Trabajos design manager en Rochester, New YorkCrear alertas

Job Description Job Description Summary The Lead Electrician Operates, maintains and repairs distribution and emergency power systems. Installs, maintains and repair electrical wiring and switch distribution panels and outlet boxes. Perform conduit installation, wiring and equipment. Job Description Essential Functions • Provide a high level of expertise in maintaining the facilities critical electrical equipment. (I.e. emergency generator, high and low voltage panel board networking systems)., • Analyze project electrical needs and determine design., • Maintain hand and power tools in working order., • Carry out preventative maintenance program on a wide variety of complex electrical equipment., • Layout and install power circuits in operational sequence, and make all required electrical calculations, such as kilowatt draw and power circuit phase., • Maintain automatic controls, switchboard distribution centers, lighting circuits and flood lights., • Troubleshoot, tear down, disassemble, rewire, adjust, repair and replace electrical apparatus., • Make standard computation relation to load requirements of wiring and electrical equipment., • Respond to all types of electric emergencies., • Detect and report improper operation, faulty equipment, and unusual conditions., • Maintain work area in a clean and safe condition. Comply with CWS and OSHA Policies and Regulations., • Perform other duties as required., • Ensures assigned work tasks meet quality standards., • Promotes the development of quality improvements through the initiation of process improvements. Requirements • High School / Technical School Diploma / Military Trained Electrician, • Electrician License from local jurisdiction, • Must be well versed in the electrical codes and theory, • Minimum of five years working as an electrician, • Computer aptitude working with CMMS and BMS computerized systems, • Ability to read schematics, job instructions, and general correspondence, • Candidates must be able to successfully pass a background check, including criminal history., • C&W Services is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, sexual orientation, gender identity, protected veteran status or any other characteristic protected by law. This list is representative of those duties and responsibilities that are required of this position. However, the list is not to be considered as all inclusive. A supervisor or manager may assign other duties to meet mission requirements of CW Services and cooperation of all personnel is expected to carry out the mission. REQUIRED PHYSICAL ABILITIES Electrical work by its nature requires physical abilities to include lifting up to 50 lbs regularly. Full dexterity is required including bending, kneeling, twisting, fine motor skills with hands and fingers, full rotation of the head and neck. Ability to see, hear and be alert while operating equipment. Ability to operate lift equipment at heights of up to 45 feet and perform work safely utilizing extension and step ladders. Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $31.00- $36.00 hourly \nCompany Description We manage all aspects of facility services for a client. We manage all aspects of facility services for a client.

Job Description Title Assembler Department Assembly Reports to Assembly Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Position Overview The Optical Assembler plays a critical role in the production of high-performance optical components and assemblies used in military systems, advanced imaging and sensing equipment. Many of the products built in this role support mission-critical equipment – including ruggedized optics, low-light imaging devices, and components integrated into defense, surveillance and field-deployed platforms. This position requires exceptional attention to detail, steady hands, and a disciplined approach to following technical work instructions. You will assemble, align, inspect and verify optical components that must perform reliably in demanding environments, from extreme temperatures to high-vibration field conditions. This role is ideal for someone who takes pride in craftsmanship, thrives in a clean, controlled manufacturing environment, and understands the responsibility of building components that professionals depend on in real-world operations. Key Responsibilities: • Assemble precision optical components and mechanical subassemblies using specialized tools and fixtures to meet daily production targets., • Performa fine alignment of optical elements using microscopes, interferometers and laser alignment systems., • Apply adhesives, epoxies and bonding agents with controlled volume and placement, following cure schedules and handling requirements., • Install mechanical fasteners to exact specifications to maintain optical alignment and structural integrity., • Inspect incoming and in-process optical components for defects such as scratches, digs, chips, coating issues and contamination., • Verify optical performance using test equipment such as interferometers, MTF benches, spectrophotometers and optical comparators., • Document inspection results and maintain traceability through travelers, routers, or ERP system., • Identify nonconformance's and collaborate with quality and manufacturing engineering to resolve issues., • Follow detailed work instructions, assembly drawings, and standard operating procedures (SOPs) with zero deviation., • Maintain cleanroom environment standards., • Record production data accurately, including lot numbers, serial numbers, material usage and process steps., • Support continuous improvement initiatives by providing feedback on tooling, processes, and documentation. Required Skills & Qualifications: • High School Diploma/GED Required., • 1–3 years of experience in a manufacturing environment, including hands-on assembly, micro-assembly, or similar precision work. Candidates with other precision, hands-on experience demonstrating strong attention to detail and manual dexterity will also be considered., • Strong manual dexterity and ability to work with small, delicate components under magnification., • Strong attention to detail, consistency, and process discipline., • Ability to read and interpret technical drawings, schematics, and work instructions, • Experience in optical assembly or working with precision optical components a plus., • Familiarity with optical handling, cleaning, and contamination-controlled practices., • Comfortable working in a cleanroom or controlled environment., • Experience with ISO 9001 quality systems a plus., • Familiarity with computers and ERP systems for recording production data. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match & tuition reimbursement opportunities., • Health, dental, vision & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Work Environment & Physical Demands • Work is performed in a cleanroom and manufacturing environment with exposure to moving equipment, moderate to loud noise, and materials such as oils, solvents, and cleaning agents, • Requires use of appropriate personal protective equipment, including safety glasses and cleanroom garments, • Position involves a combination of standing, walking, and sitting for extended periods, along with occasional stooping, kneeling, and reaching, • Frequent use of hands for handling and assembling small components requiring fine motor coordination and dexterity, • Sustained visual focus is required, including close-up and magnified work, with the ability to identify fine detail and adjust focus as needed, • Regular use of computers and standard assembly or inspection tools, • Ability to lift up to 50 lbs. as needed, • Work may shift between stations and may require schedule flexibility, including overtime or weekend work based on production needs Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. A Shift Schedule: Monday - Friday, 6am - 2:30pm B Shift: Mon - Fri 2pm - 10:30pm Training to be conducted on A shift for 2 - 4 weeks before transitioning to B shift schedule

Job Summary\n \n \nThe Quality Manager is responsible for leading a team to develop, implement, and improve quality control processes in alignment with ISO9001:2015. This role involves managing the post-shipment support process and leading a team to identify, recommend, and implement solutions to continually enhance quality performance, focusing on reducing the cost of poor quality and improving customer experience.\n \n Principal Duties and Responsibilities\n \n\n • Lead organizational ISO9001:2015 compliance and maintain the Quality System by developing, implementing, and improving standard processes.\n, • Oversee and meticulously document quality control processes and procedures.\n, • Define the quality direction for both business and manufacturing processes and implement comprehensive strategies to achieve organizational quality objectives.\n, • Identify opportunities to develop new processes and capabilities to reduce costs associated with warranty, scrap, and rework.\n, • Develop and implement standards for business processes to ensure product conformance and reduce non-conformance.\n, • Develop and implement Quality Control Plans across the multidisciplinary aspect of our manufacturing processes.\n, • Lead a team to develop, maintain, and improve quality processes that optimize safety, quality, delivery, and cost.\n, • Champion continuous improvement and develop the team to support root cause analysis and problem-solving based on data analysis and statistics.\n, • Collaborate with project management, sales, and design engineering departments to define inspection and test plans to meet committed specifications.\n, • Prepare product and process reports by collecting, analyzing, and summarizing information and trends to influence and set business strategy.\n, • Establish and lead processes to identify and rectify non-conformance of products or processes, allocating resources accordingly to achieve business objectives.\n, • Provide infrastructure and processes to support and address customer complaints, implementing corrective actions to prevent recurrence.\n, • Contribute to vendor component qualification and corrective actions to ensure purchased parts, in-process samples, and finished products meet established testing and inspection standards.\n, • Manage business change control processes to structure, monitor, and verify proper implementation.\n, • Ensure compliance with established industry safety, design standards, and guidelines.\n, • Perform quality activities in compliance with company and manufacturing standards, engineering principles, customer requirements, and related specifications.\n, • Perform other duties as assigned.\n\n Knowledge, Skills, and Abilities\n \n\n • Data analysis, statistical control and processes creation/development.\n, • Ability to read, interpret, and understand technical engineering drawings and symbols (e.g., blueprints and GD&T).\n, • Monitoring and assessing performance to make improvements or take corrective action.\n, • Strong judgment and decision-making skills, considering the relative costs and benefits of potential actions.\n, • Project management skills and experience with tools.\n, • Experience with manufacturing processes such as welding, milling, turning, and machine assembly.\n, • Proficiency in Microsoft Office Suite and ERP programs (e.g., Microsoft Word, Excel, Outlook, SharePoint, SAP).\n, • Strong root cause analysis and problem-solving skills.\n, • Must have strong interpersonal communications skills\n\n \n EDUCATION AND EXPERIENCE\n \n\n • Bachelor's degree in an Engineering discipline and minimum 5+ years' Quality Management experience in a ISO9001:2015 compliant manufacturing environment.\n, • Six Sigma Certified as a plus\n\n \n PHYSICAL DEMANDS\n \n \nThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.\n \n \nThis role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. While performing the duties of this job, the employee is regularly required to sit and use hands, fingers, handle or feel, talk, see, and hear. The employee is occasionally required to stand, walk, and reach with hands and arms. The employee must occasionally lift and/or move occasionally lift office products and supplies, up to twenty-five pounds. Use of the appropriate PPE is required. \n \n WORKING CONDITIONS\n \n \nThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.\n \n \nThis job operates in a manufacturing professional office environment. The employee can be exposed to fumes or airborne particles, moving mechanical parts, vibration, and loud noise level while on the production floor.\n \n \nThe noise level in the office work environment is usually moderate.\n \n DISCLAIMER\n \n \nThe above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.\n \n \nAnticipated salary range for this position: $97,000/yr. to $134,860/yr. The anticipated salary range is what we believe to be the likely base salary range for this position at the time of posting. Actual salary for this position will depend on relevant qualifications, skills, and experience.\n \n SPX FLOW VALUES\n \n \nSPX Flow employees are expected to behave in accordance with our company values as outlined below.\n \n QUALITY\n \n \nQuality encompasses all aspects of SPX's business, and every employee shares the responsibility to prevent the occurrence of any nonconformity relating to product, process and the quality system. All employees have an obligation to identify and record any such nonconformity, and through designed channels, initiate and recommend solutions.

THIS POSITION IS LOCATED IN ROCHESTER, NY. THE RATE OF PAY IS $120-170K YEARLY. \n \n The Bell Company is a large EMPLOYEE-OWNED Mechanical Contractor that takes on some of the most complex projects in our East Coast Market. This is your chance to become a part of this dynamic team and work towards the mutual success of the project, the company, your co-workers and yourself. \n \n THE OPPORTUNITY: Mechanical Virtual Design Manager (VDM)/BIM Manager \n As a Mechanical Virtual Design Manager (VDM)/BIM Manager with The Bell Company, you will have the opportunity to use your skills to work on hospitals, laboratories, and large industrial projects. Additional information on all our projects can be found on our website: www.thebellcompany.com \n \n PAY RANGE: \n $120-170K/YEAR FOR MECHANICAL VIRTUAL DESIGN MANAGER(VDM)/BIM MANAGER \n \n THE BENEFITS: \n At the Bell Company we believe in rewarding members of our teams with more than just a competitive rate. We also offer: \n\n • Being part of an EMPLOYEE-OWNED COMPANY with the company contributing stock in the anticipated value of 3% to 6% of your gross (ESOP program) as well as an annual bonus program for all employees. Both programs are subject to vesting and/or company performance.\n, • Ongoing professional training and development\n, • Opportunities for advancement\n, • Defined annual bonus program based on Company performance\n, • Employer paid $50,000 life insurance\n, • Elective medical with 75% employer contribution, dental and supplemental benefits are available immediately\n, • 401 (k) program with 3% employer grant\n, • Paid vacation\n, • Paid holidays\n, • Relocation assistance available\n\n \n REPORTS TO: \n\n • Executive, per the Company Organization chart\n\n \n PAYROLL CLASSIFICATION: \n\n • This position is a Salaried Exempt Position (Executive)\n\n \n JOB REQUIREMENTS: \n The ideal candidate for our Virtual Design Manager (VDM)/BIM Manager will have previous experience leading a coordination effort and have hands-on experience in the Mechanical trades. \n KEY SKILLS: \n\n • REVIT, SYSQue and Navisworks\n, • AutoCAD\n, • Field and 3D Coordination\n, • Management\n\n PREREQUISITES: \n\n • 10 years of Experience in the detailed drafting and coordination of complex mechanical projects\n, • Proven ability to schedule on a department level and monitor and maintain the same.\n, • Demonstrated experience with Computer Programs/Systems used in the drafting, coordination, collision verification and fabrication spooling.\n, • Displays leadership capabilities and can supervise BIM Coordinators in the Corporate Office, Regional Offices and remote project locations.\n, • A good understanding of Bell policies and procedures\n, • Ability to read and interpret Contract documents, modeled construction documents and specifications.\n, • Ability to plan and organize activities\n, • Experience is required with equipment typical for Mechanical, HVAC Process Systems, and Advanced Plumbing Systems.\n\n DUTIES: \n\n • Maintain the ethics and professionalism of The Bell Company in the execution of the duties and responsibilities of the position.\n, • Maintain Bell Standards so all projects and systems that we use operate identical to every Bell project.\n, • Monitor Lead Coordinators in Regional offices to assure they are coordinating and supervising all BIM coordinators assigned to the regional office or project sites in the region.\n\n COMMUNICATION \n\n • Provide leadership and vision for the department\n, • Maintain open communications between home office and Bell’s field management staff.\n, • Create a team atmosphere where everyone in the BIM department understands the goals and how their involvement in the project is vital to its success.\n\n BIM SCHEDULE \n\n • Provide projects man hours and durations for schedule development and ensure team wide understanding of the BIM requirements for a project.\n, • Consistently maintain or exceed scheduling expectations\n, • Provide to the project team the plan of the schedule for drawing completion and progress against that plan\n\n RESOURCES \n\n • Supervise all BIM staff for conformance with position descriptions and the Company Policy and Procedures.\n, • Integrate the BIM personnel as part of the dynamic project team.\n, • Assure that all work hours are documented daily and are accurate\n, • Provide BIM personnel support as required by project schedule\n, • Assist in Identifying, recruiting and evaluating BIM candidates for open positions.\n\n TRAINING \n\n • Assure that every individual assigned to a project is adequately trained in all software and procedures.\n, • Provide Training and Supervision of in-house BIM users for all upgrades, program modification and procedure changes.\n, • Secure outside training as required to maintain an industry leading group.\n\n HARDWARE/SOFTWARE \n\n • Maintain optimum BIM Hardware and Software inventory\n, • Negotiate competitive pricing of BIM software purchases and maintenance contracts\n, • Order & maintain plotter supplies\n, • Provide support for plotting and electronic file submissions\n, • Provide technical support for all BIM software\n, • Coordinate with IT to facilitate integration, upgrades and licensing.\n, • Train Coordinators in files set up and support for the Trimble field layout system.\n\n COST CONTROL \n\n • Responsible for developing and then maintaining project BIM cost/budgets\n, • Provide a budget for all BIM technology items\n, • Provide and manage a budget for training with a well-defined scope\n, • Review BIM operator progress on a routine basis to ensure productivity.\n\n QUALITY CONTROL \n\n • Develop and maintain the Revit Family Library\n, • Develop specification and material databases internal to Revit software\n, • Customization of Revit programs to optimize customer requirements and the Bell Company productivity\n, • Develop, implement and enforce Revit/BIM standards\n, • Routinely communicate with the projects about the accuracy of the model and drawings\n\n FILES \n\n • Develop and maintain document control procedures and control of all Revit and Navisworks files\n, • Maintain up-to-date drawing records per Company standards\n, • Organize the Revit/BIM virtual environment\n, • Maintain Revit/BIM document archive and retrieval for projects\n, • Audit and purge Revit files for project closeout\n\n PROJECT CLOSEOUT \n\n • Provide as-built drawings in the format and detail required by the contract documents.\n\n \n ADDITIONAL REQUIREMENTS \n\n • Dedicated, self-motivated with good verbal and people skills.\n, • Demonstrate a stable work history.\n, • Able to prioritize and work independently.\n, • Pass a pre-employment drug screening.\n, • Willing to work all hours and schedules assigned.\n\n \n The Bell Company is an Equal Employment Opportunity Employer. Minorities, Women, Disabled and Veterans are encouraged to apply. \n Our focus marketplace is the Heavy Construction Industry (Mechanical Piping) and PLUMBING \n If you have experience in the following disciplines, we want to hear from you! \n

Job Description Job Title – Truck Driver, Receiving Clerk, Light duty Drives truck with capacity under 3 tons to transport materials in liquid, solid or packaged form and personnel to and from specified destinations, such as plants, residences, offices or within industrial yards. Reports to the Manufacturing Manager Primary Responsibilities: • Verifies load against shipping papers, • Drives truck to destination, applying knowledge of commercial driving regulations and roads in area, • Schedules pick up and deliveries in the most practical order, • Prepares receipts for load picked up, • Receives goods into Navision, • (May) maintain truck log according to state and federal regulations, • (May) maintain telephone or radio contact with supervisor to receive delivery instructions, • (May) load and unload truck, • (May) inspect truck equipment and supplies, such as tires, lights, brakes, gas, oil, and water, • (May) perform emergency roadside repairs, such as changing tires, installing light bulbs, fuses, tire chains, and spark plugs, • (May) operate lift truck to lift shipment out of truck on dock Secondary Responsibilities: • Able to lift or exert force of 30 pounds minimum, • Receive ISO training as required Job Qualifications: Education and Experience: High school graduate. New York State Class D driver license required no restrictions. Specific Competencies: • Employee is required to stand, walk, push, pull, reach overhead, and bend to the floor, • Exert 20 to 50 lbs. of force occasionally, and/or exert 10 to 25 lbs. of force frequently and/or exert up to 10 pounds of force constantly to move objects, • Ability to handle changing priorities and multiple tasks, • Strong interpersonal skills, • Exercises good judgment, • Ability to take direction Work Environment: The employee is subject to high noise levels from operating machines and physical hazards from moving equipment and machine parts. The employee may be required to follow other job-related instructions and to perform other job-related duties as requested, subject to all applicable state and federal laws. Visual Acuity as required to pass driver test. \nCompany Description Micro Instrument Corp was founded in 1944 by a family of German Immigrants who were tool makers by trade. The initial business model focused on developing small surgical instruments. Shortly after our establishment, a considerable opportunity became available to support local industrial giants such as Eastman Kodak, Bausch + Lomb, and GM/AC Delco. As the skills of our founders got recognized, it didn't take long for the complex machining contracts in town to be sent to Micro. We are very proud of our excellent machining legacy and capabilities, which still remains a staple of our company's success. By the late 1960s, manufacturing in the Rochester area was booming, which offered vast opportunities. Several major Micro clients strongly recommended that we get involved in the machine build business; some of which requested private meetings to detail their desperate need for reliable and efficient local machine builders. The leap into equipment design and build was taken in 1967, and has grown to be the heart of our company. From that point on, Micro Automated System's Group became a reality. Today, Micro continues to grow and ship equipment all over the world. Utilizing a state-of-the-art 55,000 square foot facility, we provide custom machinery and tools for multi-national clients including NASA, Covidien, Walt Disney, Xerox, and Valeant Pharmaceuticals. We employ a full staff of engineers, technical writers and trade professionals with unparalleled experience in the industry. Over half of our employees have over 20+ years tenure. With Micro's resources, engineers, facility, and dedication, we have the ability to design, build, and manage every manufacturing project to satisfy all of our client's requirements. Micro Instrument Corp was founded in 1944 by a family of German Immigrants who were tool makers by trade. The initial business model focused on developing small surgical instruments. Shortly after our establishment, a considerable opportunity became available to support local industrial giants such as Eastman Kodak, Bausch + Lomb, and GM/AC Delco. As the skills of our founders got recognized, it didn't take long for the complex machining contracts in town to be sent to Micro. We are very proud of our excellent machining legacy and capabilities, which still remains a staple of our company's success.\n\nBy the late 1960s, manufacturing in the Rochester area was booming, which offered vast opportunities. Several major Micro clients strongly recommended that we get involved in the machine build business; some of which requested private meetings to detail their desperate need for reliable and efficient local machine builders. The leap into equipment design and build was taken in 1967, and has grown to be the heart of our company. From that point on, Micro Automated System's Group became a reality.\n\nToday, Micro continues to grow and ship equipment all over the world. Utilizing a state-of-the-art 55,000 square foot facility, we provide custom machinery and tools for multi-national clients including NASA, Covidien, Walt Disney, Xerox, and Valeant Pharmaceuticals. We employ a full staff of engineers, technical writers and trade professionals with unparalleled experience in the industry. Over half of our employees have over 20+ years tenure.\n\nWith Micro's resources, engineers, facility, and dedication, we have the ability to design, build, and manage every manufacturing project to satisfy all of our client's requirements.

Job Description Job SummaryVanteon is actively looking for Engineering Coops for the upcoming semesters. The position will be responsible for assisting our experienced team of hardware, embedded software, and FPGA engineers develop solutions for our clients. In addition, you will help support IRAD developments, such as Vanteon's vProtean SDR platform.Duties/ResponsibilitiesThe following is a list of the expected duties of this position. Management will adjust them to align with your previous experience and education.Take direction from assigned mentor and project manager on daily tasksWrite HDL code for FPGAsWrite code for microprocessors (C, C++, Python, or other)Work with hardware design tools (e.g., Altium) to create schematics and PCB layoutsWork in the lab to build or rework printed circuit boardsWork in the lab using test equipment (e.g., Oscilloscopes, Spectrum Analyzers, and more) to test circuitsRequired Skills & KnowledgeSome knowledge of coding for embedded processors or FPGAs is required, orKnowledge of hardware design for PCBs (i.e., schematics and PCB layout)Desired Skills:Excellent analytical and communication skillsHighly motivated self-starter, well organizedEducation and Experience:Students actively pursuing a Computer Engineering, Electrical Engineering, Computer Engineering Tech, Electrical Engineering Tech, or similar degree.Other RequirementsTraining and regular duties require a regular in-office presence. Hybrid/flexible scheduling is available based on business needs.Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours.Physical RequirementsProlonged periods sitting at a desk and working on a computerBe able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching.Must be able to lift up to 15 pounds at times.The physical demands described above represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.Compensation RangeAlthough a candidate's specific compensation will depend highly on their specific skills and experience, the anticipated compensation range for this position is $18.00 to $25.00 per hour. This is a temporary position and, as such, does not qualify for Vanteon's standard benefits package.Due to contractual requirements, if hired you will be required to pass both a background and drug screening.

Job Description Dental CAD/CAM Manager Location: Rochester, NY Job Type: Full-time, Onsite Compensation: $80,000–$100,000 per year, based on experience Additional Compensation: Incentive opportunities available Benefits: Premium benefits package and relocation assistance available Job Overview A growing dental laboratory is seeking an experienced Dental CAD/CAM Manager to lead and support its digital design team. This role is ideal for a strong CAD/CAM professional who combines advanced technical knowledge with leadership, organization, and the ability to guide a team in a fast-paced dental lab environment. The right candidate will oversee digital design workflows, support quality standards, troubleshoot technical issues, and help improve efficiency across the department. This opportunity offers a competitive compensation package, premium benefits, incentive opportunities, and relocation assistance for qualified candidates. Key Responsibilities • Lead, support, and mentor CAD/CAM designers and digital team members, • Help manage daily workflow, case assignments, scheduling, and production priorities, • Review digital designs for accuracy, function, fit, and overall quality, • Ensure cases meet internal quality standards and doctor/customer expectations, • Support complex case planning and provide technical guidance to the team, • Help improve CAD/CAM procedures, workflow consistency, and department efficiency, • Troubleshoot digital design, scanning, printing, milling, and software-related issues, • Work with lab leadership and other departments to support smooth production flow, • Monitor department performance and help identify areas for improvement, • Assist with equipment, materials, and resource planning as needed Qualifications • 5–7 years of dental laboratory CAD/CAM experience preferred, • Strong experience with digital dental design workflows, • Proficiency with software and platforms such as 3Shape, Exocad, Meshmixer, desktop scanners, 3D printers, and/or CNC mills, • Prior experience supervising, training, or managing a team preferred, • Strong understanding of dental anatomy, occlusion, case design, and production standards, • Ability to troubleshoot technical issues and support digital production needs, • Strong communication, organization, and leadership skills, • Ability to prioritize deadlines and manage workflow in a busy lab environment, • CDT certification is a plus but not required, • Bachelor’s degree or equivalent experience preferred Compensation & Benefits • $80,000–$100,000 per year, based on experience, • Incentive opportunities available, • Premium benefits package, • Relocation assistance available for qualified candidates Ideal Candidate The ideal candidate is an experienced CAD/CAM dental technician or digital lab leader who enjoys solving technical challenges, supporting team development, and improving digital production processes. This person should be comfortable balancing leadership responsibilities with hands-on technical support when needed.

Job Description We are currently looking for a Substation Physical Engineer from 0 to 5 years of experience. Duties • Assist with create/modify detailed design for Substation:, • Control building (relay panels, facilities, cable raceways, trays, etc.), • Busbar and strain bus, • Equipment & support structures, • Assembly drawings, • Cables and connectors, • Lightning protection and lighting, • Grounding grid, • Conduit and tranches, • Perform basic calculations such as:, • Grounding, • Lighting and lightning, • Cable ampacity, • Tray sizing, • Trench sizing, • Conduit sizing, • Assist project manager to develop scope of work and conceptual design for the projects;, • Communicate and coordinate project activities with project manager, client, and others as needed;, • Take personal responsibility for the quality and accuracy of one's work; Requirements • A Bachelor’s Degree in Electrical Engineering, Mechanical or Civil is preferred., • 0 to 5 years of experience in Substation Physical design., • Willing to pursue PE license in NY and NC., • Desired knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards used in designing substation is critical., • Periodic travel, ability to visit project sites. Salary Range: $60,000 - $86,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Title CNC Operator 1 Department Machine Shop Reports to Machine Shop Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths to work on market-leading programs across a variety of industries. Schedule: Monday-Friday, 2:00 PM-10:30 PM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 2nd Shift. Includes a 5% shift differential. Position Overview: A CNC Operator is responsible for running CNC mills and lathes to produce quality parts by following established setups, work instructions, and inspection requirements. This role focuses on loading material, operating machines safely, monitoring production, and ensuring parts meet specifications using basic measurement tools. Work is performed in a low-mix, high-volume setting where repeatability, attention to detail, and adherence to process are critical. The operator is responsible for monitoring machine operation, performing basic in-process inspection using standard measurement tools, and identifying and escalating issues that impact quality or production. Key Responsibilities: • Operate CNC mills and lathes using existing programs, setups, and work instructions., • Load and unload raw materials, fixtures, and finished parts to support continuous production., • Monitor machine operation and part quality during production runs, identifying issues such as tool wear, dimensional variation, or machine abnormalities., • Make basic adjustments such as tool offsets or feed/speed changes when trained and authorized., • Inspect parts using calipers, micrometers, height gauges, and other standard measuring tools to verify conformance to specifications., • Accurately complete production and inspection documentation in accordance with internal procedures, • Communicate quality or equipment issues to supervision or technical leads for resolution, • Maintain a clean, organized, and safe work area and perform routine operator-level maintenance tasks., • Be available for occasional overtime to support production needs. Required Qualifications: • High School Diploma or GED., • Prior experience operating CNC mills or lathes in a manufacturing environment., • Ability to read basic blueprints and understand part dimensions and tolerances., • Familiarity with standard inspection tools. (e.g., calipers, micrometers, height gauges), • Basic understanding of machining concepts, including feeds, speeds, and tool wear., • Ability to follow established work instructions and perform tasks consistently in a production environment. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and tuition reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Environment & Physical Demands: • Work is performed in a manufacturing environment with CNC equipment, involving exposure to moving machinery, moderate to loud noise, and materials such as oils, coolants, and cleaning agents., • Requires extended periods of standing and active machine operation, including frequent use of hands for loading parts, operating controls, and handling components., • Regular movement between workstations may be required to support production flow., • Use of appropriate personal protective equipment, including safety glasses, is required., • Basic computer use is required for documentation and production tracking., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Schedule: Monday-Friday, 2:00 PM-10:30 PM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 2nd Shift. Includes a 5% shift differential.

Job Description POSITION DESCRIPTION: We are looking for an experienced and commercially minded Product Manager to support a portfolio of physical products, specifically professional hand tools, across the US and Canadian markets. This is a hands-on, hardware-focused product management role encompassing product development, lifecycle management, and market execution. The ideal candidate has a strong foundation in product management, enjoys working cross-functionally, and is looking to grow into a more strategic leadership role within a global product organization. You will collaborate closely with senior product leaders, global R&D and engineering teams, sales, and marketing to bring high-quality professional tools to market. ROLES & RESPONSIBILITIES: Product & Market Execution: • Support the execution of product strategies for the North American market using market, customer, and competitor insights., • Assist in managing the full product lifecycle from concept through launch, optimization, and discontinuation., • Analyze market trends, customer needs, and competitor activity to inform product decisions., • Help define product specifications, features, and value propositions aligned to customer pain points. Product Development & Delivery: • Work closely with global R&D, design, and sourcing teams to support product development projects., • Contribute to product briefs, specifications, and development documentation., • Track project timelines, milestones, and risks to support on-time delivery., • Participate in product testing, validation, and feedback loops. Go-to-Market & Launch Support: • Support successful product launches by coordinating with sales, marketing, and operations teams., • Assist with go-to-market planning including pricing, packaging, and promotional inputs., • Help prepare sales tools, product training materials, and launch communications., • Monitor post-launch performance and gather insights to inform improvements. Commercial & Business Support: • Contribute to business cases for new products, range extensions, and refreshes., • Track product performance, margins, and key KPIs post-launch., • Support range reviews and rationalization activities. Customer & Market Engagement: • Engage with distributors, sales teams, and end users to gather product feedback., • Participate in tradeshows, customer visits, and industry events across the North American region., • Bring the voice of the customer into product decisions. Compliance & Quality: • Support ensuring products meet US and Canadian regulatory, safety, and quality standards prior to launch., • Assist with issue resolution relating to quality, compliance, or performance where required. SKILLS & EXPERIENCE: • 2+ years’ experience in product management or a closely related role., • Experience within tools, hardware, or durable consumer goods preferred., • Exposure to managing products through at least part of the product lifecycle., • Understanding of US and Canadian markets and distribution models., • Strong analytical skills with the ability to interpret data and customer insights., • Good project coordination and stakeholder management skills., • Technical curiosity and the ability to translate product features into customer benefits., • Clear, confident communicator with good presentation skills.

Job Description QUALITY ENGINEER Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. Advantech Industries Inc. is currently recruiting a Quality Engineer to monitor and improve the quality of our operational processes and outputs. DUTIES & RESPONSIBILITIES: The Quality Engineer’s responsibilities include designing quality standards, equipment, process, and products, developing quality control systems, and determining corrective actions. Duties include, but are not limited to, the following: • Review customer quality specification/PO flow downs, codes and technical design documents/drawings to provide an accurate inspection plan., • Participate in contract review meetings to initiate and advise on inspection plans., • Utilize HQA Inspection Manager software to bubble drawings, create FAI reports, and identify critical dimensions to be verified and recorded on an in-process inspection report., • Develop quality plans for manufacturing based on customer RFQ., • Collaborate with operations managers to develop and implement controls and improvements., • Ensure that workflows, processes, and products comply with quality standards and safety regulations., • Investigate and troubleshoot product or production issues., • Develop corrective actions, solutions, and improvements., • Monitor and analyze quality performance., • Update our Quality Management System (QMS) with incidents, fixes and improvements., • Manage calibration system in Inspection Manager Software., • Assign gauging to check critical dimensions., • Work with customers regarding quality questions and issues. SKILLS & QUALIFICATIONS: • Hands on experience with Quality Management Systems (QMS) and testing methodologies., • In-depth understanding of technical documentation., • In-depth understanding of machining and sheet metal fabrication including print reading and GD&T., • Strong analytical and problem-solving skills., • Excellent project management skills., • Solid computer and organizational skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Superior communication skills and ability to develop teamwork among staff., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • High School Diploma or equivalent required., • 5 years of experience in Quality Engineering, Quality Assurance, or a similar role., • Additional certification in Quality Assurance is a plus. JOB BENEFITS: • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $25.00 - $35.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full-Time employment

Job Description Job Title: Chief Advancement Officer Department: Development FLSA Status: Exempt Salary Range: $90,000 - $115,000 Working Hours: Monday – Friday, 8:30 am – 5 pm. Occasional weekend and evening hours to assist with events and Development departmental needs. Direct Supervisor's Name and Title: Pamela Reed Sanchez, President/CEO Position Summary Seneca Park Zoo Society is seeking an innovative, strategic, and results-driven Chief Advancement Officer to help lead the organization through a historic period of growth, including the launch of a next-generation Tropics Center that will set a new standard for excellence. The Chief Advancement Officer oversees the philanthropic fundraising efforts of the Seneca Park Zoo Society and works closely with the President/CEO and Zoo Society trustees to raise necessary support for identified Seneca Park Zoo Society priorities and projects, with an emphasis on broadening and deepening the base of support for the Zoo and Zoo Society. The position has wide-ranging responsibilities for developing and implementing engagement and fundraising strategies to enhance and grow revenue from prospective and current donors for operating, restricted, and capital needs of the organization, and oversees the Chief Philanthropy Officer, Donor Relations Manager, Planned Giving, and Private Events and Corporate Engagement Manager, and Development and Events Assistant. The Chief Advancement Officer holds a portfolio of prospects and donors that include individuals, corporations, foundations, and government sources. DUTIES Operational and Restricted Fundraising: • Identify, qualify, cultivate, and solicit financial support from prospective individuals, corporations, foundations, and government sources., • Create and implement strategies for broadening the prospect pool and the number of active donors to the Zoo and Zoo Society., • Conceptualize, plan, and write corporate, foundation and government proposals as needed., • Drive content and design of solicitation materials, working in conjunction with the Communications team., • Staff lead for Development Leadership Group and Individual Giving Committee; co-staff lead for Events Committee., • Guide the efforts and growth of the Zoo Society's Leadership Council and Partners in Conservation programs., • Financial oversight of the Development, Events and Capital Budget. Capital Campaign Fundraising Oversight: • Oversee the efforts of the Chief Philanthropy Officer to ensure capital campaign progress and success. Events: • Oversee Private Events and Corporate Engagement Manager; ensure meeting business and aspirational goals for all fundraising and private events, including Zoobilation, ZooBrew, Jungle Jog, Spooktacular, Birds Bees & Brews, and other special events. Sponsorships • Work with development team and community volunteers/trustees to secure sponsorships for programs and events to meet budgeted revenue goals. Grants Management • When appropriate, oversee grant applications, track grants, and update grant tracking in Zoo's database system., • Oversee implementation of grant awards, grant reporting and other follow-up to funders. Board of Trustees • This position is the Staff Liaison for the Individual Giving Committee and the Development Leadership Group, provides support for the Events Committee with the Director of Learning and Engagement, and attends Zoobilation Committee meetings as needed., • Attend all board meetings. Miscellaneous Development Items: • Work with the Learning and Engagement team and the Marketing/Communications team to foster cross-departmental collaborations and development initiatives, as well as with County staff when applicable., • Activate trustees specifically for lead generation., • Assist at Special Event fundraisers as needed., • Assist with donor/stewardship events., • Other duties as assigned. SUPERVISION This position directly oversees the Chief Philanthropy Officer, the Donor Relations Manager, and the Private Events and Corporate Engagement Manager, and the department also includes one full-time year-round Development and Events Assistant. TECHNOLOGY/ EQUIPMENT/ TOOLS Desktop/laptop computer MS Office 365 Software (Word, Excel, PowerPoint); Salesforce CRM PHYSICAL ACTIVITY This position requires sitting, walking, standing, speaking, hearing, interacting with Zoo public, visitors, and staff. Will work at a computer for extended periods of time. Some lifting and carrying less than 25 pounds. WORK ENVIRONMENT Work is performed primarily in an office environment with moderate to light noise; teleworking and hybrid models of remote work are possible. The Director of Resource Development is expected to spend many hours away from the office meeting with prospects and donors. Walking to various locations throughout the Seneca Park Zoo will require exposure to outdoor elements. Work schedule will require weekends, evenings, and extended hours as needed to meet the needs of the position. This includes meetings with donors, attending social, professional and community events, attending committee meetings and other activities. Management retains the right to alter work schedules accordingly. Qualifications Education Requirements Bachelor's Degree or equivalent years of experience is required. Experience Requirements • Five plus years of professional fundraising experience with proven record of growing individual philanthropy., • Specific experience asking for contributions as well as stewarding and cultivating donors., • Proven success with Corporate, Foundation and Government grant applications is required., • Prior success in working with trustee's/board members and in serving as staff lead for volunteer committees., • Previous management experience., • Must have excellent communication and organizational skills. Skills and Competencies Requirements Other attributes required are strong communications skills - oral and written, attention to detail, ability to work in a busy office, and an ability to implement and analyze all fundraising programs. Must be highly motivated and enjoy working independently and in a team environment; works effectively with all individual donors, corporate and foundation representatives, volunteers, and staff. Salary and Benefits: This is a full-time, exempt position. Annual salary range is $90,000 - $115,000 commensurate with experience. Some of the benefits available include health insurance plans, HSA, FSA, life insurance, long term disability insurance, dental, vision, 403B retirement plan, holiday, personal, birthday, and sick time benefits. Seneca Park Zoo Society is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job DescriptionDental CAD/CAM Manager Location: Rochester, NY Job Type: Full-time, Onsite Compensation: $90,000–$110,000 per year, based on experience Additional Compensation: Incentive opportunities available Benefits: Premium benefits package and relocation assistance available Job Overview:A growing dental laboratory is seeking an experienced Dental CAD/CAM Manager to lead and support its digital design team.This role is ideal for a strong CAD/CAM professional who combines advanced technical knowledge with leadership, organization, and the ability to guide a team in a fast-paced dental lab environment. The right candidate will oversee digital design workflows, support quality standards, troubleshoot technical issues, and help improve efficiency across the department. This opportunity offers a competitive compensation package, premium benefits, incentive opportunities, and relocation assistance for qualified candidates. Key Responsibilities: • Lead, support, and mentor CAD/CAM designers and digital team members., • Help manage daily workflow, case assignments, scheduling, and production priorities., • Review digital designs for accuracy, function, fit, and overall quality., • Ensure cases meet internal quality standards and doctor/customer expectations., • Support complex case planning and provide technical guidance to the team., • Help improve CAD/CAM procedures, workflow consistency, and department efficiency., • Troubleshoot digital design, scanning, printing, milling, and software-related issues., • Work with lab leadership and other departments to support smooth production flow., • Monitor department performance and help identify areas for improvement., • Assist with equipment, materials, and resource planning as needed. Qualifications: • 5–7 years of dental laboratory CAD/CAM experience preferred., • Strong experience with digital dental design workflows., • Proficiency with software and platforms such as 3Shape, Exocad, Meshmixer, desktop scanners, 3D printers, and/or CNC mills., • Prior experience supervising, training, or managing a team preferred., • Strong understanding of dental anatomy, occlusion, case design, and production standards., • Ability to troubleshoot technical issues and support digital production needs., • Strong communication, organization, and leadership skills., • Ability to prioritize deadlines and manage workflow in a busy lab environment., • CDT certification is a plus but not required., • Bachelor’s degree or equivalent experience preferred. Compensation & Benefits: • $90,000–$110,000 per year, based on experience., • Incentive opportunities available., • Premium benefits package., • Relocation assistance available for qualified candidates. Ideal Candidate:The ideal candidate is an experienced CAD/CAM dental technician or digital lab leader who enjoys solving technical challenges, supporting team development, and improving digital production processes. This person should be comfortable balancing leadership responsibilities with hands-on technical support when needed.

Job Description Title CNC Machinist I Department Machine Shop Reports to Machine Shop Manager Schedule: Monday-Friday, 10:00 PM-6:30 AM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 3rd Shift. Includes a 10% shift differential. SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Position Overview: The CNC Machinist I is responsible for operating, monitoring, and optimizing CNC machining processes to produce high-precision components in a production manufacturing environment. This role requires a strong understanding of machining fundamentals, blueprint interpretation, inspection techniques, tooling, and process control to consistently achieve quality and production objectives. Working from established setups, programs, and process documentation, the CNC Machinist I monitors machining performance, performs advanced inspections, troubleshoots production issues, and makes appropriate process adjustments to maintain dimensional accuracy, quality, and throughput. This position serves as a technical resource within the machining department and plays a key role in supporting safe, efficient, and cost-effective manufacturing operations. Key Responsibilities: • Review and interpret engineering drawings, blueprints, specifications, routers, and work instructions to understand part requirements, tolerances, and machining processes., • Operate CNC mills, lathes, and other machining equipment using established programs, setups, and process documentation., • Monitor machining operations and make appropriate adjustments to offsets, tooling, feeds, speeds, and process parameters to maintain dimensional accuracy, quality, and productivity., • Perform advanced in-process and final inspections using micrometers, calipers, indicators, height gauges, thread gauges, optical comparators, and other precision measuring equipment., • Verify product conformance to dimensional, geometric, and cosmetic requirements and ensure all quality standards are met., • Troubleshoot machining, tooling, quality, and process-related issues and communicate concerns to technical leads or management as appropriate., • Perform tooling changes, tool life monitoring, and wear compensation to maintain stable machining processes., • Assist with machine setup activities, process validation, and first-piece verification when required., • Maintain accurate production, inspection, maintenance, and ERP documentation., • Support continuous improvement initiatives focused on quality, efficiency, throughput, scrap reduction, and cost savings., • Train, assist, and support less experienced operators as needed while promoting best practices within the department., • Perform and document routine operator-level preventative maintenance activities., • Maintain a clean, organized, and safe work environment., • Be available for occasional overtime to support production requirements. Required Skills & Qualifications: • High School Diploma/GED or vocational equivalent required., • Minimum 3 years of CNC machining experience within a precision manufacturing environment., • Demonstrated experience operating CNC mills and/or lathes, including offset adjustments, tooling changes, process monitoring, and troubleshooting production issues., • Ability to read and interpret engineering drawings, blueprints, specifications, and GD&T requirements., • Strong understanding of machining principles including feeds, speeds, tool wear, cutting tool selection, and process control., • Proficiency with precision inspection equipment including micrometers, calipers, indicators, height gauges, thread gauges, optical comparators, and similar metrology tools., • Working knowledge of G-code and M-code programming, including the ability to review and perform minor program edits when required., • Understanding of machine setup principles and machining processes, with the ability to support setup and process validation activities., • Strong mechanical aptitude and problem-solving skills with the ability to identify and resolve machining and quality concerns., • Demonstrated commitment to safety, quality, attention to detail, and continuous improvement. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude; Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Environment & Physical Demands: • This position works primarily in a manufacturing environment supporting CNC machining operations and precision component production., • Requires prolonged periods of standing and walking throughout the workday while operating equipment, performing inspections, and supporting production activities., • Regular use of hands, fingers, and arms to operate machinery, handle tooling, manipulate parts, and perform precision measurements., • Frequent lifting, carrying, pushing, and pulling of raw materials, tooling, fixtures, and finished components. Ability to safely lift up to 50 pounds is required., • Requires frequent bending, reaching, twisting, crouching, and movement around machining equipment and workstations., • Regular use of precision measuring equipment including micrometers, calipers, indicators, height gauges, comparators, and other metrology tools., • Requires visual acuity sufficient to inspect parts, identify defects, verify dimensions, review technical documentation, and safely operate equipment., • Frequent interaction with CNC mills, lathes and other manufacturing equipment containing moving mechanical components., • Regular exposure to machine oils, coolants, metal chips, lubricants, cleaning agents, and other manufacturing-related materials., • Safety glasses with side shields and other required personal protective equipment (PPE) must be worn in designated manufacturing areas., • Noise levels are typically moderate to loud and may require hearing protection in designated areas., • Requires routine use of computers and manufacturing software for reviewing work instructions, documenting production activities, accessing ERP systems, and recording inspection data., • May work across multiple machining cells, equipment platforms, or departments based on production requirements and business needs., • Occasional overtime may be required to support production schedules, customer commitments, and departmental objectives. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Schedule: Monday-Friday, 10:00 PM-6:30 AM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 3rd Shift. Includes a 10% shift differential.

Job Description LaBella is currently seeking a Project Manager in Civil Engineering in our Land Development Group out of our Rochester, Syracuse, or Buffalo Offices. • Independently manage Land Development Civil Engineering projects from start to finish with a team of junior engineers. Includes overseeing the preparation of Civil Engineering Site Plans from conceptual design through construction documents. Includes preparation of Stormwater Pollution Prevention Plans., • Project management responsibilities include client interaction, meeting attendance, mentorship of junior level staff, preparation of professional service proposals, preparation of request for proposals, coordination with Architects and MEP engineers, attendance at public presentations, project invoicing, agency approvals. Requirements • Bachelors Degree in Civil Engineering., • 8+ years of experience with demonstrated success in a professional consulting environment., • Strong Land Development Design experience including preparation of Site/Grading/Utility Plans, Construction Details, and Conceptual Layout plans. Stormwater Design experience including preparation of Stormwater Pollution Prevention Plans. Experience obtaining agency approvals., • Experience in project management. Ability to effectively manage project budgets and workload by delegating to junior staff., • Strong written and verbal communication skills. Candidate should possess the ability to interact effectively with clients, project teams, colleagues, and outside agencies. Ability to collaborate efficiently with teammates in different disciplines and in different locations., • Strong critical thinking, problem solving, and attention to detail skills. Ability to make decisions by weighing different factors from multiple points of view., • Registration as a Professional Engineer (PE) is encouraged., • AutoCAD and HydroCAD experience is preferred., • Construction administration experience is preferred. Salary Range: $90,000.00 - $120,000.00 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionPEKO is a full-service, debt-free, privately-owned contract manufacturer with over 60 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Electrical Engineer Primary Function: The Electrical Engineer is responsible for machine control hardware and software design, procurement of components, startup, debugging, calibration and verification. This individual will assist with the designing of electrical power and control systems for industrial and commercial equipment used in medical, pharmaceutical, alternative energy, semi-conductor and other industries. They will be supporting the NPI (New Product Introduction) group in the development of new product design and introduction, functional specifications, technical design, automated assembly, development and testing within PEKO and for our customers. Essential Functions: • Create and review electrical schematics, wiring diagrams, and other technical documentation., • Develop and maintain PLC software for various applications, including automation, process control, and robotics., • Assist in creating specifications, critical parameters and statement of work., • Apply knowledge in electrical power transmission, controls systems, programing, wiring/panel design, automation for design and development., • Conduct thorough electrical testing and troubleshooting to ensure system functionality and reliability., • Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment., • Collaborate with mechanical engineers, software engineers, and technicians to integrate electrical systems into complete electromechanical assemblies., • Participate in all phases of the product lifecycle, from concept and design to manufacturing, testing, and installation. Basic Qualifications: • Bachelor's degree in Electrical Engineering or a related field., • Understanding of PLC programming (e.g., Allen-Bradley, Siemens, Rockwell)., • Familiarity with electrical schematic design and drafting software (e.g., AutoCAD Electrical, EPLAN)., • Experience with electrical testing equipment and procedures., • Excellent analytical, problem-solving, and troubleshooting skills., • Strong communication, interpersonal, and teamwork skills., • Ability to work independently and as part of a team., • Proficiency with component selection and sizing for electrical systems (e.g.relays, circuit breakers, wire sizing, power supply sizing)., • Knowledge of text-based languages; C, Java., • Knowledge of best practices for industrial controls, working knowledge of NFPA/NEC code for electrical system design. Preferred Qualifications:, • 3+ years of experience in electromechanical hardware and software design and development., • Knowledge of Python is a plusReports To: NPI Engineering Manager Work Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Recognition Awards & Discretionary Benefits Our Core Values: • Compassion: We care about our talented and loyal PEKO family., • Safety: We are committed to providing a safe, clean, and positive workplace., • Integrity: We believe in transparency, honesty, and respect for all stakeholders., • Agility: We are dedicated to maintaining an agile and financially prudent organization., • Endurance:We foster the belief that PEKO people are resilient problem-solvers impacting the future., • Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $80,000 - $90,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR IWUHlOUmGF

Job Description Location: Rochester, NY Summary: We are seeking an experienced and innovative manager in the Optics and Photonics space to guide QED’s Applications Engineering team. This leadership role requires strong skills in team management, mentoring, customer support, sales and product development. The successful candidate will collaborate closely with cross-functional teams—including Sales, Customer Support, R&D, Quality, and Manufacturing—to ensure our customers are extracting as much value as possible from our products and that our products are meeting the needs of today’s – and tomorrow’s – customers. At QED, Applications Engineers are the “expert users” of QED’s polishing and metrology products. They are customer-facing, but also support internal development initiatives. They act as process engineers, teachers, and salespeople as they perform their various job functions. Their main activities can be separated into 3 main responsibilities: • Provide process support for existing customers (including polishing/metrology validations during installation, basic & advanced training, process optimization and process troubleshooting), • Provide Sales & Marketing with technical support (including tech support during customer meetings, capability analyses, product demonstrations, trade show support, and marketing material support), • Provide R&D and Engineering with VOC input for new product developments (including defining customer requirements, testing support for new developments, and design review support) Based in Rochester, New York, QED Technologies is a leading capital equipment manufacturer serving the global precision optics industry. Our innovative solutions enable the production of high-quality optical components with superior accuracy. We are committed to driving future growth through innovation, excellence, and customer satisfaction. Essential Duties and Responsibilities: • Team Leadership & Mentorship, • Lead and manage a global team of 6-10 applications engineers and interns from varied backgrounds, providing guidance, coaching, and performance feedback., • Foster a collaborative and innovative team environment, encouraging open communication and knowledge sharing., • Set priorities and schedule activities that span Sales, Customer Support, Manufacturing and R&D, in a dynamic organization, often with competing demands., • Develop/maintain departmental training and process documentation to ensure consistency and quality as new engineers are onboarded., • Customer Experience Center (CEC) Management, • Oversee the operation of QED’s demonstration and training center. This area is where Applications Engineers perform product demonstrations, and training sessions for our products. Ensure room/equipment is maintained in a clean and organized condition, compliant with all of QED’s SH&E guidelines, so as to create an efficient work area that is suitable to “show off” to visiting customers at all times., • Support/schedule machine time for Manufacturing & R&D activities. The CEC is a shared space that other groups use when they need to use or test equipment on our products., • Technical Sales & Marketing Support, • Work closely with the Sales team and potential customers - either directly, or through the team – to provide the necessary technical information they need to close opportunities. This can be through product demonstrations, capability analyses, customer meetings or trade shows., • Customer Demonstration Process Management: Ensure the team provides effective and efficient customer demonstrations, starting from gathering clear goals and requirements from the customer through defining the demonstration plan to maintain the equipment in top-notch condition to effective report writing and customer communication., • Support technical content creation (e.g. white papers, case studies, social media posts, YouTube videos) for the QED’s marketing initiatives., • Publish/present technical papers – either directly, or through the team – at trade shows or conferences to highlight new capabilities of our technology., • Customer Support, • Work closely with our customers – either directly, or through the team – to provide the necessary technical information they need to most effectively utilize the products we sell them. This can be through remote support or onsite support, and come in the form of basic training, advanced training, process optimization, new process development initiatives., • Work closely with Customer Service Manager to ensure all customer requests are getting tracked and closed in a timely manner., • Machine Order Process Support, • Work closely with Sales, Operations and Customer Support to ensure new machine orders are managed properly, from acceptance test definition at order time through installation scheduling and final customer training and machine acceptance., • Engineering & Operations Support, • Provide team member support to various R&D, NPD and CI projects in order bring the Voice of Customer feedback they gain and collect as they work with customers to the product development and qualification initiatives of our company., • Balance the often competing demands of manufacturing, product development, customer support and sales, based on the needs of the business., • Cultivate New Business Opportunities, • Identify and explore new applications and/or markets for QED’s technology, through process development initiatives in the CEC. Work with R&D as necessary to push new developments in fluid, software, or hardware. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Education and/or Experience, • Minimum B.S. in Optical Engineering (or a closely related field of study) with 7+ years of relevant industry experience (MS or PhD preferred)., • Experience in the Precision Optics industry, Photonics industry, Semiconductor manufacturing industry, or other precision manufacturing industries., • Other Skills and Abilities, • Proven experience in managing projects, teams and individuals, • Proven experience in mentoring junior engineers., • Strong leadership, communication, and presentation skills for global audiences., • Ability to manage multiple priorities and drive results in a fast-paced environment, • Technical Excellence, • Drive the team to develop a deep understanding of our technologies do that they understand the “why’s” not just the “what’s” of our products so that they can respond to our customer’s process challenges quickly and effectively, • Cultivate a “measure twice, cut once” mentality so that customer demonstrations and other activities are done right the first time, • Set high standards for performance and communications (e.g. customer reports). Lead by example. Work Location The primary work location for this position is QED’s main headquarters, 1040 University Avenue, Rochester, NY 14607. Employee may be permitted to work from home for some tasks, at the discretion of the employee’s manager. Applicants must reside within commuting distance of our Rochester, NY location. Relocation will not be provided for this role. Travel Domestically and internationally (~10-15%), may be required in order to perform the essential functions of this position. All candidates must possess a current US passport and not have restrictions regarding travel. QED Technologies is an equal opportunity employer. We value diversity. However, due to our ITAR status, we are unable to provide visa sponsorship at this time. Therefore, all applicants must be permanently authorized to work in the United States and will not require visa sponsorship now or in the future. The salary offered will be determined based on comparing the selected candidate's education, experience and special skills, with the current QED employee population to ensure internal compensation equity.

Job Description Job title: Cad Cam Manager - all on x Team Location: New York Salary: 80-100k Benefits: Full benefits relocation assistance if needed Position Overview We are seeking an experienced, detail-oriented, and forward-thinking CAD/CAM Manager to lead the digital department of our dental laboratory. In this role, you will oversee all digital design, scanning, nesting, and milling operations, ensuring the highest standards of precision, efficiency, and quality for fixed, removable, and implant restorations. The ideal candidate possesses deep technical expertise in dental CAD/CAM software and hardware, strong leadership skills, and a passion for staying at the cutting edge of digital dentistry. • Lead & Empower: Take charge of hiring, scheduling, and team assignments. Mentor designers and leads with supportive, timely feedback to help them grow in their careers., • Drive Quality: Oversee design accuracy and production quality to ensure every component fits clinician specifications perfectly., • Innovate & Streamline: Refine operating procedures, partner with lab leadership on R&D initiatives, and offer high-level guidance on complex cases., • Manage Technology: Keep our software and hardware running smoothly. Provide hands-on troubleshooting and technical support across platforms like 3Shape, Exocad, Meshmixer, 3D printers, and CNC mills., • Analyze & Improve: Track performance metrics to spot bottlenecks early and roll out strategic adjustments that boost efficiency., • Optimize Resources: Partner with the Inventory Manager and team leads to keep materials stocked and workflows uninterrupted., • Leadership Style: Exceptional communication, motivational skills, and a supportive approach that champions continuous learning., • Strategic Mindset: Strong decision-making abilities with a knack for hitting tight deadlines and streamlining processes., • Technical Background: 5 to 7 years of dental laboratory experience as a CAD/CAM technician, backed by advanced proficiency in 3Shape, Exocad, Meshmixer, and desktop scanners., • Management Experience: At least 2 years of experience supervising or managing a team., • Education & Credentials: A Bachelor’s degree (or equivalent) and a Certified Dental Technician (CDT) designation are both preferred. Your craftsmanship here has a real, tangible impact on people's lives. You'll be stepping into a collaborative culture dedicated to quality, continuous improvement, and helping patients regain their confidence through exceptional full-arch restorations. :

Job Description At Century Mold, we don't just mold parts, our customers come to us with their toughest challenges … and we mold solutions. The plastics industry is full of challenges and the Century Mold team prides themselves on their problem-solving capabilities. We strive to provide and deliver more not only for our customers but for our team as well. Essential Duties and Responsibilities • Has responsibility for completing all quality checks and paperwork associated with job tasks., • Test, inspect, troubleshoot, and repair faulty or damaged tooling., • Analyze drawings, sketches, and design data of parts to determine tool specifications and tolerances., • Keep presses operational., • Perform preventative maintenance on molds., • Restore damaged surfaces and re-machines to specifications., • Reassemble, test, and adjust tooling., • Perform slide changes., • Check water flow on higher volume tooling., • Knowledgeable in the areas of mold and tool making., • Perform other repairs, corrections, and engineering changes to molds as requested by Production Tooling Manager., • Teach and guide apprentices through all facets of mold making. Education and/or Experience: Four to ten years related experience and/or training with Journeyman or Master craftsman certification; or equivalent combination of education and experience Computer Skills: Proficient with Microsoft Office Suite; Ability to learn new software as needed. Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department. 2:45 p.m.-11:15 p.m.

Job DescriptionDescription: East House is a dedicated non-profit organization committed to supporting individuals on their journey to recovery. We provide comprehensive services, including residential support, counseling, peer support and community outreach to empower individuals to overcome mental health and substance use disorders and lead fulfilling lives. Our mission is to foster a supportive environment that promotes healing and long-term recovery, while upholding our humanistic, optimistic, progressive, and collaborative values rooted in integrity. The Crisis Care Manager II at Affinity Place Crisis Residence plays a crucial role in assisting and empowering our guests during their time of crisis. Key responsibilities include delivering comprehensive case management services and coordinating integration of direct care and support services. As a part of our commitment to individualized person-centered care, Crisis Care Manager II takes an active part in devising post-discharge continuity of care plans. Our ultimate goal is to facilitate our guests' journey towards recovery, empowering them to lead self-directed lives and realize their full potential. In compliance with NYS's Pay Transparency Act, the salary range for this position is listed above. East House considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. The hiring process for this position may require a criminal background check and/or motor vehicle records check. Any verbal or written offer made is contingent on satisfactory results, as determined by Human Resources. Responsibilities Services That Address Client Goals · Comprehensive Care Management, Care Coordination, Integration of Direct Care and Support Services, Assistance with Basic Needs, Continuity of Care Provides appropriate interventions based on guests' goals and documents guest progress. · Partners with guests in creating/pursuing individualized service plan goals which are based on guest-identified goals and objectives. The service plan is accessible and reflects patient and supports preferences (if applicable), education and support for self-management, self-help recovery, and other resources as appropriate. Maintains the safety of guests and the facility through regular environmental monitoring and crisis response. · Completes comprehensive guest assessments including mental health and substance use disorder assessments, risk assessments, health screenings, and crisis planning. · Collaborates with guests to build a psychiatric advanced directive, ensuring their wishes are known and can be followed in times of crisis. Conducts check-in and check-out activities and facilitates groups and activities. · Coordinates client services in an extensive community network; advocates for client’s mental health, chemical dependency, medical, financial, legal, social, career, housing and recreational services; coordinates transportation as needed. Provides outreach to guests to encourage participation and support. · Develops and maintains positive and effective relationships with landlords, community groups, referral sources and service agencies. · Participates in regular case reviews in order to track progress of care plan goals and initiate changes in the care plan as needed. · Maintains a body of knowledge regarding best/evidence-based practices and community centered resources; receives training/higher education to augment skill set. · Design and conduct a weekly group meeting tailored to address current guest needs. Applies a holistic approach to consider the entirety of the client's situation, providing well-rounded, comprehensive support. · Design and implement in-house guest enrichment activities tailored to foster peer connections and promote community integration. This aims to enhance the guest experience and encourage mutual support and social engagement. Clients are Supported Through Effectively Coordinated Functions · Coordinates activities and maintains appropriate schedules for location. · Collaborates with community agencies to identify resources. · The role involves actively connecting guests to pertinent community resources and coordinating with both new and existing healthcare providers. Individual enrichment skills also assists guests with securing basic needs like food, clothing, and housing. · Maintains organized resources within the facility. · Maintain an active Resource for others to utilize while assisting guests during crisis. · Facilitates various trainings, workshops, groups and activities, as needed. · Engage Guest in enrichment groups such as life skills, Community Resources, Conflict Resolution, and Self-Resiliency. · Provides outreach to clients. · Ensuring they receive continuous support post-discharge. Daily Living Skills · Assists in the daily operation of the residence (e.g., light housekeeping, cooking, food and supply purchasing, etc.). · Supervises and coaches clients in working toward functional skills necessary with independent living (i.e. cleaning, meal preparation, and safe and sanitary conditions within the group home/apartment, etc.) Safely Managed Medications · Provides supervision of clients in managing their medications. · Adheres to East House medication policies and procedures. · Medication documentation and supervision meets East House standards 100% of the time · No medication errors Documentation Standards Met · Maintains documentation to the standards defined by regulators, funders and East House policies and procedures · Meets documentation standards as evidenced by audits, chart reviews, and recertification reviews Other Duties · Follows all applicable policies, federal and state laws, and East House compliance standards. · Collaborates with the Office of Ethics, Compliance & Quality to address non-compliance, and document corrective actions. · Meets documentation standards as evidenced by audits, chart reviews, and recertification reviews · Demonstrated ability to assess, monitor and evaluate needs and progress in program. Note: This job description may not cover all job duties and is subject to change without notice. Job duties, responsibilities, and/or activities may change at any time with or without notice. Requirements: Minimum Education/Experience • High School + 2-5 yrs. Exp; OR,, • Associates + 1-3 yrs. Exp; OR,, • Bachelors + 0-1 yr. Exp Licensure/Certifications • NYS motor vehicle license, safe driving record and availability of personal vehicle for work., • Qualified Mental Health Staff as defined by OMH Residential regulations required for work in OMH licensed programs., • Provisional Qualified Health Professional Status or CASAC-T per OASAS Operating Regulations required in OASAS licensed programs. Counselors hired as Provisional QHP Status must obtain their CASAC or other QHP status within 3 years., • Narcan training (required for OASAS licensed/funded programs) Other Skills/Knowledge/Experience • Effective written and oral communication skills, • Ability to work cooperatively and effectively with culturally diverse clients, staff and community service providers., • Basic Computer Literacy as evidenced by the ability to go online and conduct basic searches on the Intern, check his/her email account, create and send email with an attachment and use simple email features. Can open spreadsheets and word processing documents to read and make simple edits., • Basic Microsoft Word skills as evidenced by the ability to produce basic business letters and simple tables and charts; as well as check spelling, set tabs, change page orientation, sort, save, open and organize electronic files. Physical Demands • Job frequently requires sitting, handling objects and paperwork, work with a computer and communicating with others both verbally and in written format., • Job involves occasional lifting of up to 30 lbs., walking, standing and reaching., • Finger dexterity to a level that allows the ability to operate a telephone and computer keyboard., • Hearing needed to a level that enables one to hear normal conversation., • Visual requirements to the level of being able to read documents and a computer screen., • Ability to read and interpret policies, procedures and various other information., • Ability to maintain emotional control under stressful situations. Working Conditions/Work Environment Traditional office environment. Occasionally subjected to pressure due to time demands. Travel within the greater Rochester area. Potential for travel outside of Monroe County. Physical Demands The physical demands/work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, talk, hear, stand, walk, ability to reach above or below shoulders, use hands to type and/or perform light lifting and occasional stair-climbing. Reasonable Accommodation East House provides reasonable accommodations to applicants with disabilities under the Rehabilitation Act, the Americans with Disabilities Act, the New York Human Rights Law, or similar applicable law. If you need reasonable accommodation for any part of the application and hiring process, please contact the Human Resources office at 585-238-4800 or email your request to HRTeam@easthouse.org. Determinations on requests for reasonable accommodation will be made on a case-by-case basis. EEO Statement East House provides equal opportunity to all qualified individuals and does not discriminate on the basis of race, color, creed, age, marital status, sex, gender, religion, sexual orientation, gender identity, gender expression, national origin, veteran status or disability, or any other protected statuses in its hiring, promotions, and other employment activities.

Job Description Position Summary We are seeking an experienced Design Project Manager to support our projects from concept through completion, someone equally comfortable producing construction documents in Revit/AutoCAD as they are running a job site inspection. This is a niche, hands-on role, and we're selective about who fills it. Key Responsibilities • Prepare and revise construction documents in Revit and AutoCAD, including layouts, detail drawings, and diagrams., • Make drawing changes, redlines, and specification updates as projects develop., • Prepare presentation drawings and plan options for clients., • Track submittals, RFIs, and approvals; review shop drawings and estimates with architects, engineers, and contractors., • Coordinate and lead project meetings; manage communications and action items., • Conduct on-site inspections and field verification, documenting quality, code compliance, safety, and progress., • Assist with permitting across local, state, and federal jurisdictions., • Prepare and distribute weekly project updates with progress photos. Qualifications • Bachelor's degree in Architecture, Architectural Engineering, Drafting, Design, or related field (or equivalent experience)., • 10+ years of experience in architectural design, drafting, or construction project management., • Strong proficiency in Revit and AutoCAD, plus Microsoft Office and MS Project., • Solid understanding of drafting techniques, construction terminology, and general building code., • Valid New York State driver's license and reliable transportation., • Ability to work independently, manage multiple projects, and exercise sound judgment with minimal supervision., • Familiarity with owner's representation or construction administration is a plus. Work Environment & Physical Demands • Regular field work, including site visits over uneven terrain and in variable weather, plus occasional lifting up to 25 to 50 lbs., • Occasional travel and irregular hours around project milestones. Why Join DJCA Cornerstone • Family-oriented culture with mutual respect and teamwork., • A seat on some of Rochester's most visible projects., • Real autonomy in your role, with a clear path for growth as our project list expands. DJCA Cornerstone LLC and its subsidiaries are committed to creating a diverse environment and are proud to be an equal opportunity employer.

Job Description Keller Executive Search is partnering with a leading manufacturing organization to appoint an experienced Quality Systems and Risk Management Manager. This is a pivotal role for a quality professional who thrives at the intersection of systems governance, regulatory compliance, and proactive risk management, and who wants to make a measurable impact on product quality and operational excellence. Reporting into senior leadership, you will own the design, maintenance, and continuous improvement of the quality management system while leading a structured approach to risk identification, mitigation, and control across the product lifecycle. You will work cross-functionally with operations, engineering, supply chain, and external partners to ensure that quality standards, regulatory requirements, and customer expectations are consistently met. This is an excellent opportunity for someone ready to shape quality strategy, strengthen audit readiness, and embed a culture of continuous improvement. Our client values rigor, collaboration, and forward-thinking problem solving, and offers a stable, growth-oriented environment where quality leadership is genuinely valued. Key Responsibilities • Own, maintain, and continuously improve the quality management system to ensure ongoing compliance with applicable standards and regulations, • Lead the organization's risk management program, including risk assessments, mitigation planning, and corrective and preventive actions (CAPA), • Plan, conduct, and coordinate internal and external audits, and manage responses to regulatory and customer audits, • Develop, review, and control quality documentation, procedures, and records to support audit readiness, • Manage supplier and contract-manufacturer quality, including qualification, monitoring, and periodic on-site assessments, • Analyze quality data and trends to drive root-cause investigations and measurable improvements, • Partner with operations, engineering, and supply chain to embed quality and risk controls across the product lifecycle, • Lead, mentor, and develop quality staff and champion a culture of continuous improvement, • Prepare and present quality and risk metrics and reports to senior managementAdditional Information, • Location: United States; specific site details shared later in the process., • Working pattern: primarily on-site with occasional remote flexibility based on business needs. Requirements Essential • Bachelor's degree in engineering, quality, life sciences, or a related technical field, • 5+ years of experience in quality systems, quality assurance, or quality management within a manufacturing or regulated environment, • Working knowledge of ISO 13485, FDA Quality System requirements, and ISO 14971 risk management principles, • Practical knowledge of risk management methodologies and CAPA processes, • Experience planning and conducting internal and external audits, • Strong analytical, documentation, and problem-solving skills, • Ability to work on-site as the primary work locationPreferred, • Professional certification such as CQE, CQM, CQA, Six Sigma, or Lead Auditor, • Experience with regulated or highly controlled manufacturing environments, • Prior people-management or team leadership experience, • Experience managing supplier or contract-manufacturer quality, • Experience with electronic quality management systemsIdeal Candidate Profile You are a detail-driven yet strategically minded quality leader who balances compliance discipline with practical, continuous-improvement thinking. You communicate clearly across functions, influence without authority, and stay calm and organized during audits. You take ownership of quality outcomes and enjoy building robust systems that scale. Benefits • Relocation support is available for candidates who are not local; this can be structured as coverage of relocation costs or as a flat sign-on bonus to help the successful candidate make the move., • This is primarily an on-site role with limited flexibility for occasional remote work based on business needs and responsibilities., • Only limited travel is expected, typically a few trips per year for supplier or contract-manufacturer visits, audits, or industry events; site visits can be covered by other team members where travel is not feasible. Keller is a recruitment agency that provides services to clients ranging from startups and non profits to multinational corporations. Keller emphasizes ethical search processes, attentive candidate care, and leadership placements that support long-term client outcomes. To learn more about the firm and about our candidate services - please visit our website Equal Employment Opportunity and Non-Discrimination Policy Equal Employment Opportunity Statement: Both Keller Executive Search and our clients are Equal Opportunity Employers. For all positions, whether with Keller Executive Search or our clients, qualified applicants will receive consideration for employment without regard to race, skin color, religion, sex, sexual orientation, gender identity, gender expression, national origin, age, protected veteran status, disability, genetic information, or any other legally protected status. Commitment to Diversity: Keller Executive Search and its clients are committed to fostering a diverse and inclusive work environment where all individuals are valued and respected. Reasonable Accommodations: Both Keller Executive Search and our clients are committed to providing reasonable accommodations to individuals with disabilities and pregnant individuals. We engage in an interactive process to determine effective, reasonable accommodations. Compensation Information: For client positions, compensation information is available in the job post. If not provided, it will be shared during the interview process in accordance with applicable laws. When required by law, salary ranges will be included in job postings. Actual salary may depend on skills, experience, and comparison to current employees in similar roles. Salary ranges may vary based on role and location. Compliance with Laws: Both Keller Executive Search and our clients comply with federal, state, and local laws governing nondiscrimination in employment. This policy applies to all employment terms and conditions, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Workplace Harassment: Both Keller Executive Search and our clients expressly prohibit any form of workplace harassment based on race, skin color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. E-Verify Participation: Keller Executive Search and/or our clients may participate in E-Verify. Information about E-Verify participation will be provided during the application process where applicable. Privacy and Pay Equity: • California Residents: For more information about the categories of personal information we collect for recruiting and employment purposes, please review our Privacy Policy at www.kellerexecutivesearch.com., • Colorado, Nevada, New York City, California, and Washington Residents: Compensation information is available in the job post or will be provided during the interview process if not initially available., • Both Keller Executive Search and our clients are committed to pay equity and conduct periodic pay equity analyses in accordance with applicable laws. State-Specific Information: • Rhode Island: We do not request or require salary history from applicants., • Connecticut: We provide wage range information upon request or before discussing compensation., • New Jersey: We do not inquire about salary history unless voluntarily disclosed. Veteran Status: Both Keller Executive Search and our clients provide equal employment opportunities to veterans and comply with applicable state laws regarding veteran preference in employment. If you are a veteran, please inform us during the application process. Use of Artificial Intelligence in Recruitment Keller Executive Search and our clients may use artificial intelligence (AI) tools to assist in the recruitment and candidate evaluation process. These tools are used exclusively to support human decision-making by helping to review and assess candidate qualifications and materials. AI is never used to automatically reject, disqualify, or make final hiring decisions about candidates. All AI-assisted evaluations are reviewed by experienced recruitment professionals, and all hiring decisions are made by qualified human recruiters. Our use of AI is designed to enhance fairness, consistency, and efficiency while maintaining our commitment to equal employment opportunity and non-discrimination principles. Genetic Information: In accordance with federal and state laws, both Keller Executive Search and our clients do not discriminate based on genetic information. We do not request or require genetic information from applicants or employees, except as permitted by law. Local Laws: Both Keller Executive Search and our clients comply with all applicable local laws and ordinances regarding employment practices in the areas where we operate. Note: This job posting may be for a position with Keller Executive Search or one of our clients. The specific employer will be identified during the application and interview process. Employment laws and requirements may vary depending on the employer and location.

Job Description K&A Power Group – is a privately held engineering firm delivering worldclass technical expertise and engineering excellence to power utility and industrial clients across the United States, Asia, the Middle East, and Africa. We provide comprehensive consulting, engineering and design, program and project management, construction management, and EPC services, specializing in substation, transmission, distribution, and distributed energy resources. We pride ourselves on attracting and developing top talent, building a culture of excellence, and building meaningful, long-term relationships with our employees, clients and communities, wherever they are in the world. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Scheduler & Cost Controller to join our team at K&A Power Group in Binghamton, NY. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: Role Expectations: • The Scheduler and Cost Controller is required to produce a variety of regular and ad-hoc reports in support of our project planning and control initiatives. Working closely with all functional departments, the Cost Controller plays a key role in ensuring that policies, procedures, and standards are adhered to., • Verifying the accuracy of all cost information – including confirmation that costs have been properly coded and allocated to the project budget. Producing required accounting and project cost reports. Producing reports on deviations, under-runs and over-runs. Preparing forecasts and cost trend reports. Reviewing and evaluating trends and their impact on project costs. Monitoring project costs and commitment to budget and forecast. Maintaining change control and the change order Assessing progress measurement and developing/updating progress curves for progress reporting. Responsible for EVM during all project stages., • Develop an Integrated Master Schedule of the project according to Customer standards and approved scheduling tool., • Develop and evaluate the activities in the Integrated Project Schedule that affect the project and be able to capture work that can be completed in six (6) month Look-Ahead increments including work on critical path, work with less than 2 weeks float, work that can be consolidated, and work required to support that which is compatible with other projects., • Develop Project Sequence/Logic – preparation of project schedules that accurately identify the interrelationship of activities to be performed by the various disciplines and Third-Party involvement in the project., • Perform Current Schedule and Cost (EV, AC) vs. Performance Measurement Baseline, compare and highlight major activity deviations between the original baseline and the current plan based on monthly updates., • Perform Critical Path Analysis, identify and analyze critical paths/activities to ascertain project completion in time and in budget, including forecasting delays and evaluation of alternative scenarios., • Overall responsibility for providing guidance to other project personnel on good scheduling practices and techniques., • Customer Manager Planning and Control will coordinate Scheduler-Cost Controller Group to ensure the accomplishment of the Portfolio planning and control goals., • Scheduler-Cost Controller Group will work under Manager Planning and Control who will provide direction and oversight., • Produce a variety of regular and ad-hoc reports in support of our project planning and control initiatives., • Work closely with all functional departments, the Controller/Cost Analyst plays a key role in ensuring that policies, procedures, and standards are adhered to., • Responsible for developing, implementing, feeding, reconciling and maintaining valuable project control databases and reports for projects., • Manages and ensures the reconciliation of program controls data with financial and performance systems, coordinating with Project Managers., • Verifies the accuracy of all cost information including confirmation that costs have been properly coded and allocated to the project budget., • Producing required accounting and project cost, • Producing reports on deviations, under-runs and over-, • Preparing forecasts and cost trend, • Reviewing and evaluating trends and their impact on project, • Monitoring project costs and commitment to budget and, • Maintaining change control and the change order, • Assessing progress measurement and developing/updating progress curves for progress reporting., • Responsible for EVM during all project stages. What we’re looking for: • Minimum 3 years of experience in Project Controlling and 4 years of experience in Construction Project Scheduling required, • Bachelor’s degree preferred, • CAPM or PMI-SP Certificate or equivalent (requires Avangrid approval), • SAP experience required, • Primavera (preferred) and/or MS Project experience required, • Experience in the functional area under which it will be contracted: Substations, T&D, Gas-Hydro and OSG Pay Range $85,000—$110,000.00 Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with company match), • Lifestyle Spending Account (LSA), • Paid Parental Leave after 12 months of employment, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, • Long-Term Disability, Short-Term Disability, and Life Insurance, • EAP (Employee Assistance Program), • Parking and Transit Reimbursement, • Pet Insurance Check out our career page for more information! The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description Take ownership. Lead with purpose. Design what’s next. We’re looking for an experienced Architectural Project Manager who wants more than a title. We’re looking for someone who wants to take control of projects, lead teams, build strong client relationships, and deliver comprehensive, thoughtfully designed work. At C&S, we believe great projects come from the combination of great design, strong project leadership, and great client experiences. Our teams are collaborative by nature, bringing together architects, interior designers, engineers, planners, and other specialists to solve problems and create better outcomes. We also believe the best teams make room for individual strengths and interests - and know how to put those talents to work for the project. The Role As an Architectural Project Manager, you’ll lead projects from programming and concept through documentation, construction, and closeout. You’ll be responsible for the big picture while staying engaged in the design and technical decisions that make a project successful. You’ll: • Lead project teams and coordinate multidisciplinary consultants., • Manage project scope, budgets, schedules, resources, and quality., • Serve as a trusted, primary point of contact for clients., • Guide projects through design, documentation, bidding, and construction., • Protect design intent while balancing budget, schedule, constructability, and owner priorities., • Lead project planning, communication, and decision-making., • Review design and technical documentation for quality and completeness., • Participate in programming, feasibility studies, proposals, and business development., • Mentor and support architects and designers while helping build stronger project teams. Most importantly, you’ll own the outcome. We want PMs who are comfortable making decisions, anticipating problems, bringing people together, and pushing a project forward. What We’re Looking For You’re an architect and project leader who combines design judgment with strong project management skills. You understand that a successful project is not simply one that gets built—it’s one that meets the client’s goals, performs technically, respects the design, and creates an experience people value. You’ll bring: • Bachelor’s or professional degree in Architecture from an accredited program., • 8+ years of professional architectural experience., • Strong architectural design and project management experience., • Experience leading projects from concept through construction., • A comprehensive understanding of design and construction documentation., • Experience managing project budgets, schedules, teams, and consultants., • Strong knowledge of applicable building codes and regulations., • Strong communication and client relationship skills., • The ability to take ownership, make decisions, and lead collaboratively., • Revit proficiency preferred., • Professional architectural licensure preferred., • Experience in municipal, commercial, higher education, healthcare, or similar project types is a plus. Why C&S? We’re a multidisciplinary firm with the resources and capabilities to take on complex work, but we’re intentional about maintaining a collaborative environment where people know each other, ideas are heard, and individuals can make an impact. You’ll have room to grow vertically through greater project complexity, leadership, and client responsibility—and horizontally by developing the interests and expertise that make you uniquely valuable. If you’re ready to take ownership of meaningful projects, work alongside talented people, and help deliver architecture that is both high quality and highly valued by the people we serve, we’d like to meet you. C&S supports a 60/40 hybrid work environment, providing flexibility while preserving the collaboration and connection that help design teams perform at their best. This position is based in our Rochester office, but could also work from our Buffalo or Syracuse offices as well with the right fit. Estimated Salary Range: $95,000–$125,000 *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Senior Computer Vision and Deep Learning Engineer Department: Product Design Services FLSA Status: Exempt Reports to: PDS Operations Manager Pay Range: $120,600 - $174,800 annually Location: Rochester. NY The Role: D3 Embedded is seeking a skilled Computer Vision and Deep Learning Engineer to develop and implement cutting-edge AI solutions. This role involves designing, training, and optimizing deep learning models for image and video analysis, object detection, and pattern recognition. The ideal candidate has experience with machine learning frameworks (PyTorch, TensorFlow), computer vision algorithms, and real-world deployment of AI models. This position requires strong problem-solving skills and collaboration with cross-functional teams to drive innovation and enhance product capabilities. The Responsibilities: • Research, develop, and integrate CV/AI solutions for perception problems such as object detection, instance segmentation, sensor fusion, pose estimation etc., • Translate product feature requirements to design specifications and devise high-level software architectures to meet requirements and guide design trade-off decisions., • Deploy real-time, optimized CV/AI solutions to embedded and edge platforms., • Own the full life cycle of new products/solutions from proof of concept to integration with other components and teams., • Collaborate with management and technical teams on product strategies, • Lead and/or participate in all phases of the product development cycle including:, • requirements definition and architecture, • software design and development, • implementing software, • software/hardware integration, • verification and validation, and customer support, • Develop & identify tools / methods for better design reuse & process improvement, • Lead design reviews and provide technical oversight, • Mentor junior engineers Additional Responsibilities: Other duties as assigned The Right Person Will Have (Required): • Master of Science or PhD in Computer Vision, Machine/Deep Learning, Computer Science, Computer/Electrical/Software Engineering, or a related field., • 5 years of industry experience, • Excellent problem solving & troubleshooting skills., • Proficiency in Python and C++, • Proficiency with OpenCV, • Proficiency with PyTorch, TensorFlow, or related machine learning framework(s), • Experience with fine-tuning and transfer learning AI models, • Ability to design end-to-end processing pipelines for custom use cases, • Self-Driven personality, • Capable of a big picture, system-oriented approach, • Solid technical leadership skills, • Strong communication and interpersonal skills The Right Person Will Have (Preferred): • Experience with autonomous/industrial robotic platforms and applications, • Experience with embedded and edge processing platforms (Nvidia Jetson devices and TensorRT in particular), • Experience with edge AI accelerators (integration, model conversions, deployment, profiling, etc.), • Knowledge of intrinsic and extrinsic calibration procedures for multi-modal sensor systems, • Experience with sensor fusion techniques (calibration, early, mid, late fusion, etc.), • Knowledge of camera optics and computational geometry, • Gstreamer experience, • Robot Operating System (ROS) experience, • Experience with version control systems such as GIT and DVC, • Experience with GPU programming frameworks such as OpenCL and CUDA The Benefits: • Competitive total compensation, • Medical and dental coverage, • Employer paid basic life, short-term disability, and identity theft coverage, • Voluntary vision, life, long-term disability, accident, critical illness coverage, • 401k retirement contribution, • Paid holidays, time-off, and sick time, • Tuition assistance and employer paid professional development, • Flexible work schedules, • Remote opportunities available, • Complimentary snacks and beverages, • Employer sponsored social events The Company: Since our founding in 1999, D3 Embedded has driven innovation in high-performance embedded systems development. We leverage our expertise in autonomous machines, sensors, imaging, optics, edge computing, algorithms, robotics, and electrification to provide cutting-edge engineering design and low-volume manufacturing services. Headquartered in Rochester NY, we serve a global network of customers and are proudly connected with many technology leaders and Fortune 500 companies. We are interested in bright, creative, and team-oriented individuals exhilarated by the opportunity to transform the world through frontier technologies. Candidates must be eligible to work in the United States. D3 Embedded does not sponsor visas. For more information about D3 Embedded, please visit www.d3embedded.com. D3 Embedded is committed to fostering a diverse work environment and proud to be an Equal Opportunity Employer. We consider and hire applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or membership in any other group protected by federal, state or local law. D3 Embedded participates in E-Verify, a federal program that confirms employment eligibility upon hire. Powered by JazzHR NPzqe7XhVM

Job Description A Trusted CRO Partner for the Future of Eye Care iuvo Clinical is a full-service ophthalmology-focused contract research organization (CRO) dedicated to improving patient’s quality of life with breakthrough eye care therapies. We combine decades of specialized experience with a high touch, high science approach, partnering with innovators to accelerate ophthalmic breakthroughs from concept to commercialization. Whether advancing a novel retinal therapy or supporting a complex ocular device trial, we provide the expertise, flexibility, and personal dedication to ensure clinical trial success. We offer a comprehensive benefits package and the opportunity to broaden your experience and grow your career! We currently have an exciting opportunity for a Data Manager to join our team! SUMMARY The Data Manager is an expert in clinical data management with demonstrated capability in building and maintaining clinical trial databases. The Data Manager effectively works with a variety of key stakeholders including clinicians, allied healthcare personnel, clients, vendors, and iuvo Clinical staff. ESSENTIAL DUTIES AND RESPONSIBILITIES • Interface with clinical Project Manager(s) and statistician(s) to establish project data management plans and requirements, and database implementation schedules as well as other key study documents., • Participate in the department project clinical data system design, utilization, and maintenance to maintain conformance with FDA guidelines for clinical data management., • Collaborate with biostatisticians in the creation of analysis datasets., • Perform database quality assurance audits as needed, • Provide recommendations for improvement of project or divisional efficiencies based on work experience and observations., • Participate in project review meetings as requested., • Review protocols for CRF design and creation and develop electronic CRFs for use in clinical data management system., • Complete study specific database build activities in EDC system by creating database design specifications and edit checks for database programming and complete UAT, • May complete database programming activities in EDC system or work with programmer to set up as per database design specifications, • May train clinical site personnel and project team in the use of study-specific EDC and IWR system(s); conducts timely training and maintains training documentation, • Develop the Data Management Plan (DMP) and associated attachments, initiates DMP review and update per the specified review cycle, • Conduct timely study team training on the DMP and applicable attachments; maintains study training logs for project team(s), • Maintain up-to-date study data documentation, • May support database build activities in CTMS as needed, • Work with external vendors on study for external data needs, setting up data transfer specifications and complete external data reconciliation as needed, • Complete coding or work with coding team on set up and coordination of coding activities, • Manually review data listings and manage ongoing query resolution. Analyze, and interpret data to identify trends, patterns, and insights., • Collaborate with teams to understand data requirements and provide data-driven recommendations., • Serve as main point of contact for data management activities on assigned project, and provide updates to study team and sponsor on project calls as needed, • Develop and provide data management metrics to project team as needed, • Complete data cleaning and other activities required for database lock., • Complete database lock activities as outlined in DMP, • Demonstrate knowledge of ICH/GCP guidelines as they relate to data management., • Demonstrate knowledge of FDA regulations related to data handling and processing., • Regularly provides or uploads data-related documents to the eTMF, • Ability to train junior data management team members QUALIFICATIONS & REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE • Bachelor’s Degree with a major/ focus in relevant discipline or equivalent - mathematics, statistics, computer science, life science or related discipline., • Minimum of three years’ relevant work experience in data management., • Strong working knowledge of GCPs and Federal Regulations., • Current GCP certification required (or willing to obtain). COMPUTER SKILLS • Proficiency in data preparation, analysis tools and programming languages., • Proficiency in one or more EDC systems., • Proficiency with database design and systems, database technology and logical data analysis., • Previous database programming experience preferred but not required., • Experience working with CTMS and other clinical trial systems is preferred, as well as web-based software systems., • Understanding of SAS, Microsoft SQL., • Proficiency with Microsoft Office (Word, Excel, Outlook, Teams) and other software/programs as applicable to position, • Knowledge of programming in SQL reporting using Microsoft SQL Reporting Services and Crystal Reports desirable. COMMUNICATION SKILLS This position requires a person who communicates effectively both verbally and in writing with clinicians, clients, vendors, and internal project team members through demonstration of: • Excellent presentation and interpersonal skills, including clear, succinct, and timely communication, • Sharing ideas in a constructive manner, • Listening to and objectively considering ideas and suggestions from others, • Keeping commitments, • Keeping others informed of work progress, timetables and issues, • Read and comprehend work instructions/SOPs and protocols and write clear, concise communications and documentation OTHER SKILLS and ABILITIES • Solid analytical and problem-solving skills; strong attention to detail and a commitment to data accuracy and integrity., • Strong organizational and business skills, with particular strength in follow-through., • Excellent interpersonal skills, including clear, succinct, and timely communication., • Ability to work independently with ability to build relationships and foster trust., • Leadership skills, and ability to work effectively within a team configuration., • Ability to work on multiple projects and manage competing priorities., • Familiarity with current data standards (e.g., XML/CDISC) and database administration. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit or stand at a desk, talk and hear. iuvo Clinical fosters a video-first environment; employees are expected to have their cameras on for all internal and external meetings, check-ins, and collaborative sessions. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. LOCATION Remote TRAVEL As required, estimated as <5%. DISCLAIMER This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. iuvo Clinical is an Equal Opportunity Employer

Job DescriptionDescription: Our Mission Our mission is to leverage the power of food to end hunger and build healthier communities. Our Vision We believe that the fight against hunger and the fight against poverty are one and the same. We envision a future in which food is recognized as a human right and every person is able to feed themselves and their families in dignity. Together, we work to create a more nourished, prosperous region. The Foodlink Way Act With Compassion Take Responsibility Be a Team Player Listen, Learn, Adapt Job Title: Manager of Talent, Learning and Experience Department: Human Resources Reports to: Sr. VP, Chief People & Culture Officer Status: Full time, salaried, exempt Job Level: People Leadership Roles (7) Updated: September 2026 SUMMARY Foodlink is seeking a dynamic, people-centered Manager of Talent, Learning and Experience to help create an exceptional workplace where employees feel welcomed, supported, connected, and equipped to do their best work. The primary focus of this role is to strengthen the employee’s experience through thoughtful onboarding, meaningful learning and development opportunities, employee engagement initiatives, and practical support that help employees succeed and grow. This position will ensure employees have access to the training, tools, resources, relationships, and guidance they need throughout their employment journey. Working closely with leaders and teams across the organization, the Manager of Talent, Learning and Experience will identify organizational learning needs, coordinate development opportunities, enhance employee engagement and retention, and help foster a culture of belonging, continuous improvement, and mission-centered service. Talent, Onboarding and Organizational Learning Talent Acquisition Support • Support recruitment efforts to attract diverse, mission-aligned candidates., • Partner with hiring managers to coordinate candidate sourcing, screening, interviewing, references, and selection processes., • Maintain accurate job descriptions and support recruitment-related communications and postings., • Represent Foodlink at job fairs, workforce development events, and community recruitment initiatives., • Support a seamless transition from candidate to employee through close coordination between recruitment and onboarding activities. Hiring, Onboarding and New Employee Experience • Lead the design, coordination, and continuous improvement of Foodlink's comprehensive hiring and onboarding program., • Ensure every new employee experiences a welcoming, organized, and mission-centered introduction to Foodlink., • Develop onboarding resources, tools, schedules, and learning pathways that support successful integration into the organization., • Coordinate new employee orientation and onboarding activities., • Serve as the primary point of contact for employees throughout the onboarding process., • Conduct and coordinate early check-ins to support engagement, development, and retention., • Train, support, and partner with managers to ensure onboarding is consistent, supportive, and equitable across departments., • Gather and analyze onboarding feedback to improve the employee experience and increase early retention., • Approach onboarding with a hospitality mindset so each employee feels valued, informed, supported, and connected from day one., • Maintain onboarding documentation, records, checklists, and compliance requirements. Learning and Development Organizational Learning, Growth and Support • Design, coordinate, and facilitate learning opportunities that support employee effectiveness, skill development, compliance, mission knowledge, and professional growth., • Develop and maintain an annual organizational learning calendar., • Coordinate onboarding curriculum, employee training programs, and organization-wide learning initiatives., • Create and maintain learning resources, tools, checklists, guides, and reference materials that support employee success., • Promote a culture of continuous learning, curiosity, growth, and improvement throughout the organization., • Research and recommend learning opportunities, resources, and training solutions that support employee growth and organizational needs., • Establish and maintain relationships with external training providers, educational partners, professional associations, and workforce development organizations., • Help employees identify and access professional development opportunities that align with their roles and career interests., • Evaluate training effectiveness using participation data, employee feedback, and other relevant indicators., • Support the development and management of the annual training and professional development budget., • Maintain accurate training records, certifications, and compliance documentation. Employee Engagement and Retention • Lead and support initiatives that enhance employee engagement, belonging, connection, and retention., • Coordinate stay interviews, exit interviews, onboarding feedback, and employee experience surveys., • Track employee feedback and engagement trends and recommend practical improvements., • Support employee recognition, appreciation, wellness, and culture-building programs., • Partner with managers to strengthen employee communication, support, and team effectiveness., • Support initiatives that reinforce Foodlink's mission, values, and employee connection., • Serve as a champion for positive, meaningful employee experiences across all stages of employment. General Human Resources Support • Support Human Resources projects, initiatives, and priorities as assigned., • Coordinate logistics for training sessions, workshops, employee learning opportunities, and HR meetings., • Respond to employee inquiries with professionalism, confidentiality, and a customer-service mindset., • Maintain employee records and documentation in accordance with organizational practices and legal requirements., • Assist with HR reporting, data tracking, and workforce analytics related to employee experience, onboarding, learning, and retention., • Perform other duties as assigned. Requirements: Education & Experience • Bachelor’s degree in human resources, Organizational Development, Business Administration, Education, Communications, or a related field; or equivalent combination of education and experience., • Minimum of 5-7 years of relevant experience in Human Resources, employee experience, onboarding, learning and development, employee engagement, organizational support, or a related field., • Experience designing, coordinating, or delivering employee training, onboarding, or professional development programs preferred., • Experience supporting recruitment, onboarding, employee engagement, and retention initiatives preferred. Knowledge, Skills & Abilities • Passion for creating outstanding employee experiences and supporting employee growth and success., • Understanding of adult learning principles, training coordination, employee engagement, and talent development practices., • Knowledge of HR best practices and employment law., • Excellent interpersonal, facilitation, presentation, and communication skills., • Ability to build trust and strong working relationships across all levels of the organization., • Strong organizational and project management skills with the ability to manage multiple priorities., • Ability to analyze information, identify trends, and recommend practical solutions., • Ability to handle sensitive and confidential information with professionalism and discretion., • Strong customer-service mindset and commitment to supporting employees., • Experience with Paylocity or similar HRIS and applicant tracking systems preferred., • Proficiency with Microsoft Office and the ability to learn HR systems and workplace technology tools. Success in This Role Within the first year, the Manager of Talent, Learning and Experience will help Foodlink: • Deliver a welcoming, consistent, and high-quality onboarding experience for every new employee., • Expand employee access to learning, training, and professional development opportunities., • Build practical systems, tools, and resources that support employee growth and workplace success., • Improve employee engagement and retention through meaningful employee experience initiatives., • Strengthen employee connection to Foodlink's mission, values, and culture and help foster a workplace where employees feel connected, supported, valued, and equipped to do their best work. We are actively seeking a diverse pool of candidates for this position and strongly encourage applications from candidates of color. SALARY AND BENEFITS This is a full-time position paid on a salary basis, ranging from $70,000-$75,000/annual (DOE). Foodlink covers 100% of individual health and dental insurance with the ability to acquire family coverage with pretax dollars. In addition to generous paid time off (PTO), we observe 14 paid holidays throughout the year. Opportunity to contribute to a 401k retirement savings plan upon hire. Eligible for generous employer match after 1 year of service. Certain positions, depending on their responsibilities and at the approval of Human Resources, are eligible for a personal cell phone usage stipend. This position is eligible for a Class I personal cell phone usage stipend, paid biweekly at a rate of $24. The value of the stipend is based on Foodlink budget and is subject to change at any time. This is not a reimbursement program. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand and talk and hear. The employee is frequently required to use hands to handle or feel items such as documents. The employee is frequently required to stand and walk for long periods of time. Specific vision abilities required by this job include close vision, color vision and ability to adjust focus. Able to lift bulk objects or objects weighing up to 50 pounds. Work Environment The work environment characteristics described here are representative of those a team member encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually quiet. Note: The above description is illustrative of tasks and responsibilities. It is not meant to be all- inclusive. Employees will follow other instructions and perform other related duties as required. Diversity, Equity, & Inclusion Foodlink is committed to fostering, cultivating, and preserving a culture of diversity, equity, and inclusion. At Foodlink we believe that anti-hunger work is only possible with a commitment to removing barriers caused by systems of oppression that perpetuate hunger and poverty. We recognize that systematic injustice and bias disproportionately impact some identities more than others. Foodlink is actively working to center equity- the fair treatment of all people- in everything that we do so that everyone in our region has access to nourishing food that reflects and values cultural differences. Foodlink is committed to listening and supporting solutions to hunger that are sourced from people and communities with lived/living experience of hunger and poverty, and to responding where inequities exist. Foodlink is committed to taking great care to cultivate internal culture and practices that support diversity and inclusion. We embrace and encourage our employees’ differences in age, color, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics that make our employees unique. We aim to foster an environment in which everyone feels a sense of belonging and understands their connection to the Foodlink mission. Foodlink employees have a responsibility to always treat others with dignity and respect. Employees are expected to always exhibit conduct that reflects our values and promotes equity and inclusion during work, and at work functions.

Job DescriptionChannel Account ManagerRemote, US About Nametag Nametag is building the future of secure digital identity. Our mission is to protect every human identity to restore trust in the AI era. We bring workforce-grade identity verification into the enterprise to verify the human behind accounts and critical actions. Today, global enterprises use Nametag across their workforce to prevent social engineering and deepfake impersonation attacks. The Role We are hiring a Channel Account Manager (CAM) who is responsible for building and scaling an indirect sales ecosystem across our partner base by building deep partner relationships, driving enablement, and executing joint business plans that accelerate pipeline velocity and revenue growth. This role is a core member of the go-to-market engine working closely with partner, marketing and sales leadership and teams to expand partner-sourced and partner-influenced ARR by increasing the depth, productivity, and strategic alignment of channel partner relationships. This role suits someone who thrives at the intersection of strategy and execution—equally comfortable managing partner pipelines as they are building scale strategies and leading business reviews. What You'll Own Partner Sales Strategy and Execution • Responsible for developing and executing tailored GTM strategies for each assigned partner, translating Nametag's value proposition into targeted opportunities aligned with each partner's revenue model, customer base, and internal decision-making processes., • Build and maintain executive-level relationships within partner organizations while serving as a central liaison across Nametag's field sales, presales, distributors and resellers, ensuring strong cross-functional alignment., • Drive structured engagement motions - including QBRs, joint account planning, partner sales briefings, workshops - that result in clear commitments and measurable outcomes, • Develop event strategy, prioritization, alignment, logistics, promotion, execution, and follow-up, working closely with marketing and sales. Pipeline Creation and Acceleration • Own a defined share of pipeline generation through partner-sourced and partner-influenced motions, with accountability for maintaining accurate deal registration, a weekly channel forecast, and clear visibility into pipeline health for sales and channel leadership. Data integrity is foundational, with disciplined CRM management and clean forecasting enabling effective decision-making across the organization., • Work closely with partners to gather timely deal updates and proactively identify opportunities where targeted support (technical enablement, competitive positioning, and co-sell resources) can improve win rates, expand deal size, and extend reach into new accounts. Recruitment and Partner Readiness • Responsible for building a high-performing partner ecosystem through deliberate recruitment aligned to broader business objectives and comprehensive onboarding to reduce time to first sale., • Ensure existing and new partners are fully equipped to sell effectively by delivering ongoing sales enablement and training, providing clear tools and messaging to articulate our value proposition, and partnering with Marketing to design and execute joint programs that drive measurable return. Internal Collaboration • Active contribution to internal systems that make channel execution repeatable: improve partner tracking processes, maintain a current view of competitive positioning and industry trends, and develop retention strategies for key accounts., • Collaborate with internal stakeholders, including channel leadership, sales (account executives, solution engineers, customer success) and marketing, to support strategic goals and ensure alignment with the company's vision.Competencies for success:, • Channel Ecosystem Fluency: brings first-hand, deal-level understanding of how the channel operates, including how partners prioritize vendors, build their benches, and elevate suppliers to preferred status., • Executive Communication: leads all external interactions (QBRs, executive briefings, and joint business reviews) with confidence, structure, and clear command of the data, consistently driving toward defined outcomes. Manage forecasts with partner teams ensuring health, accuracy and velocity., • Revenue and Outcomes Oriented: evaluates all partner activity through the lens of pipeline and revenue impact, prioritizing partners who actively sell over those with passive alignment. Every interaction is commercially oriented, advancing deals, opening new accounts, or building capabilities that translate directly into revenue., • Data Integrity and CRM Discipline: maintains accurate deal registration, pipeline forecasts, and CRM records as a baseline professional standard, ensuring visibility and decision-making integrity across the organization. Hold themselves and their partners accountable to the principle that if it is not documented in the system, it does not exist., • Continuous Improvement and Institutional Knowledge: enhances and scales the partner program by documenting and standardizing what works, including QBR frameworks, deal workflows, enablement assets, and partner playbooks.What We're Looking ForRequired, • 5+ years of relevant experience managing channel partnerships (VARs, SIs, MSPs), • BA/BS degree; or equivalent work experienceWhat We Value, • Intellectual horsepower. Quickly grasping complex technical and business concepts., • Kindness and integrity. Earning trust is central to how we build relationships with customers and colleagues., • Bias for action. We move quickly to deliver impact and protect our customers against fast-moving threats., • Ownership mindset. You care about uptime and stability the way a founder cares about the product.Culture & Perks At Nametag, we believe trust starts with how we treat each other. We're a remote-first team that values autonomy, inclusivity, and collaboration, with regular in-person time to stay connected and innovate together. • Remote-first: Work from anywhere in the US. Our team spans Seattle, San Francisco, Ann Arbor, Denver, New York City, and beyond., • Off-sites: We bring the team together once per quarter for in-person collaboration, often off-site in new places., • Flexible schedules: Work in your own time zone; we align key meetings across a shared window.We Offer, • Competitive salary, • Meaningful equity ownership, • Comprehensive health benefits (medical, dental, vision), • Flexible paid time off, • Quarterly team off-sites and travel support, • New computer hardware and equipment, • An inclusive environment where your voice has impact and your work drives change

Job DescriptionSENIOR EMBEDDED SOFTWARE ENGINEER Department: Product Design Services FLSA Status: Exempt Reports to: Operations Manager Pay Range: $93,000 - $125,000 annually Location: Rochester, NY The Role: D3 Embedded is seeking an experienced Senior Embedded Software Engineer to lead the design, development, and optimization of software for embedded systems. This role involves architecting and implementing firmware solutions, debugging complex system issues, and ensuring high performance and reliability. The ideal candidate has extensive experience with embedded C/C++, real-time operating systems (RTOS), Linux operating systems (Ubuntu, Yocto, etc), microcontroller architectures, System on Chip SoC architectures, and low-level hardware interactions. Strong problem-solving skills, leadership traits, and the ability to mentor junior engineers are essential. This position plays a critical role in driving innovation and advancing embedded technology in our products. The Responsibilities: • All phases of the product development cycle including:, • requirements definition and architecture, • software design and development, • Software implementation, • hardware bring-up, software/hardware integration, • verification and validation, and customer support, • Embedded processors running real-time operating systems or Embedded Linux on custom electronics., • Technical tasks including;, • assisting with board bring-up, • developing driver and application-level code, • system verification, • Conduct and oversee code reviews, unit testing, debugging, and software/hardware integration., • Technical direction and leadership in a non-supervisory capacity for complex engineering projects, • Support project planning efforts including task definition and work effort., • Develop and evaluate plans and criteria for various projects and activities you will do., • Embedded Linux platforms, • Open-source Linux and associated SDKs, • GCC/GNU toolchain, • Developing & identifying tools / methods for better design reuse & process improvement, • Design reviews and technical oversight, • Coaching & mentoring less experienced engineers Additional Responsibilities: Other duties as assigned The Right Person Will Have: • Bachelor of Science in Computer Science, Computer Engineering, Electrical Engineering discipline and/or equivalent years of experience, • Minimum 5 years of experience in Embedded Software role, • Excellent problem solving & troubleshooting skills., • Ability to read schematics and debug digital hardware using oscilloscope, logic analyzer, or similar tools for troubleshooting., • Experience writing embedded device drivers, • Experience debugging embedded platforms, • Knowledge of embedded software and firmware development, including C and C++., • Up to date experience with Embedded Linux platforms, configuration, board support package, kernel drivers, and device tree, • Experience using GIT version control system, • Experience developing with GCC/GNU toolchain, • Experience with embedded camera and video processing is desirable., • Self-Driven personality, • Capable of a big picture, system-oriented approach, • Solid technical leadership skills, • Strong communication and interpersonal skills. The Benefits: • Competitive total compensation, • Medical and dental coverage, • Employer paid basic life, short-term disability, and identity theft coverage, • Voluntary vision, life, long-term disability, accident, critical illness coverage, • 401k retirement contribution, • Paid holidays, time-off, and sick time, • Tuition assistance and employer paid professional development, • Flexible work schedules, • Remote opportunities available, • Complimentary snacks and beverages, • Employer sponsored social events The Company: Since our founding in 1999, D3 Embedded has driven innovation in high-performance embedded systems development. We leverage our expertise in autonomous machines, sensors, imaging, optics, edge computing, algorithms, robotics, and electrification to provide cutting-edge engineering design and low-volume manufacturing services. Headquartered in Rochester NY, we serve a global network of customers and are proudly connected with many technology leaders and Fortune 500 companies. We are interested in bright, creative, and team-oriented individuals exhilarated by the opportunity to transform the world through frontier technologies. Candidates must be eligible to work in the United States. D3 Embedded does not sponsor visas. For more information about D3 Embedded, please visit www.d3embedded.com. D3 Embedded is committed to fostering a diverse work environment and proud to be an Equal Opportunity Employer. We consider and hire applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or membership in any other group protected by federal, state or local law. D3 Embedded participates in E-Verify, a federal program that confirms employment eligibility upon hire. Powered by JazzHR 25T2NSJnxs

Job Description:\n\n Chief Advancement Officer (CAO)\n Louis S. Wolk Jewish Community Center of Greater Rochester\n Location\n Rochester, NY (on-site)\n Reports to\n Chief Executive Officer (CEO)\n Status\n Full-time, Exempt\n Compensation\n $110,000-$125,000 annual salary; comprehensive benefits packageA Message to Our Community\n The Louis S. Wolk JCC of Greater Rochester is more than an institution. It is a living, breathing reflection of what a community can be - diverse, vibrant, welcoming, and resilient. A place where a child takes their first steps, a teen finds their voice, an adult rekindles purpose, and Jewish & Israel life flourishes across generations.\n As we look ahead, we are filled with both urgency and optimism. The future of our JCC is not about survival - it is about becoming more vibrant, more inclusive of all abilities and identities, more Jewish, and more essential than ever before. We are not just preserving a legacy - we are becoming the tomorrow of JCCs.\n Over the past year, the JCC has made meaningful progress: strengthening philanthropic momentum, clarifying campaign priorities, deepening donor relationships, and building a stronger foundation for long-term sustainability. This next chapter is about building on that progress with disciplined, strategic, and relational advancement leadership.\n We remain profoundly grateful to the members, donors, volunteers, and partners who make this possible. Their commitment fuels impact across Early Childhood, Fitness/Wellness/Aquatics/Recreation (FWAR), Arts & Culture, Jewish Life, Camp Seneca Lake, Camp Sisol, and Active Agers (55+). To sustain and grow this impact, we are investing in executive-level advancement leadership that will steward today's donors, welcome new partners, strengthen our story, and build an enduring culture of philanthropy.Our Values\n Kehillah - CommunityAn intentional community that nurtures physical, emotional, and spiritual well-being; we foster belonging by building connections, shared responsibility, and common purpose.\n Hachnasat Orchim - Welcoming + BelongingWe center the needs of every guest and member, creating a true sense of home and belonging across our community center.\n Chesed - CompassionLoving-kindness in action; we show care that improves well-being and brings warmth and joy, acting to carry goodness into the world.\n Kavod - Honor + RespectWe treat people and traditions with dignity, embrace difference with a flexible mindset, and cultivate authentic connections so all can be their true selves.\n Shmirat HaGuf - Being Our Best SelvesWe honor the body as a gift, promote whole-person wellness, and continually improve while celebrating and motivating one another.\n Guided by these values, the JCC is poised for its next chapter of service and impact.The Opportunity\n The Chief Advancement Officer (CAO) is a key member of the Executive Team who will lead an integrated, agency-wide advancement strategy for the Louis S. Wolk JCC of Greater Rochester. The JCC operates with an annual budget of approximately $14M and a staff of 90+ full-time employees and 250+ part-time, seasonal, and contracted team members. The CAO will grow annual philanthropic revenue beyond its current approximately $2.5M baseline while helping advance comprehensive campaigns, capital, endowment, sponsorship, and institutional funding priorities.\n This role is not starting from zero. The JCC has made important progress in recent months through stronger donor engagement, clearer prospect understanding, active campaign work, and more disciplined development practices. The next CAO will build upon that foundation - moving from momentum to a more mature, integrated advancement platform that connects philanthropy, storytelling, sponsorships, grants, donor communications, and stewardship.\n The CAO's scope spans the JCC's full program portfolio - including Early Childhood, FWAR, Arts & Culture, Jewish Life, Camp Seneca Lake (CSL), Camp Sisol, and Active Agers (55+) - with thoughtful partnership to program directors and senior leaders. Two signature programs, the Ames Amzalak Rochester Jewish Film Festival and the Lane Dworkin Authors + Innovators Festival, will require close collaboration with their respective Directors to design donor strategies and sponsorship packages while honoring each program's leadership, brand, audience, and identity.\n As Chief Advancement Officer, this leader will partner closely with the CEO and Senior Leadership Team - including the Chief Operating Officer, Chief Creative Officer, Executive Director of Camp Seneca Lake, Chief Jewish Life & Engagement Officer, and General Manager of FWAR - to translate mission, impact, and institutional priorities into compelling opportunities for philanthropic investment.\n The CAO will be a visible ambassador to donors, prospects, foundations, corporations, civic partners, and the broader Rochester community. This is a hands-on, externally facing role for a relational fundraiser who can move comfortably between strategy and execution, read a room, build trust quickly, and help the JCC tell its story with clarity, warmth, and purpose.Key ResponsibilitiesEnterprise Advancement Leadership & Strategy\n • Develop and execute a multi-year advancement plan to grow unrestricted annual giving, major gifts, planned giving, grants, corporate partnerships, sponsorships, and event-based revenue in alignment with agency priorities.\n • Translate the JCC's strategic priorities into clear, fundable cases for support that connect donor interests to institutional impact and long-term sustainability.\n • Lead a data-informed advancement culture with clear KPIs and dashboards, including pipeline health, donor retention and upgrade rates, proposal activity, grant hit rate, corporate revenue, event ROI, and stewardship completion.\n • Partner closely with the Chief Creative Officer and Marketing/Communications team to align fundraising strategy with brand visibility, donor storytelling, community engagement, public relations opportunities, and consistent audience-centered messaging.\n • Maintain a clear advancement coordination rhythm with program, finance, operations, marketing/communications, and senior leadership to align calendars, priorities, cases for support, and donor strategy without creating donor fatigue.Campaign, Major Gifts & Prospect Strategy\n • Co-lead the comprehensive campaign and related future capital priorities with the CEO and Board leadership, including gift table refinement, case alignment, prospect strategy, solicitation planning, and volunteer engagement.\n • Build upon existing prospect knowledge, donor history, campaign work, and current relationship intelligence to prioritize the strongest near-term and long-term opportunities.\n • Manage a personal portfolio of high-capacity donors and prospects; conduct discovery, cultivation, solicitation, and stewardship using disciplined moves management.\n • Develop individualized strategies for major donors, family foundations, institutional funders, corporate partners, and prospective transformational gifts.\n • Design and manage recognition and naming opportunities; ensure fulfillment, gratitude, impact reporting, and enduring stewardship.Annual Giving, Membership Integration & Advancement Communications\n • Grow a high-performing annual giving program from the current approximately $2.5M baseline, with intentional strategies for leadership annual giving, mid-level donors, recurring monthly giving, lapsed-donor reactivation, and upgraded member philanthropy.\n • Align donor journeys with membership, program participation, and community engagement so members and participants see themselves as investors in the JCC's future.\n • Partner with the Director of the Ames Amzalak Rochester Jewish Film Festival and Lane Dworkin Authors + Innovators Festival to co-create sponsorship, underwriting, and major-gift strategies unique to each signature program.\n • Evolve events from transactional sponsorship opportunities into mission-rich experiences that drive retention, upgrades, stewardship, and pipeline growth.\n • Ensure appeals, donor communications, and impact reports are timely, segmented, emotionally compelling, and connected to the JCC's unified agency case.Institutional Giving, Grants, Foundations & Corporate Partnerships\n • Lead foundation strategy, including landscape analysis, proposal development, grant calendars, compliance, reporting, and relationship management.\n • Grow corporate revenue through sponsorships, program underwriting, cause marketing, and strategic partnerships with clear benefits packages for FWAR, Arts & Culture, Early Childhood, Family Programs, Camp Seneca Lake, and agency-wide initiatives.\n • Identify new philanthropic and institutional partners whose priorities align with Jewish life, youth and family engagement, wellness, arts and culture, older adults, inclusion, security, and community building.\n • Partner with Finance and program leaders to ensure proposals are realistic, budgets are accurate, grant obligations are understood, and outcomes are tracked.Systems, Data & Operations\n • Leverage Blackbaud Raiser's Edge NXT as the system of record for philanthropy and strengthen its use for segmentation, moves management, reporting, stewardship, and forecasting.\n • Integrate advancement strategy with DAXKO and other membership/program data to identify donor pathways, participation patterns, and cultivation opportunities.\n • Strengthen policies and infrastructure, including gift acceptance, pledge management, acknowledgments, donor recognition, campaign tracking, data hygiene, and audit readiness.\n • Partner with Finance on forecasting, reconciliation, pledge payment tracking, revenue recognition, and ethical and compliant fundraising practices.\n • Establish reliable routines for portfolio review, pipeline management, proposal tracking, donor communications, and monthly advancement reporting.Board, Volunteers & Team Leadership\n • Serve as lead staff partner to the Board's Philanthropy/Advancement Committee (and Sub-Committees), preparing materials, strategy updates, dashboards, and discussion items that support informed governance and volunteer engagement.\n • Recruit, coach, and support volunteer ambassadors, campaign leaders, and lay partners so they are equipped with clear cases for support, talking points, and appropriate next steps.\n • Develop and lead a nimble advancement team structure across major gifts, annual giving, grants, corporate partnerships, events, stewardship/donor relations, and advancement operations, aligned with budget and institutional priorities.\n • Clarify roles, workflows, cadences, and decision rights across the advancement function and among staff who support fundraising, events, communications, finance, and program-based donor engagement.\n • Train staff, lay leaders, and program directors in donor-centric best practices, confidentiality, prospect coordination, and mission-based storytelling.Cross-Agency Coordination & Best Practices\n • Camp Seneca Lake (CSL): Work closely with the Executive Director of Camp Seneca Lake and CSL’s development team to coordinate best practices and donor journeys for a flagship program with a largely out-of-market alumni and donor base, and a multi-million-dollar, Board-approved capital campaign that represents one of the JCC’s most significant long-term advancement opportunities.\n • Collaborate across departments - including Early Childhood, FWAR, Arts & Culture, Jewish Life, Camp Seneca Lake, Camp Sisol, and Active Agers (55+) - to prioritize opportunities, prevent overlap, and connect program needs to the unified agency case.\n • Create a clear intake and vetting process for fundraising initiatives across departments, including program pilots, events, sponsorships, grants, and capital needs.\n • Maintain a master advancement calendar, institutional priority list, prospect assignment protocol, and stewardship schedule.\n • Ensure every appeal, proposal, visit, and event connects back to mission, impact, Jewish values, and the JCC's broader future.First 30/60/90 Days: Success MilestonesFirst 30 Days - Transition, Listening & Continuity\n • Complete a structured transition review of current donor portfolios, prospect notes, campaign materials, active solicitations, pending proposals, grant deadlines, sponsorship commitments, stewardship obligations, naming opportunities, and Raiser's Edge NXT data.\n • Meet with the CEO, Executive Team, program directors, Board/Philanthropy leadership, key volunteers, advancement staff/support partners, and a select group of top donors and prospects.\n • Identify immediate stewardship needs, open proposals, pending asks, and time-sensitive donor follow-up to ensure continuity during the leadership transition.\n • Assess the current 12-month fundraising calendar, donor communications, campaign materials, signature event sponsorship packages, and advancement reporting practices.\n • Establish the CAO's personal portfolio and confirm the first wave of CEO/CAO donor visits, stewardship conversations, and near-term solicitation opportunities.By Day 60 - Strategy, Prioritization & Activation\n • Present a refreshed 12-month Advancement Operating Plan that builds upon the JCC's recent development progress and includes revenue targets, major gift priorities, annual giving strategy, grants, sponsorships, endowment/planned giving, stewardship, and communications alignment.\n • Validate and prioritize the top 75 prospects and donors, with individualized strategies for the highest-value near-term opportunities and a clear portfolio management structure.\n • Refine the unified Case for Support and campaign priorities, incorporating programmatic, capital, endowment, and agency-wide needs into a coherent donor-facing narrative.\n • Publish a stewardship and solicitation calendar that coordinates appeals, campaign moves, grant deadlines, corporate sponsorship opportunities, and signature event touchpoints.\n • Outline the next-stage team/workflow plan for advancement, including roles, dotted-line supports, meeting cadences, prospect assignment protocols, and reporting expectations.By Day 90 - Execution, Pipeline Movement & Reporting\n • Conduct CEO/CAO and volunteer-supported donor visits, advancing at least 20 meaningful moves across cultivation, stewardship, renewal, upgrade, proposal, and solicitation activity.\n • Move priority campaign and major gift prospects to clear next steps, including written strategies, assigned relationship owners, target ask amounts or ranges, and expected timing.\n • Launch or refresh segmented annual giving and donor communications using Raiser's Edge NXT reporting and clear audience-specific messaging.\n • Refresh sponsorship and underwriting packages for key events and programs, including the Film Festival, Authors + Innovators Festival, FWAR, Early Childhood, Family Programs, and Camp Seneca Lake.\n • Roll out a monthly advancement dashboard and pipeline review

Job DescriptionDescription: Project Architect | Commercial Design Full Time | Architecture | Commercial Projects Elizabeth Banzhaf, LPN Co-Founder & COO | Heartline Staffing Call or Text: 272-230-3157 LinkedIn: View Elizabeth's LinkedIn Prefer a confidential conversation instead of applying? Call or text Elizabeth directly at 272-230-3157. Heartline Staffing, in partnership with Purple Cow Recruiting, is hiring a Project Architect for Popli Design Group in Rochester, New York. POSITION OVERVIEW Popli Design Group is seeking an experienced, licensed Project Architect to lead the architectural design, documentation, and technical coordination of commercial and multidisciplinary projects. This is a hands-on design position for an architect who wants to remain actively involved in project development rather than working exclusively in project management. The Project Architect will oversee architectural work from design development through permitting, construction administration, and project closeout. This individual will coordinate with internal engineering disciplines, external consultants, clients, contractors, and governing agencies while ensuring that project documents meet applicable building codes, client expectations, and Popli Design Group standards. The successful candidate will provide technical leadership, maintain project momentum when the Project Manager is unavailable, supervise junior architectural staff on a project basis, and balance design responsibilities with team coordination and client communication. Key responsibilities include: • Lead the architectural design and production of commercial and multidisciplinary projects, • Remain actively involved in hands-on design, technical documentation, and drawing production, • Coordinate architectural work with internal engineering teams, external consultants, clients, contractors, and governing agencies, • Prepare and oversee complete project documentation for client approvals and state or local permits, • Ensure drawings and specifications meet applicable building codes, project requirements, and company standards, • Organize project workloads and develop redlines for junior architectural staff to implement, • Review staff work and provide regular feedback, mentorship, and technical guidance, • Coordinate closely with Project Managers regarding staffing needs, project priorities, design progress, and deadlines, • Maintain project momentum and make appropriate technical decisions when the Project Manager is unavailable, • Perform construction site visits and project walkthroughs, • Review RFIs, shop drawings, submittals, and contractor questions during construction, • Issue supplementary instructions and help resolve design or construction conflicts, • Confirm that contractor work aligns with contract documents and project specifications, • Review project closeout documentation and support final project completion, • Select and apply appropriate architectural procedures, technical methods, and design solutions, • Prepare clear meeting minutes, reports, correspondence, and project documentation, • Assist with value-engineering efforts while protecting design quality, functionality, and code compliance COMPENSATION • $80,000-$120,000 Annual Salary, • Final compensation will be based on experience, licensure, technical expertise, and overall qualifications SCHEDULE • Full-Time Position, • On-Site at the Rochester, New York Office, • No Remote Work, • Local travel to project sites is required WHY ARCHITECTURE PROFESSIONALS ARE APPLYING • Join Popli Design Group, a multidisciplinary architecture and engineering firm serving clients since 1982, • Work within an established organization with seven offices across New York State, • Remain actively involved in architectural design and documentation rather than moving into a fully administrative project-management role, • Lead commercial and multidisciplinary projects from design development through construction completion, • Collaborate directly with architects, engineers, consultants, clients, contractors, and governing agencies, • Mentor junior architectural professionals and influence the technical development of project teams, • Apply advanced architectural judgment while maintaining meaningful involvement in daily project design, • Participate in construction administration, site visits, code compliance, permitting, and project closeout, • Build a long-term career with an established firm known for quality, professionalism, and integrity BENEFITS • Full-Time Direct-Hire Employment, • Long-Term Professional Growth Opportunity, • Project Leadership and Mentorship Responsibilities, • Exposure to Commercial and Multidisciplinary Projects, • Benefits package details will be confirmed during the interview process Requirements: • Professional Architect License REQUIRED, • New York State Architect License Preferred; Candidates Must Be Able to Obtain New York Reciprocity Within 6 Months REQUIRED, • Minimum 6 Years of Hands-On Architectural Design and Documentation Experience REQUIRED, • Predominantly Hands-On Design Experience Rather Than Exclusively Project Management Experience REQUIRED, • Commercial, Institutional, Civic, Industrial, or Other Non-Residential Project Experience REQUIRED, • Residential-Only Architecture Experience Does Not Meet the Position Requirements, • Five-Year NAAB-Accredited Architecture Degree or an Equivalent Combination of Education and Relevant Professional Experience REQUIRED, • Experience Leading the Development and Production of Architectural Documents REQUIRED, • Experience Coordinating Multidisciplinary Projects with Engineers, Consultants, Clients, Contractors, and Governing Agencies REQUIRED, • Strong Knowledge of Building Codes, Permit Documentation, Construction Documents, and Technical Standards REQUIRED, • Ability to Lead Projects and Maintain Progress When the Project Manager Is Unavailable REQUIRED, • Experience Developing Redlines, Reviewing Staff Work, and Mentoring Junior Architectural Staff REQUIRED, • Proficiency in AutoCAD REQUIRED, • Proficiency in Revit REQUIRED, • Proficiency in Bluebeam REQUIRED, • Proficiency in Microsoft Office Suite REQUIRED, • Proficiency in New York State Energy Software REQUIRED, • Strong Written, Verbal, Technical, and Client-Facing Communication Skills REQUIRED, • Ability to Read and Interpret Complex Technical Documents, Drawings, Codes, and Specifications REQUIRED, • Ability to Prepare Professional Reports, Meeting Minutes, Emails, Memos, and Project Correspondence REQUIRED, • Valid Driver's License and Acceptable Motor Vehicle Record REQUIRED, • Ability to Travel to Construction Sites and Attend Project Walkthroughs REQUIRED, • Ability to Work Full Time On-Site in the Rochester, New York Office REQUIRED, • Remote Work Is Not Available for This Position, • United States Citizenship or Permanent Resident Status REQUIRED, • Advanced Construction Administration Experience Preferred, • Experience Reviewing RFIs, Shop Drawings, Submittals, and Closeout Documentation Preferred, • Experience Organizing Workload Assignments and Supporting Value-Engineering Efforts Preferred Not ready to formally apply? That's okay. Many architecture professionals prefer a confidential conversation first. Call or text Elizabeth Banzhaf directly at 272-230-3157 to discuss the position privately. Heartline Staffing is a Strategic Talent Partner with Purple Cow Recruiting. Applications are securely tracked and reviewed through our applicant-tracking system. Qualified candidates will be contacted directly regarding next steps.

Job DescriptionDescription: Infrastructure + Mobility Group Manager - PA - Harrisburg / Central PA Transportation Engineering, Project Management, People Leadership, Lead Pennsylvania Infrastructure + Mobility work aligned to the Central Pennsylvania transportation market, supporting PennDOT-adjacent programs, PTC and municipal clients, roadway, highway and bridge design, project delivery, client relationships, and team leadership while remaining connected to Fisher’s Canonsburg PA operations. Lead project delivery, mentor Project Managers, manage select transportation projects, strengthen client relationships, and help Fisher grow a high-performing Infrastructure + Mobility group focused on quality, accountability, financial performance, and community-shaping transportation outcomes. What You’ll Do • Lead and grow a collaborative, high-performing Infrastructure + Mobility team aligned with Fisher values, design excellence, client service, and strong project delivery outcomes., • Provide hands-on leadership for Project Managers, supporting workload balance, professional development, accountability, engagement, and clear performance expectations., • Oversee transportation planning and design projects, ensuring project financials, staffing, schedules, scope, quality, priorities, and client expectations are actively managed., • Serve as a trusted client contact for public and private sector clients while supporting proposals, interviews, business planning, municipal approvals, and new work development., • Represent Fisher in professional organizations and community activities while strengthening market visibility, team morale, sustainable growth, and long-term client relationships.Requirements: What We’re Looking For • B.S. degree in Civil Engineering or related field required; Professional Engineering License (PE) required., • 15+ years of transportation, roadway, or highway engineering experience, including at least 5 years of project management experience., • Strong financial acumen with the ability to use dashboards, metrics, budgets, schedules, staffing plans, and data to drive accountability and results., • Familiarity with PennDOT or PTC design standards required; proficiency in MS Office required; MicroStation experience preferred., • Leadership, communication, client relationship, business development, collaboration, integrity, respect, active listening, sound judgment, adaptability, ownership, and continuous-improvement mindset. Preferred Qualifications • Experience managing Project Managers, multidisciplinary transportation teams, and complex public-sector infrastructure programs across multiple locations or markets., • Ability to balance project delivery, people leadership, client service, financial performance, proposal strategy, and operational priorities in a growth-focused environment., • Comfort coaching staff, setting expectations, supporting career development, and building a team culture grounded in accountability, trust, mentorship, and engagement., • Strong organizational, planning, communication, and problem-solving skills with the ability to navigate public processes, municipal approvals, and stakeholder expectations. Why Join Fisher • Step into a visible Pennsylvania leadership role where your transportation expertise, client relationships, and people leadership directly shape team success and project outcomes., • Work on meaningful roadway, highway, transportation planning, municipal infrastructure, PennDOT, PTC, and community-shaping projects while growing Fisher’s Pennsylvania presence., • Join a collaborative, flexible culture built on accessible leadership, mentorship, ownership, professional development, continuous learning, work-life balance, and employee voice. Compensation + Benefits • Salary range: $150,000-$191,000; actual compensation varies based on experience, qualifications, education, location, and other factors and excludes the value of benefits., • Competitive benefits include medical, dental, vision, 401(k), company-paid life and disability insurance, PTO, paid holidays, and supplemental benefits., • Hybrid work schedule, professional development reimbursement, shareholders program, tuition assistance, strong work-life balance, and employee groups focused on community, inclusion, and employee voice. Location Flexibility This role may be aligned to Harrisburg / Central Pennsylvania for talent-market reach, with Canonsburg as the preferred Fisher office anchor. Fisher will also consider strong candidates near Canonsburg, Pittsburgh, Eastern Pennsylvania, or other established Fisher office locations, based on client needs and team alignment. Fisher Associates is committed to fostering a diverse and inclusive workplace and does not discriminate on the basis of any protected status under federal, state, or local law. #LI-Remote #LI-DNP

Job DescriptionDescription: Proposal Manager - Rochester, NY Rochester, NY is home to Fisher Associates’ headquarters and a broad multidisciplinary AEC practice, making it a strong environment for a senior pursuit professional who understands how technical expertise, client relationships, and compelling proposal strategy come together. In this role, you’ll help Fisher position its transportation, landscape architecture, energy, civil/site, environmental, planning, design, and other professional services for complex pursuits. You’ll work directly with Practice Directors, Client Managers, technical teams, marketing professionals, and leadership to guide opportunities from early capture through proposal submission and interview preparation. If you’re ready to take ownership of high-value pursuits and have a visible influence on how an established AEC firm competes for work, this role gives you the opportunity to combine strategy, storytelling, visual communication, and execution. What You'll Do • Lead the full proposal lifecycle from opportunity evaluation through submission and interview preparation., • Facilitate pursuit strategy discussions, kickoff meetings, go/no-go conversations, and proposal planning., • Develop win themes, proposal narratives, executive summaries, value propositions, differentiators, proof points, and client-focused messaging., • Manage proposal schedules, assignments, quality control, compliance, and final submissions., • Write, edit, and refine proposal content, resumes, project descriptions, and supporting materials., • Coordinate cross-functional teams and drive accountability throughout complex pursuits., • Support interview preparation, presentation development, coaching, pursuit process improvement, and implementation of AI-enabled proposal technologies and analytics.Requirements: What We're Looking For • Bachelor’s degree in Marketing, Communications, Business, Journalism, or related field., • Minimum of 10 years of experience with proposal management, pursuit management, or strategic marketing experience within the AEC industry., • Proven experience leading complex, high-value pursuits and influencing senior technical teams., • Strong understanding of capture strategy, win themes, and client-focused proposal development., • Exceptional writing, editing, communication, and project management skills., • Ability to manage multiple concurrent deadlines in fast-paced environments., • Advanced proficiency in Adobe Creative Suite, including InDesign, Illustrator, and Photoshop., • Advanced proficiency in Microsoft Office., • Experience developing highly polished, visually compelling proposal and interview materials., • Strong understanding of layout, typography, visual hierarchy, and branded communication., • Ability to guide visual storytelling and collaborate on graphics, infographics, and presentation design., • Ability to influence teams and drive accountability without direct authority., • Strong strategic thinking, executive presence, and communication skills., • Ability to balance strategy, creativity, storytelling, and hands-on execution., • High standards for content, compliance, visual communication, and the overall evaluator experience. Preferred Qualifications • Familiarity with CRM systems, proposal tools, and AI-assisted proposal platforms. Why Join Fisher • Shape meaningful infrastructure, environmental, and community outcomes through work that has visible local and regional impact., • Grow in a collaborative culture where accessible leaders welcome ideas, feedback, ownership, and professional development., • Build your career through mentorship, technical learning, leadership opportunities, and exposure to multidisciplinary project teams., • Thrive in a flexible, team-driven environment that values quality, accountability, work-life balance, and long-term success. Compensation + Benefits • Medical, dental, and vision insurance., • 401(k) plan., • Company-paid life and disability insurance., • Hybrid work schedule, generous PTO, paid holidays, and strong work-life balance., • Shareholders program, professional development opportunities and reimbursement, supplemental benefits, and employee groups focused on community, inclusion, and employee voice. Location Flexibility This role is aligned to the Rochester, NY market for firmwide AEC pursuit leadership, multidisciplinary proposal strategy, and client-focused business development support. Fisher may also consider strong candidates located near Buffalo, NY; Syracuse, NY; Binghamton, NY; Ithaca, NY; Albany, NY; Canonsburg, PA; or Sugar Land, TX; based on project needs, client alignment, team growth priorities, and business development opportunity. This position is open to remote candidates; however, remote work arrangements are evaluated on a case-by-case basis and are dependent on the candidate’s experience level, demonstrated qualifications, and ability to perform the essential functions of the role independently. Equal Employment Opportunity Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid #LI-DNP

Job DescriptionDescription: Position Summary The Human Resources Business Partner (HRBP) serves as a trusted strategic advisor and operational consultant to leaders across designated university client groups. In this role, the HRBP partners closely with leadership to weave Roberts Wesleyan University’s Christian faith-based culture into the daily employee experience, fostering a workplace where faculty and staff are empowered to pursue faithful, free, and full lives, where we learn to live, and where we equip our students to do the same. In addition to driving core HR operations for client units, the HRBP is accountable for one or more university-wide HR programs (e.g., Compensation & Classification, Talent Acquisition, Employee Engagement, or Talent Development), ensuring these institutional workflows reflect Roberts' mission, operational standards, and commitment to excellence. Key Responsibilities Strategic Consultation & Faith-Integrated Workplace Culture • Mission Integration: Collaborate with client group leaders to integrate Roberts’ Christian faith-based identity and values into performance conversations, leadership development, workplace practices, and team culture• Leadership & Managerial Coaching: Advise vice presidents, deans, chairs, and supervisors on effective talent strategies, organizational structures, change management, and team dynamics, encouraging a culture of grace, accountability, and professional growth., • Employee Experience & Student Impact: Help design workplace environments where staff and faculty thrive holistically, modeling life-long learning and purposeful living so employees can effectively mentor and guide students to do the same., • Employee Relations & Conflict Resolution: Serve as a compassionate, objective consultant for employee concerns and workplace conflicts, applying biblically grounded principles of reconciliation alongside university policy and employment law. HR Program Management • Functional Program Ownership: Serve as the enterprise owner and subject matter expert for assigned HR discipline(s) (such as Compensation, Talent Acquisition, Talent Development, or Employee Relations)., • Program Design & Execution: Develop, implement, and continuously improve institution-wide policies, frameworks, and operational workflows within the designated functional area(s). Program assignments to be designated upon hire based on university needs and candidate background., • Cross-Campus Training & Delivery: Design and facilitate workshops, manager toolkits, and compliance training that align both with industry best practices and the university’s faith-integrated culture. General Operations & Compliance • Workforce Planning & Organizational Design: Partner with academic and administrative units on organizational design, position creation, job description development, and staffing models and analyses., • Employee Lifecycle Management: Guide managers through onboarding frameworks, annual performance evaluations & improvement plans, retention strategies, and learning & development initiatives., • Regulatory Compliance: Ensure client actions and HR programs comply with federal/state employment laws (FMLA, ADA, FLSA, Title VII) and university policies.Requirements: Minimum Qualifications • Education: Bachelor’s degree in Human Resources, Business Administration, Organizational Leadership, or a related field. Master’s degree preferred., • Experience: Minimum of 3-5 years of progressive HR experience as an HR Business Partner, HR Generalist, or functional specialist, preferably in higher education., • Demonstrated track record of managing or administering an enterprise HR program (e.g., compensation structures, talent acquisition, or learning programs)., • Knowledge: Sound understanding of federal and state employment law and HR operational practices., • Demonstrated commitment to Christian higher education and the mission of Roberts Wesleyan University., • Experience collaborating cross-functionally across complex organizational units., • Strong organizational leadership and change management experience. Core Competencies • Relational Leadership: High emotional intelligence, active listening, and the ability to build trust with diverse academic and operational leaders., • Cultural Alignment: Ability to articulate and operationalize a faith-integrated view of work, community, and personal growth., • Strategic & Tactical Balance: Ability to address immediate employee relations needs while simultaneously managing long-term institutional programs.

Job Description Lead PCB Designer Rochester, NY – Relocation Assistance Provided The Company Our client is one of the largest, successful aerospace, defense and technology innovators in the world. They operate in over 100 countries and provide strategic solutions to the US, in order to protect and defend our freedoms worldwide, with advancing space access, supporting national security, civil service, and transportation safety. Their employees are passionate about their customers and their mission, as they enjoy working with cutting edge technologies and advancements that are positively impacting our society. The Job Our client is seeking a Lead PCB Designer. This person will contribute to the company's success by supporting PCB layout design activities to support the development of the most advanced radio communication equipment in the world for the military and first responders. The PCB Designer will effectively utilize design software deployed at the company to create, modify, review, and validate PCB designs for rigid, flexible, and rigid flex printed circuit boards. They will utilize the latest board technologies: fine line and spaces, microvias, stacked microvias, via-in-pad, etc. The person will mentor new and less experienced designers in all elements of PCB design. This role reports to the PCB Design Manager. Functions • Utilize Mentor PADS layout software to incorporate schematic, mechanical, and manufacturing inputs into new and revised HDI PCB designs., • Collaborate with the cross-functional design team to resolve fabrication, assembly, and test issues identified through Valor NPI fabrication and manufacturing checks, • Create PCB stackups and model-controlled impedance., • Create highly complex PCB layouts leveraging design methodologies by board technology, e.g., RF, digital, analog, power supply and mixed technologies., • Perform peer reviews of complex PCB layout designs., • Create and maintain PCB layout design guidelines., • Lead the assessment and implementation of new and upgraded PCB design software., • Develop and document best practices related the PCB design process. Create and update templates, checklists, and procedures., • Mentor less experienced PCB Designers., • Respond to supplier support requests when technical questions arise related to the requirements associated with specific PCB part numbers. Qualifications • Bachelor's Degree and a minimum of 9 years or prior relevant PCB design experience. Graduate Degree and a minimum of 7 years of prior related PCB design experience. In lieu of a degree, minimum of 13 years of prior related PCB design experience. Preferred Skills • Knowledge of the PCB design value chain: schematics, materials, fabrication, assembly, and related design and simulation software tools., • Knowledge of the PCB design elements: schematic, BOM, mechanical, fabrication, assembly, components, and all related files and documentation, • Experience mentoring and onboarding less experienced and early career PCB Designers, • Experience with peer reviews of PCB layout designs., • Experience evaluating and upgrading PCB design related software. Security Clearance Please be aware this position requires eligibility to obtain a DoD security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

Job Description We are currently seeking qualified Engineering Project Managers to oversee all phases of production projects. Candidate will be responsible for client and project development, client interaction, and client meetings. The individual will represent the firm in meetings and conferences with clients, regulatory agencies, and officials of other organizations. Candidate must have experience and background with civil engineering disciplines and especially water and wastewater conveyance and treatment or utility/infrastructure design. Project Manager will develop projects with clients and then will be involved in the oversight and management of the design and construction of those projects while maintaining client contact.

Job Description We are currently seeking an Architectural Project Manager with a minimum of 10 years of experience in our Rochester, NY location. Project Management experience in complex project types, and familiarity with Wicks-Law is preferred. Experience in municipal, judicial, or jail design is a plus. This leadership position requires a personable candidate with extensive experience in client service, business metrics, and successful outcomes. Prior experience working for an Architectural/Engineering Consultant or Municipal firm is required. The candidate should have strong interpersonal and leadership skills along with the ability to work with and lead large interdisciplinary teams, track and delegate responsibilities and deadlines. Client and consultant coordination, budgeting and scheduling is required. Duties: • Initiating and managing projects from inception to completion, • Leading Staff and Consultant Teams, • Coordination of all disciplines, • QA/QC of work, • Key Client Contact and Sales Responsibilities Requirements • Excellent communication, organization, work planning, team facilitation and financial management skills, • Registered Architect in the State of New York (other states desirable, but not required), • Working knowledge of Revit, AutoCAD, and Autodesk Construction Cloud (ACC), • Judicial and Detention Design experience a plus, • Minimum of 10 years of experience, • Strong knowledge of Office of Court Administration (OCA), New York State Commission of Correction (COC), New York State Office of Children and Family Services (NYSOCFS), NYS Building Codes, NFPA, and ICC codes a plus, • Fluent in Microsoft Word, Excel, and Outlook. MS Project experience is a plus Salary Range: • 10 - 15 years of experience: $90,000 - $105,000 per year, • 15 - 20 years of experience: $105,000 - $125,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 60 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Mechanical Engineer Your Role: As a Mechanical Engineer, you will support the NPI (New Product Introduction) division in the design and development of cutting-edge technology, new products, processes, and automation for OEMs and startups. This role provides expertise to solve, design, process, and manufacturing challenges using various tools of the trade, including CAD, FEA, and other hands-on activities. Reports To: Engineering Manager Essential Functions: • Using CAD and other tools, ability to generate designs and manufacturing drawings adhering to customer specifications within defined cost, quality and delivery parameters., • Provide concepts and drawings in analog and digital formats., • Provide engineering analysis to support manufacturing, design and process development, • Apply knowledge in mechanical power transmission, fluid power, mechanical components, fabrication and basic automation for design and development., • Work with and support cross-disciplinary teams to solve product design, manufacturing and process problems., • Ability to respond quickly and professionally adhering to delivery requirements., • Participate in customer meetings and travel (<5days/year) as required., • Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment., • Hands on: assembly / testing support to support prototyping and process development Basic Qualifications: • CAD for 3D design and detailing; Solidworks, Inventor and/or CREO skills required., • Experienced in technical communication internally and externally; email, technical write-up, presentation, meetings., • MS Office: Word, Excel and PowerPoint., • Engineering Design: CAD, FEA, FMEA techniques, Analysis (stress, displacement, thermal), DFMA, tolerance analysis and GDT., • Experienced in developing and communicating project progress., • Experience with various manufacturing processes, i.e. machining (CNC, Mill, Lathe), sheet metal, welding, and materials., • Minimum education: BSME – 4 YEAR Mechanical Engineering / Engineering Technology Degree, • 3-5 years Engineering Design or problem solving with commercial or industrial equipment/processes., • 1-2 years minimum CAD design experience in SolidWorks or CREO., • Experience with various manufacturing processes i.e, machining, sheet metal manufacture, plastics processing, costing & finishing in general. Preferred Experience: • Knowledge of industrial control systems and software a plus Work Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Recognition Awards & Discretionary Benefits Our Core Values: Agility We are committed to maintaining a financially prudent and adaptable organization, ready to meet evolving challenges with confidence. Compassion We care deeply for our talented and loyal PEKO family, fostering a supportive and inclusive workplace culture. Endurance We believe in the resilience of our people—problem solvers who shape the future through perseverance and innovation. Integrity We uphold transparency, honesty, and respect in all interactions with employees, customers, and stakeholders. Safety We prioritize a safe, clean, and positive work environment where every team member can thrive. Other: • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $75,000-$85,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR Gm7sriQesf

Job Description At McFarland Johnson (MJ), you?ll own your future. We're a 100% employee-owned firm with 80 years of experience delivering innovative engineering, planning, environmental, technology and construction solutions that make a lasting impact on the clients and communities we serve. Certified as a Great Place to Work, our employee-owners describe MJ's culture as collaborative, people-focused, and supportive. Join us, and help shape the future of infrastructure, together. This Senior Project Engineer is a junior leadership role critical to driving our initiatives that align with the company?s growth objectives and environmental commitments while leveraging innovative technologies and sustainable practices. The Project Engineer will collaborate with the Regional Engineering Manager and Project Managers implementing project work plans, designing site, utility, grading, and erosion control plans and details. This position will also contribute to strategic planning, team recruitment, productivity, quality control and assurance, business development, client satisfaction, staff career development. This is a unique opportunity to shape and grow our civil engineering division, delivering high-quality, safe, and efficient projects that support sustainable solutions. Key Responsibilities • Function as the primary point of contact for select clients, presenting technical solutions, maintaining client relationships, and driving new business development from existing clients., • Lead the design team and approval process to secure all regulatory approvals and permits, • Participate in the financial success of all projects., • Adhere to the Firm?s Quality Assurance and Quality Control policy and procedures on all projects., • Mentor and develop junior staff., • Attend weekly work-load staff meeting to share work and ensure staff meets utilization goals., • Continuously enhance the site civil practice by staying informed on industry trends, advancements, and best practices, while actively participating in industry networking events and organizations. Qualifications • Bachelor?s degree in civil engineering or related field., • Minimum 10 years? experience in the consulting industry working on projects for Economic Developers, Government/Municipal Agencies, Regional & National Retailers and Private Developers on Civil infrastructure and Site Plan projects. Extensive experience with civil/site design, permitting and management of private commercial developments, public County, City & Town roadways, water and sewer improvements projects., • Professional Engineer License, • Excellent written and verbal communication and Teamwork skills, • Public Presentation experience, • Experience with obtaining Entitlements including Federal, State and Local regulatory approvals and permits, • Expertise in State and Local site design standards and regulations, • Thrives working in a fast paced Team environment, • Excellent track record of financial success delivering projects on time and under budget, • Experience with writing proposals, • Proficient in Civil 3D, HydroCAD, Revit, WaterCadd, excel and Microsoft word, • Entrepreneurial attributes Why Join Us? • Career Growth: Accelerate your professional career with opportunities to lead, learn, and expand your expertise., • Collaborative Culture: Work alongside multidisciplinary teams that thrive on creativity, support, and teamwork. Collaborative is the most frequent word used to describe MJ?s culture in annual employee survey., • Employee Ownership: As a 100% ESOP, your contributions directly shape our shared success ? you own your future., • Innovation & Impact: Work on projects that push boundaries, drive sustainability, and create real-world solutions., • Professional Development: From mentorship, ongoing technical training, and conferences we invest in your growth every step of the way., • Work-Life Balance: Enjoy flexible schedules, generous PTO, and a culture that values balance so you can thrive both professionally and personally., • Shape the next generation: For experienced professionals, MJ offers the chance to mentor emerging talent, share your expertise, and leave a lasting legacy in the industry. Benefits & Perks • Competitive base salary between $48/hr - $60/hr with performance-based incentive payment plan/bonus structure., • Comprehensive benefits package, including medical, dental, vision coverage., • Generous Paid Time Off, including Parental Leave., • Company funded ESOP + 401(k) employer match., • Ongoing technical training and professional development opportunities. Join Us and Make a Difference Join a team where your work has purpose, your ideas are valued, and your growth is personal. Apply today and become a part of a company where you can #ownyourfuture.

Job Description We are currently seeking a Senior Water/Wastewater Civil Engineer/Project Manager for our Rochester office. Position will include project management, client relations, client outreach, design and construction oversight for engineering projects conducted in the area. Candidate will be expected to work as part of a design team or work independently with tasks that include business development, client meetings, presentations, and outreach, management of budgets and schedules for on-going projects, preparation of technical reports, construction cost estimating, contract documents and specifications, proposals and RFQ responses. Manage, coordinate and mentor staff including project level and field employees. Drive and support business development in the region. Manage schedules, budgets, and profitability of assigned projects.

Job DescriptionDescriptionKennedy Mechanical Plumbing and Heating is seeking a detail-oriented and motivated Plumbing Designer to join our growing team. In this role, you will work closely with project managers, field teams, estimators, and customers to design plumbing systems. The ideal candidate is organized, technically skilled, and passionate about delivering high-quality designs that support efficient project execution. Responsibilities • Prepare construction documents, shop drawings, and specifications for various commercial, industrial, and multi-family residential projects, • Assist in the development of design approaches and concepts on assigned projects, • Assist in data collection and/or field verification, • Research building, plumbing and gas codes, • Assist in selection of equipment to fit the project design, • Produce detailed plumbing layouts in Autocad and Revit, based on applicable codes and standards, • Produce plumbing fixtures schedules and rise diagrams, • Produce project-based plumbing drawings and specifications, • Ensure that all drawings are prepared with accuracy, neatness and timeliness (prior to project deadlines), • Communicate with team members, team leaders, other disciplines, and outside vendors to obtain necessary information for drawings, • Assist with on-site observations during construction and coordinate design requirements with contractors and equipment suppliers under the direction of the design manager, • Create and review permit, construction and shop drawings, • Interface with field personnel during construction to assist in resolving any field variance discrepancies Qualifications • Experience in plumbing design, mechanical construction, or related field, • Proficiency with AutoCad and/or Revit MEP design software, • General knowledge of Microsoft Office Suite, • Knowledge of plumbing systems including, but not limited to: sanitary and storm drainage, sanitary venting, domestic water systems, gaseous fuel piping, medical gas and process piping, • Strong attention to detail and organizational skills, • Excellent communication and teamwork skills, • Knowledge of building codes, engineering theories and methodologies, • Ability to read and interpret blueprints and technical documents Benefits • Competitive pay based on experience, • Health, Dental, and Vision Insurance, • Health Saving Account with company contribution, • Company Paid Life Insurance, • 401(k) plan with company matching, • Paid Holidays and PTO, • Company-paid training and development opportunities

Job Description Job Title: HVAC Design & Detailing Specialist Location: Rochester, NY and Central NY (with potential hybrid/on-site work model) Department: Detailing & Coordination Services Reports To: Detailing & Coordination Manager About Us Crosby Brownlie is a family-owned Commercial/ Industrial Mechanical and Design Build contracting firm with decades of experience delivering superior mechanical, plumbing, HVAC, and process piping solutions across commercial and industrial sectors. Our Detailing & Coordination Services team drives project success through detailed 3D modeling, accurate shop drawings, and seamless coordination across disciplines to support efficient construction and fabrication workflows. Position Summary We are seeking a detail-oriented HVAC Design & Detailing Specialist with strong CAD expertise to support our Detailing & Coordination Services team. The ideal candidate will be experienced in piping design within 3D environments, adept at producing fabrication-ready drawings, and skilled in collaborating across engineering, construction, and project management teams. Key Responsibilities • Develop accurate 2D and 3D piping layouts and models using CAD platforms (e.g., AutoCAD, Revit, Fabrication CADmep)., • Produce detailed shop drawings and spool drawings for fabrication and installation., • Participate in clash detection and coordination, identifying potential conflicts early and resolving issues with design and construction teams., • Support BIM modeling and visualization for complex piping and mechanical systems., • Collaborate with engineers, architects, field crews, and project managers to ensure design intent is correctly reflected in deliverables., • Ensure drawings and models comply with company drafting standards, codes, and best practices., • Assist with revisions, updates, and documentation as project designs evolve., • Support pre-construction planning by generating accurate construction documents and material take-offs. Required Qualifications • 2+ years of piping design and detailing experience, preferably in mechanical, process, or industrial project environments., • Proficiency with CAD/BIM tools, such as AutoCAD, Revit, Fabrication CADmep, Navisworks, or similar., • Strong understanding of piping design fundamentals and drafting best practices., • Experience with MEP/Process Piping coordination and detailing., • Excellent communication and teamwork skills, able to coordinate across departments and disciplines., • Keen attention to detail with strong problem-solving capabilities., • Ability to manage multiple priorities and meet project deadlines. Preferred Qualifications • Associate or bachelor’s degree in mechanical engineering technology, Drafting, CAD/BIM, or a related field., • Experience in clash detection workflows and coordination meetings., • Familiarity with construction industry standards and documentation processes., • Knowledge of fabrication and installation requirements for mechanical piping systems. What We Offer • Competitive salary and benefits package $80,000-$110,000+ (depending on qualifications and experience), • Opportunity to work on diverse and challenging projects, • Collaborative, growth-oriented work environment, • Professional development and training opportunities, • Company culture rooted in craftsmanship, integrity, and teamwork How to Apply (resume required) Send your résumé, cover letter, and portfolio samples (if available) \nCompany Description Great time to get involved with this rapidly growing company! Great time to get involved with this rapidly growing company!

Job Description Mindex is looking for a Software Engineer to join our Product division. You'll design and build cloud-native applications on .NET and AWS, using AI-assisted engineering practices throughout the development lifecycle. You'll work closely with Product, Test Engineering, Support, and CloudOps to deliver reusable services and reliable infrastructure. The ideal candidate is a curious, detail-oriented engineer eager to own solutions end-to-end and adopt modern AI-assisted workflows. Compensation $70,000 - $120,000 What You'll Accomplish • Apply AI-assisted engineering practices (AI DLC) across the development lifecycle, sharing effective workflows and patterns with the team., • Design and maintain APIs, background services, and reusable business logic using .NET and C#., • Build customer-facing features, including UI, Blazor apps, and .NET MAUI mobile functionality., • Develop cloud-native solutions and infrastructure as code on AWS, and support CI/CD pipelines and deployment automation., • Implement observability (logging, metrics, tracing, alerting) and investigate production issues to identify root causes., • Apply security, privacy, and least-privilege principles across application and infrastructure work., • Participate in technical design, estimation, code reviews, and incremental delivery., • Collaborate with Product, Test Engineering, Support, and CloudOps to resolve dependencies and deliver complete solutions., • Document architecture and technical decisions to support long-term maintainability. Requirements • Bachelor's degree in Computer Science or a related field, or equivalent professional experience., • Three or more years of software engineering experience developing and supporting production systems., • Experience with AI-assisted development tools and structured practices such as the AI DLC, including evaluating AI-generated output against normal engineering standards., • Experience developing applications and services using .NET, C#, Web API, ASP.NET MVC, and RESTful APIs, including reusable services and shared business logic., • Experience building web and cross-platform applications using HTML, CSS, JavaScript, AngularJS, Blazor, and .NET MAUI., • Working knowledge of relational database design, SQL, and performance troubleshooting., • Hands-on experience with AWS services such as ECS, Lambda, S3, SQS, SNS, CloudFront, DynamoDB, Secrets Manager, IAM, and CloudWatch, and understanding of cloud architecture, security, and high availability., • Experience with infrastructure as code (AWS CDK, CloudFormation, or similar) and CI/CD pipelines, preferably Azure DevOps., • Experience implementing observability (logging, metrics, tracing, alerting) and troubleshooting distributed applications and production issues., • Experience with automated testing, source control, code review, and Agile delivery in cross-functional teams., • Strong communication, collaboration, and technical documentation skills. Licenses & Certifications: • AWS certifications (e.g., AWS Certified Developer or AWS Certified Solutions Architect) are a plus. Why Join Mindex? For more than 30 years, Mindex has helped organizations solve complex business challenges through custom software, cloud, data, and AI solutions. We combine deep technical expertise with a collaborative culture that empowers our employees to innovate, grow, and make a meaningful impact for our clients. In our Product division, our teams have built platforms such as SchoolTool, Advanced Analytics, and our Integrations Platform from the ground up, while also supporting solutions like MTSS Edge and ClearTrack that help schools and organizations make smarter, data-driven decisions. Benefits • Fully Remote Work Environment, • Flexible Time Off, • Medical, Dental, and Vision Insurance, • 401(k) with Company Match, • Company-Paid Life and Disability Insurance, • Professional Development Opportunities Additional Information Applicants must be authorized to work for any employer in the United States. Mindex is unable to sponsor employment visas at this time. Physical Requirements/Conditions • Prolonged periods sitting at a desk and working on a computer., • No heavy lifting is expected. Exertion of up to 10 lbs.

Job Description A Trusted CRO Partner for the Future of Eye Care iuvo Clinical is a full-service ophthalmology-focused contract research organization(CRO) dedicated to improving patient’s quality of life with breakthrough eyecare therapies. We combine decades of specialized experience with a high touch, high science approach, partnering with innovators to accelerate ophthalmic breakthroughs from concept to commercialization. Whether advancing a novel retinal therapy or supporting a complex ocular device trial, we provide the expertise, flexibility, and personal dedication to ensure clinical trial success. We offer a comprehensive benefits package and the opportunity to broaden your experience and grow your career! We currently have an opportunity for a Clinical Study Manager to join our Clinical team. The Clinical Study Manager (CSM) works in collaboration with the Project Manager and Sponsor on the strategy, planning, and successful execution of clinical programs. The CSM partners with other internal and external parties to ensure clinical trial activities and deliverables are completed on time and within budget. As a member of the Clinical team, the Study Manager is responsible for assigned clinical programs including, but not limited to, oversight of key project deliverables, resources, including CRA team, timelines, clinical trial site logistics and communications in the most cost and time effective way, while assuring quality and GCP compliance. The Study Manager takes accountability for operational aspects of assigned clinical study/ies and assumes varied levels of responsibility for study budget tracking, training of both CRO and site staff and the management of activities conducted by contract CRAs. The Study Manager also ensures trials are conducted in adherence to study protocols, applicable SOPs, FDA regulations, ICH/GCP guidelines and local government regulations. ESSENTIAL DUTIES AND RESPONSIBILITIES • Support and/or lead the administration, coordination and management of study activities across multiple functional groups., • Coordinate clinical study timelines with Project Management to meet critical milestones and Sponsor corporate goals; escalate issues that may jeopardize timelines and deliverables., • Conduct and implement required internal and site training; coordinate operational and therapeutic area training by Medical Monitor for internal study team members., • Participate in study planning and set-up activities including vendor management, project management and the coordination of study and implementation plans., • Oversee site identification feasibility, evaluation and selection., • Review CRA site visit reports and take action as required with Sponsor and/or sites. Provide input into EDC/eCRF design and user acceptance testing, as needed., • Manage relationship with the sponsor, CRO, investigative site staff, laboratory, pharmacy and other internal and external personnel, as applicable., • Review study documentation for accuracy, completeness and turnaround times; solicit, • information to support inquiries., • Participate in protocol review and provide input as needed, • Create and implement study-specific plans and templates, clinical monitoring plans and report templates, and monitoring tools and documents., • Monitor site subject recruitment activities and report progress to PM and/or project team. Create investigator meeting training material and participate in the presentation of IM material, participate in the planning of offsite meetings., • Monitor the progress of studies, data flow, identifying study related trends/issues and work with Project Management to implement corrective actions when necessary., • Provide regular updates of study progression to Project Manager and executive management., • Develop site-facing materials as needed including logs, source documents/worksheets/checklists, study newsletters, presentations, etc., • Create and maintain FAQ/Decision Logs., • Work with other team members and sites to create and execute recruitment plans in order to meet or exceed enrollment timelines., • Manage the tracking and forecasting of key study metrics and deliverables., • Develop tables, spreadsheets, charts and/or graphs for use on project calls., • Work with the Finance department to review site payment reports for accuracy. QUALIFICATION REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE: • Bachelor’s Degree with a major/focus in relevant discipline or equivalent., • Ophthalmology experience preferred, with management or lead experience., • Prior experience in the drug/device development space, preferably within clinical operations. COMPUTER SKILLS: • Proficiency with Microsoft Office (Word, Excel, Outlook, Teams) and other software/programs as applicable including survey tools such as SurveyMonkey, Microsoft Forms. COMMUNICATION and INTERPERSONAL SKILLS • Ability to act as an empathetic and trustworthy leader who supports listening, constructive feedback, and open communication., • Develop and foster peer and cross-functional relationships to maximize best practices, knowledge sharing, and team effectiveness., • Build strong rapport and relationships with internal teams, clients, and vendors., • Successfully influence and negotiate with other stakeholders. Demonstrate effective verbal and written communication skills required to interact with clinicians, clients, vendors, FDA Inspectors and internal project team members through demonstration of: • Excellent presentation and interpersonal skills, including clear, succinct, and timely communication, • Sharing ideas in a constructive and positive manner, • Listening to and objectively considering ideas and suggestions, • Keeping commitments, • Keeping others informed of work progress, timetables and issues, • Addressing problems/issues constructively to find mutually acceptable solutions, • Respecting the diversity of our work force in actions, words, and deeds, • Read and comprehend work instructions/SOPs and protocols and write clear concise reports MATHEMATICAL SKILLS • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. OTHER SKILLS AND ABILITIES: • Understand and demonstrate compliance with FDA, ICH/GCP/GDP, HIPAA, and IRB requirements/regulations, • Ability to apply project management principles to daily activities., • Ability to work both independently and/or collaboratively as an effective member of a team., • Utilize sound judgement and decision-making ability., • Possess superior client orientation skills, • Be highly self-motivated with a strong ability to self-direct and self-initiate., • Strong ability to manage, or seek advice in order to manage, sensitive issues effectively and proactively., • Ability to approach all work activities and interactions with a high level of integrity., • Possess strong analytical skills, with attention to detail and process PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit or stand at a desk, talk and hear. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Office setting / remote home office. iuvo Clinical fosters a video-first environment; employees are expected to have their cameras on for all internal and external meetings, check-ins, and collaborative sessions. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. LOCATION Remote; Near major airport TRAVEL <5% travel DISCLAIMER This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. iuvo Clinical is an Equal Opportunity Employer

Job Description Insero Talent Solutions is honored to be exclusively retained to conduct the executive search for a Chief Human Resources Officer (CHRO) for St. John Fisher University. Overview: St. John Fisher University is an independent, liberal arts institution that provides a transformative education to approximately 3,800 undergraduate, master's, and doctoral students each year. Across its five Schools, Fisher offers nearly 40 majors in the humanities, social sciences, natural sciences, business, education, and nursing; 11 pre-professional programs; and master's and doctoral programs in business, nursing, education, pharmacy, and public health. The University's residential campus boasts a robust living and learning community and a successful intercollegiate athletics program. Fisher is a community where all are welcome, regardless of religious or cultural background. The University continues to honor its founders, the Congregation of St. Basil, by embracing their motto, “Teach Me Goodness, Discipline, and Knowledge.” We are located in Pittsford, N.Y., seven miles outside of the city of Rochester. The campus is situated on 164 park-like acres - a beautiful setting for a warm, friendly campus community. Position Summary: Reporting to the President, the Chief Human Resources Officer (CHRO) serves as the strategic and operational leader responsible for advancing the University's mission through effective human capital management. The CHRO oversees the development, implementation, and evaluation of HR programs and services that support faculty, staff, and administrators, ensuring alignment with institutional goals. As a key advisor to senior leadership, the CHRO fosters collaborative relationships across the University, strengthens HR's role as a strategic partner, and promotes a positive and inclusive workplace culture. This role provides leadership and direction to the HR team, ensuring high-quality, responsive service delivery while proactively addressing organizational needs. The CHRO is accountable for ensuring consistent application of HR policies and compliance with employment laws and regulations, mitigating organizational risk. Additionally, the CHRO serves on the Senior Staff and represents Human Resources on university-wide committees partnering with key stakeholders, including the Title IX officer, to support a healthy, engaged campus environment. Job Responsibilities: Leadership and Strategy · Provides leadership, direction, supervision, and oversight of HR operations and staff · Ensures high-quality delivery of HR programs and services · Anticipates and resolves operational issues and continuously improves processes · Develops and manages the annual HR budget Talent Management · Develops and implements strategies aligned with university goals, including workforce planning and succession planning · Partners with leadership to align staffing plans with budgeting and organizational needs · Oversees recruitment, onboarding, and retention strategies to ensure consistency and effectiveness Employee Development · Establishes and directs the University's training and development strategy · Oversees implementation of development programs that strengthen leadership and workforce capability · Partners with leadership to identify needs and design effective people solutions Employee Relations · Provides strategic leadership for employee and labor relations, including oversight of workplace investigations, conflict resolution, and guidance to leaders on personnel matters · Designs and implements initiatives that enhance employee engagement, collaboration, and a positive campus culture Performance Management · Oversees the University's performance management framework to ensure effectiveness, consistency, and equity across the organization · Oversees the administration of performance management processes by ensuring leaders are equipped to provide ongoing feedback, coaching, and development, and to address performance concerns · Leads the University's progressive disciplinary process, ensuring that disciplinary actions are appropriate and in accordance with policy guidelines. Policy and Process Development · Ensures accuracy and effectiveness of HR policies, including the Employee Handbook · Maintains compliance with all applicable federal and New York State regulations including but not limited to: Affordable Care Act (ACA), FLSA, ERISA, FMLA, NYSPFL, HIPPA, ADA, and COBRA. · Leads process and system improvements to enhance efficiency and decision-making through technology and data Total Rewards · Oversees compensation and benefits strategy to ensure market competitiveness and internal equity · Directs salary administration, classification, and benefits programs · Ensures effective management of health, welfare, retirement, and wellness programs Organization Communications and Change Management · Leads HR communications and supports effective dissemination of employee information · Drives process improvements and change initiatives to enhance HR services · Assesses organizational readiness and supports implementation of strategic initiatives Education/Experience: Required • Bachelor's degree in Human Resources, Business Administration, Higher Education Administration, or related field, • Minimum of 8 years of progressive HR leadership experience, including in a Senior Leadership role. · Demonstrated expertise in employment law, regulatory compliance (federal and New York State), employee relations, and strategic HR planning. · Financial expertise in budget management and vendor oversight · Experience driving change management and process improvement initiatives Preferred · Master's degree in Human Resources, Business Administration, Higher Education Administration, or related field · Experience working in Higher Education · SHRM-SCP, SPHR, or equivalent professional industry certification. · Familiarity with academic personnel processes and faculty affairs Competencies/Skills: · Effective Written and Verbal Communication · Accountability · Customer Service Orientation · Collegiality/Collaboration · Team Leadership · Initiative · Analytical and Conceptual Thinking Supervision of other Employees: Responsible for overseeing the Human Resources Department, comprised of the following roles: • Analytics & Compensation Coordinator, • Talent Manager, • Sr. Human Resources Manager, • Human Resources Assistant Full-Time: 12 months, 35 hours/week On campus

Job Description The Louis S. Wolk Jewish Community Center of Greater Rochester is located alongside the Erie Canal in Brighton and is a 200,000 square foot facility that houses our state-of-the-art fitness, wellness and recreation programming, an aquatics center, a Professional Theatre, Children’s Center and our Camping Program. We pride ourselves on providing our members with quality educational, cultural arts and social programming, and we are an inclusive community center that welcomes people of all faiths, backgrounds, and ages. The Campaign Manager is a key member of the Development team, responsible for managing donor data systems, implementing annual campaign strategies, tracking campaign performance, and generating reports that inform strategic decision-making. This role also supports stewardship activities, coordinates fundraising event logistics, sends mass donor communications, and responds to general donor inquiries. The ideal candidate is proactive, analytical, and equally comfortable behind a spreadsheet or engaging with donors, volunteers, and senior staff. They bring care, discretion, and strong communication skills to this critical role, helping to strengthen community impact through effective and efficient development operations. Essential Duties and Responsibilities: Donor Data & Reporting • Manage and optimize the Raiser’s Edge donor database to ensure accurate and timely gift entry, record maintenance, and overall data integrity., • Leverage advanced features in Raiser’s Edge, including dashboards and segmentation tools, to monitor campaign performance and donor engagement., • Generate and maintain detailed reports on fundraising activity, donor trends, and development metrics to inform strategy and decision-making., • Partner with the finance team to reconcile donations and ensure accurate monthly and annual revenue reporting., • Serve as the primary point of accountability for donor data accuracy and the creation of reports that support development planning, stewardship, and organizational impact. Donor Cultivation, Stewardship & Engagement • Maintain & build strong, ongoing relationships with donors through personalized cultivation and stewardship strategies to ensure high donor retention and appreciation., • Support a portfolio of 100–250 mid-level donors (gifts ranging from $250–$2,500), including tracking touchpoints, ensuring timely follow-ups, and identifying upgrade opportunities., • Collaborate with the Director of Development to identify donors with major gift potential and coordinate cultivation strategies., • Execute donor recognition activities, including thank-you letters, public recognition, naming opportunities, and impact reports., • Assist in identifying and cultivating planned giving prospects to help build long-term sustainability. Communications & Content Creation • Manage department email communications using platforms such as Constant Contact & Raiser’s Edge; design, execute, and analyze email campaigns., • Create compelling fundraising content for appeals, newsletters, social media, and stewardship materials., • Support production of development letters, reports, and documents (e.g., mail merges, labels, spreadsheets). Fundraising Campaigns & Events • Plan, manage, and execute all annual fundraising campaigns, including direct mail, email, and digital giving efforts, in alignment with strategic goals., • Coordinate logistics for development events, including invitations, RSVP tracking, vendor communication, setup, and post-event follow-up., • Develop and manage sponsorship opportunities; cultivate relationships with local businesses for event partnerships and matching gifts. Administrative & Departmental Support • Respond to donor and community inquiries with professionalism and timely follow-up., • Maintain organized digital and physical development records., • Provide cross-functional support for development initiatives, events, and general office functions. Education and Experience • Bachelor’s degree required; relevant fields include communications, nonprofit management, marketing, or related discipline, • 1–3 years of experience in nonprofit development, fundraising operations, or donor engagement, • Proficiency with donor databases (Raiser’s Edge or similar CRM required), including queries, reports, and data segmentation, • Strong written and verbal communication skills; experience creating donor-centric content is a plus, • Proven ability to manage multiple priorities, meet deadlines, and pay close attention to detail, • Demonstrated experience planning and coordinating fundraising campaigns or events, • Strong analytical skills; ability to interpret data and apply insights to campaign strategies, • Familiarity with email marketing tools (e.g., Constant Contact) and Microsoft Office Suite, • Ability to work independently and collaboratively in a fast-paced, mission-driven environment, • Comfort interacting with donors and community members with professionalism and discretion Benefits • Health, Dental and Vision, • Retirement Plan, Life and Disability Insurance, • Employee Assistance Program, • Free membership to our Fitness and Aquatics Center

Job Description Overview Who we are— Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here’s what Transcat has to offer— • Work that matters., • A values-based culture where people care about each other and the work they do together., • Flexibility, • Training and development to accelerate learning and career advancement., • Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE!, • Pay range is $22.00 - $38.00/hr (ALL LEVELS) Responsibilities Major Areas of Responsibility • Perform their own calibration work with little to no supervision, • Must be able to explain calibration issues and processes to customers when needed, • Coordinate and manage daily workloads without direction from manager, • Able to conduct calibration work at customer onsites with little to no supervision, • Identify and utilize appropriate measurement techniques and be able to design budgets., • Clear comprehension of uncertainties, • Maintain calibration standards., • Must be able to perform these functions within a laboratory or customer onsite setting, • Must be able to gather and process data review when necessary, • Must be able to travel up to 50% of designated work schedule Primary Objectives: • Train and develop fellow technicians in a management role, • Coordinate work schedule for the lab, • Develop and implement process improvements, • Provide detail analysis of calibration processes and uncertainties, • Develop and produce budgets, • Develop and produce data reviews Qualifications Required Knowledge, Skills and Abilities: • Must be fully experienced in at least two disciplines or advanced understanding of multiple disciplines, • Extensive statistical background preferred, • Familiarity with complex tools and equipment, • Must be able to work with and understand new equipment, • Advanced proficiency with office computer software including Microsoft Word, Excel and Outlook, • Advanced organizational and time management skills, • Elite interpersonal skills when interact with customers, • Position will include team lead and managerial responsibilities, • Candidates with experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics highly desired Education and Experience: • Associates degree (A. A.) or equivalent from two-year college or technical school, • 5+ years related experience and/or training; or equivalent combination of education and experience., • PMEL (Precision Measurement Equipment Laboratory) or TMDE (Test Measurement Diagnostic Equipment) training + military experience in the calibration field plus 2+ years civilian experience preferred., • Senior calibration technicians will be required pass the ASQ CCT. Equal Opportunity and Non-Discrimination Transcat is an equal opportunity employer and prohibits discrimination on the basis of any protected status. All qualified applicants will receive consideration for employment without regard to color, creed, disability, domestic violence victim status, gender identity, genetic predisposition or carrier status, marital status, national origin, pregnancy, race, religion, sex, sexual orientation, status as a protected veteran or as a member of any other protected group or activity. *Hourly rate ranges from $19/hr-$35 depending on level of experience. We will make reasonable accommodations for personal with disabilities to enable them to perform the essential functions of this position unless to do so poses an undue hardship on the organization or a direct threat to health or safety reasonably accommodate individuals to perform the essential functions of this position.

Job Description Title Quality Engineering Manager Department Quality Reports to Director of Quality SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Position Overview: The Quality Engineering Manager provides leadership for the Quality Engineering team supporting the manufacture of precision optical components, assemblies, and systems. This position is responsible for the day-to-day management, coaching, mentoring, and development of Quality Engineers, and assisting the Director of Quality with the drive for quality improvements across fabrication, coating, assembly, inspection, and manufacturing operations. Working closely with Manufacturing, Engineering, Operations, and Program Management, the Quality Engineering Manager works to improve process capability, reduce variation, resolve complex manufacturing issues, and ensure products consistently meet customer, regulatory, and internal quality requirements. This individual serves as a technical leader who fosters continuous improvement through the deployment of a high-performing engineering team capable of supporting a demanding, precision manufacturing environment. Key Responsibilities: • Lead, coach, mentor, and develop the Quality Engineering team through regular feedback, technical guidance, and professional development., • Oversee completion of workload governed by quality engineering project Gantt and Quality roadmap established by Director of Quality, and ensure appropriate engineering support across manufacturing operations., • Assist in the recruitment, onboarding, and development of Quality Engineers while guiding technical capability throughout the organization., • Foster a culture of collaboration, continuous learning, and proactive problem solving within the quality function and throughout the organization., • Provide technical leadership supporting the manufacture of precision optical components and assemblies, ensuring compliance with customer specifications and internal quality standards., • Partner with Manufacturing Engineering and Operations to improve process capability, increase yields, and reduce scrap and rework throughout optical fabrication, thin film coating, molding, precision machining, and assembly operations., • Assist with the development and maintenance of inspection strategies, control plans, and quality documentation supporting new and existing products., • Ensure appropriate statistical methods and process controls are utilized to monitor manufacturing performance and identify opportunities for improvement., • Support new product introductions by developing quality plans, participating in design reviews, and ensuring manufacturing readiness., • Lead complex root cause investigations utilizing structured problem-solving methodologies including 8D, 5 Why, Fishbone, and statistical analysis., • Drive the use of corrective and preventive actions (CAPA) to ensure sustainable improvements and prevent recurrence of quality issues., • Drive the use of, and assist with Lean Manufacturing and Six Sigma principles to reduce process variation, improve throughput, and lower Cost of Poor Quality (COPQ)., • Monitor quality performance metrics including scrap, internal defects, customer returns, escapes, and corrective action effectiveness. Required Qualifications & Skills: • Bachelor’s degree in Mechanical Engineering, Optical Engineering, Manufacturing Engineering, Industrial Engineering, or a related technical discipline., • Minimum 7 years of progressive quality engineering experience within a manufacturing environment., • Previous experience leading or supervising Quality Engineers in a manufacturing environment., • Experience supporting precision optical fabrication, thin film coating, optical assembly, or other high-precision manufacturing processes desired., • Strong understanding of precision optical manufacturing processes, inspection methods, and metrology desired., • Proficiency interpreting engineering drawings, optical specifications, and GD&T requirements., • Experience applying Lean / 6 Sigma tools & methodologies that include Statistical Process Control (SPC), process capability analysis, Measurement System Analysis (MSA), and Gage R&R techniques., • Experience with project planning and organizational tools for goal and personnel deployment., • Working knowledge of metrology equipment including Coordinate Measuring Machines (CMM), vision systems, optical comparators, and other precision measurement systems desired., • Proficiency with statistical analysis software such as Minitab and manufacturing ERP/MES systems. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude; Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Environment & Physical Demands: • Work is performed in a controlled manufacturing environment requiring adherence to contamination control practices, including the use of protective garments such as frocks and hair coverings., • Requires use of appropriate personal protective equipment, including safety glasses and cleanroom garments., • Position involves a combination of standing, walking, and sitting for extended periods, along with occasional stooping, kneeling, and reaching., • Regular use of computers and standard assembly or inspection tools, • Ability to lift up to 50 lbs. as needed. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Work Schedule: Monday – Friday, 7:00 AM – 3:30 PM. This position follows a consistent first-shift schedule, with some flexibility in hours as needed to support quality, manufacturing, and business needs.