Trabajos manufacturing supervisor en Houston, TexasCrear alertas

Job Description A manufacturing facility in the Northwest Houston area is seeking a dependable Shop Helper to support daily production and shop operations. This role is ideal for candidates who are mechanically inclined, hands-on, and comfortable working in a fast-paced industrial environment. Key Responsibilities: • Assist production staff with daily shop tasks, • Load, unload, and move materials, parts, and finished products within the shop, • Perform basic measurements using a tape measure to ensure job accuracy, • Use common hand tools such as wrenches, sockets, screwdrivers, and wire cutters, • Assist with basic power tool operation including drills and saws (preferred), • Follow shop safety procedures, work instructions, and supervisor direction Requirements: • Must be mechanically inclined and comfortable working with tools, • Ability to read a tape measure accurately is required, • Steel-toe boots required, • Basic knowledge of hand tools required; power tool experience preferred, • Must have a valid Driver's License., • Ability to follow instructions and work efficiently in a shop environment

Job Description job tittle:Manufacturing Plumbing Location-pasadena Shift- full time Pay rate:20 JOB SUMMARY • we are looking for a reliable and hardworking plumber to join our team. the plumber will perform plumbing work in a fast paced manufacturing environment under the direction of an area supervisor or lead. Responsibilities • install and assemble water supply lines and DWV lines, • connect sinks, toilets, and other common plumbing fixtures., • inspect finished work to ensure quality and accuracy., • perform other duties assigned. Qualifications & skills • basic knowledge of plumbing, • ability to read and understand English., • Bilingual preferred Spanish speakers are ok., • ability to follow simple and complex written and verbal instructions., • basic math skills, • ability to use hand tools such as drills, grinders, miter saws, and rivet guns., • PHYSICAL REQUIREMENTS AND WORK ENVIRONMENT., • work is primarily performed indoors in a manufacturing/shop environment., • position requires standing approximately 100% of the workday., • must frequently bend, squat, lift, push, and pull materials. To Apply: #MEM-PAS For more information on how to apply, please contact us at (713) 910-3534. ask for Lucio Resumes can be submitted via email to lucio@memcostaffing.com Alternatively, applications may be submitted in person at our office location: 2626 S. Shaver St, Suite B1, Pasadena, TX 77502

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and experienced Wiring Technician Lead to provide hands-on leadership and technical support within our wiring department. The Lead Wiring Technician will lead and support a team of Wiring Technicians in the assembly and wiring of custom electrical control panels while ensuring work is completed safely, accurately, and according to engineering drawings, project specifications, and Panelmatic standards. This role is responsible for helping coordinate daily work, providing technical guidance, inspecting completed work, troubleshooting wiring issues, and supporting the team in meeting project schedules and quality requirements. The Lead Wiring Technician will work closely with Production Supervisors, Engineering, and other team members to ensure projects are completed correctly and efficiently. Job Duties: • Lead and provide day-to-day direction and technical support to Wiring Technicians., • Review engineering drawings, wiring diagrams, schematics, and project specifications to determine assembly and wiring requirements., • Help assign and prioritize daily work based on project schedules and production needs., • Layout, measure, drill, and tap subpanels for initial assembly preparation., • Install DIN rail, equipment, SEL relays, lockout relays, test switches, terminal blocks, nameplates, wire duct, and other electrical components., • Cut, tag, route, and terminate wires according to project drawings and Panelmatic standards., • Inspect wiring and panel assemblies to ensure proper routing, labeling, termination, workmanship, and overall quality., • Troubleshoot wiring issues and assist technicians in resolving assembly and electrical discrepancies., • Identify drawing, material, or production issues and communicate them to the appropriate Supervisor or Engineering team., • Train and mentor Wiring Technicians on proper wiring techniques, tools, equipment, safety practices, and Panelmatic standards., • Provide hands-on assistance with complex or difficult wiring and panel assembly tasks., • Alter and cut steel, plastic, and other materials as required for panel fabrication and assembly., • Ensure work is completed in accordance with applicable safety requirements, quality standards, and project specifications., • Monitor progress and communicate project status, delays, material shortages, or other concerns to production leadership., • Help maintain an organized, clean, and safe work area., • Support testing, inspection, and final quality checks as needed., • Assist with onboarding and training new Wiring Technicians., • Promote teamwork, accountability, and a positive work environment., • Perform additional duties as needed to support project schedules, production goals, and overall department operations. Requirements • High school diploma or equivalent preferred., • 3+ years of experience in electrical panel wiring, electrical assembly, industrial wiring, or a related manufacturing environment., • Previous lead, senior technician, or informal leadership experience preferred., • Ability to read and interpret electrical schematics, wiring diagrams, engineering drawings, and assembly instructions., • Strong understanding of electrical panel assembly and wiring practices., • Experience using hand tools, power tools, wire strippers, crimpers, drills, and other electrical assembly equipment., • Ability to accurately measure, cut, route, label, and terminate electrical wiring., • Strong attention to detail and commitment to quality., • Ability to troubleshoot wiring and assembly issues., • Ability to communicate effectively with technicians, supervisors, engineering, and other departments., • Ability to provide direction, training, and support to less-experienced team members., • Ability to work independently while also functioning effectively as part of a team., • Ability to prioritize tasks and help keep projects on schedule. Benefits Benefits: • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401K Retirement, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and experienced Lead Industrial Electrician to provide hands-on leadership and technical direction within our electrical integration team. The Lead Industrial Electrician will lead and support a team responsible for the electrical installation, wiring, and integration of equipment within custom metal buildings and enclosures. This position will ensure electrical installations are completed safely, accurately, and in accordance with engineering drawings, customer specifications, Panelmatic standards, and applicable NEC codes. The Lead Industrial Electrician will coordinate daily work activities, provide technical guidance to team members, inspect completed work, troubleshoot issues, and help ensure projects remain on schedule. The Lead Industrial Electrician will remain hands-on in the installation and integration process while serving as a technical resource and leader for the team. Job Duties: • Provide day-to-day direction, guidance, and technical support to Electrical Integration Technicians., • Help coordinate daily assignments and prioritize work based on project schedules and production requirements., • Lead by example and maintain high standards for safety, quality, productivity, and workmanship., • Train, coach, and mentor team members on electrical installation practices, tools, equipment, and Panelmatic standards., • Assist with onboarding and training new employees., • Monitor team progress and communicate project status, delays, material shortages, or technical concerns to the appropriate Supervisor or Production Manager., • Help identify and resolve production issues that could impact project schedules or quality., • Work closely with Engineering, Production, Quality, and other departments to resolve installation and technical issues., • Provide hands-on assistance with complex electrical installations and difficult integration tasks., • Consult blueprints, work orders, schematics, one-line diagrams, and engineering drawings to safely construct and integrate electrical systems., • Interpret customer specifications and engineering requirements to determine proper installation methods., • Perform and oversee conduit bending, threading, and installation, including EMT, RGS, and RAL., • Design and install conduit systems within space restrictions in accordance with one-line diagrams, NEC requirements, and customer specifications., • Install electrical panels, breakers, fuses, disconnects, and related electrical equipment., • Install and terminate electrical wiring, outlets, switches, junction boxes, terminal boards, and wall boxes., • Install electrical systems including security systems, fire detection systems, UPS systems, and other building or equipment systems., • Install fiber optic cable, communication lines, power systems, and other electrical infrastructure as required., • Install electrical components in buildings, machinery, computers, equipment, and custom enclosures., • Install heating and cooling electrical systems in industrial buildings and enclosures., • Install cable tray and open wiring systems., • Install utility fixtures, outlets, terminal boards, switches, and wall boxes using appropriate hand and power tools., • Cut openings and drill holes for fixtures, outlet boxes, fuse holders, panels, and other electrical components., • Measure, cut, and install frameworks and supports for conduit, control panels, junction boxes, and other electrical devices., • Connect electrical systems to power sources in accordance with applicable electrical requirements., • Use mechanical, electrical, and hydraulic conduit benders to complete installations., • Ensure electrical systems are properly grounded and installed according to applicable NEC requirements., • Use test meters, meggers, and other diagnostic equipment to test and troubleshoot electrical systems., • Consult with engineers, engineering technicians, line installers, industrial machinery mechanics, and other technical personnel when required., • Identify installation discrepancies and communicate required corrections to the appropriate personnel., • Inspect completed electrical work to ensure installations meet drawings, specifications, Panelmatic standards, and applicable codes., • Verify wiring, conduit, equipment, and components are installed correctly before requesting inspection., • Notify the appropriate Lead, Supervisor, or Inspector when work is ready for inspection, as applicable., • Assist with troubleshooting and correcting inspection findings., • Maintain a clean, organized, and safe work area throughout the workday., • Ensure tools, equipment, materials, and work areas are properly maintained and returned to their designated locations., • Follow all company safety policies, procedures, and required PPE requirements., • Promote a culture of safety and accountability among team members., • Assist leadership in monitoring project progress and identifying potential schedule concerns., • Help ensure materials and components are available when needed to maintain production flow., • Review work completed by team members and provide guidance when corrections are needed., • Assist with final electrical assembly, testing, and preparation for customer inspection or shipment., • Perform additional duties as assigned to support project completion and overall production goals. Requirements • Industrial Electrical Certification preferred, • 4+ years of experience in industrial electrical installation, electrical integration, industrial construction, or a related field., • Forklift certification preferred, • Experience in RIE and PEC Building preferred, • Experience in Electrical Racks preferred, • Extensive knowledge and comprehension of NEC and UL codes preferred, • Extensive knowledge of conduit bending preferred, • High school diploma or equivalent required, • Three plus years of experience in industrial electrical in a manufacturing environment required, • Three plus years of experience in the use basic tools (squares, clamps, fillet gauge, angle grinder, conduit bender, etc.) required, • Knowledge of NEC codes and comprehension of general electrical standard required, • Three plus years of experience in applicable QAPs (Quality Assurance Procedures) required, • Excellent communication skills both written and verbal required, • Ability to convert decimals to fractions and utilize conversion charts required, • Ability to read a tape measure and prints required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to stoop and bend required, • Ability to sit, stand, and walk for four plus hours at a time required, • Excellent color vision and eyesight required, • Alignment with company core values required Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid by Panelmatic for employee-only coverage, • 80% Panelmatic-paid / 20% employee-paid dependent coverage, • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and professional development, • PTO and paid holidays, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description The Electrician installs, maintains, and repairs electrical wiring, equipment, and fixtures. Ensures that work is in accordance with relevant codes. May install or service equipment or electrical control systems. Performs preventative maintenance duties as assigned by supervisor. Responds to breakdowns in a professional and timely manner. Assists with all aspects of new equipment installation. Evaluates, maintains, and modifies all equipment to ensure or improve production efficiency. Position Responsibilities May include: • Assist management with scheduling maintenance projects, work with contractors as needed, and maintain accurate and complete departmental records., • Read and interpret mechanical drawings, construction drawings, machine manuals, electrical blueprints/electrical schematics., • Ensure equipment adheres to all applicable safety requirements, tests electrical systems and continuity of circuits in electrical wiring., • Use test devices such as ohmmeters, voltmeters, oscilloscopes, to ensure compatibility and safety of systems., • Install and troubleshoot all systems including single or 3 phase, 120 volts to 480 volts. Install conduit and conduit support, pull wires and feeder cables, terminations, and install panels, switchgear, and transformers., • Perform established preventative maintenance programs., • Assist with all aspects of new equipment installation., • Prepare requisitions for parts and other equipment., • Assist with the development of preventative maintenance and work order program, and inventory control process., • Perform regular routine maintenance., • Ensure all equipment adheres to all applicable safety requirements., • Follow all safety protocols and maintain good housekeeping standards., • Perform additional projects/duties to support ongoing business needs. Nature & Scope • Possesses a broad theoretical job knowledge typically obtained through advanced education., • Has no discretion to deviate from established procedures by performing structured work assignments., • Work is closely supervised., • Problems faced are not typically difficult nor complex., • Explains facts, policies, and practices related to job area., • Works within well-defined instructions., • Uses established procedures and works under supervision to perform assigned tasks. Knowledge & Skills • “Advanced” skills in mechanical and electrical troubleshooting and repair., • Technically oriented ability., • Must have own maintenance tools, including 480 volt and 3 phase electric voltmeter, and able to use., • Effectively and safely operate various maintenance tools and equipment., • Ability to work with electrical circuits including 24-volt controls, 120-240 volt, single and three-phase service., • Capable of using programmable logic controllers to troubleshoot and repair equipment., • Ability to troubleshoot and read electrical blueprints., • Basic math analytical skills., • Ability to work under pressure and synthesize complex or diverse information., • Ability to get along well, communicate timely and accurately with co-workers and supervisors., • Must be able to read and understand written and verbal policy, instruction, and directions in English., • Must have basic MS Office skills – Outlook, Word, Excel., • Ability to multitask and work well with a team., • Safe work habits, following proper LOTO and other OSHA requirements., • Ability to apply good judgment, strong work ethics, and integrity on the job. Experience • 2+ years of experience with PLC systems, preferably Allen Bradley, Siemens, and Direct Logic., • 2+ years of experience with DC drives, servos, solenoids, photo eyes, relays, limit switches, and electric motors., • 2+ years industrial maintenance experience required., • Experience with pneumatic and hydraulic systems. Education/Certification • High School Diploma or GED equivalent preferred., • 4-year skilled Trades Apprenticeship or 8 years documented experience in trade required. People Management No Physical Requirements / Work Environment • Must be able to perform essential responsibilities with or without reasonable accommodations., • Manufacturing environment with forklift traffic., • Requires ability to stand for long periods up to 8 to 10 hrs., • Repetitive movement, good eye/hand coordination, operation of hand tools, and power tools., • Job may require standing (up to 90%), walking (up to 10%), stooping or bending, reaching, twisting, and turning., • May be required to lift, carry, and/or move up to 40 lbs. Reports To Department Manager, Department Supervisor, or Shop Lead The Company provides equal employment opportunity to all employees and applicants regardless of a person’s race, color, religion (including religious dress or grooming practices), creed, national origin (including language use restrictions), citizenship, uniform service member or veteran status, ancestry, disability, physical or mental disability (including HIV/AIDS), medical condition (including cancer and genetic characteristics), genetic information, request for protected leave, marital status, sex, pregnancy, age (over 40), sexual orientation, gender, gender identity or expression, political affiliation, or any other characteristic protected by law. The Company will comply with all federal and state regulations and statutes pertaining to individuals with disabilities.

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and experienced Lead Industrial Electrician to provide hands-on leadership and technical direction within our electrical integration team. The Lead Industrial Electrician will lead and support a team responsible for the electrical installation, wiring, and integration of equipment within custom metal buildings and enclosures. This position will ensure electrical installations are completed safely, accurately, and in accordance with engineering drawings, customer specifications, Panelmatic standards, and applicable NEC codes. The Lead Industrial Electrician will coordinate daily work activities, provide technical guidance to team members, inspect completed work, troubleshoot issues, and help ensure projects remain on schedule. The Lead Industrial Electrician will remain hands-on in the installation and integration process while serving as a technical resource and leader for the team. Job Duties: • Provide day-to-day direction, guidance, and technical support to Electrical Integration Technicians., • Help coordinate daily assignments and prioritize work based on project schedules and production requirements., • Lead by example and maintain high standards for safety, quality, productivity, and workmanship., • Train, coach, and mentor team members on electrical installation practices, tools, equipment, and Panelmatic standards., • Assist with onboarding and training new employees., • Monitor team progress and communicate project status, delays, material shortages, or technical concerns to the appropriate Supervisor or Production Manager., • Help identify and resolve production issues that could impact project schedules or quality., • Work closely with Engineering, Production, Quality, and other departments to resolve installation and technical issues., • Provide hands-on assistance with complex electrical installations and difficult integration tasks., • Consult blueprints, work orders, schematics, one-line diagrams, and engineering drawings to safely construct and integrate electrical systems., • Interpret customer specifications and engineering requirements to determine proper installation methods., • Perform and oversee conduit bending, threading, and installation, including EMT, RGS, and RAL., • Design and install conduit systems within space restrictions in accordance with one-line diagrams, NEC requirements, and customer specifications., • Install electrical panels, breakers, fuses, disconnects, and related electrical equipment., • Install and terminate electrical wiring, outlets, switches, junction boxes, terminal boards, and wall boxes., • Install electrical systems including security systems, fire detection systems, UPS systems, and other building or equipment systems., • Install fiber optic cable, communication lines, power systems, and other electrical infrastructure as required., • Install electrical components in buildings, machinery, computers, equipment, and custom enclosures., • Install heating and cooling electrical systems in industrial buildings and enclosures., • Install cable tray and open wiring systems., • Install utility fixtures, outlets, terminal boards, switches, and wall boxes using appropriate hand and power tools., • Cut openings and drill holes for fixtures, outlet boxes, fuse holders, panels, and other electrical components., • Measure, cut, and install frameworks and supports for conduit, control panels, junction boxes, and other electrical devices., • Connect electrical systems to power sources in accordance with applicable electrical requirements., • Use mechanical, electrical, and hydraulic conduit benders to complete installations., • Ensure electrical systems are properly grounded and installed according to applicable NEC requirements., • Use test meters, meggers, and other diagnostic equipment to test and troubleshoot electrical systems., • Consult with engineers, engineering technicians, line installers, industrial machinery mechanics, and other technical personnel when required., • Identify installation discrepancies and communicate required corrections to the appropriate personnel., • Inspect completed electrical work to ensure installations meet drawings, specifications, Panelmatic standards, and applicable codes., • Verify wiring, conduit, equipment, and components are installed correctly before requesting inspection., • Notify the appropriate Lead, Supervisor, or Inspector when work is ready for inspection, as applicable., • Assist with troubleshooting and correcting inspection findings., • Maintain a clean, organized, and safe work area throughout the workday., • Ensure tools, equipment, materials, and work areas are properly maintained and returned to their designated locations., • Follow all company safety policies, procedures, and required PPE requirements., • Promote a culture of safety and accountability among team members., • Assist leadership in monitoring project progress and identifying potential schedule concerns., • Help ensure materials and components are available when needed to maintain production flow., • Review work completed by team members and provide guidance when corrections are needed., • Assist with final electrical assembly, testing, and preparation for customer inspection or shipment., • Perform additional duties as assigned to support project completion and overall production goals. Requirements • Industrial Electrical Certification preferred, • 4+ years of experience in industrial electrical installation, electrical integration, industrial construction, or a related field., • Forklift certification preferred, • Experience in RIE and PEC Building preferred, • Experience in Electrical Racks preferred, • Extensive knowledge and comprehension of NEC and UL codes preferred, • Extensive knowledge of conduit bending preferred, • High school diploma or equivalent required, • Three plus years of experience in industrial electrical in a manufacturing environment required, • Three plus years of experience in the use basic tools (squares, clamps, fillet gauge, angle grinder, conduit bender, etc.) required, • Knowledge of NEC codes and comprehension of general electrical standard required, • Three plus years of experience in applicable QAPs (Quality Assurance Procedures) required, • Excellent communication skills both written and verbal required, • Ability to convert decimals to fractions and utilize conversion charts required, • Ability to read a tape measure and prints required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to stoop and bend required, • Ability to sit, stand, and walk for four plus hours at a time required, • Excellent color vision and eyesight required, • Alignment with company core values required Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid by Panelmatic for employee-only coverage, • 80% Panelmatic-paid / 20% employee-paid dependent coverage, • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and professional development, • PTO and paid holidays, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and experienced Wiring Technician Lead to provide hands-on leadership and technical support within our wiring department. The Lead Wiring Technician will lead and support a team of Wiring Technicians in the assembly and wiring of custom electrical control panels while ensuring work is completed safely, accurately, and according to engineering drawings, project specifications, and Panelmatic standards. This role is responsible for helping coordinate daily work, providing technical guidance, inspecting completed work, troubleshooting wiring issues, and supporting the team in meeting project schedules and quality requirements. The Lead Wiring Technician will work closely with Production Supervisors, Engineering, and other team members to ensure projects are completed correctly and efficiently. Job Duties: • Lead and provide day-to-day direction and technical support to Wiring Technicians., • Review engineering drawings, wiring diagrams, schematics, and project specifications to determine assembly and wiring requirements., • Help assign and prioritize daily work based on project schedules and production needs., • Layout, measure, drill, and tap subpanels for initial assembly preparation., • Install DIN rail, equipment, SEL relays, lockout relays, test switches, terminal blocks, nameplates, wire duct, and other electrical components., • Cut, tag, route, and terminate wires according to project drawings and Panelmatic standards., • Inspect wiring and panel assemblies to ensure proper routing, labeling, termination, workmanship, and overall quality., • Troubleshoot wiring issues and assist technicians in resolving assembly and electrical discrepancies., • Identify drawing, material, or production issues and communicate them to the appropriate Supervisor or Engineering team., • Train and mentor Wiring Technicians on proper wiring techniques, tools, equipment, safety practices, and Panelmatic standards., • Provide hands-on assistance with complex or difficult wiring and panel assembly tasks., • Alter and cut steel, plastic, and other materials as required for panel fabrication and assembly., • Ensure work is completed in accordance with applicable safety requirements, quality standards, and project specifications., • Monitor progress and communicate project status, delays, material shortages, or other concerns to production leadership., • Help maintain an organized, clean, and safe work area., • Support testing, inspection, and final quality checks as needed., • Assist with onboarding and training new Wiring Technicians., • Promote teamwork, accountability, and a positive work environment., • Perform additional duties as needed to support project schedules, production goals, and overall department operations. Requirements • High school diploma or equivalent preferred., • 3+ years of experience in electrical panel wiring, electrical assembly, industrial wiring, or a related manufacturing environment., • Previous lead, senior technician, or informal leadership experience preferred., • Ability to read and interpret electrical schematics, wiring diagrams, engineering drawings, and assembly instructions., • Strong understanding of electrical panel assembly and wiring practices., • Experience using hand tools, power tools, wire strippers, crimpers, drills, and other electrical assembly equipment., • Ability to accurately measure, cut, route, label, and terminate electrical wiring., • Strong attention to detail and commitment to quality., • Ability to troubleshoot wiring and assembly issues., • Ability to communicate effectively with technicians, supervisors, engineering, and other departments., • Ability to provide direction, training, and support to less-experienced team members., • Ability to work independently while also functioning effectively as part of a team., • Ability to prioritize tasks and help keep projects on schedule. Benefits Benefits: • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401K Retirement, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description Quietflex Manufacturing, a member of Daikin Industries LTD. is seeking a professional, skilled Electrician - 3rd shift. Quietflex Manufacturing is the leading manufacturer and supplier of flexible ductwork for residential and commercial HVAC systems, as well as fiberglass mats for industrial applications. As a vital component of indoor comfort, Quietflex Manufacturing has a robust line that includes a wide variety of specialized products designed to provide the best solutions to the needs of its many customers. Summary: The Electrician installs, maintains, and repairs electrical wiring, equipment, and fixtures. Ensures that work is in accordandace with relevant codes. May install or service equipment or electrical control systems. Performs preventative maintenance duties as assigned by supervisor. Responds to breakdowns in a professional and timely manner. Assists with all aspects of new equipment installation. Evaluates, maintains, and modifies all equipment to ensure or improve production efficiency. Why work with us? • Benefits are effective on day one for all full-time direct hires., • Training programs are available to help guide team members and develop new skills., • Growth Opportunities - there are immense opportunities to grow your career., • You will be part of a Global Company - our family brands are backed by Daikin Industries, LTD. Position Responsibilities May include: • Assist management with scheduling maintenance projects, work with contractors as needed, and maintain accurate and complete departmental records., • Read and interpret mechanical drawings, construction drawings, machine manuals, electrical blueprints/electrical schematics., • Ensure equipment adheres to all applicable safety requirements, tests electrical systems and continuity of circuits in electrical wiring., • Use test devices such as ohmmeters, voltmeters, oscilloscopes, to ensure compatibility and safety of systems., • Install and troubleshoot all systems including single or 3 phase, 120 volts to 480 volts. Install conduit and conduit support, pull wires and feeder cables, terminations, and install panels, switchgear, and transformers., • Perform established preventative maintenance programs., • Assist with all aspects of new equipment installation., • Prepare requisitions for parts and other equipment., • Assist with the development of preventative maintenance and work order program, and inventory control process., • Perform regular routine maintenance., • Ensure all equipment adheres to all applicable safety requirements., • Follow all safety protocols and maintain good housekeeping standards., • Perform additional projects/duties to support ongoing business needs. Nature & Scope • Possesses a broad theoretical job knowledge typically obtained through advanced education., • Has no discretion to deviate from established procedures by performing structured work assignments., • Work is closely supervised., • Problems faced are not typically difficult nor complex., • Explains facts, policies, and practices related to job area., • Works within well-defined instructions., • Uses established procedures and works under supervision to perform assigned tasks. Knowledge & Skills • “Advanced” skills in mechanical and electrical troubleshooting and repair., • Technically oriented ability., • Must have own maintenance tools, including 480 volt and 3 phase electric voltmeter, and able to use., • Effectively and safely operate various maintenance tools and equipment., • Ability to work with electrical circuits including 24-volt controls, 120-240 volt, single and three-phase service., • Capable of using programmable logic controllers to troubleshoot and repair equipment., • Ability to troubleshoot and read electrical blueprints., • Basic math analytical skills., • Ability to work under pressure and synthesize complex or diverse information., • Ability to get along well, communicate timely and accurately with co-workers and supervisors., • Must be able to read and understand written and verbal policy, instruction, and directions in English., • Must have basic MS Office skills – Outlook, Word, Excel., • Ability to multitask and work well with a team., • Safe work habits, following proper LOTO and other OSHA requirements., • Ability to apply good judgment, strong work ethics, and integrity on the job. Experience • 2+ years of experience with PLC systems, preferably Allen Bradley, Siemens, and Direct Logic., • 2+ years of experience with DC drives, servos, solenoids, photo eyes, relays, limit switches, and electric motors., • 2+ years industrial maintenance experience required., • Experience with pneumatic and hydraulic systems. Education/Certification • High School Diploma or GED equivalent preferred., • 4-year skilled Trades Apprenticeship or 8 years documented experience in trade required. People Management No Physical Requirements / Work Environment • Must be able to perform essential responsibilities with or without reasonable accommodations., • Manufacturing environment with forklift traffic., • Requires ability to stand for long periods up to 8 to 10 hrs., • Repetitive movement, good eye/hand coordination, operation of hand tools, and power tools., • Job may require standing (up to 90%), walking (up to 10%), stooping or bending, reaching, twisting, and turning., • May be required to lift, carry, and/or move up to 40 lbs. Reports To Department Manager, Department Supervisor, or Shop Lead Qualified Applicants must be legally authorized for employment in the United States. Qualified applicants will not require employer sponsored work authorization now or in the future for employment in the United States. The Company provides equal employment opportunity to all employees and applicants regardless of a person’s race, color, religion (including religious dress or grooming practices), creed, national origin (including language use restrictions), citizenship, uniform service member or veteran status, ancestry, disability, physical or mental disability (including HIV/AIDS), medical condition (including cancer and genetic characteristics), genetic information, request for protected leave, marital status, sex, pregnancy, age (over 40), sexual orientation, gender, gender identity or expression, political affiliation, or any other characteristic protected by law. The Company will comply with all federal and state regulations and statutes pertaining to individuals with disabilities.

Job DescriptionOverview We are seeking a skilled Plasma and Brake Press Operator to join our dynamic team in Houston, TX. In this role, you will play a crucial part in our manufacturing process, ensuring precision and quality in metal fabrication. If you have a passion for operating machinery and a keen eye for detail, we want to hear from you! Responsibilities • Set up and operate plasma cutting machines and brake presses according to specifications., • Read and interpret blueprints, technical drawings, and work orders to determine job requirements., • Monitor machine operations to ensure quality and efficiency, making adjustments as necessary., • Conduct routine maintenance and troubleshooting on equipment to minimize downtime., • Maintain a clean and safe work environment, adhering to all safety protocols and regulations., • Collaborate with team members to optimize production processes and improve workflow., • Document production data and report any issues to the supervisor promptly. Qualifications, • High school diploma or equivalent; technical training in machining or fabrication preferred., • Proven experience as a Plasma and Brake Press Operator or in a similar role., • Strong understanding of metal fabrication processes and machinery., • Ability to read and interpret technical documents and blueprints., • Excellent attention to detail and problem-solving skills., • Ability to work independently and as part of a team in a fast-paced environment., • Familiarity with safety standards and practices in a manufacturing setting. You should be proficient in: • Equipment Troubleshooting, • Troubleshooting Skills, • CNC Machine Setup & Changeover, • Precision Measurement & Hand Metrology, • Precision Measurement & Inspection, • Shop Math Skills, • Blueprint Reading Machines & technologies you'll use: • Press Brake, • CNC Plasma Cutter

Job Description Job Purpose The Entry Operator shall operate in the functions with supplying mill with slit coil material for the continuous operation of the mill in accordance with plant policies and procedures. He/she will ensure a safe and compliant operation during his/her shift. Duties & Responsibilities • Entry Operator must report to immediate supervisor for briefing on daily tasks., • Entry Operator to check slit coils for correct heat and slit numbers in accordance to the correct order of the run sheet., • Entry Operator to inspect the condition of slit and document findings in ERP system., • Operators should communicate any quality issues with slit condition to mill operator., • Check that all machinery is properly serviced before starting up., • Assists in repair and replacement of equipment during maintenance shutdowns., • Communicate with crew to achieve a quality product., • Assist in changeovers and Mill stops., • Communicating to Lead or Supervisor any problems with material or equipment., • Must maintain good housekeeping ethics. Work areas must be free and clear of debris., • Assist in the verification and recording of production and findings in the ERP System and/or required documents., • Other duties assigned. Qualifications / Competencies • Education: o A High School diploma or GED preferred but not required. o 1year pipe mill experience preferred. o Basic reading, writing, and arithmetic skills required. o Manual dexterity required for operating machinery, hand tools and handheld technical devices. o Knowledge of the manufacturing processes and procedures is a plus. o Ability to lift to 30 pounds required. o Employees must be able to work with a flexible schedule, which may require overtime. • Job Knowledge: o Knowledge of the manufacturing processes, procedures, and Overhead Crane operation. • Personal Competencies: o Excellent verbal and written communication skills. o Excellent computer skills • Safety: o Understands all applicable location safety rules and regulations and makes sure that all are being followed. Physical Requirements & Working Conditions • Working conditions are normal for a manufacturing environment., • Operation requires the use of personal protective equipment (PPE) to include but not limited to eye safety glasses, work boots, and hardhats., • The work involves lifting materials and product up to 30 pounds., • The ability to work in loud, hot environments/extreme weather while wearing required PPE., • Loose-fitting clothes and jewelry are not permitted., • The ability to respond quickly to sounds., • The ability to see and respond to dangerous situations., • The ability to see 20-20 when corrected.

Job DescriptionPOSITION SUMMARY The Threader is responsible for safely setting up and operating threading equipment to produce threaded steel products according to sales orders, routers, drawings, and established quality requirements. The position performs machine setup, material verification, threading operations, dimensional inspections, material handling, production documentation, and routine equipment care while maintaining safety, quality, and production standards. ESSENTIAL DUTIES & RESPONSIBILITIES • Inspect threading machines, guards, emergency stops, tooling, and equipment before use., • Review sales orders, routers, drawings, and work instructions to determine job requirements., • Verify material heat number, diameter, type, and grade before processing., • Set up, adjust, and safely operate threading machines according to established procedures., • Properly position and secure material before beginning threading operations., • Perform first-piece and required in-process inspections to verify thread dimensions and tolerances., • Use calibrated measuring equipment, including calipers, micrometers, pitch micrometers, tape measures, and applicable gauges., • Identify defective or nonconforming threads and report quality or machine issues to the Supervisor or Quality Control., • Accurately complete Routers, inspection records, SPC documentation, and other required production records., • Maintain proper material identification and traceability throughout the threading process., • Safely stage and move steel materials using approved material-handling methods and equipment., • Operate overhead cranes and rigging equipment only when properly trained, certified, and authorized., • Maintain threading machines, tools, and work areas in a clean and orderly condition., • Perform basic equipment care and cleaning within the employee's level of training and authorization., • Immediately report equipment deficiencies, unsafe conditions, incidents, injuries, and near misses.SAFETY RESPONSIBILITIES, • Follow all company safety policies, procedures, Job Hazard Analyses, and safe work practices., • Wear all required Personal Protective Equipment (PPE)., • Follow machine guarding and Lockout/Tagout requirements., • Never touch or adjust material or machine components while they are rotating or in motion., • Keep loose clothing, jewelry, gloves, and other items away from rotating equipment and material where entanglement hazards exist., • Use emergency stops when necessary and wait until equipment has completely stopped before making adjustments., • Operate only equipment for which the employee has been properly trained and authorized.QUALIFICATIONS & TRAINING, • Complete required new-hire, HSE, and Threader-specific training., • Demonstrate the ability to safely set up and operate threading equipment., • Ability to read and understand work orders, Routers, drawings, and production instructions., • Ability to use applicable measuring and inspection equipment., • Basic understanding of thread dimensions, specifications, and tolerances., • Ability to identify defective or nonconforming products., • Complete supervised hands-on training and demonstrate competency before independent machine operation., • Maintain required crane or equipment certifications when applicable.PERFORMANCE EXPECTATIONS The Threader is expected to consistently demonstrate safe work practices, produce material within required specifications, complete accurate inspections and documentation, maintain acceptable productivity, properly care for equipment, maintain good housekeeping, and comply with company policies and procedures. PHYSICAL & WORK ENVIRONMENT Work is performed in an industrial steel manufacturing environment around powered machinery, rotating equipment, steel materials, cranes, tools, and material-handling equipment. The position may require prolonged standing, bending, reaching, handling materials and tools, and working in areas with industrial noise and moving equipment. Night Shift

Job Description General Assembler Performs duties under the direction of area supervisor and/or lead man in assigned department. This could include the following departments. • Assembly, • Paint, • Fabrication, • Doors Final Assembly Essential job functions: • Plays key role in department metrics including safety; cost; quality and delivery., • Verifies conformance of finished goods., • Ensures quality in every task performed., • Builds product to design specification utilizing drawings., • Maintains a clean and safe work environment., • Adheres to all company general and safety policies. Marginal job functions: • Perform other tasks as assigned by supervisor Knowledge, skills and abilities: • Ability to carry out not only simple but complex oral and written instructions., • basic math skills, • Ability to read and understand English sufficiently., • Ability to operate hand tools including but not limited to drills; grinders; heat guns; rivet guns., • Ability to comprehend additional training in relation to the performing of the work duties., • Ability to cross train and perform many different tasks across multiple departments., • High level of attentiveness and physical coordination to perform the work activities safely and productively. Physical demands: Most of the work tasks are performed in-door and subjected to environmental and weather condition changes. Hours: 8 or more hours per day Week: 40 or more Lunch: Half hour. Sitting/standing: Stands 100 % of the time Environment: Shop is not air-conditioned Stress: Medium Physical task: Must bend, squat, lift, push or pull material up to 50 lbs frequently. Qualifications Standards: • Prior experience in a fast paced manufacturing environment is preferred. Performance Standards: The criteria for evaluation in this position include, but are not limited to, the following: • The ability to communicate effectively with and work with other personnel., • Proper operation of equipment., • Visual observation and periodic verification. Job Posted by ApplicantPro

Job Description About Metrix Metrix is a global leader in industrial condition monitoring and machinery protection solutions. Headquartered in Houston, Texas, we serve customers in more than 40 countries through direct sales and service professionals, along with a strategic network of instrumentation partners. For over 50 years, we have helped leading manufacturers and operators protect critical rotating and reciprocating machinery used in power generation, oil & gas, manufacturing, and other industrial applications. Our innovative products are trusted worldwide for their reliability, simplicity, and performance. Position Summary Perform any combination of the following duties to assemble parts of various materials. Assemble parts in specified relationship to each other, using hand, hand tools, or bench test equipment to meet required quantity and quality parameters. Package products as required for shipping. RESPONSIBILITIES: • Follows detailed assembly instructions and processes., • Performs machine setup where applicable; runs machines and processes., • Follows Quality Policy and Procedures, OSHA guidelines and regulations governing workplace safety., • Trains other employees on job functions and safety requirements, as needed., • Performs other duties as requested by team lead and supervisor., • Participation in Continuous Improvement process, • Participation in Near Miss program, • Must remain up to date on all training (i.e. safety, 5’S ) Additional Responsibilities: • Follow all company Quality, Health, Safety and Environmental policies and procedures., • Respond to change productively and handle other duties as required., • Work independently and employ effective time management skills., • Over-time as required. QUALIFICATIONS: Knowledge & Skills: • Assembly, Testing., • Ability to work independently and as part of a team., • Good communication (written and oral) and interpersonal skills., • Must be a self-starter., • Strong organizational skills., • Demonstrated problem-solving skills., • Working knowledge of manufacturing processes and equipment., • Ability to read and interpret technical drawings and prints., • Ability to read, understand, and follow relevant assembly, testing, and QMS procedures. Education Minimum Requirements/Equivalent: • High School degree or equivalent. Experience: • Minimum 2 years experience with manufacturing processes and electronic soldering experience WORKING CONDITIONS: Individual will generally be working in the production area. Noise levels encountered will vary from heavy machining to minimum noise level. Likewise, individual may be exposed to fumes from chemicals, paints, and assembly glues in the manufacturing areas. Please refer to the MSDS Notebook in this department for specific details regarding chemical exposure. PHYSICAL REQUIREMENTS: This position requires frequent standing, walking, sitting, balancing, stooping, kneeling, crouching, and crawling activities. In addition, there is frequent reaching and climbing of stairs. There is pushing and lifting / carrying of boxes weighing 35 lbs. Average vision and hearing is sufficient. Disclaimer: The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Privacy We are committed to the protection and promotion of your privacy. In connection with your application for employment with us at Metrix, please click on this link to view our Applicant Privacy Notice. (metrixvibration.com) Metrix is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job DescriptionDescription: Assembly Associate Job Description COMPANY OVERVIEW AlpHa Measurement Solutions is a liquid sensor technology platform serving the complex testing needs of water quality, pharmaceutical, laboratory, and industrial markets with an unmatched combination of precision, reliability, innovation, and flexibility. We are a vertically integrated manufacturer, creating thousands of units and processing several hundred orders and shipments each day for customers throughout the world. We approach the market as both an OEM manufacturer and with our own brands: Van London, ANDalyze, and Aurora Scientific Instruments Our company has over 100 years of liquid sensing experience and is accelerating growth through its recent acquisition by Enpro Inc. (NYSE: NPO). Enpro is a leading industrial technology company manufacturing high-performance proprietary products for the semiconductor, aerospace, and compositional analysis sectors. Enpro companies employ nearly 4,000 associates globally, while AlpHa’s team consists of over 350 employees, including 235 team members in Houston, Texas and 120 in Shanghai, China. Our global headquarters is conveniently located in Houston at the southwest intersection of I-69 and Sam Houston Tollway, just north of Sugar Land. WHAT MAKES ALPHA MEASUREMENT SOLUTIONS SPECIAL At AlpHa Measurement Solutions, we make analytical sensors and instruments that are essential to everyday life. What we do matters; our products are used to test and monitor water quality in industrial, health, and safety applications worldwide. Our sensors are critical for wastewater and drinking water processing, environmental monitoring, pharmaceutical (vaccine) manufacturing, food & beverage supply, power generation, and many other fundamental applications. Municipalities, multinational organizations, and system integrators rely upon our sensors as critical, consumable components of their systems around the globe. We at AlpHa understand the important role we play in ensuring safe drinking water, clean aqueous environments, and the general health and safety of communities worldwide. BENEFITS & PERKS · Medical, Dental & Vision Insurance · Health Savings Accounts (HSAs) · Short-Term Disability · 401k · Life insurance · Paid Vacation · 8 Paid Holidays per year · Paid Jury Duty Leave · Recognition and Reward Programs · Diverse & Inclusive Work Culture Position Summary The Assembly Associate performs all tasks involved in the production of the company’s products. This includes fabrication, filling, sub-assembly, soldering, potting, final assembly, testing, screening, packaging, and packing to established methods and work instructions. The position follows standard work methods and practices safe work habits to ensure production is as efficient and safe as possible. Essential Functions Reasonable accommodation may be made to enable individuals with disabilities to perform the following essential functions: • Read routing and perform work as assigned by department supervisor, • Assemble units per specifications or work instructions, by product number and product type, • Fabricate or modify parts, using provided shop equipment and tools, • Attach appropriate labels to wires, products and packages, • Test product functional performance to ensure conformance to specifications before passing to next operation, • Record any defects or other data as requested by supervisors or managers, • Where applicable, understand serialized processes and trace data through products serial number, • Pack finished goods into correct packages and boxes, • Notify supervisor of any mechanical or material issues, • Maintain a clean and safe work area, • Performs other duties as required and assigned; duties and activities may change over time Required Key Competencies • Ability to Work Quickly and Methodically, • Thoroughness and Attention to Details, • Ability to Follow Instructions, • Willingness to Work Flexibly, • Teamwork Orientation, • Technical Capacity Work Environment While performing the duties of this job, the employee may be exposed to fumes or airborne particles, various temperatures, and moving mechanical equipment. Physical Demands While performing the duties of this job, the employee is required to talk or hear. The position requires the ability to concentrate while doing repetitive tasks. The employee is required to sit, stand, walk, use hands and fingers to handle or feel, and reach with hands and arms. EEO AND CULTURE STATEMENT: AlpHa Measurement Solutions is a subsidiary of Enpro, a leading industrial technology company focused on critical applications across many end-markets, including semiconductor, industrial process, commercial vehicle, sustainable power generation, aerospace, food and pharma, photonics and life sciences. At Enpro, we believe that diversity drives innovation and inclusion fosters growth. We are committed to creating a workplace where everyone feels valued and respected. Our employment decisions are based on merit, qualifications, and business needs, without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, marital status, military service, or any other status protected by applicable law. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Human Resources, and we will make all reasonable efforts to accommodate your request. *Enpro Inc. is an equal opportunity employer. Legal authorization to work in the United States is required. We will not sponsor employment visas now or in the future for this job. Requirements: Required Qualifications and Experience High school diploma or GED Preferred Previous production experience Previous experience in production of electrochemical or electronic equipment a plus Must be able to routinely lift 25 pounds Must be able to work in fast-paced environments Occasional overtime to meet business needs Must be conversant in English for safe and effective performance of the job Must be eligible to work in the U.S.

Job DescriptionDescription: Come join the largest independent Medical Waste Service Provider in the country for an exciting position! We provide excellent customer service to local hospitals and healthcare professionals and represent one of the most prominent companies in the Medical Waste Industry. Join an economically stable industry that offers long-term career development across 35+ locations. The Assembler position is responsible for assembling, preparing, inspecting, and packaging corrugated and plastic products in accordance with company quality and safety standards. This role supports daily production operations by assembling products to required specifications, performing quality checks, preparing completed products for shipment, and maintaining a clean and safe work environment. Key Responsibilities • Assemble, stuff, tape, and prepare corrugated and plastic products according to specifications., • Read and follow assembly instructions, product kits, and production documentation., • Conduct quality checks on completed products and inspect team members’ work as needed., • Lift, palletize, and prepare completed products for storage or shipment., • Safely operate pallet jacks to move materials, products, and completed pallets., • Use stretch wrap to secure pallets and approved tools to open boxes or cut plastic wrap and straps., • Assist with hand-unloading trucks and stacking incoming materials onto pallets as needed., • Handle products and materials weighing approximately 17–25 pounds., • Maintain a clean, organized, and safe work area, including proper disposal of production waste., • Follow all production, quality, and safety procedures; report defects, shortages, or other concerns to a supervisor., • Perform additional duties as assigned.Requirements:, • High school diploma or GED preferred; production, assembly, warehouse, packaging, or manufacturing experience preferred., • Ability to read and follow assembly instructions, work packets, and product specifications., • Ability to complete repetitive assembly and packaging tasks accurately in a fast-paced environment., • Strong attention to detail and commitment to product quality., • Ability to safely use basic production and material-handling equipment, including box cutters, pallet jacks, and stretch wrap., • Ability to work independently and collaboratively while following company safety, quality, and operational procedures., • Ability to stand for extended periods and perform repetitive physical work, including bending, reaching, lifting, carrying, pushing, and pulling., • Ability to regularly lift and handle materials up to 50 pounds and assist with truck unloading and palletizing as needed., • Must successfully complete all required pre-employment screenings. Why Join Sharps Sharps Medical Waste Services offers a mission-driven, collaborative environment where employees contribute directly to meaningful operational impact. In this role, you will play a central part in maintaining financial integrity, supporting audits, and enabling data-driven decisions that help Sharps grow and scale responsibly. You will gain exposure to cross-functional operations and the opportunity to help implement innovative finance processes. EEO Statement Sharps Medical Waste Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Job Overview: Ready to combine hands-on controls expertise with team leadership? Marvin is hiring a Custom Equipment Programming Group (CEPG) Controls Team Supervisor to guide the Controls team while continuing to perform controls work. In this role, you’ll lead, mentor, and coordinate the work of Controls Technicians, helping the team complete projects successfully and on time. You’ll also partner with specialists in supervisory control and data acquisition (SCADA), database systems, and programmable logic controllers (PLC) to integrate sophisticated automated manufacturing equipment. You’re an exceptional candidate if you bring strong controls and troubleshooting experience, a collaborative leadership approach, and the ability to manage projects while empowering team members to take ownership of their work. If you’re looking for a new role that provides opportunity to grow within a supportive team, we invite you to apply today. This job is located in Fargo, ND. If you're considering relocating to Fargo, you may be eligible for a relocation benefit package to assist with your move. Marvin offers an extensive relocation benefit package that includes the movement of your household goods, temporary housing, and much more - in addition to a relocation counselor to assist you throughout the entire journey. Highlights of your role: • Provide direction for the Controls group while continuing to execute controls work, collaborating with Automation Systems, Maintenance, Information Systems, and Operations., • Support team leadership activities, including interviewing candidates, training employees, planning work, balancing workloads, delegating assignments, evaluating work, addressing concerns, and resolving problems., • Research, analyze, install, and test automation control systems to improve machine efficiency, advance existing systems, and support current and future production demands., • Diagnose and resolve electrical, mechanical, pneumatic, and programming-related equipment and facility issues. Recommend preventive maintenance rule sets for recurring issues and identify opportunities to improve operational procedures., • Manage projects and timelines through successful completion or resolution while maintaining feedback loops and providing end-user training., • Serve as a liaison with vendors to ensure new and modified equipment, control panels, wiring schematics, components, and electrical practices align with Marvin specifications and procedures. Build collaborative relationships across functional departments. You're a good fit if you have (or if you can):, • Working knowledge of manufacturing software, including ICIM, and Microsoft Office Suite, • Experience with PLC and operator interface programming languages, • Familiarity with standard networking technologies and hardware, • Knowledge of SCADA, automation control systems, and related components, • Knowledge of data communication protocols, industrial protocols, and computer operating systems such as Microsoft Windows and Unix/Linux Also want to make sure you have:, • A four-year degree, one to two years of related experience or training, or an equivalent combination of education and experience, • Experience working in a manufacturing environment, • Project management skills and the ability to execute work according to established timelines, • Strong, proactive communication, training, and mentoring skills, • The ability to create a collaborative team environment and empower others to take ownership of assigned work We invite you to See Yourself at Marvin: From people to products, Marvin is committed to creating better ways of living. When you join this family-owned and -led window and door company, you belong to a community full of opportunities. For more than a century, we’ve been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin’s quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. We take a better living approach with benefits to support you at work and beyond. From day one, you will enjoy health insurance, paid holidays, paid parental leave, a 401(k) retirement savings match and more! Some of our unique and most popular benefits include: • $300 annual wellbeing account to spend on what helps you feel happy + healthy, • Better Living Day! (a paid day off to go have some fun), • Annual profit sharing – recognizing everyone’s contribution to Marvin’s success, • Giving at Marvin – participate in organized volunteer opportunities, • Brighter Days Fund – financial support from your colleagues and the Marvin family during personal hardships Join the more than 8,000 Marvin team members to experience these benefits and more. Apply today! Marvin is an Equal Opportunity Employer: Marvin is committed to creating an inclusive environment for all employees and applicants. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable laws. Applicants requiring reasonable accommodation for any part of the application and hiring process may contact us at _.

Job Description Electromechanical Assembler – Power Distribution Equipment Job Type: Full-Time Pay Rate: $20.00–$23.00 per hour, depending on experience Schedule: Monday–Friday; overtime as needed Position Summary We are seeking an experienced Electromechanical Assembler to join our manufacturing team. This position is responsible for assembling electrical and mechanical components used in switchboards, switchgear, power banks, power distribution equipment, and electrical power units. The ideal candidate has hands-on experience with mechanical and electrical assembly, can read basic electrical drawings and schematics, and is comfortable using hand tools, power tools, torque wrenches, and measuring equipment. Essential Responsibilities • Assemble electrical and mechanical components for switchboards, switchgear, power banks, and electrical power units., • Read and interpret blueprints, engineering drawings, assembly drawings, wiring diagrams, schematics, and work instructions., • Install and route electrical wiring, cables, connectors, terminals, switches, fuses, breakers, relays, bus bars, panels, and other components., • Perform mechanical assembly using hand tools and power tools., • Use torque wrenches and other measuring equipment to ensure components are installed to specifications., • Measure, cut, strip, crimp, terminate, and route wires and cables as required., • Follow wiring diagrams and electrical schematics to correctly connect components., • Identify and verify electrical components, hardware, wire sizes, labels, and connection points., • Perform basic quality inspections throughout the assembly process., • Verify proper fit, alignment, wiring, torque, and overall workmanship., • Follow Bills of Materials (BOMs), engineering changes, work orders, and production instructions., • Maintain a clean and organized work area and follow all safety procedures., • Work efficiently to meet production schedules and quality requirements., • Communicate assembly issues, missing components, or drawing discrepancies to the appropriate supervisor or lead., • Perform other related assembly duties as assigned. Required Qualifications • 1–2+ years of experience in electromechanical assembly, electrical assembly, manufacturing, switchgear, switchboards, power distribution equipment, control panels, or a related field., • Ability to read and understand basic electrical schematics, wiring diagrams, blueprints, and assembly drawings., • Experience using hand tools and power tools., • Experience with wire preparation, crimping, terminating, and cable routing preferred., • Ability to use a torque wrench, tape measure, calipers, and other basic measuring tools., • Basic understanding of electrical components such as:, • Fuses, • Breakers, • Switches, • Relays, • Connectors, • Terminals, • Wiring and cables, • Bus bars, • Panels and enclosures, • Strong attention to detail and commitment to quality., • Ability to follow written work instructions and production procedures. Physical Requirements • Ability to stand for extended periods during the workday., • Ability to regularly bend, reach, stoop, and work in various positions., • Ability to lift and move materials or components weighing up to 50 pounds., • Ability to wear required PPE, including safety glasses, gloves, safety footwear, and other equipment as required., • Ability to work overtime when required to meet production schedules. Preferred Experience Experience with any of the following is a plus: • Switchgear or switchboard assembly, • Power distribution equipment, • Electrical power units, • Power generation equipment, • Control panel assembly, • Industrial electrical assembly, • Wiring harness assembly, • Electrical enclosures, • Bus bar installation, • Cable assembly and termination, • UL-listed electrical equipment, • Manufacturing or industrial production environments Ideal Candidate The successful candidate is a hands-on assembler who is comfortable working with both electrical and mechanical components. They should be able to look at a drawing or schematic, identify the required components, use the appropriate tools, and complete an assembly accurately according to specifications. Electrical assembly experience and the ability to read basic schematics are strongly preferred.

Job Description Job Title Electro-Mechanical Assembler Department Production Reports To Production Supervisor or Assembly Lead Summary Build, wire, inspect, and rework electro-mechanical assemblies for BPM products. Work from drawings, BOMs, schematics, and work orders to deliver quality products on schedule in a safe, ESD-controlled production environment. Core Responsibilities • Perform electro-mechanical assembly to procedures, assembly drawings, and engineering documentation., • Assemble and wire electrical assemblies such as control panels and sub-assemblies; lay out and build wiring harnesses and install electronic components., • Follow complex wiring diagrams, electrical and mechanical schematics, BOMs, and work orders to assemble equipment accurately., • Drill, tap, and mount hardware and components using hand and power tools as specified on the print., • Complete work orders and production paperwork accurately and on time., • Escalate safety, quality, and manufacturing issues to the supervisor promptly; stop work when a risk is unclear., • Perform in-process and final quality checks so the product meets BPM quality standards., • Rework and repair assemblies to engineering change orders and approved methods, including soldering and desoldering., • Follow ESD/anti-static, quality, and safety procedures at all times., • Identify product defects, quarantine nonconforming material when required, and complete appropriate documentation., • Support a clean, organized work cell (5S) and continuous improvement on first-pass yield and scrap when asked. Required Qualifications • High school diploma or GED; some college, trade training, or military experience preferred., • About five years in an industrial or electronics manufacturing environment, or equivalent demonstrated skill., • Hands-on experience with electrical assembly, soldering and desoldering, and reading electrical and mechanical schematics and assembly drawings., • Working knowledge of ESD/anti-static practice, DC and stepper motors, pneumatics, linear bearings, encoders/sensors, and computer assembly or troubleshooting., • Able to use a digital multimeter and oscilloscope (or equivalent test tools) for basic checks., • Skillful with common hand tools (screwdrivers, wrenches, pliers, drill press, soldering iron)., • Able to read, write, and communicate in English for work instructions and safety communication., • Able to lift and carry up to 40 pounds; stand for a full shift; available Monday through Friday, 7:00 a.m. to 4:00 p.m., plus overtime and occasional Saturdays as needed., • Must pass background check and drug screen as required by company policy. Preferred Qualifications • IPC soldering certification or equivalent., • Prior experience with control-panel builds, cable harnesses, or precision mechanical fit-up., • Basic computer skills for work-order systems and viewing drawings. \nCompany Description Founded in 1985, BPM serves more than 2,000 programming centers, original equipment manufacturers, contract manufacturers and semiconductor manufacturers in over 42 countries. BPM programmers feature high-performance device handling, advanced serialization and quality control, meeting the highest programming and cyber security standards for automotive, aerospace, medical, industrial and mobile device industries. With BPM, you get intelligently designed systems that deliver the lowest programming cost per device. From low volume first articles to high volume production, BPM Microsystems has a solution to meet your needs today and into the future. Please Apply at https://bpmmicro.com/company/careers/ Founded in 1985, BPM serves more than 2,000 programming centers, original equipment manufacturers, contract manufacturers and semiconductor manufacturers in over 42 countries. BPM programmers feature high-performance device handling, advanced serialization and quality control, meeting the highest programming and cyber security standards for automotive, aerospace, medical, industrial and mobile device industries. With BPM, you get intelligently designed systems that deliver the lowest programming cost per device. From low volume first articles to high volume production, BPM Microsystems has a solution to meet your needs today and into the future.\r\n\r\nPlease Apply at https://bpmmicro.com/company/careers/

Job Description Luxor Staffing is hiring Food Line Workers in Deer Park, TX! Weekly pay, possible overtime, incentive and bonus programs, optional direct deposit, benefits from day 1 on the job and much more! Responsibilities • Perform different assembly and packaging jobs in the processing of foods., • Unpack raw materials, mix ingredients, assemble product, and package finished goods., • Count, pack, and inspect finished product for correct label, cleanliness, and quality., • Ensure that all products (from raw materials to finished product) meet company and government quality standards., • Inspect products; throw out or fix products as necessary; write down the amount of waste as directed., • Notify supervisor of quality issues, ingredient/material problems and/or equipment breakdowns., • Perform all duties in compliance with existing USDA, OSHA, State, Federal, and company regulations, policies and procedures (including Good Manufacturing Practices (GMP's) and safety regulations). Requirements • High school diploma or equivalent preferred., • Experience in a manufacturing or food processing environment., • Commitment to maintaining a safe, clean, and healthy workspace., • Flexibility to accommodate variable schedules, including weekends and overtime.\nCompany Description Luxor Staffing offers a corporate staffing experience, yet we provide the hands-on service normally expected only from a small, locally-owned firm. Established in 1999, Luxor now has 25 offices in Texas, Ohio, Pennsylvania, Florida, Georgia, North Carolina and Tennessee. We are high-volume experts, specializing in staffing shifts of 300 or more employees, 24 hours a day, 7 days a week. Our management team brings well over a century of combined staffing industry expertise to the table—you can be assured that whatever your needs, we have done it before and we do it the best. Luxor's leadership team stands on a legacy of delivering effective solutions. No matter what staffing obstacles you face, we offer the leverage you need to run and grow your business. Luxor Staffing offers a corporate staffing experience, yet we provide the hands-on service normally expected only from a small, locally-owned firm. Established in 1999, Luxor now has 25 offices in Texas, Ohio, Pennsylvania, Florida, Georgia, North Carolina and Tennessee. We are high-volume experts, specializing in staffing shifts of 300 or more employees, 24 hours a day, 7 days a week.\r\n\r\nOur management team brings well over a century of combined staffing industry expertise to the table—you can be assured that whatever your needs, we have done it before and we do it the best. Luxor's leadership team stands on a legacy of delivering effective solutions. No matter what staffing obstacles you face, we offer the leverage you need to run and grow your business.

Job Description Manufacturing Assembler **Job Description Title Manufacturing Assembler Position Information Division Service Reports to (Position) Manufacturing Supervisor FLSA Status Non-Exempt Overtime Eligibility Eligible Position Summary A Manufacturing Assembler is responsible for putting together components or parts to create finished products. They follow blueprints, work instructions, or diagrams to assemble products using various tools and equipment. Assemblers may work in manufacturing or production environments and may be required to perform quality checks and ensure that products meet specifications. They may also be responsible for maintaining a clean and organized work area and reporting any issues or defects to supervisors. Attention to detail, manual dexterity, and the ability to work as part of a team are important skills for an Assembler. Supervision None Essential Responsibilities Build and assemble mechanical components for Switchgear and/or Breaker units according to engineering drawings and customer specifications using master copy, spec sheet, front elevation and WO files Perform maintenance and proper use of tools. Perform in process inspections; ensure quality by following standard work instructions and identifying any potential risks to product quality. Identify and track shortages Perform all ship prep functions including splitting gear. Assist in Root Cause Analysis on engineering changes and correct discrepancies Assist a small team of employees to complete a specific task assigned by lead assembler and/or supervisor Perform final "in process inspections" Perform mechanical adjustments for switchgear Promote a safety culture as well as attend all safety meetings. Ensure that work areas remain clean and well organized. Minimum Qualifications Minimum education level of a High School Diploma or General Education Equivalent Diploma is preferred. 2-4 years of experience in a manufacturing environment preferably assembling medium to large sized metal boxes/enclosures or electrical switchgear Ability to read a tape measure (including conversions from fraction to decimal and conversely from decimal to fraction and metric to imperial). Must have a basic command of the English language, both written and verbal. Basic knowledge of operating desktop computer. Safely use variety of hand/power tools. Lift up to 50lbs using proper lifting techniques. Preferred Qualifications • Basic MES system knowledge, Oracle preferred. Skills, Abilities & Other Requirements Read and understand spec sheets and follow proper use of hardware by spec requirements. Able to read and understand single and three-line drawings, including symbols Able to interpret and execute change orders Able to identify part discrepancies and properly write HFDs for corrections Knowledge of mechanical drawings and designs Ability to follow direction from Lead Assemblers. Effectively demonstrates on-time delivery and the ability to stay focused on goals and responsibilities. Self-starter with ability to take on multiple tasks with a drive to succeed. Challenges the status quo; looks for better or more efficient ways to get results. Ability to adapt to new ideas, technology, processes or product changes. Believes and displays through actions that our customers represent our current success and remain vital to our future growth. Demonstrates integrity and ethical decision making. Conscientious, thorough, accurate, and reliable when performing and completing job tasks. Able to work effectively within your team and around other departments and their activities. Ability to learn and adhere to all manufacturing policies and practices to ensure adherence to ISO requirements. Working & Environmental Conditions Working Conditions · Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities. · Required to wear personal protective equipment (PPE) (i.e., safety shoes, hard hats, bump caps, safety glasses, hearing protection, safety harnesses as required) and respirators when required. · Must be able to work from all type of ladders (step ladders, "A" frame ladders, etc.) · Working at heights usually no higher than 20 feet in the air on an elevated structure using proper lift equipment and Fall Protection Equipment. Physical Requirements · Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs or step ladders · Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction · Continuous standing and walking · Able to use upper extremities frequently, work with both arms above shoulders and use both arms at full length frequently. · Must be able to meet physical lifting demand up to 50lbs. · Frequent use of hand tools and power tools More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. You should be proficient in: • Electrical Schematics, • Machine Building/Assembling, • Tape Measure Reading, • Maintenance and Repair Skills, • Mechanical Assembly Skills, • Equipment Installation, • High School / GED, • Blueprint Reading

Job DescriptionDescription: Overview: IKG is the leading manufacturer of bar grating for a variety of industries: including industrial, architectural, government, safety and more. Since 1902, IKG has maintained its’ position by having a dedication towards quality materials, improving technologies, and providing exceptional customer service. You will part of an experienced team working closely with the customer, helping ensure all projects are a success. From inquiry to installation, IKG prides itself in Forging Partnerships and creating products that with stand the test of time. Summary: We are seeking a reliable Laser Operator to operate CNC laser cutting equipment in a manufacturing environment. This role involves loading materials, running production, inspecting parts, performing basic machine maintenance, and maintaining a safe, efficient workspace. The ideal candidate has strong mechanical aptitude, attention to detail, and a commitment to quality. Responsibilities: • Operate the Bystronic BySmart Fiber 4020 laser cutting machine., • Upload and verify programs for production runs., • Coordinate with the Production Supervisor to prioritize and schedule work., • Load raw material and unload finished parts using a forklift., • Inspect parts for quality and ensure they meet production requirements., • Perform routine preventive maintenance, including cleaning the machine, shuttle tables, and slats., • Replace worn slats and assist with other routine equipment upkeep., • Monitor machine performance and work with the Maintenance department to troubleshoot and resolve equipment issues., • Maintain a clean, organized, and safe work area., • Follow all company safety policies and standard operating procedures., • Assist with other production duties as assigned.Requirements: Qualifications: • Previous experience operating CNC laser cutting equipment preferred., • Forklift experience or the ability to become forklift certified., • Ability to read work orders, drawings, and production documentation., • Strong mechanical aptitude and problem-solving skills., • Ability to work independently while communicating effectively with supervisors and maintenance personnel., • Ability to safely lift materials and work in a manufacturing environment. The above job description is a general overview of typical responsibilities and qualifications for the position of Fabrication Foreman. The specific duties and requirements may vary depending on the organization’s needs. IKG is committed to equal employment opportunities. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, sex, disability, protected veteran status, or any other basis protected by applicable federal, state, or local law.

Job Description Job Purpose The UT Operator shall operate and assist in the functions UT testing of pipe material in accordance with plant policies and procedures. He/she will ensure a safe and compliant operation during his/her shift. Duties & Responsibilities • Daily operation of in-line UT inspection equipment. • Reporting of all Non-conformances and any potential quality issues. • Helping problem solve any quality issues on line. • The secondary function is to perform all daily prove-up on rejected material. • Current knowledge and understanding of all relevant SeAH SOP’s, • Perform all applicable inspection functions to the requirements of ASNT SNT-TC-1A and API., • Separate pipe that needs further evaluation (prove-up) ensuring material is properly segregated. • Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly. • Review work orders and specifications to determine materials needed to be processed., • Other duties as assigned., • Detection of defects which are inherent to various steel making and pipe manufacturing processes., • Conduct inspection to ensure quality, detect discontinuities using ultrasonic equipment., • Accurate process of paperwork and test results., • Determine if pipe does/does not meet SeAH specifications., • Report any discrepancies in reports to QC Auditor / Mill Supervisor., • Ensure proper procedures and paperwork is being used and utilized., • Other duties as assigned. Qualifications / Competencies • High School Diploma or equivalent preferred but not required., • Training in Ultra Sonics and Quality. Must have a Level 1 or Level 2 UT certification. • Ability to multi-task, • Good arithmetic skills are required., • Mechanical aptitude desired, • 2 years’ Quality Control experience is preferred., • Manual dexterity required for operating machinery, hand tools and handheld technical devices., • Knowledge of the manufacturing processes, procedures, and welding operation. • General proficiency of Microsoft Excel, Word and Databases, Track-Pro System (is preferred) Physical Requirements & Working Conditions • Working conditions are normal for a manufacturing environment., • Loose-fitting clothes and jewelry are not permitted on site., • Must be able to stand on feet for a minimum of 8 hours and lift 50lbs., • The ability to lift 25/50 pounds regularly., • The ability to respond quickly to sounds., • The ability to move safely over uneven terrain or in confined spaces., • The ability to see and respond to dangerous situations., • The ability to safely climb ladders while carrying 40 pounds., • The ability to work in loud, hot environments/extreme weather while wearing required PPE., • Ability to see 20-20 when corrected., • Ability to identify and distinguish colors.

Job DescriptionDescription: Overview: IKG is the leading manufacturer of bar grating for a variety of industries: including industrial, architectural, government, safety and more. Since 1902, IKG has maintained its’ position by having a dedication towards quality materials, improving technologies, and providing exceptional customer service. You will part of an experienced team working closely with the customer, helping ensure all projects are a success. From inquiry to installation, IKG prides itself in Forging Partnerships and creating products that with stand the test of time. Summary: Load slit coil onto payoff racks and monitor coil payoff while running, insuring smooth and steady operation. Unloads finished product and moves to designated staging areas. Threads, cuts, matches ends and welds coil ends. Primary Responsibilities: • Assists operator in making set-ups as required., • Observes incoming material, monitors coil feed process, manipulates controls as required and advises Operator in event of malfunction or material problems., • Loads welder with slit coil using fork trucks, coil grippers and other appropriate material handling equipment., • Monitors run out equipment, shear and off-load equipment. Checks material coming off welder and identifies finished grating pieces, and writes up jobs. Reports apparent defects or equipment malfunction to Operator and/or Supervisor. Unload material into designated areas., • Performs minor maintenance reports any malfunction of equipment to supervisor., • Performs other miscellaneous duties as assigned by Supervisor such as, but not limited to inventory counts, unloading incoming materials, loading raw material, etc., • Maintains neat and orderly work area., • Restocks coils of flat bar, loads, threads, cuts, matches end and welds ends together, as required., • Performs job functions using safe work practices., • Required to adhere to all safety rules and regulations and participate in safety efforts., • The above statement reflects the general details considered necessary to describe the principal functions of the job identified and shall not be construed as a detailed description of all the work requirements that may be inherent in the job.Requirements: Education and/or Experience: • High School diploma and some manufacturing or related experience., • Trade school preferred: Welding; manufacturing or related., • Ability to read and interpret documents as well as technical manuals and materials. Ability to write clear instructions and fill out required paperwork., • Ability to perform basic math as it relates to production items. Physical Activity of the Position: • Kneeling: Bending legs at knee to come to a rest on knee or knees., • Crouching: Bending the body downward and forward by bending leg and spine., • Reaching: Extending hand(s) and arms(s) in any direction., • Standing: Particularly for sustained periods of time., • Walking: Moving about on foot to accomplish tasks or moving from work side to another. This job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not intended to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this position. “IKG is an EEO/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender orientation; genetic traits, national origin, disability or protected Veterans.

Job Description Reports to: Painting Supervisor Primary Responsibility: Support MIRATECH customers with work in our service center and warehouse. Operating equipment and support product creation and order fulfillment. Schedule: Monday - Friday 6am to 3pm Specific Duties and Responsibilities: • General Labor, • Setting up painting equipment, • Overseeing training of new or Junior Machine Operators, • Using machine equipment to complete tasks, • Evaluating the efficiency of each unit regularly, identifying improvements as needed, • Other duties as assigned. Qualifications: • Preferably 2 + years of general warehouse experience and operating manufacturing equipment, • Must be able to lift up to 75 lbs. individually and heavier items with team lift., • Forklift, crane, shear, and/or roller operation experience., • Knowledge of safe workplace practices., • Ability to make independent decisions., • Attention to detail., • Organizational and time management skills. Physical Requirements: • Ability to lift up to 50 pounds., • Standing, bending, and walking for extended periods of time Benefits and Perks: • Health, Dental & Vision Insurance, • Annual Bonus Program, • $350 Annual Wellness Credit, • Flexible Spending Account (FSA), • 401k with match up to 5%, • Life insurance, • Disability insurance, • 5 days of paid sick leave annually (prorated based on start date), • 15 days PTO annually (prorated based on start date) Equal Opportunity: MIRATECH is an equal opportunity employer and supports a diverse and inclusive workforce. All employment practices are based on qualification and merit, without regards to race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation or preference, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal laws and regulations Job Posted by ApplicantPro

Job Description Job Type: Full-Time Department: Manufacturing / Production Location: North Houston, TX About the Position We are seeking a dependable and Assembler to join our manufacturing team in North Houston. The Assembler will be responsible for building and assembling hydraulic and industrial hose products according to customer specifications, production requirements, and established quality standards. This is a hands-on manufacturing position that is ideal for someone who enjoys working with tools, equipment, and mechanical components and takes pride in producing quality products. Key Responsibilities • Assemble hydraulic and industrial hose products according to work orders, drawings, and specifications., • Use hand tools, power tools, measuring equipment, and manufacturing equipment., • Cut, assemble, crimp, and prepare hose assemblies as required., • Read and follow work instructions, diagrams, and assembly specifications., • Measure components and verify dimensions to ensure products meet specifications., • Inspect completed assemblies for quality, accuracy, and proper fit., • Identify defective materials or assembly issues and communicate them to the appropriate supervisor., • Operate production equipment safely and efficiently., • Maintain a clean, organized, and safe work area., • Follow company safety procedures and quality standards., • Meet daily production goals while maintaining attention to detail., • Work effectively with other members of the production team., • Machine Operation What We're Looking For Preferred Experience Experience in any of the following is a plus: • Hydraulic hose assembly, • Industrial hose assembly, • Hose crimping, • Mechanical assembly, • Automotive repair, • Machine operation, • Welding or fabrication, • Industrial manufacturing, • Maintenance, • Construction, • Pneumatic or hydraulic systems

Job Description To be immediately considered, send your resume to interviews@lpcpersonnel.com and call us! 713-680-9898 Position Summary We are seeking a dependable and detail-oriented Thread Machine Operator to join our manufacturing team. The Thread Machine Operator will be responsible for operating and monitoring thread-cutting, threading, and related production equipment to manufacture quality parts according to company specifications. Key Responsibilities • Operate thread machines and related manufacturing equipment safely and efficiently, • Set up machines according to work orders, specifications, and production requirements, • Load and unload materials and parts, • Monitor machine operation and make basic adjustments as needed, • Inspect finished parts using measuring tools such as calipers, micrometers, and thread gauges, • Identify defects, machine issues, and quality concerns and report them to the appropriate supervisor, • Maintain accurate production and inspection records, • Keep the work area clean, organized, and compliant with safety standards, • Perform routine machine maintenance and assist with troubleshooting when necessary, • Follow all company safety policies, procedures, and quality standards, • Meet established production goals while maintaining product quality Qualifications • Previous experience operating thread machines, CNC equipment, lathes, or similar manufacturing machinery preferred, • Mechanical or manufacturing experience is a plus, • Experience with threading, tapping, machining, or metalworking equipment preferred, • Ability to read and understand basic work instructions, blueprints, or production drawings, • Ability to use precision measuring tools such as calipers, micrometers, and thread gauges, • Familiarity with quality-control procedures, • Good attendance and reliability, • Ability to work independently and as part of a team, • Ability to stand for extended periods and safely lift and move materials as required If you are already registered with us, please send your updated resume to interviews@lpcpersonnel.com and reference this job title as the subject

Job DescriptionJob Description: Trystar is at the forefront of advancing power solutions, charged and driven by a committed, dynamic team, tackling complex challenges, and creating innovative solutions. We’re looking for motivated, driven, and talented individuals eager to be part of the future of power. Safety and integrity aren’t just buzzwords, they are the north star guiding us as we aspire to wow our customers every day. We’ve created power solutions that are not only durable and unique but are also the result of exciting teamwork from every corner of our organization. Individually and collectively, every team member at Trystar plays for each other and strives to deliver unmatched value and 100% accuracy to our customers every single day. Our cutting-edge headquarters is in Faribault, MN, a facility that is partially solar- and wind-powered by our own microgrid! You’ll find that we’re also pushing boundaries across the country at our additional facilities in Troy, MI; Houston, TX; Merrimack, NH; Burnsville, MN; and Murfreesboro, TN. Trystar’s team members are our most important asset, we are in search of a Brake Press Operator, for our Faribault, MN facility. This position plays a critical role in achieving our strategic objectives. Trystar’s Brake Press Operator position is an important part of Trystar’s plan to become the world’s foremost custom solution provider. Under the direction of the Production Supervisor, the Brake Press Operator will be responsible for operating press brake machines to bend, shape, and form sheet metal or other materials according to engineering drawings and specifications. They play a crucial role in the manufacturing process, ensuring precise and efficient production of components used in various industries. We are looking for people who believe in our guiding principles and values of: • Safety – We believe everyone should leave Trystar facilities in the same or better condition than when they arrived., • Integrity – We’re honest, transparent, and committed to doing what’s right., • Customer focus – We have relentless focus on our customers and their success., • Right with speed – We use good judgement, make thoughtful decisions quickly, and execute them with purpose and intensity., • Play for each other – We’re a team. We show up for each other and we know that through teamwork we achieve greatness., • Champion change – We know adaptation and improvement are requirements to survive and to thrive., • Enjoy the journey – We create an environment where our team feels appreciated and has fun along the way. In this role you will get to: • Machine Setup: Prepare and set up the press brake machine by loading the appropriate tooling, dies, and materials. Ensure the machine is correctly calibrated and aligned for accurate bending operations., • Material Handling: Position and align sheet metal or other materials on the press brake bed, ensuring proper placement for precise bending., • Bending Operations: Operate the press brake machine to bend or form materials as per engineering drawings and specifications. This includes selecting the appropriate tooling, adjusting machine settings, and monitoring the bending process., • Quality Control: Regularly inspect bent components to verify dimensional accuracy and quality, using measuring instruments such as calipers and gauges., • Tool Maintenance: Perform routine maintenance on press brake tooling, ensuring they are in good condition and replacing them when necessary., • Troubleshooting: Identify and resolve minor issues or deviations that may occur during the bending process, such as material inconsistencies or machine malfunctions., • Safety Compliance: Adhere to all safety guidelines and protocols while operating the press brake machine, ensuring compliance with company and industry safety regulations., • Production Monitoring: Monitor the bending process to maintain a steady workflow and promptly address any deviations or inefficiencies., • Documentation: Accurately record production data in Epicor, machine settings, and maintenance activities to maintain production records and assist in process improvement efforts. This also includes daily production reports, tally sheets, scrap reports, etc., • Collaboration: Coordinate with other team members, including supervisors, engineers, and quality control personnel, to ensure smooth production flow and meet production targets., • Read, comprehend, and execute processes and procedures according to the Standard Operating Procedures (SOP’s) which are necessary to properly operate the equipment and manufacture the product., • Read and interpret Solidworks engineering drawings as needed for accurate and safe brake operation., • Maintain and operate hand tools necessary to set-up, take apart and to operate the equipment., • Process Improvement: Continuously seek opportunities to improve bending processes, reduce cycle times, and enhance overall efficiency while maintaining high-quality standards., • Perform other projects and duties as assigned. Job Requirements: BASIC QUALIFICATIONS • 2 years’ experience in machine operation or mechanical ability and aptitude to understand how manufacturing equipment works together in a line to produce high quality products., • 2 years of experience working in a manufacturing environment or have general knowledge of metalworking, bending and tooling., • Ability to lift and carry up to 50 pounds on a regular basis., • Must be able to read, write and comprehend plant directives written in English., • Proficiency in reading and interpreting engineering drawings and specifications. ADDITIONAL QUALIFICATIONS • High school diploma, • Technical secondary education is preferred., • Previous Brake Press Operation is preferred., • Perform simple mathematics to comprehend and interpret process sheets, SOP manuals, tally sheets, etc. and to keep accurate account of materials used during manufacturing process including scrap amounts., • Frequent lifting, standing, bending & reaching required, • Able to pass a pre-employment physical and drug test, • Must adhere to all the PPE requirements to perform the job safely, this includes but is not limited to, Eye, Hand, Feet, and Hearing protection

Job Description Machine Operator - Day Shift - $18.50/hour - 6:00am-2:00pm Monday - Friday Who we are looking for: We are currently looking for a Machine Operator - Day Shift - $18.50/hour - 6:00am-2:00pm Monday thru Friday to be based out of Houston, TX. Reporting to the Supervisor, this person will be responsible for performing various tasks to set up, operate, monitor, and troubleshoot on assigned machines. The Machine Operator will also be responsible for inspecting parts to specifications and making adjustments or tool changes as necessary to maintain quality specifications. The Operator sets up and operates a production machine in accordance with established procedures and guidelines. Experience in lean manufacturing or business system-based company is a plus. What you’ll do: Additional Responsibilities include, but are not limited to: • Ability to work in a fast-paced, high-speed environment, follow standardized work and adhere to safe work practices in a continuous improvement environment, • Sets up and operates a production machine in accordance with established procedures and guidelines., • Reads and interprets blueprints and diagrams to select, position and secure machinery., • Adjusts machine settings to complete tasks accurately, according to specifications and in a timely fashion., • Performs necessary pre-operation activities to ensure proper equipment startup and operation on multiple pieces of equipment, • Operates/monitors multiple pieces of equipment during operation to ensure quality production and minimal unplanned stops, • Communicates with team members and support teams to ensure continuous production of the correct product at high quality levels with minimal wasted time and materials, • Completes documentation including daily production reports, regular quality inspections, and safety inspections of equipment, • Actively participate in Atkore’s safety program, • Cross train in different areas of the shop as required, • Ensure all processes are carried out with the required use of safety controls and PPE, • Ability to work in a fast-paced, high-speed environment, follow standardized work and adhere to safe work practices in a continuous improvement environment, • All other duties as assigned Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. What you’ll bring: • High School Diploma or GED equivalent (preferred), • Ability to work scheduled hours Monday-Friday, • Experience as a Machine Operator a plus, • Experience in a manufacturing environment is a plus, • Knowledge of Production Procedures, • Ability to Read Blueprints, Schematics and Manuals, • Attention to Detail, • Teamwork, • Work Independently, • Multitask, • Knowledge of lean production processes preferred., • Ability to stand and work a 10-hour shift in a non-climate-controlled manufacturing environment, • Must be willing to work overtime as needed, • Time Management, • Process Improvement, • Inventory Control, • Data Entry Skills, • Analyze Information, • All associates must embrace and foster an environment that supports our core values of Integrity, Respect, Excellence, Teamwork and Accountability. Within 3 months, you’ll: • Complete any required training, • Have developed relationships with the key stakeholders for this role., • Be well-versed in Atkore’s Business System and the importance of your role to daily operations. Who we are: Atkore is a six-time Great Place to Work© certified company and a four-time Top Workplaces USA award winner! We’re committed to creating an engaged, aligned workforce driven by a collaborative culture. Our team strives for breakthrough results and stays focused on being standout leaders. We consistently live the Atkore mission, strategic priorities, and behaviors consistent with our core values. Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $18.50/hr. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: • Medical, vision, and dental insurance, • Life insurance, • Short-term and long-term disability insurance, • 401k, • Paid Time Off, • Paid holidays, • Any leave required under federal, state, or local law Benefits are subject to vesting and eligibility requirements. Applications are being accepted on an ongoing basis.

Job Description Machine Shop Operator - 2nd Shift Houston, Texas Full-Time Role Summary/Purpose Plan and perform the set up and operation of an assigned CNC numerical controlled lathe to machine component parts in process of ferrous, non-ferrous and alloy metals. Work involves the assignment to either the NC/CNC Lathes, proving out computer programs in collaboration with Programmer, and following prescribed program, tooling, set up and offset specifications. Essential Responsibilities • Must be able to work from detail part drawings, work orders, set ups, tooling, process and operation instruction sheets, and digital program., • Set up and operate 2-axis lathes and operate 4-axis lathes on a wide range of products, receiving assistance from programmer or supervisor if needed., • Review parts program file and select set tools in tool holder, turret, or cross slide location., • Operate control console to enter program data, back off tool offsets, and check out with dry run. Edit the program as required., • Unload bar stock from delivery truck with overhead crane and place in intermediate storage area., • Load part, sequence each tool, enter offset adjustment data, and continue trails (as required) to produce piece meeting drawing specifications., • Inspect parts periodically in accordance with established frequency, for conformance to quality and engineering specifications, making offsets (as required) to compensate for tool wear., • Indicate work to detect and eliminate run out., • Tolerances are very strict and involve a demand for squareness, concentricity, and parallelism., • Detect and report faulty operations, defective material, and equipment, drawing discrepancies, and other unusual conditions to the proper supervisor., • Maintain workplace in neat and orderly condition. Qualifications/Requirements • GED or High School Diploma, • 1 - 2 years Manufacturing Experience Dresser is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills, and experiences within our workforce. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status, or other characteristics protected by law.

Job Description Operates the insulation machine to perform the assembly of the product (Flexible Duct) to specifications. The operator performs changeovers, checks for correct material, labels, fills out the 1st article inspection sheet, scrap reporting, gap analysis sheet and runs efficiently. The operator will also follow the production schedule for their line. Position Responsibilities May Include: • Follow the production schedule given by the crew chief., • Inspect the line to verify the raw materials are the correct ones (insulation, core, jacket, and UL labels) according to the product specification sheets., • Fill out duct line operator first article & safety log and GAP analysis sheets., • Make the necessary changes to Mandrel, glass guide basket, and UL labels for product changes when necessary., • Adjust the label gun to the date code corresponding to the date., • Load the core tray with core, foil (silver) jackets onto machine table or black jacker onto reel holder, and load insulation into the insulation feeder machine., • Put the jackets on the Mandrel and start the jacket winder., • Operate the Duct Machine., • Roll the product to the bagger when complete., • Maintain area and always keep clean., • Perform additional projects/duties to support ongoing business needs. Nature & Scope: • Works within well-defined instructions, • Uses established procedures and works under supervision to perform assigned tasks, • Work is closely supervised Knowledge & Skills: • Ability to read and write English., • Ability to communicate with supervisors and crew chiefs., • Basic math skills to include addition, subtraction, and multiplication., • Ability to work independently., • Detail oriented., • Must have quick hands., • Ability to apply good judgement, strong work ethics and integrity on the job. Competency: Experience: • Prior machine operator experience preferred but not mandatory. Education/Certification: • High School Diploma or GED equivalent People Management: No Physical Requirements / Work Environment: • Must be able to perform essential responsibilities with or without reasonable accommodations., • Manufacturing environment with forklift traffic., • PPE required: steel toed safety shoes, safety glasses with side shields, and gloves., • Job requires standing (up to 90%), walking (up to 10%), stooping or bending, reaching, twisting and turning., • Lifting, carrying, and pushing up to 40 lbs., • Hand Eye Coordination, handling tools and other objects (holding, grasping), repetitive wrist motion (flexion/rotation), and repetitive foot movements (Foot Pedals). Reports To: Manufacturing Manager, Supervisor, or Lead The Company provides equal employment opportunity to all employees and applicants regardless of a person’s race, color, religion (including religious dress or grooming practices), creed, national origin (including language use restrictions), citizenship, uniform service member or veteran status, ancestry, disability, physical or mental disability (including HIV/AIDS), medical condition (including cancer and genetic characteristics), genetic information, request for protected leave, marital status, sex, pregnancy, age (over 40), sexual orientation, gender, gender identity or expression, political affiliation, or any other characteristic protected by law. The Company will comply with all federal and state regulations and statutes pertaining to individuals with disabilities.

Job DescriptionDescription: About Piping Technology & Products (PT&P) PT&P is a trusted leader in the design and manufacturing of engineered products for piping systems, proudly serving industries like oil & gas, power, and chemicals since 1978. Headquartered in Houston, we’re known for innovation, quality, and customer commitment. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently. Position Summary The Saw Operator is responsible for operating industrial saws (band saw, cold saw, chop saw, or similar equipment) to cut metal materials to required lengths and specifications. This role ensures accurate measurements, safe machine operation, and proper material handling to support production and fabrication schedules. Responsibilities • Set up and operate saws to cut metal bars, pipes, tubes, structural steel, and other materials., • Read and interpret work orders, cut lists, blueprints, and job travelers., • Select proper blades based on material type and thickness., • Adjust saw speed, feed rates, and guides for optimal cutting performance., • Monitor cutting operations to ensure accuracy, consistency, and quality., • Measure materials before and after cutting using tape measures and other tools., • Verify dimensions and tolerances match customer or production requirements., • Inspect materials for defects or incorrect specifications., • Ensure clean, straight, and burr-free cuts., • Load and unload materials using forklifts, overhead cranes, pallet jacks, or other equipment, • Properly stage, tag, and label cut materials for the next production step., • Maintain accurate documentation of cut quantities and material usage., • Perform routine saw maintenance, including cleaning, blade changes, lubrication, and safety checks., • Ensure work area is clean, organized, and free of hazards., • Follow all safety procedures, including machine-guarding, PPE requirements, and safe lifting practices., • Immediately report equipment issues, blade damage, or unsafe conditions to the Supervisor., • Meet production deadlines by organizing work efficiently and maintaining consistent output., • Coordinate with Fabrication, Machine Shop, or Warehouse teams regarding material needs., • Assist with general shop tasks when needed. Requirements: Qualifications • High school diploma or GED required, • 1+ year of experience operating industrial saws or working in a fabrication environment preferred, • Basic mechanical aptitude and troubleshooting skills., • Ability to read and understand blueprints, cut lists, and work instructions., • Good communication skills and ability to work with cross-functional teams, • Ability to follow instructions and work in a team environment., • Ability to multitask and prioritize in a fast-paced environment., • Must be able to pass pre-employment screenings and background checks, • Strong attention to detail, safety awareness, and teamwork. Physical Requirements • Must be able to stand for prolonged periods (8+ hours), • Must be able to lift, push, pull, or carry up to 50 lbs. independently, • Frequent bending, stooping, reaching, and manual handling of materials required, • Good hand-eye coordination and manual dexterity, • Ability to tolerate noise, heat, and dust in a manufacturing environment, • Visual acuity to read measuring tools, drawings, and detect quality defects, • Must pass initial and ongoing physical or occupational health screenings (e.g., lifting assessment, vision test, hearing test, etc.), • Must be able to wear required PPE, including steel-toe boots, gloves, safety glasses, and hearing protection Work Environment Manufacturing floor with exposure to moving mechanical parts, sharp materials, and moderate to loud noise. May be exposed to hot or cold environments depending on season. Work schedule may include overtime, weekend shifts, or on-call schedules as needed

Job Description Machine Operator - Night Shift - $18.50/hour plus $1.00/hr shift differential - 6:00pm-2:00am Monday thru Friday Who we are looking for: We are currently looking for a Machine Operator - Night Shift - $18.50/hour plus $1.00/hr shift differential - 6:00pm-2:00am Monday thru Friday to be based out of Houston, TX. Reporting to the night shift Supervisor, the Machine Operator will be responsible for performing various tasks to set up, operate, monitor, and troubleshoot on assigned machines. The Machine Operator will also be responsible for inspecting parts to specifications and making adjustments, or tool changes as necessary to maintain quality specifications. The Operator sets up and operates a production machine in accordance with established procedures and guidelines. What you’ll do: Additional Responsibilities include, but are not limited to: • Ability to work in a fast-paced, high-speed environment, follow standardized work and adhere to safe work practices in a continuous improvement environment, • Sets up and operates a production machine in accordance with established procedures and guidelines., • Reads and interprets blueprints and diagrams to select, position and secure machinery., • Adjusts machine settings to complete tasks accurately, according to specifications and in a timely fashion., • Performs necessary pre-operation activities to ensure proper equipment startup and operation on multiple pieces of equipment, • Operates/monitors multiple pieces of equipment during operation to ensure quality production and minimal unplanned stops, • Communicates with team members and support teams to ensure continuous production of the correct product at high quality levels with minimal wasted time and materials, • Completes documentation including daily production reports, regular quality inspections, and safety inspections of equipment What you’ll bring: • Experience as a Machine Operator a plus, • Experience in a manufacturing environment is a plus, • Knowledge of Production Procedures, • High school diploma or equivalent preferred, • Ability to Read Blueprints, Schematics and Manuals, • Attention to Detail, • Teamwork, • Work Independently, • Multitask Within 3 months, you’ll: • Complete any required training, • Have developed relationships with the key stakeholders for this role., • Be well-versed in Atkore’s Business System and the importance of your role to daily operations. Who we are: Atkore is a five-time Great Place to Work© certified company and a three-time Top Workplaces USA award winner! We’re committed to creating an engaged, aligned workforce driven by a collaborative culture. Our team strives for breakthrough results and stays focused on being standout leaders. We consistently live the Atkore mission, strategic priorities, and behaviors consistent with our core values. Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $18.50/hour. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: • Medical, vision, and dental insurance, • Life insurance, • Short-term and long-term disability insurance, • 401k, • Paid Time Off, • Paid holidays, • Any leave required under federal, state, or local law Benefits are subject to vesting and eligibility requirements. Applications are being accepted on an ongoing basis.

Job DescriptionPosition Summary The Burner Helper supports the Burner Operator in the safe and efficient operation of CNC and manual burning equipment used to cut steel plate to customer specifications. This position is responsible for preparing materials, assisting with equipment setup, handling finished parts, maintaining housekeeping, and ensuring production requirements are met while following all safety and quality standards. This position serves as a developmental role with opportunities to learn burner operations and advance within the Plate Burn Department. Essential Job Duties • Assist the Burner Operator with daily production activities., • Load, unload, and position steel plates using overhead cranes or other material handling equipment (training provided if needed)., • Prepare materials for burning operations., • Remove cut parts from tables and organize completed material., • Grind, clean, and prepare finished parts as required., • Identify, mark, and stage material for the next operation., • Verify work orders and assist in ensuring material matches production requirements., • Maintain a clean and organized work area., • Perform routine housekeeping throughout the shift., • Assist with changing consumables and performing basic equipment maintenance., • Follow all safety procedures and wear required PPE., • Communicate production issues or equipment concerns to the supervisor., • Support other departments as needed., • Perform other duties as assigned.Qualifications, • High school diploma or GED preferred., • Manufacturing or industrial experience preferred but not required., • Ability to learn CNC burning operations., • Basic measuring skills preferred., • Ability to read work instructions and production paperwork., • Strong attendance and reliability., • Ability to work independently and as part of a team.Physical Requirements, • Frequently stand and walk for extended periods., • Frequently bend, stoop, kneel, and climb., • Lift and carry up to 50 pounds., • Work in a non-climate-controlled manufacturing environment., • Ability to safely work around moving equipment, cranes, forklifts, and steel materials.Knowledge, Skills & Abilities, • Commitment to workplace safety., • Willingness to learn new equipment and processes., • Strong attention to detail., • Ability to follow written and verbal instructions., • Good communication skills., • Positive attitude and strong work ethic., • Ability to work in a fast-paced manufacturing environment.Performance Expectations Employees in this position are expected to consistently demonstrate: • Safety – Works safely and follows all Company safety policies and procedures., • Quality – Produces quality work while meeting customer specifications., • Attendance – Maintains dependable attendance and punctuality., • Job Knowledge – Learns equipment, processes, and production requirements., • Teamwork – Works collaboratively with coworkers and supervisors., • Housekeeping – Maintains a clean, organized, and safe work environment. Powered by JazzHR 27OoTDd2b4

Job Description Dematic is seeking a talented Electrical Supervisor. Be a part of a growing team at Dematic! In this position you will have the opportunity to work on different customer projects and locations. The employee may be based anywhere in the continental USA, however, must be willing to travel 100% to customer locations. Don't worry, we have your travel expenses covered and you can earn overtime in this role. We offer: What we offer: • Career Development, • Competitive Compensation and Benefits, • Pay Transparency, • Global Opportunities Learn More Here: https://www.dematic.com/en-us/about/careers/what-we-offer/ Dematic provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. The base pay range for this role is estimated to be $ 73,525.00 - 99,475.00 USD Annual at the time of posting. Final compensation will be determined by various factors such as work location, education, experience, knowledge, and skills. Logistics and Supply Chain Careers at Dematic. Chart your path! Whether you are an engineer, customer service agent, supply chain expert, or salesperson, Dematic has a role for you. Tasks and Qualifications: What You Will Do In This Role: • Ensure outstanding installation quality on project sites, adhering strictly to manufacturing and subcontractor quality checklists. Implement Corrective Actions when discrepancies are identified to maintain our high standards., • Coordinate on-site safety, conducting regular safety audits to ensure compliance with all safety regulations., • Assist with routine equipment trial runs, ensuring all installations meet Dematic's outstanding standards., • Provide detailed on-site reporting on schedules and resources to project managers and customers, keeping them informed and engaged., • Train subcontractors in the installation of Dematic and other material handling equipment, sharing your proven expertise., • Write concise and clear trip reports promptly, adhering to Dematic’s procedures., • Identify and troubleshoot problems as they arise, suggesting appropriate steps for resolution in straightforward scenarios., • Be prepared to travel on short notice, spending up to 100% of your time at various customer locations, with all travel expenses covered., • Navigate large construction sites, performing tasks that require physical endurance including pushing, pulling, crawling, squatting, and walking in various climates and conditions. What We Are Looking For: • A minimum of ten years of experience in troubleshooting electromechanical equipment, with service experience in AGVS, AS/RS, or conveyors being helpful., • A high school diploma or equivalent work experience is required, with an Associate’s Degree or equivalent experience preferred., • Proficiency in quality assurance practices and a detailed understanding of OSHA regulations, with OSHA 10 certification required and OSHA 30 preferred., • Physical ability to lift at least 50 lbs and a willingness to work weekends, holidays, and off shifts, with the possibility of earning overtime compensation., • Competence in using personal computers, database functions, and communication tools, with a solid understanding of hardware setup and software configuration.

Job Description Primary Responsibility: The Industrial Plant Janitor is responsible for maintaining a clean, safe, and sanitary environment in all areas of the industrial facility, including production floors, restrooms, break rooms, offices, and exterior grounds. This role ensures that cleaning standards comply with safety, environmental, and regulatory requirements, helping to support overall plant operations and employee well-being. Job Duties and Responsibilities: • Perform routine cleaning and sanitizing of production/facility areas and common areas., • Sweep, mop, scrub, and vacuum floors; clean and disinfect surfaces., • Empty trash and recycling bins regularly and ensure proper disposal procedures are followed., • Operate industrial cleaning equipment such as floor scrubbers and pressure washers, carpet cleaners., • Monitor cleaning supply inventory and report needs to supervisor., • Follow proper procedures for handling and disposing of hazardous materials., • Respond to cleaning and maintenance requests promptly and professionally., • Adhere to all safety policies and procedures, including the use of personal protective equipment (PPE)., • Support plant operations by maintaining cleanliness in compliance with OSHA and company standards. Qualifications: • High school diploma or GED equivalent., • Prior janitorial, housekeeping, or custodial experience in an industrial or commercial setting., • Ability to work independently and follow verbal or written instructions., • Familiarity with basic cleaning equipment and chemical handling procedures., • Experience in manufacturing, warehouse, or industrial plant environments., • Knowledge of safety regulations, including OSHA standards., • Ability to operate forklifts Required • Must have a minimum one (6) months of experience in cleaning/janitorial in general, • Must have the ability to read, write, and speak Basic English, • Must have the ability to work independently with limited supervision and strong initiative, • Must have the ability to think logically, follow procedures, instructions and make sound decisions Physical Demands/Abilities: • Ability to lift 60 pounds., • Ability to stand for long periods of time., • Regularly required to stand, walk, climb ladders, and work at heights., • Comfortable working in manufacturing environments with varying temperatures, noise, and exposure to industrial equipment., • Ability perform repetitive tasks. Working Conditions: • Manufacturing production environment., • Automated/manual production machinery., • Periods of high ambient temperatures and excessive noise. #NWRIndeed

Job Description Lead Housekeeper Piping Technology & Products Inc. Description About Piping Technology & Products (PT&P) Founded in 1978 and based in Houston, TX, PT&P is a leading manufacturer of engineered pipe supports and other piping system products used in power, refining, chemical, and related industries. We're known for fast turnaround, reliable quality, and a strong commitment to helping our customers keep critical infrastructure running. With a wide range of in-house capabilities, PT&P continues to grow while staying focused on innovation, service, and long-term partnerships. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently. Position Summary The Lead Housekeeper is a working lead responsible for guiding and supporting the housekeeping team while performing hands-on cleaning and facility upkeep duties. This role sets the pace on the floor, ensures daily cleaning tasks are completed to standard, and serves as the first point of contact for the team when the Housekeeping Supervisor is unavailable. The Lead Housekeeper helps maintain a clean, safe, and organized manufacturing facility across the shop floor, offices, breakrooms, restrooms, shipping areas, and common areas. Key Responsibilities Daily Operations and Hands-On Cleaning • Perform cleaning, sanitation, and housekeeping duties alongside the team, including floor care, waste removal, restroom cleaning, breakroom upkeep, and supply replenishment., • Set the standard for quality and pace of work through consistent personal performance., • Complete assigned cleaning routes and ensure all areas meet company cleanliness standards before the end of each shift., • Respond promptly to spills, hazards, or urgent cleaning needs on the shop floor or in common areas. Team Guidance and Coordination • Serve as the on-the-floor lead, directing daily task assignments and helping team members stay on track., • Step in as the primary point of contact for the housekeeping team when the Housekeeping Supervisor is unavailable., • Help train new team members on cleaning procedures, chemical handling, equipment use, and safety practices., • Communicate team progress, issues, and supply needs to the Housekeeping Supervisor. Facility Standards and Inspections • Conduct walkthroughs during and after shifts to verify cleaning quality and identify areas that need attention., • Report facility maintenance concerns, including lighting, plumbing, flooring, and fixture issues, to the Housekeeping Supervisor or Maintenance., • Help maintain accurate logs of completed tasks, inspections, and supply usage., • Identify opportunities to improve cleaning efficiency, consistency, and workflow. Safety and Compliance • Follow all OSHA requirements, company safety policies, hazard communication procedures, and chemical-handling practices., • Wear required PPE at all times and ensure team members do the same., • Coordinate with Safety and Maintenance on spills, hazards, and facility conditions as needed., • Handle cleaning chemicals and equipment according to product labels and Safety Data Sheets (SDS)., • Perform other related duties as assigned. Requirements • High school diploma or GED required., • At least 2 years of housekeeping or janitorial experience; experience in a manufacturing or industrial environment preferred., • Prior lead or senior-level experience preferred., • Knowledge of cleaning chemicals, equipment, sanitation practices, and workplace safety procedures., • Ability to read and follow product labels, Safety Data Sheets (SDS), written procedures, and schedules., • Ability to work effectively in a manufacturing environment, including exposure to heat and noise and compliance with required PPE., • Strong organizational, communication, and time-management skills., • Ability to prioritize tasks, maintain accurate records, and coordinate with team members and other departments., • Bilingual English/Spanish skills preferred., • Ability to stand, walk, bend, stoop, reach, and perform physical cleaning duties for extended periods; ability to lift and move housekeeping supplies and equipment as required. Key Competencies • Hands-on leadership and setting the standard, • Reliability and accountability, • Attention to cleanliness, detail, and quality, • Safety and compliance mindset, • Communication and teamwork, • Problem solving and responsiveness, • Organization and time management Why Join Us? We offer a dynamic work environment, competitive compensation, and opportunities for professional growth. As a key part of our team, you will have the chance to shape our processes and contribute directly to the success of our manufacturing operations. Work Location This is a full-time, in-person position located at: 3701 Holmes Rd #1545, Houston, TX 77051 \nCompany Description PT&P is a trusted leader in the design and manufacturing of engineered products for piping systems, proudly serving industries like oil & gas, power, and chemicals since 1978. Headquartered in Houston, we’re known for innovation, quality, and customer commitment. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently PT&P is a trusted leader in the design and manufacturing of engineered products for piping systems, proudly serving industries like oil & gas, power, and chemicals since 1978. Headquartered in Houston, we’re known for innovation, quality, and customer commitment. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently

JOB DESCRIPTION\n \n \nAre you a Quality Control Inspector looking for an opportunity to grow? Emerson has an exciting opportunity for you! Based in Pasadena, TX, you will play a critical role in ensuring that our products meet the highest standards of quality and conform to design specifications, customer requirements, and industry regulations. You will conduct thorough inspections throughout the production process, utilize precision measuring tools and instruments, and perform dimensional and geometric assessments using advanced technologies.\n \n \nThis role is 1st Shift- Monday- Friday 7:30pm - 4:00pm\n \n As a Quality Control Inspector, you will:\n \n \n\n • Conduct inspections at various stages of production to ensure compliance with design, customer specifications, and industry standards.\n, • Utilize precision measuring tools and instruments (micrometers, calipers, gauges) to verify product dimensions and tolerances.\n, • Analyze and interpret engineering drawings, blueprints, and technical documents to ensure product conformity.\n, • Identify and communicate non-conformances, deviations, and quality issues to machine shop supervisor, engineers, and relevant stakeholders.\n, • Document inspection results, maintain accurate quality records, and prepare reports.\n, • Participate in the development and implementation of quality control procedures and processes.\n, • Collaborate with team members to improve product quality and manufacturing efficiency.\n, • Provide guidance and support to machine shop operators on quality-related matters, ensuring adherence to quality standards.\n, • Conduct non-destructive examination (NDE) testing on materials and products using methods such as visual inspection, magnetic particle inspection, ultrasonic testing, radiography, etc.\n, • Interpret and evaluate NDE test results, report any defects or issues to management and production teams.\n\n \n Who you are:\n \n \nYou build and deliver solutions that meet customer expectations, optimally communicate in various settings, and stayed productive and aligned with your goals.\n \n Required education, experience & skills:\n \n \n\n • High School Diploma or equivalency (G.E.D.)\n, • 2+ years of experience in a manufacturing role.\n, • Strong mechanical aptitude is a must.\n, • Ability to perform in a fast-paced environment while maintaining a professional and effective approach in high-stress situations.\n, • Proficiency in reading and interpreting engineering drawings, blueprints, and other technical documents.\n, • Experience with precision measuring tools and instruments such as micrometers, calipers, and gauges.\n, • Basic to intermediate proficiency with ERP systems (Oracle preferred) and Microsoft Excel for data entry, tracking, and reporting.\n\n \n Preferred education, experience & skills:\n \n \n\n • 2 years of quality experience in a manufacturing environment.\n, • Knowledge of and prior experience with Fisher products, manufacturing processes and organization preferred.\n, • Experience with CMM (Coordinate Measuring Machine) is a plus.\n, • Knowledge of analyzing, evaluating, diagnosing, and resolving equipment and process related problems is strongly preferred.\n, • Demonstrated ability to quickly learn proprietary systems.\n\n \n Our Culture & Commitment to You:\n \n \nAt Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results.\n \n \nWe recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave.\n \n ABOUT US\n \n WHY EMERSON\n \n Our Commitment to Our People\n \n \nAt Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration.\n \n \nWe have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor.\n \n \nAt Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together.\n \n Work Authorization\n \n \nEmerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire.\n \n Equal Opportunity Employer\n \n \nEmerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.\n \n Accessibility Assistance or Accommodation\n \n \nIf you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: [email protected].\n \n ABOUT EMERSON\n \n \nEmerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability.\n \n \nWith global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety.\n \n \nWe offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go!\n \n No calls or agencies please.

Job DescriptionDescription: OVERVIEW: The General Laborer is responsible for operating the filament winders, which includes setting up, tearing down, and cleaning the filament winders. JOB FUNCTIONS/RESPONSIBILITIES: The General Laborer is accountable for the following functions and responsibilities: · Set up the winder as instructed by the published procedures. · Operate the winder as instructed by the published procedures. · Complete the Work Orders properly and record the required data accurately. · Always follow the General Safety Rules of the company as well as safety guidelines within published procedures and report any identified safety hazards to a supervisor or manager. · Wear the required Personal Protective Equipment (PPE) at all times. · Maintain required attendance and punctuality as scheduled to meet production goals. · Always maintain a clean work environment. · Perform other functions and responsibilities as assigned. Requirements: QUALIFICATIONS/EXPERIENCE REQUIRED: The General Laborer must at a minimum possess the following: A minimum of a high school diploma or GED. One year of experience in a manufacturing setting is preferred. Ability to safely operate various hand-held tools and power tools. Ability to work in a team-oriented, high-pressure, and fast-paced environment. Ability to comprehend production requirements. PHYSICAL REQUIREMENTS: The General Laborer must be able to: Lift a minimum of 50lbs., repeatedly, without assistance and up to 100lbs with assistance. Push/pull heavy objects with the proper equipment. Cardiorespiratory: Have average to above-average cardiorespiratory fitness* to perform the essential tasks of this job safely. Must be able to safely tolerate significant demands on the cardiorespiratory system related to working in hot and humid environments, climbing stairs, and occasionally lifting heavy items. *Cardiorespiratory demands vary depending on speed/rate of activity, environmental influences (i.e., temperature, humidity, etc.) body weight, external weight/forces, age, and level of fitness of employee. Wear the appropriate PPE when required (i.e., safety glasses or side shields, steel-toe footwear, etc.). Stand for long periods of time; up to 8-12 hours a day.

Job Description The order puller reviews digital or printed pick sheets, navigates warehouse aisles, selects the precise items required, and transports them to a packing or staging station. This role requires high speed, meticulous attention to detail, and substantial physical stamina to meet tight delivery deadlines. Key Responsibilities: • Review and interpret incoming pick lists or RF scanner instructions to locate items., • Safely locate and pull products from warehouse shelves, verifying correct quantities, barcodes, and serial numbers., • Inspect retrieved items for damage or defects before passing them to the shipping department., • Update stock control databases via computer entries or handheld scanning equipment to reflect pulled items., • Safely utilize material handling equipment like electric pallet jacks, cherry pickers, dollies, and forklifts., • Maintain a clean, organized, and hazard-free workstation to uphold standard warehouse safety policies., • Perform other duties as assigned by the supervisor or management. Qualifications: • High school diploma or equivalent; associate degree preferred., • Previous experience in a warehouse, industrial shipping, or manufacturing facility is highly valued., • RF scanning experience (preferred), • Strong attention to detail, • Excellent organizational and problem-solving skills., • Ability to work independently and as part of a team., • Forklift certification, sit down or standup. (preferred), • Work history must be verified prior to employment., • Bilingual preferred – conversational English. Physical Requirements: • Ability to stand, walk, and move throughout the warehouse for extended periods., • Lift and carry materials weighing up to 50 lbs., • Operate warehouse equipment safely as required.

Job Description Mechanical Assembler / Mechanical Technician / Mechanical Fitter required to join a leading manufacturer of custom industrial HVAC and refrigeration systems based in Houston, Texas. The successful Mechanical Assembler / Mechanical Technician / Mechanical Fitter will work within a production environment assembling, modifying and rebuilding complex industrial HVAC equipment, including compressors, refrigeration piping, electrical cabling, motors and skid-mounted HVAC components. This role would suit someone with experience in HVAC, mechanical assembly, custom manufacturing, industrial equipment repair or facilities maintenance who is comfortable working from engineering drawings and carrying out hands-on mechanical, piping and electrical installation work. Package • $18 to $23 per hour, • Temporary contract with the potential to become a permanent direct-hire role., • Training and development alongside experienced Lead Mechanics and Subject Matter Experts, • Opportunity to work on specialist industrial HVAC equipment Mechanical Assembler / Mechanical Technician / Mechanical Fitter Role • Install, move and modify HVAC and mechanical equipment according to job specifications, procedures and engineering standards., • Read and interpret engineering drawings and product schematics., • Complete structured training alongside a Subject Matter Expert, Lead Mechanic or Supervisor., • Route and install electrical cables, conduits and associated circuits., • Route and install refrigerant piping and complete soldering as required., • Route and install instrument-air piping., • Install and modify chilled-water piping where required., • Mount and align electric motors and bearings., • Mount compressors onto HVAC units., • Install labels and electrical grounding wires., • Mount major HVAC components onto equipment skids., • Complete assigned work within required production hours while minimizing rework., • Work effectively with moderate supervision as part of the production team., • Participate actively in company safety procedures and programs., • Maintain a safe, organized and clean working environment., • Operate forklifts to transport equipment and materials., • Perform additional production and assembly duties when required. Mechanical Assembler / Mechanical Technician / Mechanical Fitter Requirements • Minimum 2 years of HVAC experience involving electrical conduit and circuit installation, refrigerant piping and soldering, instrument-air piping or chilled-water piping preferred., • Minimum 2 years of experience within custom manufacturing, industrial equipment repair or facilities maintenance., • Experience working from engineering drawings or mechanical schematics., • Confident using hand and power tools including screwdrivers, wire cutters, crimpers and drills., • Able to operate a forklift., • Must provide a basic mechanic tool set., • Strong mechanical aptitude and practical troubleshooting ability., • Able to communicate effectively in English., • Able to work productively within a team and plan work logically., • Valid driver's licence., • High School Diploma or GED preferred., • Comfortable working in an industrial manufacturing environment., • Able to stand for extended periods and perform physical duties including climbing, bending, kneeling, reaching, pushing and pulling., • Able to lift up to 20 lb routinely and up to 50 lb occasionally.

Job Description Job Description Position Title: Material Handler / Forklift Operator Department: Warehouse / Production Reports To: Warehouse Supervisor / Production Supervisor Hiring on two locations 77064, and 77039 Position Summary The Material Handler / Forklift Operator is responsible for safely transporting, loading, unloading, and organizing materials throughout the warehouse and production areas. This position ensures that materials and products are delivered to the appropriate locations efficiently to support production operations while maintaining safety and inventory accuracy. The Material Handler / Forklift Operator must operate forklifts and other material-handling equipment safely while following company policies, safety standards, and operational procedures. Essential Duties and Responsibilities • Operate forklifts and other material handling equipment to move raw materials, finished goods, and components throughout the warehouse and production areas., • Load and unload trucks, deliveries, and shipments safely and efficiently., • Transport materials to designated workstations to support production operations., • Maintain accurate inventory movement by following established procedures and documentation requirements., • Inspect materials and products for damage and report any discrepancies or issues to supervision., • Assist with organizing and maintaining warehouse storage areas to ensure safe and efficient workflow., • Perform routine inspections of forklifts and report maintenance or safety concerns immediately., • Follow all company safety guidelines when operating equipment and handling materials., • Assist with general warehouse duties such as staging materials, packaging, and preparing shipments as needed., • Maintain a clean and organized work environment in accordance with safety standards. Safety Responsibilities • Operate forklifts and material-handling equipment in a safe and responsible manner., • Wear required personal protective equipment (PPE) including safety shoes, safety glasses, and other required gear., • Follow all OSHA, state, and federal safety regulations., • Report any unsafe conditions, equipment malfunctions, or hazards immediately. Qualifications • Previous forklift operating experience preferred., • Ability to safely operate forklifts, pallet jacks, and other material handling equipment., • Basic understanding of warehouse operations and inventory handling., • Ability to follow written and verbal instructions., • Strong attention to detail and safety awareness., • Forklift certification preferred or willingness to obtain certification. Physical Requirements • Ability to stand, walk, and move throughout the warehouse for extended periods., • Ability to lift up to 50 lbs as required., • Ability to work in a warehouse or manufacturing environment with varying temperatures and noise levels. Key Competencies • Safety Awareness, • Equipment Operation, • Organization and Inventory Control, • Attention to Detail, • Teamwork and Communication, • Time Management\nCompany Description McDaniel Metals, LLC specializes in fabricating aftermarket HVAC components using sheet metal and a variety of equipment such as CNC Lasers, Panel Benders, Automated Coil lines, CNC Press Brakes, Spot Welders, etc. We maintain a combined manufacturing facility of 160,846 sq. ft.; featuring 3 facilities. McDaniel Metals, LLC specializes in fabricating aftermarket HVAC components using sheet metal and a variety of equipment such as CNC Lasers, Panel Benders, Automated Coil lines, CNC Press Brakes, Spot Welders, etc. We maintain a combined manufacturing facility of 160,846 sq. ft.; featuring 3 facilities.

Job Description This role focuses on building, testing, and inspecting mechanical and electrical components for military, law enforcement, and home theater engagement training systems. The position requires using hand tools, reading engineering drawings, and working under the guidance of senior assemblers to meet daily production goals. The duties are: • Assemble subassemblies and system components in accordance with work instructions, engineering drawings, and established quality standards., • Assist with the assembly of military-designated systems, Law Enforcement (LE) systems, and Home Theatre projector systems under the guidance of senior assembly personnel., • Perform basic mechanical and electrical assembly using hand tools and standard production equipment., • Conduct visual inspections and basic functional checks to verify proper assembly and identify obvious defects or discrepancies., • Assist with system testing by following established test procedures and documenting results., • Accurately complete production paperwork, assembly records, and other required documentation., • Notify the Lead Systems Assembler or supervisor of assembly issues, missing components, damaged parts, or test failures., • Perform basic rework or adjustments as directed by work instructions or supervisory personnel., • Maintain a clean, organized, and safe work area in accordance with company policies and quality requirements., • Follow all production procedures, work instructions, and safety guidelines to ensure consistent product quality., • Support inventory accuracy by properly handling parts, materials, and completed assemblies., • Work effectively with team members to meet daily production schedules and department goals., • Perform other duties as assigned to support production operations. \nCompany Description Laser Shot is a fast-growing Stafford based technology and manufacturing company in the shooting simulation industry; specializing in products and services to the U.S. Military, Law Enforcement Agencies, Hunter Education, Arcade and Home Theater Markets. https://lasershot.com/careers Laser Shot is a fast-growing Stafford based technology and manufacturing company in the shooting simulation industry; specializing in products and services to the U.S. Military, Law Enforcement Agencies, Hunter Education, Arcade and Home Theater Markets.\r\n\r\nhttps://lasershot.com/careers

Job DescriptionJob Description: Warehouse Assistant Location: ColdFire Coffee Roaster- 2750 Fort Royal Drive, Suite B, Houston, Texas 77038 Reports To: Warehouse Lead / Warehouse Supervisor Industry: Coffee Roasting + Manufacturing Position Summary We are seeking a dependable and detail-oriented Warehouse Assistant to support daily operations in our coffee factory. This role assists with receiving, storing, moving, and preparing coffee products and materials, helping ensure smooth production and on-time order fulfillment. The ideal candidate is safety-conscious, organized, and able to work effectively in a fast-paced food production environment. Key Responsibilities Assist with receiving shipments of green coffee, roasted coffee, packaging materials, and supplies. Move and stage materials for roasting, grinding, and packaging operations. Pick, pack, and prepare orders for shipment accurately and efficiently. Help maintain proper stock rotation (FIFO/FEFO) and organized storage areas. Perform basic inventory counts and report discrepancies or damages. Keep the warehouse clean, organized, and compliant with food safety standards. Safely operate pallet jacks and other basic warehouse equipment (forklift training provided if needed). Assist with loading and unloading trucks. Follow all safety, quality, and company procedures. Support other production and warehouse tasks as needed. Qualifications Previous warehouse, production, or material-handling experience preferred but not required. Ability to lift up to 50–70 lbs and stand or walk for extended periods. Strong attention to detail and ability to follow instructions. Reliable, punctual, and team-oriented. Basic math and communication skills. Preferred Skills Experience in food, beverage, or coffee production environments. Familiarity with inventory systems or warehouse software. Forklift or pallet jack experience (certification a plus). Bilingual (English/Spanish) is an asset.

Job Description Company Overview: Knight-Swift Supply Chain (KSSC) is a full-service supply chain and logistics provider (3PL) with a national warehouse presence. KSSC specializes in managed warehousing for all types of industries. From Distribution solutions, eCommerce fulfillment, consolidation services, cross-docking/transloading, our proprietary technology allows us to be efficient and agile in all processes. Job Overview: The Utility Associate is responsible for performing a variety of tasks to support warehouse operations, including receiving, storing, and shipping products. This role ensures the efficient handling of materials, maintains inventory accuracy, and upholds safety and quality standards in the warehouse environment. Duties/ Responsibilities: • Loads raw material or finished product on skid or hand truck., • Preserves a safe and clean work environment by keeping shelves, pallet area and workstations neat., • Uses tools such as hammers and crowbars to remove strapping and open crates/boxes., • Assists with product repair., • Reports defective materials or questionable conditions to the work area supervisor., • Maintains the work area and equipment in a clean and orderly condition., • Follows prescribed safety regulations and complies with all Company and OSHA Safety and Health rules., • Proactively works to assist others in achieving the organization’s objectives., • Strap and secure goods to pallet., • Receives, inspects, and sorts new inventory with RF scanner., • Operates, monitors, and troubleshoots a stretch wrap machine. Required Education & Experience: • High school diploma or equivalent, • At least one year of related warehouse experience, • Knowledge of basic manufacturing, warehousing, or shipping operations Preferred Education & Experience: • Ability to be flexible and adapt to change., • Excellent verbal communication skills., • Excellent organizational skills and attention to detail., • Good math and written communication skills., • Efficient time management skills., • Ability to thrive in a team environment., • Scan gun experience a plus., • 1 year of recent stand-up forklift experience Working Conditions / Physical Requirements: • Work is primarily performed in a non-climate-controlled environment with moderate noise levels. Exposure to moving machinery, forklifts, and other material-handling equipment. Use of personal protective equipment (PPE) as required. Will be required to lift up to 50 lbs. throughout the day. Must be able to stand for long periods of time. Must be able to perform repetitive motions. Work is conducted in a fast-paced, rapidly changing environment. Benefits Offered: • Medical/Dental/Vision Insurance- First of the month after 30 days of employment, • 401K with company match, • PTO and Holiday eligibility on the date of hire, • Weekly Pay, • Full Grant Tuition & Tuition Reimbursement Hayes Company/Knight Swift Warehousing and Fulfillment is an equal opportunity employer and considers qualified applicants for employment regardless of race, gender identity, gender expression, age, color, religion, disability, veteran's status, sexual orientation, or any other protected factor.

Job Description Who doesn’t love doughnuts? TDP Bakery exists to bring fresh indulgent bakery products to places where people could normally never enjoy them. Fresh, never frozen, bakery is just better. Through our BakeFace™ brand private-label partnerships, we supply a broad portfolio of Honestly Fresh™ baked goods to retailers nationwide. We are hiring in our packing department and are offering weekly pay! Our packers are responsible for ensuring our products are carefully packaged within the daily specified timeframes and ready for delivery. This role involves inspecting doughnuts for quality, working closely with the production team to meet daily packing goals and maintaining a clean and organized workspace. Attention to detail and a commitment to food safety standards are essential. The following are job roles in this department: Packer 220: • Pack 220 slots on the trays within the daily specified timeframe., • Packing Station Layout: Use the correct packing station layout., • Route Tags: Use route tags and validate invoice numbers (route, rack, slot, page)., • Packing Accuracy: Ensure packing accuracy to eliminate shorts and extras. Work to reduce or eliminate waste., • Assist with packing products into cups and 6 and 4 packs during earlier shifts., • Support condensing and organizing finished products for efficient storage and distribution., • Clean up the packing station and take the dishes to the washroom., • Adhere to Good Manufacturing Practices (GMP) to maintain a clean and safe working environment., • Maintain a clean and organized work area at all times., • Follow cleaning schedules and procedures for equipment and workspaces., • Ensure all tools and equipment are sanitized regularly., • Dispose of waste materials properly and promptly., • Adhere to hygiene standards and wear appropriate protective gear., • Assist with additional tasks and responsibilities as directed by your supervisor. Required Qualifications: • Previous experience in a commercial bakery or similar environment is preferred., • Strong attention to detail and ability to follow procedures accurately., • Ability to work in a fast-paced environment and manage multiple tasks simultaneously., • Excellent communication and teamwork skills., • Ability to work any day of the week, including weekends (schedule is subject to change)., • Must have a reliable form of transportation to get to work on a daily basis., • Ability to learn and comply with Good Manufacturing Practices., • Authorization to work in the US (must provide proper documentation)., • Must be at least 18 years of age. Physical Requirements: • Ability to stand for extended periods., • Ability to periodically lift and move up to 40lbs., • Manual dexterity for handling doughnuts and packaging materials., • Ability to perform repetitive tasks with precision., • Ability to bend, stoop and reach as necessary during the packing process., • Ability to stand for 8-10 hours. Work Environment: • Manufacturing bakery environment with exposure to machinery, temperature variation, noise, and moving equipment., • Regular standing, walking, and presence on the production floor is required., • Reasonable accommodations may be made to enable individuals to perform essential functions. Compensation and Benefits • Multiple medical plan choices, • Dental and vision coverage, • 401(k) with company match, • Health Savings Account (HSA) options, • Company-paid life insurance, • Employee Assistance Program, • Virtual healthcare access, • Disability and supplemental insurance options, • Employee discounts through our national marketplace program TDP Bakery is an Equal Opportunity Employer and encourages applications from qualified individuals regardless of race, religion, national origin, sexual orientation, gender, disability, or any other category protected by law.

Job Description Job Title: Material Coordinator, Materials Management Job Description: Trystar is a leader in power distribution equipment and related services at the heart of supporting our electrical infrastructure. Our team members focus on producing the highest quality products in the industry and providing industry-leading service. Whether based in our state-of-the-art headquarters in Houston, TX, our corporate office in Burnsville, MN, or a member of our team out in the field, safety and integrity are our guiding principles, and we work together to achieve excellence for our customers every day. Trystar’s team members are our most important asset, we are in search of a Material Coordinator for our Materials Department. This position, reporting to our materials supervisor, plays a critical role in achieving our strategic objectives. Trystar’s Material Coordinator position is an important part of Trystar’s plan to become the world’s foremost custom solution provider. Under the direction of the Materials Supervisor, the Material Coordinator will be responsible for helping to execute our Materials team mission of having the right inventory, in the right place, at the right time. We are looking for people who believe in our guiding principles and values of: • Safety – We believe everyone should leave Trystar facilities in the same or better condition than when they arrived., • Integrity – We’re honest, transparent, and committed to doing what’s right., • Customer focus – We have relentless focus on our customers and their success., • Right with speed – We use good judgement, make thoughtful decisions quickly, and execute them with purpose and intensity., • Play for each other – We’re a team. We show up for each other and we know that through teamwork we achieve greatness., • Champion change – We know adaptation and improvement are requirements to survive and to thrive., • Enjoy the journey – We create an environment where our team feels appreciated and has fun along the way. In this role you will get to: • As a self-starter, ensure timely and accurate material handling delivery according to the needs of your production stakeholders., • Help to define, improve, and uphold process standards., • Understand and execute all types of material transactions using Epicor (ERP)., • Read, comprehend, and execute processes and procedures according to the Standard Operating Procedures (SOP’s) which are necessary to properly operate the equipment and manufacture the product., • Ability to comprehend and act on a production schedule in a fast-paced manufacturing environment., • Operate various powered industrial vehicles within the plant., • Ability to read and understand job travelers, pick lists, and system generated workflow assignments., • Clean, restock, and organize the warehouse area., • Perform other projects and duties as assigned.Job Requirements: BASIC QUALIFICATIONS • High school diploma, • Ability to read instructions, safely operate machines and visually inspect raw materials., • 2 years of experience of material handling in a manufacturing environment or proven knowledge and understanding of material handling best practices., • Experience using an ERP system., • Strong communication, interpersonal skills., • Demonstrated ability to work cross-functionally in a team environment., • Ability to multitask and set priorities., • Outstanding attention to detail, organizational and coordination abilities., • Ability to lift and carry up to 50 pounds., • Must be able to read, write and comprehend plant directives written in English. ADDITIONAL QUALIFICATIONS • Perform simple mathematics to comprehend and interpret process sheets, SOP manuals, tally sheets, etc., • Frequent lifting, standing, bending & reaching required., • Able to pass a pre-employment physical and drug test., • Must adhere to all the PPE requirements to perform the job safely, this includes but is not limited to, Eye, Hand, Feet, and Hearing protection. Benefits: • 401 (k) with company match, • Medical Insurance, • Dental Insurance, • Vision Insurance, • Disability Insurance, • PTO, • Sick Time, • Employee Appreciation Time, • Paid Holidays Trystar is an Equal Opportunity Employer and is committed to creating a diverse and inclusive environment. We consider all applicants for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, marital status, veteran status, or any other characteristic protected by law. We are committed to providing equal opportunities for all individuals and to fostering a workplace that values diversity, equity, and inclusion.

Job Description Position Title: Materials and Maintenance Technician Join our team of heroes! The Materials and Maintenance Technician is responsible for managing the Equipment and Supply Management (ESM) system, overseeing pre-printed label control and printing for Gulf Coast Blood, and ensuring proper equipment maintenance and compliance documentation for Product Management. This role serves as the primary liaison between vendors and internal teams to support efficient, cost-effective, and compliant operations. Tips to thrive in our culture: Embody our Core Values of Commitment, Integrity, and Respect Work to actively create experiences that inspire others to save lives, each and every day. Embrace doing it right, making connections, and creating desired experiences. Comply with all organizational policies and standards, including safety rules, and be willing to report actual and potential violations to the appropriate supervisor or manager. In this role, you will: Equipment Maintenance and Quality Control Coordinate and support equipment installation, repair, preventive maintenance, calibration, validation, and periodic requalification activities. Maintain equipment in a safe, reliable, and operationally ready condition in accordance with manufacturer specifications and applicable regulatory requirements. Maintain accurate equipment records, including maintenance, calibration, validation, qualification, and service documentation, to support internal and external audits. Serve as the departmental subject-matter expert (SME) for equipment-related processes and the electronic temperature monitoring system. Maintain required competencies and provide training to Product Management staff on the proper operation, cleaning, care, and safe use of equipment. Provide subject-matter expertise and operational input in the evaluation and selection of new equipment and development of annual capital expenditure requests. Partner with operational teams to identify equipment needs, resolve issues, and ensure equipment supports safe, efficient, and effective operations. Assist with product and process validations and other qualification activities as required. Label Control and Documentation Receive, print, document, and perform quality control checks of Gulf Coast Blood pre-printed labels in accordance with established label control procedures. Maintain accurate and traceable documentation related to label issuance, control, reconciliation, and quality checks. Ensure departmental records are organized, current, and readily available to support regulatory and quality audits. Supplies, Inventory, and Vendor Management Manage departmental supplies, equipment, and materials to ensure adequate availability and appropriate quality control. Monitor and maintain critical supply inventories and proactively identify potential shortages or supply risks. Coordinate with external vendors for preventive maintenance, equipment repairs, calibration, service, and return-to-service activities. Place, monitor, and track purchase orders to ensure the department maintains adequate supplies, materials, and services to support efficient, high-quality operations. Maintain effective vendor relationships and follow up on outstanding service, supply, and equipment-related issues. Compliance, Safety, and Audits Serve as the departmental equipment SME during internal, external, and regulatory audits and provide supporting documentation as required. Conduct regular safety audits throughout the Product Management department and coordinate follow-up actions to address identified risks. Perform biannual shipping-container tests and maintain required documentation and records. Perform daily regulated medical waste (RMW) pickup from designated GCB departments and maintain the bio-cage in a clean, safe, and compliant condition. Ensure RMW manifests are accurately reconciled, maintained, and appropriately retained. Maintain departmental compliance with applicable OSHA, FDA, AABB, cGMP, and other regulatory and organizational requirements. Maintain departmental work areas in a clean, orderly, and safe condition in accordance with established CLOR and organizational standards. 5S Program and Continuous Improvement Maintain supply rooms, equipment areas, and departmental workspaces to established 5S standards. Conduct regular 5S audits and identify opportunities to improve organization, efficiency, safety, and workflow. Collaborate with operational teams to identify opportunities to eliminate waste, standardize processes, improve workflow, and sustain operational excellence. Support continuous improvement initiatives that enhance quality, safety, efficiency, and customer satisfaction. We need someone who has:Education High school diploma or equivalent required; associate degree or technical certification preferred. Experience Minimum 2–3 years experience in equipment maintenance and calibration, materials management, or a related field. Knowledge of regulatory compliance in healthcare or manufacturing environments. Experience with vendor management and equipment qualification processes. Certifications / Licenses Certified Quality Inspector (CQI) ASQ is a plus We prefer: • Strong organizational and time-management skills., • Excellent attention to detail and accuracy in documentation., • Ability to interpret and apply regulatory and compliance standards., • Proficient in equipment maintenance processes and vendor coordination., • Strong problem-solving and troubleshooting abilities., • Effective communication and interpersonal skills for cross-functional collaboration., • Familiarity with 5S and continuous improvement methodologies., • Competence in using ESM systems and related software tools. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is frequently required to sit and stoop, kneel or crouch. The employee is occasionally required to stand for extended periods of time and walk. The employee must occasionally lift and/or move up to 30-50 pounds. Employees are required to be familiar with and abide by the team lift requirements as specified in the Safety Program. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Employees may occasionally push or pull wheeled containers weighing up to 150 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Who We Are: Since 1975, Gulf Coast Blood has been one of the nation’s largest community blood centers, serving 170 hospitals across 26 counties. Headquartered in Houston, we support the world’s largest medical complex—the Texas Medical Center—while operating 18 donor centers and hosting more than 7,000 mobile blood drives each year. As an FDA-accredited nonprofit, we provide high-quality human cellular material for both scientific and therapeutic use. Some Jobs Change Lives. Others Save Them. Think you have what it takes to save lives with us? We want to hear from you. EQUAL OPPORTUNITY EMPLOYER STATEMENT Gulf Coast Blood is an Equal Employment Opportunity Employer. Qualified applicants for positions are considered without regard to race/ethnicity, color, religion, national origin, age, pregnancy, sex, sexual orientation, gender identity, transgender status, military status, protected veteran status, disability status, genetic testing results, or any other basis or characteristic prohibited by applicable law, statute, regulation or Executive Order.

Job DescriptionPosition Summary Responsible for safe and efficient movement, identification, handling, and storage of steel materials throughout the galvanizing process. Supports production by ensuring materials are received, identified, organized, and transported between workstations while meeting safety, quality, and productivity standards. Essential Duties and Responsibilities Material Handling and Movement • Move steel materials, bundles, and finished products between workstations, staging areas, and storage locations., • Assist with loading, unloading, positioning, and securing materials., • Identify designated locations for incoming, in-process, and completed materials., • Support transitions through sandblasting, cleaning, kettle operations, and material-handling areas., • Stage materials to support production schedules; maintain clear, organized work areas. Material Identification and Documentation • Verify materials against identification tags, work orders, and manufacturing routers., • Maintain identification and traceability; report missing tags, incorrect materials, or documentation discrepancies., • Follow quality procedures: 8.0 Document and Data Control; 11.0 Identification of Material; 11.1 Material Receiving, Handling & Storage; 12.18 Processing Manufacturing Router. Equipment Operation and Rigging • Use approved material-handling equipment; operate cranes and forklifts only after required training, evaluation, and authorization., • Follow safe rigging practices for slings, chains, hooks, and load securement., • Conduct applicable pre-use inspections and observe equipment load limits and capacity requirements., • Maintain safe forklift travel speeds, avoid obstructions, and report defective equipment. Production Support and Efficiency • Coordinate material movement with galvanizing personnel to maintain workflow., • Follow work orders, production schedules, cycle-time expectations, and supervisor instructions., • Communicate material shortages, obstructions, or workflow delays., • Assist in other production activities as assigned and appropriately trained. Safety and Compliance • Wear required PPE including gloves, eye and hearing protection, and steel-toe boots., • Recognize hazards from moving equipment, suspended loads, and workstation conditions., • Follow emergency procedures, Hazard Communication/SDS guidance, and lockout/tagout awareness requirements., • Report injuries, incidents, near misses, and unsafe conditions promptly., • Participate in required safety training and maintain clean, obstruction-free work areas. Quality Control • Handle materials to prevent damage, misidentification, and loss of traceability., • Verify identification before transfer; report nonconforming or damaged materials., • Follow documented quality instructions and complete assigned training.Qualifications, • Ability to follow verbal and written instructions and recognize material tags, work orders, and basic production documents., • Safety awareness, attention to detail, teamwork, reliable attendance, and willingness to learn., • Preferred: manufacturing, galvanizing, steel fabrication, warehouse, forklift, crane, or rigging experience.Physical Requirements and Work Environment Work may involve prolonged standing and walking, bending, reaching, pushing, pulling, and repetitive material handling in a noisy industrial environment with heat, moving machinery, and outdoor or semi-outdoor conditions. PPE is required. Specific lifting requirements are determined by operational needs and safe-work procedures.