Trabajos field service technician en Dallas, Texas - Page 2Crear alertas

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: The Special Events Service Technician is responsible for operating a company service truck and driving to various locations at an event to service/pump/clean portable restrooms or holding tanks. This position also performs basic pick-up and delivery of units and the installation and removal of temporary fences at special events. Workdays are Thursday - Monday. The Special Events Service Technician must be willing to travel to support special events throughout the region and to support other regions as needed. Responsibilities: • Conduct daily pre-shift vehicle inspection & report deficiencies to management immediately. Conduct daily inspection of all tools assigned to the truck to ensure safety and proper working condition. Check loads to ensure that truck has all material (units, fence panels, poles, etc.) and tools needed to complete service tickets, • Operate service trucks to and from pre-designated work sites based on assignment information. Maintain a clean and fully stocked truck, • Operate flatbed trucks to and from pre-designated work sites based on daily routing information to deliver or pick up portable restroom units, hand sinks, holding tanks, or containers. Update system and tickets with relevant delivery or pick-up detail, • Operate fence trucks to and from pre-designated work sites based on daily routing information to deliver or pick up the fence (chain link, panel, materials, etc.). Also, act as a point of contact on fence jobs where a crew is assigned to the job/truck and will operate fence installation equipment, • Operate tanker/transfer truck to and from the local dump and completes required paperwork as necessary, • Service portable restrooms, holding tanks, septic tanks, sinks, showers, etc., at various work sites by following the Company's servicing guidelines. Notifies management of any issues encountered on route assigned, • Unload all fence materials and install fence panels, with appropriate tools, at the work site in accordance with pre-determined specifications. Locate, measure, and mark the location for placement of panels & installation, • Troubleshoot and address all basic repair and maintenance as needed on-site so as to not disrupt the customer experience. Report all special maintenance requests and/or equipment replacements in FSL, • Perform pick-up and delivery of United Site Services (USS) units at customer locations in a timely manner in accordance with customer needs, • Strategically plan for customer needs by discussing their pickup and delivery needs, so the customer's current and future needs are satisfied, • Work with dispatch to keep updated on service schedule changes throughout the day and adapt to changes as needed, • Conduct all work duties in a safe manner in accordance with USS and DOT safety standards to ensure no accidents or injuries, • Interact with customers on-site to ensure they are getting the services completed to their standard, • Work with Operations Manager/Supervisor/Coordinator by providing customer feedback as it relates to service needs and expectations, • Meet with site superintendent (or other designated representative) to confirm work order, • Maintain telephone or radio contact with supervisor to receive additional instructions, changes to work locations, etc, • Maintain truck log according to state and federal regulations, • Perform other duties as assigned Qualifications:, • Minimum two years of commercial driving experience., • Valid Commercial Driver's license (Class CDL A or B with endorsement or Class C, D, or E (depending on state)., • Excellent time management, customer service and communication skills., • Strong problem-solving and decision-making skills., • Ability to meet deadlines. Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP), • Employee Discounts Salary Range: $29.03 – $42.09 / hour Pay Transparency Statement: At United Site Services, our salary ranges reflect the minimum and maximum base pay for the posted position applicable to all locations across the US. Within the posted salary range, individual pay is determined by the geographic location, job related skills, experience, education, and certifications. Our total compensation package includes base pay plus a comprehensive benefits program. EEO Statement: Some positions may require secure site access and/or domestic air travel. All candidates for positions which require secure site access and/or domestic air travel must possess an acceptable form of identification to comply with state and federal regulations, such as REAL ID-compliant driver’s license or state ID, or U.S. passport. This statement is not intended to require documentation beyond what is acceptable under the federal I-9 form process administered by the U.S. Citizenship and Immigration Services (USCIS); and should not be construed as creating additional employment eligibility verification requirements. United Site Services is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers.

Job Description Located in beautiful Southern Oregon - External candidates may be eligible for Relocation Assistance! Additional Position Details: FTE: 1.0 | Full Time | Days Salary: Wages start at $31.25 an hour and the midpoint is $39.07 an hour. Increases are based years of experience in the field. Plus, you will earn extra shift differentials for swing, night, and weekend hours: • $1.62 extra for working between 3:00pm - 11:00pm, • $3.00 extra for working between 11:01pm and 7:00am Recently recognized as a level 2 trauma designation, Asante Rogue Regional Medical Center (ARRMC) has a state-of-the-art surgical department with 20 OR suites, including 2 dedicated cardiac surgery suites and 2 hybrid operating room. With 10 blocks per day, ARRMC performs approximately 10,000 cases per year with a variety of specialties. These specialties include general/vascular, neurosurgery, total joint/orthopedics, bariatric surgery, trauma, ENT, plastics, gynecology, urology and cardiothoracic surgery. As a progressive surgical hospital, ARRMC performs robotic urological, gynecological, and general surgery - and was one of the first in the state of Oregon to employ the use of the Mazor neurosurgical robot and to perform transcather aortic valve replacement (TAVR). ARRMC also performs Davinci Si and Xi robotic surgeries in general, urology and GYN specialties. As the region's referral center, serving nine counties, ARRMC is also recognized as a top cardiac surgery hospital in the Northwest performing approximately 600 heart cases and 400 lung cases per year. We are seeking an impressive Surgical Technologist to join the Surgical Team at ARRMC. At Asante, Surgical Technicians are a highly valued member of the patient care team in Surgery, working under the supervision of the Charge Nurse. As a Surgical Technologist at Asante, you will have the opportunity to join a team where camaraderie extends into personal life and where high performance is expected. What You’ll Do • Become a critical member of the surgical team by functioning as a Surgical Technician in the Operating Room under the Association of Operating Room Nurses (AORN) and Certified Surgical Technician (CST) guidelines., • Anticipate the needs of the surgeon, pass appropriate instruments, and assist in exposure of the surgical field., • Select and prepare the appropriate supplies and equipment for surgical cases and operate all surgical equipment., • Organize instrumentation and the sterile field., • You have knowledge of procedure and technique in caring for patients, equipment, and supplies., • You can demonstrate aseptic technique, scrub, gown and glove counts; and other aspects of scrub role under the AORN and CST guidelines., • You can task-switch rapidly without losing your efficiency or your focus. ONE of the following is required: • Graduate of a nationally accredited, approved by the OHA, education program for surgical tech and has, or is able to obtain, Certified Surgical Technologist (CST) by the National Board of Surgical Technology and Surgical Assisting (NBSTA) or the National Center for Competency Testing (NCCT) within 12 months of graduation, or, • In lieu of CST, OSA (Ophthalmic Surgical Assisting) subspecialty certification from JCAHPO will be accepted, or, • In lieu of certification; completed training for surgical techs in the military and has completed 16 hours continuing education every 2 years, or, • Provides documentation showing surgical tech practice during at least 2 of the 3 years immediately preceding 01/01/2017 and completes 16 hours of continuing education every 2 years, or, • Earn a competitive and progressive salary, • Benefit from health plans that are focused on health and wellness including medical, dental, vision and wellness beginning within 30 days of hire, • On-call employees may receive an additional 15% for flexibility, • Plan for your future with a retirement package that includes up to 6% employer contribution, • Experience a healthy work-life balance with our generous earned time off (ETO) At Asante we believe that we are defined by our values – the traits that guide us as we serve patients and the community: Excellence - Respect - Honesty - Service – Teamwork Asante is an equal opportunity employer. We are committed to employ and advance in employment women, minorities, qualified individuals with disabilities and protected veterans.Asante is a locally-managed, nationally recognized top 15 health system. We are located in beautiful Southern Oregon and are the largest healthcare provider in nine counties. We provide comprehensive medical care to more than 580,000 people throughout southern Oregon and northern California. Our facilities employ over 6000 people and include Asante Ashland Community Hospital in Ashland, Asante Rogue Regional Medical Center in Medford, Asante Three Rivers Medical Center in Grants Pass, Asante Physician Partners, and additional healthcare partnerships throughout the region. Our mission is simple: Asante exists to provide quality health care services in a compassionate manner valued by the communities we serve.\r\n\r\nAt Asante we believe that we are defined by our values – the traits that guide us as we serve patients and the community:\r\n\r\nExcellence - Respect - Honesty - Service – Teamwork\r\n\r\nAsante is an equal opportunity employer. We are committed to employ and advance in employment women, minorities, qualified individuals with disabilities and protected veterans.

Job Description Thompson Law’s vision is to be the law firm of choice for every person injured or killed due to preventable tragedy while providing our clients world-class service and record-setting results. We have built a spectacular team that delivers on those ideals, driving incredible growth and opportunity. Thompson Law, a nationally growing personal injury firm based in the Oak Lawn area of Dallas, seeks a Case Manager to join the team! The Position: This role will be crucial in managing and coordinating medical treatment for our clients who have suffered personal injuries, ensuring they receive timely and appropriate medical care throughout their cases. Responsibilities: • Independently manage treatment in personal injury cases., • Collaborate with attorneys, clients, and insurance adjusters., • Communicate with clients, medical providers, insurance companies, and other parties to obtain necessary medical information., • Monitor and track clients' medical treatment progress and appointments, coordinating and scheduling as necessary., • Review and organize medical records, bills, and other relevant documentation., • Maintain detailed case management records and conduct legal research as needed., • Stay updated on changes in medical treatment protocols, healthcare regulations, and industry best practices., • Provide excellent customer service to all clients and partners. Qualifications: • 3+ years of experience in a law firm with personal injury experience or an injury-related field (e.g., emergency medical technician (EMT), nurse practitioner, insurance adjuster)., • Bilingual in English and Spanish (preferred)., • In-depth knowledge of medical terminology, procedures, and billing practices., • Proficient in administrative skills and ability to use legal case management software and other relevant tools., • Excellent attention to detail, strong organizational skills, and the ability to manage multiple tasks effectively., • Strong verbal and written communication skills and the ability to interact effectively with various parties., • Demonstrated ability to work independently and collaboratively in a fast-paced environment., • Ethical and professional conduct with a commitment to maintaining client confidentiality. Total Compensation Package: • Salary + Bonus, • Employee Health Insurance premium 100% paid by the firm, • Dental & Vision, • FSA/HSA, • Generous paid time off and paid holidays, • 401(k) with employer matching, • Basic life insurance 100% paid by the firm, • Monday to Friday work schedule with no weekends If you're ready to contribute your talents as part of one of Texas's fastest-growing personal injury firms while enhancing your skills within a dynamic environment—apply today! Powered by JazzHR xXFdRw8vUQ

Job Description GENERAL DESCRIPTION The Senior Technical Trainer will lead and drive to completion all assigned duties to enable the Technical Training Department to provide equipment training to customers and internal service personnel. The ideal candidate will have at least 5 years' experience in the semiconductor industry and 3 years' of training experience. ROLES & RESPONSIBILITIES • Trains and Mentors less experienced Technical Trainers., • Develops new training courses/materials, as required, using currently accepted methods and tools from factory sourced documentation with minimum supervision and/or guidance, • Performs stand-up instruction of all training courses currently provided by the Training Department, as required, for both internal and external customers, utilizing established teaching methodologies, while maintaining a minimum evaluation rating of 3.5 on SF 6.2-3.1.2 Instructor Evaluations., • Works with Engineering, Customer/Product Support and Manufacturing to ensure that course materials reflect current product features, and is responsible for conducting audits/assessments of course materials, as needed, to determine their applicability to changing requirements., • Oversees and drives to completion special projects and assigned tasks with a minimum of supervision and/or guidance., • Interacts with customers and functional organizations to develop Specifications/Procedures used within training courses., • Learns and maintains proficiency in the use of the required software utilized to create/modify both existing and new training course materials., • Travels up to 30% to conduct on-site training., • Prepares student-training guides utilizing established Master Lesson Plans., • Maintains and repairs training plasma etch equipment as necessary., • Maintains a professional appearance and relationship with customers., • Prepares lesson plans from engineering documentation, field service requirements or software documentation., • Associates Degree in related field preferred (or), • Minimum of five years’ experience in the semiconductor industry, preferably as an etch technician in a clean room environment., • Teaching experience: Minimum 3 years’ experience delivering stand-up classroom training on etch equipment. Adobe Acrobat X Standard Adobe Captivate 7 and Above Adobe Flash Professional CC/Animate CC Adobe Photoshop CC and/or Corel PHOTO-PAINT Audacity CorelDRAW X5 and Above • Ability to learn any new software necessary to create training materials., • Excellent oral communication skills are a must. 2ydNWDv8Cs

Job DescriptionThe Senior Technician - Security; will provide efficient and high-quality installations related to integrated security systems. This position will require a high level of project involvement, including the physical installation, testing and closing-out process. Responsibilities: • Serve as the subject matter expert and mentor to assigned team of technicians, • Install, test, troubleshoot, repair, and maintain all Security systems at customer sites, • Installation will include, but not limited to: Video NVR/Servers, IP Cameras, Access Control Devices, Intrusion Devices, Head End Panel Installations, Intercoms, Wireless Devices, Switch Gear., • Perform assigned projects within scope, in a timely manner, and on budget, • Provide customers with system operation and training, • Excellent attention to detail including maintaining concise daily records and following of operational standards and practices, • Maintain a professional appearance and attitude, • Adhere to all applicable safety rules and regulations, • Review materials options and verify count accuracy, • Maintain a clean and orderly jobsite, • Facilitate the delivery of staged materials to the jobsite, • Coordinate with Project Management and Field Technicians for project scheduling, • Work at required heights utilizing ladders, scaffolding, lifts, or other., • Work in confined spaces as necessary.Required Qualifications:, • 5+ years of work experience as a Senior / Lead Technician with a security integrator (including current manufacturer certifications), • Industry experience working with access control, video surveillance, and intrusion, • Valid US drivers license with acceptable record, • Industry Experience: Healthcare, Education, Manufacturing, Utilities, Financial & Hospitality., • Video Surveillance: Avigilon, Genetec, Milestone, Bosch, Axis, Hanwha, Exacq., • Access Control: Lenel, Software House, Avigilon, Genetec, Identiv, Honeywell, Open Path, RS2, S2, AMAG, Gallagher, Open Options., • Intrusion: DMP, DSC, Honeywell, Bosch., • Locking Hardware: Maglocks, Strikes, Mortise, Cylindrical, ADA applications., • Data Terminations., • Field engineering or estimating skills., • Updating blueprints on Bluebeam., • Experience with Procore, Fieldwire, Smartsheets, etc., • Experience with programing, testing and training end users on various security systems., • Out of town travel work if required., • Vaccinations may be required by our customers, specifically related to any worksite location in the health care industryDemonstrated Professional Competencies:, • Ability to troubleshoot electronic systems and find solutions, • Ability to use sound judgment and perform under pressure, • Ability to operate as part of a team, • Great written and verbal communication, • Good troubleshooting skills, exceptional customer service, • While performing the duties of this job, the employee will be exposed to outdoor weather conditions, work on job sites, may be required to travel to and from job site locations, may work in a typical office environment, and is occasionally exposed to construction equipment. The noise level in the work environment is usually moderate. Confined space entry may be required. High work may be required.PAY RANGE: $30.00ph - $37.00ph DOE BENEFITS: Colleagues and their families are covered by medical, dental, vision, company provided basic life insurance and AD&D and short-term disability, telemedicine & virtual counseling. Voluntary insurances offered include life insurance and AD&D, short-term disability (buy-up option), long-term disability, accident, critical illness, and hospital indemnity insurance, and HSA & FSA accounts. Colleagues may also enroll in the company’s 401(k) plan. Colleagues will also receive PTO (paid time off), sick leave, and 7 paid holidays. Company Info: Paladin Technologies is a premier North American complex systems integrator for building technology solutions, including IP security, alarms & monitoring, audio visual, low-voltage infrastructure, and networking. As a leader in the design, deployment, optimization, management, and maintenance of communication and digital networks, Paladin can meet the needs of clients on a national scale, while providing local support. Our team is the best in the industry, with manufacturer trained technicians, PMP-certified project managers, CTS- and RCDD-certified design engineers, coordinators, and administrative resources. Paladin has offices coast to coast across the United States and Canada, and nearly 1,700 talented and committed professionals dedicated to custom-crafting and installing technology solutions for clients requiring Integrated Security, Network Infrastructure, Audio Visual, Fiber Optics/OSP, Structured Cabling, and more. We are always at the forefront of the changing technology landscape, and through continued training, complex client projects, and company support, we provide our colleagues with exciting challenges and a rewarding career as Paladin continues to grow. This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Equal Opportunity Employer, including disability & veterans, or any other characteristic protected by law. If you need accommodation for any part of the application process, please send an email or call 1-855-296-3199 to speak with Human Resources and let us know the nature of your request. We thank you for your application, however only those selected for an interview will be contacted. Powered by JazzHR 3o2gh9H9gb

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description Allied Universal Technology Services® is hiring a Director of Revenue Operations. The Director of Revenue Operations will lead commercial planning, optimize sales processes, and drive operational excellence across our revenue-generating teams. The Director of Revenue Operations role is critical in aligning sales, marketing, and customer success to accelerate growth, improve forecasting, and enhance data integrity across systems. The Director of Revenue Operations will be located at our Allied Universal Technology Services headquarters in Dallas, TX and will report to our Senior Vice President of Sales. Why Join Us? * Be a key driver of strategic growth and operational excellence * Collaborate with senior leadership across sales, marketing, and finance * Influence high-impact decisions with data-driven insights RESPONSIBILITIES: • Commercial Planning: Lead annual planning cycles including customer segmentation, sales headcount modeling, territory design, quota allocation, and compensation strategy, • Strategic Sales Enablement: Partner with business and sales leadership to translate strategic goals into actionable sales initiatives, • Customer Relationship Management (CRM) and Data Integrity: Ensure high-quality and governance across Salesforce (SFDC), Configure, Price, Quote (CPQ), and other commercial platforms, • Performance Analytics: Build and manage dashboards to monitor Key Performance Indicators (KPIs) including pipeline health, conversion rates, and revenue metrics, • Process Optimization: Standardize and improve workflows across the commercial organization to drive efficiency and effective sales execution, • Bachelor's degree in business administration, marketing, or related field of study, • Minimum of five (5) years of experience in revenue operations, sales strategy, business operations, and/or sales leadership, • Proficiency in Customer Relationship Management (CRM); Configure, Price, Quote (CPQ); and Excel-based analytics, • Strong data analysis and reporting capabilities, • Excellent communication and executive presentation abilities, • Proven ability to collaborate cross-functionally and influence senior stakeholders, • Strategic thinking and problem-solving mindset, • Robust project management skills, • Strong experience in sales planning and revenue modeling, including headcount, territories, quotas, and compensation, • Master's degree (MBA or related field), • Project Management Professional (PMP) certification, • Medical, dental, vision, basic life, AD&D, retirement plan and disability insurance, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-JS Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1483826

Job Description The Service Manager is responsible for the delivery of service and sales of their assigned region. The role manages Service Technicians, sub-contractors, vendors, and customers. The position oversees all incoming repair requests and preventative maintenance jobs that the customer assigns. The role is responsible for scheduling, estimating, Service Technician management/training, and customer development. The Service Manager develops and maintains a relationship with the customer and ensures the quality of work and adherence to customer-specific Key Performance Indicators (“KPI”’s) are met. Cirks Construction Inc. (CCI), dba KDC Construction is a leader in the construction industry with diverse individuals dedicated to our people, customers, projects, and community. We are maintaining a strong focus on building a culture that encourages our employees to grow personally and professionally. KDC is also a proud recipient of the Top Workplaces 2022, 2023, and 2024, presented by the Orange County Register. Apply if you: • Bring a cooperative spirit to your team and neighboring department., • Have an understanding that through your contributions, you aid in the overall Company’s success., • Pursue continuous efforts to see beyond current business modes and methods., • Embody an understanding that as a committed team member, tenure with an organization is achievable. Synergy – bring a cooperative spirit to your team and neighboring departments. Marketing – understanding that through your contributions, you aid in the overall success of our Company. Innovation – continuous efforts to see beyond current business modes and methods. Longevity – understanding that tenure with the organization is achievable as a committed team member. Excellence – bring your whole self to work. Applying your knowledge, skills, and abilities ensures that every task you perform is performed at the highest level. Essential Job Functions • Oversee both field and office operations to ensure smooth and effective service delivery., • Manage employee performance, control labor and material costs, and ensure service levels meet or exceed customer expectations., • Responsible for managing a designated budget to meet financial expectations., • Ensures timely follow-up and resolution to work exceptions., • Ensures and validates the quality of work provided., • Ensures timely proposal submittals to customers., • Prepares estimates including time and materials to complete large scopes of work requiring return trips., • Conduct employee performance reviews, provide coaching, and foster professional development., • Ensures proper safety rules, regulations, and incident reporting are followed., • High school diploma or equivalent., • Strong technical knowledge and experience in General Building, Plumbing and Electrical trades., • Positive customer focus, always considering the impact on our customer and their customers., • Ability to interact with a diverse customer roster., • Carefully considers cost/benefits., • Strong written and verbal communication skills., • Demonstrates attention to detail, creative problem-solving, and analytical skills., • Able to deal with frequent change, delays, or unexpected events and communicate accordingly., • Supports the organization’s goals and values., • Look for ways to improve and promote quality., • Follow all Company and customer policies and procedures., • Possess the vehicle and tools required to perform job functions., • Proficient with computers and familiar with Microsoft Software Suite., • Medical insurance, • Dental HMO and PPO insurance, • Vision insurance, • Life/AD&D insurance, • Flexible Spending Accounts – Unreimbursed Medical and Dependent Care, • 401(k) retirement plan, • Vacation and Sick Time

Job Description At PEARCE, we've got a career for you! Join the nation's leading independent service provider for critical telecommunication and renewable energy infrastructure. We are the premier independent service provider for our nation's critical infrastructure. With over 2,500 team members nationwide, Pearce delivers comprehensive engineering, maintenance, repair, and repowering solutions, ensuring the seamless operation of our nation's wireless and wireline telecom, commercial and utility-scale solar and wind projects, EV charging stations, as well as large-scale power generation, critical power and energy storage assets. Your Impact: Pearce Services/ Unified Power is seeking a Senior Critical Power Field Technician (UPS Field Engineer) for Dallas, TX, and surrounding areas, with a commitment to excellence and a strong desire to succeed and learn new skills. As a Senior Critical Power Technician, you will directly support our customers in the onsite preventive, corrective, and restorative maintenance of their critical power systems (i.e., UPS, DC systems, inverters, PDUs, STS, and standalone reserve battery technologies). As a UPS Field Service Engineer for Unified Power, you will possess and utilize the 'hit-the-ground-running' and 'think-outside-the-box' mentalities that drive swift and superb solutions to address our customers' needs. Core Responsibilities: • Install electrical equipment such as small rack-mounted UPS equipment, various-sized batteries, and UPS/Battery monitoring equipment., • Maintain Battery Cabinets and racks, Maintenance Bypass, Battery Monitoring Equipment, DC Systems, and other electrical equipment., • Periodic and lifecycle-driven performance of remedial services, including failure analysis and troubleshooting, component replacements and repairs, and battery string replacements and installations., • Customer relationship building – Provide excellent customer service and upsell products., • Field troubleshooting calls from customers to a satisfactory resolution., • Quickly respond to critical situations., • Teach and mentor crew members on proper techniques for site work, troubleshooting, repair, and analyzing site data., • Isolate basic hardware, software, and interface malfunctions utilizing various test equipment on multiple products and technologies. ATTN: Only applicants with the following experience will be considered. Please ensure your resume clearly details your UPS work experience before applying. • Prior military training in electronics or avionics (A School, AIT, etc.) preferred., • Minimum of three (3) years serving in a third-party critical power field service or technical support role with a demonstrated progression in technical proficiency and capability -OR-, • Minimum of five (5) years serving in an OEM service environment in the critical power space., • Good understanding of AC/DC electrical principles., • Knowledge of test equipment operation, such as multi-meters and battery test equipment., • Read and interpret electronics schematics with the ability to troubleshoot failures/faults to the component level., • Understand and have experience enforcing compliance with FCC/FAA/EPA/OSHA regulations and standards., • Outstanding work ethic, punctuality, trustworthiness, and reliability – you will set the pace as a senior UPS/ Critical Power Engineer., • At Pearce, safety is our number one concern. Candidates must be able to comply with OSHA and applicable DOT Standards., • Must have a valid driver's license with an acceptable driving record (if driving a Company Vehicle) and pass a pre-employment drug screen., • Ability to lift and/or move up to 110 pounds for short durations., • Ability to kneel or crouch periodically., • Ability to stand for extended periods of time., • Ability to travel for multiple days with Per Diem as projects require., • Coordinate multiple tasks simultaneously while maintaining 100% safety awareness., • Lifting heavy objects and stretching above your head. #ZR At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$40—$50 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. At PEARCE, we are an equal opportunity employer dedicated to cultivating an inclusive environment that empowers employees to excel and make a meaningful impact, providing a dynamic space for field technicians, service specialists, and corporate professionals to flourish and propel their careers forward within our nationwide presence and expansive service offerings. Learn more about us at !

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description Allied Universal® is hiring a Vice President, Enterprise Application and Optimization. The Vice President, Enterprise Application and Optimization is a strategic and operational leader supporting Allied Universal Technology Services (AUTS), a growth business unit of Allied Universal. The Vice President is responsible for driving technology strategy and execution through partnering across sales, engineering, operations, and business intelligence teams. Additionally, this role will coordinate and chair cross-functional, corporate initiatives. The ideal candidate brings a strong background in application architecture, project management, and cross-functional collaboration in B2B or project-based services environments. • Onsite, in-office role Candidates must be local; relocation assistance is not provided RESPONSIBILITIES: • Strategic Leadership: Develop and execute a comprehensive business application strategy that aligns with AUTS's vision, including roadmaps for applications, data management, and best-in-class system integration. Support the company's ongoing AI-powered digital transformation initiatives that enhance business processes and customer experiences. Coordinate the company's strategic initiatives, ensuring there is a platform and approach to drive the management accountability and execution, • Application Management: Direct the development, deployment, and integration of business applications across the organization. Ensure applications meet high standards of quality, security, and performance, • Operational Execution: Lead and develop business intelligence platforms to ensure delivery of accurate, actionable reporting and performance analytics. Partner with Finance, Sales, and Operations to drive margin optimization, resource utilization, and continuous performance improvement. Champion a culture of data transparency, real-time reporting, and insight-led data throughout the business. Identify opportunities for automation and systems integration, • Innovation: Foster a culture of innovation. Stay abreast of emerging technologies and industry trends to identify opportunities for advancement and competitive differentiation, • Risk Management and Compliance: Ensure applications and architecture adhere to legal, regulatory, and security standards, • Team Leadership and Development: Lead, mentor, and develop a high-performing team. Promote a culture of excellence, collaboration, and continuous improvement. Manage talent acquisition and development strategies to build and retain a skilled workforce, • Stakeholder Engagement: Work closely with business leaders to understand their needs and ensure the business applications deliver value. Communicate effectively with stakeholders at all levels, translating complex technical concepts into business terms, • Bachelor's degree in computer science, information technology or a related field, • Minimum of ten (10) years of experience in a senior leadership role overseeing applications strategy, architecture, management, configuration and development, • Experience with the following:, • Managing operating and capital budgets, • Overseeing and supporting SAP environments, • Managing onshore third-party VARs for ERP (SAP) support, • Operating in a matrix-based management organizational environment with both field and back-office stakeholders, • Project-based revenue models or recurring monthly revenue and subscription-based contracts, • Hands-on project management and leadership of company-wide multi-functional initiatives, • Regulatory governance requirements in a SOX-based environment, • Proven track record of developing and implementing strategies that have delivered significant business value, • SAAS and cloud-based environments, • Knowledge of CRM, CPQ, ERP/SAP, engineering design, and Business Intelligence systems (e.g., SAP, Salesforce, ServiceNow, WeEstimate, Domo, Tableau, or similar), • Deep understanding of application development methodologies and cloud computing, • Strong leadership and team-building skills, with the ability to motivate and inspire a diverse team, • Experience in SAP ByDesign (BYD), SAP ECC, SAP S/4 HANA, • Experience in Microsoft Office 365, MS Power Automate and other MS Tools, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's retirement SIP plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal days, • Executive flex vacation plan #LI-BL Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1468814

Job DescriptionDescription: Trescal is a growing company, looking for new talent to join our organization! We are the premier independent calibration, repair, and asset services provider in the U.S. We provide our customers single-source, cost-effective, best-in-class solutions.\ Our team is comprised of talented professionals who excel at providing industry leading calibration, repair and asset management services to our customers. As an employee at Trescal, you will join a people-centric company with an incredible culture. We encourage new ideas and suggestions in order to continue to offer both customers and employees the services and benefits in a dynamic, global marketplace. We value teamwork, integrity, quality, innovation, and dynamic engagement. Does Trescal sound like the place for you? Then join our team! Description This calibration technician is required to perform calibrations on medium to high level test and measurement instrumentation and assist in general laboratory duties as assigned. This person should be able to troubleshoot and repair simple malfunctions. The technician must be self-motivated and rarely requires guidance from other personnel in the measurements it is proficient. Collateral duties may be assigned as a permanent part of the position description depending on individual’s abilities. RESPONSIBILITIES: • Adhere to all company policies and procedures, • Ensure customer satisfaction and timely turn-around on all equipment and service, • Perform calibration of medium to high level test and measurement equipment with little supervision, • Coordinate and lead teams for field calibration and maintenance, • Seek and provide sales leads whenever possible, • Create and may be called upon to verify calibration data sheets for technical content and accuracy based upon instrument specifications and approved calibration procedures, • Develop calibration procedures to meet the needs of the customer while supporting traceability of the measurements, • Complete all documentation associated with position accurately and efficiently while maintaining a 5 % or less of the combined Quality Documentation Inspection (QDI) and Process Verification Inspection (PVI) discrepancy rates, • Maintain technical proficiency and effectiveness through various means such as self-study, local college and internal training programs as well as through proficiency testing, • Perform other laboratory support functions as required in an efficient and orderly manner, • May assist the Laboratory Manager in training technicians and educating customers when needed, • May assist Quality Assurance in developing uncertainty budgets, • Ensure that preventative maintenance of the laboratory’s equipment is performed in a timely and acceptable manner, • Performing daily inspections of the incoming equipment to verify: accessories and manuals are available, malfunctions of customer instrumentation, and to change equipment status when appropriateRequirements:, • Military (PMEL) experience or two years of a technical associates degree, • Minimum of 2 years of commercial or military laboratory experience, • Basic knowledge of metrology practices and theories, analog and digital circuit analysis, • Experienced in calibrating several disciplines of test and measurement equipment used in conjunction with the repair and calibration of electronic, mechanical, acoustical, chemical, thermal and/or dimensional devices, • Possess basic troubleshooting and repair capabilities, and the ability to work on unique equipment with product information, • Proficient in Windows-based and laboratory automation software, • Ability to evaluate appropriate standards and scope of accreditation to determine if these tools are acceptable for calibrating M&TE,, • Working knowledge of ISO/IEC 17025 and ANSI/NCSL Z540-1 requirements, • Experienced in calibrating several disciplines of test and measurement equipment such as: -Physical -Dimensional -Electronics -Temperature -Pressure, • Strong communication skills including written, verbal and listening skills., • Proficient computers skills including but not limited to Microsoft Office (Word & Excel), Internet Research and Database management., • Skilled in communication with customers and peers, including the ability to mentor and train., • Dental, • Vision, • Employee Assistance Program, • Basic Life/AD&D Insurance, • Long Term Disability Insurance #INDTUS

Job Description Would you like to work with an interactive, family-owned & managed company and be home on Sundays with your family? We offer that, paid time off, and more. The Company: Univesco, Inc. is a Dallas-based property management company that has been in the industry for over 40 years, managing over 4,000 apartment units across Texas and in Florida. The Position: We are seeking an experienced and thorough Service Technician to join our maintenance team, who will perform repairs to the community and apartment homes in accordance with company standards, including HVAC, carpentry, electrical, painting, and plumbing work. The successful candidate will adhere to company policies and procedures, safety standards, and other Federal and State laws. The ideal candidate will have at least 3 years of current proven experience in multi-family property maintenance or a relevant field, have a valid HVAC certification, be able to work independently, have excellent time management skills with an ability to prioritize tasks, show attention to detail, and have a working knowledge of the English language. The Location: Garden Park Apartments | 3565 Portland, Irving, TX Why Should You Apply? ● Generous pay. ● Home most nights and weekends. ● Paid time off, medical, and 401K benefits. ● Opportunities for growth & advancement. Interested? Please respond to the ad or apply in person at the location above. Company DescriptionUnivesco, Inc. is a Dallas-based property management company that has been in the industry for over 40 years.Univesco, Inc. is a Dallas-based property management company that has been in the industry for over 40 years.

Job Description Pharmacy Technician Instructor Day/Evening shifts 8am - 4:30pm, 6pm -10pm Mon- Fri Summary: An instructor facilitates meaningful learning of the course competencies in the curriculum and proactively supports all facets of the learning environment. S/He provides education through excellence in learning-centered instruction that will enable graduates to fulfill the evolving needs of the marketplace. S/He encourages a culture of learning that values mutual responsibility and respect, life-long learning and ethics as well as personal and professional development. Key Job Elements: Provides competency-based education which aligns with the CHCP model of curricula as well as supports the CHCP style of system delivery. • Designs and delivers excellence of class instruction for both residential and blended delivery through the development of instructional plans to meet course competencies, the development of activities which support lesson objectives, and delivers the instruction as approved., • Enables the achievement of pre-described exit competencies for student achievement and evaluation of learning by providing instruction which fosters competencies and establishes student performance criteria and evaluation., • Delivers excellence in learning-centered instruction by establishing an online blended and classroom environment conducive to learning and student involvement as well as effectively planning and preparing for classes and student success., • Provides weekly feedback to students, taking special care to provide comprehensive feedback at the conclusion of the mid-term mark, providing struggling students with opportunities to improve., • Promotes student success by showing flexibility in style and work schedule as well as exhibiting a passion for teaching and students and engaging students in the learning process., • Manages the learning environment through keeping accurate records, taking attendance, submitting grades and other reports on time, and enforcing school/campus academic and attendance policies., • Attends a majority of general faculty, departmental, and school-wide meetings., • Contributes service to the campus by actively participating on at least one special project committee each year., • Relates professional/life/industry experience to learning by the continuation of professional/technical skills development, the introduction of industry perspective into courses, and the active awareness of professional/industry trends and opportunities., • Answers questions related to program content that may impact curriculum and delivery of objectives for courses. Also attends Program Advisory Committee meetings one a year to the program for which the expertise is appropriate., • Current Registration with Texas State Board of Pharmacy or National Pharmacy Tech Certification with PTCB or NHA, • 4 years of in-field experience, • 2+ years in hospital and sterile compounding ACPE IV/Sterile Compounding Certification. Preferred:, • Graduate of pharmacy tech program, teaching experience a plus but not required.

Job Description Position Summary We are seeking a skilled and hands-on Mitigation Lead Technician to manage and execute emergency restoration projects for both residential and commercial properties. This role requires strong field leadership, technical expertise in mitigation procedures, and a commitment to quality, safety, and customer satisfaction. Key Responsibilities • Lead mitigation projects involving water, fire, mold, and biohazard damage from initial response through completion, • Supervise and train field technicians on equipment usage, safety protocols, and industry-standard restoration techniques, • Monitor job progress, perform moisture readings, and adjust drying strategies in accordance with IICRC standards, • Set up containment, perform demolition, and maintain clean, organized, and safe job sites, • Operate and maintain restoration equipment, including dehumidifiers, air movers, HEPA filtration units, and injectidry systems, • Document job conditions and progress using restoration software platforms (e.g., MICA, DASH, Encircle), • Communicate professionally with clients, insurance adjusters, and internal teams to ensure clarity and satisfaction, • Maintain a well-stocked and organized vehicle, ensuring all tools and equipment are operational and ready, • Follow all safety protocols, including proper PPE usage and adherence to company and industry guidelines, • Minimum of 2 years’ experience in mitigation or restoration (residential and/or commercial), • IICRC Water Restoration Technician (WRT) certification required; additional certifications (ASD, AMRT, FSRT) are a plus, • Proficient with moisture detection tools and structural drying equipment, • Demonstrated leadership ability or strong interest in team leadership, • Excellent communication and customer service skills, • Physically capable of lifting 50+ lbs and working in demanding environments, • Valid driver’s license with a clean driving record, • Willingness to work flexible hours, including evenings, weekends, and on-call shifts

Job DescriptionThompson Law’s vision is to be the law firm of choice for every person injured or killed due to preventable tragedy while providing our clients world-class service and record-setting results. We have built a spectacular team that delivers on those ideals, driving incredible growth and opportunity. Thompson Law, a nationally growing personal injury firm based in the Oak Lawn area of Dallas, seeks a Paralegal to join our Case Management team! The Position: This role will be crucial in coordinating medical treatment for our clients who have suffered personal injuries, ensuring they receive timely and appropriate medical care throughout their cases. What is expected of you: • Empathy: You must be able to convey empathy and compassion at all times., • Patience: Understanding that it will be 1+ years before intermediate knowledge of position responsibilities is adequately acquired., • Compliant: Willingness to learn our process and excel within it without question., • Self-Reliance: Consistently demonstrate the ability to progress independently., • Independently manage treatment in personal injury cases., • Collaborate with attorneys, clients, and insurance adjusters., • Communicate with clients, medical providers, insurance companies, and other parties to obtain necessary medical information., • Monitor and track clients' medical treatment progress and appointments, coordinating and scheduling as necessary., • Review and organize medical records, bills, and other relevant documentation., • Maintained detailed case management records and conducted legal research as needed., • Stay updated on changes in medical treatment protocols, healthcare regulations, and industry best practices., • 4+ years performing administrative work at a law firm, medical office, or insurance environment., • Environment., • Excellent attention to detail, strong organizational skills, and the ability to manage multiple tasks effectively., • Strong verbal and written communication skills and the ability to interact effectively with various parties., • Proficient administrative skills and ability to use legal case management software and Microsoft Office products (Teams, Outlook, Excel, etc.), • Willingness to learn and understand medical terminology, procedures, and billing practices., • Demonstrated ability to work independently and collaboratively in a fast-paced environment., • 3+ years of experience in a law firm with personal injury experience or an injury-related field (e.g., emergency medical technician (EMT), nurse practitioner, insurance adjuster)., • Salary + Bonus, • Employee Health Insurance premium 100% paid by the firm, • Dental & Vision, • FSA/HSA, • Generous paid time off and paid holidays, • 401(k) with employer matching, • Basic life insurance 100% paid by the firm, • Monday to Friday work schedule with no weekends If you're ready to contribute your talents as part of one of Texas's fastest-growing personal injury firms while enhancing your skills within a dynamic environment—apply today! Powered by JazzHR XVRBSKZ02R

Job DescriptionJoin the HomePro Team as an Security Install Technician Step into the world of cutting-edge home technology and help families feel safe every day! At HomePro, we’re growing our security system installation team and looking for enthusiastic individuals eager to learn and succeed. If you are passionate about technology, love solving problems, and thrive in a customer-focused setting, we want to meet you! Security Installation Technician Job Overview As a security Install Technician, you'll receive hands-on training to install, program, and troubleshoot security and alarm systems in newly built and existing homes. This is your chance to develop a rewarding technical skillset, grow your career, and help protect what matters most to our customers. Key Responsibilities for Security Install Technician Careers • Perform new installations of home security systems and devices in residential properties, • Program security systems for integration with central monitoring stations, • Test and verify all installed devices ensure they are operating safely and reliably, • Educate homeowners on effective system operation and best use practices, • Support retrofitting of new wires and integration with existing home systems, • Maintain accurate records of truck inventory, tools, and parts, • Resolve routine operational challenges for builder clients during installation or maintenance, • Install and configure popular security brands including Honeywell, DSC, Alarm.com, GE, and QOLSYS, • Work with CAT5 and RG6 cabling (installation, termination, and retrofitting), • Assist with installation of central vacuum and M&S/OnQ intercom systems as needed, • Collaborate with manager for additional projects and tasks as assignedQualifications for Security System Technician Jobs, • High school diploma or equivalent required, • 1+ years of experience in electronics, construction, cable installation, or a related field preferred (but not required), • Familiarity with home security systems (Honeywell, DSC, Alarm.com, GE, QOLSYS) is a plus, • Residential homebuilding experience is advantageous, • Physical ability to access attics, work on ladders, and transport equipment, • Strong problem-solving, organization, and self-motivation skills, • Excellent verbal and written communication; bilingual skills are highly desirable, • Valid driver’s license and clean driving record requiredSecurity Installer Skills & Attributes, • Strong customer service orientation—always focused on delivering a positive experience, • Capable of juggling multiple priorities while maintaining high-quality work, • Team player, but comfortable working independently with minimal supervision, • Reliable, punctual, and eager to learn new systems and technologiesWhy HomePro? Benefits for Security Install Technician Careers, • Competitive hourly pay and overtime opportunities, • Medical, dental, and vision insurance, • Retirement savings plan options, • Paid holidays and time off, • Clear path for career advancement and industry certifications Apply now to launch your Security Install Technician career with HomePro!

Job Description Control Panels USA is seeking an experienced Field Controls Technician to join our growing team. In general, the Field Controls Technician is responsible for complete commissioning of hardware at customer sites including wire terminations, instrument configurations, radio/antenna installation/ alignments and general panel troubleshooting for project field work or service calls. The Field Controls Technician will utilize various hand and electric tools, analytical testing equipment and computer supported software. This role will be located at our Dallas office but have some flexibility to work in Central Texas area when needed a week at a time as needed. Who we are: Control Panels USA is a manufacturer of Control Panels and Relay Rack assemblies in a wide range of industries. We offer custom design and fabrication for OEM clients, contractors, and end users requiring either large or small production runs. Our factory in Austin, Texas houses state of the art engineering, manufacturing, and testing capabilities. This allows us to supply our customers with cost effective solutions while maintaining very competitive lead times. We strive to exceed our customer’s expectations while providing the highest quality products and services to our clients in the most cost- efficient manner. Why CP USA? Join our amazing team! Here’s what some of our employees have to say about CP USA: • Have always enjoyed working for CP USA. This is truly the best working environment I’ve ever worked in., • CP USA does an amazing job of making their employees feel appreciated. They also do great at recognizing strengths and giving people the opportunity to grow., • 100% employer paid medical, dental and vision insurance for our employees, • 401(k) with 50% matching, • Paid time off, • Reward & Recognition Bonus Program, • Quarterly company events Responsibilities include: • Review assigned scope of work with project manager prior to working in the field, • Coordinate and implement any training required for the project with the Project Manager, • Safety, • Instrumentation, • Controls, • Site specifics / other onsite training, • Ensure the following information has been gathered PRIOR to heading to the site, • Product Literature, • Material, • Clarification of Specification, etc., • Utilize template documents on all assigned tasks, • Parameter List, • Testing Documentation, • Calibration Documentation, • Daily Reports, • Time Sheet, • Credit Card Reconciliation, • Update panel schematics for CAD Designer to generate As-Built drawings, • Generate service tickets and daily reports, • Coordinate with Project Manager on assigned service calls for Invoicing, • Maintain Field tools and Test Equipment, • Maintain good relationship with customers, • Great communication skills, both verbal and written, • Ability to multi-task and prioritize in a high-pressure environment, • Intermediate computer skills and comfortability with Word, Excel, Outlook, etc., • Ability to pass CP USA’s Basic Electrical and Controls Theory, • Operational knowledge of multimeter functions, pressure calibrators, process meters, soldering wires, connectors., • Experience in the theory, application and calibration of flow, pressure, level, and temperature instrumentation., • Experience in troubleshooting complex relay logic using drawings and knowledge of motor/valve control logic., • Experience in wiring and troubleshooting loop powered and isolated 4-20mA analog control systems., • Must be able to work at elevated heights, including the use of ladders, • Great problem-solving skills, • Clean driving record, • Ability for overnight travel approximately 25% of the time, • Have flexibility to travel to Central Texas area for jobs a week at a time as needed., • Experience with commissioning program logic controller (PLC) software a plus, • Familiarity with wastewater and water treatment controls a plus, • Familiarity with radio/cellular telemetry systems a plus. While performing the duties of this job, the employee is regularly required to talk, hear, use hands and fingers, reach with hands and arms, drive, sit, stoop, climb, and stand. The employee must frequently lift and/or move up to 50 pounds and be willing to work in both indoor and outdoor conditions. Other Requirements: • Valid driver license, • Successful completion MVR check, • Industrial automation, • Municipal utilities Powered by JazzHR i49QuDy9NR

Job DescriptionCompany Description Fairmont Dallas, located in the Arts District of downtown Dallas, offers 545 elegant guestrooms and suites, with over 73,000 square feet of flexible meeting space. For over 50 years, Fairmont Dallas has been the setting for countless civic, social cultural, convention and corporate events, setting the stage for countless memories. Job Description Focused on all areas of technology services with a key focus on hardware, operating systems and security. This role requires proficiency in all aspects of Technology, from network infrastructure maintenance and deployment to user ticket resolutions and assistance to hotel employees, while ensuring adherence to standards required by corporate policies. • Consistently offers professional, engaging and friendly service, • Coordinate, manage and ensure that all daily hotel user service technology tickets are dealt with on a timely and accurate basis, including 3rd party SLA support, • Assist in the integration of hotel hardware and software technology, • Maintain compliance with technology standards and follow risk management practices following applicable policies and procedures outlined in the company standard Policies and Procedures, • Provide a high level of operational stability for property-based technology, • Maintain IT Systems disaster recovery and Daily Backup Logs, • Track and maintain all employee workstations, laptops and peripherals, ensuring compliance with the standard, using the Accor imaging process, with an emphasis on anticipating employee needs, • Maintain Daily Wi-Fi Log update - Maintain all Guest and Back of House Wi-Fi equipment in Public Areas, Meeting Space and Guestrooms, • Review Anti-virus logs and resolve any enterprise issues, • Maintain inventory of all I/T equipment and peripherals, network architecture and software, • Maintain IDF and MDF’s as per ACCOR Standards, • Ensure a consistent PCI compliant environment and complete annual PCI compliance reporting, • Responsible for the I/T Budget, Forecast, Financial Reporting, and checkbook management, • Source vendors for best price, quality, alignment with corporate specifications and process payment, • Oversee and manage mobile devices, including company owned and BYOD integration, • Manage technical aspects of reader boards and In-room TV system. Coordinate service and replacements with functional champions and POMEC, • Oversee and manage the phone system, • Provide technical support for locally managed systems and corporate approved applications, including but not limited to interfaces, the PMS and collateral systems, F&B systems (POS, Mini Bars, devices, etc.) and financial management systems and devices, • Seek out and deploy technological initiatives to improve efficiency, increase profit and drive guest satisfaction, • Develop the annual technology capital plan with Accor and local input, based on needs assessment. Implement projects in accordance with the approved capital budget and outlined in a critical path, • Willing to work a flexible schedule in order to accomplish all major and critical responsibilities and tasks, including after-hours support, • Coordinate out of office coverage and maintain local functional champion support list, • Onsite Fairmont Dallas office space is primary workstation, • Other duties and responsibilities as assignedQualifications, • University/College Degree or a relevant field of work, or an equivalent combination of education and work-related experience, • 2+ years progressive work-related experience in multiple areas of Technology and previous hotel experience is an asset, • A+ Certification, • Microsoft Certified System Engineer preferred, • Cisco certification or equivalent experience preferred, • Entry level Network Technician certification, • Entry level Microsoft certification, • Understanding of hotel operations, • Good verbal & written communication skills, • Strong interpersonal skills, • Self-starter with a strong sense of commitment Additional Information What’s in it for you: • Paid time off, • Medical, Dental and Vision Insurance, 401K, • Complimentary Shift Meal, • Employee benefit card offering discounted rates in Accor worldwide, • Learning programs through our Academy designed to sharpen your skills, • Ability to make a difference through our Corporate Social Responsibility activities, such as Planet 21, • Career development opportunities with national and international promotion opportunities

Job Description Overview: We are seeking a skilled Controls Technician to join our team. This position is responsible for installing, maintaining, and troubleshooting automation and control systems, primarily within commercial HVAC and building automation environments. Key Responsibilities: • Install, commission, and maintain building automation and HVAC control systems., • Program and configure controllers, sensors, and field devices for optimal system performance., • Calibrate instruments, sensors, and control components to ensure accurate operation., • Diagnose and repair system faults using electrical diagrams, schematics, and technical documentation., • Ensure all work meets company, industry, and safety standards., • Strong background in electrical and mechanical systems., • Proficiency in reading and interpreting wiring diagrams, schematics, and control drawings., • Experience with HVAC systems, building automation, or related control systems., • Working knowledge of control programming, network communications, and device integration., • Relevant certifications., • Ability to work independently, manage multiple tasks, and maintain attention to detail.

Job DescriptionSalary: $65/HR - $75/HR Location:Remote / Travel as Required Employment Type:Full-Time | Consulting Engagement Position Summary: Morris Technology Solutionsis seeking an experiencedOracle HealthLaboratory LIS Consultant to support our healthcare clients with expert advisory, implementation, and system maintenance services. This role centers on the Oracle Health General Laboratory, Microbiology, Blood Bank and Anatomic Pathologystaff augmentation. The successful candidate will bring deep expertise in laboratory information systems, strong technical problem-solving skills, and the ability to operate effectively within complex, multi-hub healthcare environments. Key Responsibilities: • Provide expert consulting services forOracle Health General Laboratory, Microbiology, Blood Bank and Anatomic Pathologysolutions across client engagements., • Perform system maintenance, troubleshooting, configuration updates, and optimizations to ensure reliable laboratory operations., • Lead and coordinateChange Managementactivities, including assessing impacts, facilitating communication, and ensuring successful system updates., • Work closely with client stakeholders to evaluate, document, and implement system build change requests., • Own and manage theServiceNowrequest lifecycle, ensuring accurate tracking and resolution of all client-reported issues and change requests., • Support clients operating withinmulti-hub healthcare environments, providing guidance on system performance, scalability, and integration., • Deliver strategic recommendations to clients based on Oracle Health best practices and evolving product capabilities., • Collaborate with Morris Technology Solutions internal teams to ensure consistent, high-quality service delivery across all projects. Required Qualifications: • 5 to 10 yearsof experience supporting and/or implementingOracle Health General Laboratory, Microbiology, Blood Bank and Anatomic Pathology., • Demonstrated experience operating withinmulti-hub healthcare system environments., • Bachelors degree in healthcare, laboratory science, IT, or related field OR minimum10 years of healthcare industry experience., • Strong understanding of laboratory workflows, LIS configuration, and operational support., • Experience withServiceNowor comparable ITSM platforms for request management., • Excellent communication skills, with the ability to interact effectively with both technical teams and clinical stakeholders., • Self-starter with the ability to work independently in a fast-paced, client-facing consulting environment. Preferred Qualifications: • MT (Medical Technologist)orMLT (Medical Laboratory Technician)certification., • Familiarity with healthcare regulatory requirements impacting laboratory and blood bank operations., • Previous consulting experience within healthcare technology or laboratory information systems., • Knowledge of Oracle Health product developments, roadmap, and system integration considerations.

Job DescriptionSalary: $22-$26 Hourly About Big Bear Restoration At Big Bear Restoration, we are a trusted team of restoration professionals committed to helping homes and businesses recover from water, fire, mold, and environmental damage. With a focus on craftsmanship, compassion, and customer satisfaction, we provide reliable emergency response services and expert restoration solutions throughout the community. Position Summary We are seeking a hands-on Mitigation Lead Technician to oversee and execute mitigation and emergency restoration projects for residential and commercial properties. This position involves direct leadership in the field, technical execution of restoration procedures, and responsibility for quality, safety, and customer satisfaction. Key Responsibilities • Lead and manage mitigation jobs involving water, fire, mold, and biohazard damage from start to finish., • Train and oversee technicians in equipment operation, safety, and proper restoration techniques., • Monitor job progress, take moisture readings, and adjust strategies based on IICRC standards., • Set up containment zones, perform demolition, and maintain a clean and safe job site., • Operate and maintain restoration equipment, including dehumidifiers, air movers, HEPA filters, and injectidry systems., • Document job conditions, moisture levels, and work progress using company systems (e.g., MICA, DASH, Encircle)., • Communicate professionally with customers, insurance adjusters, and internal team members., • Maintain a stocked and organized company vehicle and ensure all equipment is ready for use., • Adhere to safety protocols, proper PPE use, and company policies at all times., • Participate in an on-call rotation and respond to emergencies as needed. Qualifications • Minimum 2 years of experience in mitigation or restoration (residential and/or commercial)., • WRT certification required; additional certifications (ASD, AMRT, FSRT) are highly valued., • Proficient in using moisture detection tools and structural drying equipment., • Proven ability to lead a team or strong interest in growing into a leadership role., • Excellent customer service and communication skills., • Physically fit and able to lift 50+ lbs, due to demanding work environments and dynamics., • Valid drivers license and clean driving record., • Willingness to work flexible hours, including evenings and weekends.

Job Description COMPANY OVERVIEW: CERTERRA (formerly RMA Companies) is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, CERTERRA has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. Job Summary: Certerra is a growing national provider of engineering, testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. At Certerra, we engineer solutions for completed construction projects. Bringing together specialized testing, inspection, and certification capabilities, we combine innovation with practical knowledge to ensure our communities are built to last. With a nationwide office network and an expert team of over 1,800 people[LB1] , we have the resources to deliver materially better outcomes. The Lab Technician or Lab Manager role will be working out of our Hawaii division in Honolulu, Hawaii. Job Summary: Certerra is actively seeking a knowledgeable and driven Laboratory Manager to lead operations within our Geotechnical and Construction Materials Testing Laboratory based in Dallas, Texas. This leadership role calls for a well rounded professional with hands-on experience in geotechnical, soil, rock, asphalt, and concrete testing, as well as laboratory equipment maintenance, calibration, and safety management. The Lab Manager will be responsible for overseeing daily lab functions, managing personnel, and upholding our commitment to delivering accurate, high-quality test data to support diverse infrastructure and construction projects. This is a rewarding opportunity to play a pivotal role in complex, high-profile projects while working alongside a dedicated, experienced technical team. Duties/Responsibilities: • Lead and manage the daily operations of the geotechnical and material testing lab, including scheduling, personnel oversight, and workflow coordination., • Develop and enforce lab operating procedures, safety protocols, and quality assurance programs to maintain test accuracy and reliability., • Plan, perform, and supervise geotechnical and materials testing services including but not limited to soil classification, compaction, permeability, shear strength, consolidation testing, asphalt, concrete and mortar testing., • Review, analyze, and interpret laboratory data, preparing technical reports with detailed findings and recommendations., • Evaluates the performance of all employees within the laboratory and assists them in their professional development and growth, consistent with company policies and procedures., • Supervises the efficient utilization of facilities and equipment assigned to the laboratory and makes requests for additional equipment and facilities as needed to meet the client’s demands., • Oversees the proper organization and appearance of the laboratory area, including keeping the area and equipment clean and uncluttered., • Ensures that laboratory personnel follow company administrative policies. Examples of such policies include, but are not limited to, time sheets, expense reports and purchase order requirements., • With the assistance from the Materials and/or Geotechnical Department Manager, plans, recruits, selects and provides training for personnel in the department., • May be required to perform construction and geotechnical related laboratory testing based on workload and staffing., • Ensure proper maintenance, calibration, and safe operation of all laboratory instruments and testing equipment., • Work collaboratively with project managers, field technicians, and clients to provide technical support and solutions throughout project execution., • Remain current on emerging industry standards, regulatory updates, and advancements in laboratory practices. Education/Qualifications:, • Bachelor’s degree in engineering technology or related field and 5 years’ experience performing laboratory tests on construction and geotechnical materials. Or, in lieu of a degree, a minimum of 8 years’ related experience.

Job Description OUR COMPANY: EOS IT Solutions is a Global Technology and Logistics company, providing Collaboration and Business IT Support services to some of the world's largest industry leaders, delivering forward-thinking solutions based on multi-domain architecture. Customer satisfaction and commitment to superior quality of service are our top business priorities, along with investing in and supporting our partners and employees. We are a true International IT provider and are proud to deliver our services through global simplicity with trusted transparency. WHAT YOU WILL DO: As a Fiber Optical Splicing Technician, you will be responsible for the installation, splicing, testing, troubleshooting, and maintenance of fiber optic cabling infrastructure. This hybrid role combines the practical skills of an Intermediate Technician with the advanced expertise and leadership qualities of an Expert/Lead Technician. You will work within mission-critical environments, ensuring precision, documentation accuracy, and adherence to safety and quality standards. This role involves extensive travel to client sites for fiber optic splicing and related fieldwork. Candidates must be comfortable working in various environments and traveling regularly. This role requires 90% travel. Must be located near a major airport. KEY RESPONSIBILITIES: • Perform fusion and mechanical splicing of single-mode and multi-mode fibers, including ribbon fiber splicing., • Prepare and terminate fiber optic cables using industry-standard methods and tools., • Install and manage fiber in various environments including ODFs, splice trays, enclosures, and patch panels., • Conduct cable preparation including stripping, cleaving, cleaning, and protection of fibers., • Label and route fiber in compliance with documentation and design standards., • Use advanced test equipment (OTDR, OLTS, power meters, visual fault locators) to certify and troubleshoot fiber links., • Perform end-to-end testing including insertion loss, return loss, and reflectance measurements., • Analyze OTDR traces to identify faults, splices, and connector losses., • Produce detailed test results, reports, and documentation for client acceptance and compliance verification., • Diagnose and repair faults in fiber optic networks, including complex and escalated issues., • Perform root cause analysis and implement corrective actions to prevent recurrence., • Respond to service outages and perform emergency repairs with minimal disruption to live traffic., • Execute high-count and ribbon fiber splicing projects, including mass fusion splicing., • Manage fiber assignments, routing, and labeling in large-scale installations., • Support fiber network expansion, migration, and reconfiguration projects with minimal service interruption., • Maintain detailed records of splicing, testing, and repair activities., • Ensure all work complies with industry standards (e.g. ITU-T, FOA, BICSI, TIA/EIA, NEC), safety regulations, and company policies., • Participate in quality audits and ensure compliance with both company and client operational standards., • Minimum 3–5 years' hands-on experience in fiber optic splicing, testing, and installation (Tier 2 or Tier 3 level)., • Deep understanding of optical fiber theory, attenuation, dispersion, and signal integrity., • Proficiency with high-precision fusion splicers (e.g., Fujikura, Sumitomo, or INNO)., • Skilled in interpreting fiber network design drawings, splice schematics, and optical budgets., • Experience working with both inside plant (ISP) and outside plant (OSP) environments., • Advanced use of OTDRs, light source/power meters, visual inspection scopes, and fiber identifiers., • Ability to interpret and troubleshoot complex OTDR traces and reflectometry data., • Knowledge of fiber characterization testing, DWDM/CWDM network considerations, and loss budgets., • Comfortable working within data center environments, including hot/cold aisles and structured cabling systems., • Understanding of cable management best practices, rack layouts, and physical infrastructure documentation., • Experience working in live network environments with strict uptime SLAs., • In-depth knowledge of safety standards for fiber optic work, including laser safety and confined space awareness., • Familiarity with environmental and electrical regulations (OSHA, NEC, and local standards)., • Consistent track record of adhering to quality assurance processes and precision workmanship., • Strong communication and interpersonal skills to collaborate with engineers, project managers, and clients., • Demonstrated leadership in mentoring junior technicians or overseeing small project teams., • Excellent time management, prioritization, and multitasking abilities under tight deadlines., • Analytical mindset with strong attention to detail and commitment to accuracy., • Proactive and self-motivated, with the ability to work independently in remote or field conditions., • Proficiency with digital documentation tools, fiber management software, and reporting systems., • Competent with Microsoft Office Suite, Google Workspace, or equivalent documentation platforms., • FOA CFOT, CFOS/T, or BICSI certifications (or equivalent regional qualification)., • Manufacturer training/certification (e.g., Corning, CommScope, or AFL)., • Experience in hyperscale or enterprise data center environments., • Project leadership or supervisory experience within a technical team. At EOS IT Solutions, we are committed to supporting the well-being and success of our team. Our comprehensive benefits package includes: • Health, Vision, and Dental Insurance starting the 1st of the month after your start date., • Travel pay: Compensation provided for any work-related travel outside of your assigned local area, in accordance with EOS travel policy, • Occasional overtime and bonus opportunities for hourly workers, • 10 Days of Paid Time Off (PTO) annually, • 12 Paid Holidays, • 6 Sick Days (available after 90 days of employment) EOS is committed to creating a diverse and inclusive work environment and is proud to be an equal opportunity employer. We invite you to consider opportunities at EOS regardless of your gender; gender identity; gender reassignment; age; religious or similar philosophical belief; race; national origin; political opinion; sexual orientation; disability; marital or civil partnership status or other non-merit factor. #FIBEROPTIC Pay Range$25.48—$32.69 USD

Job Description PHASOR Engineering Inc. is a dynamic Alberta based company specializing in engineering, design, and testing / commissioning of medium to high voltage electrical facilities. Focused on providing the most cost-effective and efficient solutions to power system engineering, we are involved in a diverse range of projects from preliminary engineering through to the commissioning and startup. We are currently seeking a highly motivated Lead Commissioning Engineer / Commissioning Manager join our field services team on a full-time basis. If you are an excellent communicator and skilled problem-solver with strong attention to detail, we offer a dynamic work environment where you will be continuously challenged in all aspects of the testing and commissioning process. As a condition of employment, successful applicants agrees to undergo a Backcheck screening, which includes identity verification and a criminal background check. Responsibilities: • Leading a team in the testing and commissioning of power system protection & control schemes in the utility, power generation, and oil & gas industry., • Read and interpret drawings and troubleshoot / resolve technical issues., • Manage direct reports and delegate tasks as needed., • Report preparation and submission., • Assist with generation of commissioning startup procedures or work instructions., • Ensure compliance with all safety practices as per corporate, client, and industry standards., • The successful candidate should possess a Bachelor's Degree in Electrical Engineering, Power Systems Electrician Journeyman Ticket, or an Electrical Engineering Technologist Diploma from a recognized institute., • 4+ years experience leading a commissioning team in the electrical utilities industry., • Strong interpersonal and communication skills and an extreme attention to detail are essential., • Knowledge of the Microsoft office software suite of programs coupled with strong computer skills., • Excellent organizational skills and ability to manage a wide variety of issues simultaneously., • Strong analytical, risk assessment and problem solving skills., • Ability to work for extended periods out of town., • Valid driver's license with clean driving record., • Must be legally able to work in Canada, VISA Sponsorship is not available for this position., • Valid driver’s license with clean driving record., • Typical shifts will range from 4/3, 8/6, 10/4, and 14/7., • Working hours are generally from 7am - 5:30pm at 10hrs/day. Other names for these roles include: Commissioning Technologist, Commissioning Engineer, Commissioning Lead, Commissioning Specialist, Commissioning Manager, Field Service Specialist, Field Service Technologist/Technician, Protection and Control Technologist/Technician, Protection and Control Specialist, P&C testing Engineer, Protection and Control Testing Engineer, Relay Technologist/Technician, Power System Technician, Power System Electrician, PSE, Electrical Engineering Technologist Benefits • Dental care, • Disability insurance, • Employee assistance program, • Extended health care, • Life insurance, • On-site gym, • On-site parking, • Paid time off, • RRSP match, • Vision care, • Wellness program

Job Description About Optimus Technologies Optimus Technologies is a clean energy technology company based in Pittsburgh, PA. and produces the Vector System, an advanced fuel system technology that facilitates a seamless transition between standard diesel and biodiesel within a diesel engine. The Vector System is currently designed for medium and heavy-duty fleet applications and is in use with leading municipal and private fleets throughout the country, enabling them to achieve near-zero carbon emissions while reducing their fuel and fleet operating costs. Find out more at optimustec.com, or on Linkedin Job Description Optimus Technologies is currently seeking a Field Diesel Technician to provide first-class service to our customer's Vector System equipped vehicles. This is a customer-facing role and will primarily require company paid travel to the customer's location to provide service. Services provided by Field Diesel Technicians include, but are not limited to, installation, service, and support of the Vector System and SMARTFuel. Comprehensive training on these systems will be provided as part of the on-boarding process. This is an hourly position ($36.00-$40.62/hour) based in Pittsburgh, PA. The primary work location for this position will be on location at the customer (70% of the time). Optimus Technologies is a fast-growing and diverse technology company; our field employees work autonomously to contribute to the overall goals of the organization and may at times be asked liaison with customers for other departments of the business. This position also has growth and new opportunity eligibility. Responsibilities • Become an expert on the Vector System electronics, software, hardware, and mechanical components., • Complete system installations: this will include OEM component dislocation and relocation (interior, exterior, and engine compartment) to install the Vector System within the vehicle., • Read, interpret, and utilize appropriate technical drawing, schematics, electrical diagrams and manuals to complete system installations, troubleshooting, and repairs, • Perform appropriate system testing upon project completion, • Confidence in interacting with customers and ability to answer/direct questions, • Maintain steady communication with customers to keep informed of work progress, • provide troubleshooting and technical support via telephone, email, or in-person, • Ensure customers' needs are satisfied in an effective and reliable manner, • Research and resolve technical issues implementing both internal and external information and resources, • Minimum 3 years of proven heavy-duty vehicle or equipment installation, diagnostic, and/or repair experience, • General diagnostic knowledge of electrical and mechanical systems, • Ability to read and interpret detailed product schematics and documentation and follow work instructions, • Experience using hand and power tools; ability to learn new tools for the job, • Familiarization with Microsoft Office tools/Google tools, • ASE Diesel certification or equivalent, and/or military service in a relevant area, and/or significant work equivalent experience, • Minimum 5 years of heavy-duty vehicle or equipment installation, diagnostic, and/or repair experience, • Extensive knowledge of both electrical and mechanical systems, with proven ability to troubleshoot and repair independently, • Moderate communication and computer skills, including familiarity with MS Office and/or GSuite, • Proven track record of working independently and under pressure, with little to no supervision when necessary, • Ability to create and keep to timelines and deadlines, and prioritize the workload without direct supervision, • A strong sense of pride in the work done that shows in quality and customer satisfaction, • Frequent physical activity such as bending, climbing, twisting, and lifting tools, parts, and materials (up to 70lbs), • Lifelong commitment to learning and consistent interest in expanding one's skillset, • Work occurring in a variety of environments, including but not limited to: office, outdoor, warehouse and shop conditions, • Ability to work around a variety of particulates, lubricants, and chemicals, • Valid driver's license with acceptable driving record; CDL a plus

Job DescriptionDescription: Think Power Solutions currently has job openings for a Protection & Control Lead Technician! If the description below sounds like you, and you want to be part of a fun and growing team, apply today! $10k Sign-On Bonus for a Lead P&C Technician $5k Sign-On Bonus for an Assistant P&C Technician Position Summary: As a Substation Protection and Control Lead Technician in the electric utility industry, you will be responsible for overseeing the installation, maintenance, testing, and repair of substation equipment that protects and controls the flow of electricity in the power grid. The Substation P&C Lead Technician will be managing and leading a Substation P&C crew as well as identifying and meeting schedule demands. The Substation P&C Lead Tech will have knowledge of such devices and equipment which includes but is not limited to digital relays, electromechanical relays, intelligent electronic devices, Station Disturbance Recorders (SDR), digital fault recorders (DFR), oscillographs and event recorders, RTU's and station SCADA systems, statistical load metering, telemetering and transducers. Additionally, understand the installation, maintenance and operation of all power line carriers (PLC), tone, pilot wire, fiber and associated P&C communications equipment. Responsibilities: • Competent Safety person who possesses a minimum of OSHA 30 Certification, • Demonstrates a solid understanding of zones of protection, • Identifies reduced and inadequate protection schemes, • Possess Client specific P&C knowledge or an ability to learn quickly, • Responsible for providing documentation of as-left/as-built field marked prints and all test results in the required timeframes, • Demonstrates a solid understanding of CT circuits, testing and analysis of results, • Reads and understand P&C drawings (incl. schematics, wiring/logic diagrams, cable schedules), • Possess advanced troubleshooting skills, • Proficient in testing and commissioning microprocessor relays including developing and running test plans, perform end-to-end testing, and the ability to interpret and understand results., • Proficient testing of Power Line Carrier schemes including wave trap and line tuner testing, • Proficient with SCADA checkout including applying RTU configurations and point verification, • Proficient in understanding and application of Human Performance tools, • Proficient in developing isolation/cut-over plans, • Fully understands Lock-Out/Tag-Out policies or procedures and adherence to the more stringent requirements, • Provides direction to physical employees, wiring personal, equipment specialist, etc. to complete P&C tasks, • Fully understands clearance points and clearance zones as established by an operating authority Think Power Solutions is a certified Great Place to Work company! This credential was earned based on extensive ratings provided by our employees in anonymous surveys conducted by the Great Place to Work organization - the global authority on workplace culture since 1992. Think Power Solutions is a leading tech-enabled infrastructure management solutions provider with highly skilled and dedicated consultants who clients entrust to manage their mission-critical infrastructure. Think Power Solutions was founded with the vision of providing exceptional client service influenced by modern technology to positively impact the utilities, telecom, and construction industries. Think Power Solutions exists to serve its clients, making every effort to understand their needs to produce a high-quality deliverable specifically tailored to meet custom requirements. This client-centric philosophy, creative thinking, and innovative solutions, combined with stellar project execution attracts top industry talent. Think Power Solutions' culture enables its people to deliver industry leading services and products. Benefits · 401(k) with 3.5% company match · 100% employer-paid medical insurance-employee only medical plan · 100% company-paid basic life insurance · 100% company-paid long-term disability · Optional vision and dental insurance · Optional short-term disability · 6 company paid holidays · 10 days PTO · 5 days paid family leave · 6 weeks maternity leave paid at 100% · 1-week paternity leave paid at 100% · Infertility benefits up to $10,000 · Adoption assistance up to $5,000 Note to Recruiters, Placement Agencies, and Similar Organizations Think Power Solutions does not accept unsolicited resumes from agencies. Please do not forward unsolicited agency resumes to our jobs alias, website, or to any Think Power Solutions employee. Think Power Solutions will not pay fees to any third-party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered the property of Think Power Solutions and will be processed accordingly. EEO Statement Think Power Solutions provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, pregnancy or maternity, national origin, citizenship, genetic information, disability, protected veteran, gender identity, age or any other status protected by law. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment. Think Power Solutions will not tolerate any unlawful discrimination towards, or harassment of applicants or employees, by anyone at Think Power Solutions, or anyone working on behalf of Think Power Solutions. Requirements: Minimum Requirements: • Associate's degree in electrical engineering or a related field (preferred)., • Minimum of 5 years of experience as a protection and control technician., • OSHA 30 Construction Safety Certification, • Strong understanding of protection and control principles and practices., • Experience with relay testing and commissioning., • Excellent leadership and communication skills., • Strong teamwork and collaboration skills., • Ability to work independently and take initiative., • Proven ability to meet deadlines and stay organized., • Commitment to safety.

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description Allied Universal® is hiring a High Velocity Inside Sales Team Manager. The High Velocity Inside Sales Manager will lead a team of inbound sales representatives responsible for engaging existing security guarding clients and aligning their needs with integrated technology solutions. The High Velocity Inside Sales Manager is a leader that will drive revenue growth through consultative selling, team development, and collaboration with operations, technology, and client success teams to ensure seamless solution delivery. RESPONSIBILITIES: Leadership and Team Development • Build, lead, and develop a high performing inside sales team focused on qualifying and executing sale for inbound guarding clients for technology solution opportunities, • Create a coaching culture that emphasizes accountability, collaboration, and continuous learning, • Standardize a solutions sales process that exceeds service delivery and client satisfaction, • Develop, monitor, and refine KPIs throughout the client life cycle, identify and execute process improvements, and enhance efficiency and conversion outcomes, • Must possess one of the following:, • Bachelor's degree in Business, Marketing, or related field of study, • Associate's degree in Business, Marketing, or related field of study with a minimum of five (5) years of inside sales leadership experience, • High school diploma or equivalent a minimum of ten (10) years of inside sales leadership experience, • Minimum of three (3) years of experience in inside sales leadership, • Demonstrated ability to coach, motivate, and scale high-performing sales teams, • Strong analytical and problem-solving skills with a focus on data-driven decision-making, • Proficiency in Salesforce or comparable Customer Relationship Management (CRM) tools and Microsoft Office, • Excellent oral and written interpersonal communication skills, • Experience in security technology, SaaS, or B2B technology sales, • Exposure to integrated guarding and technology solution sales or managed services environments, • Medical, dental, vision, basic life, AD&D, retirement plan and disability insurance, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-DH1 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1484555

Job Description IP/MPLS Networking Engineer Salary: $205,000- 245,000 Contract Length: 12 month SOW Location: Dallas, TX - in-office presence required whenever needed and up to 3 times a week *This represents the potential salary range for this position depending on education level, years of experience and/or certifications in addition to other position specific requirements which may impact salary Summary: This role will be the subject matter expert (SME) for IP/MPLS wide area networks, taking on design, implementation, and high-level problem-solving. This role will participate in large scale project initiatives, such as deploying a 100+ site private LTE solution that will be supported over the existing private IP/MPLS network. Duties will primarily be aligned with ensuring the IP/MPLS infrastructure is optimally and securely configured to ensure the success of these projects while also ensuring existing OT/Enterprise services already supported on the network remain stable and not put at risk. Key Roles and Responsibilities • Evaluate project requirements/scope and work in close collaboration with project teams consisting of project managers, architects, engineers, cyber security in order to develop end-to-end communications solutions., • Create various design and as-built documentation including network architecture diagrams, templates, scripts, operational support materials, bandwidth capacity reports, configuration/security compliance reports, hardware selection, validation criteria, etc., • Work with the existing network architects/engineers to integrate WAN with data centers support teams and vendors to coordinate IP routing and connectivity into the Enterprise networks., • Submit firewall change requests to Security team as necessary for enabling communications to/from the WAN and/or associated management tools/enterprise applications., • Create MOPs and Test Plans and/or review MOPs and Test Plans developed by other teams., • Work directly with the Network Operations team as well Field Network Technicians as a senior technical support role during the implementation of changes which may occasionally be performed outside normal business hours or weekends., • Evaluate risk and make recommendations to remediate a discovered vulnerability with the IP/MPLS network., • As a network SME, you will be expected to provide technical information or assist with data/log collection in the event of a cyber incident which directly or indirectly involves the IP/MPLS network., • Join other engineers and/or technician to perform on-site visits to the offices, data centers, tower sites or substations as necessary to evaluate and plan the deployment of new network infrastructure., • Adhere to the Network Engineering standards/best practices as well as create new standards or adjust as networks evolve., • Adhere to the Human Resources and Cyber Security policies. Skills and Qualifications • High School diploma, GED or equivalent is required; Bachelor’s degree in Engineering is preferred., • Strong understanding of MPLS, BGP, ISIS, L3VPNs, traffic engineering and QoS is required., • Experience with Nokia 7750 and 7705 router platforms is highly preferred., • Experience working directly with service providers/ISPs for leased circuits, dark fiber, cellular and radio backhaul solutions., • Experience working with security teams and knowledge with TCP/UDP based protocols and how these are supported across firewalls., • Experience utilizing standard network industry “devops” tools as well as able to work with REST APIs and manipulate/analyze both structured and unstructured datasets to solve complex tasks/enquiries., • Strong interpersonal and communication skills, both verbal and written, are required., • Proficient at creating and managing vendor support cases (both internal and external) as well as using workflow or issue-tracking tools such as JIRA.

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description Allied Universal® is hiring a Vice President, Engineering and Technology. The Vice President will be a strategic and operational leader responsible for the vision, development, and execution of the company's engineering and technology roadmap. The Vice President of Technology and Engineering oversees pre-sales Solution Architecture, post-sales Solution Engineering, Estimating, and the Configure, Price, and Quote (CPQ) platform. This role leads a matrixed, decentralized team of regional engineering managers and vertical-market engineering groups. The Vice President will have strong executive presence, cross-functional leadership, and a passion for emerging technology and innovation. RESPONSIBILITIES: Leadership and Strategy: • Define and execute the company's technology strategy and roadmap while refining engineering standards, processes, and best practices for scalable, high-quality, cost-effective delivery, • Lead cross-functional collaboration with Sales, Marketing, Operations, IT, and Business Unit leaders to drive go-to-market strategy, solution design, and execution, • Chair the Technology Evaluation Committee to assess and adopt new technologies, vendors, platforms, and methodologies; monitor industry trends to identify and evaluate emerging innovation, • Oversee pre-sales Solution Architects and post-sales Engineering teams, driving alignment on customer requirements, scalable solution design, and consistent delivery practices across a decentralized organization, • Lead the Estimating function, refining processes, pricing models, and labor methodologies; manage and optimize CPQ tools in line with sales strategy and engineering input, • Align regional managers and sector-specific engineering leads to support scalable delivery and technical consistency across the business, • Maintain and expand expertise in low-voltage electronic security systems: intrusion detection, video surveillance, access control, life safety systems, sensors, edge devices, networking, and transmission systems, • Bachelor's degree in engineering, Information Technology, or related field of study, • Minimum of fifteen (15) years of progressive experience in engineering or technical leadership roles within the physical electronic security, life safety, Smart Building, BIoT, PropTech, or low-voltage systems integration industry, • Minimum of ten (10) years of direct engineering leadership experience, including management of cross-functional and geographically dispersed teams, • Experience in global operations or projects involving multinational clients, • Visionary leadership with a bias for innovation and execution, and the ability to navigate ambiguity in fast-paced, evolving environments, • Strong business acumen and understanding of financial drivers in project-based services, • Demonstrated experience in Configure, Price, and Quote (CPQ) applications, CAD (Computer-Aided Design), BIM (Building Information Modeling), pre and post-sales engineering, and large-scale solution architecture, • Proven record of technology evaluation, adoption, implementation, and roadmap development in a complex integration or systems-based business, • Strong understanding of field services operations and experience working in a matrixed, decentralized environment, with a collaborative mindset and ability to lead across functions, • Exceptional communication, leadership, and stakeholder management skills at all levels of the organization, with executive presence and exceptional presentation and public speaking abilities, • Technical acumen with knowledge of electronic security systems, IP networking, sensors, and integrated platforms, • Master's degrees in engineering, Information Technology, or a related field, • Professional certifications (e.g., CPP, PSP, RCDD, NICET, PMP, CompTIA), • Base salary range: $150,000-$200,000 based on location and experience, 40% annual bonus eligibility, • Medical, dental, vision, basic life, AD&D, retirement plan and disability insurance, • Eight paid holidays annually, five sick days, and four personal days, • Executive Flex Time Off Plan #LI-BL Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1493907

Job Description TAIT is a proud partner of the DoD SkillBridge Program and is proud to offer career opportunities to U.S. Armed Forces members as a way of recognizing the unique skills and qualities that our military personnel possess. The DoD SkillBridge Program is an opportunity for service members to gain valuable civilian work experience through specific industry training, apprenticeships, or internships during the last 180 days of service. Please visit our website at TAIT.com to learn more about the opportunities available. Qualifications • Current Active Duty Servicemember, • Separating from the Military in 4-12 months, • Able to complete a minimum of 8 weeks and up to a maximum of 6 months SkillBridge apprenticeship., • Able to work 40 hours per week. Essential Duties & Responsibilities • Lead and actively engage in all on-site activities, capturing comprehensive photo documentation for each phase., • Maintain a constant presence in the work area, unless temporarily relieved by an approved interim Foreman., • Coordinate material procurement, including gravel, concrete, etc., and document rental equipment., • Inspect and inventory delivered equipment/materials/parts, ensuring compliance with specifications., • Schedule and oversee inspections, liaise with inspectors, and manage subcontractor activities., • Conduct and document daily safety meetings, identifying and addressing potential hazards in the work area., • Enforce strict compliance with safety requirements for all personnel, ensuring cleanliness and security., • Promptly report accidents and incidents to the Project Manager or Construction Manager., • Manage the job schedule, addressing daily issues impacting timelines with the Construction Manager/Project Manager., • Ensure the project stays within allocated labor hours, consulting with the Construction Manager/Project Manager before implementing overtime. Complete and submit daily logs., • Provide the Project Manager with installation/operating instructions for new equipment., • Complete and submit warranty documents for new equipment to the Project Manager and furnish detailed as-built drawings.Minimum Qualifications, • 3-5 years of relevant experience in commercial petroleum construction installation/supervision., • ICC UST Install/Retrofit, ICC UST Removal, ICC Service Technician, and Veeder Root certifications., • Strong judgment and adaptability to changing field conditions and requirements., • 24 or 40-hour HAZWOPER certificate or current 8-hour refresher course., • Valid Driver’s License., • Proficiency in Microsoft Office (Outlook, Teams, Word). Additional Requirements, • Completion of background check, MVR, and physical/drug screening., • Clear and professional communication skills with clients and team members., • Ability to drive to job sites, occasionally covering extensive distances, up to 1000 miles per week., • Occasional out-of-town work required., • Strong organizational skills and commitment to maintaining good housekeeping practices., • Proficient in reading and interpreting design plans., • Capability to drive/haul a trailer to and from job sites., • Proficient in reading and interpreting machine diagnostic reports., • Navigate various job site terrains, including dirt, cement, asphalt, uneven concrete, etc. TAIT invests in you by providing a comprehensive compensation and benefits program along with the opportunity for professional growth and development. Our benefits package includes valuable and affordable options for health, dental, vision, employer paid life insurance, 401(k) with match, generous paid time off and other supplemental benefits. TAIT’s core value is its culture of kindness. With this, you’ll find a family-oriented environment and flexibility to manage work and life with a rewarding career. Here are some benefits you can find when you join the TAIT Team: • Flexible Work Schedule Options - Remote, Hybrid, In-Person, • Medical options including PPO and HDHP with Health Savings Accounts (no extra charges for spouse or dependent coverage), • Dental Plans with little to no deductible, • Vision PPO plan that’s accepted widely from local offices to large retailers, • Company paid Life Insurance, • Voluntary Life, Accident and Critical Illness plans, • Dependent Care and Flexible Spending Accounts, • Employee Assistance Program, • Retirement plan 401(k) with employer match, • Paid time off to relax and recharge with vacation, holidays, and sick time., • Annual memberships with Strava and Headspace for additional health and wellness benefits, • Maternity and Paternity leave time options to care for the newest little family members, • Support for professional growth and development., • Corporate Lodging Program (CLC) TAIT is an equal opportunity employer, dedicated to a policy of non-discrimination in employment on any basis including race, color, age, sex, sexual orientation, gender identity, religion, national origin or any other legally protected status. Consistent with the Americans with Disabilities Act, the company will make reasonable accommodations to assist in the application process upon the request of an applicant. No question on this application is intended to secure information to be used for discriminatory purposes. California Applicants - view the CA Privacy Notice here before submitting your application. Powered by JazzHR eN3eE5umll

Job DescriptionProStaff Workforce Solutions is seeking an Electronics Technician II & III for privately owned manufacturing company in Richardson, TX 75081. If interested, we would be excited to connect and discuss this opportunity in more detail. Contract-to-Hire Pay Rate: DoE Schedule: Monday - Friday plus overtime on Saturday Flexible start time 1st shift - 5:30 am or 6:30 am - 1:30 pm or 2:30 pm Reports To: Team Lead - Supervisor Summary: Tests, troubleshoots and repairs PCB assemblies, subassemblies, or final assemblies demonstrating the ability to troubleshoot down to the component level. The Technician may program, set up, and run automated assembly equipment. Essential Duties and Responsibilities: Technician Level I: • Reads and interprets bill of material, work orders, test procedures, performance specifications, wiring diagrams and schematics to determine testing procedure and equipment to be used., • Confers with Engineering, Quality, Shipping and Operations Management regarding test procedures and results., • Performs functional tests on subassemblies and Finished Goods products, • Work with team members to produce surface mount PC boards., • Interacts with internal QC and Test Department to eliminate placement/ solder process errors., • Maintain accurate and complete documentation., • Documents product failures and communicates the data to Management in a timely manner., • May setup and run SMT stencil print, placement, or reflow equipment. May also be asked to hand place different SMT parts., • Maintains a neat and orderly workspace., • Other duties may be assigned by lead or supervisor. Technician Level II: • All Technician Level I duties., • Works with Engineering on New Product Introduction. Technician Level III: • Analyzes and repairs PCB assemblies that have failed in production, been returned or replaced by customers, field service personnel, or CSD department., • Provides professional documentation on board repair in regard to; customer complaint, analysis, repair and root cause of issue. Reports may be generated using email, Excel, Word, LabVIEW and other technical documentation to support the analysis., • Performs other Refurb or production test technician functions during peak periods., • Program SMT specific equipment such as stencil print, placement, reflow, or AOI equipment., • May also perform reflow profiles associated with PCA products., • May be required to provide technical support to Engineering or production. Qualifications: • Associate’s degree in Electronics Technology or a related field (or equivalent experience)., • Minimum of 2 years of relevant experience, • Hands-on experience with soldering, • Familiarity with electronic circuits and components., • Proficient in using testing and diagnostic equipment., • Strong attention to detail and ability to follow instructions., • Good communication skills and ability to work in a team. About ProStaff Workforce Solutions We are a fast growing and successful agency that treats all its clients and candidates with a personal touch. ProStaff Workforce Solutions is a group of industry experts—many hailing from larger agencies—who know their business well and enjoy working in a more hands-on and flexible environment, with attention to detail. Our mission is to match quality people with quality jobs and quality companies to maximize productivity and profitability. We develop long-term relationships and provide a level of customer service and expertise that instill confidence and trust in our client companies and candidates. Our Values • Integrity, • Commitment, • Quality, • Diversity Benefits for eligible employees • Direct deposit, • Weekly pay, • Medical benefits, • 401(k) Plan Please visit us at to explore all opportunities. #IND3 #ps Company DescriptionProstaff Solutions is committed to all aspects of staffing services We offer comprehensive best-practices for our clients and employees. Our Vision: ProStaff Solutions strives to be the premier employment solutions provider to every community we serve. Our Mission: Our mission is to bring the right people to the right job every time. Accomplishing this, we better people's lives and increase our customers and employees success. Our Values : Our Pledge of Integrity Our name is the most important thing we own. To us, it is more than an identity. It is also how we act. It is both the foundation and the heart of our business. Because our success depends on our personal integrity and honesty, we work hard. We also reward hard work. We believe great things happen when we listen to each other, and that is why our doors are always open. We also strive to strengthen our communities by example in leadership, and by donations of time and resources.Prostaff Solutions is committed to all aspects of staffing services\r\nWe offer comprehensive best-practices for our clients and employees. \r\n\r\nOur Vision: \r\nProStaff Solutions strives to be the premier employment solutions provider to every community we serve.\r\n\r\nOur Mission:\r\nOur mission is to bring the right people to the right job every time. Accomplishing this, we better people's lives and increase our customers and employees success.\r\n\r\nOur Values :\r\nOur Pledge of Integrity\r\nOur name is the most important thing we own. To us, it is more than an identity. It is also how we act. It is both the foundation and the heart of our business.\r\nBecause our success depends on our personal integrity and honesty, we work hard. We also reward hard work. We believe great things happen when we listen to each other, and that is why our doors are always open. We also strive to strengthen our communities by example in leadership, and by donations of time and resources.

Job Description Experienced Apartment Lead Maintenance Supervisor Qualifications • At least 3 years of experience in maintenance, on-site multi-family property maintenance, or equivalent field., • Previous experience managing other technicians, • HVAC or EPA certified, • Bilingual, • High School diploma or equivalent required., • Ability to read, write, and speak English., • Must have valid driver’s license and automobile insurance., • HVAC/EPA License, • Certified Pool Operator (CPO) desired, • Diagnoses and performs minor and routine maintenance or repair involving the following daily., • Electrical and Plumbing (including water lines)., • A/C and heating systems., • Water irrigation systems., • Stairs, gates, fences, patios, railings., • Tile, carpet, flooring., • Roofing, gutters, fasteners., • Interior/exterior lights., • Fireplaces, ceiling fans., • Gas fixtures and appliances where applicable., • Shutters, doors, cabinets, windows, sliding glass doors., • Boiler, gas, and electric., • Door locks., • Security systems., • Ceiling leaks., • Walls, texturing, painting., • Pool areas, tile, hot tub/spa, pool furniture., • Ensures that all make-ready repairs and services are completed correctly and on schedule., • Reports all major repairs and requisitions to the manager before any expenditure of funds., • Changes lock and make keys., • Removes and transfers heavy appliances and equipment from storage area to apartment (or vice versa) as circumstances warrant. Assists in moving abandoned furniture, appliances, etc., to a dumpster when necessary., • Maintains adequate inventory of spare parts and maintenance materials to handle most common repairs and situations., • Identifies all utility meter cut-offs, apartment and fixture cut-offs, sewer cleanouts and prepares maps indicating the same, • Performs work area clean-up and safety-related duties., • Ensures that storage areas remain locked when not in use., • Assists in keeping grounds neat and free of litter. Rakes, sweeps, shovels as circumstances warrant., • Performs maintenance tasks personally or delegates to assistants. Oversees and inspects work performed by assistants., • Institutes and manages the system for handling resident service requests. Corrects situations within 24 hours when possible., • Conducts regularly scheduled safety meetings with entire staff; maintains and communicates HAZCOM standards. Keeps MSDS sheets current and readily accessible. Maintains thorough knowledge of pertinent laws and EPA and OSHA regulations governing property storage and management of hazardous materials, including solvents, flammables, caustics, and refrigerants., • Must be aware of the condition of physical property throughout the community and immediately correct unsafe conditions, e.g., broken gates leading to the pool, broken steps, open holes, broken/burned-out exterior lights., • Maintains accurate records regarding preventative maintenance, service requests (received and completed), expenditures, apartment make-ready status, work-in-progress, etc., • Schedules and performs minor and routine maintenance on all appropriate equipment regularly. Inspects and maintains all tools in excellent condition., • Trains and assists in the development of all subordinate maintenance staff. Instills a “safety first” attitude not only with maintenance technicians but with all staff., • An employee in this position must be knowledgeable and skilled in the safe use and maintenance of the following tools., • Hand Tools –, • Various wrenches, hammers, grips, saws, sledgehammers, snips, posthole diggers, etc., • Power Tools –, • Grinders, sanders, buffers, saws, drills, etc., • User-Mover Aids –, • Wheelbarrows, dollies, hand trucks, buckets, hoists, jacks, step ladders, full ladders, double ladders., • Mechanical Equipment –, • Motors, pumps, compressors, blowers, electrical and hand-powered drills, etc., • Measuring Devices –, • Ability to work a minimum of 40 hours per week. Must be available evenings, nights, weekends for staffing needs and emergencies., • Be able to stand and walk or sit alternatively depending on specific needs of the day. Estimate 70-85% of the time is spent on feet., • Able to move equipment and appliances., • Ability to work in a fast-paced environment, meet deadlines, and multi-task., • Have occasional need to perform the following physical activities:, • Bend/Stoop/Squat, • Climb stairs and ladders, • Reach above shoulder, • Grasp/Grip/Turn tools and equipment to perform routine repairs., • Finger dexterity to handle tools., • Lift 25-50 Lbs. Note: Lifting and carrying items over 50 lbs. should be done using assistance from one or more persons. Examples of heaviest items lifted include washers/dryers, refrigerators, A/C units, abandoned sofas, etc., • Push or pull 75 Lbs., • Good Vision – frequently need to see things clearly beyond arm’s reach—constant need to see small detail when performing routine maintenance duties., • Good Hearing – must use listening skills to diagnose needed repairs., • Able to work in a fast-paced environment with an attitude toward customer service., • Performs duties under pressure and meets deadlines promptly., • Works as part of a team to complete assignments., • Takes instruction from supervisors., • Ability to problem-solve., • Interacts with co-workers, supervisors, guests, and the public professionally and pleasantly., • Frequent need to utilize personal transportation to pick up the replacement parts and supplies from vendors. Rotation “on-call” status may occasionally require expedient travel to assigned property at a moment’s notice., • MUST be able to apply principles of logical thinking to define problems, collect pertinent data, establish facts, draw valid conclusions and initiate an appropriate course of action. Must effectively convey ideas, images, and goals to a diverse group of personalities Conducts all business by company policies and procedures, state and federal laws; e.g., OSHA ADA, Fair Housing, Americans with Disabilities Act, and all other laws about apartments. NE Property Management provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, NE Property Management complies with applicable state and local laws governing nondiscrimination in employment in every location where the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Job Type: Full-time Company DescriptionSpecializing in multi-million dollar projects nationwide for both Public and Private sectors. At NE Property Management, we strategically manage luxury high-rises, historical developments, luxury apartment communities and more. Our knowledge and expertise expands beyond just property management; our sister companies in development and construction allow us to oversee every aspect of the process from concept and development to construction, leasing, and beyond.Specializing in multi-million dollar projects nationwide for both Public and Private sectors.\r\nAt NE Property Management, we strategically manage luxury high-rises, historical developments, luxury apartment communities and more. Our knowledge and expertise expands beyond just property management; our sister companies in development and construction allow us to oversee every aspect of the process from concept and development to construction, leasing, and beyond.

Job Description about Climatec/Bosch Building Technologies For over 40 years, Climatec has steadily invested in their people, technology, and services to be a trusted business partner for building solutions. As part of the Bosch Building Technologies Integrator Business in North America, Climatec is one of the leading providers of building technologies and energy solutions in the nation – delivering results for thousands of customers, every day. Climatec’s strategic business partners include the world’s leading suppliers of building automation, security, life safety, and energy efficiency technologies. about Bosch The Bosch Group is a privately held supplier of innovative technology and services with over 400,000 associates worldwide. Its unique private ownership structure was established to promote entrepreneurial freedom and long-term business focus. Bosch’s operations serve millions of customers across four business sectors: Mobility Solutions, Industrial Technology, Consumer Goods, and Energy and Building Technology. Job Duties & Responsibilities: • Build trust, develop and maintain strong relationships with existing clients, building owners, facility managers, property managers, engineers, and consultants, • Create and implement a sales strategy - account management plan to achieve or exceed annual sales plan on a consistent basis, • Maintain involvement and account management throughout the complete service sales cycle to ensure complete customer satisfaction, • Develop technical skills and a clear understanding of current technologies, software, and best industry practices geared toward Climatec’s offerings, • Proactively identify and pursue new sales opportunities, focusing on advanced digital offerings, energy conservation measures, technical support offerings and strategies for Building Automation Systems, • Establish contact with prospects and qualify potential buyers by scheduling sales calls, following up on leads, and utilizing Climatec marketing strategies to maintain a high level of sales activity, • Convert existing and new accounts to Technical Service Agreement accounts, • Collaborate with Climatec construction project team, engage and deliver technical service agreements to newly assigned clients at project completion, • Target owners and end users outside of the current Climatec customer base, • Provide technical advice and layout projects to meet customer challenges and budgets pertaining to their building needs, • Create and deliver sales presentations to clients showcasing Climatec’s offerings, • Estimate project costs and write proposals based on customer requests and expectations for scope of work and support agreements, • Maintain accurate records of sales activities and customer interactions in our CRM system, • Ability to work as a team player, at times teaming will be required to work alongside other sales representatives in building automation and security-life safety, • Actively participate in outside organizations & trade associations in our industry to network and expand Climatec’s presence in the marketplace, • Be able to prepare and present PowerPoint presentations in person, capable public speaking skills, conducting virtual meeting presentations, while maintaining organizational skills and time management., • Ability to travel as needed Minimum Qualifications: • High school diploma or GED equivalent. Extensive work experience (5 years+) within building automation systems can be substituted for the education requirement., • 3+ years of experience in Building Automation control systems working as a technician, field installer, or systems specialist., • 5+ years of experience with the sales of commercial DDC control systems, HVAC mechanical equipment, MEP test & balance – commissioning and start-up., • 5+ years of consistent growth in sales within the HVAC/BAS/BMS industry., • 5+ years of experience servicing existing service contracts with the ability to recommend new equipment and technologies to customers., • Sound knowledge of Alerton, Distech, Honeywell, Tridium and Niagara., • Proven track record of meeting and exceeding sales targets., • Experience in customer service, delivering above and beyond client expectations while communicating the suggestion(s) of new service equipment/technologies for new and existing clientele., • Excellent communication and interpersonal skills., • Bachelor’s degree in business administration, General Studies, Marketing, Engineering or related field., • 5+ years leading sales teams to meet and exceed sales quotas., • 5+ years’ experience working with sales analytics tools and software systems., • 5+ years’ experience of prospecting new business opportunities without warm leads., • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program, • Be able to lift and carry, drawings, personal computers, material, and spend significant time sitting, climbing stairs, or traveling etc., • Be able to lift up to 50lbs., • Maintain a satisfactory driving record., • On a typical day, be able to spend significant time sitting, standing, walking, climbing a flight of stairs, conducting field surveys and delivering presentations, • In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. Please submit your resume along with a cover letter detailing your relevant experience and how you meet the qualifications outlined above. Additionally, please include any relevant certifications or examples of successful project implementations. Additional Information: Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With nine offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. As a Quality Engineering Technician, you’ll play a critical role in ensuring product reliability and maintaining high-quality standards on the production floor. You’ll own operational quality for your assigned line, including maintaining inspection plans, calibrating tools, responding to initial NCRs, supporting rework inspections, and driving day-to-day production quality assurance.What You'll Do: • Perform inspections and testing on raw materials, components, and finished products to ensure compliance with quality standards., • Maintain and update existing inspection plans in 1Factory, adding clear instructions and visuals to support accurate inspections., • Calibrate and maintain testing equipment and tooling; conduct audits and document nonconformances., • Act as the first line of response for production quality issues, investigating and resolving lower-severity NCRs and escalating critical issues to Quality Engineers., • Support shop floor containment by identifying affected units and establishing gate-check inspections when needed., • Lead MRB activities in production, coordinating rework plans, verifying rework execution, and ensuring compliance with QE direction., • Collaborate with Quality Engineers, inspectors, and production teams to drive corrective actions and process improvements., • Contribute to continuous improvement initiatives by monitoring production performance and recommending solutions.Required Qualifications:, • 3+ years of related experience and training in quality control or related positions, • Understanding of GD&T principles, • Demonstrated ability to use hand tools and calibrated equipment like calipers, micrometers, scales, ring gages, pin gages and other standard measuring instruments., • Root cause analysis, corrective action, and preventive action methods Preferred Qualifications, • Associate’s degree or equivalent in a relevant technical field., • Experience in quality control or related positions within a manufacturing environment., • Proficiency in reading and interpreting engineering drawings, specifications, and quality documentation., • Strong knowledge of measurement tools and equipment, including calipers, micrometers, gauges, and optical comparators., • Familiarity with various inspection methods, techniques, and statistical process control (SPC) principles., • Experience with root cause analysis, corrective action, and preventive action processes., • Ability to perform configuration verification of all levels of assemblies/hardware., • Familiarity with quality management systems and standards, such as ISO 9001., • Mastery in computer applications, including spreadsheet software and quality management software. Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description PHASOR Engineering Inc. is a dynamic Alberta based company specializing in engineering, design, and testing / commissioning of medium to high voltage electrical facilities. Focused on providing the most cost-effective and efficient solutions to power system engineering, we are involved in a diverse range of projects from preliminary engineering through to the commissioning and startup. We are currently seeking a highly motivated and experienced Electrical Engineering Technologist, PSE, or Engineer to join our field services team on a full time basis. If you are an excellent communicator and skilled problem-solver with strong attention to detail, we offer a dynamic work environment where you will be continuously challenged in all aspects of the testing and commissioning process. As a condition of employment, successful applicants agree to undergo a Backcheck screening, which includes identity verification and a criminal background check. Responsibilities: • Manage and lead a commissioning crew of workers., • Testing and commissioning of MV/HV power system protection & control schemes in the utility, power generation, and oil & gas industry., • Read and interpret drawings and troubleshoot / resolve technical issues., • Train/develop employees to ensure highest performance standards are met., • Report preparation and submission., • Assist with generation of commissioning startup procedures or work instructions., • Ensure compliance with all safety practices as per corporate, client, and industry standards., • The successful candidate should possess a Bachelor’s Degree in Electrical Engineering, Power Systems Electrician Journeyman Ticket, or an Electrical Engineering Technologist Diploma from a recognized institute., • Eligible for registration with APEGGA , ASET, or similar., • Comprehensive understanding of key principles of electrical power system protection and controls including SCADA, relay protection, metering, equipment functionals, and telecom networks., • Minimum 5+ years of proven experience in the medium voltage and/or high voltage utility substations and power generation industry with experience in a supervisory role leading and running projects in greenfield and brownfield substations., • Relay testing of microprocessor-based protection IED’s (SEL, ABB, Siemens, GE, etc.) with fully automated test equipment (Omicron CMC356) and test data management., • Experienced in high voltage primary equipment testing and commissioning involving power transformers, reactors, circuit breakers, CT’s, PT’s, surge arrestors, disconnect switches, cap and reactor Banks, etc., • Testing and commissioning as per NETA/IEEE/IEC standards., • Strong understanding of CSA Z462 safety standards., • Strong interpersonal and communication skills and an extreme attention to detail are essential., • Knowledge of the Microsoft office software suite of programs coupled with strong computer skills., • Excellent organizational skills and ability to manage a wide variety of issues simultaneously., • Strong analytical, risk assessment and problem solving skills., • NETA Testing Certification an asset., • Must be legally able to work in Canada, VISA Sponsorship is not available for this position., • Valid driver’s license with clean driving record., • Typical out of town working shifts are (but not limited to) 10/4, 14/7, 14/14, 21/7, 21/14., • Working hours are generally from 7am - 5:30pm at 10hrs/day., • Daily work hours and shifts are subject to change based on project requirements, applicants must be flexible to accommodate these changes when required. Phasor Engineering Inc. offers a competitive compensation and benefits package and excellent opportunities for growth and advancement. We are an Equal Opportunity Employer committed to a diverse workforce. While we appreciate all applications we receive and the applicant's interest in our company, only those who are selected for an interview will be contacted. Other names for these roles include: Commissioning Technologist, Commissioning Engineer, Commissioning Lead, Commissioning Specialist, Commissioning Manager, Field Service Specialist, Field Service Technologist/Technician, Protection and Control Technologist/Technician, Protection and Control Specialist, Protection and Control Testing Engineer, Relay Technologist/Technician, Power System Technician, Power System Electrician, PSE, Electrical Engineering Technologist Benefits • Dental care, • Disability insurance, • Employee assistance program, • Extended health care, • Life insurance, • On-site gym, • On-site parking, • Paid time off, • RRSP match, • Vision care, • Wellness program

Job Description This is a travel role. The selected candidate will travel up to three weeks at a time (out of market travel). Fiber Optic Test Technician CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Fiber Optic Test Technician will have experience installing equipment in a variety of environments including: Central Office, Data Center, and Optical Transport equipment. The ideal candidate will have will have fiber optic testing and troubleshooting experience. The candidate will be responsible for all of the field-testing process under the direction of an installation supervisor. The candidate will be responsible for providing continuous updates to the management team about milestones, site arrival, work completion, site departure, and any delays/obstacles that are jobsite related. The candidate will also provide timely progress updates on the overall project, and relay any pertinent information to the customer/installation supervisor, via project management software. The candidate must be willing to travel nationwide. Duties and Responsibilities: ● To perform all Fiber Optic Tests: ○ Optical Time Domain Reflectometry (OTDR) ○ Optical Return Loss ○ Optical Power Loss ● Maintain tools assigned to the job as well as monitor tool calibration requirements. ● Preparation and submission of daily reports to the installation supervisor. ● Assigning specific tasks to lower level installers assigned to his/her team, and monitoring their work for efficiency, quality, and safety. ● Work with supervisor for scheduling. ● Responsible for the accuracy in the test results by verifying data from opposite end before leaving the site. ● Coordinate timing and procedures of doing testing within the customer’s maintenance window (with Installation supervisor), if applicable. ● Responsible for the accuracy of all the test parameters required by the customer. ● Completes quality assurance on all reports to check the data for errors and inconsistencies. ● Responsible for overall safety, quality, and efficiencies of his/her crew. ● Interfaces with customer representatives while on site. ● Provides technical support for customer contacts and Technicians on request. ● Implement and integrate the node-to-node by OTDR trace, power trace, resolving OSP issues, and high reflecting issue. ● BER Testing over all deployment to build the 100G circuit on new system to ensure proper testing of entire system. ● Should have experience in photonics, power audits and signal flow. ● Perform hardware testing, such as power verification, device provisioning and system tests. ● Perform inventory of all job-related materials. ● Ensure project deadlines, timely service and quality standards are met. ● Produce test reports and analysis documents. ● Maintain on-site job records and administration tracking. ● Apply logical troubleshooting procedures to network services including logical fault isolation on network equip, carrier circuitry, CPE, customer wiring, and customer hardware and software applications to customer satisfaction. ● Become proficient with internal project management software as it applies to tracking all aspects of order flow. ● Work closely with the Engineering and Project Managers to ensure customer satisfaction. ● Meet or exceed customer and internal documented acceptable levels of quality. ● Performs other related duties as assigned by management. ● Nationwide travel up to 100%. Credentials and Experience: ● Requires experience in Data Center/PoP/CO/Optical transport installation/test & turn-up experience. ● Must have in-depth knowledge of testing and cleaning optical fibers. Knowledge, Skills, and Abilities: ● Proficient in the use of Fiber Optic test equipment from various manufacturers – EXFO, VIAVI, and others. ● Efficient use of any and all fiber cleaning kits. ● Possess a good mechanical aptitude. ● The ability to adapt to various work environments. ● Knowledge of optical routing equipment installations. ● Knowledge of fiber optic cable installation & testing practices. ● Knowledge of AC/DC power. ● Proficiency in Word, Excel, PowerPoint, and the Internet; must be adept at learning different computer programs and business systems. ● Must have clean driving and criminal records and successfully pass a drug test. ● Knowledge of test equipment, tools and materials used in construction, installation, troubleshooting, maintenance and repair of telecommunications systems and equipment. Special Requirements: ● Due to the nature of our Customer’s requirements work schedules and hours of operation are dynamic. The Lead Installer must be able to adjust to varying work schedules. ● Will be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. ● The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. ● While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel and talk or hear. The employee is frequently required to reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl. ● The employee must occasionally lift and/or move up to 75 pounds. ● Specific vision abilities required by this job include close vision (clear vision at 20 inches or less), distance vision, color vision, peripheral vision, depth perception and ability to adjust focus as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. ● The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. Work Environment: ● The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals Company DescriptionCBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades.\r\n\r\nOur Mission\r\nCBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises.\r\n\r\nCBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry.\r\n\r\nWe are always looking for passionate, driven and talented individuals to join every facet of our team.

Job Description BOWE US is rapidly expanding in North America and we need your technical expertise! BOWE US, a wholly owned subsidiary of the BOWE Group, is a leading supplier of production mail and parcel automation equipment and is one of the world’s leading solution providers for modern print and mail production centers. BOWE Group is a global company headquartered in Augsburg, Germany just outside of Munich. The US subsidiary is responsible for the sales and service of all equipment within the North American market. Our service technicians are assigned to work at various customer site locations, assisting with machine service and preventive maintenance. We are looking for candidates that are highly motivated, extremely mechanical and self-starters for several locations throughout North America. Position Overview: As a Bowe technician, you will utilize your technical skills and knowledge to perform preventative maintenance, quickly diagnose problems and perform the necessary repairs. When a machine is out of service, the focus is to return the system back to production all while adhering to the Company’s procedures for proper repair, safety and escalations. This is customer-facing role so providing a positive experience for our customers is critical. Necessary Skills for Success: • Strong customer relations skills, • Excellent analytical and problem-solving skills, • Ability to read schematics, • Proficiency in windows operating systems, • The ability to utilize your knowledge of mechanical and electrical systems to troubleshoot machine problems. System repairs are roughly 80% mechanical and 20% electrical with a software component overlay, • Ability to maintain focus under pressure while retaining a positive attitude, • Tools are provided – No need to purchase your own tools, • Company work shirts are provided, • Training – Both practical on the job training and factory certified training will be provided, • Support – Access to factory documentation along with local and national technical support resources, • Safety – A neat, clean, well-organized work environment where safety is a focus, • Climate controlled facilities – Facilities are indoors and climate controlled, • An attractive benefits package and competitive pay, • Shift premiums for 2nd and 3rd shift technicians. Applicable and Transferable Skills: At Bowe, we understand that great customer service skills and technical aptitude exist in many industries. If you have a technical background in electronics and/or mechanics and think you would be a good fit for our team, please do not hesitate to apply. Many of our technicians come to us from various technical backgrounds, such as electro-mechanical, mechatronics, automation, robotics, automotive mechanics, facilities maintenance, equipment operators and field service technicians to name a few. If you are eager to learn and grow your technical skills while being part of a dynamic team, BOWE is the place for you!

Job DescriptionPosition: Texas Fire Extinguisher Technician DFW Fire is searching for entry level fire extinguisher technicians. We are seeking ambitious individuals looking to embark on the endless opportunities of a new career in the fire protection industry. The fire protection industry is one with a long history of stability and innovation. This position is essentially an apprenticeship. Our team would take the time to educate and mentor our apprentices through hands-on training in the workplace to prepare them to take their licensing exams, and eventually, move into a field service position upon receiving their industry license. We have immediate openings in the Dallas-Fort Worth region. What we have to offer you. We are looking for career driven and motivated individuals seeking opportunities to advance in the fire protection industry. All additional industry certifications, training/education and other related expenses are 100% covered by DFW Fire Equipmentl. We support our team in their dreams and ambitions to advance their career and achieve their career goals. We strive to create an "open communication" environment where employee input and suggestions lead to real results and company policy changes. Benefits • Highly competitive commission program, • Late model company provided service vehicle with expense card, • Company provided uniforms, • Paperless field service software and deviceJob Duties/Responsibilities:, • Perform inspections, maintenance and repair of fire and safety equipment, to include but not limited to: portable fire extinguishers, emergency lighting, panic doors, in accordance with applicable NFPA codes, state codes and regulations and manufacturer requirements., • Complete related inspection reports and other work order documents pertaining to services rendered and job status, • Perform surveys and visual inspection of customer locations in order to provide detailed information that results in job estimates and customer proposals, • Attend periodic training programs for our equipment manufacturers and will become certified under the Safety Control, LLC. name, • Communicate with the office and service manager pertaining to their schedule and progress throughout the day, • Communicate to the customer what their specific needs are as well as their findings post-inspection and prior to repair, • Maintain a professional appearance and demeanor in the workplace and on the jobQualifications:, • A valid driver's license (required), • The ability to complete and pass a criminal background check and fingerprinting, which will allow you to obtain your Texas fire extinguisher apprentice permit issued by the Texas State Fire Marshal's Office (required), • Must possess a clean driving record (required), • Basic hand tool and mechanical knowledge and experience (required)

Job Description Polk Mechanical is looking for the best and brightest in the market to join our high-performing team. As a result of our unparalleled customer service and unique offerings, our business is experiencing impressive growth. With growth comes great opportunities for those ambitious to accomplish great things. A career at Polk is not just a job but an opportunity to join a family of people who care about each other and care about their customers. It’s no wonder our business and our team are growing. Job Description Reads, understands, and interprets blueprints, drawings, floor plans, schedules, and manufacturer's specifications as they relate to mechanical piping and equipment. Responsible for assembling and installing pipe systems, pipe supports, and hydraulic and pneumatic equipment. Installs pipe for steam, heating, cooling, industrial production and processing systems, modifications, replacement, and installations on a wide variety of mechanical systems and equipment. Performs other duties and responsibilities as may be assigned by supervision. Essential Accountabilities: • Select the type and size of pipe and related materials according to job specifications., • Inspect worksites to determine the presence of obstructions and to ascertain that holes will not cause structural weakness., • Plan the installation sequence to avoid obstructions and activities of other construction workers., • Assemble and install various metal and nonmetal pipe and pipe fittings, including those made of brass, copper, lead, glass, and plastic., • Join piping utilizing threaded, caulked, wiped, soldered, brazed, fused, or cemented joints., • Knowledge of installing piping systems in a commercial construction environment., • Using hand tools, secure pipes to structure with clamps, brackets, and hangers., • Install and maintain refrigeration and air-conditioning systems including compressors, pumps, meters, pneumatic and hydraulic controls, and piping., • Test piping systems for leaks by increasing pressure in pipes and observing gauges attached to pipes to indicate leaks., • Weld aluminum, carbon steel, and stainless steel, and be versatile in Mig, Tig, and stick welding methods, • Must have experience with pipefitting in the Mechanical and HVAC Industry., • A valid Driver’s License is required, • Work within precise limits or standards of accuracy., • Familiar with cutting, bending, and welding tools and techniques., • Possess a working knowledge of the system or systems being installed; interpret plans and specifications; and visualize objects in three dimensions from plans and drawings., • Journeyman should have completed an apprenticeship or have four years of training experience in the practical installation of related systems and the usage of tools and equipment required for installation., • Ability to problem-solve, • Knowledge of trades mathematics Possess the necessary physical requirements, with or without the aid of mechanical devices, to safely perform the duties and responsibilities of this position in a timely manner including: • Lifting and carrying a minimum of 50 pounds., • Ability to traverse uneven ground conditions while maintaining balance., • Climbing stairs, ladders, and scaffolding, and working at heights., • Perform tasks requiring bending, stooping, kneeling, climbing, and walking significant distances., • Working within extreme temperature and humidity ranges. Vacation • Paid Holidays, • Career Advancement & Training Opportunities, • Technician tool account, • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401K, • Life Insurance, • Disability InsuranceCompany DescriptionTriplePoint is a high-growth, private equity–backed platform in the mechanical and industrial construction space. With a strong pipeline of acquisitions and continued expansion, we are building the industry leader in integrated construction services. Our team thrives in a high-performance, fast-paced environment where accountability, precision, and execution excellence are non-negotiable.TriplePoint is a high-growth, private equity–backed platform in the mechanical and industrial construction space. With a strong pipeline of acquisitions and continued expansion, we are building the industry leader in integrated construction services. Our team thrives in a high-performance, fast-paced environment where accountability, precision, and execution excellence are non-negotiable.

Job Description Become the trusted advisor helping pharmacies thrive! Are you ready to build lasting relationships, solve complex challenges, and guide pharmacy teams toward success? At Liberty Software, we proudly partner with pharmacies nationwide, helping them support their patients with powerful, user-friendly software. We're excited to grow our Account Management team with individuals who can deliver expert support and personalized service—acting as the dedicated point of contact for assigned pharmacy clients. Please Note: This is a non-sales, in-person, role based in our Grapevine, TX office. Responsibilities Include: • Build and maintain strong, long-lasting relationships with assigned pharmacy accounts, including owners, pharmacists, technicians, and clerks, • Serve as the dedicated point of contact for inbound calls, emails, chats, and escalated tickets from assigned accounts, • Diagnose and resolve software-related issues efficiently, escalating complex cases when needed, • Accurately document all interactions and actions in tracking software, • Provide guidance to configure software and computer settings to meet each client's unique needs, • Ensure timely and successful delivery of solutions by collaborating with internal teams, • Communicate clearly with clients about ticket status, purchases, and requests, • Assist with high-severity requests or issue escalations as needed, • Become an expert on Liberty's software suite to guide clients in best practices, • Provide onsite and web-based training of Liberty's pharmacy software as needed, • Participate in occasional on-call rotation or overtime work when assigned Qualifications: • Minimum 2 years of relevant experience required (customer service, retail pharmacy, technical support, or similar), • Pharmacy Technician certification and retail pharmacy knowledge a plus, • Bachelor's degree in business, communications, computer science, or related field preferred, • Professional, friendly, and patient demeanor essential, • Excellent verbal and written communication skills, able to engage all client levels—from pharmacy owners to clerks, • Strong multitasking, organizational, and time management skills, • Detail-oriented with strong typing and documentation abilities, • Excellent listening and critical thinking skills, • Experience with Liberty Software products is a plus Please note: This position does not involve sales or cold calling; this is a customer technical support role. Benefits Starting Day One * 100% employer-paid medical and life insurance for employees, with optional dental and vision coverage at no cost * Family coverage available with Liberty contributing 50% of the premium * Fully vested 401(k) with employer match * Employer contributions to Health Savings Accounts (HSA) * Generous paid time off and paid holidays * Tuition reimbursement and continuing education support * Adoption expense reimbursement * Dependent Care Flexible Spending Account (FSA) for tax savings on childcare * Confidential counseling resources for mental health, financial planning, and more, via Optum EAP * Fully stocked breakroom Think you've got what it takes to be the go-to problem solver? Let's talk — Apply today! #ID1 #ZR Company DescriptionLiberty Software began as an independent computer service company serving the computer needs of community pharmacies across the South. That was over 20 years ago, but we have never forgotten how to provide the service that is so important to community pharmacies. Today, we have software and services that are focused on enabling pharmacies to meet the challenges facing them. RXQ is our flagship system and is helping pharmacists across America better serve their patients. Our passion is providing technology to community pharmacies that makes their job easier. At Liberty Software we work hard to make sure our customers are satisfied and happy. To do this, we have brought together a team of individuals who are experienced with pharmacy and technology, and just as important, are friendly and helpful.Liberty Software began as an independent computer service company serving the computer needs of community pharmacies across the South. That was over 20 years ago, but we have never forgotten how to provide the service that is so important to community pharmacies. Today, we have software and services that are focused on enabling pharmacies to meet the challenges facing them. RXQ is our flagship system and is helping pharmacists across America better serve their patients. Our passion is providing technology to community pharmacies that makes their job easier.\r\n\r\nAt Liberty Software we work hard to make sure our customers are satisfied and happy. To do this, we have brought together a team of individuals who are experienced with pharmacy and technology, and just as important, are friendly and helpful.

Job DescriptionDescriptionIn Home Registered Behavior Technician (RBT) / Behavior Technician (BT)Service Areas: Dallas In Home I Schedule: Monday–Friday, 8:00 AM – 6:00 PM Why Join Apara Autism Centers? At Apara, we’re committed to making meaningful improvements in the lives of those we serve. Our supportive, compassionate, and innovative team helps children with autism reach their fullest potential — and we want you to be part of that mission. • Paid 40-hour RBT training – start your career strong!, • Clients guaranteed after training – no waiting for hours., • Evenings & weekends free – optional weekend shifts if you want extra., • Provide 1:1 ABA therapy to children with autism., • Implement treatment plans from a BCBA., • Track progress & support families. Requirements: • High school diploma (Bachelor’s in related field preferred)., • Experience working with kids., • Competitive pay + raises, • Health benefits, • Paid time off, • Professional growth in a supportive team If you’re passionate about helping kids thrive and want to work in a team where values and mission matter, apply today and start changing lives! Equal Opportunity EmployerApara Autism Centers is an Equal Opportunity Employer. We are committed to fostering a diverse and inclusive environment. Employment decisions are based solely on qualifications, merit, and business needs—without regard to race, color, religion, sex, national origin, age, disability, veteran status, gender identity or expression, sexual orientation, or any other protected status.

Job Description COMPANY OVERVIEW: CERTERRA (formerly RMA Companies) is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, CERTERRA has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. Job Summary: The CMT Soil Lab Technician is responsible for performing laboratory tests on soil, aggregate, and other construction materials to determine their properties and compliance with project specifications, industry standards, and client requirements. This role ensures accurate, timely, and reliable test results to support field operations and client needs. Key Responsibilities: • Perform laboratory testing on soil and aggregate samples (e.g., proctors, Atterberg limits, moisture-density relations, gradations, etc.)., • Follow ASTM, AASHTO, and company-specific testing procedures., • Properly label, log, and track samples in the laboratory information system., • Maintain cleanliness, organization, and calibration of lab equipment., • Accurately record data, complete test reports, and submit results in a timely manner., • Assist in preparing and maintaining quality control documentation., • Communicate with field technicians, project managers, and supervisors regarding testing needs or discrepancies., • High school diploma or equivalent (required)., • Previous laboratory or construction materials testing experience preferred but not required (training provided)., • Basic math and computer skills., • Strong attention to detail and organizational skills., • Ability to lift and move up to 50 lbs. regularly., • Primarily laboratory-based with some interaction with field staff., • May involve exposure to dust, dirt, noise, and materials under testing., • Certification opportunities (ACI, NICET, TxDOT).

Job DescriptionSalary: SERVICE & DISPATCH ADMINISTRATOR Position Title: Service and Dispatch Administrator Department: Product Support Direct Report: Service Manager Are you looking for a career in a growing industry?Wanting a competitive pay rate and career development program including training that allows you to grow your skills and pay? Join HTX Material Handling: We are a Material Handling Equipment distributor representing premium brands in the Houston market. Our company was started in 2019 and the brands we represent are global leaders. Its the perfect time to join this growing organization as we expand our presence in Texas! JOB DESCRIPTION AND PURPOSE: The primary responsibility of the Service and Dispatch Administrator is to assist the Service Manager / Coordinator in communicating with customers, sales, and product support. His/her goal must be to give outstanding service. JOB DUTIES/RESPONSIBILITIESmay include, but are not limited to: • Develop and maintain working relationships with other departments, partners, and vendors in order to improve the overall company performance., • Ensure the work order process is followed, from opening jobs through job invoicing accuracy in the work order system (ERP)., • Ensures technician write ups and field data completion is up to required standard, • Keep track of daily Work In Progress (WIP), • Monitor progress of work schedule to meet work order commitments and customer expectations., • Assist manager in assigning work to technicians, and tech schedule board., • Monitor the progress of all current and pending projects, • Consistently deliver incredible customer service experiences by offering knowledge, advice, and answering questions and concerns to both internal and external customers., • Reviews maintenance records to schedule recommended service intervals, (250 hour, 500 hour, etc. PM)., • Keep track/support reporting of KPIs regarding technicians, work orders and other projects to maximize technician productivity and service department profitability, • Assist in allocating parts expense and shop labor to machines through a work order system., • Open and manage work orders in the system to track shop and technician labor and parts usage as well as other necessary/requested information, • Support all field technicians with systems, administrative tasks or other supporting projects, • Ensure all customer information and contracts in the system are set up correctly, • Support rental activities as it relates to the service department, such as rental delivery and pickups are being set up correctly, • Support sales activities as it relates to the service department, such as PMs/CFMs are set up correctly, adding new customers/equipment, etc., • Assist with the parts department as required such as returning parts from jobs, ordering parts/look up parts if needed for service manager, assist with inventory management, etc., • Communicate with service manager any/all work order discrepancies, • Should become proficient with OEM parts lookup/service bulletins/product information, • Operate and manage incoming calls for the service department REQUIRED QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • High school diploma / G.E.D / Bachelors Degree / Other Technical training., • Minimum of 2 years of experience in a serviceadministrative role, • Valid Drivers License (possess and maintain during employment), • Must be fluent in English. Understanding of Spanish will be considered a plus, • Must be detail-oriented, able to multi-task and possess excellent time management skills, able to work under pressure, • Must have exceptional customer service orientation, • Must have solid communication and interpersonal skills, • Must have solid negotiation and problem-solving skills, • Must be able to communicate effectively both verbally and in written form to customers, technicians, and all other departmental personnel., • Job requires a willingness to learn, and offer opinions and direction in a professional manner, always displaying a cooperative attitude., • Previous dispatch and forklift experience are preferred, • Previous ERP experience desired (FieldServio) COMPUTER SKILLS: • Computer knowledge including use of Personal Computers, Tablets, and Microsoft Office (Word, Excel, Outlook and PowerPoint) The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may very probably be exposed to moving mechanical parts, fumes, or airborne particles, toxic or caustic chemicals, and outside weather conditions. The employee is frequently exposed to wet and/or humid conditions, extreme cold, and extreme heat. The employee is occasionally exposed to risk of electrical shock and vibration. The noise level in the work environment is usually medium to loud. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. If you are unable to complete the application without an accommodation, please call (832) 713-8302 for assistance. BENEFITS HTX Material Handling offers employees 100% paid Health benefits (Health, Dental, Vision, Life Insurance), and unique work environment. Also includes the following benefits: 401(k) Medical and Prescription Drug Dental Vision Holidays Vacation Sick Pay Life Insurance Jury Duty Uniforms and Safety Shoes Technician Benefit / Training Tooling Insurance Diagnostic Laptops / iPads

Job Description COMPANY OVERVIEW: Certerra is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, Certerra has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. Job Summary: The CMT Concrete Lab Technician is responsible for performing laboratory testing of concrete and other construction materials to ensure compliance with project specifications, industry standards, and client requirements. This role involves preparing and testing concrete samples, recording data accurately, maintaining equipment, and adhering to safety and quality control protocols. Key Responsibilities: • Check the concrete log for samples delivered from field technicians, • Strip, Mark and store cylinders in correct curing rooms, • Perform compressive strength testing on concrete cylinders, • Operate and maintain testing equipment in accordance with ASTM and AASHTO standards, • Accurately record and report test results in a timely manner, • Ensure lab cleanliness and proper storage of materials and documentation, • Follow all safety protocols and comply with regulatory requirements (e.g., ACI, ASTM, TxDOT), • Job site visits to pick up cylinders (if needed) Qualifications: • High school diploma or equivalent required; technical training or coursework in construction or engineering preferred, • ACI Concrete Strength Testing Technician certification preferred (or ability to obtain), • Basic understanding of construction materials and laboratory procedures, • Attention to detail and ability to follow standardized testing procedures, • Ability to lift and move heavy materials (up to 50 lbs)Must possess or be able to obtain a valid driver’s license We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

Job Description Location: Denver, CO Compensation: $33-37/ hour + Relocation About BRAVAS At BRAVAS, we transform homes into extraordinary living experiences. As the nation’s #1 luxury technology integrator, we design and deliver premium solutions - lighting, shades, A/V, networking, home automation, and more, that make life effortless, beautiful, and connected. We partner with homeowners, architects, builders, and designers on some of the most spectacular homes in the country. And we’re growing. The Role We’re looking for a Lead Technician to bring deep expertise in residential pre-wire, programming, and service. This isn’t a commercial wiring role - it’s about shaping luxury living environments and delivering flawless smart home experiences. As a Lead Technician, you’ll be hands-on in the field, guiding installs, troubleshooting issues, and mentoring technicians while working closely with project managers. You’ll set the standard for quality and precision, ensuring every detail - from pre-wire through programming - is done right the first time. What You’ll Do • Lead and execute residential pre-wire and trim-out work, ensuring projects are ready for seamless installs., • Program and configure control systems, networks, cameras, and NVRs to deliver intuitive, high-end experiences., • Perform service and troubleshooting calls with a client-first mindset., • Read and interpret residential blueprints, plans, and schematics., • Install and calibrate A/V systems, in-wall/in-ceiling speakers, and structured cabling (CAT5/6, coax, etc.)., • Serve as the point person on job sites - working with Project Managers, coordinating with trades, and clarifying client needs., • Maintain accurate job documentation and daily updates in project management software., • Mentor junior technicians, modeling best practices and craftsmanship., • Safeguard client confidentiality and ensure system/network security., • Participate in the on-call service rotation., • Residential expertise: Pre-wire, trim, and finish work experience in luxury home integration or related industry., • Strong programming skills with control systems, networks, and residential AV setups., • Service experience troubleshooting systems and solving problems quickly., • Ability to read residential construction plans and adapt installations accordingly., • Deep understanding of wiring fundamentals and construction techniques., • A strong attention to detail and pride in delivering premium-quality work., • 5+ years of residential installation and service experience, with proven programming skills., • High school diploma or equivalent; technical training or low-voltage certifications a plus., • Strong computer and job management software skills., • Valid driver’s license, clean driving record, and ability to pass a background check., • Ability to lift and carry up to 60 pounds., • Comfortable working in tight spaces and at ladder heights., • Work on some of the most spectacular homes in the country., • Join a collaborative, supportive team that values both professionalism and fun., • Competitive pay + bonus opportunities. We are an equal opportunity employer that does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. Powered by JazzHR Q94rd8wXE8

Job Description For over 40 years, Hoist & Crane Service Group has been a leader in the crane service industry. Safety is our top priority and our programs have been honored in 2014, 2015, and 2016 by the National Safety Council. Our culture strives to always operate within our 5 Marks of Safety, Integrity, Respect, Effectiveness, and Legacy. Hoist & Crane Service Group is looking for an experienced industrial technician with supervisory experience. Service Managers are responsible for the management of field operations and profitability. Service Managers work with planners in scheduling, maintaining job costs, procurement, and accounting functions. Determine the financial impacts of field operations on branch performance and work with the Branch Manager to oversee Safety, Human Resources, and Recruiting duties. Service Managers will also assist field operations with technical troubleshooting, tooling requirements, and parts availability when needed. Hoist & Crane Service Group offers competitive wages and benefits packages including: • Medical, • Dental, • Vision coverage, • Long and short term disability The qualified Service Manager candidate will be able to pass drug, alcohol, background, and motor vehicle checks and will have the following: • 5+ years of field or industrial experience, supervisory or management experience preferred, • Strong communication skills, written and verbal, • Proficient with computers, • Exceptional customer service skills, • Proven knowledge of mechanical and electrical systems, • Proven organizational skills, • Able to work independently and as a team, • Able to lift 50 pounds and sit or stand for long periods of time Must be able to pass a pre-employment drug test and background (DISA) and submit to random and annual drug testing as required.

Job Description Join the TAIT Team! About TAIT Welcome to TAIT, where we strive for excellence every day. TAIT is a nationwide leader in fuel system compliance for critical infrastructure. TAIT remains at the forefront of innovation, boasting a powerhouse team of service technicians, designers, and project managers dedicated to tank construction, testing, repair, and regulatory compliance. Joining TAIT means immersing yourself in a culture of ambition, where every challenge is an opportunity for growth and advancement. With exceptional benefits, a supportive work environment, and unbeatable work-life balance, we invite you to become a part of our journey toward excellence. Recognized as a Top Workplace since 2016, your career at TAIT promises not just fulfillment, but genuine impact in serving our communities. Your future starts here – seize the opportunity and join the TAIT team today! Position Description This position will require a background check, MVR, and physical/drug screening. The Construction Foreman position includes but is not limited to performing construction duties as needed and supervising job site personnel and subcontractors to complete the scope of work assigned. The Construction Foreman will assist in coordinating construction projects in a manner that maximizes profitability to the company, surpasses the expectations of our clients, and ensures a quality product that meets or exceeds the industry standard. This position will provide services in an efficient and timely manner and conduct business in a safe, ethical, and professional manner. Additionally, this position will act as Job Site Safety Officer and implement injury and illness prevention policy at the job site. Must be able to follow instructions and complete assigned jobs timely and safely. This position will report to the Director. Travel Requirements: This role is well suited for individuals who are comfortable with frequent travel and enjoy working in various environments and jobsites. Candidates should be adaptable, dependable, and ready to support clients across a wide geographic area. The position begins with approximately four weeks of training based out of our Richardson, TX office. During this initial period, overnight travel will be required for about 25% to 50% of the time. Following training, the role will involve overnight travel, approximately 50% to 75% of the time. During busy testing seasons, technicians can expect to be out of town for up to three weeks at a time, including some weekends, depending on client schedules and project needs. All travel-related expenses – including lodging, transportation, and a generous daily per diem – will be fully covered by the company. Essential Duties & Responsibilities • Oversee and participate in all field activities. Provide photo documentation of all phases of the day., • Be always present in the work area unless relieved by an interim Foreman approved by the Construction Manager or Project Manager., • Order materials (gravel, concrete, etc.), call-off and document rental equipment., • Inspect and inventory equipment/materials/parts at the time of delivery for damage, necessary quantities, and to ensure specifications are met., • Schedule inspections, meet with inspectors and oversee subcontractors., • Conduct and document daily tailgate safety meetings including identification of potential safety hazards in and around the work area., • Ensure all individuals within the work area are compliant with all safety requirements, ensure the work area is always clean and secure., • Report all accidents and incidents to PM or Construction Manager., • Keep the job on schedule. Discuss issues affecting the schedule with the Construction Manager/Project Manager daily., • Keep the job within allotted labor hours. Discuss overtime hours with the Construction Manager/Project Manager prior to implementation. Complete and submit daily logs., • Obtain and submit installation/operating instructions for new equipment installed to PM., • Complete and submit warranty documents on new equipment installed to PM, and submit detailed as-built drawings to PM.Minimum Work Experience & Requirements, • 3-5 years related experience in commercial petroleum construction installation/supervision., • ICC UST Install/Retrofit, ICC UST Removal and ICC Service Technician and Veeder Root certifications., • Excellent judgement and ability to deal with changing field conditions and requirements., • 24 or 40-hour HAZWOPER certificate or current 8-hour refresher courses, • Valid Driver’s License required., • Microsoft Office proficiency (Outlook, Teams, Word)Additional Requirements, • Completion of background check, MVR and physical/drug screening., • Ability to speak clearly & professionally to communicate with clients & team members., • Ability to drive a vehicle to job sites and ability to drive extensive distances, up to 1000 miles per week., • Occasional out-of-town work will be required., • Ability to stay organized and maintain good housekeeping practices., • Ability to read and interpret design plans., • Ability to drive/haul trailer to and from job sites., • Ability to read and interpret machine diagnostic reports., • Ability to walk on job sites that may be dirt, cement, asphalt, uneven concrete, etc. TAIT invests in you by providing a comprehensive compensation and benefits program along with the opportunity for professional growth and development. Our benefits package includes valuable and affordable options for health, dental, vision, employer paid life insurance, 401(k) with match, generous paid time off and other supplemental benefits. TAIT’s core value is its culture of kindness. With this, you’ll find a family-oriented environment and flexibility to manage work and life with a rewarding career. Here are some benefits you can find when you join the TAIT Team: • Flexible Work Schedule Options - Remote, Hybrid, In-Person, • Medical options including PPO and HDHP with Health Savings Accounts (no extra charges for spouse or dependent coverage), • Dental Plans with little to no deductible, • Vision PPO plan that’s accepted widely from local offices to large retailers, • Company paid Life Insurance, • Voluntary Life, Accident and Critical Illness plans, • Dependent Care and Flexible Spending Accounts, • Employee Assistance Program, • Retirement plan 401(k) with employer match, • Paid time off to relax and recharge with vacation, holidays, and sick time., • Annual memberships with Strava and Headspace for additional health and wellness benefits, • Maternity and Paternity leave time options to care for the newest little family members, • Support for professional growth and development., • Corporate Lodging Program (CLC) TAIT is an equal opportunity employer, dedicated to a policy of non-discrimination in employment on any basis including race, color, age, sex, sexual orientation, gender identity, religion, national origin or any other legally protected status. Consistent with the Americans with Disabilities Act, the company will make reasonable accommodations to assist in the application process upon the request of an applicant. No question on this application is intended to secure information to be used for discriminatory purposes. California Applicants - view the CA Privacy Notice here before submitting your application. Powered by JazzHR H0vF0pNX52

Job Description Maintenance Supervisor (Multi-family Apartment Industry) JOB BRIEF: The Lead Maintenance Technician is responsible for maintaining the physical integrity of the community at all times. This involves ensuring a well-maintained living environment for residents, visitors, and staff. It is the Senior Maintenance Technician‘s duty to anticipate, identify, and correct any and all problems involving the property maintenance operation and to implement procedures that will prevent such problems. An effective maintenance program is essential in order to: • Maintain an orderly environment. • Cultivate resident satisfaction. • protect the owner’s investment DUTIES AND RESPONSIBILITIES • Conduct all business in accordance with company policies and procedures, state and federal laws; e.g., OSHA, ADA, Fair Housing, etc. RESIDENT SERVICE GREET EVERY RESIDENT YOU SEE, EVERY DAY, ALL DAY IN A POSITIVE WAY • Perform maintenance tasks personally or delegate to assistants, as appropriate. Oversee and occasionally inspect work performed by assistants., • Institute and management system for handling resident service requests, in conjunction with the Manager. Correct situations within 24 hours when possible., • Schedule maintenance personnel in conjunction with the Manager so that maintenance is available for emergency purposes, 24 hours a day, seven days a week. PREVENTIVE MAINTENANCE/SAFETY • Conduct regularly scheduled safety meetings with the entire staff; maintain and communicate HAZCOM standards. Keep MSDS sheets current and readily accessible. Maintain thorough knowledge of pertinent laws and EPA and OSHA regulations governing property storage and management of hazardous materials, including solvents, flammables, acoustics, and refrigerants., • Must be aware of the condition of physical property throughout the community and immediately correct unsafe conditions; e.g., broken gates, gates leading to the pool, broken steps, open holes, broken/burned out exterior lights., • Maintain accurate records regarding preventive maintenance, service requests (received and completed), expenditures, apartment make-ready status, work-in-progress, etc., • Schedule and perform minor and routine maintenance on all appropriate equipment on a regular basis. Inspect and maintain all tools in excellent condition., • Indoctrinate and assist in the development of all subordinate maintenance staff. Instills a “safety first’ attitude not only with maintenance assistants but with all staff., • Instruct staff on proper use and guidelines for wearing safety items. GENERAL • Diagnoses and performs minor and routine maintenance/repair involving the following daily., • Electrical and plumbing (including water lines). • A/C and heating systems. • Appliances (when applicable). • Water irrigation systems. • Stairs, gates, fences, patios, railings. • Tile, carpet, flooring. • Roofing, gutters, fasteners. • Interior/exterior lights. • Fireplaces, ceiling fans., • Gas fixtures and appliances (where applicable). • Shutters, doors, cabinets, windows, sliding glass doors. • Boiler, gas and electric, hot water heaters. • Door locks, P.O. boxes, and locks. • Security systems (where applicable). • Ceiling leaks. • Walls. • Pool areas, tile, Jacuzzi, pool furniture, pool safety equipment, and pool equipment., • Ensure that all make-ready repairs and services are completed correctly and on schedule., • Report all major repairs and requisitions to the Manager prior to any expenditure of funds., • Change locks and make keys., • Remove and transfer heavy appliances and equipment from storage area to apartment (or vice versa) as circumstances warrant. Assist in moving abandoned furniture, appliances, etc., to a dumpster when necessary., • Maintain adequate inventory of spare parts and maintenance materials to handle most common repairs and situations., • Identify all utility meter cut-offs, apartment and fixture cut-offs, sewer cleanouts, and prepare maps indicating the same., • Perform work area clean-up and safety-related duties., • Ensure that storage areas remain locked when not in use., • Assist in keeping grounds neat and free of litter. Rake, sweep, shovel as circumstances warrant., • Perform any additional duties assigned by Manager or Property Supervisor. QUALIFICATIONS Position requires at least 5 years experience in property maintenance or equivalent field. EPA Universal Certification and HVAC Certification. Equipment Requirement: Required to wear employer-supplied back support belt, goggles when working with specific equipment, masks and gloves, and other safety equipment as tasks dictate. Comply with all MSDS Warnings and Precautions. Adhere to all OSHA Regulations. • Ownership of personal tools Required to complete standard repairs., • Work Hours: 40 hours per week. Weekends as circumstances warrant; on-call on a rotating basis and for emergencies., • Strong leadership and communication skills required., • Equipment/Machinery/Tools: An employee in this position must be knowledgeable and skilled in the safe use and maintenance of the following tools:, • Hand Tools: Various wrenches, hammers, grips, saws, sledgehammers, snips, posthole diggers, etc., • Power Tools: Wrenches, grinders, sanders, drills, saws, etc., • User-Moved Aids: Wheelbarrows, dollies, hand trucks, buckets, hoists, jacks, step ladders, full ladders, double ladders., • Mech. Equip.: Motors, pumps, compressors, blowers, electric and hand power augers, etc. • HIGH. Must be able to apply principles of logical thinking to define problems, collect pertinent data, establish facts, draw valid conclusions and initiate an appropriate course of action. Must effectively convey ideas, images and goals to a diverse group of personalities. TESTING Personal Assessment, Background, and Drug screening required. COMPENSATION: • Competitive pay, • Medical, • Dental, • Vision

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description Allied Universal® is hiring a Director of Sales. The Director of Sales will spearhead regional sales strategy in the electronic security and converged solutions sector. Responsibilities include leading a team to generate new sales and revenue, covering a range of solutions from access control to artificial intelligence. The Sales Director will recruit, hire, and coach the sales team, utilizing prior industry insight to drive success. • Candidates must be local or within a commutable distance to Carrollton, TX; this role requires onsite presence. RESPONSIBILITIES: • Sales team leadership and development: collaborate with the regional management team to lead, coach, train, and develop sales teams for both Enterprise and Commercial customers; mentor and coach sales professionals, supporting activities in assigned vertical markets and complex negotiations, • Sales strategy implementation: collaborate with the Vice President of Sales Operations to implement and drive adoption of sales tools, training, and standards within the sales team; provide strategic direction to help the assigned region achieve booking and business development targets, • Customer engagement: attend customer-facing meetings with sales professionals, adding insight and strategic coaching in a sales environment; maintain thorough knowledge of the industry, structure, trends, and issues to understand customer business goals and requirements, • Account development and capture management: assist field sales teams in developing existing customer accounts and relationships, examining the customer's business, and finding the strategic impact of offerings; drive collaboration and provide capture management on strategic deals, including cross-functional team coordination, customer presentations, and price setting, • Sales planning and pipeline management: develop and monitor sales account plans, considering market conditions, customer needs, and competitive activity; conduct weekly pipeline reviews with sales professionals to ensure a diverse and robust pipeline meeting assigned sales goals, • Business relationship cultivation: cultivate effective business relationships between sales professionals and customers to communicate the full scope of Allied Universal Technology Services' solutions; establish strong sales practices with the team to consistently meet and exceed company and regional sales goals, • Current driver's license if driving a company vehicle, • Must possess one or more of the following:, • Bachelor's degree plus at least five (5) years of technical sales experience in a related field selling to commercial end users, • Associate's degree in with a minimum of seven (7) years of technical sales experience in a related field selling to commercial end users, • High School diploma with a minimum of ten (10) years of technical sales experience in a related field selling to commercial end users, • Minimum of three (3) years of management experience, • Skilled in hiring and developing sales teams for superior results, • Proficient in using Salesforce.com for metrics-driven reporting, • Experienced in overseeing key sales activities and strategic selling techniques, • Exceptional organizational and communication skills, • Collaborative leadership with problem-solving ability, • Demonstrated strong networking experience and drive to position Allied Universal® Technology Services as an industry leader, • Serve as an industry subject matter expert with comprehensive knowledge of organizational business practices and challenges, • Ability to build strong internal relationships at all organizational levels and manage effectively under difficult service delivery timeframes; excellent oral and written communication skills, • Dedicated to high-quality customer service and integrity, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401(k)plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-BL Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1492975