Trabajos highway en Orlando, FloridaCrear alertas

Job Summary: All drivers run daily routes with frequent stops and are required to load packages onto hand trucks and unload product at each stop on the assigned route in the order they are designated by the Transportation Department Manager. The candidate will operate successfully in a cross-dock model picking up a loaded truck from a nightly delivery at the assigned loading dock and returning the empty truck back to the assigned lot at the end of the route. May be required to assist occasionally with loading-trucks, palletizing product, and performing other duties as assigned by Supervisor or Manager. RESPONSIBILITIES • Provide technical, customer relations, and personnel management for major programs and projects., • Runs routes efficiently, meeting or exceeding designated route times, • Unload product from trailer, by hand or using a hand cart, and place in designated customer storage areas. May include transporting product down ramps, stairs, or docks, in all weather conditions., • Frequently lift, push, or move product that weighs 1-75 pounds, up to 100 pounds; frequently reach up to 72” to stack and unstack pallets and hand cart; constantly bend and twist while loading and unloading product, and retrieving items from trailer., • Verify delivery of items with customer and obtain proper signatures. Contact management for authorization when discrepancies are on invoices. Communicate all errors/returns., • Calls in when a customer does not receive their entire order (shorts), • Handles any customer complaints professionally, • Handles company equipment properly, follow written driver safety rules, and performs a pre-trip inspection. Perform pre-trip and post-trip responsibilities in accordance with Department of Transportation (DOT) regulations and Sysco policies and procedures QUALIFICATIONS Education • Degrees/Certificates Minimum Required:, • High School or GED or equivalent Experience • One-year route delivery experience or applicable background driving a straight truck, • Valid Commercial Driver’s License – Class B (Class A preferred), • Commercial Vehicle Drivers must have the ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records. Skills • Operate vehicle in a variety of traffic and weather conditions., • Meet or exceed minimum productivity levels established by the Company., • Meet or exceed established cases per error goals, • Demonstrate strong customer relations and problem resolution skills., • Effectively plan and organize work activities independent of direct supervision., • Develop a good working knowledge of product and inventory control techniques and procedures., • Maintain ongoing inter-department communications related to routing, safety, and customer relations., • Proven ability to communicate articulately and perform simple arithmetic (Experience in handling money preferred), • Building Customer Loyalty, • Managing Work, • Adaptability, • Building Trust, • Follow-up, • Communication OTHER INFORMATION • Frequent lifting of product up to 50 lbs. during the shift, infrequent lifting to 80 lbs., • Must be able to climb on and off the box of the truck, • Frequent bending, squatting, pushing, and pulling, • Must be able to work in confined spaces

Company: US3080 Sygma Florida (The Sygma Network, Inc) Sales Territory: None Zip Code: 32837 Travel Percentage: 0 COMPENSATION INFORMATION: The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factors POSITION SUMMARY: To serve our customers by safely and efficiently transporting product from the warehouse by driving a tractor trailer to various customers and properly delivering and unloading product according to customer invoices and company standards. ESSENTIAL FUNCTIONS/RESPONSIBILITIES: • Safely transports product from the warehouse to the customer location and ensures product is delivered on a timely basis, according to assigned route., • Unloads product from trailer, by hand or using hand cart down ramps, stairs, or docks, in all weather conditions and places in designated customer storage areas according to customer specifications and company standards (e.g. handling product according to preferred work methods, scanning product as it is delivered into the store)., • Picks up, loads and unloads damaged goods and customer returns, and transports products back to SYGMA warehouse., • Ensures all paperwork is completed according to established company and governmental guidelines (e.g. DOT electronic or manual logs, inspections, company vehicle maintenance reports and pre and post-trip reports are completed accurately and submitted on a timely basis, ensures all invoices are accurate and turned in daily and all damages and shortages are reported promptly)., • Ensures all food safety protocols are met according to established guidelines (e.g. proper temperatures are maintained in the delivery vehicle, product is inspected for visible damages prior to delivery, product is delivered and stored to prevent cross contamination) and maintains sanitary conditions in tractor and trailer; assists with maintaining sanitary conditions in the warehouse and yard., • Follows preferred work methods at all times, and immediately advises management team of any unsafe conditions., • Maintains and safely operates all assigned equipment, including but not limited to hand cart, pallets, load bars, SLS unit, and personal protective equipment., • Develops and establishes good relationships with customers by providing excellent and courteous service with clear communication., • Communicates with management team regarding any deviations to route, trailer or loading issues and/or customer or product issues., • Safely transports product picked up via backhauls and line hauls and ensures picked up product is correct and is delivered on a timely basis, according to established company standards., • Works assigned schedule and works outside usual work schedule as needed to meet customer needs; exhibits regular and predictable attendance. Other duties as assigned by Management. REQUIRED MINIMUM EDUCATION/EXPERIENCE • High school diploma/GED/equivalent degree, plus 1 year of tractor trailer driving experience preferred. Completion of a tractor trailer driving school will be accepted instead of, or in addition to a high school diploma., • Commercial Vehicle Drivers must have the ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records. CERTIFICATIONS AND/OR TECHNICAL REQUIREMENTS: • Valid Class A Commercial Driver’s License. Must be insurable to operate a vehicle as a condition of initial and continued employment. KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of: DOT regulations; Hazmat guidelines; Safe lifting and delivery practices. Skill in: driving over long distances, over a variety of terrains and in varying weather conditions, communicating with customers; solving problems; delivering product. Ability to: drive a tractor-trailer unit both in the day and at night in a variety of traffic and weather conditions and remain alert and aware of surroundings; meet or exceed minimum productivity levels established by the Company; handle hazardous materials and food and restaurant items that are frozen, dry and refrigerated; operate a 3 axle tractor, 45' - 48' trailer, straight truck, on board computer, key pad and a 2 wheel hand cart; read, write and communicate in English as it relates to the job and to the safety regulations; perform basic math functions (e.g. add, subtract, multiply, divide); effectively plan and organize work activities independent of direct supervision; solve problems. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. • While performing the duties of this job, the associate is regularly required to sit, talk and hear. The associate is frequently required to lift, push, or move product that weighs up to up to 100 pounds by hand and push/pull up to 350 pounds of product with a 2-wheeled hand card down a ramp and into the customer’s storage areas; climb in and out of a tractor and trailer; reach to stack and unstack pallets and hand cart; bend and twist while loading and unloading product, and retrieving items from trailer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of the job. • While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate usually works an overnight schedule, including weekends, holidays, overtime, on-call and starting at various times are required in order to successfully meet customers’ needs. The associate is occasionally exposed to high, precarious places. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Overtime hours, working weekends and holidays, and starting at various start times are required in order to successfully meet customers’ needs. NOTICE: The above statements are intended to describe the general nature of the environment and level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job related duties requested by his or her supervisor. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. EEO/AA Employer BENEFITS INFORMATION: For information on Sysco’s Benefits, please visit https://SyscoBenefits.com OVERVIEW: Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Company: US3080 Sygma Florida (The Sygma Network, Inc) Sales Territory: None Zip Code: 32837 Travel Percentage: 0 COMPENSATION INFORMATION: The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factors POSITION SUMMARY: To serve our customers by safely and efficiently transporting product from the warehouse by driving a tractor trailer to various customers and properly delivering and unloading product according to customer invoices and company standards. ESSENTIAL FUNCTIONS/RESPONSIBILITIES: • Safely transports product from the warehouse to the customer location and ensures product is delivered on a timely basis, according to assigned route., • Unloads product from trailer, by hand or using hand cart down ramps, stairs, or docks, in all weather conditions and places in designated customer storage areas according to customer specifications and company standards (e.g. handling product according to preferred work methods, scanning product as it is delivered into the store)., • Picks up, loads and unloads damaged goods and customer returns, and transports products back to SYGMA warehouse., • Ensures all paperwork is completed according to established company and governmental guidelines (e.g. DOT electronic or manual logs, inspections, company vehicle maintenance reports and pre and post-trip reports are completed accurately and submitted on a timely basis, ensures all invoices are accurate and turned in daily and all damages and shortages are reported promptly)., • Ensures all food safety protocols are met according to established guidelines (e.g. proper temperatures are maintained in the delivery vehicle, product is inspected for visible damages prior to delivery, product is delivered and stored to prevent cross contamination) and maintains sanitary conditions in tractor and trailer; assists with maintaining sanitary conditions in the warehouse and yard., • Follows preferred work methods at all times, and immediately advises management team of any unsafe conditions., • Maintains and safely operates all assigned equipment, including but not limited to hand cart, pallets, load bars, SLS unit, and personal protective equipment., • Develops and establishes good relationships with customers by providing excellent and courteous service with clear communication., • Communicates with management team regarding any deviations to route, trailer or loading issues and/or customer or product issues., • Safely transports product picked up via backhauls and line hauls and ensures picked up product is correct and is delivered on a timely basis, according to established company standards., • Works assigned schedule and works outside usual work schedule as needed to meet customer needs; exhibits regular and predictable attendance. Other duties as assigned by Management. REQUIRED MINIMUM EDUCATION/EXPERIENCE • High school diploma/GED/equivalent degree, plus 1 year of tractor trailer driving experience preferred. Completion of a tractor trailer driving school will be accepted instead of, or in addition to a high school diploma., • Commercial Vehicle Drivers must have the ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records. CERTIFICATIONS AND/OR TECHNICAL REQUIREMENTS: • Valid Class A Commercial Driver’s License. Must be insurable to operate a vehicle as a condition of initial and continued employment. KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of: DOT regulations; Hazmat guidelines; Safe lifting and delivery practices. Skill in: driving over long distances, over a variety of terrains and in varying weather conditions, communicating with customers; solving problems; delivering product. Ability to: drive a tractor-trailer unit both in the day and at night in a variety of traffic and weather conditions and remain alert and aware of surroundings; meet or exceed minimum productivity levels established by the Company; handle hazardous materials and food and restaurant items that are frozen, dry and refrigerated; operate a 3 axle tractor, 45' - 48' trailer, straight truck, on board computer, key pad and a 2 wheel hand cart; read, write and communicate in English as it relates to the job and to the safety regulations; perform basic math functions (e.g. add, subtract, multiply, divide); effectively plan and organize work activities independent of direct supervision; solve problems. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. • While performing the duties of this job, the associate is regularly required to sit, talk and hear. The associate is frequently required to lift, push, or move product that weighs up to up to 100 pounds by hand and push/pull up to 350 pounds of product with a 2-wheeled hand card down a ramp and into the customer’s storage areas; climb in and out of a tractor and trailer; reach to stack and unstack pallets and hand cart; bend and twist while loading and unloading product, and retrieving items from trailer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of the job. • While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate usually works an overnight schedule, including weekends, holidays, overtime, on-call and starting at various times are required in order to successfully meet customers’ needs. The associate is occasionally exposed to high, precarious places. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Overtime hours, working weekends and holidays, and starting at various start times are required in order to successfully meet customers’ needs. NOTICE: The above statements are intended to describe the general nature of the environment and level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job related duties requested by his or her supervisor. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. EEO/AA Employer BENEFITS INFORMATION: For information on Sysco’s Benefits, please visit https://SyscoBenefits.com OVERVIEW: Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Company: US3080 Sygma Florida (The Sygma Network, Inc) Sales Territory: None Zip Code: 32837 Travel Percentage: 0 COMPENSATION INFORMATION: The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factors POSITION SUMMARY: To serve our customers by safely and efficiently transporting product from the warehouse by driving a tractor trailer to various customers and properly delivering and unloading product according to customer invoices and company standards. ESSENTIAL FUNCTIONS/RESPONSIBILITIES: • Safely transports product from the warehouse to the customer location and ensures product is delivered on a timely basis, according to assigned route., • Unloads product from trailer, by hand or using hand cart down ramps, stairs, or docks, in all weather conditions and places in designated customer storage areas according to customer specifications and company standards (e.g. handling product according to preferred work methods, scanning product as it is delivered into the store)., • Picks up, loads and unloads damaged goods and customer returns, and transports products back to SYGMA warehouse., • Ensures all paperwork is completed according to established company and governmental guidelines (e.g. DOT electronic or manual logs, inspections, company vehicle maintenance reports and pre and post-trip reports are completed accurately and submitted on a timely basis, ensures all invoices are accurate and turned in daily and all damages and shortages are reported promptly)., • Ensures all food safety protocols are met according to established guidelines (e.g. proper temperatures are maintained in the delivery vehicle, product is inspected for visible damages prior to delivery, product is delivered and stored to prevent cross contamination) and maintains sanitary conditions in tractor and trailer; assists with maintaining sanitary conditions in the warehouse and yard., • Follows preferred work methods at all times, and immediately advises management team of any unsafe conditions., • Maintains and safely operates all assigned equipment, including but not limited to hand cart, pallets, load bars, SLS unit, and personal protective equipment., • Develops and establishes good relationships with customers by providing excellent and courteous service with clear communication., • Communicates with management team regarding any deviations to route, trailer or loading issues and/or customer or product issues., • Safely transports product picked up via backhauls and line hauls and ensures picked up product is correct and is delivered on a timely basis, according to established company standards., • Works assigned schedule and works outside usual work schedule as needed to meet customer needs; exhibits regular and predictable attendance. Other duties as assigned by Management. REQUIRED MINIMUM EDUCATION/EXPERIENCE • High school diploma/GED/equivalent degree, plus 1 year of tractor trailer driving experience preferred. Completion of a tractor trailer driving school will be accepted instead of, or in addition to a high school diploma., • Commercial Vehicle Drivers must have the ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records. CERTIFICATIONS AND/OR TECHNICAL REQUIREMENTS: • Valid Class A Commercial Driver’s License. Must be insurable to operate a vehicle as a condition of initial and continued employment. KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of: DOT regulations; Hazmat guidelines; Safe lifting and delivery practices. Skill in: driving over long distances, over a variety of terrains and in varying weather conditions, communicating with customers; solving problems; delivering product. Ability to: drive a tractor-trailer unit both in the day and at night in a variety of traffic and weather conditions and remain alert and aware of surroundings; meet or exceed minimum productivity levels established by the Company; handle hazardous materials and food and restaurant items that are frozen, dry and refrigerated; operate a 3 axle tractor, 45' - 48' trailer, straight truck, on board computer, key pad and a 2 wheel hand cart; read, write and communicate in English as it relates to the job and to the safety regulations; perform basic math functions (e.g. add, subtract, multiply, divide); effectively plan and organize work activities independent of direct supervision; solve problems. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. • While performing the duties of this job, the associate is regularly required to sit, talk and hear. The associate is frequently required to lift, push, or move product that weighs up to up to 100 pounds by hand and push/pull up to 350 pounds of product with a 2-wheeled hand card down a ramp and into the customer’s storage areas; climb in and out of a tractor and trailer; reach to stack and unstack pallets and hand cart; bend and twist while loading and unloading product, and retrieving items from trailer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of the job. • While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate usually works an overnight schedule, including weekends, holidays, overtime, on-call and starting at various times are required in order to successfully meet customers’ needs. The associate is occasionally exposed to high, precarious places. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Overtime hours, working weekends and holidays, and starting at various start times are required in order to successfully meet customers’ needs. NOTICE: The above statements are intended to describe the general nature of the environment and level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job related duties requested by his or her supervisor. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. EEO/AA Employer BENEFITS INFORMATION: For information on Sysco’s Benefits, please visit https://SyscoBenefits.com OVERVIEW: Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Company: US3080 Sygma Florida (The Sygma Network, Inc) Sales Territory: None Zip Code: 32837 Travel Percentage: 0 COMPENSATION INFORMATION: The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factors POSITION SUMMARY: To serve our customers by safely and efficiently transporting product from the warehouse by driving a tractor trailer to various customers and properly delivering and unloading product according to customer invoices and company standards. ESSENTIAL FUNCTIONS/RESPONSIBILITIES: • Safely transports product from the warehouse to the customer location and ensures product is delivered on a timely basis, according to assigned route., • Unloads product from trailer, by hand or using hand cart down ramps, stairs, or docks, in all weather conditions and places in designated customer storage areas according to customer specifications and company standards (e.g. handling product according to preferred work methods, scanning product as it is delivered into the store)., • Picks up, loads and unloads damaged goods and customer returns, and transports products back to SYGMA warehouse., • Ensures all paperwork is completed according to established company and governmental guidelines (e.g. DOT electronic or manual logs, inspections, company vehicle maintenance reports and pre and post-trip reports are completed accurately and submitted on a timely basis, ensures all invoices are accurate and turned in daily and all damages and shortages are reported promptly)., • Ensures all food safety protocols are met according to established guidelines (e.g. proper temperatures are maintained in the delivery vehicle, product is inspected for visible damages prior to delivery, product is delivered and stored to prevent cross contamination) and maintains sanitary conditions in tractor and trailer; assists with maintaining sanitary conditions in the warehouse and yard., • Follows preferred work methods at all times, and immediately advises management team of any unsafe conditions., • Maintains and safely operates all assigned equipment, including but not limited to hand cart, pallets, load bars, SLS unit, and personal protective equipment., • Develops and establishes good relationships with customers by providing excellent and courteous service with clear communication., • Communicates with management team regarding any deviations to route, trailer or loading issues and/or customer or product issues., • Safely transports product picked up via backhauls and line hauls and ensures picked up product is correct and is delivered on a timely basis, according to established company standards., • Works assigned schedule and works outside usual work schedule as needed to meet customer needs; exhibits regular and predictable attendance. Other duties as assigned by Management. REQUIRED MINIMUM EDUCATION/EXPERIENCE • High school diploma/GED/equivalent degree, plus 1 year of tractor trailer driving experience preferred. Completion of a tractor trailer driving school will be accepted instead of, or in addition to a high school diploma., • Commercial Vehicle Drivers must have the ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records. CERTIFICATIONS AND/OR TECHNICAL REQUIREMENTS: • Valid Class A Commercial Driver’s License. Must be insurable to operate a vehicle as a condition of initial and continued employment. KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of: DOT regulations; Hazmat guidelines; Safe lifting and delivery practices. Skill in: driving over long distances, over a variety of terrains and in varying weather conditions, communicating with customers; solving problems; delivering product. Ability to: drive a tractor-trailer unit both in the day and at night in a variety of traffic and weather conditions and remain alert and aware of surroundings; meet or exceed minimum productivity levels established by the Company; handle hazardous materials and food and restaurant items that are frozen, dry and refrigerated; operate a 3 axle tractor, 45' - 48' trailer, straight truck, on board computer, key pad and a 2 wheel hand cart; read, write and communicate in English as it relates to the job and to the safety regulations; perform basic math functions (e.g. add, subtract, multiply, divide); effectively plan and organize work activities independent of direct supervision; solve problems. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. • While performing the duties of this job, the associate is regularly required to sit, talk and hear. The associate is frequently required to lift, push, or move product that weighs up to up to 100 pounds by hand and push/pull up to 350 pounds of product with a 2-wheeled hand card down a ramp and into the customer’s storage areas; climb in and out of a tractor and trailer; reach to stack and unstack pallets and hand cart; bend and twist while loading and unloading product, and retrieving items from trailer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of the job. • While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate usually works an overnight schedule, including weekends, holidays, overtime, on-call and starting at various times are required in order to successfully meet customers’ needs. The associate is occasionally exposed to high, precarious places. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Overtime hours, working weekends and holidays, and starting at various start times are required in order to successfully meet customers’ needs. NOTICE: The above statements are intended to describe the general nature of the environment and level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job related duties requested by his or her supervisor. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. EEO/AA Employer BENEFITS INFORMATION: For information on Sysco’s Benefits, please visit https://SyscoBenefits.com OVERVIEW: Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Company: US3080 Sygma Florida (The Sygma Network, Inc) Sales Territory: None Zip Code: 32837 Travel Percentage: 0 COMPENSATION INFORMATION: The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factors POSITION SUMMARY: To serve our customers by safely and efficiently transporting product from the warehouse by driving a tractor trailer to various customers and properly delivering and unloading product according to customer invoices and company standards. ESSENTIAL FUNCTIONS/RESPONSIBILITIES: • Safely transports product from the warehouse to the customer location and ensures product is delivered on a timely basis, according to assigned route., • Unloads product from trailer, by hand or using hand cart down ramps, stairs, or docks, in all weather conditions and places in designated customer storage areas according to customer specifications and company standards (e.g. handling product according to preferred work methods, scanning product as it is delivered into the store)., • Picks up, loads and unloads damaged goods and customer returns, and transports products back to SYGMA warehouse., • Ensures all paperwork is completed according to established company and governmental guidelines (e.g. DOT electronic or manual logs, inspections, company vehicle maintenance reports and pre and post-trip reports are completed accurately and submitted on a timely basis, ensures all invoices are accurate and turned in daily and all damages and shortages are reported promptly)., • Ensures all food safety protocols are met according to established guidelines (e.g. proper temperatures are maintained in the delivery vehicle, product is inspected for visible damages prior to delivery, product is delivered and stored to prevent cross contamination) and maintains sanitary conditions in tractor and trailer; assists with maintaining sanitary conditions in the warehouse and yard., • Follows preferred work methods at all times, and immediately advises management team of any unsafe conditions., • Maintains and safely operates all assigned equipment, including but not limited to hand cart, pallets, load bars, SLS unit, and personal protective equipment., • Develops and establishes good relationships with customers by providing excellent and courteous service with clear communication., • Communicates with management team regarding any deviations to route, trailer or loading issues and/or customer or product issues., • Safely transports product picked up via backhauls and line hauls and ensures picked up product is correct and is delivered on a timely basis, according to established company standards., • Works assigned schedule and works outside usual work schedule as needed to meet customer needs; exhibits regular and predictable attendance. Other duties as assigned by Management. REQUIRED MINIMUM EDUCATION/EXPERIENCE • High school diploma/GED/equivalent degree, plus 1 year of tractor trailer driving experience preferred. Completion of a tractor trailer driving school will be accepted instead of, or in addition to a high school diploma., • Commercial Vehicle Drivers must have the ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records. CERTIFICATIONS AND/OR TECHNICAL REQUIREMENTS: • Valid Class A Commercial Driver’s License. Must be insurable to operate a vehicle as a condition of initial and continued employment. KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of: DOT regulations; Hazmat guidelines; Safe lifting and delivery practices. Skill in: driving over long distances, over a variety of terrains and in varying weather conditions, communicating with customers; solving problems; delivering product. Ability to: drive a tractor-trailer unit both in the day and at night in a variety of traffic and weather conditions and remain alert and aware of surroundings; meet or exceed minimum productivity levels established by the Company; handle hazardous materials and food and restaurant items that are frozen, dry and refrigerated; operate a 3 axle tractor, 45' - 48' trailer, straight truck, on board computer, key pad and a 2 wheel hand cart; read, write and communicate in English as it relates to the job and to the safety regulations; perform basic math functions (e.g. add, subtract, multiply, divide); effectively plan and organize work activities independent of direct supervision; solve problems. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. • While performing the duties of this job, the associate is regularly required to sit, talk and hear. The associate is frequently required to lift, push, or move product that weighs up to up to 100 pounds by hand and push/pull up to 350 pounds of product with a 2-wheeled hand card down a ramp and into the customer’s storage areas; climb in and out of a tractor and trailer; reach to stack and unstack pallets and hand cart; bend and twist while loading and unloading product, and retrieving items from trailer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of the job. • While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate usually works an overnight schedule, including weekends, holidays, overtime, on-call and starting at various times are required in order to successfully meet customers’ needs. The associate is occasionally exposed to high, precarious places. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Overtime hours, working weekends and holidays, and starting at various start times are required in order to successfully meet customers’ needs. NOTICE: The above statements are intended to describe the general nature of the environment and level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job related duties requested by his or her supervisor. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. EEO/AA Employer BENEFITS INFORMATION: For information on Sysco’s Benefits, please visit https://SyscoBenefits.com OVERVIEW: Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Company: US3080 Sygma Florida (The Sygma Network, Inc) Sales Territory: None Zip Code: 32837 Travel Percentage: 0 COMPENSATION INFORMATION: The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factors POSITION SUMMARY: To serve our customers by safely and efficiently transporting product from the warehouse by driving a tractor trailer to various customers and properly delivering and unloading product according to customer invoices and company standards. ESSENTIAL FUNCTIONS/RESPONSIBILITIES: • Safely transports product from the warehouse to the customer location and ensures product is delivered on a timely basis, according to assigned route., • Unloads product from trailer, by hand or using hand cart down ramps, stairs, or docks, in all weather conditions and places in designated customer storage areas according to customer specifications and company standards (e.g. handling product according to preferred work methods, scanning product as it is delivered into the store)., • Picks up, loads and unloads damaged goods and customer returns, and transports products back to SYGMA warehouse., • Ensures all paperwork is completed according to established company and governmental guidelines (e.g. DOT electronic or manual logs, inspections, company vehicle maintenance reports and pre and post-trip reports are completed accurately and submitted on a timely basis, ensures all invoices are accurate and turned in daily and all damages and shortages are reported promptly)., • Ensures all food safety protocols are met according to established guidelines (e.g. proper temperatures are maintained in the delivery vehicle, product is inspected for visible damages prior to delivery, product is delivered and stored to prevent cross contamination) and maintains sanitary conditions in tractor and trailer; assists with maintaining sanitary conditions in the warehouse and yard., • Follows preferred work methods at all times, and immediately advises management team of any unsafe conditions., • Maintains and safely operates all assigned equipment, including but not limited to hand cart, pallets, load bars, SLS unit, and personal protective equipment., • Develops and establishes good relationships with customers by providing excellent and courteous service with clear communication., • Communicates with management team regarding any deviations to route, trailer or loading issues and/or customer or product issues., • Safely transports product picked up via backhauls and line hauls and ensures picked up product is correct and is delivered on a timely basis, according to established company standards., • Works assigned schedule and works outside usual work schedule as needed to meet customer needs; exhibits regular and predictable attendance. Other duties as assigned by Management. REQUIRED MINIMUM EDUCATION/EXPERIENCE • High school diploma/GED/equivalent degree, plus 1 year of tractor trailer driving experience preferred. Completion of a tractor trailer driving school will be accepted instead of, or in addition to a high school diploma., • Commercial Vehicle Drivers must have the ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records. CERTIFICATIONS AND/OR TECHNICAL REQUIREMENTS: • Valid Class A Commercial Driver’s License. Must be insurable to operate a vehicle as a condition of initial and continued employment. KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of: DOT regulations; Hazmat guidelines; Safe lifting and delivery practices. Skill in: driving over long distances, over a variety of terrains and in varying weather conditions, communicating with customers; solving problems; delivering product. Ability to: drive a tractor-trailer unit both in the day and at night in a variety of traffic and weather conditions and remain alert and aware of surroundings; meet or exceed minimum productivity levels established by the Company; handle hazardous materials and food and restaurant items that are frozen, dry and refrigerated; operate a 3 axle tractor, 45' - 48' trailer, straight truck, on board computer, key pad and a 2 wheel hand cart; read, write and communicate in English as it relates to the job and to the safety regulations; perform basic math functions (e.g. add, subtract, multiply, divide); effectively plan and organize work activities independent of direct supervision; solve problems. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. • While performing the duties of this job, the associate is regularly required to sit, talk and hear. The associate is frequently required to lift, push, or move product that weighs up to up to 100 pounds by hand and push/pull up to 350 pounds of product with a 2-wheeled hand card down a ramp and into the customer’s storage areas; climb in and out of a tractor and trailer; reach to stack and unstack pallets and hand cart; bend and twist while loading and unloading product, and retrieving items from trailer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of the job. • While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate usually works an overnight schedule, including weekends, holidays, overtime, on-call and starting at various times are required in order to successfully meet customers’ needs. The associate is occasionally exposed to high, precarious places. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Overtime hours, working weekends and holidays, and starting at various start times are required in order to successfully meet customers’ needs. NOTICE: The above statements are intended to describe the general nature of the environment and level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job related duties requested by his or her supervisor. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. EEO/AA Employer BENEFITS INFORMATION: For information on Sysco’s Benefits, please visit https://SyscoBenefits.com OVERVIEW: Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Company: US3080 Sygma Florida (The Sygma Network, Inc) Sales Territory: None Zip Code: 32837 Travel Percentage: 0 COMPENSATION INFORMATION: The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factors JOB SUMMARY: To serve our customers by safely and efficiently transporting product from the warehouse by driving a tractor-trailer to various destination points according to customer invoices and company standards. Responsibilities • Safely transports product from the warehouse to the customer location and ensures the product is delivered on a timely basis, according to assigned route; loads and unloads product according to customer specifications., • Ensures all paperwork is completed according to established company and governmental guidelines (e.g. DOT electronic or manual logs, inspections, company vehicle maintenance reports and pre and post-trip reports are completed accurately and submitted on a timely basis, ensures all invoices are accurate and case counts match bill of ladings)., • Ensures all food safety protocols are met according to established guidelines (e.g. proper temperatures are maintained in the delivery vehicle)., • Follows preferred work methods at all times, and immediately advises the management team of any unsafe conditions., • Maintains and safely operates all assigned equipment, including but not limited to pallets, load bars, SLS unit, and personal protective equipment., • Develops and establishes good relationships with customers by providing excellent and courteous service with clear communication., • Communicates with management team regarding any deviations to route, trailer or loading issues and/or customer or product issues., • Works assigned schedule and work outside the usual work schedule as needed to meet customer needs; exhibits regular and predictable attendance. Other duties as assigned by Management. QUALIFICATIONS Education/Experience • High school diploma/GED/equivalent degree, plus 1 year of tractor-trailer driving experience preferred., • Completion of a tractor-trailer driving school will be accepted instead of, or in addition to a high school diploma. Certifications and/or technical requirements Valid Class A Commercial Driver’s License. Must be insurable to operate a vehicle as a condition of initial and continued employment. Knowledge, Skills, and Abilities • Knowledge of: Department of Transportation (DOT) regulations; Hazmat guidelines; Safe lifting and delivery practices, • Skill in: driving over long distances, over a variety of terrains and in varying weather conditions, communicating with customers; solving problems; delivering the product, • Ability to: drive a tractor-trailer unit both in the day and at night in a variety of traffic and weather conditions and remain alert and aware of surroundings, • meet or exceed minimum productivity levels established by the Company, • Operate a 3 axle tractor, 45' - 48' trailer, straight truck, onboard computer, • keypad and a 2 wheel hand cart;, • Commercial Vehicle Drivers must have the ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records., • perform basic math functions (e.g. add, subtract, multiply, divide); effectively plan and organize work activities independent of direct supervision; solve problems Physical Demands • The physical demands described here are representative of those that must be met by an associate to successfully perform the, • essential functions of this job., • While performing the duties of this job, the associate is regularly required to sit, talk and hear., • The associate is occasionally required to lift, push, or move product that weighs up to up to 50 pounds by hand and push/pulls up to 350 pounds of product with a 2-wheeled hand cart down a ramp and into the customer’s storage areas, • climb in and out of a tractor and trailer, • vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those associate encounters while performing the essential functions of the job. • While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions, • Moving mechanical parts and may be required to work in confined spaces., • The associate usually works an overnight schedule, including weekends, holidays, overtime, on-call and starting at various times are required in order to successfully meet customers’ needs., • The associate is occasionally exposed to high, precarious places., • The associate is occasionally exposed to fumes or airborne particles., • The noise level in the work environment is usually moderate., • Overtime hours, working weekends and holidays, and starting at various start times are required in order to successfully meet customers’ needs. NOTICE: The above statements are intended to describe the general nature of the environment and the level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job-related duties requested by his or her supervisor. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. EEO/AA Employer BENEFITS INFORMATION: For information on Sysco’s Benefits, please visit https://SyscoBenefits.com OVERVIEW: Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Company: US3080 Sygma Florida (The Sygma Network, Inc) Sales Territory: None Zip Code: 32837 Travel Percentage: 0 COMPENSATION INFORMATION: The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factors POSITION SUMMARY: To serve our customers by safely and efficiently transporting product from the warehouse by driving a tractor trailer to various customers and properly delivering and unloading product according to customer invoices and company standards. ESSENTIAL FUNCTIONS/RESPONSIBILITIES: • Safely transports product from the warehouse to the customer location and ensures product is delivered on a timely basis, according to assigned route., • Unloads product from trailer, by hand or using hand cart down ramps, stairs, or docks, in all weather conditions and places in designated customer storage areas according to customer specifications and company standards (e.g. handling product according to preferred work methods, scanning product as it is delivered into the store)., • Picks up, loads and unloads damaged goods and customer returns, and transports products back to SYGMA warehouse., • Ensures all paperwork is completed according to established company and governmental guidelines (e.g. DOT electronic or manual logs, inspections, company vehicle maintenance reports and pre and post-trip reports are completed accurately and submitted on a timely basis, ensures all invoices are accurate and turned in daily and all damages and shortages are reported promptly)., • Ensures all food safety protocols are met according to established guidelines (e.g. proper temperatures are maintained in the delivery vehicle, product is inspected for visible damages prior to delivery, product is delivered and stored to prevent cross contamination) and maintains sanitary conditions in tractor and trailer; assists with maintaining sanitary conditions in the warehouse and yard., • Follows preferred work methods at all times, and immediately advises management team of any unsafe conditions., • Maintains and safely operates all assigned equipment, including but not limited to hand cart, pallets, load bars, SLS unit, and personal protective equipment., • Develops and establishes good relationships with customers by providing excellent and courteous service with clear communication., • Communicates with management team regarding any deviations to route, trailer or loading issues and/or customer or product issues., • Safely transports product picked up via backhauls and line hauls and ensures picked up product is correct and is delivered on a timely basis, according to established company standards., • Works assigned schedule and works outside usual work schedule as needed to meet customer needs; exhibits regular and predictable attendance. Other duties as assigned by Management. REQUIRED MINIMUM EDUCATION/EXPERIENCE • High school diploma/GED/equivalent degree, plus 1 year of tractor trailer driving experience preferred. Completion of a tractor trailer driving school will be accepted instead of, or in addition to a high school diploma., • Commercial Vehicle Drivers must have the ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records. CERTIFICATIONS AND/OR TECHNICAL REQUIREMENTS: • Valid Class A Commercial Driver’s License. Must be insurable to operate a vehicle as a condition of initial and continued employment. KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of: DOT regulations; Hazmat guidelines; Safe lifting and delivery practices. Skill in: driving over long distances, over a variety of terrains and in varying weather conditions, communicating with customers; solving problems; delivering product. Ability to: drive a tractor-trailer unit both in the day and at night in a variety of traffic and weather conditions and remain alert and aware of surroundings; meet or exceed minimum productivity levels established by the Company; handle hazardous materials and food and restaurant items that are frozen, dry and refrigerated; operate a 3 axle tractor, 45' - 48' trailer, straight truck, on board computer, key pad and a 2 wheel hand cart; read, write and communicate in English as it relates to the job and to the safety regulations; perform basic math functions (e.g. add, subtract, multiply, divide); effectively plan and organize work activities independent of direct supervision; solve problems. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. • While performing the duties of this job, the associate is regularly required to sit, talk and hear. The associate is frequently required to lift, push, or move product that weighs up to up to 100 pounds by hand and push/pull up to 350 pounds of product with a 2-wheeled hand card down a ramp and into the customer’s storage areas; climb in and out of a tractor and trailer; reach to stack and unstack pallets and hand cart; bend and twist while loading and unloading product, and retrieving items from trailer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of the job. • While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate usually works an overnight schedule, including weekends, holidays, overtime, on-call and starting at various times are required in order to successfully meet customers’ needs. The associate is occasionally exposed to high, precarious places. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Overtime hours, working weekends and holidays, and starting at various start times are required in order to successfully meet customers’ needs. NOTICE: The above statements are intended to describe the general nature of the environment and level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job related duties requested by his or her supervisor. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. EEO/AA Employer BENEFITS INFORMATION: For information on Sysco’s Benefits, please visit https://SyscoBenefits.com OVERVIEW: Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Job Description Technicians/Mechanics (Link Belt Crane) South Florida Caterpillar dealer seeking experienced Technicians/Mechanics with Link-Belt Crane or similar type of crane repair experience. The primary functions of this position are to determine the status of service needed for various crane construction equipment and perform the necessary service, preventive maintenance, repairs, replacements, installations, or rebuilding of parts to restore the equipment to proper operation. Qualified candidates must have the following skills or abilities: Troubleshoot and perform complex link belt crane repairs correctly. At least 5 years of troubleshooting and repair skills on link belt cranes, mobile cranes, crawlers, rough terrain cranes, and hydraulic cranes. Must have your own set of hand tools. Ability to work with limited supervision. High school graduate. Mechanical aptitude is needed. Must have a valid and clean driver’s license. 5K signing bonus after the successful completion of 90 days! \nCompany Description Kelly Tractor Co. serves its customers with a wide variety of machines from some of the world’s foremost manufacturers, including but not limited to: ABI Hose reels, Caterpillar, CAT Lift trucks, Genie aerial lifts, Harlo, JLG scissor lifts, Jungheinrich lift trucks, Kalmar, Mitsubishi Forklift Trucks, IMT Drill Rigs, Landpride, Link-Belt Cranes, Marden Industries, Massey Ferguson AG Tractors, Fendt Rogator, Schulte, Sullair, Sullivan Palatek, Supertrak, Terragator, Wacker Neuson, Weiler paving products and many more! Since 1933, Kelly Tractor Co. has provided rentals, leasing, sales and servicing of all types of construction and industrial equipment to the following markets: highway and bridge building, water and sewer, land development, housing, aggregate quarries, agriculture, warehousing, seaports, marinas, and other markets. Kelly Tractor Co. and its affiliates employ more than 500 people in South Florida and more than 150 of them provide parts and service support. The company is headquartered in a 240,000 square-foot complex in Miami, with branch locations in Davie, West Palm Beach, Clewiston, Fort Myers, Fort Pierce, Orlando (CAT/Used forklifts and Link-Belt cranes, and Mulberry (IMT drill rigs, Link-Belt Cranes). Kelly Tractor Co. serves its customers with a wide variety of machines from some of the world’s foremost manufacturers, including but not limited to: ABI Hose reels, Caterpillar, CAT Lift trucks, Genie aerial lifts, Harlo, JLG scissor lifts, Jungheinrich lift trucks, Kalmar, Mitsubishi Forklift Trucks, IMT Drill Rigs, Landpride, Link-Belt Cranes, Marden Industries, Massey Ferguson AG Tractors, Fendt Rogator, Schulte, Sullair, Sullivan Palatek, Supertrak, Terragator, Wacker Neuson, Weiler paving products and many more!\r\nSince 1933, Kelly Tractor Co. has provided rentals, leasing, sales and servicing of all types of construction and industrial equipment to the following markets: highway and bridge building, water and sewer, land development, housing, aggregate quarries, agriculture, warehousing, seaports, marinas, and other markets.\r\nKelly Tractor Co. and its affiliates employ more than 500 people in South Florida and more than 150 of them provide parts and service support. The company is headquartered in a 240,000 square-foot complex in Miami, with branch locations in Davie, West Palm Beach, Clewiston, Fort Myers, Fort Pierce, Orlando (CAT/Used forklifts and Link-Belt cranes, and Mulberry (IMT drill rigs, Link-Belt Cranes).

Job Description The Trailer Technician is responsible for performing preventative maintenance procedures and minor repairs on trailers with little or no supervision. Such procedures/repairs include Federal Highway Inspections, light/heavy welding, wheel end repairs, full electrical system repair, minor body repairs, and liftgate experience. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Meets daily with Service Manager and other operations personnel to discuss filling upcoming orders and demands for equipment., • Uses repair orders to record all work performed and submits a list of equipment numbers completed each day., • Ensures compliance with all federal, state, and local government and company standards for reliability and safety., • Oversees shipping/receiving responsibilities, including inspecting, storing, and retrieving inventory., • Drives and spots equipment in yard., • Reports all costs of equipment added to fleet., • Responsible for the repair and maintenance of class 8 trailers., • Logs hours spent on repairs., • Fabricates and welds, custom designs and installs interiors into trailers., • Works in a safe manner., • Other duties may be assigned. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE A High School diploma or general education degree (GED); or two years verifiable equipment maintenance related experience and/or training; or an equivalent combination of education and experience in equipment maintenance and repair. OTHER SKILLS AND ABILITIES: • Strong work ethic and a desire to succeed., • Excellent communication skills, both oral and written., • Attention to detail and highly organized., • One to two years welding experience including fabrication of metal parts and assemblies., • 1 Plus years of experience performing FHWA Inspection., • 1 Plus years of experience Troubleshooting and repairing ABS., • 1 Plus years of experience Troubleshooting, repairing and replacing brake components. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, and governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Communicates with a wide range of individuals from yard staff to upper management. MATHEMATICAL SKILLS Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to apply concepts of basic algebra and geometry. Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand, walk, reach with hands and arms, and stoop, kneel, crouch or crawl. The employee regularly is required to sit. The employee is frequently required to talk or hear; use hands to finger, handle or feel; and to reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, and ability to adjust focus. Must operate equipment such as phone, computer, copy machine, fax machine, fork truck, yard goat, hand tools, welding equipment and refrigerated trailers. CERTIFICATES, LICENSES AND REGISTRATIONS A valid driver’s license issued in state of employment. WORK ENVIRONMENT While performing the duties of this job, the employee is regularly exposed to working near moving mechanical parts, working in high precarious places, toxic or caustic chemicals, and risk of electrical shock. The employee is frequently exposed to fumes or airborne particles. The noise level in the work environment is usually moderate to loud. The employee will be exposed to extremes in temperature and environmental conditions. The employee may work in a shop, yard or out of a mobile service vehicle. The candidate must be able to pass a pre-employment background check. Mckinney Trailers is an Equal Opportunity Employer \nCompany Description For over 35 years, Mckinney Trailers has led the way in trailer rentals and leasing across the United States. With a fleet of over 40,000 units and 20 branch locations strategically located near key distribution hubs, we provide a wide variety of semi-trailer types for clients across all industries. Our services include full-service maintenance, semi-trailer sales and purchases, as well as parking and transportation solutions. Known for high-quality equipment and outstanding customer service, Mckinney is the trusted partner you need in logistics. Rent, Lease or Buy from Mckinney Trailers. Visit https://www.mckinneytrailers.com For over 35 years, Mckinney Trailers has led the way in trailer rentals and leasing across the United States. With a fleet of over 40,000 units and 20 branch locations strategically located near key distribution hubs, we provide a wide variety of semi-trailer types for clients across all industries. Our services include full-service maintenance, semi-trailer sales and purchases, as well as parking and transportation solutions. Known for high-quality equipment and outstanding customer service, Mckinney is the trusted partner you need in logistics.\r\n\r\nRent, Lease or Buy from Mckinney Trailers.\r\nVisit https://www.mckinneytrailers.com

Job DescriptionAbout the Role We are looking for Autonomous Vehicle Safety Operators (Safety Drivers) to support the testing, validation, commercial deployment, and scaling of autonomous vehicle (AV) and robotaxi fleets across North America. As an Autonomous Vehicle Safety Operator, you will play a critical role in ensuring the safe operation of self-driving vehicles during testing, pilot programs, and commercial autonomous ride-hailing services. Working closely with engineering, fleet operations, and depot teams, you will monitor vehicle behaviour, ensure compliance with operational procedures, and safely intervene whenever required. No previous autonomous vehicle experience is required. We provide comprehensive training on autonomous driving systems, operational procedures, and safety protocols. We are looking for experienced, responsible drivers with excellent situational awareness who are excited to contribute to the future of mobility. This position offers the opportunity to work with some of the world's most advanced autonomous vehicle technologies, supporting robotaxi launches, fleet expansion, and commercial autonomous transportation across multiple cities. Key Responsibilities Autonomous Vehicle Operations • Safely operate and monitor autonomous vehicles during testing, validation, and commercial robotaxi fleet operations., • Continuously supervise the performance of the self-driving system while maintaining full awareness of surrounding traffic conditions., • Take immediate manual control of the vehicle whenever required by operational procedures or safety protocols., • Complete assigned routes while ensuring compliance with local traffic regulations and company operating procedures., • Support the successful deployment of autonomous ride-hailing services by maintaining safe and consistent vehicle operation.Fleet Readiness & Vehicle Inspection, • Conduct pre-trip and post-trip inspections to ensure each autonomous vehicle is deployment-ready., • Verify vehicle cleanliness and inspect cameras, sensors, mirrors, lighting, and other critical systems before each shift., • Report any damage, abnormal vehicle behaviour, or maintenance concerns to depot and technical teams., • Support overall fleet readiness by ensuring vehicles remain available for daily operations.Data Collection & Operational Reporting, • Record disengagements, observations, and operational events using company reporting tools., • Provide clear, structured feedback on vehicle behaviour, traffic conditions, and unusual scenarios encountered during testing or commercial operations., • Assist engineering teams by documenting situations that improve the performance of autonomous driving systems., • Maintain accurate operational records and complete all required documentation.Safety & Compliance, • Follow all operational procedures, safety protocols, and regulatory requirements., • Participate in ongoing training, certification, and safety refreshers., • Maintain professionalism when interacting with members of the public during autonomous vehicle testing and robotaxi operations., • Support continuous improvement initiatives aimed at increasing the safety and efficiency of autonomous fleet operations.Requirements Essential, • Valid driver's license., • Minimum 5 years of driving experience., • Clean driving record with no major violations., • Ability to successfully pass a background verification (BGV)., • Ability to pass pre-employment and random drug and alcohol screening., • Excellent situational awareness and defensive driving skills., • Comfortable driving for extended periods in urban and highway environments., • Ability to follow detailed operational procedures with high attention to detail., • Strong communication and reporting skills., • Upper-Intermediate English.Preferred, • Experience as a professional driver, fleet driver, chauffeur, ride-hailing driver, or vehicle tester., • Previous experience supporting automotive testing, ADAS validation, mapping, or fleet operations., • Familiarity with electric vehicles (EVs)., • Experience working in shift-based or 24/7 operational environments.What We're Looking For Successful Autonomous Vehicle Safety Operators are calm under pressure, highly observant, and committed to safety. They enjoy working with emerging technologies and understand the importance of consistency, accuracy, and procedural compliance in supporting autonomous vehicle deployment and robotaxi fleet operations. You do not need previous experience working with autonomous vehicles - our comprehensive training program will prepare you to safely support the testing, deployment, and commercial operation of self-driving vehicles. What We Offer • Opportunity to work on some of most advanced autonomous vehicle and robotaxi programs., • Comprehensive training on autonomous driving systems and operational procedures., • Long-term career opportunities within the rapidly growing autonomous mobility industry., • Exposure to cutting-edge robotics, artificial intelligence, and autonomous transportation technologies., • International projects supporting robotaxi launches, new city deployments, and fleet scaling across North America., • A collaborative environment working alongside engineering, operations, and technical specialists developing the future of autonomous ride-hailing services. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Starting pay: $15 per hour Service area: 26133 US Highway 19 North, ORLANDO, FL, 32805 and surrounding communities Opportunity type: Independent contractor (1099) Schedule: Choose assignments based on your availability Sign-on bonus: $500 for eligible caregivers. See details below. Caregiver Services Inc. (CSI), a Help at Home company, is a Florida-licensed nurse registry. We are registering Home Health Aides (HHAs) and Certified Nursing Assistants (CNAs) to provide private duty care to seniors and adults in their homes in Florida. About the Opportunity This is a 1099 independent contractor opportunity, not employment. CSI refers caregivers to clients who need in-home care. You decide which client assignments to accept based on your availability, preferred service area, and experience. Assignment availability and hours vary by location and client needs. Qualifications • Current CPR certification required., • Active Florida Certified Nursing Assistant (CNA) license or a Home Health Aide (HHA) certificate showing completion of at least 40 hours of HHA training from an approved Florida school., • Ability to communicate effectively in English, verbally and in writing., • Valid government-issued ID., • Completion of state-required training., • Florida Level 2 background screening through the AHCA Clearinghouse., • Ability to perform the services required for the assignments you accept. Services You May Provide Depending on each client’s plan of care and within the scope of your certification or training, services may include: • Assistance with personal care, including bathing, dressing, and grooming., • Meal preparation and mealtime assistance., • Safe mobility and transfer assistance., • Companionship and assistance with daily activities., • Light housekeeping and laundry support., • Errands or transportation, where applicable., • Observing and reporting changes in a client’s condition as required. Why Register With CSI • Starting pay of $15 per hour., • Weekly payments by direct deposit., • Freedom to choose assignments that fit your schedule., • One-on-one private duty care in clients’ homes., • Local client matching to help reduce travel time., • A support line available 24/7., • Quick, straightforward registration., • A $500 sign-on bonus for eligible caregivers, subject to the requirements below. About CSI Caregiver Services Inc., a Help at Home company, is a Florida-licensed nurse registry that connects caregivers with clients who need care in their homes. Veterans, active-duty service members, and military spouses are welcome to register. Independent Contractor Status Caregivers referred by CSI are independent contractors, not employees of Caregiver Services Inc. As a self-employed contractor, you are responsible for your own taxes, insurance, and business obligations. If you are a Florida HHA or CNA looking for flexible private duty opportunities in your community, apply today to begin registration. $500 Sign-On Bonus Details The $500 bonus is available to eligible 1099 caregivers in Florida who start with a client on or after February 1, 2026. • Complete 500 service hours within one year of your start date., • Be active and in good standing when the bonus is paid., • Receive the bonus in one installment within 30 days of meeting all requirements., • New caregivers and returning caregivers who have been inactive for 60 days or more are eligible., • Caregivers transferring from another Help at Home location or company are not eligible., • To claim the bonus, track your hours and submit a request to the contractor payments team once you qualify. AHCA Licenses: 3002096, 30211337, 30210968, 30210967, 30210964, 30211593, 3012096, 30211343, 30211018, 3032096, 30210956, 30211345, 30211388, 1189 Sign-on Bonus Details *$500 sign-on bonus is valid for eligible 1099 Caregivers in Florida. This bonus is available to caregivers who start with a client on or after February 1, 2026. The sign-on bonus is paid in one installment of $500 after the caregiver has completed 500 worked hours. The caregiver must be active and in good standing at the time of bonus payout. The required 500 worked hours must be completed by the one-year anniversary of the caregiver’s start date to be eligible for the bonus. Bonuses will be paid within 30 days of meeting all eligibility requirements. New caregivers, as well as previous caregivers who have been inactive for 60 days or more, are eligible for the bonus. Caregivers transferring from another Help at Home location, entity, or organization within the Help at Home portfolio of companies are not eligible to receive the bonus. 1099 Caregivers must track hours and submit bonus requests to payroll upon meeting all requirements. Data Security and Privacy Statement At Help at Home, we prioritize protecting your personal information during the hiring process. We comply with all relevant data privacy regulations, including HIPAA and SOX where applicable. Your data will only be used to assess your employment suitability and won't be shared with unauthorized parties. We use strong security measures to protect your information from unauthorized access or disclosure. By submitting your application, you consent to this process. You can access, modify, or request deletion of your data by contacting us. Employees must adhere to our data protection policies and legal requirements to safeguard sensitive information.

Job DescriptionJob Title: Pipe Laborer Craft: Pipe Reports to: Foreman Exempt Status: Non-Exempt (Hourly) Position Objective/Description: Performs a variety of manual construction tasks under the direction of a crew foreman. Essential Duties and Responsibilities: • Performs a variety of tasks involving strenuous manual labor in heavy/highway construction projects, • Work site set up, maintenance, and cleanup, to include scaffolding construction and dismantling, barricade locating, and equipment locating., • Load, unload, or distribute materials, machinery, or tools to and from designated locations, • Direct traffic at or near building sites and carry out other traffic management activities, • Dig ditches or trenches, backfill excavations, or compact and level earth, • Use picks, shovels, and rakes to level earth or asphalt to grade specifications, • Position or dismantle forms for pouring concrete, using saws, hammers, nails or bolts, • Tends pumps, compressors, or generators, • Signal operators of construction equipment to facilitate alignment and movement of materials, • Assist craft workers, such as carpenters, ironworkers, plasterers and masons, • Measure, mark, or record openings or distances as part of site preparation, • May be called upon to operate a variety of power and hand tools: air hammers, earth tampers, cement mixers, mechanical hoists, surveying, measuring and other equipment, • Maintain clean work area by disposing of trash and debris properly., • Perform daily maintenance and safety checks of equipment., • Promote and adhere to the company’s safety program., • Pipe layer experience., • Underground utility, • Heavy equipment operator, • Construction laborer, • Erect or dismantle scaffolding, shoring, braces, traffic barricades, ramps, or other temporary structures. Knowledge, Skills and Abilities: • Ability to operate a variety of tools and equipment such as hand tools, power tools and motorized equipment., • Ability to listen, follow directions, and have a willingness to continue to enhance skills, • Able to communicate effectively with jobsite supervisor and co-workers, • General knowledge of road construction processes., • Demonstrate a safety first attitude. Strict adherence to safety requirements and procedures., • Display a professional and courteous attitude to co-workers, supervisors, and the general public, • Ability to work nights and weekends when necessary, • Must have reliable transportation, and ability to travel to assigned worksites Physical Demands: • Constant physical effort, including extended standing for at least 8 hour shift, • Intermittent sitting; continuous walking on construction site., • Climb intermittently, • Regularly twist, bend, stoop, kneel and crouch to perform duties, • Regularly reach above shoulder level, • Regularly push/pull objects, • Must be physically able to repetitively lift and carry at least 75 pounds on a regular basis, and sometimes heavier weight., • Agility, balance, and manual dexterity, as well as arm-hand steadiness, • Able to hear and respond to oral instructions in a noisy environment., • Regularly required to use hands and fingers to handle, feel or operate objects, tools or controls, and reach and grasp with hands and arms., • Excellent hand, eye and foot coordination., • Good vision, depth perception and the ability to adjust focus Education / Experience: • High School diploma or general education degree (GED), • One (1) year experience working as general laborer, or equivalent experience., • Active Driver’s licenseWork Environment: Regularly works in outside weather conditions, including extreme heat and humidity. Frequently works near moving mechanical parts, and is frequently exposed to wet or humid conditions and vibration. Handles various toxic products such as epoxies, grouts, sealers, paints and cleaners, with exposure to fumes or airborne particles, toxic or caustic chemicals, and risks of electrical shock. The noise level in the work environment is usually moderate to loud. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Approved By [Name and Title] [Date] Acknowledged By _ [Name of Employee] [Date] Jr. Davis Construction Company, Inc. is an Affirmative Action/Equal Opportunity Employer and is actively recruiting women and minorities for all open positions. Powered by JazzHR fxX7uMplJo

Job Description Bridge Carpenters Kissimmee FL or surrounding area Jr. Davis Construction Company Inc. builds roads, bridges and highways that connect our communities! We are seeking passionate individuals eager to apply their skills to take their career to the next level. These individuals will be responsible for to build and construct bridges. You will be expected to assist in the general operation of each job site. JDC is one of the largest heavy highway and civil construction firms in the state with over 900 employees, while still retaining a family business atmosphere. We’ll respect your hard work and treat you like family. Responsibilities: • Driving Pile, • Building wood and metal forms., • Erection and demolition of all forms., • Setting and tying steel., • Pouring and finishing concrete., • Set up and maintenance of erosion control., • Loading and unloading of materials., • Shoveling dirt, gravel, and asphalt., • General clean up around job site., • Checking and maintaining grade stakes., • Perform other related duties as assigned. Requirements: • 3+ recent years’ experience working as a Bridge Carpenter., • Valid Driver license and reliable transportation., • Must have a safety first attitude. Strict adherence to safety requirements and procedures is required, • Display a professional and courteous attitude to co-workers, supervisors, and the general public at all times., • Must be willing to travel and work away from home when required., • Must be willing to work nights and weekends when necessary. Knowledge & Skills: • High School diploma or equivalent preferred Physical Requirements: • All work is performed outside in heat, cold, and inclement weather., • Exposure to loud noises, fumes, odors, gasses, dusts, etc., • Work in close proximity to heavy traffic., • Ability to lift heavy objects, walk and stand for long periods of time and perform strenuous physical labor under adverse field conditions, • Must be able to lift, push, pull or carry objects, use abdominal and lower back muscles to provide support over time without fatigue, • Requires good manual dexterity (hand, hand with arm, two hands) and multi-limb coordination, • Frequently lifts and/or moves objects weighing up to 50 pounds, and occasionally objects weighing more than 50 pounds, • Duties may require working from heights such as bridge beams or bridge caps. Join the Team! At JDC, we believe that our employees are the reason for our success. JDC provides rewarding and challenging careers, encourages professional growth and strives to help each employee achieve their full potential. Company Benefits: We don’t just want to tell employees we care about them; we show it. That’s why we offer a comprehensive and competitive package to our employees: • Competitive pay rates, • Medical, dental and vision insurance, • Voluntary life, • Supplemental insurances, • 401k, • Paid time off, • Paid holidays, • On-the-job training and skill development, • Complementary Wellness Clinic services This is a great opportunity for the right candidate! At JDC, we promote a drug-free workplace environment and we pride ourselves on being an Affirmative Action/Equal Opportunity Employer. Women and minorities are encouraged to apply. Jr. Davis Construction Company, Inc. is an Affirmative Action/Equal Opportunity Employer and is actively recruiting women and minorities for all open positions. Powered by JazzHR 5s5E4mHP7P

Job DescriptionThe Land Development Project Manager, Civil Engineer will manage the full scope of work from preparation of proposal through construction based in AVCON's Orlando, Florida office. Duties include overseeing all technical aspects of site-development projects, reviewing all documents for quality control and quality assurance, and coordinating engineers and sub-consultants. This position is based in AVCON's Orlando, Florida office.ESSENTIAL FUNCTIONS (may include but are not limited to):Project Management:Responsible for design and management of site-development engineering projects including ensuring completeness and accuracy of design effort.Responsible for the various design elements to complete a project, system, component, or system with other team members with clear and specified objectives involving conventional types of plans, surveys, investigations, structures, and/or equipment.Prepares complete project documentation to include plans, specifications, and engineer estimates including the collection, assembling, and organizing of project data.Evaluates, selects, and adapts standard techniques, procedures, and criteria to project assignments; formulates and solves problems.Works on multiple projects of moderate to large size using time efficiently to stay within budget and timely delivery.Develops proposals including bid documents, project reports, studies, and other documentation.Attends project meetings and presents specific aspects of engineering assignments/projects.Coordinates technical and administrative activities with other internal departments and disciplines participating in the project.Ensures project engineering activities comply with firm and contract requirements and support overall project schedule, scope and budget.Interprets contract specifications and resolves conflicts with contractor on such matters as interpretation of specifications, workmanship, quality of materials, and related matters.Maintains list of project milestones and issues in-progress.Prepares monthly project status reports and change orders.Participates in client/contractor meetings, and resolves client, engineering and management project issues.Prepares project scopes, tasks, budgets, and schedules.Business Development:Assists in marketing and business development pursuits.Attends industry forums.Identifies potential clients.Interacts and collaborates with clients, officials, contractors, and other project team members.Prepares scope and fee proposals for review.ESSENTIAL QUALIFICATIONSBachelor's or Master's degree in Civil Engineering or related Engineering field.7+ years' experience.Proficiency with AutoCAD and AutoCAD Civil 3D.Proficiency with StormWise.Proficiency with KYPipe or similar software.Proficiency with MS Outlook, MS Excel, and MS Word. REQUIRED KNOWLEDGE, ABILITY, AND SKILLSAbility to work cooperatively and collaboratively with all levels of employees, management, and clients.Ability to organize work, set priorities, meet critical deadlines, and follow-up on assignments with minimal supervision.Ability to maintain confidentially and protect privileged client information and documents appropriately.Knowledge of correct English usage including spelling, grammar, punctuation, and vocabulary.LICENSUREValid drivers' license and maintenance of satisfactory driving record.Florida Professional Engineer licensure with ability to obtain licensure in other states.SUPERVISORY RESPONSIBILITIESThere are supervisory responsibilities associated with this position.ENVIRONMENTWork usually takes place in a clean, pleasant, and comfortable office setting. Site visits may occasionally take place in an outdoor environment. Nights and weekends are generally not required but may occasionally be necessary with little or no advanced notice.PHYSICAL REQUIREMENTSWhile performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit for long periods of time. The employee is occasionally required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to ten (10) pounds and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.TOOL/PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTSAs dictated by client site protocol, candidate will be required to utilize proper personal protective equipment including but not limited to gloves, sleeves, leather protectors, hard hats, safety vests, safety glasses and shields, hearing protection, safety shoes, covers, helmets/hoods, and any additional tools required for the task at hand.DISCLAIMERThis job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required for this job. Management reserves the right to make adjustments and/or assign or reassign any portion of this job description at any time with or without notice.EQUAL EMPLOYMENT OPPORTUNITY EMPLOYERAVCON, INC. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, AVCON complies with applicable state and local laws governing nondiscrimination in employment at every location in which the company has facilities. This policy applies to all terms and conditions of employment including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.AVCON expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of AVCON's employees to perform their job duties may result in discipline up to and including discharge.Please CLICK HERE and scroll down to our Benefits section to learn more about the potential Benefits you may be eligible to receive with this position.Founded in 1988, AVCON, INC. (AVCON) serves the aviation, facilities, transportation, and development industries and employs over 130 professionals with expertise in all aspects of aviation planning and design; civil, structural, electrical, mechanical, and plumbing engineering; fire protection design; utilities coordination and design; traffic planning and highway design; and a full array of design and construction support services. AVCON has built its reputation on delivering innovative and practical engineering solutions to clients, blending economic, sustainable, and technological elements into each project. Whether working on a building facility, roadway, or airfield, AVCON offers high-level technical expertise based on more than three decades of hands-on experience-ensuring the job is done right the first time. AVCON prides itself on partnering with clients in Transforming Today's Ideas into Tomorrow's Reality.NOTICE TO THIRD PARTY AGENCIES: Please note that AVCON does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, AVCON will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, AVCON explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of AVCON. Job Posted by ApplicantPro

Job Description The Mechanical, Plumbing and Fire Protection Engineering Team Leader provides managerial and technical supervision to the Facilities team using expertise and experience with complex technical activities, provides guidance on unconventional or complex programs, direction on design techniques, and new approaches to assignments with conflicting criteria. This position is based in AVCON's Orlando, Florida office. ESSENTIAL FUNCTIONS (may include but are not limited to): • Manages the workload of the Mechanical, Plumbing, and Fire Protection Design team., • Plans, coordinates, and manages detailed aspects of mechanical, plumbing, and fire protection engineering work related to a variety of large and small HVAC, plumbing, and fire protection systems for Commercial, Institutional, and Public Facilities., • Preparation of project proposals, tasks, budgets, and schedules., • Oversees site investigation projects and construction phased services and provides suggestions for engineering projects to ensure that standards and scope requirements are met., • Ensures the accuracy and code compliance of contract documents and reports., • Attends project meetings and presents specific aspects of engineering assignments/projects., • Communicates directly with clients-owners, designers, and contractors concerning project cost, staffing, and scheduling., • Assist in the preparation of the project status reports, contract documents, and engineer's estimates including the collection, assembling, and organizing of project data., • Seeks out new clients and projects to pursue and assists with the marketing efforts of these projects., • Recommends staffing needs to upper management; assists in the hiring process of the Mechanical department by assisting in the preparation of job descriptions, reviewing resumes, conducting interviews, and recommending candidates for hire., • Nights and weekends are generally not required but may occasionally be necessary with little or no advanced notice. ESSENTIAL QUALIFICATIONS • Bachelor or Master's degree in Mechanical Engineering., • 10+ years of formal training and experience with at least five (5) years as a Technical Team Leader., • Must have experience as a group leader or project engineer on complex, multi-discipline engineering design or projects., • Advanced knowledge of HVAC, plumbing, and fire protection engineering and design and be familiar with applicable Codes, standards, and acceptable industry practices., • Must have proven track record of accomplishments as lead design engineer on mechanical projects and be capable of supervising and directing a team of engineers, designers, and support personnel., • Construction Administration experience., • Proficient with AutoCAD., • Proficient with REVIT., • Proficiency with MS Outlook, MS Excel, and MS Word., • Knowledge of MS PowerPoint, MS Project, and MS SharePoint a plus. REQUIRED KNOWLEDGE, ABILITY, AND SKILLS • Ability to work cooperatively and collaboratively with all levels of employees, management, and clients., • Ability to organize teams, workplans, set priorities, meet critical deadlines, and follow-up on assignments with minimal supervision., • Ability to maintain confidentiality and protect privileged client information and documents appropriately., • Ability to work calmly and effectively in a high-volume office environment under pressure of multiple deadlines. LICENSURE • Valid drivers' license and maintenance of satisfactory driving record., • Licensed in the State of Florida as a Professional Engineer, or ability to obtain reciprocity within six (6) months., • Ability to become licensed in multiple states. SUPERVISORY RESPONSIBILITIES There are supervisory responsibilities associated with this position. ENVIRONMENT Work usually takes place in a clean, pleasant, and comfortable office setting. Site visits may occasionally take place in an outdoor environment. PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit for long periods of time. The employee is occasionally required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to ten (10) pounds and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. TOOL/PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS As dictated by client site protocol, candidate will be required to utilize proper personal protective equipment including but not limited to gloves, sleeves, leather protectors, hard hats, safety vests, safety glasses and shields, hearing protection, safety shoes, covers, helmets/hoods, and any additional tools required for the task at hand. DISCLAIMER This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required for this job. Management reserves the right to make adjustments and/or assign or reassign any portion of this job description at any time with or without notice. EQUAL EMPLOYMENT OPPORTUNITY EMPLOYER AVCON, INC. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, AVCON complies with applicable state and local laws governing nondiscrimination in employment at every location in which the company has facilities. This policy applies to all terms and conditions of employment including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. AVCON expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of AVCON's employees to perform their job duties may result in discipline up to and including discharge. Please CLICK HERE and scroll down to our Benefits section to learn more about the potential Benefits you may be eligible to receive with this position. Founded in 1988, AVCON, INC. (AVCON) serves the aviation, facilities, transportation, and development industries and employs over 130 professionals with expertise in all aspects of aviation planning and design; civil, structural, electrical, mechanical, and plumbing engineering; fire protection design; utilities coordination and design; traffic planning and highway design; and a full array of design and construction support services. AVCON has built its reputation on delivering innovative and practical engineering solutions to clients, blending economic, sustainable, and technological elements into each project. Whether working on a building facility, roadway, or airfield, AVCON offers high-level technical expertise based on more than three decades of hands-on experience-ensuring the job is done right the first time. AVCON prides itself on partnering with clients in Transforming Today's Ideas into Tomorrow's Reality. NOTICE TO THIRD PARTY AGENCIES: Please note that AVCON does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, AVCON will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, AVCON explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of AVCON. Job Posted by ApplicantPro

Job DescriptionThis is a mentorship position designed to serve both an immediate objective of providing support to engineering staff and a long-term objective of internally developing exceptional engineering talent. The intern will be based in AVCON's Orlando, Florida office.ESSENTIAL FUNCTIONS (may include but are not limited to)Assist with basic drafting.Working with and supporting engineers or higher-level technicians in the development and maintenance of project documentation from design to construction.Performing a variety of routine tasks designed to provide hands-on experience with engineering methods and practices to include engineering calculations, quantities take-offs, cost estimating, CAD, and project specification review and development.ESSENTIAL QUALIFICATIONSCurrent Bachelor's or Master's level student majoring in Civil Engineering or related Engineering field.Familiarity with MS Outlook, MS Word, and MS Excel.Ideal candidate is an engineering student in their third or higher year with an advanced academic record.PREFERRED QUALIFICATIONSExposure and working knowledge of AutoCAD, preferred.Relevant experience that showcases leadership, initiative, accomplishment, and/or teamwork.REQUIRED KNOWLEDGE, ABILITY, AND SKILLSAbility to work cooperatively and collaboratively with all levels of employees and management.Ability to maintain confidentiality and protect privileged client information and documents appropriately.Knowledge of correct English usage including spelling, grammar, punctuation, and vocabulary.Self-motivated, conscientious, and willing to learn.Effective listening skills.LICENSUREValid drivers' license and maintenance of satisfactory driving record.Engineer in Training (EIT), preferred for Bachelor's final year and Master's level students.SUPERVISORY RESPONSIBILITIESThere are no supervisory responsibilities associated with this position.TELECOMMUTINGDue to the collaborative nature of this position, it is important that this position physically work in the office.ENVIRONMENTWork usually takes place in a clean, pleasant, and comfortable office setting. Site visits may occasionally take place in an outdoor environment. Nights and weekends are generally not required but may occasionally be necessary with little or no advanced notice.PHYSICAL REQUIREMENTSWhile performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit for long periods of time. The employee is occasionally required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to ten (10) pounds and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.TOOL/PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTSAs dictated by client site protocol, candidate will be required to utilize proper personal protective equipment including but not limited to gloves, sleeves, leather protectors, hard hats, safety vests, safety glasses and shields, hearing protection, safety shoes, covers, helmets/hoods, and any additional tools required for the task at hand.DISCLAIMERThis job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required for this job. Management reserves the right to make adjustments and/or assign or reassign any portion of this job description at any time with or without notice. EQUAL EMPLOYMENT OPPORTUNITY EMPLOYERAVCON, INC. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, AVCON complies with applicable state and local laws governing nondiscrimination in employment at every location in which the company has facilities. This policy applies to all terms and conditions of employment including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.AVCON expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of AVCON's employees to perform their job duties may result in discipline up to and including discharge.Please CLICK HERE and scroll down to our Benefits section to learn more about the potential Benefits you may be eligible to receive with this position.Founded in 1988, AVCON, INC. (AVCON) serves the aviation, facilities, transportation, and development industries and employs over 130 professionals with expertise in all aspects of aviation planning and design; civil, structural, electrical, mechanical, and plumbing engineering; fire protection design; utilities coordination and design; traffic planning and highway design; and a full array of design and construction support services. AVCON has built its reputation on delivering innovative and practical engineering solutions to clients, blending economic, sustainable, and technological elements into each project. Whether working on a building facility, roadway, or airfield, AVCON offers high-level technical expertise based on more than three decades of hands-on experience ensuring the job is done right the first time. AVCON prides itself on partnering with clients in Transforming Today's Ideas into Tomorrow's Reality.NOTICE TO THIRD PARTY AGENCIES: Please note that AVCON does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, AVCON will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, AVCON explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of AVCON. Job Posted by ApplicantPro

Job DescriptionAs part of a design team, the primary responsibilities of the Engineer, Land Development are small and large infrastructure planning and design, assisting with Site Development Planning and conceptual sketches, stormwater design and permitting, pavement evaluations and designs, site and facilities design, commercial site development layouts, utility system design, and related services. Duties also include generating engineering reports, preparation of project specifications, assistance and guidance of entitlement process for zoning and future land use changes, monitoring the entitlement process as well as permit applications (City, County, and State), and providing engineering oversight during construction. This position is based in AVCON's Orlando, Florida office.ESSENTIAL FUNCTIONS (may include but are not limited to):Assists in the various design elements to complete a project, component, or system with other team members with clear and specific objectives involving conventional types of plans, surveys, investigations, structures, and/or equipment.Assists in the preparation of complete project documentation to include plans, specifications, and engineer estimates including the collection, assembling, and organizing of project data.Evaluates, selects, and adapts standard techniques, procedures, and criteria to project assignments; formulates and solves problems with guidance and direction.Plans and coordinates detailed aspects of engineering work; works on multiple projects of moderate size or portions of major projects using time efficiently to stay within budget and deliver on time.Assists in the preparation of project scopes, tasks, budgets, and schedules.Assists with proposals including bid documents, project reports, studies, and other documentation.Receives general direction on key objectives; receives guidance when necessary on unconventional or complex programs, direction on modified techniques, and new approaches on assignments with conflicting criteria.Interacts and collaborates with clients, contractors, and other project team members.Attends project meetings and presents specific aspects of engineering assignments/project. Nights and weekends are generally not required but may occasionally be necessary with little or no advanced notice. ESSENTIAL QUALIFICATIONSBachelor's or Master's degree in Civil Engineering or related Engineering field. 2-5 years' experience.Proficiency with AutoCAD.Proficiency with AutoCAD Civil 3D.Working knowledge of StormWise.Working knowledge of EPANET, WaterCAD, StormCAD or similar software.Proficiency with MS Outlook, MS Excel, and MS Word.REQUIRED KNOWLEDGE, ABILITY, AND SKILLSAbility to work cooperatively and collaboratively with all levels of employees, management, and clients.Ability to organize work, set priorities, meet critical deadlines, and follow-up on assignments with minimal supervision.Ability to maintain confidentiality and protect privileged client information and documents appropriately.Ability to work calmly and effectively in a high-volume office environment under pressure of heavy deadlines.Knowledge of correct English usage including spelling, grammar, punctuation, and vocabulary.LICENSUREValid drivers' license and maintenance of satisfactory driving record. Florida Professional Engineer licensure or Engineer in Training (EIT) with ability to obtain licensure within 36 months of hire. SUPERVISORY RESPONSIBILITIESThere are no supervisory responsibilities associated with this position.ENVIRONMENTWork usually takes place in a clean, pleasant, and comfortable office setting. Site visits may occasionally take place in an outdoor environment.PHYSICAL REQUIREMENTSWhile performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit for long periods of time. The employee is occasionally required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to ten (10) pounds and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.TOOL/PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTSAs dictated by client site protocol, candidate will be required to utilize proper personal protective equipment including but not limited to gloves, sleeves, leather protectors, hard hats, safety vests, safety glasses and shields, hearing protection, safety shoes, covers, helmets/hoods, and any additional tools required for the task at hand.DISCLAIMERThis job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required for this job. Management reserves the right to make adjustments and/or assign or reassign any portion of this job description at any time with or without notice.EQUAL EMPLOYMENT OPPORTUNITY EMPLOYERAVCON, INC. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, AVCON complies with applicable state and local laws governing nondiscrimination in employment at every location in which the company has facilities. This policy applies to all terms and conditions of employment including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.AVCON expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of AVCON's employees to perform their job duties may result in discipline up to and including discharge.Please CLICK HERE and scroll down to our Benefits section to learn more about the potential Benefits you may be eligible to receive with this position.Founded in 1988, AVCON, INC. (AVCON) serves the aviation, facilities, transportation, and development industries and employs over 130 professionals with expertise in all aspects of aviation planning and design; civil, structural, electrical, mechanical, and plumbing engineering; fire protection design; utilities coordination and design; traffic planning and highway design; and a full array of design and construction support services. AVCON has built its reputation on delivering innovative and practical engineering solutions to clients, blending economic, sustainable, and technological elements into each project. Whether working on a building facility, roadway, or airfield, AVCON offers high-level technical expertise based on more than three decades of hands-on experience ensuring the job is done right the first time. AVCON prides itself on partnering with clients in Transforming Today's Ideas into Tomorrow's Reality.NOTICE TO THIRD PARTY AGENCIES: Please note that AVCON does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, AVCON will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, AVCON explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of AVCON. Job Posted by ApplicantPro

Job DescriptionAs part of a design team, the primary duty of the Senior Mechanical Engineer is to perform engineering duties in planning and designing HVAC systems to be used in construction of various structures, systems, or equipment. The candidate shall have experience with supervising and leading a group of employees. This position is based in AVCON's Orlando, Florida officeESSENTIAL FUNCTIONS (may include but are not limited to):Independently evaluate, select and apply standard engineering techniques, procedures, and criteria on moderately complexReview plans and prepare or review technical specifications, contract documents, andAssist in the resolution of design problems that may include field investigation or inspections, detailed design work, and detailed checking of design computations done byBuild a strong network of new and existing clients and manage client relationships and client satisfaction.Participate in developing and expanding the team through strategic planning and the development and implementation of the firm's overall business and marketing strategies.Draft cost estimates, periodic reports covering construction activities, pay estimates, and data necessary to document acceptability of materials and quantities for finalMake design recommendations, adaptations, and modifications based on actual fieldAssist in the development of technical information to support marketingEvaluate contractor's job performance and compliance with constructionLead QA/QC efforts for department.Mentor and supervise production efforts of junior staff. Provide feedback to Team Manager regarding status of department workload. Nights and weekends are generally not required but may occasionally be necessary with little or no advanced notice. ESSENTIAL QUALIFICATIONSBachelor's degree in Mechanical Engineering.10+ years of experience.Proficiency with AutoCAD, required.Proficiency with REVIT, desirable.Experience in engineering and design of HVAC systems.Experience with plumbing and fire protection systems.Experience in providing technical specifications for design projects. Construction administration experience. Project experience that includes Direct Expansion (DX) equipment and chilled water systems.Strong knowledge of HVAC load calculations, ductwork design, piping design, and equipment selections.Experience in equipment selection including air handling units, fans, VAV terminals, package units, pumps, chillers, and heating.Proficiency with MS Outlook, MS Excel, and MS Word.REQUIRED KNOWLEDGE, ABILITY, AND SKILLSProven ability to resolve complex designExcellent communication skills with a team-orientatedAbility to work cooperatively and collaboratively with all levels of employees, management, andAbility to organize work, set priorities, meet critical deadlines, and follow-up on assignments with minimalAbility to maintain confidentiality and protect privileged client information and documents appropriately.Knowledge of correct English usage including spelling, grammar, punctuation, and vocabulary.LICENSUREValid drivers' license and maintenance of satisfactory driving record.Professional Engineer licensure with ability to obtain Florida licensure within six (6) months, required.Ability to become licensed in multiple states, preferred.SUPERVISORY RESPONSIBILITIESSupervisory skills are preferred.ENVIRONMENTWork usually takes place in a clean, pleasant, and comfortable office setting. Site visits may occasionally take place in an outdoor environment. Site visits may occur in an area where extra caution, attention and adherence to additional guidelines may be required. PHYSICAL REQUIREMENTSWhile performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit for long periods of time. The employee is occasionally required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to ten (10) pounds and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.TOOL/PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTSAs dictated by client site protocol, candidate will be required to utilize proper personal protective equipment including but not limited to gloves, sleeves, leather protectors, hard hats, safety vests, safety glasses and shields, hearing protection, safety shoes, covers, helmets/hoods, and any additional tools required for the task at hand.DISCLAIMERThis job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required for this job. Management reserves the right to make adjustments and/or assign or reassign any portion of this job description at any time with or without notice.EQUAL EMPLOYMENT OPPORTUNITY EMPLOYERAVCON, INC. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, AVCON complies with applicable state and local laws governing nondiscrimination in employment at every location in which the company has facilities. This policy applies to all terms and conditions of employment including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.AVCON expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of AVCON's employees to perform their job duties may result in discipline up to and including discharge.Please CLICK HERE and scroll down to our Benefits section to learn more about the potential Benefits you may be eligible to receive with this position.Founded in 1988, AVCON, INC. (AVCON) serves the aviation, facilities, transportation, and development industries and employs over 130 professionals with expertise in all aspects of aviation planning and design; civil, structural, electrical, mechanical, and plumbing engineering; fire protection design; utilities coordination and design; traffic planning and highway design; and a full array of design and construction support services. AVCON has built its reputation on delivering innovative and practical engineering solutions to clients, blending economic, sustainable, and technological elements into each project. Whether working on a building facility, roadway, or airfield, AVCON offers high-level technical expertise based on more than three decades of hands-on experience-ensuring the job is done right the first time. AVCON prides itself on partnering with clients in Transforming Today's Ideas into Tomorrow's Reality.NOTICE TO THIRD PARTY AGENCIES: Please note that AVCON does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, AVCON will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, AVCON explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of AVCON. Job Posted by ApplicantPro

Job DescriptionAs part of a design team, the primary responsibilities of the Engineer, Land Development are small and large infrastructure planning and design, assisting with Site Development Planning and conceptual sketches, stormwater design and permitting, pavement evaluations and designs, site and facilities design, commercial site development layouts, utility system design, and related services. Duties also include generating engineering reports, preparation of project specifications, assistance and guidance of entitlement process for zoning and future land use changes, and monitoring the entitlement process as well as permit applications (City, County, and State), and providing engineering oversight during construction. This position is based in AVCON's Orlando, Florida office.ESSENTIAL FUNCTIONS (may include but are not limited to):Assists in the various design elements to complete a project, component, or system with other team members with clear and specific objectives involving conventional types of plans, surveys, investigations, structures, and/or equipment.Assists in the preparation of complete project documentation to include plans, specifications, and engineer estimates including the collection, assembling, and organizing of project data.Evaluates, selects, and adapts standard techniques, procedures, and criteria to project assignments; formulates and solves problems with guidance and direction.Plans and coordinates detailed aspects of engineering work; works on multiple projects of moderate size or portions of major projects using time efficiently to stay within budget and deliver on time.Assists in the preparation of project scopes, tasks, budgets, and schedules.Assists with proposals including bid documents, project reports, studies, and other documentation.Receives general direction on key objectives; receives guidance when necessary on unconventional or complex programs, direction on modified techniques, and new approaches on assignments with conflicting criteria.Interacts and collaborates with clients, contractors, and other project team members.Attends project meetings and presents specific aspects of engineering assignments/project.Nights and weekends are generally not required but may occasionally be necessary with little or no advanced notice. ESSENTIAL QUALIFICATIONSBachelor's or Master's degree in Civil Engineering or related Engineering field. 5-8 years' experience.Proficiency with AutoCAD.Proficiency with AutoCAD Civil 3D.Proficiency with StormWise.Proficiency with Working knowledge with EPANET, WaterCAD, StormCAD or similar software.Proficiency with MS Outlook, MS Excel, and MS Word.REQUIRED KNOWLEDGE, ABILITY, AND SKILLSAbility to work cooperatively and collaboratively with all levels of employees, management, and clients.Ability to organize work, set priorities, meet critical deadlines, and follow-up on assignments with minimal supervision.Ability to maintain confidentially and protect privileged client information and documents appropriately.Ability to work calmly and effectively in a high-volume office environment under pressure of heavy deadlines.Knowledge of correct English usage including spelling, grammar, punctuation, and vocabulary.LICENSUREValid drivers' license and maintenance of satisfactory driving record.Florida Professional Engineer licensure.SUPERVISORY RESPONSIBILITIESThere are no supervisory responsibilities associated with this position.ENVIRONMENTWork usually takes place in a clean, pleasant, and comfortable office setting. Site visits may occasionally take place in an outdoor environment.PHYSICAL REQUIREMENTSWhile performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit for long periods of time. The employee is occasionally required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to ten (10) pounds and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.TOOL/PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTSAs dictated by client site protocol, candidate will be required to utilize proper personal protective equipment including but not limited to gloves, sleeves, leather protectors, hard hats, safety vests, safety glasses and shields, hearing protection, safety shoes, covers, helmets/hoods, and any additional tools required for the task at hand.DISCLAIMERThis job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required for this job. Management reserves the right to make adjustments and/or assign or reassign any portion of this job description at any time with or without notice. EQUAL EMPLOYMENT OPPORTUNITY EMPLOYERAVCON, INC. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, AVCON complies with applicable state and local laws governing nondiscrimination in employment at every location in which the company has facilities. This policy applies to all terms and conditions of employment including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.AVCON expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of AVCON's employees to perform their job duties may result in discipline up to and including discharge.Please CLICK HERE and scroll down to our Benefits section to learn more about the potential Benefits you may be eligible to receive with this position.Founded in 1988, AVCON, INC. (AVCON) serves the aviation, facilities, transportation, and development industries and employs over 130 professionals with expertise in all aspects of aviation planning and design; civil, structural, electrical, mechanical, and plumbing engineering; fire protection design; utilities coordination and design; traffic planning and highway design; and a full array of design and construction support services. AVCON has built its reputation on delivering innovative and practical engineering solutions to clients, blending economic, sustainable, and technological elements into each project. Whether working on a building facility, roadway, or airfield, AVCON offers high-level technical expertise based on more than three decades of hands-on experience ensuring the job is done right the first time. AVCON prides itself on partnering with clients in Transforming Today's Ideas into Tomorrow's Reality.NOTICE TO THIRD PARTY AGENCIES: Please note that AVCON does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, AVCON will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, AVCON explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of AVCON. Job Posted by ApplicantPro

Job DescriptionAs part of a design team, the primary responsibilities of the Engineer, Transportation/Roadway are to assist with the planning and design of a variety of large and small highway and multi-use trail engineering projects including geometric design of all classifications of roadways and right-of-way plans; storm drainage design; utilities; signing and marking; and erosion control design; assembly of City, County, and State permits; and provide engineering oversight during construction. This position is based in AVCON's Orlando, Florida office.ESSENTIAL FUNCTIONS (may include but are not limited to):Assists in the various design elements to complete a project, component, or system with other team members with clear and specific objectives involving conventional types of plans, surveys, investigations, structures, and/or equipment.Assists in the preparation of complete project documentation to include plans, specifications, and engineer estimates including the collection, assembling, and organizing of project data.Evaluates, selects, and adapts standard techniques, procedures, and criteria to project assignments; formulates and solves problems with guidance and direction.Plans and coordinates detailed aspects of engineering work; works on multiple projects of moderate size or portions of major projects using time efficiently to stay within budget and deliver on time.Assists in the preparation of project scopes, tasks, budgets, and schedules.Assists with proposals including bid documents, project reports, studies, and other documentation.Receives general direction on key objectives; receives guidance when necessary on unconventional or complex programs, direction on modified techniques, and new approaches on assignments with conflicting criteria.Interacts and collaborates with clients, contractors, and other project team members.Attends project meetings and presents specific aspects of engineering assignments/project.Nights and weekends are generally not required but may occasionally be necessary with little or no advanced notice. ESSENTIAL QUALIFICATIONSBachelor's degree in Civil Engineering.5-8 years' experience.Proficiency with AutoCAD, AutoCAD Civil 3D or Bentley OpenRoads.Proficiency with MS Outlook, MS Excel, and MS Word.REQUIRED KNOWLEDGE, ABILITY, AND SKILLSWorking knowledge of Florida Department of Transportation design requirements for roadway development and Federal/State funding.Ability to work cooperatively and collaboratively with all levels of employees, management, and clients.Ability to organize work, set priorities, meet critical deadlines, and follow-up on assignments with minimal supervision.Ability to maintain confidentially and protect privileged client information and documents appropriately.Ability to work calmly and effectively in a high-volume office environment under pressure of heavy deadlines.Knowledge of correct English usage including spelling, grammar, punctuation, and vocabulary.LICENSUREValid drivers' license and maintenance of satisfactory driving record.Florida Professional Engineer licensure or ability to obtain Florida licensure within six (6) months of hire.SUPERVISORY RESPONSIBILITIESThere are no supervisory responsibilities associated with this position.ENVIRONMENTWork usually takes place in a clean, pleasant, and comfortable office setting. Site visits may occasionally take place in an outdoor environment.PHYSICAL REQUIREMENTSWhile performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit for long periods of time. The employee is occasionally required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to ten (10) pounds and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.TOOL/PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTSAs dictated by client site protocol, candidate will be required to utilize proper personal protective equipment including but not limited to gloves, sleeves, leather protectors, hard hats, safety vests, safety glasses and shields, hearing protection, safety shoes, covers, helmets/hoods, and any additional tools required for the task at hand.DISCLAIMERThis job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required for this job. Management reserves the right to make adjustments and/or assign or reassign any portion of this job description at any time with or without notice.EQUAL EMPLOYMENT OPPORTUNITY EMPLOYERAVCON, INC. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, AVCON complies with applicable state and local laws governing nondiscrimination in employment at every location in which the company has facilities. This policy applies to all terms and conditions of employment including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.AVCON expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of AVCON's employees to perform their job duties may result in discipline up to and including discharge.Please CLICK HERE and scroll down to our Benefits section to learn more about the potential Benefits you may be eligible to receive with this position.Founded in 1988, AVCON, INC. (AVCON) serves the aviation, facilities, transportation, and development industries and employs over 130 professionals with expertise in all aspects of aviation planning and design; civil, structural, electrical, mechanical, and plumbing engineering; fire protection design; utilities coordination and design; traffic planning and highway design; and a full array of design and construction support services. AVCON has built its reputation on delivering innovative and practical engineering solutions to clients, blending economic, sustainable, and technological elements into each project. Whether working on a building facility, roadway, or airfield, AVCON offers high-level technical expertise based on more than three decades of hands-on experience ensuring the job is done right the first time. AVCON prides itself on partnering with clients in Transforming Today's Ideas into Tomorrow's Reality.NOTICE TO THIRD PARTY AGENCIES: Please note that AVCON does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, AVCON will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, AVCON explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of AVCON. Job Posted by ApplicantPro

Job Description Hydraulic Crane Operator Kissimmee, FL or surrounding area Jr. Davis Construction Company Inc. builds roads, bridges and highways that connect our communities! We are seeking passionate individuals eager to apply their skills to take their career to the next level. This individual will be responsible for operating cranes and other moving equipment for lifting, moving, or placing loads. JDC is one of the largest heavy highway and civil construction firms in the state with over 900 employees, while still retaining a family business atmosphere. We’ll respect your hard work and treat you like family. Responsibilities: • Determine load weights and check them against lifting capacities, • Move levers, depress foot pedals, or turn dials to operate cranes, cherry pickers, electromagnets, or other moving equipment for lifting, moving, or placing loads., • Inspect and adjust crane mechanisms or lifting accessories to prevent malfunctions or damage., • Inspect cables or grappling devises for wear and install or replace cables, as needed., • Other duties as assigned. Requirements: • Must hold a valid/current crane operator certification, • 3 recent years’ experience working as a “Hydraulic Crane Operator”, • Active CDL Class “A” license, • Active Driver license., • Must have a safety first attitude. Strict adherence to safety requirements and procedures is required, • Display a professional and courteous attitude to co-workers, supervisors, and the general public at all times., • Must be willing to travel and work away from home when required., • Must be willing to work nights and weekends when necessary. Knowledge & Skills: • A high school diploma or general education degree (GED) is preferred., • Must be able to read and interpret load weights and check them against lifting capacities to prevent overload., • Ability to listen, follow directions, and have a willingness to continue to enhance skills. Join the Team! At JDC, we believe that our employees are the reason for our success. JDC provides rewarding and challenging careers, encourages professional growth and strives to help each employee achieve their full potential. Company Benefits: We don’t just want to tell employees we care about them; we show it. That’s why we offer a comprehensive and competitive package to our employees: • Competitive pay rates, • Medical, dental and vision insurance, • Voluntary life, • Supplemental insurances, • 401k, • Paid time off, • Paid holidays, • On-the-job training and skill development, • Complementary Wellness Clinic services This is a great opportunity for the right candidate! At JDC, we promote a drug-free workplace environment and we pride ourselves on being an Affirmative Action/Equal Opportunity Employer. Women and minorities are encouraged to apply. Jr. Davis Construction Company, Inc. is an Affirmative Action/Equal Opportunity Employer and is actively recruiting women and minorities for all open positions. Powered by JazzHR 8uJV0tpUXU

Job Description Practice Area: Transportation C&S Companies is seeking a Highway Designer to join our Orlando transportation team. This role supports the planning and design of roadway, intersection, and multimodal transportation improvements for public and private clients. The successful candidate will contribute to practical, responsive solutions that advance mobility, safety, constructability, and long-term community needs. Responsibilities • Prepare roadway design documents for transportation projects, including horizontal and vertical alignments, typical sections, roadway geometry, grading, drainage coordination, signing and pavement markings, and intersection improvements., • Develop design plans, calculations, quantities, cost estimates, technical specifications, and supporting documentation under the direction of project engineers and project managers., • Use three-dimensional modeling and design tools to support roadway design, coordination, visualization, and construction document production., • Assist with the development of roadway rehabilitation, widening, reconstruction, complete streets, access management, and safety improvement projects., • Coordinate design activities with in-house and external disciplines, including traffic engineering, drainage, utilities, environmental, survey, right-of-way, landscape architecture, and construction services., • Participate in field reviews, data collection, design meetings, stakeholder coordination, and quality-control reviews., • Apply applicable client, local, state, and federal design criteria and standards to project deliverables., • Support the identification and resolution of design issues related to utilities, environmental conditions, constructability, project phasing, mobility, safety, budgets, and schedules., • Contribute to clear, accurate, and complete construction documents that support successful bidding and construction., • Maintain organized project files and communicate progress, needs, and technical issues to the project team. Qualifications • Bachelor’s degree in civil engineering, civil engineering technology, or a related field., • Experience supporting roadway, highway, intersection, site-civil, or transportation design projects., • Proficiency with FDOT ORD and AutoCAD software. Experience with roadway modeling tools is preferred., • Familiarity with plan production, quantity development, engineering calculations, and construction document coordination., • Working knowledge of roadway design fundamentals, including alignment, grading, drainage coordination, traffic control elements, signing, pavement markings, and pedestrian accommodations., • Ability to interpret and apply agency design criteria, specifications, and standards., • Strong attention to detail, organizational skills, and ability to manage multiple assignments., • Clear written and verbal communication skills and a collaborative approach to project delivery., • Engineer Intern certification or progress toward professional engineering licensure is preferred. What You Will Work On C&S transportation teams support projects ranging from small intersection improvements to major highway reconstruction. Our highway design services address project goals, community input, property and environmental impacts, utility coordination, mobility and safety improvements, budgets, and schedules. Transportation professionals work across disciplines to support highway and bridge design, traffic engineering, transportation planning, and multimodal improvements. Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionAs part of a design team or independently, the primary responsibilities of the Transportation/Traffic Engineer will be to assist with the planning and design of traffic elements associated with transportation and development projects. Duties may include preparation of traffic studies, design of traffic signalization, signing & pavement marking, maintenance of traffic and ITS/Fiber design. This position is based in AVCON's Orlando, Florida office.ESSENTIAL FUNCTIONS (may include but are not limited to):Prepares traffic studies associated with land development projects, school projects or roadway improvement projects. Prepare project layouts and construction plans; assists in the various design elements to complete a project with other team members with clear and specified technical objectives.Assists in the preparation and maintenance of complete project documentation to include plans, specifications, and engineer estimates including the collection, assembling, and organizing of project data.Assists in evaluating, selecting, and adapting standard techniques, procedures, and criteria to project assignments; formulates and solves problems with guidance and direction.Plans and coordinates detailed aspects of engineering work; works on multiple projects of small to moderate size or portions of major projects using time efficiently to stay within budget and deliver on time.Preparation of project scopes, tasks, budgets, schedules, project specifications, and engineering reports.Prepares bid documents, project reports, studies, and other documentation.Receives direction on key objectives; receives guidance on unconventional or complex programs, direction on modified techniques, and new approaches on assignments with conflicting criteria.Assist with assembling permit submittals for City, County and State agencies.Performs basic and moderately complex engineering design calculations.Aids in construction administration services and learn to respond to construction needs on various projects.Assists with preparations for, and attends, pre-construction and construction coordination meetings, internal project meetings, planning meetings, and client meetings.Assists in site observation work and compile site visit reports.Drafts departmental reports and correspondence.Nights and weekends are generally not required but may occasionally be necessary with little or no advanced notice. ESSENTIAL QUALIFICATIONSBachelor's degree in Civil Engineering.2-5 years' experience.Proficiency with all kinds of traffic and safety analysis including traffic simulation, essential.Proficiency with SYNCHRO and other traffic engineering software, essential.Proficiency with MicroStation and Bentley GEOPAK Civil Engineering Suite V8i, desired. Proficiency with AutoCAD, desired.Proficiency with MS Outlook, MS Excel, and MS Word, essential.REQUIRED KNOWLEDGE, ABILITY, AND SKILLSAbility to work cooperatively and collaboratively with all levels of employees, management, and clients.Ability to organize work, set priorities, meet critical deadlines, and follow-up on assignments with minimal supervision.Ability to maintain confidentiality and protect privileged client information and documents appropriately.Ability to work calmly and effectively in a high-volume office environment under pressure of heavy deadlines.Knowledge of correct English usage including spelling, grammar, punctuation, and vocabulary.LICENSUREValid drivers' license and maintenance of satisfactory driving record.Florida Professional Engineer licensure or Engineer in Training (EIT) with ability to obtain licensure within 36 months of hire.SUPERVISORY RESPONSIBILITIESThere are no supervisory responsibilities associated with this position. Although the Engineer may direct other staff to assist in preparation of plans, studies and reports.ENVIRONMENTWork usually takes place in a clean, pleasant, and comfortable office setting. Site visits may occasionally take place in an outdoor environment.PHYSICAL REQUIREMENTSWhile performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit for long periods of time. The employee is occasionally required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to ten (10) pounds and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.TOOL/PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTSAs dictated by client site protocol, candidate will be required to utilize proper personal protective equipment including but not limited to gloves, sleeves, leather protectors, hard hats, safety vests, safety glasses and shields, hearing protection, safety shoes, covers, helmets/hoods, and any additional tools required for the task at hand.DISCLAIMERThis job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required for this job. Management reserves the right to make adjustments and/or assign or reassign any portion of this job description at any time with or without notice.EQUAL EMPLOYMENT OPPORTUNITY EMPLOYERAVCON, INC. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, AVCON complies with applicable state and local laws governing nondiscrimination in employment at every location in which the company has facilities. This policy applies to all terms and conditions of employment including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.AVCON expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of AVCON's employees to perform their job duties may result in discipline up to and including discharge.Please CLICK HERE and scroll down to our Benefits section to learn more about the potential Benefits you may be eligible to receive with this position.Founded in 1988, AVCON, INC. (AVCON) serves the aviation, facilities, transportation, and development industries and employs over 130 professionals with expertise in all aspects of aviation planning and design; civil, structural, electrical, mechanical, and plumbing engineering; fire protection design; utilities coordination and design; traffic planning and highway design; and a full array of design and construction support services. AVCON has built its reputation on delivering innovative and practical engineering solutions to clients, blending economic, sustainable, and technological elements into each project. Whether working on a building facility, roadway, or airfield, AVCON offers high-level technical expertise based on more than three decades of hands-on experience ensuring the job is done right the first time. AVCON prides itself on partnering with clients in Transforming Today's Ideas into Tomorrow's Reality.NOTICE TO THIRD PARTY AGENCIES: Please note that AVCON does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, AVCON will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, AVCON explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of AVCON. Job Posted by ApplicantPro

Job DescriptionAs part of a design team or independently, the primary responsibilities of the Transportation/Traffic Engineer will be to assist with the planning and design of traffic elements associated with transportation and development projects. Duties may include preparation of traffic studies, design of traffic signalization, signing & pavement marking, maintenance of traffic and ITS/Fiber design. This position is based in AVCON's Orlando, Florida office.ESSENTIAL FUNCTIONS (may include but are not limited to):Prepares traffic studies associated with land development projects, school projects or roadway improvement projects. Prepare project layouts and construction plans; assists in the various design elements to complete a project with other team members with clear and specified technical objectives.Assists in the preparation and maintenance of complete project documentation to include plans, specifications, and engineer estimates including the collection, assembling, and organizing of project data.Assists in evaluating, selecting, and adapting standard techniques, procedures, and criteria to project assignments; formulates and solves problems with guidance and direction.Plans and coordinates detailed aspects of engineering work; works on multiple projects of small to moderate size or portions of major projects using time efficiently to stay within budget and deliver on time.Preparation of project scopes, tasks, budgets, schedules, project specifications, and engineering reports.Prepares bid documents, project reports, studies, and other documentation.Receives direction on key objectives; receives guidance on unconventional or complex programs, direction on modified techniques, and new approaches on assignments with conflicting criteria.Assist with assembling permit submittals for City, County and State agencies.Performs basic and moderately complex engineering design calculations.Aids in construction administration services and learn to respond to construction needs on various projects.Assists with preparations for, and attends, pre-construction and construction coordination meetings, internal project meetings, planning meetings, and client meetings.Assists in site observation work and compile site visit reports.Drafts departmental reports and correspondence.Nights and weekends are generally not required but may occasionally be necessary with little or no advanced notice. ESSENTIAL QUALIFICATIONSBachelor's degree in Civil Engineering.5-8 years' experience.Proficiency with all kinds of traffic and safety analysis including traffic simulation, essential.Proficiency with SYNCHRO and other traffic engineering software, essential.Proficiency with MicroStation and Bentley GEOPAK Civil Engineering Suite V8i, desired. Proficiency with AutoCAD, desired.Proficiency with MS Outlook, MS Excel, and MS Word, essential.REQUIRED KNOWLEDGE, ABILITY, AND SKILLSAbility to work cooperatively and collaboratively with all levels of employees, management, and clients.Ability to organize work, set priorities, meet critical deadlines, and follow-up on assignments with minimal supervision.Ability to maintain confidentiality and protect privileged client information and documents appropriately.Ability to work calmly and effectively in a high-volume office environment under pressure of heavy deadlines.Knowledge of correct English usage including spelling, grammar, punctuation, and vocabulary.LICENSUREValid drivers' license and maintenance of satisfactory driving record.Florida Professional Engineer licensure or ability to obtain Florida licensure within six (6) months of hire.SUPERVISORY RESPONSIBILITIESThere are no supervisory responsibilities associated with this position. Although the Engineer may direct other staff to assist in preparation of plans, studies and reports.ENVIRONMENTWork usually takes place in a clean, pleasant, and comfortable office setting. Site visits may occasionally take place in an outdoor environment.PHYSICAL REQUIREMENTSWhile performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit for long periods of time. The employee is occasionally required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to ten (10) pounds and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.TOOL/PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTSAs dictated by client site protocol, candidate will be required to utilize proper personal protective equipment including but not limited to gloves, sleeves, leather protectors, hard hats, safety vests, safety glasses and shields, hearing protection, safety shoes, covers, helmets/hoods, and any additional tools required for the task at hand.DISCLAIMERThis job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required for this job. Management reserves the right to make adjustments and/or assign or reassign any portion of this job description at any time with or without notice.EQUAL EMPLOYMENT OPPORTUNITY EMPLOYERAVCON, INC. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, AVCON complies with applicable state and local laws governing nondiscrimination in employment at every location in which the company has facilities. This policy applies to all terms and conditions of employment including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.AVCON expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of AVCON's employees to perform their job duties may result in discipline up to and including discharge.Please CLICK HERE and scroll down to our Benefits section to learn more about the potential Benefits you may be eligible to receive with this position.Founded in 1988, AVCON, INC. (AVCON) serves the aviation, facilities, transportation, and development industries and employs over 130 professionals with expertise in all aspects of aviation planning and design; civil, structural, electrical, mechanical, and plumbing engineering; fire protection design; utilities coordination and design; traffic planning and highway design; and a full array of design and construction support services. AVCON has built its reputation on delivering innovative and practical engineering solutions to clients, blending economic, sustainable, and technological elements into each project. Whether working on a building facility, roadway, or airfield, AVCON offers high-level technical expertise based on more than three decades of hands-on experience ensuring the job is done right the first time. AVCON prides itself on partnering with clients in Transforming Today's Ideas into Tomorrow's Reality.NOTICE TO THIRD PARTY AGENCIES: Please note that AVCON does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, AVCON will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, AVCON explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of AVCON. Job Posted by ApplicantPro

Job Description Qualifications • Minimum age of 18, • Valid driver’s license with a clean driving record, • Friendly, welcoming attitude and professional demeanor, • Ability to thrive in a fast-paced environment Responsibilities • As a Service Drive Valet, you’ll play a vital role in our busy, two-lane Service Drive, which sees 120 to 200 appointments daily, • Moving vehicles from the Service Drive to designated areas on the property, • Picking up or delivering guest vehicles to and from their homes as needed (including highway driving), • Supporting a smooth and efficient flow of vehicle traffic on-site, • This is a high-energy, physically active position requiring frequent walking, standing, and running throughout your shift, • must be available to work weekends and evenings

Job Description As part of a design team, the primary responsibilities of the Structural Bridge Project Engineer are to assist with the design, evaluation, and rehabilitation of highway and pedestrian bridges; prepare constructions plans; generate engineering calculations and reports; project specifications; cost estimates; and provide engineering oversight during construction. This position is based in AVCON's Orlando, Florida office. ESSENTIAL FUNCTIONS (may include but are not limited to): • Assists in the various design elements to complete a project, component, or system with other team members with clear and specific objectives involving conventional types of plans, surveys, investigations, structures, and/or equipment., • Assists in the preparation of complete project documentation to include plans, specifications, and engineer estimates including the collection, assembling, and organizing of project data., • Evaluates, selects, and adapts standard techniques, procedures, and criteria to project assignments; formulates and solves problems with guidance and direction., • Plans and coordinates detailed aspects of engineering work; works on multiple projects of moderate size or portions of major projects using time efficiently to stay within budget and deliver on time., • Assists in the preparation of project scopes, tasks, budgets, and schedules., • Assists with proposals including bid documents, project reports, studies, and other documentation., • Receives general direction on key objectives; receives guidance when necessary on unconventional or complex programs, direction on modified techniques, and new approaches on assignments with conflicting criteria., • Interacts and collaborates with clients, contractors, and other project team members., • Attends project meetings and presents specific aspects of engineering assignments/project., • Nights and weekends are generally not required but may occasionally be necessary with little or no advanced notice. ESSENTIAL QUALIFICATIONS • Bachelor's or Master's degree in Civil Engineering or related Engineering field., • 2-5 years' bridge engineering experience., • Knowledge of FDOT design standards and AASHTO Bridge Design Specifications., • Proficiency with AutoCAD or Civil 3D., • Proficiency with OpenBridge Designer or InfraWorks, desired., • Proficiency with MathCAD, preferred., • Proficiency with MS Outlook, MS Excel, and MS Word. REQUIRED KNOWLEDGE, ABILITY, AND SKILLS • Ability to work cooperatively and collaboratively with all levels of employees, management, and clients., • Ability to organize work, set priorities, meet critical deadlines, and follow-up on assignments with minimal supervision., • Ability to maintain confidentially and protect privileged client information and documents appropriately., • Ability to work calmly and effectively in a high-volume office environment under pressure of heavy deadlines., • Ability to orally and verbally communicate complex structural/bridges concepts and solutions in simple, concise, and accurate ways., • Knowledge of correct English usage including spelling, grammar, punctuation, and vocabulary. LICENSURE • Valid drivers' license and maintenance of satisfactory driving record., • Florida Professional Engineer licensure or Engineer in Training (EIT) with ability to obtain licensure within 36 months of hire. MANAGERIAL RESPONSIBILITIES There are no managerial responsibilities associated with this position. ENVIRONMENT Work usually takes place in a clean, pleasant, and comfortable office setting. Site visits may occasionally take place in an outdoor environment. PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit for long periods of time. The employee is occasionally required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to ten (10) pounds and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. TOOL/PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS As dictated by client site protocol, candidate will be required to utilize proper personal protective equipment including but not limited to gloves, sleeves, leather protectors, hard hats, safety vests, safety glasses and shields, hearing protection, safety shoes, covers, helmets/hoods, and any additional tools required for the task at hand. DISCLAIMER This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required for this job. Management reserves the right to make adjustments and/or assign or reassign any portion of this job description at any time with or without notice. EQUAL EMPLOYMENT OPPORTUNITY EMPLOYER AVCON, INC. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, AVCON complies with applicable state and local laws governing nondiscrimination in employment at every location in which the company has facilities. This policy applies to all terms and conditions of employment including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. AVCON expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of AVCON's employees to perform their job duties may result in discipline up to and including discharge. Please CLICK HERE and scroll down to our Benefits section to learn more about the potential Benefits you may be eligible to receive with this position. NOTICE TO THIRD PARTY AGENCIES: Please note that AVCON does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, AVCON will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, AVCON explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of AVCON. Job Posted by ApplicantPro

Job Description Are we the road to your future? We are currently searching for an experienced Senior Certified Bridge Inspector to support our Southeast Region located in Maitland, FL, Tampa, FL, Miami, FL, or Sunrise, FL. To be considered for this position, applicants must have, at minimum, a high school diploma or equivalent. The candidate will be performing bridge safety inspections, writing, and reviewing inspection reports. Additionally, the candidate will be asked to assist with training of assistant inspectors as needed. The candidate will visit various bridges throughout Florida and possibly the United States to aid with structural inspections of bridges and other structures. What you’ll be doing: • Perform bridge inspection, both topside and underwater, of culverts to large complex bridges and ancillary structures (signs, light poles, traffic signals), • Develop inspection reports and review, • Office responsibilities will include report writing, review and data entry What you need to have: • Minimum of 5 years of bridge and/or ancillary inspection experience is required, • Understanding of national bridge inspection methods, Specifications for the Nation Bridge Inventory (SNBI), evaluations, and report preparation is required, • Proficient in Microsoft Word and Excel., • Understanding of FDOT applications is preferred, • Ability to travel out of state, overnight stays may be required, • Ability to climb ladders, and work at heights., • Operation of areal platforms such as bucket trucks and under bridge inspection vehicles is preferred, • Dive training and certification are preferred but not required, • Boat operation skills are preferred., • Successful Completion of FHWA/NHI 130055 Safety Inspection of In-Service Bridges is required with the completion of FHWA/NHI 130053 Bridge Inspection Refresher Training preferred if 130055 was completed more than 5 years ago, • Successful completion of FHWA/NHI 130078 Bridge Inspection Techniques for Nonredundant Steel Tension Members (NSTM), FHWA/NHI 130091 Underwater Bridge Inspection, and FHWA/NHI 130087 Inspection of Ancillary Highway Structures are highly preferred, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license and a satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-HF1 Florida

Job Description We are seeking a Senior Highway Engineer/Project Manager with 10+ years of professional experience to be an integral part of H&H’s transportation team. This position requires a self-starter to lead our engineering team in our Orlando office, primarily serving Central Florida, including FDOT, Orange County, CFX and the City of Orlando. In this position, you will be the main contact between H&H and the client, coordinate with subconsultants and will be responsible for assisting with marketing efforts such as: project identification, client visits, proposals, and presentations. A strong background in Florida DOT District's 2 and 5 design policies and procedures is preferred. H&H is a nationally recognized, full-service infrastructure engineering firm delivering innovative solutions that move communities forward. With more than 139 years of experience and over 600 professionals across 32 offices nationwide, we combine deep technical expertise with the agility of a privately owned firm. From planning and design through construction, we manage the full project life cycle while continually advancing our capabilities, strengthening our national presence, and investing in the people who power our growth. At H&H, you’ll join a firm that is building on its legacy by aligning expertise, expanding opportunity, and positioning itself for long-term, sustainable growth. Responsibilities • Regularly market services to current and prospective clients to assist in the creation of letters of response and technical proposals/presentations., • Responsible for all common PM duties – scoping and fee negotiations, scheduling, budget tracking and responses to ERC comments., • Provide assistance with coordinating and resolving technical issues., • Mentoring and development of younger staff., • Oversee engineering designs, assist in planning and developing engineering projects and coordinate project concepts., • Oversee the creation of engineering documents including typical section packages, pavement design reports, and variation/exception reports., • Coordinate plans, calculations, and specifications amongst multi-discipline engineering teams., • Perform internal quality control procedures. Requirements • Bachelor's in Civil Engineering from an accredited four-year college, • Florida Professional Engineer Registration, • Minimum of ten years’ experience, • Proficiency in Open Roads processes, • Experience with 3D Corridor Modeling is a plus, • Knowledge of FDOT Design Manual, plans production criteria and design standards, • Knowledge of other transportation disciplines and their relationship to roadway design, • Strong verbal communication and technical writing skills, • Ability to train and mentor entry-level staff Benefits We offer a professional work environment, a competitive salary, benefits package and 401(k). EOE M/F/DISABILITY/VETS

Job Description Job Title: Security, Surveillance, and Access Control Installation & Service Technician Experience: Minimum 3 years in security, surveillance, and access control Starting Pay: $26-$36/hour (DOE) + Bonus Potential At BCS, we value your skills, dedication, and ambition. As a locally owned company in Evansville, IN, we offer a tight-knit, collaborative environment with real growth, skill development, and clear paths for advancement. But joining our team isn't just about a great new role, it’s your opportunity to build a high-quality, affordable life in a booming Midwest hub along the scenic Ohio River. • Unbeatable Cost of Living: Your paycheck stretches further here. Enjoy remarkably affordable housing—from historic downtown lofts to spacious suburban homes—without sacrificing quality of life., • Thriving Community & Culture: Explore a bustling downtown, scenic riverfront trails, a booming arts district, and major entertainment venues like the Ford Center., • Commute-Friendly Living: Say goodbye to endless highway gridlock. In Evansville, you are rarely more than 15 minutes away from work, great dining, or outdoor recreation., • Prime Location: Enjoy small-city ease with big-city access—Indianapolis, Louisville, Nashville, and St. Louis are all an easy weekend drive away. Job Summary: We are seeking a experienced and dedicated Security, Surveillance, and Access Control Installation & Service Technician to install, maintain, and service security systems, cameras, and access control devices. The ideal candidate will possess strong technical expertise, excellent problem-solving skills, and a commitment to ensuring our clients’ safety. Key Responsibilities: • Install, test, and troubleshoot security, surveillance, and access control systems at client sites, • Perform routine maintenance and repairs to ensure optimal system performance, • Provide technical support and training to clients on system operation, • Interpret technical drawings, schematics, and installation instructions for proper setup, • Conduct on-site assessments and recommend security enhancements, • Maintain accurate records of service calls, installations, and maintenance activities, • Adhere to safety protocols and company policies during all activities, • Stay current with industry advancements and new security technologies Qualifications: • At least 3 years of experience in security system installation, maintenance, and repair, • Knowledge of CCTV, video surveillance, access control, alarm systems, and related technologies, • Strong troubleshooting and problem-solving skills, • Ability to read and interpret technical drawings and wiring diagrams, • Excellent communication and customer service skills, • Valid driver’s license and ability to travel to various locations, • US citizen fluent in English, • Relevant certifications (Hanwha, DMP, Speco, S2, Galaxy) are a plus, • Skilled in pulling, terminating, and testing low-voltage cables in compliance with code, • Experience installing door hardware such as strikes, magnetic locks, and push/panic devices Work Environment: • Fieldwork involves travel to customer sites, including occasional out-of-town jobs requiring overnight stays, • Physical activity required: lifting up to 75 pounds, climbing ladders, working in confined spaces, • On-call availability may be necessary based on company needs Benefits: • Competitive hourly wage ($25-$35/hr DOE) + bonuses, • 401(k) plan with company matching, • Health, Vision, and Dental Insurance, • Life Insurance and Short-Term Disability, • Flexible work schedule, • Fuel card provided, • Paid time off, • Tools supplied Work Schedule: • Monday to Friday, with potential for weekend work and overtime as required If you're a motivated technician eager to grow within a supportive team, we want to hear from you! Apply today!

Job Description Are we the road to your future? We are currently searching for an experienced Senior Underwater Certified Bridge Inspector to support our Southeast Region located in Maitland, FL, Tampa, FL, Miami, FL, or Sunrise, FL. To be considered for this position, applicants must have, at minimum, a high school diploma or equivalent. The candidate will be performing bridge safety inspections, writing, and reviewing inspection reports. Additionally, the candidate will be asked to assist with training of assistant inspectors as needed. The candidate will visit various bridges throughout Florida and possibly the United States to aid with structural inspections of bridges and other structures. What you’ll be doing: • Evaluate substructure elements (piles, footings, seawalls, fenders) for scour, corrosion, cracking, and marine growth impact, • Document findings with photos, sketches, and detailed field notes; prepare formal inspection reports, • Mentor and supervise junior divers/inspectors; oversee dive safety protocols and equipment checks, • Coordinate with topside inspection teams and project engineers on structural concerns, • Ensure compliance with OSHA commercial diving regulations and client-specific safety plans, • Operate and maintain underwater inspection equipment (cameras, sonar, NDT tools) What you need to have: • Minimum of 5 years of bridge inspection experience is required, • Understanding of national bridge inspection methods, Specifications for the Nation Bridge Inventory (SNBI), evaluations, and report preparation is required, • Commercial diving certification (ADCI or equivalent) with 5+ years of commercial diving experience, • Demonstrated experience in high-hazard, complex underwater inspection work, • Strong understanding of bridge substructure design and deterioration mechanisms, • Proficient in Microsoft Word and Excel., • Understanding of FDOT applications is preferred, • Ability to travel out of state, overnight stays may be required, • Ability to climb ladders and work at heights (50'+) and in varied underwater conditions, • Boat operation skills are preferred., • Successful Completion of FHWA/NHI 130055 Safety Inspection of In-Service Bridges is required with the completion of FHWA/NHI 130053 Bridge Inspection Refresher Training preferred if 130055 was completed more than 5 years ago, • Successful completion of FHWA/NHI 130078 Bridge Inspection Techniques for Nonredundant Steel Tension Members (NSTM), FHWA/NHI 130091 Underwater Bridge Inspection, and FHWA/NHI 130087 Inspection of Ancillary Highway Structures are highly preferred, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license and a satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-HF1 Florida

Job DescriptionJob Title: Carrier Compliance Manager Location: Orlando, FL Type: Direct Hire Compensation: $90,000.00 - $110,000.00 Work Model: Hybrid Hours: 40 hours per week Overview Join a leading national third-party logistics (3PL) provider as a Carrier Compliance Manager, where you'll lead the team responsible for qualifying, onboarding, monitoring, and maintaining a safe, reliable carrier network. This role plays a critical part in protecting freight, preventing fraud, and ensuring carrier partners meet all regulatory, insurance, and operational requirements before moving customer shipments. Responsibilities • Lead, coach, and develop the carrier compliance team, setting clear goals and service levels • Own the carrier vetting and onboarding process from first contact through approval • Manage and optimize carrier vetting platforms such as Highway, including rule sets, alerts, and integrations with the transportation management system (TMS) • Verify carrier authority, insurance, safety ratings, and identity through the FMCSA, Highway, and other data sources • Monitor the active carrier network for changes in authority, insurance, safety scores, or ownership, and act quickly on red flags • Verify carrier banking and remit-to changes to prevent payment fraud • Manage carrier suspensions and deactivations when compliance or fraud concerns arise • Investigate fraudulent activity such as stolen loads, cargo theft, double brokering, and identity theft • Partner with law enforcement, private investigators, insurance providers, and internal operations, claims, and security teams to recover freight and build cases • Write, maintain, and enforce carrier qualification policies and procedures • Track and report compliance metrics such as onboarding volume, approval times, rejection reasons, and fraud attempts stopped • Serve as the go-to expert for Freight Agents, carrier sales, and operations team members on carrier compliance questions • Stay current on FMCSA rule changes, industry fraud trends, and best practices, and update processes to match • Set the long-term strategy for the compliance team and department, planning for growth, staffing, tools, and process improvements • Participate in special projects and handle all other assigned duties as required Requirements • High school diploma or equivalent; Bachelor's Degree in logistics, supply chain, business, or a related field preferred • 3+ years of experience in logistics, freight brokerage, transportation, or adjacent industry • Experience leading a team or owning a process end to end; 2+ years in a people leadership role preferred About the Opportunity This is an opportunity to join a well-established, financially stable national logistics organization with a strong reputation in the transportation industry. The company offers a collaborative culture, long employee tenure, continued growth opportunities, and a commitment to operational excellence. System One, and its subsidiaries including Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. Ref: #431-IT Tampa

Job Description Law Enforcement/Police Officer/Security Officer About the Opportunity Interested in a career as a Law Enforcement/Police Officer? We are an approved NCS recruiting vendor helping qualified candidates connect with career opportunities in state and government criminal investigation. Our goal is to make the initial process easier and help qualified candidates understand the next steps. Getting started is simple: • Submit your resume through ZipRecruiter's Quick Apply process., • We'll review your basic qualifications., • We'll contact you with the PREQUALIFIED application process and help guide you through the next step. Paid training is provided for this challenging and fascinating career. Recruitment BONUS: Qualified applicants may be eligible for a recruitment bonus of up to $50,000, subject to applicable eligibility and service requirements. Overview This is a career-defining opportunity to serve and protect at the highest level while developing your skills in law enforcement, public safety, and operational readiness. • Different divisions and disciplines, such as but not limited to: Patrol, K-9, Motorcycle and more. Primary Duties As a Law Enforcement/Police Officer, you will be responsible for: • Providing physical security and access control for facilities and designated sites., • Supporting protective operations officials and visiting dignitaries., • Enforcing applicable federal statutes and regulations as authorized under law., • Participating in high-profile assignments require discipline, discretion, and professionalism. Requirements • U.S. Citizenship is required., • Must possess a valid U.S. driver’s license., • Be at least 20 years old and less than 40 (There are veteran exceptions at the time of receiving a conditional offer of employment. Exceptions apply for qualifying federal law enforcement service and veterans). Prior positons that are great matches and many fall under "veteran" status: • Coast Guard, • Military, • Air Force, • Marine Corp, • Army, • Navey, • Public Safety Officer, • Protective Services Officer, • Security Enforcement Officer, • Peace Officer, • Federal Protective Officer, • Compliance Enforcement Officer, • Safety & Security Officer, • Public Protection Officer Sworn/Field-Focused Roles • Police Officer, • Patrol Officer, • State Trooper, • Deputy Sheriff, • Highway Patrol Officer, • Border Patrol Agent, • Field Operations Officer Specialized/Investigation-Focused Titles • Criminal Investigator, • Special Agent, • Compliance Investigator, • Intelligence Officer, • Security Operations Officer, • Inspector Correctional/Facility-Oriented Titles • Correctional Officer, • Detention Officer, • Facility Security Officer, • Institutional Safety Officer, • Court Security Officer, • Federal Enforcement Officer, • Diplomatic Security Officer, • Federal Security Officer, • Immigration Enforcement Agent\nCompany Description We connect people to opportunities! We connect people to opportunities!

Job Description Ardurra has an excellent opportunity for a full-time professional engineer to join our Traffic & Safety Team at our Orlando, Florida office! Ardurra is a multidisciplinary civil engineering services firm which provides broad-based solutions tailored to the specific needs of the public and private sector. We leverage the depth of our professional and technical expertise, as well as our integrated structure, to deliver practical, innovative solutions for our clients. We have been creating opportunities for our employees to develop both personally and professionally. As a result, our team has contributed to some of the nation’s most important infrastructure projects. These are projects that can positively impact people’s lives. Primary Function: The Traffic & Safety Engineer performs various tasks related to traffic studies, including preparing studies to identify engineering solutions to traffic operational and safety issues. The candidate should have knowledge of traffic analysis, transportation design concepts, principles, and theories, and a genuine desire to improve safety and mobility on our transportation system. The ideal candidate is also comfortable supporting or leading traffic operations design for one or more components, such as signalization, highway lighting, or signs and pavement markings. However, candidates without design experience are still encouraged to apply. Depending on level of experience, this position could be a Project Engineer, Project Manager, or Senior Project Manager. Work tasks will be performed with considerable independence. Our office follows a hybrid work structure where employees can work remotely some days as approved by the supervisor. Primary Duties: • Perform field reviews, conduct research, and collect and analyze traffic data for transportation projects., • Analyze crash data and identify appropriate countermeasures to improve safety and mobility for all road users, • Analyze and interpret data from traffic modeling software, GIS, or associated databases, • Use specialized traffic engineering computer software to conduct traffic operations and capacity analysis, such as HCS, Synchro, Sidra, and Corsim., • Prepare signal warrant studies, intersection analysis, corridor studies, traffic impact studies, and support PD&E studies, • Attend public meetings and community workshops, • Prepare cost estimates and financial justification for projects through benefit/cost and NPV analysis, • Prepare detailed reports and documentation of the study methodology or design approach, • Other tasks as assigned Education and Experience Requirements: • Bachelor’s degree in Civil Engineering from an ABET accredited program, • Licensure as a Professional Engineer in the state of Florida or ability to obtain within 6 months., • 6+ years of experience in transportation engineering, • Proficiency with Microsoft Office and experience with MicroStation, • Understanding of Highway Capacity and Highway Safety concepts, • Ability to effectively communicate technical information both verbally and in writing, • Demonstrate flexibility and teamwork, • Possess attention to detail, organizational and time management skills, and an interest in improving transportation safety for all modes of transportation Preferred Qualifications • Produce design plans, such as signing and pavement marking, signalization, lighting, and ITS plans, • PTOE or RSP Certification is a plus!, • Experience working with the Central Florida Regional Planning Model (CFRPM) is a plus! Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-KB1

Job Description Are we the road to your future? We are currently searching for an experienced Structural Bridge Engineer in Training (E.I.) to support our Southeast Region located in Tampa, FL or Orlando, FL. To be considered for this position, applicants must have, at minimum, a Bachelor’s degree in Structural or Civil Engineering. The ideal candidate will assist a team of Engineers on a variety of projects such as structural design and engineering studies by performing engineering-related tasks including design, plans production and preparing deliverables on assigned project(s). What you’ll be doing: • Perform assignments requiring knowledge and application of basic structural engineering principles, • Projects may include design and repair of highway bridges and retaining walls, bridge load ratings, review of working drawings and cost estimating, • Assist in the preparation of project quantities and cost estimates, • Assist in the analysis of structures using various structural engineering software programs, • Assist and prepare structural calculations and details of structural elements for various materials, predominantly steel and concrete, • Prepare structural drawings in Open Bridge, MicroStation and AutoCAD, • Work collaboratively as part of our Structures Team What you need to have: • Bachelor’s degree in Structural or Civil Engineering, • Emphasis in structural knowledge, • 1 – 5 years of structural engineering experience (preferably FDOT), • Previous FDOT experience desired but not required, • EIT (E.I) Certification is required, • Experience with MicroStation, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license and a satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-HF1 Florida

Job Description Are we the road to your future? We are currently searching for an experienced Structural Bridge Engineer to support our Southeast Region located in Miami, Tampa, Orlando, or Chipley, FL. To be considered for this position, applicants must have, at minimum, a Bachelor’s degree in Structural or Civil Engineering. What you’ll be doing: • Perform assignments requiring knowledge and application of structural engineering principles, • Projects may include design and repair of highway bridges and retaining walls, bridge load ratings, review of working drawings and cost estimating, • Analyze structures using various structural engineering software programs, • Prepare or check structural calculations and details of structural elements for various materials, predominantly steel and concrete, • Prepare structural drawings in Open Bridge, MicroStation and AutoCAD, • Coordinate with other disciplines such as roadway and drainage to perform checks of documents for conformance to structural drawings, • Work collaboratively as part of our Southeast Region Structures Team What you need to have: • B.S. in Civil Engineering or equivalent combination of education and experience, • 5 - 10 years of engineering experience in bridge design, • Recent experience in steel and/or concrete bridge design, • PE required, • FDOT experience required, • Familiarity with bridge design and analysis software such as Open Bridge and/or Leap Bridge, CSI Bridge, AASHTO BrR, other bridge analysis software, • Experience with preparing drawings in Open Bridge, Microstation, and/or AutoCAD, • Strong interpersonal and communication skills, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license and a satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-HF1 Florida

Job Description Ardurra is seeking a Senior Highway Engineer to join our team in any one of our Miami, Orlando, Tampa, Tallahassee, or West Palm Beach, Florida offices! Our Transportation team offers design capabilities ranging from complex multilevel interchanges to urban arterial reconstruction to complete streets for our clients. Our portfolio features a plethora of signature projects including the I-395 Signature Bridge reconstruction project in Downtown Miami as showcased in the Engineering News-Record! Each of our designs is customized, sustainable, and cost-effective for our clients covering all project types, including Design Build or Design Bid Build. Our clients have relied on our expertise in comprehensive planning, engineering design, and construction management to provide safe and efficient transportation solutions. Primary Function The successful candidate will work on a variety of transportation related design projects developing contract plans, specifications, and estimates for construction. They should have experience with the entire project design delivery process and hands on design/engineering supervision. The candidate will be responsible for supervising and leading engineering design tasks pertaining to roadway geometric design, production of plans and writing of technical reports and documents. An Engineer VI provides expert judgement and analysis for the design, development and implementation of technical products and systems. They resolve highly complex technical matters and recommend alterations to development and design to improve quality of products and/or procedures. They are considered a specialist on complex technical and business matters, work highly independent, and may assume a team lead role for the work group. Primary Duties • Performs process design of multi-discipline transportation engineering projects, including evaluating alternatives, conducting engineering studies and design calculations, and performing preliminary and detailed design, • Provide technical expertise to ensure compliance with design intent, project scope, and state and federal design criteria and standards, • Develops contract plans and prepares technical specifications and cost estimates, • Assists with project execution and delivery including development of project scope, budget, and schedule, • Responsible for the day-to-day activities and coordination of engineers, designers, and technicians as assigned to a specific project, • Perform quality control on engineering work products including design calculations, models, drawings, reports, specifications, and estimates, • Assist with marketing and business development efforts, • Effectively communicate/coordinate with internal and external partners/stakeholders including clients, discipline leads, sub consultants, regulatory agencies, and utility companies Education and Experience Requirements • A Bachelor of Science degree in Civil Engineering from an ABET accredited university or college, • 10+ years of post-licensure engineering experience in transportation design, • Proficient in Microstation and OpenRoads Designer with the ability to train and supervise the technical work of engineers, designers, and technicians, • Proficient in MS Office Suite programs (Word, Excel, PowerPoint, Project), • Experience preparing final design plans, specifications, and estimates, • Strong verbal communication and technical writing skills, • Strong analytical problem-solving, time management and organizational skills Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-BC1

Job Description We are offering an exciting opportunity for a Senior Geotechnical Engineer to join our team in our Fort Lauderdale, Tampa, or Orlando, Florida offices. The successful candidate will provide geotechnical design and construction-related services for bridge and highway projects. H&H is a nationally recognized, full-service infrastructure engineering firm delivering innovative solutions that move communities forward. With more than 139 years of experience and over 600 professionals across 32 offices nationwide, we combine deep technical expertise with the agility of a privately owned firm. From planning and design through construction, we manage the full project life cycle while continually advancing our capabilities, strengthening our national presence, and investing in the people who power our growth. At H&H, you’ll join a firm that is building on its legacy by aligning expertise, expanding opportunity, and positioning itself for long-term, sustainable growth. Responsibilities • Provide geotechnical engineering design and construction-related services for bridge, highway, and other transportation infrastructure projects., • Perform and oversee geotechnical analyses and design for deep foundations, including driven piles and drilled shafts., • Develop and review geotechnical reports, calculations, plans, specifications, and design recommendations., • Evaluate subsurface conditions and geotechnical data to develop appropriate design recommendations and construction approaches., • Provide geotechnical recommendations for foundation systems, including pile capacity, settlement, lateral resistance, and other foundation design considerations., • Perform and review pile analyses and foundation evaluations for bridge structures and other transportation facilities., • Apply AASHTO LRFD, FDOT, FHWA, and other applicable standards, specifications, and guidelines., • Perform numerical modeling and soil-structure interaction analyses using applicable geotechnical analysis software, including FB-MultiPier., • Evaluate soil and site conditions related to ground improvement, slope stability, soil liquefaction, and other geotechnical engineering considerations., • Support geotechnical investigations, field activities, and interpretation of subsurface exploration and laboratory testing data., • Provide technical support during construction, including review of geotechnical issues, foundation installation, and contractor submittals., • Coordinate geotechnical design and recommendations with structural, roadway, drainage, and other engineering disciplines., • Review technical work prepared by engineers and other project team members for accuracy, quality, completeness, and compliance with applicable standards., • Assist project managers with technical coordination, scope development, schedules, and delivery of geotechnical services., • Communicate geotechnical findings, recommendations, and technical issues effectively to project teams, clients, contractors, and other stakeholders., • Mentor and provide technical guidance to junior engineers and staff. Requirements • Master’s Degree in Geotechnical Engineering required., • Five or more years of experience in geotechnical engineering., • Professional Engineer (PE) license required., • Experience with deep foundation design and construction, including driven piles and drilled shafts., • Experience applying AASHTO LRFD and applicable geotechnical design standards., • Familiarity with numerical modeling of soil-structure interaction using FB-MultiPier, Stress, and ground improvement analysis software., • Experience with finite element software, geosynthetics, soil liquefaction, slope stability, and all aspects of pile analysis for bridge foundations. Preferred Qualifications • Experience with bridge and highway transportation projects., • Experience providing geotechnical engineering services through both design and construction phases., • Experience with FDOT and FHWA standards, guidelines, and project requirements., • Experience coordinating with multidisciplinary engineering teams, contractors, and public-sector clients. Benefits We offer a professional work environment, competitive salary, benefits package, and 401(k). EOE M/F/ DISABILITY/VETS

Job Description Ardurra is seeking a Structural Project Engineer to join our team in Orlando, FL! Ardurra’s Transportation team offers design capabilities ranging from complex multilevel interchanges to urban arterial reconstruction to complete streets for our clients. Our portfolio features a plethora of signature projects including the I-395 Signature Bridge reconstruction project in Downtown Miami as showcased in the Engineering News-Record! Each of our designs is customized, sustainable, and cost-effective for our clients covering all project types, including Design Build or Design Bid Build. Our clients have relied on our expertise in comprehensive planning, engineering design, and construction management to provide safe and efficient transportation solutions. We are looking for an engineer with experience in detailed design of bridges and miscellaneous roadway structures to support a wide range of FDOT projects. Projects will include but are not limited to minor and major/complex roadways and interchanges and will offer the opportunity to mentor and guide junior staff and be mentored by some of the top local experts in the transportation industry. Primary Function: Performs detailed phases of design engineering work for a project of moderate size and complexity (e.g., assignment involving a single engineering discipline). The incumbent must be fully competent in all conventional aspects of design engineering and be capable of planning and conducting tasks requiring independent judgment in the evaluation, selection, and substantial adaptation and modification of standard design engineering techniques, procedures, and criteria. Primary Duties: • Perform analysis and detailed design of bridges and miscellaneous roadway structures, which conform with acceptable design standards, and which meet the specific requirements of the Florida Department of Transportation or the Federal Highway Administration., • Prepare engineering calculations and engineering sketches and review drawings and BIM Models., • Manage multiple projects and assume responsibility for project execution within required timeframes., • Perform and assist in QA/QC of final design packages prior to issuing for construction., • Communicate with staff and clients to provide timelines and project updates on a consistent basis., • Providing both written and verbal reports to tight deadlines regarding multiple projects simultaneously. Education and Experience Requirements: • A Bachelor of Science degree in Civil Engineering from an ABET accredited university or college, • Professional Engineer (PE) License in the State of Florida is strongly desired or the ability to obtain your PE License within 6 months of hire, • 6+ years’ experience in Structural Engineering on Transportation/Roadway projects, • Proven proficiency utilizing various computer software packages and automated engineering and design equipment Competencies • Accountability, • Adaptability, • Communication, • Planning & Organization, • Personal Development Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-SC1

Job DescriptionAs part of a design team, the primary responsibilities of the Engineer, Transportation/Roadway are to assist with the planning and design of a variety of large and small highway and multi-use trail engineering projects including geometric design of all classifications of roadways and right-of-way plans; storm drainage design; utilities; signing and marking; and erosion control design; assembly of City, County, and State permits; and provide engineering oversight during construction. This position is based in AVCON's Orlando, Florida office.ESSENTIAL FUNCTIONS (may include but are not limited to):Assists in the various design elements to complete a project, component, or system with other team members with clear and specific objectives involving conventional types of plans, surveys, investigations, structures, and/or equipment.Assists in the preparation of complete project documentation to include plans, specifications, and engineer estimates including the collection, assembling, and organizing of project data.Evaluates, selects, and adapts standard techniques, procedures, and criteria to project assignments; formulates and solves problems with guidance and direction.Plans and coordinates detailed aspects of engineering work; works on multiple projects of moderate size or portions of major projects using time efficiently to stay within budget and deliver on time.Assists in the preparation of project scopes, tasks, budgets, and schedules.Assists with proposals including bid documents, project reports, studies, and other documentation.Receives general direction on key objectives; receives guidance when necessary on unconventional or complex programs, direction on modified techniques, and new approaches on assignments with conflicting criteria.Interacts and collaborates with clients, contractors, and other project team members.Attends project meetings and presents specific aspects of engineering assignments/project.Nights and weekends are generally not required but may occasionally be necessary with little or no advanced notice. ESSENTIAL QUALIFICATIONSBachelor's degree in Civil Engineering.2-5 years' experience.Proficiency with AutoCAD, AutoCAD Civil 3D or Bentley OpenRoads.Proficiency with MS Outlook, MS Excel, and MS Word.REQUIRED KNOWLEDGE, ABILITY, AND SKILLSWorking knowledge of Florida Department of Transportation design requirements for roadway development and Federal/State funding.Ability to work cooperatively and collaboratively with all levels of employees, management, and clients.Ability to organize work, set priorities, meet critical deadlines, and follow-up on assignments with minimal supervision.Ability to maintain confidentially and protect privileged client information and documents appropriately.Ability to work calmly and effectively in a high-volume office environment under pressure of heavy deadlines.Knowledge of correct English usage including spelling, grammar, punctuation, and vocabulary.LICENSUREValid drivers' license and maintenance of satisfactory driving record.Engineer in Training (EIT) with ability to obtain licensure within 36 months of hire. SUPERVISORY RESPONSIBILITIESThere are no supervisory responsibilities associated with this position.ENVIRONMENTWork usually takes place in a clean, pleasant, and comfortable office setting. Site visits may occasionally take place in an outdoor environment.PHYSICAL REQUIREMENTSWhile performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit for long periods of time. The employee is occasionally required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to ten (10) pounds and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.TOOL/PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTSAs dictated by client site protocol, candidate will be required to utilize proper personal protective equipment including but not limited to gloves, sleeves, leather protectors, hard hats, safety vests, safety glasses and shields, hearing protection, safety shoes, covers, helmets/hoods, and any additional tools required for the task at hand.DISCLAIMERThis job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required for this job. Management reserves the right to make adjustments and/or assign or reassign any portion of this job description at any time with or without notice.EQUAL EMPLOYMENT OPPORTUNITY EMPLOYERAVCON, INC. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, AVCON complies with applicable state and local laws governing nondiscrimination in employment at every location in which the company has facilities. This policy applies to all terms and conditions of employment including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.AVCON expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of AVCON's employees to perform their job duties may result in discipline up to and including discharge.Please CLICK HERE and scroll down to our Benefits section to learn more about the potential Benefits you may be eligible to receive with this position.Founded in 1988, AVCON, INC. (AVCON) serves the aviation, facilities, transportation, and development industries and employs over 130 professionals with expertise in all aspects of aviation planning and design; civil, structural, electrical, mechanical, and plumbing engineering; fire protection design; utilities coordination and design; traffic planning and highway design; and a full array of design and construction support services. AVCON has built its reputation on delivering innovative and practical engineering solutions to clients, blending economic, sustainable, and technological elements into each project. Whether working on a building facility, roadway, or airfield, AVCON offers high-level technical expertise based on more than three decades of hands-on experience ensuring the job is done right the first time. AVCON prides itself on partnering with clients in Transforming Today's Ideas into Tomorrow's Reality.NOTICE TO THIRD PARTY AGENCIES: Please note that AVCON does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, AVCON will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, AVCON explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of AVCON. Job Posted by ApplicantPro

Community: Village on the Green Address: 500 Village PlaceLongwood, Florida 32779 Pay Range $15.14-$20.82+ Hourly Live your purpose. Grow your career. Thrive through teamwork. Create meaningful, personalized experiences. At Lifespace, team members are at the center of delivering a purpose driven experience for our residents! We provide an environment where each team member can live their aspirations, developing in their career, making a difference, and being a part of a meaningful mission. Join our team of Drivers today! A few details about the role: • Drive residents safely to scheduled destinations. Track assigned pick-ups and drop offs to ensure timely service., • Provide for high level of resident engagement., • Maintain cleanliness of bus and automobiles. Report needs for vehicle maintenance, such as oil changes, fluid levels, belts, batteries, etc. And here’s what you need to apply: • High school diploma or equivalent., • Valid class B commercial driver's license with passenger endorsement preferred (CDL may be required for certain vehicles at some communities), • One-year experience driving for seniors is preferred., • Must have a clean driving record (no violations), • Knowledge of traffic and highway safety rules and regulations, and of the precautions necessary to avoid accidents. As part of the hiring process and in accordance with Florida law, healthcare candidates who accept a job offer are required to complete a background screening through the_This step is quick, secure, and helps us finalize your employment as smoothly as possible. Lifespace has successfully served older adults for 50 years, and this is just the beginning. With new opportunities, continued growth, and the support from your Lifespace team members, get ready to ignite your life and experience Our Space. COMPANY OVERVIEW: Lifespace Communities, headquartered in Dallas, Texas, is one of the nation's largest nonprofit senior living organizations. For over 50 years, we have been dedicated to creating vibrant communities across the country where older adults are empowered to live their aspirations with purpose, independence, and peace of mind. Driven by a commitment to exceptional service, innovation, and meaningful connections, our team members work together to enrich the lives of our residents every day. At Lifespace, you'll find more than a career, you'll find an opportunity to make a lasting impact while growing professionally in a collaborative, mission-driven organization. Equal Opportunity Employer

Plan, direct, and coordinate construction of heavy civil/heavy highway construction projects to ensure goals or objectives of projects are accomplished within prescribed time frame and funding parameters.This will be achieved by performing the following duties personally or through subordinate super

QA/QC Manufacturing Solutions Specialist, Heavy Transportation (on & off highway) MIDWEST USA. REMOTE WORK LOCATION: anywhere in the Midwest USA with frequent travel to customer manufacturing sites.

The concrete finisher is responsible for the overall quality of leveling and texturizing of concrete pavements, sidewalks, driveways, etc. on concrete surfaces on our jobs. Must be able to work as part of a team to accomplish a common goal as directed by the Foreman. Essential Functions: • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Watching gauges, dials, or other indicators to make sure a machine is working properly., • Maintain consistent quality and workmanship texture in paving and handwork., • Checks the concrete forms for appropriate depths and angles before the concrete is poured., • Ensure construction per plan requirements., • Assure all joints are properly matched., • Cuts and removes all surface imperfections before the concrete has fully hardened., • Assist in handwork, prep work and cleanup as directed by the foreman., • Performs all functions as directed by foreman in conjunction with preparation, layout, cleaning, compaction, and finishing operations., • Able to work with slip form paver at single and dual lane widths. Other: Understand and comply with all Company Safety policies and procedures as well as OSHA Regulations. Assists with loading and unloading trucks & deliveries. Competencies: • Detail oriented, • Self-motivated, • Process driven, • Teamwork orientation Supervisory Requirements: • This position has no supervisory responsibilities. Work Environment: This is a field based role. Employee will be working on heavy civil and highway construction sites. The noise level in the work environment and job sites can be loud. The position regularly works near moving mechanical parts and in outside conditions that include inclement weather, heat and humidity, and exposure to dust, concrete and asphalt. Physical Demands: The position lifts heavy objects, walks and stands for long periods of time and performs physical labor under adverse field conditions. The employee lifts, pushes, pulls or carries objects and uses abdominal and lower back muscles to provide support over time without fatigue. The position requires good manual dexterity (hand, hand with arm, two hands) and multilimbed coordination. The employee must have excellent stamina. Position Type/Expected Hours of Work: • This is a full-time position. This position will occasionally require long hours and weekend work. Average +/-50 hours per week. Travel: • The role may require some travel. Required Education and Experience: • 3-5 years concrete finisher experience., • Must adhere to OSHA safety protocol, and work in a drug-free environment, • Must be reliable/have reliable transportation, • Has worked around slip form paver. Preferred Education and Experience: • Construction industry experience preferred, • Takes full ownership of assigned projects and can work independently Additional Eligibility Requirements: Must possess or be able to obtain a valid and appropriate state driver's license prior to employment. Our Mission and Vision: We are an American family-owned and operated heavy civil contractor dedicated to providing innovative solutions to help meet the nation's growing infrastructure needs. To be America's preferred heavy civil contractor, expanding our markets and services while staying true to our family-oriented culture and fostering an environment where our employees can prosper. Our Core Values: Family, Safety, Integrity, Innovation, Commitment, Empowerment Equal Opportunity Employer: Superior Construction provides equal opportunity employment to all individuals regardless of their race, color, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.

Michael Baker International's Construction Services staff supports clients by acting as their trusted on-site agent through all phases of construction, from pre-design to close-out, by providing qualified construction managers, inspectors, constructability reviewers, schedulers, estimators and safety experts. As new technologies evolve throughout the construction industry, innovative ideas are required to maintain and deliver successful construction projects. Michael Baker is seeking a Construction Inspector to join the team in Orlando! The Construction Inspector will be responsible for performing construction engineering and inspection (CEI) services on FDOT roadway construction projects. This position ensures contractor compliance with FDOT plans, specifications, special provisions, and applicable codes while maintaining high standards of safety, quality, and documentation. What You'll Do: • Oversee daily inspections and testing of roadway construction materials, including earthwork, subgrade, base, and asphalt., • Manage inspections of concrete installations such as barrier walls, bridge decks, MSE walls, and drilled shafts., • Maintain detailed daily logs of construction activities, inspection results, and contractor performance., • Ensure all work meets FDOT specifications and OSHA safety regulations., • Interpret construction plans and specifications, and provide guidance to contractors and project stakeholders., • Utilize Site Manager software for accurate and timely documentation of project data., • Safety Enforcement: Promote and enforce safe work practices on-site. What You Need to Succeed: • High School Diploma or GED required., • 4+ years of experience in highway construction or related field., • Familiarity with construction elements including earthwork, asphalt paving, concrete structures, storm drainage, traffic control, and bridge components., • FDOT CTQP: Final Estimates I, Concrete Field Technician I & II, Asphalt Roadway I & II, Earthwork I & II, Pile Driving, Drilled Shaft Inspection, required. Compensation: The approximate compensation range for this position is $25/hr - $34/hr. This compensation range is a good faith estimate for the position at the time of posting. Actual compensation is dependent upon factors such as education, qualifications, experience, skillset, and physical work location. Why Choose Us: • Medical, dental, vision insurance, • 401k Retirement Plan, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Life, AD&D, short-term, and long-term disability, • Professional and personal development, • Generous paid time off, • Commuter and wellness benefits Michael Baker International, a leading provider of engineering and consulting services, including design, planning, architectural, environmental, construction and program management, has been solving some of the world's most complex infrastructure challenges for more than 85 years with a legacy of expertise, experience, innovation and integrity. Based in Pittsburgh and with over 100 offices nationwide, we partner with clients on everything from roads, bridges, tunnels, mass transit, and airports, to water treatment plants, arctic oil pipelines, environmental restoration and specialized overseas construction. We serve as a trusted adviser to the communities we serve, making them safer, more accessible, more sustainable and more prosperous. We provide visionary leadership in facilitating transformational change for our clients. Our work delivers differentiating innovations and dedicated experts who challenge the status quo and share a world of diverse experience and an impassioned entrepreneurial spirit. We deliver quality of life. We Make a Difference. Michael Baker International is proud to be an Equal Opportunity Employer. Michael Baker International provides equal employment opportunity for all persons, in all facets of employment. Michael Baker International maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks. We encourage all qualified applicants to apply for any open position for which they feel they are qualified and all will receive consideration for employment without regard to race, color, religion, creed, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, familial status, pregnancy or childbirth, genetic information, disability, protected veteran status, status with regard to public assistance, or membership or activity in a local human rights commission, or any other legally protected status. EEO is the Law. Applicants to and employees of Michael Baker International are protected under Federal law from discrimination. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. There is no current application deadline. Michael Baker will continue to accept applications on an ongoing basis until the position is filled or no longer needed.

MasTec Civil is hiring a Senior Estimator to assist in the growth of our North Florida market! This individual should have a minimum of five years of estimating experience and minimum two years of field experience in Heavy Civil Construction, specifically with roadways and bridges. The person in this role should also be knowledgeable in contract delivery methods: design-build, design-bid-build, Lump Sum, etc., and contract experience with: FLDOT/turnpike, cities/counties, airport authority. This candidate must be a self-motivated person, willing to collaborate with peers, teach young engineers, and constantly strives to identify problems and solutions. This role is responsible for leading the estimating process on major highway, bridge, and transportation infrastructure projects from concept through bid submission. The preference is for the person in this role to be located within the North FL/Jacksonville radius. Eligible for hybrid work arrangement. MasTec Civil (formerly known as Condotte America), a MasTec Company, is a heavy highway contractor specializing in the construction of complex transportation projects that include roadway, bridges, interchanges, mass transit, and tolling facilities. In short, we build the roads and bridges connecting our families, communities, and nation. In doing so, client satisfaction is of primary importance to us, and our record reflects our emphasis on understanding our client needs in order to exceed their expectations. MasTec Civil is part of the MasTec Clean Energy & Infrastructure (CE&I) business segment. The CE&I segment generates over $4.5 billion in annual revenue, providing construction services across our renewables, industrial, infrastructure, and general building operating groups. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Join one of the largest construction firms in the country. Responsibilities: • Understand bid items, basis of estimate, skills to identify errors and discrepancies in plans, and specifications, and solutions., • Wide understandings reading plans, specifications, request for proposal, request for information, addendums, technical special provisions, etc., • Build green sheet estimate, breakdown activity structure, construction schedule, and risk matrix analysis., • Create job budget for awarded contracts., • Understand bid strategy, cost savings initiative, and management skills., • Perform accurate, and within the time frame quantity takeoffs., • Capable to individually estimate an entire job., • Study and review all estimating reports: equipment total hrs., labor total hrs., key indicators, equipment balance analysis, etc., • Constantly review updated FDOT Standards and Specifications., • Full review of bid submittal package, and lead estimating discussion with company executives., • Obtain clarifications on plans and specifications from owner or engineer of records., • Coordinate and invite suppliers and subcontractors to quote different scope of work., • Analyzes suppliers and subcontractor pricing input when required., • Build and strength subcontractor and supplier relationship., • Complete understanding of unit cost analysis., • Assists to pre-bid meeting and bid submittals., • Keep updated information regarding commodity trade prices., • Keep looking construction technologies and techniques., • Maintain continue education in construction: assist to engineering convention, forum, etc., • Continue communication with field personnel (project engineer, superintendent, foreman, fleet manager, etc.) to track and adjust as necessary unit costs. Qualifications: • B.S. in Civil Engineering, Construction Management, or related field., • 5+ years of estimating experience in heavy civil construction, preferably on projects valued between $20M - 300M+., • Demonstrated experience in estimating DOT, highway, roadway, bridge, or transportation infrastructure projects., • Knowledge/Skills/Abilities: Possess high work values, integrity, and ethical standards. Possess great focus to meet and exceed company requirements and expectations. Possess good organization skills and strong verbal and written communication skills. Must have knowledge in bridge and roadway construction. Savvy in Florida soil (rock/clay), foundations, concrete structures, temporary structural systems, underground and utility work, earthwork, signalization, roadway lighting and signing, intelligent transportation system, safety standards, etc. Knowledgeable in design-build and design-bid-build contracts with FDOT and Turnpike Enterprises. Strong understanding of earthwork, grading, drainage, asphault paving, concrete, structures, utilities, MOT, and highway construction practices. Proficiency with estimating software such as HCSS HeavyBid, AGTEK, Bluebeam, or similar platforms. Ability to manage multiple pursuits while meeting strict bid deadlines. Teaching, and mentoring skills., • Software Skills and Certifications: 30-Hour OSHA training Microsoft Office: Outlook, Excel, Word, PowerPoint Scheduling software, P6 Primavera Heavy Bid from HCSS Bluebeam by REVU AutoCAD- Civil 3D MicroStation AGTEK What's In It For You: • Financial Wellbeing Competitive pay with ongoing performance review and merit increase Salary range $145,000 - 160,000 depending on experience. 401(k) with company match & Employee Stock Purchase Plan (ESPP) Flexible spending account (Healthcare & Dependent care) Health & Wellness Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance Family & Lifestyle Paid Time Off, Paid Holidays, Bereavement Leave Military Leave, including Differential Pay and Benefits Continuation Employee Assistance Program Planning for the Unexpected Short and long-term disability, life insurance, and accidental death & dismemberment Voluntary life insurance, accident, critical illness, hospital indemnity coverage Emergency Travel Assistance Program Group legal plan

Tampa, FL Hiring Immediately!! Weekly Pay!! Quarterly Bonus!! The Mobile Fleet Mechanic position is responsible for maintaining vehicle/equipment by completing inspections and preventive maintenance requirements; correcting vehicle/equipment deficiencies; making adjustments and alignments; keeping records. The position works under the direction of the Fleet Manager and is accountable for the tasks of troubleshooting, repairing and maintaining production and facility vehicle/equipment to support daily work activities while maintaining safety objectives and company processes. Essential Job Functions: Includes, but is not limited to, the job specifications contained herein. Additional duties or job functions may be required as deemed necessary by management personnel to contribute to the team effort by accomplishing related results as needed. • Ability to work on construction vehicle/equipment, • Able to determine vehicle/equipment condition by conducting inspections and diagnostic tests; identifying worn and damaged parts, • Keeps vehicle/equipment available for use by completing preventive maintenance schedules; installing component and part upgrades; controlling corrosion; completing winterization procedures, • Corrects vehicle/equipment deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, hydraulics; completes machine shop operations; making adjustments and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, oil systems, control linkages, clutches, and traction units., • Verifies vehicle/equipment performance by conducting test drives; adjusting controls and systems., • Complies with federal and state vehicle/equipment requirements by testing engine, safety, and combustion control standards., • Maintains vehicle/equipment appearance by cleaning, washing, and painting., • Maintains vehicle/equipment records by annotating services and repairs., • Keeps shop vehicle/equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; calling for repairs., • Contains costs by using warranty; evaluating service and parts options., • Keeps supplies ready by inventorying stock; placing orders; verifying receipt. Desired Qualifications: • Must be willing to travel to different branch locations as needed using company provided service truck. May require occasional overnight stay, • ASE Certified preferred but not mandatory, • Must have electrical and drivability diagnostic experience- Required, • 1-3 years of Mechanic experience of Diesel and Gas engines for on-highway vehicles, • Light/Medium/Heavy Duty Vehicle & Trailer Repair Experience - Required, • Off-Highway equipment experience such as front-end loaders, skid steers, mini excavators, forklifts, • Experience in performing Annual Federal DOT Inspections, • Class A CDL preferred but not mandatory Benefits: ACME employees are paid weekly. ACME also offers a comprehensive benefits package including medical, dental, and vision-in addition to the following benefits: • Holiday Pay, • Vacation Pay, • Paid Time Off, • 401K, • Performance Bonus Requirements: • Repeated physical effort including driving for several hours per day or several hours at a time, standing and walking for extended periods of time (more than several hours), loading and unloading equipment into and out of company vehicles, walking on varying ground surfaces and frequently lifting a minimum of 50 pounds, • Working from elevated platforms, ladders or truck beds, • Operating hand/power tools, manual dexterity to operate keyboards and smart phones, physical agility to use arms, legs and hands repetitively, • Working outdoors, working safely under adverse environmental and weather conditions which include high speed traffic areas, heavy construction equipment, fuel fumes and construction substances, • Comfortable around vehicles moving through work zones and maintaining constant awareness of surroundings on construction site including placement of machinery and equipment, other employees and construction activities, • Vision adequate to see moving vehicles, read highway construction MOT signs, read instructions, manuals, reports, and construction plans, • Hearing adequate to hear approaching vehicles, audible commands at a distance from supervisors, conversations in person, and over the telephone, • Communicating clearly - both written and verbally, ability to complete daily paperwork as required by supervisor, • Working a flexible schedule which can include day or night shifts, weekends and/or holidays, adjusting to a changing work schedule, working overtime and working individually and as a team with other employees, • Valid driver's license required, will require passing MVR and controlled substance test, may require background and criminal record check. Knowledge of local driving rules and regulations, • Must maintain company standards post-employment for background checks, criminal record, driving record and controlled substance/drug testing, • Computer literacy, • Ability to create accountability and to lead by example, • Strong team building, decision-making and people management skills, • High School Diploma or Equivalent