Trabajos concrete en Buffalo, New YorkCrear alertas

Job Description General labor for Drainage / Foundation repair Company..... Assist in the installation of interior and exterior drainage systems,sump pump systems, wall crack repair, masonry projects, and more ! Company DescriptionInstall drainage systems in basements and yards, sump pumps, foundation repair / structural repair , masonry / concrete finishingInstall drainage systems in basements and yards, sump pumps, foundation repair / structural repair , masonry / concrete finishing

Job Description Drainage & Foundation Repair company.. Looking for professionals to install drain tile systems ,sump pumps, wall crack repair, concrete and more! Must have valid license. Company DescriptionInstall drainage systems in basements and yards, sump pumps, foundation repair / structural repair , masonry / concrete finishingInstall drainage systems in basements and yards, sump pumps, foundation repair / structural repair , masonry / concrete finishing

Job Description RG HOME IMPROVEMENT is an energetic outfit that specializes in QUALITY WORK. We seek to find individuals who are able to complete , but not be limited by the following items • Reads plans, instructions, or specifications to determine work activities., • Measures, marks, or records openings or distances to layout areas where construction work will be performed., • Signals construction equipment operators to facilitate alignment, movement, and adjustment of machinery., • Mixes, pours, spreads, smoothen and finishes concrete or cement., • Erects or dismantles scaffolding, shoring, braces, traffic barricades, ramps, or other temporary structures., • Sprays materials such as water, steam, paint, or stucco through hose to clean, coat, or seal surfaces., • Applies caulking compounds by hand or with caulking gun to seal crevices., • Grinds, sands, or polishes surfaces such as concrete, marble, terrazzo, or wood flooring., • Demolishes buildings, saws lumber, dismantles forms, removes projections from concrete, mounts pipe hangers, and cuts and attaches insulating material., • *The company reserves the right to add or change duties at any time.

Job Description Senior Structural Engineer (Hybrid) Location Options: Williamsville, NY | Rochester, NY | Albany, NY | Atlanta, GA | Buffalo, NY | Upper Arlington, OH | Eau Claire, WI | Meriden, CT | Minneapolis, MN | Hauppauge, NY | Syracuse, NY | Richmond, VA | Alexandria, VA | Voorheesville, NY (Preference for New York offices; must be within commuting distance to an office. This is a hybrid role, not remote.) About the Company Our client is an innovative architecture, engineering, energy efficiency, and construction management firm that partners with both private and public entities to deliver comprehensive facility and infrastructure solutions. Founded in 1940 as a small civil engineering and surveying firm in Western New York, the company has grown into a full-service organization with professional engineers across all disciplines, as well as architects, landscape architects, construction managers, planners, and interior designers — all united by a shared commitment to collaboration, quality, and integrity. Why Join the Team • Amazing company culture and collaborative work environment, • Competitive salary and performance-based growth, • Comprehensive benefits package: Medical, Dental, Vision, 401(k) with company match, • Generous PTO and 9 paid holidays, • HSA and FSA options, • Career advancement opportunities through structured Career Development Plans, • Tuition reimbursement and professional development support, • Work-life balance focus and wellness programs Position Overview We are seeking an experienced and licensed Senior Structural Engineer to join our growing multidisciplinary team. In this role, you will lead the design and analysis of high-profile structural projects, collaborating with architects, engineers, and construction professionals across multiple disciplines. This position offers the opportunity to make a lasting impact on the built environment while contributing to the success of major company programs. Key Responsibilities • Lead the analysis, design, and computer modeling of structural systems., • Coordinate with architectural, mechanical, electrical, and civil disciplines to ensure project integration and success., • Prepare detailed plans, drawings, and technical specifications., • Conduct construction administration activities including shop drawing review and field observation., • Interpret, organize, and coordinate complex assignments independently., • Explore innovative engineering solutions and develop novel technical concepts., • Serve as a technical liaison within and outside the organization., • Manage projects from concept through construction, ensuring compliance with structural codes and standards., • Conduct facility assessments, draft technical reports, and prepare documentation., • Mentor junior engineers, interns, and CAD technicians., • Participate in client, project, and team meetings., • Occasional travel to local and non-local project sites as required. Qualifications • Bachelor’s Degree in Structural or Civil Engineering (focus in Structural Engineering required)., • 10–20 years of progressive experience in structural engineering., • Professional Engineer (PE) license required; Structural Engineer (SE) license preferred or required., • Proficiency in structural engineering software (Bentley RAM products) and 3D modeling tools (Revit, AutoCAD)., • Strong technical and problem-solving skills with proficiency in Microsoft Excel and BlueBeam., • Excellent communication, time management, and technical writing skills., • Deep understanding of structural codes and standards (ASCE 7, AISC 360, ACI 318, etc.)., • Experience designing with a wide range of materials including steel, concrete, masonry, and wood.

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Perform construction special inspections and material testing services at commercial construction sites in the Greater Buffalo Area. Responsibilities • Perform tests and inspections for soils, concrete, masonry, hot mix asphalt, spray applied fireproofing, welding & bolting, geotechnical investigations, structural steel, and more for quality control/quality assurance on commercial construction job sites, • Read construction drawings and specifications and correctly interpret test results, • Complete each testing assignment accurately and in accordance with the appropriate standard, • Record and report results in a clear, concise manner, • Turn in field data records and completed reports for each project daily, • High School Diploma required, • Associate or bachelor’s degree in civil engineering / technology, or related is ideal although not necessary, • Must possess at least one International Code Council (ICC) certification for one of the following Special Inspector categories: Reinforced Concrete, Soils, Masonry, Spray Applied Fireproofing, Steel & Bolt, or Steel & Weld, or American Concrete Institute (ACI) Grade 1, or EIT (Engineer-in-Training) Certificate through a State Board, • Possess ability to maintain effective working relationships with managers, co-workers and clients through clear communication and proactive progress reporting Benefits CME offers competitive wages and all benefits listed here: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal). All benefits become available to eligible full-time employees upon completion of an eligibility period. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR PGSbKB47GS

Job Description BIDCO Marine Group, Inc. - Senior Estimator / Civil Engineer Position Overview We are seeking an experienced Estimator/Civil Engineer to lead the preparation of competitive, accurate cost estimates for complex underwater, marine, and heavy civil construction projects. BIDCO specializes in the construction and rehabilitation of critical waterfront infrastructure throughout the Great Lakes, Northeast, and Atlantic Seaboard regions, including: • Municipal water intakes and outfalls, • Subaqueous pipelines and cables, • Construction and maintenance of navigational locks and flood-control structures, • Construction and maintenance of energy-related infrastructures at hydroelectric and nuclear power generating plants, • Piledriving, bulkheads, cofferdams, and associated temporary works, • Demolition and close out of remnant coal power infrastructures. Compensation & Benefits • Full-time salaried position (highly competitive, salary commensurate with experience), • Comprehensive health insurance, paid holidays, flexible scheduling, generous vacation, • 401(k) with company match, • Travel per diem and corporate card, • Relocation assistance available, • Perform detailed quantity take-offs from plans and specifications, • Develop comprehensive cost estimates for labor, materials, equipment, and subcontractors, • Select optimal construction means and methods for marine and heavy civil work, • Estimate specialized scopes including driven piling, underwater concrete, structural steel, and mechanical systems, • Design or coordinate the design of temporary works (cofferdams, shoring, formwork, falsework, templates, etc.), • Solicit, negotiate, and analyze subcontractor and supplier quotations, • Lead bid-closeout analysis and final proposal assembly, • Assist in writing technical narratives and project schedules, • Bachelor’s degree in civil engineering or construction management (required), • Minimum 5 years of progressive experience in heavy civil/marine estimating and project engineering, • Proven track record estimating projects valued from $5M–$50M+, • Expert-level quantity take-off and cost-analysis skills, • Strong working knowledge of temporary marine structures and dewatering systems, • Excellent written and verbal communication skills, • Ability to thrive in a fast-paced environment and manage multiple bids simultaneously, • Team-oriented leader who earns respect through competence, decisiveness, and collaboration, • Results-driven with a focus on accuracy, profitability, and client satisfaction Company DescriptionBIDCO Marine Group, Inc. is an equal opportunity employer. Veterans are respected here and are strongly encouraged to apply. If you have a passion for complex marine / underwater infrastructure and a proven ability to deliver winners and successful projects, I would like to hear from you. This is a career position as a key member of our team with avid project responsibility, it could be one the most interesting positions you have ever held; our work is vastly different every job, we work underwater and our scope is never quite the same. BIDCO (Buffalo Industrial Diving Company) has been in business 33 years and 2025 broke all revenue/margin records across the board, which has fueled a major investment and recapitalization of the company by its two principals. Ready for an exciting change? Come visit me, check us out and kick the tires on something new, with better pay and more appreciation for what you do than where you are currently doing it now. Send your resume and work history right to Mark Judd (Pres. & Founder) at , call me on my cell phone, stop in and meet Kim at the front desk, or apply directly on ZipRecruiter. Check our projects at bidcomarine.com (very outdated, sorry) and come help us build the next big one. Thank you for looking!BIDCO Marine Group, Inc. is an equal opportunity employer. Veterans are respected here and are strongly encouraged to apply.\r\n\r\nIf you have a passion for complex marine / underwater infrastructure and a proven ability to deliver winners and successful projects, I would like to hear from you. This is a career position as a key member of our team with avid project responsibility, it could be one the most interesting positions you have ever held; our work is vastly different every job, we work underwater and our scope is never quite the same. \r\n\r\nBIDCO (Buffalo Industrial Diving Company) has been in business 33 years and 2025 broke all revenue/margin records across the board, which has fueled a major investment and recapitalization of the company by its two principals.\r\n\r\nReady for an exciting change? Come visit me, check us out and kick the tires on something new, with better pay and more appreciation for what you do than where you are currently doing it now.\r\n\r\nSend your resume and work history right to Mark Judd (Pres. & Founder) at , call me on my cell phone, stop in and meet Kim at the front desk, or apply directly on ZipRecruiter.\r\n\r\nCheck our projects at bidcomarine.com (very outdated, sorry) and come help us build the next big one. Thank you for looking!

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Seeking a detail-oriented Civil Field Engineer to lead on-site investigations, perform specialized inspections, and oversee material testing. This role involves managing projects from start to finish, conducting precise engineering calculations, and delivering accurate, timely reports that meet industry standards. Responsibilities • Conduct specialized inspections and field evaluations, including soils, concrete, masonry, and steel material testing., • Perform geotechnical investigations, such as test boring and test pit observations, supported by laboratory analysis and accurate geotechnical calculations., • Collaborate with Senior Professional Engineers to execute a wide range of field and technical tasks., • Prepare detailed engineering studies and comprehensive reports that meet project and regulatory standards., • Coordinate and manage projects related to Special Inspections and Construction Materials Testing, ensuring timely delivery and quality outcomes., • Implement rigorous Quality Assurance protocols, maintaining strict adherence to technical standards, codes, and best practices in both field and laboratory settings., • Bachelor’s degree in Civil Engineering or a closely related discipline., • Engineer-in-Training (E.I.T.) certification required., • Proficiency in Microsoft Office Suite (Word, Excel, Outlook) for documentation and reporting., • Strong interpersonal skills with the ability to build and maintain effective relationships with managers, team members, and clients., • Exceptional organizational and time-management abilities to handle multiple priorities efficiently., • Knowledge of construction materials, procedures, and documentation is highly desirable. Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR 6SysZVsr6w

Job Description We are currently hiring a Structural Engineer to join our Building Engineering Division in our Buffalo, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Structural Discipline provides structural engineering services with emphasis on new design, repair, and rehabilitation of constructed works, as well as investigation and performance evaluation. This position will work closely under the supervision of a Senior Structural Engineer to develop concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently, as well as part of multi-discipline teams Candidates will work on an interesting variety of project types including K-12 and higher education, municipal, health care, large commercial, residential and other unique projects. This role can accelerate your career goals through immediate opportunities to lead, and comes with a competitive starting salary, incentive compensation, a comprehensive benefit package, and opportunities to become a LaBella shareholder. Duties • Perform complex design calculations for analysis and design of new and existing structural systems., • Prepare documents and reports from concept design through advanced technical design documentation., • Perform field investigations and document findings., • Work closely with other engineering and architectural disciplines., • Review shop drawings, respond to RFI’s and perform field observations during CA phase. Salary Range: $65,000 - $100,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Bachelor of Science degree in Civil or Structural Engineering is required. Coursework in building systems engineering required., • Master of Science degree in Structural Engineering is preferred., • 3 years minimum experience with concrete, steel, masonry, and/or wood design is required., • Working knowledge of AutoCAD, Revit and structural engineering design software (RISA, SAP, and/or TSD) is required., • E.I.T. accreditation preferred., • Excellent verbal and written communication skills. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: Precast Design Engineer - Civil/Structural Join Our Team as a Precast Design Engineer – Innovate and Lead in Concrete Design Are you ready to take your engineering career to new heights? Fisher Associates is seeking a skilled Precast Design Engineer to join our dynamic team, where your expertise in designing precast concrete components will make an impact on diverse civil and structural projects. Join Fisher Associates and bring your talents to a team that values innovation, collaboration, and your unique contributions. Apply now to advance your career and play a key role in impactful projects within a supportive and dynamic environment! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5 -10 years minimum Precast concrete design engineering experience, • Experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations) preferred, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. Must be available for all shifts (1st,2nd,3rd) as well as holiday/weekend availability. SUMMARY: Testing of raw materials, work in process and finished goods. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Microbiological, chemical and physical testing of raw materials, work in process and finished goods. EDUCATION and/or EXPERIENCE: • Preferred but not required, Associates degree in Chemistry or Biology or 4 years pervious lab experience. Knowledge of Good Manufacturing Practices and SPC Plating., • Ability to read and interpret test results, safety rules, operating and maintenance instructions and procedure manuals., • Ability to fill out routine reports and correspondence., • Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions., • While performing the duties of this job the employee is regularly required to stand, walk, use hands to finger, handle or feel objects, tools or controls, bend at the waist, turn, stoop, balance, reach with hands and arms above shoulder height, talk and hear, taste and smell., • The employee must regularly lift and/or move up to 55 pounds and occasionally lift and/or move up to 100 pounds., • Must be able to use basic laboratory equipment., • While performing the duties of this job, the employee regularly works near moving mechanical equipment and is exposed to wet and/or humid conditions. May have to work with or be exposed to chemicals containing sodium hydroxide or phosphoric acid requiring personal protective equipment, per Company regulations. Worker will be exposed to cold temperatures below 40 degrees F. *The hourly rate as indicated in the CBA. The posted pay rate reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job DescriptionDescription: Precast Engineer - Civil/Structural Join Our Team as a Precast Engineer – Shape the Future of Concrete Design & Innovation! Fisher Associates is hiring a full-time Precast Engineer to design and engineer high-quality precast concrete components for a variety of civil and structural engineering projects. You’ll ensure every element meets structural codes, safety standards, and project specs—delivering safe, reliable, and cost-effective solutions. Collaborate with a skilled, supportive team and grow your engineering career in a flexible, impact-driven environment. Apply now and engineer the future with us! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials., • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. What We Offer Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0 - 5 years minimum of transportation/structural experience preferred, • Concrete design engineering course or design experience preferred, • EIT or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver high quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job Description Monroe Tractor is a well-known and respected construction equipment and agricultural equipment dealer with over 70 years of experience servicing the northeastern US. With 18 locations throughout New York, Pennsylvania, Vermont, Connecticut, Rhode Island and Massachusetts, we pride ourselves on providing best-in-class sales and support to over 15,000 hardworking customers. Since our founding in 1951, the industries we serve have been transformed by the technologies, equipment, and capabilities undreamed of decades ago. But the people we serve haven't changed, and neither have we. We're still a family-owned business. We are seeking a knowledgeable and driven Wirtgen Product Specialist to serve as the subject matter expert for Wirtgen Group equipment and Heavy Highway product lines. In this role, you will play a critical part in supporting our sales team and customers by delivering in-depth product knowledge, technical support, and application expertise. You will build and maintain strong customer relationships within your assigned territory to increase market share, drive equipment sales, and contribute to long-term company profitability. This position requires a deep understanding of road construction equipment, asphalt and concrete milling, paving, soil stabilization, and other heavy equipment applications. Territory: BUFFALO/ROCHESTER/SYRACUSE TERRITORIES Responsibilities • Increase market share and profitability for the stated range of products within the geographic area., • Develop relationships and network throughout the industry to monitor and participate in all product activities. Know the market; where future work will be done, where it is currently being done and by whom. Develop an open and "real time" channel of communication throughout the industry. Be recognized as a solutions provider and a wealth of expertise for our customers., • Create opportunities by evaluating customer fleets and techniques, and proactively propose better solutions, • Assist the Sales force with product demonstrations and technical presentations., • Deliver all new machines and provide onsite operation and maintenance training. Regularly follow up with customer's deliveries to insure they remain fully trained, well supported and highly satisfied with our products and services., • Communicate regularly with the store/branch managers and full line sales professionals to share information on activity within their regions., • Be a primary channel of communication for product technical and commercial issues with our manufacturing partners., • Be an active and highly visible participant in industry groups and events and keep abreast of competitive activity and competitive products., • Always seek additional parts and service opportunities for company and reporting those prospects to the appropriate parties., • Provide training for our customers and employees, which includes continual education on developments for our product line, as well as that of our competitors., • Assist customers with parts, service and repair requirements., • Coordinate delivery and pickup of equipment as needed by customer., • Follow all safety rules and regulations while performing work assignments and adhere to all policies and procedures as specified in company manuals and as directed in the employee handbook., • Proactively seek and participate in available company-sponsored training, in an effort to develop and advance knowledge base and skill set., • Participate in all company/location driven communication efforts, including open book meetings, huddles, department meetings and other related efforts., • Maintain a positive and professional working relationship with peers, management, and support resources, with a constant commitment to teamwork and exemplary customer service., • Must be able to work independently, • Prior Heavy Highway Construction knowledge (Milling, Paving, etc.) required, • Possess basic mechanical skills for setups and minor repairs, • Prior sales experience and/or training required, • Good understanding of local market conditions, • Must have strong communication and interpersonal skills, • Excellent customer service skills, • Medical, Dental & Vision Insurance, • 401K Plan + Match, • Generous Paid time off Policy, • Short/Long Term Disability, • Family owned and operated We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Pay is commensurate with the applicant's experience, as it relates to the position. Pay Range$55,000—$65,000 USD

Job Description Job Title: Sonographer Reports to: Chief Nursing Officer FLSA Status: Non-Exempt Summary: CNY Fertility is a leading provider of affordable and accessible fertility care, committed to helping individuals and couples achieve their dreams of parenthood. We are passionate about patient-centered care and innovative treatment options. Our Sonographer performs patient-specific duties in the area of fertility, specializing in obtaining ultrasound images used for patient treatment and diagnosis. Responsibilities also include completing scans effectively and efficiently while maintaining the highest standards of patient care. Required Duties and Responsibilities include the following. Other duties may be assigned. * 1. Perform ultrasound diagnostic procedures in accordance with the physician protocol. * 2) Educate patients regarding procedures to ensure cooperation while achieving optimal results. * 3) Follow prescribed safety standards while operating equipment. * 4) Maintain ultrasound equipment in appropriate operating condition. * 5) Examination of rooms and work areas to ensure proper presentation. * 6) Ability to successfully multi- task, excellent organization and time management. * 7) Ability to interact with physicians, staff and patients. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: Associates degree required. Minimum one year of sonography experience. Women's health experience preferred, fertility experience a plus. Certificates and Licenses: ARDMS required Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of an organization. Math Ability: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Knowledge, Skills and Other Abilities: • Medical Terminology, • Fertility experience preferred., • Obtain measurements and perform calculations to evaluate results. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands; reach with hands and arms and talk or hear. The employee is occasionally required to sit. Comprehensive benefits package: · 401(k) · Dental insurance · Vision Insurance · Health Insurance · Life Insurance · Flexible spending account · Paid time off · Maternity Leave

Job DescriptionDescription: Precast Project Engineer - Civil/Structural Precast Project Engineer – Shape the Future of Concrete Design and Mentor the Next Generation Are you a precast concrete expert ready to lead and inspire? Fisher Associates is seeking a Precast Project Engineer to serve as a Subject Matter Expert (SME) and guide our team in designing and delivering advanced precast and prestressed concrete structures. In this key role, you’ll mentor junior engineers, ensure design excellence, and drive innovation across diverse civil and structural projects. Working with multidisciplinary teams, you’ll develop efficient, sustainable, and code-compliant precast solutions that shape the built environment. Join Fisher Associates, where your leadership, expertise, and passion for precision fuel impactful projects and professional growth. Apply today to advance your career as a leader in precast concrete engineering and help shape the future of infrastructure design About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Maintain up-to-date knowledge of codes, technologies, and advancements in the precast-prestressed field., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-HYBRID Requirements: What You Bring, Your Expertise as a Precast Project Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 10 plus years of experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations)., • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Perform material testing services for concrete and asphalt at producer plants in accordance with established testing methods and standards. Responsibilities • Test construction materials such as concrete and asphalt for quality control/quality assurance in material plants, • Read construction documents and specifications and correctly interpret test results, • Record and report test results in a clear, concise manner, • Complete each testing assignment accurately and in accordance with the appropriate standards, • Turn in field data records and completed reports for each project daily, • Communicate regularly with direct supervisor to provide updates on project details, • High School Diploma required, • Desirable Certifications for this position are ACI Grade 1 Concrete, NYCMA QC/QA Certification; CME will provide full support in obtaining these certifications if do not currently possess, • Possess ability to maintain effective working relationships with managers, co-workers and clients through clear communication and proactive progress reporting, • Familiarity with construction materials, procedures and documents a plus, • Must possess and maintain a valid driver’s license Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR j01xX0l5iu

Job Description The following responsibilities outline the Christa Construction experience and skill set requirements for an individual holding the position of project superintendent. Key Responsibilities • Jobsite Safety, • Schedule Management, • Daily Reporting, • Jobsite Communication and Coordination, • Entrepreneurial Spirit (Leading job with Authority), • Delivering the project High Level of Quality, • Thorough technical knowledge and understanding of all structural trades (Mandatory)., • Read and comprehend all Contract Documents (Mandatory), • Understands geotechnical, structural and materials testing requirements and procedures., • Thorough knowledge and understanding of crew size required for various levels of productivity in every critical path trade., • Knowledge of soil types and their properties along with the ability to read and comprehend a soils report., • Experience managing the installation of public utilities. Fully understands the timeframe for design, approval, and easement processes., • Knowledge of Sediment and Erosion Control. SWPPP, • Thorough technical knowledge and understanding of site development trades., • Thorough technical knowledge and understanding of all building envelope trades., • Thorough technical knowledge and understanding of all mechanical, electrical, plumbing and fire protection trades., • Thorough technical knowledge and understanding of all finish trade work., • Thorough understanding of plumbing, sprinkler, HVAC, and electrical, fair housing and ADA codes., • Experience managing, coordinating, and obtaining close-in inspections and certificate of occupancy., • Can perform a full submittal review, • Ability to prepare and maintain accurate and professional as-built drawings., • Manages the commissioning of the building. (If not officially commissioned then manage the MEP engineers’ inspections, punch lists, and mechanical startups and schedule and document all owner training.), • Ability to effectively manage and chair weekly subcontractor meetings and take notes to track and update accordingly., • Ability to work closely with the Project Manager to ensure project harmony., • Makes project status presentations at owner meetings., • Completes and maintains accurate and thorough daily reports., • Completes and maintains weekly and incident safety reports., • Manages and maintains an up-to-date, posted, and accurate set of contract documents., • Maintains accurate submittal files on the project., • Performs accurate takeoffs (lumber, trim, doors, etc.), • Is proficient and experienced with FTP sites, F-drive server access, use, and similar computer abilities., • Responsible for coordinating and documenting all required project inspections with the Town, Utilities, Third Party Agencies, insurance representatives, etc., • Thorough understanding of the critical path on a project, sequence of construction, project phasing and various trade durations., • Schedules and manages the project mock-up., • Ability to create and maintain an accurate “three-week look ahead schedule"., • General knowledge of the duration and crew size required to complete various tasks., • Thorough understanding of lead time requirements for materials, selections, and work to be performed by others., • Ability to assist the Project Manager in creating an accurate buyout schedule, and the ability to provide accurate dates for the submittal log to avoid late contract awards or material submittals, • Holds Preconstruction meetings, • Soils handling, placement, and testing, • Civil utilities (storm, sanitary, water) and public utility (Gas, electric, Phone, Cat) installations., • Concrete and Masonry preparation, placement, and testing., • Structural - steel / decking / joists and LG framing installation, details, layout, and structural review, • Wood framing practices, inspections, and structural and dimensional review, • MEP rough in practices, coordination, details, and inspection., • Life safety — Fire walls / Smoke walls / Fire caulking / UL assembly, • Insulation (Thermal and Sound) and Vapor barrier, • All Interior finishes (Drywall — carpet), • Exterior -Waterproofing / weather barrier / moisture barrier / air barrier, • Roofing installation, details, and inspections, • Siding and flashing, installation, details, and inspections., • Holds an OSHA 30 Hour certificate, • Obtains and maintains a first aid/CPR certification, • Consistently sets a good example for others (wears hardhat, boots, safety glasses, etc.), • Demonstrates the ability and willingness to maintain a safe jobsite including disciplining subcontractors as necessary, • Maintains easily accessible, up to date site specific Christa Construction safety manual., • Collects site specific subcontractor safety manuals from all subcontractors prior to them starting work on site., • Equipment, • Oracle Primavera Cloud - Intermediate, • Microsoft Excel - Intermediate, • Procore - Intermediate, • Note Vault - Intermediate Whether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.Christa has completed over $7.0 billion worth of construction throughout New York State. We have experience in the construction of multi-family, senior and student housing, commercial offices, municipality work, medical facilities, warehouses, hotels and restaurants.\r\n\r\nWhether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.

Job Description QuestMark, a division of CentiMark Corporation, is the nation's largest self performing flooring contractor and the leading provider of polished concrete, epoxy, urethane, and exterior coatings for pedestrian and vehicle spaces in the industrial, commercial, and retail markets. Both family and employee owned, Centimark has been thriving since 1968 and we are still growing and currently hiring. With zero debt and a 5A1 Dun & Bradstreet rating, we are able to offer outstanding benefits including a Field Certification Program for career advancement as well as a Performance Bonus Program. Our employees also have multiple opportunities for recognition through our Safety & Risk Program as well as our Customer Satisfaction Program. The successful candidate for our Epoxy Flooring / Concrete Polishing Crew & Foreman opportunities will demonstrate initiative, be a self-starter with a high level of professional integrity, and have a strong work ethic and competitive drive. QuestMark / CentiMark provides a positive work environment with challenging career opportunities. We also offer competitive compensation and excellent benefits including: • Pay rate of $21-$31/hour dependent upon experience, • Hourly Bonus Program (paid out by job), • Health Insurance (Medical, Dental, Vision), • Life Insurance, • 401(k) Retirement Plan with Company Match, • Employee Stock Ownership Program (ESOP), • Paid Vacation & Holidays, • Field Certification Program for Career Advancement), • Install polished concrete, epoxy, urethane, and hard surface flooring systems, • Ensure strict compliance with all health and safety rules and regulations, • Proper use of equipment and materials, • Strive to meet and exceed any and all production targets, • Concrete polishing, epoxy / urethane flooring, • All candidates must be willing to travel and stay out of town, • Ability to work overnights, Saturdays, Sundays & holidays, • Valid driver’s license & reliable transportation, • 18 years of age or older, • Ability to pass a pre-employment drug screen, • Authorized to work in the United States Powered by JazzHR BIN1sBVObt

Job Description QuestMark, a division of CentiMark Corporation, is the nation's largest self performing flooring contractor and the leading provider of polished concrete, epoxy, urethane, and exterior coatings for pedestrian and vehicle spaces in the industrial, commercial, and retail markets. We have been consistently doing business during the Covid-19 pandemic, providing hazard pay and ensuring that the safety of our customers and crews is our highest priority. Both family and employee owned, Centimark has been thriving since 1968 and we are still growing and currently hiring. With zero debt and a 5A1 Dun & Bradstreet rating, we are able to offer outstanding benefits including a Field Certification Program for career advancement as well as a Performance Bonus Program. Our employees also have multiple opportunities for recognition through our Safety & Risk Program as well as our Customer Satisfaction Program. The successful candidate for our Service / Maintenance Crew will demonstrate initiative, be a self-starter with a high level of professional integrity, and have a strong work ethic and competitive drive. QuestMark / CentiMark provides a positive work environment with challenging career opportunities. We also offer competitive compensation and excellent benefits including: • Pay rate of $15-$25/hour dependent upon experience, • Hourly Bonus Program (paid out by job), • Health Insurance (Medical, Dental, Vision), • Life Insurance, • 401(k) Retirement Plan with Company Match, • Employee Stock Ownership Program (ESOP), • Paid Vacation & Holidays, • Field Certification Program for Career Advancement), • Repair and maintain polished concrete and epoxy flooring systems, • Diagnose floor issues and safety hazards, • Clean, sanitize, and disinfect commercial, industrial, and retail properties, • Ensure strict compliance with all health and safety rules and regulations, • Proper use of equipment and materials, • Strive to meet and exceed any and all production targets, • All candidates must be willing to travel and stay out of town, • Ability to work overnights, Saturdays, Sundays & holidays, • Valid driver’s license & reliable transportation, • 18 years of age or older, • Ability to pass a pre-employment drug screen, • Authorized to work in the United States Powered by JazzHR JylEJv8iAK

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Join our team as a Construction Materials Testing Technician, providing hands-on testing and inspection services for commercial construction projects. This role offers dynamic day trips throughout the Greater Buffalo, NY area, ensuring quality and compliance on-site. Responsibilities • Perform quality assurance testing on construction materials such as soils and concrete at commercial job sites., • Interpret construction drawings and specifications accurately, ensuring test results align with project requirements., • Complete all testing assignments with precision, adhering to applicable standards and industry best practices., • Document and report findings clearly and concisely, providing reliable data for project teams., • Maintain open communication with supervisors, delivering timely updates on project progress and test outcomes., • High school diploma required; an associate or bachelor’s degree in civil engineering, engineering technology, geology, or a related field is preferred but not mandatory., • Ability and willingness to obtain industry certifications through the American Concrete Institute (ACI) and International Code Council (ICC) — full support provided by CME., • Familiarity with construction materials, procedures, and documentation is a plus. Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR xb1ucmUCwr

Job Description QuestMark, a division of CentiMark Corporation, is the nation's largest self performing flooring contractor and the leading provider of polished concrete, epoxy, urethane, and exterior coatings for pedestrian and vehicle spaces in the industrial, commercial, and retail markets. Both family and employee owned, Centimark has been thriving since 1968 and we are still growing and currently hiring. With zero debt and a 5A1 Dun & Bradstreet rating, we are able to offer outstanding benefits including a Field Certification Program for career advancement as well as a Performance Bonus Program. Our employees also have multiple opportunities for recognition through our Safety & Risk Program as well as our Customer Satisfaction Program. The successful candidate for our Epoxy Flooring / Foreperson opportunities will demonstrate initiative, be a self-starter with a high level of professional integrity, and have a strong work ethic and competitive drive. QuestMark / CentiMark provides a positive work environment with challenging career opportunities. We also offer competitive compensation and excellent benefits including: • Pay rate of $21-$31/hour dependent upon experience, • Hourly Bonus Program (paid out by job), • Health Insurance (Medical, Dental, Vision), • Life Insurance, • 401(k) Retirement Plan with Company Match, • Employee Stock Ownership Program (ESOP), • Paid Vacation & Holidays, • Install polished concrete, epoxy, urethane, and hard surface flooring systems, • Ensure strict compliance with all health and safety rules and regulations, • Proper use of equipment and materials, • Strive to meet and exceed any and all production targets, • Concrete polishing, epoxy / urethane flooring, • All candidates must be willing to travel and stay out of town, • Ability to work overnights, Saturdays, Sundays & holidays, • Valid driver’s license & reliable transportation, • 18 years of age or older, • Ability to pass a pre-employment drug screen, • Authorized to work in the United States Powered by JazzHR r1rVBzuuEq

Job Description SUMMARY: To help maintain/enhance the value of the property throughout the repair and maintenance of Center structures, furnishings, systems and equipment at the least cost in order to contribute to the maximization of the Center's profitability. DUTIES & RESPONSIBILITY • Assist customers when and where needed, • Perform interior maintenance functions including repairs of fixture, floors, floor tile repairs, paint and prep, concrete cut and sidewall repairs, ceilings and walls. Also includes replacement of lighting devices., • Performs exterior maintenance functions including: repairs of fixtures, roofs, parking lots, and replacement of lighting devices., • Performs preventative maintenance checks on all equipment to keep it in the best possible condition., • Make minor electrical and plumbing repairs on the property., • Performs preventative maintenance checks on HVAC systems, fire protection sprinkler systems and fire extinguishers., • Ability to work from ladders and scissor lifts and boom lifts., • Informs supervisor of potential problems with any equipment used or systems responsible for., • Ability and hands on experience with corded power tools associated with building. maintenance and repairs such as circular saw, table saw, sawzall, and drills., • Act as a liaison with contractors in areas where responsible for maintenance and repair. EDUCATION REQUIREMENTS: High School Diploma or GED required EXPERIENCE: Hands on familiarity with methods and means of Various building maintenance and repairs. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individual with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts: in high, precarious places, in outside weather conditions, and is occasionally exposed to risk associated with various forms of building maintenance and repairs. The noise level in the work environment is equivalent to a busy shopping mall. Job Posted by ApplicantPro

Job Description Daemen University is a dynamic, independent, liberal arts institution committed to excellence in student centered learning. The University places special emphasis on preparing students for excellence in professional life, civic engagement, and on instilling and understanding that learning is an exciting lifelong journey. Students are encouraged to be creative, innovative, ethically minded leaders for an ever-changing, diverse, and interconnected world. The Mission of Daemen University is to prepare students for life and leadership in an increasingly diverse and complex world through the integration of education and professional preparation. Daemen University is going beyond instrumental needs to foster the development of individuals who are dedicated to the health and well-being of local and global communities. Purpose of Role Under supervision, the Maintenance Mechanic 1 performs all general building maintenance repairs. Has knowledge in basic electrical, plumbing and heating adequate to make minor improvements and replacements. Preferred to have additional basic knowledge in carpentry, masonry, and vehicle maintenance. About This Opportunity Joining our Maintenance team, the Maintenance Mechanic will be responsible for the following: • Maintain and replace sinks, toilets, urinals, and drinking fountains., • Perform repairs to furniture., • Repair and/or replace/install new ceilings and flooring., • Repair and installation of lighting fixtures, light switches, receptacles, and smoke detectors., • Perform various patching, painting, and staining tasks., • Minor drywall repairs., • Adjust and make repairs to door hardware including closures and exit devices., • Perform preventative maintenance on mechanical equipment to include lubrication of pumps and motors, change filters and belts., • Adjust, minor repairs and preventative maintenance to boilers and ventilation systems., • Perform minor masonry repairs and concrete work., • Moving furniture, hanging pictures, banners, and other signage., • Assembling, repairing chairs, desks, shelving units, etc., • Maintain university vehicles and equipment., • Handle/assist with university event set ups and breakdowns., • Inspect buildings, facilities, and equipment to ascertain required repairs and make recommendations to supervisor., • Basic computer skills to operate software for automation system - view only., • Considered essential personnel - which means that this position may be needed at times when the University is closed or in an emergency as determined by supervisor. Minimum Qualifications • High School Diploma or GED., • A minimum of 5 years of experience in building maintenance in a similar situation., • Valid New York State driver's license that satisfies both the University and insurance company underwriting rules and regulations for driving a university owned motor vehicle., • Ability to drive a university vehicle for the purpose of performing university business on a regular basis., • Position is considered essential personnel and is required to work overtime and weekend as required by inclement weather or scheduled campus event as directed by supervision., • Ability to read, write, speak and understand English., • Ability to follow department Uniform Policy., • Willingness to work some Saturdays as part of a Saturday rotation of all maintenance mechanics., • General knowledge of building maintenance., • General knowledge of carpentry, plumbing, electrical and heating repairs., • General knowledge of construction principles. Good mechanical abilities, • Knowledge of proper use and maintenance of hand and power tools related to job functions, with or without reasonable accommodations., • Ability to communicate effectively orally and in writing., • Ability to effectively as an individual or within a team as well as with diverse groups., • Ability to work overtime to respond to emergencies., • Ability to work effectively in a service-oriented environment, subject to frequently changing priorities., • Problem solving skills and sound judgment in a technical environment., • Basic computer skills necessary to use a work order system., • Ability to work nights, weekends, and evenings as necessary., • Adhere to safety procedures in the performance of job and be conscious of security issues involved in daily routine., • Ability to perform all above essential job functions for a minimum of an eight-hour shift, with one-half hour unpaid meal break, without significant risk of serious injury., • Ability to learn and perform all essential job functions accurately, with minimal direct supervision, within two weeks after the employee begins work., • Attention to detail and a positive attitude., • Starting from $18/hr, commensurate with experience. Total Compensation Daemen University offers a robust total compensation package that includes: • Health insurance with an option of two plans: an HSA plan with the deductible funded by employer HSA contributions, or a copay plan., • Dental insurance through the Guardian network., • Vision insurance through the Guardian network, and an option between the VSP or Davis plans., • An 8% employer contribution to the retirement savings account when employees contribute just 5%., • Fully paid long term disability insurance, guaranteed-issue life insurance for new hires up to a volume of $150,000., • Tuition waiver for full-time employees and their qualified dependents. Entrance in Tuition Exchange scholarship opportunities to pursue education at other institutions., • Generous time off for administrative and staff employees. Daemen University strongly encourages all campus community members to get vaccinated for COVID-19, including a booster vaccine. Job Posted by ApplicantPro

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. Must be available for all shifts (1st,2nd,3rd). Must be available for weekends and holidays. Sign-on Bonus: $5,000 SUMMARY: Installs, maintains, and repairs machinery, equipment, physical structures, and pipes, electrical and hydraulic systems by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Listens for unusual sound from machines or equipment to detect malfunction and discusses machine operation variations with operators, supervisors or other maintenance workers to diagnose problem and repair machine., • Required to have Respirator and Confine Space entry qualifications., • Shuts down machine or equipment and “Locks Out” all energy sources after starting repairs. Installs new or repaired parts. Tests to ensure proper operation., • Must have 70e and Lock Out/Tag Out Training., • Cleans and lubricates shafts, bearings, gears, and other parts of machinery according to company procedures or schedules while maintaining Equipment PM’s., • Sets up and operates machine tools such as; grinder, drill (to repair or fabricate machine parts), jigs, lathe and fixtures., • Installs and repairs electrical wiring and electrical and/or electronic components on machinery and equipment., • Lays out, assembles, installs, repairs, troubleshoots and maintains pipe systems and related hydraulic and pneumatic equipment., • Repairs and replaces gauges, valves, pressure regulators, and related equipment., • Must have experience in rebuilding pumps, motors as well as operating a cutting torch for welding/burning and rigging equipment., • Maintains the chemical pumps and CIP Systems., • Repairs and maintains the physical condition of the facility, e.g.:, • May have to fabricate and/or repair counters, benches, walls, partitions, racks and other structures as deemed necessary., • Installs, programs and repairs automated machinery and equipment such as programmable controllers, pumps, separators, homogenizers, packaging machines, compressors, refrigeration systems and other equipment as needed and trained to repair., • Must maintain a record of HVAC PM’s and operations., • Required to be a Refrigeration System Operator (Classes I & II), operate Boilers and Air Compressors Stationary Engineers license is desirable. EDUCATION and/or EXPERIENCE: • High school diploma or general education degree (GED) or one to three months related experience, training or equivalent combination of education and experience. Must be a minimum of 18 years of age. LANGUAGE SKILLS: • Ability to read and interpret work orders, safety rules, operating and maintenance instructions and procedure manuals., • Ability to fill out routine reports and correspondence., • While performing the duties of this job the employee is regularly required to stand, walk, use hands to finger, handle or feel objects, tools or controls, reach with hands and arms above shoulder height, talk and hear, taste and smell. The employee may be required to climb ladders and/or balance., • The employee must regularly lift and/or move up to 55 pounds, and occasionally lift and/or move up to 100 pounds. WORK SCHEDULES *The hourly rate as indicated in the CBA. The posted pay rate reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Buffalo-based Construction Management and General Contracting firm is looking for multi-talented carpenters for projects ranging in volume from $25,000 to $6,000,000.000 in both the commercial and residential markets. Great opportunity for the right person willing to learn to move up the ranks into a foreman/superintendent position. This position is primarily responsible for: 1. Carpentry work to include but not limited to: • Wood and metal stud framing, • Finished carpentry and trim work, • Installation of acoustical ceilings, • Drywall finishing and painting, • Installation of doors frames and hardware, • Occasional concrete and masonry work 2. Ability to read and understand drawings and specifications is preferred, 3. Must be willing to perform a wide range of work Education Level Required: Minimum of 5 years in the construction industry Location: Most work is located around the Buffalo Area but will travel up to 1 hour away Valid drivers license and a vehicle is a must. Company DescriptionHayes Construction Services is a small, private, and woman-owned general contracting company that serves the Buffalo, NY area. We are known for delivering high-quality work with integrity and reliability. We take pride in fostering a collaborative, team-based environment where every employee is valued and supported. Our work culture is professional yet approachable—built on mutual respect, open communication, and a shared commitment to excellence. If you're looking to join a company where your contributions matter and your growth is encouraged working with us may be the right fit for you!Hayes Construction Services is a small, private, and woman-owned general contracting company that serves the Buffalo, NY area. We are known for delivering high-quality work with integrity and reliability. We take pride in fostering a collaborative, team-based environment where every employee is valued and supported. Our work culture is professional yet approachable—built on mutual respect, open communication, and a shared commitment to excellence. If you're looking to join a company where your contributions matter and your growth is encouraged working with us may be the right fit for you!

Job Description QuestMark Flooring, a division of CentiMark Corporation, is a well-established, national leader in the industrial flooring industry for concrete polishing and epoxy systems. Since 1968 we have provided manufacturing facilities with a single source for solutions to their concrete floor needs. Reporting to the Operations Manager, this position will supervise multiple production crews. This position will also be responsible for doing pre-job inspections, planning jobs for labor crews and working closely with the Warehouse Manager in ordering materials for jobs. Job Duties: • Understand/read blue prints and develop phasing plans for projects, • Interaction with potential customers and current customer, • Managing each projects cost (labor, material, other) and profitability, • Responsible for pre-job meetings, job progress reports, safety, etc., • Supervision and evaluation of crew members, • Ability to work with sales team on project change orders and adjustments, • Must have 2-3 years of finished concrete or epoxy flooring experience, • Must have good working knowledge of flooring procedures and safety, • Excellent communication skills, • Analytical, leadership, interpersonal, problem solving and organizational/time management skills, • Experience with: Polished concrete and Epoxy installation experience would be a plus, • Valid State driver's license (in good standing) is required, • 18 years of age or older, • Authorized to work in the United States, • Health Insurance (Medical, Prescription, Dental and Vision), • Life Insurance, • Paid Holidays and Vacation, • 401(k) Plan With Company Match Powered by JazzHR 7GehmeSbWW

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Responsible for field investigations, special inspections, material testing, project management, and authoring on-time reports. Responsibilities • Project coordination and project management of special inspections and construction materials testing, • Perform special inspections, various field inspections, and materials testing as needed, • Report preparation and review, • Supervise and support project team, • Implement Quality Assurance, and assurance of field and laboratory adherence to technical standards and applicable codes, • Engage in continuing education to develop skills and keep certifications current Qualifications • AS / AAS or BS in Civil Engineering, or related is preferred, • Engineer in Training (E.I.T.) Certificate from a State Board, • For candidates without college degree and/or E.I.T. Certificate; Special Inspection Certifications through the International Code Council (ICC) and/or the American Concrete Institute (ACI), • High degree of proficiency in Microsoft Word, Excel and Outlook, • Functional knowledge of industry practices and regulations, NY State Building Code, and engineering standards, • Possess ability to maintain effective working relationships with managers, co-workers and clients through clear communication and proactive progress reporting, • Possess excellent organizational skills are necessary to be able to manage multiple projects, each with unique schedules and budgets, • Familiarity with construction materials, procedures and documents, • Must possess and maintain a valid driver’s license Compensation: $25 - 32/hour Benefits and Perks CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR MD92BrrrSw

Job DescriptionDescription: Project Manager – Precast Transportation and Underground Structures Design | Civil Engineering Lead Precast Infrastructure Projects That Shape Communities Are you an experienced Civil Engineering Project Manager skilled in precast concrete design, transportation infrastructure, and underground structure projects? Fisher Associates is seeking a dynamic Project Manager to oversee precast engineering projects from initial design through completion ensuring excellence in project delivery, client service, and technical quality. At Fisher, you’ll join a collaborative, people-first culture where your leadership drives innovation, strengthens client relationships, and delivers lasting infrastructure solutions that move communities forward. Apply today to lead meaningful projects and bring innovative transportation solutions to life. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery., • Successfully lead projects from initial setup, design, planning, safety analysis, and project kick-off., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Manage project budgets, scope, schedule, and staffing to stay on plan., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Lead transportation and underground structures precast design projects, ensuring compliance with industry, regulation, and safety standards., • Support the preparation of project proposals by collaborating with senior staff and technical teams., • Coordinate with design teams to develop detailed plans, specifications, drawings and bid packages., • Perform technical reviews and provide guidance to resolve design challenges., • Manage a project team, fostering a collaborative and productive work environment., • Assign tasks, monitor progress, and provide guidance to ensure project milestones are met. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Project Manager • B.S. degree in Civil Engineering, Master’s preferred, • 8+ years’ experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations)., • Precast project management experience, • Professional Engineering License (PE) preferred or ability to obtain it, • Familiarity with ACI 318, ACI 350, ASCE-7 and AASHTO codes, • Familiarity with IBC codes a plus, • Proficiency in AutoCAD & RISA 3D, • Proven Client relationship and business development experience, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job Description We are looking for a Sales Representative for PrevTech, a technology company that helps agricultural producers protect their facilities and improve herd health through advanced monitoring of their electrical systems. Based in the eastern United States (ideally near a regional airport), you will be responsible for developing PrevTech’s presence in the eastern U.S. market, with a primary focus on dairy producers. This role combines field prospecting, client relationship management, and strategic partnership development in a context of rapid growth. This is an entrepreneurial position for someone driven by results, someone proactive, ambitious, and eager to succeed. You’ll work closely with PrevTech’s leadership to bring an innovative solution to an emerging market. You’ll also benefit from a strong network of established relationships built through PrevTech’s long-standing partnerships across the industry. BUSINESS DEVELOPMENT AND PROSPECTION (70%) You will be responsible for developing PrevTech’s presence in the eastern U.S. market, focusing on direct outreach and building strong relationships with dairy producers : * Identify and approach new prospects within the dairy industry; * Present PrevTech’s solutions clearly and confidently, adapting your message to each client’s reality; * Leverage existing lead generation channels while creating your own business opportunities; * Plan and optimize your schedule efficiently, combining field presence and remote work in a way that maximizes impact across your territory; * Attend regional agricultural events and trade shows to increase brand awareness; * Maximize productivity while ensuring a solid presence across your assigned territory. SALES AND PIPELINE MANAGEMENT (25%) You’ll handle fast-paced, transactional sales cycles, taking each opportunity from prospecting to installation : * Qualify prospects and demonstrate the tangible impact of PrevTech’s solution on farm safety and performance; * Negotiate and close deals efficiently; * Coordinate the installation process and confirm client satisfaction; * Maintain light post-sale follow-ups to ensure a positive experience; * Collaborate with partner electricians and the internal team to ensure seamless operations. REPRESENTATION AND BRAND VISIBILITY (5%) As a PrevTech ambassador, you’ll help strengthen the company’s presence and reputation across your territory : * Represent PrevTech with professionalism at key industry events, fostering visibility and credibility within the agricultural community; * Build strong relationships with key partners (insurers, distributors, producer associations); * Position PrevTech as a trusted ally for prevention and herd health solutions; * Identify opportunities for collaboration or local partnerships. Key Competencies: * Negotiation * Business acumen * Verbal communication * Customer focus * Results orientation * Persuasion * Tenacity * Dynamism Requirements (Experience, Qualifications, Language): * Relevant experience in sales, business development, or field representation (agriculture background is a significative asset); * Interest or experience in the dairy production industry; * Ability to manage the full sales cycle, from lead generation to installation follow-up; * Comfortable using digital tools and CRM systems (Salesforce, Google Suite); * Excellent communication skills in English (spoken and written); * Valid driver’s license and willingness to travel frequently by car and plane. Role Challenges: * Building brand awareness in an emerging market; * Presenting an innovative technology to traditional producers and demonstrating its concrete value; * Adapting to different client profiles and sales cycles (transactional and corporate); * Managing frequent travel while maintaining consistency and performance; * Operating autonomously in a fast-paced, minimally supervised environment; * Maintaining high energy, discipline, and efficiency in a rapidly evolving sales context. Recent Achievements: * Over 4,200 installations completed with a 99.9% customer retention rate; * Deployment of advanced monitoring systems for parasitic voltage, improving herd health and performance; * Growing recognition from insurers and partners in the agri-food sector. Working Conditions: * Full-time position based in the United States (Eastern region); * Approximately 80% fieldwork combined with remote work for planning and follow-ups; * Compensation includes a base salary plus commissions. Total potential annual income: between USD 85,000 and USD 120,000, based on profile and performance; * A health and wellness allowance to support your well-being; * Company-provided laptop and cell phone; * Vacation allowance adjusted according to experience. Technological Environment: * Salesforce CRM for lead and opportunity management; * Google Suite for communication, document management, and coordination; * Internal tools used for installation tracking and customer satisfaction follow-up.

Job DescriptionDescriptionGreat opportunity for those with HVAC/construction industry experience! DWC Mechanical is looking to add a Preventative Maintenance Sales Consultant to join the sales team, developing sales opportunities for HVAC service. DWC Mechanical is a mechanical contractor that has been serving Western New York for over 30 years, becoming one of the most recognized and respected names in the area! OVERVIEW The PM Sales Consultant is responsible for promoting, selling, and providing technical expertise for commercial HVAC preventative maintenance service to clients. This role involves developing new business opportunities, maintaining relationships with existing customers, and ensuring technical solutions meet client needs and specifications. ResponsibilitiesESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Develop and execute a strategic plan to identify and generate new service sales opportunities., • Build relationships with property managers, facility directors, and end-users through cold calling, networking, and referrals., • Responsible for promoting, selling, and providing technical expertise for commercial heating, ventilation, and air conditioning (HVAC) maintenance service to clients., • Identify and generate new sales opportunities in the commercial HVAC market., • Develop and deliver technical presentations and proposals to clients., • Provide expert advice on HVAC products, systems, and solutions tailored to customer requirements., • Prepare detailed estimates, quotations, and proposals., • Collaborate with estimating, project management, and technical teams to ensure proper solution design, accurate scope and pricing., • Stay updated on industry trends, new products, and competitors’ offerings., • Achieve sales targets and contribute to the overall growth of the company., • Present professional proposals and deliver ROI messaging to prospective customers., • Maintain accurate records of opportunities, proposals, and pipeline activity using our CRM tools., • Coordinate internally for unit replacement opportunities arising from PM evaluations., • Monitor market trends and competition to identify strategic opportunities., • Attend industry networking events, association meetings, and bid walks, as needed. EDUCATION and/or EXPERIENCE • Bachelor's degree (B. A.) from a four-year college or university; or one to two years related experience and/or training; or equivalent combination of education and experience., • 3+ years of sales experience, ideally in HVAC, mechanical service, building automation, or facility management., • Proven ability to meet or exceed sales targets in a B2B environment., • Strong understanding of commercial HVAC systems and maintenance principles is strongly desired., • Experience working with service or construction contracts preferred.SUPERVISORY RESPONSIBILITIES The Sales Consultant collaborates with other members of the team to generate quotes but does not directly supervise others. COMPETENCIES To perform the job successfully, an individual should demonstrate the following competencies: Analytical - Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures. Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Project Management - Develops project plans; Coordinates projects; Communicates changes and progress; Completes projects on time and budget; Manages project team activities. Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service ; Responds to requests for service and assistance; Meets commitments. Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things. Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information. Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed. Delegation - Delegates work assignments; Matches the responsibility to the person; Gives authority to work independently; Sets expectations and monitors delegated activities; Provides recognition for results. Leadership - Exhibits confidence in self and others; Inspires and motivates others to perform well; Effectively influences actions and opinions of others; Accepts feedback from others; Gives appropriate recognition to others. Business Acumen - Understands business implications of decisions; Displays orientation to profitability; Demonstrates knowledge of market and competition; Aligns work with strategic goals. Cost Consciousness - Works within approved budget; Develops and implements cost saving measures; Contributes to profits and revenue ; Conserves organizational resources. Diversity - Demonstrates knowledge of EEO policy; Shows respect and sensitivity for cultural differences; Promotes a harassment-free environment. Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values. Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time; Supports organization's goals and values; Benefits organization through outside activities; Supports affirmative action and respects diversity. Strategic Thinking - Develops strategies to achieve organizational goals; Understands organization's strengths & weaknesses; Analyzes market and competition; Identifies external threats and opportunities; Adapts strategy to changing conditions. Judgment - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions. Motivation - Sets and achieves challenging goals; Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence; Takes calculated risks to accomplish goals. Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Organizes or schedules other people and their tasks; Develops realistic action plans. Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments. Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly. Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions ; Uses equipment and materials properly. Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays or unexpected events. Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time. Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals. Completes tasks on time or notifies appropriate person with an alternate plan. Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. Innovation - Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Develops innovative approaches and ideas; Presents ideas and information in a manner that gets others' attention. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages and area. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. COMPUTER SKILLS Proficiency with CRM applications (Salesforce, HubSpot), Microsoft Office 365 applications, and AI tools. CERTIFICATES, LICENSES, REGISTRATIONS Valid driver’s license with a clean driving record and willingness to travel locally for in-person meetings and site visits, may occasionally be called upon to perform overnight travel. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to operate a motor vehicle; sit; use hands to finger, handle or feel; reach with hands and arms and talk or hear. The employee is frequently required to stand and walk. The employee must be able to set up, climb and descent a 28’ extension ladder. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. Benefits • Competitive pay, • Comprehensive health insurance (including dental and vision), • Health Saving Account with company contribution, • Paid Life Insurance, • 401(k) plan with company matching, • Generous paid time off, • Paid Holidays, • Professional development assistance, • Employee discount

Job Description Job Title: Registered Nurse Reports to: Chief Nursing Officer FLSA Status: Non-Exempt Summary: CNY Fertility is a renowned fertility center offering advanced treatments like IVF, IUI, and egg freezing. With a patient-centered approach and cutting-edge technology, we support individuals and couples on their journey to parenthood. Our Registered Nurse Performs patient-specific duties in the area of fertility including patient care, teaching, triage, procedures, and protocol in a clinical and operating room setting under the direction of the physician by performing the following duties. Required Duties and Responsibilities: Include the following. Other duties may be assigned. * Performs phlebotomy successfully. * Collects and labels specimen as outlined in lab orders/requisitions. * Transports specimens to the lab promptly for testing. * Starts, maintains, and discontinues IV lines. * Administers medications and follows medication protocols. * Provides patient educations and medication administration teaching. * Triages patient problems, questions, and concerns to the appropriate area. * Maintains factual and thorough health care records. * Communicates, reviews, and records all laboratory results. * Performs transvaginal and abdominal follicular and prenatal ultrasounds. * Monitors and manages fertility treatment cycles under the direction and supervision of physicians. * Performs intrauterine infusions. * Supervises all licensed practical nurses and medical assistants. * Participates in staff development, nursing conferences, infectious disease classes, and continuing education pertaining to area of expertise. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High school diploma or general education degree (GED); and one year of technical training. Must be a graduate of an approved registered nursing program. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Math Ability: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Knowledge, Skills and Other Abilities: * Medical Terminology * Demonstrate proficiency in injections * Demonstrate proficiency in venipunctures * Demonstrate proficiency in administering oral medications * Time management skills Certificates and Licenses: State Registered Nurse License CPR/BLS Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands; reach with hands and arms and talk or hear. The employee is occasionally required to sit. Benefits include: · 401(k) · Dental insurance · Vision Insurance · Health Insurance · Life Insurance · Flexible spending account · Paid time off · Maternity Leave

Job DescriptionDescription: Precast Senior Designer- Civil/Structural Precast Senior Designer – Lead Concrete Design & Mentor Future Engineering Leaders Are you passionate about precision structural engineering and modern precise infrastructure design? Fisher Associates is seeking a Precast Senior Designer to spearhead the development of efficient, sustainable, and code-compliant precast and prestressed concrete solutions. You will provide technical direction, support and guide multidisciplinary design teams, and uphold the highest standards of performance, constructability, and quality. Your expertise will drive transportation and structural infrastructure projects that enhance and strengthen communities. Apply today to elevate your career in precast concrete design leadership and help shape the future of infrastructure engineering. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Maintain up-to-date knowledge of codes, technologies, and advancements in the precast-prestressed field., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-HYBRID Requirements: What You Bring, Your Expertise as a Precast Senior Designer • 10 plus years of precast design experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations)., • B.S. degree in Civil Engineering preferred; equivalent relevant experience will be considered, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) a plus but not required, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions