Trabajos it technician en Albuquerque, New MexicoCrear alertas

Job Description Overview Ansible Government Solutions, LLC (Ansible) is currently recruiting Phlebotomists to support the Raymond G. Murphy VA Medical Center located at 1501 San Pedro Dr. SE, Albuquerque, NM 87108. Services will be delivered to all requesting departments throughout the facility. Exceptional compensation packages with full benefits are available. If you accept employment with Ansible, you must also acknowledge that any assigned schedule is subject to change at the direction of either Ansible or its customers. Ansible is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Responsibilities • Performs proper specimen collection and labeling procedures used for routine and special procedures, • Performs all standard laboratory techniques related to phlebotomy such as correcting patient identification, proper collection of samples (volume, tube type, temperature and/or timing conditions) and collection of specimens for urinalysis, 24-hour urines, toxicology and microbiological (sputum and urine), all defined within the standard operating procedures, • Must accession all specimens in receiving area and ensure timely transport and distribution of specimens to all sections of the laboratory for immediate processing and testing; if unable to deliver samples due to peak workloads, contacts sectional personnel to transport samples Qualifications • High school diploma or equivalent, • Phlebotomy certification from an accredited agency (i.e. CPT I/II licensing in California), • Completion of an approved phlebotomy training course (or equivalent), • American Heart Association (AHA) CPR/Basic Life Support (BLS), • Minimum of 1 year of experience within the last 3 years as a patient service technician/phlebotomist, • 2-3 years of phlebotomist experience in an acute care setting is preferred, • Proficiency in the following: blood collection by venipuncture and capillary technique from patients of all age groups, urine drug screen collections, paternity collections, breath/saliva alcohol testing, LCM/Cyber Tools, TestCup, pediatric blood collections, and difficult draws All candidates must be able to: • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance, • Push/pull with 30 lbs of force All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Powered by JazzHR Cug61f4po1

PRIDE Health is seeking a travel Interventional Radiology Technologist for a travel job in Albuquerque, New Mexico. Job Description & Requirements • Specialty: Interventional Radiology Technologist, • Discipline: Allied Health Professional, • Start Date: 07/20/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days, • Employment Type: Travel An Interventional Radiology Technician assists in performing minimally invasive procedures using imaging technology. Responsibilities include preparing patients, operating equipment, and assisting physicians during procedures. Apply for specific facility details. Pride Health Job ID #18464802. Pay package is based on 10 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Rad Tech:Interventional Radiography,07:00:00-17:00:00 About PRIDE Health PRIDE Health is the minority-owned healthcare recruitment division of Pride Global—an integrated human capital solutions and advisory firm. With our robust and abundant travel nursing and allied health employment options across the U.S., PRIDE Health will allow you to help change the way the world lives and heals as it connects you with the industry’s leading healthcare organizations. Pride Global offers eligible employee’s comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors. Benefits • Weekly pay, • Holiday Pay, • Guaranteed Hours, • 401k retirement plan, • Cancelation protection, • Referral bonus, • Medical benefits, • Dental benefits, • Vision benefits

MedPro Healthcare Allied Staffing is seeking a travel Interventional Radiology Technologist for a travel job in Albuquerque, New Mexico. Job Description & Requirements • Specialty: Interventional Radiology Technologist, • Discipline: Allied Health Professional, • Start Date: 07/27/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel MedPro Healthcare Staffing, a Joint Commission-certified staffing agency, is seeking a quality Interventional Radiology Tech for a contract with one of our top healthcare clients. Requirements • Current License in good standing, • Appropriate specialty certifications/credentials, • Eighteen months of Special Procedures/Interventional experience preferred, ideally in a critical care setting., • Other requirements to be determined by our client facility Benefits • Weekly pay and direct deposit, • Full coverage of all credentialing fees, • Private housing or housing allowance, • Group Health insurance for you and your family, • Company-paid life and disability insurance, • Travel reimbursement, • 401(k) matching, • Unlimited Referral Bonuses up to $1,000 Duties Responsibilities The primary responsibility of the Interventional Radiology Tech is to provide assistance with patient care in the Interventional Radiology Department through the provision of technical assistance to the IR team. • Perform diagnostic and interventional imaging procedures in a clinical setting., • Operates conventional, fluoroscopic or radiology equipment to obtain images of designated body parts according to physician specifications and/or orders., • Assists the physician with the performance of various diagnostic and interventional procedures, by monitoring, passing instruments and catheters, observing patient response to procedure, maintaining sterile field, interpreting and evaluating diagnostic data to be utilized by the physician., • Assure compliance with federal, state, and local technical and professional regulations and accepted practiced guidelines., • Delivers quality, cost effective patient care in a professional manner., • Works effectively to maintain an environment of excellence, which is patient focused, providing timely, compassionate, quality patient care., • Prepare and update patient records accurately and legibly. About Agency MedPro Healthcare Staffing is a Joint Commission certified provider of contract staffing services. Since 1983, we have placed nursing and allied travelers in top healthcare facilities nationwide. Join us today for your very own MedPro Experience®. MedPro Staffing is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, national origin, age, sex, disability, marital status or veteran status. Key Words: Cath Lab Tech, CLT, Cardiac Catheter Lab Technician, Cardiac Catheterization, Cardiovascular Technologist, RCIS, EP Tech, Special Procedures Tech, Interventional Tech, Electrophysiology, Electrophysiology Tech, IR Tech *Weekly payment estimates are intended for informational purposes only and include a gross estimate of hourly wages and reimbursements for meal, incidental, and housing expenses. Your recruiter will confirm your eligibility and provide additional details. MedPro Job ID #a0Fcx00000Sm4h8EAB. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Imaging: Interventional Radiology Technologist Imaging: Interventional Radiology Technologist. About MedPro Healthcare Allied Staffing At MedPro Healthcare Staffing, we believe no one cares more for caregivers than we do. Our mission is simple: you focus on your patients, and we’ll take care of the rest. As a Joint Commission-certified leader in temporary and contract healthcare staffing since 1983, MedPro has proudly connected nursing and allied travelers with top healthcare facilities across the nation. With thousands of job opportunities available nationwide, we make it easy to find assignments that align with your goals and lifestyle. Our on-staff clinical support team—alongside a compassionate group of experienced recruiters—provides hands-on guidance every step of the way. From Day 1 medical benefits and a 401(k) plan to personalized career support, we’re committed to ensuring every professional we serve feels valued, cared for, and empowered to succeed. Guided by a CEO who is a Registered Nurse, MedPro is built on a foundation of clinical insight and genuine compassion for the caregiving community. Through The MedPro Experience®, we deliver travel assignments that are rewarding, memorable, and designed to help you DREAM big, EXPLORE often, and ACHIEVE greatness. Benefits • Day 1 medical, dental, and vision benefits for you and your family, • Weekly pay and direct deposit, • Unlimited Referral Bonuses starting at $500, • On Staff Clinical Support Team, • Access to nationwide travel assignments, • MPX+ Mobile app -24/7 real-time access to jobs, credentials, assignment details, and more, • Full coverage of all credentialing fees, • Private housing or housing allowance, • Tax Free Per Diems, Housing Stipends and Travel Reimbursements, • Company-paid life and disability insurance, • Travel reimbursement, • 401(k) matchingBenefits, • Weekly pay, • Employee assistance programs, • Referral bonus

Genie Healthcare is seeking a travel nurse RN Med Surg for a travel nursing job in Albuquerque, New Mexico. Job Description & Requirements • Specialty: Med Surg, • Discipline: RN, • Start Date: 07/27/2026, • Duration: 13 weeks, • 48 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel Join a welcoming Med Surg team that accepts first-time travelers! This is an excellent opportunity to gain travel experience while caring for a diverse adult and geriatric patient population. Position Highlights • Night Shift: 6:30 PM – 7:00 AM, • Self-scheduling, • First-time travelers encouraged to apply, • Weekends as needed, • Floating to similar units may be required based on facility needsUnit Overview, • Adult & Geriatric patients, • 39-bed unit with an average daily census of 30, • Typical nurse-to-patient ratio: 1:6, • Primary patient population includes:, • Stroke (CVA) patients, • Post-surgical patients, • 24/7 Telemetry Monitoring Technician available—RNs are not required to interpret dysrhythmiasRequirements, • Minimum 1 year of Med Surg RN experience, • Active RN License (NM or Compact license accepted pending, must be active before start), • BLS Certification required, • CPI preferred if applicable, • Experience with Epic electronic medical record system required Preferred Clinical Skills\n\nExperience with:\n\nMed Surg/Telemetry\n\nStroke (CVA) patients\n\nPost-neurosurgery care\n\nTelemetry monitoring\n\nIV starts and maintenance\n\nPICC line management\n\nBlood product administration\n\nChest tubes\n\nWound care/Wound Vac\n\nSurgical drains\n\nOxygen therapy\n\nBiPAP/CPAP\n\nFeeding tube care\n\nColostomy/Ileostomy care\n\nHeparin & insulin administration\n\nIsolation precautions\n\nPCA pumps\n\nRapid Response/Code Team participation\n\nInterdisciplinary Support\n\nYou'll work alongside:\n\nPhysical Therapy\n\nRespiratory Therapy\n\nPharmacy\n\nPhlebotomy\n\nRadiology\n\nSocial Services\n\nTransportation\n\nUnit Secretary\n\nRapid Response Team\n\nInterpreter Services About Genie Healthcare Genie Healthcare is one of the fastest growing Nurse Travel Agencies in the USA. Genie serves hundreds of facilities and has over 4000 current travel RN contracts open at any given time. \n\n Genie provides travel RN’s flexibility, support, top pay scale, housing and the #1 rated, multi-state health insurance coverage. \n\n Genie Healthcare carries with it a commitment to providing a comprehensive level of service and quality care. Growing from a small team of eager recruiters to a company with satisfied clients in nearly every corner of the nation, delivering excellence in patient and customer care is the key to Genie’s success. \n\n The management team has 20 years of experience in workforce solutions and staffing in medical and non-medical fields, roles ranging from Clerical job to Cardiologist to software developer to CEO.

Job DescriptionWHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. We currently operate in 40+ locations across 12 states, and we have over 1,500 team members. • Bruckner’s is more than just a place selling parts and working on trucks, • We are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it, • We contribute to our local communities, • We care about our people OUR CORE VALUES • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplace SUMMARY OF DUTIES: Greet customers and initiate the write up process. Determine the customer’s needs and convey this information onto the repair order. Must be able to communicate well in order to document enough information to properly diagnose the vehicle. Responsible for providing supporting documents to determine warranty coverage and open campaigns. Document requests by the customer such as determining method of payment, arrangements to pick up or deliver the vehicle, authorizations, purchase order numbers and any other job functions as required. Acquire customer approvals, provide estimates, book & close all service tickets considered as waiters. Assist with closing other repair orders as needed. Answer incoming service phone calls. Maintain product knowledge as the Liaison between the Service Department and the customer. MARGINAL TASKS: Must be willing to do other miscellaneous tasks as required by and related to the business. SPECIAL REQUIREMENTS: • Must have good communication skills and the ability to interact well with customers, vendors and co-workers in a positive and constructive manner., • This is a safety-sensitive position for which impairment while on the job would present a substantial risk. As a condition of employment, the applicant must submit to pre-employment testing for marijuana. The position is exempt from the state law prohibiting preemployment testing for cannabis use. PHYSICAL REQUIREMENTS: Must be able to pass physical, including drug test. Must maintain a professional appearance. Involves essential ability to climb around, on and under trucks in order to properly inspect and diagnose all types of problems and repairs. Must be able to lift 50 pounds to the waist and 25 pounds to the shoulder. Want to know more about our family-owned company,Proud that our 1500+ employees view us as the employer of choice! YouTube- Service Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Job Description Location Zip Code: 87124 Job Family: Service ProfessionalJob Description We are seeking a hard-working, innovative, detail-oriented and creative team player to join our Aptive team! This is a full-time Pest Control Technician position located on the road in the area around Albuquerque, NM. This position will report to our office in Rio Rancho, NM once per week. The individual we are looking for is also someone that enjoys working in a team environment, and excels working at an individual level. $17.75 - $19.75 an hour Uncapped customer upgrade and referral bonuses - this is unique to us, you’ve never had a bonus structure like this before! Company iPhone provided Save money from driving our vehicle What we offer: Ability to make overtime Company vehicle provided which can be taken home nightly Company gas card provided Ability to work outside in your local area Paid training Group Health, Dental, and Vision plans Pet insurance, Life insurance, and EAP benefits 401K with employer match up to 4% Paid holidays and paid time off Opportunity for advancement Upbeat and exciting company culture and much more! Responsibilities include: Running a daily route where you will be resolving customer pest concerns and issues Maintaining truck and equipment in proper working order Keeping accurate records of treatments provided Mixing, applying, and working with pesticides following state and federal laws Serve as the subject matter expert for your customers by implementing the most efficient and overall best pest solution for each customer's individual needs Maintain and service all route customers according to company standards and procedures Advise customers of potential problems Keep management informed of any problems encountered on service routes Maintain proper inventory of pesticides in usage Please note that you will be assigned a route in your local area Carry a product backpack that weighs approximately 50 lbs Work schedule includes every other Saturday Qualifications: This is an opportunity for a great career with no experience necessary; we will train you A US driver’s license that has been valid for a minimum of 3 years is required A clean driving record is required (no more than one moving violation in the past year and no more than 2 moving violations in the past 4 years) A drug test and background check will be performed on all new hires Aptive Environmental: Aptive Intelligent Pest Control™ is redefining the industry with a smarter, more proactive approach to pest control. By analyzing millions of pest data points across neighborhoods, pest activity, and weather patterns, Aptive tailors treatment plans to help homeowners stay one step ahead. We geek out so our customers don’t freak out. You never thought bugs could be this cool. Our culture is built on accountability, discipline, and high integrity—we work hard and have fun doing it. Aptive has been recognized for both its impact and workplace culture, including Inc. Magazine’s Best in Business and Best of State, Glassdoor’s Top 100 U.S. Workplaces, and Entrepreneur Magazine’s Best Companies in America. And we’re just getting started. To learn more, visit www.aptivepestcontrol.com or follow Aptive on Facebook (@AptivePestControl), Instagram (@Aptive.PestControl), and LinkedIn (@AptiveEnvironmental). *Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please inform your recruiter.

Job Description Responsibilities The Mobile Service Technician is responsible for maintaining the fleet for clients and to handle service calls at client locations. Provide service to our customers while maintaining exceptional customer service. This can include: cleaning, maintenance, visual inspection, and removal of parts and attachments. Installation with the help of proper manuals, report writing, disassembly, assembly, parts reuse evaluation, and reconditioning. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Maintain all aspects of equipment according to company standards., • Handle basic maintenance of the truck including filling tank with fuel, checking oil, keeping it clean, and making sure required inspections are performed and documented as assigned., • Manage inventory control on the service truck and for keeping the vehicle properly stocked., • Report to the Service Manager and will be assigned duties on a daily basis., • Maintain availability for after-hours service calls and be available for an open work schedule., • Maintain and inventory the supplied tools for the work required in maintaining diesel engine trucks and associated equipment, • Read job order and observes and listens to vehicle in operation to determine malfunction and to plan work procedures., • Utilize various diagnostic equipment to determine malfunction and utilize available technical information to determine and perform correct repair procedure., • Diagnosis, removal and replacement of injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, changes or recharges batteries, and replaces transmissions and other parts., • Perform all necessary diagnostic and documentation functions on the company computer system., • Examine protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments., • Lubricate moving parts and drives repaired vehicle to verify conformance to specifications., • Perform preventative maintenance work as requested., • Document and submit necessary paperwork or enter into mobile service program as work performed in an accurate and timely manner., • Respond to customer inquiries regarding the work. Foster positive customer relations., • Advise customer and/or service writer of any repairs or services which should be performed within the next 3 months., • Participate in training and utilize that training in the course of work. Benefits: We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • 7 years' experience as a Class 7 & 8 technician in a dealership or related truck service facility., • Have a current and valid CDL and Medical card as required by the FMVS., • Mechanical aptitude and technical ability is a must., • Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Experience the Matrix Providers Advantage. We strive to provide a framework of stability and structure for our valued employees, where you will experience lower provider-to-patient ratios and fair, reliable schedules. It is our honor to hire Healthcare Heroes to serve our Military Heroes, sharing in our mission to provide excellent healthcare with dignity, compassion, and pride. In return, we are proud to offer you: • Competitive compensation and excellent benefits, including Medical, Dental, and Vision, • 401K with Employer Match, • PTO and Holiday Pay, • Life Insurance, Disability Insurance, FSA, and Commuter Benefits, • Referral Bonuses We support our employees with an accessible dedicated representative to assist you throughout the duration of your contract. We firmly believe that a healthy work/life balance enables you to perform at your best. Our mission is to serve America’s military family by aligning exceptional healthcare workers like you with rewarding career opportunities. Come home to Matrix. Matrix Providers is hiring a Dental Assistant to join our team of talented professionals who provide health care services to our Military Service Members and their families in Kirtland AFB, NM • Employment Status: Full Time, • Compensation: This is an hourly position, paid bi-weekly $28.50 - $29.40/hr + H&W $4.57/hr, • Schedule: Mon-Fri 8 hr days. 7 am - 4 pm, • Benefits: Competitive financial package with a comprehensive insurance package including health, dental, vision, and life coverage., • Accrued Paid Time Off (PTO), • Paid Holidays (Outlined in Handbook), • 401(k) Plan Requirements: The Dental Assistant must have and meet the following: • Degree: Certificate., • Certification: Certified in radiography as required by 42 CFR Part 75., • All training must have included a course in radiation physics; radiation biology; radiation health, safety, and protection; X-ray films and radiographic film quality; radiographic techniques; darkroom and processing techniques; film mounting; and, digital radiographic processing techniques., • Basic Life Support (BLS) from American Heart Association or American Red Cross., • Education: Successful completion of one of the following:, • Certificate or Associate Degree as a dental assistant/technician from a program accredited by the Commission on Dental Accreditation (CODA) of the American Dental Association (ADA) and 12 months of experience within the preceding 36 months., • Certification from a military dental technician or dental assistant school and 12 months of experience within the preceding 36 months., • Certification from a Red Cross Dental Assistant course and 12 months of experience within the preceding 36 months., • Thirty-six (36) months of experience in the preceding 60 months as a private practice or military clinic dental assistant., • Membership in good standing with the American Association of Dental Assistants with required continuing education and 12 months of experience within the preceding 36 months., • Graduation from a state-accredited program for dental assistants or dental technology within the preceding 12 months., • Experience: Six months of experience as a Dental Assistant after graduation. Job Summary: • Performs assisting in one or more phases of complex/difficult restorative, prosthodontic, oral surgical, endodontic, or periodontal treatment. Receives and schedules patients for treatment., • Obtains and records the related medical history of the patient. Chart examination and treatment information. Records information on prescriptions., • Sterilizes instruments, materials, and equipment; prepares surgical trays. Maintains dental equipment in a clean and operative condition., • Assists dentist at chairside. Performs intra-oral procedures as directed by the dentist. Takes preliminary impressions for study models, removes sutures and places, and removes rubber dams, period-packs, matrix bands, and wedges., • Relays the dentist's instructions to the patient for post-treatment care. Instructs patient in proper dental techniques, care of appliances, and causes of dental decay., • Operates dental X-ray equipment to take intra and extra-oral radiographs. Maintains, cleans, and performs minor repairs on X-ray equipment and materials., • Pours and trims models from impressions and constructs custom impression trays. Maintains a variety of recurring reports related to dental activities. Matrix Providers will never request any form of payment from candidates in exchange for consideration for employment. Furthermore, all communication from Matrix Providers will be conducted exclusively through official Matrix Providers email addresses. Any correspondence from alternative email addresses should be considered fraudulent. Matrix Providers is an equal opportunity employer. Qualified applicants will receive consideration for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. For our EEO Policy Statement, please see https://matrixproviders.com/accessibility-eeo-disclaimer. To learn more about our Benefits Packages, please see https://matrixproviders.com/benefits. Matrix Providers endeavors to make www.matrixproviders.com accessible to all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please get in touch with our Recruiting Hotline Number, 1-877-807-8277, TTY LINE, 385-722-8109. This contact information is for accommodation requests only and cannot be used to inquire about the status of applications. #INDKK

Job DescriptionSalary: Imagine walking away from a remodel job knowing: • the site ran smoothly from start to finish, • trades were coordinated and moving forward, • the tile work set the quality bar for the whole job, • and no one is calling you back to fix it If youre a field leader who owns execution and sets the standard in tile, keep reading this role is built for leadership, ownership, and mastery. Who We Are Next Level Restoration & Remodel is an Albuquerque-based restoration and remodel company built around craftsmanship, accountability, and respect for people and we hold those standards on every job. We specialize in restoration and remodel work tile, flooring, drywall, carpentry and we are building a company where: • quality is non-negotiable, • management stays out of the field because the field is owned, • tradespeople are trusted, paid well, and expected to perform We do not cut corners. We do not lower the bar. We do not do good enough. The Role Role Title: Remodel Lead Technician (Tile Expert) Reports To: Remodel Production Manager Status: Full-Time, Field Role You own remodel execution in the field. You lead the people, workflow, and daily execution of remodel projects while also serving as the tile authority on site without constant Production Manager involvement. Your job is to make remodel projects predictable, clean, and well-run with tile work that clearly reflects the Next Level standard. What Success Looks Like You are successful in this role when: • Tile layouts, waterproofing, transitions, and finishes meet a non-negotiable standard, • Punch items are identified early and jobs close clean, • Technicians and Helpers improve because you lead, coach, and set the standard What Youll Do You will: • Lead daily field execution for assigned remodel projects, owning jobsite flow, communication, and momentum, • Serve as the on-site execution leader and representative of the Remodel Production Manager, • Own tile execution start-to-finish, including layouts, waterproofing systems, transitions, and finishes, • Enforce quality and craftsmanship standards across all trades, with authority over tile work, • Identify and resolve jobsite issues before escalation is required, • Maintain clean, safe, and professional jobsites while protecting client property, • Develop Technicians and Helpers through hands-on leadership, with focused coaching in tile execution Who This Role Is For This role is for someone who is: • Authentic and Accountable Speaks straight and owns mistakes and outcomes without excuses, • Respectful and Team Driven Treats people, property, and tools with care and leads by example and raises the standard of others, • Intentional Plans before acting; avoids wasted motion and catches issues before they become rework, • Empathetic Understands and responds appropriately to the needs and emotions of clients and teammates, • Solution Oriented Moves from problem to fix immediately and keeps standards high under pressure, • Craftsmanship Proud Leads with visible pride in elite workmanship, especially tile, • Growth Oriented Actively develops personal mastery and efficiency over time Who This Is NOT For This role is not for you if: • You want to focus only on your own trade and not lead a jobsite, • You need constant direction or supervision, • You avoid accountability for job outcomes, • You get defensive when quality is questioned If you want to be just another installer, this isnt it. What Makes Next Level a Great Place to Work At Next Level, we believe great people thrive in clear systems, high standards, and well-run jobs and thats how weve built this company. Heres what you can expect working here: • Competitive pay aligned with leadership responsibility and elite craftsmanship, • Full-time, steady work with a company focused on long-term growth, • Clear expectations and real ownership youll know exactly what success looks like, • Respect and autonomy no micromanagement, no babysitting, • Strong leadership support Production Managers remove obstacles, not quality, • Room to grow mastery and impact without being pushed into an office role COMPENSATION & BENEFITS This is a full-time, long-term field leadership role not temporary work and not piece rate. Compensation Range: Compensation is based on experience, demonstrated tile expertise, and field leadership capability not titles, tenure, or shortcuts. What we offer: • Medical, Dental, and Vision insurance, • 401(k), • FTO (Flexible Time Off) time off is handled professionally, not micromanaged, • Professional development opportunities focused on improving craftsmanship, efficiency, and field leadership This role is built for professionals who want stability and autonomy without sacrificing standards or benefits. Next Steps If this role sounds like you: • Apply with your basic info and work history, • Well schedule a conversation to confirm alignment, • Final candidates may be asked to walk through past work or field scenarios We move fast and we hire carefully. If you want to lead in the field and set the standard, we want to meet you

Job Description Overview Ansible Government Solutions, LLC (Ansible) is currently recruiting Medical Technologists (Medical Laboratory Scientists) to support the Raymond G. Murphy VA Medical Center located at 1501 San Pedro Dr. SE, Albuquerque, NM 87108. Services will be delivered to both the Anatomic Pathology and Clinical Pathology divisions of the facility. Exceptional compensation packages with full benefits are available. Ansible Government Solutions, LLC (Ansible) is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Responsibilities • Rotate on a regular basis through the areas in which they have been trained and are competent, • Perform a broad range of laboratory procedures in Chemistry, Hematology, Coagulation, Urinalysis, Microbiology, and Transfusion Medicine, • Perform advanced and complex laboratory procedures, recognizing deviation from expected results, analyzing and correcting problems using scientific principles, • Recognize and communicate pre-defined critical results affecting patient care, • Maintain the optimal functioning of laboratory equipment and keep appropriate records for documentation; operate, calibrate, identify malfunctions, repair and perform preventive maintenance of laboratory analyzers, • Perform and document quality control, quality assurance and corrective actions related to test performance using sound statistical principles and theories of performance improvement, • Enter and verify laboratory results in the computer system; recognize deviations from expected results, analyze and correct problems using scientific principles, • Perform other duties as assigned relating to the responsibilities of a Medical Technologist Qualifications • Accredited Bachelors degree in medical laboratory science, medical technology, clinical laboratory science, or a related science (i.e. biology, chemistry, etc.) AND completion of an accredited medical technology clinical practice program (i.e. NAACLS, CAAHEP, ABHES) OR • Accredited Bachelors degree including 16 semester hours in biological science (one course in microbiology), 16 semester hours in chemistry (one course in organic or biochemistry), and one course in mathematics AND two (2) years of post-certification clinical laboratory experience within the last ten (10) years as a certified Medical Laboratory Technician (ASCP-BOC), • A minimum of one (1) year of Medical Technologist experience within the last three (3) years, • Demonstrated knowledge of laboratory medicine techniques and practices, • Demonstrated education and clinical training in the practice of laboratory medicine, • No sponsorship available All candidates must be able to: • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance, • Push/pull with 30 lbs of force All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Powered by JazzHR E1YWPxc429

Job Description ABOUT VEG In 2014, VEG was born with a mission to help people and their pets when they need it most. This meant challenging the status quo and fixing everything that was wrong with the ER experience. Since then, we've expanded rapidly, with hospitals nationwide open 24/7, 365 days a year, and created a better emergency experience—not only for people and their pets, but also for everyone who works here—our VEGgies! At VEG we find a way to say yes to the career you want in veterinary emergency medicine. This means transforming how ER works, from our open-concept hospitals, where you can handle emergency cases of every kind (even exotics!) to our immersive, customer-focused experience, which helps us give people and their pets the care they deserve. This also means saying yes to creating the best experience possible for our VEGgies. Yes to working in an environment where you can find your place and feel valued for the amazing work you do. Yes to having unparalleled opportunities for learning and mentorship so you can grow where you want to go in your career. And yes to making an impact here in ways you never thought possible. VEG is a 2025 and 2026 certified Great Place to Work®. THE JOB At VEG, we don't just hire assistants—we grow future emergency rockstars. As an Emergency Veterinary Assistant, you'll be in the heart of the action from day one, supporting your team, comforting pet parents, and learning the ropes in real time. You'll be there for everything—the triage, the treatments, and the tail wags. You're embarking on a path where careers start, grow, and thrive. Whether you're on your way to becoming a credentialed technician or exploring where your passion can take you, we'll say yes to your growth every step of the way. WHAT YOU'LL DO* • Be the first warm welcome and a steady support, triaging incoming patients and helping guide them toward care, • Assist with treatments, nursing care, and diagnostics, from bloodwork and imaging to catheter placement and oxygen support, • Work alongside our credentialed veterinary technicians and veterinarians to set up and monitor anesthesia and sedation cases, • Set up and manage IV fluids, blood transfusions, and medication administration, • Assist during every moment of care: outpatient or inpatient, exam room to treatment area, • Join patient rounds and stay close to the clinical picture to ensure continuity of care, • Learn how to perform CPR and become a RECOVER Certified Rescuer (training provided!), • Grow into more advanced responsibilities, such as anesthesia support, ultrasound, and catheterization through guided training pathways *As permitted by state law WHAT YOU NEED • High school diploma or equivalent required, • Enrolled in an AVMA-accredited veterinary technology program a plus, • 1+ years in a veterinary assistant role (emergency or specialty experience is a bonus!), • Basic computer skills and an understanding of practice management software and electronic medical record keeping, • Excellent communicator when collaborating with pet parents and your team, • Fine motor skills for handling patients and medical equipment, • Ability to stand for prolonged hours, kneel, and work on the floor as well as ability to lift up to 25 kg on own and able to support up to 40 kg with assistance, • Must be willing to work in a noisy environment with strong or unpleasant odors, • Availability to work nights, weekends, and holidays on a rotating or as needed basis based on hospital demands, • Ability to work well in a fast-paced environment with people from all backgrounds and different personality types WHO YOU ARE • Empathetic, instinctively taking a people-centric approach, whether supporting your colleagues or making an effort to understand different perspectives, • Have a sense of humility; acknowledging mistakes, sharing credit with others, and lifting up your team's' accomplishments, • Feel a strong sense of ownership over your work, taking responsibility for outcomes and staying committed to achieving long-term, impactful results, • Curious by nature; you ask insightful questions and continuously seek out opportunities to learn and grow your skills and knowledge HOW WE INVEST IN YOU • Competitive compensation, including base and 401K match, • Comprehensive health and wellness benefits that start on day one, including medical, dental, and vision coverage, QPR training, and access to free therapy or counseling, • Depending on your role, you may be eligible for equity after one year of full time, active employment with VEG, so you can share in our growth and success, • A BIG focus on learning and growth, from VEG-created clinical and leadership programs to unlimited ER CE + travel stipend (no really!). Full-time credentialed VEGgies receive a $2,500/year travel stipend. Full-time uncredentialed VEGgies receive a $1,000/year travel stipend., • Clinical student loan repayment so you don't need to worry about your student debt, • Paid parental leave; up to 10 weeks at 100% of regular salary and inclusive fertility and family-building care for all types of families, • Flexible work schedules to support your life outside of work, • Generous employee referral program, so our awesome people can bring in more awesome people, • And the little (big) things, like comfy scrubs, cool VEG swag, and food in the fridge for when you're hungry DEI At VEG, diversity is not just a word—it's a strength that fuels innovation and kindness. Our mission is "Helping people and their pets when they need it most." And we do that better when our VEGgies (employees) feel valued, respected, and empowered to bring their authentic selves to work. That's why we're devoted to creating an environment that reflects the diverse communities we serve—where different perspectives are not only welcomed but celebrated. We are focused on providing equitable opportunities for growth, promoting inclusive decision-making, and ensuring that everyone's perspective is considered. Saying yes to VEG means helping us build a culture where your unique experiences and background contribute to a shared vision: being the world's veterinary emergency company.

Job DescriptionWHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. We currently operate in 40+ locations across 11 states, and we have over 1,600 team members. Bruckner’s is more than just a place selling parts and working on trucks: we are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it. OUR CORE VALUES • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER, • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplace JOB SUMMARY This position utilizes our companies Core Values to sell all Bruckner Truck Sales products using technical, organizational, and customer knowledge skills to influence customers and assist them in applying our products/services to their needs resulting in revenue generation for the company and excellent service for our customers. ESSENTIAL POSITION FUNCTIONS AND PRINCIPAL ACCOUNTABILITIES • Sell heavy-duty trucks/trailers and related components spec’s., • Call on prospective customers and assigned accounts within assigned territory, • Maintains contacts with customers in relation to their requirements; keep current on market and customer trends and document all activity in the companies CRM system., • Identifies and profiles prospective customers develop and apply strategy necessary to obtain orders, close potential orders., • Reports on competitive activity, • Keeps informed on new products and other general information of interest to customers that will assist in sales efforts, • Coordinates efforts with outside parts, service, and new and used heavy duty truck sales personnel to achieve full market penetration. Marginal Job Tasks: • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily., • The requirements listed below are representative of the knowledge, skill, and/or ability required., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Skills: Hard Skills: • Possess a valid CDL or the ability to get one in 60 days, at least 2yrs experience in truck sales or applicable experience, computer/telephone skills. Soft Skills: • Verbal communication skills, Aggressive, Self Motivated, Closing ability, Organized, Strong Time Management. Preferred Skills: • Medium & heavy truck Sales experience preferred., • Experience in the heavy-duty truck industry., • Familiar with the commercial community., • Strong customer service & sales skills., • Commercial driver’s license preferred. POSITION REQUIREMENTS Education & Experience: • A minimum high school diploma with appropriate experience is required., • Bachelors degree is preferred., • Must have a minimum 2 years retail sales experience., • Preferably some heavy duty of medium duty truck experience. Management: • The ability to organize and manage multiple priorities. Commitment to company core values. Language Skills: • Good oral and written communication skills. Mathematical Skills and Reasoning Ability: • Adequate skill to prepare sales quotes, sales assistance, and analyze truck market data., • This position requires that the employee plan and prioritize their work load. Want to know more about our family-owned company,Proud that our 1600+ employees view us as the employer of choice! YouTube - Sales Department Video YouTube - Come Join The Family -VideoYouTube - Since 1932 -Video Do not forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Job Description Global Resource Solutions, Inc. (GRS) is seeking an enthusiastic, motivated, detail orientated, and talented individual for the position of Network/System Administrator II. Job Description: Summary: The Network/System Administrator II primary function is working within Special Access Programs (SAPs) supporting Department of Defense (DoD) agencies, such as HQ Air Force, Office of the Secretary of Defense (OSD) and Military Compartments efforts. The position will provide “day-to-day” support for Collateral, Sensitive Compartmented Information (SCI) and Special Access Program (SAP) activities. Essential Duties & Responsibilities: • Install, maintain, audit and support a secure MS Windows network environment and limited web/data application service, • Maintain internet applications and protocols IP,TCP,HTTP, HTTPS, FTP, & SSL, • Maintain file servers, Firewalls, network access, Security Monitoring Systems and system documentation as required, • Interface with local customers and provide IT related support to quickly resolve problems, • Analyze and troubleshoot system anomalies to ensure optimum equipment performance, • Perform periodic maintenance, hardware upgrades and replacement, firmware updates and system configuration changes, • Perform scheduled tape backups on systems as required, • Manage data backup library to include storage of tapes, disks and other magnetic media at the customer’s location and off-site storage facilities as required, • Attend planning and requirements meetings with IT staff, Program Managers and customers as required, • Prepare system for operational use and support operational tests, • Provide technical guidance Requirement: • Three (3) to Five (5) years related experience, • Bachelor’s Degree in a related area or equivalent experience (Four (4) years), • Must meet position and certification requirements outlined in DoD Directive 8570.01-M for Information Assurance Technician Level 2 within 6 months of the date of hire. Security Requirements: • Current Top Secret Clearance with SCI Eligibility, • Eligibility for access to Special Access Programs, • Willingness to submit to a Counterintelligence Polygraph Skills: • Thorough knowledge of Microsoft Windows 2008 R2/2012 R2 Server, Microsoft Exchange Server 2003/2010, Microsoft Windows 7/10 operating systems (OS) administration and associated hardware, • Working knowledge of Local Area Network (LAN) and Wide Area Network (WAN) technologies and data backup technologies to include communication security (COMSEC) integration, • Working knowledge of Risk Management Framework, , Common Criteria, and System Security Policy as they relate to A&A, • Working knowledge and current relevant experience with PL1 & PL2 systems; experience with PL3 & PL4 cross domain solutions desired, • Must be familiar with current security policy/manuals other guiding policy documents, • Must have the ability to work in a dynamic environment and effectively interact with numerous DOD, military/civilian personnel and industry partners, • Working knowledge of Microsoft Office (Word, PowerPoint, and Excel), • Possess a high degree of originality, creativity, initiative requiring minimal supervision, • Willingness to travel within the organizational geographic Area of Responsibility (AOR) (note - could be extensive, and will include both air and ground transportation), • Must be able to lift up to 50lbs Physical Requirements: This position requires employees to be willing and able to: sit, bend, reach, stoop, squat, stand, and walk. Communication: Excellent customer service via phone and face to face conversation, excellent written and oral command of English. GRS is an Equal Opportunity Employer. GRS will continue to abide by obligations under VEVRRA and Section 503 physical or mental disability, protected veteran status, or any other characteristics that are protected by law.

Job Description Job Title: Production Technician Location: Albuquerque, NM Employment Type: 1 Year Contract (Potential to Convert) Shift: Second. 3PM - 11PM, Monday - Friday Position Summary The Ink Operator / Batching Technician is responsible for the safe and efficient production of security inks used in highly regulated applications such as currency, passports, government IDs, and tax stamps. This role supports manufacturing operations with a global leader in security ink and authentication technologies serving governments worldwide. This is a hands-on manufacturing position in a high-security, ISO 14298-regulated environment where quality, safety, and precision are critical. Key Responsibilities • Manufacture ink according to established procedures and production specifications, • Produce batches in alignment with daily production goals and schedules, • Weigh and measure wet and dry chemical ingredients, including work under vacuum systems, • Mix, blend, and prepare chemical batches for ink production, • Load, operate, and monitor industrial mixing and processing equipment, • Operate roller mill machinery to grind pigment particles for proper consistency, smoothness, and color accuracy, • Fill, handle, and transport 5-55 gallon containers throughout the production area, • Clean and sanitize bulk containers, equipment, and workstations after production runs, • Perform tub room duties and general production support tasks as needed, • Deliver ink samples to the quality lab and coordinate with QC personnel, • Support quality testing related to viscosity, tack, and color consistency, • Assist with troubleshooting equipment and minor mechanical issues, • Use pallet jacks, hand tools, and power tools safely and effectively, • Support shipping preparation, material handling, and logistics tasks, • Maintain a clean, organized, and safe work environment at all times, • Follow all SOPs, safety protocols, and regulatory requirements Required Skills & Qualifications • High School Diploma or GED (verified), • Must be 18 years of age or older, • Ability to pass 5-panel drug screen and federal/state background check, • Strong mechanical aptitude and hands-on troubleshooting ability, • Comfortable operating industrial machinery in a manufacturing environment, • Ability to follow written procedures and SOPs accurately, • Basic math skills (high school level), • Strong communication skills (verbal and written), • Ability to lift up to 50 lbs regularly, • Ability to maneuver and roll heavy containers (up to 2,000 lbs on wheels), • Ability to stand for extended periods and perform physically demanding tasks, • Willingness to work in a general labor and team-based production environment, • Strong team player mentality and willingness to support multiple areas of the plant Hiring Requirements • Must be a U.S. citizen, • Must pass background check and drug screening For California Applicants: We will consider for employment all qualified Applicants, including those with criminal histories, in a manner consistent with the requirements of applicable federal, state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance (FCIHO), Los Angeles Fair Chance Ordinance for Employers (ULAC), The San Francisco Fair Chance Ordinance (FCO) , and the California Fair Chance Act (CFCA). This position is subject to a background check based on its job duties, which may include patient care, working with vulnerable populations, access to financial and confidential information, driving, working with heavy machinery, or working in a warehouse or laboratory environment. Due to these job duties, this position has a significant impact on the business operations and reputation, as well as the safety and well-being of individuals who may be cared for as part of the job position or who may interact with staff or clients. Company DescriptionHere at Medix, we are dedicated to providing workforce solutions to clients throughout multiple industries. We have been named among the Best and Brightest Companies to Work For in the Nation for two consecutive years. Medix has also been ranked as one of the fastest growing companies by Inc. Magazine. Our commitment to our core purpose of positively impacting 20,000 lives affects not only the way we interact with our clients and talent, but also with our co-workers! The goal is lofty, but it is made attainable through the hard work and dedication of our teams and their willingness to lock arms together. Are you ready to lock arms with us?Here at Medix, we are dedicated to providing workforce solutions to clients throughout multiple industries. We have been named among the Best and Brightest Companies to Work For in the Nation for two consecutive years. Medix has also been ranked as one of the fastest growing companies by Inc. Magazine.\r\n\r\nOur commitment to our core purpose of positively impacting 20,000 lives affects not only the way we interact with our clients and talent, but also with our co-workers! The goal is lofty, but it is made attainable through the hard work and dedication of our teams and their willingness to lock arms together. Are you ready to lock arms with us?

Job Description The EPMS (Electrical Power Monitoring System) Technician is responsible for the successful integration, configuration, and support of electrical power monitoring solutions within industrial and commercial environments. This role requires knowledge of communication protocols such as Modbus TCP/IP, BACnet IP, and IEC 61850, as well as hands-on experience with electrical systems, network infrastructure, and automation platforms. Key Responsibilities • Commission EPMS solutions, ensuring seamless integration with electrical distribution and monitoring equipment., • Develop and configure communication interfaces using Modbus TCP/IP, BACnet IP, and IEC 61850 protocols to enable data exchange between devices, systems, and enterprise applications., • Metering configuration and testing; Multifunction PMs, Power Quality Meters, Sub-Metering and Branch Circuit Monitoring. Integration of Protective Relays, Breaker Monitoring, UPS, ATS, Generator Monitoring., • Work with Schweitzer Engineering Laboratories (SEL) meters and other industry-standard devices., • Collaborate with project managers, electrical engineers, and IT professionals to gather requirements, define integration strategies, and deliver solutions on schedule., • Troubleshoot communication issues, diagnose network problems, and provide technical support during installation and post-commissioning phases., • Create and maintain project documentation, including system architecture diagrams, network topologies, configuration files, and test procedures., • Conduct training sessions for end-users and operations staff on EPMS functionalities and best practices., • Stay updated on industry standards, emerging technologies, and protocol updates relevant to EPMS and building automation systems. Required Skills and Qualifications • Associate degree or technical certification in Electrical Engineering Technology, Instrumentation, or a related field (or equivalent hands-on experience)., • Solid understanding of three-phase power systems, electrical distribution, and metering principles., • Experience with Schweitzer Engineering Laboratories (SEL) or equivalent intelligent electronic devices (IEDs)., • Familiarity with IEC 61850, Modbus, DNP3, or other industrial communication protocols., • Ability to read and interpret one-line diagrams and control schematics., • Strong verbal and written communication skills. Preferred Qualifications • Experience with leading EPMS software platforms (e.g., Schneider Electric, Siemens, ABB, Eaton)., • Experience with Ignition SCADA, • Certification in industrial automation, networking, or related fields., • Experience with scripting or programming for device integration (e.g., Python, IEC 61131-3 languages)., • Familiarity with additional protocols such as DNP3, OPC UA, or SNMP. Work Environment • Travel required, heavy travel at times. Temporary relocation also possible., • Interaction with engineering, IT, and operations teams in industrial or commercial facilities., • Adherence to safety protocols and electrical standards during site visits and system commissioning. We are 100% employee-owned through an Employee Stock Ownership Plan (ESOP). This is a retirement benefit for our employees that is wholly paid for by the company in addition to 401(k) options for employee contributions. There are approximately 7,000 ESOPs in the United States, governed by the IRS and the U.S. Department of Labor. Research indicates that ESOP companies tend to grow faster in sales and employment. ESOP employees tend to have 2.2 times as much in retirement savings as employees in traditional companies. In addition to an ESOP, we offer medical, dental, vision, life insurance and PTO! This job description is intended to provide information regarding the essential functions and basic duties of this position. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and duties that could be assigned. Additional functions and requirements may be assigned by management as it deems appropriate. This document does not constitute a contract and is subject to change at the discretion of Hoffman Building Technologies. No Phone Calls or Drop-Ins Please. EEO Employer/Vets/Disabled

Job DescriptionWHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. We currently operate in 40+ locations across 11 states, and we have over 1,600 team members. • Bruckner’s is more than just a place selling parts and working on trucks, • We are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it, • We contribute to our local communities, • We care about our people OUR CORE VALUES • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplace SUMMARY OF DUTIES: Greet customers and initiate the write up process. Determine the customer’s needs and convey this information onto the repair order. Must be able to communicate well in order to document enough information to properly diagnose the vehicle. Responsible for providing supporting documents to determine warranty coverage and open campaigns. Document requests by the customer such as determining method of payment, arrangements to pick up or deliver the vehicle, authorizations, purchase order numbers and any other job functions as required. Acquire customer approvals, provide estimates, book & close all service tickets considered as waiters. Assist with closing other repair orders as needed. Answer incoming service phone calls. Maintain product knowledge as the Liaison between the Service Department and the customer. MARGINAL TASKS: Must be willing to do other miscellaneous tasks as required by and related to the business. SPECIAL REQUIREMENTS: • Must have good communication skills and the ability to interact well with customers, vendors and co-workers in a positive and constructive manner., • This is a safety-sensitive position for which impairment while on the job would present a substantial risk. As a condition of employment, the applicant must submit to pre-employment testing for marijuana. The position is exempt from the state law prohibiting preemployment testing for cannabis use. PHYSICAL REQUIREMENTS: Must be able to pass physical, including drug test. Must maintain a professional appearance. Involves essential ability to climb around, on and under trucks in order to properly inspect and diagnose all types of problems and repairs. Must be able to lift 50 pounds to the waist and 25 pounds to the shoulder. Want to know more about our family-owned company,Proud that our 1600+ employees view us as the employer of choice! YouTube- Service Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Job DescriptionWHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. Bruckner’s is more than just a place selling parts and working on trucks; we are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it. • We work on all makes and models!, • 40+ locations across 11 states, • 1,600 team members OUR CORE VALUES • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER, • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplaceJOB SUMMARY The technicians must be able to complete diagnosis of any mechanical, electrical, or other various failures/breakdowns of a truck or its related equipment. This position will also perform disassembly, repair, and reassembly of truck engines, transmissions, carrier assemblies, clutches, brakes, electrical systems, and any other truck or related equipment adjustment/repairs. ESSENTIAL POSITION FUNCTIONS AND PRINCIPAL ACCOUNTABILITIES • Trained to use all tools of trade, including precision instruments and technical shop machines and diagnostic tools., • Use previous and on the job training to read and understand technical publications, including on-line service software and service bulletins. He/she must be able to use information contained in them to do their own work and to assist others concerning the content., • He/She will learn to determine usability of all component parts and must be able to list and order all needed parts using the dealer management system., • Must be able to complete work accurately and timely as outlined in published time standards guidelines., • Must be able to write and/or type a good description of all work performed on each individual repair using the dealer management system., • Ability to perform all aspects of the job safely and in accordance with OSHA and Bruckner’s rules and regulations expressed and implied., • Understands the importance of attendance and punctuality and how it directly impacts customer service., • Is a good steward of company tools and resources., • Achieves and maintains certifications as required by the company, the OEM’s or by Federal Law. EXAMPLES OF SKILLS NEEDED TO MASTER THIS LEVEL • P.M. Services, • Steam Clean, • P.D.I. Inspections, • Used Truck Inspections, • Wheel Seals, • Brake Adjustments, • Clutch Adjustments, • Pinion Seals, • Foundation brake replacement (shoes, drums, & hardware), • Battery diagnoses & replacement, • U-joints, • Shocks, • Small make ready items (mudflaps,1/4 fenders, bug screens, bug shields, & bumpers) POSITION REQUIREMENTS Education & Experience:, • High School Diploma desired., • Must possess and use good interpersonal skills to interact well with customers, vendors, and co-workers in a positive and constructive manner., • Must be able to operate various computer diagnostic devices, laptops, and tablets. Physical Demands: • Involves essential ability to maneuver around, in, on and under trucks in order to properly inspect and diagnose all types of problems and repairs., • Must be able to pass a physical and drug and alcohol screens during pre-employment screening, randomly and/or as requested throughout employment., • Must be able to lift 50 pounds to the waist and 25 pounds to the shoulder. Want to know more about our family-owned company, Proud that our 1500+ employees view us as the employer of choice! YouTube- Service Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Job Description Mobile Service Technician POSITION DESCRIPTION: The Mobile Service Technician position will diagnose problems and perform identified repairs and routine preventive maintenance services on semi trucks under limited supervision through the use of their mobile service truck and tools. The mobile service truck, tools, and inventory must be maintained and kept in serviceable condition at all times as per company policy and procedures. HLA HIGH LEVERAGE ACTIVITIES (Focus actions that will return the highest impact): • Determines vehicle condition by conducting inspections and diagnostic test, identifying worn and damaged parts focusing on safety, quality, and customer up time., • Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, hydraulics; completes machine shop operations; making adjustments and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, oil systems, control linkages, clutches, and traction units., • Embrace training opportunities maintaining certification in OEM products KEY RESPONSIBILITIES AND PERFORMANCE MEASURES • Provide technical service to vehicles and equipment. Including trouble shooting, electrical and diagnostic services., • Read Repair Order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Perform general and detailed repair of all trucks, engines, and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Advise the Service Supervisor if additional repair work is necessary, • Tag all warranty parts and returns to warranty clerk., • Maintain a neat and orderly working area, and proper handling of company tools, • Follow safe work practices and procedures, uses safety equipment when required, responds to suggestions for working safely and seeks assistance when necessary., • Attend training classes and keep abreast of factory technical bulletins, • Other duties assigned by manager. QUALIFICATIONS AND EXPERIENCE • High school diploma or GED is required. Combination of education, training, or experience that provides the required knowledge, skills, and abilities will be considered., • Related technical school training preferred., • Three to five years of commercial truck technical service experience., • Engine certifications preferred: Cummins, Detroit, International, etc., • Necessary tools to perform job responsibilities, • Ability to work and learn independently., • Strong written/ verbal communication skills required., • Ability to use various windows-based computer software. Experience with engine software a plus, • Valid commercial drivers license preferred. PHYSICAL AND ENVIRONMENTAL CONDITIONS Duties are performed throughout the inside and outside of the building(s). Employee is exposed to dirt, dust, heat, cold, noise and vibration, fumes and odors, wetness, and humidity, and sometimes darkness. Employee is required to stand, walk, kneel, squat, crawl, bend, and twist. Employee may have to climb and/or lift up to and over 80 pounds frequently. Visual requirements are constant. Specific vision abilities required by this job include close vision and the ability to adjust focus. Due to the nature of the environment, employee is exposed to potential mechanical, chemical, electrical and fire hazards on a regular basis. NOTE: This Position Profile is not intended to be an all-inclusive. Employee may perform other related duties as required to meet the on-going needs of the company. The Position Profile is intended to describe the general nature and level of work being performed by individuals assigned to this job. It is not an exhaustive listing of all responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. Management reserves the right to revise the job or to require that other tasks be performed when circumstances change (e.g. emergencies, changes in personnel, workload, rush jobs or technological development.

Job Description gTANGIBLE Corporation (gTC), www.gtangible.com, is an S corporation and a registered Government contractor that provides services and solutions in: • National Security Programs, • Professional, Administrative, and Management Support, • Mission and Warfighter Support We are a Service-Disabled Veteran Owned Small Business (SDVOSB) and the founder has years of successful experience in the Government contracting arena. Our leadership team is an exceptional group of Government contracting professionals. gTANGIBLE is in the process of identifying candidates for the following position. Requisition Type: Contingent (Open) Position Status: Full Time Position Title: Network/System Administrator II Location: Albuquerque, NM Security Clearance Level: Top Secret/SCI, SAP Information eligible, consent for Counterintelligence polygraph Duties and Responsibilities The Air Force (AF) Special Access Program (SAP) Security Support Services (SSS) assists the AF cognizant security authority in oversight of enhanced National Security Objectives supporting AF SAP interests through active and integrated security operations, processes, mechanisms, and management. This support provides multi- disciplinary security support, including specialized analytical/program protection support, while being responsive and flexible to dynamic SAP security situations. The primary function will be to organize, install, and support government organization's computer systems, including local area networks (LANs), wide area networks (WANs), network segments, intranets, and other data communication systems. This will also include helping architect, design and analyze network models. It will require participation in decisions about buying future hardware or software to upgrade organization's infrastructure. This position might be called upon to provide technical support to computer users to help solve users' problems. This position will support activities within Special Access Programs (SAPs) supporting Department of Defense (DoD) agencies, such as HQ Air Force, Office of the Secretary of Defense (OSD) and Military Compartments efforts. The position will provide "day-to-day" support for Collateral, Sensitive Compartmented Information (SCI) and Special Access Program (SAP) activities. Duties include the following: • Ability to operate under minimal supervision., • Execute day to day management and operations of systems and networks., • Manage COTS & GOTS products to collect, display and remediate a variety of automated system security and system operations/performance functions and metrics., • Follow Operations and Maintenance (O&M) checklists to maintain the service (daily, weekly, monthly, yearly O&M checklists); build Tactics, Techniques and Processes (TTPs) and Standard Operating Processes (SOPs) associated with service checklists., • Operate monitoring tools/capabilities with the enterprise security information and event management (SIEM) and create/tailor complex event alarms/rules and summary reports., • Assist in analyzing technical risk, upon request, of emerging cybersecurity tools and processes., • Work as part of a security incident response team as needed., • Working technical competency in one or more of the following supported platforms: Microsoft Windows Server, Red Hat Enterprise Linux servers, MS Hyper-V/VMWare/ESx/Xen Hypervisors, Enterprise networking/firewalls/intrusion detection/prevention systems, forensic analysis/vulnerability assessment, Group Policy management and configuration, Scripting, BMC Footprints, WSUS, Lumension, Bitlocker, SQL Server 2012, TomCat, IIS, Windows Server 2012r2/2016, Win 10, Red Hat 6.5, Microsoft Office Toolkits, SEIMs, Logrhythm, ACAS/Nessus/SCAP, mandatory/role-based access control concepts (e.g. SE Linux extensions to RHEL, PitBull, AppArmor, and Sentris) , video teleconferencing/VOIP, Oracle/MS SQL database security, and Apache/IIS Web server security. Knowledge and Qualifications • Bachelor's degree in a related area and 3-5 years of related experience OR Associate's degree in a related area and 5-7 years of related experience OR 7-9 years of related experience without a degree., • Must meet position and certification requirements outlined in DoD Directive 8570.01-M for Information Assurance Technician Level II within 6 months of the date of hire., • Thorough knowledge of Microsoft Windows desktop and server operating systems, Microsoft Exchange Server, and as needed RHEL operating systems administration and associated hardware., • Working knowledge of CISCO network and switching and virtualization technologies., • Working knowledge of Local Area Network (LAN) and Wide Area Network (WAN) technologies and data backup technologies to include communication security (COMSEC) integration., • Must be familiar with DoD policy as it applies to implementing and executing system and network administration., • Working knowledge and current relevant experience with PL2 and PL3 network environments/systems., • Experience providing technical support in a customer service role., • Experience applying industry standards and best practices in an enterprise-level Windows system environment., • Experience solving technical problems quickly and identifying opportunities to automate repetitive processes., • Working knowledge of WSUS and/or YUM patch deployment methodologies., • Must be able to regularly lift up to 50 lbs., • SAP experience required., • Prior Air Force experience a plus. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.

Job Description Great Western Trailer (GWT) is immediately hiring full-time Tank Technicians to service semi-trailers at our Albuquerque, NM facility. As a Tank Technician, you will inspect, repair, and maintain tanks in accordance with Department of Transportation (DOT) and ASTM regulations. Be a part of our team – Apply now! What’s in it for you? Weekly Paychecks – Get paid on time, every time. Weekday Schedule – Monday-Friday, 8:00 AM – 4:30 PM (No weekends!). Comprehensive Benefits Package – Health, dental, vision, and life insurance. 401K, Flexible Spending & Health Savings Account options. Paid Time Off & Sick Leave – Enjoy work-life balance. Employee Perks – Discounts, Employee Assistance Program, and a $400 Benefit Card. Who We’re Looking For GWT is looking for hardworking individuals who are: Quick Learners – Willing to follow instructions, ask questions, and grow their skills. Team Players – Punctual, reliable, and respectful, with the ability to work independently. Focused & Detail-Oriented – Committed to accuracy, quality, and safety. Safety-Minded – Always adheres to company safety policies and procedures. Tank Technician Responsibilities Inspect, Service & Repair: Tanks and trailers to meet FHWA, FMCSA, DOT HM183, and hazmat standards. Pneumatic and hydraulic control systems, product pumps, and piping. Overfill systems (Scully, Civacon, Flotech, Titan Logix, Garnett). Air brake systems, valves, sensors, dome lids, shoes, drums, pads, and rotors. Low voltage wiring, harnesses, lights, batteries, and charging systems. Chassis, side-shells, caps, doors, retainers, fasteners, floors, and plates. Perform preventative maintenance and minor mechanical repairs. Troubleshoot electrical and lighting systems; perform sheet metal and paint work. Installation, Welding & Fabrication: Install add-on components (toolboxes, pumping systems, ladders, brackets). Perform aluminum and steel MIG/TIG welding, including in confined spaces. Fabricate hydraulic pump systems and perform wood/metal carpentry. Complete wreck repairs and custom fabrication. Obtain company weld test certification. Quality Checks & Reporting: Complete Mechanic’s Service Reports. Prepare FHWA and HM183 testing documentation. Maintain clean, organized workspaces and tools. Required Qualifications Minimum 3 years of experience working on or around tank vehicles or pressure vessels. (Candidates without this experience may be considered for Trailer Technician roles instead.) Ability to lift/move up to 50 lbs. Own a personal set of hand tools (except in California). Strong mechanical knowledge of tank and semi-trailer equipment. Ability to operate hand, power, pneumatic tools, and welding equipment safely. Strong troubleshooting skills and ability to follow service guidelines. Preferred Qualifications 3+ years of tank vehicle service experience. Registered Tank Inspector certification. Additional certifications such as Tank, ASE, or welding. Bilingual (Spanish) is a plus. Willingness to work overtime as needed. Physical Demands & Work Environment Frequent standing, walking, kneeling, and lifting (up to 50 lbs.). Use of hands and arms for handling tools and materials. Work in confined spaces and at heights. Exposure to mechanical parts, chemicals, fumes, and varying temperatures. Moderate to loud noise levels; potential risk of electrical shock. Work may be performed in a shop, yard, or mobile service vehicle. About Great Western Trailer Great Western Trailer (GWT) is a growing Semi-Trailer Sales, Leasing, Rental, and Service company with 10 locations across 8 states. We operate in Fontana, CA; Albuquerque, NM; Phoenix, AZ; Grants Pass, OR; Dallas, TX; Houston, TX; Dearborn, MI; Salt Lake City, UT; Oklahoma City, OK; and Tulsa, OK—and we’re expanding! Apply Today! If you're passionate about tank trailer repair and want to grow with a company that values your skills, apply now and join our team in Albuquerque, NM! This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice.

Job Description Great Western Trailer (GWT) is actively hiring skilled and motivated Trailer Technicians to join our growing team at our Albuquerque, NM facility. If you have experience in semi-trailer maintenance and repair and are looking for a company that values your skills and dedication, we encourage you to apply today. Be a part of our team – Apply now! What’s in it for you? • Weekly Paychecks – Get paid on time, every time., • Weekday Schedule – Monday-Friday, 8:00 AM – 4:30 PM (No weekends!)., • Comprehensive Benefits Package – Health, dental, vision, and life insurance., • 401K, Flexible Spending & Health Savings Account options., • Paid Time Off & Sick Leave – Enjoy work-life balance., • Employee Perks – Discounts, Employee Assistance Program, and a $400 Benefit Card. Who We’re Looking For GWT is looking for dedicated individuals who are: • Quick Learners – Willing to follow instructions, ask questions, and grow their skills., • Team Players – Punctual, reliable, and able to work independently or collaboratively., • Detail-Oriented – Focused on quality, accuracy, and safety. Trailer Technician Responsibilities • Inspect and repair semi-trailers, including brakes, wiring, bodywork, lift gates, and more., • Install and replace add-on components such as toolboxes, winches, and ramp kits., • Perform fabrication and welding as needed., • Complete service reports and ensure all work meets quality and safety standards. Required Qualifications • Reliable transportation to and from work., • Own a personal set of hand tools (except in California)., • Strong mechanical aptitude and experience with semi-trailer equipment and maintenance., • Ability to operate hand tools, power tools, and pneumatic tools safely and efficiently., • Willingness to work overtime when needed. Preferred Qualifications • Valid driver’s license (a plus, but not required)., • 3+ years of experience in semi-trailer repairs., • Certified brake and FHWA inspector or ability to obtain certification., • Industry certifications such as ASE or welding certification., • Bilingual (Spanish) is a valuable asset. Physical Demands & Work Environment • Frequent standing, walking, kneeling, and lifting (up to 50 lbs.)., • Work may be performed in a shop, yard, or mobile service environment., • Exposure to mechanical parts, chemicals, fumes, and varying temperatures., • Moderate to loud noise levels. About Great Western Trailer Great Western Trailer (GWT) is a fast-growing Semi-Trailer Sales, Leasing, Rental, and Service company with 10 locations across 8 states—and more expansions coming soon! We operate in Fontana, CA; Albuquerque, NM; Phoenix, AZ; Grants Pass, OR; Dallas, TX; Houston, TX; Dearborn, MI; Salt Lake City, UT; Oklahoma City, OK; and Tulsa, OK. Apply Today! If you have the skills and passion for semi-trailer repair, we want to hear from you. Join a company that values your hard work and offers opportunities for career advancement. Apply now and take your career to the next level with Great Western Trailer in Albuquerque, NM! This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice.

Job DescriptionWHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. Bruckner’s is more than just a place selling parts and working on trucks; we are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it. • We work on all makes and models!, • 40+ locations across 11 states, • 1,600 team members OUR CORE VALUES • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplace JOB SUMMARY The technicians in Tier 2 will have mastered the skills trained in the Tier 3 job specifications. In addition, a Tier 2 technician will have achieved various levels of on-line training and approved off site training and specified below. A technician will not be considered for Tier 2 advancement until they have a minimal of two years on the job training. ESSENTIAL POSITION FUNCTIONS AND PRINCIPAL ACCOUNTABILITIES REQUIRED IN ADDITION TO THOSE STATED IN THE TIER 3 DESCRIPTION • Completed online portion training in Mack & Volvo in our Dual branded locations and single brand in those single branded locations. This requirement may also be met using Cummins Training, Medium Duty Training, & or Allison training., • Actively working on approved off-site training prerequisites and or attending off-site training towards a certification in the agreed upon training path., • Working knowledge and can demonstrate systems knowledge of: (Air System, Fuel Systems, After treatment systems etc.) EXAMPLES OF SKILLS NEEDED TO MASTER THIS LEVEL • Performs timely repairs, minimum 85% efficiency and 80% Proficiency., • Performs quality repairs should have minimal rework based on value, frequency, and managerial discretion., • Able to perform moderately difficult diagnostics but may struggle with more difficult situations., • Can diagnose and repair basic electronic, lighting, and electrical systems., • Requires minimal supervision., • A forward-thinking and creative individual with high ethical standards and an appropriate professional image., • Has a can-do attitude and is considered a "Go to" in at least two areas of repair?, • Displays a firm understanding of the big picture and the mission at hand. PROGRESSION REQUIREMENT • Complete all Tier 3 Job Role Requirements., • Must complete a Minimum of 2 items listed below., • Complete in 3 areas of the ASE “Medium/Heavy Duty Truck Certifications”, • Master Certified in at least 1 Mack or Volvo Pro-Path Segments., • D.O.T. Inspection Certified., • Certified in at Least one Cummins engine platforms., • Certified in a Medium Duty (Hino, Mitsubishi, or Isuzu), • Allison Transmission Certified (one), • Have valid Commercial Driver’s License. Physical Demands: • Involves essential ability to maneuver around, in, on and under trucks in order to properly inspect and diagnose all types of problems and repairs., • Must be able to pass a physical and drug and alcohol screens during pre-employment screening, randomly and/or as requested throughout employment., • Must be able to lift 50 pounds to the waist and 25 pounds to the shoulder. Want to know more about our family-owned company, Proud that our 1600+ employees view us as the employer of choice! YouTube- Service Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Job Description Overview Ansible Government Solutions, LLC (Ansible) is currently recruiting Histology Technicians to support the Raymond G. Murphy VA Medical Center located at 1501 San Pedro Dr. SE, Albuquerque, NM 87108. Services will be delivered to all requesting departments throughout the facility. Exceptional compensation packages with full benefits are available. Ansible Government Solutions, LLC (Ansible) is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Responsibilities • Process tissues either manually or mechanically through fixation, dehydration and infiltration, • Embed tissues, cuts and do routine staining, • Perform specials stains and special immunoperoxidase procedures when necessary, • Fill in when necessary for the Autopsy Assistant for disposal of hazardous chemical waste and surgical material, • Assist with the processing of cytology specimens, • Perform other duties as assigned relating to the responsibilities of a Histology Technician Qualifications • An Associate degree from an accredited educational institution, • ASCP professional certification or equivalent Nationally-recognized Histology Technician certification or categorical certification in histopathology, • A minimum of one (1) year of experience within the last three (3) years - PREFERRED All candidates must be able to: • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance, • Push/pull with 30 lbs of force All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Powered by JazzHR PXdtvsv8Ze

Job Description The Body Shop Technician is able to repair vehicle bodies and straighten vehicle frames both steel and aluminum repair as well as fiber glass repairs; correcting vehicle deficiencies; making adjustments and alignments in the Body Shop Department of a retail dealership environment. HLAs HIGH LEVERAGE ACTIVITIES (focus actions that will return the highest impact): · Determines vehicle condition by conducting inspections and diagnostic test; identifying worn and damaged parts focusing on safety, quality and customer up time. · Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering and frame components . • Corrects Non-structural damage, Structural damage., • Proficient in Welding and cutting, Plastic repair, Fiber glass repair, Minor mechanical and Electrical repair. KEY RESPONSIBILITIES AND PERFORMANCE MEASURES: · Works with body shop management to develop and achieve challenging individual goals for production and quality work. · Completes repair assignments correctly to pass quality inspections, preparation standards for painting department, and per agreed upon estimate. · Collects all necessary information before requesting additional parts. · Meets or exceeds productivity goals and objectives. · Notifies manager or estimator promptly when undiscovered damage or other delays occur. · Promotes a productive working relationship with others. · Provides clear and legible record of service completed or additional repairs needed for both customer and dealership use. · Assists estimators and service advisors as necessary to explain repairs to customers or determine estimates. · Assists other technicians when requested. · Prioritizes work to meet demands and customer needs; plans ahead to complete work in allotted time frames. · Makes decisions regarding repair options; asks for assistance if necessary. · Completes repair orders within specified time frame, foresees delays, and alerts appropriate personnel promptly. · Performs preventive maintenance, cleaning, and repairs on dealership tools and equipment; ensures facility is always clean and organized. · Performs factory warranty repairs according to established procedures. · Follows all hazardous waste and OSHA safety regulations and company policies. · Stays up to date on the latest technical services through training, vendors, etc. · Properly disposes of used parts and returns unused parts to the counterperson. · Uses manuals including diagrams as necessary to complete repairs. · Other duties as assigned. QUALIFICATIONS AND EXPERIENCE: · High school diploma or GED is required. Combination of education, training, or experience that provides the required knowledge, skills, and abilities will be considered. · Related technical school training preferred. · Minimum of two years experience (four or more preferred). · ICAR certification preferred, not necessary. · ASE certification preferred, not necessary. · Necessary tools to perform job responsibilities. · Ability to work and learn independently. · Strong written/ verbal communication skills required. · Ability to use various Windows based computer software. · Valid commercial drivers license preferred, not necessary. PHYSICAL AND ENVIRONMENTAL CONDITIONS: Duties are performed throughout the inside and outside of the building(s). Employee is exposed to dirt, dust, heat, cold, noise and vibration, fumes and odors, wetness and humidity, and sometimes darkness. Employee is required to stand, walk, kneel, squat, crawl, bend, and twist. Employee may have to climb and/or lift up to and over 80 pounds frequently. Visual requirements are constant. Specific vision abilities required by this job include close vision and the ability to adjust focus. Due to the nature of the environment, employee is exposed to potential mechanical, chemical, electrical and fire hazards on a regular basis. NOTE: This Position Profile is not intended to be an all-inclusive. Employee may perform other related duties as required to meet the on-going needs of the company. The Position Profile is intended to describe the general nature and level of work being performed by individuals assigned to this job. It is not an exhaustive listing of all responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. Management reserves the right to revise the job or to require that other tasks be performed when circumstances change (e.g. emergencies, changes in personnel, workload, rush jobs or technological development.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access to space. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions TECHNICIAN I-III, OPS SUPPORT - EQUIPMENT MAINTENANCE (EES) Based at Rocket Lab's site in Albuquerque, New Mexico the Technician I-III, Ops Support - Equipment Maintenance (EES) is responsible for the maintenance, upkeep and troubleshooting of assigned semiconductor and composites manufacturing equipment to ensure that the equipment is running safely and efficiently to meet production objectives. You will support the Operations Manager and operations organization, with deliverables required for internal leadership, board of directors, and investors. (Please note: this position can be hired at the Ops. Support Technician I, Ops. Support Technician II, Ops. Support Technician III level) WHAT YOU'LL GET TO DO: • Service, maintain and troubleshoot equipment and manufacturing tools related to the function and operation of an aerospace composites and semiconductor plant and facility including gasses, chemicals, compressed air, water and waste streams., • Troubleshoot and repair of manufacturing and support equipment and systems., • Works with engineers and managers to resolve issues or plan for acquiring/installing new equipment or systems., • Locate and order parts and materials., • Assumes leadership role in training and support of new technicians., • Maintain facility data collection requirements and procedures., • Identifies nonconformance when they occur and participates in finding the solution to the non-conformance., • Deploys the Quality Management System as it applies to the scope of work., • Supports Facilities shut down and projects off shift as scheduled by department management., • Serve as member of Emergency Response Team. YOU'LL BRING THESE QUALIFICATIONS AS A TECHNICIAN I, OPS. SUPPORT: • Experience troubleshooting, repairing and performing maintenance on semiconductor and solar photovoltaic manufacturing equipment., • Experience with installing and relocating semiconductor and manufacturing equipment, • Pneumatic, hydraulic, mechanical and electrical experience, • High school diploma or GED, • Experience using a respirator YOU'LL BRING THESE QUALIFICATIONS AS A TECHNICIAN II, OPS. SUPPORT: • 2+ years of experience troubleshooting, repairing and performing maintenance on semiconductor and solar photovoltaic manufacturing equipment., • Experience with installing and relocating semiconductor and manufacturing equipment, • Pneumatic, hydraulic, mechanical and electrical experience, • High school diploma, • Experience using a respirator YOU'LL BRING THESE QUALIFICATIONS AS A TECHNICIAN III, OPS. SUPPORT: • 5+ years of experience troubleshooting, repairing and performing maintenance on semiconductor and solar photovoltaic manufacturing equipment., • Experience with installing and relocating semiconductor and manufacturing equipment, • Pneumatic, hydraulic, mechanical and electrical experience, • High school diploma, • Experience using a respirator ADDITIONAL REQUIREMENTS: • Stand and walk for entire shift (8+ hours) on various work surfaces, • Climb ladders and work at elevated height small spaces, awkward positions, and tight areas as needed, • Perform repetitive motions including bending, twisting, reaching, grasping, pushing, pulling, and stooping, • Use hands with precision to handle, control, and operate tools, instruments, and equipment, • Lift, carry, push, and pull materials and equipment up to 25 lbs., • Work in varied environments including production floors, equipment areas, and field locations with exposure to noise, temperature variations, and moving machinery, • Flexibility to work extended hours, weekends, and varied shifts as operational needs require WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access to space. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions EQUIPMENT ENGINEER, LEAD Based out of Rocket Lab's site in Albuquerque, New Mexico, the Equipment Engineer, Lead will take ownership of coordinating with Facilities and Equipment Services to create installation project summaries and operational work instructions for all assigned new equipment. Join a driven team of pioneers relentlessly tackling challenging projects, delivering on the impossible, and making an impact on the future of space! WHAT YOU'LL GET TO DO: • Equipment engineers are responsible for the full lifecycle of machinery and equipment, including design, installation, maintenance, and performance optimization, • Design and develop equipment systems and components tailored to industrial or manufacturing requirements, • Prepare detailed technical specifications, engineering drawings, and schematics for manufacturing and assembly, • Oversee the installation, testing, and commissioning of equipment to ensure proper functionality, • Troubleshoot and resolve technical issues, implement corrective actions, and perform preventive maintenance, • Collaborate with cross-functional teams, including operations, maintenance, and vendors, to ensure equipment meets safety and performance standards., • Monitor equipment performance, conduct evaluations, and implement upgrades to optimize efficiency, • Create technician training documents for SOP's YOU'LL BRING THESE QUALIFICATIONS AS AN EQUIPMENT ENGINEER, LEAD: • Bachelor's degree, • 5+ years of experience in the semiconductor industry, • 5+ years of experience in a production or other highly regulated manufacturing environment, • 5+ years of experience in facilities and equipment engineering THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Takes initiative and works independently, • Remains calm under pressure and communicates effectively, • Demonstrated success in planning, directing, and implementing complex projects on time, within budget, and with desired functionality, • Ability to maintain a broad focus while paying attention to detail and managing multiple tasks simultaneously, • Proven ability to work effectively with all levels of the organization, including staff, business stakeholders, and management, • Strong written and verbal communication skills, including the ability to present to an executive audience, • Excellent conflict resolution, negotiation, and influencing skills, • Ability to thrive in fast-paced, dynamic, and ambiguous environments, • Proven experience with project management methodologies, • Highly organized and detail oriented ADDITIONAL REQUIREMENTS: • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus, • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing, • Must be physically able to commute to buildings, • Occasional exposure to dust, fumes and moderate levels of noise WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionCome make your mark with Watermark!🎖️ FOUNDED BY USAF VETERANS in 2007, we are proud to be a Service-Disabled Veteran Owned Small Business. 🌎 SUBJECT MATTER EXPERTS specializing in security and risk management. We’re intimately familiar with DOD security programs and mission requirements. ⭐ OUR CORE VALUES drive every action we take as a company. We strive to exhibit PERSPECTIVE, PASSION, COMMUNICATION, INTEGRITY AND ETHICS, and BALANCE in all we do. 💲 COMPETITIVE BENEFITS PACKAGE to address our employees’ physical, mental, emotional, and financial well-being. This includes 100% employer- paid medical insurance, ample paid leave, a free employee assistance program, and a competitive 401k savings plan. At Watermark, our people come first! Network/Systems Administrator II The primary function will be to organize, install, and support government organization’s computer systems, including local area networks (LANs), wide area networks (WANs), network segments, intranets, and other data communication systems. This will also include helping architect, design and analyze network models. It will require participation in decisions about buying future hardware or software to upgrade organization’s infrastructure. This position might be called upon to provide technical support to computer users to help solve users’ problems. This position will support activities within Special Access Programs (SAPs) supporting Department of Defense (DoD) agencies, such as HQ Air Force, Office of the Secretary of Defense (OSD) and Military Compartments efforts. The position will provide “day-to-day” support for Collateral, Sensitive Compartmented Information (SCI) and Special Access Program (SAP) activities.In this role you will…. • Lead IT ops team on day-to-day management and operations of Networks and implement capabilities vetted through Cybersecurity, ISSE and higher headquarters to maintain JSIG/RMF Authority to Operate and maintain Continuous Monitoring tools and processes, • Manage COTS & GOTS products to collect, display and remediate a variety of automated system security and system operations/performance functions and metrics., • Assist during security assessments of servers/network devices/security appliances, • Assist during security assessments with regard to accuracy and efficiency, • Assist with Creation of operational Operations and Maintenance (O&M) checklists to maintain the service (daily, weekly, monthly, yearly O&M checklists); build Tactics, Techniques and Processes (TTPs) and Standard Operating Processes (SOPs) associated with service checklists, • Manage and operate monitoring tools/capabilities with the enterprise security information and event management (SIEM) and create/tailor complex event alarms/rules and summary reports, • Execute cybersecurity operations procedures for day to day network management, operations and maintenance, • Monitor/analyze output of cybersecurity related tools for reportable security incidents and residual risk, • Assist in analyzing technical risk, upon request, of emerging cybersecurity tools and processes, • Work as part of a security incident response team as needed, • Assist ISSM/ISSO/ISSE with the Integration/Development new techniques to improve Confidentiality, Integrity, and Availability for networks/systems operating at various classification levels, • Advanced technical competency in one or more of the following supported platforms: Microsoft Windows Server, Active Directory Red Hat Enterprise Linux servers, MS Hyper- V/VMWare/ESx/Xen Hypervisors, Enterprise networking/firewalls/intrusion detection/prevention systems, forensic analysis/vulnerability assessment, Group Policy management and configuration, Scripting, BMC Footprints, WSUS, , Lumension, Bitlocker, SQL Server 2012, TomCat, IIS, Windows Server 2012r2/2016, Win 10, Red Hat 6.5, Microsoft Office, • Toolkits, SEIMs, Logrhythm, ACAS/Nessus/SCAP, mandatory/role-based access control concepts (e.g. SE Linux extensions to RHEL, PitBull, AppArmor, and Sentris), video teleconferencing/VOIP,Oracle/MS SQL database security, and Apache/IIS Web server security, • Additional duties as assignedExperience Requirements:, • 3-5 years related experienceEducation Requirements:, • Bachelor’s degree in a related area OR Associate’s degree in a related area + 2 years’ experience OR equivalent experience (4 years)Certification Requirements:, • Must meet position and certification requirements outlined in DoD Directive 8570.01-M Information Assurance Technician Level 2 within 6 months of the date of hire, • Prefer an IAT Level III certification (i.e. CASP, CISSP, etc).Security Clearance Requirements:, • Top Secret Clearance with SCI Eligibility, • Eligibility for access to Special Access Program Information, • Willingness to submit to a Counterintelligence polygraphOther Requirements:, • Thorough knowledge of Microsoft Windows desktop and server operating systems, Microsoft Exchange Server, and as needed RHEL operating systems administration and associated hardware, • Experience in effective communication and collaborating in a high performance team environment., • Group Policy design and configuration, • Working knowledge of CISCO network and switching and virtualization technologies, • Working knowledge of virtualization as it applies to users environments, operating systems, and network appliances, • Working knowledge of Local Area Network (LAN) and Wide Area Network (WAN) technologies and data backup technologies, • Working knowledge communication security (COMSEC) policies and integration, • Working knowledge of Risk Management Framework, Common Criteria, and System Security Policy as they relate to assessments and authorization, • Working knowledge and current relevant experience with PL2, PL3, and PL4 network environments/systems, • Working knowledge of WSUS and/or YUM patch deployment methodologies, • Must be familiar with DoD policy as it applies to implementing and executing system and network administration, • Working knowledge of Risk Management Framework and how to apply it to network/information system environments, • Must be able to regularly lift up to 50 lbs., • May require sedentary work at least 50% of the time, • Reports to a physical location which occasionally requires the ability to traverse between buildings, • Ability to manage stress with a high degree of maturity/professionalism, • Demonstrated critical thinking and leadership skills and the ability to work well with others, • Effective verbal and written communication skills, • All Level I & Level II positions - candidate should possess some Special Access Program (SAP) experience, • All Level III positions -candidate should possess 2+ years of Special Access Program (SAP) experience Watermark provides salary ranges with job postings in states where it is legally required; any other salary ranges associated with our postings are third party estimates and may not be an accurate reflection of Watermark’s total compensation package. Multiple considerations are taken into account when determining the final salary/hourly rate, including but not limited to, Contract Wage Determination, education and certifications, relevant work experience, related skills and competencies, as well as Federal Government Contract Labor Categories. Central to Watermark’s employment philosophy is the wellbeing of our employees which is why we offer a robust benefits package and wellness program alongside of annual base compensation. Watermark is an equal opportunity employer. All terms and conditions of employment are established without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, veteran status, or any other protected category under applicable federal, state, and local laws. Powered by JazzHR tes5bTxtiI

Job Description ABOUT VEG In 2014, VEG was born with a mission to help people and their pets when they need it most. This meant challenging the status quo and fixing everything that was wrong with the ER experience. Since then, we've expanded rapidly, with hospitals nationwide open 24/7, 365 days a year, and created a better emergency experience—not only for people and their pets, but also for everyone who works here—our VEGgies! At VEG we find a way to say yes to the career you want in veterinary emergency medicine. This means transforming how ER works, from our open-concept hospitals, where you can handle emergency cases of every kind (even exotics!) to our immersive, customer-focused experience, which helps us give people and their pets the care they deserve. This also means saying yes to creating the greatest experience possible for our VEGgies. Yes to working in an environment where you can find your place and feel valued for the amazing work you do. Yes to having unparalleled opportunities for learning and mentorship so you can grow where you want to go in your career. And yes to making an impact here in ways you never thought possible. VEG is a 2025 and 2026 certified Great Place to Work®. THE JOB Being a Nursing Manager means doing more than simply leading a veterinary nursing team. It means building a culture where people are empowered, connected, and proud of the work they do. Through your compassion, collaboration, and a deep investment in your people, you'll play a vital role in shaping what emergency nursing leadership should look like. You'll be the bridge between process and purpose—ensuring exceptional patient care while creating an environment where VEGgies grow, thrive, and brag about where they work. This isn't your typical leadership role. It's your opportunity to transform the emergency experience for your team, our customers, and yourself. WHAT YOU'LL DO • Manage day-to-day flow for nursing team, ensuring they have the tools and support they need to shine, • Oversee scheduling, payroll, productivity, hiring, onboarding and offboarding, • Address patient care issues and team dynamics with empathy and clarity, • Partner with fellow hospital leadership and shift leads to align on goals and hospital flow, • Use doctor feedback to guide team development and maintain medical excellence, • Lead with VEG values—especially openness, togetherness, and heroic helping, • Champion a culture of learning with in-house training, mentorship, and development pathways, • Ensure licensure, performance standards, and education programs are upheld across the team, • Drive meaningful 1:1s, check-ins, and student mentorship that fuel long-term career growth WHAT YOU NEED • Credentialed as a Veterinary Technician (CVT, RVT, LVT, LVMT) in the state the VEG practice is located is required; A.S. or B.S. from an AVMA-accredited veterinary technology program is strongly preferred, • 5+ years in a clinical veterinary nursing role, emergency-specific experience preferred; 2+ years of leadership experience, • Excellent communication and people skills, • Must be willing to work in a noisy environment with strong or unpleasant odors, • Availability to work nights, weekends, and holidays on a rotating or as needed basis based on hospital needs, • Work well in a fast-paced environment with people from all backgrounds and different personality types WHO YOU ARE • Empathetic, instinctively taking a people-centric approach, whether supporting your colleagues or making an effort to understand different perspectives, • Have a sense of humility; acknowledging mistakes, sharing credit with others, and lifting up your team's' accomplishments, • Feel a strong sense of ownership over your work, taking responsibility for outcomes and staying committed to achieving long-term, impactful results, • Curious by nature; you ask insightful questions and continuously seek out opportunities to learn and grow your skills and knowledge HOW WE INVEST IN YOU • Competitive compensation, including base and 401K match, • Comprehensive health and wellness benefits, including medical, dental, and vision coverage, QPR training, and access to free therapy or counseling, • Depending on your role, you may be eligible for equity after one year of full time, active employment with VEG, so you can share in our growth and success, • A BIG focus on learning and growth, from VEG-created clinical and leadership programs to unlimited ER CE + travel stipend (no really!). Full-time credentialed VEGgies receive a $2,500/year travel stipend. Full-time uncredentialed VEGgies receive a $1,000/year travel stipend., • Clinical student loan repayment so you don't need to worry about your student debt, • Paid parental leave; up to 12 weeks at 100% of regular salary and inclusive fertility and family-building care for all types of families, • Flexible work schedules to support your life outside of work, • Generous referral reward program, so our awesome people can bring in more awesome people, • And the little (big) things, like comfy scrubs, cool VEG swag, and food in the fridge for when you're hungry DEI At VEG, diversity is not just a word—it's a strength that fuels innovation and kindness. Our mission is "Helping people and their pets when they need it most." And we do that better when our VEGgies (employees) feel valued, respected, and empowered to bring their authentic selves to work. That's why we're devoted to creating an environment that reflects the diverse communities we serve—where different perspectives are not only welcomed but celebrated. We are focused on providing equitable opportunities for growth, promoting inclusive decision-making, and ensuring that everyone's perspective is considered. Saying yes to VEG means helping us build a culture where your unique experiences and background contribute to a shared vision: being the world's veterinary emergency company.

Job Description $25–$40/hr, a service truck, full benefits, and a back office that handles the paperwork so you stay on the equipment. ICS is building out Albuquerque and Central New Mexico, and we want experienced technicians to anchor it. ICS (Interior Climate Solutions) is one of the largest, fastest-growing independent commercial service providers in the country, keeping HVAC/R running for multi-site retail, convenience-store, and commercial chains nationwide. Our techs are backed by a centralized team, dispatch, purchasing, quoting, and billing, so you focus on the work and the customer, not the admin. As a Service Technician, you'll do high-quality commercial HVAC/R service while helping develop and support the techs around you as the market grows. WHAT YOU'LL EARN • $25–$40/hr, based on experience, • Medical, Dental, and Vision insurance, • Life insurance, Retirement, and Paid Time Off, • Year-round work with established multi-site customers WHAT YOU'LL DO • Service, troubleshoot, and repair commercial HVAC/R — refrigeration, walk-in coolers/freezers, ice machines, RTUs, and split systems • Support multi-site retail and convenience-store accounts across Albuquerque and Central New Mexico • Lead by example on safety, quality, communication, and customer service, • Help train, mentor, and develop field technicians as we build the local team, • Communicate professionally with customers, dispatch, and management, • Keep accurate service records and job documentation, • Support on-call / emergency service needs as required WHAT YOU BRING • Strong commercial HVAC/R service experience, • Hands-on with refrigeration, walk-in coolers/freezers, ice machines, RTUs, and split systems • EPA certification (required), • Valid driver's license and clean driving record, • Sound independent field judgment, • Willingness to take part in an on-call rotation NICE TO HAVE (not required) • Prior lead technician, field supervisor, or mentoring experience, • Multi-site retail / convenience-store account experience WHY ICS • Centralized dispatch, purchasing, quoting, and billing, less paperwork, more billable work • National company resources with the chance to grow a market that's yours, • A clear path into leadership as the team grows under you Ready to lead and build a commercial HVAC/R team across Albuquerque and Central New Mexico, with a national company behind you? Apply today, we review applications daily. Company DescriptionInterior Climate Solutions (ICS) is one of the largest independent commercial HVAC/R and facility service providers in the country, delivering national coverage to multi-site retail, convenience-store, and commercial customers. Our field teams are backed by centralized dispatch, purchasing, quoting, and billing — so technicians focus on the equipment and the customer while we handle the rest. We're growing fast and building local service teams in markets across the U.S., with real opportunities to step into leadership.Interior Climate Solutions (ICS) is one of the largest independent commercial HVAC/R and facility service providers in the country, delivering national coverage to multi-site retail, convenience-store, and commercial customers. Our field teams are backed by centralized dispatch, purchasing, quoting, and billing — so technicians focus on the equipment and the customer while we handle the rest. We're growing fast and building local service teams in markets across the U.S., with real opportunities to step into leadership.

Job Description ABOUT VEG In 2014, VEG was born with a mission to help people and their pets when they need it most. This meant challenging the status quo and fixing everything that was wrong with the ER experience. Since then, we've expanded rapidly, with hospitals nationwide open 24/7, 365 days a year, and created a better emergency experience—not only for people and their pets, but also for everyone who works here—our VEGgies! At VEG we find a way to say yes to the career you want in veterinary emergency medicine. This means transforming how ER works, from our open-concept hospitals, where you can handle emergency cases of every kind (even exotics!) to our immersive, customer-focused experience, which helps us give people and their pets the care they deserve. This also means saying yes to creating the greatest experience possible for our VEGgies. Yes to working in an environment where you can find your place and feel valued for the amazing work you do. Yes to having unparalleled opportunities for learning and mentorship so you can grow where you want to go in your career. And yes to making an impact here in ways you never thought possible. VEG is a 2025 and 2026 certified Great Place to Work®. THE JOB As an Emergency Credentialed Veterinary Technician, you're part of a team that thrives on the front lines of emergency veterinary care where every second counts. You'll handle a wide range of cases, from minor to complex emergencies, collaborating with our doctors and team in delivering gold standard, emotionally intelligent care. You'll jump into triage, treatments, diagnostics, anesthesia, monitoring, and critical care nursing, all while being a steady, compassionate presence for pet parents in their most stressful moments. This role is for someone who wants to do the work they were trained to do (and more), continue growing their skills, and help people and their pets when they need it most. WHAT YOU'LL DO • Treat every patient and person like they matter—because they do! You keep people and pets together and stay by their side through tests, treatments, and everything in between, • Jump into action, delivering nursing care, treatments, and emotional support in the most critical moments, from triage to discharge, • Bring the meds, the monitoring, and the mastery—from IVs and CRIs to blood transfusions and beyond, • Communicate like a teammate and think like a leader, helping shape plans and keep care flowing, • Be ready to perform CPR like the trained RECOVER rockstar you are (not only do we offer training, we have the highest number of RECOVER CPR professionals and instructors in the industry!), • All the techy stuff—from diagnostics and imaging to sample collection and placing tubes, • Anesthesia, even for our most fragile patients? You've got it., • Use all the advanced techniques in your toolkit: central lines, endoscopy, ultrasounds, and more WHAT YOU NEED • High school diploma or equivalent required; associate's degree or higher in veterinary technology from an AVMA accredited program strongly preferred, • Credentialed as a Veterinary Technician (CVT, RVT, LVT, LVMT) in the state the VEG practice is located is required; VTS in ECC, internal medicine or anesthesia/analgesia is a plus and will lead to extra considerations in compensation, • 1+ years of experience in a veterinary technician role; experience in emergency or specialty medicine preferred, • Basic computer skills and a comprehension of practice management software and electronic medical record keeping, • Excellent communicator and calm under pressure; ready to lend a hand to support those around you, • Fine motor skills for handling patients and medical equipment, • Ability to stand for prolonged hours, kneel, and work on the floor as well as ability to lift up to 25 kg on own and able to support up to 40 kg with assistance, • Must be willing to work in a noisy environment with strong or unpleasant odors., • Availability to work nights, weekends, and holidays on a rotating or as needed basis based on hospital needs, • Work well in a fast-paced environment with people from all backgrounds and different personality types WHO YOU ARE • Empathetic, instinctively taking a people-centric approach, whether supporting your colleagues or making an effort to understand different perspectives, • Have a sense of humility; acknowledging mistakes, sharing credit with others, and lifting up your team's' accomplishments, • Feel a strong sense of ownership over your work, taking responsibility for outcomes and staying committed to achieving long-term, impactful results, • Curious by nature; you ask insightful questions and continuously seek out opportunities to learn and grow your skills and knowledge HOW WE INVEST IN YOU • Competitive compensation, including base and 401K match, • Comprehensive health and wellness benefits that start on day one, including QPR training and access to free therapy or counseling, • Based on your role, you may be eligible for equity after one year of full time, active employment with VEG, so you can share in our growth and success, • A BIG focus on learning and growth, from VEG-created clinical and leadership programs to unlimited ER CE + travel stipend (no really!). Full-time credentialed VEGgies receive a $2,500/year travel stipend. Full-time uncredentialed VEGgies receive a $1,000/year travel stipend., • Clinical student loan repayment so you don't need to worry about your student debt, • Paid parental leave, up to 12 weeks at 100% of regular salary and inclusive fertility and family-building care for all types of families, • Flexible work schedules to support your life outside of work, • Generous employee referral program, so our awesome people can bring in more awesome people, • And the little (big) things, like comfy scrubs, cool VEG swag, and food in the fridge for when you're hungry DEI At VEG, diversity is not just a word—it's a strength that fuels innovation and kindness. Our mission is "Helping people and their pets when they need it most." And we do that better when our VEGgies (employees) feel valued, respected, and empowered to bring their authentic selves to work. That's why we're devoted to creating an environment that reflects the diverse communities we serve—where different perspectives are not only welcomed but celebrated. We are focused on providing equitable opportunities for growth, promoting inclusive decision-making, and ensuring that everyone's perspective is considered. Saying yes to VEG means helping us build a culture where your unique experiences and background contribute to a shared vision: being the world's veterinary emergency company.

Job Description Job Title: Auto and/or Light Duty Diesel Technician Location: Albuquerque, NM, USA Employment Type: Full-Time Company: By The Book Diesel & Auto Repair About Us: The best auto and diesel repair company in town is hiring. We are looking for a solid, reliable and honest technician. We offer a family friendly environment, so you must be mature and looking to grow in your career as a technician. We run a very organized operation. We don’t like chaos because it costs us and our techs money. We strive to make everything as efficient as possible. If you win, we win. If you’re looking to upgrade your career, then give us a call. We are family owned and operated locally. Our benefits are awesome! We offer training, 401k retirement plan, vacation days, profit sharing, new equipment and your own computer. Please reply with resume or call with questions if you don’t have a resume. Looking for experienced techs. Please no entry level technicians. Lots of hours available! Why Work With Us: State-of-the-Art Facility: Work in a modern, fully equipped climate-controlled shop with bright lighting and the latest equipment Great Benefits: 401K retirement plan, and paid time off, holiday pay and profit sharing Professional Development: We invest in your growth and continuous learning. Community-Oriented: Join a team that values community and camaraderie. Job Description: We are seeking a skilled and detail-oriented Auto and/ or Light Duty Diesel Technician to join our team. In this role, you will be responsible for diagnosing, repairing, and maintaining gas and diesel engines and vehicles. You will work on a variety of tasks, including but not limited to engine diagnostics, brake systems, fuel systems, and preventative maintenance. The ideal candidate is passionate about diesel technology, has strong problem-solving skills, and is dedicated to providing top-notch service to our customers. Responsibilities: Diagnose and repair auto and/or light duty diesel engines and systems Perform routine maintenance and inspections Troubleshoot and resolve mechanical issues Keep detailed records of work performed Maintain a clean and organized work area Requirements: Ability to use diagnostic tools and equipment Excellent problem-solving and communication skills with other employees Detail-oriented and committed to high-quality workmanship Great Attitude is a must Ability to repair the vehicle the first time Pay Information: Competitive salary commensurate with experience Opportunities for additional earnings through commission How to Apply: If you are a talented Technician looking for a rewarding opportunity, we want to hear from you! Please call us at the shop or fill out an application online or on our website! You may also call 505344775eight or text 505730993six if interested!

Job Description HVAC Install Technician – Earn up to $100K+ | Local Work | Home Every Night About Us Since 1929, Wagner Mechanical has been dedicated to providing trusted HVAC, plumbing, and electrical home repairs. With nearly a century of experience, our team takes pride in delivering reliable service, quality workmanship, and lasting comfort for every home we serve. Why join our team? • Competitive Pay + Incentives, • Weekly Paycheck, • Company-Provided Vehicle & Fuel Card, • Free Uniforms, • 401(k) Match & Health Benefits (Medical, Dental, Vision), • Short & Long-Term Disability + Life Insurance, • Paid Time Off (PTO), • Employee Assistance Program What You’ll Do: • Install, replace, and service heating, air conditioning, air quality, and refrigeration systems., • Connect electrical wiring and control systems according to diagrams and safety codes., • Join fuel, water, and refrigerant lines to HVAC systems and test for leaks., • Use electrical testing equipment to check circuits, calibrate components, and ensure safe operation., • Maintain clear communication with the Dispatch, Parts, and Installation teams, as well as your manager., • Keep your company vehicle clean, organized, and properly inventoried., • Complete all required documentation accurately and on time., • Enter completed projects and parts used into the database., • Educate customers on proper system use and maintenance., • Follow all company, industry, and safety standards at all times., • Participate in ongoing training to advance your skills and certifications., • Perform other duties as assigned. What We Are Looking For: • Valid driver’s license a MUST, • High school diploma or equivalent., • 2+ years of HVAC installation experience + Universal EPA, • Strong work ethic and commitment to quality craftsmanship., • Basic understanding of electrical wiring, connections, and system components., • Comfortable working in attics, crawl spaces, and tight environments., • Excellent communication, problem-solving, and customer service skills., • Professional appearance, positive attitude, and team-oriented mindset., • Ability to lift up to 50lbs, climb ladders, work in attics, crawl spaces, and other residential environments., • Experience using ServiceTitan or similar software a PLUS, • NATE Certified a PLUS Pre-Employment Requirements- All employment offers are contingent on successful completion of a criminal background check, drug screening, and motor vehicle report. These are conducted in compliance with applicable laws and regulations. Disclaimer: The above job description is not intended as, nor should it be construed as, exhaustive of all responsibilities, skills, efforts, or working conditions associated with this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of this job. EOE

Job Description Build your best future with the Easy Ice team- Cool Careers Start Here! We’re a growing company that provides an all-inclusive commercial ice machine subscription to business owners nationwide. We’ve been changing our industry for the better since we started in 2009, and we’re not slowing down anytime soon. As a member of our team, you’ll be helping restaurants, bars, hospitals, hotels, and other businesses get the ice they need without spending a fortune or stressing out. We’ll invest in your professional development and overall quality of life because we know employee satisfaction is key to our success. Easy Ice doesn’t just want to be the #1 commercial ice machine solution in America—we also want to be one of the best places to work. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Easy Ice team and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer • Competitive pay, • Company Vehicle & Cell Phone, • Excellent Medical/Dental/Vision/Group Life, • 401k Company Match, • PTO and Holiday Pay, • Fitness Membership Reimbursement, • Hands on experience that promotes a growth-oriented culture, • Personal growth opportunities which encourages employees to “think outside the box”, • Challenging and meaningful work that fosters learning and development, • Fun fast-paced company culture and work environment, • Collaborative team environment to support and mentor each other, • Check us Out: Easy Ice What you will do: The Technician II is an exciting and dynamic position that will appeal to a creative, resourceful, high-energy, and organized person who thrives in service-oriented and customer-facing situations. The Technician II is a vital member of the Easy Ice service team, responsible for ensuring the optimal performance and reliability of ice machines through proficient installation, cleaning, maintenance, and troubleshooting. The ideal Technician II is results-oriented, driven by a passion for delivering exceptional customer service, and possesses a strong work ethic that inspires collaboration and excellence among colleagues. The Technician II will focus on maximizing equipment lifespan, minimizing service calls and emergency ice purchases, and ultimately enhancing customer satisfaction and loyalty. Key responsibilities include providing outstanding service and support during on-site visits, forging positive relationships with customers, managing installation and repair tasks, accurately diagnosing and resolving technical issues, training and support of less experienced technicians, and completing detailed service reports to improve future service quality. The Technician II will also maintain proper truck stock and supplies during field operations, maintain company vehicles in accordance with established policies, and uphold the Easy Ice brand image with professionalism and positive engagement. The successful candidate will embody a flexible, self-motivated approach to work, thrive in a fast-paced environment, and be dedicated to fostering a strong team dynamic while contributing to overall business growth and success. A successful Technician II will drive the following outcomes: • Deliver exceptional service that fosters positive relationships with customers, ensuring they are consistently satisfied with both the quality of service and the performance of their ice machines, • Perform thorough installation, repair, maintenance, cleaning, and troubleshooting of ice machines to improve their performance and longevity, thereby reducing the frequency of service calls and emergency ice purchases, • The Tech II may be required to lead the installation process, driving excellence by exceeding customer expectations with accurate, timely, and efficient installation of ice machine equipment, • Accurately diagnose and resolve technical issues on the first visit, minimizing downtime for customers and enhancing their overall experience, • Achieve or exceed performance metrics related to service response times, resolution rates, and customer feedback, demonstrating accountability and commitment to excellence Demonstrate flexibility in work schedules and adapt to changing operational demands while actively seeking opportunities for personal and professional growth within the field. How you will do it: • The Technician II is a progression from Technician I. All levels of Technician - I, II, and III, are responsible for the installation, cleaning, preventative maintenance, trouble shooting, and repair of ice machine equipment as required. This may include bagging/delivering ice, or other duties as assigned., • Install, clean, maintain, troubleshoot and install Easy Ice equipment, with the goal to increase equipment life and reliability, reduce service calls, and reduce emergency ice purchases, • Provide service and customer support during field visits with a strong emphasis on building positive relationships with customers, • Train and mentor less senior technicians as required, • Manage on-site installation, repair, maintenance and test tasks, • Diagnose errors or technical problems and determine proper solutions, • Communicate effectively with coworkers and customers to ensure all work orders and assignments are completed on time and per Easy Ice standard operating procedures, • Accurately document all actions performed during service visits by taking required photos, completing forms, reports, logs, and maintaining clear records of maintenance activities, • Ensure proper truck stock at all times, avoiding unnecessary return trips and delays in customer service, • Manage the pickup and delivery of ice as needed for service calls, ensuring timely and efficient service for customers, • Facilitate the processing of accurate payments from customers and assist in the proper shutdown or removal of equipment when necessary, • Assist in maintaining a clean, organized, and safe work environment in the shop when applicable by adhering to all safety protocols and cleanliness standards, • Ensure vehicle cleanliness and organization, removing all ice and trash at the end of each shift to improve safety and to uphold a professional appearanceWhat we are look for: Education: High school diploma or general education degree (GED) Vocational/Technical Training preferred Experience: • 1+ year experience in the diagnosis and repair of commercial equipment (prior experience with refrigeration, electrical, HVAC, ice machines, or related equipment), • EPA 2 Certification, • Working knowledge of mobile tools and applications, • Experience in and the ability to demonstrate volt meter operations, • Ability to work a full-time schedule which includes a rotating on-call schedule, • Strong communication skills to effectively interact with customers and team members, • Problem solving abilities and a proactive approach to addressing repair and maintenance issues, • Ability to manage time effectively and prioritize tasks to ensure service calls are completed in a timely manner, • Skills in maintaining organized records and documentation of service activities, • Demonstrated track record of delivering highest level of customer satisfaction Certificates, Licenses and Registrations: • EPA 2 Certification Additional Required Attributes:, • High-energy individual with a positive attitude and strong commitment to customer satisfaction, • Willingness to learn and adapt to new technologies and service protocols in the field of ice machine repair and maintenance, • Strong work ethic and dedication to new technologies and service protocols in the field of ice machine repair and maintenanceWork Environment and Physical Demands:, • The employee is often required to stand; walk; sit; use ladders; use hands to manipulate, handle, or feel surfaces, parts and tools; reach with hands and arms and stoop, kneel, crouch, or crawl, • Occasionally lift and/or move up to 75 pounds, • Stands for extended periods of time (6+ hours per day), • While the noise level in the work environment is usually somewhat quiet, the worker may be subject to elevated noise levels, • Drive a vehicle for up to 60 percent of the hours worked, • Ability to work flexible shifts and adapt to changing work schedules The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not intended to be an exhaustive list of all job duties performed by the personnel so classified. Easy Ice is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information or any other characteristic protected by applicable federal, state or local laws.

Job DescriptionBenefits: • Dental insurance, • Health insurance, • Paid time off, • Training & development, • Vision insurance Job description Filtrex Service Group - HVAC/R Maintenance Technician Filtrex is a nationwide company searching for skilled technicians to perform, conduct, and complete thorough preventative maintenance on all heating, ventilation air conditioning systems and refrigeration equipment throughout various facilities. General duties include inspection, and cleaning of all types of HVAC/R equipment. The ideal candidate must be self-motivated, responsible and carry a professional appearance and attitude. They must also have a broad understanding of smartphone technology for digital communication and documentation. The Position Perform standard preventative maintenance tasks of various pieces of equipment in accordance with manufacturers standards, including filter changes. Complete minor equipment adjustments, including but not limited to belt replacement/adjustment, coil cleaning, evaporator and condensing coil cleaning, ice machine cleaning, maintain and treat condensate pans. Conduct visual and auditory inspections of equipment to assess proper function. Identify, evaluate and make recommendations related to equipment condition in order to prevent and/or minimize equipment failures and down time. Complete preventative maintenance forms on mobile app, taking photos and documenting work as it is performed. Typical Schedule and working conditions Our average technician travels for three weeks per month, working six days per week, with one full week off at home. They have most holidays off, at home. Up to 20 hours of overtime is required each week. Perform duties in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, precarious places, accumulated precipitation on and around serviceable equipment, ceiling plenums, unpleasant odors, wet or damp environments, dimly lit equipment enclosures, etc. Perform simple and power grasping, pushing, pulling, use of hands, fingers, walking, stooping, kneeling, crawling and reaching Lifting and or moving up to 10 lbs. frequently and occasionally lift or move up to 50 - 100 lbs. Must be able to pass a background check Requirements • Minimum 1 year HVAC experience, • Ice machine experience preferred, • 3 year clean driving record, • EPA license preferred, • OSHA 10 license preferred, • Technologically savvyAbility To, • Function highly independent with minimal direct supervision, • Understand and follow oral and written instructions, • Continually enforce highest standards on work performed, • Maintain security and accountability on access of equipment and facilities, • Comply with all applicable health and safety regulations, policies and established work practicesCompensation and Benefits, • 5 days of PTO after 60 days and vacation accrual, • Competitive benefit package including vision, dental, health, • Employee Incentive Program, • Weekly Payroll, • Hotel and fuel cards provided, • Work phone and van provided, • Work shirts and hats providedIf you think that this position is right for you, please apply now with your resume! We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire.

We are VCA Wyoming Animal Hospital in Albuquerque, NM. Our hospital is growing, and we are looking for a dedicated Veterinary Technician to join our team of compassionate veterinary professionals. Our supportive team believes in collaborative care, a high-quality, low-stress environment for our patients and their families, and enjoys a shared passion for the human-animal bond. If you are an experienced Veterinary Technician, we’d love to meet you! , Location: 2740 Wyoming Blvd NE #1, Albuquerque, NM 87111 Schedule: Full-Time, 40 hours Salary: $ 20 -$ 26 per hour We provide high-quality and compassionate care for all ages of dogs and cats; from routine wellness care, dentistry, and surgery, to treating and managing illness and injuries. We are here to help people take the best care of their pets A day in the life of a vet tech at VCA Wyoming may look like: Celebrating the adoption of a new puppy or kitten with a new owner and helping them make sure they and their pet get the best start together on a healthy and happy life. Helping a client with an older pet navigate the changes they are seeing and the concerns they have. Or compassionately treating an injured pet to help give both the pet and the client some relief and peace of mind. Working along with the doctors in managing cases to diagnose and treat pets of all ages. Assist in surgery or dentistry, both for preventative care and to treat more serious issues. There are plenty of opportunities to squish the cheeks of the cutest puppy and cuddle the softest kitten. You may have to take a moment to give attention to our beloved clinic cat, Mr. Burns. We encourage high-fiving your teammates after a job well done and giving support to each other after an emotionally challenging case. We are looking for team members who can take quality history on a case, provide caring nursing care, are proficient in venipuncture and radiology, enjoy client communication and education, and are comfortable with running and monitoring anesthetic procedures. Benefits: We offer competitive compensation along with a comprehensive benefits package, including medical, dental, vision, and paid vacation/sick days, 401(k), generous employee pet discounts, and more for qualifying associates! Apply Today! If you are a current associate, you will need to apply through our internal career site. Please log into Workday and click on the Jobs Hub app or search for Browse Jobs. Benefits: We offer competitive compensation along with a comprehensive benefits package, including medical, dental, vision and paid vacation/sick days, 401(k), generous employee pet discounts and more! The information in this position description indicates the general nature and level of work to be performed. It is not designed to be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. Management reserves the right to revise the job description or require that other tasks be performed when the circumstances of the job change (for example, emergencies, change in personnel, workload, or technical development) We are proud to be an Equal Opportunity Employer - Veterans / Disabled. For a complete EEO statement please see our career page at vcacareers.com

Job DescriptionJob Title: Maintenance Technician Job Description The Maintenance Technician is responsible for the upkeep and repair of all equipment, including production machinery, warehouse systems, office areas, and the building itself. This role encompasses a broad range of maintenance tasks such as mechanical, electrical (up to and including three-phase), plumbing, painting, welding, and some carpentry. The ideal candidate must be able to work independently or as part of a team with minimal supervision. Responsibilities • Coordinate maintenance activities with Equipment Operators and Supervisors., • Troubleshoot a wide variety of machine applications to address production needs., • Diagnose and repair control wiring, relay logic, motor drive circuits, control system devices, photo eyes, limit switches, proximity switches, and transducers., • Utilize tools such as Digital Volt Meter and AMP probes to diagnose electrical issues., • Perform mechanical, electrical, pneumatic, and hydraulic installation, repair, and servicing of machinery and support systems., • Conduct systematic preventive maintenance, including adjustments, inspections, and minor repairs on plant equipment., • Prioritize machine breakdown repairs over other projects and tasks to minimize production downtime., • Perform welding and machine shop tasks to repair and improve equipment and machinery., • Complete all assigned maintenance projects in a timely, efficient, and safe manner., • Maintain a clean and organized maintenance area for storage of parts and equipment, ensuring all shop equipment is properly maintained., • Adhere to all safety procedures, including OSHA regulations, and maintain a safe working environment., • Collaborate with shift supervisors and machine operators to stay informed of daily equipment issues., • Design and fabricate parts to improve equipment performance and safety., • Maintain a professional image when interacting with internal and external customers and vendors., • Perform other tasks as assigned by management.Essential Skills, • Troubleshooting, • Industrial maintenance including electrical, mechanical, hydraulics, and pneumatics, • Preventive maintenance and repair, • Ability to read and interpret schematics and blueprints, • Experience in welding and fabrication, • Proficiency in machine repair, including conveyor systems, • Strong knowledge of safety procedures and compliance with OSHA regulations, • Ability to work independently and as part of a teamAdditional Skills & Qualifications, • Proven experience in industrial maintenance, including mechanical, electrical, plumbing, and welding, • Ability to troubleshoot and repair various types of machinery, electrical circuits, and mechanical systems, • Strong organizational skills with the ability to maintain clean and safe work areas, • Ability to prioritize tasks and manage time effectively, • Welding and fabrication skills are a plusWhy Work Here? Enjoy a bonus based on company performance along with comprehensive medical, dental, and vision insurance. Participate in a 401(k) retirement savings plan with company match and enjoy paid time off including vacation, company holidays, and parental leave. Benefit from our Employee Assistance Program (EAP) and other perks such as life insurance, disability coverage, and wellness programs. Work Environment Industrial work environment without air conditioning due to product sensitivity to moisture. Work schedule consists of 10-hour shifts from Monday to Thursday, 5am to 3:30pm with a 30-minute lunch break. Occasional Fridays may be required depending on operational needs to ensure continuity. Job Type & Location This is a Contract to Hire position based out of Albuquerque, NM. Pay and Benefits The pay range for this position is $24.00 - $31.20/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Albuquerque,NM. Application Deadline This position is anticipated to close on Jul 13, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionWHO WE ARE • Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States., • We currently operate in 40+ locations across 11 states, and we have over 1,600 team members., • Bruckner’s is more than just a place selling parts and working on trucks; we are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it.OUR CORE VALUES, • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER, • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplace Job Summary: Working with the service manger. Responsible for the safe, efficient, and profitable operation of the Service department. Oversees the work of the mechanics. Able to make proper diagnosis of all components and recommended repairs. Essential Duties and Responsibilities: Include the following and other duties may be assigned. • Diagnostic ability of all components of the truck., • Help in writing up repair orders and communicating with the drivers and owners in order to determine problems and solutions to their truck repair needs., • Schedules an assigns jobs ad work areas to employees according to their skills and knowledge. This should be accomplished in a manner to eliminate time lost between jobs., • Inspect and advise the mechanics on work as it progresses., • Keep track of each customer job and be able to advise the customer as to time of completion, cost of repairs, additional repairs, etc., • Road test and dyno test trucks in order not only to diagnose problems, but also to determine if repairs are complete., • See that the buildings, grounds, and work areas are kept clean and neatly arranged. See that all company tools and equipment are properly maintained., • Help in completing repair orders by getting the mechanics write up of the repairs, seeing that parts are billed correctly, and all needed lines are added to the ticket as it progresses. Be sure each repair is coded correctly., • Must be familiar with warranty of all parts of the truck and able to determine if a repair is warrantable., • Must help to insure safe working conditions for all employees. Educational Requirements: Minimum high school diploma required. Work Experience: Minimum four years as a mechanic and at least 2 years as a shop foreman or lead mechanic. Mathematical Skills & Reasoning Ability: Should be able to read computer generated reports, office reports, invoices, etc. Also it is required to operate computer terminals. Special Skills: Must possess and use good interpersonal skills and have the ability to interact well with customers, vendors, and co-workers in a positive and constructive manner. Must also have and maintain a Commercial Drivers License (CDL). Physical Demands: Involves essential ability to climb around, on and under trucks in order to properly inspect and diagnose all types of problems and repairs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to lift 50 pounds to the waist and 25 pounds to the shoulder. Want to know more about our family-owned company, Proud that our 1600+ employees view us as the employer of choice! YouTube- Service Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Nonprofit Industry - Mission Driven - Career Advancement Opportunities This Jobot Job is hosted by: Daniel Gonzalez Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume. Salary: $20 - $30 per hour A bit about us: Are you a seasoned Pharmacy Technician with a passion for healthcare and an eye for detail? Currently seeking a dedicated and experienced Permanent Pharmacy Technician to join our onsite team. This is a unique opportunity to blend your healthcare skills, and making a significant impact on our business. Why join us? You'll have the opportunity to make a significant impact on our operations, contribute to our growth, and help us provide exceptional service to our clients. We look forward to welcoming you to our team! Job Details Responsibilities: As a Permanent Pharmacy Technician, you will play an integral role in our team. Your responsibilities will include: 1. Setting up and maintaining patient profiles, ensuring accuracy and confidentiality at all times. 2. Preparing and handling IV infusions with utmost care and precision. 3. Utilizing pharmacy software and electronic health records proficiently to streamline operations and maintain accurate data. 4. Processing insurance and handling prior authorizations, navigating complex policies and procedures with ease. 5. Collaborating with a multidisciplinary team to provide seamless service to our clients. 6. Staying up-to-date with industry standards, regulations, and best practices, and implementing them in your work. 7. Assisting in inventory management, ensuring that all necessary medications and supplies are available when needed. 8. Providing exceptional customer service, addressing patient inquiries and concerns with empathy and professionalism. Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionJob Description: Join Power Ford as a Mobile Service TechnicianPower Ford, a leading automotive dealership in Albuquerque, New Mexico, is recognized for its dedication to excellence and customer satisfaction. We are committed to innovation and providing convenient automotive services. We are currently seeking a Mobile Service Technician to perform maintenance and light repairs at customer locations.Job DetailsSalary: Competitive hourly pay with productivity or performance-based bonusesJob Type: Full TimeLocation: Albuquerque, NMKey ResponsibilitiesPerform routine maintenance including oil changes, tire rotations, filter replacements, and fluid services at customer locations.Operate and maintain the mobile service van, ensuring it is organized, equipped, and safe.Diagnose minor vehicle issues and effectively communicate findings to customers and service team members.Deliver professional, customer-focused service while keeping the work area clean and efficient.Complete all service documentation accurately using dealership systems.Adhere to all safety, environmental, and company policies.Coordinate scheduling, parts requirements, and follow-up services with the Service Department.Maintain the dealership’s reputation through integrity, professionalism, and quality service.Participate in ongoing training and certification programs offered by Ford Motor Company and Power Ford.Working EnvironmentRegular operation of the company’s mobile service vehicle.Work outdoors with exposure to various weather conditions.Physical activities including standing, bending, and lifting up to 50 pounds.Flexible scheduling may be required, including occasional weekends or evenings.Power Ford is an Equal Opportunity Employer and maintains a drug-free workplace. We welcome your application and look forward to hearing from qualified candidates. Job Requirement:High school diploma or equivalent; technical or ASE certifications preferred.Previous experience as an automotive or lube technician is required.Strong mechanical aptitude with knowledge of vehicle systems and maintenance procedures.Excellent communication and customer service skills.Ability to work independently and effectively manage a mobile service schedule.Valid driver’s license with a clean driving record.Physical capability to lift up to 50 pounds and work outdoors.Dependable, punctual, and professional appearance and demeanor. WHAT WE OFFER: Tremendous product & inventory Ongoing company-wide training Strong company reputation Growth opportunities Professional, enthusiastic & supportive working environment When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this work. This is not an exhaustive list of all duties and responsibilities. We reserve the right to amend and change responsibilities to meet business and organizational needs as necessary. We are an Equal Opportunity Employer and a drug-free workplace. We Would Really Like To Hear From You!

Job DescriptionWHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. We currently operate in 40+ locations across 12 states, and we have over 1,600 team members. • Bruckner’s is more than just a place selling parts and working on trucks, • We are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it, • We contribute to our local communities, • We care about our people OUR CORE VALUES, • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER, • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplace POSITION SUMMARY: Performs preventive maintenance and minor repairs on all types of trucks and/or equipment to maximize safe and productive operations on site at customer’s locations. This position will have an impact in the following areas: customer relations, equipment diagnosis, failures of a motor vehicle and/or its related equipment and will involve professionalism, service/product training, and gathering new business relationships with prospective customers. REPRESENTIVE RESPONSIBILITIES: The following responsibilities are general duties that a particular employee in this position may or may not be required to perform. The actual duties required of this position will vary. • Inspects trucks and/or equipment, for condition, operation, parts and fluid levels., • Checks, fills and changes out appropriate fluids for all vehicle parts including engine, transmission, differentials, final drives, pump drives and hubs., • Greases, oils, and lubricates components during preventive maintenance service., • Performs adjustments to various systems during preventive maintenance service., • Maintains and/or changes air, oil, coolant and fuel filters., • Performs cooling systems maintenance., • Identifies and designates problems., • Completes necessary repair and preventive maintenance work., • Checks safety equipment on truck and/or equipment., • Drives truck in and out of repair area., • Follows all safety policies and procedures., • Completes required paperwork, documents parts and material usage and accounts for applied times (i.e. work order times versus time card times.), • Represent the Company Core Values and adheres to the guidelines of the Employee handbook on a daily basis to all internal and external customers., • Performs other job-related duties as assigned.PHYSICAL REQUIREMENTS: The following physical activities or abilities are commonly, but not always, associated with the performance of this position. The actual requirements of this position will vary. • Lift, carry and push/pull at least 50 pounds, • Climb into and out of truck., • Work in the outside environmentEXPERIENCE, EDUCATION, CERTIFICATIONS: Required: • Valid driver license, • Valid Class A CDL or the ability to obtain within 60 days of employment Preferred: • Equivalent of a high school diploma or G.E.D certification, • Prior mechanic experience., • Automotive certification., • Service Excellence classification: medium/heavy truck. Want to know more about our family-owned company, Proud that our 1500+ employees view us as the employer of choice! YouTube- Service Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR #greatbendks #GBKS #greatbend #kansas

\n PRIDE Health is seeking a travel Pediatric Echocardiography for a travel job in Albuquerque, New Mexico. Job Description & Requirements\n \n • Specialty: Pediatric Echocardiography\n, • Discipline: Allied Health Professional\n, • Start Date: 08/03/2026\n, • Duration: 13 weeks\n, • 40 hours per week\n, • Shift: 10 hours, days\n, • Employment Type: Travel\n \n An Echo Technician performs echocardiograms to assist in diagnosing heart conditions. Responsibilities include preparing patients for exams, operating ultrasound equipment, capturing images of the heart, and assisting doctors in interpreting results. Echo Technicians work in hospitals and outpatient clinics. \n Apply for specific facility details. \n Pride Health Job ID #18757330. Pay package is based on 10 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Echo Tech:Hospital,07:00:00-17:00:00 About PRIDE Health\n \n PRIDE Health is the minority-owned healthcare recruitment division of Pride Global—an integrated human capital solutions and advisory firm. With our robust and abundant travel nursing and allied health employment options across the U.S., PRIDE Health will allow you to help change the way the world lives and heals as it connects you with the industry’s leading healthcare organizations. \n \n Pride Global offers eligible employee’s comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors. \n \n Benefits\n \n • Weekly pay\n, • Holiday Pay\n, • Guaranteed Hours\n, • 401k retirement plan\n, • Cancelation protection\n, • Referral bonus\n, • Medical benefits\n, • Dental benefits\n, • Vision benefits\n \n

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned Porsche technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a Porsche Master Technician to join our elite team. If you specialize in Porsche and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest Porsche and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with European vehicles Strong specialization and experience with Porsche vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on Porsche vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc237956

Job DescriptionCompany Description Christian Brothers Automotive Benefits: • $35 - 45/HR for Highly Skilled Technicians, • Earn More with Performance-Based Bonus, • 6 Paid Holidays Annually, • Matching 401K Retirement, • Health, Dental & Vision Insurance, • Paid Time Off, • Closed Every Weekend To Spend Time With Family & Friends, • Real-time Automotive Technical Support, • On-Going Training & Career Advancement, • Employee Appreciation Events, • Locally Owned & Operated, • We Put People First, Creating a Culture of Respect, Growth, and Shared SuccessJob Description Job Title: Automotive Technician / Mechanic Location: 2014 Southern BLVD SE, Rio Rancho, NM 87124 Job Overview: We are looking for technicians / mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what’s right for our customers. Immediate Interviews Available! Responsibilities include, but are not limited to: • Technicians use their knowledge & skills to diagnose and fix vehicles for our customers, • Continuously build experience as an automotive mechanic across a wide range of domestic and foreign vehicles, • Complete full, accurate, and honest courtesy vehicle inspections, • Work as part of a team to troubleshoot customer concerns quickly and effectively, • Follow and promote our high standards of safety, cleanliness, and organization, • Work closely with the service department and effectively communicate customer concerns, • Work together with other Technicians to solve problems, meet deadlines, and deliver distinguished resultsQualifications Qualifications: • Must be able to safely and accurately diagnose mechanical and electrical concerns, • Positive attitude and a desire to serve customers, • 5+ years of professional experience as an automotive technician/mechanic, • ASE Certifications Required, • Proficient in using computers and related devices to assist in the repair and maintenance of customer vehicles, • Meet or exceed hourly goals, • Aptitude for learning additional skills and processes, • Professional appearance and strong communication skills, • A desire for long-term career development Physical Requirements: • Occasionally lift and/or move over 100 pounds, • Be able to work with tools on vehicles lifted above their head, • Work in tight spaces as dictated by the vehicle’s needed repair, • Have the needed dexterity in order to efficiently use hand tools, • Walk/stand for the majority of their workday, • Drive manual transmissions vehicles, • Efficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support and access to our private Technician Assistance Center. Thank you for viewing this opportunity! This job posting is for an opening at a Christian Brothers Automotive location that is independently owned and operated by a local licensed franchisee. Your application and any information included with it will be submitted to the franchisee for further handling. Christian Brothers Automotive Corporation ("CBAC") is a separate business entity. No CBAC employee will be involved in any decisions regarding your employment application. If you are hired for this position, you also understand and acknowledge that the local franchisee will be your employer and that CBAC will not be your employer. The local franchisee is solely responsible for all decisions related to your employment, including hiring, firing, discipline, compensation, scheduling and supervision. All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices.

Job Description Building Success since 1936 For over 87 years, Power Equipment Company has provided powerful heavy equipment rental and sales solutions for owners and operators in the aggregate, construction, crane, paving and compaction industries. Our experienced team remains committed to delivering exceptional value by providing premier heavy construction equipment and reliable product support. We pride ourselves on being dedicated, capable team players with effective solutions for business challenges. We understand how important it is to keep our customer’s equipment up and running. Our success is rooted in the success of our employees because they are our greatest asset. That’s why we invest in their future and offer a wide range of benefits to help them learn, grow and prosper. Job purpose We are looking for a Lube Technician to Join our growing team and help drive our customer service goals and objectives in the shop/field. The ideal candidate will have a strong background in Heavy Equipment service and support, have a commitment to Safety and desire to provide first class customer service. Duties and responsibilities • Performs service tasks as they may be assigned by the service manager or the shop manager., • Keeps tracks of all changes in various models of equipment sold and serviced by the distributors., • Brings to the attention of the Service Manager any additional work required on unit., • Utilize great technical skills to perform hydraulic and electronic tests, also using VCAD's computer programming for diagnostics and parameter settings., • Analyze and utilize schematic diagrams and technical manuals., • Utilize strong organizational and customer service skills to order parts and provide quotes for clients., • Keeps work area in a clean and orderly manner., • Notifies shop superintendent/foreman if shop equipment or vehicle is not in serviceable condition or constitutes a safety hazard., • Returns tools to crib or toolbox at the end of each shift in a clean, working condition ready for the next man to use., • Takes advantage of all opportunities to attend schools and training sessions in order to upgrade technical competence., • Practice inter-personal skills to maintain a positive relationship with co-workers and supervisors., • Performs other duties as prescribed by the shop superintendent from time to time. Qualifications • High School diploma; Trade School (2 yr. degree) preferred, • Must be able to successfully hold certifications for MSHA, First Aid/ CPR, etc., • CDL driver’s license preferred, • Must be able to work overtime before or after normal operating hours Working conditions The employee will generally be working in an field/shop environment. The employee may be required to wear appropriate PPE equipment. The employee could occasionally be exposed to extreme temperatures, fumes, or airborne particles. The noise level in the workplace is moderate. Why Power Equipment Company? The one characteristic that distinguishes Power Equipment Company is the dedication and passion of our employees. It’s no secret that employees who are empowered each day to make a difference for the company become engaged, long-tenured partners in the success of the customer. That’s why our company culture has always focused on the success and well-being of our greatest asset…our employees. That is the Power Equipment Company difference. We offer: • Competitive salary, • Medical, dental, and vision insurance, • 401(k) with company match, • Generous paid time off, • Paid holidays, • Paid continuing career education, • Life insurance, including AD&D (family coverage is also available), • Long-term disability insurance, • Short-term disability insurance is available, • Flexible Spending Accounts (FSA) and Health Spending Accounts (HSA), • Health and wellness program, • Opportunities for career advancement To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Power Equipment is an equal opportunity employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by federal and state law.

Job Description Our shop is located in GARLAND TX. For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in GARLAND TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned AUDI Master Guild Technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a AUDI Master Guild Technician to join our elite team. If you specialize in AUDI and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest AUDI and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with AUDI vehicles Strong specialization and experience with AUDI vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on AUDI vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc243589

Job Description Position Title: Patient Service Representative (PSR) Remote independent contract worker position Competitive fee for service Flexibility – work around your schedule Lifesaving medical technology The Cardiac Management Solutions division of ZOLL Medical Corporation develops products to protect and manage cardiac patients, including the LifeVest® wearable cardioverter defibrillator (WCD) and associated technologies. Heart disease is the leading cause of death for both men and women in the U.S. At ZOLL, your services will help to ensure cardiac patients get the life-saving therapy they need. To date, the LifeVest® has been worn by hundreds of thousands of patients and saved thousands of lives. Preferred Candidates include (not limited to): RN, EMT, Paramedic, EMS, Firefighter, PA, LPN, MA, Phlebotomy, RCIS, CVT, EKG Technician, etc. All candidates reviewed on an individual basis. Summary Description: The Cardiac Management Solutions division of ZOLL, manufacturer of the LifeVest®, is seeking a Patient Service Representative (PSR) in an independent contractor role to train patients on the use and care of LifeVest ®. LifeVest® is worn by patients at risk for sudden cardiac arrest (SCA), providing protection during their changing condition. It is lightweight and easy to wear, allowing patients to return to their common activities of daily living, while having the peace of mind that they are protected from SCA. This is the perfect opportunity for the health professional with patient care and teaching experience to supplement his or her income. A typical LifeVest® patient is in the hospital awaiting discharge, and the Patient Service Representative sets up the equipment and trains the patient and caregivers on the use and care of the device. They also follow up with patients as needed to assure patient understanding and satisfaction. PSRs retain the flexibility to accept or decline assignments as their schedules dictate. Most assignments can be scheduled during free time – before/after work, and on days off. Responsibilities: • Contact caregivers and family to schedule services, • Willingness to accept assignments which could include daytime, evenings, and/or weekends., • Travel to patient’s homes and health care facilities to provide services, • Train the patient and other caregivers of patient (if applicable) in the use of LifeVest®, • Program LifeVest® according to the prescribing physician’s orders, • Measure the patient and determine correct garment size, • Review with patient, and have patient sign, all necessary paperwork applicable to the service., • Transmit signed copy of the Patient Agreement and WEAR Checklist to ZOLL within 24 hours of the assignment, • Manage device and garment inventory, • Disclose family relationship with any potential referral source Qualifications: • Have 1 year patient care experience, • Patient experience must be in a paid professional environment (not family caregiver), • Patient experience must be documented on resume, • Completion of background check, • Florida and Ohio candidates must complete a level 2 screening, fee not paid by ZOLL, • Disclosure of personal NPI number (if applicable), • Valid driver’s license and car insurance and/or valid state ID, • Willingness to pay a $30 annual DME fee which is deducted from a completed Work Order, • Willingness to pay for additional vendor credentialing (i.e. RepTrax) if needed geographically Powered by JazzHR q8nbZeC2Dy

Job Description Global Resource Solutions, Inc. (GRS) is seeking an enthusiastic, motivated, detail orientated, and talented individual for the position of Information Technology/Assurance Specialist I. Job Description: Summary: The IT/Assurance Specialist I primary function is working within Special Access Programs (SAPs) supporting Department of Defense (DoD) agencies, such as HQ Air Force, Office of the Secretary of Defense (OSD) and Military Compartments efforts. The position will provide “day-to-day” support for Collateral, Sensitive Compartmented Information (SCI) and Special Access Program (SAP) activities. Essential Duties & Responsibilities: • Establish complex operational software configuration controls and system interfaces for computer system(s) assigned, • Maintain file servers, Firewalls, network access, Security Monitoring Systems and system documentation as required, • Analyze and troubleshoot system anomalies to ensure optimum equipment performance, • Prepare system for operational use and support operational tests, • Review, prepare, and update AIS accreditation packages, • Notify customer when changes occur that might affect AIS accreditation/certification, • Perform AIS self-inspections, • Provide security coordination and review of all system test plans, • Identify AIS vulnerabilities and implement countermeasures, • Ensure AIS and network nodes are operated, maintained, and disposed of in accordance with security policies and practices, • Perform VTC System Administration, Scheduling, & Configuration, • Provide guest networks Client Support, • Perform account creations, changes, & deletions, • Provide Help Desk & troubleshooting, • Perform Hardware/Software System Configuration, upgrades and modifications, • Provide Personal-Issue Laptop Support, • Perform Media Control & Accountability, • Perform COMSEC account/equipment management Requirement: • Two (2) years related experience, • Bachelor’s Degree in a related area or equivalent experience (Four (4) years), • Must meet position and certification requirements outlined in DoD Directive 8570.01-M for Information Assurance Technician Level 2 within 6 months of the date of hire. Security Requirements: • Current Top Secret Clearance with SCI Eligibility, • Eligibility for access to Special Access Programs, • Willingness to submit to a Counterintelligence Polygraph Skills: • Thorough knowledge of Microsoft Windows 2008 R2/2012 R2 Server, Microsoft Exchange Server 2003/2010, Microsoft Windows 7/10 operating systems (OS) administration and associated hardware, • Working knowledge of Local Area Network (LAN) and Wide Area Network (WAN) technologies and data backup technologies to include communication security (COMSEC) integration, • Working knowledge of Risk Management Framework, , Common Criteria, and System Security Policy as they relate to A&A, • Working knowledge and current relevant experience with PL1 & PL2 systems; experience with PL3 & PL4 cross domain solutions desired, • Must be familiar with current security policy/manuals other guiding policy documents, • Must have the ability to work in a dynamic environment and effectively interact with numerous DOD, military/civilian personnel and industry partners, • Working knowledge of Microsoft Office (Word, PowerPoint, and Excel), • Possess a high degree of originality, creativity, initiative requiring minimal supervision, • Willingness to travel within the organizational geographic Area of Responsibility (AOR) (note - could be extensive, and will include both air and ground transportation), • Must be able to lift up to 50lbs Physical Requirements: This position requires employees to be willing and able to: sit, bend, reach, stoop, squat, stand, and walk. Communication: Excellent customer service via phone and face to face conversation, excellent written and oral command of English. GRS is an Equal Opportunity Employer. GRS will continue to abide by obligations under VEVRRA and Section 503 physical or mental disability, protected veteran status, or any other characteristics that are protected by law.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. Great River Technology (GRT) located in Albuquerque, NM, a wholly owned subsidiary of Data Device Corporation, is a leader in high performance digital video and data development tools and services for the mil/aero industry. Since it’s founding in 1996, it has developed partnerships with leading commercial and military companies worldwide. This position is 100% onsite at GRT in Albuquerque, NM. Due to U.S. export control requirements, this position is open only to candidates who qualify as a “U.S. Person.” This generally includes U.S. citizens, U.S. nationals, lawful permanent residents/green card holders, and certain protected individuals, including refugees and asylees. Description: The Electronic Hardware Assembly Technician applies comprehensive technical knowledge to assemble, modify, install, troubleshoot or repair various electronic components for ground and airborne applications. The role requires a proactive, organized, and professional individual who can manage a variety of technical tasks and responsibilities, often in high-pressure and time-sensitive situations. The Technician receives guidance, as needed, from a supervisor or engineer. Responsibilities: The responsibilities noted below are not all-inclusive, they are core responsibilities subject to change based on the needs of GRT. • Assembly and Test, • Ability to read and follow information on work instructions., • Completion of second operations on populated electronic circuit boards., • Execute additional assembly steps such as loading firmware., • Execute final acceptance testing of product., • Prepare finished products for shipment., • Troubleshoots and repairs ground and airborne electronic equipment., • Able to install Input / Output connectors, solder and removal of SMT devices., • Other, • Diagnoses, repairs or replaces electronic components as required., • Maintains required records and forms in accordance with company and customer specifications., • Can manage and work through competing priorities, often with little supervision., • Collects data, conducts research, and compiles information relevant to engineering projects or other business objectives., • Work with Engineering on card modifications during prototyping and product development., • Work with environmental equipment to test products through temperature cycles and vibration testing. Requirements: • High school diploma or equivalent., • AS degree in Electronics Technology or other closely related field preferred, but not required., • Soldering skills. IPC J-STD-001 and/or IPC-A-610 certification a plus, but not required., • Experience inspecting, troubleshooting, and repairing electronic assemblies, circuits, and circuit boards., • Experience assembling, installing, routing, terminating, soldering, and repairing electrical wiring harnesses or a variety of electrical components and equipment., • Able to read and interpret schematics and drawings., • Familiar with Quality Systems, Voltmeters, Oscilloscopes, and test equipment., • Discerns colors and numbers., • Works under limited supervision., • Experience working in an engineering or manufacturing environment., • Complies with ESD and other Quality standards., • Proficient with MS Office Suite., • Able to lift up to 25 pounds.