It technician jobs in Gresham, OregonCreate job alerts

A-Level Diagnostic Technician – High Pay, No Weekends Stop Fighting Underperforming Shops. Build Something Better. If you’re an experienced diagnostic technician who’s tired of flat-rate chaos, inconsistent hours, or shops that don’t value your skill set, this is your opportunity to step into a high-output, well-supported environment where good techs actually get rewarded. All About Automotive is looking for a true A-Level Diagnostic Technician to help take our shop from good to fully maxed out. We’re currently production-limited and ready to grow — but we need the right tech to make it happen. Key Selling Points • $35–$50/hr base pay, • $80,000–$130,000+ OTE potential, • Production bonus starting at 35 billed hours/week, • No weekends – Monday through Friday only, • 100% employer-paid medical, dental, and vision, • High-performing shop with strong service advisor support, • Paid training and continuing education, • Clean, organized 8-bay facility with top-tier equipment, • Relocation assistance available How to Apply (Important) We move fast — and so should you. Step 1: Apply Step 2: Complete a quick phone interview with our AI assistant “Paige” (takes about 10 minutes) After you apply, you’ll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. About the Role This is a production-critical diagnostic position. You will be responsible for owning the entire diagnostic and repair process from start to finish. You’ll be stepping into a shop that already runs strong ARO performance and digital inspections — your role is to help unlock the next level of production and throughput. What You’ll Do • Perform advanced diagnostics on domestic and Asian vehicles, • Own jobs from inspection through repair completion and final verification, • Complete and document digital vehicle inspections (DVI) thoroughly, • Build accurate repair plans and parts lists, • Maintain high efficiency and production standards, • Work closely with service advisors to ensure clear communication and workflow What We’re Looking For • 6+ years of technician experience preferred, • Strong diagnostic capability (this is not a general repair role), • Ability to work independently with minimal supervision, • High attention to detail and strong documentation habits, • Experience with DVIs is a plus, • ASE certifications are preferred but not required Schedule • Monday through Friday, • 8:00 AM – 5:00 PM, • No weekends Compensation & Benefits We believe top-level techs should be paid like it. • Hourly base: $35–$50/hr depending on experience, • Production bonus begins at 35 billed hours per week, • Tiered bonus increases as production increases, • Estimated total compensation: $80K–$130K+ annually Full benefits package includes: • 100% employer-paid medical, dental, and vision, • Simple IRA with 3% company match, • Paid training + education stipend, • 3 days PTO annually (unused PTO paid out), • Uniforms provided, • Relocation support available About All About Automotive We’re a community-focused, high-standards automotive repair shop in Portland, Oregon with a strong reputation for quality work and customer care. • 8-bay facility with Hunter alignment equipment, • Strong DVI process driving $900+ average repair orders, • Modern scan tools including Autel and Snap-on Zeus, • Focused on growth and increasing production capacity, • Currently transitioning to TechMetric shop management software We’re not trying to be the biggest shop — just one of the best places for skilled technicians to build a strong, stable, high-income career. If you're a diagnostic tech who wants consistency, strong pay, and a shop that actually runs organized, this is worth your attention.

VCA Northwest Veterinary Specialists is adding an experienced Certified Veterinary Technician to our Specialty Surgery Team. Location : 16756 SE 82nd Dr, Clackamas, OR 97015 Schedule : FT Sunday-Wednesday 8:30-1900 Compensation : $ 31 - $ 38 / hr Position Summary Provide direct patient care and surgical support to veterinarians. This role focuses on anesthesia, surgical assistance, patient monitoring, and maintaining a safe, efficient clinical environment. --- Key Responsibilities • Patient Care & Monitoring, • · Deliver medical care according to treatment plans, • · Monitor patients and maintain accurate medical records, • · Ensure proper patient identification (ID collar, cage card, documentation) Surgical & Technical Support • ·Assist veterinarians with anesthesia, surgery, radiology, and lab procedures, • · Prepare and restrain patients safely for procedures, • · Maintain surgical logs, anesthesia records, and controlled substance logs Operations & Workflow • · Organize daily treatment and surgical schedules to support efficient workflow, • · Maintain accurate charges for procedures, medications, and services, • · Work independently when needed to ensure continuous patient care Client Communication • Educate clients on treatments, medications, post-op care, and general animal care Facility & Patient Maintenance • · Maintain a clean, safe environment (treatment areas, cages, surgical spaces), • · Ensure patient hygiene, including bathing, feeding, and bedding General Expectations • · Support hospital operations as needed, • · Follow all safety and animal care protocols, • · Work flexible shifts, including nights, weekends, and holidays --- Physical Requirements • · Frequently stand, walk, bend, and restrain animals, • · Ability to lift 40 lbs and assist with moving patients, • · Perform tasks requiring reaching, kneeling, and crouching, • · Work in a fast-paced clinical environment Why join the VCA Northwest Veterinary Specialists Specialty Surgery Team : Benefits: VCA offers a comprehensive benefits package to support the health, well-being, and professional development of its associates. • Mental Health: Access to the Lyra mental health platform, including up to 12 therapy sessions per year, guided self-care, and meditation resources., • Full Healthcare: Comprehensive medical, dental, and vision insurance with HSA/FSA options, as well as fertility benefits., • Paid Time Off: Paid vacation, sick, parental, and bereavement leave., • Financial Support: 100% employer-paid short-term and long-, • Protection: Access to the Better Together Fund for crisis support in qualifying situations., • Perks: Rabies prophylaxis vaccine and titer testing., • Education: Continuing Education (CE) allowance for veterinarians and credentialed veterinary technicians, along with access to WOOF University®, which includes RACE-approved courses., • Latest Tech & Innovation: Opportunities to work with the latest technology and programs that encourage innovation and creativity, such as VCA Next., • Sponsorships: Penn Foster and VTNE test prep sponsorships, as well as VTNE prep courses., • Discounts: Discounted Low-Stress Handling, Fear Free, and AAFP Cat-Friendly certifications, along with VETGirl and VIN subscriptions., • Freebies: Free NAVTA membership and a free subscription to Plumb’s., • Programs: Leadership development and mentorship programs., • Retirement: 401(k) retirement savings plan with increasing employer contribution., • Full Coverage: 100% employer-paid professional liability coverage and life insurance coverage equal to one year’s salary., • Pet Care Perks: Generous pet care discounts and VIP programs., • Advisory Services: Student loan advisory services, tools, and resources., • Legal Resources: Access to legal resources for common legal services. Transfer Opportunities: Nationwide hospital transfer opportunities. If you are a current associate, you will need to apply through our internal career site. Please log into Workday and click on the Jobs Hub app or search for Browse Jobs. Benefits: We offer competitive compensation along with a comprehensive benefits package, including medical, dental, vision and paid vacation/sick days, 401(k), generous employee pet discounts and more! The information in this position description indicates the general nature and level of work to be performed. It is not designed to be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. Management reserves the right to revise the job description or require that other tasks be performed when the circumstances of the job change (for example, emergencies, change in personnel, workload, or technical development) We are proud to be an Equal Opportunity Employer - Veterans / Disabled. For a complete EEO statement please see our career page at vcacareers.com

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned Porsche technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a Porsche Master Technician to join our elite team. If you specialize in Porsche and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest Porsche and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with European vehicles Strong specialization and experience with Porsche vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on Porsche vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc238588

Job Description Our shop is located in GARLAND TX. For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in GARLAND TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned AUDI Master Guild Technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a AUDI Master Guild Technician to join our elite team. If you specialize in AUDI and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest AUDI and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with AUDI vehicles Strong specialization and experience with AUDI vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on AUDI vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc243773

Job Description We're looking for automotive mechanics with a minimum of 3 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Auto Technician, you will perform a full range of automotive repairs—from light maintenance to heavy engine work—and diagnostics on our vehicles, including: • Performing general to complex repairs on all makes and models, ranging from timing belts and suspension systems to heavy engine work., • Diagnosing and repairing advanced vehicle electrical issues, including work on electric and hybrid vehicles., • Completing repairs for wheel bearings and axles, as well as vehicle climate control systems including ACs and heater cores. At Carvana, you'll receive a competitive wage and amazing perks – including but not limited to: 100% company paid healthcare, dental & vision insurance, a 401(k with a Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Starting Pay Range: $25-$39 hourly Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers. • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires We also have a variety of other automotive roles available across our Inspection Center network. Check out our Careers site to learn more! General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English

15975 SE 130th Ave Clackamas, OR 97015 What’s the Job? Ready to accelerate your career while helping our customers move forward? As a Fleet Maintenance Fueler Washer at Penske, you’ll do exactly that. You will make sure vehicles are fueled, clean and safe before they hit the road again. You will be the face of Penske—the person greeting our customers when they arrive and the one sending them off with a smile. Why join Penske as a Fleet Maintenance Fueler Washer, you ask? It’s simple. Maybe you’ve always had an interest in vehicle maintenance but haven’t had the chance to pursue it. This is the perfect place to start. No experience is required. We will introduce you to our vehicle maintenance processes. We will teach you how to use our leading-edge technology. In fact, the training and experience you get here will help you advance to become a technician. And you’ll get to do that learning at a company that offers career stability and competitive benefits. Talk about an amazing opportunity. It’s about going above and beyond for our customers—the way Penske goes above and beyond for you. It’s about building meaningful relationships. It’s about keeping our customers moving forward. Main Responsibilities: • Greeting our customers and making sure they have a great experience as you fuel and wash vehicles • Performing vehicle readiness inspections to make sure tires, fluids, and other basic maintenance items are done • Helping make sure our facilities are clean, safe environments for our customers and associates • Building your skills through training and hands-on coaching to perform minor repairs such as installing mounted tires, replacing or rotating tires and performing preventive maintenance repairs • Completing other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training programs • Advanced vehicle maintenance technology • Location and schedule flexibility General Requirements: • High school diploma, equivalent, or prior work experience preferred • Valid driver’s license required • Excellent customer service and communication skills • The ability to work well as part of a team • The ability and willingness to work outside • Basic mechanical ability and tool usage (preferred) • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. • Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. • Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms. • The associate must be able to safely work in all weather conditions. • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. Pay: 23.00 Shift Differentials: Second shift start times after 11am are eligible for $3.00 per hour shift differential Third shift start time after 9pm are eligible for $4.00 per hour shift differential Benefits: Our excellent benefits plan keeps associates and their families happy, healthy, and secure. To learn more visit https://penske.jobs/benefits/ Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Visit Go Penske to learn more. Job Category: Vehicle Maintenance/Mechanics/Technicians Job Family: Vehicle Maintenance Address: 15975 SE 130th Ave Primary Location: US-OR-Clackamas Employer: Penske Truck Leasing Co., L.P. Req ID: 2606597

Job DescriptionService Technician Location: Portland, OR Pay: $27–$32/hour Overview We are seeking a skilled Service Technician to support the maintenance and repair of industrial smokers and refrigeration systems. This position combines field service (50% travel) and shop-based work, offering a dynamic opportunity for someone who enjoys troubleshooting, hands-on work, and customer interaction. Key Responsibilities • Service, maintain, and troubleshoot industrial smokers and refrigeration units, • Diagnose and repair mechanical, electrical, and refrigeration systems, • Perform preventative maintenance, inspections, and repairs, • Assist with equipment installation, setup, and startup, • Travel to customer sites nationwide (~50% travel after training), • Work independently in the field while staying connected with internal teams, • Support shop operations including testing, repairs, and equipment prep, • Accurately document service work, findings, and repairs, • Follow all safety standards and company procedures, • Represent the company professionally in customer-facing environmentsRequired Skills & Qualifications, • Strong experience in:, • Refrigeration systems, • Electrical troubleshooting, • Mechanical repair, • EPA Universal Certification, • Ability to read and interpret:, • Electrical schematics, • Wiring diagrams, • Technical manuals, • Basic computer skills for reporting and documentation, • Familiarity with preventative maintenance programsPreferred Experience, • Experience servicing industrial smokers, ovens, or commercial refrigeration, • HVAC, refrigeration, or electrical certifications/trainingWhy Join Us?, • 100% employer-paid medical, dental, and vision coverage, • Paid Time Off:, • 1 week after 1 year, • 2 weeks after 2 years, • 401(k) retirement plan, • Opportunity to work with specialized equipment and grow technical skillsWork Environment, • Combination of field service and shop-based work, • 22,000 sq. ft. fabrication shop, • Use of hand tools and technology including PLC troubleshooting, • Safety-focused environment with established protocols and standardsJob Type & Location This is a Contract to Hire position based out of Portland, OR. Pay and Benefits The pay range for this position is $27.00 - $32.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Portland,OR. Application Deadline This position is anticipated to close on Jul 2, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description We're looking for Autobody Repair Technicians with a minimum of 3 years of professional automotive bodywork experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Experienced Auto Body Repair Technician, you'll be expected to perform bodywork on multiple panels, including: • Heavy plastic welding, • Minor metal pulling, • Roof and rocker panel repair, • Large area, heavy bodywork (including Bondo repair) At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 690-7853, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). Not a match for this role? We have a variety of prep roles available, depending on your experience - look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Prepper (min 1 year professional experience): perform light bodywork, including prepping, sanding, and buffing vehicles, removing and installing bumpers, single panel repair (including Bondo repair), and minor plastic welding, • Mid-Level Prepper (min 3-5 years professional experience): perform bodywork on multiple panels, including heavy plastic welding, minor metal pulling, roof and rocker panel repair, stud welding, and large area heavy bodywork (including Bondo repair), • Experienced Prepper (min 5 years professional experience): train other autobody technicians and perform extensive bodywork on multiple panels, including plastic welding, metal pulling, roof and rocker panel repair, and stud welding We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We're looking for Paintless Dent Repair Technicians with a minimum of 3 years of professional automotive PDR experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history, and one of the four fastest companies to make the Fortune 500. As a Mid-Level PDR Technician, you'll be expected to have experience accessing panels, use glue-pulling techniques, and repair smaller-sized dents on both steel and aluminum vehicle panels. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 690-7853, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We're looking for Autobody Repair Technicians with a minimum of 3 years of professional automotive bodywork experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Experienced Auto Body Repair Technician, you'll be expected to perform bodywork on multiple panels, including: • Heavy plastic welding, • Minor metal pulling, • Roof and rocker panel repair, • Large area, heavy bodywork (including Bondo repair) At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 690-7853, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). Not a match for this role? We have a variety of prep roles available, depending on your experience - look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Prepper (min 1 year professional experience): perform light bodywork, including prepping, sanding, and buffing vehicles, removing and installing bumpers, single panel repair (including Bondo repair), and minor plastic welding, • Mid-Level Prepper (min 3-5 years professional experience): perform bodywork on multiple panels, including heavy plastic welding, minor metal pulling, roof and rocker panel repair, stud welding, and large area heavy bodywork (including Bondo repair), • Experienced Prepper (min 5 years professional experience): train other autobody technicians and perform extensive bodywork on multiple panels, including plastic welding, metal pulling, roof and rocker panel repair, and stud welding We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We're looking for Auto Painters with a minimum of 5 years of professional automotive painting experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Painter, you'll be expected to be highly skilled in painting (base coats, tri-coats, solid, metallic, and clear coats), blending adjacent panels, and paint correcting vehicles. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 690-7853, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). Not a match for this role? We have a variety of paint roles available, depending on your experience - look below to see other roles available to help us get our low-mileage, late-model cars ready for our customers: • Paint Prepper (min 6 months professional experience): prepare vehicles for cosmetic paintwork, including sanding, masking, taping, bagging, unbagging/tear down, and buffing, • Entry-Level Painter (min 1 year professional experience): prime vehicles and perform final sanding before the vehicle is painted, along with buffing, touch-up, paint mixing, and airbrush., • Mid-Level Painter (min 3 years professional experience): match/mix paint color and use water-based paint to paint the vehicle inside our paint booths, • Experienced Painter (min 5 years professional experience): painting (base coats, tri-coats, solid, metallic, and clear coats), blending adjacent panels, and paint correcting vehicles. We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We're looking for Auto Painters with a minimum of 3 years of professional automotive painting experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Mid-Level Painter, you'll be expected to match/mix paint color and use water-based paint to paint the vehicle inside our paint booths. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 690-7853, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). Not a match for this role? We have a variety of paint roles available, depending on your experience - look below to see other roles available to help us get our low-mileage, late-model cars ready for our customers: • Paint Prepper (min 6 months professional experience): prepare vehicles for cosmetic paintwork, including sanding, masking, taping, bagging, unbagging/tear down, and buffing, • Entry-Level Painter (min 1 year professional experience): prime vehicles and perform final sanding before the vehicle is painted, along with buffing, touch-up, paint mixing, and airbrush., • Mid-Level Painter (min 3 years professional experience): match/mix paint color and use water-based paint to paint the vehicle inside our paint booths, • Experienced Painter (min 5 years professional experience): painting (base coats, tri-coats, solid, metallic, and clear coats), blending adjacent panels, and paint correcting vehicles. We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We're looking for Airbrush Technicians with a minimum of 1 year of professional automotive painting experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Airbrush Technician, you'll be expected to color-match, mix paint, and airbrush vehicles. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 836-4911, Monday through Friday, between 6 AM and 4 PM MST (9AM to 7PM ET). Not a match for this role? We have a variety of paint roles available, depending on your experience - look below to see other roles available to help us get our low-mileage, late-model cars ready for our customers: • Paint Prepper (min 6 months professional experience): prepare vehicles for cosmetic paintwork, including sanding, masking, taping, bagging, unbagging/tear down, and buffing, • Entry-Level Painter (min 1 year professional experience): prime vehicles and perform final sanding before the vehicle is painted, along with buffing, touch-up, paint mixing, and airbrush., • Mid-Level Painter (min 3 years professional experience): match/mix paint color and use water-based paint to paint the vehicle inside our paint booths, • Experienced Painter (min 5 years professional experience): painting (base coats, tri-coats, solid, metallic, and clear coats), blending adjacent panels, and paint correcting vehicles. We also have a variety of other automotive roles available in one of our 17 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: LOF (Lube, Oil, and Filter), Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Lot Attendant), Photobooth, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We're looking for Autobody Technicians with a minimum of 1 year of professional automotive bodywork experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Auto Body Repair Technician, you'll be expected to perform light bodywork, including: • Prepping, sanding, and buffing vehicles, • Removing and installing bumpers, • Minor plastic welding, • Small area bodywork (including Bondo repair) At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 690-7853, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). Not a match for this role? We have a variety of prep roles available, depending on your experience - look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Prepper (min 1 year professional experience): perform light bodywork, including prepping, sanding, and buffing vehicles, removing and installing bumpers, single panel repair (including Bondo repair), and minor plastic welding, • Mid-Level Prepper (min 3-5 years professional experience): perform bodywork on multiple panels, including heavy plastic welding, minor metal pulling, roof and rocker panel repair, stud welding, and large area heavy bodywork (including Bondo repair), • Experienced Prepper (min 5 years professional experience): train other autobody technicians and perform extensive bodywork on multiple panels, including plastic welding, metal pulling, roof and rocker panel repair, and stud welding We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We're looking for Auto Body Preppers with a minimum of 6 months of professional automotive prepping experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Entry-level Auto Body Repair Technician, you'll be expected to prep vehicles for paint, including sanding, masking, taping, bagging, unbagging/tear down, and buffing. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 690-7853, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). Not a match for this role? We have a variety of paint roles available, depending on your experience - look below to see other roles available to help us get our low-mileage, late-model cars ready for our customers: • Paint Prepper (min 6 months professional experience): prepare vehicles for cosmetic paintwork, including sanding, masking, taping, bagging, unbagging/tear down, and buffing, • Entry-Level Painter (min 1 year professional experience): prime vehicles and perform final sanding before the vehicle is painted, along with buffing, touch-up, paint mixing, and airbrush., • Mid-Level Painter (min 3 years professional experience): match/mix paint color and use water-based paint to paint the vehicle inside our paint booths, • Experienced Painter (min 5 years professional experience): painting (base coats, tri-coats, solid, metallic, and clear coats), blending adjacent panels, and paint correcting vehicles. We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Pharmacy Technician – Outpatient Location: Portland, Oregon Duration: 26 Weeks Schedule • Standard Business Hours, • On-Call Coverage: Approximately 2–3 weekends per year Pay Rate: $33 - $37 per hour (Depending on Experience) Position Overview "Navitas Healthcare, LLC" is seeking an experienced Pharmacy Technician to support pharmacy operations, pharmacy benefit administration, and prior authorization processes within a managed care environment. The ideal candidate will possess strong pharmacy benefit management experience, prior authorization expertise, advanced analytical skills, and the ability to manage multiple priorities in a fast-paced healthcare environment. Key Responsibilities Prior Authorization & Pharmacy Benefits Administration • Process and coordinate pharmacy prior authorization requests according to benefit policies and utilization management guidelines., • Review authorization requests, supporting documentation, and medication utilization criteria., • Escalate complex cases to Clinical Pharmacists or Medical Directors when necessary., • Communicate authorization decisions and medication requirements to providers and prescribers. Pharmacy Operations & Claims Processing • Support pharmacy benefit administration and pharmacy network operations., • Monitor pharmacy claims transactions and eligibility processes., • Research and resolve pended claims, reimbursement requests, and authorization issues., • Process pharmacy claims payments and Direct Member Reimbursements (DMRs)., • Audit pharmacy claims and documentation for accuracy and compliance. Member & Provider Support • Provide exceptional customer service to members, providers, and pharmacies., • Respond to inquiries regarding pharmacy benefits, claims, and prior authorizations., • Resolve complex benefit and medication-related issues. Data Management & Reporting • Maintain pharmacy databases and member eligibility information., • Analyze operational and clinical data using advanced Excel functions., • Develop reports to support quality improvement and operational performance. Coding & Clinical Support • Apply ICD-10, CPT, HCPCS, and pharmacy coding knowledge to support claims and authorization reviews., • Assist with documentation review and coding validation. Training & Process Improvement • Train staff and providers on pharmacy processes and systems., • Develop workflow documentation and job aids., • Participate in process improvement and quality initiatives. Compliance & Regulatory Responsibilities • Maintain compliance with HIPAA, pharmacy regulations, and health plan requirements., • Monitor for fraud, waste, and abuse concerns., • Support audits and regulatory reviews as needed. Required Qualifications • Active Oregon Pharmacy Technician License., • Minimum 2 years of Pharmacy Technician experience in a managed care environment., • Experience handling pharmacy prior authorization reviews., • Experience within managed care, health plan operations, PBM, or utilization management environments., • Advanced Microsoft Excel skills., • Strong knowledge of pharmacy benefits, claims processing, reimbursement, and utilization management., • Excellent analytical, organizational, communication, and customer service skills. Preferred Qualifications • Bachelor's Degree., • Experience with Medicare, Medicaid, Commercial, Individual, and ASO audits., • Experience processing pharmacy claims and benefit determinations. For more details contact at hdavda@navitashealth.com or Call / Text at 516-862-1169. About Navitas Healthcare, LLC: It is a Joint Commission Certified / WBENC and one of the fastest-growing healthcare staffing firms in the US providing Medical, Clinical and Non-Clinical services to numerous hospitals. We offer the most competitive pay for every position we cater. We understand this is a partnership. You will not be blindsided and your salary will be discussed upfront.

Job Description A Logistics company in North Portland is hiring 1 Cable Technician and 2 Cable Pullers for a 6 week project! Job Duties Cable Technician: • Install, terminate, and test copper (Cat5e/Cat6/Cat6a) and fiber optic cabling, • Read and interpret blueprints, schematics, and cable run documentation, • Perform cable terminations (RJ45, patch panels, fiber connectors), • Test and troubleshoot network cabling using certification tools (Fluke, etc.), • Install racks, patch panels, cable management systems, • Ensure installations meet industry standards (TIA/EIA, BICSI) Job Duties Cable Puller: • Pull, route, and secure low-voltage cabling (Cat5e, Cat6, fiber optic, etc.), • Assist in installing cable pathways including tray, conduit, and raceways, • Label and organize cables according to design specifications, • Support cable termination (basic assistance role), • Use hand and power tools safely and efficiently Qualifications Cable Technician: • 2–5+ years of low-voltage or structured cabling experience, • Experience terminating and testing copper and/or fiber cabling, • Ability to read and interpret technical drawings, • Strong troubleshooting skills, • Experience with industry testing equipment Qualifications Cable Puller: • 0–2+ years of experience in cabling, construction, or similar hands-on environment, • Ability to lift 50+ lbs and work on ladders or lifts, • Comfortable in physically demanding environments (ceilings, crawl spaces, etc.), • Strong work ethic and reliability, • Basic understanding of tools and job site safety **If Interested: Please apply to the job application and email Derek at Dmautz @teksystems.com Job Type & Location This is a Contract position based out of Portland, OR. Pay and Benefits The pay range for this position is $18.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Portland,OR. Application Deadline This position is anticipated to close on Jul 1, 2026. About TEKsystems We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Description We are looking for experienced Cable Technicians to support the installation, termination, and testing of structured cabling systems. This role requires hands-on technical expertise and the ability to work independently or lead small teams on-site. 2–5+ years of low-voltage or structured cabling experience Experience terminating and testing copper and/or fiber cabling Ability to read and interpret technical drawings Strong troubleshooting skills Experience with industry testing equipment Preferred Qualifications BICSI certification (Installer, Technician, etc.) Experience in healthcare, enterprise, or data center environments Knowledge of access control, CCTV, or wireless installations (bonus) Soft Skills Strong communication and leadership capabilities Ability to work independently with minimal supervision Detail-oriented with a focus on quality Required Qual for Cable Puller: 0–2+ years of experience in cabling, construction, or similar hands-on environment Ability to lift 50+ lbs and work on ladders or lifts Comfortable in physically demanding environments (ceilings, crawl spaces, etc.) Strong work ethic and reliability Basic understanding of tools and job site safety Job Type & Location This is a Contract position based out of Portland, OR. Pay and Benefits The pay range for this position is $18.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Portland,OR. Application Deadline This position is anticipated to close on Jun 24, 2026. About TEKsystems We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Location: Troutdale, Oregon (in person, not remote) Company: Small, Family-Owned Plumbing Company Full-Time Position: Monday through Friday - 7am to 4pm with some flexibility as needed We are a small, customer-focused plumbing company looking for a highly organized and dependable Construction Coordinator to become a key part of our team. This position is ideal for someone who is adaptable to change and enjoys detail-oriented work, communicating with customers, solving scheduling challenges, and helping keep a fast-paced service company running smoothly. As the central point of communication between our customers, technicians, and management team, you will play an essential role in delivering excellent customer service and supporting day-to-day operations. We are looking for someone who takes pride in staying organized, helping customers, and supporting a hardworking team. If you enjoy being the person who keeps everything moving efficiently behind the scenes, we would love to hear from you. Responsibilities • Answer incoming customer calls professionally and courteously, • Understand and assess customer plumbing concerns, • Schedule plumbing service calls and estimate appointments efficiently, • Coordinate and manage technician schedules throughout the day, • Communicate with technicians and the plumbing manager to ensure jobs stay on track, • File plumbing permits and maintain organized records, • Prepare and send invoices, • Follow up with customers regarding payments and outstanding balances, • Help maintain accurate customer information and job notes, • Help create a positive experience for both customers and fellow team members Qualifications • Prior dispatching, construction coordination, customer service, and Plumbing/HVAC/Electrical or other trade construction industry experience is strongly preferred, • Excellent communication and pleasant customer service skills, • Self-organized with ability to manage multiple detail-oriented tasks simultaneously with strong follow-through, • Ability to stay calm and efficient in a fast-paced environment, • Comfortable using computers, scheduling software (we use Service Titan), email, and phone systems, • Team player with a positive attitude Company DescriptionOh, we love to build! Whether we find a diamond in the rough and rehab an older house with some modern twists or start from the dirt up with a new build...we love it. Our design team at Axiom finds ways to fuse the old bones of a house built by our grandfathers together with design elements and updates that are in high demand with current trends. We even shock ourselves with what we can do with some of the old run-down homes around town!Oh, we love to build! Whether we find a diamond in the rough and rehab an older house with some modern twists or start from the dirt up with a new build...we love it. Our design team at Axiom finds ways to fuse the old bones of a house built by our grandfathers together with design elements and updates that are in high demand with current trends. We even shock ourselves with what we can do with some of the old run-down homes around town!

Job Description Electronics Technician Camas, WA Monday-Friday Day Shift $25-30/hr. Job Description Join a dynamic environment where you'll engage in mechanical assembly, point-to-point electrical wiring, soldering, and wire harness assembly. Work in a prototype setting, directly interacting with schematics and drawings for new product builds. Responsibilities • Assemble wire harnesses and perform soldering tasks., • Conduct box assembly, button-up, and final testing within the electrical assembly department., • Work extensively with harnesses and soldering, adhering to schematics and diagrams., • Perform mechanical assembly tasks., • Responsible for inspection, testing, quality assurance, and troubleshooting of electronics. Essential Skills • Proficiency in electronic assembly and blueprint reading., • Ability to read schematics, wiring diagrams, and mechanical prints., • Experience using hand and power tools is required., • Experience in mechanical assembly, point-to-point electrical wiring, soldering, and wire harness assembly. Additional Skills & Qualifications • Experience with shop tools such as lathes, mills, and drill press is desired., • Basic computer and typing skills., • Basic math skills., • Experience reading blueprints, schematics, or detailed work instructions., • Prior testing and troubleshooting experience preferred., • Experience in prototype builds, R&D labs, or low volume manufacturing. Why Work Here? Experience the excitement of working in a fun, fast-paced engineering consulting company that is currently experiencing explosive growth. Enjoy the opportunity to innovate and contribute to new product developments. Work Environment Work in a standard lab/production setting, utilizing a variety of technologies and equipment. Engage in a dynamic and collaborative environment that fosters innovation and creativity. Job Type & Location This is a Contract position based out of Camas, WA. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Camas,WA. Application Deadline This position is anticipated to close on Jul 2, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Electromechanical Technician Job Description This role focuses on mechanical assembly, point-to-point electrical wiring, soldering, and wire harness assembly in a prototype and low-volume manufacturing environment. You work directly from schematics, wiring diagrams, mechanical drawings, and detailed work instructions to build new products, assemble control panels, and perform final testing. The position combines hands-on electrical and mechanical tasks within an electrical assembly department that supports new product development and engineering projects. Responsibilities • Assemble mechanical and electrical components, including enclosures, subassemblies, and control panels, according to schematics, wiring diagrams, and mechanical prints., • Perform point-to-point electrical wiring and harness assembly, ensuring proper routing, termination, and labeling of wires., • Carry out soldering tasks on connectors, terminals, and electronic components in accordance with quality and safety standards., • Build and assemble wiring harnesses, including cutting, crimping, bundling, and securing wires to meet design specifications., • Complete box assembly and button-up activities, including installing panels, covers, and hardware, and preparing assemblies for final inspection., • Conduct final testing of assemblies and products within the electrical assembly department, following test procedures and documenting results., • Inspect assemblies visually and functionally to verify workmanship quality and adherence to drawings and instructions., • Use hand and power tools, such as power screwdrivers, drills, and other shop tools, to perform assembly and fabrication tasks., • Interpret and follow blueprints, schematics, and detailed work instructions to build prototype and production units accurately., • Support prototype builds and new product introductions by working closely with engineering in a lab and production environment., • Assist with troubleshooting and basic diagnostics of electrical and electromechanical issues under guidance, when needed., • Apply basic computer and typing skills to access work instructions, enter test data, and complete documentation related to builds., • Use basic math skills to measure, verify dimensions, and ensure correct material usage during assembly., • Follow established safety practices, quality procedures, and housekeeping standards in the lab and production areas.Essential Skills, • Experience with mechanical assembly in a manufacturing environment., • Hands-on experience with point-to-point electrical wiring and wire harness assembly., • Ability to perform soldering on electrical and electronic components., • Ability to read and interpret schematics, wiring diagrams, blueprints, mechanical prints, or detailed work instructions., • Experience using hand tools and power tools, including familiarity with power screwdrivers., • Basic computer and typing skills for accessing documentation and recording information., • Basic math skills for measurements, counts, and simple calculations., • Prior assembly experience within a manufacturing or production environment., • Attention to detail and strong focus on quality, inspection, and testing of assembled products., • Capability to follow written and verbal instructions in a fast-paced production setting.Additional Skills & Qualifications, • Experience with control panel assembly and industrial control wiring., • Prior experience with inspection, testing, and quality assurance processes., • Exposure to troubleshooting electronics or electromechanical systems., • Experience using shop tools such as mills, lathes, and drill presses., • Prior testing and troubleshooting experience in an electrical or electronic environment., • Experience in prototype builds, research and development labs, or low-volume manufacturing settings., • Any fabrication experience involving basic machining or fabrication equipment., • Comfort working extensively with harnesses and soldering in an electrical assembly department.Why Work Here? You join a fun, fast-paced engineering consulting environment that is experiencing significant growth, offering ample opportunities to work on innovative products and diverse projects. The culture encourages hands-on problem-solving, collaboration with engineering teams, and continuous learning in a dynamic lab and production setting. You gain exposure to prototype development and cutting-edge technologies while contributing directly to new product builds and real-world solutions. Work Environment The role is based in a standard lab and production environment within an engineering-focused organization. You work extensively with electrical and mechanical assemblies, wiring harnesses, and control panels, using hand tools, power tools, and, when applicable, shop equipment such as mills, lathes, and drill presses. The setting is fast-paced and project-driven, with a strong emphasis on prototype and low-volume builds that require careful attention to schematics, drawings, and detailed work instructions. You can expect a hands-on, collaborative atmosphere where you interact closely with engineering and production staff in a structured yet dynamic lab and production floor. Job Type & Location This is a Contract position based out of Camas, WA. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Camas,WA. Application Deadline This position is anticipated to close on Jun 30, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Technician Paying $25 / HR - $30 / HR Location - Camas, WA Responsibilities: • Mechanical assembly, point to point electrical wiring, soldering, wire harness assembly., • Working in a prototype environment directly with schematics and drawings for new product builds., • Candidates will be responsible for tasks such as harness assembly, soldering, box assembly, button-up, and final testing within the electrical assembly department., • The role involves working extensively with harnesses and soldering, following schematics and diagrams, and performing some mechanical assembly., • Ideal candidates have prior assembly experience, though individuals with minimal training may also be considered. Qualifications: • Point to point wiring, experience with harnessing wires., • Assembly experience within a manufacturing environment., • Experience or familiarity with power screw drivers and hand tools required., • Experience reading blueprints, schematics or detailed work instructions at the very least., • Prior testing and troubleshooting experience, • Any fabrication experience, mills, lathes, drill press Environment/ Shift: • Fun, fast-paced engineering consulting company, currently experience explosive growth., • Employees will be working in a standard lab/production environment., • This is about a 2-4 month long contract., • Day Shift: 8am-5pm, Monday to Friday. If you are looking for a rewarding career with a stable company apply now! Job Type & Location This is a Contract position based out of Camas, WA. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Camas,WA. Application Deadline This position is anticipated to close on Jun 22, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Pharmacy Technician (Outpatient) Location: Portland, OR Type: Local or Travel Contract (26 Weeks) Shift & Schedule: Day Shift | 5 x 8-Hour Shifts | 40 Hours Per Week | 8:00 AM – 5:00 PM | On-Call: 2–3 Weekends per Year Pay Rate: Local: $30 - $34/hr Travel: $35 - $41/hr Including Stipend (Based on Experience) Position Overview: Navitas Healthcare, LLC is seeking an Outpatient Pharmacy Technician for an exciting Local or Travel job in Portland, OR. Responsibilities • Process pharmacy prior authorizations independently using established policies and approval criteria., • Review pharmacy benefits, medication utilization policies, and member eligibility information., • Communicate with members, providers, pharmacies, customer service teams, and regulatory agencies regarding pharmacy-related inquiries., • Serve as a liaison between physicians, pharmacists, office staff, hospitals, members, and payors to resolve issues and facilitate workflows., • Perform intake, triage, documentation, and data entry for authorizations, referrals, medication management programs, and utilization reviews., • Research and resolve pended claims, authorizations, and incomplete records., • Audit pharmacy claims, documentation, and correspondence to ensure accuracy and compliance., • Assist with coding and review processes utilizing ICD-10, CPT, and HCPCS coding systems., • Authorize pharmacy claims and direct member reimbursements according to established guidelines., • Analyze data, prepare reports, and support quality improvement initiatives., • Maintain confidentiality and compliance with HIPAA, state, and federal regulations., • Develop written communications, procedures, and educational materials for providers, pharmacies, and health plan members., • Provide training and technical support regarding pharmacy processes and system usage., • Utilize pharmacy systems, claims processing systems, and Microsoft Office applications, including advanced Excel functions. Required Qualifications • Active Oregon Pharmacy Technician License., • Advanced Microsoft Excel skills., • Bachelor's Degree preferred or a minimum of 2 years of experience as a Pharmacy Technician in a managed care environment., • Experience handling prior authorizations and mandatory audits across Medicare, Medicaid, Commercial, Individual, and ASO plans., • Strong knowledge of pharmacy benefits, claims processing, medication utilization management, and health plan operations., • Working knowledge of medical terminology, HCPCS, CPT, and ICD-10 coding., • Knowledge of pharmacy billing, pharmaceutical calculations, and medication management programs., • Understanding of HIPAA, federal and state pharmacy regulations, and fraud, waste, and abuse prevention., • Excellent verbal, written, analytical, problem-solving, and customer service skills., • Ability to manage multiple priorities and work independently in a fast-paced environment., • Strong attention to detail and commitment to accuracy. Preferred Qualifications • Bachelor's Degree., • Managed care pharmacy experience., • Experience supporting pharmacy benefit administration and health plan operations., • Experience with data analysis, reporting, and quality improvement initiatives. For more details contact at hdavda@navitashealth.com or Call / Text at 516-862-1169. About Navitas Healthcare, LLC: It is a Joint Commission Certified / WBENC and one of the fastest-growing healthcare staffing firms in the US providing Medical, Clinical and Non-Clinical services to numerous hospitals. We offer the most competitive pay for every position we cater. We understand this is a partnership. You will not be blindsided and your salary will be discussed upfront.

Job DescriptionPosition Overview: Gold's Gym Woodinville is seeking a skilled and reliable Part-Time Pool Maintenance Technician to join our team. As a Pool Maintenance Technician, you will be responsible for ensuring the cleanliness, safety, and functionality of the gym's pool and related facilities. This position requires a strong attention to detail, technical knowledge of pool maintenance equipment, and the ability to work independently with minimal supervision. The Part-Time Pool Maintenance Technician will report directly to the Gym Manager. Responsibilities: • Pool Cleaning and Maintenance: Perform routine cleaning and maintenance tasks to ensure the pool is clean, safe, and in compliance with health and safety regulations. This includes skimming debris, vacuuming the pool floor, cleaning the pool walls, maintaining water chemistry, and ensuring proper filtration and circulation., • Chemical Management: Monitor and maintain appropriate chemical levels in the pool, including chlorine, pH balance, alkalinity, and other necessary chemicals. Conduct regular testing using appropriate equipment and adjust chemical levels as needed to ensure a safe and comfortable swimming environment., • Equipment Inspection and Repair: Regularly inspect pool equipment, including pumps, filters, heaters, and other related systems, to identify any issues or malfunctions. Perform minor repairs or adjustments as necessary, and report major issues to the Gym Manager for further action., • Facility Maintenance: Assist with general maintenance tasks related to the pool area, such as cleaning and organizing pool deck furniture, maintaining poolside amenities, and ensuring cleanliness of surrounding areas., • Safety Compliance: Ensure that all safety protocols and guidelines are followed, including the proper use of personal protective equipment (PPE), adherence to chemical handling procedures, and compliance with all local health and safety regulations., • Record Keeping: Maintain accurate records of pool maintenance activities, including chemical tests, maintenance tasks performed, repairs made, and any incidents or accidents that occur. Submit reports to the Gym Manager on a regular basis., • Customer Service: Interact professionally and courteously with gym members and guests, providing assistance and answering any questions or concerns related to pool maintenance or water quality. Qualifications: • High school diploma or equivalent., • Previous experience in pool maintenance or a related field is preferred., • Strong knowledge of pool maintenance techniques, equipment, and chemicals., • Familiarity with health and safety regulations governing pool operations., • Ability to operate pool maintenance equipment, such as vacuums, brushes, and chemical testing kits., • Excellent attention to detail and ability to identify and address maintenance issues promptly., • Strong communication and customer service skills., • Ability to work independently and manage time effectively., • Availability to work flexible hours, including evenings and weekends. Note: This job description is intended to outline the general responsibilities and qualifications of the Part-Time Pool Maintenance Technician at Gold's Gym Camas. It is not an exhaustive list of all duties, responsibilities, or qualifications associated with the position. Duties and responsibilities may be subject to change based on the needs of the gym.

Job DescriptionDescription: Job Type: 30 hours per week Workplace Location: On-Site at One Property Location (32 units) Pay: starting at $23.00 – $30.00 per hour DOE About Us Ad-West Realty Services, Inc. is a professional, full-service property management company specializing in managing affordable housing apartment communities in the states of Washington, Oregon, and Nevada since 1986. We believe that all people deserve affordable, safe, and well cared for homes and strive to make positive differences in others’ lives. To provide the highest quality of management (and enjoy doing so), we find it essential to focus on fostering the respect we give all our communities: colleagues, clients, and tenants. Company Culture · Small, people-oriented company · Professional but casual, family atmosphere · We strive to provide excellent and integrity-backed service for our clients, residents, colleagues, and all others we work with What you will be doing: The Property Maintenance Repair Technician is responsible for maintaining the functionality, safety, and appearance of an apartment complex. This role ensures that maintenance and repair needs are promptly addressed, supporting tenant satisfaction and maintaining high property standards. Primary duties include conducting inspections, completing repairs, responding to emergencies, and managing work orders with accurate documentation. The Technician will also assist with pool maintenance (if applicable), uphold community relations, and maintain compliance with company policies and procedures. Responsibilities and Tasks: · Perform minor and major repairs, including work on buildings, door locks, gates, plumbing, caulking, and pipes. · Conduct inspections of vacated and occupied apartments to identify and address maintenance and repair needs. · Replace light switches, thermostats, and appliance parts such as oven and water heater elements · Maintain outdoor lighting fixtures and repair as needed · Maintain and ensure the safety of swimming pools, where applicable. · Complete work orders with detailed updates, including repair actions, parts used, and time spent. · Ensure accurate and timely submission of maintenance paperwork and associated documentation. · Communicate with the property management team to provide updates on work order status and maintenance issues · Be on-call for emergency repairs, such as fire, electrical, or flood situations. · Maintain positive public relations with the community by performing all tasks in a professional manner. · Other duties as assigned Monitor and maintain the following: · Monitor and maintain the overall condition of the property, including cleanliness, safety, and functionality. · Inspect and ensure the proper operation of plumbing systems, including faucets, pipes, and fixtures · Regularly check and maintain HVAC systems, baseboard heaters, and thermostats. · Monitor and replace outdoor lighting and ensure proper illumination of common areas. · Oversee and maintain swimming pool equipment and chemical levels, if applicable. · Inspect and maintain gates, door locks, and security features to ensure proper operation and safety. · Perform routine checks of appliance functionality, including water heaters, ovens, and other fixtures. · Track and address maintenance needs in common areas, such as landscaping, pathways, and parking lots. · Identify and report potential safety hazards or equipment failures. · Shovel and clear snow from walkways, parking lots, entrances, and other high-traffic areas to ensure safety and accessibility during winter months. · Apply ice melt or other appropriate de-icing materials to prevent slippery conditions. What we look for: · Highschool diploma or equivalent required · Relevant experience in maintenance or a similar role preferred. · Strong mechanical and technical aptitude. · Basic computer skills for maintaining records and work orders. · Strong verbal and written communication skills for coordinating with tenants and the property management team. · Prior experience in property maintenance or facilities management preferred. · Dependability and adaptability to handle a variety of tasks and emergency situations. Physical Requirements: · Ability to walk, stand, and move around the property for extended periods, including climbing stairs and navigating various terrains · Ability to perform physically demanding tasks, including bending, lifting, pushing, pulling, and carrying heavy equipment and materials. · Ability to work in various environmental conditions, including indoor and outdoor settings, with exposure to extreme temperatures, dust, noise, and inclement weather. · Proficient in using tools and equipment safely, including hand and power tools, ladders, and safety gear. · Capability to respond to emergency situations that may require immediate physical intervention. Mental Requirements: · Strong problem-solving and critical thinking skills to assess and resolve maintenance and repair issues efficiently. · Attention to detail to ensure work is performed accurately and safely. · Ability to manage time effectively to prioritize tasks and meet deadlines for work orders and maintenance requests. · Capacity to handle high-pressure situations, such as emergency repairs and safety concerns, with a calm and focused approach. · Capacity to handle high-pressure situations, such as emergency repairs and safety concerns, with a calm and focused approach · Effective communication skills to interact with tenants, property management, and team members in a professional and empathetic manner. Additional Requirements: · Valid Driver’s License and Proof of Insurance · Reliable Mode of Transportation · Light travel maybe required Benefits: · Health insurance for eligible employees: Medical, Dental, Vision, Life, & EAP options · Two weeks of vacation & One week of sick time accrued · 13 Company Paid Holidays All offers of employment are contingent upon the successful completion of a background check. Employees may be subject to random drug testing during their tenure with the company, but drug testing is not a requirement for initial employment Ad-West is an equal opportunity employer and welcomes applications from individuals of all backgrounds, including individuals with disabilities. We are committed to providing equal employment opportunities. If you need accommodation to perform the essential functions of this role, please let us know. Requirements:

Job DescriptionDescription: Job Type: 22 hours per week Workplace Location: On-Site at One Property Location (40 units) Pay: starting at $23.00 – $30.00 per hour DOE About Us Ad-West Realty Services, Inc. is a professional, full-service property management company specializing in managing affordable housing apartment communities in the states of Washington, Oregon, and Nevada since 1986. We believe that all people deserve affordable, safe, and well cared for homes and strive to make positive differences in others’ lives. To provide the highest quality of management (and enjoy doing so), we find it essential to focus on fostering the respect we give all our communities: colleagues, clients, and tenants. Company Culture · Small, people-oriented company · Professional but casual, family atmosphere · We strive to provide excellent and integrity-backed service for our clients, residents, colleagues, and all others we work with What you will be doing: The Property Maintenance Repair Technician is responsible for maintaining the functionality, safety, and appearance of an apartment complex. This role ensures that maintenance and repair needs are promptly addressed, supporting tenant satisfaction and maintaining high property standards. Primary duties include conducting inspections, completing repairs, responding to emergencies, and managing work orders with accurate documentation. The Technician will also assist with pool maintenance (if applicable), uphold community relations, and maintain compliance with company policies and procedures. Responsibilities and Tasks: · Perform minor and major repairs, including work on buildings, door locks, gates, plumbing, caulking, and pipes. · Conduct inspections of vacated and occupied apartments to identify and address maintenance and repair needs. · Replace light switches, thermostats, and appliance parts such as oven and water heater elements · Maintain outdoor lighting fixtures and repair as needed · Maintain and ensure the safety of swimming pools, where applicable. · Complete work orders with detailed updates, including repair actions, parts used, and time spent. · Ensure accurate and timely submission of maintenance paperwork and associated documentation. · Communicate with the property management team to provide updates on work order status and maintenance issues · Be on-call for emergency repairs, such as fire, electrical, or flood situations. · Maintain positive public relations with the community by performing all tasks in a professional manner. · Other duties as assigned Monitor and maintain the following: · Monitor and maintain the overall condition of the property, including cleanliness, safety, and functionality. · Inspect and ensure the proper operation of plumbing systems, including faucets, pipes, and fixtures · Regularly check and maintain HVAC systems, baseboard heaters, and thermostats. · Monitor and replace outdoor lighting and ensure proper illumination of common areas. · Oversee and maintain swimming pool equipment and chemical levels, if applicable. · Inspect and maintain gates, door locks, and security features to ensure proper operation and safety. · Perform routine checks of appliance functionality, including water heaters, ovens, and other fixtures. · Track and address maintenance needs in common areas, such as landscaping, pathways, and parking lots. · Identify and report potential safety hazards or equipment failures. · Shovel and clear snow from walkways, parking lots, entrances, and other high-traffic areas to ensure safety and accessibility during winter months. · Apply ice melt or other appropriate de-icing materials to prevent slippery conditions. What we look for: · Highschool diploma or equivalent required · Relevant experience in maintenance or a similar role preferred. · Strong mechanical and technical aptitude. · Basic computer skills for maintaining records and work orders. · Strong verbal and written communication skills for coordinating with tenants and the property management team. · Prior experience in property maintenance or facilities management preferred. · Dependability and adaptability to handle a variety of tasks and emergency situations. Physical Requirements: · Ability to walk, stand, and move around the property for extended periods, including climbing stairs and navigating various terrains · Ability to perform physically demanding tasks, including bending, lifting, pushing, pulling, and carrying heavy equipment and materials. · Ability to work in various environmental conditions, including indoor and outdoor settings, with exposure to extreme temperatures, dust, noise, and inclement weather. · Proficient in using tools and equipment safely, including hand and power tools, ladders, and safety gear. · Capability to respond to emergency situations that may require immediate physical intervention. Mental Requirements: · Strong problem-solving and critical thinking skills to assess and resolve maintenance and repair issues efficiently. · Attention to detail to ensure work is performed accurately and safely. · Ability to manage time effectively to prioritize tasks and meet deadlines for work orders and maintenance requests. · Capacity to handle high-pressure situations, such as emergency repairs and safety concerns, with a calm and focused approach. · Capacity to handle high-pressure situations, such as emergency repairs and safety concerns, with a calm and focused approach · Effective communication skills to interact with tenants, property management, and team members in a professional and empathetic manner. Additional Requirements: · Valid Driver’s License and Proof of Insurance · Reliable Mode of Transportation · Light travel maybe required Benefits: · Health insurance for eligible employees: Medical, Dental, Vision, Life, & EAP options · Two weeks of vacation & One week of sick time accrued · 13 Company Paid Holidays All offers of employment are contingent upon the successful completion of a background check. Employees may be subject to random drug testing during their tenure with the company, but drug testing is not a requirement for initial employment Ad-West is an equal opportunity employer and welcomes applications from individuals of all backgrounds, including individuals with disabilities. We are committed to providing equal employment opportunities. If you need accommodation to perform the essential functions of this role, please let us know. Requirements:

Description: Position Summary The Service Technician / Mechanic is responsible for system and component installations, repairs, troubleshooting, maintenance, and retrofits to customers equipment or machinery. In this position, you will serve our customers directly on location or in the shop. They will work with our Internal Service Dispatchers and Coordinators to give the customers the best experience possible. It is important that this person has the ability to learn and retain product specific information as it pertains to this position. As SWS is a refuse company, the candidate must be prepared to work on refuse equipment, including stationary equipment like balers and compactors and mobile equipment such as trash trucks, septic trucks, street sweepers, and other related machinery. On the job training as well as formal professional week-long training courses; work under supervision of lead technician. Essential Duties and Responsibilities The essential functions include, but are not limited to the following: • Ensure health & safety is the top priority by adhering to all policies, processes, and safety protocols, • Read and follow engineering (hydraulic & electrical) schematic drawings and technical specifications, • Prepare new equipment for delivery to customers, • Provide customer guidance for improvement, • Assemble, test, and service systems and components, • Travel to job sites as needed (up to 25% travel associated with this position), • Manage workflow to ensure the company meets customer required dates, • Follow the process of paperwork requirements for billing, reports, and other documentation, • Work in environmental conditions to include periods of extreme heat and cold, • Execute other duties as assigned Requirements: Minimum Qualifications • Journeyman-level experience is highly preferred, • Strong mechanical repair expertise with minimal supervision required, • Proficiency with technology and technical systems, • Demonstrates a proactive approach to problem-solving and tasks, • Ability to effectively manage multiple priorities while maintaining an organized and efficient workflow to ensure timely task completion, • Experience with welding processes and techniques, • Familiarity with electrical and hydraulic schematics, • Possession of a comprehensive set of hand tools (beyond basic tools) is required, • Experience with refuse trucks is preferred, • CDL Class A or B certification is strongly preferred, • Mechanical certifications are desirable, but not mandatory, • Must be a legal US resident currently living in the US and legally authorized to work without requiring visa sponsorship. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the functions. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is occasionally required to lift and/or move up to 50 pounds. The employee is occasionally required to stand for long periods of time; walk; use hands to finger, handle, or feel; balance; bend and reach with hands and arms; use feet to operate foot pedal operation and talk or hear. Occasionally required to climb ladders, sit, stoop, kneel, squat, crouch, or crawl. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at-will relationship. SWS Equipment is an equal opportunity employer, drug-free workplace, and complies with ADA regulations as applicable. Compensation details: 25-55 Hourly Wage PI090848703c33-26289-40654514

Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide. Key Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives. Neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices. Remotely disable unsafe ordnance using robotic and diagnostic technology. Conduct parachute and helicopter insertion operations. Clear waterways of mines in support of ships and submarines. Provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State. What to Expect Global missions in every environment, from parachuting into remote terrain to arriving by small boat on foreign shores; majority of time spent in the field conducting high risk, time critical tasks with strict safety and risk management; regular integration with Special Operations, fleet units, and interagency partners; intense physical and mental demands with a culture that values precision, calm decision making, and discipline. Work Environment Operate worldwide on land, at sea, and underwater from EOD Mobile Units and detachments; insert via parachute, helicopter, and small boats; work from ships, shore commands, and forward locations; serve in small team based units that balance training, readiness, and operational tasking with limited administrative overhead compared to field work. Pathways, Training & Advancement Recruit Training followed by an EOD preparatory course at Great Lakes, Illinois, that builds swimming, conditioning, small boat skills, and risk management fundamentals. EOD Assessment and Selection Course that evaluates aquatic adaptability, running, swimming, academics, professionalism, and teamwork. Navy diver training at the Naval Diving and Salvage Training Center. Naval School Explosive Ordnance Disposal, which covers demolition, conventional ordnance, underwater mines, missiles, landmines, and chemical, biological, radiological, and nuclear threats. Basic Parachute Training and ongoing advanced training and qualifications throughout a career. Apply for the Navy Warrior Challenge contract for EOD during initial enlistment, then pass the EOD Physical Screening Test and diver medical screening; complete required assessments and receive recommendation and screening from an EOD officer or senior enlisted EOD technician; additional in service accession requirements may include minimum time on board, performance standards, and command endorsement. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy. A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions. Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges. Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards. Meeting character and conduct standards, including background screening. Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs. Eligibility for a security clearance when required for your rating or designator. Eyesight correctable within EOD diving standards, with no color blindness. Qualifying ASVAB scores using combinations such as arithmetic reasoning and verbal expression or general science, mechanical comprehension, and electronics information. Age typically 30 or younger at accession. United States citizenship and eligibility for a security clearance. Excellent physical condition and swimming ability, with the capacity to perform detailed technical tasks under stress and in hazardous environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Technician II-Equipment (Bulk Chemical)Applylocations: OR - Greshamtime type: Full timeposted on: Posted Todayjob requisition id: R2378-26Are you looking for a unique opportunity to be a part of something great? Want to join a 17,000-member team that works on the technology that powers the world around us? Looking for an atmosphere of trust, empowerment, respect, diversity, and communication? How about an opportunity to own a piece of a multi-billion dollar (with a B!) global organization? We offer all that and more at Microchip Technology Inc.People come to work at Microchip because we help design the technology that runs the world. They stay because our culture supports their growth and stability. They are challenged and driven by an incredible array of products and solutions with unlimited career potential. Microchip’s nationally-recognized Leadership Passage Programs support career growth where we proudly enroll over a thousand people annually. We take pride in our commitment to employee development, values-based decision making, and strong sense of community, driven by our Vision, Mission, and 11 Guiding Values; we affectionately refer to it as the Aggregate System and it’s won us countless awards for diversity and workplace excellence.Our company is built by dedicated team players who love to challenge the status quo; we did not achieve record revenue and over 30 years of quarterly profitability without a great team dedicated to empowering innovation. People like you.Visit our careers page to see what exciting opportunities and company perks await!Job Description:Microchip has an opportunity for a Technician II-Equipment (Bulk Chemical)at our Fab 4 facility in Gresham, Oregon. This position will support Bulk Chemical systems on the front night compressed work week shift (Sun, Mon, Tue, every other Sat 6:15 PM to 6:30 AM).Must practice excellent trouble-shooting methods and be able to work effectively in a team environment.Duties include but are not limited to: Troubleshoot, repair, and maintain semiconductor Bulk chemical systems including: Bulk Chemical and Slurry System Equipment and Distribution Manifolds. Repair and Maintain Kanto/FSI bulk Chemical system. Repair and Maintain CMP FSI and MegaFlow Slurry Distribution system. Maintain the required quality standards on the Chemical blending systems. Material handling responsibilities including - operating forklift, use of appropriate equipment, and procedures for ensuring proper management of hazardous waste, proper labeling of hazardous waste, following proper procedures for handling spills/emergencies, segregation of compatible materials, preparation for waste/containers for shipment. Participate in equipment installation and startup duties including equipment layout, qualification, and commissioning. Demonstrate excellent communication skills by troubleshooting system issues across different teams at Microchip. Work with systems containing electrical, mechanical, liquid hazards. Self-motivation and taking ownership of work performed with a positive approach are key competencies.* Maintain an attitude of willingness to learn, embrace continuous improvement and grow in a team environment.Requirements/Qualifications:Required Qualifications AA degree in a technical field. Or equivalent semiconductor industry experience, military training or technical degree. 2-3 years of experience in equipment maintenance. Electronic and mechanical aptitude. Passion for electronic and mechanical tinkering. Creative thinking, problem-solving, and decision-making skills. Must be competent in MS Office products (Excel, Word, Outlook). Strong organization, documentation, and writing skills.* A successful candidate must be self-directed, self-motivated and work in a highly team-oriented environment with minimal supervision.Preferred Qualifications* 2-3 years of experience in Bulk Chemical equipment maintenance.Special Requirements Comply with all applicable HS&E Standards including, but not limited to: HazMat/Hazwoper certification, PPE, Forklift Operations, Lock Out/Tag Out Program, Confined Space Entry, etc. Participation as an active member of the Fab 4 ERT (Emergency Response Team). Ability to meet the requirements of the ERT physical. Must pass a physical, fit test and medical clearance for the usage of a tight-fitting respirator (SCBA full face mask level). Must maintain physical requirements for wearing SCBA full face mask level. Ability to travel infrequently for training purposes.Critical Physical RequirementsAble to lift, push, pull approx. 100 lbs; carry 50 lbs; sit 5%; stand 60%; walk 35%; must be able to perform activities that include climbing, bending at waist, stooping, kneeling, crouching, reaching, crawling, handling, feeling, hearing, talking, seeing. Work environment could include slippery surfaces, noise or vibrations, mechanical hazards, electrical hazards, fumes or odors, dust or gases.This is a Safety Sensitive position.Travel Time:0% - 25%Physical Attributes:Bending at Waist, Carrying, Climbing, Crawling, Crouching, Dust or gases, Electrical Hazards, Feeling, Fumes or Odors, Handling, Hearing, Kneeling, Lifting, Mechanical Hazards, Pulling, Pushing, Reaching, Seeing, Stooping, TalkingPhysical Requirements:Able to lift, push, pull approx. 100 lbs; carry 50 lbs; sit 5%; stand 60%; walk 35%Microchip Technology Inc is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. For more information on applicable equal employment regulations, please refer to the Know Your Rights: Workplace Discrimination is Illegal Poster.To all recruitment agencies: *Microchip Technology Inc. does not accept unsolicited agency resumes. Please do not forward resumes to our recruiting team or other Microchip employees. Microchip is not responsible for any fees related to unsolicited resumes.* #J-18808-Ljbffr

Overview Be the Connection That Makes a Difference in Patient Care Are you a compassionate Medical Assistant looking to make a difference beyond the exam room? As part of our team, youll play a key role in a primary care or specialty clinic. Here, we go beyond treating symptoms we care for the whole person, addressing not just medical needs but also recognizing the critical social determinants of health. Youll be part of a deeply collaborative care team that includes medical providers, nurses, social workers, behavioral health clinicians, pharmacists, and more all working together to break down barriers to care. Your clinical skills, attention to detail, and patient-centered mindset make you a vital link between our patients and their care providers. If youre looking for a meaningful role where every interaction counts and teamwork drives real change, wed love to meet you. Our benefits meet you where you are.?Were here to help our employees navigate the integration of work and life: • Breathe easy with?medical, dental, and vision?benefits for your family., • Feel supported in your mental health and personal growth with?employee assistance programs., • Feel great and thrive with access to?health and wellness programs, paid time off?and?discounts?for work necessities, such as cell phones. Were proud to foster a hospital culture that values connection, well-being, and fun because when our team thrives, our patients do too. This position is supplemental and will not have any guaranteed hours. It will be to supplement for vacations, sick call, etc. both for LMG Camas and LMG Camas - Acute Care (which has hours outside of the standard Monday-Friday 08-1700). The Acute Care could need this position for vacation and or sick calls, into the evening and the weekend. Responsibilities • Assist with patient care under the direction of physicians., • Prepare patients for office visits and procedures., • Preforms a variety of patient care activities, such as vaccine/medication administration, phlebotomy, and point of care testing., • Provides indirect patient care via phone or EHR by addressing patient questions, processing medication refills and scheduling follow-up appointments., • Utilize electronic health record for efficient care. Qualifications • One year experience as a clinic back office medical assistant preferred.?, • Education:, • Completion of a medical assistant program or equivalent experience; or, • Completion of a formal medical services training program of the United States Armed Forces; or, • Completion of Basic or Advanced Oregon Emergency Medical Technician program (Oregon only) Licensure • MA certification required within one year, from either the American Association of Medical Assistants (AAMA), the American Medical Technologists (AMT), the National Center for Competency Testing (NCCT), or the National Healthcare Association (NHA)., • MA certification requirement may be met instead by current Oregon Emergency Medical Technician (EMT) license and national EMT registration (NREMT). Oregon only., • Washington State certification as a MA or Interim MA required for all who work or float in Washington., • Current BLS for Providers from the American Heart Association. Pay Range USD $23.93 - USD $33.50 /Hr. Our Commitment to Health and Equal Opportunity Our Legacy is good for health for Our People, Our Patients, Our Communities, Our World. Above all, we will do the right thing. If you are passionate about our mission and believe you can contribute to our team, we encourage you to applyeven if you don't meet every qualification listed. We are committed to fostering an inclusive environment where everyone can grow and succeed. Legacy Health is an equal opportunity employer and prohibits unlawful discrimination and harassment of any type and affords equal employment opportunities to employees and applicants without regard to race, color, religion or creed, citizenship status, sex, sexual orientation, gender identity, pregnancy, age, national origin, disability status, genetic information, veteran status, or any other characteristic protected by law. To learn more about our employee benefits click here: www.legacyhealth.org/For-Health-Professionals/careers/benefiting-you

Job DescriptionSalary: $21$25/hour Tier 1 Help Desk Technician Clackamas, OR (ON-SITE) At Bytagig, were more than just an IT service provider were a dedicated partner to small businesses, startups, and entrepreneurs. Whether acting as your full-scale internal IT department or supporting your in-house team, our mission is simple: help your business run efficiently today while preparing for tomorrows growth. We take a people-first approach to technology, ensuring every client receives personal, attentive service tailored to their unique needs. With a deep passion for IT, a drive for continuous improvement, and a commitment to doing whatever it takes, the Bytagig team is here to help you succeed. Our team thrives on curiosity, accountability, and fun because we believe great service starts with a great culture. At Bytagig, you wont just be another cog in the machine youll be part of a team that values innovation, integrity, and growth. We treat our clients like partners and our team like family. What You Can Expect When You Join Us A supportive and collaborative environment where your voice matters Opportunities to grow your skills, tackle exciting challenges, and make a real impact A culture that celebrates learning, accountability, and having fun along the way A team thats passionate about technology and people If you're driven by purpose, eager to learn, and ready to be part of something meaningful wed love to meet you. Bytagig is a great place to grow your career! You will be exposed to a variety of technologies, and if you possess a strong work ethic and a desire to learn, we encourage you to apply. https://www.bytagig.com/about/ Position Overview The Tier 1 Help Desk Technician handles intermediate-level IT support requests from our clients. This role is responsible for proactive maintenance and monitoring using advanced tools and solutions. This position is on-site and requires frequent client site visits in the Clackamas/Portland metro area. Responsibilities Delight our clients with a friendly, quick, and helpful experience Assist the Projects Team with on-site or remote project delivery as needed Manage and monitor problem tickets; analyze incidents and determine support required Apply diagnostic techniques to identify problems, investigate root causes, and recommend solutions Document IT requests in the ticketing system, record actions taken, and follow up on deferred items Keep customers informed of ticket status and progress throughout resolution Collaborate with customers and coworkers to diagnose and resolve issues Troubleshoot, analyze, resolve, track, escalate, and document technical problems Resolve incidents on first contact when possible using supported remote tools Communicate effectively with both technical and non-technical users (speak Geek and human) Train users on proper use of hardware and software Configure and support: Firewalls Wired and wireless networks Access points Perform proactive maintenance and monitoring using advanced tools Escalate issues to Tier II Help Desk when outside the scope or knowledge base Provide frequent on-site user support at client locations Deploy laptops and desktops across client environments Maintain system performance by testing existing equipment and software Perform other duties as assigned Education & Experience High school diploma or GED required Valid drivers license required Ability to manage a flexible schedule and work independently 3+ years of experience working for an MSP at Tier I or Tier II Help Desk level Experience with: Microsoft Azure Windows Server Office 365 / Microsoft 365 Networking fundamentals Familiarity with LAN, WAN, and VoIP technologies Physical Requirements Ability to lift and carry up to 4050 lbs Comfortable working on ladders up to 10 feet Familiar with and able to use basic hand tools (tools provided) Work Location & Schedule Monday Friday 100% on-site Clackamas, Oregon office Frequent travel to local client sites is required Compensation & Benefits Hourly pay: $21$25/hour (DOE) Medical and dental insurance 401(k) with company match Paid Time Off (PTO)

Job DescriptionService Technician Location: Portland, OR Pay: $27–$32/hour Overview We are seeking a skilled Service Technician to support the maintenance and repair of industrial smokers and refrigeration systems. This position combines field service (50% travel) and shop-based work, offering a dynamic opportunity for someone who enjoys troubleshooting, hands-on work, and customer interaction. Key Responsibilities • Service, maintain, and troubleshoot industrial smokers and refrigeration units, • Diagnose and repair mechanical, electrical, and refrigeration systems, • Perform preventative maintenance, inspections, and repairs, • Assist with equipment installation, setup, and startup, • Travel to customer sites nationwide (~50% travel after training), • Work independently in the field while staying connected with internal teams, • Support shop operations including testing, repairs, and equipment prep, • Accurately document service work, findings, and repairs, • Follow all safety standards and company procedures, • Represent the company professionally in customer-facing environmentsRequired Skills & Qualifications, • Strong experience in:, • Refrigeration systems, • Electrical troubleshooting, • Mechanical repair, • EPA Universal Certification, • Ability to read and interpret:, • Electrical schematics, • Wiring diagrams, • Technical manuals, • Basic computer skills for reporting and documentation, • Familiarity with preventative maintenance programsPreferred Experience, • Experience servicing industrial smokers, ovens, or commercial refrigeration, • HVAC, refrigeration, or electrical certifications/trainingWhy Join Us?, • 100% employer-paid medical, dental, and vision coverage, • Paid Time Off:, • 1 week after 1 year, • 2 weeks after 2 years, • 401(k) retirement plan, • Opportunity to work with specialized equipment and grow technical skillsWork Environment, • Combination of field service and shop-based work, • 22,000 sq. ft. fabrication shop, • Use of hand tools and technology including PLC troubleshooting, • Safety-focused environment with established protocols and standardsJob Type & Location This is a Contract to Hire position based out of Portland, OR. Pay and Benefits The pay range for this position is $27.00 - $32.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Portland,OR. Application Deadline This position is anticipated to close on Jun 30, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241496

Job Description We are… Our shop is thriving in our awesome, fast-growing community! Bishops is an accessible, on-trend, sharp, and unpretentious unisex barbershop giving great hair and great customer service! We’re here to empower people to be whoever they want to be, judgement free. We take pride in our craft, go out of our way to be decent human beings, and have a good time doing it. You are... You are thrilled by delivering a great customer experience. You lead by doing. You want to share space with others who see that ordinary can be elevated and transformed. You can… • Communicate both verbally and in writing… really really well, • Recruit, interview, select, train, and develop people… like a boss, • Develop and manage stylists with understanding and knowledge…, • Cut and color men’s and women’s hair… with the best, • Exhibit operational expertise in all facets of the barbershop (or directly relevant) business… You have… • Worked in a fast-paced, high-volume salon environment, • Experience in management, • High-energy, proven ability to work with a broad diversity of people and work groups, • Initiative to self-start and maintain high standards of personal performance and integrity, • Five years’ experience as a licensed hair technician with the ability to teach technical skills to staff, • Up to date cosmetology licensing What we give you... • Competitive salary + service and retail commission, • Opportunity for monthly and quarterly bonuses, • 1 week PTO the first year, more after that, • No dress codes, • An incredibly welcoming environment If this describes you, please send resume, cover letter, letter of recommendation and three professional references. For more information about Bishops, please check us out at bishops.co Company DescriptionBishops is an accessible, on-trend, sharp, and unpretentious unisex barbershop giving great hair and great customer service! We believe different is good, different should be celebrated and we can be different together. We’re here to empower people to be whoever they want to be, judgement free. We take pride in our craft, go out of our way to be decent human beings, and have a good time doing it.Bishops is an accessible, on-trend, sharp, and unpretentious unisex barbershop giving great hair and great customer service! We believe different is good, different should be celebrated and we can be different together. We’re here to empower people to be whoever they want to be, judgement free. We take pride in our craft, go out of our way to be decent human beings, and have a good time doing it.

Job DescriptionOn-Call IT Field Technician – PC, Mac, POS and TV Mounting • Location: Multiple U.S. Cities (Local, Onsite Support), • Job Type: Independent Contractor (1099), • Pay: $35 per hour (on-site), • Schedule: Flexible – You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks on Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks on Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities • Troubleshoot and repair Windows and macOS issues, • Resolve WiFi, router, and wired network problems, • Install and configure printers and scanners, • Replace or upgrade hardware components, • Reinstall operating systems using bootable tools, • Document work and communicate clearly with customers, • Install and support POS systems and run Cat5e or Cat6 cabling, • Perform outdoor TV mounting and basic AV setup Requirements • Two or more years of experience in IT support or field service, • Strong networking and diagnostic skills, • Reliable transportation and valid driver’s license, • Ability to work independently and provide professional customer service, • Ability to lift up to 50 lbs, • Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits • IT and POS work: $35 per hour for time on site, • Outdoor TV mounting: starts at $100 per mounted device, varies if a helper is required, • Flexible scheduling — accept only the jobs that match your route and availability, • National brand recognition and continuous job offers, • Dispatch and tech support team available to assist remotely What to Expect After You Apply • Intro Call – A recruiter will contact you for a quick chat, • Onboarding – Complete paperwork and tax forms electronically, • Background Check – Mandatory before activation, • Set Your Availability – You enter your availability in our tech portal, • Start Receiving Jobs – You’ll be dispatched jobs based on proximity & skills

Job Description The assistant technician is responsible to help the lead technician complete jobs.You will be trained by the owner and other lead technicians how to properly and safely complete the tasks that are asked of you. You will learn how to wash residential and commercial houses/buildings, roofs, concrete surfaces etc. You are asked to provide the highest level of professionalism to all of our customers. This is very important to us. No experience is necessary to take on this job as an assistant technician. Here at 4 Seasons we work hard, but we have fun while doing it. You will be given all the tools needed to be successful and will have the opportunity to get promoted. Our Top Priorities: • Safety, • Professionalism, • Positive Attitude, • Willingness to learn, • Teamwork

Job Description On-Call IT Field Technician – PC, Mac, POS and TV Mounting • Location: Multiple U.S. Cities (Local, Onsite Support), • Job Type: Independent Contractor (1099), • Pay: $35 per hour (on-site), • Schedule: Flexible – You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks On Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks On Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities • Troubleshoot and repair Windows and macOS issues, • Resolve WiFi, router, and wired network problems, • Install and configure printers and scanners, • Replace or upgrade hardware components, • Reinstall operating systems using bootable tools, • Document work and communicate clearly with customers, • Install and support POS systems and run Cat5e or Cat6 cabling, • Perform outdoor TV mounting and basic AV setup Requirements • Two or more years of experience in IT support or field service, • Strong networking and diagnostic skills, • Reliable transportation and valid driver’s license, • Ability to work independently and provide professional customer service, • Ability to lift up to 50 lbs, • Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits • IT and POS work: $35 per hour for time on site, • Outdoor TV mounting: starts at $100 per mounted device, varies if a helper is required, • Flexible scheduling — accept only the jobs that match your route and availability, • National brand recognition and continuous job offers, • Dispatch and tech support team available to assist remotely What to Expect After You Apply • Intro Call – A recruiter will contact you for a quick chat, • Onboarding – Complete paperwork and tax forms electronically, • Background Check – Mandatory before activation, • Set Your Availability – You enter your availability in our tech portal, • Start Receiving Jobs – You’ll be dispatched jobs based on proximity & skills

Job Description WellHaven Pet Health is built on a foundation of "Well People, Well Pets, Well Practice, and Well Community" it's the heart of everything we do. With over 40 hospitals and growing, we are committed to supporting our teams with a positive culture, strong mentorship, and opportunities for growth. Our collaborative, team-centered approach ensures that both pets and people receive the care and support they deserve. Join us in shaping the future of veterinary medicine - Come Grow with Us! Job Summary The Veterinary Technician is a vital member of our veterinary team, pivotal in delivering exceptional veterinary care to animals. This position involves supporting veterinarians to ensure the highest standards of veterinary medicine, educating clients, and delivering compassionate patient care. Key Responsibilities Main Accountabilities: • Assist in the examination, treatment, and monitoring of animals under the supervision of a veterinarian. Administer medications, vaccines, and treatments as prescribed. Monitor vital signs, collect samples for laboratory analysis, and perform diagnostic tests, • Prepare and analyze laboratory samples such as blood, urine, and feces. Operate and maintain laboratory equipment. Perform diagnostic tests, interpret results, and record findings accurately in patient records, • Prepare surgical suites, instruments, and patients for surgery. Assist veterinarians during surgical procedures by providing appropriate equipment and medications, monitoring anesthesia, and providing post-operative care, • Educate clients about Wellness Plans, animal care, nutrition, medication administration, and disease prevention, • Maintain thorough and accurate medical charting for all patients, consistently meeting hospital quality control standards, • Ensure the proper maintenance and functioning of hospital equipment to support patient care, • Assist in managing hospital supplies, including inventory tracking and restocking as necessary, • Contribute to the day-to-day flow and efficiency of the hospital, collaborating with team members to optimize operations, • Act as an advocate for the overall success and performance of the hospital, • Perform select reception duties, such as triaging phone calls, scheduling appointments, and facilitating the intake and discharge of patients Customer Service Delivery: • Consistently provide professional, efficient, and exceptional service, • Demonstrate excellent communication and organizational skills when interacting with the veterinary team and clients, • Effectively adapt to individual clients and their needs, • Effectively resolve customer complaints as appropriate Other: • Adhere to OSHA standards and regulations as outlined in company policies, • Ability to perform other job duties as assigned Required Skills and Knowledge Ability to: • Stay up to date with the latest advancements in veterinary medicine through ongoing professional development and continuing education to maintain certification and improve knowledge and skills, • Work independently and exercise good judgment, • Multi-task effectively, • Complete work, maintaining a high level of accuracy while managing constant interruptions, • Remain action-oriented and effectively set priorities, • Work well in an extremely fast-paced work environment, remaining calm and resilient, • Exhibit proactive initiative in addressing tasks and challenges as they arise, • Learn new computer software systems (EMR, Scheduling, etc.), • Provide a high level of accountability Experience/Knowledge in: • Handling and restraining dogs, cats, and exotic animals, • Providing basic animal care, such as feeding, bathing, grooming, and monitoring for signs of distress or illness, • Knowledge of and experience with common veterinary medical procedures, including surgery, dentistry, radiology, laboratory diagnostics, and anesthesia management, • Familiarity with veterinary medical terminology and abbreviations used in patient records and communication, • Understanding of veterinary medications, including dosage calculations, drug interactions, and administration methods Demonstrates: • Strong customer service focus while effectively adapting to individual clients and their needs, • Excellent communication skills and the ability to manage a variety of emotional situations – remaining empathetic, compassionate, and approachable Education and Experience • High school diploma or equivalent associate degree a plus!, • Must have and maintain a valid certification, registration, or licensing. CVT, RVT, or LVT (state specific), • 1+ years of veterinary hospital experience Work Location, Environment, and Physical Requirements • The Vet Technician position is performed onsite at our hospital or an approved offsite event location. Remote work is not available for this position, • Hospital environment includes limited space, smells from pet waste, and noise (barking, etc.), • Schedules may include 10+ hour shifts, Saturdays, evenings, and holidays, • Good hand-eye coordination, arm-hand-finger dexterity with the ability to reach and grasp, and visual acuity to use a keyboard, operate equipment, and read information, • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus, • Ability to lift 50+ pounds, • Able to stand, walk, stoop, kneel, crouch, and climb, • May routinely be exposed to pets that may bite or scratch, biological hazards, anesthesia medications (smells), radiation if near an Xray machine, prescription medications, including controlled substances Salary Range: $24 - $32 Additional Information Our hospital is part of the WellHaven Pet Health (“WellHaven”) network of hospitals. This allows us to have a more extensive and stronger support system, connecting with other hospitals in the area while remaining autonomous. WellHaven helps veterinarians, and their teams succeed both personally and professionally. We value our medical teams and strive to support each team member each and every day. Our focus on personal growth, practice support, and life balance frame the relationship we want to have with our hospital teams. This people-first approach has made a considerable difference in the lives of our teams, clients, pets, our communities, and the health of our hospitals. We’ve been recognized in Inc. Magazine for making a difference in our community and in Forbes for being named one of America's Best Startup Employers. It is an exciting time to be part of the WellHaven team and an excellent time for you to consider joining us! Please learn more about WellHaven at www.wellhaven.com. WellHaven Benefits WellHaven offers competitive pay and an excellent benefits package. Please review our benefits package at: https://wellhaven.com/wellhaven-employment-benefits/ Commitment to Diversity WellHaven is an Equal Opportunity Employer. WellHaven is committed to complying with all applicable federal, state, and/or local laws prohibiting discrimination based on race, color, creed, religion, national origin, sex (including transgender status), marital status, familial status, status with regard to public assistance, disability, genetic information, sexual orientation, age, military or veteran status, membership or activity in a local human rights commission, or any other status protected by law. In accordance with federal, state, and local law, WellHaven may provide reasonable accommodation to known physical or mental limitations of applicants during the hiring process unless the accommodation would impose an undue hardship on WellHaven. For more information, please contact WellHaven HR at HR@wellhaven.com. Pay Transparency Disclaimer WellHaven Pet Health provides wage range information in accordance with applicable pay transparency laws. Third-party job boards and recruiting platforms may omit or misrepresent this information when reposting our job requisitions. WellHaven Pet Health is not responsible for any discrepancies in such postings. For the authoritative and most up-to-date wage range information for all positions and locations, please refer exclusively to our official careers page: https://wellhaven.com/join-the-team/.

Job Description We're hiring for entry-level auto roles at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. In these entry-level roles, you'll have a number of positions to choose from: • Detailer: detailing vehicles, including washing, interior cleaning, and exterior buffing, • Lot Attendant: move vehicles from one department to the next in our Inspection Centers, • Photobooth Associate: take photos of our vehicles so customers can see our vehicles in our spinners, • Inspection Associate: inspect the interior and exterior of the vehicles and accurately identify any imperfections/defects At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment How To Get Started - join the Carvana team by applying on this page! We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We're hiring for entry-level auto roles at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. In these entry-level roles, you'll have a number of positions to choose from: • Detailer: detailing vehicles, including washing, interior cleaning, and exterior buffing, • Lot Attendant: move vehicles from one department to the next in our Inspection Centers, • Photobooth Associate: take photos of our vehicles so customers can see our vehicles in our spinners, • Inspection Associate: inspect the interior and exterior of the vehicles and accurately identify any imperfections/defects, • Pay: Starting pay for this position is $19/hr., • Schedule: We offer two shifts at this location. Please keep in mind that all locations are subject to mandatory overtime based on business need., • First shift: Mon-Fri 6am-3pm, • Second Shift: Mon-Thurs 4pm-3am, • Location: Our inspection center is located at: 23585 NE Sandy Blvd Wood Village, OR 97060 At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started - join the Carvana team by applying on this page! We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

This is a contract position offering competitive pay within a dynamic work environment. Ideal candidates should have 3-5 years of IT experience and be proficient with Microsoft workstation operating systems. A technology solutions company in Milwaukie, Oregon, is seeking an Information Technology He

Ziply Fiber is committed to employee growth with comprehensive benefits including medical, dental, and retirement plans. This role involves working independently in various conditions, requiring physical capabilities to handle heavy equipment.

Key Responsibilities Install, configure, maintain, and monitor company PCs Provide end user support for all local and web-based applications Troubleshoot hardware and software problems pertaining to desktop and notebook PCs Decommission older computers, including DOD hard drive wipes and detaile