Trabajos it field technician en Jacksonville, FloridaCrear alertas

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: The Special Events Service Technician is responsible for operating a company service truck and driving to various locations at an event to service/pump/clean portable restrooms or holding tanks. This position also performs basic pick-up and delivery of units and the installation and removal of temporary fences at special events. Workdays are Thursday - Monday. The Special Events Service Technician must be willing to travel to support special events throughout the region and to support other regions as needed. This is a Seasonal position. A seasonal employee is an employee who is hired in a job for a temporary period or for a specific assignment or group of assignments designed to last for less than 180 days. Seasonal employees normally are not eligible for participation in Company benefits, except as otherwise required by applicable law. Seasonal employees are not eligible for merit pay increases. Responsibilities: • Conduct daily pre-shift vehicle inspection & report deficiencies to management immediately. Conduct daily inspection of all tools assigned to the truck to ensure safety and proper working condition. Check loads to ensure that truck has all material (units, fence panels, poles, etc.) and tools needed to complete service tickets, • Operate service trucks to and from pre-designated work sites based on assignment information. Maintain a clean and fully stocked truck, • Operate flatbed trucks to and from pre-designated work sites based on daily routing information to deliver or pick up portable restroom units, hand sinks, holding tanks, or containers. Update system and tickets with relevant delivery or pick-up detail, • Operate fence trucks to and from pre-designated work sites based on daily routing information to deliver or pick up the fence (chain link, panel, materials, etc.). Also, act as a point of contact on fence jobs where a crew is assigned to the job/truck and will operate fence installation equipment, • Operate tanker/transfer truck to and from the local dump and completes required paperwork as necessary, • Service portable restrooms, holding tanks, septic tanks, sinks, showers, etc., at various work sites by following the Company's servicing guidelines. Notifies management of any issues encountered on route assigned, • Unload all fence materials and install fence panels, with appropriate tools, at the work site in accordance with pre-determined specifications. Locate, measure, and mark the location for placement of panels & installation, • Troubleshoot and address all basic repair and maintenance as needed on-site so as to not disrupt the customer experience. Report all special maintenance requests and/or equipment replacements in FSL, • Perform pick-up and delivery of United Site Services (USS) units at customer locations in a timely manner in accordance with customer needs, • Strategically plan for customer needs by discussing their pickup and delivery needs, so the customer's current and future needs are satisfied, • Work with dispatch to keep updated on service schedule changes throughout the day and adapt to changes as needed, • Conduct all work duties in a safe manner in accordance with USS and DOT safety standards to ensure no accidents or injuries, • Interact with customers on-site to ensure they are getting the services completed to their standard, • Work with Operations Manager/Supervisor/Coordinator by providing customer feedback as it relates to service needs and expectations, • Meet with site superintendent (or other designated representative) to confirm work order, • Maintain telephone or radio contact with supervisor to receive additional instructions, changes to work locations, etc, • Maintain truck log according to state and federal regulations, • Perform other duties as assigned Qualifications:, • Minimum two years of commercial driving experience., • Valid Commercial Driver's license (Class CDL A or B with endorsement or Class C, D, or E (depending on state)., • Excellent time management, customer service and communication skills., • Strong problem-solving and decision-making skills., • Ability to meet deadlines. Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP), • Employee Discounts Salary Range: $27.58 – $39.99 / hour Pay Transparency Statement: At United Site Services, our salary ranges reflect the minimum and maximum base pay for the posted position applicable to all locations across the US. Within the posted salary range, individual pay is determined by the geographic location, job related skills, experience, education, and certifications. Our total compensation package includes base pay plus a comprehensive benefits program. EEO Statement: Some positions may require secure site access and/or domestic air travel. All candidates for positions which require secure site access and/or domestic air travel must possess an acceptable form of identification to comply with state and federal regulations, such as REAL ID-compliant driver’s license or state ID, or U.S. passport. This statement is not intended to require documentation beyond what is acceptable under the federal I-9 form process administered by the U.S. Citizenship and Immigration Services (USCIS); and should not be construed as creating additional employment eligibility verification requirements. United Site Services is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers.

Job Description NorthPort Heating and Air Conditioning of Jacksonville, FL is looking to hire a full-time Helper / HVAC Technician to help our technicians and installer save the day. Are you developing your mechanical abilities? Would you like an exciting career with a local company that dominates the market in an essential skilled trade? Do you believe in doing what's right above all else? If so, please read on! This Helper / HVAC Technician position earns a competitive wage of $10.00 - $15.00/hour, depending on experience, plus overtime opportunities. You would also be eligible for great benefits including paid holidays, paid vacations, 401(k), sick time, and advancement opportunities! If this sounds like the right opportunity for you to join our league of HVAC superheroes, apply today! ABOUT NORTHPORT HEATING AND AIR CONDITIONING NorthPort Heating and Air Conditioning is a family-owned heating and air conditioning service provider located in Jacksonville, Florida. We have made our company successful by building long-term relationships with our customers and offering them continued support even after the completion of our services. Our company's philosophy is simple: Treat every customer with respect as if they were our only customer. Here at NorthPort, we understand that in order to maintain great relationships with our clients, we also have to maintain great relationships with our employees. In addition to competitive pay and benefits, we offer a positive work culture and opportunities for career development. This is why our employees love working with us! A DAY IN THE LIFE OF A HELPER / HVAC TECHNICIAN As a Helper / HVAC Technician, you get to go out in the field as a sidekick to our installers and technicians. As you assist them, they mentor and train you on everything from how to talk with customers to how to properly install and service equipment. You ask questions, observe, and emulate the values we adhere to here at NorthPort. Always happy to do what is asked of you, you learn to complete duct cleanings, organize our shop, complete pickups, handle returns, and run errands on your own. You are proud to play an essential part on this team and are considering a career in this skilled trade! The main service area is in Jacksonville, but we also cover jobs in St. Augustine (St. Johns), Fernandina Beach (Nassau County), Macclenny (Baker County), Orange Park (Clay County). QUALIFICATIONS FOR A HELPER / HVAC TECHNICIAN • Super strength and agility (or at least the ability to lift up to 50 lbs. and work from heights), • Shrinking powers and heatproof (or at least the ability to work in cramped areas such as crawl spaces and outside in a variety of weather conditions), • Ability to use tools safely READY TO JOIN OUR TEAM? If you are ready to see if you have what it takes to succeed in this essential skilled trade, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Location: 32207 Must have the ability to pass a background check and drug screening.

Job Description Are you an experienced HVAC technician looking for a new and exciting challenge? Are you seen as the "Go To" when your coworkers, family, or friends have questions regarding anything marine? Have you ever thought about training the next generation of Technician. Jones Technical Institute might have an amazing opportunity for you to become a Technical Instructor. Never taught? No problem! If you have the drive, patience, and skills we'll train you! Why not take the next step to make that happen for the next generation of technicians. Nothing is more rewarding than seeing the student you taught succeed, knowing you were the one that made it happen! Position Overview: As a Technical Instructor, you'll play a pivotal role in shaping the minds and skills of our students. Your expertise in gasoline and diesel engines, diagnostics, and repair will be the guiding light that leads them to a promising career in many different industries. We believe that hands-on learning is the key to success, so get ready to dive into the world of interactive teaching and inspire the next generation to conquer the challenges of modern marine technology. What We Offer: • $27 - $29 per hour base salary, • Night Compensation incentives, • Weekends OFF, • Paid Training, • Discounted Tuition for you AND your Immediate Family, • Medical/Dental/Vision/Life Ins/STD & LTD Ins, • 401K with employer sponsored matching, • Minimum of 11 Paid Holidays, • Robust Paid Time Off Schedule Responsibilities: • Inspire and Educate: Create an engaging and inclusive learning environment where students can flourish, fostering their passion for welding while imparting your expert knowledge., • Hands-On Training: Lead by example and provide practical demonstrations, ensuring students gain real-world experience., • Curriculum Development: Collaborate with our education team to enhance existing courses and develop new ones that align with industry trends and advancements., • Mentorship: Guide and mentor students on their individual projects, encouraging them to think critically and find innovative solutions., • Education: High school diploma or GED, • Experience: 3 years of practical work experience in the field, • Communication Skills: Strong communication and interpersonal skills, enabling you to effectively connect with students and fellow staff Compass Rose Foundation (CRF) is an 80-year-old Florida chartered non-profit organization that fulfills its mission by governing postsecondary institutions. Steeped in the management of career-oriented institutions, its current charge is the development of trade and technical schools. Under this endeavor, CRF has one institution within its auspice of control. Jones Technical Institute (J-Tech), located in Jacksonville offers programs in Automotive, Diesel, Marine & RV Technology as well as HVAC-R and Commercial Truck Driving, Welding and soon to be Network Administration and Security. J-Tech, founded in 2013, is located on the south side of Jacksonville. Our campus is comprised of 28 acres and 168,000 square feet. Since its founding, our Automotive and Diesel programs have produced over 1500 graduates while its Commercial Truck Driving program has assisted almost thousands of graduates obtain a Class A Commercial Driver’s License. We encourage you to review each of the following websites to learn more about who we are: • www. compassrosefoundation.org

Job Title: Bomb Technician (EOD) Category / Component: Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide. Key Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State. What to Expect Global missions in every environment, from parachuting into remote terrain to arriving by small boat on foreign shores; majority of time spent in the field conducting high risk, time critical tasks with strict safety and risk management; regular integration with Special Operations, fleet units, and interagency partners; intense physical and mental demands with a culture that values precision, calm decision making, and discipline. Work Environment Operate worldwide on land, at sea, and underwater from EOD Mobile Units and detachments; insert via parachute, helicopter, and small boats; work from ships, shore commands, and forward locations; serve in small team based units that balance training, readiness, and operational tasking with limited administrative overhead compared to field work. Pathways, Training & Advancement Recruit Training followed by an EOD preparatory course at Great Lakes, Illinois, that builds swimming, conditioning, small boat skills, and risk management fundamentals; EOD Assessment and Selection Course that evaluates aquatic adaptability, running, swimming, academics, professionalism, and teamwork; Navy diver training at the Naval Diving and Salvage Training Center; Naval School Explosive Ordnance Disposal, which covers demolition, conventional ordnance, underwater mines, missiles, landmines, and chemical, biological, radiological, and nuclear threats; Basic Parachute Training and ongoing advanced training and qualifications throughout a career. Apply for the Navy Warrior Challenge contract for EOD during initial enlistment, then pass the EOD Physical Screening Test and diver medical screening; complete required assessments and receive recommendation and screening from an EOD officer or senior enlisted EOD technician; additional in service accession requirements may include minimum time on board, performance standards, and command endorsement. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Eyesight correctable within EOD diving standards, with no color blindness; qualifying ASVAB scores using combinations such as arithmetic reasoning and verbal expression or general science, mechanical comprehension, and electronics information; age typically 30 or younger at accession; United States citizenship and eligibility for a security clearance; excellent physical condition and swimming ability, with the capacity to perform detailed technical tasks under stress and in hazardous environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Description Maintenance Technician At PODS, we pioneered portable storage and moving solutions—and our iconic containers are at the heart of everything we do. Our containers are more than equipment—they represent our brand, our safety standards, and our commitment to customers. As a Maintenance Technician, you’ll play a critical role in keeping our containers and facilities in top condition. This is an opportunity for a skilled, hands-on professional who takes pride in quality work, values safety, and enjoys working independently in a fast-paced environment. If you’re experienced with power tools, comfortable working with your hands, and committed to doing the job right the first time, we want to meet you! What You'll Do As a Maintenance Technician, you are the reason our customers feel confident trusting us with their belongings. Your day-to-day includes: • Performing a wide range of repair tasks using hand and power tools with minimal to no supervision, • Completing general carpentry repairs, painting, caulking, cutting, and cosmetic container repairs, • Operating forklifts safely (we’ll certify you if you’re not already certified), • Operating standard shop equipment and performing all required cutting operations safely, • Pressure washing and cleaning containers, • Safely rigging and lifting materials as part of repair work, • Moving materials using hand carts and assisting with staging and organization, • Following repair instructions and technical guidance while exercising sound judgment in execution, • Helping maintain a clean, safe, and organized warehouse environment, inside and out What You Bring to the Workbench • High school diploma or equivalent, • 3–5 years of experience in construction, building trades, assembly work, or a related hands-on field, • Proven experience using hand and power tools independently, • Ability to read and understand English in compliance with OSHA safety requirements, • Basic math skills for measurements and calculations, • Ability to become forklift certified and safely operate material-handling equipment, • Valid driver’s license with a clean driving record, • A safety-first mindset and attention to detail, • Strong time management skills and ability to prioritize tasks, • Solid work ethic—regular attendance and punctuality are essential Working Conditions & Physicality This is a high-energy, physical role. You’ll be: • Working in a warehouse/repair center that feels the seasons (non-climate controlled), • Standing, walking, kneeling, and crouching—sometimes working above head level or on a ladder, • Lifting and carrying items weighing up to 60 lbs., • Working a flexible schedule that may include Saturdays and overtime when the business is booming Why You’ll Love Working at PODS • Competitive compensation with opportunities for overtime., • Comprehensive benefits including medical, dental, vision, 401(k) with match, paid time off, holidays, and more., • Hands-on work with variety—no two days are exactly the same., • Supportive team culture built on our core values: We Care, We Work as a Team, and We Find a Way, • Ongoing training, including forklift certification, and real opportunities to grow your skills Compensation Our salary ranges are based on paying competitively for our company's size and industry and are one part of the total compensation package that also includes incentives, benefits, and other opportunities at PODS. In accordance with New York, Colorado, California, Washington and other applicable laws, PODS is required to provide a reasonable estimate of the compensation range for this role. Individual pay decisions are ultimately based on several factors, including qualifications for the role, experience level, skillset, geography, and balancing internal equity. A reasonable estimate of the current salary range is listed below. Pay Rate: $18.00 Ready to Build Your Career With PODS? Our Maintenance Technicians are trusted professionals who take pride in their work and play a key role in delivering a quality experience to our customers. If you're a dependable, skilled tradesperson looking for a role where quality matters and your work is valued, apply today. DISCLAIMER The preceding job description has been designed to indicate the general nature of work performed; the level of knowledge and skills typically required; and usual working conditions of this position. It is not designed to contain, or be interpreted as, a comprehensive listing of all requirements or responsibilities that may be required by employees in this job. Equal Opportunity, Affirmative Action Employer PODS Enterprises, LLC is an Equal Opportunity, Affirmative Action Employer. We will not discriminate unlawfully against qualified applicants or employees with respect to any term or condition of employment based on race, color, national origin, ancestry, sex, sexual orientation, age, religion, physical or mental disability, marital status, place of birth, military service status, or other basis protected by law. If there are any questions pertaining to this job posting, please contact PODS Recruiting Team at

Experienced Veterinary Assistant - General Practice VCA All Animal Hospital of Orange Park | Full-Time VCA All Animal Hospital of Orange Park is seeking an Experienced Veterinary Assistant to join our General Practice team full time ! Are you looking to join a committed team of professionals that has pioneered growth in the veterinary field? Do you want to advance your skills in a supportive, collaborative environment? Our team shares a deep devotion to providing progressive medicine with compassion as our driving force , and we are eager to welcome a like-minded individual! Why Join the VCA All Animal Family? All Animal Hospital has been providing skilled veterinary care in a warm, friendly atmosphere for family pets in Orange Park since 1980. Our full-service clinic offers: * General pet wellness care * Veterinary surgery * Advanced diagnostics * Preventive medicine and client education We are AAHA-accredited, demonstrating the highest level of veterinary medical care and client service. We are proud of our strong reputation and strive to exceed expectations every day. Veterinary Assistant Duties * Anesthesia induction, monitoring, and recovery * Collecting patient histories and assisting with physical exams * Venipuncture and IV catheter placement * Laboratory sample collection and processing * IV, IM, and Subcutaneous medication administration * Client education and counseling * Working collaboratively with veterinarians and all hospital departments * Providing compassionate, high-quality nursing care to all patients Schedule Monday-Friday: 8:00 AM - 6:00 PM Rotating Saturdays: 8:00 AM - 12:00 PM Flexible scheduling available Compensation $17 - $26 per hour , based on skill set, experience, and licensure status * Veterinary Assistant (VA): $17 - $20/hr * Credentialed Veterinary Technician (CVT): $20 - $26/hr What Makes All Animal Hospital of Orange Park Unique? Our leadership team is compassionate, supportive, and deeply invested in your success. We truly care about the health and well-being of our team and maintain a strong culture of appreciation and connection. VCA Benefits & Perks * Access to the people and resources of a large veterinary community * Free NAVTA Membership & RECOVER Training * Discounts on Fear Free Certification & VetGirl * Growth & leadership development opportunities * Medical, Dental & Vision Insurance * Career development programs * Veterinary Technician education tuition support & scholarships * $750 Continuing Education funds for credentialed associates * Veterinary Technician license reimbursement * Generous hospital and product discounts * Employer-paid life, short-term & long-term disability insurance * Paid vacation and sick time * Paid parental leave * 401(k) * Free mental health resources & wellness subscriptions (Headspace) * Referral bonuses * Infertility benefits * Competitive wages * Free access to Plumb's, VetFolio, and additional education platforms Why You Should Consider Us This role is ideal for an experienced Veterinary Assistant or Credentialed Technician-but we are also excited to support someone early in their career who is eager to grow and develop their technical skills in a hospital that offers broad learning opportunities. * Positive, motivated, and team-oriented * Open to feedback, growth, and collaboration * Engaged, adaptable, and goal-driven * Willing to multi-task and rise to challenges in a fast-paced environment Our team meets frequently, and your ideas and input are encouraged. We work hard to protect our culture and are committed to hiring associates who will contribute positively to our supportive, respectful workplace. Ready to grow with us? Apply Today! We look forward to hearing from you! Location: 760 Blanding Blvd Orange Park, FL 32065 This position description reflects the general nature of work performed and is not intended to be a comprehensive list of duties. Management reserves the right to revise the job description or assign additional tasks as needed. We are proud to be an Equal Opportunity Employer - Veterans / Disabled. For a complete EEO statement, please visit our career page at vcacareers.com If you are a current associate, you will need to apply through our internal career site. Please log into Workday and click on the Jobs Hub app or search for Browse Jobs. Benefits: We offer competitive compensation along with a comprehensive benefits package, including medical, dental, vision and paid vacation/sick days, 401(k), generous employee pet discounts and more! The information in this position description indicates the general nature and level of work to be performed. It is not designed to be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. Management reserves the right to revise the job description or require that other tasks be performed when the circumstances of the job change (for example, emergencies, change in personnel, workload, or technical development) We are proud to be an Equal Opportunity Employer - Veterans / Disabled. For a complete EEO statement please see our career page at vcacareers.com

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: General Maintenance Technician National maintenance and construction firm is recruiting General Maintenance Technician, willing to travel for full-time commercial construction projects across the United States. JOB REQUIREMENTS: Tradesperson must be proficient in following skills: Carpentry • partition framing metal/wood studs, installation of basic cabinetry/countertops, installation of doors/windowPainting, • interior & exteriorFlooring, • replacement/installation of sinks, faucets, toilets and basic drainage and water lines (licensed plumbers encouraged to apply)Electrical, • replacement installation of light fixtures, switches and outlets, capable of basic data connections and able to diagnose minor electrical problems (licensed electricians encouraged to apply) HVAC, • Knowledge of refrigeration, PM Service callsESSENTIAL FUNCTIONS:, • Commercial renovations/buildouts, • Basic computer skills, • Ability to follow OSHA requirements, • Presentable and possess the ability to communicate with customers to build relationships, • Detailed when it comes to repairs made, including but not limited to measurements, pictures, recommendations for repairs and quotes, • Ability to work overtime and/or on-call as workload and emergency issues dictate, • Willing and able to travel and work overnight shifts throughout the United States when needed.EDUCATION/EXPERIENCE:, • Minimum of 3 years of experience in construction or commercial maintenance, • Supply basic construction hand tools, • OSHA 10hr or the completion of OSHA 10hr within 3 months of employment (paid by employer)BENEFITS OFFERED:, • Medical, Dental & Vision Insurance, • 401-K Retirement plan with generous company match, • Paid vacations, • Company paid travel & per diem Powered by JazzHR 2Ti3Ks7n3h

Job DescriptionBenefits: • Bonus based on performance, • Company car, • Company parties, • Free uniforms, • Opportunity for advancement A Day in the Life of a Surface Experts Technician: WE OFFER: • Base Salary + Bonus Opportunity: Performance-based commissions starting on day 1, • Great Work/Life Balance: No required overtime, no nights, no weekends, • Time Off: Paid holidays and accruable vacation, • Flexible Work Schedule: Can accommodate midweek appointments, • Paid New Hire Training: Onboarding includes learning alongside a trained technician, • Company Car: Each technician drives a branded company vehicle for job duties, • Tools Included: All necessary tools and products are provided, • Learn a New Trade: Develop skills in a brand-new emerging trade, • Supportive Work Environment: Team celebrates achievements and collaborates in their approach to problem-solving, • Small Business: Local business with an owner who works alongside the team each day, • Mentorship Opportunities: Ongoing repair training and career development, • Dedicated Help Lines: Technician Support Team on call to assist to questionsDUTIES: In the Field Daily • Visit 4+ jobsites every day, • Repair damage on the job site while using exceptional customer service to follow up with staff, • Employ your creativity in several settings such as apartments, hotels, commercial buildings, and building sitesCustomer Service and Communication, • Use outstanding customer service to engage with staff and tenants, • Keep progress up to date with notes and updates in our CRM/Dispatch tool, • Reach out to our Support Team on any issue or questionFollow Repair Process, • Develop an understanding of our own 5-step repair process and use it in the field, • Master each part of your custom-made tool-kit, • Think outside the box to create one-of-a-kind repairsWe are in search of someone with experience in painting. This could be interior or exterior painting, or even painting in a visual art sense. Your knowledge of color and paint application will assist in the color matching portion of the repair process. QUALIFICATIONS • Practical experience with a hands-on trade Example include any part the construction, manufacturing, or painting process. Personal hobbies could work too!, • Maintenance experience is beneficial but not mandatory., • Color is a fundamental part of our work, and the ability to understand and manipulate color is crucial for success.ABOUT SURFACE EXPERTS Surface Experts does it all: Floors, Countertops, Bathtubs, Cabinets, Appliances, Furniture, Elevator Panels Almost Everything! We aim to be the one place fixes all for any kind of small surface damage. • Traditional skills meet modern solutions: We deliver high-quality, long-lasting repairs with a smile., • While many of our repairs are relatively small and straightforward, our competitors always want to completely resurface. Our repairs are often smaller than a dinner plate. This superior alternatives results in satisfied customers and long-term relationships. Our process minimizes materials in landfills while helping our customers save time and money!, • Our repair process needs minimal product usually just 1 to 2 tablespoons allowing our technicians to take everything they need with them in a small vehicle. Our method ensures a clean and smell-free experience, complete in less than two hours.VISION, • To establish and lead a nationally recognized market for surface repair as an alternative to replacement or complete refinishing., • Our goal is to be represented in every major metropolitan area, and for our brand to be synonymous with spot repair among all facilities and maintenance management.MISSION, • Our mission is to develop outstanding teams by investing in strong relationships., • Together, we work to solve our customers problems by reducing the waste of time, money, and materials that end up in landfills.VALUES, • Serve Others, • Put Relationships First, • No Jerks, • Be Humble, • Be a Problem Solver, • Be Curious, • Seek to Understand the Cause of the Problem, • Work Smart, • Constantly Improve, • Trust the Process, • Be Organized, • Be Teachable, • Put Business Needs Above Personal Wants

Job Description Are you looking for a new challenge and the opportunity to make a difference in the health and well-being of your community? We offer a long-term career opportunity in an essential service with competitive earnings and a fast-paced working environment. Enjoy the freedom to work in the field, help others, receive paid training, and access opportunities for advancement! People come to pest control from a wide variety of fields: route/delivery drivers, retail, customer service, construction, military veterans, lawncare, warehouse, uniform delivery, restaurants...the list goes on! The bottom line is, if you're a motivated, hard-working, compassionate person with a positive mindset, we can train you for a new career! What You'll Get... We want to help our employees build a great career and a great future. At Turner Pest Control, you'll have access to these great benefits! Health and Well-being: • Blue Cross Blue Shield medical PPO options, • Delta Dental and Vision, • Prescription drug program, • Flexible Spending Accounts (FSA) for medical and childcare expenses, • Competitive hourly compensation, • 401(k) Savings Plan, • Life insurance and short-term disability 100% company paid (with options to buy up), • Enjoy stable, year-round employment with opportunities for growth, • Paid training, • A take home company vehicle for field positions, • Paid time off and eight paid holidays, • Opportunities for advancement What You'll Do... As a Lawn Technician you'll spend your days outdoors helping customers keep their lawns healthy, green, and pest-free. You'll identify lawn and pest issues and apply treatments, monitor lawn conditions, and step in with recovery plans when lawns need extra care. Your role will include checking on customer properties, spotting issues early, and making sure each yard gets the attention it needs to thrive. You'll also build trust with customers by keeping them informed and following through on lawn recovery efforts. If you enjoy hands-on work, being outside, and making a visible difference, this could be a great fit for you! Who You Are... What does it take to be a successful Lawn Technician at Turner Pest Control? For starters, you'll be enthusiastic and dedicated with a keen eye for detail and love of customer service. You'll also have... • The ability to safely move about customer locations, ascend/descend stairs and ladders to service out of the way areas, and position yourself to conduct service under/around furniture, equipment, and tight spaces, • The ability to safely move items and equipment weighing up to 50 pounds, • The ability to work outdoors in all regular seasonal weather conditions, • The flexibility to assist in various service departments within the branch as needed, • Basic math skills to measure and mix product applications accurately, • The ability to operate a variety of hand tools and equipment safely, • The ability to wear personal protective equipment (PPE) which includes an OSHA compliant respirator in some cases, • Technical proficiency with computers, smart phones, etc., • Held a valid driver's license for at least 3 years with an acceptable driving record, • The ability to read, write, speak, and comprehend English, • Good oral and written communication, • Legal eligibility to work in the U.S., • Availability to work a flexible schedule (between the hours of 7:00 a.m. and 6:00 p.m.), • Availability to work some weekends, • High school degree or equivalent Who We Are... Turner Pest Control has protected homes and businesses across Florida for over 50 years with expert, eco-friendly pest management solutions. As one of the fastest-growing pest control companies in the state and ranked among the top 100 in the U.S., we take pride in combining innovative services with our strong family values. Our certified specialists provide comprehensive pest, termite, lawn, mosquito, and wildlife management, ensuring year-round protection with no long-term contracts. With flexible scheduling, no-obligation quotes, and a satisfaction guarantee, Turner Pest Control delivers personalized concierge care you can trust to keep our customer's property pest-free year-round. EOE/M/F/Vet/Disabled Turner Pest Control is a Drug-Free Workplace Job Posted by ApplicantPro

Job DescriptionBenefits: • Bonus based on performance, • Company car, • Company parties, • Free uniforms, • Opportunity for advancement, • Paid time off, • Training & development Do you enjoy making things using your hands? Have hobbies that involve color or 3-D art? Like finding ways to be creative in different areas? Becoming a Surface Experts Technician could pair your interests perfectly with your job! Take advantage of an artistic outlet as your work creatively to complete repairs, usually in an hour or less. A Day in the Life of a Surface Experts Technician: WE OFFER: • Base Salary + Bonus Opportunity: Performance-based commissions starting on day 1, • Great Work/Life Balance: No required overtime, no nights, no weekends, • Time Off: Paid holidays and accruable vacation, • Flexible Work Schedule: Can accommodate midweek appointments, • Paid New Hire Training: Onboarding includes learning alongside a trained technician, • Company Car: Each technician drives a branded company vehicle for job duties, • Tools Included: All necessary tools and products are provided, • Learn a New Trade: Develop skills in a brand-new emerging trade, • Supportive Work Environment: Team celebrates achievements and collaborates in their approach to problem-solving, • Small Business: Local business with an owner who works alongside the team each day, • Mentorship Opportunities: Ongoing repair training and career development, • Dedicated Help Lines: Technician Support Team on call to assist to questionsDUTIES: In the Field Daily • Complete 4 or more creative repairs on-site each day, • Perform work on-location while displaying good customer service and communication, • Problem-solve with repairs in a variety of settings like apartments, hotels, moving sites, construction sites, etc.Customer Service and Communication, • Treat tenants and staff with exceptional customer service, • Update progress on repairs by entering information and notes on our CRM/Dispatch tool, • Problem-solve alongside our designated Support Team for any issueFollow Repair Process, • Learn and integrate our one-of-a-kind 5-step process into your creative routine, • Master each instrument and tool in your personalized tool-kit, • Flex your artistic talents each repair requires a unique solutionCalling all artistic types! Technicians with backgrounds in painting, sculpting, whittling, drawing, and other visual arts of various mediums can excel at Surface Experts. Your talent with color is vital in matching colors and patterns for complex repairs. Every repair has a different design, sheen, and material, so creativity is a must. QUALIFICATIONS • Hands-on experience doing some form of manual work From construction and manufacturing, to painting or sculpting., • A background in facilities maintenance is helpful but not a deal breaker., • Must be able to see, distinguish, and replicate colors A familiarity with color and color matching is integral to our process.ABOUT SURFACE EXPERTS Surface Experts is a comprehensive hard surface repair company. We can fix minor damages to many surfaces including Bathtubs, Cabinets, Floors, Appliances, Countertops, Furniture, Elevator Panels you name it! • By combining traditional trades with our own original processes and products, we are able to provide long-lasting repairs that are pleasing to the eye. And all with a smile!, • Our competitors want to resurface everything even damage only a few inches wide! We can repair those small spots, resulting in happy customers who keep on calling us back. Our goal is happy customer who has saved money and time while avoiding adding another damaged surface to the landfill., • Our typical repair doesnt make a mess, doesnt leave a smell, and doesnt take more than 2 hours. Technicians usually need only a tablespoon or two of product, meaning they can carry everything with them in a small truck or car!VISION, • To establish and lead a nationally recognized market for surface repair as an alternative to replacement or complete refinishing., • Our goal is to be represented in every major metropolitan area, and for our brand to be synonymous with spot repair among all facilities and maintenance management.MISSION, • Our mission is to develop outstanding teams by investing in strong relationships., • Together, we work to solve our customers problems by reducing the waste of time, money, and materials that end up in landfills.VALUES, • Serve Others, • Put Relationships First, • No Jerks, • Be Humble, • Be a Problem Solver, • Be Curious, • Seek to Understand the Cause of the Problem, • Work Smart, • Constantly Improve, • Trust the Process, • Be Organized, • Be Teachable, • Put Business Needs Above Personal Wants

Job Description Overview CTG is seeking to fill a Workstation Technician opening for our client in Jacksonville, FL. Location: Jacksonville, FL Duration: 6 months Duties: • Collaborates with Workstation Support Services business units to ensure hardware and software orders are received, configured, scheduled, and installed., • Ensure equipment is labeled according to company specifications., • Researches, verifies, and documents device specifications according to purchase order and company standards., • Works in conjunction with service and business units to relocate equipment as requested by departments., • Works independently while providing on-site installation, customer service, and technical installation and/or repairs support per department or individual customer requests., • Serves as technical and equipment liaison in the field as needed to collaborate with other support services (e.g., Help Desk, Applications, Materials Management, etc.), • Assists with end user training as needed and is able to explain basic concepts and procedures such as hardware and software requirements, moves/adds/changes implications, scheduling and impacts on the customer of proposed break/fix options to a large and diverse customer base., • Maintain inventory of supplies and equipment necessary to complete installations or repair requests. Collaborate with other IT Infrastructure areas to manage parts inventory., • Evaluates and processes equipment according to IT Security policy and guidelines., • High School Diploma and 2 years professional customer service experience supporting PC, Macintosh, desktop computing hardware and peripheral equipment - skills must include knowledge of Operating Systems and configuration, hardware configuration and software installation., • OR Associates degree. CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact Krista Eckard at . Kindly forward this to any other interested parties. Thank you!

Job DescriptionDescription Our Help Desk Technicians are the best of the best. Each day we have the privilege of putting smiles on the faces of hundreds of clients. Help Desk Technicians help iVenture clients solve problems with PCs, Macs, desktop applications, anti-virus software, Windows servers, smartphones, printers and network gear. The right candidate will join a high energy, fast paced company and team of very dedicated individuals supporting the IT environments of over 190 local small and mid-sized businesses. Please note: we are not a recruiter or placement service. Position OverviewWhat you'll be doing as an IT Help Desk Technician: • Support Microsoft Windows desktop and server technologies, • Consult with clients and offer guidance on technology use and best-practices, • Responsible for providing detailed documentation regarding your tickets and providing follow-up with clients in a timely manner, • Communicate the need for escalation promptly if you are unable to resolve the issue, • Provide fast and friendly tech support to end-users, IT managers, and C-level executives, • Bachelor’s Degree, business related field preferred, or equivalent experience, • Minimum of 1 year experience working in a 50+ user Windows desktop/server environment, • Well-rounded Microsoft desktop technology experience and user support, • Experience supporting the following: expert with Windows, exposure to Windows server technology, active directory and common network protocols, • Motivation and drive to develop yourself personally and professionally, • Strong communication skills both verbal and written, • WFH Flexibility, • Focus on Work/Life Balance, • We match 4% on your 401K, • Paid Time Off Benefits - 3 weeks for your first year, 4 weeks on your second year, • Comprehensive benefits package which includes paid life insurance and paid long term disability, • Peerfit membership - providing free access to many local gyms and studios, • Paid Maternity, Paternity and foster leave, • Quarterly employee/family outings, • Career Path road mapping, • $200 spend in our iVenture Company Store on your anniversary year with us as well as upon joining our team, • Real Culture initiatives and recognition, not just pizza parties, • 360 degree feedback. You talk, we listen., • Mileage reimbursement, • Super cool technology – virtual lab, paid certifications and training days, • iVenture is rated by its employees as a "Great Place to Work" and has a strong culture and exceptional core valuesAdditional Information:, • Valid driver’s license and insurance with reliable transportation. This position requires infrequent local travel., • Smoking is prohibited at all client sites and iVenture offices

Job Description Employment Type: Full-time Location: Jacksonville, FL Division/Department: MRO/Avionics Available vacancies: One About Avmax: Avmax is a diverse company offering every product and service related to aviation. We have locations, operations, and deployment worldwide. Our vision at Avmax Group Inc. ("Avmax") is to simplify our customers' aviation needs through dependable, globally integrated services with trusted results. Established in 1976, our locations include: Calgary (HQ) and Vancouver in Canada, Great Falls and Jacksonville in the USA, Nairobi in Kenya, and N'Djamena in Chad. Avmax offers the following capabilities: Aircraft Leasing, Airline Operations, Avionics, Component Repairs, Engineering, MRO, Paint and Spares. Avmax's engineering division is a Transport Canada authorized Design Approval Organization (DAO). Avmax's maintenance division is a Transport Canada authorized Maintenance Repair Organization (MRO). Why work at Avmax? Avmax has a diverse workforce with opportunity for growth and career advancements. We offer competitive compensation and benefit packages, flexibility, work-life balance and a friendly working environment. We are proud of our work and commitment to create one of the leading workforce, products and services in the Aviation industry. Reporting Structure The Aircraft Avionics Technician reports directly to the Department Lead. Core Competencies • Accountability, • Attention to detail, • Problem-solving, • Effective communication, both verbal and written, • Confidentiality, • Excellent investigation and critical-thinking ability, • Judgement, • Professionalism, • Provide technical assistance or guidance to the crew., • Communicate when tasks are complete so next trade can move onto the job., • Ensure work environment is safe and clean., • Promote company values, vision and mission., • Demonstrated capability and competency in field of expertise., • Excellent oral and written communication skills., • Demonstrated ability to work well with other individuals throughout the organization., • Possesses strong fundamental aircraft knowledge., • Builds quality capability and responsiveness for Avmax Group Inc., • Carry out maintenance repairs on customer aircraft., • Possess excellent oral and written communication skills., • Minimum 3 years' experience in the field., • HR & IT Orientation (instructor-led), • Safety Orientation (instructor-led), • Occupational Health and Safety, • Safety Management System (SMS), • General Procedures Manual (GPM), • Maintenance Policy Manual (MPM), • Human Factors, • Respect in the Workplace Training, • Workplace Violence and Harassment Training, • Workplace Sensitivity Training, • A Guide to Workplace Incident Investigations, • Duty of Persons Directing Work (Bill C-45), • Management Development Program (instructor-led), • Occupational Health and Safety Awareness Training for Supervisors in All Jurisdictions, • Progressive Discipline, • Supervisor 101 - Avmax Internal Training (instructor-led) NOTE: Most training modules will be assigned as part of the onboarding program and must be completed within the first 3 months of employment. Please refer to your onboarding schedule for further details. Safety Training for Safety Committee Members - (Only Applicable to employees who will be part of the Safety Committee) • A Guide to Workplace Incident Investigations Elective programs and/or courses should meet at least one of the following criteria: • Alignment with core competencies / KPI's, as outlined in the current position profile;, • Development of one's skillset for career progression., • Elective courses can be aligned with a performance development plan. To find out more information please contact your Human Resources Department. All elective programs and/or courses are subject to prior approval by the authorizing Manager. Our recruitment commitments: • We thank all applicants for their interest; however, only those selected for an interview will be contacted., • Depending on qualifications, selected candidates may be offered a role at a more appropriate level., • Avmax Group offers a competitive compensation package including an optimal benefits plan and retirement plan., • Avmax Group Inc. is dedicated to and prides itself on being an EEO/AA We celebrate and welcome the diversity of all of our employees. Avmax Group Inc. has specific policies in place to prevent discrimination in our hiring practices on the basis of the protected groups., • Avmax is a drug free work environment and participates in pre-employment and random alcohol and/or drug screening. Job Posted by ApplicantPro

Job Description Type: Full Time Location: Mayport, FL Overtime Exempt: No Reports To: ARMADA HQ Security Clearance Required: Active Top Secret CONTINGENT UPON AWARD* Duties & Responsibilities: The Construction Surveillance Technician (CST) will adequately perform CST security services during the renovation of Building 2480 at Naval Station Mayport, FL. • CSTs shall assist the Government Security Construction Manager and Site Security Manager by performing or supporting the verification, testing, and acceptance of collateral equipment to ensure that the materials meet the mission requirement., • In addition to surveillance of materials, storage and movement activities, CST will communicate issues for resolution to the Site Security Manager and Government Security Construction Manager., • Construction Surveillance Technician (CST) will Coordinate receipt, inventory and storage of materials., • Coordinate with the government's Transportation Manager, the shipment of materials to support construction dates., • Construction Surveillance Technician (CST) will coordinate storage and expenditure of materials., • During material storage and facility construction the CST will coordinate inventory, inspections, testing and supervision of collateral materials to ensure that the materials meet requirements., • Construction Surveillance Technician (CST) will provide direct advice to field personnel accomplishing construction related activities and communicate issues for resolution to the Site Security Manager for action., • Attend meetings as required and communicate requirements or issues to the Site Security Manager., • CSTs must have completed the CST/CAG (Construction Security Technician/Cleared American Guard) course (or equivalent)., • CSTs must have completed an applicable TSCM (Technical Surveillance Counter Measures) course (or equivalent))., • Must be a US citizen with Top Secret security clearance, • Must be trained in Construction Surveillance Technician (CST) skills. The above information has been designed to indicate the general nature and level of work to be performed. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of the contractor assigned to this position. Applying: If you feel you have the knowledge, skills and abilities for this position visit our careers page at . Special Notes: Relocation is not available for these jobs. ARMADA provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. ARMADA complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Must be able to successfully pass a background check, and pre-employment drug testing. Job offers are contingent upon results of background check and drug testing.

Job Description About us: Cambridge Management, Inc. (CMI) began in 1987 as a small team managing a portfolio of communities in Tacoma, Washington. Our focus soon shifted to providing quality management for affordable housing communities. These affordable communities provide homes for those with limited incomes including families, senior citizens, and people with disabilities. Today, our team has grown to nearly 350 employees managing 120 communities and more than 9,000 apartment homes. Our portfolio includes market rate, Low Income Housing Tax Credit, and Project-Based Section-8 communities that range in size from 6 to 344 units. We currently manage communities in California, Florida, Hawaii, North Carolina, Oregon, Tennessee, Washington State, and Virginia. Why work for us: Cambridge Management, Inc. offers the following Compensation and Benefits package for full time employees: Position Salary Range: $24.00 - $26.00 Paid time off: • An accrual of 80 hours of Vacation., • Up to 6 paid sick days per year. (varies based on state sick leave laws), • 8 paid holidays, • Medical, Dental, Vision, Life Insurance, Long Term Disability, AD&D & EAP, • 401(k) with employer match Under direct supervision of the Director of Property Management, the Regional Manager, or the local Community Manager, the Maintenance Technician- Traveling is responsible for assisting in the preservation and upkeep of the properties. The Maintenance Technician- Traveling will be aware of and always operate within OSHA (Occupational Safety & Health Act) Standards and company safety policies and procedures. The Maintenance Technician- Traveling is responsible for assisting with the maintenance teams and assisting with the overall maintenance of the communities, including repairs, the make-ready process, and preventative maintenance. Requirements Essential Job Duties and Responsibilities: This job description does not list all duties that will be required of this position. You will be required to perform other duties, as requested by your supervisor. • Travel between properties as needed to assist local maintenance teams., • Work with the maintenance team and efficiently perform maintenance activities, such as make readies and service requests., • Monitor and prioritize service requests and tasks assigned to them; and then identify and expedite emergencies that should be top priority., • Partner with the maintenance team and community manager to complete the workload throughout the day to make sure that tasks are completed timely and efficiently., • Perform preventative maintenance on community and apartment appliances and equipment., • Manage the make ready process by walking vacant apartments after move-out to determine make ready needs, communicating with vendors and monitoring progress, ensuring that all repairs and replacements are completed, and notifying the Community Manager when the make ready process is complete., • Monitor repairs that are continuously repeated and work with the team to determine a cause and course of action., • Participate in completing service requests including repairing and replacing appliances, plumbing systems, and air conditioning, heating, and electrical systems, etc., • Accurately complete records in OneSite regarding service requests, preventative maintenance, and make-ready of vacant apartments., • Identify any issues regarding safety, hazardous conditions or maintenance needs in the community and correct them or report them to the Community Manager., • Assist Community Manager in recruiting and interviewing potential maintenance team members as needed, • Assist as needed in training, developing, and mentoring the community’s maintenance staff., • Periodically complete written property safety audits., • Responsible for maintaining adequate inventory of supplies for repairs., • Assist with grounds keeping, pool maintenance, housekeeping, distribution of notices, apartment inspections, and other tasks as needed., • May assist in new development or rehabilitation of a community (i.e., market surveys/strategies, provide property management insight/input to construction team or contractor, walk apartments, punch-out, etc.), • Maintain overall organization and cleanliness of work areas and maintenance shops, • Competency is based on education, training, skills, and experience. In order to perform the job successfully, an individual should demonstrate the following knowledge, skills and competencies:, • Must diagnose problems and make repairs in areas such as electrical, plumbing, exterior, and appliance., • Experience in tub replacement as well as countertop and other interior upgrade installation., • Ability to perform daily work orders as well as apartment unit turns in a timely manner., • Read, understand, and follow instructions contained in handwritten/printed service requests, provide handwritten/typed responses to same, and complete handwritten/typed reports in accordance with company procedures., • Responsible for ensuring the physical aspects of the community meet the company's established standards and any applicable laws. A successful candidate will be an excellent communicator, have patience with all the Community population, and is a team player., • Strong organizational and time-management skills., • Strong customer service., • Communicate effectively with co-workers, residents, and vendors, • Ability to maintain the physical condition of the community as well as complete maintenance requests for residents and unit turns., • Must be willing to work flexible hours including weekends for on-call or other duties as needed., • Must share 24-hour on call phone on a rotation basis., • Willingness to accept other tasks and responsibilities that may not be strictly related to repair and maintenance, • Handle tile work, carpentry repairs and all facets of the make ready process, • Computer skills and working knowledge of Office 365, • Basic: 10-Key, Alphanumeric Data Entry, Contact Management, Payroll Systems, Spreadsheet, Word Processing/Typing, • Must have excellent computer skills and have industry software experience. RealPage’s OneSite competency will be required following specific CMI training., • Requires bending or twisting daily, • Requires walking and standing for prolonged periods daily Requires kneeling, crouching, stooping, or crawling regularly, • Requires using hands to handle, control, or feel objects, tools, or controls, • Requires repetitive movements, • Position requires frequent / daily reaching, pushing, pulling, and lifting up to 25 pounds, regularly / weekly lifting up to 50 pounds and occasionally lifting up to 100 pounds with team lifting, • Requires constant contact with others (face-to-face, by telephone, or otherwise), • Requires face-to-face discussions with individuals or teams, • Requires use of electronic mail; Requires telephone conversations, • Requires dealing with unpleasant, angry, or discourteous people at times, • Requires working in cramped workspaces and getting into awkward positions, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures Includes exposure to sounds and noise levels that are distracting or uncomfortable, • Requires making decisions that affect other people, the financial resources, and/or the image and reputation of the organization, • Requires exposure to equipment and chemicals with use of proper PPE, • Pace and Scheduling: Requires meeting strict deadlines, • Requires coordinating or leading others in accomplishing work activities, • Requires work with external customers or the public Requires work with others in a group or team, • Job tasks are performed in close physical proximity to other people. Includes responsibility for the health and safety of others, • Requires wearing common protective or safety equipment, • Requires working indoors in non-controlled environmental conditions, • Requires working indoors in environmentally controlled conditions, • High school diploma or equivalent., • At least 2 years proven experience as a maintenance technician preferably in the field of residential community management., • Certified Apartment Maintenance Technician (CAMT) is preferred but not required., • EPA Type I, Type II or Universal and CPO certification strongly preferred., • Must be able to travel to and from supply stores, other communities, and other off-site locations without advance notice, as a requirement of this position. Must have a valid drivers license to perform these duties and drive a golf cart (if one is on site). Must be able to complete all required training within thirty (30) days of hire date. Must be able to work any shift Sunday-Saturday to support the company's business needs. This job description in no way states or implies that these are the only duties to be performed by the team member incumbent in this position. Further, this document does not create an employment contract implied or otherwise, other than an “at will” relationship. Additional Notes Offers contingent upon successful completion of background check, drug screen, and MVR check (if required by position)

Job Description Employment Type: Full-time - Open seven days a week two shifts operation Location: Jacksonville, FL Division/Department: MRO/Maintenance Available vacancies: Multiple About Avmax: Avmax is a diverse company offering every product and service related to aviation. We have locations, operations, and deployment worldwide. Our vision at Avmax Group Inc. ("Avmax") is to simplify our customers' aviation needs through dependable, globally integrated services with trusted results. Established in 1976, our locations include: Calgary (HQ) and Vancouver in Canada, Great Falls and Jacksonville in the USA, Nairobi in Kenya, and N'Djamena in Chad. Avmax offers the following capabilities: Aircraft Leasing, Airline Operations, Avionics, Component Repairs, Engineering, MRO, Paint and Spares. Avmax's engineering division is a Transport Canada authorized Design Approval Organization (DAO). Avmax's maintenance division is a Transport Canada authorized Maintenance Repair Organization (MRO). Why work at Avmax? Avmax has a diverse workforce with opportunity for growth and career advancements. We offer competitive compensation and benefit packages, flexibility, work-life balance and a friendly working environment. We are proud of our work and commitment to create one of the leading workforce, products and services in the Aviation industry. Reporting Structure The Airframe and Powerplant Technician reports directly to the Department Lead. Core Competencies • Accountability, • Attention to detail, • Problem-solving, • Effective communication, both verbal and written, • Confidentiality, • Excellent investigation and critical-thinking ability, • Judgement, • Professionalism, • Provide technical assistance or guidance to the crew., • Communicate when tasks are complete so next trade can move onto the job., • Ensure work environment is safe and clean., • Promote company values, vision and mission., • Demonstrated capability and competency in field of expertise., • Excellent oral and written communication skills., • Demonstrated ability to work well with other individuals throughout the organization., • Possesses strong fundamental aircraft knowledge., • Builds quality capability and responsiveness for Avmax Group Inc., • Carry out maintenance repairs on customer aircraft., • Requires active or pending Airframe and Powerplant Certification., • Possess excellent oral and written communication skills., • HR & IT Orientation (instructor-led), • Safety Orientation (instructor-led), • Occupational Health and Safety, • Safety Management System (SMS), • General Procedures Manual (GPM), • Maintenance Policy Manual (MPM), • Human Factors, • Respect in the Workplace Training, • Workplace Violence and Harassment Training, • Workplace Sensitivity Training, • A Guide to Workplace Incident Investigations, • Duty of Persons Directing Work (Bill C-45), • Management Development Program (instructor-led), • Occupational Health and Safety Awareness Training for Supervisors in All Jurisdictions, • Progressive Discipline, • Supervisor 101 - Avmax Internal Training (instructor-led) NOTE: Most training modules will be assigned as part of the onboarding program and must be completed within the first 3 months of employment. Please refer to your onboarding schedule for further details. Safety Training for Safety Committee Members - (Only Applicable to employees who will be part of the Safety Committee) • A Guide to Workplace Incident Investigations Elective programs and/or courses should meet at least one of the following criteria: • Alignment with core competencies / KPI's, as outlined in the current position profile;, • Development of one's skillset for career progression. Our recruitment commitments: • We thank all applicants for their interest; however, only those selected for an interview will be contacted., • Depending on qualifications, selected candidates may be offered a role at a more appropriate level., • Avmax Group offers a competitive compensation package including an optimal benefits plan and retirement plan., • Avmax Group Inc. is dedicated to and prides itself on being an EEO/AA We celebrate and welcome the diversity of all of our employees. Avmax Group Inc. has specific policies in place to prevent discrimination in our hiring practices on the basis of the protected groups., • Avmax is a drug free work environment and participates in pre-employment and random alcohol and/or drug screening. Job Posted by ApplicantPro

Job Description MISTRAS Group, Inc. is seeking a State Carded Level II RT (Radiographer) in Jacksonville, FL. Must be local MAJOR RESPONSIBILITIES/ACTIVITIES: • Set up and calibrate equipment., • Conduct tests with appropriate NDT technique(s)., • Interpret, evaluate and document results., • Must be thoroughly familiar with the scope and limitations of the method in which certified and capable of directing the work of trainees and Level I personnel., • Must be familiar with the codes, standards and other contractual documents that control the method as utilized by the employer., • Work with minimal supervision., • Identify and resolve problems in a timely manner., • Obtain and analyze information skillfully., • High School graduate or equivalent required., • Graduate of a specialized NDT technical program meeting SNT-TC1A for one or all of the following is required: UT, RT, MT or PT., • Prior certification as an NDE Level II with one (1) year experience or prior certification as an NDE Level I technician with adequate field experience hours to certify to Level II per SNT-TC1A standards on all or one (1) of the following is required; UT, RT, MT or PT., • Industrial Radiographers Certification Card preferred. (Required for all hired as a Radiographer)., • High School Diploma/GED/Degree, • Proof of classroom hours/Training in NDT This job description reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. WORKING CONDITIONS: • Field duties require outdoor work in a plant atmosphere., • Interaction with other crew employees, as well as supervisors and clients., • Working in plant and/or shop areas around production machinery with extreme noise levels., • Must be physically fit and able to carry 50 lbs. frequently for Radiography work., • Must be able to wear safety equipment as required by the safety department for personal protection., • May be at more than one jobsite in a day and must be able to tolerate climate changes., • May be required to travel out of town on a periodic basis. #LI-SS1 MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions, including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing, I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island and is therefore covered by the state’s workers’ compensation law. Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job Description Are you an experienced Marine Technician looking for a new and exciting challenge? Are you seen as the "Go To" when your coworkers, family, or friends have questions regarding anything marine? Have you ever thought about training the next generation of Technician. Jones Technical Institute might have an amazing opportunity for you to become a Technical Instructor. Never taught? No problem! If you have the drive, patience, and skills we'll train you! Why not take the next step to make that happen for the next generation of technicians. Nothing is more rewarding than seeing the student you taught succeed, knowing you were the one that made it happen! Position Overview: As a Technical Instructor, you'll play a pivotal role in shaping the minds and skills of our students. Your expertise in gasoline and diesel engines, diagnostics, and repair will be the guiding light that leads them to a promising career in many different industries. We believe that hands-on learning is the key to success, so get ready to dive into the world of interactive teaching and inspire the next generation to conquer the challenges of modern marine technology. What We Offer: • $27 - $29 per hour base salary, • Night Compensation incentives, • Weekends OFF, • Paid Training, • Discounted Tuition for you AND your Immediate Family, • Medical/Dental/Vision/Life Ins/STD & LTD Ins, • 401K with employer sponsored matching, • Minimum of 11 Paid Holidays, • Robust Paid Time Off Schedule Responsibilities: • Inspire and Educate: Create an engaging and inclusive learning environment where students can flourish, fostering their passion for welding while imparting your expert knowledge., • Hands-On Training: Lead by example and provide practical demonstrations, ensuring students gain real-world experience., • Curriculum Development: Collaborate with our education team to enhance existing courses and develop new ones that align with industry trends and advancements., • Mentorship: Guide and mentor students on their individual projects, encouraging them to think critically and find innovative solutions., • Education: High school diploma or GED, • Experience: 3 years of practical work experience in the field, • Communication Skills: Strong communication and interpersonal skills, enabling you to effectively connect with students and fellow staff Compass Rose Foundation (CRF) is an 80-year-old Florida chartered non-profit organization that fulfills its mission by governing post secondary institutions. Steeped in the management of career-oriented institutions, its current charge is the development of trade and technical schools. Under this endeavor, CRF has one institution within its auspice of control. Jones Technical Institute (J-Tech), located in Jacksonville offers programs in Automotive, Diesel, Marine & RV Technology as well as HVAC-R and Commercial Truck Driving, Welding and soon to be Network Administration and Security. J-Tech, founded in 2013, is located on the south side of Jacksonville. Our campus is comprised of 28 acres and 168,000 square feet. Since its founding, our Automotive and Diesel programs have produced over 1500 graduates while its Commercial Truck Driving program has assisted almost thousands of graduates obtain a Class A Commercial Driver’s License. We encourage you to review each of the following websites to learn more about who we are: • www. compassrosefoundation.org Job Types: Full-time, Part-time, Adjunct Contract We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionAbout us: Cambridge Management, Inc. (CMI) began in 1987 as a small team managing a portfolio of communities in Tacoma, Washington. Our focus soon shifted to providing quality management for affordable housing communities. These affordable communities provide homes for those with limited incomes including families, senior citizens, and people with disabilities. Today, our team has grown to nearly 350 employees managing 120 communities and more than 9,000 apartment homes. Our portfolio includes market rate, Low Income Housing Tax Credit, and Project-Based Section-8 communities that range in size from 6 to 344 units. We currently manage communities in California, Florida, Hawaii, North Carolina, Oregon, Tennessee, Washington State, and Virginia. Why work for us: Cambridge Management, Inc. offers the following Compensation and Benefits package for full time employees: Position Salary Range: $28.00 - $30.00 Paid time off: • An accrual of 80 hours of Vacation., • Up to 6 paid sick days per year. (varies based on state sick leave laws), • 8 paid holidays, • Medical, Dental, Vision, Life Insurance, Long Term Disability, AD&D & EAP, • 401(k) with employer match This job description does not list all duties that will be required of this position. You will be required to perform other duties, as requested by your supervisor. • Supervise the maintenance team and efficiently schedule maintenance activities, such as make readies and service requests., • Monitor and prioritize service request and tasks; identify and expedite emergencies that should be top priority., • Communicate assignments to the maintenance team and monitor the workload throughout the day to make sure that tasks are completed timely and efficiently., • Coordinate, schedule, and perform preventative maintenance on community and apartment appliances and equipment., • Manage the make ready process by walking vacant apartments after move-out to determine make ready needs, communicating with vendors and monitoring progress, ensuring that all repairs and replacements are completed, and notifying the Community Manager when the make ready process is complete., • Monitor repairs that are continuously repeated and work with the team to determine a cause and course of action., • Participate in completing service requests including repairing and replacing appliances, plumbing systems, and air conditioning, heating, and electrical systems, etc., • Accurately complete records in OneSite regarding service requests, preventative maintenance, and make-ready of vacant apartments., • Identify any issues regarding safety, hazardous conditions or maintenance needs in the community and correct them or report them to the Community Manager., • Provide input to Community Manager regarding employee performance evaluations, employee compliments from residents, corrective counseling needs, etc., • Assist Community Manager in recruiting and interviewing potential maintenance team members., • Train, develop, and mentor the community’s maintenance staff., • Periodically complete written property safety audits., • Responsible for maintaining adequate inventory of supplies for repairs., • Monitor monthly maintenance budget and provide input to Community Manager for determining annual budgets., • Assist with ground keeping, pool maintenance, housekeeping, distribution of notices, apartment inspections, and other tasks as needed., • May oversee new development or rehabilitation of a community (i.e., market surveys/strategies, provide property management insight/input to construction team or contractor, walk apartments, punch-out, etc.), • Maintain overall organization and cleanliness of work areas and maintenance shops. Competency is based on education, training, skills, and experience. In order to perform the job successfully, an individual should demonstrate the following knowledge, skills, and competencies: • Must diagnose problems and make repairs in areas such as electrical, plumbing, exterior, and appliance., • Experience in tub replacement as well as countertop and other interior upgrade installation., • Ability to perform daily work orders as well as apartment unit turns in a timely manner., • Read, understand, and follow instructions contained in handwritten/printed service requests, provide handwritten/typed responses to same, and complete handwritten/typed reports in accordance with company procedures., • Responsible for ensuring the physical aspects of the community meet the company's established standards and any applicable laws. A successful candidate will be an excellent communicator, have patience with all the Community population, and is a team player., • Strong organizational and time-management skills., • Strong customer service., • Communicate effectively with co-workers, residents, and vendors., • Ability to maintain the physical condition of the community as well as complete maintenance requests for residents and unit turns., • Must be willing to work flexible hours including weekends for on-call or other duties as needed., • Must share 24-hour on call phone on a rotation basis., • Willingness to accept other tasks and responsibilities that may not be strictly related to repair and maintenance., • Handle tile work, carpentry repairs and all facets of the make ready process., • Computer skills and working knowledge of Office 365, • Basic: 10-Key, Alphanumeric Data Entry, Contact Management, Payroll Systems, Spreadsheet, Word Processing/Typing, • Must have excellent computer skills and have industry software experience. RealPage’s OneSite competency will be required following specific CMI training., • Requires bending or twisting? Daily, requires walking and standing for prolonged periods daily; Requires kneeling, crouching, stooping, or crawling? Regularly, • Requires using hands to handle, control, or feel objects, tools, or controls; Requires repetitive movements., • Position requires frequent / daily reaching, pushing, pulling, and lifting up to 25 pounds, regularly / weekly lifting up to 50 pounds and occasionally lifting up to 100 pounds with team lifting., • Requires constant contact with others (face-to-face, by telephone, or otherwise) Requires face-to-face discussions with individuals or teams; Requires use of electronic mail; Requires telephone conversations., • Requires dealing with unpleasant, angry, or discourteous people at times., • Requires working in cramped workspaces and getting into awkward positions; Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures; Includes exposure to sounds and noise levels that are distracting or uncomfortable., • Requires making decisions that affect other people, the financial resources, and/or the image and reputation of the organization., • Requires exposure to equipment and chemicals with use of proper PPE., • Pace and Scheduling: Requires meeting strict deadlines., • Requires coordinating or leading others in accomplishing work activities Requires work with external customers or the public Requires work with others in a group or team; Job tasks are performed in close physical proximity to other people? Requires, • Includes responsibility for the health and safety of others., • Requires wearing common protective or safety equipment., • High school diploma or equivalent., • At least 2 years’ proven experience as a maintenance supervisor, preferably in the field of residential community management., • Certified Apartment Maintenance Technician (CAMT) is preferred but not required., • EPA Type I, Type II or Universal and CPO certification strongly preferred. Must be able to travel to and from supply stores, other communities, and other off-site locations without advance notice, as a requirement of this position. Must have a valid drivers license to perform these duties and drive a golf cart (if one is on site). Must be able to complete all required training within thirty (30) days of hire date. Must be able to work any shift Sunday-Saturday to support the company's business needs. This job description in no way states or implies that these are the only duties to be performed by the team member incumbent in this position. Further, this document does not create an employment contract implied or otherwise, other than an “at will” relationship. Additional Notes Offers contingent upon successful completion of background check, drug screen, and MVR check (if required by position)

Job Description P&C Technician 1, 2, or 3 Powerserve Technologies is currently seeking Protection and Control (P&C) Technicians. These opportunities require that you travel to the job sites to perform the necessary work at Substations across Florida. Responsibilities of Position *Protection & Control Tech 1: · Attendance, dependability, reliability and perseverance are critical to our success. • Fluency in English language comprehension communication skills and understanding technical terminology are necessary. Continued self-improvement of those skills is a must., • Cooperation and teamwork are essential since we all work as part of one team., • Initiative to further one’s knowledge and perform tasks is necessary to keep up with changing technologies., • Quality in workmanship, of character and personality is essential in our employees as our reputation is built on it., • Good judgement is important. We stress doing what’s right over what’s easy., • Adaptability is a key attribute since tasks, work sites and necessary skill sets can change rapidly., • Creativity and curiosity are traits needed to continue to learn and understand the equipment, process and methods., • Organizational and time management skills are required to be productive because of the attention to detail required., • Teach applicable skills and knowledge to more junior technicians., • Demonstrate advanced proficiency in AC and DC circuit theory, electronics, transformers, 3 phase systems, Boolean Algebra, etc. Assist more junior technicians with learning., • Demonstrate thorough understanding of the theory of operation of basic relays and protection systems, devices, instrumentation transformers, SCADA, etc. Learn theory of operation of more advanced relays, protection systems, etc. Assist more junior technicians with learning this information., • Demonstrate proficiency with drawing symbiology, ANSI/IEEE relay function numbers and how different manufactures accomplish the functions. Assist more junior technicians with learning the symbols and function numbers., • Demonstrate logical problem-solving abilities., • Continue to learn, understand and demonstrate advanced testing methodologies and proper use of multimeters, test equipment and testing devices. Assist more junior technicians with learning testing methods, test equipment uses and theory and testing devices., • Draw schematic/elementary diagrams from verbal descriptions. Assist more junior engineers with understanding descriptions and how to translate into drawings., • Demonstrate understanding and use of good Human Performance Tools and techniques in testing and record keeping techniques. Provide guidance and explanation to more junior technicians., • Demonstrate ability to read utility and other technical drawings. Assist more junior technicians to develop this skill., • Demonstrate the ability to identify the physical location, equipment and orientation shown on the drawings. Assist more junior technicians in locating the physical equipment from drawings., • Demonstrate familiarity with hand and power tools and their usages. Monitor more junior technicians for proper tool selection and use; provide instruction as needed., • Complete assigned paperwork, test forms and procedures in a timely manner. Understand the reasoning behind the forms. Explain the documents and forms to more junior technicians as needed., • Assemble control panels from drawings., • Develop leadership and responsibility., • Follow all Human Performance, Safety and Environmental rules and use all procedures, processes and tools available. Take proactive steps to keep everyone safe. Stop anyone not following the rules., • Proficiency in identifying all substation equipment and explaining the function of it. Assist more junior technicians with identification and function of this equipment., • Be an example to others. Let your actions be a model for other teammates. *Protection & Control Tech 2 • Attendance, dependability, reliability and perseverance are critical to our success., • Fluency in English language comprehension communication skills and understanding technical terminology are necessary. Continued self-improvement of those skills is a must., • Cooperation and teamwork are essential since we all work as part of one team., • Initiative to further one’s knowledge and perform tasks is necessary to keep up with changing technologies., • Quality in workmanship, of character and personality is essential in our employees as our reputation is built on it., • Good judgement is important. We stress doing what’s right over what’s easy., • Adaptability is a key attribute since tasks, work sites and necessary skill sets can change rapidly., • Creativity and curiosity are traits needed to continue to learn and understand the equipment, process and methods., • Organizational and time management skills are required to be productive because of the attention to detail required., • Demonstrate proficiency in AC and DC circuit theory, electronics, transformers, 3 phase systems, Boolean Algebra, etc., • Demonstrate understanding of the theory of operation of basic relays and protection systems, devices, instrumentation transformers, SCADA, etc. Learn theory of operation of more advanced relays, protection systems, etc., • Demonstrate familiarity with drawing symbiology, ANSI/IEEE relay function numbers and how different manufactures accomplish the functions., • Demonstrate logical problem-solving abilities., • Continue to learn, understand and demonstrate advanced testing methodologies and proper use of multimeters, test equipment and testing devices., • Demonstrate the ability to draw schematic/elementary diagrams from verbal descriptions., • Demonstrate understanding and use of good Human Performance Tools along with testing and record keeping techniques., • Demonstrate ability to read and understand utility and other technical drawings., • Demonstrate the ability to identify the physical location, equipment and orientation shown on the drawings., • Demonstrate familiarity with hand and power tools and their usages., • Complete assigned paperwork, test forms and procedures in a timely manner. Understand the reasoning behind the forms., • Assemble control panels from drawings., • Develop leadership and responsibility., • Follow all Human Performance, Safety and Environmental rules and use all procedures, processes and tools available. Take proactive steps to keep everyone safe., • Proficiency in identifying most substation equipment and explain the it., • Be an example to others. Let your actions be a model for other teammates. *Protection & Control Tech 3 • Attendance, dependability, reliability and perseverance are critical to our success., • Fluency in English language comprehension communication skills and understanding technical terminology are necessary. Continued self-improvement of those skills is a must., • Cooperation and teamwork are essential since we all work as part of one team., • Initiative to further one’s knowledge and perform tasks is necessary to keep up with changing technologies., • Quality in workmanship, of character and personality is essential in our employees as our reputation is built on it., • Good judgement is important. We stress doing what’s right over what’s easy., • Adaptability is a key attribute since tasks, work sites and necessary skill sets can change rapidly., • Creativity and curiosity are traits needed to continue to learn and understand the equipment, process and methods., • Organizational and time management skills are required to be productive because of the attention to detail required., • Demonstrate basic understanding of AC and DC circuit theory, electronics, transformers, 3 phase systems, Boolean Algebra, etc., • Learn the theory of operation of relays from different manufactures and protective systems, devices, instrumentation transformers, SCADA, etc. Teach theory to more junior technicians., • Learn drawing symbiology, ANSI/IEEE relay function numbers and how different manufactures accomplish the functions., • Demonstrate logical problem-solving abilities., • Learn, understand and demonstrate advanced testing methodologies and proper use of multimeters, test equipment and testing devices., • Learn to draw schematic/elementary diagrams from verbal descriptions., • Learn, understand and use good Human Performance Tools along with testing and record keeping techniques., • Learn to read and understand utility and other technical drawings., • Learn how to identify the physical location, equipment and orientation shown on the drawings., • Demonstrate familiarity with hand and power tools and their usages., • Learn how to complete assigned paperwork, test forms and procedures in a timely manner. Learn to understand the reasoning behind the forms., • Learn how to assemble control panels from drawings., • Begin developing leadership and responsibility., • Learn and follow all Human Performance, Safety and Environmental rules and use all procedures, processes and tools available. Take proactive steps to keep everyone safe., • Learn to identify all substation equipment and explain the function it., • Be an example to others. Let your actions be a model for other teammates. Qualifications: P&C Tech 1: Required: Associate of Science in applied field (electronics, power systems, information). Associates of Arts with pre-electrical engineering electives. Competent in the understanding and application of Algebra and Trigonometry as it pertains to electrical theory and testing calculations. Proficiency with calculations of 3 phase, transformer, circuit analysis, etc. parameters. Proficiency in setting and testing overcurrent microprocessor-based relays. One (1) year of field experience in controls or control panel wiring. Preferred: Familiarity with ANSI/NETA testing requirements and procedures. Three (3) years of field experience in protection and control systems. P&C Tech 2: Required (Basic): Associate of Science in applied field (electronics, power systems, information). Associates of Arts with pre-electrical engineering electives. Competent in the understanding and application of Algebra and Trigonometry as it pertains to electrical theory and testing calculations. Proficiency with calculations of 3 phase, transformer, circuit analysis, etc. parameters. Proficiency in setting and testing overcurrent microprocessor-based relays. One (1) year of field experience in controls or control panel wiring. Preferred: Familiarity with ANSI/NETA testing requirements and procedures. Two (2) years of field experience in protection and control systems. P&C Tech 3: Required Qualifications: High school diploma with experience wiring control panels or similar products. Competent in the understanding and application of Algebra and Trigonometry as it pertains to electrical theory and testing calculations. Familiarity with 3 phase and Introductory experience with setting and testing overcurrent microprocessor-based relays. Experience in field control or control panel wiring. Preferred: Associate of Science in applied field (electronics, power systems, information). Associates of Arts with pre-electrical engineering electives. One (1) year documentable experience in control panel wiring and protection and control systems. Skills and Characteristics: Self-Motivated, detail and goal oriented. Dependability and punctuality. Mechanical aptitude. Studious and motivated to learn. Proficient in hand and power tool use. Attentive to detail. Time organization. Leadership.

Job DescriptionWildlife Exclusion Technician (Physical / Skilled Trade / Career Track) Jacksonville, FL Coastal Wildlife & Pest Services This is not a typical pest control job. If you want easy work, air conditioning, or to “give it a try and see,” stop reading now. This role is for someone who wants a real, hands-on trade, takes pride in hard work, and is looking for a long-term career with advancement, not a temporary paycheck. The Reality of This Job (Read This Carefully) You will: • Climb roofs in the Florida summer heat, • Work in attics and crawl spaces, • Carry materials, tools, and equipment, • Use ladders daily, • Perform detailed exclusion and light construction work, • Get dirty, sweaty, and tired — and still do quality work This job is physically demanding. It is uncomfortable at times. And it is not for everyone. But for the right person, it is incredibly rewarding. Who This Job Is For This role is a great fit if you: • Enjoy working with your hands and solving real problems, • Like seeing clear results from your work at the end of the day, • Take pride in doing difficult work the right way, • Want to build a career, not bounce between jobs, • Are dependable, coachable, and mentally tough, • Prefer working in the field rather than behind a desk You do not need prior wildlife experience. You do need the right attitude, work ethic, and physical capability. We can teach skills. We cannot teach grit. What You’ll Be Doing As a Wildlife Exclusion Technician, you’ll focus on permanent solutions, not quick fixes. Your responsibilities include: • Inspecting homes and businesses for wildlife activity and structural entry points, • Performing professional wildlife exclusion work (roof returns, soffits, vents, crawl spaces, attics, etc.), • Using hand and power tools to seal and fortify structures, • Setting and removing wildlife traps as needed, • Educating homeowners on what was done and how to prevent future issues, • Following a structured daily schedule prepared by our office, • Communicating job updates clearly through our systems, • Participating in a rotating on-call schedule (typically one weekend per month) Most days you’ll work independently, but you’re never on an island — our team supports you. Physical & Practical Requirements (Non-Negotiable) To be successful in this role, you must: • Be comfortable working on roofs, ladders, in attics, and crawl spaces, • Be able to lift and carry 50+ lbs repeatedly, • Work safely in heat, humidity, and confined spaces, • Have a valid driver’s license and clean driving record, • Follow safety procedures and company standards consistently, • Communicate professionally with customers and teammates If any of the above is a dealbreaker, this is not the right role — and that’s okay. Pay, Benefits & Growth We take care of people who take care of the job. What we offer: • Competitive pay based on experience and performance, • Company vehicle, cell phone, and most tools provided, • Health insurance reimbursement up to $200/month after 6 months, • Paid holidays and vacation time, • Performance incentives and bonuses (including 5-star review bonuses), • Extra income opportunities through emergency calls and weekend pickups, • Ongoing paid training and skill development, • Clear advancement paths into Senior Technician, Lead Technician, and Leadership roles, • Quarterly team outings and events This company is growing. People who perform well and want more responsibility move up. About Coastal Wildlife & Pest Services We’re a family-owned company serving the Jacksonville area since 2022, and we’re growing fast because we do things differently. We: • Do the job right, not fast-and-sloppy, • Treat customers with respect, • Invest in our people, • Build long-term careers, not burnout factories If you want a trade you can be proud of, real advancement, and a team that has your back — this could be the opportunity you’ve been looking for. Learn more at:

Job Description Are you an experienced Automotive or Diesel technician looking for a new and exciting challenge? Are you seen as the "Go To" when your coworkers, family, or friends have questions regarding anything marine? Have you ever thought about training the next generation of Technician. Jones Technical Institute might have an amazing opportunity for you to become a Technical Instructor. Never taught? No problem! If you have the drive, patience, and skills we'll train you! Why not take the next step to make that happen for the next generation of technicians. Nothing is more rewarding than seeing the student you taught succeed, knowing you were the one that made it happen! Position Overview: As a Technical Instructor, you'll play a pivotal role in shaping the minds and skills of our students. Your expertise in gasoline and diesel engines, diagnostics, and repair will be the guiding light that leads them to a promising career in many different industries. We believe that hands-on learning is the key to success, so get ready to dive into the world of interactive teaching and inspire the next generation to conquer the challenges of modern marine technology. What We Offer: • $27 - $29 per hour base salary, • Night Compensation incentives, • Weekends OFF, • Paid Training, • Discounted Tuition for you AND your Immediate Family, • Medical/Dental/Vision/Life Ins/STD & LTD Ins, • 401K with employer sponsored matching, • Minimum of 11 Paid Holidays, • Robust Paid Time Off Schedule Responsibilities: • Inspire and Educate: Create an engaging and inclusive learning environment where students can flourish, fostering their passion for welding while imparting your expert knowledge., • Hands-On Training: Lead by example and provide practical demonstrations, ensuring students gain real-world experience., • Curriculum Development: Collaborate with our education team to enhance existing courses and develop new ones that align with industry trends and advancements., • Mentorship: Guide and mentor students on their individual projects, encouraging them to think critically and find innovative solutions., • Education: High school diploma or GED, • Experience: 3 years of practical work experience in the field, • Communication Skills: Strong communication and interpersonal skills, enabling you to effectively connect with students and fellow staff Compass Rose Foundation (CRF) is an 80-year-old Florida chartered non-profit organization that fulfills its mission by governing post secondary institutions. Steeped in the management of career-oriented institutions, its current charge is the development of trade and technical schools. Under this endeavor, CRF has one institution within its auspice of control. Jones Technical Institute (J-Tech), located in Jacksonville offers programs in Automotive, Diesel, Marine & RV Technology as well as HVAC-R and Commercial Truck Driving, Welding and soon to be Network Administration and Security. J-Tech, founded in 2013, is located on the south side of Jacksonville. Our campus is comprised of 28 acres and 168,000 square feet. Since its founding, our Automotive and Diesel programs have produced over 1500 graduates while its Commercial Truck Driving program has assisted almost thousands of graduates obtain a Class A Commercial Driver’s License. We encourage you to review each of the following websites to learn more about who we are: • www. compassrosefoundation.org Retired Automotive and/or Diesel Technicians that wish to develop the next generation of technicians ARE ENCOURAGED TO APPLY. Job Types: Full-time, Part-time, Temporary, Adjunct Contract

Job Description Fiber Optic Test Technician (National Travel) Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Fiber Optic Test Technician will have experience installing equipment in a variety of environments including: Central Office, Data Center, and Optical Transport equipment. The ideal candidate will have will have fiber optic testing and troubleshooting experience. The candidate will be responsible for all of the field-testing process under the direction of an installation supervisor. The candidate will be responsible for providing continuous updates to the management team about milestones, site arrival, work completion, site departure, and any delays/obstacles that are jobsite related. The candidate will also provide timely progress updates on the overall project, and relay any pertinent information to the customer/installation supervisor, via project management software. The candidate must be willing to travel nationwide. Duties and Responsibilities: ● To perform all Fiber Optic Tests: ○ Optical Time Domain Reflectometry (OTDR) ○ Optical Return Loss ○ Optical Power Loss ● Maintain tools assigned to the job as well as monitor tool calibration requirements. ● Preparation and submission of daily reports to the installation supervisor. ● Assigning specific tasks to lower level installers assigned to his/her team, and monitoring their work for efficiency, quality, and safety. ● Work with supervisor for scheduling. ● Responsible for the accuracy in the test results by verifying data from opposite end before leaving the site. ● Coordinate timing and procedures of doing testing within the customer’s maintenance window (with Installation supervisor), if applicable. ● Responsible for the accuracy of all the test parameters required by the customer. ● Completes quality assurance on all reports to check the data for errors and inconsistencies. ● Responsible for overall safety, quality, and efficiencies of the crew. ● Interfaces with customer representatives while on site. ● Provides technical support for customer contacts and Technicians on request. ● Implement and integrate the node-to-node by OTDR trace, power trace, resolving OSP issues, and high reflecting issue. ● BER Testing over all deployment to build the 100G circuit on new system to ensure proper testing of entire system. ● Should have experience in photonics, power audits and signal flow. ● Perform hardware testing, such as power verification, device provisioning and system tests. ● Perform inventory of all job-related materials. ● Ensure project deadlines, timely service and quality standards are met. ● Produce test reports and analysis documents. ● Maintain on-site job records and administration tracking. ● Apply logical troubleshooting procedures to network services including logical fault isolation on network equip, carrier circuitry, CPE, customer wiring, and customer hardware and software applications to customer satisfaction. ● Become proficient with internal project management software as it applies to tracking all aspects of order flow. ● Work closely with the Engineering and Project Managers to ensure customer satisfaction. ● Meet or exceed customer and internal documented acceptable levels of quality. ● Performs other related duties as assigned by management. ● Nationwide travel up to 100%. Credentials and Experience: ● Requires experience in Data Center/PoP/CO/Optical transport installation/test & turn-up experience. ● Must have in-depth knowledge of testing and cleaning optical fibers. Knowledge, Skills, and Abilities: ● Proficient in the use of Fiber Optic test equipment from various manufacturers – EXFO, VIAVI, and others. ● Efficient use of any and all fiber cleaning kits. ● Possess a good mechanical aptitude. ● The ability to adapt to various work environments. ● Knowledge of optical routing equipment installations. ● Knowledge of fiber optic cable installation & testing practices. ● Knowledge of AC/DC power. ● Proficiency in Word, Excel, PowerPoint, and the Internet; must be adept at learning different computer programs and business systems. ● Must have clean driving and criminal records and successfully pass a drug test. ● Knowledge of test equipment, tools and materials used in construction, installation, troubleshooting, maintenance and repair of telecommunications systems and equipment. Special Requirements: ● Due to the nature of our Customer’s requirements work schedules and hours of operation are dynamic. The Lead Installer must be able to adjust to varying work schedules. ● Will be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. ● The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. ● While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel and talk or hear. The employee is frequently required to reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl. ● The employee must occasionally lift and/or move up to 75 pounds. ● Specific vision abilities required by this job include close vision (clear vision at 20 inches or less), distance vision, color vision, peripheral vision, depth perception and ability to adjust focus as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. ● The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. Work Environment: ● The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals Travel Required: 100% The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company DescriptionCBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades.\r\n\r\nOur Mission\r\nCBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises.\r\n\r\nCBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry.\r\n\r\nWe are always looking for passionate, driven and talented individuals to join every facet of our team.

Job Description Overview Join a Leader in Home Healthcare At Rotech Healthcare Inc., we’re more than a medical equipment provider—we’re a trusted partner in patient care. As a national leader in ventilators, oxygen therapy, sleep apnea treatment, wound care, diabetic solutions, and other home medical equipment, we empower patients to manage their health from the comfort of home. With hundreds of locations across 45 states, our team delivers high-quality products, exceptional service, and compassionate support that helps patients live more comfortably, independently, and actively. Whether you're a clinician, technician, or healthcare administrator, your work at Rotech directly improves lives. Explore more about our mission and services at Rotech.com. Responsibilities Respiratory Therapist or RN – Home Healthcare Deliver Care Where It Matters Most – In the Patient’s Home Rotech Healthcare Inc. is seeking a compassionate and clinically skilled Respiratory Therapist (RRT) or Registered Nurse (RN) to join our team. If you’re looking for a meaningful role that allows you to build relationships, provide hands-on care, and make a lasting impact in patients’ lives—all outside of a traditional clinical setting—this is the opportunity for you. In this role, you’ll provide in-home respiratory therapy and clinical support to patients using ventilators, oxygen therapy, and other advanced equipment. You’ll be part of a team that values autonomy, patient education, and personalized care. Essential Job Duties and Responsibilities (Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.) • Conduct in-home patient assessments and provide clinical education on respiratory equipment., • Adjust ventilator settings based on patient needs and physician orders., • Monitor and troubleshoot advanced respiratory equipment to ensure optimal function., • Maintain accurate documentation of services and patient interactions., • Provide ongoing phone support and follow-up care for respiratory patients., • Participate in on-call rotations and drive a vehicle for home visits (as needed)., • Support training and orientation of new clinical staff.Why Join Rotech?, • Deliver care in a flexible, patient-centered environment., • Be part of a mission-driven team improving lives through home-based therapy. Qualifications Employment is contingent on • Background check (company-wide). Results will not be used automatically to disqualify individuals. Instead, the Company will conduct an individualized assessment that considers the duties of the position, the nature and timing of the offense, and any evidence of rehabilitation, in accordance with applicable laws., • Drug screen (when applicable for the position), • Compliance with healthcare facility credentialing process (when applicable for the position), • High school diploma or GED equivalent, required, • Active licensure in your primary state of residence as a Respiratory Therapist (RRT or CRT) or other acceptable medical credential (e.g., RC, RN, LPN, LPV) based on state licensure laws, • Willingness to obtain licensure in neighboring states if required by service areaPreferred Education and/or Experience, • Completion of an accredited program in respiratory care, nursing, or a related paramedical field, • Experience in home respiratory care or home healthcare, • Degree in respiratory therapy or a related science, • At least one year of relevant clinical experience, • Familiarity with medical terminologySkills & Competencies, • Strong attention to detail and ability to multi-task effectively, • Excellent verbal and written communication skills in English, • Ability to interpret and respond to various forms of communication (verbal, written, visual), • Maintain confidentiality and handle sensitive information with discretion, • Demonstrated problem-solving, time management, and organizational skills, • Capable of working independently and collaboratively within a teamTechnical Proficiency, • Proficient in Microsoft Office (Outlook, Word, Excel), • Comfortable with email communication, internet research, and using office equipment (fax, copier, printer, phone, computer/tablet)Physical Requirements, • Ability to lift and transport patient equipment (minimum 65 lbs), • Regular contact with patients and equipment may involve exposure to contagious pathogens, • Must be able to sit, stand, walk, talk, and listen for extended periods, • Requires close vision for reading small print on screens and paperwork, • Must comply with Rotech’s Respiratory Protection & N95 Mask Fit Testing Policy, including:, • Medical evaluation and fit testing, • Annual recertification, • Maintaining a clean-shaven face for proper mask seal per OSHA guidelines

Job DescriptionDescription MISTRAS Group, Inc. is seeking Level II Radiographers for work in Jacksonville, FL. JOB DETAILS: Location: Cape Canaveral, FL. (Aerospace preferred, but not required) Hours: 60-70 hours per week Tube Experience is a must since we will be utilizing all of Blue Origins equipment. Applicants must be able to provide the following Documents: • High School Diploma/GED/Degree, • Proof of classroom hours/Training in NDT MAJOR RESPONSIBILITIES/ACTIVITIES: • Set up and calibrate equipment., • Conduct tests with appropriate NDT technique(s)., • Interpret, evaluate and document results., • Must be thoroughly familiar with the scope and limitations of the method in which certified and capable of directing the work of trainees and Level I personnel., • Must be familiar with the codes, standards and other contractual documents that control the method as utilized by the employer., • Work with minimal supervision., • Identify and resolve problems in a timely manner., • Obtain and analyze information skillfully., • High School graduate or equivalent required., • Graduate of a specialized NDT technical program meeting SNT-TC1A for one or all of the following is required: UT, RT, MT or PT., • Prior certification as an NDE Level II with one (1) year experience or prior certification as an NDE Level I technician with adequate field experience hours to certify to Level II per SNT-TC1A standards on all or one (1) of the following is required; UT, RT, MT or PT., • Industrial Radiographers Certification Card preferred. (Required for all hired as a Radiographer)., • Completion of a forty (40) hour Radiation Safety Course preferred. (Required for all hired as a Radiographer)., • To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position;, • Problem Solving ~ Identify and resolve problems in a timely manner. Obtain and analyze information skillfully., • Oral Communication ~ Speak clearly and persuasively in positive or negative situations., • Written Communication ~ Edit and present numerical data effectively., • Interpersonal Skills ~ maintain confidentiality., • Planning / Organization ~ Prioritize and plan work activities using time efficiently., • Adaptability ~ Ability to adapt to changes in the work environment. Manage competing demands and able to deal with frequent change, delays and/or unexpected events., • Dependability ~ consistently at work on time, follows instructions, respond to management direction and solicit feedback to improve performance., • Quality ~ demonstrates accuracy, thoroughness and monitor own work to ensure quality., • Field duties require outdoor work in a plant atmosphere., • Interaction with other crew employees, as well as supervisors and clients., • Working in plant and/or shop areas around production machinery with extreme noise levels., • Must be physically fit and able to carry 50 lbs frequently for Radiography work., • Must be able to wear safety equipment as required by the safety department for personal protection., • May be at more than one jobsite in a day and must be able to tolerate climate changes., • Ability to frequently lift and carry 50 pounds., • Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively., • Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to conduct investigations., • Sufficient manual dexterity with or without reasonable accommodations, which permits the employee to perform routine office duties., • Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations., • Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells. #LI-SS1 This job description reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job Description Lickety Split Air, Plumbing & Electric is Northeast Florida's fastest-growing home services company. We were built on a simple promise: show up fast, do it right, and treat every customer like royalty. We cover HVAC, plumbing, and electrical services across the Jacksonville metro and surrounding areas. We are growing fast. We are not slowing down. And we are looking for the person who will help us build the machine that sustains it. The Opportunity This is not a job for someone who wants to maintain the status quo. This is a role for someone who wants to build a high-performance operational engine that drives one of Northeast Florida's most ambitious home services companies. As Director of Operations, you will own the day-to-day and long-term infrastructure of our business. You will sit at the intersection of people, process, and performance. You will be accountable for results that matter — technician productivity, dispatch efficiency, customer satisfaction scores, revenue per job, and team development. You will hold real authority over how this company operates. If you have been looking for the kind of role where your decisions actually move the needle, where your track record actually earns you more responsibility, and where the ceiling is determined by your performance rather than someone else's comfort level — this is that role. What You'll Do Build and Scale Operations · Continuously refine operational systems, SOPs, and workflows · Own the operational playbook — from dispatch and scheduling to fleet management to parts procurement · Identify bottlenecks, inefficiencies, and gaps before they become problems; drive solutions with speed and precision · Lead the expansion of service capacity as the company grows into new markets and service areas Lead and Develop the Team · Directly oversee field operations, dispatch, and service coordination teams · Recruit, train, and retain top-performing technicians and operational staff · Build a culture of accountability, urgency, and excellence from the ground up · Hold regular performance reviews and implement structured coaching for all direct reports Drive Performance and Results · Establish, monitor, and report on KPIs across every operational function · Own P&L accountability for operational costs — labor, fleet, materials, overhead · Work closely with ownership on revenue targets, capacity planning, and growth projections · Implement performance-based incentive structures that align team behavior with business goals Champion the Customer Experience · Ensure that Lickety Split's customer experience standard — fast, friendly, first-class — is embedded into every operational touchpoint · Partner with the customer care team to drive resolution speed and satisfaction scores · Use customer feedback data to identify and address systemic service delivery issues Strategic Execution · Translate ownership's vision into executable quarterly and annual operating plans · Manage vendor and supplier relationships to ensure parts availability, cost control, and quality · Oversee fleet maintenance scheduling and vehicle inventory · Evaluate and implement technology tools What You Bring Experience · Minimum 5 years of senior operations management experience with progressive responsibility · Background in a fast-paced, service-based industry — we are open to candidates from car dealerships (especially service/fixed operations), logistics and distribution, fleet management, multi-location retail, construction, pest control, or similar environments · Proven track record of building and scaling teams in high-volume, time-sensitive operations · Experience managing 20+ employees across multiple functions; experience with technician/field workforce a plus · Demonstrated success implementing operational systems and standard operating procedures that improved productivity and customer satisfaction · P&L exposure and financial literacy — you can read a job costing report and know what to do with it Leadership · You lead from the front. You are visible, decisive, and direct. · You hold people accountable without destroying morale · You develop talent intentionally — you build the bench, not just the starting lineup · You communicate with clarity up, down, and across the organization Mindset · You are a builder. You see disorganization as opportunity, not obstacle. · You are competitive. You track performance, set targets, and push the team to beat them. · You are structured. You believe in systems, documentation, and repeatable processes. · You are a problem-solver who makes decisions with available information and adjusts as you learn more. · You thrive in an environment that is moving fast and expects the same from you. Not a Fit If: · You need extensive corporate process to get a decision made · You are used to slow-paced environment with no accountability · You are not a curious, natural problem solver Why You'll Love It Here Impact from Day One You will not spend six months observing. You will have ownership, authority, and real work from week one. Your fingerprints will be on how this company operates for years. Direct Access to Leadership You will get context, resources, and trust — and be expected to deliver. Room to Build Your Career As the company grows, so does this role. The Director of Operations who builds our infrastructure today becomes the VP of Operations, the COO, or the partner in tomorrow's expansion. We promote from within and reward the people who help us get to the next level. A Culture Worth Showing Up For We hire for character, train for skill, and hold ourselves to a standard of excellence. We use personality and culture assessments to ensure every person on the team genuinely belongs here. You will work with people who take their craft seriously and enjoy the work. Competitive Compensation Competitive compensation package including base salary plus performance bonuses tied to operational and company-level results. Benefits package, paid time off, and additional details provided during the interview process. The base pay for this role is $250k per year plus bonuses. Lickety Split is an Equal Opportunity Employer #INDP2

Job Description Are you an experienced Automotive or Diesel technician looking for a new and exciting challenge? Are you seen as the "Go To" when your coworkers, family, or friends have questions regarding anything marine? Have you ever thought about training the next generation of Technician. Jones Technical Institute might have an amazing opportunity for you to become a Technical Instructor. Never taught? No problem! If you have the drive, patience, and skills we'll train you! Why not take the next step to make that happen for the next generation of technicians. Nothing is more rewarding than seeing the student you taught succeed, knowing you were the one that made it happen! Position Overview: As a Technical Instructor, you'll play a pivotal role in shaping the minds and skills of our students. Your expertise in gasoline and diesel engines, diagnostics, and repair will be the guiding light that leads them to a promising career in many different industries. We believe that hands-on learning is the key to success, so get ready to dive into the world of interactive teaching and inspire the next generation to conquer the challenges of modern marine technology. What We Offer: • $27 - $29 per hour base salary, • Night Compensation incentives, • Weekends OFF, • Paid Training, • Discounted Tuition for you AND your Immediate Family, • Medical/Dental/Vision/Life Ins/STD & LTD Ins, • 401K with employer sponsored matching, • Minimum of 11 Paid Holidays, • Robust Paid Time Off Schedule Responsibilities: • Inspire and Educate: Create an engaging and inclusive learning environment where students can flourish, fostering their passion for welding while imparting your expert knowledge., • Hands-On Training: Lead by example and provide practical demonstrations, ensuring students gain real-world experience., • Curriculum Development: Collaborate with our education team to enhance existing courses and develop new ones that align with industry trends and advancements., • Mentorship: Guide and mentor students on their individual projects, encouraging them to think critically and find innovative solutions., • Education: High school diploma or GED, • Experience: 3 years of practical work experience in the field, • Communication Skills: Strong communication and interpersonal skills, enabling you to effectively connect with students and fellow staff Compass Rose Foundation (CRF) is an 80-year-old Florida chartered non-profit organization that fulfills its mission by governing post secondary institutions. Steeped in the management of career-oriented institutions, its current charge is the development of trade and technical schools. Under this endeavor, CRF has one institution within its auspice of control. Jones Technical Institute (J-Tech), located in Jacksonville offers programs in Automotive, Diesel, Marine & RV Technology as well as HVAC-R and Commercial Truck Driving, Welding and soon to be Network Administration and Security. J-Tech, founded in 2013, is located on the south side of Jacksonville. Our campus is comprised of 28 acres and 168,000 square feet. Since its founding, our Automotive and Diesel programs have produced over 1500 graduates while its Commercial Truck Driving program has assisted almost thousands of graduates obtain a Class A Commercial Driver’s License. We encourage you to review each of the following websites to learn more about who we are: • www. compassrosefoundation.org Job Types: Full-time, Part-time, Temporary, Contract We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description BB&E is a full-service civil and environmental engineering and consulting firm, headquartered in Northville, Michigan, which services both the Federal and Industrial sectors throughout the United States. BB&E team members provide Environmental Consulting, Facilities Engineering and Program/Project Management Services to Federal and private sectors. Position Summary BB&E is currently looking for a Construction Surveillance Engineering Technician to support the NAVFAC Southeast (SE) Headquarters, Public Works Departments (PWD) and Resident Officer in Charge of Construction (ROICC). This position is at Naval Station Mayport in Jacksonville, FL. Job Duties & Responsibilities • Provide overall coordination of the construction quality management program for assigned projects, • In conjunction with the Construction Manager (CM), review and provide recommendations toward approval of contractor quality control plan, • Attend selective quality control (QC), preparatory and initial meetings, and monitor three-phase checklists for accuracy and thoroughness, • Provide relevant remarks on Government Quality Assurance (QA) reports (or in identified section of Contractor's QC reports), particularly on critical, definable features of work included, • Take/file/distribute progress photos, • Validate quantity, condition, and approval of materials on site prior to Government issuing invoice payments, • Coordinate support to review and witness successful testing and commissioning/certification of critical systems (i.e., mechanical - HVAC/TABS/DALTS/DDC, electrical -pad mounted transformers/high-voltage systems/switchgear/automatic transfer switches/frequency converters, fire and life safety/fire protection systems, roofing systems, and underwater structures)., • Assure quality workmanship in accordance with specifications and industry standards on concrete/masonry/stucco/ building, envelope/structural steel/bolting/welding, and other building materials/structural systems, as required, • Attend/witness selected tests and review all applicable test reports and results It is expected that the minimum professional experience requirements have been met, as listed below: Experience & Education • A minimum of 5 years of verified experience as a Quality Control Manager working for General Contractors on NAVFAC or US Army Corps of Engineers (USACE) projects OR 10 years of verified foreman experience in one or more of following trades: Concrete; Mechanical; Electrical; Masonry; or Carpentry on commercial/industrial/military projects; residential experience does not qualify, • Must complete the USACE Construction CQM Certification Physical Requirements: To successfully perform the essential duties of this position, an individual must be able to perform the following: • Must be able to stand, walk, bend, stoop, crouch, crawl, navigate across uneven ground that is common at construction sites and climb for extended periods as well as when traveling to and from job sites, • Must be able to lift, carry, push, and pull materials and equipment weighing up to 50 pounds regularly, • Must be able to work both indoor/outdoor (with exposure to the elements), • Must be able to work in confined spaces and under varying environmental conditions, including heat, cold, humidity, rain, wind, dust, and noise, • Must be able to wear and use required personal protective equipment (PPE) such as hard hats, safety glasses, gloves, hearing protection, steel-toed boots, fall protection safety vests and high-visibility reflective safety vests, • Must have sufficient visual and auditory acuity to perform tasks safely and effectively, including reading instruments, recognizing hazards, and communicating on active construction sites, • Primarily operates in an outdoor environment where various weather conditions could be encountered, depending on the location and season., • May encounter extreme temperatures, airborne particles, fumes, chemicals, or loud noise., • Worksites might contain high-voltage equipment, exposed wires, and other electrical hazards that will require strict adherence to safety protocols. LIMITATIONS AND DISCLAIMER: The above job description is meant to describe the general nature and level of work being performed; it is not intended as an exhaustive list of all duties, responsibilities and required skills for the position. Employees will be required to follow any other job-related instructions and to perform other duties requested by their supervisor in compliance with Federal and State Laws. Required are representative of minimum levels of knowledge, skills and/or abilities necessary to perform each duty proficiently. Continued employment remains on an "at-will" basis. Benefits • Participation in the Employee Stock Ownership Plan – BB&E is 100% employee-owned!, • Discretionary bonus, • *Medical, Dental, and Vision Insurance with health care concierge, • *Employer provided Short-Term & Long-Term disability, • *Employer-provided Life insurance, • *Employee options for supplemental life, supplemental accident, critical illness, hospital indemnity, and Identity theft protection benefits, • *Generous PTO plus 11 paid holidays, • Traditional & Roth 401(k) options with fully vested employer match, • Tuition reimbursement & professional development, • Employee referral program, • Employee discounts, • Employee Assistance Program (EAP) *BB&E is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.

Job Description MASTEC IS HIRING! Are you known for your friendly attitude and customer-focused approach? At MasTec Advanced Technologies, you’ll go beyond just installing state-of-the-art home technologies, like satellite dishes, home security systems, and smart home automation. You’ll be the trusted expert for our customers, ensuring everything runs smoothly and meets their needs. What You'll Do: • Install cutting-edge home technology (Satellite Systems) while building lasting relationships with customers., • Guide customers in choosing the best solutions, ensuring they enjoy their new products from day one., • Your skills will make a real impact, and no prior experience is needed! What We're Looking For: • A passion for customer service and safety., • A desire to learn and master the latest tech., • Someone who enjoys a mix of independence, outdoor work, and in-home installations., • The ability to recommend the best products for each customer’s needs. What We Offer: • Competitive pay with performance-based incentives (the more you do, the more you earn!)., • Paid training at $15/hour, covering safety, customer service, technology, products, and sales techniques., • Top-quality tools provided to help you succeed., • A company van you can take home, plus a gas card., • A clear path to promotion, with opportunities to advance to Field Technician Supervisor or Site Manager. Requirements: • Ability to lift 60-80 lbs and climb ladders up to 36 feet., • A valid driver's license., • Ability to pass all pre-employment screenings., • Flexible availability, including weekends or evenings., • Ready to start by 4/27/2026., • Willingness to travel to Jacksonville, FL for training. Why MasTec? You'll be joining a team that partners with top brands like Verizon, DirecTV, Viasat, Charter and Spectrum. Your work will directly impact our customers, and you’ll have the tools and support to excel and grow in your career. Ready to explore your next opportunity? Apply today and discover what’s possible with MasTec Advanced Technologies! Company DescriptionAbout MasTec Advanced Technologies MasTec Advanced Technologies is the leader in last mile fulfillment services for the deployment and installation of technology and devices. We safely deliver, install and support an array of consumer and commercial products, creating a high-quality customer experience in every interaction. We are the “clean boot, white glove” service provider, with more than 2,000 full-time service professionals and technicians nationwide. We connect people with the products and technology they want and need from TV, entertainment and security to connected homes, facility upgrades and smart cities. We provide the planning, staffing, training, resource deployment, inventory management, call center support and analytics required for a comprehensive workforce solution. Our controls deliver the depth, flexibility, technology and efficiency needed to meet any business objective. With over 25 years of expertise and one of the largest fleets of service vehicles in the country, you can be confident in us to deliver success for your business. MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, gender, sex, sexual orientation, gender identity, color, religion, national origin, age, disability, genetic information, veteran status or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions.About MasTec Advanced Technologies\r\nMasTec Advanced Technologies is the leader in last mile fulfillment services for the deployment and installation of technology and devices. We safely deliver, install and support an array of consumer and commercial products, creating a high-quality customer experience in every interaction. We are the “clean boot, white glove” service provider, with more than 2,000 full-time service professionals and technicians nationwide. We connect people with the products and technology they want and need from TV, entertainment and security to connected homes, facility upgrades and smart cities. We provide the planning, staffing, training, resource deployment, inventory management, call center support and analytics required for a comprehensive workforce solution. Our controls deliver the depth, flexibility, technology and efficiency needed to meet any business objective. With over 25 years of expertise and one of the largest fleets of service vehicles in the country, you can be confident in us to deliver success for your business.\r\n \r\nMasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, gender, sex, sexual orientation, gender identity, color, religion, national origin, age, disability, genetic information, veteran status or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions.

Job Description GENERAL JOB DESCRIPTION The Senior Technician is a heavy equipment mechanic that specializes in the modernization and repairing of cranes. This position may perform routine maintenance, troubleshooting, repairs and upgrades; as well as solving complex problems when the crane malfunctions. This position must encompass self-sufficiency, leadership abilities, effective communication and professionalism in an effort to lead field technicians and be the liaison between HCSG management and customers. The Technician position works in a safety-first type of environment. HCSG is a 24/7 service company that requires technicians to be available on-call and provide after hour or even weekend services as required due to customer needs. DUTIES & RESPONSIBILITIES • Must be able to be on-call and provide after hour services as required., • Troubleshooting, repairing, inspecting, and upgrading industrial hoists and cranes in the field at customer locations., • Train and mentor field technicians, • Perform OSHA required hoist and crane inspections and generating inspection reports and repair orders., • Communicate with the Service Manager and Branch Manager during the day so that work can be scheduled and completed on a daily basis., • Consult with customers regarding all repair and safety related issues and discuss recommendations that will assist the customer with improving their services., • Maintain all company issued equipment, vehicle, and assets in a safe and proper working order., • Operate tools, equipment, and vehicles in a safe and responsible manner. Notify immediate supervisor of any deficiencies., • Maintain supply of HCSG forms and miscellaneous materials in the company vehicle., • Maintain the ability to work with others in team environment., • Attend company provided trainings and seminars as required., • Participate in HCSG 5 Marks program The work is labor intensive. Must be able to lift up to 50lbs on a daily basis. Must be able to lift up to 100lbs on a rare basis. This position requires 90% of frequent climbing, balancing, stooping/crouching, overhead reaching, bending, squatting and prolonged standing and sitting. It requires occasional pushing, pulling, kneeling, and crawling. The position also involves great hand and eye coordination. Heights exceedingly over 50 feet from time to time are normal to incur on a daily basis to maintain a crane. Employee will be required to travel from time to time (20-50%) and must be willing to work various shifts to accommodate needs of HCSG branches and customers. This includes on-call and overtime. Travel out of town may be required at the discretion of the company. WORK ENVIRONMENT Work is normally performed inside or outside (pending customer requirements) with varying degrees of extreme hot and cold temperatures depending on the weather. During summer months, temperatures can exceed 120 degrees. This position will be frequently exposed to noise, heights, fumes, dust, and odors. MINIMUM QUALIFICATIONS • At least 5-7 years of crane repair & maintenance experience, • At least 3-4 of years electrical and/or mechanical experience in lieu of crane repair & maintenance experience., • Must have a valid drivers license and acceptable driving record, • Must always commit to working and driving safely, • Must be willing to work off the ground at various heights, • Must have basic computer skills to work with web-based crane inspection programs, • Must be able to communicate well with others and work independently or as a team, • Knowledge of hand tools and/or possess hand tools PREFERRED QUALIFICATIONS • Vocational/Technical training certificate Must be able to pass a pre-employment drug test and background (DISA) and submit to random and annual drug testing as required.

Job Description MISTRAS Group is seeking a Fulltime ET Tube Level II Technician to perform the following requirements. Responsibilities * Perform Eddy Current (ET) testing on heat exchanger and condenser tubing in accordance with ASME, ASTM, and client specifications. * Set up, calibrate, and operate ET equipment, including probe selection and instrumentation verification. * Interpret ET signals to identify, size, and characterize defects such as pitting, wall loss, cracking, and fretting. * Document inspection results accurately, prepare field reports, and communicate findings to clients and project supervisors. * Ensure compliance with written procedures, quality requirements, and safety standards during all inspection activities. * Assist with development and refinement of ET procedures and techniques under Level III guidance. * Perform equipment maintenance and troubleshooting to ensure reliable inspection performance. * Support outage and shutdown inspections, working efficiently under time-sensitive conditions. Requirements : * Current Eddy Current Testing (ET) Level II certification in accordance with ASNT SNT-TC-1A, CP-189, or employer-based written practice. * Documented ET classroom training hours and on-the-job experience meeting Level II requirements. * Proven experience performing ET tube inspections on heat exchangers, condensers, boilers, or similar tubular assets. * Ability to set up, calibrate, and operate ET instrumentation and probes. * Demonstrated competency in signal interpretation, defect characterization, and reporting. * Working knowledge of applicable codes, standards, and client specifications (ASME, ASTM, API, etc.). * Ability to accurately complete inspection reports, data logs, and electronic documentation. * Strong understanding of QA/QC requirements and adherence to written procedures. * Ability to work in industrial environments, including confined spaces, elevated areas, and varying weather conditions. * Willingness to work outages, shutdowns, nights, weekends, and travel as required. * Ability to lift and carry inspection equipment (typically up to 50 lbs). * Visual acuity and manual dexterity required for ET inspection activities. * Experience with multi-frequency and array ET techniques. * Prior work in power generation, refinery, petrochemical, or utility environments. * Additional NDT certifications (MT, PT, UT, RT) are a plus. * Strong client communication and teamwork skills. #LI-SS1 MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job Description The Construction Surveillance Engineer Technician (CSET) provides on-site construction oversight, quality assurance, and technical support for projects managed by the Naval Facilities Engineering Systems Command (NAVFAC). The CSET ensures that all construction activities comply with contract specifications, drawings, applicable codes, and safety standards. This role serves as the government’s on-site technical representative, monitoring contractor performance, verifying work progress, and documenting daily construction activities. The CSET reviews design plans, submittals, and construction schedules; inspects workmanship and materials; and assists in identifying and resolving technical issues in coordination with NAVFAC engineers and project managers. The position requires sound judgment, knowledge of construction practices, and familiarity with Department of Defense (DoD) and NAVFAC policies and procedures. Bristol Alliance of Companies (Bristol) is committed to building lasting relationships that reflect our hard work, ingenuity, and dedication to safety. Every employee has an impact on our success, which benefits the Native Culture, land, and people of the Bristol Bay region. Our values: People, Communities, Reputation, Teamwork, Trust, and Truth. Essential Functions • Coordinate Requests from Construction Contractor. Coordinate request from the construction Contractor for outage requests, excavation permits, burn permits, haul routes and other similar items. This will require liaison with the FEAD/ROICC and appropriate base personnel (Security, Public Works, Fire Department etc.) The CSET shall track status of the various requests and anything pending after five calendar days shall be investigated and a report made to the FEAD/ROICC detailing the cause for delays in issuance. This service shall be provided continuously as required during the construction period., • Coordinate field activities. CSET shall work with the construction contractor, Navy client customers, activity managers, maintenance and utility servers, Federal Fire departments, and Security Police so there is a seamless coordination of construction activities., • Attend Safety Meetings, Contractor Quality Control (CQC) Meetings, Partnering Meetings, and other conferences and meetings as needed. Develop Quality Assurance Plans in collaboration with FEAD/ROICC and other personnel. * Prepare Construction Representative’s Reports (CRRs). • Monitor construction work for project CQC compliance with contract documents., • Report instances of non-compliance with safety requirements., • Monitor compliance with environmental protection requirements., • Review Daily Contractor Quality Control (CQC) and Contractor Production Reports., • Monitor the updating of Submittal Register. Maintain Working Files., • Technical Review of Submittals., • Construction Photographic Services., • Knowledge of construction scheduling methods and familiarity with the use of scheduling software, including but not limited to Primavera Suretrak/P3/P6 and Microsoft Project., • Proficiency in computer software programs such as Microsoft Word, Excel, PowerPoint, and Outlook; Adobe Acrobat Professional; and RS Means/Cost Works., • Average agility and dexterity, CSE will be required to perform duties that involve moderate walking over rough, uneven or slippery surfaces, recurring bending, crouching, stopping, stretching, climbing ladders, walking up and down several flights of stairs or similar activities, recurring lifting of moderately heavy objects less than 50 lbs., such as testing or measuring equipment, and regular visits to construction sites., • Ability to communicate effectively, concisely and authoritatively in English bot orally and in writing. Experience in preparing correspondence, written reports, and in briefing management personnel., • Experience in developing and maintaining complex, long term, multi-year program construction management activities including submittal and Request for Information (RFI) processing., • Experience and familiarity with Federal building design criteria and construction guide specifications., • Knowledge of construction practices and techniques, e.g., proper applications of construction materials and methods of installation., • Ability to accurately calculate construction costs for changes, price the value of needed work and provide recommendations for equitable adjustments., • Ability to monitor he preparation of as-built activities of contractors to ensure that those documents are being prepared on an on-going basis. Ability to review contractor submissions of as-built drawings for completeness and accuracy and advice in writing the appropriate Government personnel as to the acceptability of such submissions., • High school diploma or GED is required., • A minimum of five (5) years of experience as a Quality Control Manager or Superintendent working for a General Contractor on NAVFAC or USACE projects, OR a minimum of ten (10) years of experience working as a Foreman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete on commercial/industrial/military projects valued in excess of $5 million. Residential experience does not qualify., • A minimum of five (5) years of experience working as a Journeyman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete., • Specialized training for Construction Quality Verification or completed an equivalent course., • Competent computer skills for network data entry., • Proficiency in using computer software programs such as Microsoft Word, Excel, and Outlook, as well as Adobe Acrobat Professional., • Average agility and dexterity. CSET will be required to perform duties that involve moderate walking over rough, uneven or slippery surfaces, recurring bending, crouching, stooping, stretching, climbing ladders, walking up and down several flights of stairs or similar activities, recurring lifting of moderately heavy objects less than 50 lbs. such as testing or measuring equipment, and regular visits to construction sites., • Ability to communicate in English effectively orally and in writing., • Experience in maintaining official construction site records., • Experience in conducting meetings to resolve problems on construction projects and briefing clients and management personnel., • In depth knowledge of construction practices and workmanship, including experience in proper uses of construction materials and installation methods., • In depth experience interpreting construction drawings and specifications on construction projects., • Experience in making materials take-offs for construction work., • Ability and experience in the inspection of materials, workmanship and construction and installation of various systems within the inspector’s area of expertise., • Knowledge of safety practices in the construction industry, including a background of familiarity with USACE (EM-385-1-1) and OSHA safety requirements., • Completed 30 Hour OSHA Construction Training within the past 2 years., • Must hold a certificate in USACE Construction Quality Management (CQM) for Contractors Training (maintain valid 5-year certificate) or obtain certification within 60 days of onboarding The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Position may be subject to both inside and outside environmental conditions, noise sufficient to cause the worker to shout., • Position may be subject to a variety of physical conditions – proximity to moving mechanical parts, moving vehicles, electric current, working on scaffolding and high places, exposure to high heat or exposure to chemicals., • Position may be subject to atmospheric conditions – fumes, odors, dusts, mist, gases, or poor ventilation. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Mobility: must be able to stoop, kneel, reach, walk, lift, grasp, feel, talk, hear, and perform repetitive motions., • Hearing: must be able to hear audible safety alarms., • Visual Acuity: must be adequate to perform above listed tasks in a safe manner and perform activities such as viewing a computer terminal and extensive reading. Excellent salary and benefits package to include paid time off, paid holidays, comprehensive health plan including medical, dental, vision, life, short-term disability insurance, and 401(k) plan with employer match. Equal Opportunity Employer Statement Bristol companies are equal opportunity employers and offer any available positions to all, without regard to race, color, religion, sex, national origin, age, disability, veteran status, parenthood, pregnancy, marital status, or changes in marital status, in accordance with applicable state and federal laws. This applies to recruitment, placement, pay, benefits, training, employment status changes, social and recreational programs, and other conditions and benefits of employment. Bristol grants employment preference first to BBNC and Choggiung shareholders, their spouses, or descendants, and second to Alaska Native Corporation shareholders in accordance with P.L. 93-638. Disclaimer This job description is not intended to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice. This job description is not a contract or employment. It does not promise or guarantee any particular benefit or specific action. All employment with Bristol is “at-will” which means that Bristol or employee can terminate the employment relationship at any time with or without cause.

Job Description MISTRAS Group, Inc. is seeking Full time NDT Level II MT/PT/UTT Techs for our Jacksonville, FL. lab. Must be local Applicants must be able to provide the following Documents: • High School Diploma/GED/Degree, • Proof of classroom hours/Training in NDT, • Set up and calibrate equipment, • Conduct tests with appropriate NDT technique(s)., • Interpret, evaluate and document, • Must be thoroughly familiar with the scope and limitations of the method in which certified and capable of directing the work of trainees and Level I, • Must be familiar with the codes, standards and other contractual documents that control the method as utilized by the, • Work with minimal, • Identify and resolve problems in a timely, • Obtain and analyze information, • High School graduate or equivalent, • Graduate of a specialized NDT technical program meeting SNT-TC1A for the following is required: MT/PT/UTT, • Prior certification as an NDE Level II with one (1) year experience or prior certification as an NDE Level I technician with adequate field experience hours to certify to Level II per SNT-TC1A, • To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position;, • Problem Solving ~ Identify and resolve problems in a timely manner. Obtain and analyze information, • Oral Communication ~ Speak clearly and persuasively in positive or negative, • Written Communication ~ Edit and present numerical data, • Interpersonal Skills ~ maintain confidentiality., • Planning / Organization ~ Prioritize and plan work activities using time, • Adaptability ~ Ability to adapt to changes in the work environment. Manage competing demands and able to deal with frequent change, delays and/or unexpected, • Dependability ~ consistently at work on time, follows instructions, respond to management direction and solicit feedback to improve, • Quality ~ demonstrates accuracy, thoroughness and monitor own work to ensure, • Safety ~ actively promotes safety procedures; use all equipment and materials #LI-GV1 MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job Description Protecting Homes. Serving Families. Leading Crews. Lux Foundation Solutions is a growing foundation and structural repair company serving our local communities. We help homeowners protect their homes from structural damage, water intrusion, and foundation failure. We are hiring a Lead Foundation Field Technician / Crew Foreman to run a company truck and lead a crew of 1–3 installers.This is a working leadership role.You lead from the front. You set the pace. You finish strong. What You’ll Do As a Truck Lead, you will: • Operate and maintain a fully equipped company truck, • Lead and direct a crew of 1–3 team members, • Execute foundation and structural repair projects safely and efficiently, • Perform and supervise concrete repair, demolition, masonry, and general construction tasks, • Keep job sites clean, organized, and professional, • Communicate clearly with homeowners and management, • Maintain daily documentation and job progress updates Who Succeeds Here You will do well in this role if: • You show up on time and prepared., • You take ownership of your truck and crew., • You hold steady standards without ego., • You enjoy teaching and guiding other team members., • You keep your crew productive without yelling or drama., • You treat every house like it’s your own. What We Value These are not slogans. This is how we operate: • We are grateful – We recognize effort and appreciate hard work., • We treat each other with respect – No ego. No drama. No excuses., • We work as a team – We win and lose together., • We are community focused – We focus on bettering our community., • We treat every house as if it were our own – No shortcuts. No cutting corners. Requirements • 2+ years of construction experience (foundation/concrete preferred), • Experience leading or supervising small crews, • Reliable transportation to report to the office daily, • Valid driver’s license, • Ability to pass background check and drug screening, • Strong communication skills, • Proven history of reliability and responsibility Compensation & Growth This is a performance driven compensation role based on production and ability to lead and execute. Additional: • Performance-based bonuses (production, quality, safety), • Paid training, • Holiday and vacation pay, • Health insurance contributions (if applicable) Before Applying, Ask Yourself: • Do I take ownership of equipment and results?, • Can I lead without ego?, • Do I keep my crew steady and productive? Company DescriptionChoose a career with Lux Foundation Solutions and be part of an industry that makes a difference. This is your chance to enter a role where you can earn competitive living while helping homeowners protect their home, often their most valuable asset. While enjoying a team culture, which fosters long-term tenure for each valued team member for sustainable long-term growth and healthy family life.Choose a career with Lux Foundation Solutions and be part of an industry that makes a difference. This is your chance to enter a role where you can earn competitive living while helping homeowners protect their home, often their most valuable asset. While enjoying a team culture, which fosters long-term tenure for each valued team member for sustainable long-term growth and healthy family life.

Job DescriptionSalary: You deserve a job that you feel proud of, where you can channel your knowledge and skills into projects that positively affect communities, and where you design your own path. This is Alliant. Become an employee-owner of a growing engineering and consulting firm where we strive to provide a diverse and equitable culture of support and opportunities. Our success is driven by our employee-owners, and we're excited to have you be a part of it. The Impact You'll Have: Alliant Engineering has a great opportunity to get into the Survey field as aSurvey Field Technicianposition! The Survey Field Technician works closely with the Survey Crew Chief to complete assignments in a safe and efficient manner. This position is entry level and requires a self-starter with a positive attitude and willingness to learn. Responsibilities: • Field Work: Assists with field data collection (i.e. use of a prism pole, level rod, etc.) and assigned safety related activities. Ability to set up appropriate survey instrument to perform the requested job, including total stations, GPS receivers, levels, LiDAR sensors, etc. to achieve the required field information. Assists the Survey Party Chief, as needed, with field activity logs and results, safety forms and permits, • Operations Support: Assist the Survey Party Chief with appropriate maintenance of assigned equipment, tools and cleanliness, organization and stocking of warehouse spaces. Promotes a sound safety culture based on understanding risks and hazards and taking appropriate action Qualifications: • High school diploma or equivalent and be 18 years or older, • Position requires great flexibility, with the possibility of out-of-town travel as needed by specific projects, • Position requires working outdoors, • Ability to perform physical work and lift and carry heavy equipment when required, • Valid Florida drivers license and clean driving record, • Must have own transportation, • Operation of field equipment, • Working knowledge of survey instruments, • Knowledge of Trimble data collectors, Total Stations and GPS receivers, • Software comprehension of AutoCAD, Civil3D, MicroStation, GeoPak and general computer skills preferred Benefits: At Alliant, we take care of our employees by offering a world class benefit package including: • Competitive Salary with Bonus Opportunities, • Market-Leading Profit Sharing, ESOP and 401k Contribution Programs, • Medical (with HSA Contribution), Dental, and Vision Plans, • Company Paid Life Insurance, Short-Term Disability and Long-Term Disability, • Flexible Spending Accounts for Medical and Dependent Care, • Wellness Programs and Competitions, • Generous Annual Leave and Compensatory Time Off Programs, • Flexible Schedules, • Casual Work Environment, • Paid Professional Development and Training, • Community Involvement/Charity Events, • Numerous Employee Focused Events (Lunch & Learns, Office Recreation Room, Off-Site Socials, Etc.) Who We Are: Alliant Engineering, Inc., an employee-owned company, is a growing engineering, planning, landscape architecture, and surveying firm with a strong culture of customer service, quality, delivery, and innovation. At Alliant we work hard; we have fun; and we love it. We design solutions that address current needs while paving the way for a brighter future. We provide a culture of diversity, equity, and support, where everyone is given the opportunity to grow and succeed. We approach every project with unwavering confidence yet remain humbly committed to designing work that speaks for itself. At Alliant, our employee-owners are the force behind our success, and we can't wait for you to join us to build better communities with excellence and passion. The selected candidate must be authorized to work for any employer in the U.S. without requiring visa sponsorship now or in the future.

Job Description The Technician is a heavy equipment mechanic that specializes in maintaining and repairing cranes. This position may perform routine maintenance, like lubricating parts, as well as fixing other problems when the crane malfunction. The Technician position work in a safety-first type of environment. HCSG is a 24/7 service company that requires technicians to be available on-call and provide after hour or even weekend services as required due to customer needs. DUTIES & RESPONSIBILITIES • Must be able to be on-call and provide after hour services as required., • Troubleshooting, repairing, inspecting, and upgrading industrial hoists and cranes in the field at customer locations., • Perform OSHA required hoist and crane inspections and generating inspection reports and repair orders., • Communicate with the Service Manager and Branch Manager during the day so that work can be scheduled and completed on a daily basis., • Operate tools, equipment, and vehicles in a safe and responsible manner. Notify immediate supervisor of any deficiencies., • Maintain the ability to work with others in team environment., • Attend company provided trainings and seminars as required., • Participate in HCSG 5 Marks program, • Other duties as assigned PHYSICAL DEMANDS The work is labor intensive. Must be able to lift up to 50lbs on a daily basis. Must be able to lift up to 100lbs on a rare basis. This position requires 90% of frequent climbing, balancing, stooping/crouching, overhead reaching, bending, squatting and prolonged standing and sitting. It requires occasional pushing, pulling, kneeling, and crawling. The position also involves great hand and eye coordination. Heights exceeding over 50 feet from time to time are normal to incur on a daily basis to maintain a crane. Employee will be required to travel from time to time (20 50%) and must be willing to work various shifts to accommodate needs of HCSG branches and customers. This includes on-call and overtime. Travel out of town may be required at the discretion of the company. WORK ENVIRONMENT Work is normally performed inside or outside (pending customer requirements) with varying degrees of extreme hot and cold temperatures depending on the weather. During summer months, temperatures can exceed 120 degrees. This position will be frequently exposed to noise, heights, fumes, dust, and odors. MINIMUM QUALIFICATIONS • 0 - 2 years of crane experience in an industrial facility, • Must have a valid drivers license and acceptable driving record, • Must always commit to working and driving safely, • Must be willing to work off the ground at various heights, • Must have basic computer skills, • Must be able to communicate well with others and work independently or as a team PREFERRED QUALIFICATIONS • Vocational/Technical training certificate, • Some electrical and mechanical knowledge, • Knowledge of hand tools and/or possess hand tools Must be able to pass a pre-employment drug test and background (DISA) and submit to random and annual drug testing as required.

Job Description Are you an experienced Welder/Fabricator looking for a new and exciting challenge? Are you seen as the "Go To" when your coworkers, family, or friends have questions regarding anything marine? Have you ever thought about training the next generation of Technician. Jones Technical Institute might have an amazing opportunity for you to become a Technical Instructor. Never taught? No problem! If you have the drive, patience, and skills we'll train you! Why not take the next step to make that happen for the next generation of technicians. Nothing is more rewarding than seeing the student you taught succeed, knowing you were the one that made it happen! Position Overview: As a Technical Instructor, you'll play a pivotal role in shaping the minds and skills of our students. Your expertise in gasoline and diesel engines, diagnostics, and repair will be the guiding light that leads them to a promising career in many different industries. We believe that hands-on learning is the key to success, so get ready to dive into the world of interactive teaching and inspire the next generation to conquer the challenges of modern marine technology. What We Offer: • $25 - $29 per hour base salary, • Night Compensation incentives, • Weekends OFF, • Paid Training, • Discounted Tuition for you AND your Immediate Family, • Medical/Dental/Vision/Life Ins/STD & LTD Ins, • 401K with employer sponsored matching, • Minimum of 11 Paid Holidays, • Robust Paid Time Off Schedule Responsibilities: • Inspire and Educate: Create an engaging and inclusive learning environment where students can flourish, fostering their passion for welding while imparting your expert knowledge., • Hands-On Training: Lead by example and provide practical demonstrations, ensuring students gain real-world experience., • Curriculum Development: Collaborate with our education team to enhance existing courses and develop new ones that align with industry trends and advancements., • Mentorship: Guide and mentor students on their individual projects, encouraging them to think critically and find innovative solutions., • Education: High school diploma or GED, • Experience: 3 years of practical work experience in the field, • Communication Skills: Strong communication and interpersonal skills, enabling you to effectively connect with students and fellow staff Compass Rose Foundation (CRF) is an 80-year-old Florida chartered non-profit organization that fulfills its mission by governing post secondary institutions. Steeped in the management of career-oriented institutions, its current charge is the development of trade and technical schools. Under this endeavor, CRF has one institution within its auspice of control. Jones Technical Institute (J-Tech), located in Jacksonville offers programs in Automotive, Diesel, Marine & RV Technology as well as HVAC-R and Commercial Truck Driving, Welding and soon to be Network Administration and Security. J-Tech, founded in 2013, is located on the south side of Jacksonville. Our campus is comprised of 28 acres and 168,000 square feet. Since its founding, our Automotive and Diesel programs have produced over 1500 graduates while its Commercial Truck Driving program has assisted almost thousands of graduates obtain a Class A Commercial Driver’s License. We encourage you to review each of the following websites to learn more about who we are: • www. compassrosefoundation.org Job Types: Full-time, Part-time, Temporary, Contract We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description MISTRAS Group, Inc. is seeking TEMP & FULL-TIME NAS410 Level II MT/PT/UTT/VT Technicians for long term work in Jacksonville, Fl. Applicants must be able to provide the following Documents: • High School Diploma/GED/Degree, • Proof of classroom hours/Training in NDT MAJOR RESPONSIBILITIES/ACTIVITIES: • Set up and calibrate equipment., • Conduct tests with appropriate NDT technique(s)., • Interpret, evaluate and document results., • Must be thoroughly familiar with the scope and limitations of the method in which certified and capable of directing the work of trainees and Level I personnel., • Must be familiar with the codes, standards and other contractual documents that control the method as utilized by the employer., • Work with minimal supervision., • Identify and resolve problems in a timely manner., • Obtain and analyze information skillfully., • High School graduate or equivalent required., • Graduate of a specialized NDT technical program meeting SNT-TC1A for one or all of the following is required: UT, RT, MT or PT., • Prior certification as an NDE Level II with one (1) year experience or prior certification as an NDE Level I technician with adequate field experience hours to certify to Level II per SNT-TC1A standards on all or one (1) of the following is required; UT, RT, MT or PT., • Industrial Radiographers Certification Card preferred. (Required for all hired as a Radiographer)., • Completion of a forty (40) hour Radiation Safety Course preferred. (Required for all hired as a Radiographer)., • To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position;, • Problem Solving ~ Identify and resolve problems in a timely manner. Obtain and analyze information skillfully., • Oral Communication ~ Speak clearly and persuasively in positive or negative situations., • Written Communication ~ Edit and present numerical data effectively., • Interpersonal Skills ~ maintain confidentiality., • Planning / Organization ~ Prioritize and plan work activities using time efficiently., • Adaptability ~ Ability to adapt to changes in the work environment. Manage competing demands and able to deal with frequent change, delays and/or unexpected events., • Dependability ~ consistently at work on time, follows instructions, respond to management direction and solicit feedback to improve performance., • Quality ~ demonstrates accuracy, thoroughness and monitor own work to ensure quality., • Field duties require outdoor work in a plant atmosphere., • Interaction with other crew employees, as well as supervisors and clients., • Working in plant and/or shop areas around production machinery with extreme noise levels., • Must be physically fit and able to carry 50 lbs frequently for Radiography work., • Must be able to wear safety equipment as required by the safety department for personal protection., • May be at more than one jobsite in a day and must be able to tolerate climate changes., • Ability to frequently lift and carry 50 pounds., • Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively., • Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to conduct investigations., • Sufficient manual dexterity with or without reasonable accommodations, which permits the employee to perform routine office duties., • Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. #LI-KM1 MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job Description MISTRAS Group, Inc. is seeking FULL-TIME NAS410 Level II Eddy Current Technicians for long term work in Jacksonville, Fl. Applicants must be able to provide the following Documents: • High School Diploma/GED/Degree, • Proof of classroom hours/Training in NDT MAJOR RESPONSIBILITIES/ACTIVITIES: • Set up and calibrate equipment., • Conduct tests with appropriate NDT technique(s)., • Interpret, evaluate and document results., • Must be thoroughly familiar with the scope and limitations of the method in which certified and capable of directing the work of trainees and Level I personnel., • Must be familiar with the codes, standards and other contractual documents that control the method as utilized by the employer., • Work with minimal supervision., • Identify and resolve problems in a timely manner., • Obtain and analyze information skillfully., • High School graduate or equivalent required., • Graduate of a specialized NDT technical program meeting SNT-TC1A for one or all of the following is required: UT, RT, MT or PT., • Prior certification as an NDE Level II with one (1) year experience or prior certification as an NDE Level I technician with adequate field experience hours to certify to Level II per SNT-TC1A standards on all or one (1) of the following is required; UT, RT, MT or PT., • Industrial Radiographers Certification Card preferred. (Required for all hired as a Radiographer)., • Completion of a forty (40) hour Radiation Safety Course preferred. (Required for all hired as a Radiographer)., • To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position;, • Problem Solving ~ Identify and resolve problems in a timely manner. Obtain and analyze information skillfully., • Oral Communication ~ Speak clearly and persuasively in positive or negative situations., • Written Communication ~ Edit and present numerical data effectively., • Interpersonal Skills ~ maintain confidentiality., • Planning / Organization ~ Prioritize and plan work activities using time efficiently., • Adaptability ~ Ability to adapt to changes in the work environment. Manage competing demands and able to deal with frequent change, delays and/or unexpected events., • Dependability ~ consistently at work on time, follows instructions, respond to management direction and solicit feedback to improve performance., • Quality ~ demonstrates accuracy, thoroughness and monitor own work to ensure quality., • Field duties require outdoor work in a plant atmosphere., • Interaction with other crew employees, as well as supervisors and clients., • Working in plant and/or shop areas around production machinery with extreme noise levels., • Must be physically fit and able to carry 50 lbs frequently for Radiography work., • Must be able to wear safety equipment as required by the safety department for personal protection., • May be at more than one jobsite in a day and must be able to tolerate climate changes., • Ability to frequently lift and carry 50 pounds., • Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively., • Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to conduct investigations., • Sufficient manual dexterity with or without reasonable accommodations, which permits the employee to perform routine office duties., • Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations., • Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells. #LI-SS1 This job description reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job Description MISTRAS Group, Inc. is seeking TEMP & FULL-TIME NAS410 Level II MT/PT/UT Technician for long term work in Jacksonville, Fl. Applicants must be able to provide the following Documents: • High School Diploma/GED/Degree, • Proof of classroom hours/Training in NDT MAJOR RESPONSIBILITIES/ACTIVITIES: • Set up and calibrate equipment., • Conduct tests with appropriate NDT technique(s)., • Interpret, evaluate and document results., • Must be thoroughly familiar with the scope and limitations of the method in which certified and capable of directing the work of trainees and Level I personnel., • Must be familiar with the codes, standards and other contractual documents that control the method as utilized by the employer., • Work with minimal supervision., • Identify and resolve problems in a timely manner., • Obtain and analyze information skillfully., • High School graduate or equivalent required., • Graduate of a specialized NDT technical program meeting SNT-TC1A for one or all of the following is required: UT, RT, MT or PT., • Prior certification as an NDE Level II with one (1) year experience or prior certification as an NDE Level I technician with adequate field experience hours to certify to Level II per SNT-TC1A standards on all or one (1) of the following is required; UT, RT, MT or PT., • Industrial Radiographers Certification Card preferred. (Required for all hired as a Radiographer)., • Completion of a forty (40) hour Radiation Safety Course preferred. (Required for all hired as a Radiographer)., • To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position;, • Problem Solving ~ Identify and resolve problems in a timely manner. Obtain and analyze information skillfully., • Oral Communication ~ Speak clearly and persuasively in positive or negative situations., • Written Communication ~ Edit and present numerical data effectively., • Interpersonal Skills ~ maintain confidentiality., • Planning / Organization ~ Prioritize and plan work activities using time efficiently., • Adaptability ~ Ability to adapt to changes in the work environment. Manage competing demands and able to deal with frequent change, delays and/or unexpected events., • Dependability ~ consistently at work on time, follows instructions, respond to management direction and solicit feedback to improve performance., • Quality ~ demonstrates accuracy, thoroughness and monitor own work to ensure quality., • Field duties require outdoor work in a plant atmosphere., • Interaction with other crew employees, as well as supervisors and clients., • Working in plant and/or shop areas around production machinery with extreme noise levels., • Must be physically fit and able to carry 50 lbs frequently for Radiography work., • Must be able to wear safety equipment as required by the safety department for personal protection., • May be at more than one jobsite in a day and must be able to tolerate climate changes., • Ability to frequently lift and carry 50 pounds., • Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively., • Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to conduct investigations., • Sufficient manual dexterity with or without reasonable accommodations, which permits the employee to perform routine office duties., • Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. #LI-KM1 MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job DescriptionDescription: Summary/Objective The field service technician is responsible for troubleshooting electro-mechanical problems, completing installations, and performing unscheduled repairs and scheduled maintenance on equipment, based upon customer demand and need; and to provide complete customer satisfaction in a polite and professional manner. Essential Job Functions: • Effectively analyzes problem situations pertaining to breakdowns of customer equipment and recommends to customer actions necessary to correct situation., • Exhibits a professional demeanor and promotes goodwill between the company and customers by providing a superior level of customer service., • Observes, analyzes, and determines corrective course of action for service and repair of customer equipment., • Performs necessary repairs to correct analyzed situations in a professional and productive manner., • Performs scheduled maintenance on equipment for contracted customers according to Company policies and procedures., • Follows safety rules and ensures that hazardous waste is disposed of properly., • Opens and closes work orders with Dispatch, provides service repair narratives (written and verbal) for customer, and submits paperwork for time worked and repairs completed in a neat, accurate and timely manner., • Accounts for 100% of paid time., • Maintains part inventory and supplies in van., • Maintains service van to ensure that it is clean, organized and hazard free inside and out, • Ensures that regular maintenance is performed on service van (i.e. oil changes, tire rotations, etc.) and that required repairs are performed., • Performs factory authorized modifications per specifications., • Responsible for maintaining personal tools required for performing the job effectively and safely., • Responsible for following customer’s safety and housekeeping guidelines when performing repairs at customer site., • Thoroughness., • Technical Capacity., • Financial Management. This position has no direct supervisory responsibilities. Training Requirements: • General Safety., • Lock-out Tag-out., • HAZMAT., • Electrostatic Discharge Awareness., • Foreign Object Damage Awareness., • Quality System Awareness. Requirements: Required Education and Experience: • A minimum of a high school diploma/GED and/or one to three years mechanical and electrical, experience in a similar environment or equivalent in college or vocational education., • Excellent people skills and verbal communication required., • Knowledge of reading schematics and manuals., • Knowledge of mechanical and electrical equipment., • Skilled in providing excellent customer relations by exchanging information with courtesy and consideration., • Ability to exhibit a professional demeanor, and develop customer relations and superior service., • Ability to effectively communicate (written and verbal) with all levels of an organization internally and externally., • Ability to read and interpret schematics and understand necessary service and training manuals., • Ability to perform arithmetic calculations involving fractions, decimals, and percentages., • Ability to understand and follow verbal and/or demonstrated instructions., • Ability to maintain a good understanding of industry innovations and product availability in order to make recommendations based on customer needs., • Ability to safely operate personal hand tools., • Ability to draw upon available support resources from within the company and recognize when it is appropriate to do such. Experience or Certification(s) in one or more of the following: • Gilbarco Dispenser, • Gasboy Fleet, • Passport, • Veeder Root, • Verifone Must possess a valid driver’s license and maintain a good driving record. Work Authorization/Security Clearance: Security clearance may be required for this position. Work Environment: While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. The position regularly works near moving mechanical parts and in outside conditions that include inclement weather, heat and humidity, and exposure to dust and asphalt. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling and climbing all day. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Personal Protective Equipment: Safety Glasses and hard hats required while performing certain tasks. Position Type/Expected Hours of Work: This is a full-time position, and hours of work and days are Monday through Friday, 8:00 a.m. to 5 p.m. Evening and weekend work may be required as job duties demand. Travel: Local travel is expected for this position. GFT is a Drug-Free Workplace, and we proudly encourage military and veteran candidates to apply. We offer fantastic benefits that include comprehensive coverage, 401K Match, Paid holidays and Paid vacation. To ensure every application receives equal attention, all recruiting is managed by our corporate team. Local branches are unable to provide initial application status updates. If your qualifications match our needs, our recruiting team will be happy to reach out to you directly.

Job DescriptionDescription: The Company Miner Ltd, an OnPoint Company, is an industry-leading service and equipment solutions provider with branch-based operations across the country. OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grow into the company we are today. Miner drives down the cost of warehousing and materials management operations saving our customers revenue and time by understanding their business, finding efficiencies in their operation, providing faster systems repairs and delivering expertly executed scheduled maintenance. For more than 20 years, Miner has consistently delivered professional emergency maintenance service, equipment analysis and proactive preventative maintenance solutions to companies throughout North America. Miner solutions leave their customers more time to focus on their core business – not on the business of maintenance and materials management. Job Summary Our Dock & Door Technicians a.k.a. “Service Professionals” are the core of our preventative and emergency response services for our customers. You may call them a “technician”, but the role is more than using tools to fix broken items. Service Professionals are on the road, troubleshooting complex issues in places like commercial buildings, aircraft hangers, schools, fire/police departments, and much more. A Service Professional might spend an hour fixing a broken door for a hospital garage and an hour later they could be heading to a large warehouse to fix loading dock equipment. This role has unique access to see the inner workings of some of the largest operations in North America, and that’s just before lunchtime.Our people make us great and for us, that starts with finding the right person to fill our open positions. Anyone interested in this role should be able to answer yes to these questions: 1. Do I enjoy variety and complexity?, 2. Does the idea of autonomy and independence excite me?, 3. Can I have fun, while keeping it safe and efficient?, 4. Am I looking for a career family and not just a job?, 5. Would my friends and family describe me as a “tinkerer”? If you answered yes to those questions, we invite you to keep reading and hit that apply button! Room for Growth The exciting news about being a Service Professional is that you can start where your current skills best align with the level of work. Miner offers four levels of Service Professionals so that you can gain, advance, or refine your dock and door abilities. • Apprentice Level (Level I) – best for candidates who have a passion for learning and a willingness to train. Experience working in any related field is a plus, but most importantly an understanding of mechanics and the ability to fix a variety of products is needed., • Service Professional Level (Level II) – this is the sweet spot for anyone who has at least a year of experience in a related field and knowledge of the basic concepts of electrical and hydraulic troubleshooting. Service professionals are well attuned to customers and can communicate effectively while in the field., • Senior Level (Level III) – possesses experience in basic repairs in the AED, Highspeed, or gate fields with a proficient understanding of hydraulic and electrical troubleshooting. Candidates will typically have 4 years of experience in this field. What You’ll Do Service Professionals are responsible for hands-on customer care. They troubleshoot, service, inspect, install, and repair industrial equipment of all shapes and sizes. There is paperwork involved (what job doesn’t have it), as a Service Professional there is expectation that work orders be maintained on paper and digitally. The role operates a vehicle regularly to visit different customer sites and plays a major part in maintaining safety and OSHA compliance for the Company. Requirements: What We Look For Qualified candidates answered “Yes” to all of our questions AND will have in their toolbox, the following skills: • 2-4 years of relevant experience…we care more about how you execute, the quality of your work product, and if you can make an impact to Miner customers., • Ability to repair industrial facilities, including doors, loading docks, and dock-levelers., • Ability or a desire to learn welding, steel fabrication, and electrical. If you have Hydraulic and Pneumatics experience, awesome, call it out on your submission so we know where to find you!, • Ability to take direction and work independently while on the road for hours each day., • Strong communication, problem solving, and analytical skills. The ability to think through complex situations critically is a must., • Technical school training and OEM certifications are desired but not required., • Ability to work a flexible schedule, with nights, weekends, and Holidays. Overtime opportunities are available, so a willingness to work is what we need. We thought you’d never ask. Link to benefits overview: Benefits The benefits listed are subject to change at any time. Please speak with an HR Representative for details. In the case of conflict between the information listed and the official plan documents, the plan documents will always govern. In addition to those benefits, Service Professionals can look forward to: • Competitive pay, including incentives, • Uniform and boot allowance, • Training and the opportunity for growth, • Company issued truck for work travel, • Autonomy and independence, • Competitive PTO and Paid Holidays Miner Ltd. considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. Be aware that job postings on external job boards may not be authorized by OnPoint Group and may contain inaccurate or incomplete information. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Applicants should refer to OnPoint Group’s Careers Page for the most accurate job posting and reach out to the Company with any questions about a job posting. Salary Range The pay range noted represents the company’s good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay.

We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally prote

Benefit packages available – health insurance, life insurance, short-term disability, 401(k) plan with employer match, paid holidays and vacation, paid parental leave, and tuition assistance. All qualified applicants will receive consideration for employment without regard to race, color, religion

We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally prote

Niagara Bottling Inc - - Responsibilities: Train and lead Operators, Mechanics and Supervisors on technical procedures related to high-speed bottle manufacturing and packaging; Rapid identification of machine problems to minimize equipment downtime with root cause analysis conducted to prevent re-o

Brookdale Senior Living - 10790 Old Saint Augustine Road - Responsibilities: Keep interior and exterior of community buildings and grounds in good condition; Respond to maintenance requests from community directors and residents; Perform scheduled and unscheduled maintenance on HVAC, elevator, fire

ISS Facility Management - 7801 Gate Parkway - Responsibilities: Perform preventative and reactive maintenance on building systems; Troubleshoot and repair mechanical/electrical/plumbing/HVAC equipment; Enter work orders and maintain records in CMMS; Respond to client escalations and communicate prof