Offres inspection à Hoboken, New Jersey - Page 4Create job alerts

Job Description About Down East Seafood For over 30 years, Down East Seafood has been a go-to source for the freshest, highest-quality seafood among New York’s most celebrated chefs. What began as a single van sourcing clams from Maine has grown into a full-line seafood operation, delivering sustainably sourced selections six days a week across the Tri-State area. Based in a 17,000-square-foot facility in the heart of Hunt’s Point, the Bronx, Down East combines local expertise with coastal reach—providing premium seafood to restaurants in NYC, Westchester, Long Island, Southern Connecticut, and Northern New Jersey. With a commitment to freshness, traceability, and chef-focused service, Down East continues to bring the ocean’s bounty straight to the back of house. Position Summary: The FSQA Supervisor will support the effective implementation of the Quality Management System. The QA Supervisor will support the ongoing review & development of all quality assurance programs and ensure they meet applicable regulations and standards. What you’lldo: • Develop and implement local site documents with oversight from direct supervisor., • Interact with USDA inspectors to ensure ongoing compliance with federal regulations along with timely resolution of deficiencies as needed., • Support facility compliance to policy and regulations through onsite monitoring and/or verification activities., • Knowledge in wet sanitation and pre-operational monitoring procedures. Conduct/Review Pre-op inspection records., • Support new vendor approval with oversite from direct manager., • Create a schedule of internal audits, lead or support execution of internal audits, track findings and ensure closure of corrective actions in a timely manner., • Maintain readiness for Third Party GMP audit., • Ensure that quality and food safety tests and procedures are properly understood and followed., • Schedule and deliver local site Food Safety including CCPs, Food Defense, and Quality Management system training per schedule., • Investigate, log, track, and trend customer complaints. Support Corrective actions as needed., • Collaboration with organizational leadership in the establishment of quality assurance objectives on an annual basis., • Provide FSQA support to internal projects (e.g. new items, new equipment installation, etc.) About you: • Bachelor’s degree in Food Science, Microbiology, or related field., • Minimum of three years of quality assurance management., • Knowledge of USDA meat and poultry regulations, FDA regulations, GMP’s, food safety audits, process procedures and documentation. GFSI audit experience highly preferred., • Excellent written and verbal communication skills., • Proficient in Microsoft Office Suite., • HACCP trained. The above job description is not an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties as assigned by their supervisor. Perks & Benefits: • Paid Vacations, Paid Holidays, • Health, Dental and Medical Benefits, • Weekly pay, • Life Insurance, • 5% above cost for our high-quality food products, • Employee discounts for travel and events, • 401k, • Employee Stock Purchase Plan The Chefs' Warehouse is an Equal Opportunity Employer that does not discriminate based on actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, pregnancy, gender identity or any other characteristic protected by applicable federal, state, or local laws. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment. We are dedicated to building an inclusive and diverse workforce.

Job Description We are looking to hire a Sheet Metal and Damper Repair Mechanic Helper to join our team! Your main responsibilities will be to assist lead installing various types of dampers including fire, smoke, and fire/smoke damper, installing duct access doors, and other various sheet metal modifications. Overview A Sheet Metal and Damper Repair Mechanic Helper is responsible for assisting the lead technician in completing inspections on, making repairs to, and installing new fire/smoke dampers in compliance with the National Fire Protection Agency (NPFA) NPFA 90A, NFPA 80, & NFPA 105 standards and in accordance with the Absolute Facilities Group (AFG) Training Methods and Procedures Manual. This position works in all aspects of fire, smoke, and combination dampers within mostly indoor climates, above ceilings, and inside ductwork, working on systems designed and tested as a component of the life safety assemblies. Most of the work takes place primarily in a healthcare setting such as hospitals, clinics, and nursing homes. Role and Responsibilities • MUST show up on time, follow safety and cleanliness protocols, and regulations per the jobsite foreman/manager., • Assist with and perform inspections and repairs on fire/smoke dampers in compliance with the NPFA 90A, NFPA 80, & NFPA 105 standards and in accordance with AFG’s Training Methods and Procedures Manual., • Installing new fire/smoke dampers, installing sheet metal access doors, and other ductwork related modifications., • Misc. maintenance work including minor masonry repairs, fire stopping, cleaning, etc., as needed., • Maintaining jobsite inventory of supplies, site tools and equipment., • Provide accurate and complete documentation of prior conditions and work performed for customer reporting using phone/tablet., • Good verbal and written communication skills., • Must be self-motivated and possess the ability to perform work throughout a facility self-directed which includes communication with customers and staff., • Maintain a professional appearance which includes consistent on-time arrival at job sites., • Administer proper infectious control measures as per hospital requirements when performing inspections and repairs., • Demonstrate ability to read, follow, and label Life Safety Plans/Drawings., • Capable of aligning work schedule with the on-site need for tools and materials, which includes unloading and loading of these materials and tools, and any other necessary equipment., • Some knowledge of computer software preferred (Microsoft Word & Excel, Email, and Adobe Acrobat), • Efficient with smartphones, tablets, computers, and chosen applications for daily reporting., • Valid driver license with an acceptable driving record. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • 8:00am – 4:00pm regular work hours at jobsites throughout NYC, • The employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs & ladders; balance; stoop, kneel, crouch or crawl; talk and hear., • Associate is required to spend 50% or more of inspection and repair time climbing and using various ladders to access dampers., • Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • Must be able to lift and/or move up to 40 pounds independently., • Working extended hours which includes evenings and weekends (compensation provided)., • Paid Holidays & Paid Time Off (vacation, sick, personal), • 401k with Employer Matching up to 5%Company DescriptionWe specialize in Operation, Inspections, Repairs, and Renovations of Healthcare Facilities in the NYC area.We specialize in Operation, Inspections, Repairs, and Renovations of Healthcare Facilities in the NYC area.

Job Description POSITION SUMMARY: The Engineering Intern is a college student in an accredited BSCE program. This individual will assist in the design of a variety of municipal and infrastructure projects (owned by municipalities and/or local school districts). Such projects may include roads, underground utilities, public buildings, recreational facilities, and parking facilities. We are seeking Civil, Mechanical, Electrical, Structural, Engineering Interns. PRIMARY DUTIES: · Develop or implement engineering solutions to assist clients with improving and maintaining their infrastructure. • Design transportation, utility, facility, or hydraulic systems or structures (as appropriate) using computer assisted design or drawing tools., • Compute load and grade requirements, water flow rates, or material stress factors to determine design specifications., • Assisting with building system design, including HVAC layouts, plumbing, and fire protection detail, • Supporting electrical and lighting design efforts for municipal and educational facilities., • Performing basic engineering calculations and collecting design data to support both civil and MEP project teams., • Estimate quantities and cost of materials, equipment, or labor to determine project feasibility., • Analyze survey reports, maps, drawings, blueprints, aerial photography, or other topographical or geologic data., • Conduct studies of traffic patterns or environmental conditions to identify engineering problems and assess potential project impact., • Perform all design activities ensuring compliance with environmental, safety, or other governmental regulations., • Prepare public reports on topics such as bid proposals, project status reports and design criteria reports., • Support of the field activities of project construction inspection staff, relating to design criteria, value engineering or changing site conditions. KNOWLEDGE, SKILLS and ABILITIES: · Oral and written communication skills · Ability to make public presentations · Ability to define problems, collect data, establish facts and draw conclusions to present to design team members. · Strong organizational skills and attention to detail · Knowledge of computer aided design software · Ability to work in groups as well as individually · CADD Experience a Plus EDUCATION/EXPERIENCE: · Pursuit of a Bachelor’s of Science Degree in Civil, Electrical, Mechanical Engineering from an accredited four-year college or university What We Offer Paid internship with mentorship from experienced engineers Hands-on project experience that builds technical and professional skills Networking opportunities within RVE’s multidisciplinary teams Potential for full-time employment upon graduation PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job Description Position Summary (position purpose): The Director of Quality is a hands-on leader, responsible for the leadership and harmonization of the quality function across all Mini-Circuits product design and manufacturing sites. This responsibility is focused on defining, articulating, and executing (through the local quality assurance teams and with the support of the local general managers), a consistent set of quality policies, metrics, and reporting processes. The unification of quality practices must consider the unique differences in manufacturing processes at the various locations, while incorporating best-in-class practices, policies, and procedures. The Director Quality must work in support of the local managers to assess their quality systems, identify gaps and opportunities for improvement, and support the acquisition of talent and systems to achieve the corporate quality standards and objectives. In addition, the role has the direct responsibility for consolidating and reporting quality metrics for the entire enterprise across all product lines. Local quality management is solid line reporting to the local general managers, and dotted line (indirect) reporting to the Director of Quality Job Function (day-to-day responsibilities): TECHNICAL QUALITY • Identify and drive approved unified quality procedures and compliance projects at all sites, ensuring consistency, best practices while adapting to product and manufacturing process uniqueness. All processes and products must meet high internal standards and regulatory requirements and ultimately deliver high-quality, cost-effective products to the customer., • Responsible for ensuring that all quality systems across all manufacturing sites are in full compliance with applicable regulatory requirements and are aligned with corporate quality policies., • Establish corporate guidelines for quality data collection and reporting, and provide technical direction and support to all sites on the implementation of quality data collection, metrics analysis, trending, and report generation in accordance with these guidelines., • Assess, analyze, and work with the local general managers to ensure that all QA responsibilities, including training, investigations, complaints, change control, document control, incoming inspection, manufacturing/lab oversight, and failure analysis, are implemented and maintained across all manufacturing sites in compliance with all corporate quality policies and programs., • Experience with and knowledge of some or all of the following: mechanical, electrical, electronic, and electromagnetic components and systems; PCB technologies, surface-mount and connectorized components; semiconductors; Analog, RF, Microwave, and mmWave technologies and products., • Ability to understand and drive the resolution of electrical and/or mechanical quality issues., • Maintain a strong independent role as it relates to supporting compliance-related decisions. SUPPLIER QUALITY · Implement strategies and processes to drive supplier performance improvement. · Address and resolve supplier quality issues with a sense of urgency, ensuring interim containment as appropriate, root causes are identified, and corrective actions are implemented and validated effectively. · Develop and lead effective supplier quality activities across our supply base, such as Quality Improvement Plans (QIP) and new/existing supplier audits. · Partner with the Strategic Sourcing team on new and sustaining supply base initiatives. · Support new product initiatives by ensuring supplier capabilities meet our required quality standards. · Ensure all major suppliers to Mini-Circuits have an effective Quality Management System capable of supporting our quality requirements. · Ongoing development of process capabilities (Supplier qualification / onboarding, product qualification, non-conforming material, process audits, etc) · Implementation of appropriate quality tools across the supply base (APQP, PPAP, FMEA, etc) · Meet or exceed annual supplier quality objectives as agreed upon with management. · Preparing, managing, and ensuring adherence to the Supplier Quality budget and forecasts LEADERSHIP • Develop, implement, and communicate a clear strategic vision for site quality to maximize employee alignment and engagement, and performance., • Establish and actively lead the company’s quality leadership team, providing input and direction to quality programs, policies, and quality plans., • Take the lead in review and negotiation of customer quality contractual requests (contract review, etc.), • Demonstrated ability to lead high-performing teams made up of technical and administrative quality and reliability personnel., • Coach and develop both direct and, as appropriate, indirect reports through ongoing, example-based performance feedback, annual performance reviews, and the provision of training and development opportunities. Ensure that performance issues are managed in a consistent and timely manner., • Actively demonstrate and perform all work in support of the core values and guiding principles., • Demonstrated ability to work with cross-functional organizations, including business and product lines, sales and marketing teams, supply chain, and operations group., • Lead change in the organization to continuously adapt to a dynamic business environment; apply learning to enhance organizational performance within the spirit of the company culture., • Deliver quality presentations at management review. Education: · BSEE, BSME, Business, Manufacturing, Operations or another related field of study is required. · MSEE / MBA preferred. Knowledge, Skills, and Competencies: · Minimum 10 years’ experience in a manufacturing quality business (or any of its support industries) within manufacturing, electronics preferred. · Exposure to a variety of quality (and preferably reliability engineering) roles and processes, and direct experience in a manufacturing environment, and exposure to supply chain management via a computer-based, enterprise-wide resource management system. · Experience with ISO 9001 and AS9001 strongly preferred. · In-depth working knowledge of product qualification concepts (DFMEA, PFMEA) and reliability-problem solving systems (8D, Gage R&R, SPC, 5 Why, etc.) · An established leader who can demonstrate his/her ability to lead change and implement sustainable quality systems in support of a complex commercial operation. · High aptitude for quality function problem-solving (root cause analysis, etc.) · Show insight and good judgment in assessing complex or uncertain alternatives, including the risks of each. Considers the impact on other parts of the organization before making decisions. · Ability to be hands-on as needed as the organization grows and changes. · Excellent written and verbal communication skills. · Demonstrated ability to work collaboratively with a team of engineers to create and support the activities during the life cycle of products, from conception through production and product release within stated time frames · Sensitivity to cultural dependencies is a must. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, sit, and use their hands to operate a computer keyboard. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision and the ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Additional Requirements / Skills · Comply, understand, and support corporate safety initiatives to ensure a safe work environment · Ability and willingness to abide by the Company’s Code of Conduct · Valid driver’s license and ability to drive for extended periods of time · Ability to travel up to 25% domestically and internationally · Disclaimer: The listed qualifications and requirements for each position are intended as guidelines. Mini-Circuits reserves the right to hire outside of these guidelines at Management’s discretion. · Mini-Circuits is an Equal Opportunity Employer and does not discriminate on the basis of actual or perceived age, race, creed, color, national origin, sexual orientation, military status, sex, disability, predisposing genetic characteristics, marital status, familial status, gender identity, gender dysphoria, pregnancy-related condition, and domestic violence victim status or protected class characteristic, or any other protected characteristic as established by federal or state law. #LI-SW1

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Structural Inspector. Naik is a New York-New Jersey engineering services firm which specializes in engineering design, field inspection, and Project Management/Construction Management, primarily in the transportation infrastructure industry. Responsibilities • Monitors contractor operations and verifying conformance with project plans and specifications, • Serves as the on-site structural inspector for construction work performed by the contractor and subcontractors., • Interacts with the construction contractor’s site supervision on field activities to ensure compliance with the construction contract requirements, • Prepares daily reports, correspondence, change orders, periodic payment estimates, and quantity computations, • Observes details of work performed by others, documenting results; obtaining photographic documentation of work performed, • Confirms compliance with technical documents and industry-specific standards and codes, • Reviews and downloads field data into laptop computer and transfer to company server, • Discusses projects with project team on a daily basis, • Makes accurate judgment-calls on a variety of construction field activities, • Performs other like duties, as assigned Qualifications • Bachelor’s degree in Structural or Civil engineering required, • 5+ years of experience in Structural inspection, • Experience with Transportation/Infrastructure projects required, • Experience working with public agencies (i.e., Amtrak, MTA, Metro North, LIRR), • OSHA 30-hour safety course is required, • MTA Track Safety Certification is a plus, • Experience with Project Management tools (i.e., Procore, Asite), • Excellent written and verbal communication skills, • Good time-management skills, • Ability to perform under pressure, • Good skills in Microsoft Excel, Word and Powerpoint, • A strong attention to detail is necessary. BenefitsNaik offers a competitive compensation package including: • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job Description Instrumentation & Controls Supervisor - Astoria, NY (NYC) Company Information: Alpha Generation manages and operates power generation facilities that are well positioned to provide reliable, secure, safe, and sustainable power to meet increasing demand for electricity. Our diverse portfolio of assets is owned by ArcLight Capital Partners, a leading middle-market, value-added infrastructure investment firm that owns assets across the power, renewables, strategic gas, battery storage, and transformative infrastructure sectors. ArcLight has invested over $28 billion in equity capital across 125 transactions totaling approximately $80 billion in enterprise value. ArcLight has assembled a best-in-class leadership team at AlphaGen to manage over 14,000 megawatts of power infrastructure across four RTO markets (PJM, NYISO, ISONE, and CAISO). This highly experienced senior management team has a proven track record of strategic, operational, and commercial success and is focused on value creation while managing risk. AlphaGen will oversee one of the largest domestic, independent power portfolios, with nearly $2 billion in annual revenue. Position Overview: Reporting to the Maintenance Manager of AlphaGen’s Astoria Generating Station, the Instrumentation and Controls Supervisor is responsible for the supervision, coordination, and oversight of I&C technicians engaged in the inspection, repair, calibration, and rebuilding of electrical and instrumentation systems and their associated structures. The Supervisor will ensure safe, reliable, and efficient execution of maintenance activities while supporting plant performance, compliance, and long-term asset integrity. Role and Key Responsibilities: • Direct, supervise, and coordinate the daily activities of Instrumentation & Controls (I&C) technicians., • Conduct System Condition Assessments to identify deficiencies, document findings, and implement corrective actions., • Utilize plant and industry-standard software and analytical tools to develop performance and availability improvement initiatives., • Participate in project planning and execution, including scope reviews, design basis requirements, walk-downs, compliance checks, and acceptance testing., • Plan and support major component overhauls and scheduled system outages., • Lead root cause analyses of forced outages and equipment failures, driving corrective and preventive actions., • Interface with and monitor activities of third-party equipment and service providers., • Document and resolve unplanned design basis changes., • Develop, review, and oversee acceptance test plans and ensure compliance with engineering standards., • Maintain and update design basis documentation to ensure accuracy and regulatory compliance., • Prepare and deliver technical reports and presentations to inform capital planning, senior management, and stakeholders., • Provide engineering and technical support to Station and Plant leadership., • Represent the organization on cross-functional committees and industry working groups., • Establish and maintain effective communication with internal teams, external contractors, and regulatory bodies., • Perform other related duties as assigned. Professional Requirements: • Minimum of 5+ years’ experience in industrial maintenance within a large process industry (power generation, refinery, military/merchant marine)., • At least 4 years of supervisory experience required., • Strong knowledge of control system design, construction, operations, maintenance, testing, and analysis within the utility, oil & gas, or marine propulsion industries., • Experience with DCS, PLC, BMS, low-voltage switchgear, breakers, power cables (up to 480V), UPS, and MCCs., • Proficiency in equipment sizing and analysis, life cycle management, protection schemes, relay settings, and PLC programming., • Familiarity with industry codes, standards, procedures, and specifications; ability to obtain advanced knowledge as required., • Proven leadership skills, including direct supervisory experience with the ability to lead, motivate, and develop personnel., • Prior experience supervising a unionized workforce is strongly preferred., • Bachelor’s degree in engineering or related discipline is highly desirable., • Experience managing a unionized workforce is a plus., • Must be able to work in indoor and outdoor environments in all weather conditions. Exposure to extreme heat, heights, high-voltage switchyards, confined spaces, fuel storage areas, marine environments, and other industrial settings. Use of appropriate Personal Protective Equipment (PPE) is mandatory., • Must have the ability to lift up to 50 lbs., • Must be able to stand and walk for extended periods., • Will be required to work while wearing respirators or SCBA equipment., • Must be able to climb stairs and ladders and perform work at heights using scaffolds., • Must be able to perform tasks in confined spaces and above active waterways., • Must be able to endure physically demanding environments while maintaining safety protocols. Schedule: • Standard hours are Monday-Friday arriving before and leaving after the workforce. The workforce hours are 7-3:30 which (typically) results in supervisors working a 6:30a – 4:00p schedule., • Overtime, nights, holiday and weekend work is required as the needs of the plant and equipment dictate. AlphaGen is an equal opportunity employer. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time,

Job Description Essential Job Functions: The Supervising Maintenance Worker (SMW) is responsible for the day-to-day maintenance, upkeep, and safe operation of the shelter facility. The SMW is responsible for ensuring compliance with all facility-related governmental regulatory requirements. Duties include performing janitorial and custodial tasks, operating all building systems including heating, hot water, and fire safety, undertaking repairs in consultation with supervisors and consistent with industry best practices. Under the direction of the Senior Director of Facilities Management, the Lead Maintenance Worker is responsible for: • Learn and integrate a trauma-informed, client-centered approach, using an anti-oppressive lens, into your work with clients., • Maintaining the shelter facility to comply with all applicable governmental regulatory requirements; Trains and supervises maintenance staff., • Over sees and evaluates staff work performance and recommends personnel action as appropriate in accordance with agency policies and procedures., • Orders janitorial and maintenance supplies as needed in a manner that is in compliance with Safe Horizon procurement and budgetary requirements and procedures., • Manages the maintenance supply budget., • Ensures that regular maintenance tasks are completed in a timely and efficient manner and that associated reports and checklists are completed and submitted to supervisors as required., • Maintains and accounts for Safe Horizon equipment and tools utilized for facility maintenance tasks including assigned vehicle(s)., • Utilizes computer-based systems and resources to assign work, order supplies, manage timesheets, etc., • Communicates and collaborates with the Shelter Program Director regarding facility maintenance needs, task, assignments, and maintenance work schedules., • Ensures that all daily, weekly, monthly and yearly cleaning and repair tasks are carried out and kept up to date and that the shelter is maintained in a sanitary, attractive, and orderly condition., • Develops and executes daily workflow and schedules for maintenance teams., • Monitor and ensures appropriate ordering, storing, inventory and use of shelter cleaning and maintenance supplies and equipment., • Conducts periodic inventory of furniture, appliances, supplies, equipment and machinery., • Prepares weekly facility inspection reports of each room/apartment., • Maintains and submits monthly vehicle use and site safety logs., • Prepare monthly vehicle log, life/safety inspections, web help desk summaries and daily task check list., • Monitors contractors’ work and other facility service providers in the shelter/ and or dwellings., • Assist in the establishing procedures and schedules for cleaning and maintenance of buildings, including trash disposal and removal., • Work in conjunction with shelter personnel to ensure residences (rooms, apartments, etc.) are ready for occupancy as needed., • General administrative and other related duties as needed and as assigned., • Certificate or certification in a building trade, maintenance, building systems or building equipment repair is desirable., • Requires knowledge and experience in supervision, industrial/commercial building maintenance, janitorial maintenance/housecleaning, repair and fire safety., • Demonstrated experience using and training personnel in the use of power equipment utilized in the performance of this job., • Demonstrated leadership skills including organizing, planning, scheduling and coordinating workloads to meet established deadlines and milestones., • Demonstrated English writing and verbal communication skills, along with strong interpersonal skills to effectively interface with all levels of employees, management and outside representatives., • Ability to safely lift and move a minimum of 50 pounds on a regular basis., • Ability to manage multiple demands and work well independently or within a team., • Valid NY State Driver’s license with no suspensions and fewer than 3 points required., • Basic computer skills a must: word processing, email, spreadsheets, and use of web-based systems., • Hours: full time, various hours, weekends and some evenings. AmeriCorps, Peace Corps and other national service alumni are encouraged to apply. Technology Statement: Applicants may be responsible for providing the equipment and tools they need to work remotely as required, such as access to a computer, internet service, and phone service. Safe Horizon will discuss potential solutions with candidates and may assist where needed and agreed to in advance. Please follow this link to view complete EEO Law and complaint filing information: Know Your Rights: Workplace discrimination is illegal. Hiring Range: $25.82 - $29.05 Hourly Full-time Hours: 35 Hours per week Full-time Benefits: Vacation Time, Paid Sick Time, Holidays, Medical, Dental, Vision, 403(b) Retirement Plan, Company Life Insurance, Medical/Dependent Care Flexible Spending Accounts, Tuition Assistance Program, Commuter Benefits Program, Gym Reimbursement, Parental Leave, Employee Learning Center

Job Description Job Description POSITION OVERVIEW: Under supervision of the Program Director, the Case Manager is responsible for providing case management, housing support to participants and monthly reporting requirements that will ensure compliance with the parameters of the program. The requirements listed below represent the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities as defined by the ADA to perform the essential functions of the job. KEY ESSENTIAL FUNCTIONS: Housing Liaison • Acts as liaison between participants, superintendents and building managers to ensure all repairs are completed to either the participant’s apartment unit or the building., • Maintains a Building and Apartment Log, which includes date, and condition of the apartments and buildings., • Provides case management and on site crisis intervention, • Completes required service plans., • Facilitates monthly CAB tenant meetings., • Educates participants with respect to good housekeeping and home-safety practices, budgeting and landlord/tenant relations, as necessary, • Maintains appropriate documentation of all tenant contacts., • Documents monthly progress notes in the participants’ chart, • Conducts home visits to help evaluate participants’ compliance with the rules and regulations of the program and to assess the need for referral to supportive services, • Takes random urine samples for drug screening toxicology, • May escort participants to social services agencies, as requested, • Responsible for completing annual tenant rent calculation forms., • Responsible for completing annual apartment inspection forms., • Updates monthly program data base., • Associate’s Degree or minimum of 60 verifiable college credits completed, Bachelor’s Degree Preferred, • Minimum of one (1) year previous relevant experience in a Mental or Behavioral Health environment required., • Ability to use business acumen to exercise good judgment and decision-making., • Ability to deal with sensitive issues with diplomacy and discretion., • Must be able to multi task with strong organizational skills., • Excellent interpersonal skills and able to communicate both verbally and in written form., • Commitment to cultural diversity and sensitivity., • Ability to maintain a professional demeanor under pressure, and operate with a keen sense of urgency and commitment to quality.

Job DescriptionDescription: Job Type: · Full Time · Hybrid Schedule Benefits: · Generous Paid Time Off, including vacation, sick and personal time · Multiple Medical/prescription plans to choose from · FREE Dental coverage · Vision Coverage Job Summary: As a Field Auditor in the Underwriting Department, you will conduct workers’ compensation insurance premium audits by reviewing employer records and inspecting employer operations to establish the appropriate premium basis and ensure proper classification. The completed audit will be evaluated against the insurer’s record with any discrepancies or inconsistencies addressed with the insurer. Your territory includes, but is not limited to, Northern New Jersey counties. Requirements: Required Skills/Abilities: • Strong ability to multitask and work in a team environment, • Excellent communication skills including active listening and the ability to communicate effectively verbally and in writing, • Highly proficient in Microsoft Office Suite or related software programs, • Extremely well organized with great attention to detail, • Service-oriented and able to resolve complex issues, • Ability to learn quickly and creatively solve new problems, • Independently conduct field audits and inspections in accordance with the Test Audit program, • Produce comprehensive audit reports detailing the findings and ensuring adherence to the Manual rules for premium development, • Respond to audit inquiries from company management and communicate with insurers, accountants and employers to resolve audit discrepancies, • Travel frequently to employer locations for on-site audits, with in-office presence required once per month, • Provide weekly reports detailing completed work and associated travel reimbursement requests in accordance with established procedures, • Bachelor’s degree with major in business administration or accounting, or equivalent insurance industry field audit experience, • Strong aptitude for working with various payroll records, business ledgers, state and federal tax filing forms, • Ability to properly apply provisions of the NJCRIB Manual with respect to audit/inspection requirements, • Frequent driving, standing, walking, bending, reaching overhead, extension, • Frequent handling of paperwork and computer equipment, • Must be able to push/pull, open/close file cabinet/desk drawers, • Must be able to lift 15 pounds at times, • Must be able to physically inspect property, • Must have current driver's license and current automobile insurance, • This position requires use of your personal vehicle, • Mileage is reimbursed at current IRS rates All qualified applicants will receive consideration for employment without regard to race, national origin, gender, age, religion, disability, sexual orientation, gender identity, veteran status, marital status or any other characteristic protected by law.

Job Description OUR MISSION: Our mission is to inspire and empower all young people to take control of their future. OUR VISION: We envision a world where everyone has access to an equitable path to success. PROGRAM DESIGN: RTS facilitates a variety of youth programs including after-school, summer camps, retreats, conferences and summer employment opportunities reaching thousands of young people throughout NYC each year. RTS emphasizes the youth development practice of the Circle of Courage in all our programs; creating an environment of Belonging, where young people can build their Independence, find and develop their Mastery skill, and practice Generosity in their communities. At the core of our programs are staff training strategies that enable our young professionals to develop extraordinarily meaningful relationships with the young people in their care who we call Our Future Leaders because that is what they all are. PRIMARY FUNCTION: The Program Director's primary functions encompass three core areas: i) ensuring the practical application of the RTS mission and vision for positive youth development within the program, ii) providing program staff with clear goals, direction, support, and growth opportunities while valuing them as employees, and iii) establishing and maintaining positive relationships with all key stakeholders. ORGANIZATIONAL ROLE: Supervisor: Program Manager Supervises: Program Staff and School Age Students Compensation: $58,500 Non-Exempt Location: Renaissance School of Art 319 E 117th St. New York, NY 10035 RESPONSIBILITIES: * Administrative Support, Compliance, and Implementation: * Oversee and supervise the program, ensuring compliance with Roads to Success standards. * Assist in staff hiring, and provide ongoing support, supervision, and evaluation of staff in alignment with Roads to Success guidelines. * Ensure all program elements are delivered on schedule, and program spaces are properly prepared for use, adhering to Roads to Success requirements. * Manage outreach, recruitment, application, enrollment, and retention processes as per Roads to Success regulations. * Provide program participants with the necessary resources to achieve their goals, in line with Roads to Success guidelines. * Maintain regular contact with school officials and staff throughout the program period. * Prepare and submit all required program reports to the organization in a timely manner, meeting reporting standards. 2. Youth Development: * Utilize positive youth development principles to foster social, emotional, and cognitive growth, and build self-esteem and responsibility in all participants. * Build positive relationships with participants and act as a positive role model. 3. Program Development: * Plan and organize program activities to achieve contractual goals and performance targets, aligning with Roads to Success standards. * Ensure the program site meets all safety and licensing requirements. 4. Family Engagement: * Meet with parents and facilitate planning and conducting staff and program orientation sessions. 5. Staffing and Program Supervision: * Approve timesheets bi-weekly and process as per organizational standards. * Maintain personnel and program records for inspection visits, following organizational guidelines. * Ensure proper staff coverage for scheduled and unscheduled time off. * Regularly communicate with staff to address issues and ensure deadlines are met. * Ensure all staff are eligible to work on respective sites. 6. Program Procedures and Safety: * Follow all Roads to Success protocols and procedures regarding safety, supervision, accident, and incident reporting to ensure participant safety and security. 7. Professional Development: * Conduct participant and parent orientations. * Attend required organizational and training sessions. QUALIFICATIONS: * A degree in Education or related field or NYS School Age Childcare Credential. * At least two years of experience in supervision and program development. * At least three years of experience in administering youth programming. * At least four years of direct experience in an academic/recreation setting. * Proficiency in MS Word, Excel, Power Point, One Drive, and Google Docs. * Excellent interpersonal skills and strong communication and writing abilities. * Ability to multi-task, meet set deadlines, and work well with others. * Willingness to go above and beyond program requirements for the safety and benefit of participants. EQUAL OPPORTUNITY EMPLOYER We are an equal opportunity employer, and all qualified candidates will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. We are committed to creating a diverse and inclusive workplace where all employees feel welcome and valued. We believe that diversity and inclusion are essential to our success in serving youth. DISCLAIMER This job description is intended to provide a general overview of the position and its essential functions. It is not intended to be an exhaustive list of all the duties and responsibilities that may be assigned to the staff member. The specific duties and responsibilities of the position may change from time to time, as determined by the needs of the organization. The staff member must be able to perform the essential functions of the position satisfactorily, with or without reasonable accommodation. Reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. Powered by JazzHR dVVJcPrw7M

Job Description Who We Are Jaros, Baum & Bolles (JB&B) is a MEP engineering firm headquartered in New York City with additional offices in Boston and Philadelphia. For over 100 years, JB&B has leveraged cutting-edge technologies with sound engineering practices to create building designs that have transfigured the skyline, reimagined healthcare, and brought us closer to a sustainable, low-carbon future. We foster a collaborative, high-performing culture in which our employees share the common goal of creating a progressive, inclusive, and fun work environment. JB&B values the voices and opinions of our employees. We are a team. We are a community. About the Role The Senior Project Engineer is a technically skilled and experienced engineer with developed communication, coordination, project management and leadership skills. The Senior Project Engineer manages larger projects and is the key lead for fieldwork, and a liaison for the design team. The Senior Project Engineer is expected to proactively coordinate, communicate, problem solve across disciplines, and exhibit the ability to balance the client relationship with the project’s financial goals. Overall Responsibilities • Reads, understands, and interprets construction documents (e.g. design drawings, submittals, etc.), • Distills data from project specifications, contract drawings, and relevant code sections to prepare project-specific inspection/test scripts of multidisciplinary systems, or client-requested method of procedures, and/or system level testing documentation., • Directs equipment and system level testing to confirm operation in accordance with project requirements., • Records results of testing and technical description of discrepancies., • Reads, understands, and interprets industry standards, guidelines, and certification program (e.g. ASHRAE, LEED, WELL, etc.) requirements., • Oversees and confirms project processes are in place to meet industry certification programs., • Approves review of equipment performance data (e.g. BMS trend data, field measurements, etc.) and identified normal and abnormal operational characteristics., • Conducts project site surveys and records technical information., • Has a firm understanding of local Building Code (BC) requirements Minimum Requirements • Bachelor's degree in Engineer or related discipline from an ABET accredited program., • Minimum of 4+ years of experience., • Specific dedicated Retro-Cx experiences, LL87 experience, • Holds a professional certification title (LEED, CCP, CEM, etc.)., • Has understanding of all trades scope of project., • Has advanced understanding of firm/team production capacity in establishing and maintaining project deliverables., • Has a fundamental understanding of miscellaneous design software tools applicable to MEP design (such as Revit and AutoCAD)., • Has advanced understanding of Energy and Building Codes as they relate to Field services. What We Offer • Our employees are our greatest strength. We invest in our people and support their needs., • Hybrid workplace offering the flexibility to work both from home and the office., • Comprehensive benefits package including 401k employer match., • Paid time off (PTO), paid parental leave and inclusive holidays., • Training and professional development courses through JB&B University., • Multiple employee resource groups., • Volunteer program. Estimated compensation range: $100,000 - $115,000 base salary per year Jaros, Baum & Bolles is an equal-opportunity employer. All qualified candidates will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Powered by JazzHR QJxGCriwWA

Job Description OVERVIEW: The Resident Relocation Coordinator is a key member of the Relocation team. The Resident Relocation Coordinator is responsible for overseeing the daily relocation tasks required at multiple sites while working closely with residents to prepare and assist them with all required relocation activities. The position involves regular communication with clients, managing third-party vendors, including cleaners, moving and pest control companies, and data collection and tracking. A positive attitude and a solutions-based approach are expected when providing relocation services to clients and residents. The Resident Relocation Coordinator represents HOU at company events and helps move our mission and reputation forward. RESPONSIBILITIES • Conduct site setup activities, including the arrangement of office, relocation files organization, identification of vendors, and off-site relocation units., • Participate in surveying residents to understand their relocation needs and relocation preferences., • As part of the assessment process, take an inventory of tenant belongings and furniture, taking note of large furniture, infestation, clutter, and hoarding issues., • Participate in and facilitate resident and community meetings and drop-in sessions to discuss the relocation process and resident relocation rights and benefits., • Prepare and distribute appropriate notices to affected households regarding the relocation program and ensure proof of resident receipt for notices are received and on file as required., • Provide relocation counseling and assistance in compliance with applicable Federal, State, or local regulations., • Implement relocation policies as outlined in the approved relocation plan., • Serve as a liaison between HOU, property management, clients, and residents., • Provide weekly and monthly reports to clients, the project manager, and the development team., • Regularly update and maintain relocation files, database, lottery list, and relocation tracking reports., • Create an agenda for weekly relocation meetings, take minutes of each meeting, and distribute them to the team within 48 hours of the meeting., • Conduct pre-inspection of units to ensure they meet decent, safe, and sanitary requirements before offering them as a comparable relocation unit., • Notify residents of the move-in date and provide ongoing contact and support to ensure they are prepared to move., • Check-in with residents at least 30 days before moving and follow up weekly three weeks before the moving date. Conduct final check-in 72, 48, and 24 hours before the moving date., • If needed, provide packing supplies, tips, demonstrations, and assistance., • Assist with utility disconnection and reconnection and completion of the change of address forms (if applicable) for households needing assistance., • Schedule, coordinate and supervise moves and other move-related tasks, including pest inspection and unit turnover as needed., • Work closely with construction, property management, development, and moving contractors to ensure residents vacate their units per the relocation schedule, surrender keys to the property management, and units are properly secured., • Implement procedures for minimizing resident property damage, including inventorying furniture and taking photos or video, and serve as the initial point of contact regarding resident claims of damage or loss. In the event of property damage or missing belongings, serve as a liaison between the resident and moving company to facilitate timely resolution of the claim., • Interface with residents' families, friends, or social services providers to ensure seamless delivery of services and address relocation challenges., • Serve as an HOU representative to local, state, federal, housing agencies, and community groups., • Participate in weekly supervision and scheduled site meetings with the Project Manager/Assistant Project Manager., • Ensure relocation files contain required documentation and the data-tracking system is updated regularly., • Bachelor's Degree is preferred., • Experience in relocation services, social services, customer service, or other similar fields preferred., • Provide verbal interpretation and written translations if the resident population requires communication in specific languages., • Must have excellent customer service, interpersonal, verbal, and written communication skills., • Able to work with diverse populations and communicate effectively with numerous stakeholder groups, including staff, clients, and residents., • Must be able to multitask and prioritize responsibilities and work under strict time constraints on various projects., • Ability to lift up to 20 lbs, work in adverse weather conditions, and stand for extended periods of time., • Must be able to walk up to 4 miles per day and ascend up to four flights of stairs at a time., • Able to work some evenings and Saturdays., • Self-directed and able to work independently., • Have a propensity to learn and take on more tasks or responsibilities., • Knowledge of Microsoft Office and Google Suite as well as database applications., • Be a creative problem-solver., • Excellent organizational skills., • Must be able to pass a pre-employment criminal background screen., • Reliable transportation., • Valid driver's license. The ideal Resident Relocation Coordinator will possess the following additional skills: • A high degree of empathy., • Organized and detail-oriented with the ability to prioritize multiple requests., • Flexibility and adaptability as challenging situations arise., • Ability to maintain a calm atmosphere under pressure and stressful situations., • Willingness to learn and receive feedback., • Diversity and cultural competency are highly valued. HOU offers a competitive salary and a comprehensive benefits package, including health, health reimbursement account (HRA), FSA, life, vision, dental, disability insurance, professional development support, paid time off and sick leave, and a 401K retirement plan. HOU is an Equal Opportunity Employer. EEO Statement: We are an equal opportunity employer and equal opportunity housing provider. We do not discriminate on the basis of race, color, religion, sex, disability, familial status, or national origin. • Must be able to pass employment criminal background screening

Job Description Chief Engineer Needed for Luxury Residential Rental Properties in New York City We are searching for a Luxury Real Estate Chief Engineer in Brooklyn, New York for 5 towers housing nearly 850 residential units including both Condominiums and Rental Apartments. The ideal candidate will have diverse experience in organizing and safety concepts for the buildings’ maintenance and crew operations. A FSD Certification is required for this position. Living on premises is required in a brand new luxury 2 bedroom apartment provided by the company. The Qualifications of the Luxury Real Estate Chief Engineer are as follows: • Minimum of 10+ years of extensive experience in multi-Family / Residential hi-rise rental Building maintenance., • Must have FSD Certification, • HVAC Experience required, • Must be proficient with building mechanical systems and technology, • Must be able to lift and/or carry object of 25 pounds or more, • Requires walking and standing to a significant degree, • Strong leadership skills and 10+ years of managing large teams of people, • Must have experience working in the property management industry, both with residential rentals and condominiums, • Chief Engineer will have senior oversight of the rental property and maintenance operations, • Will be responsible for all preventative maintenance programs for all mechanical and common elements on the property, including but not limited to refrigeration, heating, cooling, water treatment, plumbing, emergency management, fire life safety systems, etc., • Meeting and working with Construction supervisors to discuss different phases of construction, working through issues, punch lists and ensure all plans, charts, warranties have been received, • Responsible for inspection of common area, and back of house mechanical and electrical rooms, • Participation in the development of departmental budgets, • Review, monitor and report on opportunities for Energy, Preventive, • Maintenance, and/or other cost-saving measures, • Works with General Manager, Property Managers and Superintendents., • Oversees and manages all building maintenance staff, • Maintains calm demeanor in emergency situations, • Attends all staff meetings, construction, ownership, etc., • General oversight of retail build outs, including meeting with General Contractors and tenants, • Maintain all equipment in accordance with local codes, restrictions, and licensing requirements, • Overseeing all third party vendors and services purchased, including, supplies, electrical,, • plumbing, testing, etc., • Monitors utility consumption and ensuring all savings measures are being used, • Troubleshoot and resolve technical problems, ensuring minimal downtime and disruption of services, • Maintaining historical and current preventative maintenance logs for the property, • Procure and review copies of architectural, mechanical, and electrical blueprints for all tenant remodeling for the purpose of ensuring actual work conforms to approved blueprints, • Ensure all work orders are assigned, completed, commented on and closed in a timely manner, escalating when needed., • Create and Maintain vendor/contractor list, ensuring all COIs and Contracts are up to date, • Contacts vendor to submit bids for new projects, contracts, outsourced repairs, etc., • Works with Superintendents to ensure work orders are completed Competitive Salary, potential bonus based on performance and weekly insurance allowance to the right candidate. Rent Free Luxury 2 Bedroom Apartment on the premises. Key Words: Brooklyn, NY, Luxury Residential, Rental and Condo Properties, Chief Engineer, Maintenance Engineer, planning, cost reducing implementation, organized Company DescriptionBest Headhunters is a team-oriented search firm who provides a unique, hands-on caring approach in helping a candidate match their experience with the right job opportunity. There is never a fee to the candidate for our representation. Plus, you will receive the benefit of our extensive experience and our long-term relationships with many of America's leading companies. We offer career coaching and will assist you every step of the way in your goal to advance your career. For additional information on Best Headhunters and our ever-expanding employment opportunities, visit our Web site at: . We encourage candidates to be pro-active, especially in light of today's uncertain business environment in which mergers and downsizing are a common reality. This underscores the importance of placing your career in the hands of a search firm with your best interests at the core of its daily mission.Best Headhunters is a team-oriented search firm who provides a unique, hands-on caring approach\r\nin helping a candidate match their experience with the right job opportunity. There is never a fee to\r\nthe candidate for our representation. Plus, you will receive the benefit of our extensive experience\r\nand our long-term relationships with many of America's leading companies.\r\nWe offer career coaching and will assist you every step of the way in your goal to advance your\r\ncareer. For additional information on Best Headhunters and our ever-expanding employment\r\nopportunities, visit our Web site at: . We encourage candidates to be\r\npro-active, especially in light of today's uncertain business environment in which mergers and\r\ndownsizing are a common reality. This underscores the importance of placing your career in the\r\nhands of a search firm with your best interests at the core of its daily mission.

Job DescriptionWhy Charlie Health? Millions of people across the country are navigating mental health conditions, substance use disorders, and eating disorders, but too often, they're met with barriers to care. From limited local options and long wait times to treatment that lacks personalization, behavioral healthcare can leave people feeling unseen and unsupported. Charlie Health exists to change that. Our mission is to connect the world to life-saving behavioral health treatment. We deliver personalized, virtual care rooted in connection—between clients and clinicians, care teams, loved ones, and the communities that support them. By focusing on people with complex needs, we're expanding access to meaningful care and driving better outcomes from the comfort of home. As a rapidly growing organization, we're reaching more communities every day and building a team that's redefining what behavioral health treatment can look like. If you're ready to use your skills to drive lasting change and help more people access the care they deserve, we'd love to meet you. About the Role The Compliance Manager will oversee compliance operations in the state(s) assigned. The ideal candidate will have experience in managing day to day compliance operations across several locations and multiple TJC accredited offices/facilities. The Compliance Manager will work closely with the Care Delivery Team, Clinical Team, and the Personnel Compliance Team to ensure ongoing compliance in relation to onboarding of employees, maintenance of employee personnel files and clinical documentation. Our team is comprised of passionate, forward-thinking professionals eager to take on the challenge of the mental health crisis and play a formative role in providing live-saving solutions. We are looking for a candidate who is inspired by our mission and excited by the opportunity to build a business that will impact millions of lives in a profound way. Travel Required Please note that this role will require on average about 2x travel per month to office locations across the U.S. Responsibilities • Ensure each office in assigned state(s) are operating within company policy, state licensing regulations and The Joint Commission Standards., • Ensure that all staff in assigned state(s) are onboarded within company policy, state licensing regulations and The Joint Commission Standards., • Ensuring employee files are current and in compliance., • Ensuring proper operating procedures are in place for compliance relating to employee onboarding and client admissions, clinical documentation, treatment, and discharge., • Maintain office space compliance for the assigned state(s), • Ensuring routine environment of care and safety requirements are in compliance., • Host and organize site visits/surveys/inspections; travel required., • Assist with completing post-survey written corrective actions plans for submission to surveying entities and monitor company progress on these plans., • Write individualized Policies and Procedures and associated crosswalks as needed., • Assist to ensure that ongoing regulatory and accreditation requirements such as internal inspections, written assessments, and emergency drills are completed on time., • Attending and actively participating in Quality Committee meetings and assure meetings are documented per requirements., • Licensing, Accreditation, and Growth to the state(s) assigned., • Obtain initial facility licenses for Mental Health and Substance Use Disorder Outpatient Treatment, • Ensure that a staff development plan that meets all local, state, and national requirements is in place for the assigned state(s), • Working with the Clinical Training Team to ensure that all staff training is completed and in compliance., • Assist to ensure all licensing requirements are being addressed/fulfilled., • Assist with all aspects of compliance program and coach team as to best policies and procedures., • Coordinate compliance training and investigate compliance issues as requested., • Work with Recruiting and Personnel Compliance to provide education on specific qualifications for positions that are required by regulatory agencies., • Assist with monitoring and documenting facility incidents, including post-incident analysis, including Root Cause Analysis for any Sentinel EventsRequirements, • Bachelor's degree in healthcare/ human services or equivalent career experience (Legal experience preferred), • 5 years of experience working in a behavioral healthcare or healthcare setting, • 2 years of experience managing a team of 3 or more reports, • TJC Behavioral Healthcare experience, • State regulatory inspection survey experience: Being the DRI for leading surveys and organizing survey preparation, • Strong interpersonal, relationship-building and listening skills, with a natural, consultative style, • Ability to energize, communicate, and build rapport at all levels within an organization, • Strong project management skills, with a demonstrable ability to corral and manage details in a fast paced, fluid environment The total target base compensation for this role will be between $84,000 and $108,000 per year at the commencement of employment. In addition to base compensation, this role offers a target performance-based bonus. The target total cash compensation range, including potential bonus, will be between $84,000 and $118,000 per year. Please note, pay will be determined on an individualized basis and will be impacted by location, experience, expertise, internal pay equity, and other relevant business considerations. Further, cash compensation is only part of the total compensation package, which, depending on the position, may include stock options and other Charlie Health-sponsored benefits. #LI-REMOTE Our Values • Connection: Care deeply & inspire hope., • Congruence: Stay curious & heed the evidence. Please be cautious of potential recruitment fraud. If you are interested in exploring opportunities at Charlie Health, please go directly to our Careers Page: . Charlie Health will never ask you to pay a fee or download software as part of the interview process with our company. In addition, Charlie Health will not ask for your personal banking information until you have signed an offer of employment and completed onboarding paperwork that is provided by our People Operations team. All communications with Charlie Health Talent and People Operations professionals will only be sent from @charliehealth.com email addresses. Legitimate emails will never originate from gmail.com, yahoo.com, or other commercial email services. Recruiting agencies, please do not submit unsolicited referrals for this or any open role. We have a roster of agencies with whom we partner, and we will not pay any fee associated with unsolicited referrals. At Charlie Health, we value being an Equal Opportunity Employer. We strive to cultivate an environment where individuals can be their authentic selves. Being an Equal Opportunity Employer means every member of our team feels as though they are supported and belong. We value diverse perspectives to help us provide essential mental health and substance use disorder treatments to all young people. Charlie Health applicants are assessed solely on their qualifications for the role, without regard to disability or need for accommodation. By submitting your application, you agree to receive SMS messages from Charlie Health regarding your application. Message and data rates may apply. Message frequency varies. You can reply STOP to opt out at any time. For help, reply HELP.

Job DescriptionBe Part of a Team That Truly Makes a Difference At Surgical Solutions, a healthcare solutions company specializing in mission-critical support for hospital operating rooms and sterile processing departments, we’re driven by a simple but powerful mission: to improve the lives of the patients and healthcare teams we serve. Joining us means more than just a job — it’s about being part of a supportive, innovative culture where your work matters. Here, you’ll grow, collaborate, and help create better outcomes every day. If you’re looking for a place that values your passion and purpose, Surgical Solutions is ready for you. Duties & Responsibilities Operating Room Support * Set a high standard of performance for staff and peers. * Understand surgical procedures and anticipate the needs of staff and surgeons to ensure exceptional service. * Pre-Operative Setup: * Confirm all video and surgical equipment is fully functional. * Arrange monitors and equipment according to surgeon preferences. * Intra-Operative Support: * Verify proper connection and operation of all necessary equipment. * Address supply needs promptly and assist OR staff as requested. * Post-Operative Turnover: * Collect and inventory instruments and equipment for cleaning and sterilization. Instrument and Equipment Management * Maintain strict standards for decontamination, inspection, assembly, wrapping, and sterilization of surgical instruments. * Ensure no instruments remain at shift end. * Manage laparoscopic equipment, including routine maintenance and coordinating repairs. * Keep surgeon preference cards current and accurate. Professional Conduct and Availability * Provide consistent, high-quality service while fostering professional relationships with OR staff. * Demonstrate punctuality and flexibility; available for on-call and rotational shifts including weekdays, weekends, and holidays. Technology Utilization * Learn and effectively utilize all required technologies per company policy. * Use company devices to access systems such as ADP, Outlook, Concur, Slack, and SCMP as needed. Other Responsibilities * Support team and hospital operations by performing additional duties as assigned. * Manage company property responsibly; loss or damage may result in repayment. Skills & Abilities * Reliable with consistent on-site attendance; able to work any day Sunday–Saturday including 24/7 rotational coverage. * Capable of working under high-stress conditions and making critical decisions in emergencies. * Build positive relationships with clients and colleagues while maintaining professionalism. * Thrive both independently and as a team player with respect and consideration for others. * Adapt quickly to a fast-paced hospital environment involving exposure to bloodborne pathogens, chemical disinfectants, and infectious materials. Physical Demands * Perform tasks involving bending, squatting, kneeling, crawling, and maneuvering heavy equipment. * Stand for extended periods and lift or carry items weighing up to 50 pounds (or more with assistance). * Meet vision and hearing requirements, including color recognition, essential for job duties. * Wear personal protective equipment (PPE) such as gloves, gowns, and eye protection as required. Qualifications Education * High school diploma or GED required. Certifications * Certified Registered Central Sterile Technician (CRCST) or Certified Surgical Technician preferred. * CRCST must be obtained within 120 days of hire (some accounts may require this upon hire). Experience * Preferred: One year of OR and/or Sterile Processing Department (SPD) experience. * Required: 2–5 years of face-to-face customer service experience. Additional Requirements * Strong communication skills with the ability to anticipate and respond quickly and accurately. * Availability for 24/7 hospital coverage, including rotational shifts on weekdays, weekends, and holidays. * COVID-19 vaccination is required for this position.

Job Description Job Title: Fire Protection Technician Location: Newark Airport Terminal A Department: Facilities Maintenance Job Summary: The Fire Protection Technician plays a key role within the Facilities Management team to support the Fire Protection Systems within Terminal A. The Facilities Maintenance Fire Protection Technician will maintain fire protection systems and be the first investigator for all fire alarms as well as the primary point of contact for both internal and external customers. You will be part of the Munich Facilities Maintenance department operating at Newark Airport Terminal A twenty-four hours a day, seven days a week, and will work within the facilities maintenance department and our contractors to maintain the terminal. Responsibilities: • Perform monthly, quarterly, semi-annual & annual flow testing of fire protection systems and backflow preventors as per NFPA (see below associated NFPA), and perform onsite emergency troubleshooting and repairs of the Terminal A fire alarm and protection systems, identifying code and non-conformance issues:, • Conducting regular inspections and tests of the fire protection systems to ensure they are functioning correctly and in compliance with NFPA standards. You will also perform emergency troubleshooting and repairs as needed, identifying and addressing any code violations or non-conformance issues., • Act as a first investigator for fire alarms/fire protection systems within Terminal A and operate the fire protection and Fire Alarming systems and software when needed:, • This involves being the initial responder to any fire alarms or issues with the fire protection systems. You will assess the situation, determine the cause of the alarm, and take appropriate action to resolve the issue. This may include operating the fire protection systems and FACP to ensure the safety of the terminal., • Strong problem solving and decision-making abilities and able to work well with other team members and the terminal stakeholders., • Read and interpret blueprints, submittals, and operational/product manuals:, • Ability to understand and interpret technical documents, including blueprints, submittals, and product manuals, to effectively maintain and troubleshoot the fire protection systems., • Ensure that work orders for planned FLS maintenance are in place and stakeholders are informed:, • This involves creating and maintaining schedules for planned maintenance activities, ensuring that all necessary work orders completed, and keep stakeholders informed of the status of maintenance activities and deficiencies., • Monitor the CMMS system (Maximo) to ensure all the FLS work orders are completed on time:, • Overseeing the execution of maintenance work orders, receiving and reviewing reports on completed work, and ensuring that all information is accurately logged into the CMMS system (Maximo)., • Ensure events/incidents are logged into the CMMS system, attended to, and resolved as per SLAs, using the standard work order procedures, • Inform, communicate, and collaborate if there is an event needing other stakeholders’ involvement:, • Requires effective communication and collaboration with other stakeholders when an event or issue requires their involvement., • Monitor and oversee that planned and ad-hoc inspections are taking place:, • Includes ensuring that both scheduled and unscheduled inspections and work are conducted as required to maintain the fire protection systems., • Overseeing the performance of Fire Life Safety subcontractors in carrying out planned maintenance and reactive management activities and coordinating with management to address any issues or concerns., • Monitor all FLS KPIs and SLAs for compliance:, • This involves tracking key performance indicators (KPIs) and service level agreements (SLAs) to ensure compliance with established standards and performance metrics., • Prepare documentation for events for pre and post stakeholder meetings, • Issue shift/daily reports as required:, • This involves preparing and issuing reports on a daily or shift basis to provide updates on maintenance activities, issues, and performance metrics., • Monitor Cerberus Danager Management System & Building Management System(s) status and take appropriate action to address any received faults through management of corrective work order:, • This involves monitoring the status of the Fire Alarm Software & Building Management Systems (BMS, SCADA and taking appropriate action to address any faults or issues that arise, including issuing and managing corrective work orders., • Perform building inspections including facilities maintenance and life safety audits., • Shift work required and will cover other shifts for PTO/vacations, as required:, • This requires flexibility to work different FM positions and shifts as needed, including covering for other team members during paid time off (PTO) or vacations.Qualifications:, • NICET Level II/NICET Level III Certification is preferred., • Familiarity with NFPA Requirements for Fire Protection & Life Safety Systems., • Minimum of 3 years of experience in the testing, inspection, and maintenance of fire sprinklers/clean agent, fire extinguishers, and related equipment., • Back-flow certification is preferred and must be able to obtain S12, S13, and S14 certification within the first six months if you don’t already have it., • Be able to sit, stand, walk, bend, climb stairs for extended periods, and lift at least thirty (30) lbs., • Possess a GED, high school diploma, or equivalent. 1. Fire Alarm & Detection Systems • NFPA 14 – Standard for the Installation of Standpipe and Hose Systems, • NFPA 15 – Standard for Water Spray Fixed Systems for Fire Protection, • NFPA 25 – Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems, • NFPA 291 – Standard for Fire Flow Testing and Marking of Hydrants3. Special Fire Suppression Systems, • NFPA 17 – Standard for Dry Chemical Extinguishing Systems, • NFPA 17A – Standard for Wet Chemical Extinguishing Systems (Common in kitchen suppression systems.), • NFPA 30 – Flammable and Combustible Liquids Code (Includes fire protection requirements for liquid storage.), • NFPA 96 – Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations (Covers kitchen hood suppression systems.), • NFPA 2001 – Standard on Clean Agent Fire Extinguishing Systems (Covers FM-200, NOVEC 1230, and other gas-based suppression systems.)4. Portable Fire Extinguishers, • NFPA 72 – National Fire Alarm and Signaling Code (Also listed under Fire Alarm Systems.) Powered by JazzHR abh1DYYlpl

Job Description First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. This position will perform routine and some non-routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under minimal supervision. Handles more advanced issues and problems and may refer more complex issues to higher-level staff. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis. • Job DescriptionMajor Responsibilities, • Ensure vehicles are maintained and safe for our customers by performing limited repairs with moderate supervision on basic and advanced maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under moderate supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers, • Assist Tech III with preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove and replace engine, transmission and differential assemblies with Maintenance Technician III supervision., • Diagnoses and performs accurately all phases of vehicle and equipment repair under moderate supervision., • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Assist with road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Cleans vehicles as requested or required, • Other responsibility as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 3 ASE within 12 months of hire) Minimum Experience or Skills Required • Intermediate mechanical aptitude and 3 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Intermediate problem-solving ability, • Intermediate computer skills, • Comfortable using hand tools, • Strong customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job DescriptionSalary: $70,000-$75,000 annual base salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development". How you'll get to contribute: We are seeking a dedicated and skilled Geotechnical Engineer to join our growing Transportation and Infrastructure division. In this role, you will be responsible for sampling, inspecting, testing, and condition services of construction materials that are either existing or under construction at various Port Authority of New York and New Jersey (PANYNJ) facilities. Work schedule varies according to job assignments and/or contractors schedule. Position may require night work, weekends, and some holidays. Location: New York City Metropolitan Area (Including Northern New Jersey) mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) What you'll get to do: • Provide quality inspection services to ensure conformance to project specifications and applicable codes, • Perform Quality Assurance (QA) testing in accordance with contract specifications using a nuclear density gauge, • Ensure that the drilling firm contracted by the Authority carries out its work in accordance with contract specification, • Inform the Authority of any unsafe condition discovered at any time during the course of the work, • Ability to document daily inspections and various other reports., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Attend meetings and conferences as needed. Who you are: • Required:, • Bachelors degree in Biological Engineering, Chemical Engineering, Civil Engineering, Construction Engineering, Geological Engineering, Materials Engineering, Structural Engineering, Transportation Engineering, or similar, • 2+ years of relevant experience, • Must be able to lift 75 lbs., • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Valid drivers license and willingness to travel to various project sites within New York Metro Area., • Preferred:, • Certifications/Trainings:, • OSHA 30, • Nuclear Gauge Safety Training certification, • Must meet the training requirements of 29 CFR 1910.120 (Hazardous Waste Operations and Emergency Response)., • National Institute for Certification in Engineering Technologies (NICET) in Geotechnical Engineering Technology Level 1 for earthworks, • National Institute for Certification in Engineering Technologies (NICET) in Geotechnical Engineering Technology Level 2, • Possess or ability to obtain Secure Worker Access Consortium (SWAC) membership What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate in mcfas family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfa contributes up to 75% shared cost, not to exceed $700 per month. Companypaid life insurance plan (up to $100,000 per employee). * Company paid short-term and long-term disability insurance. Retirement • You are eligible to participate in Company retirement plan (401k) on first day of employment with mcfa. mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities.

Job DescriptionSalary range: $130K - 150K base with 20% bonusWork setting: On-site (5 days a week)About COGS' Client: A leading energy company is seeking a highly motivated and dedicated professional to join their team as an Instrumentation and Controls/Electrical Supervisor. The role involves supervising, directing, and coordinating the daily activities of I&C technicians in the inspection, repair, and maintenance of mechanical, electrical, and instrumentation systems, along with their associated structures.Key responsibilities include: • Conduct system condition assessments to identify and document deficiencies, initiating corrective actions as needed., • Utilize industry-standard software and analysis tools to develop performance and availability improvement plans., • Support project planning and execution, including scope review, design requirements, compliance checks, and acceptance testing., • Plan and assist with major component overhauls and system outages., • Perform root cause analysis of forced outages and component failures, driving resolution., • Coordinate with and monitor activities of both internal and external equipment and service providers., • Document and address unplanned changes to the design basis, ensuring proper corrections are implemented., • Create or review acceptance test plans and oversee testing procedures to ensure compliance., • Maintain and update design basis documentation to reflect current standards and practices., • Develop detailed reports and presentations to inform capital planning decisions and guide management., • Offer engineering support to station management, addressing operational and technical challenges., • Represent the organization in committees, contributing to discussions on various issues., • Maintain clear and effective communication channels with internal and external stakeholders., • Perform additional tasks as required.Qualifications:, • 5+ years of technical supervisory or engineering experience, including project management, planning, and administration, with 4 years of supervisory experience being essential., • 5+ years of experience in an industrial maintenance role within a large process industry (such as a refinery, power plant, or military/merchant marine)., • Hands-on experience with DCS, PLC, BMS, low voltage switchgear, breakers, power cables (up to 480V), UPS, and MCCs., • Proficient in equipment sizing and analysis calculations, life cycle management, protection schemes, relay settings, and PLC programming., • In-depth knowledge of plant control system design, construction, operations, maintenance, testing, or analysis within the utility, oil & gas, or marine propulsion industries., • Demonstrated leadership skills with a track record of direct supervision, including the ability to effectively manage and motivate teams., • Either possesses or is capable of acquiring comprehensive knowledge of industry codes, standards, procedures, and specifications., • Experience with supervising a unionized workforce is considered advantageous., • A Bachelor’s Degree in Engineering or a related field is preferred.To apply for this position, please complete the application form and share an updated resume. We will review all applications and contact the most qualified candidates for an interview.

Job Description First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. * This position will perform routine and some non-routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under minimal supervision. Handles more advanced issues and problems and may refer more complex issues to higher-level staff. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis. $23.50/hr Ensure vehicles are maintained and safe for our customers by performing limited repairs with moderate supervision on basic and advanced maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components. * Perform mechanical repairs under moderate supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs. * Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers * Assist Tech III with preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage * Remove and replace engine, transmission and differential assemblies with Maintenance Technician III supervision. * Diagnoses and performs accurately all phases of vehicle and equipment repair under moderate supervision. * Notify supervisor of potentially dangerous equipment and corrective action taken * Evaluates completed work prior to release and seeks approval where required * Assist with road calls and emergency services as necessary * Adhere to FirstGroup standards, policies and procedures * Moves vehicles safely between job and work area * Repair and maintain all shop equipment * Cleans vehicles as requested or required * Other responsibility as requested or required Minimum Education or Certifications Required * High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred) * Class B CDL with passenger endorsement required (or expected within 3 months of hire) * State inspection license (if required) * ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 3 ASE within 12 months of hire) Minimum Experience or Skills Required * Intermediate mechanical aptitude and 3 years of automotive or diesel repair experience (preferred) or equivalent education and experience * Adhere to standards set by state DOT for motor vehicle inspections and safety standards * Valid driver's license * Intermediate problem-solving ability * Intermediate computer skills * Comfortable using hand tools * Strong customer service skills and communication skills * Ability to work independently as well as part of a team * Maintain an organized shop and clean work environment * Regular, predictable, full attendance is an essential function of the job * Making sure vehicles are maintained and safe for our customers * Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions * Maintenance Shop environment with dust, dirt and grease conditions * Ability to work under all weather conditions * Ability to lift a minimum of 50 pounds * Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job DescriptionWhy Charlie Health? Millions of people across the country are navigating mental health conditions, substance use disorders, and eating disorders, but too often, they're met with barriers to care. From limited local options and long wait times to treatment that lacks personalization, behavioral healthcare can leave people feeling unseen and unsupported. Charlie Health exists to change that. Our mission is to connect the world to life-saving behavioral health treatment. We deliver personalized, virtual care rooted in connection—between clients and clinicians, care teams, loved ones, and the communities that support them. By focusing on people with complex needs, we're expanding access to meaningful care and driving better outcomes from the comfort of home. As a rapidly growing organization, we're reaching more communities every day and building a team that's redefining what behavioral health treatment can look like. If you're ready to use your skills to drive lasting change and help more people access the care they deserve, we'd love to meet you. About the Role Our Specialist, Onboarding Compliance will be directly responsible for HR compliance work related to our clinical staff. Our clinical workforce is expanding quickly, and each new clinical hire requires a myriad of operational and compliance tasks to be completed prior to their first day of care. The Specialist, Onboarding Compliance will shepherd new hires through these tasks, ensuring that they're in-compliance prior to their first day of care. Clinical hires also have complex personnel files, given that they deliver care in multiple states and are reviewed regularly by state agencies. The Specialist, Onboarding Compliance will build the initial personnel file and work collaboratively with multiple departments to assure that files are complete and ready for inspection at any time. Ultimately, if you are excited about navigating and influencing complicated, operational processes related to onboarding compliance, this role may be for you. We're excited to bring on an execution-oriented, highly motivated individual that wants to apply their HR and compliance skills to complex problems and on a high-impact team. We're a team of passionate, forward-thinking professionals eager to take on the challenge of the mental health crisis and play a formative role in providing life-saving solutions. If you're inspired by our mission and energized by the opportunity to increase access to mental healthcare and impact millions of lives in a profound way, apply today. Responsibilities • Manages personnel file activity from "cradle to grave" including assembling, maintaining, and deactivating files as required., • Assure that all regulatory requirements are met including:, • Complete background checks at hire and as required, including fingerprinting and state registry checks., • Job descriptions are accurate and present in each file, with all required signatures completed., • Assures all required new employee orientation is complete and documented, • Complete health screening/testing/immunizations are completed for employees per state and Joint Commission requirements, • Verification of required credentials, education, and experience for all new employees, • Documentation of all trainings required by external agencies, both at hire and ongoing, • Completion of initial and periodic competency assessments for all client facing staff, • Completion of periodic performance reviews for all staff, • Works seamlessly with recruiting, onboarding, leadership, regulatory and HR operations departments., • Conducts periodic audits of employee file data for timeliness and completeness., • Maintains strict confidentiality when managing sensitive employee and contractor information., • Escalates issues promptly and with diplomacy and discretion., • Cultivates positive interpersonal relationships with clinical and administrative leadership as well as external partners.Requirements, • Ability to come onsite 4 days/week to the NYC-Office (Union Square)., • Bachelor's Degree required or equivalent in experience., • 1 year HR experience required., • HR experience in a healthcare setting is highly desirable., • Excellent verbal and written communication skills., • Ability to maintain strict confidentiality., • Detail-oriented., • Outside the box thinker; excellent at problem solving., • Microsoft Office proficiency., • Strong interpersonal, relationship-building and listening skills, with a natural, consultative style. The total target base compensation for this role will be between $53,000 and $70,000 per year at the commencement of employment. Please note, pay will be determined on an individualized basis and will be impacted by location, experience, expertise, internal pay equity, and other relevant business considerations. Further, cash compensation is only part of the total compensation package, which, depending on the position, may include stock options and other Charlie Health-sponsored benefits. Our Values • Connection: Care deeply & inspire hope., • Congruence: Stay curious & heed the evidence. Please be cautious of potential recruitment fraud. If you are interested in exploring opportunities at Charlie Health, please go directly to our Careers Page: . Charlie Health will never ask you to pay a fee or download software as part of the interview process with our company. In addition, Charlie Health will not ask for your personal banking information until you have signed an offer of employment and completed onboarding paperwork that is provided by our People Operations team. All communications with Charlie Health Talent and People Operations professionals will only be sent from @charliehealth.com email addresses. Legitimate emails will never originate from gmail.com, yahoo.com, or other commercial email services. Recruiting agencies, please do not submit unsolicited referrals for this or any open role. We have a roster of agencies with whom we partner, and we will not pay any fee associated with unsolicited referrals. At Charlie Health, we value being an Equal Opportunity Employer. We strive to cultivate an environment where individuals can be their authentic selves. Being an Equal Opportunity Employer means every member of our team feels as though they are supported and belong. We value diverse perspectives to help us provide essential mental health and substance use disorder treatments to all young people. Charlie Health applicants are assessed solely on their qualifications for the role, without regard to disability or need for accommodation. By submitting your application, you agree to receive SMS messages from Charlie Health regarding your application. Message and data rates may apply. Message frequency varies. You can reply STOP to opt out at any time. For help, reply HELP.

Job Description First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. This position will perform routine and non-routine maintenance, diagnostic and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. Performs work under minimal supervision. Handles more complex problems and can resolve independently. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I and/or Technician II. Also, may act as a Shift Foreman and may receive a shift premium.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$21.00/hr • Job DescriptionMajor Responsibilities, • Ensure vehicles are maintained and safe for our customers by performing limited repairs with minimal supervision on both basic and complex maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under minimal supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers., • Diagnoses and performs accurately all phases of vehicle and equipment repair under minimal supervision. May perform diagnostic tests utilizing a computer and manufacturer's software to determine mechanical defects., • Lead preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove, overhaul and reinstallation of mechanical components with minimal Tech in Charge supervision, • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Leads road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Other responsibilities as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program (expected to have 6 ASE within 6 months of hire) Minimum Experience or Skills Required • Advanced mechanical aptitude and 5 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Advanced problem-solving ability, • Advanced computer skills, • Comfortable using hand tools, • Excellent customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job Description Currently seeking a qualified candidate for Electrical Construction Inspector Position, with 7 to 10 years’ or more experience to join our construction management team working on a NYCDEP Construction project in the Queens, NY. Construction Inspector will utilize their knowledge of electrical codes and prior experience in construction inspection, QA / QC and report documentation, on various construction and/or reconstruction projects for municipal water and wastewater treatment plant, infrastructure, energy or manufacturing facilities or other heavy construction projects. Inspector will report to Resident Engineer and will perform daily construction electrical inspections, coordination, testing oversight, commissioning and verification of Contract Document compliance on High, Medium and Low voltage systems. Will also conduct inspection of instrumentation and controls, communications and security systems. Primary responsibilities will include but are not limited to: • Perform inspection of electrical installations, including detailed inspections of heavy utility and electrical distribution systems, underground conduit duct banks, and conduit systems ensuring conformance to Contract Documents., • Ensure all materials associated with electrical installations are in accordance with approved submittals and product data to ensure compliance with appropriate codes and specifications., • Interpret drawings and specifications., • Inspect and determine deviations from general compliance with Contract Documents., • Monitor all required field testing., • Document instances of material and/or installation non-compliance when necessary., • Advise the Resident Engineer and Contractor of conditions requiring correction., • Monitor and document contractor resource utilization (labor, materials and equipment) for field changes, and time and material work and assist with negotiation of basic field construction changes., • Attend a variety of construction meetings to administer the contract requirements; provide input and assist in interpreting specifications, drawings and other technical details., • Coordinate contractor activities with other prime contractors and owner’s activities., • Communicate all pertinent information to the construction and design project managers., • Work closely with the project’s electrical engineering design staff ensuring quality electrical installations., • Verify equipment and materials installation for payment purposes., • Maintain Payment Quantity documentation., • Perform mathematical calculations as necessary during inspection activities., • Prepare detailed daily activity and progress reports on e-Builder. Minimum Required Qualifications: 8 -10 years’ experience in the construction industry specializing in electrical installations, engineering or inspection. Associates Degree in Electrical Engineering Technology or related field of study or a HS Diploma along with Continuing Education Diploma or Certification in Electrical Construction related area. Certifications/Licenses - Ideal candidate would possess a New York State Journeyman Electrician License. Extensive knowledge and experience of National Electric Code, NFPA 70E Electrical Safety in the Workplace, electrical inspection practices and procedures. Ability to communicate effectively both orally and in writing. Ability to maintain effective working relationships owner, construction management staff and contractors, utility company representatives, regulatory agencies, and other public and private organizations. Able to prepare detailed record documentation of work in progress. Company DescriptionCertified Site Safety of NY LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Certified Site Safety of NY LLC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Certified Site Safety of NY LLC expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Certified Site Safety of NY LLC’s employees to perform their job duties may result in discipline up to and including discharge.Certified Site Safety of NY LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Certified Site Safety of NY LLC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.\r\nCertified Site Safety of NY LLC expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Certified Site Safety of NY LLC’s employees to perform their job duties may result in discipline up to and including discharge.

Job Description Hazen and Sawyer is seeking an entry-level engineer for a variety of water related assignments. Candidate will participate on design teams for water, wastewater, and/or stormwater projects. Project work may include initial studies, design and inspection of conveyance systems, inspection of stormwater infrastructure, design of wastewater treatment facility upgrades, design of water treatment facility upgrades, asset management, and/or design of green infrastructure. Field work and site visits from study or design through construction may be required. Strong verbal and written communication skills are required. Minimum professional qualifications are: • B.S. degree in environmental, civil, chemical, or mechanical engineering; or related engineering field (MS considered a plus), • EIT or plan to obtain, • Entry Level to 2 years of experience, • Candidate must possess excellent writing, communication, and interpersonal skills., • Must be proficient in all computer software typically used (e.g., Microsoft Word, Excel, PowerPoint, etc.)., • CADD and other software (GIS, etc.) skills will be considered a plus., • Candidate must have strong organizational skills. We provide a comprehensive benefits package which includes employer paid life insurance, 401k employer contribution (after 1 year of service), performance bonus, comprehensive family medical, dental and vision insurance, paid time off, holidays, short-term and long-term disability, paid parental leave (after 1 year of service), employee assistance and wellness programs. Typical starting pay range for this position depends on skills, experience, education and geographical location.

Job Description Firm looking for qualified MBE/WBE/SDVOB subconsultants to join our team in providing eligible candidates for work in the Port District. Concrete field/asphalt plant inspector Experience/Certification Level required: • ACI Concrete Field Testing Technician – Grade I, • NJSAT Asphalt Plant Level 1 & 2, • Radiation Safety-Nuclear Density Gauge Certified, • Efficient in the Marshall Method – ASTM C6926 - Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus, • Perform AASHTO Resource Annual Accreditation equipment calibrations., • Efficient in preparing samples for ASTM C4867 - Standard Test Method for Effect of Moisture on Asphalt Mixtures, • Able to cut asphalt cores and prepare for bulk specific gravity of in place densities in accordance with ASTM D2726 - Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive, • OSHA 10, • OSHA 30 Concrete field inspector/lab technician Experience/Certification Level required: • ACI Concrete Strength Testing Technician, • ACI Concrete Field Testing Technician – Grade I, • ACI Aggregate Base Testing Technician, • NJSAT HMA Construction Technologist, • Knowledge of AASHTO Resource Annual Accreditation for equipment calibration., • AASHTO Resource CCRL- Rebar measurements., • Knowledge of Portland cement testing, • Efficient in performing ASTM C1202 - Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration., • Efficient in performing ASTM C215 - Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens, • Efficient in performing ASTM C666 - Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, • Efficient in performing ASTM C157 - Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete, • OSHA 10, • OSHA 30

Job Description : KTA-Tator, Inc. (KTA) is a 100% employee-owned materials engineering firm, internationally recognized as a leading expert in corrosion protection and asset integrity. Five business units comprise the $40 million enterprise offering a broad range of coatings, steel, concrete fabrication and building envelope inspection, evaluation, and testing services in nearly every market and industry. KTA is recruiting full-time and part-time Certified Welding Inspectors (CWI) in the PA/NJ/NY area. All applicants must be willing to travel and work multiple shifts. Education and Experience: • High School Diploma or GED equivalent - required, • Current AWS CWI - required, • Bridge fabrication inspection experience - preferred, • MT & UT Level II - desirable, • AMPP (NACE) certification - desirable, • Good oral and written communication skills, • Decision making skills, • Reliable transportation, • Valid driver’s license, • Close, color, distance, depth vision and ability to adjust focus, • Ability to travel extensively and ability to work outside on occasion (including inclement weather), • Climbing, bending, crawling, and working in confined spaces and on uneven terrain, • Excellent work ethic, • Customer oriented, • Ability to meet deadlines, • Detail oriented, • Self-starter, • Works well in a team environment and independently Drug testing and criminal background and motor vehicle check will be conducted. Salary Range: $30-42/hour with comprehensive benefits package. Hourly rate is based on experience and certifications. KTA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. KTA is a Standing Firm Company. Elzly Technology Corporation (Elzly) is a wholly-owned subsidiary of KTA-Tator, Inc. (KTA). Links: Know Your Rights: Workplace Discrimination is Illegal The Family and Medical Leave Act Pay Transparency Nondiscrimination Provision Notice of E-Verify Participation E-Verify Right to Work We strive to make this site accessible to any and all users. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center and application process as a result of your disability or if you have Equal Employment Opportunity questions. To request an accommodation, please contact us at info@kta. Powered by JazzHR G89I4rlm2P

Job Description Are You Ready to Take Your Sales Career to the Next Level? DGA Security, the largest privately held security firm in NYC, is on the hunt for ambitious and experienced B2B Sales Consultants to join our elite sales team. If you're a high-energy, consultative sales professional with a passion for cutting-edge technology and protecting high-profile clients, this is your chance to make a huge impact—and get handsomely rewarded for it. Why DGA? We are the "Smart Security Company". For over 50 years, DGA has been the trusted security provider for iconic brands, luxury businesses, and high-risk industries nationwide. We don’t just sell security systems, we provide customized, high-tech solutions to protect what matters most. Our unparalleled full suite of Fire Systems Solutions includes: • Design & Installation, • Testing & Inspection, • 24/7 UL Listed, FDNY-approved monitoring centers What You’ll Be Doing • Drive New Business – Continually prospect and generate leads through market research, networking, and strategic outreach., • Consult & Customize – Meet with potential clients, assess their needs, and develop tailored fire & security solutions that provide real value., • Sell with Confidence – Leverage our state-of-the-art fire alarm technology and work with an in-house CAD team to create professional designs and proposals., • Own Your Success – Manage your pipeline, close deals, and maximize your earnings using Salesforce and other sales tools. What We’re Looking For ✔ Proven B2B sales experience in the NYC market (or other major cities). ✔ A Closer with a track record of exceeding sales goals! ✔ Existing industry contacts in architecture, construction, property management, IT, structured cabling, or related fields a major plus! ✔ Entrepreneurial drive—you love building relationships and winning deals. ✔ Ability to thrive in a face-to-face sales environment—this is not a remote role. ✔ BA/BS degree preferred, but experience and results matter most. What’s In It for You? Competitive Base Salary: $75K – $100K + uncapped commissions First-year guaranteed earnings: $115K - $140K Lunch stipend (Grubhub 2x per week!) Entrepreneurial environment with high visibility and impact Comprehensive insurance coverage (Health, Dental, Vision) 401(k) + employer match Company-paid life insurance At DGA Security, we work hard, win big, and support each other every step of the way. If you’re looking for a career where you can make a difference, earn top dollar, and work alongside the best in the industry, this is it. Ready to Join a Winning Team? Apply Today! DGA is an Equal Opportunity Employer. Here, we believe that embracing innovation is not just a core value, but a responsibility. We are committed to building an inclusive and diverse workplace where everyone, regardless of race, gender, age, disability, sexual orientation, religion, or any other characteristic, feels valued and supported. We provide equal opportunities to all applicants and employees and strive to foster a culture where differences are celebrated, and everyone's voice is heard. Your unique perspectives and experiences are what drive us forward.

Job Description Midwood EMS is seeking new and experienced EMTs to work from our Brooklyn Base located in Coney Island. WHY WORK WITH MIDWOOD EMS: • $1000 Sign-On Bonus for Full-Time Employees, • Flexible Schedules, • Seeking Full-Time and Part-Time EMTS, • Weekly Paychecks, • Paid Time Off, • Professional Work Environment, • Friendly, Dedicated Coworkers EMTs must possess current: • New York State EMT certificate, • New York State Driver’s License (if required) The duties of the crew include but are not limited to: Arrival for tour of duty : The crew must arrive on time, in proper uniform, neat and clean and in possession of a New York State Emergency Medical Technician Certificate. Personal patient care equipment when present, must be in good working order and clean. Persons who do not meet these criteria will not be allowed to start work. Prior to departing the garage ‑ the crew must : • Perform a visual inspection of the patient compartment, inside and out, for cleanliness and damage., • Ensure access to and egress from the patient compartment via the rear and side doors., • Clean the patient compartment and equipment as necessary, • Complete the inventory check sheet (Part 800 list)., • Replace damaged or missing items. During the tour of duty ‑ the attendant must : • Respond to all calls as directed by the dispatcher., • Treat all patients in accordance with New York State Basic Life Support Protocols and applicable regional and local ALS protocols., • Secure pertinent information and records from the discharge clerk or RN at the transferring facility., • Introduce themselves to the patient and call the patient by proper name e.g., Mrs. or Mr., • Tell the patient what is happening and where the patient is going., • Transport all patients on the stretcher., • Carry all patients to and from the ambulance ‑ none are to walk., • Carefully monitor all patients during transport., • Record changes in patient's condition during transport., • Alter patient care in accordance with changes in the patient's condition., • Take all patients to their assigned room at a medical facility or to their apartment on discharge., • Patients are never to be left at the door., • Properly complete the patient care record., • Properly complete all company paperwork and obtain all necessary signatures for billing purposes., • Report with the patient and records to the appropriate person at the receiving facility., • Maintain professional demeanor and courteous interaction with all medical facility staff., • Replace equipment in the ambulance as necessary to maintain compliance with State regulations and policy., • Return the patient compartment to a condition of readiness for the next call. State Inspections: Ambulances are subject to inspection by representatives of the State EMS office without advance notice. Inspectors will show proper identification and conduct inspections on the spot. In the event of an inspection, the crew must notify the dispatcher immediately, then cooperate fully with the inspector. As requested by the inspector, the crew will present or demonstrate any or all equipment on the ambulance. At the completion of the inspection, the inspector will present the crew with a copy of the inspection sheet that will be turned over to the supervisor at the end of the shift. The crew will promptly notify the dispatcher of the results of the inspection. In the event a violation notice is issued, the crew must contact a supervisor prior to accepting another patient. The supervisor will decide the course of action. Our policies and procedures are geared toward strict compliance with the New York State Department of Health regulations. In the event a violation results from an administrative shortcoming, management will accept responsibility and promptly correct the procedure. In the event a violation results from failure on the part of the attendant, disciplinary action will be taken. End of tour: The crew must return the ambulance to the garage, secure the ambulance and equipment as required, replace all supplies used during the tour and then report to the supervisor. All paperwork as well as a report of any problems encountered during the tour will be reported to the supervisor. The foregoing delineates primary responsibilities but is not intended to eliminate creative effort on the part of our employees. Management encourages constructive criticism and recommendations for modification of policies that will result in improving our work environment and service to our patients and clients. Notice: EMS agencies in NYS are required by law (Executive Law Section 837-s) to check applicants (who may be involved in the care or transportation of patients) personally identifying information against the Sex Offender Registry and make a determination of eligibility to become a member/employee pursuant to Correction Law Article 23-A Powered by JazzHR rxOL14mBp6

Job Description The ideal candidate will plan, coordinate, and implement projects within the estimated budget, timeline, and scope. They will also effectively monitor and present project updates to relevant stakeholders, clients, and project team members. We seek a skilled and experienced electrical Project Manager to oversee and manage projects from inception to completion. The successful candidate will coordinate and supervise all electrical aspects of the projects, ensuring they are completed on time, within budget, and in compliance with Queue Electric's safety regulations and quality standards. As a Project Manager at Queue Electric, you will collaborate with various teams and communicate effectively with clients, subcontractors, and vendors. You will play a crucial role in delivering successful electrical project completion to our esteemed clients. Key Responsibilities • Create and manage project schedules, milestones, and deliverables to ensure timely project completion., • Develop comprehensive project budgets, monitor costs, and implement cost-saving measures when possible., • Provide regular project updates to clients and stakeholders, informing them of project status, risks, and milestones., • Procure and coordinate necessary materials, equipment, and subcontractors for each project., • Attend and run project meetings., • Evaluate project team performance, providing feedback, coaching, and training as needed., • Maintain accurate project documentation, including progress reports, change orders, and project closeout documents., • Address any project-related issues, conflicts, or delays promptly and effectively, seeking solutions that maintain project progress., • Collaborate with clients, architects, engineers, and other stakeholders to understand project requirements and objectives., • Identify areas of process improvement and implement best practices to enhance project efficiency and profitability., • Oversee the work of subcontracts, ensuring they adhere to project specifications and safety guidelines., • Must have experience with FDNY inspection paperwork as needed for fire alarm inspections, • MTA, NJ Transit & Metro North experience a +, • 3-5+ years of Project Manager experience required, • Experience in Commercial/ Residential Projects- Public works a +, • Bachelor's degree or equivalent work experience in the electrical contracting/engineering field, • Familiarity with electrical design, codes, and regulations (e.g., NECA)., • Strong organizational & multi-tasking skills with attention to detail, • Must be comfortable with on-site and field visits and in communicating with clients, field supervisors, and foremen., • Strong business acumen in project and planning and management, • Strong stakeholder outreach and engagement capabilities including advanced public speaking and presentation skills, • High level of communication, organizational, and interpersonal skills involving the ability to work cross-functionally to track and understand complex issues and communicate clearly and precisely to diverse audiences., • Proficiency in project management software (ex: Procore) and the Microsoft Suite, • Practical knowledge of construction processes, • Must be able to travel Tri-State, Long Island, and New Jersey, • Spanish a+

Job Description Midwood EMS is seeking new and experienced Paramedics to work from our Bronx Base located in Westchester Square. WHY WORK WITH MIDWOOD EMS: • $1000 Sign-On Bonus for Full-Time Employees, • Flexible Schedules, • Weekly Paychecks, • Paid Time Off, • Professional Work Environment, • Friendly, Dedicated Coworkers EMT-Paramedics must possess current: • New York State Certified EMT Paramedic Card, • REMSCO/REMAC Paramedic Certification, • New York State drivers license (if required) The duties of the crew include but are not limited to: Arrival for tour of duty: The crew must arrive on time, in proper uniform, neat and clean and in possession of a New York State Emergency Medical Technician Certificate. Personal patient care equipment when present, must be in good working order and clean. Persons who do not meet these criteria will not be allowed to start work. Prior to departing the garage ‑ the crew must : • Perform a visual inspection of the patient compartment, inside and out, for cleanliness and damage., • Ensure access to and egress from the patient compartment via the rear and side doors., • Clean the patient compartment and equipment as necessary, • Complete the inventory check sheet (Part 800 list)., • Replace damaged or missing items. During the tour of duty ‑ the attendant must : • Respond to all calls as directed by the dispatcher., • Treat all patients in accordance with New York State Basic Life Support Protocols and applicable regional and local ALS protocols., • Secure pertinent information and records from the discharge clerk or RN at the transferring facility., • Introduce themselves to the patient and call the patient by proper name e.g., Mrs. or Mr., • Tell the patient what is happening and where the patient is going., • Transport all patients on the stretcher., • Carry all patients to and from the ambulance ‑ none are to walk., • Carefully monitor all patients during transport., • Record changes in patient's condition during transport., • Alter patient care in accordance with changes in the patient's condition., • Take all patients to their assigned room at a medical facility or to their apartment on discharge., • Patients are never to be left at the door., • Properly complete the patient care record., • Properly complete all company paperwork and obtain all necessary signatures for billing purposes., • Report with the patient and records to the appropriate person at the receiving facility., • Maintain professional demeanor and courteous interaction with all medical facility staff., • Replace equipment in the ambulance as necessary to maintain compliance with State regulations and policy., • Return the patient compartment to a condition of readiness for the next call. State Inspections: Ambulances are subject to inspection by representatives of the State EMS office without advance notice. Inspectors will show proper identification and conduct inspections on the spot. In the event of an inspection, the crew must notify the dispatcher immediately, then cooperate fully with the inspector. As requested by the inspector, the crew will present or demonstrate any or all equipment on the ambulance. At the completion of the inspection, the inspector will present the crew with a copy of the inspection sheet that will be turned over to the supervisor at the end of the shift. The crew will promptly notify the dispatcher of the results of the inspection. In the event a violation notice is issued, the crew must contact a supervisor prior to accepting another patient. The supervisor will decide the course of action. Our policies and procedures are geared toward strict compliance with the New York State Department of Health regulations. In the event a violation results from an administrative shortcoming, management will accept responsibility and promptly correct the procedure. In the event a violation results from failure on the part of the attendant, disciplinary action will be taken. End of tour: The crew must return the ambulance to the garage, secure the ambulance and equipment as required, replace all supplies used during the tour and then report to the supervisor. All paperwork as well as a report of any problems encountered during the tour will be reported to the supervisor. The foregoing delineates primary responsibilities but is not intended to eliminate creative effort on the part of our employees. Management encourages constructive criticism and recommendations for modification of policies that will result in improving our work environment and service to our patients and clients. Additional Responsibilities: • Completes required in service training., • Maintains state and local certification., • Inventories and services ALS supplies and drugs in accordance with applicable local, state and federal regulations., • Ensures that the assigned ambulance is equipped in accordance with applicable regulations., • Performs ALS patient care in accordance with regional and state protocols., • Records patient care on proper forms. Notice: EMS agencies in NYS are required by law (Executive Law Section 837-s) to check applicants (who may be involved in the care or transportation of patients) personally identifying information against the Sex Offender Registry and make a determination of eligibility to become a member/employee pursuant to Correction Law Article 23-A Powered by JazzHR 8v9Ho8d5sw

Job DescriptionSalary: $18 -20 per hour EMTs must possess current: • New York State EMT certificate, • New York State drivers license (if required by Company) The duties of the crew include but are not limited to: Arrival for tour of duty : The crew must arrive on time, in proper uniform, neat and clean and in possession of a New York State Emergency Medical Technician Certificate and a Company Identification Badge. Personal patient care equipment when present, must be in good working order and clean. Persons who do not meet these criteria will not be allowed to start work. Prior to departing the garage the crew must : • Perform a visual inspection of the patient compartment, inside and out, for cleanliness and damage., • Ensure access to and egress from the patient compartment via the rear and side doors., • Clean the patient compartment and equipment as necessary, • Complete the inventory check sheet (Part 800 list)., • Replace damaged or missing items. During the tour of duty the attendant must : • Respond to all calls as directed by the dispatcher., • Treat all patients in accordance with New York State Basic Life Support Protocols and applicable regional and local ALS protocols., • Secure pertinent information and records from the discharge clerk or RN at the transferring facility., • Introduce themselves to the patient and call the patient by proper name e.g., Mrs. or Mr., • Tell the patient what is happening and where the patient is going., • Transport all patients on the stretcher., • Carry all patients to and from the ambulance none are to walk., • Carefully monitor all patients during transport., • Record changes in patient's condition during transport., • Alter patient care in accordance with changes in the patient's condition., • Take all patients to their assigned room at a medical facility or to their apartment on discharge., • Patients are never to be left at the door., • Properly complete the patient care record., • Properly complete all company paperwork and obtain all necessary signatures for billing purposes., • Report with the patient and records to the appropriate person at the receiving facility., • Maintain professional demeanor and courteous interaction with all medical facility staff., • Replace equipment in the ambulance as necessary to maintain compliance with State regulations and policy., • Return the patient compartment to a condition of readiness for the next call. State Inspections: Ambulances are subject to inspection by representatives of the State EMS office without advance notice. Inspectors will show proper identification and conduct inspections on the spot. In the event of an inspection, the crew must notify the dispatcher immediately, then cooperate fully with the inspector. As requested by the inspector, the crew will present or demonstrate any or all equipment on the ambulance. At the completion of the inspection, the inspector will present the crew with a copy of the inspection sheet that will be turned over to the supervisor at the end of the shift. The crew will promptly notify the dispatcher of the results of the inspection. In the event a violation notice is issued, the crew must contact a supervisor prior to accepting another patient. The supervisor will decide the course of action. Our policies and procedures are geared toward strict compliance with the New York State Department of Health regulations. In the event a violation results from an administrative shortcoming, management will accept responsibility and promptly correct the procedure. In the event a violation results from failure on the part of the attendant, disciplinary action will be taken. End of tour: The crew must return the ambulance to the garage, secure the ambulance and equipment as required, replace all supplies used during the tour and then report to the supervisor. All paperwork as well as a report of any problems encountered during the tour will be reported to the supervisor. The foregoing delineates primary responsibilities but is not intended to eliminate creative effort on the part of our employees. Management encourages constructive criticism and recommendations for modification of policies that will result in improving our work environment and service to our patients and clients.

Job Description About Maneva Maneva, a startup founded by an ex-Google Deepmind researcher, is an AI service provider revolutionizing manufacturing operations with cutting-edge AI solutions for autonomous factory operation and optimization. Our solution generates AI-powered actions and insights using off-the-shelf hardware or existing vision systems for real-impact manufacturing problems in products and equipment inspection, production efficiency, safety, and more. What You'll Do As an Enterprise Account Executive at Maneva, you’ll be at the forefront of our growth—leading consultative, value-based sales conversations with manufacturing decision-makers. You’ll own the full sales cycle and help some of North America’s most recognizable manufacturers realize the value of our platform. Please note: This role requires travel +25% to visit prospect and client sites, while being able to manage your work remotely from home. If you are not able to commit to this please do not apply. Key Responsibilities: • Own and drive end-to-end enterprise sales cycles—from discovery to close, • Navigate complex buying groups involving plant managers, VP Ops, COOs, and CFOs, • Lead high-impact conversations around ROI, operational efficiency, and strategic transformation, • Deliver compelling demos and proposals tailored to technical and executive audiences, • Partner with pre-sales, deployment strategists, and leadership to align on solution design and implementation, • Collaborate with marketing and outbound SDRs to develop targeted ABM campaigns, • Maintain pipeline hygiene and accurate forecasting in CRM (HubSpot, Salesforce, etc.), • Represent Maneva at industry events, trade shows, and executive briefings Qualifications: • 5+ years of experience in complex enterprise sales, ideally in industrial tech, AI, automation, or enterprise SaaS, • Proven ability to sell to executive decision-makers (COO, VP Ops, CTO, CFO, etc.), • Experience with longer sales cycles (6 months+), often involving technical evaluations, pilots, or proof-of-concept phases, • Strong understanding of how to build a business case and communicate ROI, • Experience with solution selling or consultative methodologies (MEDDIC, Challenger, etc.), • Comfort navigating ambiguity in early-stage or startup environments, • Excellent communication, storytelling, and relationship-building skills, • Familiarity with manufacturing processes or plant operations is a strong plus Why Join Us? • Opportunity to work with cutting-edge AI technology in manufacturing., • Competitive salary with a commission structure and professional growth opportunities, • Flexible, remote work with local travel for client engagements. Important Notice: Protecting Your Personal Information We are committed to ensuring the security and privacy of all applicants. Please be aware that our company will never ask for sensitive personal information, via email, phone call or text message. We also do not require payment from applicants for any part of the hiring process. If you are contacted by someone claiming to represent our company and asking for such information, please do not respond. Instead, report the incident to us immediately at .

Job DescriptionPOSITION SUMMARY: The Water/ Wastewater Project Engineer/ Manager is a professional with a minimum of 8 years of experience. This individual will plan, design and perform analysis on water/wastewater engineering projects such as pipelines; pumping stations; and treatment facilities. Engineer shall be self-motivated, capable of acting as firm’s representative to clients, and providing support to branch offices in NJ/PA/DE/MD area. PRIMARY DUTIES: • Hydraulic calculations and layout of structures., • Producing correspondence/reports/biddable documents for arsenic, radium and iron removal water plants; wells; water storage tanks; pumping stations; piping systems; and wastewater treatment plant improvements., • Engineering support to our inspection department., • Act as firm’s representative to Townships; utility authorities; and private utility companies., • Draft concise proposals for new work., • Capable of addressing multiple simultaneous assignments, on-time and within budgets., • "Proactive"' identification of problems/issues coupled with detailed analysis and effective resolution., • Producing all deliverables associated with this position., • Capable of addressing multiple simultaneous assignments, on-time and within budgets., • Regulatory permitting., • Knowledge of water/wastewater equipment and their purpose., • Ability to read and comprehend complicated construction, drawings, schematics, specifications, codes, and handbooks., • Ability to clarify and concisely express thoughts verbally and in written correspondence/reports/specifications., • Provides effort and takes pride in all work assignments produced., • Not afraid to ask for guidance/assistance in order to expedite the date of assignment deliverables., • Ability to simultaneously work on group and individual assignments., • Capable of providing directions and mentoring less experienced staff., • Capable of managing project meeting attended by either staff, clients or contractor’s personnel., • Familiarity with NJDEP regulations and compliance requirements., • Must have effective communication, management and writing skills., • Must be skilled in the use of Word/Excel products., • Bachelors of Science Degree in Civil, Mechanical, Structural, or Chemical Engineering curriculum from an accredited four-year college or university. CERTIFICATIONS/LICENSES REQUIRED • NJPE License Required or Ability to Acquire NJPE Reciprocity Essential, • Professional Licensure Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. Occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job Description Job title: Intake Specialist Reports to: Director of Social Services/Program Director FLSA Status: Non-Exempt (Hourly) / Full Time Date Issued: January 2021 POSITION SUMMARY: The House Manager/Intake Specialist overseas the direct care of the residents, manages the intake process, and coordinates with the security department to ensure the safety of clients residing in the facility. ESSENTIAL JOB FUNCTIONS: Through the employee’s own efforts, the employee accomplishes the following essential functions: • Supervises staff. Participates in training and evaluation of work performance of staff and volunteers., • Participates in-group training sessions in first aid, security techniques., • Facilitates and coordinates the intake process for all incoming residents in accordance with DHS., • Maintains the house log, prepare incident reports, and serves as mediator for client disputes., • Conduct weekly unit inspections for ACS and new born 0-12 months., • Conducts regular inspections of the buildings. Ensures client safety and compliance with operational procedures, standards and regulations., • Responds to emergencies as they arise. Interface with police department, fire department, EMS and other public service entitles., • Conducts required periodic fire drills, informs staff of safety and building policies and procedures., • Records and reports maintenance needs to violations of the building and fire codes to the program Director., • Arranges with housekeeping staff for bedding, linens and personal hygiene needs of consumers., • Attends staff meetings as requested., • Assist Security guards when needed., • Conduct monthly house meetings., • Maintains food logs, handles food delivery and handles meal delivery to clients., • Perform other job duties and special projects assigned by management. ADDITIONAL JOB FUNCTIONS: • Adheres to all policies and procedures, including those prescribed in the Highland Park CDC Employee Handbook., • Maintain confidentiality and do not disclose information learned through the course of the job with people other than those who need to know including employee information, financial information, client information, etc. COMPETENCIES: To perform the job successfully, an individual demonstrates the following competencies. • Customer Service Orientation: Manages difficult or emotional situations with internal and external stakeholders; Responds promptly to customer needs; Responds to request for service and assistance. Maintains and communicates a positive “can do” attitude with internal and external stakeholders., • Problem Solving: Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Uses reason when dealing with emotional topics., • Systems Thinking: Demonstrates an ability to (a) see how organizational systems (e.g., internal/external conditions, processes, people) interact and influence each other, and (b) how these systems create and contribute to specific issues (e.g., high voluntary turnover) and strengths (e.g., strong customer focus)., • Planning / Organization: Prioritizes and plans work activities; Uses time efficiently: Plans for additional resources; Develops realistic action plans. Leverages tools to manage workflow and reprioritizes accordingly., • Service and Teamwork - Understands the needs and wants of the organization, customers, co-workers and supervisors in order to provide accurate, complete and timely service and to further the mission, values and goals of the organization., • Oral Communication: Speaks clearly and persuasively in positive or negative situations; listens and gets clarification., • Written Communication: Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information., • Ethics: Treats people with respect: Inspires the trust of others; Works with integrity and ethically; Upholds organizational values., • Dependability: Follows instructions; Responds to management direction; Takes responsibility for own actions; Keeps commitments., • Initiative: Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. QUALIFICATIONS: To perform this job successfully, and individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and / or ability required. • Minimum Required Education & Experience:, • HS Diploma or GED required and, • 2 years of supervisory or management experience, • Certification in First Aid, CPR, • Fire Safety Coordinator, • Food Handlers Certification, • Preferred Education & Experience:, • Bachelor’s degree preferred, • Computer Skills:, • Proficient in computer software programs (Word, Excel, Power Point, CARES, etc.), • Language skills:, • Excellent verbal and written communication skills. Reads and comprehends simple instructions, short correspondence, and memos; Writes simple correspondence; Presents information in one-on-one and small groups situations outside stakeholders, clients and other employees., • Bilingual is preferred GENERAL PHYSICAL REQUIRMENTS AND WORKING CONDITIONS: • GENERAL WORKING HOURS:, • Generally, this position is Monday through Sunday, revolving shift for 24 hour coverage., • WORKING FROM HOME:, • Most essential functions of this job cannot be completed working from home., • TRAVEL:, • May be required to travel about 5% of the time to purchase items or to attend a training or go to the post office as needed., • PHYSICAL REQUIREMENTS:, • The physical activity for the House Manager/Intake Specialist is:, • Climbing & Ambulating Stairs: Ascending or descending stairs and ramps using feet and legs and/or hands and arms. Must be able to walk up and down stairs (about 10 flights) in order to patrol stairways, respond to security incidents, and assist in the evacuation of clients during an emergency. Body agility is emphasized. The amount of climbing required exceeds that required for ordinary locomotion., • Stooping: Bending body downward and forward by bending spine at the waist. This factor is important if it occurs to a considerable degree and requires full use of the lower extremities and back muscles., • Kneeling: Bending legs at knee to come to a rest on knee or knees., • Crouching: Bending the body downward and forward by bending leg and spine., • Reaching. Extending hand(s) and arm(s) in any direction., • Walking. Moving about on foot to accomplish tasks, and has an ability to navigate from one location to another., • Standing: Remaining upright on the feet, particularly for sustained periods of time., • Lifting. Must raise objects from a lower to a higher position or move objects horizontally from position to-to-position., • Fingering: Picking, pinching, typing or otherwise working, primarily with fingers rather than with whole hand or arm as in handling. Ability to use computer tablet to write reports, notes and document compliance with patrol stops., • Grasping: Applying pressure to an object with the fingers and palm., • Talking: Expressing or exchanging ideas by means of the spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers accurately, loudly, or quickly., • Hearing: Perceiving the nature of sounds at normal speaking levels with or without correction, and having the ability to receive detailed information through oral communication, and making fine discriminations in sound., • Feeling. Must be able to perceive attributes of objects, such as size, shape, temperature or texture by touching with skin, particularly that of fingertips. Assesses potential safety threats, such as by exposure to chemicals and heat from malfunctioning equipment., • Physical requirements for the House Manager/Intake Specialist:, • Sedentary work: Exerting up to 10 pounds of force occasionally and / or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time, with walking and standing required only occasionally., • The visual acuity requirements for the House Manager/intake Specialist (including color, depth perception and field vision)., • Required to have close visual acuity to perform an activity such as preparing and analyzing data and figures, transcribing, viewing a computer terminal; extensive reading; visual inspection to determine the accuracy, neatness, and thoroughness of the work., • The House Manager/Intake Specialist will be subject to the following conditions in this position:, • The worker is subject to inside environmental conditions, protected from weather conditions but not necessarily from temperature changes. The physical demands described here are representative of those that must be met by an employee to successfully perform the Essential Functions. Reasonable accommodations may be made upon an employee’s request. This Job Description is not intended, and should not be construed, to be an exhaustive list of all Job Functions, Competencies, Skills and Work Environment/Conditions associated with this job. It is meant to be an accurate reflection of principal job elements useful for recruiting and selecting employees, assigning work and evaluating performance. Additional responsibilities may be assigned, and management retains the right to change this Job Description at any time. Acceptance of this Job Description does not constitute an employment agreement or contract. The Company is an at-will employer and reserves the right to terminate employment for any reason or no reason, with or without notice to the employee. JOB DESCRIPTION ACKNOWLEDGEMENT AND ACCEPTANCE Employee Signature Date Supervisor’s Signature Date

Job Description Cresilon® is a Brooklyn-based biotechnology company that develops, manufactures, and markets hemostatic medical devices utilizing the company’s proprietary hydrogel technology. The company’s plant-based technology has revolutionized the current standard by stopping traumatic and surgical bleeds in seconds without the need for extended manual pressure. The company's current and future product lines target veterinary, human trauma, and human surgical applications. Cresilon's mission is to save lives. Learn more about the company at . The Production Technician I is responsible for the aseptic manufacturing of Cresilon’s products for the animal health industry. The Production Technician II will be trained in clean room operations, aseptic techniques, and must demonstrate the ability to successfully pass gowning qualifications. The position involves operating simple and complex processing equipment, routine sanitization of cleanroom facilities, and manual cleaning of equipment. The ideal candidate will have a proven track record of steady progress in a similar manufacturing environment and must possess a willingness to learn all equipment and jobs in the assigned manufacturing and sanitation of clean room facilities as required. Production Technicians are also responsible for the quality of products produced by ensuring compliance with local, State and Federal regulations, including current Good Manufacturing Practices (cGMP). • Perform line clearance of assigned production areas as required., • Perform equipment set up and disassembly activities., • Operate production, assembly and testing equipment, including heat sealers, bar code scanners, weighing scales, tumblers, autoclaves, filling equipment, and packaging equipment., • Formulate, fill, and pouch product in accordance with SOPs., • Troubleshoot all operating deviations and issues and coordinate with other functions when required., • Report both machine and operating deviations to area supervisor or designee., • Perform routine, preventative maintenance on equipment., • Perform cleaning and disinfection of the manufacturing spaces., • Perform cleaning and sterilization of manufacturing equipment., • Perform visual inspection of components and/or product in accordance with SOP’s and cGMP’s., • Perform sampling, intermediate, and finished goods packaging as per SOPs., • Package and ship raw materials for sterilization., • Perform material receiving, staging, material movements, and material replenishment as per SOPs., • Transport samples, materials, and equipment between multiple facilities., • Complete data entry and generate reports for material inventory movements., • Complete and maintain applicable logbooks and batch record paperwork as required and in accordance with GMP and GDP standards., • Maintain a clean production environment during shift., • Report all actual, near misses and potential accidents for further investigation., • Take immediate action to resolve any near miss situations., • Assist in investigation of all actual, near misses and potential accidents. Provide information to troubleshoot and take initiative to resolve operational issues independently., • Assist in project commissioning and validation activities, as necessary., • Prepare samples or prototypes as required for testing, or other evaluations, • Monitor the plant status and liaise with colleagues of other departments to ensure there is no interruption to manufacturing process., • Complete all required trainings: Read and Understand (TM1), Computer Based Training with Quiz (TM2), Instructor Led (TM3/TM4), and On-the-Job Trainings (TM5)., • Oversee training of junior employees on production processes as assigned., • Ensure proper communication and handling over of shift duties., • Support Environmental and Personnel Monitoring (EM/PM) activities as directed., • HS Diploma or Equivalent with 2+ years of relevant manufacturing experience in the pharmaceutical, biotechnology, or medical device industry OR 2 or 4 year degree with 0+ years of relevant experience., • Ability to read, understand, and execute written work instructions., • Ability to complete documentation accurately., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals, • Ability to become gowning qualified to work in a cleanroom environment., • Ability to problem solve and achieve business objectives., • Ability to adapt training approach., • Willingness to be flexible, and open minded to new processes or changes in direction., • Team oriented, building relationships with peers and managers in a proactive manner., • Excellent verbal and written communication skills., • Proficient in Microsoft Office (Word, Excel, Outlook)., • Paid Vacation, Sick, & Holidays, • Medical, Dental, and Vision Insurance, FSA: Dependent & Healthcare, Commuter & Parking Benefits, Long Term Disability Coverage, • Company Paid Life and Short-Term Disability Coverage, • Work/Life Employee Assistance Program, • 401(k) & Roth Retirement Savings Plan with company match up to 5%, • Monthly MetroCard Reimbursement This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Cresilon makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job Description MISSION STATEMENT Are you ready to give back to the community while pursuing your passion? For over 50 years, Acacia Network and its affiliates have been committed to improving the quality-of-life and wellbeing of underserved communities in New York City and beyond. We are one of the leading human services organizations in New York City and the largest Hispanic-led nonprofit in the State, serving over 150,000 individuals every year. Our programs serve individuals at every age and developmental level, from the very young through our daycare programs to mature adults through our older adults centers. Our extensive array of community-based services are fully integrated, bilingual and culturally competent. POSITION OVERVIEW Under supervision of the Program Director, the Service Coordinator is responsible for providing case management, housing support to participants and monthly reporting requirements that will ensure compliance with the parameters of the program. The requirements listed below represent the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities as defined by the ADA to perform the essential functions of the job. KEY ESSENTIAL FUNCTIONS Housing Liaison • Acts as liaison between participants, superintendents and building managers to ensure all repairs are completed to either the participant’s apartment unit or the building, • Maintains a Building and Apartment Log, which includes date, and condition of the apartments and buildings, • Reports all non-compliance issues with respect to the apartment and building to the Supportive Housing Manager, including incidents requiring immediate attention, • Provides case management and on-site crisis intervention, • Completes required service plans, • Facilitates monthly CAB tenant meetings, • Educates participants with respect to good housekeeping and home-safety practices, budgeting and landlord/tenant relations, as necessary, • Maintains appropriate documentation of all tenant contacts, • Documents monthly progress notes in the participants’ chart, • Conducts home visits to help evaluate participants’ compliance with the rules and regulations of the program and to assess the need for referral to supportive services, • Takes random urine samples for drug screening toxicology, • May escort participants to social services agencies, as requested, • Responsible for completing annual tenant rent calculation forms, • Responsible for completing annual apartment inspection forms, • Updates monthly program data base, • High School Diploma required, • Associate’s degree in human services or other related fields preferred, • Three (3+) years previous relevant experience in a Mental or Behavioral Health environment required, • Ability to use business acumen to exercise good judgment and decision-making, • Ability to deal with sensitive issues with diplomacy and discretion, • Must be able to multitask with strong organizational skills, • Excellent interpersonal skills and able to communicate both verbally and in written form, • Commitment to cultural diversity and sensitivity, • Ability to maintain a professional demeanor under pressure, and operate with a keen sense of urgency and commitment to quality Acacia Network provides a comprehensive and competitive benefits package to our employees. In addition to a competitive salary, our benefits include medical, dental, and vision coverage. We also offer generous paid time off, including vacation days and paid holidays, to support a healthy work-life balance. We prioritize the well-being of our employees both professionally and personally. As an Equal Opportunity Employer, we encourage individuals from all backgrounds to apply.

Job Description Night Field Service Manager Expand your CAREER now! NELBUD is growing and we want you to grow with us. Who Are We? We are modernizing the ways of Fire Protection, Kitchen Exhaust Hood Cleaning, Grease Trap Services, and more * Hood – kitchen hood cleaning, technical services, and repair * Fire – Fire protection & suppression systems * Grease – grease trap cleaning and line jetting How do we invest in YOU? * Growth – we promote within FIRST * Generous PTO – plus 8 observed holidays * Continuous safety training and development training * All-around health insurance – health, dental, vision, and life * Access to your money sooner with our Pay on Demand benefit! Your Typical Day * Responsible for a group consisting of two or more Lead technicians and their crews * The enforcement of all safety rules both on and off the job site for the team * Inspection of the complete Kitchen Exhaust system to include but not limited to the hoods, filters, ductwork, and exhaust fans * Responsible for operating and maintaining assigned vehicles * Properly reporting & requesting necessary vehicle and equipment maintenance * Immediately correct and report any unsafe acts or hazardous conditions * Provide exceptional customer service while proudly representing NELBUD What Will You Bring? * Valid driver’s license – company truck provided from shop to job site * To be considered for this driving position, you must be at least 20 years old with a minimum of 3 years of driving experience, in addition to a valid DL * Prior experience in a lead, supervisor, or manager position * Prior experience in Kitchen Exhaust/Hood cleaning is strongly preferred * Ability to work overnight varying shifts times * Ability to access and tolerate small spaces and work in high places - This is a working manager position and you will be out in the field We love what we do. We know you will, too. By leveraging technology and the talents of our world-class staff we are changing the way people think about their careers! Come visit us at

Job Description Job title: Residential Aide Reports to: Program Director and Director of Social Services FLSA Status: Non-Exempt (Hourly) / Full Time Date Issued: August 2021 POSITION SUMMARY: The House Manager/Intake Specialist overseas the direct care of the residents, manages the intake process, and coordinates with the security department to ensure the safety of clients residing in the facility. ESSENTIAL JOB FUNCTIONS: Through the employee’s own efforts, the employee accomplishes the following essential functions: • Supervises staff. Participates in training and evaluation of work performance of staff and volunteers., • Participates in-group training sessions in first aid, security techniques., • Facilitates and coordinates the intake process for all incoming residents in accordance with DHS., • Maintains the house log, prepare incident reports, and serves as mediator for client disputes., • Conduct weekly unit inspections for ACS and new born 0-12 months., • Conducts regular inspections of the buildings. Ensures client safety and compliance with operational procedures, standards and regulations., • Responds to emergencies as they arise. Interface with police department, fire department, EMS and other public service entitles., • Conducts required periodic fire drills, informs staff of safety and building policies and procedures., • Records and reports maintenance needs to violations of the building and fire codes to the program Director., • Arranges with housekeeping staff for bedding, linens and personal hygiene needs of consumers., • Attends staff meetings as requested., • Light maintenance - unclogged toilets, sink, emergency water shut offs, emergency salting during necessary weather., • Assist Security guards when needed., • Conduct monthly house meetings., • Perform other job duties and special projects assigned by management. ADDITIONAL JOB FUNCTIONS: • Adheres to all policies and procedures, including those prescribed in the Highland Park CDC Employee Handbook., • Maintain confidentiality and do not disclose information learned through the course of the job with people other than those who need to know including employee information, financial information, client information, etc. COMPETENCIES: To perform the job successfully, an individual demonstrates the following competencies. • Customer Service Orientation: Manages difficult or emotional situations with internal and external stakeholders; Responds promptly to customer needs; Responds to request for service and assistance. Maintains and communicates a positive “can do” attitude with internal and external stakeholders., • Problem Solving: Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Uses reason when dealing with emotional topics., • Systems Thinking: Demonstrates an ability to (a) see how organizational systems (e.g., internal/external conditions, processes, people) interact and influence each other, and (b) how these systems create and contribute to specific issues (e.g., high voluntary turnover) and strengths (e.g., strong customer focus)., • Planning / Organization: Prioritizes and plans work activities; Uses time efficiently: Plans for additional resources; Develops realistic action plans. Leverages tools to manage workflow and reprioritizes accordingly., • Service and Teamwork - Understands the needs and wants of the organization, customers, co-workers and supervisors in order to provide accurate, complete and timely service and to further the mission, values and goals of the organization., • Oral Communication: Speaks clearly and persuasively in positive or negative situations; listens and gets clarification., • Written Communication: Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information., • Ethics: Treats people with respect: Inspires the trust of others; Works with integrity and ethically; Upholds organizational values., • Dependability: Follows instructions; Responds to management direction; Takes responsibility for own actions; Keeps commitments., • Initiative: Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. QUALIFICATIONS: To perform this job successfully, and individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and / or ability required. • Minimum Required Education & Experience:, • HS Diploma or GED required and, • 2 years of supervisory or management experience, • Certification in First Aid, CPR, • Fire Safety Coordinator F80, • Requires the ability to work late nights, weekends and revolving shifts. The building requires 24-hour coverage., • Food handlers Certification, • Preferred Education & Experience:, • Bachelor’s degree preferred, • Computer Skills:, • Proficient in computer software programs (Word, Excel, Power Point, CARES, etc.), • Language skills:, • Excellent verbal and written communication skills. Reads and comprehends simple instructions, short correspondence, and memos; Writes simple correspondence; Presents information in one-on-one and small groups situations outside stakeholders, clients and other employees., • Bilingual is preferred GENERAL PHYSICAL REQUIRMENTS AND WORKING CONDITIONS: • GENERAL WORKING HOURS:, • This position requires coverage 24 hours 7 days a week., • Shift schedules for staff may be revolving at times to ensure staff coverage., • This position may require working shifts longer than 8 hours. All employees who work overtime will be paid accordingly under state and federal law., • WORKING FROM HOME:, • Most essential functions of this job cannot be completed working from home., • TRAVEL:, • May be required to travel about 5% of the time to purchase items or to attend a training or go to the post office as needed., • PHYSICAL REQUIREMENTS:, • The physical activity for the Intake Specialist is:, • Climbing & Ambulating Stairs: Ascending or descending stairs and ramps using feet and legs and/or hands and arms. Must be able to walk up and down stairs (about 10 flights) in order to patrol stairways, respond to security incidents, and assist in the evacuation of clients during an emergency. Body agility is emphasized. The amount of climbing required exceeds that required for ordinary locomotion., • Stooping: Bending body downward and forward by bending spine at the waist. This factor is important if it occurs to a considerable degree and requires full use of the lower extremities and back muscles., • Kneeling: Bending legs at knee to come to a rest on knee or knees., • Crouching: Bending the body downward and forward by bending leg and spine., • Reaching. Extending hand(s) and arm(s) in any direction., • Walking. Moving about on foot to accomplish tasks, and has an ability to navigate from one location to another., • Standing: Remaining upright on the feet, particularly for sustained periods of time., • Lifting. Must raise objects from a lower to a higher position or move objects horizontally from position to-to-position., • Fingering: Picking, pinching, typing or otherwise working, primarily with fingers rather than with whole hand or arm as in handling. Ability to use computer tablet to write reports, notes and document compliance with patrol stops., • Grasping: Applying pressure to an object with the fingers and palm., • Talking: Expressing or exchanging ideas by means of the spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers accurately, loudly, or quickly., • Hearing: Perceiving the nature of sounds at normal speaking levels with or without correction, and having the ability to receive detailed information through oral communication, and making fine discriminations in sound., • Feeling. Must be able to perceive attributes of objects, such as size, shape, temperature or texture by touching with skin, particularly that of fingertips. Assesses potential safety threats, such as by exposure to chemicals and heat from malfunctioning equipment., • Physical requirements for the Intake Specialist:, • Sedentary work: Exerting up to 10 pounds of force occasionally and / or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time, with walking and standing required only occasionally., • The visual acuity requirements for the intake Specialist (including color, depth perception and field vision)., • Required to have close visual acuity to perform an activity such as preparing and analyzing data and figures, transcribing, viewing a computer terminal; extensive reading; visual inspection to determine the accuracy, neatness, and thoroughness of the work., • The Intake Specialist will be subject to the following conditions in this position:, • The worker is subject to inside environmental conditions, protected from weather conditions but not necessarily from temperature changes. The physical demands described here are representative of those that must be met by an employee to successfully perform the Essential Functions. Reasonable accommodations may be made upon an employee’s request and assessed on a case by case basis. This Job Description is not intended, and should not be construed, to be an exhaustive list of all Job Functions, Competencies, Skills and Work Environment/Conditions associated with this job. It is meant to be an accurate reflection of principal job elements useful for recruiting and selecting employees, assigning work and evaluating performance. Additional responsibilities may be assigned, and management retains the right to change this Job Description at any time. Acceptance of this Job Description does not constitute an employment agreement or contract. The Company is an at-will employer and reserves the right to terminate employment for any reason or no reason, with or without notice to the employee. JOB DESCRIPTION ACKNOWLEDGEMENT AND ACCEPTANCE Employee Signature Date Supervisor’s Signature Date

Job Description We're looking for Paintless Dent Repair Technicians with a minimum of 3 years of professional automotive PDR experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history, and one of the four fastest companies to make the Fortune 500. As a Mid-Level PDR Technician, you'll be expected to have experience accessing panels, use glue-pulling techniques, and repair smaller-sized dents on both steel and aluminum vehicle panels. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description The Building People has an opportunity available for a Senior Chief Engineer to oversee approximately 1,000,000 SF in Kings Point, NY (North-Western Nassau County). The Senior Chief Engineer will cover the following duties: Duties/Responsibilities: • As a member of the contract PMO, to oversee the maintenance and continuous operation of all building systems, • Supervisory and management support to Preventive Maintenance Supervisor, engineers and maintenance staff, • Create and routinely update a documented plan that includes preventive, predictive and reactive maintenance procedures, • Participate regularly in client-facing and property team communications, • Lead, create and manage the engineering budget and participate in the overall operating budget process, • Assist in the development of a capital improvement plan, • Select, schedule, supervise and direct contractors/vendors, monitor and document performance, • Respond effectively to emergencies and service calls, • Provide timely update to Property Management Team, • Assist with soliciting proposals from vendors for assigned projects., • Lead and organize ongoing technical, safety, and operational process training programs and procedures, • Other duties as requested by property management team and/or client, • Oversee large, complex facilities and maintenance projects, • Contributes to the organization through strategy definition and implementation of directed initiatives, • Develops or assists with documentation and information maintenance, • Ensure all facilities systems are in proper working order by ensuring preventative maintenance is conducted and issues are addressed promptly, • Leads complex facilities projects, • Accurately estimates building costs and project timelines, • Communicates status of facilities projects to supervisor and others impacted in the facility, • Oversee maintenance and operations contracts with vendors, • Secures and maintains maintenance and operations contracts, • Ensure contracts are maintained and services are scheduled as needed to maintain continuity of operations, • Prepares reports and maintains records associated with vendor operation and maintenance, and facility operation and maintenance, • Produces written reports as requested or needed and by specified deadline, • Develop and Implement Facility Related Standard Operating Procedures (SOP), • Prepares and/or implements a detailed preventative maintenance plan for equipment to include routine testing of critical systems and equipment, • Leads or assists in coordinating or performing inspections, • Assists with safety equipment, inspection, certification, and maintenance, • Assists with establishing emergency contact procedures for unscheduled system interruptions or equipment malfunctions, • Assist as necessary with activities related to safety and operations committee meetings, • Provides technical assistance during emergency response incidents as necessary, • Minimum 15 years of progressive related experience in Building Infrastructure Operations and Management, • Ability to prepare clear strategic planning procedures and user-friendly templates to assist entities in undertaking forward, strategic planning., • Broad knowledge of all phases of engineering, field activities, production techniques, building materials, and construction methods for development of various work areas., • Understands technical issues and costs related to selection of design features and unique requirements., • Broad knowledge of building industry, government compliance & regulatory standards and environmental compliance laws and requirements., • Experienced with engineering work planning, scheduling and cost estimating., • Experienced managing knowledge of sustainability and its integration into the design and the construction of various buildings., • Must have excellent interpersonal skills, be a team player and have a knowledge sharing approach., • Ability to solve problems by thinking laterally and be able to understand the needs and requirements of the client and various entities – to provide planning / design / feasibility solutions in a multi -disciplinary / multi - sectional context., • Must be self-driven and able to plan and execute work without direct supervision from senior management and/or peers., • Must be flexible and adapt to working in a demanding environment, including the need to travel and work remotely if / when required., • Vocational or technical training in MEP fields., • Professional licensing in aligned MEP and Construction trades., • Experience in managing and maintaining Fire Life Safety systems and Fire Suppression, • Substantial experience in the maintenance and operation of a highly technical facility as well dispersed buildings with systems integration., • Significant experience in managing multiple projects and tasks simultaneously., • Supervisory experience, demonstrated experience planning, scheduling, and supervising complex maintenance projects., • A well-rounded background in all the building trades., • Experience with high pressure steam boilers., • Knowledge and experience with Geothermal Heat Pump systems and infrastructure., • Demonstrated knowledge of Direct Digital Control (DDC) systems., • Skill in problem solving and critical thinking associated with HVAC, Electricity, Plumbing; and other building maintenance., • Demonstrated skill in leadership., • Demonstrated oral and written communication skills., • Demonstrated interpersonal skills and ability to engage with a diverse group of people., • Demonstrated computer skills including Microsoft word, Excel, software for building equipment and control systems, familiarity with programmable logic controllers; basic computer hardware troubleshooting skills., • Ability to coordinate a large building and/or grounds program., • Ability to effectively read and interpret blueprints, construction plans and written specifications., • Universal CFC, • EPA 608, • Journeyman License (or equivalent) for one or more of the following: Electrical, Plumbing, Mechanical, • Boiler Operator certification, • CFM (IFMA), • PMP, • NATE (North American Technician Excellence) w/ specialty, • NICET certified, • UA Star HVAC Mastery Certification, • HVAC Excellence Professional Level Certification

Job Description CMCOM LLC – Now Hiring e-Builder Business Analyst (Construction Technology & Infrastructure Support) Location: New York Metro Region | Hybrid (2–3 days per week on-site at client offices) Start Date: Immediate | Full-Time Consultant Assignment Pay Rate: $50– $100 Per Hour (commensurate with experience and qualifications) About CMCOM CMCOM LLC is a certified MBE/DBE/SBE construction management, engineering, and technology support firm. We deliver construction-related IT and program controls solutions that modernize infrastructure program delivery, ensure compliance, and enhance transparency. Our clients include leading public-sector agencies such as the MTA, NYC Department of Design & Construction (DDC), NYC School Construction Authority (SCA), Port Authority of New York & New Jersey, and NYCHA. Position Overview The eBuilder Business Analyst will provide critical support to the Engineering Records & Document Management (ERDM) Unit, focusing on the Tenant Construction and Alteration Process (TCAP) Program. This position includes system analysis, workflow development, administration, testing, and user support to ensure compliance and efficiency in managing construction documentation. This role directly supports construction IT systems for infrastructure programs, integrating with Primavera P6, BIM tools, and agency document control platforms. Key Responsibilities • Perform system maintenance and administration; serve as primary contact for TCAP projects, • Provide core administrative tasks: project setup, user provisioning, template/mail merge maintenance, folder structure, and data transfer from TCAP tracker, • Support workflow development and testing: document requirements, use cases, and acceptance criteria; assist in building workflows that meet new business needs, • Maintain and update reporting fields (pre-con requests, FI requests, project status updates)., • Troubleshoot workflows and user permission issues; ensure compliance with standards, • Develop reports and dashboards for performance metrics across departments, • Deliver user training (in-person/virtual), maintain training materials, and develop reference manuals, • Provide backup Engineering Help Desk support as part of the eBuilder & Apps Support Team, • Bachelor’s degree from an accredited institution (advanced degree desirable)., • Strong system analysis skills – ability to produce requirements documents., • Excellent analytical, conceptual, and communication skills (oral & written)., • Self-motivated, quick learner with the ability to prioritize multiple tasks and meet deadlines., • Developer/Super Admin-level knowledge of eBuilder., • Experience supporting construction project management, document management, and financial reporting systems., • Proficiency with Enterprise Content Management solutions (OpenText, SharePoint)., • Familiarity with Microsoft Power BI reporting. ✔ Salary: $50 – $100 Per Hour ✔ Weekly Direct Deposit ✔ Health Insurance (Medical, Dental, Vision) ✔ 401(k) Retirement Plan ✔ PTO + Paid Holidays ✔ Hybrid Flexibility (2–3 days per week on-site) ✔ Exposure to major public infrastructure projects Why Join Us CMCOM is deeply committed to advancing diverse professionals in infrastructure IT. We provide mentorship, access to major infrastructure programs, and the chance to directly shape how technology supports construction delivery in New York’s most critical public works projects. Work Authorization Candidates must be authorized to work in the U.S. without current or future sponsorship. Equal Opportunity Employer CMCOM is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Employment decisions are made without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, veteran status, or other protected status. We strongly encourage applications from minorities, women, veterans, persons with disabilities, and MBE/DBE/SDVOB professionals. CMCOM LLC – Now Hiring e-Builder Business Analyst (Construction Technology & Infrastructure Support) Location: New York Metro Region | Hybrid (2–3 days per week on-site at client offices) Start Date: Immediate | Full-Time Consultant Assignment Pay Rate: $50– $100 Per Hour (commensurate with experience and qualifications) About CMCOM CMCOM LLC is a certified MBE/DBE/SBE construction management, engineering, and technology support firm. We deliver construction-related IT and program controls solutions that modernize infrastructure program delivery, ensure compliance, and enhance transparency. Our clients include leading public-sector agencies such as the MTA, NYC Department of Design & Construction (DDC), NYC School Construction Authority (SCA), Port Authority of New York & New Jersey, and NYCHA. Position Overview The eBuilder Business Analyst will provide critical support to the Engineering Records & Document Management (ERDM) Unit, focusing on the Tenant Construction and Alteration Process (TCAP) Program. This position includes system analysis, workflow development, administration, testing, and user support to ensure compliance and efficiency in managing construction documentation. This role directly supports construction IT systems for infrastructure programs, integrating with Primavera P6, BIM tools, and agency document control platforms. Key Responsibilities • Perform system maintenance and administration; serve as primary contact for TCAP projects, • Provide core administrative tasks: project setup, user provisioning, template/mail merge maintenance, folder structure, and data transfer from TCAP tracker, • Support workflow development and testing: document requirements, use cases, and acceptance criteria; assist in building workflows that meet new business needs, • Maintain and update reporting fields (pre-con requests, FI requests, project status updates)., • Troubleshoot workflows and user permission issues; ensure compliance with standards, • Develop reports and dashboards for performance metrics across departments, • Deliver user training (in-person/virtual), maintain training materials, and develop reference manuals, • Provide backup Engineering Help Desk support as part of the eBuilder & Apps Support Team, • Bachelor’s degree from an accredited institution (advanced degree desirable)., • Strong system analysis skills – ability to produce requirements documents., • Excellent analytical, conceptual, and communication skills (oral & written)., • Self-motivated, quick learner with the ability to prioritize multiple tasks and meet deadlines., • Developer/Super Admin-level knowledge of eBuilder., • Experience supporting construction project management, document management, and financial reporting systems., • Proficiency with Enterprise Content Management solutions (OpenText, SharePoint)., • Familiarity with Microsoft Power BI reporting. ✔ Salary: $50 – $100 Per Hour ✔ Weekly Direct Deposit ✔ Health Insurance (Medical, Dental, Vision) ✔ 401(k) Retirement Plan ✔ PTO + Paid Holidays ✔ Hybrid Flexibility (2–3 days per week on-site) ✔ Exposure to major public infrastructure projects Why Join Us CMCOM is deeply committed to advancing diverse professionals in infrastructure IT. We provide mentorship, access to major infrastructure programs, and the chance to directly shape how technology supports construction delivery in New York’s most critical public works projects. Work Authorization Candidates must be authorized to work in the U.S. without current or future sponsorship. Equal Opportunity Employer CMCOM is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Employment decisions are made without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, veteran status, or other protected status. We strongly encourage applications from minorities, women, veterans, persons with disabilities, and MBE/DBE/SDVOB professionals. Company Description“CMCOM delivers expert construction management and technical oversight for transformative public and private infrastructure projects.” Position Title: Electrical Engineer Location: NY/NJ (Hybrid – On-site/Remote as Directed) Client: Port Authority of NY & NJ – Engineering Department, Quality Assurance Division Consultant: CM-COM (Certified MBE/DBE/SBE) Position Type: Full-Time (40 Hours/Week) – One-Year Contract Compensation Range: $70–$105/hour (W2 ) Anticipated Start Date: September 8, 2025 (subject to change) Position Overview: CMCOM invites qualified Electrical Engineers to join our team on a key infrastructure consulting engagement. As a consultant providing engineering support services to the Port Authority, CMCOM will deploy the selected candidate to serve within the Engineering Department’s Design Standards Unit (DSU). The position focuses on peer reviewing Tenant Alteration Applications (TAA), including medium-voltage systems and other critical electrical design elements. CMCOM Assignment Scope: CMCOM is seeking resumes for one Electrical Engineer to support the Design Standards Unit as part of our consultant contract. The role involves working on-site and/or remotely as directed. Responsibilities include reviewing electrical design documents (above 600 volts), performing design audits, and ensuring compliance with applicable building codes and Port Authority technical standards. Key tasks include assessing TAA submissions, validating load calculations, preparing technical memoranda, coordinating interdisciplinary reviews, and engaging with tenant architects/engineers and facility staff. Expanded Responsibilities at CMCOM: -\tReview tenant electrical designs for completeness, accuracy, and code compliance -\tAnalyze medium-voltage system configurations, arc flash studies, and UPS/load coordination -\tTrack reviews and comments via e-Builder, Bluebeam, and SharePoint -\tCoordinate with agencies like FDNY, FAA, and NYC DOB -\tParticipate in design resolution meetings and stakeholder briefings Minimum Candidate Requirements: -\tBachelor’s degree in electrical engineering -\tMinimum 5 years of electrical design/code compliance experience -\tFamiliarity with medium voltage systems, fire alarms, cathodic protection, and RF -\tProficiency in NEC, NFPA, IEEE standards, and NYC Electrical Code -\tP.E. license in NY and/or NJ (Required) -\tSkilled in MS Office, Adobe, Trimble, and technical platforms Preferred Attributes: -\tExperience with the Port Authority TAA process or similar agency work -\tOSHA 30/NFPA 70E Certification -\tFamiliarity with SKM, ETAP, AutoCAD MEP, and collaboration tools -\tInfrastructure experience in terminals, airports, and tunnels -\tP.E. license in NY and/or NJ (Preferred) Security & Compliance: -\tU.S. Citizen or Legal Permanent Resident -\tMust complete Port Authority NDA and background screening Compensation & Benefits: $70–$105/hour (W2) W2 Benefits: • 401(k), • Health Insurance, • Dental Insurance About CMCOM: CMCOM is a New York–based certified MBE and DBE delivering Construction Management, Engineering, Architecture, and Inspection Services. Since 2012, we've supported over $1.3 billion in infrastructure across NY, NJ, and the Northeast. Our lifecycle services include CM-at-Risk, Agency CM, Design-Build, and P3. CMCOM’s core competencies span construction management, project controls (Primavera P6, TIA, EVM), engineering and architecture (MEP, civil, BIM), field compliance (QA/QC, LL77/LL97), and regulatory oversight (NEPA, air monitoring, DBE/MURK reporting). | delivers expert construction management and technical oversight for transformative public and private infrastructure projects.”\r\n\r\nPosition Title: Electrical Engineer\r\nLocation: NY/NJ (Hybrid – On-site/Remote as Directed)\r\nClient: Port Authority of NY & NJ – Engineering Department, Quality Assurance Division\r\nConsultant: CM-COM (Certified MBE/DBE/SBE)\r\nPosition Type: Full-Time (40 Hours/Week) – One-Year Contract\r\nCompensation Range: $70–$105/hour (W2 )\r\nAnticipated Start Date: September 8, 2025 (subject to change)\r\nPosition Overview:\r\nCMCOM invites qualified Electrical Engineers to join our team on a key infrastructure consulting engagement. As a consultant providing engineering support services to the Port Authority, CMCOM will deploy the selected candidate to serve within the Engineering Department’s Design Standards Unit (DSU). The position focuses on peer reviewing Tenant Alteration Applications (TAA), including medium-voltage systems and other critical electrical design elements.\r\nCMCOM Assignment Scope:\r\nCMCOM is seeking resumes for one Electrical Engineer to support the Design Standards Unit as part of our consultant contract. The role involves working on-site and/or remotely as directed. Responsibilities include reviewing electrical design documents (above 600 volts), performing design audits, and ensuring compliance with applicable building codes and Port Authority technical standards. Key tasks include assessing TAA submissions, validating load calculations, preparing technical memoranda, coordinating interdisciplinary reviews, and engaging with tenant architects/engineers and facility staff.\r\nExpanded Responsibilities at CMCOM:\r\n•\tReview tenant electrical designs for completeness, accuracy, and code compliance\r\n•\tAnalyze medium-voltage system configurations, arc flash studies, and UPS/load coordination\r\n•\tTrack reviews and comments via e-Builder, Bluebeam, and SharePoint\r\n•\tCoordinate with agencies like FDNY, FAA, and NYC DOB\r\n•\tParticipate in design resolution meetings and stakeholder briefings\r\nMinimum Candidate Requirements:\r\n•\tBachelor’s degree in electrical engineering\r\n•\tMinimum 5 years of electrical design/code compliance experience\r\n•\tFamiliarity with medium voltage systems, fire alarms, cathodic protection, and RF\r\n•\tProficiency in NEC, NFPA, IEEE standards, and NYC Electrical Code\r\n•\tP.E. license in NY and/or NJ (Required)\r\n•\tSkilled in MS Office, Adobe, Trimble, and technical platforms\r\nPreferred Attributes:\r\n•\tExperience with the Port Authority TAA process or similar agency work\r\n•\tOSHA 30/NFPA 70E Certification\r\n•\tFamiliarity with SKM, ETAP, AutoCAD MEP, and collaboration tools\r\n•\tInfrastructure experience in terminals, airports, and tunnels\r\n•\tP.E. license in NY and/or NJ (Preferred)\r\nSecurity & Compliance:\r\n•\tU.S. Citizen or Legal Permanent Resident\r\n•\tMust complete Port Authority NDA and background screening\r\nCompensation & Benefits:\r\n $70–$105/hour (W2)\r\n W2 Benefits:\r\n• 401(k)\r\n• Health Insurance\r\n• Dental Insurance\r\n• Vision Insurance\r\nHow to Apply:\r\nSubmit your application via Indeed or email to by August 15, 2025. Include:\r\n•\tUpdated Resume (PDF or Word)\r\n•\tPE License (if applicable)\r\n•\tAvailability & Pay Preference (W2)\r\n•\t Subject: Electrical Engineer Submission\r\n________________________________________\r\nAbout CMCOM:\r\nCMCOM is a New York–based certified MBE and DBE delivering Construction Management, Engineering, Architecture, and Inspection Services. Since 2012, we've supported over $1.3 billion in infrastructure across NY, NJ, and the Northeast. Our lifecycle services include CM-at-Risk, Agency CM, Design-Build, and P3. CMCOM’s core competencies span construction management, project controls (Primavera P6, TIA, EVM), engineering and architecture (MEP, civil, BIM), field compliance (QA/QC, LL77/LL97), and regulatory oversight (NEPA, air monitoring, DBE/MURK reporting).\r\n |

Job DescriptionPOSITION SUMMARY: The Project Engineer is a professional with 10-15 years of experience. This individual will design and/or manage a variety of infrastructure projects (owned by municipalities and local school districts) and will report directly to the principal. Such projects shall include roads, underground utilities, public buildings, recreational facilities, and land use applications submitted by private developers. PRIMARY DUTIES: • Responsible to act as the client manager to one or more municipalities or other public agencies. The client manager will act as the single point of contact between the firm and the client. He/she will supervise and coordinate all projects performed in the firm on behalf of the client, to the client’s satisfaction., • Develop or implement engineering solutions to assist clients with improving and maintaining their infrastructure., • Design transportation, utility, facility, or hydraulic systems or structures (as appropriate) using computer assisted design or drawing tools., • Compute load and grade requirements, water flow rates, or material stress factors to determine design specifications., • Estimate quantities and cost of materials, equipment, or labor to determine project feasibility., • Analyze survey reports, maps, drawings, blueprints, aerial photography, or other topographical or geologic data., • Conduct studies of traffic patterns or environmental conditions to identify engineering problems and assess potential project impact., • Perform all design activities ensuring compliance with environmental, safety, or other governmental regulations., • Identify environmental risks and develop risk management strategies for projects., • Attending regularly scheduled public meetings (conducted by Municipal clients) in the capacity of Municipal Engineer, or Land Use Board Engineer. Prepare and present public reports on topics such as bid proposals, project status reports and developmental review projects., • Provide technical advice to clients regarding design, construction, or capital program modifications., • Support of the field activities of our construction inspection staff, including providing timely data, shop drawing review, and client coordination. KNOWLEDGE, SKILLS and ABILITIES: • Municipal Engineering experience preferred but not required., • Strong oral and written communication skills, • Ability to make public presentations., • Ability to define problems, collect data, establish facts and draw conclusions to present to co-workers and clients., • Strong organizational skills and attention to detail, • Knowledge of computer aided design software., • Ability to work in groups as well as individually.EDUCATION/EXPERIENCE:, • Bachelors of Science Degree in Civil Engineering from an accredited four-year college or university CERTIFICATIONS/LICENSES REQUIRED • PE License Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasionally lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job Description Under minimum supervision working from blueprints, sketches written and/or verbal instructions, sets up and performs the most diversified and complex progressive machining, fitting and assembly operations. Determines proper tooling and sequence of operations, and skillfully uses all machinists’ hand tools and machine shop measuring equipment in order to produce work to specifications. Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tool to be used. ESSENTIAL FUNCTIONS • Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tools to be used., • Must be able to skillfully use all machinist’s hand tools and measuring instruments., • Must be familiar with the machining of most materials., • Must be able to use advanced shop math, including trigonometry., • Moves parts to and from the work area., • Maintains good housekeeping in the work area., • Meets all safety requirements in the machine shop and follows all company policies., • Requires a High school diploma or equivalent education, • Requires the completion of an apprenticeship program or similar on the job experience of approximately four years or at least five years experience as a machinist., • Ability to operate standard and specialized equipment to produce prototype and/or production parts, • Ability to perform standard shop computations, using technical math, geometry and trigonometry., • Proficient use of set up and operation of CNC machining center., • Proficient use of tool and surface grinders, • Proficient use of all shop inspection equipment, including but not limited to, CMM, comparator, digital height gages, micrometers, etc., • Moderate physical activity. The job location is at 2 Lawrence Road, Springfield, NJ 07081 We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description PVEDI is currently recruiting for Civil & Structural Engineering Student for our 2026 Intern season. Intern/Co-Op students at PVEDI have the opportunity to work closely with experienced engineers and project managers on current projects. Special training is given to co-op/interns on design, technical drawings, software, site visits, inspection and client communications. Our co-op/intern student are not watching the work, they are doing the work. Feedback is provided on performance and skill and training goals are established before the internship or co-op program starts. PVEDI provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, PVEDI complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. PVEDI expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status.

Job DescriptionProduction CoordinatorLHH Recruitment Solutions is currently seeking a Production Coordinator with 3 years of experience working in a similar role. This is a Direct Hire opportunity, located in Manhattan, New York. Responsibilities: • Interpret and translate customer manuals into actionable production plans – Develop comprehensive production manuals for each account, detailing inspection protocols, testing requirements, packaging standards, and trim specifications., • Manage Purchase Orders from creation to completion – Generate and format POs in alignment with customer specifications; oversee edits, updates, and tracking throughout the production cycle., • Coordinate directly with overseas partners – Communicate timelines and shipping schedules to ensure alignment with customer expectations and delivery requirements., • Monitor and maintain the Time and Action calendar – Track key milestones including licensing and buyer approvals, lab testing, and inspections to support on-time delivery., • Collaborate with sales teams – Provide timely updates on production status and order timelines to support customer communication and planning., • Engage daily with cross-functional teams – Work closely with Sourcing, Packaging, Licensing, and Product Development to gather essential information for production execution., • Lead weekly Product Development meetings – Address production-related concerns and ensure alignment across teams., • Coordinate vessel bookings with the Import team – Schedule shipments to meet delivery deadlines and customer requirements.Experience:, • 3-5 years of Production or Merchandising experience Worksite: OnsiteEmployment Type: Direct HireSalary: $60,000-65,000/yr Pay Details: $60,000.00 to $65,000.00 per year Search managed by: Patrick Garron Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Position: Facilities Manager Position Reports to: Managing Director of Operations Hours: Monday-Friday 7:00am-4:00pm, with some after hours responsibilities, including some weekends Compensation: $70,000 - $82,000 (Please note this is a set range - salaries are determined within this range based on years of experience. EHTP also offers a comprehensive benefits package). Who We Are Founded in 1958 as a children's reading group, East Harlem Tutorial Program (EHTP) has grown into a dynamic multi-site after-school program for students in traditional public schools and a network of public charter schools dedicated to dramatically increasing the college graduation rate in East Harlem. We believe that all young people deserve access to an excellent education without having to leave their community. East Harlem is a vibrant neighborhood that has long faced systemic educational inequities, and we work in close partnership with students and families to help them unlock their limitless potential. Our schools and programs provide rigorous, engaging academics combined with holistic support, ensuring that students develop the critical thinking skills, confidence, and knowledge necessary to excel in college and beyond. At EHTP, we strive to be an agent of change in the fight for racial equity, recognizing that education is a powerful tool for transformation. Through a rigorous, student-centered curriculum, we prepare our scholars to challenge the status quo, think critically, and become leaders who shape a more just world. Our commitment to anti-racism is woven into every aspect of our work—from our instructional practices and professional development to our organizational policies and community engagement. As educators and staff, we continually examine our own biases and identities, ensuring that our classrooms and programs are spaces of inclusion, empowerment, and academic excellence. Read our racial equity statement here. About the Opportunity Our students, families and staff are able to fully engage with each other and their classes when our spaces are universally designed and maintained. In order to ensure that every space is safe, organized, and maintained to meet the needs of students and families, the facilities manager supervises a team of facilities staff to maintain an in-depth knowledge of the use of each space, supervises third-party clearing services, and leads managing inspections and compliance. What Success Looks Like Building Safety • Regularly check fire extinguishers, AED, sprinkler, and alarm systems for functionality and maintenance needs., • Maintain evacuation plans and logs, • Hold and maintain F-07 Fire Drill conductor license., • Hold and maintain S95 sprinkler system inspection license., • Work with the Managing Director of Operations to create a weekly custodial schedule that ensures consistent support and cleanliness at each building., • Maintains a clear storage and tracking system for custodial supplies at each building., • Ensures commonly used cleaning supplies are fully stocked and easily accessible to staff., • Supervise and train on-site custodial staff, • Perform minor repairs and maintenance throughout the building, including, but not limited to:, • Furniture assembly and relocation, • Touch-up painting, • Event set-up and breakdown, • Supervise third-party contractors hired for ad hoc projects, • Open and supervise building during weekend events and projects, • Belief in East Harlem Tutorial Program's mission, core values, and racial equity statement, • You hold yourself to high professional and ethical standards, • You enjoy and/or have experience working alongside and building positive, healthy relationships with diverse populations of students and communities, • You have 1-2 years of experience in commercial cleaning and maintenance, • You have or are able to pass the F07 Fire Safety Exam within one year of hire, • You have or are able to pass the S95 Sprinkler/Standpipe Exam within one year of hire

Job Description DRPILLA is currently seeking a Mid Level Structural Project Engineer to join our structural group within our Nyack, NY office. The candidate will be involved in and complete all phases of structural project development including planning, scheduling, inspection as required, analysis, design and technical specifications and reports. Individuals will perform complex building analysis on all design phases, structural modeling, structural calculations, and plan production for a wide variety of projects including schools, health care centers, higher education facilities, office buildings, industrial buildings, commercial buildings, and residential structures. RESPONSIBILITIES · Coordination of project plans, design calculations, specifications and lead the coordination with other design disciplines as required to deliver high quality engineering services. · Attend meetings and site visits with clients as a representative of the firm. · Lead site investigations to observe and document existing conditions and document structural deficiencies. · Perform condition assessments, load ratings, schematic designs and prepare written reports to summarize the results of the investigation. · Communicate with clients to understand project requirements. · Plan and formulate engineering program and organize project staff according to project requirements. · Perform analysis and design of structural systems for all types of buildings and materials using various building codes. · Manage project design and deliverables. QUALIFICATIONS · Bachelor of Science in Civil/Structural Engineering; Master’s Degree a plus · 7+ years’ experience in Structural Engineering · NY PE required · Ability to manage projects, clients, delegate tasks, and provide guidance to technical staff · Understanding and application of code requirements · Experience in using various structural analysis software · Strong written and verbal communication skills · Ability to multitask and consistently meet deadlines · AutoCAD and Revit experience a plus Work Remotely  No Job Type: Full-time Benefits:  401(k)  Dental insurance  Health insurance  Paid time off  Vision insurance Compensation Package:  Bonus opportunities Schedule:  8 hour shift Application Question(s):  This is a Full Time in Office Position Ability to Relocate:  Nyack, NY 10960: Relocate before starting work (Required) Work Location: In person Company DescriptionOur focus is the practice of general building engineering through which we provide an imaginative and responsive approach to spatial problems involving the built environment. We are a diversified group of building professionals able to provide comprehensive services. Our experience in varied types of projects allows us to provide a unique professional service not commonly offered. Our integrated services are provided to architects, building owners and developers at all project stages. We offer a suite of specialty analyses, either as standalone services or as part of a broader scope, that solve complex design challenges, improve constructability and maximize energy efficiency.Our focus is the practice of general building engineering through which we provide an imaginative and responsive approach to spatial problems involving the built environment. We are a diversified group of building professionals able to provide comprehensive services. Our experience in varied types of projects allows us to provide a unique professional service not commonly offered. Our integrated services are provided to architects, building owners and developers at all project stages. We offer a suite of specialty analyses, either as standalone services or as part of a broader scope, that solve complex design challenges, improve constructability and maximize energy efficiency.

Job Description Job Description Facilities Coordinator Safety/HVAC Energy System and Facilities Management The West Side Federation for Senior and Supportive Housing, Inc. (WSFSSH) is a community-based organization whose mission is to provide safe, affordable housing with supportive services within a residential setting which enhances the independence and dignity of each person. WSFSSH develops, manages, and provides housing for low- income older persons, many of whom live with mental illness and/or have experienced homelessness. WSFSSH currently owns and operates nearly 2400 units in 29 buildings located in Manhattan and the Bronx. POSITION DESCRIPTION Under the direct supervision of the Facilities Manager and the overall supervision of the Director of Property and energy Conservation Management, the Fire Safety, HVAC Energy Systems and Property Manager will assist with specific projects and tasks at each building and work closely with all supers to carry out these special projects and specific tasks within the buildings and on the grounds. Under the supervision of the Construction Manager, the Fire Safety, HVAC, Energy Systems and Facility Manager will be responsible to ensure that all systems are working properly in a timely manner before heating season sets-in. Specific responsibilities will include: • Ensure Fire Safety, Ensure that our buildings are meeting all fire safety codes. Resolve all fire violations. Schedule on-site meetings with all our fire safety consultants and contractors, • Ensure OSHA Safety. Coordinate Agency Safety committee., • Schedule and coordinate all service contracts and on-site meetings with all Directors, Managers, Supers, and all Contractors. Keep all service and laundry contracts up to date. Ensure control sheets are accurate and current. Make sure everything is saved on shared drive., • Work collaboratively with the Facilities Manager to ensure a comprehensive, well integrated HVAC system that works properly and efficiently., • Obtain and review all logs with all Supers, • Obtain all boilers, fire, HVAC elevator preventive maintenance service field reports from our Supers and our service contractors and follow up as required., • Along with Facilities Manager ensure that proper preventive maintenance is being done in all of our buildings by our Supers and Contractors. Ensure all preventative maintenance logs are current including, HVAC, fire systems, electrical, extermination, etc, • Along with Facilities Manager obtain and review all elevators preventive maintenance logs with all Supers and all elevator service contractors. Ensure that we are 100% code compliant., • Develop a comprehensive building inspection schedule and protocol. Inspect all buildings semiannually with the Facilities Manager. Write reports and follow up as required, • Encourage all Supers to register and attend the Super’s Technical Club. Ensure all Supers obtain their NYCFD and other required Certificates., • Assist the Insurance Department as needed to ensure MVA and insurance and COVID protocols are all current, • Maintain vans Additional Responsibilities: • Maintain high level of respect and care for tenants., • Maintain confidentiality as mandated by the WSFSSH Confidentiality Policy., • Work cooperatively with other WSFSSH staff., • Attend training sessions and conference as required for enhancement of job skills., • Attend supervision regularly., • Attend community meetings, and work with other community groups as directed., • Attend staff meetings as directed., • At least 21 years of age, • Minimum of 5 years of experience in this field., • Strong attention to detail and ability to follow-up, • Certifications S12, S13, S95, F01, OSHA ten-hour preferred, • Emotionally, mentally, and physically able to perform job responsibilities. Powered by JazzHR EaVZgRBhJG