Construction safety jobs in Utica, New YorkCreate job alerts

General facility maintenance and repair duties as directed. Pneumatic and direct digital control experience. Knowledge of air conditioning and refrigeration including ice machines. Experienced in troubleshooting and repair of HVAC equipment. Ability to cut and thread pipe to meet base fabrication needs. Maintain and install filter systems. Some knowledge of medical gas systems. Install and maintain circulating pumps. Knowledge of high-pressure steam boilers and delivery systems. Estimate and requisition materials needed for projects. Working knowledge of OSHA, State, DOH and Hospital Safety Standards. Ability to analyze and troubleshoot Electrical controls. Additional electrical experience is helpful. Experienced in all forms of soldering. Ability to understand and complete preventative maintenance programs. Be able to perform heavy lifting and climbing. Ability to perform snow removal duties including shoveling salting and working knowledge of snow plow operations. Strong self-motivation is expected. • 55% Work order response: but not limited to area temperature problems throughout the Facility. Replacing/repairing pump and circulators. Repairing and charging refrigerant systems. Adding or moving equipment for construction projects., • 25% Preventive maintenance duties: Typical but not limited to filter changes, coil cleaning, and belt changes. Ice machine cleaning and service., • 10% Compliance with regulatory responsibilities: Ensure appropriate function is maintained to comply with various regulatory agencies. Refrigerant reclaiming, and Fire barrier repair., • 10% Quality Improvement: to look for ways to improve the patient/visitor experience. Update heating and cooling systems. Modifying or move HVAC components or sensors for improve comfort. Required: • High School or equivalent,, • Associates or higher degree Successful candidates might be required to undergo a background verification with an external vendor. Req Id 89077 Department ENGINEERING Shift Days Shift Hours Worked 7.50 FTE 0.94 Work Schedule UFCSM Employee Status A1 - Full-Time Union 2006 - UFCW Pay Range $21 - $27 Hourly

Job DescriptionJob Title: Industrial Electrician Job Description The Electrician will install, maintain, and repair electrical equipment and control panels. This role requires an extensive knowledge of electrical motor controls, as well as a thorough understanding of electrical safety codes and regulations. The position supports the operations group in the shop and reports directly to the Maintenance & Facilities Manager. Responsibilities • Install, repair, and maintain electrical components on industrial equipment., • Install conduits and cables, ensuring installations comply with electrical codes., • Install circuit breakers and other electrical hardware., • Inspect electrical systems to determine the need for repairs., • Extensive knowledge of electrical motor controls., • Knowledge of 208V and 480V (Delta) 3 phase systems, motor control, and electrical theory., • Understanding of electrical codes, trade practices, and low voltage controls., • Troubleshooting and repair skills for AC and DC drives and controls, instrumentation, and basic calibrations., • Ability to wire integrated systems from advanced wiring schematics., • Basic PC skills., • Ability to work safely on any equipment in the plant., • Currently employed as an Electrician in a manufacturing facility., • Ability to use basic test equipment., • Adherence to defense industry’s initiatives on business ethics and conduct with respect to fraud, waste, and abuse. Join a global manufacturer committed to relentless improvement and exceptional customer service. Benefit from a competitive cost structure, on-time delivery, and industry-leading quality. Be part of a team that values respect, teamwork, technology, and trust. Experience industry-leading process innovations and manufacturing techniques. Work Environment Work in a facility that prides itself on operational excellence and customer satisfaction. The work environment includes the use of advanced technologies and equipment, and a commitment to continuous improvement and quality. Employees are encouraged to practice innovation and maintain a high standard of ethical conduct. Job Type & Location This is a Permanent position based out of Whitesboro, NY. Pay and Benefits The pay range for this position is $66560.00 - $85280.00/yr. Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Workplace Type This is a fully onsite position in Whitesboro,NY. Application Deadline This position is anticipated to close on Mar 11, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Operator Overview: Suit-Kote Corporation, a leading Asphalt products manufacturer, road construction and maintenance and asphalt application engineering company is seeking candidates for an Operator. The ideal candidate will be responsible for setting up, maintaining and operating various pieces of equipment with the ability to operate throughout the day. Safety Expectations: All Suit-Kote employees are required to comply with all safety rules and to always observe safe work practices and operating procedures. Whenever on Suit-Kote property or job sites, or operating Suit-Kote equipment, employees are expected to conduct themselves in a manner that promotes the safety of the employee, co-workers and others. Responsibilities/Job Duties: • Work with others to help complete tasks in a timely manner, • Varying types of work including: Coldmix, and Surface treatment, • Set up and run equipment, • Control and adjust equipment as needed, • Cross train in other departments for back up Required Skills/Abilities: • Reliable transportation to and from work site, • Strong work ethic, • Strong math skills, • Physical Organization and time management, • Flexibility in hours - overtime and weekend hours may be necessary, • Passing a pre-employment drug and alcohol screening is required and a background check will be conducted, • Consent to a DMV license evaluation, • Must have or be willing to obtain an OSHA 10 Hour Safety Certificate and MSHA Training Physical Requirements: • Must be able to lift up to 50 pounds, • Observe and comply with necessary PPE requirements, • Must be able to work in a noisy area with many odors present, • Ability to read and understand SDS, • Ability to work in all types of weather, • Working knowledge of general hand tools and power tools preferred, • Prior construction and/or laborer experience preferred, • Basic computer skills (Microsoft Office), • High school diploma or GED - a two year technical degree is preferred, • Basic math skills Additional Duties: This job description in no way states or implies that these are the only duties to be performed. You will be expected to follow any other job-related instructions and to perform other job-related duties as requested by your supervisor. Equal Opportunity Employer/Veterans/Disabled Job Posted by ApplicantPro

Job Description JOB PURPOSE: To perform the basic functions of a Process Operator the Process Operator I must be able to read, write and understand English. Must be able to read measurements and package materials instructions. A Process Operator I must be able to follow directions, set up packaging and operate a chop saw and heat gun. KEY RESULT AREAS: • Expedite the construction of all required packaging for the days production., • Verify that product kitted and produced is accurately recorded on batch ticket., • Inspect packaging for contamination prior to fill downs and/or pouring., • Process fill down orders that do not require respiratory protection., • Process drum off orders that do not require respiratory protection., • Accurately read and document tape, micrometer, and caliper measurements., • Maintain accurate records., • Ability to safely and efficiently operate a chop saw and heat gun., • Maintain clean and organized environment to ensure a safe work area., • Understand and follow the processes as defined in the Standard Operating Procedures, Safety Manual, and the Quality Policy., • Attend and complete initial Safety Training Program., • Follow all applicable ISO 9001:2015 procedures, cGMP’s, and work instructions to ensure compliance with the documented Quality System., • Other duties and/or projects as may be assigned by Management. MAIN WORKING RELATIONSHIPS: Internal • Work directly with other production personnel, Production Managers and Operation Director., • Work with PIC & Corporate administrative personnel when required. External • None ESSENTIAL JOB FUNCTIONS: * Physical Functions: • Individual must be able to lift 45 to 50 pounds approximately 50 to 100 times per day., • Individual must be able to lift 10 to 50 pounds approximately 50 times per day with additional lifting of lighter weights throughout the day., • Lifting would include “high lifting” which means raising or lowering of bags or pails ranging up to 50 pounds above waist and shoulder level in a vertical direction and “low lifting” which means raising or lowering containers of about 50 pounds up to waist level in a vertical direction., • Work would also include twisting at the waist, stooping crouching and bending the body forward at the waist., • Daily duties would also include pushing (Sweeping) and reaching above their heads., • Individual must be able to operate a pallet jack., • All work must be done by a person capable of working on their feet, walking, and moving about for a full 8-hour day., • Individual must be able to work in environments varying in temperatures depending upon the climate of the area. Mental Functions: • Individual must be able to follow manufacturing/packaging instructions to ensure consistent and quality production., • Individual must be diligent and competent in handling hazardous material products., • Individual must be able read and write in English., • Employees in this role must be able to count and perform basic mathematical calculations., • Employees in this role must be able to read and operate inspection and measurement equipment., • Individual must be able to understand the customary documentation utilized in this position such as Batch Tickets, labels, safety data sheets (SDS) KNOWLEDGE/EXPERIENCE/SKILLS • The Process Operator Level I position requires an awareness of the Company's established policies, rules, regulations, and procedures as they relate to employment, safety and health, ISO 9001, and housekeeping. The jobholder must have basic product knowledge and be proficient in all the manufacturing, packaging, and procedures. The jobholder must also possess the ability to operate all required equipment and processes., • Education and/or Experience – Minimum of High School diploma or GED equivalent., • Language Skills – Must possess the ability to read and write in the English language., • Mathematical Skills – Basic math skills are required (e.g., addition, subtraction, multiplication, and division) Must be able to read a ruler, caliper, and micrometer., • Must follow all safety and quality rules in effect and meet all productivity requirements of the position. #IND123

Job DescriptionDescription: Date: October 1, 2024 Job Summary The Fabricator’s primary responsibility is to assemble stainless steel tanks by cutting, forming, and assembling metal parts using a variety of tools and machinery. Major Responsibilities and Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Fabricate stainless steel vessels and systems to top-quality standards. · Perform fabrication of skids, systems, platforms, and tanks. · Support design and layout documentation in coordination with Engineering. • Demonstrate high proficiency in MIG and TIG welding on stainless steel. · Perform welding duties in the construction, repair, and maintenance of tanks and vessels. · Perform quality control checks to ensure welding meets industry standards and specifications. · Use hand tools including grinders, cutting tools, and polishers. · Actively keeps the work area clean and organized. · Perform assigned duties in a safe and responsible manner, without exposing yourself or other employees to unnecessary risk of injury. · Follows safety procedures/guidelines to ensure a safe work environment including wearing personal protective equipment (PPE) and using appropriate safety equipment and tools. · Collaborate with other team members, such as Grinders, to ensure tanks are produced to the required specifications and quality standards. · All other duties as assigned. Requirements: Job Qualifications and Minimum Requirements • Fabricating experience and knowledge of processes and techniques, • Knowledge of principles and processes of welding stainless steel, • Ability to read and interpret blueprints, • Physical ability to lift heavy materials and work in confined spaces, • Attention to detail and ability, • Ability to work independently and as part of a team, • Previous experience with equipment and tools, including cutting torches, grinders, welders, etc., • Strong communication skills and ability to follow safety protocols, • Willingness to work in various weather conditions and environments This position routinely operates in a medium-noise, non-climate-controlled facility with regular exposure to dust and residue. Machinery is present and in operation. Hours of work are determined based on shift. Physical requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This role requires the employee to occasionally stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; talk or hear. The employee may occasionally lift and/or move up to 50 pounds. Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, the ability to work in confined spaces, and ability to adjust focus. Travel N/A Direct reports None

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Profit sharing Description: Power Line Constructors is seeking a skilled and motivated individual to join our team as a Crane/Boom Truck Operator. The ideal candidate will possess a solid understanding of construction practices and demonstrate exceptional organizational skills, motivation, and reliability. Responsibilities: Performs various physical duties as assigned. Operate crane under general supervision. Manipulate or depress cane controls to regulate speed and direction of crane and hoist. movement according to written, verbal, or signal instructions. Inspect crane for safety issues daily. Determine if any parts are malfunctioning. Complete job tickets, service quality summaries, and all other necessary paperwork. Lift, position and place machinery, equipment, or other large objects at construction sites. Drive trucks to worksites and unload trucks. Place blocks and outriggers to prevent capsizing when lifting heavy loads. Bolt boom sections together to extend or modify boom for pile driving or high lifting. Work within precise limits and standards of accuracy. Operate crane according to signals from helper. Start and stop crane engine. Follow directions carefully. Requirements: Class A or Class F New York State Crane Certificate Must be able to pass a drug test, background check, and fit for duty test. Flexibility to work overtime when necessary. Possess strong interpersonal skills and good relationship building skills. Selfstarter with ability be able to motivate others to improve their quality of work. Excellent team player. Well organized and have excellent time management skills. Salary: $70.16- $84.98 Per Hour Work Location: Various Jobsites throughout New York State Schedule: Day shift (6 AM 3:30 PM) Monday to Friday Benefits: Dental & Vision insurance Health insurance Paid time off Retirement plan This position offers an exciting opportunity to join a dynamic team and contribute to various construction projects. If you meet the qualifications and are eager to take on this role, please submit your application. We look forward to welcoming you to our team!

Train and mentor junior inspectors. Laland Baptiste is seeking a NICET Level III certified Senior Construction Inspector to independently oversee construction phases, ensuring quality, safety, and schedule adherence across major civil infrastructure projects, as part of our continuous recruitment pr

Job DescriptionBenefits: • M&IE and lodging per diem, • 401(k), • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Vision insurance Location: Multiple locations nationwide | Travel Required Company Overview: PLC Trenching Co., LLC is a sister company of Power Line Constructors Inc. and is a leading trenching contractor specializing in underground utility installations for renewable energy, grid hardening, telecommunications, and heavy civil infrastructure projects nationwide. We're committed to safety excellence and providing our team members with the tools and training to build critical infrastructure across America. Position Summary: Support trenching and underground utility installation operations by performing essential manual labor tasks while maintaining the highest safety standards on active construction sites. Key Responsibilities: • Operate hand tools and small power tools for excavation, backfill, and site preparation activities, • Assist with loading, unloading, and organizing materials, equipment, and supplies at job sites, • Support trenching operations by clearing debris, maintaining work areas, and preparing sites for equipment, • Install and remove safety barriers, traffic control devices, and job site signage as directed, • Perform manual excavation around sensitive utilities and in areas requiring precision digging, • Assist with grade checking, threading and pulling cables, and backfill operations, • Maintain job site cleanliness and organization according to company and client standards, • Follow all safety protocols, wear required PPE, and participate in daily safety meetings, • Communicate effectively with crew leaders and team members to ensure efficient operations, • Complete assigned tasks within project timelines while maintaining quality standardsRequired Qualifications:, • High school diploma, GED, or equivalent, • Ability to lift 50+ pounds repeatedly throughout the workday, • Capability to work outdoors in all weather conditions, including extreme heat and cold, • Willingness to travel and work away from home for extended periods (2-8 weeks), • Valid driver's license with a clean driving record, • Ability to pass pre-employment drug screening and background check, • Strong work ethic and reliability with consistent attendance, • Basic understanding of construction safety practicesPreferred Qualifications:, • 1+ years of construction or manual labor experience, • Previous trenching, excavation, or underground utility experience, • OSHA 10-Hour Construction Safety certification, • Experience with construction hand tools and small equipment, • Commercial Driver's License (CDL-A or CDL-B)Work Environment & Conditions:, • Field-based position working on active construction sites nationwide, • Travel required 75-90% of the time, with projects lasting 2-8 weeks, • Standard schedule: 10-hour days, 6 days per week (overtime opportunities available), • Work performed outdoors in all weather conditions on uneven terrain, • Physical demands include frequent lifting, bending, walking, and standing for extended periods, • No CDL: $15.50 - $20.00 per hour, • With CDL-B: $20.00 - $26.00 per hour, • With CDL-A: $26.00 - $32.00 per hourPlus, comprehensive benefits:, • Weekly per diem allowance for meals, incidentals, and lodging during travel assignments, • Health insurance with 60% employer-paid premiums, • 100% employer-paid dental and vision insurance (when enrolled in health plan), • 401(k) retirement and profit-sharing plan, • Paid travel for project rotations, • Opportunities for skills training and career advancement Equal Opportunity Statement: PLC Trenching Co., LLC is an Equal Opportunity Employer committed to workplace diversity. We welcome applications from qualified candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or other legally protected characteristics.

Job DescriptionDescription: With 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. We're growing and looking for Certified Welding Inspectors (CWI) to join our team! As a Certified Welding Inspector, you will have the opportunity for professional growth and advancement with competitive pay. Certified Welding Inspector (CWI) Perks & Benefits: • Competitive Pay, • Competitive Health Insurance, • Paid training and certification with cash bonuses for successful completion, • Advancement career and opportunity planning, • Company vehicle for travel to project sites, • Paid Vacations/Sick/Personal/Holidays, • Safety training and equipment provided, • Strong written and verbal communication skills, • Must be able to lift a minimum of 50 pounds, work from aerial lifts, ladders, scaffolding, and at high elevations., • Proficient in Microsoft Office, • Ability to work with AWS & AISC codes, • Structural inspection, including welding and bolting operations at fabrication facilities and active construction sites throughout New York State., • Perform special inspections in accordance with the applicable building code requirements., • Review project plans and specifications., • Review and perform welding procedure and performance qualification testing.

Job DescriptionDescription: The Maintenance Technician is responsible for overseeing the maintenance and upkeep of the machinery within JBF Stainless. This position directs and organizes all tasks related to maintenance of equipment and the building. Please note this is not a housekeeping or groundworks position. · Use equipment, including welding tools, power tools, hand tools, electric tools, and plumbing tools. · Works directly with technicians and other employees to achieve goals. · Responds to repair and maintenance requests in a timely fashion. · Order parts, supplies, and equipment as needed to support maintenance operations. ·Coordinates the installation, repair and maintenance of machinery also the building as needed. · Develops and implements maintenance schedules, prioritize tasks and allocate the resources to optimize efficiency. · Establishes and oversees preventative maintenance programs to minimize downtime and extend the lifespan of equipment. · Ensure all maintenance actives adhere to the safety regulations and company policies. · Coordinates the functionality, delivery and install necessary equipment. · Provides technical assistance to employees. · Follows local and state building codes. · Load and unload equipment and tools as needed. · Obtain and inventory necessary replacement parts for all shop equipment. · Reads and follows manuals, blueprints, and other written instructions. · Follows safety procedures/guidelines to ensure a safe work environment including wearing personal protective equipment (PPE) and using appropriate safety equipment and tools. · Other duties as assigned. Requirements: · Previous experience in manufacturing shop maintenance or a combination of building maintenance, construction, plumbing, electrician experience, hydraulic experience, and electrical control panel experience. · Ability to read and interpret blueprints · Ability to work with measurement tools · Physical ability to lift heavy materials and work in confined spaces · Attention to detail and ability · Ability to work independently and as part of a team · Strong communication skills and ability to follow safety protocols · Willingness to work in various weather conditions and environments · Ability to frequently stand and walk · Must have a valid driver’s license

Job Description Employment Type: Full-Time FSLA: Salary/Exempt Salary Range: $95,000.00 - $110,000.00 Division: Project Management Department: Project Management Reports to: Project Manager Supervisory Duties: Yes The Assistant Project Manager (APM) will serve as a vital team member while assisting the Senior Project Manager and/or Project Manager on all aspects of a project. APM’s will be expected to take on central roles for the oversight of the Project Engineer with a specific focus on document control (RFIs, submittals, material delivery, etc.), subcontractor coordination, design team communication, project reporting and overall representation of Consigli throughout the entirety of the project. Responsibilities / Essential Functions • Serve as a main point of contact for communication with Owners, OPMs and Design Teams members., • Coordinate and provide input during weekly meetings with subcontractors, design teams, and owner representatives to resolve field conflicts and drive resolution., • Support project cost and change management process: prepare reports for review with other team members and present at both Owner and internal meetings., • Assist in development of estimates and bid proposals for both lump sum and GMP projects., • Oversight/Management of Project Engineer and associated responsibilities including document Control, RFIs, Submittals, Material Delivery Tracking and Meeting Minutes., • Mentor: support, develop, and train supporting team members, including Project Engineers., • Maintain close relations with subcontractors, including early notification of submittal & material delivery schedule expectations., • Monitor executed subcontracts and insurance certificates; verify contracts and insurance are in place prior to commencing work., • Coordinate with Project Scheduler to update and distribute project master schedule with input from Superintendent and project team., • Assist the project Superintendent and other team members in the resolution of all critical issues, RFI’s, etc. with a focus on quality, cost and schedule; provide documentation as necessary., • Take ownership of the closeout process: complete and implement project closeout checklist., • Manage close-out documentation (as-builts, O&Ms, warranties, test reports, etc.) for submission to Design Team and Owner., • Manage financial closeout process with subcontractors and Owner., • Punch List: Upload and distribute the punch list through Procore to subcontractors., • Assist with coordinating work completion as required and maintain an accurate log of items to be completed., • Observations and Field Reports: work with project team to conduct field walks as necessary and compile any corresponding documentation accordingly. Review Design Team field reports and work with required parties to resolve open items and drive to resolutions., • Safety: perform regular safety walks with field and safety staff and record observations. Key Skills, • Strong communication skills., • Ability to review, understand and support all change management processes., • Strong initiative and problem-solving abilities., • Ability to multi-task and self-prioritize., • Motivated and driven., • Ability to work in a team environment with a primary focus on collaboration., • Excellent written and verbal presentation skills. Required Experience • A bachelor's degree in engineering, Construction Management or Architecture preferred., • 3 - 5 years’ experience within the construction industry in project management or similar role., • OSHA 10 and OSHA-30 preferred., • Additional proficiencies may include cost management software (Timberline, Sage preferred), scheduling software (Primavera P6 preferred) and construction management software (Procore preferred).

Job DescriptionDescription: Fisher Associates is seeking a Construction Inspector / Resident Engineer (NICET III or IV) to oversee a culvert replacement project in the Town of Kirkland. The duration is expected to be approximately 1.5 months. Location: Town of Kirkland Project Duration: Approx. 1.5 months For confidential inquiries: Email: Call or Text: (315) 790-2512 What you will do: • Perform on-site inspections to confirm construction activities match approved plans and codes, • Identify and report any deviations from approved plans and specifications, • Ensure work complies with local, state, and federal requirements, • Keep clear inspection records, including photos and notes, • Prepare inspection reports and document needed corrections, • Work with project teams including contractors, project managers, and engineers to discuss inspection results and address any issues, • Attend meetings and provide inspection updates, • Provide recommendations to bring non-compliant work up to standard, • Monitor material quality and workmanship, • Oversee job sites for safety compliance, • Report and address any safety hazards or violations promptly, • NICET Level III or IV certification (or NYSDOT equivalent experience) The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to lift up to 25 pounds at a time., • Must be able to access and navigate construction sites, • Ability to transverse uneven grounds. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Fisher Associates is an Equal Opportunity Employer. #LI-DNP

Job DescriptionDescription: At Atlantic Testing Laboratories (ATL), we offer a dynamic career that blends fieldwork with office assignments. With more than 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. ATL is an expanding firm and is in search of qualified Geologist/Engineer candidates. Experienced and entry level/early-career candidates are encouraged to apply. Geologist/Engineer Perks & Benefits: • A mix of field and office assignments, • Directed experience and financial support for professional licensure (EIT, PE, IG, PG), • Work directly with Senior Engineers and Project Managers, • Advancement opportunity, • Company vehicle to travel between office and job sites, • Competitive Health Insurance: multiple plans offered, • Paid Vacation/Sick/Personal/Holidays, • Safety training and equipment, • B.S. in Geology, Civil Engineering, Civil Engineering Technology, or related degree, • Strong written and verbal communication skills, • Ability to review and interpret project plans and specifications, • Ability to effectively multitask, • Positive attitude with ability to work independently and in a team environment, • Perform evaluation of subgrade preparation for shallow foundations, • Monitor the installation of deep foundation systems, • Perform construction materials testing, geotechnical evaluations, and special inspections during construction, • Provide technical support to Construction Materials Technicians, • Project Management duties including preparation and review of proposals, client management, technical reviews of reports, and review of project invoices, • Preparation and distribution of technical reports and project correspondence Requirements:

Job DescriptionBenefits: • Paid travel, • M&IE and lodging per diem, • 401(k), • Bonus based on performance, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Profit sharing, • Training & development Company OverviewPLC Trenching Co., LLC is a leading trenching contractor specializing in underground utility installations for renewable energy, grid hardening, telecommunications, and infrastructure projects nationwide. We're committed to safety excellence, innovation in sustainable practices, and fostering a supportive team environment where employees thrive and advance. With over 25 years of experience, we've completed hundreds of projects across the US, installing over 27 million linear feet of trenches to power progress in wind, solar, and heavy civil industries. Position SummaryYou will operate heavy equipment, such as trenchers, backhoes, excavators, dozers, skid steers, and fork trucks, to install and maintain underground utilities. Your work will directly contribute to efficient operations and our mission of building reliable infrastructure for a sustainable future. Key Responsibilities • Operate various equipment, including:, • Trenchers, backhoes, and excavators for the installation or maintenance of underground utilities., • Dozers or motor graders to grade and backfill trenches on uneven terrain, following reference stakes for precision., • Skid steers with compaction wheels to compact backfill and perform other tasks, • Fork trucks to load/unload cable reels, set up equipment, and operate in close quarters with other equipment., • Perform routine maintenance on equipment, including greasing, oiling, and diagnosing defects to minimize downtime., • Collaborate with foremen, subcontractors, and teams to meet project timelines, providing feedback for improvements., • Follow all safety protocols, which include safe equipment operation, wearing required PPE, and participating in daily and weekly safety meetings., • Participate in sustainable practices, such as minimizing environmental impact during excavations.Required Qualifications, • High school diploma, GED, or equivalent., • 2+ years of experience with construction, excavation, and related heavy equipment operation., • Valid driver's license with a clean driving record., • Proficiency in operating equipment like Vermeer trenchers or Caterpillar excavators., • Willingness to travel 100% and relocate to job sites nationwide (projects average 6-12 months)., • Strong communication skills for team collaboration and safety protocols., • Capability to lift 50+ pounds, perform manual labor, handle frequent bending and lifting, and work outdoors in all weather conditions, including extreme heat and cold., • Ability to pass pre-employment drug and alcohol screenings and background checks.Preferred Qualifications, • Class A or B Commercial Driver's License (CDL)., • OSHA 10-Hour Construction Safety certification., • Knowledge of equipment maintenance, including electrical and mechanical, and diesel/gasoline engines., • Hands-on experience in construction or underground utility projects., • Experience with construction hand tools and power equipment.What We OfferWe offer competitive compensation based on experience (starting at $25-$50/hour), plus comprehensive benefits designed to support your well-being and growth:, • Daily per diem allowance for meals, incidentals, and lodging., • Health, dental, and vision insurance (60% employer-paid health; 100% for dental/vision if enrolled)., • 401(k) retirement and profit-sharing plan., • Paid travel for project rotations., • Collaborative team environment with opportunities for growth in sustainable projects., • Paid training programs and mentorship for career advancement., • Additional perks include year-round employment stability.Work Environment & Conditions, • Field-based with 100% travel; per diem for meals/lodging and paid transportation provided., • Schedule: Monday-Saturday, 7 AM-5 PM, with overtime during peaks and flexibility for family needs., • Outdoor exposure to weather (rain, heat); safety gear and training supplied., • Physical demands: Lifting, bending, and operating machinery; accommodations for disabilities. Equal Opportunity StatementPLC Trenching Co., LLC is an Equal Opportunity Employer committed to workplace diversity. We welcome applications from qualified candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or other legally protected characteristics. We encourage individuals from underrepresented groups in the construction industry to apply.

Job DescriptionSummary:We are representing a reputable general contractor seeking an experienced Project Manager to oversee multiple construction projects within the K-12, higher education, healthcare, and tenant improvement sectors. The ideal candidate will manage projects from preconstruction through closeout, ensuring safety, quality, schedule, and budget goals are consistently met. This opportunity is ideal for someone who values teamwork, communication, and delivering successful projects for clients in active environments. Key Responsibilities: * Manage multiple projects from start to finish, ensuring alignment with client expectations and project goals * Coordinate all phases of construction including estimating, scheduling, procurement, and closeout * Build and maintain strong relationships with clients, consultants, and trade partners * Lead project meetings and oversee documentation including RFIs, submittals, and change orders * Manage budgets, cost tracking, and billing to ensure financial accuracy and accountability * Support superintendents and field staff in maintaining jobsite safety and quality * Develop and monitor project schedules, identifying and resolving potential delays * Communicate regularly with owners and leadership to report on progress and issues Qualifications: * Bachelor’s degree in Construction Management, Engineering, Architecture, or related field preferred * Minimum 5+ years of experience managing commercial projects * Experience in K-12, university, healthcare, or tenant improvement construction required * Strong understanding of estimating, contracts, scheduling, and document control * Excellent leadership, communication, and problem-solving skills * Proficient with Microsoft Office; familiarity with project management software such as Procore or similar tools preferred Compensation + Benefits: * Competitive salary based on experience * Comprehensive medical, dental, and vision insurance * 401(k) retirement plan with company match * Paid time off and holidays * Tuition reimbursement and professional development support * Collaborative and supportive work environment focused on career growth

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Profit sharing Key ResponsibilitiesEstimating Duties • Monitor platforms such as NYSDOT, NYSTA, and Builders Exchange to identify projects of interest for bidding., • Perform takeoffs to determine or confirm project items and quantities., • Review bid documents, identifying unclear or incomplete aspects and requesting necessary clarifications., • Solicit and evaluate quotations for materials and subcontractors to ensure compliance with project specifications and cost-effectiveness., • Secure participation from MBE, WBE, SVDOB, or DBE firms as required to meet project award criteria., • Compile labor, equipment, and material quantities to prepare comprehensive and competitive bids.Project Management Duties, • Prepare and submit catalog cuts, shop drawings, and material certifications for project approval., • Manage the buyout of materials and subcontracted work to align with project budgets and timelines., • Act as a liaison with general contractors to schedule work around crew and material availability., • Coordinate material deliveries and ensure timely availability on-site., • Monitor project quantities and billings to ensure alignment between installations and invoiced amounts., • Develop and submit Agreed Prices using Weighted Average Bid Price or new workup (MURK) for added project items., • Create and submit as-built drawings and project-specific drawings as required., • Manage Digsafe tickets and Electric Service Orders and coordinate electrical inspections to ensure compliance and safety.Qualifications, • Bachelors Degree in Construction Management, Civil Engineering, or a related field (preferred), or equivalent experience., • Proven experience of more than 3+ years in construction estimating and project management., • Excellent analytical skills with the ability to read and understand construction plans, perform accurate takeoffs, and create cost estimates., • Proficiency in Microsoft Office Suite and other relevant software, like NYSDOT, NYSTA, and similar bidding platforms and processes, is an added advantage., • Strong organizational and communication skills to manage multiple projects and deadlines., • Proficient in coordinating with subcontractors, suppliers, and general contractors., • Familiarity with MBE/WBE/SVDOB/DBE participation requirements., • Knowledge of Digsafe protocols, electrical inspections, and construction documentation processes.What We OfferWe offer a competitive salary based on experience and certifications, along with benefits that include:, • Health insurance with 60% employer-paid premiums., • 100% employer-paid Dental & Vision Insurance (when enrolled in the health plan)., • 401K & Profit Sharing Plan., • Opportunity to work on diverse and impactful projects with a reputable company., • Supportive team environment with opportunities for professional growth.Who We ArePower Line Constructors, Inc. is a leader in outside electrical construction across the Northeastern USA. We specialize in Smart Highway traffic signal systems, highway and decorative lighting systems, fiber optic telecommunication networks, and more. Headquartered in Clinton, NY, we bring over 60 years of industry experience and a commitment to innovation, safety, and excellence. How to ApplyPlease submit your resume and a cover letter detailing your relevant experience to . For more information about Power Line Constructors, Inc., visit our website. Power Line Constructors, Inc. is an equal opportunity employer and values diversity in our workforce.

Job Description *Applicants MUST submit a cover letter with resume to be considered. *This position will require in-office presence. Hybrid work schedules may be possible based on specific job duties and consistent with ESD policy. *Minorities, women, and individuals with disabilities are encouraged to apply. Please contact Human Resources if you require an accommodation. BASIC FUNCTION: The ConnectALL Office seeks candidates for the role of Director, Field Inspection. Reporting to the Assistant Vice President of Broadband Deployment, the ideal candidate will possess exceptional leadership abilities, program and project management skills, and the ability to effectively collaborate with internal and external stakeholders. The role offers a candidate with deep experience in broadband construction methodologies the opportunity to implement a field inspection program that encompasses rights-of-way permitting, pole licensing, and quality assurance inspections at scale across ConnectALL funded broadband infrastructure projects. WORK PERFORMED: • Collaborate with internal and external stakeholders, including engineering teams, legal departments, regulatory agencies, and utility companies to formulate recommendations and facilitate improvements to the pole make-ready process, permitting, and inspection procedures., • Establish and maintain relationships with pole and joint pole owners across all carriers, ensuring compliance with regulations and standards., • Identify and incorporate applicable local, state, and federal regulations into the ConnectALL inspection procedures., • Coordinate resources to and/or directly conduct detailed physical audits of projects at varying stages to verify construction progress and confirm that completed projects comply with approved project proposals and applicable safety regulations., • Identify measurable quality assurance inspection milestones to support project implementation and program completion deadlines., • Develop and implement inspection procedures, quality assurance plans, and acceptance criteria for inspection, testing, and approval of wireline and wireless broadband installations., • Define and implement procedures for deployment corrections or modifications, when necessary., • Identify and incorporate relevant data attributes into the inspection program to maintain records of inspection results, track progress of completed inspections and deficiency remediation; work with ConnectALL leadership to ensure secure and organized storage of all records, with ability to generate reports., • Identify and communicate project risks, deployment concerns, progress updates to ConnectALL leadership, as needed., • Identify and procure tools, equipment, and software necessary to support field inspection and verification activities., • Other tasks as needed to implement the Governor’s ConnectALL agenda. MINIMUM REQUIREMENTS: Education Level Required: Bachelor’s degree. Associate’s degree with 7 years, direct relevant experience may substitute. Relevant Experience required: A minimum of 7 years of experience focused on field inspection and/or outside plant telecommunications construction and installation. Certified Fiber Optic Technician (CFOT). Experience with State and local permitting agencies and processes such as DOT, local municipalities, and private ROW owners. Experience with inside plant construction, in building wiring and roof rights and regulations associated with the deployment of broadband infrastructure and buildings. Knowledge Required: Knowledge of and experience with broadband delivery technologies, network designs and topologies, and technical and regulatory issues related to broadband and telecommunications deployment. Must be able to translate experience deploying broadband projects in the field into systems for evaluating, inspecting, and reporting on infrastructure projects funded by ConnectALL. Experience generating or reviewing as-built documents, bill of materials, and other documentation of broadband projects. Experience with broadband deployment, including both aerial and underground fiber placement and fixed wireless deployment. Experience with Microsoft Excel, ArcGIS and Google Earth preferred. Professional Engineer license preferred. Experience with State and local permitting agencies and processes such as DOT, local municipalities and private ROW owners.

Job Description Employment Type: Intern Division: Field Operations Department: Field Operations Salary Range: $23 - $28/Hour The Field Operations Intern supports Superintendents and Project Managers by assisting with safety program administration, quantity tracking, schedule analysis, and job site documentation. This role offers hands-on experience in field coordination, schedule management, and construction quality within a dynamic construction environment. Responsibilities / Essential Functions • Support the administration of the project safety program to ensure a safe and compliant work environment., • Provide technical assistance by interpreting contract drawings, submittals, and project documentation., • Assist the assistant superintendent, superintendent, and project manager with daily and weekly activities, including preparing daily reports, conducting safety walks, compiling quantity reports, and updating project schedules., • Develop a clear understanding of the overall project schedule, including critical path analysis., • Review and contribute to the short-term planning process to ensure project milestones are met., • Participate in the quality assurance program by attending meetings, performing site inspections, and verifying materials for compliance with project specifications., • Coordinate subcontractor activities to support adherence to project timelines and safety requirements., • Maintain project documentation such as daily logs, RFIs, and submittal tracking to support effective communication and record-keeping., • Monitor onsite material deliveries and inventory to facilitate uninterrupted project progress., • Participate in project team meetings, communicating updates, challenges, and potential solutions., • Observe and report site conditions that could impact schedule, cost, or safety., • Utilize construction management software and tools to accurately track and update project information. Key Skills • Strong written and verbal communication skills to clearly convey information and coordinate with team members, clients, and subcontractors., • Demonstrated interest in construction management and the construction industry., • Proactive problem-solving abilities with an analytical mindset and excellent attention to detail for tracking schedules, quantities, and quality inspections., • Effective time management and prioritization skills to handle multiple tasks and meet deadlines in a fast-paced environment., • Strong organizational skills to manage project documentation and communications., • Ability to work independently and collaboratively within team environments., • Adaptable and eager to learn, with a team-oriented approach to support multiple stakeholders and address site challenges proactively. Required Experience • Currently pursuing a Bachelor’s degree in Construction Management, Engineering, or related field; preference for Civil Engineering or construction-focused programs., • Basic knowledge of construction site safety standards, practices, and protocols., • Proficient in Microsoft Office Suite (Excel, Word, Outlook) with aptitude for learning construction management software., • Ability to read and interpret construction drawings, submittals, and technical documents., • Strong organizational skills for managing documentation and reporting., • Basic understanding of construction scheduling, including critical path method (CPM) concepts.

Job DescriptionBenefits: • Paid travel, • M&IE and lodging per diem, • 401(k), • Bonus based on performance, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Profit sharing, • Training & development Company OverviewPLC Trenching Co., LLC is a leading trenching contractor specializing in underground utility installations for renewable energy, grid hardening, telecommunications, and infrastructure projects nationwide. We're committed to safety excellence, innovation in sustainable practices, and fostering a supportive team environment where employees thrive and advance. With over 25 years of experience, we've completed hundreds of projects across the US, installing over 27 million linear feet of trenches to power progress in wind, solar, and heavy civil industries. Position SummaryYou will maintain and repair our fleet of trenchers and heavy equipment, ensuring peak performance on job sites across the country. Your expertise will directly contribute to efficient operations and our mission of building reliable, sustainable infrastructure. Key Responsibilities • Perform repairs and maintenance on heavy equipment, including PLC Rivard trenchers, backhoes, excavators, dozers, and ancillary tools., • Operate machinery to diagnose defects, troubleshoot issues, and verify repairs., • Weld, fabricate, and hard-face wear components on trenchers to extend equipment life., • Conduct thorough inspections of all company equipment and submit detailed inspection forms., • Order parts, complete requisition forms accurately, and manage inventory to minimize downtime., • Assist supervisors, co-workers, and subordinates with mechanical tasks, providing training and guidance as needed., • Communicate maintenance concerns effectively with crew leaders and team members., • Follow all safety protocols, wear required PPE, and participate in daily safety meetings., • Maintain a clean, orderly work area and equipment to support efficient operations., • Complete assigned tasks within project timelines while maintaining quality standards.Required Qualifications, • High school diploma, GED, or equivalent., • 2-5 years of related mechanical experience in heavy equipment., • Willingness to travel 100% and relocate to job sites nationwide., • Ability to lift 50+ pounds, perform manual labor, handle frequent bending and lifting, and work outdoors in all weather conditions, including extreme heat and cold., • Strong oral and written communication skills with excellent collaboration abilities., • Ability to pass pre-employment drug and alcohol screenings and background checks., • Valid driver's license with a clean driving record.Preferred Qualifications, • Completion of a 2-year post-secondary mechanical program., • Comprehensive knowledge of equipment maintenance, including electrical, mechanical, hydraulic, pneumatic, emissions systems, and diesel/gasoline engines., • Class A or B Commercial Driver's License (CDL)., • OSHA 10-Hour Construction Safety certification., • Hands-on experience in construction or underground utility projects., • Experience with construction hand tools and power equipment.What We OfferWe offer competitive compensation based on experience (starting at $30-$50/hour), plus comprehensive benefits designed to support your well-being and growth:, • Daily per diem allowance for meals, incidentals, and lodging., • Health, dental, and vision insurance (60% employer-paid health; 100% for dental/vision if enrolled)., • 401(k) retirement and profit-sharing plan., • Paid travel for project rotations., • Paid training programs and mentorship for career advancement., • Collaborative team environment with opportunities for growth in sustainable projects., • Additional perks include year-round employment stability.Work Environment & Conditions, • Field-based with 100% travel; per diem for meals/lodging and paid transportation provided., • Schedule: Monday-Saturday, 7 AM-5 PM, with overtime during peaks and flexibility for family needs., • Outdoor exposure to weather (rain, heat); safety gear and training supplied., • Physical demands: Lifting, standing, bending, walking, pushing, reaching, fine dexterity, and operating machinery for extended periods; accommodations for disabilities. Equal Opportunity StatementPLC Trenching Co., LLC is an Equal Opportunity Employer committed to workplace diversity. We welcome applications from qualified candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or other legally protected characteristics. We encourage individuals from underrepresented groups in the construction industry to apply.

The Construction Project Safety Manager is responsible for ensuring safety job sites by managing safety programs, policies, and communication at site stakeholders to ensure a safe work environment on assigned project sites. Montante Construction is seeking a Construction Project Safety Manager to jo

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Deter, detect and/or report violations of security and safety policies/ regulations. Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Allied Universal - - Responsibilities: Provide customer service to patients, visitors, and staff by following site-specific procedures, access guidelines, and emergency response activities appropriate for a healthcare location.Respond to incidents, alarms, and critical situations in a calm, problem

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Securitas - - Responsibilities: Customer service; Access control; Emergency response including patient restraints; Report writing; Interior and exterior foot patrols.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Hold foremen accountable for attending safety meetings and adhering to safety protocols. Exposure to construction and plant environments that may include dirt, noise, limited climate control, and safety hazards. Partner with the Safety Manager to maintain required safety training for all foremen.

Work in a fast-paced, armed, and safety-critical environment where attention to detail, judgment, and professionalism are essential; frequent duty in rotating shifts, including nights, weekends, and holidays, to provide 24/7 security and law enforcement coverage; exposure to stressful situations inv

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Millwright Field Superintendent (Industrial Construction). Hohl Industrial Services is seeking an experienced Millwright Field Superintendent to lead and support field operations across a variety of industrial construction and service projects. Partner with the Project Manager during pre-constructio

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si