Trabajos construction supervisor en Cherry Hill, New JerseyCrear alertas

Job DescriptionDescription: Stitch weld, full weld components and assemblies with GMAW process. Knowledge of oxy/acetylene and plasma cutter use a plus. Must be able to read tape measure and basic print reading. Will also use basic hand tools and grinder at times. Job Summary: This position reports to the Department Supervisor. The ideal candidate should possess knowledge of machines and tools including their design, uses, repair, and maintenance. Responsibilities: • Identify and implement efficiency improvements, cost reductions and profit improvement initiatives., • Accident prevention – correct and/or report any unsafe working conditions before they result in an accident., • Reads blueprints., • Lay out, measure, and mark dimensions and reference lines on material, such as roofing panels, according to drawings or templates, using calculators, scribes, dividers, squares, and rulers., • Drill and punch holes in metal, for screws, bolts, and rivets., • Fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items., • Fabricate or alter parts at construction sites, using shears, hammers, punches, and drills., • Trim, file, grind, deburr, buff, and smooth surfaces, seams, and joints of assembled parts, using hand tools and portable power tools., • Operate safety equipment and use safe work habits., • Weld components in flat, vertical, or overhead positions., • Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits., • Clamp, hold, stich-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding., • Will also use basic hand tools and grinder at times., • Detect faulty operation of equipment or defective materials and notify supervisors., • Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding., • Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material., • Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications., • Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment., • Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers., • Lifting production objects of up to 50lbs., • Performs other duties as assigned. We offer benefits to our full-time employees that include: • Health Insurance, • Dental Insurance, • Vision Insurance, • Basic and Voluntary Life, • Long-Term Disability, • Flexible Spending Accounts, • Employee Assistance Program, • Paid Time Off, • Paid Holidays, Bereavement, Jury Duty, • 401(k) with company match Location: This position is onsite (non-remote) at the Company’s corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Company’s normal hours of operation. Requirements: Education: High school Diploma or equivalent Experience: The candidate should possess 2-5 years of welding experience, able to read blueprints. Must pass AWS 4G welding test. Knowledge of oxy/acetylene and plasma cutter use a plus. Must be able to read tape measure and basic print reading. WE ARE AN EQUAL OPPORTUNITY EMPLOYER COMMITTED TO HIRING A DIVERSE WORKFORCEEOE/Minorities/Females/Veterans/Disability

FIELD SALES AND MARKETING REPRESENTATIVE – Techtronic Industries, NA (TTI) About Us: TTI (Techtronic Industries) is a fast-paced, high energy, organization that rewards out-of-the-box thinking to foster innovation allowing us to be the best in our industry. We provide a multi-faceted training program and hands-on field experience that will stimulate, challenge, and reward you. TTI is a world-class leader in design, manufacturing and marketing of power tools and accessories, outdoor product equipment, and floor care products. Our consumers range from professional and industrial users in the home improvement, repair, and construction industries to homeowners & DIY enthusiasts. Our unrelenting strategic focus on powerful brands, innovative products, operational excellence, and exceptional people drives our culture. This focus and drive provides TTI with a powerful platform for sustainable leadership and strong growth. Our brands and products are recognized worldwide for their deep heritage, superior quality, outstanding performance, and compelling innovation. Our products include professional power tools and accessories, outdoor power equipment, and floor care. Our brands include Milwaukee®, AEG®, Ryobi®, Hart ®, Oreck®, Hoover®, Dirt Devil® and Vax®. In this position, you will drive sales of our premier product lines within one of our largest retail partners. This position will allow you to enhance your selling, account management, and communication skills while launching your career in a fast-paced and extremely rewarding company. Duties and Responsibilities: • Exceed sales targets by delivering best-in-class Business to Consumer sales and customer service within The Home Depot, engaging directly with customers to understand their needs and recommend tailored TTI product solutions, all while demonstrating deep product knowledge and enthusiasm, • Plan and execute promotional events, product demos, and store walks to drive consumer engagement and increase product sell-through, • Support and implement strategic corporate brand marketing initiatives and promotional activities to increase brand awareness and drive sell-through, • Ensure brand presence and sales-readiness through strategic merchandising, optimal product placement, and completion of store objectives and resets—leveraging data analytics through Microsoft Power BI to drive decisions and maximize impact, • Develop a strong understanding of the retail marketplace, including customer profiles, product applications, competitive landscape, and channel dynamics, • Participate in TTI’s world class training program to be equipped with the knowledge to work independently within your assigned market, • Build and manage relationships with The Home Depot team members to enhance in-store execution and cultivate long-term business partnerships, • Effectively manage inventory levels through down-stocking, maintaining product accessibility, and ensure prompt reporting of all tasks and responsibilities, • Participate in merchandising resets to support TTI’s relentless innovation, ensuring the timely placement of cutting-edge products and solutions that drive growth, competitive advantage, and meet evolving market needs, all while adhering to TTI’s safety protocols Note: Employee's duties and responsibilities are not limited by the above. Other duties may be assigned as deemed necessary by the employee's supervisor. In addition to the basic requirements of the position, all employees are expected to meet the company's goals of continual improvement in the areas of knowledge, skills, processes, and quality. Job / Employment Requirements: • Must be at least 21 years of age or older, • Eligible to work in the United States without sponsorship or restrictions, • Ability to pass drug screening and Motor Vehicle Report screening, • Must have a valid United States driver’s license for at least one continuous full year in one state, • Must have a personal vehicle / reliable form of transportation, • Possess and maintain valid personal vehicle insurance listing you as the primary driver, • Position requires travel to/ from assigned store location(s) as well as occasional travel for meetings, projects, events, etc. Air travel will be required, • Employees will also be required to transport a small amount of company property (company devices, demo tools, tool kit, safety supplies), • Capable of reaching and/or lifting overhead in addition to ascending/descending ladders to move product, • Capable of lifting and transporting heavy tools (up to 50 lbs.) and requesting assistance as needed, • Capable of using hands to maneuver small objects, assemble tools and build displays, • Ability to work nights and weekends – weekends will be required at different points throughout the year, • Ability to work in a retail environment full time and stand for the duration of the shift, with the exception of meal and rest breaks, • Applicant should be self-motivated and a team player with strong organizational, planning and time management skills, • The applicant must be MS Office proficient, • Multilingual abilities preferred in specific markets depending on business needs, • Formal higher education preferred but not required – Equivalent experience will be considered, • Relocation may be required for future promotional opportunities Compensation and Benefits: • Salary Non-Exempt Position (Overtime Eligible), • The pay range for this position is $24.04 and $25.96/hour equating to a Target Annual Salary of $50,000 - $54,000, • Sales Contests and Incentives to Earn Additional Income (In Correlation with Business Needs / Focuses), • Vehicle Allowance of $400/month equating to a target of $4800/year (pre-taxed) dispersed evenly across the 52 weeks in a year, • Company iPhone and iPad, • Medical, Vision, and Dental Benefits Available, • Insurance Coverages Available such as Short-Term Disability, Long Term Disability, Basic Life Insurance, Basic AD&D, and more, • 401K (Company Matches 50% up to 8% of Employee’s Salary), • Eligible for up to 10 Paid Holidays (Based on hire date), • Accrue up to 104 hours of PTO – 1st Year – Based on hire date, • Relocation assistance if moving for the position based on needs of the business, • Employee Referral Bonus Program and other incentive initiatives Locations available Nationwide. To learn more about TTI, visit our website at .

Job Description Maintenance Technician I, II, & III Job Description: The Maintenance Technician is a reliable, trustworthy professional responsible for the overall Maintenance and operations of the community. This involves ensuring a safe and secure living environment for Residents, Visitors and Associates. The Maintenance Technician will continually improve operating conditions, quality, and integrity of all building systems and appearances, while delivering superior customer service to our Residents. Reports to: Maintenance Supervisor Wage Status: Non-Exempt (Eligible for overtime) Job Responsibilities: • Independently performs only those maintenance and repairs that do not require a license or performs maintenance and repairs under the supervision of a licensed technician., • Completes repairs, troubleshoots systems, and preventative maintenance in a timely manner., • Must have the ability to follow oral and written instructions and be able to maintain effective and cooperative working relationships., • Participates in on-call emergency rotation and responds to emergencies as needed., • Completes work orders in vacant units, ensuring turnovers are completed on schedule and meets or exceeds community standards., • Utilizes maintenance program to track work orders, preventive maintenance, inventory, product replacement histories., • Ensures tools and equipment are in optimum condition and reports any unsafe situation immediately., • Complete grounds work such as: trash pick-up, sweeping and light landscaping. Removes snow and ice from sidewalks, walkways, steps, and driveways. Diligently monitors the community for slip, trip and fall hazards., • Coordinate special projects as directed. Including assisting during the event, setting up, monitoring, moving furniture, equipment and breakdown., • Conducts all business with integrity in accordance with company policies and procedures, local, state and federal laws; OSHA, ADA, Fair Housing, etc. Requirements: • High School diploma or formal technical training., • 2 years working experience in maintenance or construction., • Entry-level knowledge of building programs, including inventory control, preventative maintenance, and work order record keeping., • Entry-level knowledge of mechanical systems and equipment including HVAC, plumbing repairs, carpentry, painting, electric systems and landscaping., • Meets all physical requirements to perform all job functions and responsibilities., • Valid Driver's License and reliable transportation required., • Ability to perform heavy lifting (at least 60 lbs), climb ladders up to 24 ft, stand and walk for 8 hours, and perform other physically demanding duties as directed., • Ability to communicate clearly and effectively with customers, colleagues and supervisors in spoken and written English to ensure successful completion of job duties. Post Brothers provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Post Brothers complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Responsibilities include but not limited to: • Apartment maintenance (i.e. electrical, plumbing and appliance repair)., • Apartment turnovers., • Troubleshoot, repair and/or replace fixtures, toilets, light switches, appliances, garbage disposals, ceiling fans, etc., • Preventative maintenance., • Special building wide projects. (Framing, Drywall, flooring, Cabinet install, tile, etc.), • Performs related work as required., • Aid in maintaining all buildings, common areas, and grounds in a safe and clean manner, • Perform special assignments as need it, or required by the Maintenance Supervisor or Property Manager, • Prepares or assists in preparing all vacant apartments to a market ready condition, • Maintain regular and on-call work schedules appropriate to property needs, • Performs various community maintenance functions including light bulb changes, filter changes, lock repairs, window blind installation, HVAC repairs, caulking, and vinyl repair, • Responds to resident service requests and concerns in a timely manner, • Reports any needed repairs on vacant apartments, models, clubhouse, and/or common areas to the Maintenance Supervisor, • Assists in monitoring maintenance inventory, • Be able to operate hand tools normally used in construction and power tools including drills, circular saws, key machine, chain saw, reciprocating saw, and hammer drill, • Assists the Maintenance Supervisor with special projects if necessary, • Consistently maintains a professional and courteous attitude when dealing with residents, coworkers, and the general public, • Attends training seminars when requested, • Maintains regular and consistent attendance and punctuality to ensure all essential duties are fulfilled to satisfactory level Must Have • 3-5 years’ experience residential property maintenance, • Valid Driver's License Required, • Well organized, detail oriented and efficient, • Team oriented with ability to work independently on occasion, • Ability to prioritize and multi-task, • High school diploma or equivalent Certifications are a Plus but not Mandatory. Must Have basic hand and power tools Must be able to be part of a 24-hour emergency on-call rotation Company DescriptionProperty management specializing in student housing.Property management specializing in student housing.

Job Description About Sungrow: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: The Electrical Engineer position is a hybrid or Onsite position depending on the department requirement, and it plays an important role with this rapidly growing company. This is a very dynamic and fast-track position reporting to the Engineering Supervisor/Manager inside the service engineering group. The position will be the key member of the service engineering team and it is a highly technical customer facing position. Essential Duties and Responsibilities: • Perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing and maintenance of various solar inverters and battery storage technologies., • Perform as a lead on more complex field engineering assignments., • Interact with customers to explain the technical scope of projects., • Create and update field service procedures for troubleshooting and maintenance., • Provide training to Customers, Vendors, and Internal Personnel as a virtual team member of the training center., • Coordinate with R&D engineering in China for the generation of technical documents and training., • Responsible for the technical issues of a certain region based on the job assignment., • Lead the preparation of root cause reports to the customer., • Lead and track technical issues from customers/FST/PM/etc. on Airtable to visualize the process of the issues., • Analyze failures for trends requiring proactive actions and provide reports on findings., • Provide feedback to the R&D team on possible mechanical and electrical design improvements., • Advise, provide training on, and lead employees on various safety-related topics., • Perform electrical and electronic troubleshooting and testing of solar inverters and their components in the field or in the laboratory. Use of PQA and oscilloscope is required as needed., • Perform troubleshooting to investigate solar plant issues such as battery issues, inverter faults, inverter design issues, and utility grid transients., • Work with customer SCADA engineers to set up systems communication and parameters., • Research alternative components that can be used in the field., • Independently performs a range of field service tasks involving communication with Factory Engineering and Customer’s solar plant engineer., • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar/BESS plants., • Help with the repair activities in the Service center., • Prepare and submit field reports to customers and management., • Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work., • Conduct site visits, experimental investigations and analyze engineering problems. Propose solutions, alternatives, and provide recommendations., • Inspects working conditions to ensure all products and activities are compliant with safety guidelines., • Weekly call with Engineers from Headquarters to review the progress of the issues resolution process., • Provide details for a monthly report. Minimum Requirements: • Must possess the ability to work with test equipment and hand tools as required., • Must possess customer service, problem-solving skills, and possess decision making and analytical skills., • Must possess effective written and verbal communication skills., • Demonstrates broad knowledge of electrical and construction site safety., • Must be proficient in Microsoft Office Suite (Word, Excel, power Point and Outlook), • Must have basic knowledge of Electrical Safety Standards Education or Desired License and Certificates: • 4 years of experience in power electronics related companies as the service engineer/application engineer/R&D/Product Management or similar positions, or 2 years of experience with a Bachelor's degree or above, majoring in electrical engineering or similar majors., • Solar industry, battery industry, or power electronics experience is preferred. Competencies: • Technical problem solving/analytical skills., • Self-starter, strong initiatives, and an excellent communicator., • System and product level mindset., • Organization, detailed-oriented nature, and strong initiative., • Strong technical support focus and a service-oriented individual both with sales team and customers., • Modbus protocol knowledge is desired, but not required., • English language proficiency required., • Mandarin Chinese Proficiency desired, but not required. Travel: • 50% Work Location and Status: • Full-time role based in Philadelphia, PA, Newark, NJ, or Albany, NY areas Compensation: • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base salary for this role is between $80,000 - $120,000 This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow. #LI-LV1

Job Description Job Summary Construction Managers are Dennis Group’s project site supervisors that oversee the daily operations of the construction activities including coordination of sub-contractors, site safety programs, project schedule, and project budget. Our projects are designing and building food and beverage process facilities (industrial / MEP projects). This involves much coordination with multiple engineering groups and designers / architects. The construction manager is a skilled communicator, able to interact with all levels of personnel, coordinate and facilitate meetings with competence, and have strong technical skills in order to function proficiently with multiple types of software programs. The Construction Manager ensures the progression of the project in providing attention and coordination in both field and office construction management tasks. The role functions will include contract administration, project planning and scheduling, project reporting, and an advisory role to project management issues and activities. Typical responsibilities include but not limited to: Site Supervisory Responsibilities • Daily supervision of construction activities including coordination of subcontractors and site safety programs, • Works autonomously on overseeing medium-sized projects, • Working with project management on the developing and updating project scope, budget, and schedule, • Project accounting, budgeting, and cost management, • Other tasks as assigned, • Establishing and maintaining site safety procedures with our safety team, • Overseeing process, mechanical and utility equipment installations, • Permitting, code and regulatory administration and approval, • Change order and general construction administration, • Coordination of field engineering, • Inspection coordination, • Managing third party testing, inspection, and relationships, • Researching construction management best practices, • This role is client facing and you will need to work collaboratively with owners, subs, building officials, and our A/E team., • Preparing and administering third-party agreements, • Jobsite walk / audits to ensure project is progressing and sub-contractors are following plans per the schedule, • Procuring project services and equipment (rentals, PPE, etc.), • Managing project punch-list inspection, • Promoting continuous and productive communication between project participants including internal and external clients and partners, • Support and coordinate facility start up, • Preparing and maintaining project reports and logs, • Work with sub-contractors to ensure schedule compliance and determine alternatives resources or options, • Review and maintain submittals, RFIs, Change orders, • Work with Project Controllers and Project Manager in responsibilities involving supplier invoices and client billing, • Perform engineering calculations, • Preparing permit applications, • Assist in preparing work plans and work packages, • Assist in interpretation of drawings and specifications for field crews, • Coordinating project close-out activities, • Safety responsibilities in different varieties and capabilities, • Supporting talent growth within our organization, • A bachelors degree in construction science, building science, construction engineering or a related field is strongly preferred, • 4-7 years of Design-build experience over industrial projects (strongly preferred), • 4-7 years of overseeing sub-contractors and driving the project schedule, • 4-7 years of client interaction experience - strong technical, organizational, managerial, and communication skills, • 4-7 years of progressively responsible job site experience working on industrial building projects., • You have a fundamental understanding of all phases of construction and an ability to read and interpret construction documents, schedules, and budgets, • Proficiency with AutoCAD is a plus, • Meet Travel requirement – Up to 100% travel to projects throughout the USA and possible Canada, • Prolonged periods sitting at a desk and working on a computer and prolonged periods of standing and walking around project site with uneven surfaces., • Must be able to traverse and inspect all areas of jobsite in all types of weather; this may include walking, climbing, reaching, bending, crawling, or stretching., • Exposure to characteristic construction site dangers., • Must be on-call to address delays, emergencies, bad weather, and other issues at the jobsite. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job DescriptionElectrical Construction Coordinator - Transmission & Distribution - Eastern Pennsylvania Working with our business partners to create, improve and sustain industry and infrastructure. Orbital Engineering has been driven by this core purpose for more than 50 years - energizing Orbital team members and helping our clients solve challenging and complex problems with innovative engineering, inspection, and construction solutions. Orbital team members are guided by the fundamental beliefs of building trusted relationships, personal accountability, innovation, and excellence in everything we do. Orbital is looking for others to join our team to continue activating our purpose and embrace our values. Orbital is seeking an Electrical Construction Coordinator who possesses Electrical Transmission or Distribution experience to join the Electric Services Construction Coordinator Program based in Eastern Pennsylvania. We are primarily seeking candidates who reside in the greater Philadelphia area, or eastern Pennsylvania at a minimum. The role will entail planning and coordinating construction activities for a designated project to ensure the goals and objectives of the project are accomplished within the project schedule and budget constraints by performing the duties listed below. Each Coordinator is assigned to one specific project for an extended period of time. The assigned project area can be located anywhere within the client’s Electric Services territory. Projects are assigned to Coordinators based on geographical location, skill level, and experience. Responsibilities include but are not limited to: • At all times, provide safety oversight in an effort to ensure compliance with all safety procedures at site. Report safety compliance issues and safety incidents to client’s construction manager and Orbital supervisor. Work with construction supervision and on-site safety personnel to stop unsafe construction activities., • Prior to construction, participate in construction activity planning, pre-construction drawing reviews, and overall constructability reviews. Inspect construction site and complete pre-construction checklist tasks. Ensure necessary permits (local, state, environmental, etc.) and site/job specific plans (environmental, safety, etc.) are in place, signed, and posted at the job site., • During construction, inspect work to ensure that all safety and environmental policies are being followed and that the project is being constructed per the applicable specifications, drawings, and permits. Manage communication with construction crew(s), client project manager, and engineering to resolve all queries (Requests for Information or RFI’s) that may inhibit construction progress., • During construction, identify field-purchased material needs and communicate those needs to the client Construction Manager in writing. Order materials and rental equipment as necessary and coordinate deliveries. Inventory materials and identify shortages as the project progresses in order to prevent delays in schedule., • During construction, prepare Daily Log Reports that indicate progression of project to outline deficiencies in schedule, track completed construction activities, highlight safety incidents, and monitor compliance of work with specifications/drawings., • During construction, perform other miscellaneous duties including maintaining redline construction drawing markups, completing weekly safety audits, communicating scope changes, confirming utility locates, and signing crew timesheets., • HS Diploma or equivalent, • 5 Years Relevant Construction / Maintenance Experience, • Bachelor’s Degree in Construction Management or Similar, • Experience in Commercial / Industrial T&D or Experience in Management Preferred, • May have a background in structural, mechanical, or electrical (preferred) construction / engineering but must at a minimum be familiar with construction prints/drawings., • OSHA 10 hour and MEA specific training is beneficial, • Must exhibit strong written and verbal communication capabilities., • Must be competent in basic computer programs (Microsoft Office Suite and Adobe)., • Must be organized, self-motivated, and detail oriented., • Must be able to work well in a group setting and manage simultaneous tasks., • Must be willing to travel as needed. Travel and lodging costs are reimbursable., • Must possess a valid driver’s license and personal vehicle to frequent construction sites. Orbital Engineering, Inc. has provided worldwide professional engineering and consulting services since 1969. Our commitment to quality, responsiveness, and attention to detail has earned us the reputation as a leading provider of engineering and design services. A commitment to excellence and hard work will be rewarded with a competitive salary, career advancement opportunities, and an excellent benefits package including medical, dental, vision, prescription drug, 401(k), and supplemental insurance. Orbital Engineering, Inc. is an Equal Opportunity Employer, EEO/AA/M-F-V-D. Orbital Engineering, Inc. seeks diversity among its employees. Reasonable accommodations may be made to enable individuals to perform the essential job functions. CON00002059 #LI-CV1

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn, and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is currently seeking a Senior Project Engineer to join our Fuel Facility team. Location at a C&S office is preferred; however, a remote location is negotiable. Full-Time is Preferred; however, Part-Time is negotiable. The Senior Project Engineer is expected to have good relationships with clients and professionals in the fueling systems industry and will be responsible for generating project opportunities and managing fueling systems projects. In this role, the Senior Project Engineer will work with our multi-disciplinary design team to deliver projects in the aviation, automotive, and related fueling systems markets. Position Responsibilities • Develop effort budgets and schedules for prospective project pursuits., • Develop working relationships with existing and prospective clients and professionals., • Generate project opportunities., • Develop and optimize processes for improved efficiency, sustainability, and cost-effectiveness. Apply advanced problem-solving techniques and tools to enhance process design and operations., • Ensure all engineering projects comply with applicable codes, standards, and regulations. Maintain an up-to-date knowledge base of industry standards and government regulations., • Implement and oversee quality assurance protocols to maintain the quality of engineering outputs. Conduct reviews and audits of project deliverables to ensure technical accuracy and integrity., • Champion safety protocols and risk management practices throughout project lifecycles. Analyze potential risks and develop mitigation strategies to prevent accidents and operational failures., • Develop P&IDs for, but not limited to: Aviation Fueling Systems, Automotive Fueling Systems, Heating Oil Systems, and Emergency Generator Systems., • Communicate effectively with all stakeholders, including management, clients, regulatory bodies, and project teams, ensuring clear and consistent communication regarding project progress and issues., • Mentor less experienced engineers and support their professional development., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Minimum bachelor’s degree in mechanical, environmental, or industrial engineering or other similar degree., • Minimum 10 years’ experience working on flammable and combustible liquids fueling systems projects., • Professional Engineer (PE) license preferred or willing to pursue PE license., • Understanding of flammable and combustible liquids engineering principles, methodologies, and tools., • Ability to analyze complex engineering problems and develop effective solutions., • Comprehensive knowledge of relevant industry standards, safety regulations, and environmental laws., • Ability to write sequence of operation processes with P&IDs., • Excellent verbal and written communication skills, capable of effectively articulating technical information to non-technical stakeholders and writing detailed reports., • Efficient in; Bluebeam (or other PDF reader), Microsoft Word, Microsoft Excel, and Microsoft Outlook. $120,000 - $140,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description POSITION SUMMARY: The MEP department is seeking a Senior Electrical Engineer with 8+ years of relevant experience in electrical power, lighting and fire alarm/systems design for educational, commercial and industrial facilities to expand its growing MEP division. PRIMARY DUTIES: • Prepare electrical design for large scale projects-industrial, institutional, office, retail, healthcare and other, • Apply design knowledge in power distribution, grounding, lighting, control systems, and equipment specifications and selections, • Analyze complex engineering problems and offer effective resolutions, • Ability to direct a team of designers and support personnel, • Interact with all engineering disciplines, construction project managers, and clients, • Lead an electrical design group on large scale projects, • Work within company policy and OSHA Safety rules, • Must have advanced knowledge of electrical engineering and design and be familiar with applicable codes for building, energy, and construction standards and acceptable industry practices, • Must be able to travel up to 10% of the time, • 10+ years of formal experience in electrical system design for buildings, • Experience with Engineering Design software including SKM, • Experience with Lighting Design and Photometric Software, • Experience with latest versions of AutoCAD, • Must have experience as a project lead on complex, multi-discipline engineering design projects., • Strong verbal and written communication skills required with the ability to prepare written specifications, letters, reports and related contract documents. EDUCATION/EXPERIENCE: • Must possess Bachelor or Master's degree in electrical engineering CERTIFICATIONS/LICENSES REQUIRED • PE License Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing

Job Description We are a family business with 30 years experience and are looking for a traveling foreman with extensive experience managing crews in complex and varied job sites. We offer 401K and Health coverage. Our main business is to dismantle commercial/industrial installation Including: -Dismantling Data Centers: server racks, raised floor, ATS, UPS, generator, HVAC, fire suppression. -Dismantling laboratory installation: lab casework, fumehoods, plumbing,.., • Various commercial/industrial electrical installations. Please note: 1. This role requires extensive travel within the continental US., 2. You must have experience with industrial facilities construction or dismantling., 3. Bilingual English/Spanish is a must. If you meet all 3 of these requirements, please apply and thank you. Responsibilities include • Oversee and manage projects from start to finish (mainly dismantling of Data Center, industrial electrical and Laboratory facilities, see above for more details), • Coordinate and schedule work activities for the construction crew, • Read and interpret blueprints, schematics, and construction plans, • Ensure compliance with building codes, regulations, and safety standards, • Conduct quality control inspections to ensure work meets specifications, • Monitor project progress and make adjustments as necessary, • Collaborate with contractors, subcontractors, and suppliers, • Provide guidance and training to construction crew members, • Resolve any issues or conflicts that arise during the construction process Requirements: • Proven experience as a Supervisor or Supervisor in the construction industry, • Ability to travel extensively, although our job sites tend to be located on the East coast, we serve the entire continental US., • Strong knowledge of construction techniques, materials, and equipment, • Proficient in reading and interpreting blueprints, schematics, and construction plans, • Excellent leadership and communication skills, • Ability to effectively manage a team and prioritize tasks, • Detail-oriented with strong problem-solving abilities, • Knowledge of construction estimating and cost control, • Familiarity with building codes, regulations, and safety standards This is an exciting opportunity for an experienced Supervisor/Supervisor to join our team. If you have a passion for construction and possess the necessary skills and qualifications, we would love to hear from you.

Job Description Description The Facilities Maintenance Technology Instructor delivers hands-on and classroom instruction to adult learners in the Facilities Maintenance Technology program. The instructor ensures that students gain the technical, safety, and job readiness skills required for entry-level employment in building and facility maintenance. Instruction covers multiple trade areas, including carpentry, plumbing, electrical, HVAC fundamentals, interior/exterior repair, safety/OSHA standards, and customer service. The instructor assists in updating current curriculum; providing quality instruction for a diverse student population; and performing instructional duties and responsibilities in accordance with the philosophy, mission, core values, policies and procedures of the College. Examples of Duties Essential Duties and Responsibilities: • Provide engaging, competency-based instruction aligned with the Facilities Maintenance Technology curriculum., • Teach theory, applied skills, and safety practices in classroom, lab, and/or shop environments., • Deliver instruction in areas such as OSHA/safety, math and measurement, blueprint reading, carpentry, plumbing, electrical systems, HVAC basics, interior/exterior repair, painting/finishing, and forklift safety., • Demonstrate, supervise, and assess students in hands-on skill development., • Ensure compliance with OSHA and industry-standard safety procedures at all times., • Monitor student attendance, performance, and progress; provide academic support as needed., • Assess student competency through tests, projects, demonstrations, and practical evaluations., • Maintain instructional materials, tools, and supplies; request replacements when needed., • Collaborate with WEDC staff and Esperanza staff to ensure program success and student outcomes., • Maintain accurate course records, grading, and reporting per College requirements. Other Duties and Responsibilities: • Perform related duties as assigned by supervisor, • Maintain compliance with all company policies and procedures Typical Qualifications Required Knowledge, Skills, and/or Abilities: • Broad working knowledge of facility maintenance skills, including carpentry, plumbing, electrical systems, HVAC fundamentals, safety, and repair practices., • Strong instructional and communication skills; ability to explain and demonstrate concepts to diverse learners., • Commitment to workplace safety and OSHA compliance., • Ability to manage classroom and shop environments effectively., • Strong organizational and time-management skills., • 3 years’ experience in construction trades, building maintenance, HVAC, electrical, or related field;, • A college degree is NOT required, • Current job specific credentials or certification preferred Supplemental Information Work Environment and/or Physical Demands: • Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards., • Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards, • Conditions may require walking, stooping, climbing, pushing, pulling, heavy lifting (less than or equal to 50 pounds), high climbing, bending, working in awkward positions handling equipment and materials., • Must be able to lift and carry up to 50 lbs, • Must be able to talk, listen and speak clearly on telephone, • The noise level in the work environment is usually low to moderate.Company DescriptionThaddeus Stevens College of Technology is an acclaimed residential two-year college accepting students from throughout the state of Pennsylvania as well as veterans, members of the armed forces, and their families. As an accredited technical college, we are dedicated to preparing students for high-demand careers with family-thriving wages. Founded as Stevens Trade School in 1905, the school was initially a public institution for orphans of the state who learned a trade combined with academic education. It was begun based on a bequest in the will of Thaddeus Stevens, a statesman who dedicated his life to creating access to education and equity among those who faced injustice. Today, Thaddeus Stevens College of Technology offers two-year associate degrees in 24 programs to more than 1,400 students. In addition, the college offers four nine-month certificate programs. At its Workforce and Economic Development Center, the College features several short-term trainings in partnership with Tec Centro, along with continuing education and professional development options.Thaddeus Stevens College of Technology is an acclaimed residential two-year college accepting students from throughout the state of Pennsylvania as well as veterans, members of the armed forces, and their families. As an accredited technical college, we are dedicated to preparing students for high-demand careers with family-thriving wages.\r\n\r\nFounded as Stevens Trade School in 1905, the school was initially a public institution for orphans of the state who learned a trade combined with academic education. It was begun based on a bequest in the will of Thaddeus Stevens, a statesman who dedicated his life to creating access to education and equity among those who faced injustice.\r\n\r\nToday, Thaddeus Stevens College of Technology offers two-year associate degrees in 24 programs to more than 1,400 students. In addition, the college offers four nine-month certificate programs. At its Workforce and Economic Development Center, the College features several short-term trainings in partnership with Tec Centro, along with continuing education and professional development options.

Job Description Job Title: Warehouse Supervisor Job Description We are seeking a dedicated Warehouse Supervisor to oversee daily operations in a dynamic warehouse setting. This is a temporary 3-month assignment with the possibility of extension, tasked with managing warehouse operations while ensuring compliance with safety and quality standards. The work schedule is Monday to Friday, 10:00 AM – 7:00 PM Responsibilities • Manage and oversee 4–5 Union Warehouse Operators during the shift., • Route and schedule company-owned trucks using internal software., • Ensure orders are picked accurately, follow FIFO, and trucks are loaded correctly., • Pick orders for trucks as needed and support the 1st Shift Supervisor if trucks arrive late., • Serve as a liaison between Customer Service and customers to ensure timely order processing., • Utilize warehouse and routing software systems, with SAP and D Track experience as strong pluses., • Monitor warehouse operations to ensure productivity, safety, and quality., • Ensure proper stock rotation and organization in the warehouse., • Ensure Finished Goods are shipped according to FEFO order and quality standards., • Complete all warehouse documentation accurately and maintain up-to-date SAP transactions., • Communicate operational, inventory, safety, and quality issues to Management and other departments., • Enforce adherence to company policies and procedures by colleagues and outside contractors., • Generate and participate in accident reports and investigations., • Provide job training for employees and maintain training records., • Evaluate capex requirements with management to enhance warehouse performance., • Ensure receiving, picking, and shipping are done efficiently and safely., • Provide hands-on supervision to motivate workers and seek process improvements., • Anticipate issues that may impact warehouse performance and address them effectively., • 3 years experience in a distribution & logistics supervisory role., • Experience in a fast-paced environment., • Ability to manage 4-5 associates., • Strong communication skills for staff and customer service., • Supervisory skills in a warehouse environment., • Proficient in supply chain and warehouse inventory management., • Strong computer and software literacy., • Prior experience with SAP and/or D Track is a plus., • Experience operating a rider is helpful but not required., • Comfort leading in a fast-paced, high-volume environment., • Extensive practical knowledge in warehouse, safety, and HACCP standards. Join a growing company that values its employees and promotes tenure and growth. Experience a supportive work environment that encourages professional development and recognizes individual contributions. Work Environment This position operates within a brand new, food manufacturing environment that complies with all CGMP and HAACP guidelines. The work schedule is Monday to Friday, 10:00 AM – 7:00 PM, with flexibility for overtime as needed. The role requires approximately 50% on the floor and 50% in shared office space. Steel toe work boots are required. Job Type & Location This is a Contract position based out of Pennsauken, NJ. Pay and Benefits The pay range for this position is $32.00 - $32.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Pennsauken,NJ. Application Deadline This position is anticipated to close on Mar 18, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Direct Hire opportunity for a Industrial Maintenance Technician in Philadelphia, PA We're hiring an Industrial Maintenance Technician for a Food processing facility in Philadelphia, PA What We Offer: • Pay: $27-37.90 /hr (based on experience), • Comprehensive benefits (medical, dental, vision, 401(k), PTO, tuition reimbursement, and more), • 1st shift 5am-5:30pm rotating 2-2-3, • 3rd shift 5pm-5:30am rotating 2-2-3 As a Maintenance Technician, you will be responsible for repairing machines and providing support regarding the usage of machines and electrical components. You will report to the Maintenance Supervisor and ensure the smooth operation of high-speed packaging equipment and other mechanical and electrical systems. Responsibilities • Install, maintain, and perform repairs on high-speed packaging equipment, mechanical components such as valves and piping, and electrical components such as transformers, circuit breakers, AC and DC motors, variable frequency drives, sensors, PLCs, and HMIs., • Respond to and correct breakdowns promptly and communicate effectively with operators to assist in diagnosis and prevent future issues., • Perform daily, weekly, monthly, and semi-annual maintenance work including regular preventive maintenance on high-speed packaging equipment., • Develop knowledge and familiarity with mechanical and electrical drawings for equipment and plant infrastructure., • Assist in set-ups, changeovers, and start-up adjustments of equipment as necessary., • Maintain cleanliness of the work area., • Work with minimal to no guidance and be self-sufficient., • Work shifts including weekends and holidays., • Proficient with basic hand/power tools, measuring devices, and electrical testing., • Experience in hydraulics, pneumatics, preventive maintenance, mechanical troubleshooting, and diagnosis., • Ability to read blueprints and schematics., • High school diploma or equivalent and technical school is required., • Associates degree in Electronics/Electrical Technology and/or three or more years’ experience in a hands-on technical role is preferred., • Knowledge of mechanics, pneumatics, hydraulics, electricity, and industrial refrigeration is preferred., • Basic fabrication skills such as welding, cutting, grinding, and machine work is a plus., • Experience in HVAC, welding, electronics, electrical repairs, and industrial equipment installations is a plus., • Proficiency with computers and software including Microsoft Windows, Word, and Excel. Enjoy a competitive benefits package including a 401k with a 5% match and comprehensive health, vision, and dental coverage with Cigna. Work Environment Work within a food manufacturing facility GMP experience preferred Job Type & Location This is a Permanent position based out of Philadelphia, PA. Pay and Benefits The pay range for this position is $57720.00 - $82860.00/yr. all employees are eligible for a 401k match of 100% on up to 5% of eligible pay. To support growing families, we provide fertility and childcare assistance, and 12 weeks of parental leave at full pay after six months of continuous employment. In addition, we provide wellness resources which include an employee assistance program, fitness discounts, a wellness reimbursement, on-site gym access (certain locations) and a monthly wellness newsletter to connect you with resources and timely information. We offer various types of paid and flexible time off based on start date and tenure and 11 holidays each year. Workplace Type This is a fully onsite position in Philadelphia,PA. Application Deadline This position is anticipated to close on Mar 20, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: KSE is a mid-size construction management and engineering firm ranking in the ENR Top 100 for CM and ENR Top 500 for design services. With seven offices across four states (NY, NJ, PA and CT), the firm has been providing transportation and public infrastructure construction services for more than three and half decades. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KSE is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Senior Civil Highway Engineer/Department Manager Responsibilities: • Lead and/or conduct Civil Engineering design tasks including geometrics, profiles/grading, drainage/storm water management, soil erosion and sediment control, traffic signs and markings, maintenance, and protection of traffic., • Prepare technical specifications, quantity and cost estimates, design, and construction schedules., • Prepare design study reports and deliverables., • Coordinate and deal directly with clients., • Periodically organize and lead fieldwork effort with internal staff teams., • Assist in developing design scope of work and associated fee estimates, and other business development efforts., • Provide mentorship to Junior staff., • Keeps current with design criteria and technology., • Bachelor of Science in Civil Engineering (BSCE) required; master’s degree preferred., • Professional Engineer (PE) license in both New York and/or New Jersey required., • 8-12 years of progressive experience in civil design for highway/roadway and site improvements including the use of CADD and related computer design software., • Base salary is $120,000 to $140,000 per year., • Strong verbal and written skills are required. Is a proactive self-starter., • Provides technical support., • Can accomplish assigned tasks independently with guidance from their supervisor.

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: Philadelphia, PA Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Job Description Job Title: Maintenance Technician/General Maintenance Department: Maintenance Location: Philadelphia, PA Reports To: Property Manager/Maintenance Supervisor Hours: Monday - Friday 8:00am - 5:00pm Compensation: $22 - $30 Hourly + Benefits (based on experience and certifications) SUMMARY • Perform minor building, HVAC, plumbing, electrical and painting repairs as necessary, • Implement preventative maintenance measures, • Maintain inventory of repair equipment and supplies, • Complete inspections of buildings, units, office and amenity space as needed, • Respond quickly in the event of an emergency, notify appropriate personnel and follow safety protocol ESSENTIAL DUTIES AND RESPONSIBILITIES includes but is not limited to the following: Report directly to Maintenance Supervisor (if available - on staff) otherwise to Property Manager/Assistant Property Manager. This position is responsible for the maintenance and repair of mechanical equipment and building repair in a multifamily housing environment. - Ability to work with and repair drywall and paint drywall surfaces. • Perform basic maintenance tasks and general repairs including plumbing, roofing, appliance moving and repair., • Maintain common areas and grounds of the property., • Must be able to access and inspect property grounds by way of climbing ladders, stairwells, rooftops, confined areas, etc., • Perform troubleshooting, repairs and preventative maintenance, renovating and preparing vacant units to move in condition, outdoor grounds maintenance and property appearance., • Candidates must possess basic hand tools, valid drivers license and have their own transportation., • Maintains building, performing routine painting, plumbing, electrical wiring, and other related maintenance activities as needed. QUALIFICATIONS AND PREFERRED SKILLS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Must have good communication skills. Must have basic knowledge of construction and repair processes. Must have a valid driver’s license, own transportation and tools. • High school diploma/GED required, • Physical strength and dexterity to lift, move and handle equipment., • General maintenance knowledge and construction skills., • Ability to comprehend instructions furnished in written, oral, or diagram form., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedural manuals., • Exhibits behaviors of honesty, commitment to goal achievement and effective relationships with colleagues, • Self-starter with the ability to quickly adapt to new circumstances as they arise, • Ability to prioritize tasks and follow specified procedures EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or at least six months related experience and/or training; or equivalent combination of education and experience. CERTIFICATIONS: Must have a valid drivers license & own vehicle. Clean background required. LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to speak effectively after groups of customers or employees of organization. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems and find solutions within company protocol. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Heavy lifting is required. While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to climb or balance; stoop, kneel, crouch, or crawl; and taste or smell. Must be physically capable of lifting a minimum of 50 pounds unassisted. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Full Time Employment Benefits: Capano Residential offers competitive compensation and benefit package which includes: medical, dental, vision, life insurance, and disability benefits. Medical, Dental & Vision 401k Match Life Insurance Paid Time Off (Vacation/Personal/Sick Time) • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Vision insurance Ability to commute/relocate: • Philadelphia, PA : Reliably commute or planning to relocate after starting work (Required) Experience: • Maintenance: 1 year (Preferred), • Mechanical knowledge: 1 year (Preferred) License/Certification: • Driver's License (Required) Work Location: In person

Job Description POSITION SUMMARY: The MEP department is seeking an Electrical Engineer with 8+ years of relevant experience in electrical power, lighting and fire alarm/systems design for educational, commercial and industrial facilities to expand its growing MEP division. PRIMARY DUTIES: • Prepare electrical design for large scale projects-industrial, institutional, office, retail, healthcare and other, • Apply design knowledge in power distribution, grounding, lighting, control systems, and equipment specifications and selections, • Analyze complex engineering problems and offer effective resolutions, • Ability to direct a team of designers and support personnel, • Interact with all engineering disciplines, construction project managers, and clients, • Lead an electrical design group on large scale projects, • Work within company policy and OSHA Safety rules, • Must have advanced knowledge of electrical engineering and design and be familiar with applicable codes for building, energy, and construction standards and acceptable industry practices, • Must be able to travel up to 10% of the time, • 10+ years of formal experience in electrical system design for buildings, • Experience with Engineering Design software including SKM, • Experience with Lighting Design and Photometric Software, • Experience with latest versions of AutoCAD, • Must have experience as a project lead on complex, multi-discipline engineering design projects., • Strong verbal and written communication skills required with the ability to prepare written specifications, letters, reports and related contract documents. EDUCATION/EXPERIENCE: • Must possess Bachelor or Master’s degree in electrical engineering CERTIFICATIONS/LICENSES REQUIRED • PE License Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required. • Ensure that all Hanwha Philly Shipyard safety procedures, rules and regulations are followed and met, • Create, check, and/or review Purchase Technical Specifications for assigned equipment and systems. Provide feedback to design partner if applicable, • Review and approve basic and detail design (functional design) drawings, arrangements, diagrams, and calculations for accuracy against contract specifications, rules and regulations, and general check for mistakes and consistency. Identify potential installation or operational issues. Provide feedback to design partner for revision, • Review maker (vendor) furnished drawings and manuals. Check for accuracy against specifications, rules and regulations, missing/inaccurate scope of supply or information, potential installation or operational issues. Provide feedback to the maker for revision, • Participate in basic and detailed design activities within the Electrical Design Department, which includes, but is not limited to, the detailed review of design to confirm the design is complete, accurate and complies with manufacture requirements, shipyard electrical design standards, vessel contract specifications as well as Class, USCG and other regulatory body rules and regulations, • Process approved engineering documents using standard Documentation Control System (DCS) to register documents and maintain the database as required, • Provide field-engineering support as required to support production activities by troubleshooting production concerns that arise during vessel construction, • Provide feedback to Electrical Basic and Electrical Outfitting Designers based on issues encountered in the field including installation difficulties, missing material / equipment, hardware requirements, testing requirements, and technical specifications, • Provide field corrections and repair instructions for electrical outfitting items. Assist Electrical Outfitting Designers with developing Design Change Notice (DCN) documentation, • Maintain working knowledge and monitor development of classification and regulatory rules and requirements pertaining to electrical design of all shipboard electrical systems, • Provide technical support to test engineers during vessel testing and commissioning, • Travel domestically and internationally to coordinate efforts of design partners and vendors in order to facilitate progress of basic and detailed design, and resolve outstanding design issues, • Perform other related duties as required and assigned, • Address and resolve all system-related issues. COMPETENCIES • Communication skills, both verbal and written, • Decision making/problem solving, • Organizational understanding, • Integrity, • Conflict resolution, • Strategic thinking, • Stress Management, • Willingness and ability to work as a team leader (System Unit Leader) SUPERVISOR RESPONSIBILTY This position has no supervisory responsibilities. EDUCATION AND EXPEREIENCE • Bachelor's Degree in Electrical Engineering is preferred; however, candidates with a technical diploma and 10+ years’ experience in ship’s and/or construction may also be considered, • Minimum 10 years’ experience in shipbuilding, system design system (should have experience in power or control systems), • Experience with electrical system or electrical design and construction Proficiency with MS Office and CAD systems such as AutoCAD, • Knowledge/experience concerning basic and detail ship design, • Knowledge/experience concerning modern shipbuilding practices, • Experience with Classification Society Rules for New Construction, IMO Regulations, and US Coast Guard Requirements as well as International experience or familiarity with European and/or Asian Shipbuilding Standards WORK ENVIRONMENT Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions. **Hanwha Philly Shipyard is a TOBACCO FREE facility. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Since the job functions require the individual to enter the production areas, they should have a range of motion sufficient to perform occasional bending, stooping, climbing, standing, etc. Employment in this position is contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.

Job Description Ranked the #4 Large Employer to Work for in America and residing in the Top 400 on Engineering News Record (ENR)'s List of Top Design Firms in the nation, TPD is currently hiring dynamic Construction Inspector Supervisors and Managers at all levels. Our ideal candidate has minimum of 5 years of experience, a strong work ethic, a desire to learn, the willingness to work cohesively within a team, and the ability to work on multiple projects. Additionally, we offer a creative, flexible, supportive, and fun environment! Duties and Responsibilities include, but are not limited to: • Provide daily inspection of construction work within a given discipline to ensure the project complies with plans and specifications. Such as Roadway Inspection of earthwork, drainage, paving, etc.; Structural inspection of foundations, piles, concrete, deck formwork, MSE walls, sign structures, etc.; ADA Compliance Inspection of curb ramps and sidewalks, etc.; Traffic Signal Inspections., • Supervise Inspection Teams, • Approve all on-site observations of construction progress, equipment, manpower, and materials on a Daily Inspection Report and various other reports required., • Measure and record quantities for payment, • Prepare as-built drawings, • Serving as on-site project representative. Job Requirements • Bachelor’s Degree in Civil Engineering (not required), • At least one or more of the following certifications are preferred: ACI, NECEPT or PennDOT concrete, • NICET Certification: II-IV is preferred., • Excellent oral and written communication skills, • Strong work ethic and ability to work on multiple projects and ability to meet multiple deadlines, • Knowledge of Microsoft Office Suite, • Valid Driver’s License Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public, and are dedicated to Moving Forward Together®

Job Description Job Description: The Maintenance Supervisor is highly skilled in Facilities Management and Operations. As a Leader and mentor for the community the Maintenance Supervisor is a reliable, trustworthy professional responsible for the overall Maintenance and operations of the community. This involves ensuring a safe and secure living environment for Residents, Visitors and Associates. The Maintenance Supervisor will continually improve operating conditions, quality, and integrity of all building systems and appearances, while delivering superior customer service to our Residents. They are tasked with improving and standardizing quality of services and products used in the maintenance of properties. The Maintenance Supervisor will work closely with the Property Manager to ensure excellent customer service to Residents and all maintenance issues are resolved within established guidelines. Reports to: Property Manager Supervises: Supervises entire on-site maintenance staff including but not limited to, Maintenance Technician(s), Groundskeeper(s), Porters(s), and Housekeeper(s). Wage Status: Exempt (Ineligible for overtime) Job Responsibilities: • Effectively leads, manages, trains Associates. Assigns work orders and provides technical assistance to maintenance associates., • Assists in the selection of maintenance associates. Provides feedback for performance reviews and recommendations for training., • Participates in on-call emergency rotation and responds to emergencies as needed., • Leads property inspections and vendors including; building and alarm systems inspections and preparing the property for any outside inspections., • Inspects vacant units, ensuring turnovers are completed within a timely manner., • Reviews work order logs and sets priorities for work order completion., • Establishes and implements auditing procedures for maintenance inventory. Monitors inventory levels while remaining within established budgets., • Reviews contracts and makes recommendations for approvals., • Manages subcontracted service providers and documents work and product quality., • Facilitates technical training and technical skill development for property associates., • Remains aware of the condition of physical property throughout the community and immediately correct any unsafe conditions; e.g., broken gates leading to the pool, broken steps, open holes, broken/burned out exterior lights., • Maintains accurate records regarding preventive maintenance, work orders (received and completed), expenditures, apartment make-ready status, work-in-progress, etc., • Reviews and makes recommendations to revise routine and preventative maintenance schedules Schedule and perform minor and routine maintenance on all appropriate equipment on a regular basis., • Associates must meet or exceed the performance standards of this position and comply with policies, rules and procedures of the company, including those set out in the Associates Handbook or otherwise communicated (verbally or writing) to Associates., • Inspects others work orders in vacant units, ensuring turnovers are completed on schedule and meets or exceeds community standards., • Utilizes maintenance program to track work orders, preventive maintenance, inventory, product replacement histories., • Conduct grounds inspections:, • Trash pick-up, sweeping and light landscaping. Removes snow and ice from sidewalks, walkways, steps, and driveways. Diligently monitors the community for slip, trip and fall hazards., • Coordinate special projects as directed. Including assisting during the event, setting up, monitoring, moving furniture, equipment and breakdown., • Conducts all business with integrity in accordance with company policies and procedures, local, state and federal laws; OSHA, ADA, Fair Housing, etc., • Maintains and communicates HAZCOM standards. Keeps MSDS sheets current and readily accessible. Maintains thorough knowledge of pertinent laws and EPA and OSHA regulations governing property storage and management of hazardous materials, including solvents, flammables, caustics and refrigerants., • Inspects and maintains all tools in excellent condition and ensure an adequate inventory of spare parts and maintenance materials., • Instills a "safety first" attitude not only with maintenance staff but with all employees. Requirements: • Collegiate degree or equivalent Trade School Degree in HVAC, electrical, plumbing or another trade., • HVAC Certification preferred., • 10 years maintenance, construction or Project Management experience., • Minimum 5 years’ experience in a managerial roll., • Advanced knowledge in all building and maintenance systems, including inventory control, preventative maintenance, and work order record keeping., • Advanced knowledge in mechanical systems and equipment including HVAC, plumbing, carpentry, painting, electric and Life Safety systems., • Proficiency in building practices and standards., • Attendance and reliability is an imperative job function., • Meets all physical requirements to perform all job functions and responsibilities., • Valid Driver's License and reliable transportation required., • Ability to perform heavy lifting (at least 60 lbs), climb ladders up to 24 ft, stand and walk for 8 hours, and perform other physically demanding duties as directed., • Ability to communicate clearly and effectively with customers, colleagues and supervisors in spoken and written English to ensure successful completion of job duties. Post Brothers provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Post Brothers complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Urban Engineers is seeking qualified individuals in Pennsylvania, including Philadelphia, Pittsburgh, Erie, Allentown, Scranton, Mechanicsburg/Harrisburg, State College, Altoona, and Williamsport to join the Construction Management Department as Transportation Construction Inspector Supervisors (TCI

Urban Engineers is seeking qualified individuals in Pennsylvania, including Philadelphia, Pittsburgh, Erie, Allentown, Scranton, Mechanicsburg/Harrisburg, State College, Altoona, and Williamsport to join the Construction Management Department as Transportation Construction Inspector Supervisors (TCI

Here at BrightView, we're as passionate about caring for our clients as we are about caring for each other. BrightView is an Equal Employment Opportunity and E-Verify Employer. BrightView offers a suite of health, wellness, and financial benefits to full-time team members.

Urban Engineers is seeking qualified individuals in Pennsylvania, including Philadelphia, Pittsburgh, Erie, Allentown, Scranton, Mechanicsburg/Harrisburg, State College, Altoona, and Williamsport to join the Construction Management Department as Transportation Construction Inspector Supervisors (TCI

Construction Inspector Supervisor/Manager. Ranked the #4 Large Employer to Work for in America and residing in the Top 400 on Engineering News Record (ENR)'s List of Top Design Firms in the nation, TPD is currently hiring dynamic Construction Inspector Supervisors and Managers at all levels. Provide

Description: Position Summary: The Respiratory Support Technician provides comprehensive direct and indirect patient care services across home, office, and hospital environments in accordance with all governmental, accrediting, and organizational policies and procedures. This role ensures patients receive appropriate goods and services in the most efficient and satisfactory manner possible while serving as a subject matter expert, conducting new hire training, and mentoring team members. The lead specialist serves as a subject matter expert, conducts new hire training and mentor to the team. Essential Functions and Job Responsibilities: Patient Care & Service Delivery Collaborate with Respiratory Department Staff, CPAP/BIPAP Program Managers, and Operations Managers to provide equipment instruction, service, and troubleshooting for respiratory patients Set up and fit PAP patients with appropriate equipment and masks Conduct patient follow-up calls and visits to ensure optimal care outcomes Communicate instructions and processes to patients in a professional, informative, and appropriate manner Contact clinical support when urgent patient needs are identified during home visits Equipment Management & Maintenance Perform routine preventative maintenance checks and simple repairs per company policy and manufacturer guidelines Troubleshoot equipment failures with patience and professionalism Report equipment hazards and product incidents in accordance with company policies and procedures Maintain working knowledge of current Respiratory Programs and HME products and services Documentation & Compliance Complete all required company, insurance, and government paperwork accurately and timely, including: Delivery tickets and safety checklist forms Patient booklet receipts, ABNs, and AMAs Equipment-specific instruction and cleaning forms Develop and maintain basic reimbursement knowledge to ensure proper documentation for billing purposes Maintain patient confidentiality and operate within HIPAA guidelines Complete assigned compliance training and educational programs Maintain compliance with AdaptHealth's Compliance Program Safety & Quality Assurance Adhere to procedures for Personal Protective Equipment (PPE), infection control, and hazardous materials handling Assist with implementation of quality improvement programs to meet company standards Promote services and products to community referral sources as appropriate Lead, Respiratory Support Technician - All Level 1 and 2 duties plus: Serves as subject matter expert and primary resource for team Conducts new hire training and mentors team members Handles escalated calls and complex issues with appropriate follow-up Identifies root causes of service issues and collaborates on process improvements Prepares reports for leadership and other departments Supports departmental standards and Patient Experience initiatives Assists with task coordination and ensures adherence to workflows Collaborate with supervisor on performance metrics and service excellence Assist with implementation of quality improvement programs to meet company policies. Maintain patient confidentiality and function within the guidelines of HIPAA. Completes assigned compliance training and other educational programs as required. Maintains compliant with AdaptHealth’s Compliance Program. Perform other related duties as assigned. Competency, Skills, and Abilities: Equipment repair or maintenance skills Proficiency with computer systems and database applications Understanding of basic medical terminology Knowledge of insurance verification processes Strong attention to detail and organizational skills Ability to work under time constraints and manage multiple priorities Written and verbal communication skills Professional demeanor in patient and staff interactions Commitment to confidentiality and data security protocols Requirements: Education and Experience Requirements: High school diploma or equivalent required Work-related construction, general manual labor, military and equipment repair, or maintenance skills would be considered related experience Exact job experience is considered any of the above tasks in a Medicare certified HME environment that routinely bills insurance. Knowledge of respiratory therapy or DME services preferred. Valid and unrestricted driver’s license from state of residence Specialist Level: (Entry Level): One (1) year of work-related experience Senior Level: One (1) year of work-related experience plus Two (2) years exact job experience Lead Level: One (1) year of work-related experience plus Four (4) years exact job experience Physical Demands and Work Environment: Ability to perform repetitive motions of wrists, hands and/or fingers due to extensive computer use. Work environment may be stressful at times, as overall office activities and work levels fluctuate. Subject to long periods of sitting and exposure to computer screen. May be exposed to hazardous materials, loud noise, extreme heat/cold, direct, or indirect contact with airborne, bloodborne, and/or other potentially infectious pathogen May be exposed to angry or irate customers, patients, or referral sources. Ability to utilize a personal computer and other office equipment. Assist in pulling a patient with a weight of approximately 130 pounds to a sitting position. Must be able to lift 50 pounds as needed. Mental alertness to perform the essential functions of position. May be exposed to angry or irate customers or patients Ability to work outside of normal business hours. Requires travel throughout service area and use of personal vehicles Ability to effectively communicate both verbally and written with internal and external customers with the ability to demonstrate empathy, compassion, courtesy, and respect for privacy. Must be able to access the patient’s residence as needed. Ability to work independently with minimal supervision and availability for extended hours when required. PIcd5065c9632b-37820-39651634aa415a4b-8b21-40fc-a65c-70d2b25ca29a

Job Description The responsibilities are to carry out general maintenance tasks as assigned and perform as a maintenance and construction technician on in-house and outside construction projects as directed, and in the best interests of VOADV Property. SCOPE OF DUTIES: • Perform maintenance inspections, repair work, and perform construction project work as needed., • Keep an accurate record of work completed, including time and materials, and work independently., • Report all unsafe or potentially hazardous conditions immediately to the Construction & Maintenance Director., • Attend and participate in job meetings and training sessions as required., • Pick up and deliver necessary materials and supplies as needed or requested by the Construction and Maintenance Foreman., • Keep an accurate record of the petty cash account., • Responsible for the care and safekeeping of all department tools and equipment., • Be available for on-call emergency service as assigned., • Perform as crew leader when necessary and as assigned by the director, supervisor., • Maintain client and staff confidentiality in compliance with administrative policies and procedures., • Attend and participate in regularly scheduled staff meetings, supervisory conferences, and training sessions., • Interact with all clients, staff, and outside contacts with respect and courtesy. ADA ESSENTIAL FUNCTIONS: • Ability to climb stairs, and work from ladder while using or carrying tools., • Ability to lift a least 50 pounds several times during and 8-hour period., • Ability to see clearly all types of plans, gauges, rulers and drive a light truck., • Ability to operate power and non-power hand tools.

Job Description Job Title: Gas Leak Survey Tech Location: Philadelphia, PA Type of Role: Full-time ABOUT VECTOR: We are a Service-Disabled Veteran Owned Business (SDVOB) and are dedicated to connecting diverse talent with meaningful career opportunities across the United States. We have teamed up with an industry-leading energy infrastructure solutions provider offering engineering, construction and maintenance services to the oil and natural gas, electric transmission and distribution, telecommunications and wastewater industries. THIS POSITION: We are currently hiring Gas Leak Survey Technicians. The Survey Techs will be responsible for detecting, locating, evaluating gas leaks and entering data into the company provided hand-held devices. The person in this position will be out in the field walking for the most of their workday in all weather conditions. This position will report directly to the Field Supervisor and is in the suburbs of Philadelphia, PA area. A car stipend and gas card will also be provided. RESPONSIBILITIES: • Accurately detect and classify gas leaks during inspections in designated areas., • Locate and accurately assess the origin of damage and gas leaks., • Accurately enters data into handheld devices to be submitted to field office., • Reports identified gas leaks to gas company in a timely manner., • Daily check-ins and communication with Field Supervisor and office staff., • Provides customer with safety recommendations and information pertaining to any leaks found., • Follows the specifications of the project(s) to ensure completion., • Interprets and follows federal, state, local, and company laws, rules, and regulations., • High school diploma or GED certificate, • Valid driver’s license and reliable transportation, • Knowledge and understanding of safe worksite practices., • Ability to accurately detect and class gas leaks., • Ability to work independently with minimal supervision., • Ability to work within and utilize existing utility standard designs., • Ability to work outside in all weather conditions year-round., • Ability to walk up to several miles a day with consistent bending, crouching, and kneeling while carrying 20lbs of equipment., • Strong communication and interpersonal skills to be able to work with citizens, company, contractor representatives, and customers., • Experience using basic communication and tech devices., • TOP INDUSTRY PAY, regular wage increases, and overtime opportunities., • Paid on-the-job technical and professional training., • Competitive wages and industry-leading benefits including Retirement Plan. Equal Opportunity Employer: Vector Talent Solutions is an equal opportunity employer. We welcome and encourage applications from candidates of all backgrounds and experiences. Reasonable Accommodation: At Vector Talent Solutions, we welcome people of all abilities and want to ensure that all applicants have the opportunity to apply. If you require reasonable accommodation to complete the application process, please contact .

Job DescriptionBenefits: • Flexible schedule, • Opportunity for advancement, • Training & development, • Competitive salary, • Free uniforms, • Paid time off, • Company parties, • Team-oriented culture, • Community Impact, • Opportunity for career growth, • Paid training & development programs, • Competitive compensation, • Free uniformsLightspeed Restoration is a fast-growing leader in the restoration and remediation industry, proudly serving the Greater Philadelphia area. We help homeowners and businesses recover from water, mold and fire damage eventswith speed, professionalism, and compassion. Our team is committed to delivering high-quality results while upholding the highest standards of safety, communication, and customer care. Why Join Us? At Lightspeed Restoration, we believe in being the best, not the biggest. Our mission is to provide exceptional service with transparent pricing, backed by quality, integrity, and genuine care for our customers. Our reputation is built on doing the right thing and delivering results people can trust. Our employees are the heart of our mission. We invest heavily in training, certifications, and career developmentbecause when our people grow, our business grows. You wont be just another employee; youll be part of a team that makes a real impact during customers most difficult moments. Job Summary: The Lightspeed Restoration Field Technician provides 24/7 emergency water damage recovery, mold remediation, fire restoration, and indoor air quality services in homes and buildings. Field Technicians work directly under the supervision of a Lead Technician, Crew Supervisor, or Project Manager in a team atmosphere. The Supervisor will assign various tasks to the field technician to complete as part of the project as a whole. Typical Duties Include: • Light demolition and removal of finished building materials from the job site, • Operating water collection vacuums or pumps to extract standing water from inside structures, • Detailed, fine cleaning including vacuuming, brushing, and damp wiping surfaces and building contents, • Setting or adjusting equipment for drying or filtration, • Cleaning HVAC / air duct & exhaust systems using collection vacuums, rotary and stationary, • Squatting, crawling, and ladder work are often required to access all areas of a home or building, • Demonstrate proper, safe operation of battery-operated and corded power drills, hammer drills, circular saws, reciprocating saws, • Demonstrate safe lifting, pushing, pulling, and ladder-climbing practices, • Demonstrate safe chemical storage, labeling, and use practices, • Strong communication skills, • Excellent customer service skills, • Ability to operate PC and mobile devices, • Exhibit a professional, neat appearance, • Ability to lift 75 lbs, • Valid drivers license with satisfactory driving recordSafety Gear Provided:, • PPE, • Gloves (leather, nitrile, or coated cloth depending on application), • Safety Glasses or Goggles, • N-95 Respirators, • Poly Spun Tyvek style suits with hood and foot protection, • Shoe Covers, Knee Pads, and Muck Boots, • Hard Hats, Ear Protection, and steel-toe shoes may be required, depending on site application, • Fall protection for aerial workQualifications:, • No experience is required, but 1-2 years of relevant experience is preferred. We will fully train and certify the right person. Were looking for someone with a great attitude, strong work ethic, and eagerness to learn the restoration trade the right way., • Working knowledge of residential and/or commercial construction practices is a strong plus, • Self-motivated and growth-oriented, • Able to work efficiently and effectively in a team environmentWho Were Looking For, • We are seeking a hardworking, hands-on, mechanically inclined individual who loves using their tools, solving problems, and taking pride in a job well done.

Job Description Carpenter UCH is a Philadelphia-based property management company with significant real estate holdings in and around the Philadelphia metropolitan area. Our current portfolio consists of 4,000 residential units and 250,000 square feet of commercial space. A skilled carpenter is needed to join our crew to work on projects ranging from historic rehabs to commercial fit outs. We are seeking a Carpenter who is hardworking, detail-oriented and capable of doing rough framing through finish work. The ideal candidate for this position will be a team player who is willing to work both independently and on a crew. We are looking for a carpenter who is innovative, flexible and capable of producing high-quality finish work to meet project demands. Carpenter Skills: • General operating knowledge of all tools and equipment, • Basic math skills to perform algebra and geometry calculations related to construction tasks, • Problem-solving skills to identify issues and create action plans, • Ability to read blueprints and willingness to adhere to building codes, • Knowledge of basic construction materials, policies and procedures, • Ability to adapt to changing work priorities in a fast-paced, challenging environment, • Previous experience in framing, trim work, moldings, construction, cabinetry and finish work, • Ability to work effectively with a supervisor and other tradesmen to complete projects efficiently, • Valid driver’s license and vehicle, • Strong levels of communication – both written and spoken English. • Opportunities for professional and personal development and career growth, • Competitive Salary, • Comprehensive Health Insurance - Medical, Dental, Vision, • Medical & Dependent Care Flexible Spending Accounts (FSA), • Retirement plan – 401(k) with up to 4% employer match, • Paid Time Off (vacation, sick, 9 holidays, 2 floating holidays), • Employer-paid Short-term Disability, • Voluntary Long-term Disability, • Voluntary Life Insurance, • Voluntary Hospital Indemnity Insurance, • Employee Assistance Program (EAP), • Annual Awards & Recognition, • Company Paid Certifications & Licensing, • Employee Referral Program, • Apartment Discount Available Link to our real estate portfolio: Powered by JazzHR NV89ypEM9o