Industrial construction jobs in Austin, Texas - Page 3Create job alerts

Job Description Salute is a leading provider of cutting-edge Data Center Infrastructure Services, dedicated to serving data center clients worldwide. We pride ourselves on delivering sustainable solutions, unparalleled reliability, and outstanding customer service. As we continue to grow, we are seeking a dynamic and experienced Data Center Operator to join our team and drive our relationships with hyperscale clients to new heights. Data Center Operator: The Data Center Operator is responsible for the operational integrity, commissioning, and regulatory compliance of the electrical power, mechanical, monitoring and control systems, and the processes that maximize customer uptime in the most cost-effective way for highly available, concurrently maintainable, fault tolerant mission-critical data center environments. The Data Center Operator is responsible for ensuring that all electrical, mechanical, and fire/life safety equipment within the data center are operating at peak efficiency and the utmost levels of reliability. This involves both planned preventative maintenance of equipment, daily corrective work, and response to emergency issues. The Facilities Engineer is our front line when it comes to hands-on electrical and mechanical equipment troubleshooting, and serves as an expert, highly capable technical resource, reporting to the Site Manager and interacting with onsite Facility Technicians and any third-party vendors. They are expected to be a singular focal point for all facility operations within a given data center. Data center equipment that supports mission-critical servers must maintain better than 99.999% uptime. This equipment includes, but is not limited to standby diesel generators, related fuel systems, electrical switchgear, UPSs, PDUs, AHUs, related thermal management equipment and systems, chemical treatment systems (where applicable), pumps, motors, VFDs, and building automation systems. Responsibilities: • Place SAFETY at the top of anything and everything that they do – without fail., • Focus on the tasks and activities given to them and remain consistently focused on SAFETY., • Operate, monitor, maintain, and respond to abnormal conditions of facility systems., • Complete planned and ad-hoc preventive maintenance work assignments, requiring the skill and direction of several electrical, mechanical, maintenance trades and engineering disciplines., • Conduct periodic inspections of building systems, i.e., HVAC, electrical distribution, maintain mechanical equipment rooms/enclosures to ensure clean, functional, and safe conditions., • Rapid response, investigation and management of indoor emergency situations and air quality complaints, including humidity., • Have a complete working knowledge on creating, closing, and tracking "work requests" (WR). Initiate or respond to work orders, follow-up and verify completion of work., • Monitor performance/note deficiencies of service contractors and recommend changes as necessary., • Provide applied electrical, mechanical, integrated control and water chemistry technical expertise for the entire data center., • Directly interface with management team, contractors, and consultants for all phased data center construction commissioning, including integration and testing of new systems while maintaining critical systems online., • Work with the Facility Technician and other stakeholders to track and complete a preventive and predicative maintenance schedule for critical maintenance and system commissioning., • Ensure data center operates at maximum operational efficiency, including:, • Analyzing existing operating conditions, • Recommending new technologies and improving overall efficiency and cost reduction., • Responsible for data center white space and back-of-house electrical loading and capacity, including client installations and systems., • This position may require unusual hours of work approximately once every other week to meet critical maintenance windows and scheduling., • Directly manage contractors and consultants for daily operations and critical maintenance (UPS systems, generators, switchgear, and chiller maintenance)., • Provide applied electrical, mechanical, integrated control and technical expertise for the entire data center., • Directly manage and supervise Facility Technicians in all aspects of day-to-day operations and maintenance of all electrical and mechanical critical facility equipment., • On-call to respond to emergency situations at the data center., • Perform other related duties and responsibilities as assigned by management., • Strong background in operating mechanical and electrical critical systems, design review, layout, installation, including the ability to read and interpret electrical and mechanical one lines., • Ability to conduct power- and thermal system capacity, safety, and code compliance assessments., • Hands-on experience installing, maintaining, and troubleshooting large commercial and industrial electrical systems including:, • Medium-voltage switchgear, • 480/277 Volt and 208/120-volt electrical generation and distribution systems, • Diesel powered AC generators., • Static UPS systems (where applicable), • Dynamic Rotary UPS Systems (where applicable), • Multi-string flooded cell batteries and monitoring systems, • Static switches, • PLC and relay logic controls, • Power monitoring systems, • Data center power distribution and management systems, • Current knowledge of NFPA Electrical, Fire and Life Safety and building codes, or local regulatory equivalent within the location of the data center., • Knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25 and compliance issues, • Expert knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations), • An excellent understanding of the electrical and mechanical systems involved in critical data center operations, including systems such as feeders, transformers, generators, switchgear, UPS systems, ATS units, PDU units, chillers, pumps, air handling units, and CRAC units., • 4-year degree in an engineering discipline from an accredited university., • Full use of sight, hearing and voice are required as well as full motor skills., • The ability to lift up to 23kgs (50lbs), bend, stoop, reach overhead and stand for long time periods., • A minimum of 5 years of directly related experience in the operation, installation, and maintenance of data center critical equipment, building systems with in-depth technical understanding and knowledge of all HVAC, electrical, plumbing, fire/life safety, and control systems., • Knowledge of the electrical and mechanical systems used in a data center environment, including: Feeders, Transformers, Generators, Switchgear, UPS systems, ATS/STS units, PDU/PMM units, Chillers, Air handling units and CRAC units., • Good observation skills and problem-solving ability., • Ability to lift and carry heavy equipment, up to 40lbs., • Ability to climb ladders and multiple flights of stairs to access elevated equipment, • Ability to stand for long periods of time in various work environments, • Ability to bend, stoop, kneel, and reach for equipment related tasks, • Basic physical fitness to respond quickly to emergency situations and navigate areas quickly, • Ability to move quickly and efficiently withing various work environments to troubleshoot issues or respond to emergencies., • Good hand-eye coordination and dexterity for working with small components and connectors, • Clear vision, with or without correction, to perform tasks requiring attention to detail and precision while wearing safety glasses, • Ability to differentiate between color-coded warning signs, labels, and cables, • Ability to work in environments with a wide variety temperature inside a facility, • Ability to work outdoors in various weather conditions, including extreme temperatures, rain, or snow, • Capability to work in environments with elevated noise levels while wearing hearing protection Salute is an equal opportunity employer committed to celebrating diversity, creating an inclusive environment for all employees, and providing equal employment opportunities to all applicants; if you require a reasonable accommodation to participate in the job application or interview process, perform essential job functions, or receive other benefits and privileges of employment, please contact our Human Resources department at for more information. SHIFT: Rotating Shifts (Nights) HOURS: 5pm - 5am (12 hr shifts)

Job Description Senior Structural Engineer – Lenexa, KS GBA, a professional, full-service architecture and engineering firm is seeking a qualified candidate to fill a Senior Structural Engineer position. GBA offers the opportunity to work in either a specialized market, or on projects in a variety of markets from start to finish, in a collaborative team environment, with room for career growth and development. We specialize in complex building types and structures such as: • Pharmaceutical manufacturing facilities – clean rooms, R&D/QA labs (Lenexa, Broomfield), • Industrial and manufacturing facilities and structures (Lenexa, Austin, Broomfield), • Wastewater treatment structures (Lenexa, Austin) The ideal candidate will be interested and capable of leading structural design efforts in one of our offices and/or markets, with and business development. They will have experience in a consulting environment with a proven ability to mentor and train staff engineers, a strong interest and ability to cultivate new business through client engagement, and superior project management skills. Responsibilities: • Develop and manage project scopes, schedules, and budgets, • Manage all aspects of structural design projects, delivering quality services, • Assist a multi-discipline team of architects and engineers with conceptual project design, both verbally and graphically, • Prepare and/or direct others in preparing structural construction documents and calculations, • Handle all aspects of Construction Administration, • Assist in QA/QC reviews of work performed by other engineers, • A Bachelor’s degree in Civil Engineering or Architectural Engineering is required, • Must be a Licensed P.E., • 8+ years of experience in structural building design and/or industrial structures, • The ability to manage several projects and responsibilities simultaneously while maintaining awareness of scope, schedule, budget and status of all assigned projects (including projects assigned to staff engineers on your projects and any direct reports), • Experience with project management, including development/management of scopes, schedules, and budgets, • Should be a self-starter and detail oriented with an ability to see the overall scope of project while still maintaining a curiosity to learn, • Good written and verbal communication skills, • A P.E. or S.E. license in the state of California or an S.E. in another state is a plus, but is not required, • A strong interest in developing work for new clients (an existing client base would be considered beneficial, but is not required)

Job Description Position Overview As a Project Engineer II at SICE Inc., you will play a pivotal role in overseeing and supporting field operations across various projects. Your primary responsibility is to ensure that foremen and crews are equipped with the necessary materials, equipment, and information to execute tasks efficiently. While reporting to the Project Manager, you will be instrumental in aligning project execution with customer objectives, all while safeguarding and promoting the interests of SICE Inc. Key Responsibilities • Project Coordination: Assist in all facets of project management, ensuring seamless communication between the project manager, foremen, and on-site crews., • Material and Equipment Management: Oversee the procurement, tracking, and delivery of project-specific materials and equipment, ensuring timely availability on-site., • Plan Interpretation: Read and interpret engineering plans and blueprints to guide construction activities accurately., • Project Planning: Participate in project planning sessions, evaluating and reviewing plans to ensure feasibility and compliance with project objectives., • Estimation Support: Assist in estimation activities, including quantity take-offs, submittals, reviewing provider proposals, and conducting negotiations., • Field Management: Monitor and support self-perform and subcontractor crews on-site, ensuring adherence to project timelines and quality standards., • Compliance and Safety: Ensure all project activities comply with relevant safety standards and regulations, including those set by TxDOT and other DOT entities., • Educational Background: Bachelor’s degree in Civil, Industrial, Electrical Engineering, or a related field., • Experience: Demonstrated experience in underground scopes, including trenching, boring, and ground box (handhole) installations., • Technical Skills: Proficiency in reading and interpreting construction plans and blueprints., • Software Proficiency: Experience with enterprise-level platforms, including MS Office (with strong Excel skills) and Bluebeam software., • Communication Skills: Strong written and verbal communication abilities., • Physical Demands: The role requires regular physical activity, including sitting, standing, walking, climbing, balancing, stooping, crouching, and stepping over obstacles., • Lifting Requirements: Ability to lift and/or move up to 50 lbs as needed., • Work Environment: Exposure to both indoor office and outdoor conditions, including inclement weather, heat, and humidity. Work environments may also include areas with dust, loud noise, and vibrations., • Safety Hazards: Potential exposure to construction site hazards such as moving machinery, power tools, electrical equipment, hazardous substances, and elevated noise levels., • Regulatory Adherence: Ensure compliance with all relevant safety regulations and standards, including OSHA guidelines and company-specific safety protocols., • Risk Management: Identify potential safety hazards on-site and implement appropriate mitigation strategies., • Training: Participate in ongoing safety training programs to stay updated on best practices and regulatory changes., • Emergency Preparedness: Assist in developing and implementing emergency response plans for project sites. CONDITIONS OF EMPLOYMENT • Engineering Degree., • Proficient computer/office skills (EXCEL, WORD, etc)., • Must pass a pre-employment criminal background check., • Must pass a pre-employment Drug and Alcohol Test, • Must demonstrate eligibility to work in U.S., • Possession of a valid driver's license is a requirement for this job. WHY JOIN US? WE HAVE MANY BENEFITS: • Up to three weeks of paid time off every calendar year (15 days total). Eligibility to earn +1 day every calendar year after employee’s 3-year anniversary., • Several paid company holidays, • Individual Health Coverage for the employee and for other coverage levels, including spouse, children and family., • Dental coverage plan,, • Vision coverage plan,, • Critical Illness coverage plan,, • Accidental Injury coverage plan,, • Hospital Care Indemnity coverage plan,, • Short Term Disability Insurance (SICE Inc. currently offers 100% premium contribution), • Life and AD&D Insurance (SICE Inc. currently offers 100% premium contribution), • Eligibility to participate in SICE’s 401K Plan, with 50% employer match., • Training and Growth opportunities. READY TO JOIN THE TEAM? You may upload your resume on your online application in the following formats to the link provided at the very top of the page. As well as remit via email to • Word, • PDF No phone-calls, please.

Job Description MWH is a leading water and wastewater treatment-focused general contractor in the US with a rich history dating back to the 19th century. Fueled by the mission of Building a Better World, our teams are rapidly growing across the nation. As a company committed to our team's well-being and growth, we offer a supportive work environment, opportunities for advancement, and the chance to contribute to a mission that shapes the future. Your expertise and ambition are valued here. The work we do matters. The critical systems infrastructure we build changes lives, betters' communities, and improves ecosystems. If you're passionate about this, we want to hear from you! About the Role MWH is currently seeking a qualified Health & Safety Manager to support critical water, wastewater, and advanced water treatment plant projects for both municipal and industrial clients. The position will be based out of the Austin, TX Metropolitan area. Essential Functions • Provide guidance and assistance to Operations in establishing and maintaining safety operations in compliance with applicable laws and regulations, and best practices., • Administer, direct and manage compliance with the project to ensure safety goals are met., • Provide a strategic vision for creating safe work areas for affected employees and general public., • Conduct comprehensive reviews of potential risks on projects and identifies controls/mitigation measures., • Perform inspections and audit project sites periodically with an emphasis on hazard recognition, unsafe behaviors, and corrective measures & implementation – interface with clients, employees and subcontractors ensuring safety programs and specifications are met., • Supervise, develop and manage other safety professionals to ensure effective administration of accident prevention efforts., • Develop and deliver training resources. Leverage 3rd party training resources when necessary. Develop required training matrix associated with hazards and in line with project schedule., • Minimum of 5 years of construction safety experience on a construction site; ability to recognize hazardous situations and implement corrective measures as needed; advanced knowledge of local, state and federal regulations, including OSHA; advanced knowledge of consensus standards, including NIOSH, ANSI, ASTM and NFPA standards., • 4-year occupational safety/health degree or engineering/science degree., • Thorough understanding of construction methods and federal, state, health and safety standards., • Demonstrated ability to interact with and provide H&S direction to management and field personnel., • Prior experience managing direct reports in a construction environment., • Outstanding interpersonal and communication skills., • CHST, CSP and/or CIH preferred., • Group health & welfare benefits including options for medical, dental and vision, • 100% Company Paid Benefits: Employee Life Insurance & Accidental Death & Dismemberment (AD&D), Spouse and Dependent Life & AD&D, Short Term Disability (STD), Long Term Disability (LTD), Employee Assistance Program and Health Advocate, • Voluntary benefits at discounted group rates for accidents, critical illness, and hospital indemnity, • Flexible Time Off Program (includes vacation and personal time), • Paid Sick and Safe Leave, • Paid Parental Leave Program, • 10 Paid Holidays, • 401(k) Plan (company matching contributions up to 4%)., • Employee Referral Program MWH Constructors is a global project delivery company in heavy civil construction with a focus on water and wastewater treatment infrastructure. With the ultimate goal of delivering maximum value to clients and their local communities, MWH Constructors provides single-source, integrated design and construction services through a full range of project delivery methods. Incorporating industry-leading preconstruction and construction services, the Company’s multi-disciplined team of engineering and construction professionals delivers a wide range of projects, including new facilities, infrastructure improvement and expansion, and capital construction services. Equal Opportunity Employer, including disabled and veterans. Please note that all positions require pre-employment screening, including drug and background check, as a condition of employment.

Job Description Entry Level Civil Engineer – Civil/Site Development The Civil/Site Development Group at GBA is looking for an entry level civil engineer to join our team at our office in Austin, Texas. The Civil/Site team provides site design and construction documents for a wide variety of commercial, industrial, municipal, and residential developments including mixed use, office, retail, multi and single family residential, warehouse/distribution, medical, and recreational facilities. Responsibilities: · Assist in the design and preparation of site engineering plans to include site plan layouts, site grading, storm drainage, water, utility, street and sanitary sewer design, and erosion control plans · Assist in coordination with project team, utility providers, contractors, and permitting authorities. · Perform design task required for effective and efficient delivery under the direction of senior engineer · Preparation of construction drawings and permit submittals · Assist with the collection and analysis of field data · Prepare and maintain technical reports Requirements: · BS in Civil Engineering or equivalent · 0-2 years of experience; previous internships for land/site development a plus · Adept at working on fast-paced projects · Experience using AutoCAD Civil 3D, HEC-HMS, Bluebeam and Microsoft Word and Excel software preferred · Possess effective communication skills, both written and oral · Self-motivated · Must be able to work effectively both on a team and individually It’s More Than Just A Job… At GBA, we are not your average engineering firm. We are about innovative people who want to solve problems. We’re known for our technical excellence, but we bring so much more to the table. We strive to create remarkable solutions for a higher quality of life. And we are changing the industry by integrating the design and construction process with use of new technology. Our people are ambitious, passionate and committed to creating high quality, imaginative projects. We’ve created an environment where we celebrate our team’s eagerness to learn and grow. From birthdays and BBQs to protecting the environment and helping families in need, GBA employees celebrate and support one another and the communities where we live, work and play. Joining our team means you’ll have rewarding opportunities that challenge and inspire you.

Job Description Founded in 1908, Flintco now employs more than 800 people in 8 cities serving clients in healthcare, education, hospitality, sports and industrial. Flintco also self-performs concrete, steel erection and excavation. Nothing matters more to us than the quality and growth of our people. Our teams are smart, humble and disciplined. Flintco is recognized for its commitment to safety and quality, using Lean principles as a guide to continuous improvement. The five guiding principles of our Ethos are: Safety, Integrity, Quality, Accountability and Honesty. We live it every day. Job Summary Responsible for planning coordinating and directing estimating functions for a particular geographic location or segment of the company. The position of Estimator II reports to the Preconstruction Manager/Director. Essential Duties and Responsibilities All duties and responsibilities include the following, however, other duties may be assigned. To perform in this position successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Coordinate, supervise and review work of assigned personnel to ensure accuracy and completeness., • Provide technical support and/or prepare estimates as required. Assist in making the "sale". Track awarded contracts as required. May include estimating/pricing extra work items, change orders, credit/cost savings, procuring materials, etc., • Assist Project Managers during preparation of inquiries and final evaluation of submitted bids and estimate as required., • Assists in the preparation of studies, materials and methods, recommendations, and relative cost estimates as required., • Ensure accuracy and completeness of estimates prepared by other employees temporarily assigned to estimating., • Support Bid Captain and/or Estimator on complex packages or as workload demands., • Participate in pre-bid meetings, bid strategy and presentation meetings as required., • Assist clients and designers in systems selections, budgeting, cost containment, value engineering. None Knowledge/Skills/Ability Thorough knowledge of company procedures, estimating techniques, all engineering disciplines, cost control systems and accounts required. Ability to estimate all types of projects/contracts, plus ability to coordinate group work effort. Education 4 Year engineering degree or an equivalent combination of education, technical training and related experience. Experience 4-8 years extensive construction industry and estimating experience or an equivalent combination of education, technical training and related experience. Certificates, Licenses, Registrations None Physical Requirements • Physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this position, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear., • The employee is occasionally required to sit and smell., • The employee must occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • Occasionally, especially when managing multiple projects and during problematic opening and/or closing phases of projects, mental stress can be taxing., • May be required to work long hours for extended periods of time.

Job Description Celebrating over 35 years of success and continual growth, ESP Associates is currently seeking a strategic, growth-oriented Land Development professional to join our leadership team. As the Texas Director, you will be responsible for overseeing managers within the Community Infrastructure Business Unit and land development projects. The Director will initially focus on expanding ESP’s services in the Central Texas (Austin / San Antonio) market with the opportunity to continue growth initiatives throughout Texas. As a leader, you will set the pace for ESP’s growth for the Community Infrastructure Business Unit in the Texas Land Development market and beyond! You will lead decisions regarding strategy, market penetration, team growth/development, and continuous improvement. Responsibilities: • The Director will be responsible for the Texas engineering, planning and landscape architecture groups by providing training, mentoring, technical and administrative guidance, and oversight., • Business Development: Develops and maintains relationships with current and prospective clients. Maintains a high public profile with our targeted client base, including participating as an active member in professional activities, societies and organizations., • Manage and oversee the managers and service lines within Texas locations of Community Infrastructure including private and public/municipal projects and operations, ensuring adherence to project specifications, safety standards, and quality control measures., • Leadership and Vision/Strategic Planning for Growth: Develops and maintains relationships with clients, key decision makers, as well as local municipalities, to increase Company exposure and position the Company for land development contracts., • Pursues, leads, and assists in preparing and approving proposals and qualifications statements. Projects may include but are not limited to public sector, higher education, parks & recreation, residential, multi-family developments, industrial, K-12 schools, mixed-use, and rezoning/entitlement projects., • Assist Division Manager(s) and Group Managers in Texas locations with workforce planning, monthly billing, and final review of completed reports and maps within the Community Infrastructure Business Unit., • Bachelor's degree in Civil Engineering, Landscape Architecture, or related degree., • Registered Professional Engineer (PE) in Texas, Professional Landscape Architect (PLA in Texas, or Certified Planner., • 20+ years of progressive experience and leadership in private land development and/or municipal/public projects., • Excellent interpersonal, leadership, and communication skills to effectively and professionally interact with team members, clients, governmental review authorities, government officials, and the public., • Demonstrated expertise adjusting to priorities and demands from multiple clients and projects in a fast-paced, deadline-driven, multi-disciplinary environment., • Firm understanding of risk management and loss prevention., • Strong leadership, project management, and business development skills., • Extensive knowledge of civil engineering and/or planning & landscape architecture principles, practice standards, procedures and project management., • Superior organizational and planning skills with keen attention to detail., • Candidate must be able to pass a drug screen, background check, and have a satisfactory driving record in accordance with the company’s driving (MVR) policy. Corporate Information: ESP is a multi-discipline engineering design and consulting firm providing our clients with civil engineering, surveying, planning/landscape architecture, geosciences, environmental, subsurface utility engineering, and construction engineering inspection. Through years of dedicated service to our clients, ESP has received a designation of 195 on the 2025 ENR Top 500 Design Firm rankings. For the firm's primary territory, the ENR Texas & Southeast Top Design Firms, ESP received a 2025 ranking of 52. ESP offers an excellent employee benefits package including: • Competitive compensation with yearly performance reviews and discretionary annual bonuses, • 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days), • PTO (Paid Time Off) & 10 Paid Holidays, • Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days), • Behavioral Medicine through Teladoc, • Short-Term Disability Insurance, • Long-Term Disability Insurance, • Life Insurance, • Pet Insurance, • Education Reimbursement Opportunities, • Flexible and Dependent Benefits Plan, • Referral Bonuses

Job Description ESP Associates, Inc. has an immediate opportunity for a Land Development Division Manager to support and grow our Community Infrastructure Business Unit in the Central Texas market. As a leader, you will contribute to setting the pace for ESP’s growth in the Central Texas (Austin / San Antonio) market and beyond! You will lead decisions regarding strategy, market penetration, team growth/development, and continuous improvement. We are excited to see how your leadership skills, experience, interests, and established local/regional connections will expand ESP’s presence in Texas in new and exciting directions! Reporting to the Community Infrastructure Engineering Director, the successful candidate will have an outgoing, can-do attitude to grow and develop staff while working closely with clients, engineers, and sub-consultants to ensure their needs are met. This will include leading business planning, marketing, meeting financial performance goals, and fulfillment of the firm’s strategy in Texas, as well as supporting the Community Infrastructure Business Unit from an overall perspective. Responsibilities: • Develops and maintains relationships with current and prospective clients. Maintains a high public profile with our targeted client base, including participating as an active member in civil and professional activities, societies and organizations., • Build, Grow & Lead a dedicated engineering team, including mentoring of staff and strategic growth of the division., • Manage and oversee all aspects of private and municipal projects and operations, ensuring adherence to project specifications, safety standards, and quality control measures., • Assists in preparing and approving proposals and qualifications statements and may assist with the management of plan production on projects. Projects may include but are not limited to commercial, residential, and multi-family developments, industrial, K-12 schools, mixed-use type projects, rezoning due diligence, public facilities, and other site development or utility projects., • Assist Managers with workforce planning, monthly billing, and final review of completed reports and maps., • PE licensure in Texas (or ability to obtain PE within 3 months of hire)., • Experience performing business development and maintaining relationships with public and private sector clients., • 10+ years of progressive experience and leadership in private land development and/or municipal infrastructure projects., • Excellent interpersonal, leadership, and communication skills to effectively and professionally interact with team members, clients, governmental review authorities, government officials, and the public., • Demonstrated expertise adjusting to priorities and demands from multiple clients and projects in a fast-paced, deadline-driven, multi-disciplinary environment., • Firm understanding of risk management and loss prevention., • Superior organizational and planning skills with keen attention to detail., • Extensive knowledge of civil engineering principles, practice standards, procedures and project management. ESP is a multi-discipline engineering design and consulting firm providing our clients with civil engineering, surveying, planning/landscape architecture, geosciences, environmental, subsurface utility engineering, and construction engineering inspection. Through years of dedicated service to our clients, ESP has received a designation of 195 on the 2025 ENR Top 500 Design Firm rankings. For the firm's primary territory, the ENR Texas & Southeast Top Design Firms, ESP received a 2025 ranking of 52. ESP offers an excellent employee benefits package including: • Competitive compensation with yearly performance reviews and discretionary annual bonuses, • 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days), • PTO (Paid Time Off) & 10 Paid Holidays, • Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days), • Behavioral Medicine through Teladoc, • Short-Term Disability Insurance, • Long-Term Disability Insurance, • Life Insurance, • Pet Insurance, • Education Reimbursement Opportunities, • Flexible and Dependent Benefits Plan, • Referral Bonuses

Job Description Job Summary Dennis Group Safety Managers assist in the development, management, and implementation of a Health and Safety Program for all of Dennis Group’s projects. Our projects are vertical, industrial construction projects involving multiple engineering disciplines and sub-contractor trades. Our safety professionals will be responsible for the safety practices of all personnel on our projects. This position requires knowledge of OSHA regulations, safety management, accident investigation and training in the construction industry. The professional will be a member of our safety department and his/her responsibilities will include, but not be limited to: Safety Responsibilities: • Assist in developing and implementing health and safety program., • Assist in developing, implementing, and coordinating health and safety training and activities., • Must be familiar with federal, state and local safety laws to ensure the organization complies with all current safety regulations., • Compile incident rate data on injuries, accidents, etc., • Prepare and deliver safety toolbox talks and safety training topics for contractors, • Prepare, implement and enforce Job Safety Analysis (JSA) and Activities Hazard Analysis (AHAs)., • Attend and prepare safety actions for pre-construction conferences, pre-work meetings including inspection meetings, and periodic in-progress project meetings., • Conduct and document Jobsite Safety Observations, • Review subcontractor safety pre-qualification submittal, • Work with Construction Managers and Sr Safety Managers to establish job site safety procedures and policies during initial project mobilization and as needed during the project., • May be required to act as full-time on-site safety coordinator for projects as required., • Review safety programs with client representatives and governmental agencies, • Review subcontractor safety pre-qualification submittal, • Researching construction safety best practices, • Support talent growth within the organization., • Educate and provide training and support to all levels of Dennis Group personnel on accident/injury prevention procedures., • Investigate accidents, determine “root causes”, and ensure corrective actions are implemented., • Bachelor’s degree in health and safety, risk management, or construction is required. Candidates that are enrolled in a Bachelor program in health and safety will be considered for internship opportunities., • 4-7 years of experience overseeing safety activities on construction projects., • 4-7 years of work experience in developing, implementing, and coordinating health and safety training and activities for construction projects, • 4-7 years of work experience in performing construction job site safety inspections and conducting special studies and investigations related to safety and health for the company, • OSHA training certifications and other professional certifications, • Ability to travel to job sites throughout North America as required. Travel is estimated to be 75%+, unless stationed on a jobsite (first 6 months of employment - training)., • Proficient in MS Windows, Outlook, Excel, Word, and PowerPoint, • Sound judgment and independent decision making required., • Prolonged periods sitting at a desk and working on a computer and prolonged periods of standing and walking around project site with uneven surfaces., • Must be able to traverse and inspect all areas of jobsite in all types of weather; this may include walking, climbing, reaching, bending, crawling, or stretching., • Exposure to characteristic construction site dangers., • Must be on-call to address delays, emergencies, bad weather, and other issues at the jobsite. We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Join the Origis Energy Team! Origis Energy is accelerating the transition to a carbon-free future by Reimagining ZeroSM. As one of America's leading renewable energy and decarbonization solution platforms, the company continues to expand and reimagine its contribution to the world's net-zero goals. Origis Energy puts customers first to deploy a wide range of sustainable solutions for grid power generation, performance optimization, and long-term operation of solar and energy storage plants across the U.S. Founded in 2008, Origis Energy is headquartered in Miami, FL. The Origis team, regarded as one of the leading developers in the U.S., is committed to living five core values in all interactions both with each other and external stakeholders: Solve for Tomorrow. A role with Origis Energy puts you at the forefront of the transition to clean energy. Are you ready to bring new ideas? Do you exist to find solutions? That's how we revolutionize energy and build a carbon-free future - through unmatched service and relentless innovation. Rise Together. To succeed here, you'll collaborate with others and work as one team, across various teams including solar and energy storage development, financing, engineering, procurement and construction (EPC) and operations, maintenance and asset management. Are you open to diverse perspectives and prepared to work seamlessly across disciplines to reach our collective goals? Perform at Peak. We're seeking team members who bring authentic energy and passion to every task. How can you use your natural strengths, genuine optimism and intelligence to make your greatest contributions to Origis? Inspire & Grow. The Origis team is comprised of knowledgeable, passionate solar and energy storage experts who bring deep expertise and solution-driven thinking to clients. A successful Origis team member encourages others and sets a high bar for growth. We have a culture of continuous improvement because each team member takes the role of both learner and mentor. Be Resilient. The spirit in which we tackle the energy challenges and objectives of our clients means we consistently stretch for the extra mile. We all take initiative and remain adaptable, overcoming obstacles by prioritizing respect. Position Description The Senior Data Engineer position, reporting to the Senior Business Systems Manager, will be responsible for design, build, and optimize our data infrastructure with a focus on Databricks, Python, and modern data engineering practices. This role will support data ingestion, transformation, and analytics across operational, financial, and production systems, enabling stakeholders to make informed decisions. Knowledge of JavaScript or front-end integration is a plus for enhancing reporting and user-facing tools. The Senior Data Engineer is a regular, full-time position, and is eligible for our generous employee benefits package, including employer paid health insurance, paid time off, a 401(k) plan with employer matching contributions, and other great benefits. Key Responsibilities • Develop, optimize, and maintain scalable data pipelines and ETL processes in Databricks., • Integrate data from diverse sources (plant SCADA systems, IoT devices, financial/ERP systems, market data, etc.)., • Write efficient, maintainable code in Python for data transformation, automation, and analytics., • Design and maintain Delta Lake, SQL-based transformations, and structured streaming workflows., • Implement data quality checks, monitoring, and governance to ensure accuracy and reliability., • Collaborate with data analysts, business stakeholders, and operations teams to deliver insights., • Support Power BI and other visualization platforms by preparing curated datasets., • Apply JavaScript to extend visualization capabilities or enhance web-based reporting tools., • Bachelor's or Master's in Computer Science, Data Engineering, or related field., • 3+ years of experience as a Data Engineer (preferably in energy, utilities, or industrial environments)., • Strong hands-on experience with Databricks (PySpark, Delta Lake, Delta Sharing, MLflow a plus)., • Proficiency in Python for data engineering and automation tasks., • Solid SQL skills for complex queries and data modeling., • Familiarity with cloud platforms (AWS, Azure, or GCP), especially in a data context., • Experience with CI/CD pipelines, Git, and Terraform for Databricks., • Familiarity with dbt, Airflow, or other orchestration tools., • Understanding of data privacy, security, and compliance principles (e.g., row-level security, encryption)., • Exposure to machine learning workflows and MLflow., • Occasional work during evenings/weekends for maintenance or upgrades. Location: Austin, TX - hybrid schedule (WFH Mon & Fri) Travel: N/A Job Level: Senior Engineer - no direct reports Origis Energy is an Equal Opportunity Employer (EOC). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. We are committed to fostering, cultivating and preserving a culture of diversity, equity and inclusion. We embrace and encourage our employees' differences as that is what makes our employees unique. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment. More information is available here. California Applicants: Please review our California Privacy Policy and Notice at Collection. Request for Support or Accommodations: As part of our effort to provide equal opportunity to qualified disabled veterans and individuals with disabilities, we are happy to offer support and special accommodations in order for you to successfully reach us with your interest. Please reach out to us at if you would like to request help with your application.

Construction Program Managers oversee the strategic planning, management, and execution of industrial construction projects of food and beverage production facilities, ensuring they are delivered on time, within budget, and to the highest quality standards, while also fostering strong client and sta

Construction Engineer ?? ???? Openings- Austin, TX Area. Generate RFIs, RFAs, construction plans, and progress reports for coordination with GC and client teams. Reinforced concrete (RC), steel structures, and interior finishing experience for commercial or industrial construction projects.

Job Description Phasor Engineering Inc is a subsidiary of Quanta Services, Inc which is the leading specialty contractor with the largest and highly trained skilled workforce in North America – providing fully integrated infrastructure solutions for the electric power, underground utility and communications industries. The Geomatics Division of Phasor Engineering provides the spatial services required to build, maintain, map and monitor electrical infrastructure. We apply the latest geomatics technology, including GPS systems, terrestrial scanners, drones, high precision optical and infrared sensors, as well as helicopter-based LiDAR. Our focus on power infrastructure projects has made us experts in the field. Phasor Geomatics’ team includes highly qualified engineers and technicians who have a wide range of experience on power infrastructure projects: large transmission line builds, renewable energy projects, remote inspections, pipeline projects and much more. We get to apply our knowledge daily and continuously develop innovative ways to improve efficiency and client values. Phasor’s Geomatics division is seeking Survey Crew Chief for long-term opportunities in Canada and the United States for work on larger scale construction projects. Key Details · Truck and equipment will be supplied · Travel and accommodations will be paid by Phasor · 20 days on, 10 day off rotation REQUIREMENTS · Perform daily field survey activities including obtaining survey measurements, staking for infrastructure construction · Communicate effectively and regularly with Field Leads, Project Managers, Professional Land Surveyors and Client Field Representatives · Interpret design drawings, field data, field sketches and base maps · Coordinate field crew’s daily activities and supervise, mentor and train survey assistants · Will be require to travel based on project location · Operate and maintain assigned survey equipment; ATVs/UTVs/Argos, Tools and Materials · Actively promote Phasor's Health, Safety and Environmental Program EDUCATION AND EXPERIENCE · Previous Survey experience in engineering, construction, or industrial surveys · Must have valid Driver’s License and maintain a “clean” driver’s record · Technical diploma in Geomatics or Civil Engineering is preferred BENEFITS · Competitive compensation · Comprehensive benefits coverage including health insurance, RRSP matching, vacation & personal days · Growth and advancement opportunities · Paid professional dues · Use of new leading-edge technology and equipment · Large scale engineering and construction projects and a fast-paced working environment About Us Phasor Engineering is an equal opportunity employer, committed to a diverse workforce. We offer a competitive salary and a complete range of employee benefits. Please forward resume and cover letter in confidence by applying directly to this job posting. We thank all applicants for their interest. All applications will be reviewed to determine which candidates' education and experience best meets the needs of the position. Only individuals selected for interviews will be contacted. Benefits • Dental care, • Disability insurance, • Employee assistance program, • Extended health care, • Life insurance, • On-site gym, • On-site parking, • Paid time off, • RRSP match, • Vision care, • Wellness program

Job Description Phasor Engineering Inc is a subsidiary of Quanta Services, Inc which is the leading specialty contractor with the largest and highly trained skilled workforce in North America – providing fully integrated infrastructure solutions for the electric power, underground utility and communications industries. The Geomatics Division of Phasor Engineering provides the spatial services required to build, maintain, map and monitor electrical infrastructure. We apply the latest geomatics technology, including GPS systems, terrestrial scanners, drones, high precision optical and infrared sensors, as well as helicopter-based LiDAR. Our focus on power infrastructure projects has made us experts in the field. Phasor Geomatics’ team includes highly qualified engineers and technicians who have a wide range of experience on power infrastructure projects: large transmission line builds, renewable energy projects, remote inspections, pipeline projects and much more. We get to apply our knowledge daily and continuously develop innovative ways to improve efficiency and client values. Phasor’s Geomatics division is seeking Survey Assistants for long-term opportunities in Canada and the United States for work on larger scale construction projects. Key Details: • Truck and equipment will be supplied, • Travel and accommodations will be paid by Phasor, • Perform daily field survey activities including obtaining survey measurements, staking for infrastructure construction, under the supervision of the Survey Crew Chief, • Communicate effectively and regularly with Survey Crew Chief, Field Leads, Project Managers, Professional Land Surveyors and Client Field Representatives, • Interpret design drawings, field data, field sketches and base maps, • Travel based on project location, • Operate and maintain assigned survey equipment; ATVs/UTVs/Argos, Tools and Materials, • Previous Survey experience in engineering, construction, or industrial surveys, • Must have valid Driver’s License and maintain a “clean” driver’s record, • Competitive compensation, • Comprehensive benefits coverage including health insurance, RRSP matching, vacation & personal days, • Growth and advancement opportunities, • Paid professional dues, • Use of new leading-edge technology and equipment Phasor Engineering is an equal opportunity employer, committed to a diverse workforce. We offer a competitive salary and a complete range of employee benefits. Please forward resume and cover letter in confidence by applying directly to this job posting. We thank all applicants for their interest. All applications will be reviewed to determine which candidates' education and experience best meets the needs of the position. Only individuals selected for interviews will be contacted. Benefits • Dental care, • Disability insurance, • Employee assistance program, • Extended health care, • Life insurance, • On-site parking, • Paid time off, • Vision care, • Wellness program

Job Description Are you passionate about helping customers succeed—not just “supporting” them, but empowering them to thrive? Do you thrive in a fast-moving, transparent environment where your ideas and impact matter? If you’re the kind of person who builds trust quickly, loves solving problems, and gets energized by helping clients realize real value through technology, this role is for you. Who We Are: SATISFYD is the go-to experience management platform for the equipment industry. For over 25 years, we’ve helped dealerships and manufacturers understand and act on what matters most—feedback from their customers and employees. We specialize in Voice of Customer (VoC), Reputation Management, and Voice of Employee (VoE) solutions—purpose-built for heavy equipment, agriculture, construction, and industrial brands. As the market evolves, we're laser-focused on scaling automation, deepening analytics, and helping our clients elevate service with smarter, AI-powered tools. This role isn’t about checklists and call logs—it’s about building relationships, solving meaningful business problems, and helping our clients unlock value from day one. About the Role: • Customer-First Culture: Everything we build—and every decision we make—starts with how we can better serve our clients. Your voice will shape what comes next., • Own the Onboarding Experience: You’ll own the onboarding strategy, streamline implementation, and become a trusted advisor to some of the biggest names in the equipment space., • Build Real Relationships: Our clients are long-term partners. You’ll work closely with them to understand their goals and help them succeed., • Autonomy + Flexibility: We don’t micromanage. You’ll set the tone, own your accounts, and have the freedom to work where and how you’re most effective. What You’ll Do: • Lead onboarding for new clients on our XperienceHub platform—from kickoff to go-live., • Educate and empower users with best practices, training, and insights that help them get maximum value., • Manage relationships across a mix of dealerships and manufacturers—guiding clients through configuration, adoption, and beyond., • Troubleshoot and solve problems quickly, looping in Support when needed but always owning the client experience., • Collaborate cross-functionally to relay client feedback and shape product enhancements., • Monitor account health and usage trends to proactively drive retention and renewals. What You Will Bring: • Relationship Builder: Your strong relationship skills will allow you to connect and build trust with new and existing clients., • Tech-Comfortable: Experience navigating SaaS platforms and explaining them to non-technical users. Bonus points if you’re familiar with HubSpot and Freshdesk., • Self-Starter: With flexibility, you’ll need to manage your time like a pro and stay a step ahead of client needs., • Communicator: You’re clear, concise, and persuasive—in emails, Teams, and one-on-ones., • Process-Oriented but Flexible: You love repeatable systems but aren’t afraid to initiate change and adapt. Why Join Us? • Remote-First Flexibility: Work from wherever you’re most productive, • No Red Tape: We move quickly and cut the fluff, • Make Your Mark: Your voice and ideas matter—directly shape how we grow, • Customer-Centric Culture: We prioritize long-term success and client trust over shortcuts, • Career Growth: As we scale, you’ll have room to expand into leadership or specialization, • Minimum of 3 years of experience in customer success, account management, or a related field., • Bachelor’s degree in Business, Marketing, or a related area., • Strong communication and interpersonal skills, with the ability to build rapport with clients., • Proven experience in working with customer and driving high levels of satisfaction., • Strong problem-solving skills and the ability to think critically., • Self-motivated, adaptable, and able to work effectively in a remote environment., • Experience with CRM software and customer engagement platforms, knowledge of HubSpot is a plus., • Ability to analyze data and present insights in a clear and compelling manner., • Experience in the B2B sector or technology industry is a plus., • Health Care Plan (Medical and Dental), • Retirement Plan (IRA), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Training & Development, • Work From Home Salary Range $60K - $80K USD

Fast growing general contractor in Austin area, with a strong presence in the Commercial sector with an emphasis on K12.The GC is equipped to handle real estate investment, development and construction of manufacturing facilities, industrial spaces, shopping centers, office spaces and much more.The

Job DescriptionHOSPITAL COOK We are seeking a dedicated and skilled Hospital Cook to join our Nutrition Services team. This role is essential in providing high-quality, nutritious meals to patients, staff, and visitors in accordance with dietary guidelines and food safety standards. The ideal candidate is passionate about cooking, thrives in a fast-paced environment, and understands the importance of food in patient recovery and wellness. Responsibilities • Prepare and cook meals according to standardized recipes and dietary requirements., • Maintain cleanliness and sanitation of kitchen equipment, workstations, and food storage areas., • Slice and dice food for preparation., • Stock food and maintain inventory., • Assist with menu planning and contribute ideas for improving food quality and variety., • Support catering for hospital events and special functions when required., • Minimum 1–2 years of cooking experience in a healthcare, institutional, or commercial kitchen setting., • Knowledge of therapeutic diets and food safety regulations., • Ability to read and follow recipes, production sheets, and dietary guidelines., • Strong organizational and time management skills., • Excellent communication and teamwork abilities. Experience the rewarding nature of working in a hospital setting where professionalism and customer service are highly valued. Benefit from a supportive work environment that encourages growth and excellence. Work Environment • Fast-paced kitchen environment within a healthcare facility., • Exposure to hot surfaces, sharp tools, and cleaning chemicals. This is a Contract to Hire position based out of Austin, Texas. Pay and Benefits The pay range for this position is $15.75 - $18.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Austin,TX. Application Deadline This position is anticipated to close on Oct 24, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Construction Management Intern (Summer 2026). We have grown from a Carolinas-based rigging company into the leading provider of rigging services, turn-key industrial construction and plant maintenance services in the Southeast. Construction Management Interns for our summer 2026 program.

Construction Engineer Openings- Austin, TX Area. Generate RFIs, RFAs, construction plans, and progress reports for coordination with GC and client teams. Reinforced concrete (RC), steel structures, and interior finishing experience for commercial or industrial construction projects.

About Samsung Austin Semiconductor Samsung is a world leader in advanced semiconductor technology, founded on the belief that the pursuit of excellence creates a better world. At SAS, we are Innovating Today to Power the Devices of Tomorrow. Come innovate with us! Position Summary Quality Assurance Professional is responsible for Infra Technology Construction (ITC) Quality control management program for multi-billion industrial manufacturing construction project. Ensure ITC Quality Control Program design and construction complies with the requirements of applicable codes, drawings and specifications. Oversee Mechanical Quality performance of General Contractors through a comprehensive policy to ensure all Quality documentation, reporting, and work is measured against a defined metrics. Role and Responsibilities Here's What You'll be Responsible For: • Manage and drive field coordinators performing regular site field observations for implementation of best quality practices and field quality improvements., • Manage Design Consultants and General Contractor compliances needed for Mechanical systems as required by the authorities having jurisdiction, codes, and specifications., • Review, update, and standardize project quality processes and procedures for future project phases., • Lead failure analysis reviews through systematic implementation, drive the correction action response initiative to ensure timely and pertinent responses., • Managing quality index for contractor and subcontractor work while leading a multi-cultural team of contract construction staff., • Identifying, tracking, managing, resolving, and communicating project quality issues during all phases of project-related work. Shift: 1st Shift Skills and Qualifications Here's What You'll Bring to Samsung: • +8 years in Quality Assurance, with emphasis on inspection and construction management, • Experience in industrial, manufacturing and/or semiconductor industrial is preferred., • Understanding of basic construction with emphasis on piping, welding, tanks, boilers, and HVAC is required., • Bachelor's degree is a plus Knowledge, Skills, Abilities, Software, and Tools • Strong data analysis, troubleshooting, teamwork, and communication skills., • Ability to thrive in a high-paced multi-cultural environment., • Ability to identify gaps and create/modify processes and procedures in accordance with Samsung requirements and/or any relevant Code requirements., • Strong creative problem solving skills, leadership potential, and a desire to contribute to leading-edge planning and optimize project with aggressive goals and timelines., • Aptitude for documentation and data analysis using MS Office programs, including Project, Excel, Word, and Power Point. NOTE: This position is required to be on-site full time #LI-NF1 The current base salary range for this role is between $81,490.00 -$157,880.00 Individual base pay rates will depend on factors including duties, work location, education, skills, qualifications and experience. Total compensation for this position will include a competitive benefits package and may include participation in company incentive compensation programs, which are based on factors to include organizational and individual performance. Total Rewards At Samsung SAS, base pay is just one part of our total compensation package. The base compensation for this role will depend on education, experience, skills, and location. We offer a comprehensive benefits package, including: \n • Medical, dental, and vision insurance\n, • Life insurance and 401(k) matching with immediate vesting\n, • Onsite café(s) and workout facilities\n, • Paid maternity and paternity leave\n, • Paid time off (PTO) + 2 personal holidays and 10 regular holidays\n All positions at SAS are full-time on-site. U.S. Export Control Compliance This role requires access to information subject to U.S. export control laws. Applicants must be authorized to access such information or eligible for government authorization. Trade Secrets Notice By submitting an application, you agree not to disclose to Samsung-or encourage Samsung to use-any confidential or proprietary information (including trade secrets) belonging to a current or former employer or other entity. • Please visit Samsung membership to see Privacy Policy, which defaults according to your location. You can change Country/Language at the bottom of the page. If you are European Economic Resident, please click here., • Samsung Electronics America, Inc. and its subsidiaries are committed to employing a diverse workforce, and provide Equal Employment Opportunity for all individuals regardless of race, color, religion, gender, age, national origin, marital status, sexual orientation, gender identity, status as a protected veteran, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law.

Job Description Founded in 1908, Flintco now employs more than 750 people in 10 cities serving clients in healthcare, renewable energy, education, hospitality, sports and industrial. Flintco also self-performs concrete, steel erection and excavation. Nothing matters more to us than the quality and growth of our people. Our teams are smart, humble and disciplined. Flintco is recognized for its commitment to safety and quality, using Lean principles as a guide to continuous improvement. The five guiding principles of our Ethos are: Safety, Integrity, Quality, Accountability and Honesty. We live it every day. Job Summary Responsible for determining, marking and maintaining horizontal and vertical control of a project, and assisting in supervision of subcontractor’s work as assigned. Other positions which may report to a Surveyor: Carpenter or Apprentice, to assist in layout. Essential Duties and Responsibilities All duties and responsibilities include the following, however, other duties may be assigned. To perform in this position successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Study and analyze construction drawings to confirm or otherwise establish the planned layout dimensions and elevations for the project., • Inform Superintendent of any variations in the project dimensions and elevations, and assist company and subcontractor personnel to (1) understand the layout, and (2) identify the precise locations of the elements being installed., • Survey, verify and mark actual lines and elevations to provide visual benchmarks for the elements being installed by using measuring tape, electronic distance measuring devices, theodolites, and total station instruments., • Measure dimensions and elevations of installed work, marking As-Built Drawings to indicate actual dimensions and elevations, using measuring devices, theodolites, and total station instruments., • Other functions as may be required or assigned by Project Superintendent or other authorized individual, including making suggestions of alternative construction methods and techniques, and/or developing interpretations of vague or conflicting information, etc. Management Responsibilities None Knowledge/Skills/Ability Working knowledge of Geometry, Trigonometry, Algebraic formulas and ability to apply those formulas, and perform mathematic calculations to determine lines, grades, points and elevations. Ability to work within precise standards of accuracy. Skill to use transit, level, measuring tape and conventional surveying tools. Knowledge of standard surveying practices. Knowledge of typical construction techniques and applications. Skill in comparing and assessing differences in size, shape and form of lines, figures, and objects. Skill in observing two dimensional drawings or pictures and understanding how they will look in three dimensions as solid objects. Ability to read and interpret construction documents. Education High School Degree or vocational training or an equivalent combination of education, technical training and experience. Job Location Florence, Texas Experience Adequate experience in layout and surveying or an equivalent combination of education and experience. Certificates, Licenses, Registrations Physical Requirements • Physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this position, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear., • The employee is occasionally required to sit and smell., • The employee must occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • Occasionally, especially when managing multiple projects and during problematic opening and/or closing phases of projects, mental stress can be taxing., • May be required to work long hours for extended periods of time., • Observing (seeing well, either naturally or with correction), as in reading detailed blueprints, drawings, sketches and plans at close proximity., • Seeing and observing at a distance as in making visual assessments of the exact location of a marker when viewed through a surveyor’s instrument. Special Job Dimensions The office provides a safe and healthy work environment, is adequately heated and cooled, is free from exposure and extreme conditions, has appropriate lighting and office furnishings, and is smoke-free and drug-free. While performing the duties of this position in the fabrication shop, warehouse, maintenance shop or at a project site, the employee could be regularly exposed to any number of the following, including, but not limited to: moving mechanical parts; moving machinery; high, precarious places (including, but not limited to, being raised several hundred feet in a bucket); close tight quarters; rough and sloped terrain; fumes or airborne particles; drilling and blasting activities; welding activities; toxic or caustic chemicals; the potential of falling rock; and outside weather conditions. The employee may be occasionally exposed to risk of electrical shock and vibration. The noise level in the work environment is generally loud. • NOTE – Where allowed, employees who work in positions classified as “safety-sensitive” can be disciplined if they test positive for marijuana or its metabolites, even if they have a valid state medical marijuana license. In addition, Flintco may also refuse to hire applicants for safety-sensitive jobs who test positive for marijuana as part of a pre-employment drug test, even if those applicants can produce a valid medical marijuana patient license.

Job Description Electrical Consultants, Inc., a leading power engineering consultant firm, has immediate openings for a project surveyor in Austin, TX. ECI specializes in engineering services to electric utilities (substation, protection, transmission) alternative energy systems, communication, oil/gas, mining and heavy industry. Responsibilities include but are not limited to: • Serving as independent functioning Survey Field Crew Chief., • Calculating survey staking points from engineering and construction drawings and specifications., • Utilizing AutoCAD or Microstation to convert field data into deliverables to be used during the design process., • Interpreting historical survey data, property deeds and other title information, along with other evidence to establish parcel boundary lines and landnets to be used in design and easement creation., • Utilizing survey data collectors to operate survey instrumentation for collecting data for platmaking, construction, land and other surveys. Salary commensurate with experience and education. Benefits include: • Medical, dental and vision insurance, • Flexible spending account, • Health savings account, • Life insurance, • Disability insurance, • 401(k), profit sharing and employee stock ownership plan, • Paid vacation, personal days and holidays, • Paid Parental Leave An Equal Opportunity Employer Job Posted by ApplicantPro

Job Description We have partnered with one of the largest mechanical construction contractors in the world to identity a Vice President of Preconstruction Services to be based out of Austin, Texas. The VP of Preconstruction Services will oversee preconstruction efforts for mechanical and plumbing services. This role is essential in ensuring that projects are thoroughly planned, cost-effective, and aligned with our mission to deliver high-quality solutions with full transparency. Duties and Responsibilities: • Uphold integrity by ensuring accurate cost estimations and ethical decision-making., • Demonstrate discipline in managing preconstruction processes, deadlines, and budget control., • Promote transparency by fostering open communication with project teams, subcontractors, and stakeholders., • Manage team to produce detailed quantity takeoffs and cost analyses for mechanical, plumbing, and process piping systems., • Lead constructability analyses, value engineering efforts, and scope reviews to optimize project efficiency while providing value to our customers., • Develop and manage RFIs to provide clear and precise project clarifications., • Collaborate with suppliers and subcontractors to ensure competitive pricing and industry compliance., • Manage the utilization of estimating software to track and manage subcontractor and material costs effectively., • Mentor preconstruction team members, fostering a culture of accountability and excellence., • Build and maintain customer relationships., • Create detailed bid proposals., • Create Power Point presentations for project interviews., • Take lead in collaborating with key Operations personnel in preparation for project interviews., • Experience: 10+ years in mechanical and plumbing preconstruction, estimating, or related roles., • Education: Bachelor's degree in Mechanical Engineering, Construction Management, or a related field preferred., • Technical Skills: Proficiency in estimating software, Microsoft Office Suite, and construction management tools., • Leadership: Strong ability to lead teams, communicate openly, and manage multiple projects with precision., • Industry Knowledge: Expertise in mechanical and plumbing systems for large-scale projects such as industrial, commercial, and institutional buildings., • Experience with Trimble on-screen takeoff software., • Knowledge of data center, semiconductor, and healthcare facilities., • Strong negotiation and problem-solving skills that align with our core values.

Job Description Thompson Engineering is looking for qualified Construction Materials Testing (CMT) Technicians for various locations. This position is responsible for the daily oversight of the construction materials testing and inspection on construction sites to ensure specified standards of quality are met. Preferred candidates would need to be open to travel to various jobs sites and locations as required. DUTIES 1. Utilize a 40 lb. nuclear gauge to run tests on construction materials, 2. Obtain concrete samples from the ready mix trucks, 3. Make concrete test cylinders, 4. Run tests on concrete samples and deliver the samples to the laboratory, 5. Observe and record construction crew performance data for related activities, 6. Perform visual inspection of rebar, 7. Obtain and deliver soil samples from the jobsite to the laboratory, 8. Interact with clients and contractors in a professional and ethical manner 10.Ensure that standards for quality and quantity of work are implemented on all work assignment 11.Establish and maintain a daily diary of all field activities for each project 12.Submit daily reports and other documentation to the Team Leader as required by project specifications and/or applicable criteria 13.Perform all tasks assigned in a professional and ethical manner and according to company policies and procedures 14.Report to the Team Leader corrective actions (when necessary) to best ensure that the quality of work is maintained and meets company standards 15.Follow all written procedures for work being performed 16.Proactively review all project documents and testing procedures, and exhibit comprehension for the technical requirements and procedures necessary to perform the assigned work 17.Prepare reports and perform field activities in a timely manner Other Responsibilities 1. Establish personal goals for improving job performance, 2. Ensures on time and regular attendance, 4. Other duties as required QUALIFICATIONS Minimum Requirements 1. High school diploma or equivalent, 2. Six (6) months of experience in construction material testing, 3. ACI Level I Certification (must be able to obtain), 4. Nuclear Gauge Certification, 5. Communicate effectively with others written and verbally, 6. Valid driver's license, 7. Ability to read and write in English, 8. Preferred candidates will demonstrate flexibility and a willingness to travel to various job sites and locations as required, 9. Level and compensation will be commensurate with experience. Physical Requirements 2. Ability to lift and carry a minimum of 50 lbs., 3. Drive a company vehicle in a safe manner, 4. Pull or push 400 lbs. in a wheelbarrow, 5. Walk, stoop, bend, and climb up and down stairs and ladders, 7. Work in high grounds and high open buildings, 8. Work for extended periods outside in the heat and cold, 9. Ability to wear appropriate PPE for hazardous materials About Thompson Engineering Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, construction inspection, and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. While we are still one of the first companies on project sites conducting environmental assessments, land surveys, and geotechnical studies, our design teams are close behind. We now deliver cutting-edge solutions to complex infrastructure and building requirements. And our project management and construction management services mean we are often one of the last teams to leave. From start to finish, we are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Nelson Forensics, LLC is a progressive, multi-disciplined consulting firm, dedicated to providing world-class responsiveness and expert solutions to a complex array of forensic problems. Nelson Forensics has built a rock-solid reputation for providing detailed and fact-based investigations for property owners, for the insurance industry, and in the legal arena. Nelson Forensics' highly skilled investigators assess the cause and extent of damage from perils such as hurricanes, tornadoes, earthquakes, explosions, fires, windstorms, hail, structural failures, design defects, and construction defects. Nelson Forensics continues to grow as a national firm and is actively seeking exceptional talent to add to its team of experts. For detailed information regarding Nelson Forensics, visit . Nelson Forensics' Mission: We provide exceptional responsiveness to our clients; We provide trusted, ethical, qualified, and properly licensed professionals for each assignment; We deliver fact-based, defensible answers to our clients' questions based upon thorough application of the scientific method; We deliver credible, dependable, and defensible results in a timely manner. We are an Equal Opportunity Employer offering competitive pay and benefits and a flexible, yet professional, work environment. We value our employees, encourage teamwork and continuous professional development, and reward exceptional service. Position Objective: Nelson Forensics is seeking to add qualified, confident, personable, and communicative Architects to its team of experts. The qualified candidate will conduct forensic investigations in accordance with the scientific method, utilizing detailed field investigation techniques and command of core construction principles. The position affords the candidate experience with a wide breadth of project types, varying in size, duration, and complexity; while providing the opportunity to develop depth in personally desired areas of expertise. Candidates must possess excellent written and verbal communication skills. Position Responsibilities: Conduct investigations to determine the cause and origin of failures, damages, and defects for residential, commercial, institutional, and industrial buildings due to a wide range of perils; Prepare scopes for remediation and/or design documents for repair of existing structures; Perform evaluations of existing buildings and review construction documents for new buildings to determine code conformance (IBC, IECC, handicap codes, etc.); Review information to investigate the standards of care pertaining to various participants during the design and construction of building projects; Prepare clear, concise, cohesive, accurate, and defensible reports; Communicate regularly and directly with a variety of clients; Manage concurrent projects with varying sizes, scopes, client types, and durations; Provide deposition, mediation, arbitration and/or trial testimony. Position Requirements: Strong command of fundamental building envelope principles, such as role of the water resistant barrier, proper window/door flashing, proper roof/wall flashing, etc.; Working knowledge of building codes and ability to conduct independent research of codes, standards, and other technical references; Knowledge or experience with the creation of construction documents, contracts, ASI's, RFI's, Contractor Request for Payments, punch lists, Substantial Completion forms, etc.; An understanding of the roles and responsibilities of the various participants in the construction process; including the architect, the contractor, the consultants, the subcontractors, etc.; Strong analytical skills and the desire and ability to tackle complex problems; The ability to clearly communicate architectural issues, verbally and in writing, to audiences with varying technical proficiency; Desire and ability to multi-task; Prompt responsiveness to inquiries from peers and clients, sometimes outside of normal working hours; Flexibility with respect to work schedule and travel. Travel is a requirement of the position, occasionally with little advance notice; Desire to continually develop and refine technical knowledge through targeted continuing education. Education & Experience: Bachelor of Architecture degree required; Master of Architecture a plus; Five to ten years of architectural design experience preferred; candidates with less will be considered; Active architectural license acquired by the ARE required; NCARB accreditation desired.

Nelson Forensics, LLC is a progressive, multi-disciplined consulting firm, dedicated to providing world-class responsiveness and expert solutions to a complex array of forensic problems. Nelson Forensics has built a rock-solid reputation for providing detailed and fact-based investigations for property owners, for the insurance industry, and in the legal arena. Nelson Forensics' highly skilled investigators assess the cause and extent of damage from perils such as hurricanes, tornadoes, earthquakes, explosions, fires, windstorms, hail, structural failures, design defects, and construction defects. Nelson Forensics continues to grow as a national firm and is actively seeking exceptional talent to add to its team of experts. For detailed information regarding Nelson Forensics, visit . Nelson Forensics' Mission: We provide exceptional responsiveness to our clients; We provide trusted, ethical, qualified, and properly licensed professionals for each assignment; We deliver fact-based, defensible answers to our clients' questions based upon thorough application of the scientific method; We deliver credible, dependable, and defensible results in a timely manner. We are an Equal Opportunity Employer offering competitive pay and benefits and a flexible, yet professional, work environment. We value our employees, encourage teamwork and continuous professional development, and reward exceptional service. Position Objective: Nelson Forensics is seeking to add qualified, confident, personable, and communicative Civil/Structural Engineers to its team of experts. The qualified candidate will conduct forensic investigations in accordance with the scientific method, utilizing detailed field investigation techniques and command of core engineering principles. The position affords the candidate experience with a wide breadth of project types, varying in size, duration, and complexity; while providing the opportunity to develop depth in personally desired areas of expertise. Candidates must possess excellent written and verbal communication skills. Position Responsibilities: Conduct investigations to determine the cause and origin of structural collapses, failures, damages, and defects for residential, commercial, institutional, and industrial structures due to a wide range of perils; Prepare scopes for remediation and/or design documents for repair and/or strengthening of existing structures; Prepare clear, concise, cohesive, accurate, and defensible reports; Communicate regularly and directly with a variety of clients; Manage concurrent projects with varying sizes, scopes, client types, and durations; Provide deposition, mediation, arbitration and/or trial testimony. Position Requirements: Strong command of fundamental structural engineering principles; Strong analytical skills and the desire and ability to tackle complex problems; Working knowledge of building codes and ability to conduct independent research of codes, standards, and other technical references; The ability to clearly communicate engineering principles, verbally and in writing, to audiences with varying technical proficiency; Desire and ability to multi-task; Prompt responsiveness to inquiries from peers and clients, sometimes outside of normal working hours; Flexibility with respect to work schedule and travel. Travel is a requirement of the position, occasionally with little advance notice; Desire to continually develop and refine technical knowledge through targeted continuing education. Education & Experience: Bachelor’s degree in civil or structural engineering required; Master's degree or Ph.D. in civil or structural engineering a plus; Five to ten years of structural design experience preferred; candidates with less will be considered; Active Professional Engineering (P.E.) license acquired by examination is required; NCEES record desired; Completion of the 16 hour NCEES Structural exam a plus.

Position Description Job Summary: The GPR Analyst is responsible for performing nondestructive testing services using Ground Penetrating Radar (GPR) and other scanning technologies to identify embedded objects in concrete or subsurface materials. This position plays a critical role in providing accurate and timely scanning results to support safe construction and cutting operations. The GPR Analyst ensures all field work is performed in accordance with safety standards, client expectations, and company protocols. Duties and Responsibilities: • Operate GPR equipment to perform scanning services on commercial, industrial, and infrastructure job sites. • Analyze scan data in real-time to locate rebar, conduits, post-tension cables, and voids in concrete or underground. • Locating underground utilities. • Travel for training and service support. • Accurately mark scanned areas in accordance with Penhall’s Standard Marking Protocol. • Complete thorough field documentation, including field reports, sketches, and photos. • Obtain required client signatures and ensure all service tickets are completed accurately and in a timely manner. • Communicate clearly with customers to explain results, safety considerations, and next steps. • Perform pre- and post-job inspections of equipment, and report any malfunctions. • Maintain a safe and clean work environment at all times. • Attend all required branch safety meetings and training sessions. • Check in daily with dispatch or supervisor to receive and confirm job assignments. • Transport and properly secure all tools and equipment necessary for daily field operations. • Assist in training new analysts when needed. • Other duties as assigned by your manager. Position Requirements Required Skills and Abilities: • Ability to interpret GPR scan results accurately in the field • Strong problem-solving skills and situational awareness • Excellent customer service and communication skills • Detail-oriented with the ability to maintain accurate field records • Comfortable using handheld tools, ladders, and navigating active job sites • Capable of working independently and in small teams • Familiarity with smartphone apps and digital documentation • Knowledge of safety practices in construction or industrial environments Essential Core Competencies: • Technical Accuracy: Delivers precise readings and interpretations of subsurface materials • Customer Focus: Demonstrates professionalism and courtesy when interacting with clients • Accountability: Follows standard procedures and completes assignments reliably • Safety Conscious: Follows all safety procedures and proactively identifies risks • Adaptability: Adjusts to different job environments and client needs quickly • Time Management: Arrives on time and completes jobs efficiently • Teamwork: Supports peers and contributes to a collaborative work culture • Communication: Clearly shares job information with team members and clients Education and Experience: • High school diploma or equivalent required • Technical training in GPR, NDT, or construction scanning preferred • Prior experience with GPR, X-ray, utility locating or concrete scanning services a plus • OSHA 10-hour or 30-hour certification preferred (can be obtained upon hire) Physical and Additional Requirements: • Ability to lift and carry up to 50 pounds • Frequent standing, walking, bending, and kneeling on job sites • Comfortable working in construction zones, both indoors and outdoors • Ability to drive to various job locations with equipment as needed Position Instructions Penhall Company has been shaping the future of concrete services for over 65 years. As the nation’s leader in concrete cutting, coring, scanning, and demolition, and ranked 3rd in Demolition by ENR's 2023 Top Specialty Contractors, we deliver more than just expertise—we deliver results. With safety at the core of our operations and state-of-the-art technology in our hands, we ensure every project is executed with precision, efficiency, and care. Equal Opportunity Information Legal Disclaimer: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Penhall Company is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, compensation inquiries, discussions or disclosures, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. (41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a)) This job description is intended to describe the general nature and level of work being performed by employees in this position. It is not intended to be an exhaustive list of all duties, responsibilities, or qualifications required. Penhall Company reserves the right to modify, add, or remove duties and to assign other responsibilities as necessary.

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. General Foreman The General Foreman is responsible for Rosendin; managing the labor, materials and production for electrical construction projects. Provide technical expertise in installing and troubleshooting electrical wiring and equipment. Work cooperatively with the general contractor and/or customer in managing the project, project schedule and employees. Monitor installations and ensure work is performed according Rosendin standards and project specifications. Rosendin is gearing up for a large-scale multi-year hospital project. Experience managing hospital projects is strongly preferred for this role. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Responsible for supervision of all field production activities; provide assistance to the Foreman in planning the job, ordering materials and manpower. * Work with appropriate Project Managers and Superintendents to establish project goals at the beginning of the project and monitor success in reaching those objectives on an ongoing basis. * Review and monitor labor efficiencies, hours and ratios. Project the labor needs for the duration of the project * Monitor codes and specifications, installation methods. * Prepare, review, distribute and/or maintain all required installation documentation. * Provide leadership and guidance to Foremen. * Work with the appropriate Project Managers and Superintendents to track and monitor material costs, storage, consumed and ordered to identify potential problems while minimizing cost and overruns to Rosendin * Achieve Rosendin productivity objectives by effectively managing and assigning tasks to crew members, while maintaining an accurate labor tracking log and communicating with other key project personnel * Utilize a proactive approach to anticipate and resolve potential issues. * Ensure the proper safety equipment, materials and tools are onsite to perform required work. * Maintain complete and accurate "as-builts" as per Rosendin procedures and project requirements. * Communicate effectively with a wide range of individuals including project owners, architects, general contractors, management, crew members, etc. * Adhere to project contract document changes and Rosendin change order notice-to-proceed policies. * Adhere to all Rosendin, state and federal safety policies and procedures. * Ensure all work performed meets with NEC, federal, state, county, local codes and contract documents. SKILLS AND EXPERIENCE: * TX TDLR Journeyman or Master's License * A minimum of three to five years of experience working as an Electrical Foreman/General Foreman or in a similar role in electrical construction, design and cost management for commercial or industrial projects. * Experience leading large-scale hospital projects in preferred. * Advanced abilities in reading and interpreting electrical plans and specifications with in-depth knowledge of the NFPA codes. * Demonstrated track record of successful project leadership with experience managing sub-Foremen. * Capable of managing any type of private or public sector electrical construction project including new construction, tenant improvements, etc. * Solid understanding of the electrical codes and installation methods. * Well-versed in the installation of power systems: lighting, fire protection, security and data networks. * Knowledgeable regarding the build, installation and maintenance of control panels * Comfortable utilizing Electrical Single Line blueprints. * Experience in verifying the compliance and functionality of installations. * Knowledgeable in the identification and repair of faults in electrical apparatus and circuits. * Demonstrated ability to effectively order and track materials, perform cost projections and develop "as-builts". * Strong knowledge and experience related to scheduling, material lead times, product knowledge and installation durations. PHYSICAL DEMANDS AND WORK ENVIRONMENT: This section reflects the physical demands and work environment that most people working in this occupation engage in during the course of a workday. However, these occupations often can be performed by those with disabilities and appropriate adaptations. Physical Demands: The employee may require the ability to do the following: * Perform ladder climbing, wire pulling and conduit pulling. * Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis * Maintain a standing position for long periods of time while performing repetitive actions such as grasping or manipulating wires. * Work off of ladders, man lifts or reach booms. * Lift 50 lbs. from ground and pull 50 lbs. of force * Must have use of feet, legs, hands and arms to climb and/or balance on scaffolding or ladders * Must have use of arms, hands and fingers to reach, handle and feel cable, wires, tools and other equipment * Must be able to work off of ladders, man lifts, or reach booms without fear of heights. * Must be able to see and hear, or have corrected vision, both close and distant, and hearing * Must be able to distinguish color coded wires * Must be able to adjust vision focus and use peripheral vision and depth perception. Working Environment: While performing duties of this job, the employee may be exposed to: * A variety of weather conditions including cold, snow, rain, heat, etc. * High noise levels * Work is sometimes noisy, cramped, and dirty * Hazards include risk of electrical shock and other work-site accidents * 40-hour workweek is normal, however, if offered, working overtime may be included; electricians may work nights or weekends Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description With over 18 years of experience and hundreds of million-dollar projects completed, Hays Electrical Services provides excellent service to customers in industries hospitality, commercial and solar. Hays Electrical Services approaches each project with a cooperative mindset, working with business owners, contractors, and subcontractors towards the common goal – successful project delivery. Position Overview: The Electrical Superintendent is responsible for overseeing the day-to-day operations of electrical construction projects, ensuring they are completed safely, on time, within budget, and to the highest quality standards. This role involves supervising field crews, managing project schedules, coordinating with subcontractors and suppliers, and ensuring compliance with safety regulations and project specifications. The Superintendent serves as the primary on-site leader, providing guidance, troubleshooting issues, and ensuring the project progresses smoothly and efficiently from start to finish. Key Responsibilities: · Project Oversight & Management: Supervise and manage the daily activities on electrical construction projects, ensuring that all electrical work is completed according to project specifications, within established timelines, and in compliance with local codes and safety standards. · Team Supervision: Lead and manage electrical crews, assigning tasks, providing guidance, and ensuring that all team members follow safety protocols and work efficiently. Monitor crew performance, provide training, and motivate team members to meet project goals. · Scheduling & Coordination: Develop and maintain detailed project schedules in coordination with project managers, ensuring that work is completed on time and in alignment with the overall project plan. Coordinate work with other trades and subcontractors to minimize delays or conflicts. · Quality Control: Monitor the quality of work performed, ensuring it meets company standards, industry regulations, and client expectations. Conduct regular inspections and address any deficiencies immediately to maintain the highest quality and workmanship on the project. · Safety Compliance: Ensure that all work is performed in accordance with OSHA guidelines and company safety policies. Conduct regular safety meetings and inspections, identify hazards, and implement corrective measures to ensure a safe work environment for all crew members. · Material & Equipment Management: Ensure that all necessary materials, tools, and equipment are available and properly maintained on the job site. Track inventory, coordinate with procurement teams for deliveries, and manage any material shortages to prevent work stoppages. · Budget & Cost Control: Monitor project costs to ensure that the electrical work stays within the budget. Work with the project manager to address any cost overruns, manage labor costs, and identify cost-saving opportunities without compromising quality or safety. · Client & Stakeholder Communication: Serve as the primary point of contact for clients, project managers, and other stakeholders on the job site. Communicate project status, any issues or delays, and ensure that client expectations are met. Address and resolve any client concerns on-site. · Problem Solving & Troubleshooting: Identify and resolve any issues or obstacles that arise on the job site, such as design discrepancies, unforeseen conditions, or resource shortages. Work with the project manager and other stakeholders to find effective solutions. · Documentation & Reporting: Maintain accurate records of daily activities, including work performed, materials used, manpower hours, and any issues encountered. Submit regular progress reports to the project manager and keep detailed logs for project tracking and future reference. · Project Close-Out: Ensure that all electrical work is completed according to project specifications and that the job is ready for final inspection. Assist with the preparation of as-built drawings, warranty documentation, and any other necessary close-out documentation for the client. Qualifications: · High school diploma or equivalent (required). An associate’s degree or certification in construction management or electrical technology is preferred. · 5+ years of experience as a superintendent, foreman, or similar role in electrical contracting, with experience managing large-scale commercial or industrial projects. · Relevant certifications, such as OSHA 30-hour, First Aid/CPR, and Electrical Journeyman/Master Electrician credentials (preferred). Skills: · Solid knowledge of construction project management, including scheduling, budgeting, and coordination of subcontractors. · Strong understanding of OSHA regulations, safety standards, and building codes. · Excellent leadership and communication skills, with the ability to manage and motivate teams and communicate effectively with clients and stakeholders. · Proficient in project management software and construction management tools (e.g., Procore, Builderstrend, MS Project). · Ability to read and interpret blueprints, specifications, and electrical schematics. · Strong problem-solving and troubleshooting skills to handle on-site issues efficiently and effectively Benefits: · Competitive salary commensurate with experience. · Comprehensive benefits package, including health, dental, and retirement plans. · Opportunities for professional growth and advancement within a rapidly expanding company. · Collaborative and supportive work environment. If you meet the qualifications outlined above and are ready to contribute your skills to the team at Hays Electrical Services, we encourage you to apply. Join us in providing exceptional service to our clients and supporting our company's operations. Apply now! Powered by JazzHR eU2XLn5JwP

Job Description Overview IES Residential, Inc. is one of the nation's largest and most respected electrical, plumbing, HVAC, solar, and cable solutions providers for single-family homes and multi-family complexes since 1973. We provide comprehensive integrated solutions that light up our world. We make homes come to life. IES is a national provider of industrial products and infrastructure services to a variety of end markets, including electrical, mechanical and communications contracting solutions for the commercial, industrial, residential and renewable energy markets. IES is publicly traded on NASDAQ under the symbol IESC. As of the end of IES’s 2024 fiscal year ending September 30, 2024, IES produced over $2.8 billion in revenue and employed over 9,400 employees at over 131 domestic locations across the United States. IES is an Equal Employment Opportunity Employer: Minorities, Females, Gender Identity, Sexual Orientation, Individuals with Disabilities, Protected Veterans Encouraged to Apply. From office buildings to wind farms, industrial complexes to housing developments, our employees and design professionals design, build, and maintain the systems that empower lives. Our commitment to our employees is reflected by our actions: • Safety is Priority One – and our record shows it, • Competitive Pay, • Company 401K plan with Employer Contribution Match, • Company Paid Time Off, • Company Paid Life Insurance, • Choice of Medical Coverage including Prescription and Short Term Disability Plans, • Choice of Dental and Vision Coverage, • Optional Long-term Disability, Critical Illness, Accident, Legal and Pet Coverage, • Auto and Home Insurance Discount Programs Responsibilities At IES Residential Inc., we’re not just a team — we’re a family. If you’re looking for a company that values its employees, encourages growth and learning, and provides stability in a thriving industry, we may be the right fit for you! We are one of the nation’s leading electrical construction companies, and we’re looking for talented Residential Electricians to join our team in the Austin area. Key Responsibilities * Perform house rough-in work: measuring, cutting, and pulling wire * Complete trim-out installations: plugs, lights, fixtures, and switches * Maintain a strong working relationship with the division manager * Lead the job site team and coordinate with helpers to complete tasks efficiently * Communicate progress and challenges with management, offering creative solutions * Enforce and follow company safety protocols and correct/report any hazards * Foster effective on-site communication, giving and receiving direction clearly Qualifications Requirements * Valid Texas Residential Wireman or Journeyman Electrician License * Minimum 3 years of residential electrical experience * Solid understanding of the National Electrical Code (NEC) * Strong problem-solving and communication skills * Must have reliable transportation and valid driver’s license * Must be able to pass a background check and drug screening

Job Description About Premier Datacom: At Premier Datacom, we specialize in delivering high-quality structured cabling and network infrastructure solutions. Our team supports a wide range of commercial and industrial clients by providing reliable, future-ready systems that support their business operations. We’re committed to professionalism, precision, and top-tier customer service. Open Positions: Structured Cabling Technicians (Tech I, II, III) We are looking for motivated and skilled technicians at multiple levels to join our growing team. Whether you’re just starting in low-voltage systems or have advanced installation and leadership experience, Premier Datacom offers opportunities to build your career with training, mentorship, and advancement. Technician I – Starting Rate: $20/hr Entry-Level / Support Role * Assist with installation of copper and fiber cabling (Cat5e, Cat6, Fiber Optic, etc.) under supervision. * Pull, route, and label cables in a variety of environments. * Learn proper use of tools, testing equipment, and installation standards. * Support Tech II and Tech III team members in daily tasks. * Ideal for candidates with limited experience but a strong work ethic and willingness to learn. Technician II – Starting Rate: $24/hr Experienced Installer * Install, terminate, test, and label copper and fiber cabling with minimal supervision. * Plan and execute cable routing (overhead, under-floor, conduit, etc.) efficiently and safely. * Read and interpret blueprints, floor plans, and specifications. * Install and configure network racks, patch panels, and related hardware. * Mentor Tech I team members on proper installation techniques. * Troubleshoot and resolve connectivity or installation issues. Technician III – Starting Rate: $28/hr Lead / Advanced Role * Lead complex installations and ensure adherence to industry standards and project timelines. * Provide technical guidance to Tech I and Tech II team members. * Oversee and quality-check all aspects of structured cabling projects. * Act as a key point of contact for project managers and clients on technical matters. * Troubleshoot advanced system issues and implement effective solutions. * Mentor and train junior staff, fostering team development. Qualifications (vary by level): * Tech I: Strong work ethic, willingness to learn, and ability to work in construction environments. * Tech II: 2+ years of structured cabling or related experience, demonstrated technical proficiency. * Tech III: 5+ years of structured cabling experience with leadership responsibilities. * Familiarity with industry tools and testing equipment (toner, tester, punchdown tools, OTDR, etc.). * Ability to safely operate ladders, lifts, and hand/power tools. * Valid driver’s license and reliable transportation required. * BICSI certification, OSHA 10/30, or other relevant credentials are highly desirable. What We Offer: * Competitive starting wages: Tech I ($20/hr), Tech II ($24/hr), Tech III ($28/hr) * Opportunities for advancement and specialized training * Supportive team environment and on-the-job mentorship * Paid holidays and PTO (after applicable probationary period) * Tools and equipment provided as needed * Consistent work with reputable clients and projects

Job Description With over 18 years of experience and hundreds of million-dollar projects completed, Hays Electrical Services provides excellent service to customers in industries hospitality, commercial and solar. Hays Electrical Services approaches each project with a cooperative mindset, working with business owners, contractors, and subcontractors towards the common goal – successful project delivery. Position Overview: The Foreman is responsible for overseeing the day-to-day operations of electrical construction projects, ensuring they are completed safely, on time, within budget, and to the highest quality standards. This role involves supervising field crews, managing project schedules, coordinating with subcontractors and suppliers, and ensuring compliance with safety regulations and project specifications. The Superintendent serves as the primary on-site leader, providing guidance, troubleshooting issues, and ensuring the project progresses smoothly and efficiently from start to finish. Key Responsibilities: · Project Oversight & Management: Supervise and manage the daily activities on electrical construction projects, ensuring that all electrical work is completed according to project specifications, within established timelines, and in compliance with local codes and safety standards. · Team Supervision: Lead and manage electrical crews, assigning tasks, providing guidance, and ensuring that all team members follow safety protocols and work efficiently. Monitor crew performance, provide training, and motivate team members to meet project goals. · Scheduling & Coordination: Develop and maintain detailed project schedules in coordination with project managers, ensuring that work is completed on time and in alignment with the overall project plan. Coordinate work with other trades and subcontractors to minimize delays or conflicts. · Quality Control: Monitor the quality of work performed, ensuring it meets company standards, industry regulations, and client expectations. Conduct regular inspections and address any deficiencies immediately to maintain the highest quality and workmanship on the project. · Safety Compliance: Ensure that all work is performed in accordance with OSHA guidelines and company safety policies. Conduct regular safety meetings and inspections, identify hazards, and implement corrective measures to ensure a safe work environment for all crew members. · Material & Equipment Management: Ensure that all necessary materials, tools, and equipment are available and properly maintained on the job site. Track inventory, coordinate with procurement teams for deliveries, and manage any material shortages to prevent work stoppages. · Budget & Cost Control: Monitor project costs to ensure that the electrical work stays within the budget. Work with the project manager to address any cost overruns, manage labor costs, and identify cost-saving opportunities without compromising quality or safety. · Client & Stakeholder Communication: Serve as the primary point of contact for clients, project managers, and other stakeholders on the job site. Communicate project status, any issues or delays, and ensure that client expectations are met. Address and resolve any client concerns on-site. · Problem Solving & Troubleshooting: Identify and resolve any issues or obstacles that arise on the job site, such as design discrepancies, unforeseen conditions, or resource shortages. Work with the project manager and other stakeholders to find effective solutions. · Documentation & Reporting: Maintain accurate records of daily activities, including work performed, materials used, manpower hours, and any issues encountered. Submit regular progress reports to the project manager and keep detailed logs for project tracking and future reference. · Project Close-Out: Ensure that all electrical work is completed according to project specifications and that the job is ready for final inspection. Assist with the preparation of as-built drawings, warranty documentation, and any other necessary close-out documentation for the client. Qualifications: · High school diploma or equivalent (required). An associate’s degree or certification in construction management or electrical technology is preferred. · 5+ years of experience as a superintendent, foreman, or similar role in electrical contracting, with experience managing large-scale commercial or industrial projects. · Relevant certifications, such as OSHA 30-hour, First Aid/CPR, and Electrical Journeyman/Master Electrician credentials (preferred). Skills: · Solid knowledge of construction project management, including scheduling, budgeting, and coordination of subcontractors. · Strong understanding of OSHA regulations, safety standards, and building codes. · Excellent leadership and communication skills, with the ability to manage and motivate teams and communicate effectively with clients and stakeholders. · Proficient in project management software and construction management tools (e.g., Procore, Builderstrend, MS Project). · Ability to read and interpret blueprints, specifications, and electrical schematics. · Strong problem-solving and troubleshooting skills to handle on-site issues efficiently and effectively Benefits: · Competitive salary commensurate with experience. · Comprehensive benefits package, including health, dental, and retirement plans. · Opportunities for professional growth and advancement within a rapidly expanding company. · Collaborative and supportive work environment. If you meet the qualifications outlined above and are ready to contribute your skills to the team at Hays Electrical Services, we encourage you to apply. Join us in providing exceptional service to our clients and supporting our company's operations. Apply now! Powered by JazzHR mbHh2y9GJc

Job Description Job Title: Project Manager - Commercial Construction Location of Projects: Austin, TX Here is the perfect background for success: A committed hardworking Commercial Construction Project Manager with ground-up & remodel experience working for a commercial general contractor who wants to join an innovative team of trendsetters in modern construction methodologies. A successful candidate must possess the knowledge, experience, and self-confidence to engage and professionally interact with consultants and clients alike. Crucial to this position is to have the inner drive and ability to daily communicate/coordinate with each respective superintendent to gain assurances that each project is staying the course relative to CD compliance, schedule, accounting, quality, safety, and all project administrative components. A significant part of this role will also include a great deal of dialogue with subcontractors/suppliers partnered up on active projects. Candidate must be professional, integrity driven, and a personable leader committed to the overall objective and self-development within the company. This position could require the oversight of a minimum of 4 to 5 projects at any given time. Who We Are: Engen Contracting, Inc. (“ECI”) builds sound commercial structures that typically range from one and half to ten million per project. We focus on Ground-Up Construction for Retail, Restaurants, Self-Storage, Office-Warehouses, Medical, General Office, Child Development, etc. ECI is headquartered in Austin and our client base has us covering projects in Central Texas as well as targeting the other major markets. ECI is driven by a team that consists of an amazing group of hardworking, productive, and dedicated team members who love what they do and excel at being the best. Our team is not only accountable to the company but also to themselves and are individuals that continually strive to be the best. If you possess the relevant experience that matches our project's scope and requirements, and if you resonate with our philosophy, we warmly invite you to join our dynamic and successful team. Overview: What You’ll Be Doing: The following is a list of the major responsibilities of the Project Manager: • Proficient with Procore, • Input with pre-construction and closeout processes, • Routinely monitor project budgets and perform project forecasting, • Assessment of any project plans and specifications so thoughtful comments can be provided as they relate to the design, scheduling, and possible cost-saving measures, • Assist estimating team in the preparation of developing a final project budget, • Preparation of the general conditions budget, • Have confidence in your own ability to intelligently communicate with not only your peers but all other involved partners towards the execution of any given project, • Push for timely submissions/reviews of all shop drawings and other required approvals, • Create the project schedule on Microsoft Project. Monitor and maintain the schedule on a weekly basis and identify areas needing attention at any given point of a project, • Create & provide weekly updates for the OAC meetings. Schedule and facilitate these meetings, • Identify and communicate to the Consultant/Client any errors, discrepancies or omissions contained within the Consultant’s construction documents, • Expedite all RFI’s & CO’s and maintain all logs, • Monitor site safety and ensure that the requirements of the Occupational Health and Safety Act are addressed, • Ensure completion and track all independent testing and inspections as needed, • Issue monthly progress draws and invoicing to consultants and clients, • Maintain and enforce good construction standards, • Maintain control and responsibility for the security and operation of equipment on the job site in conjunction with the site superintendent, • Control and monitor labor, material, and equipment, • Ensure “as-built” drawings are prepared as work progresses by the superintendent as well as all trades during the construction period and be prepared to issue final set closeout submission, • Ensure all required municipal inspections are current, • Prepare and expedite project deficiencies, • Other Duties as assigned or needed to fulfill job requirements, • This is a full-time employed role. In addition to your salary, you will also have access to Medical/Dental/Vision benefits with multiple care options. We offer 401k with employer-matched contributions for 40+ hour positions, salary exempt professional - Benefits (Health/Dental/401k) are provided for salaried positions. Qualifications & Requirements: To be considered for this position you will possess the following skills, attributes, and abilities: • Minimum 3-5 Years experience as a Commercial Construction Project Manager on new Ground Up & interior Tenant finish out of building commercial and industrial, • College or university degree in a construction-related field, • Must understand construction terms, scheduling, and planning, • Proficient in Procore, Bluebeam, Microsoft Project, Excel, etc., • Excellent organizational, presentation, and interpersonal skills. Important: There are some important things to consider. • Absolutely no alcohol or drugs in the workplace, • Acceptable background checks & drug tests are a condition of hire, • ECI conducts a personality assessment to see if you’ll fit within our culture and work style; it’s important to us that you’re happy in your role, that you bring the right set of skills and aptitude, and that your approach to work fits our approach., • Field Personal and some Office Based Personal must have a valid Texas Driver’s License (If out of state, you have 60 days to obtain a valid Texas Driver’s License)., • This position is with the intent of creating a long-term relationship. Our hope is that once you start, you’ve found a role and company that you can be a part of for a long time., • This is NOT a traveling position. Powered by JazzHR t7y53SBBAp

Job Description Summary Our client is a highly sought after Mechanical & Plumbing Commercial and Industrial Contractor located in the Austin, TX area. They are in immediate need of a Project Manager. Due to their unparalleled customer service and unique offerings their business is experiencing exponential growth, which is opening incredible opportunities for their staff members. A Project Manager will provide overall management direction for a project or group of projects and will perform additional duties that include procuring equipment and subcontracts, monitoring and accurately projecting job costs, maintaining billing and schedules and providing technical support and leadership to the field. Additional responsibilities include providing production oversight with the projects Superintendent on the day-to-day activities of assigned projects. The Project Manager will also develop and maintain long term customer relationships to foster better communications and develop future work. Duties & Responsibilities • Provide production oversight to the project Superintendent on the day-to-day activities of assigned projects., • Review project estimates and verify accuracy of entry into job cost system as well as accuracy of initial estimate., • Conduct pre-job and continuing planning meetings to ensure all project team members understand contract terms and conditions, clauses, schedules, or any unusual requirements of the project., • Documents planning meeting results and ensures all action items are completed. Develops and keeps current all project schedules., • Monitors personnel schedules to ensure they match project schedules., • Establishes and executes subcontract and equipment buy-outs to support schedules and funding., • Visits job sites or onsite offices daily performing work inspections, checking job progress, and resolves project and contract issues., • Investigates job issues and implements corrective measures., • Manages scope changes to ensure they are processed and incorporated into the current scope of work in a timely manner., • Provides material takeoff, estimate and pricing for changes to work scope., • 5 years minimum of relevant work experience managing construction projects is required, renovation work experience is a plus., • Negotiating experience in construction change orders and project presentations required., • Ability to solve complex, multi-faceted problems using various problem-solving techniques., • Strong written and oral communications skills and presentation skills., • Ability to interpret contractual documents, plans, specifications, schematic diagrams, and isometric drawings., • Proficiency with job cost accounting systems., • Proficiency utilizing the Microsoft Office suite, with testable skill at the intermediate level in Excel., • Understanding of financial models used in fixed price, cost plus and unit rate/price contracting., • Ability to be reasonably on-call as necessary to support the on-going 24/7 operations of our clients which may include evenings, weekends, and some holidays., • Weekly Pay, • Vacation, • Paid Holidays, • Career Advancement & Training Opportunities, • Technician Tool Account, • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401K, • Life Insurance, • Disability InsuranceEmployment Type: Full time Location: Austin, TX

Job Description Founded in 1908, Flintco now employs more than 800 people in 8 cities serving clients in healthcare, education, hospitality, sports and industrial. Flintco also self-performs concrete, steel erection and excavation. Nothing matters more to us than the quality and growth of our people. Our teams are smart, humble and disciplined. Flintco is recognized for its commitment to safety and quality, using Lean principles as a guide to continuous improvement. The five guiding principles of our Ethos are: Safety, Integrity, Quality, Accountability and Honesty. We live it every day. The Project Manager will act as the liaison between Flintco, the owner representatives, major subcontractors, architects, and engineers, and provides valuable input based on his/her construction expertise to benefit the project. Responsible for providing management supervision to project personnel on assigned construction projects and ensuring that the projects are completed in compliance with Flintco 4 Life, within budget and on schedule. Responsible for overall management direction for all the functions required to successfully deliver project(s), including assuring sufficient resource allocation and client satisfaction. Supervises assigned subordinate Project Administrators, Office Engineers, Project Engineers, Assistant Superintendents, Superintendents, and Assistant Project Managers. Essential Duties and Responsibilities All duties and responsibilities include the following; however, other duties may be assigned. To perform in this position successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Review preparation and culmination of project estimates and bids and collaborate with management in selecting and assigning project personnel., • Review the selection of subcontractors and completion of contract arrangements and review proposed materials and shop drawings from subcontractors and suppliers., • Review with project personnel the preliminary project schedule and when appropriate the detailed project schedule., • Ensure that all required project management/administrative pre-requisites (i.e., cash flow plan, subcontractor lists, manufacturer lists, submittal/procurement logs, etc.) are prepared and submitted to the architect and ensure these plans are properly administered, as in submittals expedited, received, logged, and approved., • Collaborate with the Project Superintendent in overseeing the delivery of materials to the job site or outside storage, and in ensuring that their receipt is properly recorded., • Monitor construction activities, resolve problems and issues which arise, especially those pertaining to changes, deficiencies and/or subcontractor performance. Review monthly project status reports, project billings, and provide information as required to keep upper management and client properly informed., • Ensure that "punch list" items are completed. Ensure that closeout documentation is submitted (i.e., drawings, operation and maintenance manuals, and warranties from subcontractors and suppliers). Participate in and expedite fair settlement of final disputes, litigation, and final payment dispositions. Knowledge/Skills/Ability Knowledge and ability to prepare detailed construction project plans, schedules and estimates and to make proper modifications to such, using a personal computer and standard company software. Ability to read and interpret construction drawings, shop drawings, technical specifications. Ability to calculate square footage, volumes and percentages using a personal computer and calculator. Ability and skill in communicating effectively, both orally and in writing, as in providing written and oral instructions to employees and in communicating with architects, clients, and subcontractors. Knowledge of and application skills in geometry, trigonometry, and algebra. Working knowledge of personal computers and basic software programs. Ability to manage project teams and large groups of personnel, and ability to accomplish desired results through delegation. Preferable software capabilities: • P6, • Procore, • BIM 360, • Newforma, • e-Builder, • Microsoft Project/Office Education Bachelor's degree in Construction Management, Construction Technology or a related discipline or an equivalent combination of education and experience. Experience At least 5 years of progressively responsible experience in construction management, including estimating, project management, scheduling, cost control, and personnel administration or an equivalent combination of education and experience. Physical Requirements • Physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this position, the employee is regularly required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear., • The employee must occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • Occasionally, especially when managing multiple projects and during problematic opening and/or closing phases of projects, mental stress can be taxing., • May be required to work long hours for extended periods of time. #on-site

Job Description Founded in 1984, Firetrol is the national leader in fire protection & life safety services. We are currently seeking an Sprinkler Project Manager to join our team of over 1,200 of the best fire protection professionals in the industry in our Austin, TX. This position will be for a industrial manufacturing client estimated project length of one year with possible extension. Job Description: • Oversee and direct construction and small service projects., • Review contracts, specifications and bid drawings for the execution of assigned projects., • Review the project in-depth to schedule deliverables and estimate costs., • Coordinate and direct construction workers and subcontractors., • Select tools, materials and equipment and track inventory., • Meet contractual conditions of performance., • Review the work progress on daily basis., • Prepare internal and external reports pertaining to job status., • Work effectively with a wide variety of people., • Handling multiple priorities, project duties and responsibilities., • Highly organized record keeping and document management., • Identify project discrepancies and assist with solutions., • Analyze, manage, and mitigate risks., • At least 10 years of experience in fire sprinkler installation and service., • Minimum of 3 years in project management roles., • Strong familiarity with NFPA 13, NFPA 20, NFPA 25, and FM Global Standards., • Comprehensive understanding of Fire Sprinkler Design principles, including Wet, Dry, Preaction, and Deluge systems. Firetrol offers competitive wages and top-of-the-line benefits that include health, dental vision, life insurance, short and long term disability, generous paid time off practice and a 401(k) plan with a generous company match and immediate vesting. Additionally, sponsors training and education opportunities. Finally, Firetrol offers career growth opportunities, not just a job.

Job Description Hanes Geo Components (HGC) converts and distributes erosion control and soil stabilization products to distributors and contractors throughout the United States and Canada. HGC is looking for a detail-oriented, competitive Project Estimator who will estimate project bids and manage those projects through the pipeline. This person will learn our business from the ground up, work alongside a dynamic sales team, and drive project sales execution. Responsibilities: • Identifying bid opportunities for an assigned region, evaluating and completing materials take-offs, bidding, coordinating with field sales staff, and managing the process to project close., • Additional responsibilities include qualifying products, providing specs on products and frequently reviewing technical specification requirements for products., • Provide technical sales support, for contractors, engineers, and field sales staff., • A bachelor’s degree is required, and qualified candidates must have a working knowledge of the construction industry., • Must be technical and analytical, • Has excellent communication skills Hanes Companies is a people-first organization dedicated to providing a complete benefits package for our employees and their families. Benefits include health/dental/vision insurance, retirement savings with company match, discount stock plan, paid time off, paid holidays, employee assistance program, gym reimbursement, education reimbursement, and many more! Equal Employment Opportunity/Veterans/Disability Employer Powered by JazzHR ZwoWMTrKPR

Job Description BGE, Inc., is open to Civil Engineering Project Manager/Sr Project Manager level candidates for the Site Development department in one of our South Austin, TX office (Directors Blvd). Responsibilities: • Direct responsibility for projects and leading a team in the site development of plans and specifications for commercial/retail, and industrial. In addition, some land development in multi-family and other types of projects that include paving, grading, drainage, water lines, sanitary sewers and other miscellaneous items., • Serve as the point of contact for clients., • Responsible for project management reporting and client invoicing., • Will supervise the work of Engineers and CAD Technicians and manage resources for projects., • Bachelor's degree in civil engineering or related field., • Registered P.E. in Texas., • 10 years of experience in civil engineering for commercial, retail, industrial, or multi-family site development that includes paving, grading, drainage, sanitary sewer, storm sewer, etc., • 5 years of experience as a Project Manager, • Solid working knowledge of Civil 3D, AutoCAD, HEC-HMS, StormCAD, or other modeling software., • Excellent written and verbal communication skills., • Experience working on projects for cities/municipalities or counties is preferred. BGE, Inc. is a nationwide consulting firm with over 1,200 employees across 25+ offices that provides services in civil engineering, planning, landscape architecture, construction management, survey and environmental services for public and private clients. We have over 1200 employees in more than 25 offices. Our employees enjoy a comprehensive benefits package to include outstanding health care, generous 401(k) match, career mapping and highly competitive time away from work programs to include dependent care and flexible Fridays. Benefits * • Flex time – Start from the hours of 7am – 9am, • 9/80 schedule choice - every other Friday off - 3-day weekend every other week!, • Unlimited Sick Leave, • Personal time Allowances (no vacation time deducted for Dr appointments, family care, 32-hour dependent care, etc.), • Vacation Time: 0-5 years in industry 2 weeks’ vacation, 5-10 gets 3 weeks, 10+ gets 4 weeks., • Vacation Carry Over: 240 hrs vacation carries over to the next year., • 9 Holidays, • Merit Based Bonus Compensation, • 4% 401k Match with immediate vesting / 3% Safe Harbor contribution, • Medical, Dental, Vision, • Mentorship program NO SPONSORSHIP NO AGENCIES

Job Description MWH is a leading water and wastewater treatment-focused general contractor in the US with a rich history dating back to the 19th century. Fueled by the mission of Building a Better World, our teams are rapidly growing across the nation. As a company committed to our team's well-being and growth, we offer a supportive work environment, opportunities for advancement, and the chance to contribute to a mission that shapes the future. Your expertise and ambition are valued here. The work we do matters. The critical systems infrastructure we build changes lives, betters' communities, and improves ecosystems. If you're passionate about this, we want to hear from you! About the Role MWH is currently seeking an experienced Senior Project Manager to support and lead critical water, wastewater, and advanced water treatment plant construction projects for both municipal and industrial clients (including advanced technology sector clients) based out of Austin, TX. Projects may be either integrated project delivery such as CM-at-Risk or Design-Build, or traditional Design-Bid-Build. Essential Functions • Plan, organize and staff key field positions or subordinate project managers. Coordinate staffing with US Operations and other Area department heads., • Establish project objectives, policies, procedures and performance standards within boundaries of corporate policy., • Initiate and maintain liaison with prime client and A/E contacts, to facilitate preconstruction and construction activities., • Monitor/control construction through administrative direction of on-site construction managers and superintendents to ensure project is built on schedule and within budget; investigate potentially serious situations and implement corrective measures., • Represent Company in project meetings, assist in labor negotiations/strategy meetings, etc., • Manage financial aspects of contracts (fee payment, rental equipment, income/expenses, etc.) to protect company's interest and simultaneously maintain good relationship with Client., • Work jointly with other members of the project team to complete the MWH Constructors' Management Administration Plan prior to initiating any fieldwork. Use the planning guidelines and tools provided throughout the project., • Assure that direct reporting employees follow safe work practices and use company guidelines and policies for planning and executing work in a safe manner., • Work in a manner to ensure your personal safety and that of fellow employees by following company health and safety guidelines and policies., • Provide leadership and technical support to project engineers, field engineers and superintendents., • Procurement of subcontractors and materials thru Purchase Agreements and Subcontracts., • Support Change Management, Cost Estimating, revenue and Cost Forecasting and Scheduling., • 4-year engineering/construction management degree or equivalent experience and training/education., • Minimum of 8-15 years of construction, design, finance and management experience/knowledge required on heavy civil or industrial construction projects., • 3 - 5 years of experience on water or wastewater plant projects., • Must be able to apply innovative and effective management techniques to maximize employee performance., • Thorough understanding of corporate and industry practices, processes, standards, etc. and their impact on project activities vital., • Superior communication and interpersonal (tact, diplomacy, influence, etc.) skills essential., • Safety oriented, OSHA training., • Group health & welfare benefits including options for medical, dental and vision, • 100% Company Paid Benefits: Employee Life Insurance & Accidental Death & Dismemberment (AD&D), Spouse and Dependent Life & AD&D, Short Term Disability (STD), Long Term Disability (LTD), Employee Assistance Program and Health Advocate, • Voluntary benefits at discounted group rates for accidents, critical illness, and hospital indemnity, • Flexible Time Off Program (includes vacation and personal time), • Paid Sick and Safe Leave, • Paid Parental Leave Program, • 10 Paid Holidays, • 401(k) Plan (company matching contributions up to 4%)., • Employee Referral Program MWH Constructors is a global project delivery company in heavy civil construction with a focus on water and wastewater treatment infrastructure. With the ultimate goal of delivering maximum value to clients and their local communities, MWH Constructors provides single-source, integrated design and construction services through a full range of project delivery methods. Incorporating industry-leading preconstruction and construction services, the Company’s multi-disciplined team of engineering and construction professionals delivers a wide range of projects, including new facilities, infrastructure improvement and expansion, and capital construction services. Equal Opportunity Employer, including disabled and veterans. Please note that all positions require pre-employment screening, including drug and background check, as a condition of employment. #LI-MK1 #LI-Onsite

Job Description EPC Services Company, a leading power/utility engineering consultant and construction firm, has an immediate opening for a full-time Warranty & Commissioning Construction Manager. This position is a traveling Construction Manager role for individuals with strong knowledge of the means and methods used in the construction of electrical substations, transmission lines, and renewable energy (solar and wind) collection systems. A Warranty & Commissioning Construction Manager (CM) may fill in as a Construction Manager at times and provide direct supervision of all subcontractor's activities and material receiving on the projects. The position of Warranty & Commissioning CM is an essential role in the organization. The CM is available on a 24-hour basis to respond to emergencies that may be covered under warranty. The CM is responsible for troubleshooting inquiries for client claims, field response and repairs as well as all aspects of the commissioning activities including client training and relationships for EPC Services projects across the U.S. This position requires a minimum of 80% travel. Its functions include 1:1 and/or collaborative client discussion of problems, resolution, and timing of repairs. Additional work may include field support of electrical apparatus testing, setting, and testing protective relays and functional verification of control, protection, and alarm circuits. The position will work with project managers to advise on safety, quality control/quality assurance, on-site reporting, environmental compliance inspections, and training as required. This position reports directly to the Project Manager for all project specific issues and reports to the Manager of Warranty & Commissioning for assignment to the projects, for general installation practices, and inspection processes. Minimum Requirements: High school diploma or equivalent; switching certification; a minimum of 5 years' experience in transmission line and/or substation construction; understand all safety requirements and best practices to ensure that our employees and out subcontractors are always operating in a safe manner; capable of reading and understanding technical documentation and equipment manuals; familiar with IEEE standards, procedures, and guides; excellent organizational skills; strong written and verbal communication skills; working knowledge of a variety of computer applications including Microsoft Office (Word, Excel, PowerPoint, and Access), Vista ERP software knowledge a bonus; driving (ability to be insured to drive company vehicles). The successful applicant will be subject to client-mandated drug and background checking and is subject to EPC Services Company's auto insurance carrier requirements. Applicants must not require sponsorship for employment visa status (e.g., H-1B visa status) now or in the future. Salary commensurate with experience and education. Benefits include: • Medical, dental and vision insurance, • Flexible spending account, • Health savings account, • Life insurance, • Disability insurance, • 401(k), Profit Sharing and Employee Stock Ownership Plan, • Paid vacation, personal days, and holidays, • Paid Parental Leave An Equal Opportunity Employer Job Posted by ApplicantPro

Job Description Established in 1968, Cherry Coatings is one of the largest commercial paint contractors in the country. We are a family-owned business that provides architectural, industrial, and maintenance coating services for some of the most recognizable facilities in Texas, Arizona, Tennessee, and beyond. Our strong emphasis on high quality service and client satisfaction have made us the select partner for general contractors, property management firms, and facility managers. We are seeking an experienced Project Manager for our Austin area team, ideally with 3+ years in Commercial Floor Coatings estimating or project management. A successful candidate will be a highly organized team player who can deliver in a fast-paced environment. In this role you will ultimately handle all aspects of assigned projects from beginning to closeout. Wet apply flooring (epoxy, resinous etc....) experience in commercial environments is required Key Responsibilities: • Establish a safety & people-first culture., • Mentor, coach and develop all team members., • Ensure complete bid & cost evaluation for each project. Leveraging experience to look beyond the information., • Establish and maintain positive and effective relationships with customer, project team, architects, engineers, vendor representatives etc., • Experience in responding to RFP’s and formal presentation for a project., • Job Site visits to review existing conditions; partner with Operations & Field Management for input., • Develop preconstruction meeting schedule & monitor progress., • Present job cost, scheduling updates, and budget updates at regular intervals., • Review all project documents, for completeness & accuracy., • Develop creative & innovative approaches and solutions on a project-by-project basis., • Ability to identify, adapt and resolve complex issues., • Meet goals and metrics., • Lead, manage & motivate project teams during all phases of project., • Locate areas of improvement and propose corrective actions that meet challenges and leverage growth opportunities., • Adhere to high ethical standards, and comply with all regulations/applicable laws. Core Skills: • Leadership., • Exceptional level floor coating installation & product knowledge is a must., • Advanced awareness of Construction Site Safety Expectations., • High level of fluency reading plans, specifications & related documents., • Actively monitor project goals & outcomes., • Competent with Planswift, Pro Cor, BuildingConnected, Plan Grid, MS Office Suite., • Foster Cooperation among all employees Field & Office., • Exhibit effective listening & communication skills. Actively seek feedback and receive it in a non-defensive manner., • Strategic thinking & planning., • Strong ability to track and read profit indicators, financials., • Handle challenges and stressors in a productive, positive manner., • Professional Push Back., • Bilingual English/Spanish is a plus. Job Type: Full-time. Benefits: Outstanding work environment, Paid Holidays, Flexible Paid Vacation, Medical, Dental, Vision, Life, & more; 401K, Profit Sharing, Bonus and Career growth potential are just some of the amazing reasons to join our team! Company DescriptionServant Heart: Put Others First Cultivate: Invest time developing yourself. Always take time to help & mentor others Act Promptly: Respond the way you hope others respond to you. Fast & accurate. Innovate: Be Creative. Think outside the box. Deliver: Follow through, do what you say, honor your commitments. Go beyond expectations with excellence.Servant Heart: Put Others First\r\nCultivate: Invest time developing yourself. Always take time to help & mentor others\r\nAct Promptly: Respond the way you hope others respond to you. Fast & accurate.\r\nInnovate: Be Creative. Think outside the box.\r\nDeliver: Follow through, do what you say, honor your commitments. Go beyond expectations\r\n with excellence.

Job Description Bemana is searching for a Heavy Civil Construction Project Manager in Austin, TX to join the team of an innovative company in the civil construction space. Job Overview In this role, you will spearhead the planning, execution, and delivery of heavy civil projects (excavation, grading, site-prep, etc.), leveraging our innovative automation and mission control technology. This role is pivotal in overseeing the entire project lifecycle, ensuring projects are completed safely, meet quality expectations, stay on schedule, and remain within budget. Position Offers: • $100,000-130,000 salary (flexible) depending on experience, • 100% paid employee health insurance, dental, vision, • 3 weeks of PTO, • Manage project planning, budgets, schedules, and resources, maximizing the efficiency gains from automated equipment to deliver cost-effective outcomes, • Ensure strict compliance with safety regulations and industry standards, addressing the safety considerations of automated construction, • Monitor project progress, oversee job site operations, proactively identify risks, and implement solutions to maintain project timelines and quality standards, • Communicate regularly with clients, providing clear updates on project status, and milestones, • Train, support, and manage operators in the effective use of automated and remote-controlled earth-moving equipment, ensuring optimal performance, • Collect and analyze project data to drive continuous improvements in automation technology and operational processes, • Negotiate contracts with subcontractors and suppliers, • Assist estimating with pre-construction activities, including take-offs, vendor solicitations, and material pricing, • Minimum of 2 years of experience in construction project management, with at least 1 year focused on earthworks or heavy civil construction, • Proven track record of managing projects involving heavy equipment and earth-moving activities, with budgets ranging from $50,000 to $20 million, • Strong understanding of earthworks construction techniques, materials, and equipment If your experience matches the description above, submit your resume, and one of our recruiters will be in touch to tell you more about the position and learn more about your experience and aspirations. If your experience does not match this job description, we still encourage you to reach out to one of our recruiters, so we can learn about your professional aspirations for future job openings. About Bemana Bemana provides recruiting services to the nation's equipment and industrial sectors. Our clients and candidates value us for our specialized recruiting expertise, vast knowledge of the equipment and industrial job market, and ability to solve their most challenging employment needs. We have successfully recruited thousands of top-level professionals filling a wide range of management, sales, engineering, and technical positions across the nation. Welcome to Bemana and we look forward to getting to know more about you. Referral Program Bemana offers a $500 reward for referrals that lead to a hire. So, if this job or location is not for you, but you know someone that might be interested, send them this link and we'll send you a check if they get hired. Terms & conditions apply.

Job Description Job Title: Project Executive - Data Center/Mission Critical Various Locations: Austin, TX, Hutto, TX, San Antonio, TX, Wichita Falls, TX- Ability to Traveling Job Summary: We are seeking a results-driven Project Executive with deep expertise in data center construction to lead large-scale, mission-critical projects from concept to closeout. As a General Contractor, you will oversee all phases of construction, ensuring alignment with financial, technical, and quality goals. This role demands strategic leadership, operational excellence, and a strong command of MEP systems and commissioning protocols unique to data center environments. Key Responsibilities: • Lead the full lifecycle of data center construction projects — from preconstruction through commissioning and turnover, • Serve as the primary client interface, ensuring clear communication, satisfaction, and alignment of expectations, • Review and approve contracts, scopes of work, budgets, and schedules; proactively identify and mitigate risks, • Drive cost control and forecasting practices to maintain financial health and meet margin targets, • Oversee quality assurance programs to ensure compliance with client specs and industry standards, • Manage project risk and change control processes to address scope, schedule, and cost impacts, • Enforce safety protocols across all job sites in compliance with OSHA and company standards, • Optimize workforce planning, including subcontractor coordination and self-perform labor deployment, • Lead vendor management including prequalification, procurement, performance tracking, and compliance, • Apply deep knowledge of data center infrastructure — including power, cooling, redundancy, and commissioning standards — to guide project decisions, • Implement best-in-class project management tools and methodologies (Lean, BIM, Procore, etc.) to ensure consistency and efficiencyRequired Qualifications:, • Bachelor’s degree in Construction Management, Engineering, or related field (advanced degree preferred), • 10+ years of construction management experience, with 5+ years in data center or mission-critical environments, • Proven success managing multi-million-dollar projects with complex MEP and commissioning requirements, • Strong understanding of prefabrication, modular assembly, and integrated systems testing (IST), • Exceptional leadership, negotiation, and communication skills, • Proficiency in project management software (Procore, Primavera P6, MS Project, or similar), • PMP, CCM, or similar certification is a plusCore Competencies:, • Cost Accounting, • Industry Knowledge – Data Center Design & Construction, • Contract Review and Recommendations, • Project Risk and Change Management, • Quality Management and Assurance, • Workforce Planning, • Occupational Health and Safety, • Processes, Methodologies and Tools, • Vendor Management Yates Construction provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal and state law requirements. Yates complies with applicable state and local laws governing nondiscrimination in employment in every location where the company has facilities. About Yates Construction Ranked among the top commercial and industrial construction companies in the country by Engineering News-Record, Yates Construction is family-owned and provides a wide range of construction and building services. Incorporated in 1964 by William G. Yates Jr., we have steadily grown to become one of the top commercial and industrial construction companies in the nation. We are financially sound with a significant bonding capacity as well as vast personnel and equipment resources. Our portfolio includes commercial and industrial projects from various sectors including arts and culture, civil, commercial, education, entertainment and gaming, federal, healthcare, hospitality, manufacturing, municipal, retail, and technology. We work hard to understand our client’s business needs and continually look for opportunities to provide additional value to our clients and their projects. Our client relationships are the foundation of our success, and our primary goal is to help each of our clients achieve their vision. We do this by carefully managing the details and complexities of each project and communicating constantly with all team members. Yates Construction provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal and state law requirements. Yates complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities.

Job Description Project Manager Location: Determined based on assignment and project location. Employment Type: Regular, Full Time Timing: Immediate Position Overview At Gemma, the role of Project Manager is rooted in safety, quality, ethics, and requires exceptional communication skills, an ability to build strong, cohesive teams, and a willingness to foster a work environment founded on creativity and entrepreneurial spirit. We are looking for someone who is committed to the construction industry with safety, quality, costs and schedule in mind. The Project Manager handles overall execution and management responsibilities related to the engineering, procurement, construction and commissioning of a Power Plant facility. He or she manages the EPC Contract, Owner relations, OEMs, EORs, regulatory requirements, as well as ensures a smooth integration with other Project components including subcontractor, labor, landowner and community relations. The Project Manager is responsible for resolving all construction (commercial and contractual) related issues and managing project budget, schedule, QA/QC, safety and reporting. Responsibilities The Project Managers has ownership of overall project cost (profit and loss as well as risk management), schedule, safety & quality, as well as engineering and construction of the power plant, in addition to the following: • Will be the senior on-site, full-time, company representative performing the functions listed below., • Maintain relationship with Owner and Owner’s representative during the life of the project to ensure Owner needs are met and contractual obligations are satisfied, while simultaneously keeping the project moving forward., • Know and execute to the contract., • Lead, manage and direct project teams by providing communication, coordination and follow-up to meet project goals and objectives., • Ensure project scope or work, schedule and budget are clearly defined and understood., • Play an active role in all major subcontractor, vendor, and labor negotiations and final approvals., • Utilize established tools and procedures to monitor project success., • Ensure adherence to standards, permits, performance, quality and safety expectations., • Responsible for project Quality Assurance/Quality Control and Environmental, Health and Safety policies and procedures., • Bachelor’s degree in engineering or construction management from a four-year college or university, or equivalent experience., • Extensive knowledge and demonstrated experience with complex EPC projects, with the emphasis on simple and combined cycle thermal power plant projects., • Proven track record (minimum 10 years) in delivering power projects with experience managing overall scope and budgets., • Excellent communication, presentation and problem-solving skills., • Ability to negotiate suitable outcomes that mitigate project risks., • Ability to identify potential delays in project plan, develop a plan to resolve potential delays and mitigate impacts to the overall project cost and schedule., • Competent in the use of computer software applications used for project controls and administration, including Primavera, Microsoft Word, Excel, Access, Teams, and Outlook., • Willing & able to relocate to assigned project site for its entire duration, and to a new project site upon completion. Gemma Benefits • Advancement and Growth Opportunities, • Paid Time Off, • Comprehensive Nationwide Health and Welfare Benefits, • Company Sponsored Events, • Financial Planning and Savings Resources, • 401k Retirement Savings Plan, • Paid Holidays, • Work Life Balance About Gemma Power Systems: Gemma Power Systems, a wholly owned subsidiary of Argan Inc. (NYSE: AGX), is a leading Engineering, Procurement and Construction (EPC) company providing innovative solutions for the power, renewable and industrial industry. Our wide-ranging and comprehensive experience comprises more than 15 GW installed capacity including state-of-the-art combined cycle and simple cycle gas turbine plants, biomass projects, solar facilities, wind farms, biofuel plants, industrial and environmental facilities spanning the continental United States. Additional information about Gemma Power Systems can be found at . Gemma Power Systems is an equal opportunity employer. Employment and promotional opportunities are based upon individual capabilities and qualifications without regard to race, color, religion, gender, pregnancy, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other protected classification as established under federal, state, or local law.

Job Description We are seeking an experienced Commissioning Manager to lead and execute the commissioning efforts of mission-critical systems for a semiconductor project near Austin, TX. In this role, you will be responsible for planning, coordinating, and executing all aspects of the commissioning process across mechanical, electrical, plumbing (MEP), and low-voltage systems. You’ll work closely with construction teams, design engineers, commissioning agents, vendors, and client stakeholders to ensure all systems are installed, tested, and handed over in optimal condition for operational readiness. Key Responsibilities: Commissioning Planning & Oversight: • Develop and maintain a comprehensive project commissioning plan and schedule for all systems., • Lead commissioning meetings and coordination efforts with project teams, vendors, and third-party commissioning agents., • Oversee the review of commissioning documentation including test scripts, control sequences, submittals, and MEP shop drawings. Execution & Quality Control: • Manage functional and integrated systems testing (Level 1–5 commissioning), ensuring alignment with project specifications, commissioning standards, and client expectations., • Coordinate pre-functional checklists, start-up procedures, and site acceptance testing (SAT)., • Verify performance of critical systems including UPS, generators, switchgear, CRAHs/CRACs, BMS/EMS, chilled water, fire protection, and security/telecom systems., • Track deficiencies and manage resolution processes to close out punch lists and ensure proper documentation. Collaboration & Communication: • Serve as the central point of contact for all commissioning-related activities on-site., • Interface with general contractors, subcontractors, owner’s reps, and operations/facilities teams to ensure transparency and alignment., • Provide regular updates on commissioning status, issues, and milestones to internal and external stakeholders. Turnover & Documentation: • Lead system handover and closeout processes, ensuring delivery of as-built documentation, test reports, and operations manuals., • Support training sessions for facilities/operations staff on system operation and maintenance., • Assist in post-commissioning support and warranty period coordination as needed. Qualifications: • Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Construction Management, or related field; equivalent experience will be considered., • 7–10+ years of commissioning or field engineering experience in data centers, critical infrastructure, or large commercial/industrial projects., • Strong understanding of mission-critical MEP systems, power distribution, HVAC, controls, and redundancy configurations (N+1, 2N, etc.)., • Familiarity with commissioning guidelines and standards (ASHRAE, NEBB, ACG, Uptime Institute, etc.)., • Demonstrated leadership and project coordination experience with multidisciplinary teams., • Proficient in Microsoft Office Suite, Bluebeam, and commissioning platforms (CxAlloy, FacilityGrid, etc.)., • Strong written and verbal communication skills., • Certification or affiliation with professional organizations (e.g., CxA, LEED AP, PE license) is a plus. Company DescriptionAM Technical Solutions (AM), founded in 1994, is a proven and licensed architect, engineering, and construction firm. Our company delivers the entire scope of work for high-tech construction projects on schedule, on budget, and at the level of quality required by customers. The AM core foundation was built on quality programs that optimized semiconductor facility operations. As the company developed, AM added core competencies on pre-construction, procurement, and construction. Further, through strategic acquisitions, we added design, commissioning, and validation to create a complete end-to-end solution for high-tech construction project delivery. AMTS AE is a licensed Engineering and Architecture, Business Unit of AM Technical Solutions. At AMTS AE, we focus on providing design and consulting services for advanced technology, government, university, and industrial clients, specializing in research, pilot lines, manufacturing, cleanrooms, and advanced laboratories. We also provide start-up consulting, process improvements, industrial engineering, and high-tech operations support. For more information, please visit Technical Solutions (AM), founded in 1994, is a proven and licensed architect, engineering, and construction firm. Our company delivers the entire scope of work for high-tech construction projects on schedule, on budget, and at the level of quality required by customers.\r\n\r\nThe AM core foundation was built on quality programs that optimized semiconductor facility operations. As the company developed, AM added core competencies on pre-construction, procurement, and construction. Further, through strategic acquisitions, we added design, commissioning, and validation to create a complete end-to-end solution for high-tech construction project delivery.\r\n\r\nAMTS AE is a licensed Engineering and Architecture, Business Unit of AM Technical Solutions. At AMTS AE, we focus on providing design and consulting services for advanced technology, government, university, and industrial clients, specializing in research, pilot lines, manufacturing, cleanrooms, and advanced laboratories. We also provide start-up consulting, process improvements, industrial engineering, and high-tech operations support. \r\n\r\nFor more information, please visit

Job DescriptionAbout Adaptive Water Texas' 2022 State Water Plan projected that by 2030, demand would exceed supply by approximately 20%—and that analysis predated the data center boom now accelerating water stress across the state. Conventional, once-through water systems are unsustainable in Texas' increasingly arid climate, forcing large industrial facilities, municipalities, agriculture, and ecosystems into direct competition for scarce resources. To overcome our supply deficit, Texas needs more than incremental efficiency improvements to a fundamentally broken water supply model. Adaptive Water is redefining how water-intensive facilities source, treat, use, and reuse water. We design, build, and operate decentralized, multi-source systems that harvest and reuse alternative supplies—stormwater, wastewater, graywater, and brackish groundwater—eliminating dependence on potable water for applications that don't require it. About the Role As Project Manager, your first project will be to lead end-to-end delivery of a complex, high-stakes water infrastructure project for a gigascale data center campus. That means you have an unprecedented opportunity to demonstrate how Texas' rapidly expanding data center ecosystem can achieve water resilience, without dewatering or polluting communities or ecosystems. You'll lead the planning, design, construction, and commissioning of a multi-source onsite water system engineered to support hyperscale computing infrastructure in one of Texas' most water-constrained regions. Success requires technical excellence, creative problem-solving, stakeholder coordination across public and private entities, and the ability to navigate complex regulatory environments. Adaptive is an early-stage startup. In this role, you'll establish the processes, standards, and team culture that will define how Adaptive's Project Management Office delivers projects as we grow. You will work directly with the CEO and founding leadership team alongside leading water engineers, policy experts, and conservation scientists across Texas. What You'll Do • Direct all phases of project execution from scoping through commissioning for hyperscale data center water infrastructure supporting 5+ GW capacity, • Develop and manage comprehensive project plans including schedules, budgets, resource allocation, risk registers, and performance metrics, • Coordinate across engineering teams, specialized subcontractors, equipment manufacturers, regulatory agencies, and client stakeholders, • Translate Adaptive's technical vision into executable project strategy with clear milestones and deliverables, • Establish quality assurance protocols ensuring systems meet performance specifications and regulatory requirements, • Navigate complex permitting processes across multiple jurisdictions and regulatory frameworks, • Manage public-private partnership dynamics, including coordination with municipal utilities and local government entities, • Build, motivate, and develop high-performing project teams capable of executing complex, multi-disciplinary water infrastructure projects in dynamic, fast-paced environments Minimum Requirements: • Professional project management certification (PMP, PMI-ACP, or equivalent strongly preferred), • 7+ years leading enterprise-scale infrastructure projects in mission-critical environments (data centers, advanced manufacturing, industrial facilities, utilities, or water/wastewater treatment), • Experience with water infrastructure projects including treatment systems, industrial process water, or onsite water reuse, • Direct experience navigating permitting or compliance for regulated facilities, with understanding of environmental compliance and water quality regulations, • Demonstrated success delivering complex projects involving multiple engineering disciplines, regulatory agencies, and stakeholder groups, • Strong working knowledge of design and construction standards, regulatory requirements, project commissioning, and water infrastructure operations and maintenance, • Proficiency with project management software, BIM tools, and relevant engineering applications, • Exceptional organizational and communication skills, with ability to collaborate effectively across technical and non-technical audiences, • Advanced problem-solving skills with a pragmatic and adaptable approach to resolving project challenges, • Strong sense of responsibility, accountability, and ethical conduct in all aspects of project delivery, • Professional engineering license or advanced degree in civil, environmental, chemical, or mechanical engineering, construction management, or a related technical field, • Familiarity with data center operations, cooling systems, and critical infrastructure (experience in advanced manufacturing, power generation, or other high-reliability industrial environments translates well), • Familiarity with aquifer storage and recovery, managed aquifer recharge, or advanced water treatment technologies, • Background in Texas water policy, groundwater districts, or municipal utility operations, • Experience with projects involving complex contracting, such as public-private partnerships (P3), utility coordination, long-term facility management engagements, or operational handover

Job Description Project Manager- Site Development- Austin, Texas We are seeking a highly motivated and detail oriented Civil Engineer with 5+ years of experience to join our Civil/Site Development group in our Austin, TX office as a Project Manager. You will serve a key role in assisting and leading the Civil/Site team. The team provides site design and construction documents for a wide variety of commercial, industrial, municipal, and residential developments including mixed use, office, retail, multi and single family residential, warehouse/distribution, medical, and recreational facilities. What you will do: · Plan, schedule, budget, assign, supervise and motivate the work or project team members · Provide management of site engineering plans to include site plan layouts, site grading, storm drainage, water, utility, street and sanitary sewer design, and erosion control plans. · Provide oversight and quality control reviews for calculations, design drawings, and specifications for civil/site projects. · Provide oversight and quality control reviews for collection and analysis of field data. · Prepare written studies and project design technical reports. · Attend meetings with clients to deliver information and project status updates. · Professionally represent client issues at meetings and conferences with project stakeholders · Oversight of construction observation activities · Coach and mentor younger staff · Lead project team to coordinate with utility providers, contractors, and permitting authorities. · Assist in project pursuits and proposal preparation. · Other duties as assigned. Qualifications · BS in Civil Engineering or closely related engineering degree · Texas Licensed Professional Engineer or ability to obtain licensure. · 5+ years of progressive design experience in civil engineering with a concentration in land development · Adept at working on fast-paced projects. · Proficiencey in AutoCAD Civil 3D, Bluebeam, Microsoft Word and Excel software required. · Knowledge of local city, county, state and federal design regulations as well as industry practices and regulations · Deep understanding of the land development planning and entitlement processes · Experience using HEC-HMS and StormCAD or other modeling preferred. · Possess effective communication skills, both written and oral · Must be able to work effectively both on a team and individually. · Self-starter with the ability to manage, motivate, mentor and lead others · Active participation in professional organizations · Desire to seek out new business opportunities while maintaining project workload Travel: Some local day and overnight travel may be necessary for this position. It’s more than just a job… At GBA, we are innovative people who want to solve problems. We’re known for our technical excellence, but we bring so much more to the table. We strive to create remarkable solutions for a higher quality of life through our diversified services. Our people are ambitious, passionate, and committed to creating high quality, imaginative projects. We’ve created an environment where we celebrate our team’s eagerness to learn and grow. From birthdays and BBQs, to protecting the environment and helping families in need, GBA employees celebrate and support one another and the communities where we live, work, and play. Joining our team means you’ll have rewarding opportunities that challenge and inspire you.

Job DescriptionAustin or San Antonio, Texas Region Industry: Field Service / Construction / Building Materials Compensation: Competitive Base + Performance Bonus + Benefits Join Our Team as a General Manager! Are you a results-driven leader passionate about building teams and delivering exceptional customer experiences? We are looking for a General Manager to oversee regional operations for a growing field service organization serving commercial and industrial clients in Central Texas. Key Responsibilities: • Lead daily service, installation, and maintenance operations., • Develop strategic plans for growth and customer satisfaction., • Manage budgeting, P&L, and performance metrics., • Recruit and mentor field and office leadership teams., • Collaborate with corporate leadership on best practices., • Build relationships with customers and stakeholders. Qualifications: • 7+ years of operational leadership experience in field service or construction* MUST, • Proven success in P&L management and team leadership., • Strong understanding of dispatch and scheduling., • Excellent communication and problem-solving skills., • Bachelor's degree in Business or related field preferred. Apply now! Equal Opportunity Employer / Disabled / Protected Veterans The Know Your Rights poster is available here: The pay transparency policy is available here: For temporary assignments lasting 13 weeks or longer, the Company is pleased to offer major medical, dental, vision, 401k and any statutory sick pay where required. We are committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation for any part of the employment process, please contact your staffing representative who will reach out to our HR team. ActOne Executive Search participates in the E-Verify program in certain locations as required by law. Learn more about the E-Verify program. We also consider for employment qualified applicants regardless of criminal histories, consistent with legal requirements, including, if applicable, the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance. Pursuant to applicable state and municipal Fair Chance Laws and Ordinances, we will consider for employment-qualified applicants with arrest and conviction records, including, if applicable, the San Francisco Fair Chance Ordinance. For Los Angeles, CA applicants: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. #3297