Trabajos construction supervisor en Los Angeles, CaliforniaCrear alertas

Overview: If you reside in California, please see our ___ for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking a Road Supervisor. The Road Supervisor will monitor street operations according to client, operations, and safety department requirements. Job Responsibilities: • Conduct site checks and road observations according to client and local policy. Document findings accordingly and provide necessary reports to project staff., • Conduct wheelchair securement and vehicle cleanliness checks on in service vehicles., • Monitor street operations for on-time performance and schedule and route adherence., • Provide customer information for site personnel and at key locations., • Respond to accidents and incidents assisting to manage the situation as well as collecting all required information, assist dispatch and operations staff in resuming service levels according to contract specifications and minimizing passenger disruptions., • Accompany operators to medical facilities as required after accident or injury, ensure proper administration of post-accident drug and alcohol testing., • Fill vacant shifts as necessary to ensure full service delivery., • Conduct gate checks at pull-out or pull-in times ensuring on-time service and proper completion of necessary paperwork including manifests and pre- and post-trip inspections., • Identify potential rerouting required as a result of traffic, construction or accident situations., • Ensure that all operators are fit for duty, meet uniform and equipment standards and are in possession of proper licensing and certifications., • Assist operators with service or passenger problems., • Assist dispatch and maintenance staff with vehicle change outs that occur in the field., • Provide feedback to safety and operations departments on service items that affect safety and performance, identify potential safety hazards and provide feedback to be incorporated into daily operations procedures., • Assist in determination of preventability of accidents and incidents and make recommendations for future training based on individual events or on system trends., • High School diploma or equivalent., • Certifications according to local contract requirements., • Previous passenger transportation in current project or similar environment required., • Previous training and/or field supervision experience preferred but not required., • Excellent safety and service record., • Knowledge of local training program and local operations., • Familiarization with service area., • Knowledge of client and service performance requirements., • Ability to manage emergency situations., • Knowledge of project specific vehicles, components and data/communications systems., • Knowledge of State and Federal regulations and corporate safety programs and policies., • Ability to read, write and speak English., • Ability to communicate effectively and work with all departments. MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Gray Construction is looking to add a Japanese Speaking Project Engineer with a Mechanical Engineering background to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other’s specialized capabilities without gaps or redundancies. Our robust offering—which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing—enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world’s most sophisticated organizations. • Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule., • Perform quantity take off(s), cost estimates and bid solicitation., • Provide research options and regulation information as required., • Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget., • Reviews and approves invoices and change orders., • Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed., • Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor., • Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices., • Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports., • Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor., • Communicate effectively with customer, direct consultants and subcontractors on the project(s)., • Responsible for the communication, implementation and enforcement of Gray’s safety program on site., • Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Company Description At Paulus, we combine our long history of underground wet utility craftsmanship with effective techniques to provide reliable water, sewage, and stormwater solutions. We integrate precise workmanship with quality engineering to build long-lasting, sustainable systems. Our diverse portfolio spans public works, commercial, and industrial projects, with contracts ranging from thousands to multi-million dollars. We offer comprehensive pipeline services that include sewer, water systems, drainage, pump stations, and specialty wet utility projects, handling projects of all scales from single-day and emergency work to large-scale endeavors. Role Description This is a full-time on-site role located in our Anaheim, CA office. The Safety Supervisor will lead the development, implementation, and continuous improvement of our safety programs across our organization. This role is critical in fostering a culture of safety, ensuring compliance with regulatory standards, and driving initiatives that reduce risk and enhance operational safety performance. To be successful in this role, the ideal candidate would have excellent communication skills and attention to detail, with a deep understanding of the construction industry and the ability to successfully manage multiple projects. Duties & Responsibilities • Design and implement new safety processes tailored to our construction operations., • Audit, update and promote awareness of the company’s Injury and Illness Prevention Program (IIPP)/(HIIPP), emergency action plans, and hazard communication protocols., • Submits recommendations for improvements and additions to the safety management program including emergency preparedness, accident prevention, general safety, and risk management., • Lead investigations and root cause analyses of incidents and partners with the Operations Manager to implement corrective actions to prevent recurrence., • Deliver safety training to construction workers on general and job-specific hazards., • Ensure all personnel are informed about new procedures, equipment, or hazards introduced to the workplace., • Conduct regular site inspections and audits to ensure adherence to OSHA/CALOSHA and company safety standards., • Maintain accurate records of safety incidents, training sessions, and corrective actions., • Collaborate with HR and management to ensure policies align with legal and organizational requirements., • Serve as a safety role model and mentor for field teams., • Encourage reporting of unsafe conditions and foster a no-retaliation environment., • Participate in safety committee meetings and contribute to strategic safety planning., • Other duties as assigned. Skills & Qualifications • Minimum of 5 years of safety experience, preferably in the construction industry., • Excellent communication, training facilitation, project management, and organizational skills., • Self-starter with the ability to manage multiple projects and deadlines independently., • Excellent interpersonal skills and the ability to collaborate across departments., • Extensive knowledge of company safety policies and applicable Occupational Safety and Health Administration (OSHA/CALOSHA) standards., • Proven experience in developing and improving safety programs., • Certification in safety (e.g., CHST, CSP) is a plus., • Bilingual (Spanish) Preferred Physical Requirements • Prolonged periods of sitting at a desk and working on a computer., • Physically able to conduct inspections and carry equipment used for inspections., • Ability to travel throughout job sites as required to conduct safety inspections., • Walk on uneven terrain including paved areas, gravel/rocks, and dirt/sand is required to access various locations on the construction sites., • Must be able to lift up to 25 pounds at a time. Benefits Overview We offer competitive company benefits to eligible positions, such as : • 100% Employer Paid Medical and Dental Insurance (Bronze level), • 401(k), • Discretionary Company Bonus, • Paid Vacation and Holidays, • Tuition Reimbursement, • And more! The salary range for this position is between $75,000 to $90,000 per year. • This range is indicative of projected hiring range, however base annual salary will be determined based on a candidate’s work location, skills and experience. In accordance with the California Fair Employment and Housing Act (FEHA), Paulus Engineering, Inc. is committed to providing reasonable accommodations to qualified individuals with disabilities. If you require an accommodation to participate in the application process or to perform the essential functions of this position, you may request one at any time by contacting Human Resources. The company will engage in a timely, good faith interactive process to determine appropriate accommodations, if any, that do not impose an undue hardship. We are committed to equal employment opportunity and prohibit discrimination and harassment based on race, national origin, sex, religion, color, disability, marital status, protected veteran status, sexual orientation, gender identity, gender expression, genetic information, citizenship, or any other characteristic protected by law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.

Moss & Company is currently looking for a Maintenance Lead, for some of properties in San Fernando Valley area with extensive experience new construction residential/multifamily properties, supervising a team, and taking care of the company asset(s). The Position As the Maintenance Lead, you are responsible in overseeing the day-to-day efforts of the maintenance team to meet all the residents/property needs. Key Responsibilities: • Lead and provide direction to the maintenance team, • Assign, monitor, and evaluate work performance for technicians, • Oversee unit preparation, repairs, and turns, • Manage maintenance budget, inventory, and expenses, • Coordinate with vendors on large-scale repairs and capital projects, • Ensure compliance with safety regulations and company policies, • Participate in city, building, lender, and bank inspections, • Train team members and share knowledge in maintenance procedures, • Maintain familiarity with property layout and systems (e.g., emergency exits, shut-off valves), • Collaborate closely with the property management team to address resident concerns, • Perform hands-on maintenance tasks as needed, • Carry out additional duties as assigned by management Qualifications: • 3–5 years of experience as a Maintenance Supervisor in properties with 500+ units, • 2–3 years managing a team of 4–5 maintenance professionals, • Strong expertise in plumbing, electrical, HVAC, carpentry, painting, etc., • Proficiency in Yardi, Google Suite, and related software, • Highly organized with strong attention to detail, • Customer-focused and team-oriented mindset, • Ability to multitask, prioritize, and work independently, • Familiarity with Fair Housing and OSHA regulations preferred Physical Requirements: • Frequent movement around the property, including stairs, • Regular bending, lifting, reaching, and physical labor, • Ability to lift/carry up to 25 lbs. (occasionally), 5 lbs. (frequently), • Effective communication with coworkers, vendors, and residents, • Use of hand and power tools, • Ability to work outdoors in various weather conditions, • Comfortable working in moderate noise environments We are an Equal Opportunity Employer

Directs, supervises and inspects the work of carpenters, apprentices and helpers in new construction, alteration, and repair work. Supervisor, Carpenter, Skilled Trades.

Job DescriptionSUMMARY OF POSITION: The Assistant Foreman is responsible for assisting the Foreman with the management of crew members by following the Company’s systems, processes, policies, safety practices to achieve high quality, safe, and efficient crew production. This role will also assist with providing client satisfaction to the highest standard. Critical for this position will be managing and holding individuals accountable for following Company processes and procedures every day as well as meeting performance expectations. This position will also need to embrace leading and inspiring crew members in fostering a culture of safety, passion, dedication, and loyalty. This position will report to the Foreman. RESPONSIBILITES: • Assist with project execution:, • Help install landscaping features like retaining walls, patios, and traditional landscaping., • Crew management:, • Work with Foreman to manage a crew, ensuring they are trained, supervised, and working safely., • Lead crew in preparation/execution of daily tasks in the Foreman’s absence., • Assist crews with time entry and issue management., • Material management:, • Assist in ordering, purchasing, and tracking materials, as well as ensuring proper inventory management., • Safety and compliance:, • Ensure that safety procedures are followed on the job site and that all work complies with Company and regulatory standards., • Partner with Safety Supervisor to ensure all Personal Protective Equipment (PPE) is worn by crew at times when equipment or job task specifies., • Ensure Job Hazard Analysis (JHA) sheets, Toolbox Talks reports are completed and submitted timely and daily., • Facilitate on the job stretching exercises before job start, after lunch, and before end of day., • Maintain clean, orderly, and safe job sites at all times., • Other tasks/responsibilities:, • Perform other duties as assigned.QUALIFICATIONS AND EXPERIENCE:, • Two (2) to three (3) years of professional Assistant Foreman experience and work history., • Knowledge of acceptable safe work practices including wearing the necessary personal protective equipment (PPE)., • Proactive self-starter, achieving high productivity with strong attention to detail; ability to work independently with little instruction; coordinate and prioritize multiple tasks, set deadlines, and complete projects in a timely manner is required., • Demonstrate the highest level of professional and ethical conduct., • Positive, tenacious attitude., • Strong verbal and written English communication skills., • Ability to work in a fast-paced and sometimes unpredictable environment; works well under pressure and tight deadlines., • Ability to consistently apply good judgment and make good decisions., • Ability to always maintain confidentiality and discretion., • Proven analytical and problem-solving abilities., • Organized with a proven ability to juggle multiple projects at once., • Excellent leadership and time management skills., • Experience managing complex project/event logistics., • Some local travel – up to 25%., • Must possess a valid California Driver's License., • The requirements and duties listed are representative and not exhaustive of the knowledge, skill, and/or abilities required.TECHNICAL SKILLS:, • Ability to comfortably work with software and apps on a desktop, iPhone, and/or iPad., • Knowledgeable with Microsoft Office (Word, Excel, Outlook, PowerPoint), Adobe Acrobat., • Quick learner and ability to figure things out on your own.LANGUAGE SKILLS:, • Ability to communicate effectively in English (oral and written)., • Ability to read and comprehend instructions and information to effectively execute and achieve results., • Bilingual in Spanish is required.EDUCATION:, • High School or GED certificate, required., • Bachelor’s degree in Horticulture, Landscape Architecture or related field, preferred., • Landscaping, construction/installation industry experience highly preferred.COMPETENCIES:, • Professionalism: As it relates to how you carry yourself among fellow co-workers and customers., • Communication: Strong, effective communication skills to interact with co-workers, Management, clients, vendors, and/or visitors. Communication skills include listening skills, verbal and written communication skills and client relation skills., • Collaboration: Incorporate teamwork, mutual respect, active engagement, cooperation and client focus., • Accountability: Initiative to take ownership of responsibilities, the ability to prioritize and the working knowledge and skills to take action., • Problem Solving: Blends problem solving skills, judgement and decision-making skills along with creativity and resourcefulness., • Ethical standards: High ethical standards in how you go about & perform your work always taking into consideration what’s best for the customer, their property, and the company., • Customer service and satisfaction: Adhere to the philosophy that customers are # 1 and are the livelihood of Crestview Landscape, Inc. Strong sense of customer service and satisfaction., • Attention to detail: High level of detail and a focus on the little things that make a big difference.

Job DescriptionSalary: 75,000-125,000 JOB DESCRIPTION The Electrical Estimator reports to the Team Leader / Sponsor and accurately estimates labor, material, sub-contractor, and machinery costs associated with electrical construction on various structures ranging from residential, commercial, and industrial applications, including low-voltage & fire-alarm systems. PRIMARY RESPONSIBILITIES • Provide accurate estimates of costs and quantities of material, machinery, buyouts, and labor to complete electrical construction projects., • Review all bid proposal documents, including but not limited to project plans, specifications, and drawings, to determine the scope of work and required contents of the estimate., • Prepare estimates used by management for purposes such as planning, organizing, and scheduling work., • Prepare and maintain a directory of suppliers, contractors, engineers, and subcontractors., • Participate in bid presentations and submittal of qualification information to the client., • Provide project-specific conceptual and budgetary information detail., • Develop and maintain working relationships with clients, engineers, subcontractors, and vendors. 8. Ability to analyze electrical drawings and specifications, mechanical drawings, architectural drawings, structural drawings, landscape drawings, and civil drawings., 9. Perform project takeoffs, including completing standard estimating forms, filling in project dimensions, sequence of operations, number of units, and other information., 10. Estimate and budget for factors that may increase overall costs, including shipping delays, weather, and waste disposal., 11. Participate in pre-bid job site inspections and / or job walks. • Ability to accurately and efficiently input data into a computer and detect/correct entry errors before submitting bid to management/client., • Represent the company in a professional manner to clients, vendors, and other external institutions., • Knowledge of electrical theory and practice, engineering/design concepts, estimating, and negotiating., • Knowledge of NEC, FLS, and FAC regulations., • Knowledge of budgeting, forecasting, and margin/cost control principles., • Knowledge of computer programs including (Outlook, Excel, Word, & Accubid), electrical calculations, estimate forms, filing, clerical methods, and policies/procedures used within the construction industry., • Work requires professional written and verbal communication and interpersonal skills., • Ability to deal courteously and efficiently with vendors and office staff., • Ability to work and meet deadlines while simultaneously managing several projects., • Ability to adhere to well defined procedures., • Ability to participate in department meetings., • Ability to maintain integrity, accountability, credibility, and high ethical standards., • Skills normally acquired through a combination and completion of a bachelors degree in engineering/construction management and/or five years of experience in an electrical construction estimating position. Working conditions are normal for an office or non-manual based environment with the exception of lifting/moving plan rolls weighing up to 50lbs.

Job Description Assistant Project Manager – Permitting Beverly Hills, CA | Hybrid | Full-Time Build Your Career While We Build the Future About Us At Milrose, we build more than buildings—we build trust, expertise, and lasting partnerships. As leaders in municipal permitting and code consulting, we empower our clients to bring their projects to life through expert guidance, advocacy, and execution. Position Overview We’re looking for an Assistant Project Manager to join our West Coast Permitting team. In this role, you’ll independently manage your own projects with the support of a supervisor or more senior PM in delivering seamless permitting solutions across a variety of commercial construction projects. You’ll play a key role in keeping projects on track, communicating with municipal agencies, and maintaining momentum from start to finish. What You’ll Do • Assist in the preparation and submission of permit packages, • Perform due diligence, create permit checklists, and update project tracking tools, • Act as a liaison with city departments and monitor project statuses, • Maintain documentation including meeting minutes and permit logs, • Support project progress through scheduling, quality control, and follow-ups, • Serve as backup to Project Managers when needed What You’ll Bring Required: • Minimum 1 year of experience in construction administration or project coordination, • Degree in Construction Management, Architecture, Engineering, Urban Planning or related field (or equivalent experience), • Familiarity with permit submittals, building/zoning codes, and reading construction drawings, • Proficiency in Microsoft Office Suite, • Experience working with municipal agencies and permitting portals, • Knowledge of California jurisdictional processes Work Environment & Schedule • This position is based in Beverly Hills, CA, and is hybrid., • Standard schedule is Monday–Friday, 8:00 a.m. to 5:00 p.m., with occasional overtime., • Minimal travel required. Compensation & Benefits • Salary range: $58,000 – $65,000 annually, based on knowledge, skills, and experience., • Comprehensive health, dental, vision, disability, life insurance and 401K with a match., • Pre- and post-tax commuter benefits, • Monthly phone stipend, • Paid time off: vacation, sick, personal, and birthday PTO, • Career development opportunities Milrose Consultants, LLC is an Equal Opportunity Employer. We are committed to fostering an inclusive environment for all employees and applicants. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected category. Milrose Consultants, LLC is committed to providing reasonable accommodation for qualified individuals with disabilities. If you need assistance or an accommodation due to a disability, please contact us at . Notice to third-party agencies: Please do not contact our team directly. All recruitment is managed by Milrose’s in-house Talent Acquisition team.

Job DescriptionShifts: 2nd Shift (2:30 PM) & 3rd Shift (10:00 PM) 2nd Shift ($19.50hr) & 3rd Shift ($20.00Hr) Position Summary The Assembly Associate supports the Assembly Department by assisting with the construction and assembly of components under the guidance of skilled personnel and supervisors. This role requires attention to detail, teamwork, and the ability to perform hands-on work in a fast-paced manufacturing environment. Key Responsibilities * Perform assembly operations accurately and efficiently according to specifications and instructions. * Ensure incoming parts and materials are properly identified and distributed to the correct work areas. * Assist team members with assembly tasks and provide support when handling large parts. * Communicate effectively with supervisors and team members to meet production goals. * Maintain a clean, organized, and safe work environment. * Follow all company safety policies and department-specific procedures. * Complete assigned work within established timeframes and quality standards. * Perform other duties as assigned by the supervisor. Education & Experience * High school diploma or equivalent required. * Minimum 6 months of work experience required. * Experience in a manufacturing or production environment preferred. Skills & Abilities * Ability to use common hand tools (drill, screwdriver, hammer, etc.). * Knowledge of hardware such as screws, bolts, washers, and rivets. * Familiarity with shop equipment (saws, drill presses, etc.) preferred. * Strong attention to detail and ability to follow instructions. * Physically able to stand or walk for long periods, kneel, bend, and lift up to 40 lbs. * Reliable, punctual, and willing to work overtime when needed. * Ability to work safely and effectively in a manufacturing environment. Job Posted by ApplicantPro

Job DescriptionCompany Description For more than 70 years, IDB Bank has made it our mission to be the best bank for our clients by putting their needs first, and the success we’ve enjoyed fundamentally comes down to our people. Here at IDB, you’ll work side by side with some of the most talented professionals in the industry who share a strong sense of teamwork and a passion for providing exceptional service down to the smallest detail. We offer a comprehensive benefits package that includes generous paid time off and the ability to participate in our medical coverage and 401(k) plan on your very first day with us. We are also committed to diversity and inclusion, and to providing all of our team members with an equal opportunity to succeed and make meaningful contributions within a work environment that is respectful, welcoming and inclusive. Job Description Job Description • Perform timely financial analysis/underwriting for renewals, annual reviews, and modifications (extensions, waivers, amendments, etc.) by effectively weighing IDBNY’s credit policies and understanding of desired risk profile, • Proactively monitor the portfolio for indicators of stress/risk such as failed covenants, downward financial statement trends, payment schedule interruptions, collateral devaluation, etc., • Keep RMs informed of any issues with credit or portfolio risk, • Identify and inform RM of cross-sell, referral and credit expansion opportunities, • Ensure thorough and on-time collection of financial statements, rent rolls, and other required reporting requirements to allow for timely completion of End of Month (EOM) reports required for portfolio management, • Support RMs in providing top client service in-line with the bank’s expected high standards, • Remain well informed on all client matters to minimize risk, • Complete the annual review of credits, • Remain fully compliant on all client matters, • Achieve all individual goals and contribute to all team goals, • Develop positive working relationships with all segments and individual bank partners, • Complete all required training timely, • Conduct oneself as a true brand ambassador for the bankQualifications Qualifications • Portfolio Manager needs to have strong credit and organizational skills as well as solid understanding of commercial real estate credit facilities (bridge loans, term loans, construction loans, lines of credit, other commercial mortgage types, etc.) with loan sizes varying from $5MM to $50MM, • Minimum experience of 3– 5+ years in commercial loan portfolio management/underwriting or another relevant area required, • Must be able to work as part of the Middle Office team working together with Direct Manager, Account Officers and Group Manager, • Willingness to take on special projects as they arise., • Should already be familiar with bank reports, systems and processes, • Should possess strong communication skills (verbal and written), • Ability to work in a collaborative environment and while meeting tight deadlines, • Strong technical skills including MS Office: Excel, Word and PowerPoint Additional Information Compensation: The expected annual salary for this position is between $100,000-120,000 annually at the start of employment. A salary offer is determined on an individualized basis, taking into consideration factors such as an individual’s skills and experience. In addition to base salary, our total rewards package also includes eligibility for an annual bonus, medical, pharmacy, dental, and vision plans, life and disability insurance, employee wellness program, retirement and savings plans with employer contributions, generous holiday and paid time off schedules, parental leave, and tuition reimbursement. The Bank will make reasonable accommodations to the following employees to allow them to perform the essential functions of their position, except where doing so would result in undue hardship to the Bank: • Those with a known mental or physical disability., • Pregnant individuals and/or individuals with pregnancy or childbirth-related medical conditions., • Victims of domestic violence, sex offenses or stalking. The Bank retains the ultimate discretion to choose the appropriate reasonable accommodation. Upon reaching a final determination at the conclusion of the cooperative dialogue, the Bank will provide the requesting individual with a written final determination identifying any accommodation granted or denied. In addition, the Bank will maintain any information regarding the employee’s request and status in the strictest confidence, except as requested by the employee, as required on a need-to-know basis or as otherwise required by law. Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. All your information will be kept confidential according to EEO guidelines. IDB BANK, INCLUDING ITS SUBSIDIARIES AND DIVISIONS, PROVIDES EQUAL EMPLOYMENT OPPORTUNITIES TO ALL EMPLOYEES AND APPLICANTS FOR EMPLOYMENT WITHOUT REGARD TO RACE, COLOR, RELIGION, SEX, SEXUAL ORIENTATION, NATIONAL ORIGIN, AGE, DISABILITY, GENETIC STATUS, CITIZENSHIP STATUS, MARITAL STATUS, MILITARY OR VETERAN STATUS, CURRENT UNEMPLOYMENT OR ANY OTHER LEGALLY PROTECTED CATEGORY IN ACCORDANCE WITH APPLICABLE FEDERAL, STATE AND LOCAL LAW. NOTHING IN THIS SITE CONSTITUTES A PROMISE OR OFFER OF EMPLOYMENT. IDB BANK, INCLUDING ITS SUBSIDIARIES AND DIVISIONS, PROVIDES EQUAL EMPLOYMENT OPPORTUNITIES TO ALL EMPLOYEES AND APPLICANTS FOR EMPLOYMENT WITHOUT REGARD TO RACE, COLOR, RELIGION, SEX, SEXUAL ORIENTATION, NATIONAL ORIGIN, AGE, DISABILITY, GENETIC STATUS, CITIZENSHIP STATUS, MARITAL STATUS, MILITARY OR VETERAN STATUS, CURRENT UNEMPLOYMENT OR ANY OTHER LEGALLY PROTECTED CATEGORY IN ACCORDANCE WITH APPLICABLE FEDERAL, STATE AND LOCAL LAW. NOTHING IN THIS SITE CONSTITUTES A PROMISE OR OFFER OF EMPLOYMENT.

Job Description Clinical Nurse Manager Behavioral Health Unit POSITION SUMMARY Under the direction of the Behavioral Health Nursing Director or Chief Nursing Officer (CNO), the Clinical Nurse Manager of Behavioral Health Services is responsible for providing and managing staff and material resources that are necessary for effective patient care delivery for assigned unit(s). This position has assigned shift responsibility. The Clinical Nurse Manager applies critical reasoning and sound decision making skill sets to ensure patients receive the highest quality of care. The Clinical Nurse Manager will oversee Behavioral Health Unit (BHU) day-to-day clinical and budgetary operations, lead, develop, and train clinical staff, evaluate and update unit policies, and evaluate and improve clinical procedures to ensure the best care is delivered to Mission Community Hospital patients and families. In collaboration with the Nursing Director or CNO, the Clinical Nurse Manager will plan, direct, coordinate and evaluate all patient care activities and services to promote clinical excellence. The Clinical Nurse Manager will be accountable for achieving clinical service excellence and unit financial goals; effective human resources management; quality assurance and performance improvement; regulatory compliance; and staff competency and development. In addition, Clinical Nurse Manager will serve as a leader and role model for staff and will be an active participant in organizational and nursing department decision-making. MAJOR RESPONSIBILITIES SERVICE PERFORMANCE • Greets/acknowledges customers warmly, with a smile, and immediately when they enter department/unit/area., • Asks how the customer may be helped with interest and concern., • Listens attentively, does not interrupt., • Accepts ownership and takes action to resolve customer needs and/or concerns., • Is attentive and responsive to the expectations of physicians, co-workers and direct reports., • Accepts constructive criticism and modifies actions accordingly., • Is generous in acknowledging a job well done., • Uses words and behaviors that express consideration, concern and respect., • Facilitates and holds staff accountable for meeting department customer service standards in the performance of duties., • Utilizes telephone skills effectively as outlined in the Star Service Program., • Keeps all private information about staff or patients confidential. SERVICE PERFORMANCE (continued) • Identifies customers and their service requirements., • Meets or exceeds customer service improvement targets as demonstrated by dashboards, etc. VALUE ADDED – INCREASES WORTH OF SERVICE TO MISSION COMMUNITY HOSPITAL, • Participates in marketing activities of the Hospital including but not limited to committees/task forces, speaking engagements, conducting tours, Hospital sponsored health fairs., • Contributes to marketing materials such as brochures, newsletters, teaching materials., • Participates in staff recognition activities in ways that reward behaviors reflecting positively on Mission Community Hospital., • Engages in interdepartmental /multi-department/house-wide process improvement forums/task forces/committees., • Offers and implements solutions to challenges/problems., • Assist with development-related activities including fund raising programs & activities., • Monitors the marketplace and recommends new and creative business opportunities., • Analyzes targeted existing services and product lines for cost/benefit and develops appropriate strategies to improve growth where applicable., • Attends/participates in activities that contribute to professional growth and development. LEADERSHIP • Assume assigned shift responsibility for the overall patient care management of the department., • Assumes Charge Nurse role as needed based on hospital census and/or staffing., • Assists licensed staff with admitting and discharging patients to augment staffing and ensure effective patient throughput., • Oversee treatment planning activities and documentation compliance., • Perform primary care nursing functions when unit is short staffed., • Supervise patient care staffing and shift assignments to ensure appropriate skill mix., • Ensures efficient and productive department operations by monitoring staff performance and intervening appropriately to improve clinical activities and/or processes., • Participates in establishing practice standards that assure department needs are met in an optimum fashion that is economically sound., • Coordinates Patient Satisfaction/Customer Service unit based initiatives., • Assists with the education and training of staff in the use of patient satisfaction/customer service improvement tools, corrective action plan(s) development and implementation. LEADERSHIP (continued) • Advocates and promotes excellence in patient satisfaction by proactively interacting with patients and their families., • Establishes a climate of participative management that encourages relevant change and allows for individual growth and development., • Maintains effective communication staff, colleagues, employees, and medical staff., • Maintains an ongoing awareness of the status, issues, successes and programs of the assigned areas/departments., • Assures coordination of departmental activities through appropriate committee assignments, defined feedback mechanisms, and periodic evaluation., • Provides a climate for achievement by educating and encouraging excellence in practice., • Assists in administration and coordination of Hospital activities., • Recommends changes in the administrative policies to carry out objectives of the Hospital more effectively., • Recommends improvement of hospital facilities including construction or renovation of structure and purchase of new equipment based on personal inspection of premises, consideration of hospital policies, and knowledge of community needs and resources., • Interprets hospital and department policies, objective, and operational procedures to direct reports., • Develops and implements policies and procedures to support the provision of services., • Works effectively as part of the department team to facilitate department’s ability to meet goals and objectives., • Effectively integrates department/unit functions into the overall operations of Mission Community Hospital (MCH) by collaborating with other department heads to assure the smooth integration of services., • Assures department/unit representation on interdisciplinary task forces/committees as requested., • Communicates with other managers / directors department specific priorities, deadline adjustments and availability., • Submits accurate and timely status reports to senior management and/or hospital committees as required., • Provides, collaboratively with the nursing leadership team, effective and seamless administrative shift coverage of the nursing department including acting as Administrative House Supervisor when required., • Accountable for facilitating a collegial relationship between nurses, physicians, and other healthcare providers and for promoting service delivery which results in patient and family satisfaction., • Collaborates with other members of nursing leadership to create an environment that promotes excellence in clinical practice., • Maintains nursing operations by initiating, coordinating, and enforcing personnel policies and procedures., • Assures quality of care by developing and interpreting hospital and nursing division's philosophies and standards of care; enforcing adherence to state board of nursing and state nurse practice act requirements and to other governing agency regulations; measuring health outcomes against standards; and making or recommending process changes to improve patient care., • Maintains nursing staff by recruiting, selecting, orienting, and training qualified licensed and unlicensed clinical staff., • Ensures adequate patient care staffing and adheres to established acuity system staffing plan., • Performs staff coaching, mentoring, counseling, and disciplining as indicated., • Provides information to patients and health care team by answering questions and requests., • Resolves patient needs by utilizing multidisciplinary team strategies., • Maintains safe and clean working environment., • Participate in performance improvement data collection, corrective action plans, and committee activities., • Maintains nursing supplies inventory by studying usage reports; identifying trends; anticipating needed supplies; approving requisitions and cost allocations., • Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies., • Ensure that staff complies with federal and state local regulations and Joint Commission Standards for accreditation., • Participate in interviewing, hiring, disciplining, and orienting staff., • Perform staff job performance and competency evaluations timely., • Responsible for staff timecard accuracy verification and timely approval., • Consult with staff regarding nursing concerns and practices., • Resolve departmental conflicts as quickly and efficiently as possible. Document all actions taken; including disciplinary and employee-related matters., • Promote a positive and safe work environment., • Conduct daily patient care rounds., • Conduct daily staff clinical practice and education huddles., • Conduct monthly departmental staff meetings., • Participate in relevant leadership and clinical seminars/in-services and encourage staff members to attend job-related seminars/in-services., • Perform other Clinical Manager duties as assigned.

Job DescriptionSalary: $85,000.00-$105,000.00 JOB DESCRIPTION The Assistant Project Manager reports to the Project Manager and is responsible for providing assistance to the Project Manager in the various aspects of electrical construction management. Work involves the aid in creating and implementing the project management plan, processing of purchase orders, change orders, vendor invoices/billings, and client/vendor credits. The Project Engineer will also be responsible of the tracking of RFIs, material, and the organization of data that is to be analyzed by management. PRIMARY RESPONSIBILITIES 1. Communicate with people involved in a project (clients, vendors, subcontractors ) and design team., 2. Assist Project Manager with reviewing plans/drawings, preparing estimates according to budgets, and attend/holds meetings., 3. Assist Project Manager with budget management and contract management., 4. Delegates tasks, helps identify needed resources, and manage daily operations during the absence of the Project Manager., 5. Ability to accurately and efficiently input data into a computer in addition to detect and correct entry errors before posting. • Process and track material purchases, fixtures, switchgear, and work orders submitted from operations., • Create and utilize Action and Tracking logs., • Print & send project labor report with current hours worked and code classifications to foreman., • Process all vendor billings, invoices, and credits pertaining to the project., • Aid with change orders and take offs., • Order, coordinate, and track the delivery and pick up of all material and rental equipment pertaining to the project., • Track the location of materials and equipment stored within the AJK&A warehouse pertaining to the project., • Coordinate and ensure accurate material delivery from the AJK&A warehouse using Transmittal forms., • Create, track, log, and coordinate the correspondence of all RFIs with the client., • Collect cut sheets for general material, fixtures, switchgear, and other materials in order to assemble/create a submittal or closeout package for Project Manager and Foreman review and approval., • Coordinate material buyouts and phasing with Project Manager., • Create, maintain, and ensure accurate and efficient filing of internal documents pertaining to the project., • Ensure current project drawings/plans are printed; slip sheet and/or upload to the Job Folder and PlanGrid., • Utilize PlanGrid functions, • Build and maintain good relationships with vendors, subcontractors, and clients., • Ensure health and safety regulations are implemented., • Ensure tool reports are up to date and sent to the foreman., • Participate in Turnover Meetings, • Other duties as assigned ADDITIONAL RESPONSIBILITIES • Represent the company in a professional manner to clients, vendors, and other external institutions., • Maintain and enhance the companys reputation., • Fundamental knowledge of electrical drawings, specifications, financial record keeping, computer programs (Outlook, Excel, Word, & Accubid), calculations, forms, filing, clerical methods, and policies/procedures used in an office environment., • Professional written and verbal communication and interpersonal skills., • Ability to deal courteously and efficiently with clients and staff., • Ability to work and meet deadlines while simultaneously managing several projects., • Ability to adhere to well defined procedures set by management., • Ability to participate in project meetings., • Ability to maintain integrity, accountability, credibility, and high ethical standards., • Ability to manage time effectively, prioritize tasks and able to work to deadlines., • Ability to work well on your own initiative., • The completion of an Associate of Arts degree and/or two years of experience in the construction industry. Working conditions are normal for an office or non-manual based environment.

Job Description Position Description: • Coordination with project management personnel to develop and prepare procurement packages for the selection of general contractors and professional services providers. Related change management activities may or may not be included., • Management of a variety of competitive bidding/selection processes for construction and/or professional services, from planning through award including direct responsibility for all administrative functions (i.e preparing procurement documents, addenda, evaluation materials, approval documentation, award documentation, contract documents)., • Management of the pre-qualification processes for professional and/or construction services firms (i.e. Architectural, Environmental, and small Construction Services). This would include the following activities: Preparation of Request for Qualifications (RFQ) packages in conjunction with Subject Matter Experts (SME); Leading pre-submittal instruction meetings; Coordination of Request for Clarifications (RFC) and issuance of Addenda; Conduct responsiveness reviews of submitted Statements of Qualifications (SOQ); Coordination and facilitation of the evaluation process; Coordination of post award submittals; Prepare awarded Contracts and coordinate execution., • Based on workload and department resources, at the sole discretion of the department supervisor, a variety of tasks and responsibilities may be assigned and or changed over time to best serve the needs of the District., • Strict adherence to policies, procedures, templates, and applicable laws is a daily part of this role., • Reporting, tracking, and quality control for assigned procurements processes., • Responsibility for multiple concurrent procurement processes with various stakeholders., • This is a heavily administrative role, and applicants should understand this would not include supervising others performing these functions., • This role requires a high level of attention to detail and compliance under the scrutiny of consistent audits both internal and external, accordingly applicants should strongly consider whether this would be a good fit. 1-3 years of experience relevant to the position description. Knowledgeable of standard contract terms and conditions. Proficient with Microsoft Excel, Word, and Adobe Acrobat. Demonstrate a reliable, responsive and positive work ethic with the highest degree of integrity. Must be detail-oriented and organized. Must be a fast learner and logical thinker. Must be focused on quality and accuracy. Excellent communications skills, both written and verbal. Ability to accurately track and report status when managing concurrently running projects. Preferred Qualifications: • Associates degree (relevant field preference above others), • Experience with program/project management, • Experience with an electronic bidding software, • Experience with project management software Job Posted by ApplicantPro

Job Description As part of the Project Management Office (PMO) Contracts Team, responsibilities may include any of the following: • Coordination with project management personnel at the PMO and College sites to develop and prepare procurement packages for the selection of general contractors and professional services providers. Related change management activities may or may not be included., • Management of a variety of competitive bidding/selection processes for construction and/or professional services, from planning through award including direct responsibility for all administrative functions (i.e preparing procurement documents, addenda, evaluation materials, approval documentation, award documentation, contract documents)., • Management of the pre-qualification processes for professional and/or construction services firms (i.e. Architectural, Environmental, and small Construction Services). This would include the following activities: Preparation of Request for Qualifications (RFQ) packages in conjunction with Subject Matter Experts (SME); Leading pre-submittal instruction meetings; Coordination of Request for Clarifications (RFC) and issuance of Addenda; Conduct responsiveness reviews of submitted Statements of Qualifications (SOQ); Coordination and facilitation of the evaluation process; Coordination of post award submittals; Coordination for BOT Award; Prepare awarded Contracts and coordinate execution., • Based on workload and department resources, at the sole discretion of the department supervisor, a variety tasks and responsibilities may be assigned and or change over time to best serve the needs of the District., • Strict adherence to policies, procedures, templates, and applicable laws is a daily part of this role., • Reporting, tracking, and quality control for assigned procurements processes., • Responsibility for multiple concurrent procurement processes with various stakeholders., • This is a heavily administrative role and applicants should understand this would not include supervising others performing these functions., • This role requires a high level of attention to detail and compliance under the scrutiny of consistent audits both internal and external, accordingly applicants should strongly consider whether this would be a good fit. Minimum Required Qualifications: • Associates degree (relevant field preference above others)., • 3-6 years of experience relevant to the position description., • Knowledgeable of standard contract terms and conditions., • Proficient with Microsoft Excel, Word, and Adobe Acrobat., • Demonstrate a reliable, responsive and positive work ethic with the highest degree of integrity., • Must be detail-oriented and organized., • Must be a fast learner and logical thinker., • Must be focused on quality and accuracy., • Excellent communications skills, both written and verbal., • Bachelor’s degree (relevant field preference above others), • Experience with program/project management, • Knowledge of relevant California Higher Education and Public Contract Code requirements, • Experience with an electronic bidding software, • Experience with project management software

Job Description Job Summary The Dentist is a key member of the oral health department and provides comprehensive and appropriate dental care and treatment to patients. He/she serves as a role model for the staff through the provision of excellence in oral health services and in keeping with the mission of the organization. Qualifications • Required education, experience and/or training: Current California Dental and DEA licenses., • Demonstrated skill in diagnosing dental disease from the clinical exam and radiographic analysis. Demonstrated skill in developing an appropriate treatment plan., • Demonstrated knowledge and skill in performing restorative procedures safely under local anesthetic and nitrous oxide sedation., • Demonstrated skill in performing extractions., • Demonstrated skill in performing emergency palliative treatment including pulpotomies and pulpectomies. Demonstrated skill in providing treatment of periodontal disease including scaling and root planning., • Bilingual verbal skills in English and Spanish(preferred)., • Proficiency in molar endodontic therapy and surgical extractions, preferred., • Ability to work with infectious disease patients., • Ability to accurately and efficiently enter patient data via Electronic Dental Record (EDR)., • Ability to interact effectively with people of various socio-economic backgrounds., • Ability to deal with patient complaints with tact and diplomacy., • Ability to work with volunteers, dental students., • Comply with HIPAA and Confidentiality Policies and Procedures as they apply to the job., • Demonstrate full scope of Dentistry, including experience with adult and pediatric patients, ages 0-21., • Experience: 7+ years of hands-on dentistry experience, with a proven ability to manage complex dental procedures independently, including OS, molar endodontics, and advanced restorative treatments., • FQHC Experience: Work experience in a high volume Community Health Center (CHC) or Federally Qualified Health Center (FQHC) is strongly preferred., • Manage Patient Load: Efficiently manage a daily patient load of 20-25 patients, ensuring quality care and high patient satisfaction in a timely manner., • Leadership and Staff Supervision: Ability to take a leadership role in supervising, mentoring, and training dental staff, ensuring compliance with clinical protocols and efficient practice operations. Supervisory experience with dental assistants and hygienists, including in the absence of the Dental Director., • Adheres to all Harbor Community Health Center (HarborCHC) policies and procedures., • Observes all policies and procedures for the use of the time-keeping system, including attendance, tardiness, proper clocking procedure, overtime authorization, and that employee's nametag is visible., • Conducts self in a manner that represents HarborCHC’s core values at all times., • Maintains a positive and respectful attitude with all work-related contacts., • Provides excellent customer service., • Communicates regularly with his/her immediate supervisor about departmental and HarborCHC concerns., • Consistently reports to work prepared to perform the duties of the position., • Meets productivity standards and performs duties as workload necessitates. To perform the job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: • Provide Routine and Emergency Dental Services: Demonstrate full scope of Dentistry, including experience with adult and pediatric patients, ages 0-21. Diagnose and treat dental conditions, develop treatment plans, and perform both intra- and extra-oral examinations. Deliver general restorative procedures (e.g., composite and amalgam fillings), crown and bridge construction, removable prosthetics, endodontic treatments, and oral surgeries., • Administer Anesthesia and Medications: Prescribe and administer anesthetics, medications, and treatment regimens as appropriate to meet patient needs, • Initiate and interpret radiographs and laboratory studies., • Referral and Coordination: Refer patients to specialists or other healthcare providers for advanced care or specialized treatments when necessary., • Patient Education: Educate patients and their families on oral health, disease prevention, and proper dental hygiene practices. Communicate dental needs and treatment options with patients and their representatives in an objective, clear, and compassionate manner., • Supervision and Coordination of Dental Staff: Oversee and direct the activities of dental support staff to ensure effective delivery of patient care. Supervise Dental Auxiliary staff and provide guidance, mentorship, and support as needed., • Community Health Engagement: Actively participate in community health promotion, education, and disease prevention programs to promote oral health in the local community., • Staff Training and Development: Assist with in-service training and continuous professional development of dental department staff, enhancing skills, knowledge, and adherence to clinical protocols and best practices., • Compliance & Safety: Participate in safety, compliance, and quality improvement programs. Adhere to all federal, state, and local regulations and standards governing the delivery of care in a community health center environment., • Patient Satisfaction: Foster a positive, compassionate, and welcoming environment for both patients and their families. Promote patient satisfaction by delivering high-quality care and addressing concerns in a professional and empathetic manner., • Mission Alignment: Support and contribute to HarborCHC’s mission and values through clinical practice, patient care, and team collaboration. · Our mission is to provide low-cost, comprehensive high quality health care and supportive services to those in our community who do not have access to medical care. · Our vision is "Improving the Health and Well Being of our Community" · Our Core Values consist of Integrity, Compassion, Excellence, and Diversity. · Employees must possess a strong commitment to the mission, policies, goals and philosophy of Harbor Community Clinic. HR PROCEDURAL REQUIREMENTS · Legal authorization to work in the United States. · Clear all post offers, pre-employment background screening, and education verification. · Must be vaccinated against COVID-19 or have a qualifying medical/religious exemption. · This is not intended to cover all aspects of your description as additional duties may be assigned. PHYSICAL REQUIREMENTS The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. While performing the duties of this job, the employee is regularly required to sit; use hands to manipulate objects, tools or controls; reach with hands and arms; and talk and hear. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust. Hours: HarborCHC is open Monday-Thursday 7:00am-7:00pm, Friday 8:15am-5:00pm, Saturday 8:00am-5:00pm with occasional overtime, or other shifts based on clinic need. This is a non-exempt position and any overtime must be approved by the Supervisor in advance. EQUAL EMPLOYMENT OPPORTUNITY STATEMENT HarborCHC does not discriminate in employment opportunities or practices on the basis of race; religion; color; sex/gender (including pregnancy, childbirth, breastfeeding or related medical conditions); sexual orientation; national origin; ancestry; physical or mental disability; medical condition; genetic information/characteristics; marital status/registered domestic partner status; age; sexual orientation; reproductive health decision-making; military or veteran status; use of cannabis off the job and away from the workplace; and any other basis protected by federal, state or local law or ordinance or regulation, or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. This policy applies whether the individual has or is perceived to have any of the characteristics protected by law or is associated with a person who has or is perceived to have any of the characteristics protected by law. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. DISCLAIMER The above statements define this position as it currently exists and are intended to describe the general content of and requirements for this job. They are not to be considered as an exhaustive statement of duties, responsibilities, or requirements and does not limit the assignment of additional duties at the discretion of the supervisor. HarborCHC is an at-will employer. In addition, HarborCHC may change your duties, compensation or hours, or transfer, reassign, promote, demote, suspend or otherwise change the terms and conditions of your employment (other than the at-will relationship), with or without cause or prior notice. Join our team of professionals dedicated to improving the oral health of our community while fostering a supportive environment for both staff and patients alike.

Job Description Job Summary The Dentist is a key member of the oral health department and provides comprehensive and appropriate dental care and treatment to patients. He/she serves as a role model for the staff through the provision of excellence in oral health services and in keeping with the mission of the organization. Qualifications Required education, experience and/or training: • Current California Dental and DEA licenses., • Demonstrated skill in diagnosing dental disease from the clinical exam and radiographic analysis. Demonstrated skill in developing an appropriate treatment plan., • Demonstrated knowledge and skill in performing restorative procedures safely under local anesthetic and nitrous oxide sedation., • Demonstrated skill in performing extractions., • Demonstrated skill in performing emergency palliative treatment including pulpotomies and pulpectomies., • Demonstrated skill in providing treatment of periodontal disease including but not limited to scaling and root planning., • Bilingual verbal skills in English and Spanish (preferred)., • Ability to work with infectious disease patients., • Ability to accurately and efficiently enter patient data via Electronic Dental Record (EDR) and lock notes in a timely manner., • Ability to interact effectively with people of various socio-economic and cultural backgrounds., • Ability to deal with patient complaints with tact and diplomacy., • Ability to work with volunteers., • Comply with HIPAA and Confidentiality Policies and Procedures as they apply to the job., • Demonstrate full scope of Dentistry, including experience with adult and pediatric patients, ages 0-21., • Experience: 3-6 years of hands-on dentistry experience, with demonstrated competency in performing a variety of dental procedures independently, such as anterior and premolar root canal therapy, crowns, and removable prosthetics., • FQHC Experience: Work experience in a high volume Community Health Center (CHC) or Federally Qualified Health Center (FQHC) is strongly preferred., • Manage Patient Load: Efficiently manage a daily patient load of 16-20 patients, ensuring quality care and patient satisfaction. This number may change based on department goals., • Organizational Skills: Highly organized with the ability to prioritize tasks effectively. Capable of managing a busy patient schedule and meeting deadlines in a fast-paced environment. Detail-oriented and able to work independently with minimal supervision., • Adheres to all Harbor Community Health Center (HarborCHC) policies and procedures., • Observes all policies and procedures for the use of the time-keeping system, including attendance, tardiness, proper clocking procedure, overtime authorization, and that employee's nametag is visible., • Conducts self in a manner that represents HarborCHC’s core values at all times., • Maintains a positive and respectful attitude with all work-related contacts., • Provides excellent customer service., • Communicates regularly with his/her immediate supervisor about departmental and HarborCHC concerns., • Consistently reports to work prepared to perform the duties of the position., • Meets productivity standards and performs duties as workload necessitates. To perform the job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: • Provide Routine and Emergency Dental Services: Diagnose and treat dental conditions, develop comprehensive treatment plans, and perform both intra- and extra-oral examinations. Deliver general restorative procedures (e.g., composite and amalgam fillings), preventive care, crown and bridge construction, removable prosthetics, endodontic treatments, and oral surgeries. Initiate and interpret radiographs and laboratory studies. Work with an interdisciplinary team to deliver whole-person care. Stay abreast of new techniques, new equipment and be contemporary with the latest medical and dental discoveries., • Administer Anesthesia and Medications: Prescribe and administer anesthetics, medications, and treatment regimens as appropriate to meet patient needs., • Referral and Coordination: Refer patients to specialists or other healthcare providers for advanced care or specialized treatments when necessary., • Patient Education: Educate patients and their families on oral health, disease prevention, and proper dental hygiene practices. Communicate dental needs and treatment options with patients and their representatives in an objective, clear, and compassionate manner., • Supervision and Coordination of Dental Staff: Oversee and direct the activities of dental support staff to ensure effective delivery of patient care. Supervise Dental Auxiliary staff and provide guidance, mentorship, and support as needed., • Community Health Engagement: Actively participate in community health promotion, education, and disease prevention programs to promote oral health in the local community., • Staff Training and Development: Assist with in-service training and continuous professional development of dental department staff, enhancing skills, knowledge, and adherence to clinical protocols and best practices., • Student Training: Acts as an educator/preceptor for dental students, dental hygiene students, and dental assisting students who may rotate through HarborCHC dental office., • Compliance & Safety: Participate in safety, compliance, and quality improvement programs. Adhere to all federal, state, and local regulations and standards governing the delivery of care in a community health center environment, including infection control and prevention., • Patient Satisfaction: Foster a positive, compassionate, and welcoming environment for both patients and their families. Promote patient satisfaction by delivering high-quality care and addressing concerns in a professional and empathetic manner. Work with the Dental Director and Dental Office Manager to resolve patient complaints., • Mission Alignment: Support and contribute to HarborCHC’s mission and values through clinical practice, patient care, and team collaboration. · Our mission is to provide low-cost, comprehensive high quality health care and supportive services to those in our community who do not have access to medical care. · Our vision is "Improving the Health and Well Being of our Community" · Our Core Values consist of Integrity, Compassion, Excellence, and Diversity. · Employees must possess a strong commitment to the mission, policies, goals and philosophy of Harbor Community Clinic. HR PROCEDURAL REQUIREMENTS · Legal authorization to work in the United States. · Clear all post offers, pre-employment background screening, and education verification. · Must be vaccinated against COVID-19 or have a qualifying medical/religious exemption. · This is not intended to cover all aspects of your description as additional duties may be assigned. PHYSICAL REQUIREMENTS The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. While performing the duties of this job, the employee is regularly required to sit; use hands to manipulate objects, tools or controls; reach with hands and arms; and talk and hear. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust. Hours: HarborCHC is open Monday-Thursday 7:00am-7:00pm, Friday 8:15am-5:00pm, Saturday 8:00am-5:00pm with occasional overtime, or other shifts based on clinic need. This is a non-exempt position and any overtime must be approved by the Supervisor in advance. EQUAL EMPLOYMENT OPPORTUNITY STATEMENT HarborCHC does not discriminate in employment opportunities or practices on the basis of race; religion; color; sex/gender (including pregnancy, childbirth, breastfeeding or related medical conditions); sexual orientation; national origin; ancestry; physical or mental disability; medical condition; genetic information/characteristics; marital status/registered domestic partner status; age; sexual orientation; reproductive health decision-making; military or veteran status; use of cannabis off the job and away from the workplace; and any other basis protected by federal, state or local law or ordinance or regulation, or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. This policy applies whether the individual has or is perceived to have any of the characteristics protected by law or is associated with a person who has or is perceived to have any of the characteristics protected by law. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. DISCLAIMER The above statements define this position as it currently exists and are intended to describe the general content of and requirements for this job. They are not to be considered as an exhaustive statement of duties, responsibilities, or requirements and does not limit the assignment of additional duties at the discretion of the supervisor. HarborCHC is an at-will employer. In addition, HarborCHC may change your duties, compensation or hours, or transfer, reassign, promote, demote, suspend or otherwise change the terms and conditions of your employment (other than the at-will relationship), with or without cause or prior notice. Join our team of professionals dedicated to improving the oral health of our community while fostering a supportive environment for both staff and patients alike. Job Type: Full-time Benefits: • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Work Location: In person

Job Description Reports To: General Manager Requirements: Carry or lifting items weighing up to 50 pounds Pulling and pushing up to 150 pounds Frequent standing up and moving Frequently bending, stooping, and kneeling Willing to work on weekends, and/or holidays General Responsibilities: The Maintenance Supervisor oversees hotel maintenance, energy usage and many of the hotel’s safety and security programs. Hotel areas maintained under the direction of the chief engineer include public areas, guest rooms, support areas, machinery, equipment, and grounds. Primary Functions: Supervise the maintenance of the hotel so that there are no additional expenses or loss of business resulting from deferred maintenance. Review and be knowledgeable of information contained on circulate management reports. Implement and adhere to all Company purchasing procedures and controls. Protect the Company’s financial assets. Be knowledgeable on the safe use of tools, chemicals, supplies, and related materials. Use these materials safely and according to instructions. Use hotel supplies and materials efficiently. Promptly report to the General Manager and correct maintenance deficiencies that may have a negative effect on guest comfort and/or operating expenses. Promptly report and correct risks to guest, visitor and employee safety, security, and health to General Manager. Coordinate access to guestrooms and timeliness of guestroom maintenance with the housekeeping and front office departments. Be knowledgeable of hotel features, amenities, and services. Adhere to all company policies and procedures. Participate in job-oriented continuing education programs. Implement and monitor a formal, documented ongoing preventative maintenance program for all hotel’s major equipment and machinery. Implement and monitor a formal, documented ongoing maintenance program for all hotel guestrooms. Represent the hotel with enthusiasm, professionalism and businesslike appearance and demeanor to all hotel guests, clients, prospective clients, and agents, as well as, to the community. Adhere to all laws and regulations regarding workplace safety and health. Educate employees on such laws and regulations and actively promote their adherence to those laws and regulations. Specific Responsibilities Complete and post daily work checklists and special project checklists. Conduct daily tours of all hotel facilities to discover and correct maintenance deficiencies, conditions that negatively affect guest experience and conditions that risk the security safety or health of the hotel, guests, or other visitors. Including but not limited to, trash disposal in public areas. Report and investigate losses of company assets. Tactfully and professionally handle special guest situations and problems. Report guest comments to the general manager and the front desk staff. Respond to written and verbal work orders originating from the front desk, housekeeping staff and management. Deliver requested items to guestrooms, such as bedding, pillows, cribs, rollaway beds, towels, light bulbs and supplies when requested by the supervisor or front desk staff. Report the status of maintenance assignments to the front desk, housekeeping, and management. Repair and clean mechanical equipment. Perform preventative maintenance on mechanical equipment. Complete special projects, including but not limited to, painting, refinishing, plumbing, flooring, wall treatments, landscaping, demolition, construction, electrical, carpentry, refrigeration, and other projects. Repair and clean furniture, fixtures, and equipment in the hotel’s guest rooms, public areas, storerooms, offices, workshops, support areas, garage, and outdoor areas. Secure guestrooms, storerooms, mechanical rooms, and work areas. Secure hotel equipment and supplies. Maintain comprehensive records on guestroom maintenance and preventive maintenance. Complete other assignments and perform other duties as directed by management. Performance Standards: Annual performance evaluations are subjected to contributions of measurable value to hotel metrics and goals. Shift Schedule: This is a full-time role, scheduled for 5 days a week with 8-hour shifts. Availability on Friday, Saturday, Sunday, and Monday is required, as these are the hotel’s highest occupancy days. Two weekdays off will be scheduled and can be discussed during the interview process. While the position primarily operates on a fixed schedule, the ideal candidate should be available for occasional after-hours calls in the event of urgent maintenance issues or emergencies. We aim to respect work-life balance while ensuring the property remains fully operational and guest-ready at all times. This position is budgeted for 40 hours per week, typically scheduled in 8-hour shifts across 5 days. Additional hours may be required on occasion to address urgent or time-sensitive maintenance issues.

Job DescriptionSalary: $90,000 $120,000.00 job captain II SUMMARY This position will work closely with the client and internal project team to complete sets of project contract documents, interior finishes and materials including construction drawings, component and equipment schedules and specifications. This person will be highly organized and well-versed in the project design process to provide support in the development of all design and project phases. RESPONSIBILITIES Project Expertise • Monitor project schedules and budget hours spent vs completion percentages., • Prepares and ensures accuracy of design construction documents., • Coordinate directly with clients on the project requirements and design aesthetics, • Estimates hours, scope of work and prepares project-based work authorizations for review with Project Manager, • Reviews code requirements, city requirements and coordinates with Project Manager and Designer to implement and meet requirements., • Working knowledge of exiting and ADA codes, • Working knowledge of navigating through the city, • Possesses working knowledge of the city for the plan check process, • Has diverse knowledge of interior architectural principles and practices, uses advanced techniques and is responsible for finish plans, specifications, and material approval, • Participates in the construction administration of project assignments including quality control Communication and Collaboration • Assist project manager in planning project budgets, schedules, staffing, etc., • Assist project manager in reviewing current and future workload to determine staff assignments., • Monitor performance of the project team and provide assessment to project manager., • Provide information, development support and training to team members to enhance the skills of the project team members., • Assist project manager in preparing proposals and evaluating scope of work for new projects., • Client focused, communication with attention to detail, • Clearly communicates and provides appropriate direction to General Contractor(s) and Subcontractor(s) regarding discrepancies in the field and collaborates with Project Manager to determine successful solutions., • Communicates effectively with clients, actively striving to maintain a strong, positive relationship with each contact., • Proactively works with consultants, contractors, fabricators, specification writers and regulatory agencies to meet overall project objectives., • Working knowledge of customer service and customer relationship management (CRM)., • May mentor a small team of designers on a project basis. Process Development and Coordination • Oversee the development of detailing required to convey the intent of the construction documents, • Monitor progress and quality of drawings, • Verify compliance with office standards., • Coordinate changes and corrections with team members, • Maintain project files. Compile record file of drawings at project milestones. Document all communications with outside parties. Document and distribute all critical project information to appropriate team members and outside parties., • Provides project team coordination for the finished plans, specification, and material selections required for construction., • Coordinates work with other disciplines and consultants to meet overall project objectives., • Conduct research, coordination, documentation, and submission of all plan check corrections with applicable city agencies and engineers., • Coordinate vendors such as A/V, cabling, and security to correctly document required requirements in construction documents. SUPERVISORY RESPONSIBILITIES • Oversee Designers and Production team. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE • Bachelor's degree (B.A.) or Bachelors of Architecture (B.Arch) from college or university or 5-8 years progressive relevant experience and training or equivalent combination of education and experience., • 5+ years of experience in corporate interiors preferred., • Strong skills in Revit, AutoCAD, Illustrator, Photoshop, SketchUp. 3DMax is a plus. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee must frequently lift and/or move up to 10 pounds and occasionally up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. LIFE AT SAA At our heart, we are a creative firm, and we have fun with what we do. We are a tight knit community, supporting each other in and out of the office. We understand work/life integration and encourage our employees to bring their personal experiences and passions into their roles. Innovation is the key to our success and that comes from everyone sharing ideas and exploring ways to make the industry, firm, and your job better. We also believe the best ideas come from those passionate about their company and continually look for ways to bring enjoyment into the workday. We offer full benefits and fun employee perks including: Medical, Dental and Vision Plans (including 2 no cost to the employee medical options and dependent coverage is available) 14 paid holidays per year Tiered Paid Time Off (PTO) starting at 18 days/year 401k Plan Casual work attire, complimentary snacks, drinks, and office events. There is also free parking at select office locations. Summer Flex Schedule (Half Day Fridays) WORK ENVIRONMENT Were team oriented and have fun while designing amazing spaces! The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. POSITION TYPE/EXPECTED HOURS OF WORK This is an Non Exempt Full-Time position. Typical days and hours of work are Monday through Friday to be discussed with direct supervisor. TRAVEL Travel may include attending off-site meetings and work sessions in other local SAA Offices. Mileage will be reimbursed at a predetermined market rate. Individuals must possess a valid drivers license with a good driving record and have reliable transportation. AAP/EEO Statement SAA is an equal opportunity employer. Applicants are considered without discrimination with regard to race, color, religion, sex, national origin, age, disability, veteran status or other statuses protected by state, local or other applicable laws. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Payroll Admin - TalentZok OVERVIEW Are you looking for a new career opportunity with an exciting company?! Then we've got the right team for you! In this role, you're responsible for the duties listed below. Immediate opening for a Payroll Admin in Long Beach, CA who possesses: • Full Cycle Payroll Experience - 5+ yrs. (Construction, Manufacturing, Aerospace or Engineering), • Union and Multi-State a big plus, • Sage, Dayforce or something similar with MS Office Suite (Excel, Outlook, Teams) Email resumes to or call 424.488.7104 FULL DESCRIPTION: The ideal candidate for the team will be hard working professional able to undertake a variety of support tasks and work diligently under pressure. This person will be comfortable working with high degree of attention to detail and discretion as well as incorporating new and effective ways to achieve better results. The selected candidate will be responsible for: • Contact regional timekeeping personnel to track timesheet submittals company-wide to ensure field timesheets are submitted on time and are accurate, • Review and ensure that data entry of all timesheets is complete and balanced in time to complete weekly payroll processing by the established deadline, • Use custom software to prepare weekly Union and Non-Union payroll and review data to ensure that the hours are correct and the numbers balance with time entry data, • Follow an established process to create weekly and monthly payroll reports for various entities, including monthly Union Reports., • Follow-up with any payroll questions to determine if corrections need to be processed., • Identify payroll discrepancies and use best judgement to resolve them. Refer more complex problems to Payroll Supervisor or the Manager, • Respond appropriately to requests from both internal and external departments., • Build positive relationships with company and customer personnel at multiple worksites and provide analytical support related to time and expense functions when requested, • Maintain employee confidentiality in record keeping and information subject to privacy laws The selected candidate will also possess: • Must possess excellent critical thinking skills, • Must be able to prioritize work and work in an organized manner, • Knowledge of state and federal privacy of information laws and requirements, • Calculate and review data with attention to detail and accuracy, • Union and non-union payroll and general understanding of Certified payroll a plus, • Advanced proficiency with Microsoft Excel, • Perform basic math: addition and multiplication as well as sum, average and sort data, • Experience with Sage300 (Timberline) construction software a plus, • Ability to effectively communicate both written and orally to resolve payroll inquiries and discrepancies., • Knowledge of state and multistate wage and hour laws Salary Range: $30-$37/hr For immediate and confidential consideration, please email your resume to or call 424.488.7104. More information can be found at Company DescriptionTalentZok was founded in 2008 and has been repeatedly recognized as one of San Diego County's fastest growing businesses. In 2022, we were named Business Journal's 'Best Places to Work'. Even as our competitors are scaling back and laying off staff, TalentZok is expanding to new markets and hiring additional staff in existing offices.TalentZok was founded in 2008 and has been repeatedly recognized as one of San Diego County's fastest growing businesses. In 2022, we were named Business Journal's 'Best Places to Work'. Even as our competitors are scaling back and laying off staff, TalentZok is expanding to new markets and hiring additional staff in existing offices.

Job Description Job Summary The Deputy Chief Credit Officer is responsible for providing direct oversight in the management of the Bank’s lending function through participation in various committees, mentorship of the loan officers and administration of all lending function processes and portfolio risk management practices. This position is a member of the Lending Committee and is responsible for reviewing and approving loan submissions within the designated lending authority. Essential Duties • Oversee the Bank’s lending function, portfolio management, loan policies/procedures and daily lending process functionality. Directs credit related processes and philosophy for consistent analytics within the loan underwriting functions., • Deputy Chief Credit Officer must set a standard for loan officers and Credit Administrators that encourages their decision making abilities through positive criticism and training, which helps with their overall personal development and performance at the Bank., • Review and approve loan submissions, including Residential Lending submissions, within lending authority and assist loan officers with questions regarding our loan products, structuring, evaluating and granting new and modifying existing loans and providing solutions to particular situations with loan customers regarding loan requests, all of which are to provide the bank with a solid and profitable loan portfolio., • Provide timely responses to branch loan approval requests granted that the request is complete., • Provide instructional and mentoring advice to loan officers and lending staff as to the proper structuring, pricing and presentation of loans for approval., • Provide direct management for the environmental risk and appraisal procurement/review personnel and processes., • Responsible for the process of reviewing and approving draw requests and inspection reports for the Bank’s construction loan portfolio., • Responsible for reviewing and approving periodic reimbursement requests received from parties contracted to complete insurance damage repair projects., • Manage Lending Committee members providing oversight for reviewing and recommending loan requests that require combined member authority., • Provide direct management of Electronic Card Services group to approve limits, sign off on annual reviews and provide guidance to the credit risk associated with ACH, RDC, mRDC, Credit Cards and Merchant Services offered by the bank beyond the identified Operational Risk., • Manage periodic reviews (as required or scheduled under Tier Risk program) of approved limits and risk thresholds within these client relationships for prudent management oversight., • Manage lending related audit responses to identify any compliance or credit issues that may arise from time to time as a result of the processes in handling lending requests. Serve as the direct liaison between Credit Administration and Loan Audit to discuss ongoing risk assessment and audit findings., • Communicate with third party auditors and Regulatory Agencies, as necessary., • Participate in various committees and meetings as designated by the Chief Credit Officer – may include Credit Administration Committee, Large Borrower Committee, CRE Concentration, ALLL etc., • Assist in various portfolio risk management assessment strategies and participate in the review and discussion of interest rate risk, market risk, industry risk, ALLL, stress testing, etc., • Provide oversight for Loan Documentation Unit. Direct processes and policies related to timely and accurate production of loan documents., • Provide oversight for Credit Administration Services. Direct processes and policies related to lending training, records management, servicing, reporting, etc., • Provide oversight to the management of external legal engagement including loan documentation preparation and amendments, as necessary., • Provide oversight for Escrow Department processes and policies related to title company engagement, loan funding/closing, etc., • Provide oversight to the Special Assets Department. Engage in the timely workout, charge off and risk assessment for those loans within the department’s purview. Complies with all State and Federal Banking regulatory requirements, including but not limited to: BSA, Anti-Money Laundering OFAC, CIP, Financial Elder Abuse Reporting, Sexual Harassment, Information Security and privacy requirements. Acts as the control point for the office to ensure that all CIP, BSA, OFAC requirements, procedures and time frames are met. Non-essential Duties • File Review Required Knowledge • Various regulations as appropriate to the processing of loans Required Knowledge • Bank Secrecy Act (BSA), • Fair Housing Act, • Real Estate Settlement Procedures Act (RESPA), • Regulation AA (Unfair or Deceptive Acts or Practices), • Regulation B (Equal Credit Opportunity), • Regulation CC (Expedited Funds Availability Act), • Regulation E (Electronic Funds Transfer Act), • Regulation P (Privacy Act and Safeguarding Customer, • Uniform Commercial Code (UCC), • California Civil Code, • Fair Debt Collection Practices, • Regulation Z (Truth in Lending Act), • Regulation BB (Community Reinvestment Act), • Regulation DD (Truth in Savings), • US Patriot Act, • Regulation O (Federal Reserve Act and Federal Deposit Insurance Act), • Regulation C (Home Mortgage Disclosure – HMDA), • Regulation U (Governs Margin Securities) Basic Knowledge, Skills and Abilities • Clear understanding of the English Language (Spoken & Written), • Microsoft Office Products (Excel, Word, Outlook), • Laserfiche imaging application, • Financial Tools CASH application, • Jack Henry & Associates core operating system, • Core understanding of Credit Policy and Loan Documentation & Procedures Manuals, • Basic Mathematics Skills, • Customer Service Skills, • Strong typing skills, • Strong time management and organizational skills, • Critical Thinking, Judgment & Problem Solving Skills, • Ability to actively listen & learn, • Ability to communicate with Supervisors and Co-workers respectfully, • Ability to effectively deal with unpleasant, angry or discourteous people Equipment Operated • Desk top Computers, • Standard Office Equipment (copiers, scanners, fax machines) Physical Requirements & Work Environment • Requires sitting for prolong periods of time., • Requires lifting up to 15 lbs., • Office setting w/controlled temperature Education and Experience: • Bachelor’s Degree or equivalent work experience required, • 20+ years loan structuring, documentation and loan servicing experience, • Prior electronic credit product experience preferred As a part of the Bank’s internal control systems, employees holding sensitive positions are required to be absent from their duties for a minimum of two consecutive weeks each year. This position has been deemed to meet the test for a sensitive position, and therefore you will be required to meet the minimum absence requirement each and every year. This job description is not intended to be all-inclusive, and employees will be required to perform additional related work duties as assigned by their immediate supervisor and/or management. Farmers and Merchants Bank of Long Beach reserve the right to revise or change job duties and responsibilities as the need arises. This job description does not constitute a written or implied contract of employment. October 16, 2025

Job Description JOB TITLE: Development Manager DIVISION/UNIT: Century - Housing Division SUPERVISOR: Associate Director and Vice President of Housing Development GENERAL SUMMARY: The Development Manager will be an entrepreneurial, innovative and creative member of a, high-performing and expanding housing development business unit within the Century Housing organization that delivers on Century’s mission of investing in homes and communities so that low income individuals and families may have a dignified living environment, achieve economic independence, and enjoy healthful and vital places to live and work. The Development Manager will be a key member of Century’s development team, requiring both short and long-term strategic thinking, planning abilities, communication skills, organizational skills, project management skills, financial underwriting and analytical ability, and vision to help advance Century’s mission through the development and preservation of affordable housing. The Development Manager will be responsible for strategically managing a range of real estate development activities related to the acquisition and development of affordable housing and community development projects. In addition, the Development Manager will be resourceful, pro-active and self- motivated person with the ability to balance vision and mission with practical understanding of affordable housing and real estate development constraints. Responsibilities span across the development process from deal sourcing through project completion and ultimate transition to property and/or asset management. Century’s pipeline is anticipated to primarily include the following opportunities: • New Construction and Rehab, • New acquisition/rehab, preservation and development opportunities, • Strategic joint venture opportunities Working under the direction, supervision and support of the Associate Director of Housing and Vice President of Housing, the Development Manager will be responsible for coordinating, communicating, and managing all aspects of our real estate development activities. Fully engaging within the Century organization, the Development Manager is responsible for coordinating and managing all stages of affordable housing development for multiple projects at any given time and ensures that objectives of each project are accomplished within prescribed timeframes and funding parameters. In furtherance of these efforts, the Development Manager will interface regularly with key stakeholders, both inside and outside of Century, to shape efforts, secure necessary support, and deliver on Century’s strategic plan. Essential Duties and Responsibilities: Take a lead in securing new projects that satisfy acquisition criteria to make recommendations on development and preservation activities. Source new deals that satisfy acquisition criteria, utilizing a variety of methods including, but not limited to, broker solicitation, data mining, and responding to RFPs and RFQs. Prepare financial, physical, and entitlement feasibility analyses of prospective acquisitions. Engage internal stakeholders to obtain input and approvals Maintain project files, logs and contracts Perform standard and property-specific due diligence. Engage community stakeholders and secure support for prospective projects. Provide public presentations if required. Represent Century before public agencies, elected officials, community groups and financial institutions in soliciting support for new projects. Secure all necessary entitlements and permits for real estate development. Prepare successful funding applications for low income housing tax credits, tax exempt bonds, private, local, state and federal soft sources of finance. Research, understand and secure funding to support feasibility, site acquisition, pre-development, construction and permanent financing phases of development. Work with public and private lenders to secure predevelopment, bridge, construction and permanent financing. Evaluate, engage, and manage architects, engineers, general contractors, construction managers, and other real estate development consultants. Negotiate investment terms with equity partners in the syndication of low-income housing tax credits and other financing programs. Negotiate terms with lenders on construction and permanent financing. Monitor and evaluate all phases of schematic design, design development and construction documents. Coordinate and manage the flow of due diligence for loan closings. Manage project budgets through use of job cost accounting. Interface with finance and accounting teams to submit loan draws and manage insurance. Monitor construction and ensure that projects are delivered to Century Development Standards, on time and on budget. Manage payment applications and change orders. Ensure compliance with prevailing wages, HUD Section 3, and other mandated requirements, to the extent applicable. Collaborate with Asset Management, Property Management and Resident Services team to secure input on prospective projects and share progress information on existing projects. Ensure a smooth transition to operations. Other duties as required and/or assigned Required Knowledge, Skills and Abilities • Proven experience in affordable housing finance and/or real estate development, • Knowledge about affordable housing loan and grant programs along with the tax credit program, both 4% and 9% credits, California specific affordable housing knowledge and experience, preferred., • Strong financial acumen to underwrite and model new opportunities, • Familiarity with HUD financing and Section 8 program., • Ability to manage various planning, infrastructure and long-range development efforts as part of a master-planned community., • Ability to source, structure, and deliver new affordable housing deals., • Ability to manage multiple projects simultaneously., • Excellent oral and written communication., • Organization and time management skills., • Ability to work independently and problem solve. EDUCATION AND EXPERIENCE: Minimum Requirements: Applicants should have three (3) plus years of experience in affordable/real estate development and/or financing of multifamily housing. Position requires strong knowledge of affordable housing real estate development, affordable housing funding programs, real estate finance, construction, and permitting/entitlement processes, and community engagement. Graduate degree in planning, business or related field highly desirable. Compensation and Benefits: Competitive salary and excellent employee benefits package, including medical, dental, vision, 403(b) plan with company match, life insurance, flexible spending account, paid time off and paid holidays. Salary range $120,000 - $140,000.

Job Description POSITION SUMMARY: Engaged in variety of electrical test on magnetic parts, subassemblies, final verification of electrical requirements, and to ensure unit functions in accordance to drawing electrical specifications or to determine cause of unit failure. POSITION RESPONSIBILITIES: • Review manufacturing traveler instructions for electrical requirement., • Test single and three phase transformers and inductors in accordance with test specifications., • Ensure that all electrical measuring equipment such as digital voltmeter, frequency meter, Inductance Bridge, digital ohmmeter, auto-multiple tester, etc. are calibrated., • Ensure that each part conforms to drawing electrical requirements., • Perform pre-pot electrical verification prior to encapsulation parts., • Perform quality conformance inspection for all completed parts to verify conformance to specification., • Initiate a non-conformance report each time a part is found non-conformance to the requirement., • Maintain and clean areas around test equipment., • Lead daily testing of transformers and controls., • Ensure ongoing adherence to internal and external standards., • Troubleshoot and diagnose problems., • Utilize PC and necessary hand calculations to prepare files and forms for transformer test and draft Certified Test Reports., • Prepare detailed test plans for scheduled transformers based on input from the customer specification, test specification, nameplate, control drawings, standards, equipment instruction manuals and work instructions., • Interface with engineering as necessary for clarifications or to obtain additional information. Represent the test department in a professional manner., • Maintain & Repair test equipment as necessary. Ensure equipment is calibrated and schedule upcoming calibrations. Monitor condition of test equipment and test fixtures., • Recognize opportunities for improvement and take action., • Ensure engineering changes are acted upon as required and communicate non-conformances via quality assurance department., • Provide work leadership and train test technicians. Teach equipment setup, connections, principles of operation, maintenance, and diagnostics. This position has no supervisory responsibilities. MINIMUM REQUIREMENTS: High school diploma or general education degree (GED) six months of related experience or training or an equivalent combination of education and experience. • Must have the basic knowledge of transformer construction, testing and troubleshooting, • Must have the basic knowledge how to use various type of test equipment such digital multi-meter, ohmmeter, volt meter, wattmeters, megohmmeter, oscillators and power amplifiers., • Must be able to perform each essential duty satisfactorily., • Must have the mental and visual ability to read and interpret documents such as work instructions, schematic diagram, safety rules, operating and maintenance instructions and procedures manuals., • Must have the knowledge of basic electricity both alternating and direct current., • Must have the mental ability to perform basic mathematic., • Must have the physical ability to move parts weighing 25 pounds., • Ability to communicate effectively, work effectively in a team environment., • Ability to apply common sense understanding to carry out instructions furnished in written or oral This position is in contact with supervisor, production manager, and human resources. PHYSICAL EFFORT: This position may occasionally be required to lift up to 25 pounds. Must be able to remain in a stationary position 50%. Position needs to move about around the test area, and throughout production plant. The person in this position frequently communicates with Supervisor and production manager who have inquiries; therefore person must be able to exchange accurate information in these situations. The person will require the ability to read materials including safety policies and procedures. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. SAFETY: • Must have the physical ability to perform this job safely without endangering the health or safety of self or others., • Employees are required to wear Personal Protective Equipment (PPE) such as clothing, gloves, goggles, or other garments or equipment to protect the employee’s body from injury or infection., • Determines appropriate action beyond guidelines; Reports potentially unsafe conditions of equipment., • Ensure compliance with Magnetika employee health and wellbeing programs., • Inspect equipment, manufacturing area and safety equipment to find and correct potential hazards., • Ensure compliance with environmental and Occupational Safety and Health Administration (OSHA) regulations. Works throughout the premises as needed. Work environment may have noise levels ranging from medium to quiet. The environment for this position varies from clean, climate controlled to manufacturing. This job description portrays in general terms the type and level(s) of work performed and is not intended to be all-inclusive or to represent specific duties of any one incumbent. The knowledge, skills and abilities may be acquired through a combination of formal schooling, self-education, prior experience, or on-the-job training. The company reserves the rights to modify, supplement, delete, or augment the duties and responsibilities specified in the position description, in the company’s sole and absolute discretion. Duties other than those expressly specified may be assigned from time to time. Monday - Thursday 7:00 am - 3:30 pm, Friday 6:00 am - 2:30 pm

Job DescriptionSalary: $24 DOE SUMMARY: The Electrical Designer Level II is responsible for creating designs for the electrical and engineering department. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Know and have a thorough understanding of how signs are fabricated and installed., • Good understanding of materials, methods of construction, production, and installation., • Understands OD workflow and can design with production methods and cost savings in mind whilst meeting client requests., • Meet with other departments to minimize the number of errors or in-house discrepancies when submitting designs without a supervisor., • Produce concept designs based on client-supplied artwork, direction from sales account executives, and their own record., • Produce working drawings in a way that all details of the sign are made clear to the client, permitting, estimating department, production, and installation team., • Advanced Illustration skills in Illustrator and Photoshop to accurately show the finished sign., • Attend company and department meetings., • Demonstrate commitment to company's core values., • All other duties as assigned. QUALIFICATIONS: • OD Electrical Level I required or similar equivalent/ background., • Good understanding of electrical design., • Good math and measuring skills with various methods/tools, • 3D modeling capabilities preferred, Solidworks or AutoCAD., • Ability to work independently and in a team environment., • Exceptional time management and verbal/written communication skills., • Ability to handle high-volume workload promptly., • Strong attention to detail., • Ability to follow directions and is a quick learner., • Ability to communicate professionally. SUPERVISORY RESPONSIBILITIES: This job has no supervisory responsibilities. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read, analyze, and interpret general business communication such as emails, letters, memos, notes. Ability to write business correspondence. Ability to verbally present information and respond to questions from Account Executives, managers/supervisors, clients, and colleagues. MATHEMATICAL SKILLS: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. CERTIFICATES, LICENSES, REGISTRATIONS: None. PHYSICAL DEMANDS: The employee is occasionally required to walk, sit, and reach with hands and arms. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually loud.

Job Description At Griffith Company, we recognize that people are our most valuable resource. We nurture that resource by fostering a work environment that encourages communication, respect and recognition. In this environment, Griffith Company employees flourish, taking their careers to new levels. In addition to offering a 120+ year history of quality, safety and excellence, Griffith Company has a dynamic, exciting and supportive culture where opportunity for growth abounds. We are currently seeking a Site Safety Manager for the Burbank Airport. The Site Safety Manager’s duty is to monitor and assess onsite activities, providing guidance and oversight to support safe and efficient operations. Through leadership and collaboration with the project team, the Site Safety Manager shall continuously promote a strong safety culture, reinforce company values, ensure adherence to best practices, effective communication, personal accountability, and employee development. Essential Functions • Conduct job-site orientation and safety training for all personnel, including subs., • Support the project team in complying with IIPP, SSSP, and specific contract language., • Assist in observing and guiding subcontractors and the project team to manage safety risks., • Lead accident investigations, prepare detailed reports, and ensure corrective actions are implemented by the project team., • Coordinate weekly Toolbox talks and RCA meetings with site supervisors., • Coordinate emergency response and ensure timely medical care for personnel., • Maintain jobsite postings in compliance with OSHA/Cal-OSHA regulations., • Conduct safety audits, inspections and communicate them to the project team and subs., • Ensure operations comply with CA MUTCD standards and temporary traffic control plans., • Assist the Project Manager or Engineer with safety submittals, reports and documentation., • Document daily safety inspections and maintain accurate project safety logs., • Demonstrate skills in managing compliance with Dig Alert (811) permits per CA GC4216., • Manage procurement, distribution, and training related to PPE and other safety materials., • Attend or host monthly (all hands) safety meetings held by the owner or agency., • Perform or assist record testing of noise, airflow, and air quality. The individual must possess the following knowledge, skills and abilities and be able to explain and demonstrate that he or she can perform the essential functions of the job, with or without reasonable accommodation, using some other combination of skills and abilities. • Minimum of 10 years of heavy Civil construction experience, • Minimum of 5 years of Safety experience in the construction industry as a safety professional or supervisor with safety responsibility. Airport construction is strongly desired., • Possess knowledge of federal regulations, Title 8 CCR safety standards, and the Manual on Uniform Traffic Control Devices (MUTCD)., • Certified in OSHA 30-hour Construction (Valid, unexpired OSHA 30 card within the last 3 years), • Certified OSHA 10 Hour and 30 Hour Outreach Instructor strongly desired., • BCSP Certification (STSC, CHST, GSP, OHST, SMP, SMS CSP, ASP) desired., • Current First aid CPR training is required. Qualified “Trainer” in Red-Cross or Medic-FA is a plus., • Demonstrate competency in their Cal/OSHA-defined role, able to interpret lookahead schedules, identify high-risk activities and potential hazards, and recommend mitigative or corrective actions to the project management team., • Skilled in documenting and reviewing safety activities, including observations, inspections, RCA and safety meetings, and the preparation of THAs, PTPs, and other critical safety records, in both electronic and hard copy formats., • Possess solid interpersonal skills, must be able to work well with the construction project site team, owners and construction management firms., • Moderate Proficiency in Microsoft Excel, Power Point, and Word., • Efficient recordkeeping and submittals of required project safety documentation.Physical Demands, • Sitting or standing for long periods during study periods, meetings, seminars and training sessions., • Physically examine various operations of work and perform on-site visual evaluations in real-time., • Ability to lift, carry, push, pull up to 50lbs., • Walk job sites and other locations including but not limited to elevated heights., • Effectively communicating in various work environments using verbal, electronic, and nonverbal methods., • Be able to effectively train employees through safety toolbox talks or other capable means., • Lifting and carrying of training and clerical materials and safety equipment., • Must possess the ability to safely operate a motor vehicle for the purpose of traveling to job sites, attending training, meetings and conducting other company business. Must possess and maintain a clean driving record in compliance with state and federal regulations is required. In addition to offering a comprehensive benefits package for all employees — including a superior health benefits package — Griffith Company also offers generous performance-based compensation. As part of an Employee Stock Ownership Plan (ESOP) Corporation, Griffith Company employees have the opportunity to directly and financially benefit from the Company's success. Other benefits include vacation time, sick days, paid holidays, and a 401K program with match. (Benefits are subject to eligibility requirements) Annual Salary Range: $98,000 - $140,000. Relocation assistance will be provided to candidates outside of the local area on a case-by-case basis. Visit us at: Griffith Company is an equal opportunity employer and an employee-owned company. Important Notice to Staffing Agencies/Recruiting Firms Griffith Company will not accept unsolicited resumes from any sources other than directly from a candidate, Griffith Company employee or any of our external recruiting partners whom we already have an executed written agreement with. Any unsolicited resumes sent to any of the following will be considered Griffith Company property: Griffith Company mailing address, fax machine or email address; Griffith Company employees; or to Griffith Company's applicant/candidate database. Griffith Company will NOT pay a fee for any candidate placement resulting from the receipt of an unsolicited resume. Griffith Company will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. Agencies must obtain advance written approval from Griffith Company’s Human Resources team to submit resumes, and then only in conjunction with a valid fully-executed contract for service and in response to a specific job opening. Griffith Company will not pay a fee to any Agency that does not have such agreement in place. Agency agreements will only be valid if in writing and signed by Griffith Company’s CEO, Executive Vice President or Human Resources Director. No other Griffith Company employee is authorized to bind Griffith Company to any agreement regarding the placement of candidates by Agencies. Powered by JazzHR ScekiVDMB4

Job Description Position Description: Project Inspector / Construction Manager III will report to the Supervising Construction Inspector. -This position is responsible for performing a combination of the following essential job functions: inspects a variety of projects including but not limited to permitted and other various projects as assigned by the Program Management Office (PMO) or their designee. -This position will ensure compliance with permitted, and Division of the State Architect (DSA) approved plans; inspects construction related activities to ensure proper interpretation of engineered construction plans; reports variances and documents inspections; responds to inquiries and complaints from PMO, Personnel, or external agencies. -Performs continuous inspection on one or more projects; identifies, reports, resolves minor issues impacting assigned project; ensures approved materials are received and correctly implanted within the project; coordinates testing of materials when necessary; performs calculations from the plans verifying locations, grades and depth of utilities within the project; identifies non-compliant work and takes appropriate action to bring back into compliance in The Field Act (AB 1545). -This position will ensures all changes and/or modifications are noted on the final plans; has general knowledge of code requirements; makes photographic documentation of the progression of the assigned project. Minimum Required Qualifications: 8 years' experience in Construction Management of Commercial and/or Public Facilities, preferably including Educational Facility Construction. • BS or BA in Architecture, Engineering, Urban Planning, Construction Management, or a closely related field. 4 years additional qualifying experience in excess to the minimum stated above, may be substituted for the required education., • DSA Class 1 Inspector Certification (Active)., • Experience with Division of the State Architect (DSA) construction/design processes., • 1 year of experience in the supervision or inspection of engineering construction work., • Ability to read and interpret complex construction blueprints., • Experience with using programs such Microsoft Office and web-based program management software. Preferred Qualifications: **Experience utilizing Building Information Modeling (BIM) **Experience with Leadership in Energy and Environmental Design (LEED) certified projects and/or the Collaborative for High Performing Schools (CHPS) **Experience in a public higher education capital improvement program. **Experience in alternative delivery methods. **A valid Certified Construction Manager (CCM) credential by the Construction Manager Certification Institute (CMCI) Job Posted by ApplicantPro

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Training & development, • Vision insurance, • Competitive salary, • Employee discounts, • Familiarity with, and a working knowledge of related standards from the American National Standard Institute (ANSI), NACE International (NACE), Society for Protective Coatings (SSPC), NSF International (NSF), American Society for Testing and Materials (ASTM), etc., • Familiarity with but not limited to standard test practices for coating work surface preparation techniques, coating inspection instrumentation, measurements of film thickness, protection of surfaces, use and application of fillers, adhesion testing, spark testing, etc., • Working knowledge of the Cal/OSHA Construction Safety Orders and applicable confined space regulations., • Applicable SSPC & NACE Level 2 or 3 certifications with a minimum of 10 years experience. NACE Level 2 must be under the supervision of a NACE Level 3 supervisor who will review and sign off on reports., • Ability to interpret plans, specifications, special provisions and other contract documents., • Ability to independently identify potential problems and propose solutions., • Previous experience on inspection of coating work related but not limited to penstocks, valves, storage tanks, waterlines and bridges., • Knowledge of cathodic protection systemsRoles and Responsibilities:, • Under the oversight and direction of Department Section Head, Construction Inspectors, Resident Engineers, Area Supervisors or Consultant Construction Managers on projects requiring a coating inspector., • Preparation of inspection reports., • Perform inspections of coating works and the related practices such as but not limited to surface preparation, film thickness, protection of surfaces, application of fillers, adhesion testing, spark testing, instrument verification, etc.; perform oversight and enforcement of compliance with the contract documents for the coating of various Department waterworks, bridge, and flood control projects/facilities being constructed/restored by contractors under contract with the Department., • Respond to complaints and inquiries from the public, elected officials, other agencies, Project Management Division III staff and other affected Department Divisions., • Establish and maintain effective working relationships with Department staff.

Job DescriptionSalary: $95,000 - $148,000 PGH Wong Engineering, Inc. has a proud and lengthy history of delivering innovative, challenging, and complex projects. PGH Wong was established in 1985 on its extraordinary foundation in systems engineering and is now a full-service engineering, architecture, construction management, and program/project management consulting firm for public and private entities across the nation. This Mechanical Electrical Plumbing (MEP) inspector position will be based in West Los Angeles and on project sites in the area. Responsibilities include but are not limited to the following: • Visits construction sites and inspects each stage of construction up to completion. Interpret plans, specifications, and codes (general and specific to MEP) and verify that contract work is performed in accordance with them. Assist in obtaining approved designs and permits from utility companies for services to construction sites., • Monitor construction sites for safety violations. Prepares Non-Conformance Reports when work is not performed to the approved standards. Maintains daily activity logs and reports., • Review or prepare interim progress reports for contractor payments. Monitor contractor testing activities. Prepare reports on labor, material, and equipment on site. Determine construction conforms to plans and specifications; if not, issue Non-Conformance Reports for corrective action., • Assist in maintaining, supporting, and promoting a safe work environment while complying with the projects safety rules, policies, and procedures., • Coordinates preparation of inspection cost estimates and maintenance records., • Arranges, coordinates, and oversees technical inspections such as electrical, mechanical, landscaping, soil testing, concrete, and asphalt mixes, and reinforcing steel for conformance to specification requirements., • Coordinates test laboratory activities and compares verifications of test results with results from the contractors laboratory., • May allocate inspection resources and supervise inspectors., • Attends various meetings as needed., • Perform other duties as may be required. Qualifications and Experience: • Approximately five (5) years of MEP rail inspection experience for Associate positions, approximately ten (10) years of experience for Senior and Lead positions which reflect a progressively increasing level of responsibility on complex projects as a General Contractor, Building Construction Supervisor, Building Inspector of large commercial or industrial construction projects, heavy construction projects, transportation, or transit construction projects for the appropriate disciplines including utilities, civil, architectural, structural, electrical, mechanical and trackwork., • ICC Certificate of Reinforced Concrete or Masonry, ACI Registered Contraction Inspector License, comparable Deputy Inspection License for a county or city agency. NICET certification, or other alternative certification form an acceptable nationally recognized organization, is highly desirable where applicable to the Inspection of that particular trade., • Knowledge of OSHA safety regulations and Cal-OSHA/OSHA 30 training certification, or will obtain certification., • Able to read plans and have a good understanding of project specifications., • Must be able to interpret and implement company-mandated safety policies. Skills and Competencies: • Must be able to submit written reports and documentation., • Good organizational skills., • Good Computer skills. We are an equal opportunity employer, dedicated to a policy of non-discrimination in employment on any basis including race, color, sex, gender, age, disability, religion, national origin, political belief, veteran status, sexual orientation, gender identity, domestic partner status, marital status, disability, weight, height, or AIDS/HIV status.

Job Description Site Safety Technician – ARB, Inc. Summary Ready to make a real impact where safety meets the field? ARB, Inc. is seeking a dedicated Safety Technician to join our team! In this role, you’ll spend the majority of your time in the field—leading inspections, promoting safe work practices, and ensuring compliance with OSHA and other key regulatory standards. If you have a passion for safety and thrive in a hands-on environment, we want to hear from you. Join a company that puts people and protection first—apply today! ARB, Inc. is looking for a Safety Technician who is able to dedicate the majority of their work hours in conducting field inspections to ensure adherence to safety standards and regulations. This individual must have knowledge of OSHA standards and all other applicable agencies (EX: ANSI, NIOSH, AWEA) related to safe work practices and requirements. Functional Requirements • Responsible for performing field safety audits., • Perform accident & incident investigations and reporting as directed., • Assist in documentation collection while in the field., • Assist in training functions., • Investigate instances of non-conformance and facilitates the determination of the root cause., • Provide input to management., • Ensure that federal, state, company, and site-specific policies and procedures are enforced., • Identify and suggest the resolution of problems promptly., • Coordinate multiple tasks simultaneously., • Perform monthly and quarterly inspections on tools and safety equipment., • Communicate effectively in front of large groups., • Practice safety rules., • Follow verbal and written instructions., • Safe use of hand & power tools., • Report to and assist immediate supervisor., • Perform quality work as determined by project specifications., • Accountable for all tools and materials at the end of your shift., • Able to lift and carry up to 50 lbs (assistance recommended for heavier loads)., • Work extended hours on foot, including on uneven or rough surfaces. Mobility Barriers to Access Job Site: • Uneven ground level, • Obstructed pathways, • Work performed at low and/or high elevations, • Predominately outdoor climate, • May be exposed to extreme hot or cold weather, excessive humidity, rain, etc., • Various noise levels caused by tools, machinery, equipment, etc., • Pay Range from $24-$30 per hour, commensurate with education, skills and experience., • Paid Company Holidays, • Paid PTO Primoris was formed in 2004 as the parent company and is traded on the NYSE under the symbol PRIM. We provide a wide range of construction, maintenance, and engineering services for power generation, oil and gas, chemical, pipeline, utilities and distribution, and civil infrastructure clients. Primoris is ranked in the top 1% of the prestigious Top 600 Specialty Contractors List by Engineering News-Record (ENR), having built projects throughout the U.S. and Canada. For additional information, please visit . ARB, Inc. is the legacy subsidiary of Primoris Services Corporation (NYSE: “PRIM”) that has a long history of providing maintenance, construction, fabrication, and EPC services throughout the U.S., with safety and quality as our highest value proposition. We self-perform and deliver turnkey construction and EPC services to our clients within the energy infrastructure industry (gas processing, product storage and transportation, chemical/petrochemical, power generation, renewables, refining, and mining). ARB Industrial forms a partnership with our customers and major stakeholders from early-stage engineering through construction completion and commercial operation, safely, on-time, and within budget. Agency Statement We are not accepting resumes from Third Party Recruiting Firms for this position. If you are an Agency or Search firm representative, contact the Primoris Talent Acquisition Manager directly for consideration. Primoris or its subsidiaries will not be responsible for any fees arising from the use of resumes and online response forms through this source. In addition, Primoris or its subsidiaries will not be responsible for any fees on unsolicited resumes that are submitted to any member of the Staffing or Operations team. Primoris has established an approved vendor program for this service and will only consider accepting submissions from those approved firms. For consideration in becoming an approved vendor, contact HR. #LI-MD1

Job Description Reports To: General Manager Requirements: Carry or lifting items weighing up to 50 pounds Pulling and pushing up to 150 pounds Frequent standing up and moving Frequently bending, stooping, and kneeling Willing to work on weekends, and/or holidays General Responsibilities: The Maintenance Supervisor oversees hotel maintenance, energy usage and many of the hotel’s safety and security programs. Hotel areas maintained under the direction of the chief engineer include public areas, guest rooms, support areas, machinery, equipment, and grounds. Primary Functions: Supervise the maintenance of the hotel so that there are no additional expenses or loss of business resulting from deferred maintenance. Review and be knowledgeable of information contained on circulate management reports. Implement and adhere to all Company purchasing procedures and controls. Protect the Company’s financial assets. Be knowledgeable on the safe use of tools, chemicals, supplies, and related materials. Use these materials safely and according to instructions. Use hotel supplies and materials efficiently. Promptly report to the General Manager and correct maintenance deficiencies that may have a negative effect on guest comfort and/or operating expenses. Promptly report and correct risks to guest, visitor and employee safety, security, and health to General Manager. Coordinate access to guestrooms and timeliness of guestroom maintenance with the housekeeping and front office departments. Be knowledgeable of hotel features, amenities, and services. Adhere to all company policies and procedures. Participate in job-oriented continuing education programs. Implement and monitor a formal, documented ongoing preventative maintenance program for all hotel’s major equipment and machinery. Implement and monitor a formal, documented ongoing maintenance program for all hotel guestrooms. Represent the hotel with enthusiasm, professionalism and businesslike appearance and demeanor to all hotel guests, clients, prospective clients, and agents, as well as, to the community. Adhere to all laws and regulations regarding workplace safety and health. Educate employees on such laws and regulations and actively promote their adherence to those laws and regulations. Specific Responsibilities Complete and post daily work checklists and special project checklists. Conduct daily tours of all hotel facilities to discover and correct maintenance deficiencies, conditions that negatively affect guest experience and conditions that risk the security safety or health of the hotel, guests, or other visitors. Including but not limited to, trash disposal in public areas. Report and investigate losses of company assets. Tactfully and professionally handle special guest situations and problems. Report guest comments to the general manager and the front desk staff. Respond to written and verbal work orders originating from the front desk, housekeeping staff and management. Deliver requested items to guestrooms, such as bedding, pillows, cribs, rollaway beds, towels, light bulbs and supplies when requested by the supervisor or front desk staff. Report the status of maintenance assignments to the front desk, housekeeping, and management. Repair and clean mechanical equipment. Perform preventative maintenance on mechanical equipment. Complete special projects, including but not limited to, painting, refinishing, plumbing, flooring, wall treatments, landscaping, demolition, construction, electrical, carpentry, refrigeration, and other projects. Repair and clean furniture, fixtures, and equipment in the hotel’s guest rooms, public areas, storerooms, offices, workshops, support areas, garage, and outdoor areas. Secure guestrooms, storerooms, mechanical rooms, and work areas. Secure hotel equipment and supplies. Maintain comprehensive records on guestroom maintenance and preventive maintenance. Complete other assignments and perform other duties as directed by management. Performance Standards: Annual performance evaluations are subjected to contributions of measurable value to hotel metrics and goals.

Job Description Position Summary The Contract Administrator is a cross-functional leader responsible for contract administration, vendor negotiation, bidding, estimating, and strategic sourcing. This role plays a critical part in ensuring the financial and operational success of construction projects by managing contracts, coordinating with vendors and internal departments, and maintaining strict adherence to timelines, budgets, and compliance requirements. Strong spreadsheet, data analysis, and communication skills are essential to excel in this position. Main Tasks and Responsibilities • Prepare, review, and manage all contracts, subcontracts, change orders, and commitment changes., • Negotiate terms and pricing with subcontractors and vendors; facilitate bid processes and scope reviews., • Prepare detailed line-item budgets ensuring consistency with project scope., • Maintain accurate contract logs and procurement documentation, ensuring consistency with internal policies., • Facilitate estimating activities, including material takeoffs, scope analysis, and proposal evaluations., • Ensure accuracy and compliance in all contract documents aligning with company policies., • Maintain strong relationships with subcontractors, vendors, consultants, and city agencies., • Ensure subcontractors meet insurance, licensing, and contract requirements before mobilization., • Facilitate timely and accurate processing of contracts., • Assist with utility coordination and stakeholder communications., • Act as a liaison between the field, design, architecture, accounting, procurement department, and executive team., • Track project budgets, review invoices, and assist in financial forecasting as it relates to contracts and estimates., • Maintain plan sets, filing systems, and contract administration documentation., • 3+ years of experience in contract administration and/or construction procurement., • Bachelor’s degree in Business Administration, Construction Management, Architecture, or a related field preferred., • Advanced proficiency in Microsoft Excel and Google Sheets or equivalent systems is required., • Strong negotiation, organizational, collaborative, and time management skills., • Familiarity with blueprint reading, estimation, and construction materials., • Excellent written and verbal communication skills., • Ability to manage multiple priorities and work under pressure., • Must have a valid driver’s license; ability to travel to project sites and vendors as needed., • Ability to travel to meetings, offsite storage warehouse, events or exhibitions per department request., • Ability to follow directions from a supervisor. AB associates will be eligible for many benefits in accordance with AB’s policies and applicable plan terms, including: • Health Insurance – Medical Insurance & Dental Insurance, • Paid Time Off (PTO) + Paid Holidays, • Simple IRA Retirement Plan with company match, • Paid Maternity Leave, • Potential growth within a growing organization. We promote from within.

Job DescriptionOur client is consistently recognized as a best workplace, and for our commitment to safety, sustainability, and community partnerships. They hire the very best in the construction industry and strives to create an environment that encourages innovation, responsibility, and client satisfaction. Job Summary The Project Engineer is responsible for reading and understanding the construction design documents and specifications, ability to perform construction cost estimates and quantity surveys for various scopes of work, overall trade management and coordination, and some level of exposure to BIM. Benefits Group medical, vision, and dental insurance, including a choice of two benefit plans - a PPO plan and a High Deductible/ Health Savings Account plan with company contribution to HSA.Company-paid short and long-term disability plans, group life insurance, and AD&D plans.Untracked/unmeasured vacation.Sick leave accrued at 1 hour of sick leave for every 30 hours worked with an annual carryover of 80 hours. 9 paid holidays each year.Paid parental leave.Annual discretionary bonus based on company profitability and your manager's assessment of your performance. A 401(k) savings plan under which our client matches the first 3 percent of your deferral with a 100% match and the next two percent with a 50% match for a total matching contribution of 4% of your pay. You are immediately 100% vested in all contributions. They provide both traditional (pre-tax) and Roth (post-tax) contribution options. They are proud to be an employee-owned company. This means you get an ownership stake in the company through a benefit called an Employee Stock Ownership Plan (ESOP). It's 100% company-funded and is invested in company stock. You can participate in this long-term plan after you complete 1 year of service (with at least 1,000 hours). Job Responsibilites Coordinate with project architects, designers, owners, and field personnel.Responsible for generating Request for Information (RFI) and submittals.Manage project subcontractors.Act as the information hub to ensure continuity of work.Offer technical information to project supervisor to ensure work complies with applicable codes, drawings, and specifications.May coordinate change orders, expedite material and job site equipment, assist in preparation of estimates, and compile data to assist in analyzing project progress.Monitor and track project quality control metrics and activities on a regular basis; provide timely and accurate quality reports, and raise issues to Project Manager or Superintendent, as appropriate.Inspect all work to ensure compliance with plans and specifications. Qualifications Graduate or pending graduate of a four-year degree program in Engineering or Construction Management.Full knowledge of computer software, i.e. Microsoft Office Suite.Working knowledge of Autocad or Revit a plus.Broad knowledge of LEAN and BIM techniques.Experience with BIM is a plus.Demonstrated analytical and problem-solving skills.Good oral and written communication skills. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is frequently required to sit, communicate, reach and manipulate objects, tools or controls. The position requires mobility. Duties involve moving materials weighing up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Our client believes in collaboration, team building, and a strong supervisor/employee relationship. To accomplish this, the duties of this role are not performed in a remote capacity, and we expect that all employees will complete work in an office/job site setting. This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines.

Job Description This position of Steam Engineer contributes to the success of Los Angeles Athletic CIub (“Company") by creating positive experiences for every member and guest who visits the club by ensuring that the boilers, chillers, cooling towers and all their associated pumps and controls are working properly; and assisting with the day-to-day maintenance of the buildings and the athletic club amenities when necessary. RESPONSI BILITIES: • Arrives to work on time and in proper uniform ready to work., • Make Preliminary rounds in the Boiler room, ensuring alI machinery is operational, ensuring to note anything that is out of the ordinary., • Report any facility problems such as mechanical, electrical, or plumbing, and life safety immediately supervisor*9., • Turn Boilers off/on, isolate when appropriate, open/close for maintenance and yearly inspections., • Consult with previous Steam Engineer about alI events and readings from prior shift., • Provide safe engineering services to operate, maintain, install, repair, and replace building, ventilating, electrical equipment, including but not limited to steam boilers, chillers, generators, pumps, air compressors, water softeners, HVAC, refrigeration, heating, etc., • Responsible for maintaining cool and hot water supply as necessary, steam requirement for laundry, kitchen, and athletic departments, and thermal building heat., • Check and maintain an accurate log of temperature and pressure readings in Boiler Room, adjust accordingly., • Inspect building and Mechanical Electrical Plumbing (M.E.P.) systems to ensure proper operation and take appropriate action, when necessary, notify Director of Facilities or Assistant Chief Engineer of situations that require immediate attention., • Acknowledge and respond to radio calls in a timely manner., • Perform scheduled preventative maintenance (PM) throughout boiler room, equipment, and systems., • Maintain accurate records of alI maintenance activities, repairs, and replacements. Use personal protective equipment for hearing, eyewear, and shoes. Adhere to alI safety regulations and OSHA standards., • Complete work order in a timely manner., • Assist fel low engineers in department projects and tasks as needed, • Check and adjust HVAC systems for full functionality and for outside temperature., • Maintain HVAC units as directed including replacementt of filter, fan belts, greasing bearings, etc., • Follow Lock Out/Tag out Procedures for any equipment found to be faulty., • Isolate Boilers for maintenance and/or inspections when necessary., • Refer to Steam Engineer checklist for detailed list of duties associated with each shift. EXEMPLIFY OUR MERCU RY RISI NG CLU B VALU ES AT WORK AND DURI NG ALL OFFSITE WORK- RELATED EVENTS: • Teamwork: Work collectively to realize goals that are greater than what you can achieve individually., • Friendliness; create an authentic, welcoming environment for alI patrons; be friendly, greet members with a smile, give a sincere farewell I, and use member's name whenever possible., • Health: promote health by demonstrating a long-term and alI-encompassing approach to health, which integrates soundness of mind, body, and spirit., • Heritage: embrace the values and traditions inherited from the founders of the club., • Strive for Wonderment; create an ambiance of wonder for our members and guests by creating marvel and unexpected joy in every club experience. CONSISTENTLY ADH ERE TO THE LOS ANGELES ATHLETIC CLUB CORE SERVICE STAN DARDS: • Exemplify high-quality hospitality by ma king every member, guest, and business partner feel welcome d, valued, respected, and listened d to; greet at every encounter, offer assistance to anyone who appears in need, escort individuals to correct destination., • Take responsibility for maintaining an uncompromisingly clean CIub; maintain your work area neat and clean, clean after yourself in employee and member areas, be proactive in maintaining member areas neat and clean by performing minor clean up as needed (i.e., cleaning minor food and liquid spilIs, storing forgotten exercise equipment, wiping equipment, etcetera); and promptly report needed repairs, potential safety issues, significant cleaning jobs to housekeeping, cleaning, and/or engineering department., • Follow through h with resolutions to problems from beginning to end; break away from your regular duties if needed to follow through h on resolutions., • Be knowledgeable of CIub information; maintain sufficient and updated information to be able to easily answer questions from members and guest thoroughly from beginning to end., • Practice personal hygiene: wear clean and pressed clothing, CIub name tag, and proper uniform if required by your position., • Use proper and welcoming telephone etiquette; do not screen calls, answer calIs by the 3’d ring, smile while you speak., • Reply to emails the same day you receive them., • Anticipate and comply with member needs and record their preferences., • Be an ambassador of the Los Angeles Athletic Club in and outside the workplace; always represent yourself and the club professionally and with respect.ENSURE A SAFE WORK ENVI RON MENT:, • Comply with the Company Health and Safety (H 6‹S) processes while working on projects, initiatives, and other work-related duties; perform job duties in a way that will not cause danger to self or others, or violate local, state, federal, environmental regulations., • Promptly correct or report any hazard, potential hazard, or unsafe work condition to the Safety Mana ger, Director of Engineering, and/or Human Resources; wear protective equipment when required; ensure work location is kept safe, clean, and organized.INITIATE PROFESSIONAL GROWTH:, • Consistently evaluate work for efficiency, quality, alignment with the Company's service standards, and compliance with Company policies and procedures., • Seek out opportunities to enhance personal skills set relevant to job tasks., • Maintain current product knowledge, best practices, and skills needed to meet the demands of your position. EDUCATION, LICENSES, A CERTIFICATIONS: • Required: Minimum of two (2) years of experience in same or similar positions in the Retail, Hospitality, or Food 6‹ Beverage industry, • Required: City of Los Angel es Steam Engineer of '5OO HP or more License, • Ideal: High School Diploma or GED Equivalent, • Ideal: Current California Driver License with satisfactory Department of Motor Vehicle driving record. ESSENTIAL C/UALI FICATIONS: • Required: At least eighteen (18) years of age., • Required: Reliable and punctual attendance., • Required: Excellent time-management skills; prioritizing and completing assigned job tasks effectively., • Required: Travel (by vehicle and plane) for business, training, and/or development, including overnight trips., • I deal: Bi-lingual oral, speech, and writing skills in English and Spanish or other language is an asset in this position, • I deal: Excel lent interpersonal and customer service skills, • I deal: Computer Experience: proficient Microsoft Office programs, Outlook, and Climate Control App, • Required: Excel lent verbal and written communication skills; ability to convey messages clearly and compose correspondence with correct and proper grammar., • Required: Strong presentation skills; convey messages clearly and confidently; persuade and effect change positively., • Required: Capable of working effectively independently with minimal supervision, • Required: Strong analytical skills., • Required: High attention to detail and accuracy, • Required: Strong organizational skills, • Required: Ability to prioritize effectively and efficiently meet deadlines and produce work in a timely manner., • Required: Ability to elicit and accept constructive feedback. HYSICAL RE UI REM ENTS DEMAN DS AN D WOR IN ONDITION S Heavy work: Exerting up to 'TO pounds of force’ occasionally, and/or up to 3' pounds of force frequently, and/or up to 2O pounds of force constantly to move objects (for example, repair replacement part such as pumps motors, ladders, and construction materials).

Job Description PRIMARY FUNCTION Responsible for the design and technical systems for large, complex projects from schematics through construction administration. Example of large projects might possibly include $600M Cancer Hospital, $300M Bed Tower, $50M Behavioral Health Facility, etc. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. TYPICAL DUTIES • Responsible for building system concepts and documentation process from schematics through construction administration phases within the discipline., • Function as discipline team leader on large, complex projects when assigned., • Responsible for overseeing project team members within the discipline., • Prepare and monitor project status reports., • Prepare and document required code research for project., • Conduct material and product research as required for project development., • Attend project meetings as necessary., • Interface with other discipline team leaders., • Document interpretation and submittal reviews during bidding and construction administration., • Monitor staff to produce quality architectural and engineering services within a project team concept., • Perform other duties as assigned by the supervisor. SKILL, KNOWLEDGE, EDUCATION AND EXPERIENCE • Bachelor's degree and licensure highly recommended., • LEED Accredited preferred., • Minimum six years' experience in A/E industry, prefer 10 years healthcare architecture experience., • 10+ years OSHPD experience, preferred, • Extensive knowledge of all aspects of professional services from schematic design through project close-out, including design and technical expertise., • A comprehensive understanding of the coordination aspects and related requirements of all design disciplines., • Good written and verbal communication skills, and strong organizational skills., • Possess the ability to motivate and mentor staff, and delegate work assignments., • Computer and CADD literate., • Very detail-oriented, self-motivated, enthusiastic and flexible., • Ability to work well with others under deadline situations. PHYSICAL REQUIREMENTS • Capable of traveling to and from project sites for attending client, project and construction meetings., • Ability to access existing and new project sites for observation, investigation and evaluation purposes., • Ability to use equipment for communication and documentation purposes. #LI-RS1

Job Description ACC Environmental Consultants, Inc., ACC, has an opportunity for an experienced environmental, industrial hygiene or health & safety technician with a minimum of 2-years of experience AND at least one of the following certifications: Cal-OSHA Certified Site Surveillance Technician, California Department of Public Health (CDPH) Lead Inspector-Assessor or CDPH Lead Project Monitor. In this position, the successful candidate will conduct building related environmental assessments, assist with project design and monitor contractor activities during remediation activities. The position will focus on asbestos, lead, water intrusion and indoor air quality projects; thus strong understanding of building systems is required. Additional activities will likely include working on concrete/slab moisture sampling, subsurface (soil and groundwater) investigations, Phase I Environmental Assessments (ESAs), hazardous materials management audits, LEED air sampling and waste diversion management, etc. depending on qualifications. Candidates should be energetic, interested in building systems, health & safety concerns. Familiarity with computer operations (Mac & Windows), AcrMicrosoft Office and basic drafting programs is mandatory. Technicians will spend the majority of their time at projects sites throughout the Southern or Northern California area and occasionally throughout California. Technicians will also prepare reports and other project documents related to field operations; assist with occasional equipment maintenance & calibration and general office support. Minimum Requirements: • Cal-OSHA Certified Site Surveillance Technician, California Department of Public Health (CDPH) Lead Inspector-Assessor or CDPH Lead Project Monitor Certifications, • Competent written and verbal communication skills, • Strong organizational abilities and strict attention to detail, • Computer literate, • Willing to travel, work evenings and weekends as projects require, • Be in good physical health and able to wear respiratory and other personal protective equipment, • Ability to climb ladders, navigate crawl spaces, lift/carry equipment (generally up to 50 lbs), stand for long periods of time., • Recent Graduate with BA/BS in environmental sciences, health & safety, industrial hygiene or building related fields., • Basic drafting skills, • Knowledge of building systems & construction techniques, • Ability to read & understand construction drawings (architectural & MEP) ACC provides a comprehensive benefits package to regular full-time and qualifying part-time employees that includes: • Eligibility to participate in the company Employee Stock Ownership Program for qualifying individuals., • Group Medical Insurance, • HSA Contributions to qualifying plans, • 401(k) Retirement Savings Program, • Paid Time Off, • Nine Paid Holidays Per Year, • Bonus Program, • Employee Assistance Program, • Long-term disability insurance, • Life insurance, • Professional development funds for professional license fees, memberships, training and seminars

Job Description Position Overview: The Labor Compliance Analyst monitors, reviews, and enforces the Companies Labor Compliance Program (LCP) in accordance with the companies and DIR accepted practices. Additionally, the analyst performs field interviews and coordinates with contractors/subcontractors on all projects to ensure compliance with California Labor Code, California Code of Regulations, Companies Labor Compliance Program, Federal Davis-Bacon Act (when applicable), and all other applicable regulatory requirements. Position Description: • Work with appropriate employee staff identifying applicability of state/federal prevailing wage requirements as well as providing state and federal prevailing wage rates for inclusion in contract solicitation documents., • Prepare and present labor compliance requirements at pre-bid and/or pre-construction meetings for contracts subject to the payment of prevailing wages., • Respond to prevailing wage questions/concerns/matters that may arise from contractors and construction workers., • Facilitate the proper reporting of prevailing wages, fringe benefits, apprentice utilization, and resolution of employee wage violations., • Collect and review weekly Certified Payroll Records (CPRs) and supporting payroll records (statements of compliance, fringe benefit statements, payroll deductions, apprentice registration, etc.) submitted by prime and subcontractors., • Communicate with contractors to resolve discrepancies/inadequacies related to CPRs submittals., • Conduct investigations on alleged contractor violations uncovered from CPRs reviews, site visits, worker complaints, etc., • Review contractor documents when applicable; determine the withhold amounts for unresolved issues., • Notify affected contractor of audit, conduct pre meeting with contractor., • Prepare the Withholding of Contract Payments; participate in settlement meetings/hearings., • Maintain complete and updated electronic and/or hardcopy contract files, as appropriate, containing all relevant labor compliance information., • Respond to requests regarding payroll related/labor compliance documents., • Track changes and updates to state and federal labor compliance and prevailing wage regulations and standards; with the assistance of the Labor Compliance Lead (LC Lead) LCO apply changes/updates to the labor compliance procedures and practices accordingly., • Assist the LC Lead with the development of labor compliance policies, procedures, form templates, and instructional operations manuals., • Position requires candidates to travel to project sites throughout the district, conduct site visits and job walks, perform labor standards interviews with a random sampling of tradesman onsite, investigate complaints and issues, and report activities monthly., • Conduct observations and worker interviews and assist the Labor Compliance Department (LCD) with site investigations., • Attend meetings at the project site as needed, including pre-bid meetings, pre-construction meetings and progress meetings., • Maintain files of working documents, including project interview and resolution paperwork., • Perform other duties as assigned., • The current District policy is four days in the office with one remote day per week. Work schedule, including remote day selection, is subject to department supervisor approval. The current policy is subject to change at any time. Minimum Required Qualifications: • Minimum two (2) years of experience in public works construction., • Bachelor of Arts/Science Degree or related degree from a recognized college or university. Additional qualifying experience in excess to the minimum stated above may be substituted for the required education on a year-for-year basis., • Must have a clear understanding of construction practices, state and federal labor laws, and the ability to interpret and apply the applicable labor law regulations in accordance with the DIR and the Company Program's standards, • Ability to work in a fast-paced environment, • Must have a high level of interpersonal skills to handle sensitive and confidential situations and documents., • Strong written and verbal communication skills., • Possess valid California driver's license and able to travel., • Experience in Labor Compliance and LCPtracker., • Bi-lingual-Spanish. Job Posted by ApplicantPro

Job DescriptionSalary: $85,000 Description The Director of Facilities is responsible for the overall operation, maintenance, safety, and improvement of all school facilities, grounds, vehicles, and physical infrastructure. This position ensures that the campus is safe, functional, clean, and aesthetically aligned with the school's mission and standards. The Director of Facilities oversees construction projects, custodial, maintenance, repairs, event support, and vendor teams. They manage a team and a yearly budget in conjunction with the business office. The Director of Facilities collaborates with administration on capital improvements and long-term campus planning. They also coordinate and maintain a positive relationship with our landlord, Pilgrim Lutheran Church. Reports to: Associate Head of School for Student Affairs Direct Reports: Facility maintenance team, custodial staff Employment Classification: Full-Time Administrator, Exempt Essential Expectations • Ownership and enthusiasm for the schools mission and values., • Advance the strategic plans operations-level items at the direction of the School Head., • Perform duties and responsibilities as described in the job description., • Uphold the schools professional standards of personal presentation, punctuality, professional courtesy, and discretion., • Represent the school effectively to its constituents., • Develop and evaluate direct reports; report issues to the supervisor promptly., • Maintain a professional demeanor on and off campus., • Maintain professional credentials, as appropriate., • Honor the confidentiality of school, student, family, and employee information., • Comply with all policies and procedures., • Work effectively with colleagues and the direct supervisor, • Be involved in the greater life of the school community, • Develop and maintain positive/professional relationships with students, administrators, parents, and colleagues., • Authentically engage in self-reflection and annual personal and professional growth, including written goals and progress toward those goals., • Substantial and mature in Christian faith, thought, and character., • Uphold the schools standards and expectations for community behavior and morality., • Compassionate, relational, genuine, and humble., • The ability to work with the leadership team, providing support, guidance, and the art of compromise., • A self-starter who is able to establish and maintain various initiatives., • Servant leader with a commitment to excellence., • Able to manage people effectively, with encouragement and appropriate boundaries., • Positive leadership tone; understanding of the big picture., • Able to problem solve; views difficulties as a potential for learning and growth. Key Responsibilities Facility Operations & Maintenance • Oversee daily operations and maintenance of all school buildings, classrooms, athletic fields, offices, and grounds., • Supervise custodial and maintenance staff to ensure clean, safe, and well-maintained facilities., • Develop and implement preventative maintenance programs for HVAC, plumbing, electrical, and other systems., • Ensure compliance with local, state, and federal codes (e.g., fire, safety, ADA)., • Manage campus security systems, access controls, and emergency response infrastructure. Project & Vendor Management • Manage all facility-related vendor contracts (e.g., landscaping, pest control, security, HVAC, waste management)., • Lead small- to medium-scale renovation and construction projects in coordination with architects, contractors, and city officials., • Monitor project timelines, quality, and budgets for capital and maintenance projects. Budget & Planning • Prepare and manage the annual facilities budget, including forecasting expenses and monitoring expenditures., • Assess facility needs and develop long-range maintenance and capital improvement plans., • Provide facilities data and recommendations to support strategic planning and Board presentations. Vehicle Management • Manage fueling cards, including users and pins, • Manage bi-annual vehicle maintenance, typically in February/March and July/August, • Manage monthly vehicle checks, including tire pressure and fluid levels Team Leadership & Communication • Recruit, train, and supervise facilities and custodial personnel., • Set clear performance expectations and provide ongoing feedback and professional development., • Serve as the primary liaison between facilities and school leadership, faculty, staff, and external agencies., • Coordinate with the Director of Technology and the Director of Security on overlapping and facilities-related projects Qualifications Required • Mature in Christian faith. Member of a church community., • Minimum 2 years of experience in facility management, operations, or a related field., • Strong leadership and team management skills., • Knowledge of building systems, maintenance procedures, and regulatory compliance., • Experience managing contractors, vendors, and construction projects., • Ability to create and manage budgets and timelines., • Excellent communication, organizational, and problem-solving skills., • Proficient in Microsoft Office and facility management software., • Valid drivers license and ability to respond to emergencies after hours. Preferred • Bachelors degree in Facilities Management, Engineering, Construction Management, or related field., • Experience in a school or educational environment., • Familiarity with sustainability practices and energy efficiency systems. Working Conditions • This is a full-time, year-round, on-site position., • Must be available for occasional evening and weekend emergencies or events., • Requires walking, climbing, lifting (up to 50 lbs), and working in varied weather conditions.

Job Description At Griffith Company, we recognize that people are our most valuable resource. We nurture that resource by fostering a work environment that encourages communication, respect and recognition. In this environment, Griffith Company employees flourish, taking their careers to new levels. In addition to offering a 120+ year history of quality, safety and excellence, Griffith Company has a dynamic, exciting and supportive culture where opportunity for growth abounds. We are currently seeking a Site Safety Manager for a $58M+ rail project in Hesperia, California. The Site Safety Manager will monitor the onsite activities to ensure that all work is conducted safely and efficiently. The Site Safety Manager will work with the Project Manager and Superintendent on the project to help lead the project team to establishing and maintaining a strong safety culture driven around company values, best practice safety management systems, strong communication, personal accountability, people development and authentic engagement. Essential Functions • Coordinate / Assist with jobsite orientation and safety training., • Lead site supervisors in the enforcement of safety standard according to IIPP., • Assist / Coordinate subcontractor compliance with jobsite safety regulations and requirements., • Lead incident investigations and provide reports. Ensure follow up by project team to make sure corrective action has been taken., • Assist with / coordinate weekly Tool box meetings with site supervisors., • Ensure Project Safety Plan is in place, roles defined, and action plans established., • Coordinate Emergency Response and ensure employees receive medical treatment., • Maintain jobsite postings in accordance with OSHA/Cal-OSHA regulations., • Lead / conduct site safety audits in accordance with Project Safety Plan., • Ensure operations comply with CA MUTCD and temporary traffic control plans., • Assist Project Manager with submittals, • Provide daily report and document daily safety inspections of the jobsite., • Assist with ensuring company compliance with Dig Alert (811) ground disturbance tickets/permits in accordance with CA GC4216., • Maintain and update logs on projects., • Provide safety and security material to personnel., • Assist in the procurement, distribution and training with PPE., • Attend monthly safety meetings held by the Owner/Agency., • Perform testing on noise, air flow and air quality, and also keep record of the testing. The individual must possess the following knowledge, skills and abilities and be able to explain and demonstrate that he or she can perform the essential functions of the job, with or without reasonable accommodation, using some other combination of skills and abilities. • Minimum of 10 years of heavy construction experience, • Minimum of 5 years of Safety experience in a construction industry as a safety professional or supervisor with safety responsibility. Airport construction strongly desired., • Certified in OSHA 30-hour Construction (Valid, unexpired OSHA 30 card within the last 3 years), • Certified OSHA 10 Hour and 30 Hour Outreach Instructor strongly desired., • BCSP Certification (CSP, ASP, CHST, OHST, SMP) Strongly desired., • First aid CPR training required; trainer preferred., • Ability to demonstrate working knowledge of excavations, confined spaces, fall protection, hazard communication, crane & rigging operations, concrete and asphalt paving, and the ability to conduct awareness level training for each discipline., • Have working knowledge of Causal Analysis methods., • Have solid interpersonal skills, must be able to work well with the construction project site team, owners and construction management firms., • Moderate Proficiency in Microsoft Excel, Power Point, and Word., • Efficient recordkeeping and submittals of required project safety documentation.Physical Demands, • Sitting during study periods, meetings, seminars and training sessions., • Seeing and observing at close proximity detailed technical specifications and at a distance in observing and making visual assessments at job sites., • Ability to lift/carry up to 50lbs., • Walking job sites and other locations including excavations, scaffolds, roofs and elevated platforms to observe the work., • Listening to conversations and responses at job sites, job offices and other locations where noise levels are present. Using phones, radios and hand signals, • Lifting and carrying of training and clerical materials and safety equipment., • Ability to safely operate a vehicle to travel to job site visits and attend meetings on behalf of the company. Good driving record required. In addition to offering a comprehensive benefits package for all employees — including a superior health benefits package — Griffith Company also offers generous performance-based compensation. As part of an Employee Stock Ownership Plan (ESOP) Corporation, Griffith Company employees have the opportunity to directly and financially benefit from the Company's success. Other benefits include vacation time, sick days, paid holidays, and a 401K program with match. (Benefits are subject to eligibility requirements) Annual Salary Range: $98,000 - $130,000. Relocation assistance will be provided to candidates outside of the local area on a case-by-case basis. Visit us at: Griffith Company is an equal opportunity employer and an employee-owned company. Important Notice to Staffing Agencies/Recruiting Firms Griffith Company will not accept unsolicited resumes from any sources other than directly from a candidate, Griffith Company employee or any of our external recruiting partners whom we already have an executed written agreement with. Any unsolicited resumes sent to any of the following will be considered Griffith Company property: Griffith Company mailing address, fax machine or email address; Griffith Company employees; or to Griffith Company's applicant/candidate database. Griffith Company will NOT pay a fee for any candidate placement resulting from the receipt of an unsolicited resume. Griffith Company will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. Agencies must obtain advance written approval from Griffith Company’s Human Resources team to submit resumes, and then only in conjunction with a valid fully-executed contract for service and in response to a specific job opening. Griffith Company will not pay a fee to any Agency that does not have such agreement in place. Agency agreements will only be valid if in writing and signed by Griffith Company’s CEO, Executive Vice President or Human Resources Director. No other Griffith Company employee is authorized to bind Griffith Company to any agreement regarding the placement of candidates by Agencies. Powered by JazzHR ERpZaTzDOP

Job Description Come Join Building Electronic Controls Design Team! Are you a passionate AutoCAD Designer looking for an opportunity to express your creativity? Building Electronic Controls, Inc. welcomes individuals who are eager to contribute their design skills and be part of a dynamic team. Our design team collaborates to create the fire alarm designs for the next generation of buildings to grace the skyline of greater Los Angeles. Overview The AutoCAD Designer oversees the design of various commercial fire alarm construction project designs. They work very closely with Field Operations and Customer. The AutoCAD Designer's direct supervisor will be the CAD Manager. Essential Functions As a Full-Time CAD Designer, you will play a key role in crafting accurate CAD format packages for our fire alarm plans. Here's a glimpse of your responsibilities: * Design Coordination: Managing multiple projects from inception to completion, ensuring they align with project hours and different construction phases. * Technical Oversight: Reviewing project scope, product specifications, and fire life safety code compliance for consistency with project specifications, AHJ requirements, and engineer/architect input. * Detailed Layouts: Preparing comprehensive system layouts, including floor plans, Bill of Materials (BOM), sequences of operations, riser diagrams, panel layouts, and calculations. * Revision Expertise: Updating plans based on field changes to create precise as-built drawings. * Effective Communication: Maintaining clear and consistent communication with external customers and internal teams regarding design updates, timelines, and approvals. * Document Presentation: Utilizing in-house printing resources to present your designs professionally. * Special Projects: Taking on additional assignments as delegated by our Operations team. Qualifications Our ideal AutoCAD Designer will possess: • Code Knowledge: Familiarity with NFPA 72 for Fire Life Safety Code., • Software Skills: Proficiency in AutoCAD (5 years' experience on version 2020) and Bluebeam is preferred., • Advanced Skills: Background in BIM/Revit is a plus., • Industry Experience: 3 years of fire alarm design experience (electrical design experience will be considered)., • Construction Understanding: A background in construction is advantageous., • Blueprint Reading: Capability to interpret architectural, mechanical, and electrical plans, layouts, and diagrams., • Time Management: Strong organizational skills to meet project timelines., • Positive Attitude: A professional demeanor and a positive outlook., • Expert Communicator: Able to handle all forms of communication (email, phone call, and verbal) with ease. Benefits: BEC offers the following Section 125 Cafeteria plans: • Group Health Insurance, • 401K Safe-Harbor Matching, • Paid Accrued Vacation Building Electronic Controls, Inc. was established in 1995 and is headquartered in Glendora, CA. BEC is a regional low-voltage electrical contractor focusing on supporting our customers in new construction and in post-construction with maintenance, service, monitoring and testing of the low-voltage systems that we install. The company has 3 satellite offices to provide service throughout California and is family-owned and operated. For additional information about the company please visit our website: . Join Our Team If you're ready to bring your AutoCAD expertise to our creative team and contribute to exciting projects, we invite you to apply today! Company DescriptionBuilding Electronic Controls, Inc. is a leading Union Low-Voltage and Life Safety Systems Integrator. We specialize in providing solutions for Fire Alarm, Smoke Control, Fire Fighter Surveillance, ERRCS, and Area of Rescue in the Southern California and Central California areas. We specialize in providing commercial solutions for various industries, including Airports, Amusement, Corrections, Education, Entertainment, Healthcare, Hospitality, Motion Picture Industry, Retail, and Transportation.Building Electronic Controls, Inc. is a leading Union Low-Voltage and Life Safety Systems Integrator. We specialize in providing solutions for Fire Alarm, Smoke Control, Fire Fighter Surveillance, ERRCS, and Area of Rescue in the Southern California and Central California areas. We specialize in providing commercial solutions for various industries, including Airports, Amusement, Corrections, Education, Entertainment, Healthcare, Hospitality, Motion Picture Industry, Retail, and Transportation.

Job DescriptionSalary: $75,000-$90,000 Company Description At Paulus, we combine our long history of underground wet utility craftsmanship with effective techniques to provide reliable water, sewage, and stormwater solutions. We integrate precise workmanship with quality engineering to build long-lasting, sustainable systems. Our diverse portfolio spans public works, commercial, and industrial projects, with contracts ranging from thousands to multi-million dollars. We offer comprehensive pipeline services that include sewer, water systems, drainage, pump stations, and specialty wet utility projects, handling projects of all scales from single-day and emergency work to large-scale endeavors. Role Description This is a full-time on-site role located in our Anaheim, CA office. The Safety Supervisor will lead the development, implementation, and continuous improvement of our safety programs across our organization. This role is critical in fostering a culture of safety, ensuring compliance with regulatory standards, and driving initiatives that reduce risk and enhance operational safety performance. To be successful in this role, the ideal candidate would have excellent communication skills and attention to detail, with a deep understanding of the construction industry and the ability to successfully manage multiple projects. Duties & Responsibilities Design and implement new safety processes tailored to our construction operations. Audit, update and promote awareness of the companys Injury and Illness Prevention Program (IIPP)/(HIIPP), emergency action plans, and hazard communication protocols. Submits recommendations for improvements and additions to the safety management program including emergency preparedness, accident prevention, general safety, and risk management. Lead investigations and root cause analyses of incidents and partners with the Operations Manager to implement corrective actions to prevent recurrence. Deliver safety training to construction workers on general and job-specific hazards. Ensure all personnel are informed about new procedures, equipment, or hazards introduced to the workplace. Conduct regular site inspections and audits to ensure adherence to OSHA/CALOSHA and company safety standards. Maintain accurate records of safety incidents, training sessions, and corrective actions. Collaborate with HR and management to ensure policies align with legal and organizational requirements. Serve as a safety role model and mentor for field teams. Encourage reporting of unsafe conditions and foster a no-retaliation environment. Participate in safety committee meetings and contribute to strategic safety planning. Other duties as assigned. Skills & Qualifications Minimum of 5 years of safety experience, preferably in the construction industry. Excellent communication, training facilitation, project management, and organizational skills. Self-starter with the ability to manage multiple projects and deadlines independently. Excellent interpersonal skills and the ability to collaborate across departments. Extensive knowledge of company safety policies and applicable Occupational Safety and Health Administration (OSHA/CALOSHA) standards. Proven experience in developing and improving safety programs. Certification in safety (e.g., CHST, CSP) is a plus. Physical Requirements Prolonged periods of sitting at a desk and working on a computer. Physically able to conduct inspections and carry equipment used for inspections. Ability to travel throughout job sites as required to conduct safety inspections. Walk on uneven terrain including paved areas, gravel/rocks, and dirt/sand is required to access various locations on the construction sites. Must be able to lift up to 25 pounds at a time. Benefits Overview We offer competitive company benefits to eligible positions, such as : • 100% Employer Paid Medical and Dental Insurance (Bronze level), • 401(k), • Discretionary Company Bonus, • Paid Vacation and Holidays, • Tuition Reimbursement, • And more! The salary range for this position is between $75,000 to $90,000 per year. • This range is indicative of projected hiring range, however base annual salary will be determined based on a candidates work location, skills and experience. In accordance with the California Fair Employment and Housing Act (FEHA), Paulus Engineering, Inc. is committed to providing reasonable accommodations to qualified individuals with disabilities. If you require an accommodation to participate in the application process or to perform the essential functions of this position, you may request one at any time by contacting Human Resources. The company will engage in a timely, good faith interactive process to determine appropriate accommodations, if any, that do not impose an undue hardship. We are committed to equal employment opportunity and prohibit discrimination and harassment based on race, national origin, sex, religion, color, disability, marital status, protected veteran status, sexual orientation, gender identity, gender expression, genetic information, citizenship, or any other characteristic protected by law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.

Job DescriptionOur client is consistently recognized as a best workplace, and for our commitment to safety, sustainability, and community partnerships. They hire the very best in the construction industry and strives to create an environment that encourages innovation, responsibility, and client satisfaction. Job Summary The Project Engineer is responsible for reading and understanding the construction design documents and specifications, ability to perform construction cost estimates and quantity surveys for various scopes of work, overall trade management and coordination, and some level of exposure to BIM. Benefits Group medical, vision, and dental insurance, including a choice of two benefit plans - a PPO plan and a High Deductible/ Health Savings Account plan with company contribution to HSA.Company-paid short and long-term disability plans, group life insurance, and AD&D plans.Untracked/unmeasured vacation.Sick leave accrued at 1 hour of sick leave for every 30 hours worked with an annual carryover of 80 hours.9 paid holidays each year.Paid parental leave.Annual discretionary bonus based on company profitability and your manager's assessment of your performance.A 401(k) savings plan under which our client matches the first 3 percent of your deferral with a 100% match and the next two percent with a 50% match for a total matching contribution of 4% of your pay. You are immediately 100% vested in all contributions. They provide both traditional (pre-tax) and Roth (post-tax) contribution options. They are proud to be an employee-owned company. This means you get an ownership stake in the company through a benefit called an Employee Stock Ownership Plan (ESOP). It's 100% company-funded and is invested in company stock. You can participate in this long-term plan after you complete 1 year of service (with at least 1,000 hours). Job Responsibilites Coordinate with project architects, designers, owners, and field personnel.Responsible for generating Request for Information (RFI) and submittals.Manage project subcontractors.Act as the information hub to ensure continuity of work.Offer technical information to project supervisor to ensure work complies with applicable codes, drawings, and specifications.May coordinate change orders, expedite material and job site equipment, assist in preparation of estimates, and compile data to assist in analyzing project progress.Monitor and track project quality control metrics and activities on a regular basis; provide timely and accurate quality reports, and raise issues to Project Manager or Superintendent, as appropriate.Inspect all work to ensure compliance with plans and specifications. Qualifications Graduate or pending graduate of a four-year degree program in Engineering or Construction Management.Full knowledge of computer software, i.e. Microsoft Office Suite.Working knowledge of Autocad or Revit a plus.Broad knowledge of LEAN and BIM techniques.Experience with BIM is a plus.Demonstrated analytical and problem-solving skills.Good oral and written communication skills. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is frequently required to sit, communicate, reach and manipulate objects, tools or controls. The position requires mobility. Duties involve moving materials weighing up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Our client believes in collaboration, team building, and a strong supervisor/employee relationship. To accomplish this, the duties of this role are not performed in a remote capacity, and we expect that all employees will complete work in an office/job site setting. This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines.Employment Type: Full time Location: Los Angeles, CA

Job DescriptionBenefits: • Financial Loan Assistance, • 401(k), • 401(k) matching, • Company parties, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Parental leave Are you a skilled Certified Medical Gas Installer looking for a great opportunity to grow your career with a company that values expertise and offers competitive pay and benefits? We want to hear from you! About the Job: As a Certified Medical Gas Installer, you will be responsible for the installation, maintenance, and repair of medical gas systems, ensuring all work complies with safety regulations and standards. You will play a key role in ensuring the highest quality of service to healthcare facilities, such as hospitals, clinics, and other medical settings which our company has specialized in for the past 4 decades! What Youll Do: • Install, repair, and maintain medical gas systems in healthcare facilities., • Conduct routine inspections and testing of gas systems to ensure functionality and safety., • Work closely with engineers, contractors, and healthcare professionals to provide seamless service., • Ensure compliance with local, state, and national regulations and safety standards., • Troubleshoot and resolve any medical gas system issues promptly and efficiently.We Are Looking For You:, • Certified Medical Gas Installer with current certification ASSE 6010 Medical Gas Systems Installer, • Proven a minimum of 5-year excellent experience in the installation and maintenance of medical gas systems., • Strong attention to detail and excellent problem-solving skills., • Ability to work independently and as part of our medical gas team., • Excellent communication skills, both verbal and written., • Ability to work in healthcare environments with a focus on safety and compliance.What We Offer:, • Competitive Wage: Pay range of $38.00 - $45.00 per hour, depending on experience min 5 years, • Medical/Dental/Vision/Life Insurance: Comprehensive healthcare coverage for you and your family., • 401k/Retirement: Secure your future with our retirement plans with company 100% share, • Vacation & Holiday Pay: Paid time off to recharge and enjoy quality time., • Direct Deposit/Online Payroll: Fast, easy, and reliable payment system with ADP, • Online Benefits Enrollment & Management: Convenient benefits, access and management through our online portal.Why Join B & B Plumbing Inc.? At B & B Plumbing Inc., we are committed to fostering a supportive and inclusive work environment where your skills and contributions are recognized and valued. If you're looking to join a dynamic team that offers both professional growth and excellent benefits, we want you! Were looking for a Certified Medical Gas Installer who possesses the following expertise and experience: • Med-Gas Certification: Proven experience with commercial construction plumbing projects, particularly mid to large-scale projects., • Plumbing Trade Knowledge: Strong understanding of plumbing systems, including OSHPD (Office of Statewide Health Planning and Development) standards for healthcare settings., • Deadline-Oriented: Ability to meet construction deadlines while maintaining the highest quality and safety standards., • Excellent Communication: Skills both verbal and written. As a Certified Medical Gas Installer, you will play a key role in delivering high-quality service on our construction and service projects. Your core duties will include: • Safety First: Maintain a safe construction site, adhering to all company safety policies and OSHA standards daily., • Quality Control: Follow company procedures and ensure work meets design documents, OSHPD standards, and regulatory requirements., • Collaborative Construction/Service: Perform and assist in various plumbing tasks and medical gas installations, coordinating with supervisors to meet scheduled project timelines., • PPE Compliance: Ensure proper Personal Protective Equipment (PPE) is always worn, with immediate notification to the office if new gear is required., • Other Duties as Assigned: Be flexible and assist with other related plumbing or medical gas tasks as required by supervisors., • Professional Representation: Represent the company professionally on and off the jobsite, maintaining high standards of conduct and communication., • Training & Safety Meetings: Attend and actively participate in safety tailgate meetings, ongoing training sessions, and any other relevant company workshops or seminars., • Site Organization: Keep work areas neat, clean, and organized, always ensuring a safe and efficient jobsite., • Documentation & Compliance: Ensure all material slips for purchases made on behalf of the company are submitted. Maintain accurate records of time, location, and work descriptions, and submit timesheets as required., • Project Support: Assist with planning, scheduling, and executing plumbing and medical gas installation tasks in compliance with plumbing codes and federal/state/local regulations., • Job Walks & Meetings: Attend job walks and meetings, contributing input as needed and ensuring proper documentation of job specifications., • Change Orders: Ensure timely submission of Change Orders by obtaining necessary documentation and approvals in the field., • Safety Enforcement: Maintain adherence to all safety protocols, including conducting regular safety training for apprentices and enforcing company safety standards., • Complete OSHA 10 training and stay current with all required safety certifications., • Timecard Accuracy: Maintain accurate and detailed timesheets including work descriptions, job site hours, and time away from the job., • Overtime Policy: Overtime is only authorized with written pre-approval from a Foreman or Supervisor. Working "off the clock" is strictly prohibited., • Project Flexibility: This position may require flexible work hours, including nights and weekends based on project schedules., • Driving Policy: Review and comply with company driving policies. Notify HR within one day of any changes to your Motor Vehicle Record (MVR) if driving is part of your role., • Reliability: Demonstrate utmost reliability during scheduled shifts, including night and weekend shutdowns or special projects., • Strong understanding of OSHPD requirements for hospital and healthcare facility projects., • Ability to mentor and assist with less experienced apprentices, offering guidance and training on the job.

Job Description Job Title: Project Engineer Department: Asset Management, Operations Reports To: Project Manager and Senior Project Engineer Location: Water Replenishment District Project - ARC (Pico Rivera) and LVL (Long Beach) Advanced Water Treatment Facilities and others as assigned Years of Experience: Minimum 5 years’ total experience in the Water / Wastewater Industry Classification: Exempt Traveled Required: Between treatment plant locations Job Objective Reporting directly to the Project Manager and Senior Project Engineer, the Project Engineer is responsible for performing process and technical support engineering work and expertise. This position contributes to the goal of optimum plant performance and compliance of two Advanced Water Treatment Facilities (AWTFs). The Project Engineer contributes toward achieving client goals of efficiency, quality assurance and quality control, technical analysis, performance analysis, capital improvements, operation and system reporting and water production through development and implementation of process control management systems for the two facilities. The selected candidate will work closely with PERC staff and client management on successful completion of AWTF facility and O&M contract goals and objectives. The ARC and LVL are Advanced Water Treatment Facilities (AWTF) with MF/UF, RO and UVAOP treatment systems to produce indirect potable reuse water for groundwater recharge (spreading grounds and injection). Principal Duties and Responsibilities • Review and analyze operational and water quality data to determine current operating conditions., • Collaborate with operations and maintenance (O&M) staff by process monitoring, troubleshooting, and the adjustment of control set points to maintain water quality and production goals., • Prepare technical reports, including but not limited to daily, weekly, monthly, quarterly, biannual, and annual reports., • Create and distribute client, regulatory and operating data reports to client and management., • Perform engineering calculations., • Able to interpret technical drawings, P&IDs and specifications and produce repair redline markups., • Review reports, plans, and specifications prepared by client or PERC Water consultants., • Provide plant design, facility modifications and upgrades, process control improvements and coordinates operation, maintenance, and construction activities. • Ensure optimum plant performance and compliance with water quality objectives., • Prepare routine process performance reports documenting treatment performance, plant production and treatment costs., • Utilize process control and QA/QC data management system for monitoring and trending purposes., • Evaluate procedures and practices, and implement revisions as required to improve plant operations., • Evaluate and monitor the operation, maintenance and performance including review of existing system designs and operating parameters, performance testing and troubleshooting of operational equipment and instrumentation problems., • Participate in cross department projects, R&D projects, as directed., • Assist with on-site inspections and follow-up reporting., • Develop and implement SOPs for treatment facilities, as needed., • Edit and coordinates production of manuals, ensuring technical consistency and inclusion of appropriate information and graphics., • Serve as PERC Water operations liaison for capital improvement projects., • Assist with development of training programs, preparation of training materials and training of plant personnel in the operation, maintenance and repair of treatment plan processes, equipment and instrumentation., • Prepare critical path and look ahead schedules as needed., • May be requested to attend and participate in trade shows and conferences ., • Promote and adhere to PERC Water’s written corporate Safety program., • Maintain acceptable attendance per PERC Water standards., • Performs other duties as directed by Supervisor. Knowledge, Skills and Abilities Required 1. Detailed knowledge of the principles, practices and operation of water and/or wastewater treatment processes., 2. Knowledge of microfiltration (MF), ultrafiltration (UF), reverse osmosis (RO), and ultraviolet advanced oxidation process (UVAOP) systems., 3. Ability to normalize operational data and analyze/assess treatment process performance., 4. Thorough understanding of environmental chemistry, microbiology, operations, and hydraulics., 5. Must possess superior organizational skills and the ability to multi-task and prioritize while managing several tasks and/or projects at a time., 6. Ability to adapt to and shift priorities and effectively perform under pressure., 7. Ability to operate and manage manual and computerized information systems., 8. Must possess a high degree of self-motivation and exhibit strong leadership skills., 9. Able to establish and maintain effective working relationships with others., 10. Must possess excellent verbal, written and interpersonal skills to effectively communicate within all levels of the organization and with the client, 11. Proficient with Microsoft applications: Outlook, Excel, Word, PowerPoint, 12. Physical: • Must be able to climb on, or into facility equipment and systems (Confined Space Training required) 13. Mental: • Language: Ability includes reading, writing, spelling, and to communicate clearly on business topics in English. Education, Professional Credentials and Experience Required 1. Bachelor’s degree in engineering or equivalent is required., 2. Detailed knowledge of engineering principles, practices, including the operation of water and/or wastewater treatment plant processes., 3. Preference given to candidates with membrane and AWTF experience., 4. At least 5 years prior water/wastewater/recycled water experience required., 5. A CA Engineer in Training (EIT) or registration as a Professional Engineer (PE) is required., 6. Water and Wastewater certification by the SWRCB, CWEA or AWWA is highly desired., 7. Instrumentation and controls knowledge is highly desired. Work Conditions • Both field/treatment plant and office setting, • Hybrid work with manager approval, • Additional Field/Project work at other plants may be required, • Additional travel as required

Job Description Job Title: 2nd Shift Cleanroom Technician Job Description A leading supplier of surgical one-time-use items, instruments, and kits for hospitals and healthcare product manufacturers is seeking a Cleanroom Technician Assembler to work on their production line. The position is on the 2nd shift from 2:00 PM to 10:30 PM, Monday to Friday, with opportunities for overtime on weekdays or Saturdays. Responsibilities • Count, cut, measure, fold, or otherwise modify raw materials as per directions found in the Device Master Record, and complete necessary inspections and documentation of quantities, control numbers, and other requirements per QS & GMP policy., • Perform on-line inspections of each device as it is produced and report problems to the Production Supervisor for disposition., • Seal products in final packaging configurations, ensuring procedures and machine settings for the sealer are followed properly., • Prepare packaged work in progress for sterilization and complete necessary documentation and control numbers per QS & GMP., • Maintain proper inventory control procedures including product staging, segregation, and rotation., • Perform and document scheduled facility cleaning per QS., • Understand and conform to proper Clean Room etiquette., • Perform other duties as deemed necessary by the Production Supervisor., • Communicate and work well with production, purchasing, quality, and management in accomplishing assigned goals and objectives., • General production skills in a cleanroom setting, • Experience in medical device or medical assembly, • Ability to operate basic production equipment, • Strong attention to detail and motivation to work, • Preferred one year of experience in cleanroom, medical assembly, or warehouse, • Must be able to lift up to 25 lbs, • Proven team leader capabilities, • Basic English proficiency to read work orders and communicate with auditors/supervisors This is a contract-to-hire position with potential for permanent employment after four months. Employees benefit from medical, dental, and vision coverage. The company fosters a collaborative environment where teamwork is encouraged to achieve company goals. Leadership opportunities are available for those who demonstrate initiative and enthusiasm. Work Environment The work environment is a clean room with a total of four employees in a new department. Employees must wear clean room gear, including scrubs, a white coat, gloves, hair net, and follow grooming restrictions such as no makeup, jewelry, eyelashes, or nails. Employees can drink water or take bathroom breaks but must inform the lead due to gowning procedures. Breaks are scheduled after four hours of the shift. Job Type & Location This is a Contract to Hire position based out of Placentia, CA. Pay and Benefits The pay range for this position is $17.50 - $17.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Placentia,CA. Application Deadline This position is anticipated to close on Nov 14, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Assistant Project Manager - Permitting. In this role, you'll independently manage your own projects with the support of a supervisor or more senior PM in delivering seamless permitting solutions across a variety of commercial construction projects. Minimum 1 year of experience in construction admini

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES • Direct Production Team, assign tasks, and allocate resources; facilitate communication among the staff regarding project status, objectives, and performance, and address any project issues, • Interface with clients as directed throughout each project and manage relationships to ensure customer satisfaction, • Prepare, review, and check all construction documents for accuracy; coordinate documents with internal team members and external consultants, • Lead field survey teams as needed for development and documentation of as-built conditions, • Maintain, organize, and archive project files during and at the close of a project, • Demonstrate and utilize working knowledge of lighting, HVAC, structural, plumbing, fire protection, and electrical design as well as of relevant codes, including CBC and ADA, • Coordinate the submission of documents to the building department and support construction administration (RFIs, shop drawings, submittals, etc.), • Maintain an awareness and understanding of project schedules, • Exude a collaborative and positive attitude in working with the Production Team and foster an atmosphere for learning and professional growth, • Assist with other duties as necessary (i.e. site visits, as-builts, code research, etc.), • Maintain MVE + Partners standards of performance and policies at all times, • Extensive knowledge of Architectural detailing and construction standards REQUIRED SKILLS & EXPERIENCE • Degree in Architecture from an accredited institution, • 8-10 years of experience in a professional office setting including broad experience in various project types and phases; Multi-Family experience required, • Advanced skills in operating Revit, CADD, and Microsoft Office, • Ability to make independent decisions and/or recommendation to supervisor or team leaders pertaining to the project assignments, • Ability to make independent decisions and/or recommendation to supervisor or team leaders pertaining to the project assignments, • Strong listening, oral/verbal and written communication, time management and organizational skills required, • Strong skills in reading comprehension to understand the content in work-related documents, • Skills in applying industry standards and graphic conventions data to the organization and arrangement of information (i.e., plans, elevations, sections, etc.) to formulate a unified presentation, • Skill in identifying complex problems and reviewing related information to brainstorm and formulate alternatives

Building Engineering Inspector. A Building Engineering Inspector performs a combination of the following essential job functions:. Option I: One year of experience as a General Contractor, Building Construction project lead/working supervisor or Superintendent, or inspector of building construction

The Construction Manager III will report to the Group Supervisor for Construction Administration in the Engineering and Construction Section. The Construction Manager III will oversee a diverse portfolio of tenant improvement, construction of facilities and laboratory upgrades, ensuring JPL's built

The Construction Site Supervisor will oversee and supervise the construction site, participants and staff. The Construction Site Supervisor task with a variety of duties that are crucial for smooth execution of construction projects. Managing construction staff and providing job site leadership and