Data manager jobs in Brownsville, TexasCreate job alerts

Job Description Summary Instructors are responsible for delivery of all course materials and instruction for academic programs offered by the institution, to prepare the student for the workplace. This position requires knowledge of and adheres to all Southern Careers Institute’s educational policies and procedures. Responsible for maintaining student records and participating in curriculum development and revision. Southern Careers Institute Instructors have the primary responsibility of aiding our students in the achievement of their goal (i.e. to be trained and placed) and delivering a Student First experience. ESSENTIAL DUTIES, RESPONSIBLITIES, AND EXPECTATIONS • Work in a cooperative setting with instructors, students, and support personnel to accomplish the mutual goal of training and placing our students;, • Demonstrates and applies a thorough and accurate knowledge of the teaching field and discipline;, • Plans and organizes instruction in ways which maximize student learning;, • Practice excellence in teaching and instruction;, • Modifies instructional methods and strategies to meet diverse students’ needs;, • Prepare lesson plans and teach course as prescribed by the approved institutional curriculum;, • Encourages the development of communication skills and higher order thinking skills through appropriate assignments;, • Administer tests and maintain a record of student grades;, • Issue lab assignments and homework;, • Conduct classes in a professional and educational environment;, • Enforce school policies and procedures;, • Exhibit reliability to the students through good attendance and punctuality (i.e. to start and end class on time);, • Maintain proper discipline and order in the classroom so that learning is not hindered by unacceptable student behavior;, • Motivate students to learn and enjoy the material being studied;, • Contribute to the Institution and the community by attending, and participating in, all scheduled faculty and in-service meetings;, • Demonstrate evidence of professional growth and academic currency;, • Participate in retention activities such as but not limited to calling, emailing and special events for students;, • Advise students on academic issues and record advisement in writing and/or in the campus’ data base as required by policy;, • Maintain scheduled “office hours” to be available to students for coaching and tutoring;, • Assist with problem solving for student issues;, • Represent the Institute and all affiliated brands in the most professional and positive light at all times;, • Regular, consistent, on-time attendance is an essential function of the job;, • Perform other duties as required or assigned. SUPERVISORY RESPONSIBILITIES None. QUALIFICATIONS The requirements listed below are representative of the knowledge, skills, and/or abilities required to successfully perform the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: • Requirements for teaching General Education and other academic courses: o Bachelor’s Degree and appropriate coursework in the assigned teaching field required; o At least 1 year of experience teaching in post-secondary education in the assigned teaching field is highly preferred. • Requirements for teaching Business related courses: o Bachelor’s Degree in Business or assigned teaching field; o If Bachelor’s Degree is not in assigned teaching field, then at least 2 years of related work experience or evidence of specialized training or competency in the assigned teaching field required; o At least 1 year of experience teaching in post-secondary education in business related subjects is highly preferred. • Requirements for teaching other courses not mentioned above: o Demonstrate competency in the assigned teaching field, such as academic or vocational training and credentials, related work experience, licensure, or certification; o At least 1 year of experience teaching in post-secondary education in the assigned teaching field is highly preferred. Certifications, Licenses, Registrations for Assigned Teaching Fields: • Cosmetology o Cosmetology Instructor License required • HVAC o Diploma/Certificate from an accredited HVAC school o State Contractor’s License o NATE Certification o HVAC Excellence Certification o RSES Certification • Medical Billing and Coding o CMAS o NCICS o NCMOA o CBCS o CMAA • Medical Assistant o RMA o CMA o NCMA o CCMA • Pharmacy Technician o CPhT o PhTR Computer Skills: • Strong knowledge of computer systems including Microsoft Office Suite;, • Intermediate PowerPoint and Excel skills. Writing and Communication Skills: • Clear and succinct communication, both verbally and in writing with a diverse community, student population and with team members and instructors at all levels of the company;, • Listen to and understand a wide-range of issues from both students and Institute team members;, • Strong interpersonal skills;, • Strong verbal communication, written communication, listening, record keeping and information management;, • Maintain a calm and friendly demeanor when instructing and assisting students. Skills, Abilities, or Other Qualifications: • Prioritize, multi-task, perform well under pressure, meet deadlines, and work a flexible schedule;, • Work under minimal supervision and exhibit self-starter traits;, • Take initiative and use independent judgment within established guidelines;, • Successfully interface with office staff and instructors, students and manager;, • Effectively analyze situations and perform conflict resolution;, • Ability to coach and motivate students for goal achievement;, • Ability to research, critically think about and analyze student records and policy for resolution;, • Maintain confidential information and abide by all Family Education Rights and Privacy Act (FERPA) rules and regulations;, • Collect, analyze and interpret data in assigned teaching field to provide up-to-date instruction and information;, • Highly organized and pay attention to detail;, • Passionate belief in the value of our Education Programs. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: • Frequently required to talk and hear in person to small and large groups and over the phone;, • Frequently stand and walk during class instruction;, • Occasionally sit at a desk and use a computer or telephone for extended periods of time;, • Frequent use of hands and fingers to handle or feel for reaching or lifting with hands and arms; o Occasional to Frequent heavy lifting above the waste and head may be required depending on assigned teaching field; o Occasional to Frequent use of industrial machinery such as welding equipment, HVAC equipment, etc. may be required depending on assigned teaching field; • Specific vision abilities required by this job include close vision, distance vision, peripheral vision and the ability to focus;, • Frequent use of the vision for up close inspection of various electronic screens and printed content. Mental demands: • A creative mindset;, • Frequent, extended use of a computer and other electronic devices;, • Ability to learn and comprehend instructions and orientation;, • Understand the meaning of words and body language used by current and prospective students, alumni and employers and respond effectively to achieve Institute educational goals;, • Frequent creative thinking and analysis;, • Frequently instruct and counsel students and present instructions in an understandable and effective manner.

Job Description:\n\nSummary Facilitates the transportation and ownership needs of retail customers. Sells new and used automobiles, accessories and tangible and intangible auto related items approved by the dealership. Generates purchases of pre-owned vehicles for resale in our pre-owned department and assists customers through the ownership cycle. Essential Duties and Responsibilities (Other duties may be assigned as needs arise that are not included herein): Utilizes professional selling skills, both verbal and written, to include in-person presentations, excellent telephone selling techniques, and text and written communications with customers. Records all prospects, leads, lost sales and follow-up activity in the dealer management system (DMS). Actively pursues prospects until they “buy or die”. Keeps management apprised of deal status and asking for their assistance when needed to close the sale. Greets customers quickly and professionally as a representative of the dealership, providing them with your undivided attention. Determines vehicle needs and desires, if a trade-in vehicle is involved, who are the decision maker(s) are, and who the prospective owner(s) will be and what country and state will the vehicle be operated in. Makes an introduction of the sales supervisor prior to the deal write-up so that the prospect can know our key staff members who are working to help them make the purchase, thus increasing the chances of closing the deal. Performs a trade evaluation with the customer present to help establish a realistic value of the trade-in vehicle based upon its present condition, service records, and market conditions. Maintains up-to-date knowledge and familiarity with various models, optional equipment and accessories available. Explains features and benefits of models and equipment. Demonstrates the operation of the vehicle on the road (see Vehicle Demonstration Policy & Route) and recommends optional equipment and accessories based upon customer wants, needs, desires and budget. Specifically with trucks and vans, must know trailering terms (i.e. hitch types and capacities, trailering weight guides, and axle ratios), payload capacity, and cargo dimensions. Explains the vehicle warranty and the difference between the warranty and a service agreement, and how they can work together to the benefit of the owner. Also explains how the vehicle warranties can be affected by the installation of non-approved aftermarket items. Explains new owner benefits like the owner center (website), no-cost maintenance, loyalty rewards and special services we offer, like Pit Stop fluid and tire checks. Explains the manufacturer’s recall process, how to identify affected vehicles and how dealers will work to repair them. Explains the certified pre-owned vehicle inspection process, warranty and certification benefits over non-certification. Window Labels:Explains the “Monroney” window label to new vehicle prospects.Explains the Federal Buyer’s Guide label to prospects, and the following designations:AS IS – NO DEALER WARRANTYDEALER WARRANTYNON-Dealer Warranties For This Vehicle, andService Contract. Must be able to explain general financing, residualized financing and leasing terms and conditions. Follows the approved quotation process for purchases, trade-ins, and vehicle sales. Explains all terms on the Buyer’s Order or lease quotation. Submits down payments, both cash and checks, to the business office so that a dealership receipt is issued, one of which goes to the customer immediately and the other in the deal jacket. DO NOT HOLD DOWN PAYMENTS. Obtains customer signature on the credit application prior to submitting the application to management for pulling the credit history. Advocates the purchase of maintenance and service agreements offered through the dealership, as well as the dealership’s maintenance and repair services. Arranges for delivery of vehicles. Procures a Make Ready for Delivery form from the manager so that we can perform a pre-delivery inspection, recall check and road-test before delivery, as well as have the vehicle cleaned. Installs a New Buyer temporary tag on the newly purchased vehicles prior allowing vehicle to be operated on the roadway. Provides a complete vehicle operational demonstration and assists in personalizing of setups for the customer at time of delivery, including seat and mirror memory, OnStar and CarPlay, etc. Also discusses approximate date regular license plate will be available to the buyer, which can vary due to complexity of the deal (trade payoffs and titles, lender interviews, etc.). Upon delivery, if a customer requests any further work or repairs to a vehicle, kindly inform them that you are not authorized to make these decisions however you will have your supervisor contact them directly. Summon the supervisor immediately. Utilizes the owner’s manual and warranty booklet to familiarize the owner with the vehicle and explain the manufacturer’s vehicle maintenance schedule including any no-charge maintenance services included in the purchase, recommended fuels and lubricants, EPA mileage ratings of the particular vehicle and how actual mileage may vary (see ), and GM’s Bumper-to-Bumper and Powertrain Warranty terms and conditions, plus Roadside Assistance and Courtesy Transportation benefits. Performs The Dealership Orientation Tour, a customer introduction to the various departments including Service and Quick Lube, Parts, and Body Shop, and the many services and products we offer. In collaberation with the new owner, sets and records their first service appointment in the DMS, and explains the dealership's appointment process, including reminders they will receive. Must be able to explain the GM Service and Parts Warranty, GM Accessory Warranty, and the GM Lifetime Service Guarantee (LSG) and component parts included therein, and how they work with the vehicle’s warranty. Must also be able to explain the benefits of GM and ACDelco Parts, as well as servicing with us over of service competitors. Deals with customer complaints in a sensible manner and delivers on all promises to show our commitment to excellent customer satisfaction which results in loyalty and repurchase consideration. When a customer indicates that they are not satisfied, notify your supervisor as quickly as reasonably possible. Keeps apprised of and adheres to all laws relevant to selling automobiles and related products. Complies completely with the law regarding cash reporting (Form 8300) and OFAC specially designated individuals and confidentiality of consumer information. Assists in securing vehicles on display, customer vehicles and the facility itself, and reports any damage, failures, or missing items to the supervisor timely. Helps install merchandising materials and decorations throughout the dealership and display areas as directed. Assists in arranging the display lot including moving vehicles, setting up tents and banners, etc. Assists in keeping all personal and common areas clean and presentable without having to be asked. Picks up trash and disposes of the same appropriately. Recycles anything that can be reused, like dealer’s display materials (plastic license plates, key tags, etc.). Keeps passwords and security codes secure and does not share individual credentials with anyone. Likewise, keep any keys issued secured. Directs all business through the dealership and does not offer or assist customers in doing any part of their automobile business outside of our dealership. Supervisory Responsibilities: This job has no supervisory responsibilities. Competencies: To perform the job successfully, an individual should demonstrate the following competencies : Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service ; Responds to requests for service and assistance; Meets commitments. Interpersonal Skills - Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control. Acts with politeness and friendliness, and never appears distracted or too busy to assist. Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Participates in meetings. Written Communication - Writes clearly and informatively; Presents numerical data effectively; Able to read and interpret written information. Teamwork - Contributes to building a positive team spirit; Puts success of team above own interests. Diversity - Shows respect and sensitivity for cultural differences. Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values. Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time; Supports organization's goals and values; Benefits organization through outside activities; Supports affirmative action and respects diversity. Judgement - Includes appropriate people in decision-making process. Motivation - Sets and achieves challenging goals; Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence. Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Sets goals and objectives. Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments. Quality - Demonstrates accuracy and thoroughness. Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions ; Uses equipment and materials properly. Adaptability - Able to deal with frequent change, delays, or unexpected events. Attendance/Punctuality - Is consistently at work and on time; Arrives at meetings and appointments on time. Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals.; Completes tasks on time or notifies appropriate person with an alternate plan. Initiative - Undertakes self-development activities. Innovation - Meets challenges with resourcefulness; Presents ideas and information in a manner that gets others' attention. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: To perform this job successfully, an individual should have knowledge of Contact Management systems and be able to use a computer (PC workstations and hand-held electronic devices such as tablets and smartphones). Certificates, Licenses, Registrations: Valid Texas state driver's license and maintains a driving record acceptable to insurance carrier at all times. Other Skills and Abilities: Ability to speak English and Spanish. Other Qualifications: Travel less than 5 days per year for training and sales promotion events. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to walk and talk or hear. The employee is occasionally required to stand; sit; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, crawl and occasionally use a 2-step step-stool (do not climb on ladders) or push a vehicle on flat surface for short distances (less than 50 feet) only with the assistance of two or more individuals. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee can be exposed to outside weather conditions as they move between the indoor showroom environment and outdoors. The employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. NOTE: This is not necessarily an all-inclusive list of responsibilities, skills, duties, requirements, efforts, or working conditions associated with the job. While this list is intended to be an accurate reflection of the current job, the dealership reserves the right to revise the functions and duties of the job or to require that additional or different tasks be performed when circumstances change (i.e. emergencies, changes in personnel, work load, rush jobs, or technological developments.) I have carefully read and understand the contents of this job description. I understand the responsibilities, requirements, and duties expected of me. I also understand that this job description does not constitute a contract of employment nor alter my status as an at-will employee. I have the right to terminate my employment at any time and for any reason, and the dealership has a similar right.

Job DescriptionABOUT NEXTDECADE CORPORATION NextDecade is committed to providing the world access to reliable, lower carbon energy. We are focused on delivering secure, low-cost, and sustainable energy solutions through the safe and efficient development and operation of natural gas liquefaction and carbon capture and storage infrastructure. Through our subsidiaries, we are developing and constructing the Rio Grande LNG natural gas liquefaction and export facility near Brownsville, Texas, with approximately 48 MTPA of potential liquefaction capacity currently under construction or in development. We are also developing a potential carbon capture and storage project at the facility that is expected to make meaningful impacts toward a lower carbon future. NextDecade’s common stock is listed on the Nasdaq Stock Market under the symbol “NEXT.” NextDecade is headquartered in Houston, Texas. For more information, please visit . SUMMARY OF THE ROLE NextDecade is seeking a full-time Engineer, Instrumentation & Controls (I&C), to support long-term operations and maintenance for the Rio Grande LNG facility located near Brownsville, Texas. The successful candidate shall be a technical subject matter expert (SME) in Instrumentation & Controls Engineering with an in-depth understanding of Process Control, Distributed Control Systems (DCS), Safety Instrumented Systems (SIS), and Instrumentation. · Reports to the Manager of Instrumentation & Controls and Electrical Engineering, within the Operations Department, under senior leadership including the Director of Facilities Engineering, Sr. Director of Engineering, and VP of Operations.· Senior member of the I&C engineering team, occasionally backfilling the Manager during absences.· No direct reports but may supervise contractor controls engineers and mentor maintenance technicians.· Collaborates with peer engineers across all facility disciplines. This position is located in Brownsville, TX. KEY RESPONSIBILITIES: • Lead I&C Engineering Support for the RGLNG facility, covering day-to-day operations and long-term reliability goals., • Primary Support for Systems/Equipment including DCS, Opticomp, turbine and local control systems (GE Mark Vie/eS), PLCs, Fire & Gas systems, analyzers, valves, actuators, transmitters, flow meters, etc., • Manage Control System Processes such as alarm optimization, overrides/inhibits, software changes, OT/PCD security, and obsolescence., • Frontline Operations Support to investigate control logic/instrument issues, equipment trips, and minimize downtime., • Develop/Track KPIs to ensure reliable, safe, and efficient I&C performance., • Lead & Mentor Technicians in troubleshooting and using centralized diagnostics tools., • Coordinate with Rotating Equipment Engineers and turbine control contractors to ensure compressor reliability., • Participate in Risk Reviews such as PHAs, HAZOPs, SIL/SIF assessments., • Ensure MOC Compliance, including software change management and documentation accuracy., • Establish and Enforce Discipline Standards, specifications, procedures, and guidelines., • Monitor Safety Control Barriers, manage impairment risks to ALARP for continued safe operations., • Collaborate Cross-Functionally with Operations, Maintenance, PSM, HSSE, OT, and other engineering teams., • Manage Software Contracts and service agreements related to control systems., • Contribute to I&C Budget Planning for Facilities Engineering., • Support Brownfield Projects with I&C engineering expertise.MINIMUM REQUIREMENTS:, • B.S. in Controls, Instrumentation, Electrical Engineering or equivalent degree., • 10+ years of I&C systems engineering experience., • 5+ years of I&C systems engineering experience in an operating process facility., • A Professional Engineering License or eligibility for registration., • Willingness to travel, domestically & internationally, as needed (approximately 10-15%) PREFERRED QUALIFICATIONS:

Job Description Summary Instructors are responsible for delivery of all course materials and instruction for academic programs offered by the institution, to prepare the student for the workplace. This position requires knowledge of and adheres to all Southern Careers Institute’s educational policies and procedures. Responsible for maintaining student records and participating in curriculum development and revision. Southern Careers Institute Instructors have the primary responsibility of aiding our students in the achievement of their goal (i.e. to be trained and placed) and delivering a Student First experience. ESSENTIAL DUTIES, RESPONSIBLITIES, AND EXPECTATIONS • Work in a cooperative setting with instructors, students, and support personnel to accomplish the mutual goal of training and placing our students;, • Demonstrates and applies a thorough and accurate knowledge of the teaching field and discipline;, • Plans and organizes instruction in ways which maximize student learning;, • Practice excellence in teaching and instruction;, • Modifies instructional methods and strategies to meet diverse students’ needs;, • Prepare lesson plans and teach course as prescribed by the approved institutional curriculum;, • Encourages the development of communication skills and higher order thinking skills through appropriate assignments;, • Administer tests and maintain a record of student grades;, • Issue lab assignments and homework;, • Conduct classes in a professional and educational environment;, • Enforce school policies and procedures;, • Exhibit reliability to the students through good attendance and punctuality (i.e. to start and end class on time);, • Maintain proper discipline and order in the classroom so that learning is not hindered by unacceptable student behavior;, • Motivate students to learn and enjoy the material being studied;, • Contribute to the Institution and the community by attending, and participating in, all scheduled faculty and in-service meetings;, • Demonstrate evidence of professional growth and academic currency;, • Participate in retention activities such as but not limited to calling, emailing and special events for students;, • Advise students on academic issues and record advisement in writing and/or in the campus’ data base as required by policy;, • Maintain scheduled “office hours” to be available to students for coaching and tutoring;, • Assist with problem solving for student issues;, • Represent the Institute and all affiliated brands in the most professional and positive light at all times;, • Regular, consistent, on-time attendance is an essential function of the job;, • Perform other duties as required or assigned. SUPERVISORY RESPONSIBILITIES None. QUALIFICATIONS The requirements listed below are representative of the knowledge, skills, and/or abilities required to successfully perform the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: • Requirements for teaching General Education and other academic courses: o Bachelor’s Degree and appropriate coursework in the assigned teaching field required; o At least 1 year of experience teaching in post-secondary education in the assigned teaching field is highly preferred. • Requirements for teaching Business related courses: o Bachelor’s Degree in Business or assigned teaching field; o If Bachelor’s Degree is not in assigned teaching field, then at least 2 years of related work experience or evidence of specialized training or competency in the assigned teaching field required; o At least 1 year of experience teaching in post-secondary education in business related subjects is highly preferred. • Requirements for teaching other courses not mentioned above: o Demonstrate competency in the assigned teaching field, such as academic or vocational training and credentials, related work experience, licensure, or certification; o At least 1 year of experience teaching in post-secondary education in the assigned teaching field is highly preferred. Certifications, Licenses, Registrations for Assigned Teaching Fields: • Cosmetology o Cosmetology Instructor License required • HVAC o Diploma/Certificate from an accredited HVAC school o State Contractor’s License o NATE Certification o HVAC Excellence Certification o RSES Certification • Medical Billing and Coding o CMAS o NCICS o NCMOA o CBCS o CMAA • Medical Assistant o RMA o CMA o NCMA o CCMA • Pharmacy Technician o CPhT o PhTR Computer Skills: • Strong knowledge of computer systems including Microsoft Office Suite;, • Intermediate PowerPoint and Excel skills. Writing and Communication Skills: • Clear and succinct communication, both verbally and in writing with a diverse community, student population and with team members and instructors at all levels of the company;, • Listen to and understand a wide-range of issues from both students and Institute team members;, • Strong interpersonal skills;, • Strong verbal communication, written communication, listening, record keeping and information management;, • Maintain a calm and friendly demeanor when instructing and assisting students. Skills, Abilities, or Other Qualifications: • Prioritize, multi-task, perform well under pressure, meet deadlines, and work a flexible schedule;, • Work under minimal supervision and exhibit self-starter traits;, • Take initiative and use independent judgment within established guidelines;, • Successfully interface with office staff and instructors, students and manager;, • Effectively analyze situations and perform conflict resolution;, • Ability to coach and motivate students for goal achievement;, • Ability to research, critically think about and analyze student records and policy for resolution;, • Maintain confidential information and abide by all Family Education Rights and Privacy Act (FERPA) rules and regulations;, • Collect, analyze and interpret data in assigned teaching field to provide up-to-date instruction and information;, • Highly organized and pay attention to detail;, • Passionate belief in the value of our Education Programs. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: • Frequently required to talk and hear in person to small and large groups and over the phone;, • Frequently stand and walk during class instruction;, • Occasionally sit at a desk and use a computer or telephone for extended periods of time;, • Frequent use of hands and fingers to handle or feel for reaching or lifting with hands and arms; o Occasional to Frequent heavy lifting above the waste and head may be required depending on assigned teaching field; o Occasional to Frequent use of industrial machinery such as welding equipment, HVAC equipment, etc. may be required depending on assigned teaching field; • Specific vision abilities required by this job include close vision, distance vision, peripheral vision and the ability to focus;, • Frequent use of the vision for up close inspection of various electronic screens and printed content. Mental demands: • A creative mindset;, • Frequent, extended use of a computer and other electronic devices;, • Ability to learn and comprehend instructions and orientation;, • Understand the meaning of words and body language used by current and prospective students, alumni and employers and respond effectively to achieve Institute educational goals;, • Frequent creative thinking and analysis;, • Frequently instruct and counsel students and present instructions in an understandable and effective manner.

Job DescriptionABOUT NEXTDECADE CORPORATION NextDecade is committed to providing the world access to reliable, lower carbon energy. We are focused on delivering secure, low-cost, and sustainable energy solutions through the safe and efficient development and operation of natural gas liquefaction and carbon capture and storage infrastructure. Through our subsidiaries, we are developing and constructing the Rio Grande LNG natural gas liquefaction and export facility near Brownsville, Texas, with approximately 48 MTPA of potential liquefaction capacity currently under construction or in development. We are also developing a potential carbon capture and storage project at the facility that is expected to make meaningful impacts toward a lower carbon future. NextDecade’s common stock is listed on the Nasdaq Stock Market under the symbol “NEXT.” NextDecade is headquartered in Houston, Texas. For more information, please visit . SUMMARY OF THE ROLE The Production Planner will be responsible for developing, maintaining, and optimizing production forecasts for Operations. This role ensures alignment between production capacity, feed gas and power availability, maintenance, and shipping schedules, whilst maximizing safe, reliable, and efficient production. The Production Planner will work closely with cross-functional teams and report to the Snr. Manager of Production Optimization. Role is based at RGLNG in Brownsville, TX.KEY RESPONSIBILITIES • Develop and manage daily, weekly, monthly, annual, and long-term production schedules and plans., • Collaborate with optimization engineers to incorporate operational insights and performance data into production forecasts., • Support LNG Inventory Management through proactive collaboration with Operations, Maintenance, Marine, and Commercial Operations Teams to minimize operational and inventory risks, review shipping schedules, and safely and efficiently maximize production in alignment with operational goals and constraints., • Incorporate Integrate Activity Plans (IAPs) from maintenance into production forecasts whilst ensuring effective SIMOPS (Simultaneous Operations) planning., • Forecast feed gas and power availability to support production planning and energy efficiency., • Ensure compliance with safety, environmental, and regulatory standards in all planning activities., • Prepare and deliver regular reports on production plans, performance, variances, and key metrics to internal stakeholders and leadership., • Utilize NextDecade’s NextSys Production Management Planning tools for forecasting, scenario modeling, and schedule optimization., • Manage updates, configuration, and continuous improvements of dedicated planning software tools to ensure alignment with operational needs and best practices., • Support the preparation and submission of required regulatory reports in coordination with compliance and environmental teams.MINUMUM REQUIREMENTS:, • Bachelor’s degree in engineering, Industrial Engineering, or a related field., • Minimum 3 years of experience in production planning in LNG or oil & gas, or petrochemical industries., • Advanced skills in Microsoft Office (Outlook, Excel, Word, PowerPoint, OneNote, Teams), Project and Visio., • Experience using CMMs platforms for maintenance planning and coordination., • Strong analytical, organizational, and communication skills., • Ability to work in a high-pressure, safety-critical environment.PREFERRED REQUIREMENTS:, • Experience with LNG terminal inventory management and operational processes., • Working knowledge of feed gas supply dynamics and power demand forecasting.

Job Description Talarico for Texas is hiring a Distributed Organizing Manager to join James Talarico’s US Senate campaign. This is a full-time, paid position perfect for someone who is confident in leading organizing efforts in key parts of the state, and training and supporting staff and volunteers to deliver the voter contact needed to win. Responsibilities • Regional Leadership: Manage the organizing program in the RGV, including hiring, training, and supervising field organizers and fellows., • Volunteer Recruitment & Retention: Build a strong, sustainable volunteer base across your region by recruiting new supporters, identifying leaders, and developing volunteer-led teams., • Direct Voter Contact: Drive execution of canvassing and other regional organizing to meet ambitious voter contact goals., • Training & Development: Train organizers, fellows, and volunteers on best practices for voter contact, relational organizing, and leadership development., • Partnerships & Coalitions: Cultivate relationships with local leaders, organizations, labor unions, and allied campaigns to strengthen the campaign’s presence and expand reach., • Event Management: Plan and execute grassroots events and regional mobilizations, ensuring logistics and turnout goals are met., • Data & Accountability: Track field metrics in VAN and other systems., • 2+ cycles of campaign field experience; prior experience managing organizers or large volunteer teams strongly preferred., • Demonstrated success in meeting ambitious voter contact or organizing goals., • Strong knowledge of VAN/MiniVAN and voter contact tools (Mobilize, etc.)., • Excellent people skills — able to inspire, coach, and hold staff accountable., • Strong organizational and problem-solving skills; able to adapt quickly in a fast-paced environment., • Deep commitment to building diverse, inclusive, and empowering organizing spaces., • Willingness to work long hours, evenings, and weekends, and to travel extensively within your region. Talarico for Texas is an equal opportunity employer. We value the unique backgrounds and perspectives of every individual and strive to foster an inclusive and welcoming workplace for all. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other any other characteristics protected under applicable law. We welcome applicants of all backgrounds. We especially encourage those whose voices and experiences are often underrepresented in political and public service spaces to apply. Benefits Reports to: Organizing Director Location: Rio Grande Valley - extensive travel within the area required Salary: $6,000 per month Benefits: Health care, paid time off, sick leave

Job DescriptionABOUT NEXTDECADE CORPORATION NextDecade is committed to providing the world access to reliable, lower carbon energy. We are focused on delivering secure, low-cost, and sustainable energy solutions through the safe and efficient development and operation of natural gas liquefaction and carbon capture and storage infrastructure. Through our subsidiaries, we are developing and constructing the Rio Grande LNG natural gas liquefaction and export facility near Brownsville, Texas, with approximately 48 MTPA of potential liquefaction capacity currently under construction or in development. We are also developing a potential carbon capture and storage project at the facility that is expected to make meaningful impacts toward a lower carbon future. NextDecade’s common stock is listed on the Nasdaq Stock Market under the symbol “NEXT.” NextDecade is headquartered in Houston, Texas. For more information, please visit . SUMMARY OF THE ROLE The Lead Reliability Engineer is to support the Manager, Reliability in overseeing the Reliability Improvement process of Threats & Opportunities Management for Next Decade RGLNG facilities and attainment of Plant Reliability and Availability targets. The Lead Reliability Engineer provides leadership for Reliability Engineers and Specialists in the Reliability team. The position will be based in Brownsville, TX., permanently. KEY RESPONSIBILITIES • Provide leadership to Reliability Engineers and Specialists in the Reliability team., • Support the Reliability Manager in the development and implementation of Reliability Improvement Process., • Drive Plant/Production impacting “Events” management process., • Support the Reliability Manager to facilitate the Threats & Opportunities Management (TOM) process., • Subject Matter Expert to drive the implementation of Root Cause Analysis (RCA) processes and act as focal point to facilitate RCA workshops., • Subject Matter Expert for facilitation of Reliability Centered Maintenance studies to improve equipment reliability and optimize maintenance cost., • Support the Equipment Maintenance Strategies optimization activities in coordination with relevant departments., • Subject Matter Expert in the running and maintaining the Asset Performance Management (APM) system., • Use Reliability Engineering tools to evaluate Reliability, Availability and Failure trends and recommend areas for improvement., • In coordination with the Engineering team, drive the implementation of Condition Monitoring program., • Support the efforts geared to achieving Key Performance targets for the RGLNG Reliability Team.MINUMUM REQUIREMENTS:, • Bachelor's degree in relevant engineering discipline., • Minimum one implementation of the Reliability Management function within any of the Oil & Gas, Petrochemical, Refining or LNG Industries., • 3+ years LNG experience in a Reliability engineering role., • 8+ years of experience in reliability, maintenance, or asset integrity engineering, in the upstream or midstream oil and gas or downstream petrochemical sectors., • RCM workshop facilitation experience., • RCA facilitation experience.PREFFERED REQUIREMENTS:

Job Description The Kestra team has over 400 years of experience in the external and internal cardiac medical device markets. The company was founded in 2014 by industry leaders inspired by the opportunity to unite modern wearable technologies with proven device therapies. Kestra’s solutions combine high quality and technical performance with a wearable design that provides the greatest regard for patient comfort and dignity. Innovating versatile new ways to deliver care, Kestra is helping patients and their care teams harmoniously monitor, manage, and protect life. A Territory Manager is responsible for securing new business and managing a sales area independently, often remotely from Kestra main offices. This position contacts and consults with a variety of clients in a mixture of clinical settings. In addition to direct sales responsibilities for a given territory, the Territory Manager provides training, on-going product service and support, and assistance in the reimbursement process. ESSENTIAL DUTIES • Responsible for the sales and ongoing support of Kestra products, • Consistently meet or exceed quarterly and annual sales targets as well as performance-based objectives, • Grow and develop trusted partner relationships with key accounts and stakeholders within the territory in a professional and ethical manner, • Prepare quarterly Business Plans and present to Regional Sales Leadership, • Ensure responsible and appropriate use of budgeted expenses by adhering to Kestra policies and procedures, • Attend key exhibits and conventions, as required, • Coordinate patient interaction with Clinical Advisors and Customer Care team, • Provide key feedback and information in a timely manner to appropriate internal stakeholders, • Work closely with leadership across the Sales and Marketing Teams to successfully implement market strategies, • Manage sales cycle from introduction to product delivery, • Build long-term partnerships from sales calls, • Manage pipeline of customers, • Proactively maintain positive client relationships, • Respond to client issues and complaints, • Maintain records and sales data, • Adhere to Pledge of Confidentiality o Information regarding a patient of this company shall not be released to any source outside of this company without the signed permission of the patient. Furthermore, information will only be released internally on a need-to-know basis. All Team Members will not discuss patient cases outside the office or with anyone not employed by this company unless they are directly involved with the patient’s case. COMPETENCIES • Passion: Contagious excitement about the company – sense of urgency. Commitment to continuous improvement., • Integrity: Commitment, accountability, and dedication to the highest ethical standards., • Collaboration/Teamwork: Inclusion of Team Member regardless of geography, position, and product or service., • Action/Results: High energy, decisive planning, timely execution., • Innovation: Generation of new ideas from original thinking., • Customer Focus: Exceed customer expectations, quality of products, services, and experience always present of mind., • Emotional Intelligence: Recognizes, understands, manages one’s own emotions and is able to influence others. A critical skill for pressure situations. Requirements Education/Experience Required: • 5+ years of successful medical device sales experience, • 3+ years of outside sales experience, • Bachelor’s degree from an accredited four-year college or university in Business, Sales, Marketing, or a related field, or an equivalent combination of education and professional experience, • Bilingual (Spanish/English) required. Must reside in the assigned territory • Ability to drive an automobile with a valid driver’s license and acceptable completion of a motor vehicle report (MVR), • Demonstrated strong business acumen, • Excellent written and verbal communication skills, • Familiarity of MS Office, including MS Teams, • Post offer, must be able to achieve credentialing for hospital system entry including, but not limited to: • Documentation of vaccination and immunization status, • Completion of background check, • Completion of drug screening testing, • Review and agree to hospital policies and procedures • Experience in calling Cardiologists, Electrophysiologists, Interventional Cardiologists, or Cath Lab highly preferred, • Demonstrated understanding of Durable Medical Equipment (DME) process flow, • Knowledge of the cardiac care landscape and customer decision-making processes, • Internal candidates who do not have the required experience may still be considered if they have demonstrated consistent performance aligned with sales expectations and have served in a sales support role. SUPERVISORY RESPONSIBILITIES: • None WORK ENVIRONMENT: • Fast paced field role, • Noise volume typical of being in the field or clinical setting, • Extended hours when needed, based on business needs, • Kestra manufactures and provides life-saving products regulated by the Federal Food and Drug Administration and under contract with Medicare. Kestra maintains a drug free workplace and testing is a condition of employment post-offer. PHYSICAL DEMANDS: • Frequent repetitive motions that may include wrists, hands and/or fingers, such as keyboard and mouse usage, • Frequent stationary position, often standing or sitting for prolonged periods of time, • Frequent computer use, • Frequent phone and other business machine use, • Ability to lift up to 40 pounds unassisted, at times from in and out of vehicle TRAVEL: • Frequent domestic travel by car and/or air required, up to 90% OTHER DUTIES: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the Team Member. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Benefits Kestra offers a very competitive benefit package including Medical, Dental, 401K with Match, etc. Pay equity is an important part of Kestra’s Culture. Our compensation ranges are guided by national and local salary surveys and take into consideration experience level and internal equity. Each role is benchmarked based on the job description provided If your qualifications and/or experience level are outside of the posted position, we encourage you to apply as we are growing fast and roles that are coming soon may not be posted. Compensation: An annual salary of $100,000, in addition to a bonus and uncapped commission, commensurate with experience and location. Kestra Medical Technologies is an equal opportunity employer. Kestra Medical Technologies does not discriminate on the basis of race, color, religion, national origin, veteran status, age, sexual orientation, gender identity and/or expression, marital status, disability, physical or mental status or any other characteristic protected by law. We are unable to sponsor or take over sponsorship of employment visas at this time. Applicants must be eligible to work for any employer in the U.S. Kestra manufactures and provides life-saving products regulated by the Federal Food and Drug Administration and under contract with Medicare. Kestra maintains a drug free workplace and testing is a condition of employment.

Job DescriptionJob Description ABOUT THE JOB Do you know why Domino's Pizza hires so many drivers? Well, aside from the fact that our delicious pizza is the perfect solution for dinner for families all across the nation - we do it because we can. What do we mean by that, you ask? We mean that we offer a great flexible schedule that offers the hours you're looking for. That means you're free when you need to be. You'll have plenty of time left over for school, to hang with your friends, or whatever. Even if you need a second job for some extra cash, Domino's Pizza is the perfect place for you. Right now Domino's is looking for qualified drivers to staff stores in your area. We're growing so fast it's hard to keep up, and that means Domino's has lots of ways for you to grow (if that's what you want), perhaps to management, perhaps beyond. Whether it's your hobby, main-gig, or supplemental job, apply online. We're bound to have just the thing for you. JOB REQUIREMENTS AND DUTIES You must be 18 years of age and have a valid driver's license with 2 years of driving history, 1 if over 19. meeting company standards as well as access to an insured vehicle which can be used for delivery. You should possess navigational skills to read a map, locate addresses within designated delivery area and must be able to navigate adverse terrain including multi-story buildings. . ADVANCEMENT Many of our team members began their careers as delivery drivers and today are successful Domino's franchise owners. From delivery driver to management, general manager to franchisee or Manager Corporate Operations, our stores offer a world of opportunity. DIVERSITY Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. SUMMARY STATEMENT We take pride in our team members and our team members take pride in Domino's Pizza! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's Pizza, our people come first! QUALIFICATIONS General job duties for all store team members Operate all equipment. Stock ingredients from delivery area to storage, work area, walk-in cooler. Prepare product. Receive and process telephone orders. Take inventory and complete associated paperwork. Clean equipment and facility approximately daily. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. WORK CONDITIONS Exposure to Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from oven up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING Talking and hearing on telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERAMENTS The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. PHYSICAL REQUIREMENTS including, but not limited to the following: Standing Most tasks are performed from a standing position. Walking For short distances for short durations. Surfaces include ceramic tile bricks with linoleum in some food process areas. Height of work surfaces is between 36 and 48. Sitting Paperwork is normally completed in an office at a desk or table. Lifting Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'. Cases are usually lifted from floor and stacked onto shelves up to 72 high. Carrying Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. Pushing To move trays which are placed on dollies. A stack of trays on a dolly is approximately 24- 30 and requires a force of up to 7.5 pounds to push. Trays may also be pulled. Climbing Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. Additional Information At Domino's, we are a brand of honesty, transparency and accountability and we want exceptional people like you to join our team! We have continued to prove we “Put our People First” by making sure our work environment is safe and provides stability for you as a team member. The brand continues to deliver the “Power of Possible” to local Domino’s store owners, 90% of which started as delivery drivers and pizza makers in our stores!

Job Description BASIC JOB SUMMARY: The Service Technician is responsible for the repair of assigned vehicle jobs. SPECIFIC RESPONSIBILITIES: • Assist the dealership in its efforts to achieve a high level customer satisfaction through proper repair procedures, attitude, and communication., • Properly complete jobs for which the technician is trained and qualified as assigned by service management. Work on jobs on repair order only unless the General Manager authorizes otherwise., • Complete all work according to the applicable safety requirements and published procedures and make every effort to achieve the production objectives set by management., • Maintain an inventory of mechanical tools needed to perform the work for which the technician is trained and qualified for that are not normally inventoried by the service department as “Special Service Tools.”, • Properly use the Special Service Tools, shop equipment, computers, and repair manuals provided by the service department. Return them, cleaned and in order, to their assigned location after use. Do not ever remove these tools from our shop facility. Report missing, damaged or malfunctioning tools to the manager., • Review and adhere to Shop Rules for Technicians. OTHER RESPONSIBILITIES: • Show common courtesy to all customers, supplier/vendors and dealership personnel., • The dealership requires technicians to participate in a uniform program and to wear a uniform daily. Report uniform shortages, errors, and damage to the service manager immediately., • Clock in to work each day upon arrival and when returning from lunch break, and out upon departure for lunch break or at the end of the day., • Wear the appropriate eye, ear, or skin safety protection where necessary. Report any unsafe situations or injuries to management immediately., • Produce high quality work that evidences pride of workmanship:, • Give top priority to any job that has returned due to improper repair or diagnosis (comeback)., • Review technical service bulletins, publications and training communications regularly, and prior to commencing work on an assigned job., • Seek clarification of the customer concern from the Service Consultant and/or customer to effect repairs., • Utilize the assistance of the shop foreman, an experienced and qualified co-worker, and the manufacturer’s technical assistance on jobs that are difficult, unfamiliar, or that a repair correction is not apparent., • Perform a quality control inspection on every vehicle, including a test-drive, and, • Perform a Multipoint Vehicle Inspection on every vehicle and submit service requests to the Service Consultant promptly so that the job can be proposed to our customer and sold., • Record time on and time off for each job to reflect the time repairs ensued and were completed so that the actual amount of time spent on each job can be determined. Claimed additional hours on warranty repairs require “straight-time” recording for payment of time worked beyond the manufacturer’s labor time allowance. Procure the service manager’s signature on the repair order line for any “add-on” warranty work before commencing work., • Notify the Service Consultant and Foreman when a job will take longer than the prescribed labor time allowance or there is a delay, and when the job is complete., • Notify the foremen if you damage the vehicle during the course of repairs, or if you find addition damage or concerns on the vehicle., • Ensure that every customer’s vehicle is returned to them as clean as it was prior to being serviced:, • Use protective gear (fender and seat covers, floor mats, etc.) and other precautions to prevent the vehicle from getting damaged,, • Wipe down surfaces and remove minor stains, and, • DO NOT modify vehicle settings (radio station, seats, etc.) and leave them in their original position., • Participate in the technical training as assigned by management and utilize it to the best of one’s ability. Actively participate in the Manufacturer’s Technician and Industry Certification Programs (ASE) and continually upgrade skills in an effort to earn competencies in the various mechanical categories. Strive to maintain Master Technician status., • Perform all mechanical repair work in an area of the shop that is designated by management. Maintain assigned work space in an organized and clean manner. Hang air hoses, put away shop lights and clean stall and common areas before leaving for the day. Use trash cans and scrap parts receptacles for recycling. DO NOT HOLD CORES, WARRANTY SCRAP PARTS OR JUNK ON BENCH OR IN THE STALL., • Utilize parts requisition procedure for procuring parts from the parts department., • Warranty scrap parts and core return procedure requires your signature on the parts requisition form immediately next to the part number and description to evidence the receipt and custody of the same to our parts department personnel. Failure follow this procedure exactly and return a warranty scrap part or core in “ready to return condition” (i.e. clean, drained, all parts pieces included and undamaged, and with original packaging) will result in a full chargeback of that job to you., • Provide complete and accurate explanations in the three “C’s” format on the repair order to describe the work that was performed. Do not fail to accurately record manufacturer’s required data readings (i.e. bulletin number, unique failure and flush codes, technical assistance case codes, etc.) and the actual ending odometer reading after test drives., • Utilize the appropriate inspection forms when performing pre-delivery inspection services, used vehicle inspections, and vehicle maintenance & safety inspections., • Use shop supplies and materials in a practical and economical manner. Handle all toxic chemicals and hazardous waste or parts according to the manufacturer’s and dealership’s policies. DO NOT DUMP ANY LIQUIDS IN DRAINS – they must be kept in properly labeled containers of like substances and disposed of properly., • Report any situation or condition that jeopardizes the safety, welfare, or integrity of the dealership, its employees, or customers, including unauthorized individuals in the shop like solicitors, customers, employee family members, and other departmental staff members to management., • Park your personal vehicle in designated employee parking areas and not in the facility. If your vehicle needs service, present it on the service driveway to a service consultant who will write-up a repair order. SPECIAL REQUIREMENTS: • Communicate clearly and logically so that technical terms and procedures can be understood by others who do and don’t have technical knowledge., • Read and comprehend bulletins and repair manuals in the English language., • Type using a computer keyboard and mouse to record causes and corrections on the repair order. Must write legibly, too. The work environment includes the following weather conditions: heat, humidity, cold, moisture, and wind. Noise levels are moderately significant (engines and machines operating) to spikes in levels for short periods of time from the operation of power tools. Vehicles can have dangerously hot surfaces and fluids, and systems that can explode, like airbags, and they also have sharp edges that can cut human flesh, for which protective gear must be worn and repair procedures must be clearly followed to avoid accidents and injury. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by the Service Technician to successfully perform the essential functions of this job. Because of the nature of the job only very limited reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Standing: Must be able to work in a standing position up to 8 hours per day in 4 hour intervals on concrete and asphalt surfaces., • Sitting: Certain mechanical tasks may require the technician to work in the sitting position up to 1 hour intervals with mobility breaks as necessary. Sitting surfaces will depend on the tasks being performed., • Walking: Various tasks will require walking as much as 100 yards on concrete or asphalt surfaces. 10 – 20% of the day requires walking in multiple increments., • Changing Positions: Flexibility is allowed in making frequent position changes (standing, sitting, and walking) as necessary to physically perform routine mechanical tasks., • Carrying/Lifting: 80-90% of the day will be spent carrying objects that weigh less than 10 lbs. Less than 5% of the day will be spent lifting objects that weigh over 10 lbs. but not more than 50 lbs. These objects may come in various shapes and sizes. If the object is too bulky or heavy, seek assistance and use appropriate equipment., • Pushing/Pulling: Various types of equipment (i.e. engine hoist, floor jacks, engine analyzer, air hoses, etc.) will require pushing and/or pulling. Pushing is also required when moving inoperative vehicles. Some objects will require up to 50 lbs. of torque or effort for 100 feet or less. Pushing /pulling activities are required 10 – 15% of the work period., • Bending/Twisting: The ability to bend and/or twist from the waist, knees, neck, back, or arms is required 100% of the time while performing repair operations. 80 – 90% of the work period will be spent performing repair operations., • Reaching/Handling: All repair operations will require the use of hands and arms. 90% extension, contraction of arms and 180 degree rotation of hands/arms will be necessary to perform routine job tasks. 80 – 90% of the work period will require various reaching/handling functions., • Climbing: Technicians may be required to service vehicle roof panel accessories or modified equipment installed on customer vehicles. These repairs may involve ascending and descending job-approved steps or ladders. DO NOT IMPROVISE., • Crawling/Kneeling: Crawling and/or kneeling are required when positioning a floor jack or hydraulic lift on concrete surfaces. Some crawling and/or kneeling may also be necessary to inspect under a vehicle at ground level. This function may be necessary 10 – 15 times per work period in 1 – 5 minute increments., • Listening: Yielding all other activities to listen for certain noises or conditions while other noises are happening around you and in the background. SPECIAL SITUATIONS (INJURY STATUS): Technicians sustain injuries on occasion. Report any injury, minor or not, to the Service Manager immediately and recount all circumstances and name any witnesses to the injury as per handbook and dealership policies. Except for minor incidents, like cuts/abrasions/pricks/dust in eye/etc., you are required to submit to a heath screening as soon as reasonably possible. IF you are not able to return to work, notify the Service Manager or General Manager and submit a doctor’s excuse as soon as reasonably possible. Ask the doctor to record your injury status as it relates to work on the excuse. From the doctor’s record, IF you are able to perform partial job duties or light duty work, like training or assisting the dealership with office work (filing, phone calls, etc.), you are expected to do so. IF you are not able to return to work at all, call in to the Service Manager each day with updates at to your status if reasonably possible. Also, let the Service Manager know about doctor’s follow-up visits as soon as you know the date, time and hours that you will need to take away from work. EMPLOYEE ACKNOWLEDGEMENT This is not necessarily an exhaustive list of all responsibilities, skills, duties, requirements, efforts, or working conditions associated with the job. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or to require that other or different tasks be performed when circumstances change (i.e., emergencies, changes in personnel, workloads, rush jobs, or technological developments). I have carefully read and understand the contents of this job description. I understand the responsibilities, requirements and duties expected of me. I also understand that this job description does not constitute a contract of employment nor alter my status as an at-will employee. I have the right to terminate my employment at any time and for any reason, and the dealership has a similar right.

Job DescriptionABOUT NEXTDECADE CORPORATION NextDecade is committed to providing the world access to reliable, lower carbon energy. We are focused on delivering secure, low-cost, and sustainable energy solutions through the safe and efficient development and operation of natural gas liquefaction and carbon capture and storage infrastructure. Through our subsidiaries, we are developing and constructing the Rio Grande LNG natural gas liquefaction and export facility near Brownsville, Texas, with approximately 48 MTPA of potential liquefaction capacity currently under construction or in development. We are also developing a potential carbon capture and storage project at the facility that is expected to make meaningful impacts toward a lower carbon future. NextDecade’s common stock is listed on the Nasdaq Stock Market under the symbol “NEXT.” NextDecade is headquartered in Houston, Texas. For more information, please visit . SUMMARY OF THE ROLE NextDecade is seeking a Sr. Business Improvement Manager to lead the development, implementation, and continuous improvement of the Business Improvement Management System (BEMS) and Budget Planning across the Rio Grande LNG facility located near Brownsville, Texas. The position may require work from Houston during early job phases before transitioning to Brownsville, Texas. The Sr. Manager will provide strategic leadership in driving organizational improvement, fostering a culture of continuous improvement, budget planning, reporting, and ensuring the effective deployment of business improvement frameworks and methodologies.· The incumbent will report to the Senior Vice President, Operations, serving as a key member of the leadership team.· Direct reports include the Business Improvement Coordinator and potential future team members as the function grows.· The role requires extensive collaboration with senior leadership, department heads, and external stakeholders.· Success in this position requires the ability to influence at all levels of the organization and drive sustainable change.KEY RESPONSIBILITIES: • Strategic Leadership:, • Develop and execute the organization's business improvement strategy., • Lead the implementation and continuous improvement of the BEMS., • Provide guidance and direction to department heads on improvement initiatives., • Drive RGLNG annual budget planning., • Drive cultural transformation towards operational improvement., • Represent the organization in industry forums and improvement networks., • Performance Improvement:, • Design and implement performance management frameworks., • Establish organizational KPIs and monitoring systems., • Lead strategic review meetings with senior management., • Drive accountability for performance improvement., • Identify and implement best practices from industry., • Develop and monitor improvement targets., • Team Leadership:, • Manage and develop the Business Improvement team., • Set clear objectives and expectations for team members., • Provide coaching and mentoring to direct reports., • Ensure effective resource allocation for improvement initiatives., • Build team capabilities and business planning., • Foster a collaborative and high-performing team environment., • Management System Governance:, • Oversee the maintenance and improvement of management systems., • Ensure integration of various SAP finance, supply chain and CMMS modules., • Lead Finance and Improvement management review meetings., • Direct internal and external audit programs., • Ensure regulatory compliance and risk management., • Drive RGLNG Finance standardization with NextDecade Corp., • Change Management and Communication:, • Develop change management strategies for major initiatives., • Lead business improvement stakeholder engagement and communication., • Establish effective feedback mechanisms., • Drive organizational learning and knowledge management., • Maintain strong relationships with NextDecade Finance Team., • Budget and Resource Management:, • Develop and manage department budgets and prepare 5yr RGLNG annual budgets., • Evaluate and select improvement tools and technologies., • Prepare O&M monthly, bi-annual, and annual reports., • Track and report on benefits realization., • Justify investments in improvement initiatives.MINIMUM REQUIREMENTS:, • Bachelor’s degree in finance, business administration, or related field., • 10+ years of relevant experience in operational improvement, quality management, or similar roles., • 5+ years of management experience leading teams and programs., • Strong understanding of Finance (SAP) management system standards., • Proven track record of implementing successful improvement programs., • Experience in stakeholder management and executive-level communication., • Demonstrated ability to drive cultural change., • Expert knowledge of continuous improvement methodologies., • Strong business and finance acumen and strategic thinking capabilities., • Experience in the oil and gas, petrochemical, or similar process industry.PREFERRED QUALIFICATIONS:, • Master’s degree in finance, business administration, or related field., • Advanced Leadership Capabilities:, • Strategic business planning and execution, • Change management and cultural transformation., • Team development and coaching, • Stakeholder management, investors, and NextDecade Corp, • Decision-making and problem-solving, • Financial management and budgeting, • Technical Improvement:, • Six Sigma Black Belt certification preferred., • Lean Management certification, • Industry-specific certifications, • Business performance management systems, • Digital transformation experience, • Industry and Business Knowledge:, • Deep understanding of LNG industry dynamics, • Knowledge of global improvement frameworks, • Business planning process management expertise, • Change management methodologies., • Best practice benchmarking, • Industry networking and collaboration

Job DescriptionPosition Description: We're looking for dedicated people with a "CAN-DO" attitude. Buddy's Home Furnishings was founded in 1961 and is a Lease Ownership Company that provides quality brand name products such as consumer electronics, appliances, computers, furniture, and accessories to customers to help enhance their quality of life. Buddy's engages in the lease of household durable goods to consumers on a lease-to-own basis. It operates through 300 stores across the country.Manages customer accounts, satisfying company collection and revenue standards; performs inside sales and outside collections; helps maintain appearance of showroom; takes primary role in delivery and pick up of merchandise; may perform managerial functions or duties as assigned by General Manager; demonstrates effective communication and reasoning skills and shows management potential. Principal Responsibilities Acquire and Maintain Customers Basic furniture, appliance, home electronic installation/removal Complies with all company vehicle safety standards and documentation Credit/Customer Relationship Management Customer payments and data entry in VersiRent computer program Fill out receipt books, make journal entries. Inbound/Outbound Service calls Making deliveries or collecting merchandise Sales and merchandising All other duties deemed necessary by store management Requirements for Account Representative Excellent telephone skills Intermediate math skills Maintain professional appearance Must be able to drive during day, night and meet all safety requirements Must be able to explain terms of rental/lease agreement to customer. Must be able to read, write and communicate effectively in person and over telephone Must be able to work overtime Must be proficient in product features, benefits; must be able to work on showroom floor Must have proficient navigational skills with a satisfactory driving record and meet insurability requirements Regular and consistent attendance, including nights and weekends as business dictates. General Physical Requirements Position routinely requires lifting, loading, moving, and using a dolly for merchandise 50-300 pounds Stooping, bending, pulling, climbing, reaching and grabbing as required Must be able to traverse multiple flights of stairs while carrying furniture, appliance, and electronics Prolonged driving and standing Must be able to work in and outdoors in a variety of climates and weather conditions. $11.00 - $13.00 Hourly

Role: Healthcare Project Manager (PM) Pay Rate: $70/hr/W2 Location: Dallas, TX (Hybrid 2 Days Onsite) Client: HCL Healthcare Duration: Long-Term Contract (C2C / W2) Start Date: ASAP Work Authorization: Open (USC, GC, H1B) Job Description looking for an experienced Healthcare Project Manager to lead

Directs the operation of clinical programs and promotes quality services for the community and patients.Bachelor's degree in Nursing, Health Care Administration or Business Administration required.Master's degree in Nursing, Health Administration, Business Administration, Nursing, or related advance

Buckle - JobID: 069529f3-3285-4be0-938f-7becdb23cc75 [ASM / Store Supervisor] As an Operations Manager at Buckle, you'll: Complete pulls and markdowns; Monitor layaway procedures to ensure layaways are current and accurate; Lead Onboarding and selection activities; Check accuracy of freight packing

Immediate Openings - Brownsville, TX.No Education or Experience Necessary.

Competitive Hourly Pay + Paid Training - As a Data Entry Clerk (Driver Enrollment), you'll: Review applications as well as insurance and vehicle registration documents for accuracy and eligibility; Conduct virtual vehicle safety inspections with qualified driver-applicants (training provided); Comm

Benefits / Weekly Pay - As a Data Entry Operator II you'll: Match customer data between two databases; Assign a Definitive Healthcare unique identifier to each client account ID; Go line by line, confirming facility location & address between the two data sets to create a match; Search the web for h

No Education or Experience Necessary.

Manufacturing Operations Manager (Bilingual; Lean Six Sigma/Continuous Improvement exp. Manufacturing Operations Manager. Metrics-driven with experience leveraging data to optimize workflow required.

Both PT & FT Available - As a Data Entry Specialist you'll: Enter appropriate credits for each song; Transcribe, review, edit, and add the lyrics; Assist in adding all information needed for music publishing utilizing various databases; Create, assign, and place ISRC codes for each song in the reper

Competitive pay / Medical, dental and vision / 401k / PTO - As a Data Entry Assistant you'll: Perform accurate and timely data entry tasks, transferring project-related data into designated databases; Collaborate closely with the project team to ensure the integrity and consistency of collected data

Competitive pay / Health, dental & vision / 401k match / PTO - As a Rebate Data Entry Specialist, you will: Receive data and sourcing documents, compile, sort, interpret and verify data to be entered; Enter rebate information accurately and efficiently into designated databases; Maintain electronic

As a Data Entry Operator you'll: Enter and update property information, transactions, and client details into database; Verify and correct data to ensure accuracy and completeness; Collaborate with other team members to resolve any data discrepancies; Maintain confidentiality and adhere to data secu

Office Assistant / Fully Remote] - Anywhere in US / Excellent compensation with Flexible Schedule / Hardware setup for you to work from home / Paid parental leave, vacation & holidays - As a Data Entry Clerk you'll: Upload Data of Landing Page & Website New Leads on Marketing Sheet; Perform extensiv

Competitive pay - As a Data Entry Specialist at Validus Fitness Training, you will: Enter data accurately and efficiently into various systems and databases; Maintain the integrity and security of all data; Ensure all data is properly formatted and organized; Collaborate with team members to trouble

Immediate Openings - Brownsville, TX.No Education or Experience Necessary.

Full Time or Part Time Positions Available Brownsville, TX.

Competitive pay - As a Data Verification Analyst at Foundation AI, you will: Process, segregate, review, and validate data provided in various formats according to changing process requirements; Prepare, compile, and organize documents for data capture, ensuring accuracy and completeness; Log and ve

Competitive pay / M-F 8a-5p CST - As a Data Entry Specialist you'll: Key in important insurance information from one system to another under specific time frames; Verify the accuracy of new states and products between legacy and new policy system; Conduct investigation and research into system error

Competitive Pay - As a Data Entry Clerk you'll: Transfer data from various sources into the new database; Update databases or records with new information as it becomes available; Correct and modify inaccurate files and records; Comply with security backups and regular checks to ensure data is saved

Up to $20 per hour / Benefits - As a Professional Data Entry Keyer you'll: Read customer and shipping orders submitted in person, via the print catalog and online; Key data into specific Microsoft Excel fields (much of the work for the online orders should already be done for you); Read and key in d

Help us succeed as our next Costco Data Entry Clerk (Remote) to maintain accurate records and documentation, assist with organizing, stocking, and general upkeep, and assist with processing returns and exchanges.

Full Time or Part Time Positions Available Brownsville, TX.

Communicates changes, enhancements, and modifications of business requirements — verbally or through written documentation — to project managers, sponsors, and other stakeholders so that issues and solutions are understood.

Immediate Openings - Brownsville, TX.No Education or Experience Necessary.

Thorough completion of all financial data with an eye to quickly identify potential/existing issues that could lead to subpar financial performance. The successful project managers should have large commercial construction experience, a great attitude with strong client focus, and the ability to wor

No Education or Experience Necessary.

Take the next step in your career as our new United Airlines Data Entry Clerk to support the preparation and delivery of goods or services, follow safety procedures and company policies, and assist with organizing, stocking, and general upkeep.

Immediate Openings - Midland, TX.No Education or Experience Necessary.

As a Remote Data Entry Clerk, you will be responsible for inputting and maintaining data accurately from home, including: input data accurately into company systems from home.

Total Safety is looking for a Project Manager to join their safety conscious team! The Project Manager, in summary, acts in support of the Capital Fire Projects to directly plan, coordinate, and supervise Total Safety, Inc. Proficiency with Microsoft Office, Excel, Outlook, and other database softwa

Step into a new opportunity as a Data Entry Specialist, where you will follow schedules and complete assigned tasks on time, work with supervisors to meet daily goals, and manage simple records and enter information accurately.

No Education or Experience Necessary.

Take the next step in your career as our new Netflix Data Analyst to perform responsibilities as a Data Analyst.

Full Time or Part Time Positions Available Brownsville, TX.

Take the next step as our new Kelly Services Data Entry Clerk to perform daily responsibilities with dedication.

Full Time or Part Time Positions Available Midland, TX.