Geotechnical engineer jobs in New York, New YorkCreate job alerts

Job DescriptionDescription: KSE is a mid-size construction management and engineering firm ranking in the ENR Top 100 for CM and ENR Top 500 for design services. With seven offices across four states (NY, NJ, PA and CT), the firm has been providing transportation and public infrastructure construction services for more than three and half decades. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KSE is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Geotechnical Field Engineer Reports: Geotechnical Manager Technical Responsibilities: • Perform geotechnical field investigations, explorations, geologic reconnaissance, and site mapping., • Prepare geotechnical field boring logs, soil and rock sampling, and field permeability testing., • Support geotechnical laboratory testing and analysis., • Perform basic engineering calculations, data interpretation, and technical analysis., • Assist in preparing geotechnical reports and project documentation., • Coordinate with subcontractors in the field to complete scope-of-work activities., • Travel to field assignments throughout NJ, NY, PA, and CT; occasional overnight stays may be required., • 0 to 3 years of experience as a Geotechnical Field Engineer., • Bachelor’s degree in civil engineering, Geotechnical Engineering, Geology, or a related field, • Green Infrastructure project experience and permeability testing is a plus, • Previous internship experience a plus., • Engineer-in-Training (EIT) certification – plus., • OSHA 10-hr or 40-hr HAZWOPER training – plus., • Experience with RSLog or gINT– plus., • Previous internship or field experience in geotechnical engineering – plus., • Ability to work independently and as part of a team., • Reliable transportation to travel between job sites and office/lab (mileage, tolls & parking reimbursed). Physical & Work Environment Requirements: • Ability to sit, stand, walk, climb, kneel, crouch, crawl, grasp, reach, push/pull, and perform repetitive motions as needed for field tasks., • Frequently lift and/or move up to 35 lbs. occasionally up to 75 lbs., • Visual acuity required for data analysis, computer use, reading, and site inspections., • Outdoor work performed 50–90% of the time, often on uneven terrain and in varying weather conditions., • Exposure to outdoor elements including insects, plants, animals, and environmental temperatures typical of the region., • Occasional exposure to hazards such as moving mechanical parts, vehicles, electrical systems, heights, scaffolding, or chemicals., • Daily travel ranging from 1 to 3 hours depending on project location; overnight travel may be required. Schedule: • Sites may require commute as long as 1 hour to 3 hours of driving. Sometimes overnight stay for the duration of the project., • The field inspections/visits are dictated by construction schedules and could include early morning or late evening timing at the project site., • Ability and willingness to work alternate hours, to include overnight hours as required by the project specific requirements., • The employee is subject to both inside and outside environmental and climate conditions, • The employee is expected to perform approximately 50 to 90 percent of their work week outdoors with the remaining time in the office. Outdoor work frequently includes walking on uneven surfaces in all types of weather conditions and may have exposure to animals, insects, plants, etc., • The employee is subject to hazards such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to various heat/cold temperatures typical of the region or exposure to chemicals., • Must have a reliable form of transportation to travel between job sites and the office/lab with equipment and/or samples. Miles, tolls, and parking reimbursed. What We Offer: • In-house Safety Training and free PPE to field staff., • Dedicated mentorship program., • Learning and Development initiatives., • Purpose driven opportunity to work on exciting infrastructure and sustainability projects building America., • Inclusive culture celebrating diversity., • Health Insurance Benefits with HSA option., • Disability, Life Insurance, and 401K Retirement Accounts., • Paid Vacation and Sick Time, Paid Holidays., • Tuition Reimbursement., • Career Advancements., • Company Holiday Party, Company Summer Outings, Friday Breakfast, Monthly Heritage Celebration Lunch, Lunch & Learn Programs. Pay Transparency: Base salary is $55,000 to $70,000 per year. Base salary is only one part of KS Engineers total compensation, which includes an annual discretionary bonus. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job DescriptionJob Description Hours: Full-Time 35 Hours Work Location: 30-30 Thomson Avenue, LIC, NY 11101 Only candidates who are permanent in the Administrative Engineer title or those who are reachable on the DDC promotional list (exam #1506), or the open-competitive list (exam #1122) may apply. Please indicate a copy of your Notice of Result card or indicate if you are already permanent in the title. If you do not meet the previously mentioned civil service criteria, you will not be considered for an interview. The NYC Department of Design and Construction, Division of Infrastructure is currently seeking a Geotechnical Engineer to join the Engineering Services – Specifications team. Under the supervision of the Director, the successful candidate will evaluate the appropriate and most cost-effective foundation support system, and the bearing capacity of shallow and deep foundations. Other key responsibilities include performing geotechnical studies/projects in subsurface investigations; soil/foundation engineering; pile analysis and design; retaining walls; bridge structures; settlement analysis; lateral earth pressures; and slope stability. Additionally, the Geotechnical Engineer will perform forensic engineering; site investigations; write reports; and provide geotechnical engineering support during construction. Authorization to work in the United States is required for this position. NYC Department of Design and Construction does not provide sponsorship for international employees for visa applications, extensions, or status changes, including STEM/OPT visas. Applicants are responsible for ensuring that they meet all qualifying requirements for this position, at the time of application. All applicants, including City Employees: Please go to NYC Government Jobs | Explore Careers | City of New York, go to Search for Open Jobs, and type in the Job ID # listed above. Submit job application as prompted. Do not apply via Employee Self-Service (ESS), e-mail, mail, or fax your resume to DDC directly. ADM ENGINEER (NON MGRL) - 1001A Qualifications 1. A valid New York State License as a Professional Engineer., 2. Six (6) years of full-time satisfactory experience in chemical engineering, civil engineering, electrical engineering, environmental engineering, mechanical engineering, or plan examining work, at least two (2) years of which must have been in an executive, managerial, or administrative capacity. Additional Information The City of New York is an inclusive equal opportunity employer committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, veteran status, gender identity, or pregnancy.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Plans, coordinates, and institutes functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This is a transitional position for someone with the required field experience and/or education to gain project engineering experience in a supervised manner prior to advancing into the Project Engineer role. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Solves complex problems and calculations, using engineering formulas and skills, • Evaluates research by others and writes reports, • Assists the Project Engineer in the preparation of proposal estimates of time and expenses required to complete the project, • Assists the Project Engineer in scheduling staffing requirements for field projects, • Assists the Project Engineer in supervising and instructing, as needed, the responsibilities of field personnel on projects assigned to them, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Participates in the integration of technical activities, • Evaluates and presents changes for design, specifications, drawing releases, reports, etc to the Project Engineer and /or Project manager for approval, • Prepares interim and completion project reports, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Performs site inspection to monitor progress/conformance to specs and procedures, • Designs portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • Plans schedule of research according to company’s or contracting organization’s timetable and establishes daily or weekly routines necessary to meet project timetable, • Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project, • Supervises field work and performs field work when needed, • Establishes work plan and staffing for each phase of project and arranges for recruitment or assignment of project personnel, • Confers with project staff to outline workplan and to assign duties, responsibilities, and scope of authority, • Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget, • Supervises and delegates assignments to staff, • Oversees staff’s daily activities to ensure it is correct and complete, • Reviews status reports prepared by project personnel and modifies schedules or plans as required, • Prepares project reports for management, client, or others, • Confers with project personnel to provide technical advice and to resolve problems, • Coordinates project activities with activities of government regulatory or other governmental agencies, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in civil engineering with a minimum of 3-5 years of field or related experience where a PE license counts towards that related experience, a bachelor’s degree in a related field, and demonstrates ability to meet the requirements of the job as set forth in this description. Previous construction experience is preferred., • Professional Engineer (PE) license is preferred or have the ability to become licensed within 2 years of being in this position., • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE) preferred or have the ability to become licensed within 2 years of being in this position., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% up to 75% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $90,000–$120,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned. · Makes calculations, using engineering formulas and skills · Instructs drafters how to reduce designs into completed drawings · Conducts routine geotechnical engineering laboratory checks · Leads concrete and rebar inspection testing · Performs research and writes reports · Prepares samples of unapproved materials for laboratory testing · Uses computer to run standard programs to solve engineering problems · Performs routine laboratory tests to determine various design parameters · Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements · Develops and maintains a schedule and budget for the assigned engineering project · Provides reports on the status of project milestones and adjusts schedules accordingly · Controls expenditures within limitations of project budget · Identifies project staffing requirements and coordinates staffing with supporting organization managers · Coordinates preparation and delivery of project deliverables, design documents, and bid packages · Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications · Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems · Prepares interim and completion project reports · Provides status and progress reports to customer, project team, and management · Classifies soils according to standard types · Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings · Prepares geologic reports and maps, interprets research data, and recommends further study or action · Conducts or participates in environmental studies and prepares environmental reports · Directs drilling of exploratory borings and wells · Oversees installation of monitoring wells in accordance with state and federal requirements · Collects or supervises collection of soil and groundwater samples for analysis of chemical composition · Determines direction of groundwater flow based on review of historical records and site specific data · Determines the nature and extent of contamination in soil and groundwater at environmental sites · Participates in decision making regarding research priorities and provides information on feasibility of prospective projects Supervisory Responsibilities This job has some supervisory responsibilities. Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations. Education and/or Experience Bachelor’s degree in Civil Engineering (or applicable Engineering Degree) with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred. Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements. Certificates, Licenses, Registrations 40-hour OSHA HAZWOPER certification Registered Professional Engineer (PE) preferred or have the ability to become licensed within 6 months of being in this position ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification Valid Driver’s License and possess reliable transportation to access job sites Language Skills Proficient in communicating both verbal and written in the English language. Proficient in communicating both verbal and written in the English language. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe. Tools/Equipment Position requires ability to use tools such as a lump hammer, shovel, hand auger, Nuclear Density Gauge. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Base salary $55,000–$80,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description About us! Vanderweil Engineers is a top-ranked national engineering firm specializing in Power, MEP/FP and technology systems for a wide range of market sectors. In our 75th year in operation with a staff of 500+ located across nine offices, we are proud to be one of the leading independently owned engineering firms in the country. If you are looking for an opportunity to break away from your silo to grow your career while working on high profile projects, we are looking for you. Take a leadership role and help shape the future of our growing Power Delivery Group. Join us to do the best work of your career as a Lead Substation Structural Engineer with our growing Power Group team at our headquarters in Boston, MA (Seaport District) or New York, NY, or Philadelphia, PA (hybrid schedule). What You will Achieve: With our continued growth in the Transmission & Distribution sector, we are seeking a Lead Substation Structural Engineer. Work on critical infrastructure projects and contribute to the structural integrity of high-voltage substations nationwide. Our Power Group provides full-service engineering and design solutions for utility, institutional, and commercial clients across the U.S., with a strong focus on reliability, sustainability, and innovation. We offer clear paths for professional growth, leadership development, and the opportunity to directly impact our success as we expand into new markets and technologies. Some of your responsibilities include the following: • Lead the structural engineering and design of both transmission and distribution substations, including new builds, expansions, and retrofits., • Perform and review structural analysis and design using software such as RISA-3D, STAAD.Pro, L-Pile, RAM Structural System, CSI SAFE, or MathCAD., • Develop and oversee the production of structural construction documents, including detailed specifications, plans, and calculations for steel, concrete, and foundation systems., • Evaluate existing structures for loading capacity, retrofit needs, and compliance with current codes., • Coordinate with geotechnical teams for interpretation and application of soil data into foundation design., • Support and lead field investigations, constructability reviews, and site assessments., • Review and approve delegated design work from subconsultants or junior engineers, ensuring compliance with engineering best practices and project requirements., • Mentor and provide technical leadership to junior engineers, designers, and drafters. Essential Skills & Requirements: • 8+ years of structural engineering experience,, • 5+ years in substation structural design for transmission and/or distribution facilities., • Bachelor’s degree in Civil Engineering, • PE license, • Designing and analyzing steel structures, equipment foundations, site civil systems for substations., • Proficient with structural software like STAAD.Pro, RISA-3D, RAM Structural System, L-Pile, CSI SAFE, MFAD, or MathCAD. Our Flexible & Hybrid Work Culture: We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. Our wellness programs prioritize our team members’ physical and behavioral health. We are an equal opportunity employer committed to diversity in the workplace. This position has a salary range of $110,000 to $160,000 and is commensurate on years of experience, licensure, skill sets, location, and education. Reach out to us to discuss total rewards and compensation package.

Job Description The MTA’s Second Avenue Subway project is a $7.7B expansion that will extend the Q Line from 96th Street into East Harlem, adding three new ADA-accessible stations at 106th, 116th, and 125th Streets. This long-awaited project will restore rapid transit access to a community underserved for decades, ease overcrowding on the Lexington Avenue line, and cut commute times—delivering a transformative impact for East Harlem residents and the city as a whole. This position will support the $2B design-build contract for Phase 2 that includes two tunnels that will allow the development of two new subway stations in New York. Led by Connect Plus Partners, a joint venture between FCC Construction and Halmar International, the project brings together extensive experience in large-scale infrastructure, complex tunneling, and urban transit construction. POSITION SUMMARY The Construction Quality Engineer (CQE) is responsible for implementation of the Quality Plan and oversight of all quality issues, ensuring that all aspects of the tunnel meet the required contractual, technical, quality and regulatory standards focusing on quality assurance and control throughout the construction process. He must ensure compliance with the Construction Quality Management Plan (CQMP), Inspection and Test Plans (ITPs), released-for-construction (RFC) drawings and applicable standards. This position must operate independently from production and supervision teams to maintain objectivity and integrity in quality program processes. RESPONSIBILITIES • Develop and implement quality assurance plans ensuring that all construction activities comply with project specifications and standards. This includes preparing method statements, inspection and test plans, and quality management policies and procedures., • Evaluate and document the quality of tunnel construction performed by the construction team, suppliers, and/or subcontractors, ensuring compliance with project requirements, RFC and As-Built drawings, and specifications., • Review and assess the quality of material used in construction, ensuring they meet the required specifications. This involves conducting inspections and tests on materials before they are used on-site., • Maintain comprehensive QA/QC documentation, including certificates, calibration records, test results and non-compliance reports. Ensure that all documentation is accurate and readily available for audits and inspections., • Verify that equipment used in the construction process is fit for purposes, properly calibrated, and maintained as required., • Identify and report non-compliant construction work or supplied products upon discovery and monitor the disposition of non-conformances., • Control the further processing, delivery, installation, or use of non-compliant construction work or supplied products until the issues are corrected, controlled, or removed., • Coordinate and notify all quality activities as indicated in the ITPs with Quality team, and other relevant parties, including contracting authorities, utilities, and governmental authorities., • Coordinate with subcontractors and the client and ensure ITP Witness/Hold points implementation as per contract and technical specification requirements., • Ensure that inspections and tests are performed according to approved ITPs, and that all quality records and documents are complete, accurate, and meet applicable requirements., • Review test packages and relevant documentation prior to conducting inspections and testing., • Works closely with construction teams, project managers and subcontractors to ensure quality standards are met. This includes providing feedback and guidance on quality-related issues and facilitating training in the quality management system., • Perform regular audits and inspections to monitor compliance with quality standards and identify areas for improvement. Generate reports on quality trends and non-conformances issues, proposing corrective actions as necessary., • Organize quality toolbox talks and lessons learned and maintain documentation of such. Prepare and maintain quality records related to their assigned portion of work., • Perform other duties as requested by the Construction Quality Manager and the project’s Quality Manager. EDUCATION AND QUALIFICATIONS • Degree in civil engineering, construction management, geotechnical engineering or similar industry., • A minimum of 15 years of experience in heavy civil projects, tunnel, transit, infrastructure or similar projects in scale and complexity., • Demonstrated relevant experience in full-time Quality Assurance and/or Quality Control management and with design-build contracts., • Current certification in Quality Management from the American Society for Quality (ASQ) or the American Society of Civil Engineers or equivalent experience or education is preferable., • Certification and/or training in quality control inspection and testing, particularly in transit construction projects., • Certification and/or documented training in construction quality assurance and quality control., • Familiarity with ISO 9001:2015 principles in quality systems and quality program implementation. WORK ENVIRONMENT • Work is primarily performed at active construction sites, including underground and surface environments., • Must be able to stand, walk, and climb for extended periods; navigate uneven ground, scaffolding, and ladders; and work around heavy equipment., • Exposure to noise, dust, vibration, confined spaces, and varying weather conditions is common., • Requires regular use of personal protective equipment (PPE), including hard hats, safety boots, high-visibility clothing, and eye/ear protection., • Ability to perform site inspections, monitor field activities, and respond quickly to safety or operational issues in physically demanding conditions., • Flexibility to work extended hours, nights, weekends, and rotating shifts as project demands require., • Occasional office-based work is required for reviewing documents, preparing reports, and coordinating with project management teams. FCC is dedicated to creating an inclusive workplace where diversity is valued and respected. As an Affirmative Action/Equal Opportunity Employer, we do not discriminate against any applicant for employment or employee because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetics, creed, veteran status, military status, or any other characteristic protected under Federal, State, or local laws. Reasonable accommodations will be provided to qualified individuals with disabilities in accordance with applicable law. If you need a reasonable accommodation during the interview process, please contact our HR team.

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at and True-Environmental.com to discover the full scope of our capabilities. Matrix is seeking a NJ/NY Engineering Development Lead to drive business development and project execution in central and northern New Jersey and New York. This is a high-impact, entrepreneurial role for a seasoned civil, structural and/or geotechnical engineering professional who thrives on building client relationships, leading technical delivery, and cultivating teams. You’ll be a visible leader in the region, shaping infrastructure projects, mentoring talent, and expanding Matrix’s footprint. Ready to shape the future of New Jersey and New York’s infrastructure? Apply now at or reach out directly to our recruitment team. Let’s build something extraordinary—together.What You'll Do • Market Leadership & Business Development, • Lead strategic growth in NJ and NY by identifying opportunities and cultivating relationships with public agencies, municipalities, developers, and consultants, • Drive proposal development and pursuit strategy for infrastructure, land development, and municipal projects, • Represent Matrix at industry events and client meetings across NJ and NY metro, • Champion a client-first mindset, ensuring long-term partnerships and repeat business, • Entrepreneurial Spirit & Team Building, • Bring an entrepreneurial approach to expanding services and market share, • Build and inspire high-performing teams through mentorship, collaboration, and shared purpose, • Foster a culture of employee development, ownership, and innovation, • Project Leadership & Technical Delivery, • Serve as Project Manager for civil engineering projects you help bring in, • Oversee design, permitting, and construction phases with a focus on quality and client satisfaction, • Collaborate with multidisciplinary teams across Matrix’s service lines, • Technical Excellence & Mentorship, • Act as a technical leader in civil/site engineering, stormwater, grading, and utility design, • Guide junior staff and contribute to a culture of continuous improvementMinimum Qualifications, • Bachelor’s degree in Civil Engineering or related field (Master’s a plus), • Professional Engineer (PE) license required, • 10+ years of experience in civil/site engineering and project management, • Proven track record as a seller-doer with strong client relationships in NJ and/or NY (NYC agency experience and relationships a plus, as well as regional and national client base), • Deep understanding of state, municipal, and county regulations

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Supervising Project Engineer to join our team. The successful candidate will manage aspects of important projects including proposal development, budget, project execution, scheduling and client communications. Participates in conducting engineering investigations and planning work by completing well-defined tasks. These tasks may include collection and analysis of data using established procedures, performance of routine calculations, and participation in evaluating the feasibility of alternate solutions. Requirements/Responsibilities • Bachelor's degree in civil engineering (master's preferred) and a Registered Professional Engineer in the State of New York required., • Minimum of 5 years of experience., • Demonstrated ability to manage multi-discipline projects and utilize technical support staff., • Ability to develop and maintain strong relationships with clients, must possess the desire to develop new clients and expand the services of existing clients while maintaining strong billability., • Record and report all work performed, including deviations from approved work plans, contract documents, poor quality of work, unforeseen conditions, unsafe conditions, etc.;, • Interface with Senior Inspector to maintain and track various logs, reports and field records for the designated area of responsibility., • Monitor the contractor’s timely execution and quality of work., • Interact with contractor’s superintendent for on-site resolution of construction issues., • Review and proof contractor submittals and respond to RFIs., • Prepare proposal cost estimates, technical approach and scope of work write-ups., • Perform review of responses to RFPs for project subcontracts, materials and equipment., • Prepare thorough documentation of site activities, monitor project schedules and subcontractor performance and correct issues when needed., • Assist with preparing project reports, correspondence and cost tracking/status., • Provide technical assistance to engineering oversight staff as required.Qualifications, • Experience in managing large field programs as a team leader is a plus., • Geotechnical analytical and design experience., • Technical report writing skills., • Project and safety management., • Field documentation skills., • Excellent reading, writing, and verbal communication skills., • Strong computer skills., • Field and office assignments, as required.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation Powered by JazzHR zgRjAUQbgd

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Plans, coordinates, and institutes functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This is a transitional position for someone with the required field experience and/or education to gain project engineering experience in a supervised manner prior to advancing into the Project Engineer role. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Solves complex problems and calculations, using engineering formulas and skills, • Evaluates research by others and writes reports, • Assists the Project Engineer in the preparation of proposal estimates of time and expenses required to complete the project, • Assists the Project Engineer in scheduling staffing requirements for field projects, • Assists the Project Engineer in supervising and instructing, as needed, the responsibilities of field personnel on projects assigned to them, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Participates in the integration of technical activities, • Evaluates and presents changes for design, specifications, drawing releases, reports, etc to the Project Engineer and /or Project manager for approval, • Prepares interim and completion project reports, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Performs site inspection to monitor progress/conformance to specs and procedures, • Designs portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • Plans schedule of research according to company’s or contracting organization’s timetable and establishes daily or weekly routines necessary to meet project timetable, • Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project, • Supervises field work and performs field work when needed, • Establishes work plan and staffing for each phase of project and arranges for recruitment or assignment of project personnel, • Confers with project staff to outline workplan and to assign duties, responsibilities, and scope of authority, • Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget, • Supervises and delegates assignments to staff, • Oversees staff’s daily activities to ensure it is correct and complete, • Reviews status reports prepared by project personnel and modifies schedules or plans as required, • Prepares project reports for management, client, or others, • Confers with project personnel to provide technical advice and to resolve problems, • Coordinates project activities with activities of government regulatory or other governmental agencies, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in related field with a minimum of 3-5 years of field or related experience where a LSRP license counts towards that related experience, a bachelor’s degree in a related field, and demonstrates ability to meet the requirements of the job as set forth in this description. Previous construction experience is preferred., • Licensed Site Remediation Professional (LSRP) license is preferred or have the ability to become licensed within 2 years of being in this position., • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE) preferred or have the ability to become licensed within 2 years of being in this position., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% up to 75% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $85,000–$115,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Company Description Geotechnical Engineering Services, P.C. (GES) is a leader in geotechnical engineering, serving the New York City Metropolitan Area and other locations including New Jersey, Connecticut, Pennsylvania, Virginia, and Florida. With over 20 years of experience, GES has earned a reputation for reliability and excellence in consulting services for projects ranging from residential developments to complex infrastructures like the Second Avenue Subway. The company works with high-profile clients such as the New York City School Construction Authority, Con Edison, and Verizon. GES provides tailored solutions through subsurface investigations, geotechnical recommendations, detailed reporting, and construction inspections, ensuring quality, safety, and timely project completion. Role Description This is a full-time hybrid role for a Geotechnical Engineer based in the New York City Metropolitan Area, with a mix of on-site and remote work. Applicants should be flexible to work on occasional weekends if the site requires it. Typical duties include: • Preparation of Daily Field Reports, • Design of Support of Excavation and Underpinning and of AutoCAD Drafting of SOE Drawings, • Analysis of Retaining Walls, including site visits, calculations, sketches, and reports concerning the safety of existing retaining walls., • Perform special inspection of piles, support of excavation, underpinning, excavation and backfilling etc., • Collaborate with design teams, engineers, and clients to address project-specific needs is an integral part of the role., • Drafting of Geotechnical Investigation reports, • Inspection of geotechnical borings, dynamic cone penetrometer probes, and test pits., • Foundation Design, including piles, SOE walls, retaining walls., • Knowledge and experience in Site Investigation and subsurface data collection, • Strong understanding of Soil Mechanics and Geotechnical Engineering principles, • Expertise in Engineering Geology and its application in construction projects, • Proficiency in Foundation Design practices for various project scales, • Strong analytical, problem-solving, and communication skills, • Bachelor's degree in Geotechnical Engineering, Civil Engineering, or related field; advanced degree is a plus, • Experience with soil analysis software and geotechnical design tools, • Ability to work in both field and office environments, with a willingness to travel locally, • Professional Engineer (PE) license or working towards obtaining the PE is a plus Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Pay: $75,000.00 - $95,000.00 per year Work Location: Multiple locations Company DescriptionGeotechnical Engineering Services, P.C. (GES) is a leader in geotechnical engineering, serving the New York City Metropolitan Area and other locations including New Jersey, Connecticut, Pennsylvania, Virginia, and Florida. With over 20 years of experience, GES has earned a reputation for reliability and excellence in consulting services for projects ranging from residential developments to complex infrastructures like the Second Avenue Subway. The company works with high-profile clients such as the New York City School Construction Authority, Con Edison, and Verizon. GES provides tailored solutions through subsurface investigations, geotechnical recommendations, detailed reporting, and construction inspections, ensuring quality, safety, and timely project completion.Geotechnical Engineering Services, P.C. (GES) is a leader in geotechnical engineering, serving the New York City Metropolitan Area and other locations including New Jersey, Connecticut, Pennsylvania, Virginia, and Florida. With over 20 years of experience, GES has earned a reputation for reliability and excellence in consulting services for projects ranging from residential developments to complex infrastructures like the Second Avenue Subway. The company works with high-profile clients such as the New York City School Construction Authority, Con Edison, and Verizon. GES provides tailored solutions through subsurface investigations, geotechnical recommendations, detailed reporting, and construction inspections, ensuring quality, safety, and timely project completion.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This is a transitional position for someone with the required field experience and/or education to gain project engineering experience in a supervised manner prior to advancing into Project Engineer role. Essential Duties and Responsibilities include the following. Other duties may be assigned. · Designs major portions of an assigned project · Solves complex problems and calculations, using engineering formulas and skills · Evaluates research by others and writes reports · Assists the Project Engineer in the preparation of proposal estimates of time and expenses required to complete the project · Assists the Project Engineer in scheduling staffing requirements for field projects · Assists the Project Engineer in supervising and instructing, as needed, the responsibilities of field personnel on projects assigned to them · Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements · Develops and maintains a schedule and budget for the assigned engineering project · Provides reports on the status of project milestones and adjusts schedules accordingly · Controls expenditures within limitations of project budget · Identifies project staffing requirements and coordinates staffing with supporting organization managers · Coordinates preparation and delivery of project deliverables, design documents, and bid packages · Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing · Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications · Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems · Directs integration of technical activities · Evaluates and presents changes for design, specifications, drawing releases, reports, etc. to the Project Engineer and /or Project manager for approval · Prepares interim and completion project reports · Interfaces with customers to provide project status reports and ensure customer needs are met · Provides status and progress reports to customer, project team, and management · Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project · Supervises field work and performs field work when needed · Establishes work plan and staffing for each phase of project and arranges for recruitment or assignment of project personnel · Confers with project staff to outline workplan and to assign duties, responsibilities, and scope of authority · Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget · Supervises project personnel and oversees their daily activities to ensure it is correct and complete · Reviews status reports prepared by project personnel and modifies schedules or plans as required · Prepares project reports for management, client, or others · Confers with project personnel to provide technical advice and to resolve problems · Coordinates project activities with government regulatory or other governmental agencies · Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis · Travels 25% of the time which may be out of state Supervisory Responsibilities This job has some supervisory responsibilities. Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations. Education and/or Experience A minimum of 5-8 years of field and/or related experience where a PE license counts towards that related experience, a bachelor’s degree in a related field, and demonstrates ability to meet the requirements of the job as set forth in this description. Previous construction experience is preferred. Professional Engineer (PE) license is preferred or have the ability to become licensed within 6 months of being in this position. Certificates, Licenses, Registrations 40-hour OSHA HAZWOPER certification Registered Professional Engineer (PE) preferred or have the ability to become licensed within 6 months of being in this position Valid Driver’s License and possess reliable transportation to access job sites Language Skills Proficient in communicating both verbal and written in the English language. Proficient in communicating both verbal and written in the English language. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe. Tools/Equipment Position requires ability to use tools such as a lump hammer, shovel, hand auger, Nuclear Density Gauge. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $90,000–$120,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Assists in the conduct of civil, environmental, and geotechnical engineering related services, • Performs tasks to make Staff Engineer/Associates more efficient, • Assists with inspection of compacted fills, utilities, asphalt, concrete, sitework elements, • Experiments with new growth strategies and ideas to develop technical skills, • Conducts geotechnical engineering laboratory tests, • Prepares samples of materials for laboratory testing, • Performs research and data entry, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Must have strong attention to detail with excellent analytical and willing to spend the majority of work hours in the field., • BS in Civil Engineering or related field with a Minimum cumulative GPA 3.0., • Excellent written and verbal communication skills., • Valid Driver's License and possess reliable transportation to access job sites., • Able to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Able to apply concepts of basic algebra and geometry., • Proficient or familiarity with AutoCAD, NitroPro, MS Word, Excel, Adobe. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 75% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Hourly Rate: $17/hr. -$21/hr., + overtime & mileage reimbursement.

Job Description Senior Geotechnical/Structural Engineer Location: New York, NY (Fashion District) Employment Type: Full-time We are recruiting on purpose for an experienced Senior Geotechnical/Structural Engineer to join our growing team in New York City. This is a high-impact role for a motivated professional eager to lead complex engineering efforts that range from investigation and design to rehabilitation and forensic analysis. You’ll work on diverse infrastructure and structural projects, applying your expertise in both geotechnical and structural engineering to deliver resilient, safe, and efficient solutions. Key Responsibilities As a senior technical leader, your responsibilities will include: • Geotechnical – GEOSLOPE, Slide, Plaxis, LPILE, Settle3D, DeepEX, CIVILTech, • Structural – ETABS, SAP2000, RISA, • Work on challenging, multidisciplinary projects that make a real-world impact, • Be part of a collaborative, mission-driven team, • Grow professionally through mentorship, training, and visibility in the industry, • Flexible, supportive culture with opportunities to lead Ready to build what matters? Apply today and help shape the built environment with innovative, high-integrity engineering. Would you like a version tailored for LinkedIn or Indeed, or formatted as a PDF brochure for outreach campaigns?

Job Description SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned • Conducts site inspection to monitor progress/conformance to specs and procedures, • May be expected to design portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of unapproved materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Prepares interim and completion project reports, • Provides status and progress reports to customer, project team, and management, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • May lead junior level staff and interns by providing guidance, answering questions and being a resource to them, • May direct tasks, other junior level staff and interns as needed, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Travels 25% (Site) to 100% (Geotechnical/Environmental) of the time which may be out of state Supervisory Responsibilities: This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in Civil Engineering with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred., • Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements., • 40-hour OSHA HAZWOPER certification, • Engineer in Training (EIT) preferred or have the ability to become registered within six months., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, MS Word, Excel, Adobe. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $55,000–$80,000 + overtime, mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Build Your Career at FCC Construcción With 125 years of experience, the FCC Group's Infrastructure Division is present in 25 countries, and its activities cover all areas of engineering and construction. It is a leader in the execution of transport infrastructure, as well as in residential and non-residential construction. FCC Construcción is currently the fourth-largest construction company in Spain in terms of contract volume and ranks among the top 30 in the world, according to the international magazine ENR (Engineering News-Record). Project Opportunity We are looking for a Field Engineer to join our FCC Team assigned to the MTA’s Second Avenue Subway Project. This position is based in New York, NY, and requires daily presence in the office and/or on construction sites. The MTA’s Second Avenue Subway project is a $7.7B expansion that will extend the Q Line from 96th Street into East Harlem, adding three new ADA-accessible stations at 106th, 116th, and 125th Streets. This long-awaited project will restore rapid transit access to a community underserved for decades, ease overcrowding on the Lexington Avenue line, and cut commute times—delivering a transformative impact for East Harlem residents and the city as a whole. This position will support the $2 billion design-build contract for Phase 2, which includes two tunnels that will enable the development of two new subway stations in New York. Led by Connect Plus Partners, a joint venture between FCC Construction and Halmar International, the project brings together extensive experience in large-scale infrastructure, complex tunneling, and urban transit construction. Position Summary Reports to: Tunnel Superintendent or Cavern Superintendent The Field Engineer supports daily underground construction operations, working directly alongside superintendents and foremen in the field. This role is responsible for coordinating technical activities, tracking construction progress, and ensuring compliance with project specifications, safety standards, and quality requirements. Serving as a key link between design, planning, and execution, the field engineer contributes to the effective delivery of underground works. This is a field-based position that supports the full lifecycle of construction, with engineers assigned by activity zone (tunnel or cavern) across multiple work sites. The Field Engineer’s key responsibilities are: • Support the superintendent in day-to-day construction activities, providing engineering input to ensure design intent and construction means are aligned., • Assist with pre-construction planning, including constructability reviews, site logistics, and early procurement coordination., • Review and interpret construction drawings, specifications, and submittals for use in the field., • Coordinate and track construction progress using activity-level schedules and progress measurement systems., • Participate in and document responses to RFIs, field changes, and non-conformance issues., • Provide support in managing subcontractor interfaces, daily production tracking, and verification of completed quantities., • Monitor geotechnical instrumentation data (settlement points, extensometers, piezometers, etc.) and flag deviations to engineering or geotechnical leads., • Ensure compliance with safety plans, quality assurance protocols, and environmental standards through field inspections and checklists., • Assist with the preparation and maintenance of construction documentation, including as-builts, redlines, test reports, and shift logs., • Coordinate and input field data for schedule updates, productivity tracking, and earned value analysis., • Support the preparation of daily, weekly, and monthly progress reports., • Interface with survey teams, field engineers from other disciplines, and quality control personnel to align work., • Participate in shift turnover meetings and handover documentation for 24/7 operations., • Verify material deliveries and support materials tracking against planned work., • Support installation tracking and compliance for critical systems (e.g., waterproofing, utilities, ventilation, fireproofing)., • Bachelor’s degree in Civil, Mining, Geotechnical Engineering, or related discipline., • 8-10 years of field construction experience and a minimum of 5 years in underground construction., • Ability to read and interpret plans., • Proficiency with geotechnical monitoring systems and reporting tools., • Experience using construction management software (e.g., Procore, e-Builder, or similar)., • Proficiency in Microsoft Office Suite (Excel, Word, Outlook); familiarity with scheduling tools like Primavera P6 is a plus., • Familiarity with geotechnical monitoring systems and instrumentation data review., • Ability to work in confined underground environments with exposure to variable ground conditions and limited access., • Strong written and verbal communication skills; ability to document and report on field conditions clearly., • Demonstrated problem-solving skills and capacity to adapt to real-time construction challenges., • Must be detail-oriented and organized with the ability to prioritize tasks in a dynamic field environment., • Work is primarily at active underground construction sites with exposure to confined spaces, dust, noise, vibration, and variable ground conditions., • Must be able to stand, walk, and climb for extended periods; navigate uneven ground, scaffolding, and ladders; and work around heavy tunneling equipment., • Requires regular use of personal protective equipment (PPE), including hard hats, safety boots, high-visibility clothing, and eye/ear protection as necessary., • Ability to perform site inspections, monitor field activities, and respond quickly to safety or operational issues in physically demanding conditions., • Flexibility to work extended hours, nights, weekends, and rotating shifts as project demands require. FCC is dedicated to creating an inclusive workplace where diversity is valued and respected. As an Affirmative Action/Equal Opportunity Employer, we do not discriminate against any applicant for employment or employee because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetics, creed, veteran status, military status, or any other characteristic protected under Federal, State, or local laws. Reasonable accommodations will be provided to qualified individuals with disabilities in accordance with applicable law. If you need a reasonable accommodation during the interview process, please contact our HR team.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable, • Provides expertise in field of research, • Performs and reports interim analysis of accumulated data to monitor for the safety purposes, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Preparation of proposal estimates of time and expenses required to complete project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate, • Participates in recruiting activities such as selecting, and orienting employees, • Conducts performance evaluation and provides performance feedback, • Counsels employees to reinforce policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Reinforces business relationships with existing clients and develops new relationships with future clients, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Involved in the sale of company services and secures new business Qualification: • Master’s degree preferred, a minimum of 10-12 years of experience and 8 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) license, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with computer design software (Quake, WEAP, L-Pile, Finite Element Analysis, etc.) While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $150,000–$205,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering program, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable., • Provides expertise in field of research, • May participate in recruiting activities such as selecting, orienting, and training employees, • Conducts performance evaluation and provides performance feedback, • Counsels, and disciplines employees to reinforces policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Performs and reports interim analysis of accumulated data to monitor for the safety purpose, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Reinforces business relationships with existing client and develops new relationships with future clients, • Prepares proposal estimates of time and expenses required to complete a project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate Qualifications: • Bachelor’s degree in Civil Engineering, a minimum of 8-10 years of experience and 5 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) is required., • Certificates, Licenses, Registrations, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $105,000–$150,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job DescriptionYU & Associates is seeking a Geotechnical Project Manager in our Elmwood Park, New Jersey Office. You will be responsible for planning, scheduling and execute common to complex projects establishing techniques and standards for analysis and design, coordinating with senior level management, performing mathematical calculations, and training subordinates. The candidate will be managing within an integrated multidiscipline environment and be further responsible for reviewing and certifying the work of staff, performance, managing billings, and maintain strong billability. Duties & Responsibilities: • Perform and oversee engineering calculations and design drawings related to geotechnical work., • Focus on public/private development with regulatory permitting expertise in NJ and PA., • Demonstrated ability to supervise and review others work., • Prepare proposals for professional services., • Perform and direct others with geotechnical inspections, site reconnaissance, soil borings, and field investigations., • Review proposed contracts to determine significant parameters, time schedules and mileposts and define the major task areas., • Resolve problems and coordinate the final turnover of the project to the client, as the primary contact with the client throughout the entire project., • Direct the planning and development of the project scope, procedures, and budget., • Ensure contractual commitments are met and the work is being performed according to the client's instructions., • Maintain effective relationships with members of all divisions and departments responsible for performing services in connection with the project., • Control and/or review all project forecasts, schedules, cost estimates and reports. Responsible for quality control over the complete project; maintain project files., • Monitor fees and budgets; report problems to the appropriate department and division managers., • Review and address health & safety concerns on projects assigned., • Work with the accounting department to keep billings and receipts current and accurate., • Perform other duties as assigned.Requirements:, • B.S. degree in Civil Engineering and M.S. degree with geotechnical specialty (preferred)., • Registered Professional Engineer in New Jersey and/or New York., • Possess 10+ years of geotechnical related regional experience., • Demonstrated ability to develop diverse clients and grow a business., • Proven ability to identify, develop and mentor talent., • Effectively manage projects from concept through completion., • Proven leadership and decision-making skills., • Strong attention to detail with excellent analytical and judgment capabilities., • Excellent communication, interpersonal, report writing, and project management skills., • Excellent listening, written and oral communication skills., • Working knowledge of computers and related geotechnical design software., • Possess a valid driver’s license in good standing., • Ability to establish a vision and create an environment for excellence., • Demonstrated record of ethics and high standards.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation Powered by JazzHR vxyYSKn1JB

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable, • Provides expertise in field of research, • Performs and reports interim analysis of accumulated data to monitor for the safety purposes, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Preparation of proposal estimates of time and expenses required to complete project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate, • Participates in recruiting activities such as selecting, and orienting employees, • Conducts performance evaluation and provides performance feedback, • Counsels employees to reinforce policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Reinforces business relationships with existing clients and develops new relationships with future clients, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Involved in the sale of company services and secures new business Qualification: • Master’s degree preferred, a minimum of 10-12 years of experience and 8 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) license, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with computer design software (Quake, WEAP, L-Pile, Finite Element Analysis, etc.) While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $150,000–$205,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Geotechnical department is looking for a candidate to support our growing team in the New York southern tier area (not New York City). This employee may be an entry level up to an associate level. Salary is negotiable based on prior experience and may be a wider range than listed based on discussions with supervisor and division director. Duties: • Perform geotechnical field services, which may include subsurface exploration layouts, drilling and test pit inspections, geophysical surveys, and construction monitoring., • Perform visual classification and laboratory testing of soil samples collected during the subsurface investigation., • Prepare subsurface exploration logs for use in geotechnical evaluations and reports., • B.S degree in civil engineering or related field., • 0 - 3 years of progressive experience in the geotechnical field., • Prior experience in a geotechnical laboratory is preferred but not required., • Engineer in Training (EIT) is preferred but not required., • Driver's license required., • Position will require out of town field work based on workload (approximately 40%), • Position will require ability to lift 50 pounds., • Effective verbal and written communication skills., • Possess a high capacity for self-motivation., • Ability to apply engineering principles to a variety of geotechnical projects. Salary Range: $60,000 - $75,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionAt ANS, we’re not just a consulting engineering firm—we’re a team of trailblazers shaping the future of civil, structural, and geotechnical engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. At ANS, you’ll enjoy paid vacation, sick, and personal time off; support for continuing education and community involvement; and comprehensive healthcare, vision, and dental benefits for eligible employees. We are seeking a motivated and driven Mid-level Geotechnical Engineer to join our team. ANS is a rapidly growing, emerging civil engineering firm focusing on civil, geotechnical, structural, and electrical engineering for renewable energy and infrastructure projects across the US. “MUST-HAVE” PROFILE OF THE SUCCESSFUL CANDIDATE INCLUDE: • BS in Civil Engineering, Geology, or related degree, • Valid US Drivers License, and a reliable means of transportation, • Flexibility and willingness to travel, on occasion, and for multiple consecutive days periods of times (est. up to one week at a time, once per month), • Strong communication and organizational skills, ability to find solutions to problems, and get-it-done attitude!, • Proficiency with Microsoft Office products, • Minimum 3 years of experience in consulting engineering, or related field, • Experience in preparing Engineering Reports with strong technical writing skills, • Experience with working within and leading team environments, • Working knowledge of geotechnical principles and engineering design“NICE-TO-HAVE” SKILLS FOR THE SUCCESSFUL CANDIDATE MAY INCLUDE:, • Technical licensure track including EIT, GIT, PE, PG, PMP, or similar., • Experience in planning, implementing, overseeing, and managing subsurface investigation programs, • Prior experience with geotechnical investigations, including soil borings, rock coring, and material testing, • Experience with design of foundations, support of excavation systems, and preparing reports, • Prior experience with geotechnical software (gINT, GeoStudio, LPILE, ALLPILE, DeepEx, etc.), • Familiarity with renewable energy sectorTHE CHALLENGES THAT LIE AHEAD INCLUDE:, • Working alongside a team of high-performing engineering and technical professionals, • Performing geotechnical field investigations, construction observation, and engineering evaluation and technical analysis, • Preparing technical reports and summaries, and interfacing directly with coworkers, clients, and stakeholders to communicate findings and recommendations, • Completing technical analyses, including foundation design, support of excavation, and other engineering evaluations

Job Description Geotechnical Project Engineer/Manager to join its collaborative team in New York City, White Plains, or Melville, Long Island. This individual will serve a key function in providing geotechnical engineering expertise through geotechnical analysis and design, and efforts that support management of projects, supervision of staff engineers, and interfacing with clients. In this role, you will have the opportunity to partner cross-functionally on both small-scale and large-scale geotechnical projects primarily in office, residential, and retail\warehouse markets. Job Responsibilities • Perform complex analyses, structural design of pile elements and underpinning systems, and special engineering inspections;, • Prepare technical documents and manages the preparation of the proposals, reports, construction documents, and construction-related correspondence associated with the projects managed;, • Supervise field investigations, and conventional earthwork and foundation construction activities;, • Perform and manage multiple projects and tasks within specific budgets, schedules, and deadlines. Plans, schedules and develops task and project budgets. Prepare progress reports, draft change orders, draft invoices, and project billings;, • Bachelor's degree in Civil or Geotechnical Engineering; Master's degree with Geotechnical emphasis;, • Professional Engineer licensure;, • 6+ years of related Geotechnical experience;, • 3+ years of field experience with geotechnical investigations and construction observation experience including: mass grading, deep foundations, subgrade for footings, ground improvement, and excavation support including tieback installation and testing;, • Proven experience in preparing technical reports, specifications, construction plans, and geotechnical recommendations; writing proposals; running/coordinating projects; managing clients; managing billings; and reviewing the work of staff and mentoring staff;, • Strong understanding of codes and other regulatory requirements;, • Knowledge of quantitative/technical analyses and related software;, • Possess an entrepreneurial and professional demeanor, as well as strong written, verbal, and presentation communication skills;, • Desire and ability to seek out new business opportunities and develop additional clients while maintaining project workload;, • Ability to coach and assist with the management of staff;, • Demonstrated ability to work with staff, clients, and regulatory agencies;, • A collaborative team player with excellent interpersonal and social skills; and, • Possess reliable transportation for client meetings and job site visits and a valid driver's license in good standing.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Pine Brook, N.J. SESI has earned an excellent reputation for providing innovative geotechnical, site/civil, and environmental engineering solutions for owners, developers, and the construction industry in the NJ, NY, CT region. SESI is currently expanding to meet the needs of existing clients. Join a well-established, fast-growing company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI engages its employees in all aspects of its projects and encourages them to participate in design and project management functions to their full potential. SESI Consulting Engineers has been selected as one of NJBIZ’s 2020 Fifty "FASTEST GROWING" Companies! We offer a competitive compensation and benefit package to include health, dental, vision insurance, retirement plan, paid time off, tuition reimbursement, professional development assistance, bonus potential, just to name a few. Summary SESI seeks an Assistant Project Engineer to work in its Site/Civil Department. This individual will serve a key function in helping design commercial, residential, mixed-use, and industrial developments. In this role, you will have the opportunity to work in a dynamic, collaborative environment. Essential Duties and Responsibilities include the following. Other duties may be assigned. · Prepare and update various engineering documents such as reports, specifications, plans, construction schedules, cost estimates and design plans for projects using AutoCAD Civil 3D and associated software packages. · Use reports, maps, drawings, engineering plans, tests, and aerial photographs to assess soil composition, terrain, hydrological characteristics, and topographical and geologic data and their impact on the planning and design of projects. · Familiarity with current local, state (New Jersey and New York), and Federal Permitting regulations · Must be willing to work in the field as necessary; · Position requires work Monday through Friday with occasional evenings and weekends; and Performs other duties as requested Supervisory Responsibilities This job has some supervisory responsibilities. Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations. Education and/or Experience · Bachelor of Science in Civil Engineering; · 4-8 years of prior relevant professional experience in site/civil design, including site planning, grading, stormwater management, and erosion control measures; · Excellent written and verbal communication skills; · Proficient in AutoCAD and Civil 3D; · Strong attention to detail with excellent analytical, multitasking, and judgment capabilities; · Reliable transportation to access job sites with a valid driver’s license in good standing; and · Demonstrated ability to follow direction and work in a collaborative team environment Certificates, Licenses, Registrations · FE/EIT certification required; PE desired; · Valid Driver’s License and possess reliable transportation to access job sites Language Skills Proficient in communicating both verbal and written in the English language. Proficient in communicating both verbal and written in the English language. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe. Tools/Equipment Position requires ability to use tools such as a lump hammer, shovel, hand auger, Nuclear Density Gauge. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Base salary $75,000–$95,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Geotechnical Project Engineer/Manager to join its collaborative team in New York City, White Plains, or Melville, Long Island. This position offers a hybrid work schedule. This individual will serve a key function in providing geotechnical engineering expertise through geotechnical analysis and design, and efforts that support management of projects, supervision of staff engineers, and interfacing with clients. In this role, you will have the opportunity to partner cross-functionally on both small-scale and large-scale geotechnical projects primarily in office, residential, and retail\warehouse markets. Job Responsibilities • Perform complex analyses, structural design of pile elements and underpinning systems, and special engineering inspections;, • Prepare technical documents and manages the preparation of the proposals, reports, construction documents, and construction-related correspondence associated with the projects managed;, • Supervise field investigations, and conventional earthwork and foundation construction activities;, • Perform and manage multiple projects and tasks within specific budgets, schedules, and deadlines. Plans, schedules and develops task and project budgets. Prepare progress reports, draft change orders, draft invoices, and project billings;, • Bachelor's degree in Civil or Geotechnical Engineering; Master's degree with Geotechnical emphasis;, • Professional Engineer licensure;, • 6+ years of related Geotechnical experience;, • 3+ years of field experience with geotechnical investigations and construction observation experience including: mass grading, deep foundations, subgrade for footings, ground improvement, and excavation support including tieback installation and testing;, • Proven experience in preparing technical reports, specifications, construction plans, and geotechnical recommendations; writing proposals; running/coordinating projects; managing clients; managing billings; and reviewing the work of staff and mentoring staff;, • Strong understanding of codes and other regulatory requirements;, • Knowledge of quantitative/technical analyses and related software;, • Possess an entrepreneurial and professional demeanor, as well as strong written, verbal, and presentation communication skills;, • Desire and ability to seek out new business opportunities and develop additional clients while maintaining project workload;, • Ability to coach and assist with the management of staff;, • Demonstrated ability to work with staff, clients, and regulatory agencies;, • A collaborative team player with excellent interpersonal and social skills; and, • Possess reliable transportation for client meetings and job site visits and a valid driver's license in good standing.

Job DescriptionThe individual will work on a variety of consulting projects related to geotechnical analysis and design. Applicants must be able to work in locations that feature rough terrain typical of construction sites. The primary responsibilities of this role are to provide support to project managers and perform duties as field representative. Typical assignments include carrying out subsurface explorations, performing field tests and collection field data and samples, monitoring constructions sites, compiling data and preparing reports. Requirements: • Bachelor's degree in civil engineering with heavy emphasis on geotechnical engineering coursework (master's in civil engineering/geotechnical engineering preferred)., • 0-2 years of practical geotechnical engineering experience (internship considered)., • E.I.T preferred., • Strong knowledge of Microsoft Office software (Word, Excel, and Outlook)., • Working knowledge of common geotechnical engineering software tools., • Ability to become proficient at using firm's field-testing equipment, including nuclear gauge, and other equipment., • Ability to prepare accurate daily field and boring logs as well as other types of reports and meet required deadlines for completion., • Excellent verbal and written communication skills., • A flexible working style and an ability to work independently and with teams., • Strong analytical and judgment capabilities., • Willingness/ability to travel., • Own Transportation/Valid Driver's License., • Field and Office assignments, as required.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation Powered by JazzHR 5rSvwjFr8i

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at and True-Environmental.com to discover the full scope of our capabilities. Matrix is seeking a Associate Vice President & Senior Director of Engineering Markets – NJ/NY Region to drive business development and project execution in central and northern New Jersey and New York. This is a high-impact, entrepreneurial role for a seasoned civil, structural and/or geotechnical engineering professional who thrives on building client relationships, leading technical delivery, and cultivating teams. You’ll be a visible leader in the region, shaping infrastructure projects, mentoring talent, and expanding Matrix’s footprint. Ready to shape the future of New Jersey and New York’s infrastructure? Apply now at or reach out directly to our recruitment team. Let’s build something extraordinary—together.What You'll Do • Market Leadership & Business Development, • Lead strategic growth in NJ and NY by identifying opportunities and cultivating relationships with public agencies, municipalities, developers, and consultants, • Drive proposal development and pursuit strategy for infrastructure, land development, and municipal projects, • Represent Matrix at industry events and client meetings across NJ and NY metro, • Champion a client-first mindset, ensuring long-term partnerships and repeat business, • Entrepreneurial Spirit & Team Building, • Bring an entrepreneurial approach to expanding services and market share, • Build and inspire high-performing teams through mentorship, collaboration, and shared purpose, • Foster a culture of employee development, ownership, and innovation, • Project Leadership & Technical Delivery, • Serve as Project Manager for civil engineering projects you help bring in, • Oversee design, permitting, and construction phases with a focus on quality and client satisfaction, • Collaborate with multidisciplinary teams across Matrix’s service lines, • Technical Excellence & Mentorship, • Act as a technical leader in civil/site engineering, stormwater, grading, and utility design, • Guide junior staff and contribute to a culture of continuous improvementMinimum Qualifications, • Bachelor’s degree in Civil Engineering or related field (Master’s a plus), • Professional Engineer (PE) license required, • 10+ years of experience in civil/site engineering and project management, • Proven track record as a seller-doer with strong client relationships in NJ and/or NY (NYC agency experience and relationships a plus, as well as regional and national client base), • Deep understanding of state, municipal, and county regulations

Job Description About the Role The Engineering group at AKRF is seeking a Geotechnical Engineer to be based out of New York City. The potential candidate will have the opportunity to work in an environment of encouragement and collaboration to help AKRF shape the future of our communities. Job Responsibilities: • Providing geotechnical oversight and logging of geotechnical explorations (borings, test pits, CPTs);, • Developing laboratory and field testing programs;, • Preparing engineering reports, including the evaluation of collected field and laboratory results, preparation of figures and drawings;, • Preparing engineering analyses for slope stability, settlement and consolidation estimates, deep foundation design (compressive, uplift, and lateral capacities), mat foundation design, ground surcharging, and ground improvement techniques (soil grouting, ground freezing, etc.), and soil liquefaction;, • Management of multiple projects (prior project management skills a plus);, • Working knowledge and related field experience regarding foundation-related construction in urban areas;, • 8-12 years’ experience, • Bachelor’s degree in civil engineering (a master’s degree with a concentration in Geotechnical Engineering is a plus)., • Engineer-In-Training Certificate, • NYS PE licensure preferred, PE licensure in other states will be required to obtain NYS licensure within 6 months of hire., • Required to travel to work sites in New York City, Long Island, the Hudson Valley, Connecticut and New Jersey, with work being performed Monday through Friday with the possibility of occasional overtime, evening, and weekend work., • OSHA 10-hr or 40-hour HAZWOPER training a plus. Compensation will range from $120k to $150K, and commensurate with experience. Why Work at AKRF Founded in 1981, AKRF is an award-winning consulting firm with 400 planners, engineers, designers, economists, ecologists, geologists, historians, archaeologists, acousticians, and many other types of professionals guided by the belief that to be original is to be transformative. Professionals join and remain at AKRF for our corporate-casual environment that values flexible work schedules and locations, and balances award-winning projects with social impact initiatives, charitable giving, and plenty of fun and games. We foster a diverse, equitable, and inclusive environment where employees are respected and valued in honor of their identities; we strive to deliver on this promise every day. Our cookie exchanges and ice cream socials are quite the treat. What We Offer We provide employees with a benefit package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The benefits program at AKRF includes: • Medical, Dental, Vision insurance, • Vacation and Sick time, • Flexible work schedules and locations, • 401(k) retirement plan with employer matching, • Additional Voluntary Life Insurance, • Short- and Long-Term Disability, • Stock Ownership, • Tuition Reimbursement, • Training and professional development courses, • Opportunities for community outreach through internal networks, • Charitable donation match AKRF enforces a policy of equal employment opportunity in our daily operations. The firm has a demonstrated history of hiring, training, developing, promoting and retaining minority group members and women. All employment-related decisions are based solely on relevant criteria and without regard to race, color, religion, age, sex, pregnancy, national origin, age, physical or mental disability, marital status, sexual orientation, sexual identity, caregiver status, military/veteran status or citizenship status, or any other characteristic protected by federal, state, or local law.

Job Description Geotechnical Engineer Location: Parsippany, New Jersey / New York Region Schedule: Full-time, On-Site Compensation: $130,000–$200,000 (based on experience) Company Overview Our client is a multidisciplinary engineering firm delivering geotechnical, environmental, and civil-site solutions for commercial and public-sector clients. The team specializes in complex subsurface evaluations, foundation design, and geotechnical structures, providing high-quality engineering services from project concept through construction. Their team works on technically demanding projects involving deep excavations, retaining structures, foundation systems, subsurface investigations, and geotechnical instrumentation. Position Overview We are seeking a Senior Geotechnical Project Engineer with strong geotechnical expertise to lead technical design, reporting, and project management activities. This role requires a Senior Project Engineer capable of delivering full engineering reports, managing client communication, and producing designs for retaining walls, piles, and other geotechnical support systems. Candidates must be located within a 1-hour commute of the offices (Parsippany, NJ) and hold a Professional Engineer (PE) License. Key Responsibilities • Manage geotechnical projects from planning to final delivery, including schedules, budgets, and technical execution., • Perform and oversee geotechnical investigations and subsurface evaluations., • Prepare complete engineering reports (A–Z), including data analysis, calculations, and engineering recommendations., • Design geotechnical structures such as retaining walls, deep foundations, piles, shoring, and other support systems., • Produce designs, drawings, and calculations using AutoCAD Civil 3D and relevant geotechnical software., • Serve as the main client-facing engineer, managing communication, expectations, updates, and technical discussions., • Conduct foundation inspections, SOE monitoring, and construction phase oversight., • Evaluate soil conditions and provide recommendations during active construction., • Coordinate project tasks with internal staff, senior engineers, and external partners., • Prepare proposals, cost estimates, and project documentation., • Mentor junior staff and support team development as needed., • Bachelor's degree in Civil Engineering or Geotechnical Engineering., • 6+ years of professional engineering experience (8–12 years strongly preferred)., • 5+ years managing Geotechnical projects, • Active Professional Engineer (PE) license., • At least 3 years of office-based geotechnical design experience., • Field experiences performing soil investigations, foundation inspections, and SOE monitoring., • Strong proficiency with AutoCAD Civil 3D and geotechnical design methodologies., • Demonstrated experience designing retaining walls, piles, and similar geotechnical systems., • Fluent in English (C1/C2 level)., • Proficiency with engineering design software (Quake, WEAP, L-Pile, FEA tools)., • Experience using NitroPro, GSLOPE, KeyWall, Rocscience, and Microsoft Word/Excel., • Background in environmental and civil-site engineering projects., • Experience working on government or municipal projects., • Full-time, in-person W-2 role., • Compensation: $130,000–$200,000 USD, depending on experience and licensure., • Benefits include Medical, Dental, and Vision Insurance., • Life and Disability Insurance coverage., • Paid Time Off (Vacation, Sick Days, Holidays)., • SIMPLE IRA with company matching., • Professional development, licensing support, and continued education., • Work on high-impact geotechnical and infrastructure projects in the NY/NJ region., • Take technical ownership of complex designs and field operations., • Join a reputable, well-established engineering firm with strong leadership.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering program, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable., • Provides expertise in field of research, • May participate in recruiting activities such as selecting, orienting, and training employees, • Conducts performance evaluation and provides performance feedback, • Counsels, and disciplines employees to reinforces policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Performs and reports interim analysis of accumulated data to monitor for the safety purpose, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Reinforces business relationships with existing client and develops new relationships with future clients, • Prepares proposal estimates of time and expenses required to complete a project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate Qualifications: • Bachelor’s degree in Civil Engineering, a minimum of 8-10 years of experience and 5 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) is required., • Certificates, Licenses, Registrations, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $105,000–$150,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned. · Makes calculations, using engineering formulas and skills · Instructs drafters how to reduce designs into completed drawings · Conducts routine geotechnical engineering laboratory checks · Leads concrete and rebar inspection testing · Performs research and writes reports · Prepares samples of unapproved materials for laboratory testing · Uses computer to run standard programs to solve engineering problems · Performs routine laboratory tests to determine various design parameters · Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements · Develops and maintains a schedule and budget for the assigned engineering project · Provides reports on the status of project milestones and adjusts schedules accordingly · Controls expenditures within limitations of project budget · Identifies project staffing requirements and coordinates staffing with supporting organization managers · Coordinates preparation and delivery of project deliverables, design documents, and bid packages · Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications · Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems · Prepares interim and completion project reports · Provides status and progress reports to customer, project team, and management · Classifies soils according to standard types · Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings · Prepares geologic reports and maps, interprets research data, and recommends further study or action · Conducts or participates in environmental studies and prepares environmental reports · Directs drilling of exploratory borings and wells · Oversees installation of monitoring wells in accordance with state and federal requirements · Collects or supervises collection of soil and groundwater samples for analysis of chemical composition · Determines direction of groundwater flow based on review of historical records and site specific data · Determines the nature and extent of contamination in soil and groundwater at environmental sites · Participates in decision making regarding research priorities and provides information on feasibility of prospective projects Supervisory Responsibilities This job has some supervisory responsibilities. Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations. Education and/or Experience Bachelor’s degree in Civil Engineering (or applicable Engineering Degree) with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred. Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements. Certificates, Licenses, Registrations 40-hour OSHA HAZWOPER certification Registered Professional Engineer (PE) preferred or have the ability to become licensed within 6 months of being in this position ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification Valid Driver’s License and possess reliable transportation to access job sites Language Skills Proficient in communicating both verbal and written in the English language. Proficient in communicating both verbal and written in the English language. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe. Tools/Equipment Position requires ability to use tools such as a lump hammer, shovel, hand auger, Nuclear Density Gauge. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Base salary $55,000–$80,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Snipebridge, a strategic talent solutions company specializing in connecting exceptional talent to great career opportunities in the Architecture & Planning industry, is seeking a Supervising Engineer -Water Resources. Our client is an ENR Top 500 Design firm focused on geotechnical, environmental, water, ecological, and construction management services that has been delivering exceptional services for more than six decades. Their multidisciplinary team tackles intricate projects in diverse industries such as transportation, energy, infrastructure, and development. The firms long-standing commitment to technical excellence and client satisfaction has fueled their growth and success. They offer a collaborative and dynamic work environment where talented individuals can thrive and contribute to impactful projects. Position Summary This key position demands strong client-facing skills alongside the ability to lead and mentor staff-level engineers. A critical aspect of the role involves partnering with the firms dams/levees/water resources Practice Leaders to actively develop and expand our market footprint within New Jersey, New York, and Pennsylvania. Primary Responsibilities: • Supervising and scheduling geotechnical and structural engineering staff and providing technical direction and oversight., • Senior project management of interdisciplinary teams of geotechnical, structural, hydrologic/hydraulic, and civil engineers; to include, scheduling and supervising project meetings, producing and managing project schedules and budgets., • Managing and reviewing the preparation of construction plans and technical specifications., • Supervising and reviewing dam and/or levee safety inspections., • Providing leadership/mentoring to technical staff., • Managing and tracking budgets, creating project invoicing and Client follow-up, • Communicating effectively and efficiently with team members, clients and contractors., • Interacting with clients and regulatory agencies., • Preparing technical and cost proposals., • Supervising fieldwork including test borings and instrumentation installations and construction monitoring for dam and levee rehabilitation projects., • Providing data analysis, organization, and interpretation in support of dam/levee inspections, evaluations, and rehabilitations projects., • Executing and/or supervising engineering analyses including seepage and slope stability analyses of embankment dams and levees, drainage and filter designs, gravity dam stability analyses., • Writing and/or reviewing field reports, inspection/engineering reports, and permit applications. Education/Skills/Experience: • B.S. in Civil Engineering or related field of practice is required. Master’s Degree with a Geotechnical focus is a plus., • Professional Engineer license in NJ with the ability to obtain PE in NY and PA., • 15 to 20 years of experience in civil – geotechnical engineering, with direct involvement in dam safety inspections, condition assessments, subsurface exploration programs, engineering analyses, dam rehabilitation design, and regulatory permitting., • Experience completing projects with public sector/municipal agencies in New Jersey, New York and Pennsylvania is highly preferred., • Proven experience with design and development of engineering technical specifications, cost estimating and other related bidding documents., • Strong interpersonal skills and ability to speak publicly., • Solid project financial management skills; knowledge of production support systems and personal computer proficiency are all required competencies., • Experience in providing technical and project leadership to staff-level or junior engineers., • A strong background using various geotechnical computer software such as SEEP/W, SLOPE/W, and finite element analysis software such as PLAXIS are preferred., • Knowledgeable of dam and levee safety guidelines utilized by the U.S. Army Corps of Engineers, Bureau of Reclamation, Federal Energy Regulatory Commission, Natural Resource Conservation Service, and other Federal agencies, as well as State Dam Safety agencies. All applicants must be legally authorized to work in the United States without sponsorship and must already possess long-term work authorization.

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Quality Assurance Field Inspector (QAFP) – Geotechnical Reports to: Chief Resident Engineer General Qualities: • Has excellent communication and writing skills., • Possesses a thorough knowledge of construction processes., • Has excellent Microsoft Word and Excel. Ability to navigate through company internet-based systems., • Ability to work in adverse weather conditions. Must be physically able to perform moderately strenuous tasks which include walking along rough terrain, climbing ladders, and lifting up to 50 pounds., • Proactive self-starter capable of setting a positive example for the staff. Technical Responsibilities: • Responsible for geotechnical inspections., • Performs oversight inspections and audits to ensure that the Work is compliant with Plans, Specifications, Quality Control Plans, and all other required provisions., • Perform field surveillance of quality procedures, verification of corrective actions for quality findings, review of testing, inspection, and sampling documents., • Review of quality control and quality assurance records., • Required to prepare and submit detailed daily work records in accordance with NYSDOT Manual of Uniform Record Keeping (MURK)or other form(s) approved by the Port Authority., • Review technical drawings and other engineering data; ensure structures are built according to specifications., • Conduct site visits and investigations, analyze engineering problems, propose solutions and alternatives, and provide recommendations. Requirements: Educational /Professional Experience Required: • Minimum of five years of experience in off-site fabrication and/or on-site erection of steel structures., • AWS (American Welding Society) Certification as Welding Inspector (CWI) is highly desired but not a must., • Non-Destructive Testing (NDT) experience is highly desired but not a must., • International Code Council (ICC) bolting inspector certification is highly desired but not a must. Professional Development: • Actively participates in professional development and training and licensing. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate on the basis of race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description WHO IS HILLIS-CARNES? Hillis-Carnes Engineering Associates (HCEA) is a multi-disciplined ENR Top 500 engineering firm with 20 offices in the mid-Atlantic. We have a demonstrated history of success for the past 35 years. We are 100% employee-owned ESOP, and our history of success can be attributed to our motivational employee owner. We believe in fostering teamwork, rewarding ambition, and providing opportunities for professional advancement. General Responsibilities Candidate will work with our geotechnical and materials testing/inspections departments and be responsible for a wide variety of projects for public and private sector clients. Duties may include but not limited to; test boring/test pit observations, laboratory analysis, preparation of geotechnical reports/calculation, management of field staff, review of daily field reports, performance of on-site construction materials testing services, etc. Requirements • Must be local to the Northern New Jersey market and have deep local industry experience and relationships., • Valid driver's license and satisfactory driving record., • Must meet pre-employment requirements, • Reliable vehicle suitable for use on construction sites., • 10+ years of progressive experience in the geotechnical engineering consulting industry., • Professional Engineering license in New Jersey., • Familiarity with New Jersey specific codes and requirements for geotechnical explorations., • Familiarity with geotechnical software (i.e., Gint, L-Pile, MSEW, etc.)., • Strong oral and written communication skills., • Strong business development experience Hillis-Carnes is an Equal Opportunity Employer/Affirmative Action Employer Minorities and Women are encouraged to apply. Job Posted by ApplicantPro

Job Description POSITION SUMMARY Reports to: Construction Manager (Underground) The Lead TBM Tunnel Manager will be responsible for planning, coordinating, and supervising all Tunnel Boring Machine (TBM) operations to ensure safe, efficient, and high-quality excavation. This role will oversee ground improvement works, interpret geotechnical and instrumentation data, and implement mitigation measures as required to safeguard adjacent structures and maintain compliance with design and safety standards. The Lead TBM Tunnel Manager will serve as a key advisor to project leadership, providing technical direction during tunneling operations and ensuring alignment with project objectives. The Lead TBM Tunner Manager’s key responsibilities are: • Planning and execution of all TBM tunneling operations., • Supervising ground improvement works to ensure safe excavation and minimize ground deformations., • Overseeing TBM operations to ensure compliance with safety standards and quality of construction., • Developing and implementing TBM procedures and operational strategies tailored to variable ground conditions, including soil, rock, and mixed-face geology., • Evaluating instrumentation readings daily and preparing written interpretations of geotechnical measurements taken during TBM excavation., • Coordinating and implementing mitigation measures when instrumentation alert or limit values are reached or are at risk of being reached., • Participating in daily site progress meetings with the Project CEO and contributing to strategic decision-making., • Submitting daily reports documenting TBM performance, instrumentation results, and ground behavior., • Maintain full availability during active TBM operations to provide technical support and immediate decision-making., • Coordinating with design, construction, and HSE teams to ensure integrated planning and response to unforeseen conditions., • Supporting risk assessments and participating in the development of contingency plans related to TBM operations., • Managing interface with TBM manufacturer representatives and subcontractors involved in tunnel excavation and segmental lining., • Bachelor’s degree in Civil, Mining, Geotechnical Engineering, or related discipline., • Minimum of 15 years of experience in underground construction., • Successful completion of at least three (3) pressurized-face TBM driven tunnels with precast segmental liners in variable rock, soil, and mixed-face ground conditions of similar size and purpose within the last 15 years., • Licensed Professional Engineer (PE) in the State of New York preferred, but not required., • Proven expertise in TBM operations, ground improvement techniques, and geotechnical instrumentation., • Strong leadership, decision-making, and communication skills, with the ability to coordinate multidisciplinary teams in high-risk underground environments., • Proficiency with geotechnical monitoring systems, TBM operation software, and reporting tools., • Experience with bored tunnel construction, micro-tunnels, and SEM construction., • Familiarity with tunnel monitoring systems (e.g., instrumentation for ground movement, water ingress)., • Experience with tunnel lining systems (e.g., shotcrete, segmental lining, waterproofing membranes)., • Experience with subway project construction, delivery, and handover of tunnel assets., • Knowledge of government regulations related to the construction industry., • Proficiency in Microsoft Office tools (Word, Excel, Outlook)., • Proficiency in project management tools (e.g., Microsoft Project, Gantt chart planning)., • Familiarity with BIM tools (e.g., Navisworks, Revit) for underground coordination., • Familiarity with large-span support systems and structural concrete works., • Understanding of geotechnical instrumentation and monitoring., • Ability to interpret complex underground construction drawings., • Proficiency in construction documentation and reporting tools., • Work is primarily at active underground construction sites with exposure to confined spaces, dust, noise, vibration, and variable ground conditions., • Must be able to stand, walk, and climb for extended periods; navigate uneven ground, scaffolding, and ladders; and work around heavy tunneling equipment., • Requires regular use of personal protective equipment (PPE), including hard hats, safety boots, high-visibility clothing, and eye/ear protection as necessary., • Ability to perform site inspections, monitor field activities, and respond quickly to safety or operational issues in physically demanding conditions., • Flexibility to work extended hours, nights, weekends, and rotating shifts as project demands require. FCC is dedicated to creating an inclusive workplace where diversity is valued and respected. As an Affirmative Action/Equal Opportunity Employer, we do not discriminate against any applicant for employment or employee because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetics, creed, veteran status, military status, or any other characteristic protected under Federal, State, or local laws. Reasonable accommodation will be provided to qualified individuals with disabilities in accordance with applicable law.

Overview Keller is the world leader in geotechnical construction and deep foundations. With a North American presence of over 100 years, we operate as the market leader with over 50 offices throughout the US and Canada. By connecting global resources and local experience, Keller develops innovative, practical, and cost-effective solutions to geotechnical challenges. Our values of integrity, collaboration, and excellence enable us to lead the industry in providing the optimal solution for our clients. Keller is looking for an experienced Field Engineer based in the New York metropolitan area. Responsibilities This Field Engineer position involves working on projects within the region to gain real world construction engineering and management experience. This experience provides the highly qualified civil engineer an opportunity to learn first-hand the complex world of Geotechnical and Deep Foundation Construction. Keller is an excellent fit for a candidate who decided to become a civil engineer to work in construction. This role includes a balance of design and construction management with a combination of field and office work. Qualifications • BS Degree in Civil Engineering, MS preferred, • Sound technical knowledge, • Problem solving and commonsense, • Communication and teamwork, • Commercial instincts, • Get-it-done attitude, • Ability to meet hectic and changing schedules and deadlines, • Extensive travel up to three years Keller is an Equal Opportunity Employer. We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply. Equal Employment Opportunity

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at and True-Environmental.com to discover the full scope of our capabilities. Matrix New World is currently seeking a Senior Marine Structural Project Manager for the New York/New Jersey metro area. Matrix is a growing full-service environmental services and engineering firm offering unmatched expertise in delivering some of the nation's most exciting and complex infrastructure, resiliency, and sustainability projects, including such projects as FiDi Coastal Resiliency, Battery Park City Authority Resiliency, and Bush Terminal Pier 6 Redevelopment. As a Senior Project Manager, you will be responsible for leading engineering staff, projects, and tasks in the marine and coastal engineering field. You will provide engineering, inspection and/or permitting leadership, coordinate with clients, contractors, and other stakeholders, and develop new business and project proposals. The successful candidate will have broad experience that encompasses a wide array of marine, coastal, and waterfront structural/geotechnical engineering projects. This will include inspection, design, rehabilitation, permitting, and/or construction oversight for bulkheads, piers, marine terminals, fendering and mooring systems, ferry landings, living shorelines, stone revetments, and other port-related infrastructure.What you'll do • Oversee project scope, schedule, budget and QA/QC process for marine and coastal projects., • Provide support on multiple and multi-discipline design projects, including analyzing and documenting critical design and permitting elements., • Supervise and mentor staff and is responsible for allocation of manpower., • Coordinate with clients, contractors, outside consultants, government agencies and company staff, including providing technical support/oversight to team members., • Develop new business and assist in the preparation of project proposals., • Serve as a technical expert for internal and external clients., • Participate in marketing and business development initiatives.Minimum Qualifications, • BS or MS in civil, structural, geotechnical, environmental or coastal engineering, • Professional Engineer (PE) license, • Excellent written and verbal communication skills, • Proficient in MS Office SuiteAll qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description Hillis-Carnes Engineering Associates (HCEA) is a multi-disciplined ENR Top 500 engineering firm with 20 offices in the mid-Atlantic. We have a demonstrated history of success for the past 35 years. We are 100% employee-owned ESOP and our history of success can be attributed to our motivation employee owner. We believe in fostering teamwork, rewarding ambition, and providing opportunities for professional advancement. We are seeking a Project Manager in our Northern New Jersey office. Candidate must be dependable, enthusiastic, detail-oriented, and able to multi-task while working in a fast-paced environment. Assignments will include management of construction materials testing services for commercial and residential land development projects. Construction materials testing project duties will include management, coordination, supervision, review, and direction of technician staff for earthwork, concrete, foundation, masonry, steel, EIFS, and pavement construction testing. Prepare and submit bids and proposals and attend pre-bid meetings. Efficiently perform on-site project inspections including, but not limited to, soil bearing and compaction tests, concrete, and steel inspections. Meet with clients and attend site meetings, as necessary. Requirements • Bachelor's degree in construction management, Civil Engineering, or Geology is preferred., • Preferred 3-5 years of field or project management experience in Geotechnical Engineering, Construction Materials Testing, or Construction Project Management, • Engineer in Training or Registered Professional Engineer preferred but not required., • Experience managing a construction project backlog between $1-3 million., • Experience estimating, specifically determining labor requirements for various types of construction projects., • Some business development experience is a plus and must be able to interact/communicate with clients., • Experience managing construction/field staff a plus., • Specialty construction testing certifications a plus (ACI, NECEPT, ICC) Hillis-Carnes is proudly an Equal Opportunity Employer. Minorities and Women are encouraged to apply for this position. Job Posted by ApplicantPro

Geotechnical Engineer We are looking for a driven Geotechnical Engineer to support the planning, execution, and delivery of engineering projects across a variety of environments. This role offers the opportunity to develop project engineering skills under the guidance of senior staff, while contributing to geotechnical design, fieldwork, and client reporting. Ideal candidates will have hands-on field experience, technical curiosity, and a strong foundation in engineering principles. Geotechnical Engineer Responsibilities • Conduct field investigations, soil sampling, and laboratory testing to support geotechnical analysis, • Assist with report writing, engineering calculations, and the preparation of drawings and specifications, • Support Project Engineers and Project Managers with design, budgeting, and scheduling tasks, • Perform construction inspections, including concrete, rebar, and earthwork observation, • Collaborate with cross-functional teams to solve engineering problems and deliver project milestones, • Ensure quality, safety, and compliance with local, state, and federal regulations, • Bachelor’s degree in civil, geotechnical, or related engineering field, • 3–5 years of relevant experience; PE license preferred or ability to obtain within 2 years, • 40-hour OSHA HAZWOPER certification (preferred), • Experience with tools such as Nuclear Density Gauges, hand augers, and soil classification procedures, • Familiarity with AutoCAD, Civil 3D, Rocscience, GSLOPE, Microsoft Office, and related software, • Strong communication, problem-solving, and organizational skills Compensation & Benefits: • Base salary: $91,000–$121,000, • Bonus potential and mileage reimbursement

Senior Geotechnical Project Manager We’re actively seeking a Senior Geotechnical Project Manager to lead and deliver complex geotechnical engineering projects from concept to completion. This leadership role involves managing field investigations, coordinating with clients and multidisciplinary teams, and ensuring technical excellence in all aspects of project execution. The ideal candidate is a licensed Professional Engineer (PE) with extensive geotechnical experience and strong project management capabilities. As a Senior Geotechnical Project Manager, you will: • Direct and manage geotechnical site investigations, analysis, and reporting, • Lead the planning, budgeting, and scheduling of projects across multiple sites, • Oversee preparation of technical reports, proposals, and design documents, • Collaborate with clients and internal teams to deliver efficient, high-quality solutions, • Mentor junior staff and contribute to the professional growth of the team To succeed as a Senior Geotechnical Project Manager, candidates must have: • A valid PE license, • 10–12+ years of engineering experience, including 8+ years in project management, • Expertise in geotechnical engineering principles and software (e.g., Rocscience, GSLOPE, Civil 3D), • OSHA 40-hour HAZWOPER certification (preferred), • Strong written and verbal communication skills, • A competitive salary range of $152,000–$210,000, • Bonus opportunities and mileage reimbursement, • Paid time off, full benefits package, and 401(k) with company match