resolve questions for loan approval., • Provides annual production goals and monthly closing projection reports., • Understands and follows all local, state and federal laws and regulations as they apply to residential loans and security agreements., • Maintains confidentiality of all sensitive Bank information., • Maintains a positive and caring atmosphere for customers and employees consistent with Southside Bank’s mission, CORE Values, and Blue Book culture guide., • Provides enthusiastic, professional, and courteous service to Southside Bank customers and employees., • Participates in proactive team efforts to achieve departmental and company goals., • Understands and agrees to abide by the policies and procedures established at Southside Bank., • Responsible for complying with audit policies and procedures as they pertain to this position., • Performs duties in compliance with applicable laws and regulations, including but not limited to the Bank Secrecy Act (BSA) and related anti-money laundering laws, and in accordance with the Bank’s Information Security Program., • Provide leadership to others through example and sharing of knowledge/skill., • Complies with all safety policies, practices, and procedures. Report all unsafe activities to supervisor and/or Human Resources., • Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures or governmental regulations., • Ability to write information and respond to questions from groups of managers, clients, customers, and the general public., • Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume., • Ability to apply concepts of basic algebra and geometry., • Ability to define problems through collection of data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Intermediate personal computer skills, including electronic mail, routine database activity, word processing, spreadsheet, graphics, etc., • Must be able to remain in a stationary position 90% of the time., • The person in this position needs to occasionally move about inside the office to visit other offices, conference rooms, office machinery, etc., • Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine, and telephone., • Constantly positions self to operate on a computer., • Well-lighted, heated and/or air-conditioned indoor office setting with adequate ventilation., • Monday through Friday; 8:00am – 5:00pm. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)

Job DescriptionDescription: GENERAL SUMMARY Records payments to customer accounts and maintains accounts receivable records. Reconcile and deposits all monies received by the dealership. To operate within the guidelines of Ford Motor Company and the standards of Five Star Ford to build a relationship as well as create an experience for our customers rather than a transaction. Works together to create a culture where employees can LOVE their jobs and customers can LOVE our employees. Demostrates an attitude of CARING toward co-workers and customers in order for both to feel valued. ESSENTIAL DUTIES Essential Duties include the following. Other duties may be assigned. · Reconciles and deposits service and parts receipts including credit cards on a daily basis. · Ensures all monies received from vehicle sales have been receipted in by FI and processes drafts. · Post the Ford EFT and bank transaction report daily. · Maintain the cash clearing accounts and reconcile daily. · Answers accounts receivable phone calls and follow up on inquiries. · Performs background checks on credit applications. · Set up New Account Receivable accounts after Controller approves. · Cross-trains others for this position as directed by management. · Prepares accounts receivable statements monthly. · Post the Warranty JV’s, including Ford warranty credits daily. · Prepares the Free Service report. · Process NSF/Return Checks to UTA. · Maintain all A/R related schedules. · Ensures CIT accounts are cleared daily after payments have been posted · Maintains a professional appearance and a neat work area. · Completes all Ethos training in a timely manner when prompted to do so. · Receptionist relief when needed. · Assist with other functions in accounting when asked by Management. MARGINAL DUTIES Marginal Duties include the following. Other duties may be assigned. Requirements: QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. LANGUAGE SKILLS • Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.. MATHEMATICAL SKILLS • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY • Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions., • Ability to deal with problems involving a few concrete variables in standardized situations., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Ability to deal with problems involving several concrete variables in standardized situations., • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. EDUCATION and/or EXPERIENCE One or two years related experience and/or training PHYSICAL DEMANDS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DISCLAIMER The preceding job description has been designed to indicate the general nature and essential duties and responsibilities of work performed by employees within this classification. The duties described are not to be interpreted as being all-inclusive to any specific employee. Management reserves the rights to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Nothing in this position description changes the at-will employment relationship existing between Five Star Ford North Richland Hills and its employees.

Job Description The Payment Integrity Analyst (Team Lead) assists with leading the Policy and Payment Integrity (PPI) team while maintaining the regular duties and responsibilities of this role which is accurately reviewing pre and post pay claim audits based on client, policy, industry standards and/or CMS guidelines. The Team Lead must also be knowledgeable of the application of client policy and industry standards within reviews conducted by CERIS including but not limited to itemized bill review, professional review, hospital outpatient; trend analysis of internal auditing, appeals of pre and post payment claims, and any other claim or record that requires quality review to determine claim accuracy; assist with development of internal quality assurance measures based on client policy and industry guidelines; perform quality assurance reviews; assist in researching and implementing best practices related to payment policy, and/or policy initiatives; researching various healthcare policies. This is a remote position. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: • Assists with staff communication, providing updates, resolving issues, setting goals and maintaining standards as well as dialogue with team members in efforts to answer their questions and resolve barriers., • Oversees team member work for quality and compliance and communicates deadlines and productivity goals to team members while providing ongoing training and education to staff to ensure policies and procedures are followed., • Verifies and corrects as necessary, the audit work completed by PPI QC analysts and clinical appeal review teams as needed., • Reviews, analyzes, and completes internal audits and/or appeals in accordance with client policy, CMS guidelines and industry standards in clear and professional written communication., • Ability to use clinical judgement and analytical skills to appropriately review documentation submitted for claim audits., • Utilize clinical judgement to appropriately interpret and apply client policies along with CMS guidelines as it relates to reviews done by CERIS such as itemized bill, DRG and/or specialty audits., • Utilize applicable tools and resources to complete internal audits and/or appeals., • Timely completion of internal audits and/or appeals., • Attends Clinical Team Meetings, All Company Meetings, Education Opportunities, Trainings, and other potential meetings., • Ability to demonstrate understanding of CMS and commercial payer policy in written and verbal format, • Strong understanding of claims processing, ICD-10 Coding, DRG Validation, Coordination of Benefits, • Strong understanding of healthcare revenue cycle and claims reimbursement, • Proficient in Microsoft Office including Pivot Tables and Database Management, • Demonstrate ability to manage multiple projects, set priorities and adhere to committed schedule, • Strong interpersonal skills and adaptive communication style, complex problem-solving skills, drive for results, innovative, • Excellent written and verbal communication skills, • Proven track record of delivering concrete results in strategic projects/programs, • Strong analytical and modeling ability and distilling data into actionable results, • Superb attention to detail and ability to deliver results in a fast paced and dynamic environment EDUCATION/EXPERIENCE: • Must maintain a current LPN, LVN and/or RN licensure, • Preferred experience with health insurance denials and/or appeals, payer audits, or vendor audits, • Previous experience in one or more of the following areas required:, • Medical bill auditing, • Experience in the acute clinical areas of facilities in O.R., I.C.U., C.C.U., E.R., Telemetry, Medical/Surgical, OB or L&D, Geriatrics and Orthopedics, • Knowledge of worker's compensation claims process, • Prospective, concurrent and retrospective utilization review, • Bachelor’s degree in healthcare or related field preferred, • 3+ years healthcare revenue cycle or payment integrity experience, • 3+ years of relevant experience or equivalent combination of education and work experience PAY RANGE: CorVel uses a market based approach to pay and our salary ranges may vary depending on your location. Pay rates are established taking into account the following factors: federal, state, and local minimum wage requirements, the geographic location differential, job-related skills, experience, qualifications, internal employee equity, and market conditions. Our ranges may be modified at any time. For leveled roles (I, II, III, Senior, Lead, etc.) new hires may be slotted into a different level, either up or down, based on assessment during interview process taking into consideration experience, qualifications, and overall fit for the role. The level may impact the salary range and these adjustments would be clarified during the offer process. Pay Range: $70,016 – $108,106 A list of our benefit offerings can be found on our CorVel website: CorVel Careers | Opportunities in Risk Management In general, our opportunities will be posted for up to 1 year from date of posting, or until we have selected candidate(s) to fulfill the opening, whichever comes first. About CERIS CERIS, a division of CorVel Corporation, a certified Great Place to Work® Company, offers incremental value, experience, and a sincere dedication to our valued partners. Through our clinical expertise and cost containment solutions, we are committed to accuracy and transparency in healthcare payments. We are a stable and growing company with a strong, supportive culture along with plenty of career advancement opportunities. We embrace our core values of Accountability, Commitment, Excellence, Integrity and Teamwork (ACE-IT!). A comprehensive benefits package is available for full-time regular employees and includes Medical (HDHP) w/Pharmacy, Dental, Vision, Long Term Disability, Health Savings Account, Flexible Spending Account Options, Life Insurance, Accident Insurance, Critical Illness Insurance, Pre-paid Legal Insurance, Parking and Transit FSA accounts, 401K, ROTH 401K, and paid time off. CorVel is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. #LI-Remote

Job Description Key Responsibilities: Perform site preparation tasks including grading, clearing, and compacting. Install underground conduit for power and fiber (trenching, backfilling). Assist in pouring concrete foundations for equipment pads, light poles, or towers. Install grounding systems (exothermic welding, ground rings, rods, etc.). Assemble and install equipment shelters, cabinets, or other telecom enclosures. Operate construction tools and equipment (e.g., skid steers, trenchers, compactors). Maintain clean and organized work sites; follow proper disposal of materials. Assist with material handling and inventory on site. Follow safety procedures and attend daily safety briefings/toolbox talks. Perform basic documentation or reporting of work completed via photos or apps. Requirements: Education & Experience: High school diploma or GED (required). 1–3 years of civil construction experience (telecom preferred but not required). Experience operating light machinery or tools (e.g., concrete mixer, trencher, power tools). Skills & Competencies: Ability to work outdoors in various conditions and perform physically demanding labor. Basic knowledge of civil construction methods and tools. Team-oriented with good communication and work ethic. Willingness to travel and work overtime when needed. Ability to follow instructions, construction drawings, and safety protocols Preferred Certifications (can be obtained on the job): OSHA 10 or OSHA 30 Certification First Aid / CPR Competent Person (Trenching & Excavation) Forklift or skid steer certification Valid driver’s license (CDL is a plus) Working Conditions: Field work in all weather conditions. Must be able to lift 50 - 75 lbs. regularly. Frequent bending, digging, trenching, and manual labor. Travel to different wireless sites (local, regional, or nationwide depending on employer).

Job Description SUMMARY Under the general direction of the Vice President of Operations, the Safety Manager is responsible for implementing, monitoring, and supporting safety programs, policies, and procedures across all four manufacturing locations in Southern California, Northern California, Denver, CO, and Fort Worth, TX. This position ensures compliance with OSHA and other applicable safety regulations by conducting inspections, analyzing workplace risks, and promoting a safety-first culture. The Safety Manager supports hazard prevention, risk mitigation, and employee training while contributing to the continuous improvement of workplace health and safety. Bilingual in English and Spanish strongly preferred to support communication across diverse teams. ESSENTIAL DUTIES AND RESPONSIBILITIES The Safety Manager is expected to rely on their extensive experience and expertise to fulfill the functions of the role with minimal supervision. This position requires the customary and regular exercise of discretion and independent judgment in the performance of the following essential duties: • Implements and maintains company-wide safety policies and procedures in accordance with OSHA and other regulatory standards., • Conducts regular safety audits and workplace inspections across all four plant locations to identify and correct unsafe conditions., • Assists in developing and delivering employee safety training programs, including topics such as PPE, lockout/tagout, hazard communication, and emergency response., • Investigates with plant leadership on incidents, near misses, and accidents; documents findings, and recommends preventative measures., • Partners with Plant Managers and Supervisors to ensure safety procedures are consistently followed and integrated into daily operations., • Collects and maintains data on all safety events, compiles reports, and presents findings to site and senior leadership., • Supports site teams in promoting awareness of safety practices and expectations across all departments., • Evaluates workplace conditions and processes for potential risks and compliance gaps; recommends and implements improvements., • Coordinates safety-related initiatives including fire prevention, hazardous materials handling, and environmental health practices., • Maintains SDS files and ensures up-to-date documentation across sites., • Collaborates with HR, Operations, and Maintenance departments on safety-related matters and regulatory updates., • Supports continuous improvement efforts focused on safety and compliance., • Other duties may be assigned when needed. EDUCATION and/or EXPERIENCE Bachelor’s degree in Occupational Safety, Industrial Technology, Industrial Engineering, or a related field preferred. Requires 2–4 years of experience in a manufacturing safety role or equivalent combination of education and experience. SKILLS Language: Ability to read, analyze, and interpret safety regulations, technical documents, and business communications. Ability to write reports and policies. Strong presentation and communication skills with all levels of the organization. Bilingual in English and Spanish strongly preferred to support effective training and communication across sites. Computer: Proficiency in Microsoft Office Suite, including Word, Excel, and PowerPoint. Reasoning: Ability to apply concepts such as statistical analysis, rates, ratios, and percentages to interpret safety trends and data. Ability to solve complex problems and manage multiple priorities across locations. Able to interpret regulatory requirements and adapt them to operational realities. Other: Attention to detail and organizational skills are necessary. Ability to conduct instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS OSHA 30-Hour Certification required; CSP or ASP preferred. Valid driver’s license and ability to travel between locations (approximately 25-30% travel required). PHYSICAL DEMANDS While performing the duties of this job, the employee is frequently required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand, walk, and sit. The employee must occasionally lift and/or move up to 25 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. WORK ENVIRONMENT While performing the duties of this job, the employee will work on a computer and other office equipment. While visiting the plants the employee is frequently exposed to moving mechanical parts and sharp, heavy objects. The employee is occasionally exposed to fumes or airborne particles, outside weather conditions, and vibration. The noise level in the work environment may be loud when visiting manufacturing plants, otherwise an office environment and noise is expected. Final compensation will be determined based on several factors, including location, experience, and qualifications.

Job Description POSITION SUMMARY Direct and oversee all technical functions focusing on unscheduled downtime, scrap, mold changes, color changes, resin and color usage, and improvement projects. Ensures the safety of all employees. Area will be Blow Molding and Stretch Molding. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: (other duties may be assigned) • Partner with Plant Supervisors and Managers to ensure daily challenges, priorities and issues, • Meet daily with offgoing and oncoming supervisors to set priorities and reduce inefficiencies, • Collect and report on daily production data, • Manages indirect labor, scrap, and downtime to minimize manufacturing variances, • Give daily visibility on downtime, scrap, changes, and resin deviations., • Participate in daily labor meetings to identify labor inefficiencies and discuss quality topics, • Work closely with planning to coordinate major tool and machine repairs., • Partner with engineering, maintenance and operations on process optimization regarding molds, changed overs and machine improvements. SUPERVISORY RESPONSIBILITIES Indirect supervision of Process Techs and Mold Setters. Carries out supervisory responsibilities in accordance with the organization’s policies and applicable laws. Responsibilities include interviewing, hiring, training and retention of employees; planning, assigning, and directing work; appraising performance, rewarding, and disciplining employees; addressing complaints and resolving problems. Competencies: To perform the job successfully, an individual should demonstrate the following competencies: Analytical • synthesizes complex or diverse information, • collects and researches data, • uses intuition and experience to complement data, • designs workflows and procedures. Problem Solving • identifies and resolve problems in a timely manner, • gathers and analyzes information skillfully, • develops alternative solutions, • works well in group problem solving situations, • uses reason even when dealing with emotional topics. Project Management • develops project plans, • coordinates projects, • communicates changes and progress; completes projects on time and budget, • manages project team activities. Interpersonal Skills • focuses on solving conflict, • not blaming, • Maintains confidentiality, • listens to others without interrupting, • keeps emotions under control, • remains open to others’ ideas and tries new things Oral Communication • speaks clearly and persuasively in positive or negative situations, • listens and gets clarification; responds well to questions, • demonstrates group presentation skills; participates in meetings Written Communication • writes clearly and informatively, • varies writing style to meet needs, • presents numerical data effectively, • able to read and interpret written information in English. Teamwork • balances team and individual responsibilities, • exhibits objectivity and openness to others’ views; gives and welcomes feedback, • contributes to building a positive team spirit, • puts success of team above own interests, • able to build morale and group commitments to goals and objectives, • support everyone’s efforts to succeed. Delegation: • delegates work assignments, • matches the responsibility to the person; gives authority to work independently, • sets expectations and monitors delegated activities; provides recognition for results Ethics • treats people with respect; keeps commitments, • inspires the trust of others, • works with integrity and ethically; upholds organizational values. Judgment • displays willingness to make decisions, • exhibits sound and accurate judgment; supports and explains reasoning for decisions, • includes appropriate people in the decision-making process; makes timely decisions Motivation • sets and achieves challenging goals, • demonstrates persistence and overcomes obstacles, • takes calculated risks to accomplish goals. Planning/Organizing • plans for additional resources, • organizes and schedules other people and their tasks, • develops realistic action plans Professionalism • approaches others in a tactful manner; reacts well under pressure, • treats others with respect and consideration regardless of their status or position; accepts responsibility for own actions, • follows through on commitments Quality • demonstrates accuracy and thoroughness; looks for ways to improve and promote quality, • applies feedback to improve performance; monitors own work to ensure quality Quantity • meets productivity standards, • completes work in timely manner; strives to increase productivity; works quickly Safety and Security • observes safety and security procedures, • follows Safety protocol for any company injuries or incidents, • determines appropriate action beyond guidelines; reports potentially unsafe condition, • uses equipment and materials properly Adaptability • adapts to changes in work environment; manages competing demands, • changes approach or method to best fit the situation, • able to deal with frequent change, delays, or unexpected events Attendance/Punctuality • ensures work responsibilities are covered when absent, • arrives at meetings and appointments on time Dependability • follows instructions, responds to management direction, • takes responsibility for own actions, • completes tasks on item or notifies appropriate person with an alternate plan Initiative • undertakes self-development activities; seeks increased responsibilities, • takes independent actions and looks for and takes advantage of opportunities Innovation • displays original thinking and creativity, • meets challenges with resourcefulness, • develops innovative approaches and ideas QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable to individuals with disabilities to perform the essential functions. Education and/or Experience: High School diploma or general education degree a minim of 5 years related experience in blow molding and maintenance/tooling knowledge, robotics knowledge, and/or training; or equivalent combination of education and experience. In lieu of technical degree, certifications are a plus. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to interpret bar graphs. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills: To perform this job successfully, an individual should have knowledge of database software, such as Mattec and Microsoft Office software such as: Word, Excel, Outlook, etc. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand, walk, sit, and use hands to handle or feel. Specific vision abilities required by this job include distance, vision, color vision, depth perception and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. FLSA STATUS Salary Exempt

Job Description At Skidabrader, we utilize our world-class, proprietary pavement texturing equipment to improve the safety and skid resistance of North America’s highways, bridges, and airport runways. We are currently looking for Regional Business Development Managers based in Ft. Worth, TX (serving Texas and surrounding states) and California (covering the West Coast), with the ability to travel throughout their assigned territory. These roles will be based out of our Ft. Worth office (Texas hire) or remote (California hire). The Role You Will Play • Develop and maintain a pipeline of opportunities to support growth within your assigned territory., • Build and strengthen relationships with DOTs, AGC chapters, and general contractors in specific regions., • Position Skidabrader and Frontline Road Safety as strategic solutions providers, highlighting safety, skid resistance, and long-term value., • Perform market research to identify business opportunities, developing relationships with construction companies, transportation authorities, and state/local agencies., • Prepare and present sales proposals and attend industry events., • Manage customer relationships and accounts while traveling 6–8 nights per month (reduced travel expectations compared to traditional sales roles)., • Provide product training presentations for customers as needed.The Successful Candidate Will Have, • Bachelor’s degree from an accredited university or equivalent work experience., • Results-driven, self-starter mindset with a high sense of urgency., • Minimum 2 years’ experience in business development or project management within construction equipment, concrete, asphalt, striping, or paving industries., • Background working with government clients, DOTs, and general contractors at higher levels of management., • Ability to read site plans and identify potential challenges., • Knowledge of contracts and contract language., • Understanding of flexible and rigid pavements, aggregates, and mix designs., • DOT, airport, and AIRNAV knowledge preferred., • Familiarity with highway construction, maintenance, and related equipment is a plus.Compensation and Growth, • California: Target range $110,000 – $140,000 base salary, depending on experience and qualifications (not guaranteed; final offer will be based on individual background and fit)., • Texas: Target range $100,000 – $125,000 base salary, depending on experience and qualifications (not guaranteed; final offer will be based on individual background and fit)., • Generous commission plan., • Opportunities for advancement within Frontline Road Safety for high-performing team members., • Additional compensation elements (performance-based incentives, vehicle allowance, etc.) may be discussed during the interview process.What We Offer, • 401(k) with matching contribution., • Paid sick time, vacation, and holidays., • Medical, dental, and vision coverage., • Company-paid life insurance., • Supportive environment with the ability to grow your career within a nationwide infrastructure safety leader.

Job Description The Senior Director of Product Development & Management is responsible for leading the strategy, execution, and lifecycle management of cross-functional products in medical cost containment. This role ensures alignment with CERIS’ annual strategic objectives while addressing evolving industry needs. The Senior Director serves as a subject matter expert within their vertical segments, possessing relational, tactical and technical expertise in payment integrity across the industry. The leader in this role is accountable for driving product growth, with a focus on enhancing revenue generation and elevating client satisfaction. This is a remote position. ESSENTIAL FUNCTIONS & RESPONSIBILITIES: • Develop next generation services supporting strategic initiatives with prepayment and post payment solutions, • Grow product relationships throughout CERIS/CorVel, including but not limited to, corporate marketing, IT, regional offices, external clients, and all AE and AM staff CERIS/CorVel wide, • Functions as a subject matter expert (SME) in product development processes, product/solution areas, competitor offerings, and customer needs, • Plan, develop, define requirements, produce cost benefit analysis, and launch project within scheduled and committed time frames, • Builds external alliances with customers and industry experts to discuss industry information & trends, • Lead in the integration of complex business factors and implement long-term strategic LOB or market segment objectives; Shapes products to enhance client values and experience, • Drive product integrity as part of the collaboration of the Sr. leadership team and all other CERIS departments, • Interfaces with key leadership and functional experts providing insight and advice on business process improvement approaches to strategic business challenges, • Provide mentoring, coaching, and leadership across all levels at CERIS; presses for continuous improvement in a “learn and do” approach, • Produces content for training AE and AM teams including market differentiation, benchmarking, ETC, • Manages multiple projects, priority setting, and committed schedules, • Available to travel up to 25% for customer onsite visits and events KNOWLEDGE & SKILLS: • Strong interpersonal skills, complex problem-solving skills, drive for concrete results, be innovative, • Must be well spoken and able to present product/topics at events without verbal crutches, • Excels in building product business plans with forecasting and maturation plan, • Superb attention to detail and ability to deliver results in a fast paced and dynamic environment, • Strong analytical and modeling ability and distilling data into actionable results, • Comfortable with ambiguity and in working in a cross functional role, • Technology industry experience considered a plus but not required EDUCATION & EXPERIENCE: • Bachelor’s degree or higher from an accredited college or university is preferred, • 10+ years of relevant experience or equivalent combination of educations and work experience PAY RANGE: CorVel uses a market based approach to pay and our salary ranges may vary depending on your location. Pay rates are established taking into account the following factors: federal, state, and local minimum wage requirements, the geographic location differential, job-related skills, experience, qualifications, internal employee equity, and market conditions. Our ranges may be modified at any time. For leveled roles (I, II, III, Senior, Lead, etc.) new hires may be slotted into a different level, either up or down, based on assessment during interview process taking into consideration experience, qualifications, and overall fit for the role. The level may impact the salary range and these adjustments would be clarified during the offer process. Pay Range: $144,126 – $187,198 A list of our benefit offerings can be found on our CorVel website: CorVel Careers | Opportunities in Risk Management In general, our opportunities will be posted for up to 1 year from date of posting, or until we have selected candidate(s) to fulfill the opening, whichever comes first. ABOUT CERiS: CERiS, a division of CorVel Corporation, a certified Great Place to Work® Company, offers incremental value, experience, and a sincere dedication to our valued partners. Through our clinical expertise and cost containment solutions, we are committed to accuracy and transparency in healthcare payments. We are a stable and growing company with a strong, supportive culture along with plenty of career advancement opportunities. We embrace our core values of Accountability, Commitment, Excellence, Integrity and Teamwork (ACE-IT!). A comprehensive benefits package is available for full-time regular employees and includes Medical (HDHP) w/Pharmacy, Dental, Vision, Long Term Disability, Health Savings Account, Flexible Spending Account Options, Life Insurance, Accident Insurance, Critical Illness Insurance, Pre-paid Legal Insurance, Parking and Transit FSA accounts, 401K, ROTH 401K, and paid time off. CorVel is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. #LI-Remote

Job Description Steel Inside Sales Representative CF Metals is growing—and we’re looking for a driven Inside Sales Representative with a proven book of business to join our team. We specialize in the fabrication and sales of welded embeds and Steel for the precast concrete industry and other welding-focused sectors. If you’re a sales pro who understands the value of consistent outreach and already knows the welded embed space, we want to hear from you. What You'll Do: • Leverage your existing book of business to drive immediate sales., • Make 25+ cold calls per day until your pipeline is fully established., • Sell and promote welded embeds to precasters and other relevant industries requiring welding services., • Build relationships with purchasing managers, estimators, and project managers., • Work closely with production and estimating teams to ensure accurate quoting and delivery timelines., • Proven experience in inside sales, preferably in the construction, fabrication, or steel/welding industry., • An active book of business in welded embeds or related markets., • Strong knowledge of precast concrete and welding-related clients., • Relentless drive to grow accounts and land new ones—especially via cold calling., • Excellent phone communication and follow-up skills., • Competitive compensation with performance incentives., • Opportunity to grow with a focused, fast-paced team., • Supportive environment where your work and experience are valued. Company DescriptionCF Metals Inc has two plants and is growing at a rapid pace.CF Metals Inc has two plants and is growing at a rapid pace.

Job Description Equipment Mechanic – Barnsco Texas Fort Worth, TX Full-Time Keep Heavy Equipment Running at Barnsco Texas! Barnsco Texas, part of the Kodiak Building Partners family, has been serving the concrete construction industry since 1984. We provide equipment rentals, sales, maintenance, and repair services for medium and heavy-duty construction machinery. We’re seeking a skilled Equipment Mechanic / Heavy Equipment Technician to join our team and ensure our fleet and customer equipment operate safely and efficiently. What You’ll Do: * Inspect, troubleshoot, and repair mechanical and electrical issues on forklifts, tractors, trailers, and other construction equipment. * Perform preventive maintenance, including oil changes, lube, filter replacements, and safety inspections. * Assist customers with equipment issues and provide timely service on-site. * Submit repair bids, complete work orders, and maintain accurate paperwork for the Equipment Service Manager. * Train new employees and assist with team development. * Perform road calls and emergency repairs as needed. What We’re Looking For: * High school diploma or GED required. * 2+ years of hands-on experience in construction equipment maintenance, heavy equipment repair, or industrial equipment service. * Strong mechanical and electrical skills; ability to read schematics and use computer-assisted troubleshooting tools. * Ability to lift 75 lbs., climb on/off equipment, and operate machinery safely. * Valid driver’s license and professional, customer-focused attitude. Why Work at Barnsco Texas? * Competitive pay and benefits. * Career growth in a stable, Texas-based company. * Leadership that is accessible and values your skills. * A team-oriented culture that encourages individual growth and recognizes hard work. Keywords: Equipment Mechanic, Heavy Equipment Mechanic, Construction Equipment Technician, Equipment Maintenance, Diesel Mechanic, Hydraulic Technician, Industrial Equipment Service, Preventive Maintenance, Forklift Mechanic, Tractor Mechanic, Trailer Repair, Service Technician, Road Call Technician Apply Today – If you are an experienced equipment mechanic who enjoys hands-on problem-solving and keeping construction machinery running strong, Barnsco Texas wants you on our team! Company DescriptionBarnsco Texas, a member of the Kodiak Building Partners family, has been serving the concrete construction markets in Texas since 1984. We are a Texas-based company that offers equipment sales, rentals, and maintenance services. Additionally, we provide concrete constructions supplies, equipment sales, rental, rebar fabrication, full service post-tension, and engineering services. At Barnsco Texas, our core values are at the heart of everything we do. We provide a unique environment that encourages individual growth and recognizes individual performance and hard work. Our management team is visible and accessible, ensuring effective communication. If you are seeking growth opportunities in a stable company, look no further than Barnsco Texas.Barnsco Texas, a member of the Kodiak Building Partners family, has been serving the concrete construction markets in Texas since 1984. We are a Texas-based company that offers equipment sales, rentals, and maintenance services. Additionally, we provide concrete constructions supplies, equipment sales, rental, rebar fabrication, full service post-tension, and engineering services.\r\nAt Barnsco Texas, our core values are at the heart of everything we do. We provide a unique environment that encourages individual growth and recognizes individual performance and hard work. Our management team is visible and accessible, ensuring effective communication. If you are seeking growth opportunities in a stable company, look no further than Barnsco Texas.

Job DescriptionDescription: Job Title: Production Planner Reports to: Planning Manager FLSA Status: Non-Exempt Travel: Travel required at times (0% - 10%) Position Summary: The Production Planner is responsible for creating plans for managing inventory programs and maintaining plant finite schedules. Planner liaises with their counter parts in Production, Quality, Warehouse and Customer Service to address normal business processes of manufacturing. Job impacts between $30-50 million in product sales, between $20-40 million in production cost and $3-5 million in inventory value. Essential Duties and Responsibilities: • Regularly meets with assigned plants to arrange orders into the optimal sequential work schedule and provides appropriate lead times to customer service for customer orders., • Examines production specifications and capacity data, and performs mathematical calculations to determine production processes, tools, and human resource requirements for NPD., • Meets weekly with assigned plants to review prior week’s performance for schedule adherence and overproduction. Unacceptable performance is identified, and corrective actions taken. A frozen schedule is established., • Manages stocking programs to assure demand to forecast performance and supply execution are graded. Action is taken to identify out of bounds results to bring the program back within plan., • Reviews FG inventory within warehouses to identify orphan or SLOB and initiates action to address., • Reviews assigned plant lead times weekly, identifies areas needing supply support to reduce to targeted lead time levels and takes appropriate actions to ensure success. To perform the job successfully, an individual should demonstrate the following competencies: • Strong understanding of inventory management principles related to demand management (forecast & firm), impact on supply plan (make & buy) and inventory plan (projected levels to manage)., • Understand principles in the Sales & Operations Planning (S&OP) business process., • Analytical - Strong analytical skill set and demonstrated ability to work with cross-functional teams to quickly analyze problems and develop effective solutions. Collects and researches data; Uses intuition and experience to complement data., • Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics, • Customer Service - Manages difficult internal or external customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments., • Judgment - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions., • Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments. Excellent interpersonal skills; strong with presentation and communications skills; demonstrated organizational skills with solid follow-through to results. Demonstrated ability to interface with, and maintain effective relationships with, all functional departments and employees in a team-oriented environment., • Highly motivated self-starter with a high energy level and track record of success., • Flexible and the ability to quickly adapt to changes in the work environment and manage competing demands., • Well organized, dependable, punctual, strong work ethic with exceptional integrity. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education Requirements/Work Experience: • Bachelor’s Degree or equivalent in engineering, business, economics, or similar discipline;, • Experience in production order management (10 years),, • Experience in inventory management (5 years), • Or combination of both education and experience Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include Close vision. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand and walk. The employee is occasionally required to reach with hands and arms. This document in no way states or implies that these are the only responsibilities of, and the duties to be performed by, the employee occupying this position. The Company reserves the right to change, modify, amend, add to or delete from, any section of this document as it deems, in its judgment, to be proper.