Trabajos Construction & Trades en West Valley City, Utah - Page 9Crear alertas

Job Description Fisher Industries is a vertically integrated family of businesses that provides heavy civil construction and aggregate products across the United States. With over 70 years of experience, the company specializes in highways, bridges, aggregates, and large-scale infrastructure projects, supported by in-house capabilities in drilling, blasting, crushing, asphalt, and concrete production. Fisher is committed to delivering innovative, cost-effective solutions with an emphasis on safety and quality. As a proven industry leader, Fisher Industries continues to grow while maintaining the integrity and values of a family-owned company. For additional information about our company, visit our website at POSITION SCOPE The General Laborer will be responsible for general laborer duties at the operation and perform tasks involving physical labor. This position requires the willingness to travel to the job site locations and to lodge near the job site. Position requires ability to pass a Federal Firearms background check to assist in the handling of explosives and requires the ability to pass a criminal background check to gain access to government worksites. Extensive overnight travel is required. This position will work under the Arizona Drilling & Blasting Division of Fisher Sand & Gravel, Co. PRIMARY DUTIES • Work as a part of a crew focused on safety, • Assist as required in all manual labor aspects of the project as directed by supervisor, • Perform physically demanding construction duties, • Safety, Safety, Safety comply with all company policies, procedures, and standards of safety, • Frequently Carrying items or objects weighing up to 50 lbs., • Complete work tasks under various adverse weather conditions including heat above 100 degrees, cold, rain, and snow, • Operating equipment in adverse weather conditions and on steep and rough terrains, • Perform other duties as assigned REQUIREMENTS • Applicants must be at least 18 years old, • High School Diploma or Equivalent, • Valid Driver's License and reliable transportation to get to and from work is required, • Acceptable MVR in accordance with Fisher's Company Vehicle Program policy is required, • M.S.H.A. 5000-23 certificate part 48 or willingness to obtain certification - company will pay for certification, • Must be able to successfully pass a pre-employment drug test and physical, • Must be able to pass a Federal Firearms background check, • Must be able to pass government background check to gain access to government job sites, • Ability to repeatedly walk up and down steep and rough terrain carrying construction materials, • Punctuality is required, • Must be a team player who is willing and able to learn, • Must be able to frequently lift up to 50 lbs., • Extensive overnight travel is required Fisher Industries is an Equal Opportunity Employer. We are a drug-free work environment requiring pre-employment and random drug testing. Subject to background check. If you require an accommodation with applying, please email or call the HR Department at (701) 456-9184 to request accommodations. This email is only to request accommodation for the application process and is not an email to inquire about the status of your application. Job Posted by ApplicantPro

Job Description Location: Salt Lake City, UT Employment Type: Full-Time Pay Range: $25.00 – $30.00 per hour (DOE) Schedule: Monday–Friday | Day Shift | Overtime as needed Position Overview We are seeking an experienced Sheet Metal Fabricator to join our sign manufacturing team at Impact Signs. This role is responsible for fabricating, assembling, and finishing sheet metal components used in custom signage. The ideal candidate has strong technical skills, attention to detail, and experience working in a fast-paced production environment. Minimum Qualifications * 3+ years of professional sheet metal fabrication experience (required) * Experience cutting, bending, forming, and assembling sheet metal * Ability to read and interpret shop drawings, blueprints, and work orders * Proficiency with shop equipment such as press brakes, shears, saws, grinders, and hand tools * Strong attention to detail and quality standards * Ability to lift up to 50 lbs and stand for extended periods * Reliable attendance and punctuality Preferred Experience (Not Required) * Experience in sign manufacturing or architectural metal fabrication * Welding experience (MIG/TIG) * Experience working with aluminum, steel, and stainless steel * Familiarity with custom or short-run fabrication projects Key Responsibilities * Fabricate sheet metal components for custom signs and structures * Measure, cut, bend, and assemble materials per specifications * Operate fabrication machinery safely and efficiently * Maintain a clean and organized workspace * Collaborate with production and installation teams to meet deadlines * Follow all company safety policies and procedures Compensation & Benefits * Hourly pay between $25–$30/hour, based on experience and skill level * Overtime paid in accordance with Utah and federal law * Benefits options available: vision, dental, PTO, etc. * Stable, year-round work in a growing sign manufacturing shop Employment Classification & Legal Notice This position is non-exempt and eligible for overtime pay in accordance with the Fair Labor Standards Act (FLSA) and Utah wage laws. Employment is at-will, meaning either the employee or the company may terminate employment at any time, with or without cause or notice, as permitted by law. Equal Opportunity Employer We are an Equal Opportunity Employer and do not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable law.

Job Description Job Summary: A reputable engineering and inspection services firm is seeking a qualified ICC Special Inspector with expertise in reinforced concrete and/or other structural materials. The ideal candidate will be experienced in field inspections related to structural steel welding, bolting, masonry, concrete, and/or grading. This role involves site inspections, accurate reporting, and coordination with internal teams and client representatives. Key Responsibilities: • Conduct field inspections of construction materials such as concrete, masonry, soils, structural steel welding, and bolting., • Read and interpret construction drawings and applicable building codes., • Maintain complete and accurate records, including inspection reports, RFIs, and correspondence., • Communicate effectively with project managers and client contacts to ensure compliance with project requirements. Requirements Qualifications: • ICC Special Inspector certification(s) required (e.g., Reinforced Concrete, Structural Steel & Bolting, etc.)., • Minimum 3 years of experience in construction materials testing and inspection., • Proficient in digital documentation tools (e.g., Dropbox, laptop-based reporting)., • Familiarity with jurisdictional reporting requirements (training can be provided)., • Associate’s or Bachelor’s degree preferred but not required., • Valid driver’s license with a clean driving record required., • Strong communication and organizational skills., • Attention to detail and the ability to work independently in the field., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity)

Job Description Salt Lake Valley Auto Group is looking to add a few Service Technicians to our teams at Salt Lake Valley Buick GMC in Salt Lake City Utah! If you are currently a technician not earning over $100,000/year you should keep reading! Are you looking for a new opportunity and chance to grow your career while enjoying a work-life balance? Tired of not being appreciated for your unique skill set? We provide a great work and learning environment for Technicians with continuing education, hands-on training, and strong apprenticeship mentoring program. Current Available Positions: Lube Technicians Technician Apprentice Used Car Inspection Technician EV Experienced Technician Experienced Service Technician Heavy Line Technician Medium Duty Technician Transmission Technician Master Service Technician Technician Specific Benefits • Productivity Bonus paid monthly, • Upsell Spiffs paid monthly, • 4 X 10 hour shifts a week possible, • Tenure Bonus paid on Anniversary dates, • Higher than industry and local standard pay, • Shop equipped with the newest technology, • Uniforms provided, • Discounts on products and services, • Highly productive shop, • Career advancement opportunities, promote from within, • ASE and state inspection certification reimbursement and all training expenses paid to further your career, • Continued education, manufacturer hands on and web-based training, • Health, Medical and Dental, • 401(K) Plan, • Paid time off and vacation, • Growth opportunities, • Employee vehicle purchase plans, • Family owned and operated, • Long term job security, • Perform work specified on the repair order with efficiency and in accordance with dealership., • Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment., • Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Communicate directly with the Service Advisor so that customers are informed if any additional service is needed. Provide an estimate of time needed for additional repairs., • Some Service shop experience required, • Dealership experience preferred but not required, • High school diploma or equivalent, • Dexterity, requiring a steady hand, excellent hand-eye coordination, • Mechanical and troubleshooting skills, • Excellent customer service skills, • Basic computer competencies, • Positive, friendly attitude, along with a customer service mentality, • Enjoy working in a fast-paced environment, • Team player with ability to collaborate with others effectively, • Ability to learn new technology, repair and service procedures and specifications, • Able to operate electronic diagnostic equipment, • Valid driver's license and clean driving record

Job DescriptionSalary: $24 - $28 The Construction CDL Truck Driver is a skilled craft position responsible for operating dump trucks with different trailer combinations to haul soil, gravel, and other aggregate materials to and from various job sites in a timely manner. This position may also perform a wide variety of tasks, transferring from one task to another as the workflow dictates. Whitaker Holdings is a 100% employee-owned (ESOP) family of companies with over 70 years of experience in heavy civil construction, underground utilities, and telecommunications. Whitaker Holdings encompasses multiple companies, including Whitaker Construction, DasCo of Idaho, Advanced Cable Technology, and Bighorn Traffic Services. Operating across Utah, Idaho, Nevada, Wyoming, Colorado, Oregon, and beyond, our companies are united by four core values Value Safety, Embrace Ownership, Be Honorable, and Elevate Team which guide how we work, how we treat each other, and how we deliver quality results on some of the most challenging projects in the region. Roles and Responsibilities: Including but not limited to the list below. • Comply with all safety policies, procedures, and standards of safety., • Verify the types of materials being transported and ensure that they do not exceed weight restrictions., • Ensure that materials are loaded correctly onto the truck and trailer., • Perform pre-trip and post-trip inspections on trucks pursuant to DOT regulations., • Maintain the vehicle to ensure safe operating conditions, including daily inspections of tires, lights, signals, glass, etc. Vehicle fluids and tire air pressures must be checked and serviced daily., • Observe all traffic laws., • Ensure the vehicle is ready for the next days business, including fuel fills, whenever possible., • Show constant awareness of personal safety and the safety of all co-workers and surroundings., • Safely transport various construction aggregate materials to various job sites as dispatched., • Operate dump trucks equipped with different trailer combinations such as side-dumps, end-dumps, and flatbed trailers., • Clean out trailer beds to prevent cross-contamination., • Be flexible with schedule and location changes, as well as shift time changes., • Other duties and responsibilities may be assigned by supervisors. Skills and Qualifications: • High School Diploma or GED preferred. Any vocational training is strongly desired., • Those with an education and/or work-related credential from a secondary or post-secondary educational system will be given preferred interview status (Precision Exams, NOCTE, etc.)., • Must hold a Class A CDL with Tanker endorsement., • Ability to operate construction transport vehicles such as water trucks, dump trucks, side dumps, belly dumps, and flatbeds., • Must hold a valid Medical Card per Department of Transportation (DOT) standards., • A clean driving record is required., • Must abide by all DOT requirements for commercial motor vehicle operations., • Must follow verbal and written instructions., • Must have maneuvering and backing skills., • Must maintain accurate time and material records through drivers daily logs., • Ability to operate the truck safely and efficiently., • Willingness to learn., • Excellent written and verbal communication skills and ability to apply common sense understanding to carry out the essential functions of the job., • Ability to work effectively in a team environment., • Reliable transportation to get to and from work. Physical Requirements: • Able and willing to work long hours including day, night, and weekend shifts as needed, and work outside of normal hours., • Able to sit, walk, lift, reach, stoop, stand, grasp, balance, climb, kneel, crouch, and lift up to 50 pounds occasionally., • Able to work in outside environments being subjected to weather changes, noise, vibrations, moving mechanical parts, and job hazards., • Ability to do physical labor and other strenuous physical tasks. Whitaker Construction offers an exceptional benefits package including: • Employee Stock Ownership Plan (ESOP). Employees earn shares in the company All employees have ownership in the company and its success., • Competitive wages., • Health, Dental, Vision, Life, Short Term Disability, Supplemental Insurance., • 401K and Match., • Paid Holidays., • Paid Personal Days., • Quarterly Incentive Program (profit sharing)., • Referral Bonuses., • Employee Assistance Program (EAP). Reasonable Accommodation Statement The ADA defines reasonable accommodation as a change or adjustment to a job or work environment that allows a qualified individual with a disability to satisfactorily perform the essential functions of a particular job, and does not cause an undue hardship for the employer. Whitaker Construction is an equal opportunity employer. Whitaker will not discriminate and will take affirmative action measures to ensure against discrimination in employment, recruitment, advertisements for employment, compensation, termination, upgrading, promotions, and other conditions of employment against any employee or job applicant on the bases of race, creed, color, national origin, or sex. Women and minorities are encouraged to apply.

Job Description Urgently hiring Precision Tune Auto Care is hiring experienced automotive technicians who want a busy shop. What are you looking for? Flexible hours? Being paid for the work you do? Tons of cars and a lot of productive time? Excellent benefits, including medical? Family-owned business? We can offer all of these things, and we want to talk to you! Our business is growing, the opportunity is huge, and we will pay very competitive hourly rates. Precision Tune Auto Care is proud to offer: • Top industry pay - Competitive hourly wage based upon experience, • High car count and plenty of productive time available, • Medical and dental insurance, • Paid time off Our company strives to provide outstanding customer service and high-quality work at a great value. We are seeking enthusiastic, passionate team members who want to build a career with a growing company. Automotive technician duties include diagnosing and performing repairs on all vehicle components (e.g. brakes, emissions/exhaust, A/C, suspension, electrical, etc). You will also need to be able to explain mechanical diagnoses and needed repairs to non-mechanical individuals, which may include teammates and customers. In addition, we want you to continuously improve your technical knowledge. Qualifications include: • General Service Tech - Minimum of 1 year of automotive technician/repair experience, • Must have valid driver’s license, • Ability to multi-task in fast-paced environment, delivering quality work, • Ability to work a flexible 5-day schedule including Saturdays, • High school degree or GED equivalent preferred, • Be able to pass background check Job Type: Full-time Experience: Benefits: • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • 10 hour shift, • 8 hour shift, • Day shift, • Overtime

Job DescriptionDescription: HVAC Sheet Metal Laborer Job Description Innovative Sheet Metal (ISM) is currently seeking a dependable and hardworking Laborer to support our commercial HVAC sheet metal crews in Salt Lake City and the surrounding areas. This is an excellent opportunity for someone looking to get into the trades and build a long-term career in construction. This position is ideal for a motivated individual who is willing to learn, work hard, and help keep job sites running smoothly. There is strong potential for advancement into an Installer Apprentice role for the right person. Responsibilities • Maintain a clean and safe jobsite, including sweeping, trash removal, and general cleanup., • Assist crews by retrieving tools, materials, and equipment as needed., • Move and stage sheet metal materials and jobsite supplies., • Help load and unload trucks and organize materials., • Support basic demolition and removal work when needed., • Follow all company safety policies and jobsite requirements., • Work as part of a team and take direction from foremen and lead installers. Additional Information BENEFITS: • 100% company-paid medical insurance, • Optional supplemental dental and vision insurance, • Construction experience is helpful but not required (entry-level welcome)., • Dependable and able to work a consistent 40-hour work week., • Willingness to learn and take direction., • Strong work ethic, positive attitude, and ability to work well with others., • Ability to lift 50+ lbs and perform physical jobsite work., • Valid driver’s license and reliable transportation required., • Must pass a drug screening and criminal background check.

Job Description Lula is looking for a 1099 Landscaping and Lawn Pro to help with property maintenance of several thousand rental properties across the Salt Lake City area. We are seeking individuals who have experience in the rental property industry and has an eager attitude. What is Lula? Lula is a service designed for property managers to eliminate the hassle of managing and coordinating maintenance, improve the resident experience, and reduce maintenance costs for property owners. Lula works hand-in-hand with our service-provider partners to ensure everyone gains. Unlike other platforms, Lula has been designed from the ground up to work with your needs and answer your concerns. Whether you are a mom-and-pop small business or an international corporation, there are many reasons why joining the Lula Network is a good idea for your company. Apply Here: BENEFITS WITH LULA: -Lula delivers real jobs, not leads -Set your own hourly rates -24/7 phone and text support for Lula Pros -New jobs available daily -Choose only the jobs you want -Paid for labor and parts within 1-3 days REQUIREMENTS: -Must be 18 or older -Must have General Liability Insurance -No felonies within the past 7 years -Be friendly, respectful, and punctual -Must provide your own tools and materials -Must complete vendor onboarding and be approved Please email with any questions

Job Description Join our team as a Master Auto Technician at Sexton Offroad in Salt Lake City, UT! This master-level role is for a highly experienced technician who excels in both complex mechanical diagnostics and repair, as well as precision custom fabrication, playing a crucial part in restoring classic vehicles and building elite off-road machines. We are proud to offer our Master Auto Technician, $50,000–$100,000 per year, depending on experience and comprehensive benefits, including: • Health, dental, and vision, • Life, • A flexible spending account (FSA), • A health savings account (HSA), • A 401(k), • An employee assistance program (EAP), • Opportunity for advancement, • Employee discounts, • Paid time off and holidays, • Ongoing training and certification support THE VITAL ROLE YOU HAVE AS OUR MASTER AUTO TECHNICIAN: You spend your time diagnosing and repairing complex mechanical, electrical, hydraulic, and drivetrain systems. You execute precision TIG/MIG welding and custom fabrication, building and modifying components for suspension, body, and chassis systems. A key part of your expertise involves diagnosing and rebuilding carbureted and fuel-injected engines (gas and diesel) and troubleshooting 4x4 drivetrains, gears, and differentials. As a lead expert, you mentor Level I and II technicians, enforce shop standards, and interpret complex schematics. You also communicate estimates and project updates to customers, support general shop operations (installation, testing), and maintain a clean, organized workspace. Would you excel in this position? Here's what you need: • 7+ years of experience as a mechanic/fabricator in a custom or performance shop environment, • Master-level skill in fabrication, welding, and custom installation, • A valid driver's license with an insurable record, • A deep understanding of drivetrain, electrical, and suspension systems, • A professional attitude and excellent communication skills, • Comfortable working in a variety of shop conditions (heat, cold, noise), • Ability to lead by example, manage projects, and mentor junior team members, • Ability to lift, maneuver, and position heavy components (with or without assistance), • Ability to work occasional weekends or evening shifts, • Ability to read, write, and communicate in English, • Possesses professional-grade hand tools and equipment appropriate for this level, sturdy work boots, and eye protection for fabrication, grinding, welding, and similar tasks ABOUT US AT SEXTON OFFROAD Sexton Offroad has been a cornerstone of the off-road community since 1992. Our dedicated shop is here to assist customers with an array of services, from installing lifts and other parts to fitting new tires and restoring classic Ford Broncos. We are truly passionate about off-road vehicles, and we take great joy in helping our customers realize their dream rides. With a vast selection of parts and accessories, along with outstanding restoration services, our customers keep coming back for more! We are deeply committed to our craft and take pride in delivering quality work, which is why we aim to build a team that shares this passion. When you become part of our shop, you join a talented and supportive team focused on mutual success. Our employees benefit from competitive compensation, generous benefits, and a low-drama work environment that fosters both personal and professional growth. Ready to take on this Master Auto Technician role? You can start with our short and easy mobile-friendly application right now. Don't miss this opportunity-apply today! Job Posted by ApplicantPro

Job DescriptionRaba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: • Community "We care for our communities", • Integrity "We act with integrity", • Passion "We infuse passion into everything we do", • Quality "We believe quality comes from a culture of innovation and continuous improvement", • Growth "We dedicate ourselves to personal and business growth" Raba Kistner is seeking a detailed-oriented, dependable Senior Construction Inspector I to join our Infrastructure team in the Midvale, UT area. This individual oversees construction inspection activities to ensure compliance with project plans, approved shop/working drawings, project documents, and specifications reporting observations orally and in writing to direct report. This position requires application of engineering principles, keeping in alignment with established procedures. Others responsibilities include: • Prepare and submit accurate, legible, comprehensive and complete testing and/or inspection reports on a daily basis in accordance with established quality procedures., • Review plans, specifications, general notes and shop/working drawings for assigned activities prior to performing assigned duties., • Perform, supervise, and report on frequency compliance and coordinate field tests on materials and completed work using standard methods established by AASHTO, ASTM or other agency with appropriate, properly calibrated testing equipment., • Train and serve as a lead worker for less experienced workers; assigning work priority tasks., • Assist direct report in planning and coordinating inspection operations., • Meet with contractor’s supervisors or other project leaders on project sites to discuss and coordinate testing, sampling, or inspection of construction materials or construction procedures., • Review materials tests and completed work performed by inspectors to ensure compliance with requirements of established procedures., • Verify adequacy of samples and locations at which samples are collected to ensure representative distribution of sampling and testing., • The safe utilization, storage, and maintenance of all documents and tools, including company vehicle., • Maintain effective working relationships with internal and external personnel., • Work closely with direct report to establish priorities and deadlines, as well as provide updates on progress or delays of tasks or assignments., • Understand, adhere, and participate in the Raba Kistner Health & Safety and BBS Programs, setting a good example of our safety standards., • High School Diploma or GED required., • Generally, but not necessarily must have a minimum of 15 years’ experience in roadway and related facilities, construction inspection or NICET Level IV certification in Transportation Engineering Technology (Highway Construction). The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is regularly required to sit, stand, walk, climb, balance, stoop, kneel, crouch, stop, and talk. Frequently required to lift and or move 70 pounds. You will frequently be required to use hands and reach. Specific vision abilities required by this job include close vision, far vision, color vision, peripheral vision, focus vision and depth vision. The noise level in the work environment is usually moderate to loud. The work environment for this position potential exposure to movement of heavy equipment on construction or roadway sites; potential exposure to hazardous dangerous chemicals and solvents, noise, dust, fumes, grease and oils, radiant and electrical energy, and vibration; all of which would require employee to follow proper safety procedures and utilize appropriate protective equipment. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. Work may require out-of-town/overnight travel to Raba Kistner offices, client offices, and project locations. EOE/Disabled/Veteran Drug Free Workplace

Job Description Responsibilities A Body Shop Mechanic will repair or replace damaged body parts back to Pre-Accident Condition with factory and dealership specifications. Quality repair need to meet or exceed the original factory fit and finish. The end result should be an invisible repair. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Review each repair order, work order, and estimator’s notes to understand repairs needed prior to beginning work on the vehicle., • All repairs must be completed according to the documentation on the repair order or the supplement., • Knowledge of the manufacturer’s and technical repair process., • Ability to use frame and measuring equipment per vendor procedures., • Perform initial teardown of vehicle., • Identify parts for cut-in and edging., • Perform all repair procedures according to factory specifications and company policy. I-Car Standard., • Perform and sign-off on all quality check before sending vehicle to paint department., • Re-assemble painted vehicle and painted parts., • Perform a final quality check and review of work order prior to sending the vehicle to the detail department., • Work with apprentice or lesser skilled technicians in developing repair skills. Benefits: * We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • 2+ years’ body shop experience., • Valid driver’s license and insurability. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Founded in 1984, Firetrol is the national leader in fire protection & life safety services. We are currently seeking skilled Fire Alarm Inspector to join our team of the best fire protection professionals in the industry. • Perform routine inspections, testing, and preventative maintenance of fire protection systems with minimal supervision, • This role requires regular face-to-face interaction with customers in locations like hospitals, nursing homes, k-12 education, colleges, restaurants, military installations, government buildings, commercial buildings and multi-family residential properties. Contact with members of the public may also occur with varying frequency depending on the type of facility where inspections are performed., • Excellent verbal communication skills required to work with customers, technicians, sales personnel, and managers., • Work independently, as well as, with other team members., • Diagnose and evaluate systems that require servicing as well as troubleshoot issues that arise during inspections, • Properly document all inspections and other information needed to perform repairs, • Provide detailed reports and recommended corrective actions to the customer, • Must possess or be willing to obtain any applicable state licenses., • Proven record of providing excellent customer service and care, • Valid Drivers License, • Pass a drug Test, • Pass a background check Firetrol offers competitive wages and top-of-the-line benefits that include health, dental vision, life insurance, short and long term disability, generous paid time off practice and a 401(k) plan with a generous company match and immediate vesting. Additionally, sponsors training and education opportunities. Finally, Firetrol offers career growth opportunities, not just a job.

Job Description Automotive Service Technician Rifle, CO | Full-Time | $30–$40 per flagged hour About the Role This position is based in Rifle, CO. Salt Lake City-area applicants must be willing to relocate. Our shop offers a supportive team, flat-rate pay, and a modern, trusted environment serving Garfield County, Rio Blanco, and Mesa counties. We’re seeking an Automotive Service Technician with strong gas and diesel diagnostic skills, the ability to work independently, and ASE certification (or willingness to certify). Mentoring junior techs is a plus. Compensation & Schedule • $30–$40 per flagged hour (based on experience and certifications), • Paid holidays and vacation, • Ongoing ASE training and certification opportunities, • Clean, modern, well-equipped shop, • Supportive, family-friendly team, • Relocation support for Salt Lake City-area applicants, • Diagnose and repair gas and diesel vehicles (engines, transmissions, brakes, suspensions, electrical systems), • Troubleshoot using diagnostic tools and software, • Perform routine maintenance and inspections, • Conduct accurate estimates and ensure work meets safety and quality standards, • Maintain a clean, organized, and safe workspace, • 5+ years professional automotive repair experience (gas and diesel), • ASE Certification preferred (or ability to obtain within 6 months), • Knowledge of modern diagnostic equipment and software, • Valid driver’s license with a clean record, • Own professional-grade tools, • Strong communication and problem-solving skills, • Experience with Duramax, Powerstroke, or Cummins, • Familiarity with Asian and domestic vehicles Keyword Bed Automotive Service Technician, Auto Technician, Diesel Mechanic, ASE Certified Technician, Gas and Diesel Vehicles, Vehicle Diagnostics, Flat-Rate Technician, Routine Maintenance, Advanced Repairs, Vehicle Inspections, Troubleshooting, Automotive Repair #hc201529

Job Description Master Automotive Service Technician Rifle, CO | Full-Time | $45–$60 per flagged hour About the Role This position is based in Rifle, CO. Salt Lake City-area applicants must be willing to relocate. Our shop offers a supportive team, flat-rate pay, and a modern, trusted environment serving Garfield, Rio Blanco, and Mesa counties. We’re seeking a Master Automotive Service Technician with strong gas and diesel diagnostic skills, the ability to work independently, and ASE certification (or ability to obtain quickly). Mentoring junior techs is a plus. Compensation & Schedule • $45–$60 per flagged hour (based on experience and certifications), • Paid holidays and vacation, • Ongoing ASE training and certification opportunities, • Clean, modern, well-equipped shop, • Supportive, family-friendly team, • Relocation support for Salt Lake City-area applicants, • Enjoy Colorado’s Western Slope lifestyle: hiking, skiing, fishing, and rafting Key Responsibilities • Diagnose and repair gas and diesel vehicles (engines, transmissions, brakes, suspensions, electrical systems), • Troubleshoot complex systems using diagnostic tools and software, • Perform routine maintenance and advanced repairs to meet safety and quality standards, • Mentor junior and Level B technicians as needed, • Maintain a clean, organized, and safe workspace, • 7+ years professional automotive repair experience (gas and diesel), • ASE Certification required (or ability to obtain quickly), • Expert knowledge of modern diagnostic equipment and software, • Valid driver’s license with a clean record, • Own professional-grade tools, • Advanced experience with Duramax, Powerstroke, or Cummins, • Familiarity with Asian and domestic vehicles, • Colorado emissions repair experience (bonus) Keywords Master Automotive Service Technician, Auto Technician, Diesel Mechanic, ASE Certified Technician, Gas and Diesel Vehicles, Vehicle Diagnostics, Flat-Rate Technician, Advanced Repairs, Vehicle Maintenance, Troubleshooting, Mentoring, Automotive Repair #hc201530

Job Description Your role as an A&P Mechanic at our client's academy is crucial for maintaining the highest maintenance standards for our aircraft fleet. Working with the flight operations team, you will ensure the safety and operational efficiency of our aircraft, demonstrating our commitment to excellence in the aviation sector. Responsibilities • Repair, modify, and make alterations to worn or defective assemblies, • Follow approved maintenance procedures and consult FAA-approved technical data, • Inspect completed work to ensure it meets prescribed standards, • Perform serviceability tests on repaired components using specified test equipment, • Complete necessary documentation and submit work for inspection, • Account for time, materials, and tools used in maintenance activities Qualifications • Current A&P license and high school diploma or equivalent with aircraft maintenance courses, • Minimum of 2 years experience as an Aircraft Maintenance Technician on general aviation aircraft, • Possess required tools for the role, • Strong communication, organizational, and problem-solving skills, • Knowledge of FAA requirements for aircraft maintenance procedures, • Previous work experience with SLSA and Diamond aircraft is preferred, • Additional hourly pay for IA certification Don't miss this opportunity to contribute to the next generation of aviation with a supportive team and competitive benefits package, including medical, dental, vision, and 401k match. Apply now to be part of our client's dynamic team!

Job Description Position: Cook - Hilton Garden Inn, Salt Lake City, Utah (Weekend Part- Time) Job Description: The Line Cook is responsible for production, preparation and presentation of all food for the hotel and in a safe, sanitary work environment which conforms to all standards and regulations in a profitable, competitive, quality manner. Required Skills and Requisites: • Must possess culinary knowledge and skills, • Service orientation. Knowledge of principles and processes for providing customer and personal services., • At least 3 years of cooking experience preferably in a high volume, quality culinary environment., • Prepares food according to specifications, works line in stations as needed., • Prepares all food in the hotel in a safe, sanitary, and cost effective manner., • Maintains the maintenance/sanitation of kitchen, equipment and related areas to ensure a healthy, safe work environment which meets/exceeds federal, state, corporate and franchise standards and regulations. Palette Hotels, is an equal opportunity employer with policies prohibiting unlawful discrimination on the basis of any protected classification under applicable local, state and/or federal laws, which can include race, color, creed, sex, national origin, age, veteran status or physical or mental disability unrelated to job requirements. Palette Hotels policies also provide for a drug-free workplace, where the use, possession, or influence of illegal drugs or alcohol while on company time is generally prohibited. An employee's use (or abuse) of legally prescribed medication may also implicate company policy, where it impairs judgment or work performance or otherwise creates workplace safety risks. Palette participates in E-Verify to confirm that you are authorized to work in the U.S. only after a job offer is accepted and Form I-9 is completed. For more information on E-Verify, please visit the Everify website.

Job Description ob Summary: We are seeking a skilled and detail-oriented Automotive Transmission Technician with proven experience in diagnosing, repairing, and rebuilding both automatic and manual transmissions. The ideal candidate will have a deep understanding of drivetrain systems and a commitment to delivering high-quality workmanship. Key Responsibilities: * Diagnose transmission problems using diagnostic tools and test equipment. * Remove, disassemble, inspect, and reassemble transmissions. * Repair or replace faulty components (e.g., clutches, gears, seals, torque converters). * Perform transmission fluid flushes and maintenance services. * Work on both automatic and manual transmissions (including CVTs and DCTs). * Road test vehicles to ensure proper repair and function. * Maintain detailed records of work performed and parts used. * Collaborate with service advisors and other technicians to provide excellent customer service. * Adhere to all safety and environmental regulations. Qualifications: * 3+ years of experience as a transmission technician or similar role. * Certification from ASE or other recognized automotive training programs preferred. * Strong mechanical aptitude and problem-solving skills. * Proficient in the use of diagnostic tools and service software. * Valid driver’s license and clean driving record. * Ability to work independently and as part of a team. * Attention to detail and a commitment to quality. Preferred Experience: * Working with specific brands (e.g., GM, Ford, Dodge, Jeep, Toyota). * Familiarity with electronic transmission control systems. * Experience with performance or high-output transmission builds. Work Environment: * Full-time, typically in a dealership, repair shop, or transmission specialty center. * Physical work requiring lifting, bending, and standing for extended periods.

Job Description We are seeking an experienced Tank / Welding Foreman to join our team. You will help drive high-quality and on-schedule Tanks completions through efficient management of people and equipment of exciting industrial construction projects across the nation. Come help us build America! * Subsistence paid depending on location $500 to $700 weekly Health care benefits Vacation / 401K Wage is Based on Experience Safety and Quality are our top priorities RESPONSIBILITIES SAFETY · Model and ensure safe work practices at all times, compliant with GBI and customer requirements PEOPLE · Provide daily leadership and focus on strong work ethic and positive morale for crew. · Handling of relevant employee discipline and/or coaching needs in a timely manner. · Daily recognition of employee accomplishments. PROCESS · Ensure job site organization and housekeeping goals are met. · Ensure adherence to all company and customer policies and procedures by crew. PRODUCTION · Help drive crew productivity · Other duties as assigned. Requirements Qualifications: • 1+ years experience construction tanks, • Strong safe work performance including use of proper PPE and adherence to company safety policies., • Current TWIC card, • Proven history of dependable work practices and strong work ethic, • Certification in forklift and crane operation as well as welding techniques, • Ability to multi-task and to work independently and with minimal direction, • Proven ability to communicate effectively in writing, verbally and in-person using English language, • Ability to work a flexible work schedule and travel as required., • Ability to routinely perform physical duties including but not limited to lifting up to 50 lbs., climb stairs and ladders, standing and walking for periods of time, working in confined spaces, and occasional work in inclement weather., • Health, • Vision, • Dental, • Life, • 401K, • PTO

Job Description Service Technician/Mechanic Karl Malone Plaza Cycle Karl Malone Group is seeking a full-time Experienced Service Technician to work in a Certified shop. As a member of our team, you will help support customers through the timely repair and delivery of their vehicle. Responsibilities • Perform duties per repair order with efficiency and accuracy. This may include but is not limited to the repair of vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Test a vehicle’s components, and systems using necessary test drives, diagnostic tools, and special service equipment., • Communicate directly with the Service Advisor regarding the vehicle’s status and any additional needs. If additional repairs are needed, provide an estimate of the time needed for those repairs., • Complete all tasks assigned in a timely manner and maintain accurate records of all maintenance and repair work performed or needed., • Executing repairs under warranty to manufacturer specifications., • Maintain a clean and orderly work area following prescribed safety regulations. Requirements • Strong automotive background, • Strong skills in teamwork and communication, • Valid driver’s license free from major infractions, • Attention to detail and the ability to see tasks through, • Prompt and courteous Benefits What We Offer At Karl Malone, everyone is essential, customers and employees. With value placed upon each individual, you will enjoy a family-center environment that goes beyond the competitive pay. Here, you will find a place where your voice matters. We strive to listen to all customers and employees in hopes of gaining new ideas and different perspectives. With the team at Karl Malone, you can build a successful career with paid training and great opportunities for advancement in a rapidly growing company. Just a few of the benefits we have to offer are: • Medical, Dental, and Vision Insurance, • Company-Sponsored Counseling Services, • Paid Vacation, • Paid Training Program, • 401K Savings Plan, • Basic Life Insurance, • Christmas Bonus, • Opportunities for advancement through internal promotion, • Inclusive Family-centered environment for customers and employees, • Sundays off! We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Summary Entry level position. Work within Main Warehouse to provide Outreach support related to equipment provided to Field Trainers and customers. Assist with overseeing and maintaining Quality Control processes to ensure equipment from our Vendor(s) meet expected functionality and performance; acceptable to distribute to our Outreach and customers. Communicate, as necessary, with Engineering Team at Sorenson Headquarters related to hardware and software of Sorenson videophones and products. Communicate, as necessary, with Vendor of our products. Work closely with Main Warehouse Shipping Team. Essential Duties and Responsibilities • Assist testing all incoming new product in Main Warehouse pertaining to Videophones and any Sorenson supported equipment i.e. remote control, videophone flasher, etc., • Ensure equipment received from vendor meets expected functionality and performance by way of Quality Control testing procedures set in place., • Communicate, as necessary, with Sorenson Engineering Team related to hardware and software of Sorenson videophones., • Work closely with Main Warehouse Shipping Team, communicating equipment needs and expectancy., • Hand off equipment from Quality Control to Shipping Team once all testing and checks are met and completed., • Processing field equipment returns by way of sorting, testing, and refurbishment of defective Videophones., • Assist with coordination of RMAs with vendor for repair of defective equipment under warranty and out-of-warranty., • Keep understanding of the needs and demands of certain equipment and how it pertains to Engineering, Shipping Team, Forecasting and management of current/projected inventory levels., • Maintain all records pertaining to Quality Control in respective database(s)., • All other duties assigned by Quality Assurance Supervisor as needed. Knowledge/Skills/Abilities Required • Working knowledge of basic computer functions., • Must multitask well and be proactive., • Good people skills, be able to work in a team environment., • Must be able to follow directions and orders in all assignments given and keep on task., • Understanding that all database information is confidential., • Be able to lift an object weighing up to 50 lbs., • Be able to stand for long periods of time., • Knowledge of American Sign Language is preferred but not required. Experience/Education/Certifications • Experience working with Excel & Word documents., • Experience working in Quality Control, at least 2 years is preferred but not required., • OSHA Forklift Certified. Other General Requirements/Additional Notes • Entry level position., • Positive attitude, team player, good interpersonal communication skills and able to work across company departments., • This position has access to highly confidential, sensitive information relating to the employees, customers, and technologies of Sorenson Communications. It is essential that applicant possess the requisite integrity to maintain the information in strictest confidence. Company Summary Our Mission…Harnessing the power of language, we connect diverse people and enrich the human experience. Our Vision…To provide global language services that expand opportunities, nurture belonging, and empower the world to connect beyond words. As one of the world’s leading language services providers, Sorenson combines patented technology with human-centric solutions. We strive to increase diversity, equity, inclusion, and accessibility for underrepresented people through communication solutions for all: call captioning and video relay services, over-video and in-person sign language and spoken language interpreting, translation, real-time captioning, and post-production language services. Sorenson’s impact vision and plan extends to supporting employment opportunities for diverse employees, customers, and communities. As a minority-owned company, we are committed to expanding opportunities for underserved communities while promoting an inclusive workplace for our own employees. Equal Employment Opportunity: Sorenson Communications is an Equal Opportunity, Affirmative Action Employer.

Job Description Automotive A-Level Technician – Heavy Diagnostics Sandy, UT Monday–Friday $40–$58/hr Hybrid Pay Earning Potential: $80,000–$120,000+ annually About the Role We're looking for a true A-Level Diagnostic Technician who thrives on solving complex electrical and drivability issues—not just replacing parts. This is a high-level diagnostic role focused on heavy electrical and advanced troubleshooting. If you're an avid scope user, strong in OE tools, and enjoy deep diagnostic work, this is the opportunity to elevate your career. What You'll Be Doing * Heavy diagnostics and advanced electrical troubleshooting * Minimal parts changing – strong focus on accurate diagnosis * Using OE scan tools and advanced diagnostic equipment * Utilizing Tekmetric to build and document jobs * Researching complex vehicle issues and repair strategies * Working with modern vehicle systems, including EVs (plus) What We're Looking For * 6+ years of automotive experience * 5+ years of diagnostic experience * Strong heavy electrical diagnostic skills * Proficient with lab scopes (avid scope user preferred) * Experience with OE diagnostic scan tools * EV diagnostic experience is a plus * Strong research and problem-solving skills * Valid driver's license Compensation & Pay Structure * Hybrid pay scale * $40–$58 per hour * Annual earning potential: $80K–$120K+ * Quarterly incentives Benefits & Perks * Monday–Friday schedule (Work/Life Balance) * Health, Dental & Vision Insurance * HSA Plan * Paid Holidays * PTO * Ongoing training & quarterly in-house training * ASE reimbursement * Tool incentives * Lunch & Learns * Team outings * Annual Christmas party If you're a high-level diagnostic technician looking for a shop that values your expertise and rewards your skill set, we'd love to connect.

Job Description Salt Lake Valley Chevrolet in West Valley is looking for a Used Vehicle Reconditioning Service Technician to join our team! We are searching for a highly motivated, detail oriented, service tech with their own tools that may have spent time in aftermarket shops or dealerships working with used car departments. Are you looking for a new opportunity and chance to grow your career while enjoying a work-life balance? Tired of not being appreciated for your unique skill set? We provide a great work and learning environment for Technicians with continuing education, hands-on training, and strong apprenticeship mentoring program. Technician Specific Benefits • Productivity Bonus, • Warranty rate differential, • Higher than industry and local standard pay, • Shop equipped with the newest technology, • Uniforms provided, • Highly productive shop, • ASE and state inspection certification reimbursement and all training expenses paid to further your career, • Continued education, manufacturer hands on and web-based training, • Health, Medical and Dental, • 401(K) Plan, • Paid time off and vacation, • Growth opportunities, • Employee vehicle purchase plans, • Family owned and operated, • Long term job security, • Perform work specified on the repair order with efficiency and in accordance with dealership., • Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment., • Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical, steering, suspension, brakes, air conditioning, etc., • Communicate directly with the Service and Sales managers on vehicle service needs., • Provide estimates of parts and time needed for repairs., • Service shop experience required, • Multiple Make and Model experience preferred but not required, • High school diploma or equivalent, • Dexterity, requiring a steady hand, excellent hand-eye coordination, • Mechanical and troubleshooting skills, • Excellent communication skills, • Basic computer competencies, • Positive, friendly attitude, along with a customer service mentality, • Enjoy working in a fast-paced environment, • Team player with ability to collaborate with others effectively, • Ability to learn new technology, repair and service procedures and specifications, • Able to operate electronic diagnostic equipment, • Valid driver's license and clean driving record

Job Description WE ARE LOCATED IN BILLINGS, MONTANA Are you a precision-oriented professional who sees the "big picture" within the fine print? Precision Plumbing is looking for a Commercial Construction Estimator to serve as the backbone of our project lifecycle. At Precision, we don’t just bid on jobs; we build the infrastructure of our community. If you are looking for a role where your financial insights and technical expertise directly drive company success, let's talk. The Role: As our Commercial Estimator, you will be the strategic link between blueprints and reality. You won't just be crunching numbers; you'll be navigating market conditions, visiting job sites, and building the vendor relationships that make our bids the most competitive in the region. What You’ll Do: • Analyze & Forecast: Dive deep into blueprints, specs, and project docs to build comprehensive cost profiles for labor, materials, and equipment., • Strategic Bidding: Ensure every bid is both competitive and profitable, aligning with project budgets and company goals., • Vendor Management: Negotiate and manage supplier quotes to secure the best value without compromising quality., • Field Collaboration: Conduct on-site visits and work hand-in-hand with Project Managers to refine estimates as projects evolve., • Experience: Proven track record in commercial construction estimating (plumbing or mechanical experience is a major plus!)., • Technical Proficiency: Ability to read complex blueprints and utilize estimating software with high accuracy., • Analytical Mindset: You enjoy the "puzzle" of forecasting and have a sharp eye for detail that others miss., • Stability: Work for a reputable, established company with a consistent pipeline of high-profile commercial projects.

Job Description We are seeking a motivated Architectural Sheet Metal Fabricator to join our growing metal shop. This position focuses on precision fabrication for roofing, wall panels, waterproofing, and custom architectural metal work. Key Responsibilities • Read and accurately use a tape measure, • Perform basic to intermediate math, including fractions, angles, and measurements, • Fabricate architectural sheet metal components per drawings and layouts, • Operate sheet metal equipment (shears, brakes, folders, roll-forming equipment, etc.), • Safely operate a forklift (certification a plus; training available), • Learn, identify, and handle various sheet metal materials (steel, aluminum, copper, zinc, etc.), • Maintain a clean, organized, and safe work environment, • Work closely with shop and field crews to meet project deadlines Qualifications • Strong understanding of measurements, math, and angles, • Ability to read shop drawings or simple fabrication sketches, • Mechanical aptitude and attention to detail, • Willingness to learn new equipment and fabrication techniques, • Forklift experience preferred

Job DescriptionWe are looking for a Diesel Mechanic to join our Snow Country team! You will be responsible for our fleet of mid-size buses, up to full-size motor coaches. Engine types include Ford gas power, Cummis, Detroit, and Powerstroke. Must have 2+ years minimum experience. A more experienced mechanic will be considered first. Pay is based on experience. We are a growing company with opportunities for growth! Responsibilities: • Repair buses, • Perform routine vehicle maintenance, • Use diagnostic tools to test vehicle components, • Perform quality inspections prior to returning the vehicle to service Qualifications: • Previous experience as a mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environment Job Requirements: • 2 years of experience, • Basic set of tools Snow Country offers equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Snow Country complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Job Type: Full-time • Pay: $28.00 - $45.00 per hour, • PTO, • Vision, dental, health and life insurance Experience level: • 2 years Schedule: • Monday to Friday, • Weekends on call as needed Experience: • Mechanic: 2 years (Required) Willingness to travel • (Required) Work Location: In person

Job Description POSITION DESCRIPTION Job Title: Concrete Finisher/ Labor Location: Salt Lake City, Utah General Purpose of Position: Constructs forms for concrete structures. Smoothes and finishes surfaces of poured concrete floors, walls, sidewalks or curbs to specified textures, using hand tools or power tools, including floats, trowels and screeds. General Job Duties: Formsetter: 1. Studies blueprints and diagrams to determine type and dimension of forms to be constructed., 2. Saws lumber to blueprint dimensions, using handsaw or power saw and nails lumber together to make form panels., 3. Erects built-in-place forms or assembles and installs prefabricated forms on construction site according to blueprint specifications, using hand tools, plumb rule and level., 4. May direct crane in placement of forms and guides forms into exact position., 5. Inserts spreaders and tie rods between opposite faces of forms using pry bar to maintain specified dimensions. Performing other duties as assigned. Position Requirements: 1. Minimum Education and Experience: must have working knowledge of grades, screeding, floating, finishing concrete slabs, curbs, etc. 2 years experience preferred, but willing to train the right candidate., 2. Tools, Equipment, or Machines Required to Operate: must own personal hand tools. Must be able to operate power saws and other powered equipment. Judgment/Decision Making: occasional. Supervision: 1. Position Receives Direction From: Superintendent and foreman. Other supervision may be received., 2. Position Directs: N/A. ALL EMPLOYMENT IS AT-WILL, MEANING THAT EITHER THE EMPLOYEE OR EMPLOYER MAY TERMINATE THE EMPLOYMENT RELATIONSHIP AT ANYTIME WITH OR WITHOUT CAUSE OR PRIOR NOTICE.

Job Description American Transportation Services has an immediate opening for qualified trailer/tractor technician. Qualified candidates must be a self-starter with the ability to work remotely with little to no supervision. We provide a friendly & stable work environment primarily focused on day shift hours M-F. Selected candidates will be responsible for maintaining trailering equipment as well as performing minor external repairs on yard spotting equipment (switchers) for a Fortune 500 package delivery company. We offer competitive wages, flexible hours, as well as the following fringe benefits: · Health insurance · Dental insurance · Vision insurance · 401K Retirement with company match · Incentive based bonus program with each pay cycle. · Paid vacation. · Paid Holidays (upon completion 90 days of employment) · Flexible schedule · Training programs · Opportunity to promote within Requirements JOB REQUIREMENTS: Qualified Tech 1-3 years as a mechanic, ability to diagnosis and repair switchers, trailers, and converter dollies. Must be qualified to perform state and federal inspections. Experience in: trailer/mechanic (similar) a plus Responsibilities Include but not limited to: · Perform FAI and State required inspections. · Inspect and repair “S” cam air brake systems. · Diagnose and repair anti-lock brake systems. · Perform repairs to commercial trailers and converter dollies in all potential aspects. · Familiar with Cummins Insight · Diverse diagnostic skills . Roll-up Door experience . Minor body work experience · AC experience a plus Company DescriptionAmerican Transportation Services | Experts at Onsite Maintenance Custom Trailer maintenance and shop solutions for the transportation industry.American Transportation Services | Experts at Onsite Maintenance\r\nCustom Trailer maintenance and shop solutions for the transportation industry.

Job Description We are seeking an individual motivated to work in a quality-driven manufacturing environment to join our team! This person will learn many different operations in the fabrication of precision sheet metal housings and/or enclosures. We train and provide opportunities to move up to different positions of responsibility. This is an entry-level position with opportunities to move up. We will work with you around a school schedule, if needed! Requirements • Demonstrate a punctual track record, • Ability to communicate well with others, • A "can do" attitude, • Willing to adapt to continual improvements of processesCompany DescriptionJedcor is a precision sheet metal fabrication company and has been in business for almost 45 years. Our products are built for a diverse range of industries both locally and around the world. In the broadcast industry, we build housings for computer and electronic equipment and have such housings in most major broadcast companies throughout the world. We focus on the complete solution to our clients needs resulting in innovative solutions with unparalleled quality. Our quality is demonstrated through our quality management system, certified as ISO9001 for seven consecutive years and AS9100 for three. We are always looking for individuals to who don't just want a job but a career where opportunities for growth and development are a part of our culture. We seek individuals who bring their unique professional experiences and can effectively mold them into our thriving culture. Our benefits include health, dental, and 401k. We are a drug-free environment and participate in e-verify. If you feel you would thrive in this type of environment, we would welcome an opportunity to meet with you.Jedcor is a precision sheet metal fabrication company and has been in business for almost 45 years. Our products are built for a diverse range of industries both locally and around the world. In the broadcast industry, we build housings for computer and electronic equipment and have such housings in most major broadcast companies throughout the world. \r\n\r\nWe focus on the complete solution to our clients needs resulting in innovative solutions with unparalleled quality. Our quality is demonstrated through our quality management system, certified as ISO9001 for seven consecutive years and AS9100 for three. \r\n\r\nWe are always looking for individuals to who don't just want a job but a career where opportunities for growth and development are a part of our culture. We seek individuals who bring their unique professional experiences and can effectively mold them into our thriving culture. Our benefits include health, dental, and 401k. We are a drug-free environment and participate in e-verify. If you feel you would thrive in this type of environment, we would welcome an opportunity to meet with you.

Job Description Automotive Technician Job Description AAMCO Transmissions is the world’s leader in transmissions and complex automotive repairs. We are expanding at a rapid rate and looking for the best of the best in the industry. We are actively seeking B Level Technicians in the areas of Transmission R&R, General Automotive Repair and Diagnostics. As an AAMCO Transmission employee we invest heavily in the growth of knowledge of our employees including ongoing training, investment in advanced equipment for servicing vehicles and much more. If you feel you’re ready for a new challenge, ready to grow your career with a nationwide industry leader then reach out to us now. Position Responsibilities: • Inspect, diagnose and repair vehicle automotive systems, • Assist other technicians in performing technical activities, • Perform general repairs on vehicles, • Continuously learn new technical information, equipment, tools and repair techniques, • Professionally record findings so that repairs costs are accurately estimatedWhat We Offer:, • Hourly rate based on experience, • Daytime work hours, • Access to AAMCO’s proprietary training programs, seminars and skill presentations, • Live technician support hotline capable of troubleshooting any problem encountered in your center, • An AAMCO Career Path, a formal plan, designed to take you anywhere in the Automotive Industry. We offer a Career not just a Job., • Clean, safe environment, • Great team atmosphereJob Requirements:, • Minimum of 3+ years’ experience working as an Automotive Technician, • Hold a valid driver’s license, • Own professional grade tools to service any general repair need, • Experience troubleshooting and conducting both mechanical and electrical diagnostics, including drivability testing 30tkqspJ0m

Job Description We are adding Experienced Service Technicians to our teams at Salt Lake Valley Chevrolet and Salt Lake Valley Buick GMC in Salt Lake City Utah! If you are currently a technician not earning what you are worth contact us now! Are you looking for a new opportunity and chance to grow your career while enjoying a work-life balance? Tired of not being appreciated for your unique skillset? We provide a great work and learning environment for Technicians with continuing education, hands-on training, and strong apprenticeship mentoring program. For a confidential and no obligation conversation to see what we can offer please email: Current Available Positions: Technician Apprentice (Must have tools and some automotive repair experience). Experienced Service Technician Heavy Line Technician Transmission Technician Master Service Technician Technician Specific Benefits • Productivity Bonus, • Warranty rate differential, • Higher than industry and local standard pay, • Shop equipped with the newest technology, • Uniforms provided, • Highly productive shop, • ASE and state inspection certification reimbursement and all training expenses paid to further your career, • Continued education, manufacturer hands on and web-based training, • Health, Medical and Dental, • 401(K) Plan, • Paid time off and vacation, • Growth opportunities, • Employee vehicle purchase plans, • Family owned and operated, • Long term job security, • Perform work specified on the repair order with efficiency and in accordance with dealership., • Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment., • Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical, steering, suspension, brakes, air conditioning, etc., • Communicate directly with the Service Advisor so that customers are informed if any additional service is needed. Provide an estimate of time needed for additional repairs., • Some Service shop experience required, • Dealership experience preferred but not required, • High school diploma or equivalent, • Dexterity, requiring a steady hand, excellent hand-eye coordination, • Mechanical and troubleshooting skills, • Excellent customer service skills, • Basic computer competencies, • Positive, friendly attitude, along with a customer service mentality, • Enjoy working in a fast-paced environment, • Team player with ability to collaborate with others effectively, • Ability to learn new technology, repair and service procedures and specifications, • Able to operate electronic diagnostic equipment, • Valid driver's license and clean driving record

Job Description We're Hiring: Energy Auditor/Quality Control Inspector | $28.66/hour + Amazing Benefits! Location: 850 W. 1700 S. Suite #1, SLC, UT 84104 | Schedule: Monday- Friday 7:30 am – 4:00 pm| Type: Full-Time | FLSA: Non-Exempt Are you ready to make a real impact on your community while working in a hands-on, dynamic environment? Utah Community Action is looking for a Certified Residential Energy Auditor / Quality Inspector to join our team! In this role, you'll perform energy audits on low-income households, conduct quality inspections, and guide energy retrofit installations that help families save money and live more comfortably. What You'll Do & What You Bring • Perform certified residential energy audits using diagnostic testing equipment., • Inspect completed projects for quality, safety, and compliance with state, federal, and agency standards., • Prepare detailed work orders for crews to install recommended energy-saving measures., • Coordinate with code enforcement and community professionals to conduct inspections and facilitate project closeouts., • Maintain and properly use agency vehicles, tools, and equipment., • Document and verify that all work and client files are complete and accurate., • Apply expertise in energy efficiency, construction, and residential building systems., • Communicate effectively in English, both written and verbal., • Demonstrate strong attention to detail, organizational skills, and time management., • Exercise sound judgment, discretion, and problem-solving skills., • Work independently and collaboratively in a positive, productive team environment., • Comfortably work with diverse populations and community professionals., • Use computers, spreadsheets, and work order software efficiently. Minimum Requirements • High school diploma or GED (or equivalent combination of experience and education)., • 1 year of related experience., • Certifications: BPI Quality Control Inspector, Energy Auditor certification, lead inspector, OSHA-10, and Rocky Mountain Gas Association (RMGA). Must be obtained within 9 months if not currently held., • Bachelor's degree in a related field. A valid, unrestricted driver's license must be maintained, and the individual must remain eligible for vehicle insurance coverage. Travel may include using personal or agency vehicles for program-related transportation. Work Environment & Physical Demands This position combines office-based work with frequent client home visits. The role requires: • Frequent standing, walking, kneeling, bending, twisting, squatting, climbing, crawling, reaching, driving, and pushing/pulling., • Lifting and carrying 50+ pounds. Pay & Perks • $28.66/hourly, • Medical, Dental, and Vision Insurance, • HSA with up to $2,500 match + Telehealth access, • 401(k) with 5% company match, • 11 Paid Holidays + Paid Winter Break (Christmas-New Year's), • 192 PTO hours annually + Weekly Paid Self-Care Hour We serve over 60,000 individuals annually through programs like Head Start, Nutrition, Housing, HEAT, Weatherization, and more. Apply now! It only takes 3 minutes to join a team that's changing lives every day. Utah Community Action is an Equal Opportunity Employer and the agency prohibits discrimination and harassment because of a person's protected status such as race, color, national origin, religion, age (40 and over), physical or mental disability, genetic information, veteran, military service, gender, sex (including conditions of pregnancy), marital status, familial status, sexual orientation, gender identity or any other protected- group status. Job Posted by ApplicantPro

Job Description Urgently hiring Precision Tune Auto Care is hiring experienced automotive technicians who want a busy shop. What are you looking for? Flexible hours? Being paid for the work you do? Tons of cars and a lot of productive time? Excellent benefits, including medical with Blue Cross? Family-owned business? We can offer all of these things, and we want to talk to you! Our business is growing, the opportunity is huge, and we will pay very competitive hourly rates. Precision Tune Auto Care is proud to offer: • Top industry pay - Competitive hourly wage based upon experience, • High car count and plenty of productive time available, • Medical and dental insurance, • Paid time off Our company strives to provide outstanding customer service and high-quality work at a great value. We are seeking enthusiastic, passionate team members who want to build a career with a growing company. Automotive technician duties include diagnosing and performing repairs on all vehicle components (e.g. brakes, emissions/exhaust, A/C, suspension, electrical, etc). You will also need to be able to explain mechanical diagnoses and needed repairs to non-mechanical individuals, which may include teammates and customers. In addition, we want you to continuously improve your technical knowledge. Qualifications include: • General Service Tech - Minimum of 1 year of automotive technician/repair experience, • Must have valid driver’s license, • Ability to multi-task in fast-paced environment, delivering quality work, • Ability to work a flexible 5-day schedule including Saturdays, • High school degree or GED equivalent preferred, • Be able to pass background check Job Type: Full-time Schedule: • 10 hour shift, • 8 hour shift, • Day shift, • Overtime

Job Description Are you an experienced auto technician looking to join a team with a great culture? Look no further than Twin City Auto in Scottsbluff NE! We are currently seeking a skilled and dedicated individual to join our team of automotive professionals. About Us At Twin City Auto, we pride ourselves on providing top-quality automotive services to our customers in Scottsbluff NE and the surrounding areas. With a focus on honesty, integrity, and exceptional customer service, we have built a reputation as a trusted auto care center in the community. Our team of experienced technicians is committed to delivering high-quality workmanship and providing our customers with the best possible service. We believe in creating a great culture where our employees can thrive and grow professionally. With a strong focus on teamwork and collaboration, we strive to create a positive and supportive work environment for all of our employees. Here at Twin City Auto, we believe in rewarding hard work and dedication, and we are committed to helping our employees reach their full potential. If you are passionate about cars and have the skills and experience to excel in a fast-paced automotive environment, we want to hear from you. Join us at Twin City Auto and be a part of our great culture! #hc148292

Job Description For more information or to apply in person, please contact the Branch: HireQuest Direct 838 W N Temple, Suite C Salt Lake City, UT 84116 Phone: 801-521-9675 Job Description: Framers, Finish Carpenters, concrete finishers, installers, licensed plumbers, electricians, heavy equipment operators

Job DescriptionPosition Overview Are you outgoing and customer-focused? Do you enjoy working with the public? If you answered yes to these questions, working for a State Farm independent contractor agent may be the career for you! State Farm agents market only State Farm insurance and financial service products. Responsibilities • Establish customer relationships and follow up with customers, as needed., • Use a customer-focused, needs-based review process to educate customers about insurance options., • Develop leads, schedule appointments, identify customer needs, and market appropriate products and services.As an Agent Team Member, you will receive..., • Simple IRA, • Hourly pay plus commission/bonus, • Health benefits, • Paid time off (vacation and personal/sick days), • Flexible hours, • Growth potential/Opportunity for advancement within my agency, • Hiring Bonus up to $Requirements, • Interest in marketing products and services based on customer needs, • Excellent communication skills - written, verbal and listening, • People-oriented, • Detail oriented, • Proactive in problem solving, • Able to learn computer functions, • Ability to work in a team environment, • Property and Casualty license (must be able to obtain), • Life and Health license (must be able to obtain)If you are motivated to succeed and can see yourself in this role, please complete our application. We will follow up with you on the next steps in the interview process. This position is with a State Farm independent contractor agent, not with State Farm Insurance Companies. Employees of State Farm agents must be able to successfully complete any applicable licensing requirements and training programs. State Farm agents are independent contractors who hire their own employees. State Farm agents employees are not employees of State Farm.

Job Description Urgently hiring Precision Tune Auto Care is hiring experienced automotive technicians who want a busy shop. What are you looking for? Flexible hours? Being paid for the work you do? Tons of cars and a lot of productive time? Excellent benefits, including medical with Blue Cross? Family-owned business? We can offer all of these things, and we want to talk to you! Our business is growing, the opportunity is huge, and we will pay very competitive hourly rates. Precision Tune Auto Care is proud to offer: • Top industry pay - Competitive hourly wage based upon experience, • High car count and plenty of productive time available, • Medical and dental insurance, • Paid time off Our company strives to provide outstanding customer service and high-quality work at a great value. We are seeking enthusiastic, passionate team members who want to build a career with a growing company. Automotive technician duties include diagnosing and performing repairs on all vehicle components (e.g. brakes, emissions/exhaust, A/C, suspension, electrical, etc). You will also need to be able to explain mechanical diagnoses and needed repairs to non-mechanical individuals, which may include teammates and customers. In addition, we want you to continuously improve your technical knowledge. Qualifications include: • General Service Tech - Minimum of 1 year of automotive technician/repair experience, • Must have valid driver’s license, • Ability to multi-task in fast-paced environment, delivering quality work, • Ability to work a flexible 5-day schedule including Saturdays, • High school degree or GED equivalent preferred, • Be able to pass background check Job Type: Full-time Experience: Schedule: • 10 hour shift, • 8 hour shift, • Day shift, • Overtime

Job Description Build Your Future With CMT At CMT Technical Services (CMT), we're building more than just infrastructure-we're building communities, careers, and a culture rooted in integrity, collaboration, and technical excellence. As a trusted leader in materials testing, inspection, and engineering services, we help ensure the safety and strength of everything from highways and bridges to commercial buildings and energy projects. With a dynamic team of professionals across multiple regions, CMT empowers individuals to grow, innovate, and make a tangible impact on the world around them. Join us-and be part of something built to last. We are seeking ICC Certified Special Inspectors and Certified Welding Inspectors (CWI) to join our team in Utah. This role is responsible for performing structural inspections on concrete, masonry, steel, and welding projects. The ideal candidate will have a strong working knowledge of applicable codes, exceptional documentation skills, and a commitment to safety and precision. Compensation: $28-32/hour depending on experience Location: West Valley City, Utah FLSA Exemption: Non-Exempt Schedule: Hours may vary What you'll be doing: * Conduct inspections for structural concrete, masonry, steel, and welding in accordance with project specifications and relevant codes * Read and interpret plans and specifications for the elements being inspected * Communicate findings clearly and in a timely manner with Project Managers, Contractors, Structural Engineers, and Technicians * Maintain accurate records, reports, datasheets, and timecards * Perform soil density and concrete testing as needed * Ensure compliance with acceptance and rejection criteria for construction elements * Maintain truck and equipment per company policy * Uphold a professional appearance and client-focused attitude on-site * Climb ladders, scaffolding, and platforms (up to 100') as required for inspection access * Minimize client complaints through accuracy and responsiveness What you have: * High school diploma or equivalent * Ability to understand and perform written instructions, procedures, and calculations * Physical ability to lift (up to 100 lbs), climb, crouch, twist, and perform other strenuous field tasks * Strong communication and report-writing skills * At least one recommendation from a Project Manager (three preferred) * In-depth understanding of materials, construction methods, and inspection/testing procedures * Valid driver's license What will make you stand out: * Recommendations from three Project Managers * Extensive experience in multiple areas of inspection (e.g., concrete, masonry, steel, fireproofing) * High-level leadership and field judgment * Ultrasonic Testing (UT) capabilities * Consistent record of <1% client complaint rate Preferred Certification(s): * ICC Special Inspector Certifications in one or more of the following: * Structural Masonry * Reinforced Concrete * Structural Steel and Bolting * Spray-Applied Fireproofing * CWI – Certified Welding Inspector (AWS) * UT Certification for steel inspections (preferred) * ACI Concrete Field Testing Technician – Grade I * NICET – Construction Materials Testing (Soils/Concrete preferred) * FAA Part 107 Drone License (optional, useful for aerial documentation) CMT Technical Services is an Equal Opportunity Employer. All qualified applicants will be considered for employment without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local laws. We are committed to maintaining a professional workplace where individuals are treated with respect and fairness. Job Posted by ApplicantPro

Job Description Certerra is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, Certerra has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. This Opportunity: We have immediate full-time career opportunities for ICC Special Inspectors in our Salt Lake City, UT office. Certerra offers on-going training and the ability to gain valuable career experience and technical certifications. The ideal candidate will have experience performing construction testing and inspection of soil, concrete, masonry, structural steel and/or spray-applied fireproofing. Essential Functions • On site observations/inspections to confirm compliance with local building codes and project contract documents, • Collecting samples, • Performing specific QA/QC tests on construction materials and building components per ASTM, ACI, etc. standards Desired Qualifications, Experience, and Education: • ICC certifications in at least one of the following areas – Soils, Structural Concrete, Post-Tension/ Reinforced Concrete, Masonry, Fireproofing, • ACI Field Grade 1/ NAQTC, • 2+ years’ experience performing multi-discipline special inspections & tests, • The ability to read and comprehend plans & specifications, • Excellent communication skills (both oral and written), • Valid State driver’s license with clean driving record We offer an excellent benefits package for full-time employees which includes medical, dental, vision, paid holidays, paid-time off, 401k, and more. We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

Job DescriptionSalary: The Heavy Equipment Field Mechanic is a pivotal role, responsible for diagnosing, troubleshooting, and executing mechanical, electrical, hydraulic, and pneumatic repairs on various heavy equipment in the field. This role demands proficiency in operating industry-specific machinery while ensuring all assigned tasks are completed accurately and within specified timelines. Whitaker Construction,founded in 1953, has over 70 years of experience in the heavy civil and underground utility construction industry. Whitaker, an ESOP (Employee Stock Ownership Plan) company, has become one of the largest contractors in the intermountain area with more than 600 employees and nearly 70 crews. We perform sanitary sewer, storm drain, culinary water, irrigation, earthwork, roadway construction, dams, landfills, natural gas pipelines, industrial piping, and telecommunication projects primarily in Utah, Idaho, Nevada, Wyoming, Colorado, and Oregon. Key Responsibilities: • Diagnose and troubleshoot mechanical issues in heavy equipment., • Maintain and rebuild diverse construction machinery., • Dismantle and reassemble equipment using specialized tools., • Assess parts for wear and damage., • Repair or replace major components within engines, transmissions, steering, etc., • Conduct repairs within cooling, braking, steering, electrical, and hydraulic systems., • Test overhauled equipment to ensure optimal functionality., • Utilize welding, brazing, and fabricating techniques for equipment modification or repair., • Document work orders, warranty information, and maintain accurate time sheets., • Continuously learn and improve technical skills through training sessions. Qualifications and Skills: • High School Diploma or GED; vocational training preferred., • Minimum 5 years' experience as a heavy equipment mechanic or equivalent., • Class A or Class B CDL and valid Medical Card per DOT standards are required., • Ability to manage personal tools and parts inventory., • Proficiency in safely operating and diagnosing various equipment., • Strong comprehension of technical manuals, schematics, and drawings., • Detail-oriented with excellent communication skills., • Proficiency in Microsoft products, smartphones, and iPads., • Proficiency in Web based parts catalogs and ordering, • Eagerness to learn and a strong sense of responsibility., • Ability to work independently with minimal supervision., • Team player and Safety cutler minded in daily work activities, • Proficient in operation and application of mobile mechanic truck crane, • Familiar with work practices in rigging application with mechanic truck operations. Physical Requirements: • Flexibility to work extended hours, including nights and weekends as needed., • Physical capability to perform tasks such as lifting, reaching, stooping, balancing, climbing, kneeling, and lifting up to 60 pounds., • Adaptability to outdoor work environments, weather changes, noise, vibrations, and job-related hazards., • Willingness to engage in strenuous physical labor. Benefits and Perks: • Employee Stock Ownership Plan (ESOP) offering ownership in the company., • Competitive wages., • Health, Dental, Vision, Life, Short Term Disability, and Supplemental Insurance., • 401 K with matching contributions., • Generous vacation, paid holidays, and personal days., • Quarterly Incentive Program (profit sharing)., • Referral bonuses., • Employee Assistance Program (EAP). Reasonable Accommodation Statement The ADA defines reasonable accommodation as a change or adjustment to a job or work environment that allows a qualified individual with a disability to satisfactorily perform the essential functions of a particular job, and does not cause an undue hardship for the employer. Whitaker Construction is an equal opportunity employer. Whitaker will not discriminate and will take affirmative action measures to ensure against discrimination in employment, recruitment, advertisements for employment, compensation, termination, upgrading, promotions, and other conditions of employment against any employee or job applicant on the bases of race, creed, color, national origin, or sex. Women and minorities are encouraged to apply.

Job DescriptionBenefits: • Hiring bonus, • Bonus based on performance, • Competitive salary, • Flexible schedule, • Health insurance, • Opportunity for advancement, • Paid time off Grow your career as you better your community. As an attentive, sociable, and sales-minded professional, we are eager to have you on our team. RESPONSIBILITIES: • Develop and maintain customer relationships to drive retention and growth., • Conduct policy reviews and provide recommendations to customers., • Oversee the resolution of complex customer issues., • Use your knowledge of our insurance products to recommend, explain and sell policies to both cold and warm leads.QUALIFICATIONS:, • Experience in insurance sales or account management preferred., • Leadership and interpersonal skills., • Proven track record of meeting sales targets., • Willingness to engage in sales conversations.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Flexible schedule, • Opportunity for advancement, • Paid time off Grow your career as you better your community. As an attentive, sociable, and sales-minded professional, we are eager to have you on our team. RESPONSIBILITIES: • Develop and maintain customer relationships to drive retention and growth., • Conduct policy reviews and provide recommendations to customers., • Oversee the resolution of complex customer issues., • Use your knowledge of our insurance products to recommend, explain and sell policies to both cold and warm leads.QUALIFICATIONS:, • Experience in insurance sales or account management preferred., • Leadership and interpersonal skills., • Proven track record of meeting sales targets., • Willingness to engage in sales conversations.

Job Description Federal Construction Professionals – QCM, Superintendent, SSHO, PM, Estimator, Scheduler Apply Below! Elite Recruiting and Consulting Services, SDVOSB, is building an ongoing pipeline of experienced Federal construction professionals for upcoming NAVFAC, USACE, and Guard projects nationwide. If you have worked on military bases or federal vertical or horizontal projects, we want to connect. We support primes preparing for new phases, new awards, and upcoming mobilizations. Roles We Are Sourcing Quality Control Manager Construction Superintendent SSHO, Site Safety Officer Project Manager Estimator Scheduler Federal skilled trades Types of Projects Access control facilities Barracks and housing Aircraft hangars HVAC and MEP upgrades Ranges and training facilities Renovations on Air Force, Army, Marine Corps, and Guard installations What Helps You Stand Out NAVFAC or USACE project experience CQM certification EM 385 1 1 OSHA 30 Secret or Top-Secret clearance Ability to travel Strong documentation and coordination skills How to Apply Complete our Federal Construction Candidate Form below for fastest review We will reach out as soon as your experience matches an upcoming federal project. Veterans are encouraged to apply.

Job DescriptionBenefits: • Simple IRA, • License reimbursement, • Bonus based on performance, • Competitive salary, • Flexible schedule, • Health insurance, • Opportunity for advancement, • Paid time off Grow your career as you better your community. As an attentive, sociable, and sales-minded professional, we are eager to have you on our team. RESPONSIBILITIES: • Provide information about insurance products and services., • Assist customers with policy applications and renewals., • Handle customer inquiries and provide timely responses., • Maintain accurate records of customer interactions.QUALIFICATIONS:, • Communication and interpersonal skills., • Detail-oriented and able to multitask., • Experience in customer service or sales preferred.

Job DescriptionSalary: Malcolm Drilling is actively looking for a qualified Estimator/Project Manager of Dewatering for projects in Salt Lake City, UT. This essential role requires expertise in directing and coordinating dewatering activities while assuring top-notch project execution. Apply now to join the dynamic team at Malcolm Drilling and take part in progressive projects in Mountain West Region if you have previous experience in dewatering management and are eager to take on new challenges. Company: Malcolm Drilling has been innovating and leading the deep foundation industry for over six decades. As part of ourdeep foundations,retention systems, andground improvementservices, we also provide a range ofspecial applicationsanddewateringtechniques. By implementingDesign/Build, we execute projects quickly and effectively, allowing for timely collaboration with owners and contractors. Through our regional offices, we offer these services nationwide. Job Title:Estimator/Project Manager- Dewatering Location:Salt Lake City, UT Schedule: Full-time Responsibilities: • Project estimating and project management of civil projects with all types of deep foundations, retention systems, ground improvement and dewatering scope., • Perform site visits to evaluate site conditions., • Study drawings, specification and geotechnical reports., • Request and evaluate vendor and subcontractor quotes., • Prepare take-offs, cost estimates, bid proposals and budgets., • Negotiate construction contracts (with help from our legal team)., • Prepare project submittals including construction means and methods, design calculation (design-build), specialty equipment and required materials., • Manage field quality and control cost., • Understand and help implementing required safety measurements., • Prepare project billings and close out project paperwork., • Attend company wide training. Qualifications: • Bachelors degree in civil engineering or construction management., • 5+ years of related experience in civil or geotechnical engineering., • Excellent communication skills, both written and verbal., • Have good mathematical and analytical capabilities., • Basic understanding of our construction methods., • Ability to travel to various job sites within the district., • Meet deadlines for multiple tasks., • Proficient with Word, Excel, Outlook and PowerPoint., • Project management: 2 years (Preferred)., • Drivers license required. Benefits Package: • Competitive Salary., • 100% paid premiums for Dental and Vision plans for the employee and all dependents., • Malcolm covers an average of ninety-five percent of the medical premium for the employee and all dependents., • Malcolm contributes up to 10% of your salary into a retirement plan., • Opportunities for career advancement. Malcolm Drilling Company, Inc. is an Affirmative Action/Equal Opportunity Employer of Minorities, Females, Protected Veterans, Individuals with Disabilities, and a Drug-Free Workplace.

Job Description At Senske Services, we make the neighbors green with envy for our beautiful lawns! Come join a winning team where the grass is always greener on our side, thanks to our Application Techs’ hard work and dedication in transforming customers’ outdoor spaces. Our Application Technicians provide service to residential or commercial client properties in a timely, safe manner, using hand and powered equipment to apply products to treat our customers' lawns. Every day on the job will bring exciting new challenges as you use your specialized skills to perform soil analysis and control insects, diseases, and unsightly weeds. Application Technicians educate homeowners on proper lawn maintenance, advise on lawn and landscape problems, and determine appropriate solutions for their unique needs. They use expert knowledge to sell/upsell additional services to existing and new customers, resulting in the growth of our clientele. Our Technicians display strong communication skills when providing customers with product / service information and when resolving customer concerns onsite. Experience is great, but we also train people to do what we love. We will teach you everything you need to know to succeed! You will receive guidance and plenty of support from our talented, super-smart colleagues and leadership team. Wage Range: $18.00 - $22.00 per hour. The starting wage is determined based on relevant experience. This is an hourly, non-exempt position. The Perks: • Competitive Hourly Pay - Life is expensive! We believe in paying well., • Your job is safe with us. We are a fast-growing company, which means you will have opportunities to advance your career – we promote from within!, • We recognize and reward great work by offering huge commission incentives (10%-15% depending on the service sold) and other compensation contests (bonuses & gift cards) throughout the year!!, • Do you want to work with your friend? We offer a referral bonus!, • Great Trucks & Equipment, • Paid training from day 1!, • Affordable health care packages that include medical, dental, vision, and life insurance, • Company paid short-term disability and paid life insurance, • 401K with Employer Match, 9 Company Paid Holidays, Paid Vacation (accrue up to 1 week of paid vacation your first year), Paid Sick Leave (accrue up to 1 week of paid sick leave your first year), • Fun team celebrations year-round!, • Dynamic, Outdoor Work Environment, • Possess a valid driver's license and have a history of safe driving, • Ability to pass a pre-employment background screening and drug test (THC excluded)., • At least 21 years old or older (requirement to drive a company vehicle), • Committed to safety and the use of all the proper PPE the job requires, • Friendly and dedicated to great customer service, • Ability to prioritize, multitask, work independently, and as part of a crew, • Ability to work in varying weather conditions, • Possess Strong Problem-Solving Abilities, • Encourage a Positive Team Atmosphere & Willingness to Help Others #INDHP6

Job Description Job Summary Project Managers are Dennis Group’s primary client contact through the entire project delivery process, from design concept through bidding, construction, and start-up. As a Project Manager, your responsibility is to ensure each project’s scope, cost and schedule are successfully met. Our projects are designing and building food and beverage process facilities (industrial projects). The design/architect teams, engineering teams (multiple), and construction teams are housed within Dennis Group and the project manager is actively interacting with each group to ensure the success of the project. Project Manager’s mission is to provide project management and execution expertise for clients through the entire project life cycle. Project Managers also play a vital role in our client relationship management program. As such, having the requisite experience, skill set, and character to successfully support our sales and marketing activities is an essential aspect of the role. This role requires excellent leadership, organization, and time management skills as you will wear many hats at once. Those finding success in the role typically have a technical background - which they apply daily - and are professional, self-motivated, and energetic with excellent communication and inter-personal skills. Typical responsibilities include but not limited to: Responsibilities • Works autonomously on specific tasks, • Managing projects from planning through commissioning including developing key success criteria for each project and ensuring the success criteria are achieved, • Assisting with the development of project scope, budget, schedule, and critical path elements, • Develop RFI, • Prepare purchase/work authorization., • Maintain client SharePoint site, • Managing in-house and consulting design teamwork product, • Establishing design criteria; reviewing design and construction phase documents, • Managing permit, code and regulatory approvals, • Develop preliminary procurement plan (preparation of bid packages, bid tabulation, writing of purchase orders and subcontracts), • Assemble and evaluate potential project bidders, • Define kick-off meeting agenda, • Determine project definition deliverables, • Coordinate all project communication, • Develop project outline specifications, • Develop conceptual layout – understanding of facility personnel and materials flows, critical adjacencies, • Develop medium engineering services proposal, • Manage bid process fairly and professionally and review and approve bid packages, • Maintain “Outstanding Items Needs” list, • Maintain Project Meeting notes, • Develop and implement lessons learned for project, • Develop and issue monthly reports, • Determine project permitting needs, • Update project forecasting tool monthly, • Review and approve engineering deliverables, • Develop preliminary construction cost estimates – site and building, • Define project assumptions / exclusions, • Review and approve monthly supplier invoices and client billing, • Develop and maintain submittal and RFI processes, • Develop preliminary PM/Eng/CM/Start-up support cost estimate, • Facilitate and manage food safety risk assessments, • Organizing construction trades and administering subcontracts, • Managing project budget and expense approvals, • Managing contract and change order administration, • Overseeing equipment installations, • Providing on-site supervision and coordinate design team on-site support activities, • Facilitate project interactive planning sessions, • Refine and update budget forecast, • Finalize procurement plan, • Managing project punch-list inspection, • Assembling and maintaining complete project records and close-out documents, • Facilitate and manage client and 3rd party design reviews, • Interfacing with client, working in client facilities and construction sites., • Utilize multiple software programs (MS Office, CAD, Navisworks, MS Project, SharePoint, etc.), • Researching project management best practices, • Degree in Construction Management / Architecture / Engineering, • 4-7 years of experience within a design-build, General Contractor company working with multiple in-house engineer disciplines, architects, designers, etc., • 4-7 years of experience with MEP industrial construction projects, preferably food and beverage or pharmaceutical projects., • 4-7 years of experience with Building construction, Project scheduling, Construction estimating, and Construction Safety., • 4-7 years as a Project Manager with proven track record of successful project management and demonstrated success delivering numerous projects delivered on time, meeting requirements, with high team satisfaction., • Basic understanding of AutoCAD, Revit, Navisworks, and other design software, • Familiarity with sanitary environments is a plus, • Attention to detail, accuracy and deadlines, • Must meet overnight travel requirement of not less than 50% (overnight travel of 70-120 nights out of town annually) of any given time of the year, • Our projects are located throughout the United States and Canada, and this is a position that you will need to work collaboratively with owners, A/E teams, subs, building officials, etc. regularly at the client’s facilities and construction sites. Overnight travel requirement will be not less than 50% of any given time of the year., • Prolonged periods sitting at a desk and working on a computer., • At times, standing and walking the jobsite over rough terrain can be expected We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job DescriptionSalary: $35.18-$37.35 per hour Service Technician Salt Lake City, UT area Job Summary GETNA Service Technicians provide field service support on complex electro-mechanical systems in more than 26 national locations. They perform installations, training and electro-mechanical preventative and remedial maintenance activities. In addition to technical aptitude, this high visibility, customer-centric position will also provide our customers with consistent, high-level, all-around service and attention. The candidate must be a U.S. Citizen. This is a requirement for this position. All offers of employment are contingent upon ones eligibility to obtain and maintain a government security clearance sponsored by GETNA.Having an ACTIVE SECURITY CLEARANCE is a plus. Security Clearance is not required prior to applying; GETNA will begin the security clearance process once the right candidate is selected. Unfamiliar with the Security Clearance process? No problem! Our Security Team will walk the selected candidate through the process. NOTE: This not a software, IT or Networking based position Key Responsibilities Install, maintain, and support all equipment maintenance efforts, conforming to customer Service Level Agreement (SLA) requirements. Respond promptly to all maintenance calls. Documenting each maintenance action with time, labor, meters, resolution notes and parts used. Maintain exact on-site service inventory at assigned Cincinnati facilities. Assist Operators and LSA to troubleshoot issues they encounter while using our equipment and provide actionable steps to resolve problems. Maximize the use of production equipment by training users; interpreting instructions; answering questions; providing feedback. Contributes ideas to improving operating instructions to be used by end users, collaborating in a Work Group setting. Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; taking part in professional societies. Other assignments as requested by Management. Job Requirements (Minimum) Proof of U.S. citizenship required. Candidate must be able to obtain and maintain a U.S. Department of State Security Clearance prior to starting work. Up to 50% travel for backup coverage nationally or for training requirements. Academic Qualifications (Desired) CompTIA A+ certification or other related Technical Certifications. 2-year Associates degree in a Technical or Diagnostic field. 4-year Bachelor of Science degree in technical discipline (preferred). Technical military training can be substituted for academic training. Please Note: Equivalent Professional experience is taken into consideration if Academic Qualifications are not available. Professional Experience (Minimum) About Global Enterprise Technologies GET Group employs more than 500 professionals on five continents, with country representation offices in major economic and technological hubs around the world. Since its foundation in 1987, the Group has established and maintained a prestigious reputation in the fields of security printing, smart solutions, and, more recently, robotics and automation. GET Group North America's (GETNA) history spans more than 30 years of milestones, awards, partnerships, and other significant industry achievements. We offer competitive compensation, flexible schedules, and a fun, diverse work environment. Benefit Package & Time Off Includes: Medical, Dental, Vision & Flexible Spending Account 15 Vacation days, 10 Holidays + Sick days Short-Term and Long-Term Disability Safe Harbor 401K

Job DescriptionBenefits: • License Reimbursement, • SImple IRA, • Bonus based on performance, • Competitive salary, • Flexible schedule, • Opportunity for advancement, • Paid time off, • Training & development Grow your career as you better your community. As an attentive, sociable, and sales-minded professional, we are eager to have you on our team. RESPONSIBILITIES: • Provide information about insurance products and services., • Assist customers with policy applications and renewals., • Handle customer inquiries and provide timely responses., • Maintain accurate records of customer interactions.QUALIFICATIONS:, • Communication and interpersonal skills., • Detail-oriented and able to multitask., • Experience in customer service or sales preferred.