Measurement jobs in Passaic, New JerseyCreate job alerts

Job Description Providing Engineering and Manufacturing solutions since 1955, Triangle specializes in the precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement. Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a difference in people's lives. SUMMARY Perform inspection and quality control activities to support the on-time delivery and quality objectives of the manufacturing groups, adhering to the Quality Management System, all applicable government regulations, and customer requirements. Hours 7:00 AM - 3:30 PM ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Perform 1st piece, receiving, and final inspection activities according to the Inspection Plan and utilizing basic and advanced measurement equipment., • Provide accurate and complete documentation adhering to Good Documentation Practices (GDP) as well as review documentation received from others to ensure GDP compliance, informing management of any issues., • Ensure gages used are in good condition, calibrated, and appropriately maintained in the GageTrak database. Assist production associates with the use of GageTrak as needed., • Provide one-on-one inspection technique or inspection equipment training to production associates as needed to improve competency., • Support engineering and management with the root cause analysis of customer rejections and internal quality failures and the implementation of corrective actions as required., • Sustain housekeeping and 5S efforts in the Inspection areas as well as perform preventive maintenance on the measuring equipment, such as the Comparator and CMM, and others., • Support the implementation of any Quality Control team and/or management process improvements and standardization. Education and/or Experience High school diploma or general education degree (GED) and a minimum of 2 years experience and/or training in mechanical and visual inspection preferably within a regulated industry. • PC Navigation and MS Word experience, • Capable of reading and interpreting blueprints, • Experience in using standard measuring tools and equipment (e.g. calipers, micrometers, probes, CMM, Comparator), • Accurate, detail-oriented, and organized, • Good verbal and written communications skills, • Reliable Triangle does not sponsor for employment visa status. Triangle is proud to be an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Powered by JazzHR rtMup8NLoO

Job Description Providing Engineering and Manufacturing solutions since 1955, Triangle specializes in the precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement. Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a difference in people's lives. SUMMARY Perform inspection and quality control activities to support the on-time delivery and quality objectives of the manufacturing groups, adhering to the Quality Management System, all applicable government regulations, and customer requirements. Hours 3:15 PM - 11:45 PM ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Perform 1st piece, receiving, and final inspection activities according to the Inspection Plan and utilizing basic and advanced measurement equipment., • Provide accurate and complete documentation adhering to Good Documentation Practices (GDP) as well as review documentation received from others to ensure GDP compliance, informing management of any issues., • Ensure gages used are in good condition, calibrated, and appropriately maintained in the GageTrak database. Assist production associates with the use of GageTrak as needed., • Provide one-on-one inspection technique or inspection equipment training to production associates as needed to improve competency., • Support engineering and management with the root cause analysis of customer rejections and internal quality failures and the implementation of corrective actions as required., • Sustain housekeeping and 5S efforts in the Inspection areas as well as perform preventive maintenance on the measuring equipment, such as the Comparator and CMM, and others., • Support the implementation of any Quality Control team and/or management process improvements and standardization. Education and/or Experience High school diploma or general education degree (GED) and a minimum of 2 years experience and/or training in mechanical and visual inspection preferably within a regulated industry. • PC Navigation and MS Word experience, • Capable of reading and interpreting blueprints, • Experience in using standard measuring tools and equipment (e.g. calipers, micrometers, probes, CMM, Comparator), • Accurate, detail-oriented, and organized, • Good verbal and written communications skills, • Reliable Triangle does not sponsor for employment visa status. Triangle is proud to be an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Powered by JazzHR HWIcLqSjN9

Job Description Quality Inspector-Kearny, NJ Must have reliable transportation Pay: $23 to $26 an hour+overtime+benfits Direct Hire Role, Union Shop Third shift: Monday -Friday, 11:00 p.m. through 7:30 a.m. Experience working in metal fabrication or manufacturing facility—Experience working with Aluminum and Sheet Metal-Experience using Calipers, Micrometers and other measuring devices The Quality Inspector role is to inspect and move parts in the various stages of production, including finished goods, to verify conformance to the drawing and internal requirements to meet or exceed the customers' expectations. Job Requirements: • Must have experience in a manufacturing QC environment, including electrical and mechanical assembly inspections., • Experienced operating forklifts in manufacturing environments, • Must have knowledge of how to properly use handheld measurement tools to include decimal and fraction readings., • Proficiency in viewing and interpreting fabrication drawings., • Inspect & move materials or assembled parts and products for defects and deviations from specifications., • Observe and monitor production operations and equipment to ensure conformance to specifications and make or order necessary process or assembly adjustments., • Capture non-conformance information to notify management on process / product issues., • Work with Quality, Environmental, H&S employees to ensure and maintain compliance with safety, operational, and regulatory standards of Quality., • Has the obligation to be aware of and comply with environmental, safety policies and regulations and always endures duties of high-quality standards., • Special assignments as necessary.

Job Description Mission Serve as a senior technical authority in dimensional inspection, measurement systems, calibration, and CMM programming. This role ensures that every inspection method, measurement tool, and calibration activity is accurate, compliant, and capable—directly protecting PTI’s ability to deliver precision injection-molded components for aerospace, defense, and highly regulated industries. Competencies – What This Person Must Be • Master Inspector & Metrology Expert: Advanced skills in dimensional inspection, GD&T, CMM (Calypso), vision systems, fixtures, and measurement troubleshooting., • Calibration & Measurement System Owner: Ensures all tooling, gages, fixtures, and instruments are accurate, controlled, and compliant with AS9100 requirements., • Process-Minded Technician: Understands how inspection results impact production capability, customer acceptance, and risk., • Detail-Oriented & Documentation-Driven: Produces accurate records for calibration, inspection plans, tooling status, and measurement traceability., • Self-Directed and Proactive: Takes initiative to identify and resolve quality risks without being prompted and with minimal supervision; follows through on actions with rigor and accountability., • Leadership & Mentorship: Guides Level 1 and Level 2 inspectors and supports training on measurement equipment, methods, and inspection strategies. Key Responsibilities • Perform highest-complexity inspections and make final accept/reject decisions., • Create, update, and control inspection plans, visual standards, and metrology work instructions to help standardize inspection practices across the department., • Program and operate Zeiss CMMs (Calypso), OGP/Keyence vision systems, and other automated measurement platforms., • Develop fixturing concepts or collaborate with Engineering on inspection fixture design., • Troubleshoot measurement discrepancies, CMM program errors, and complex geometry issues., • Lead inspection readiness for customer source inspections, audits, and critical part reviews., • Own and oversee calibration ensuring all gages, fixtures, and measurement systems are properly maintained, scheduled, fully documented, compliant with AS9100, and supported through effective management of calibration records, out-of-tolerance investigations, and external vendor relationships., • Participate in dimensional-related root cause analysis, contributing measurement expertise during 8D, corrective action, and customer inquiries., • Ensure all inspection processes meet customer and regulatory requirements., • Train and mentor Level 1 and Level 2 inspectors on GD&T, inspection techniques, and equipment use. Key Metrics & KPI’s • ≥ 98% Quality Shipments., • 100% on-time completion of assigned inspections., • Zero escapes on parts inspected or approved., • Improved inspection efficiency and accuracy year-over-year., • 100% compliance with safety and quality procedures, • 100% calibration compliance, • Documented completion of inspector training and demonstrated skill improvement Required Experience and Qualifications (Subject to Management Discretion) • High school diploma or equivalent; technical degree preferred., • 5+ years of advanced inspection experience with strong GD&T and blueprint mastery, • Hands-on CMM programming using Zeiss Calypso, • Experience with OGP/Keyence or similar optical/vision systems, • Experience with calibration system maintenance/management (GAGETrak preferred),, • Strong communication, teamwork, and leadership skills. Preferred Qualifications • ASQ Certified Quality Technician (CQT), Certified Quality Inspector (CQI), or metrology-related certification., • Experience in aerospace, defense, or medical device manufacturing. Physical Requirements • Ability to work in both office and manufacturing floor environments., • Capable of lifting up to 40 lbs and accessing production and inspection equipment., • Manual dexterity for handling tools, parts, and inspection equipment., • Visual acuity sufficient to read documents, use computer screens, and inspect products or components. Work Environment • Manufacturing facility with exposure to injection molding machines, CNC equipment, and secondary operations., • Requires use of PPE, including safety glasses, gloves, and hearing protection.Company DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 38-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 38-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\n\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job Description General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC’s electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards. Essential Duties and Responsibilities • Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements., • Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM)., • Verify material certifications, supplier documentation, and compliance with required standards., • Record and maintain inspection results, nonconformance reports, and supplier performance data., • Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials., • Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions., • Control of MRB and quality hold areas., • Follow and support ISO 9001:2015 quality management processes., • Ensure inspection tools and gauges are calibrated and in good working condition., • Maintain a clean, organized, and safe work area in accordance with company policies. Supervisory Responsibilities None Education/Experience Required • Minimum 2–4 years of experience in a quality control or inspection role., • Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment., • High School Diploma or equivalent required., • Technical or trade school training in mechanical inspection, or a related field is preferred., • Ability to read and interpret engineering drawings, blueprints, and GD&T specifications., • Proficient in the use of precision measuring instruments and inspection equipment., • Understanding of material certification requirements and industry quality standards., • Experience with CMM operation and basic programming a plus., • Strong attention to detail and accuracy in record-keeping., • Familiarity with ISO 9001:2015 quality systems preferred. Computer Skills Necessary • Microsoft Office, • Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent). Physical Demands/Requirements • Ability to stand for extended periods during inspections., • Ability to lift up to 50lbs. occasionally.

Job Description Duties: Performs venous and capillary blood draw for the laboratory testing from the hospital in- and out-patients. Demonstrates excellent phlebotomy skills. Evaluates specimens to determine suitability for testing. Performs EKG and EEG testing. Select, assemble, check for proper function and operation of equipment for use in measurement of brain/heart activity Ensures that critical EKG readings are read immediately by the attending, House or ED physician. Assists supervisor to provide technical instructions and training of new hired personnel in techniques, computer system usage, and organization of work. Evaluates specimens and test orders for acceptability and determines rejections according to established guidelines; accessions specimens with accuracy Labels specimens properly, aliquots samples as required and obtains/distributes to proper departmental section. Reviews quantities and expiration dates of all supplies; monitors inventory of all supplies on a regular basis; notify supervisor to order supplies as needed; stores supplies received and maintains a clean and orderly storeroom. Prepares specimens for reference labs; obtains results from reference labs as needed and ensures the testing results delivered to physicians. Performs all activities related to send-out specimens; resolves issues with reference labs. EDUCATION + EXPERIENCE REQUIREMENTS: High school diploma or equivalent education required. Medical Assistant certification required. Health care certification (i.e. Lab Assistant, Phlebotomist) or prior laboratory or healthcare experience desired. EKG/ phlebotomy skills required. Previous Phlebotomy/Lab Experience Degrees from foreign institutions will require credential equivalency evaluation

Job Description POSITION SUMMARY: The purpose of this position is to deliver comprehensive, quality healthcare in an efficient and cost-effective manner to the people of the community. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Daily interaction with patients, families, guardians and coworkers to assist with patient care in adult medicine, pediatric and gynecology., • Accurately takes and records vital signs, blood pressure, heights/lengths, weights, head circumferences and abdominal girths., • Performs Point of Care testing, to include but not limited to; EKG's, Peak flow measurement, glucose and HgbA1c measurement, urinalysis, urine HCG testing., • Performs phlebotomy as ordered by provider, Performs Point of Care rapid flu, strep, RSV, Covid-19 testing as ordered by a provider. Processes hemoccult samples as ordered by a provider., • Processes labs, follow-s up on lab results per provider directives., • Ensures all documentation is entered into patient chart, per clinical workflows set by SJH., • Rooms patient prior to seeing provider by recording the chief complaint, obtains past medical history, family and social histories for provider to review. Performs medication reconciliation for provider to review., • Ensures all meaningful use measures are recorded accurately for provider review within scope of position and certification., • Coordinates flow of patients, places patients in exam rooms for providers and nurses when ready., • Notifies patient and families if wait time is increased., • Maintains exam rooms, equipment and toys., • Cleans exam room after patient visit, according to SJH Infection Control Policies and Procedures., • Follows opening and closing procedures including but not limited to restocking all exam rooms, assisting with the maintaining of stock levels., • Performs pre visit planning prior to patient appointment by ensuring all results and medical reports are scanned into the chart for the provider to review during the visit., • Calls offices/hospitals/imaging centers for reports., • Manage specific EPIC work queues and in-baskets with training., • Cross trained to front desk to assist with all other office work including but not limited to, answering telephones, scheduling patients, complete patient registration, fax distribution and submissions, filing and scanning., • Collects copayments and account balances., • Posts payments and accurately reconciles; prints payment batches., • Secures insurance referrals., • Ensures insurance eligibility for active coverage., • Collects self-pay balances for services rendered based on time-of-service discounted fee schedule., • Provides coverage to ensure proper staffing when necessary. Must be able to perform opening and closing responsibilities as assigned. SKILLS & ABILITIES: • Ability to handle and complete multiple tasks and assignments;, • Demonstrates active involvement as a team member; and, • Bilingual (Spanish and/or Portuguese) Preferred, • Hight School Diploma, • Graduate from accredited medical assistant program, • Must have active national medical assistant certification (CMA), • Must have active BLS and CPR

Job Description Join a Company That Puts People First! Licensed Practical / Vocational Nurse – LPN/LVN We are one of the largest private duty nursing companies in the nation and growing! At Aveanna, we’re proud to foster a workplace culture that celebrates diversity, encourages connection, and supports our team members every step of the way. Here’s what sets us apart: Award-Winning Culture • Indeed’s Work Wellbeing Top 100 Company in 2024, • Paid Time Off Available, • Flexible scheduling- full-time, part-time, or PRN. Days, nights, and weekend shifts— we will work with your availability!, • 24/7 Local support from operators and clinicians, • Aveanna has a tablet in each patient’s home allowing for electronic documentation, • Career Pathing with opportunities for skill advancement, • Weekly and/or Daily Pay, • Employee Stock Purchase Plan with 15% discount, • Employee Relief Fund We consider it both a privilege and an honor when we welcome a new patient into our Aveanna family. Our homecare is always delivered from a place of heartfelt compassion and empathy, and every one of our Licensed Practical / Vocational Nurses (LPN/LVN)s works together to make sure we achieve outstanding clinical outcomes. Aveanna isn’t just a provider of compassionate homecare to children and adults. We are a national leader. Qualifications • Must have and maintain an active, unencumbered license (LPN/LVN) in the state in which the clinician will practice, • Compact licenses must be transferred to your state of residence within 90 days, • Current CPR certification (with hands-on component)- Aveanna can assist in obtaining this requirement after hire, if necessary., • TB skin test (current within last 12 months), • Six months prior hands-on nursing experience preferred but not required As an employer accepting Medicare and Medicaid funds, employees must comply with all health-related requirements in all relevant jurisdictions, including required vaccinations and testing, subject to exemptions for medical or religious reasons as appropriate. Notice for Job Applicants Residing in California

Job Description Join a Company That Puts People First! Licensed Practical / Vocational Nurse – LPN/LVN We are one of the largest private duty nursing companies in the nation and growing! At Aveanna, we’re proud to foster a workplace culture that celebrates diversity, encourages connection, and supports our team members every step of the way. Here’s what sets us apart: Award-Winning Culture • Indeed’s Work Wellbeing Top 100 Company in 2024, • Paid Time Off Available, • Flexible scheduling- full-time, part-time, or PRN. Days, nights, and weekend shifts— we will work with your availability!, • 24/7 Local support from operators and clinicians, • Aveanna has a tablet in each patient’s home allowing for electronic documentation, • Career Pathing with opportunities for skill advancement, • Weekly and/or Daily Pay, • Employee Stock Purchase Plan with 15% discount, • Employee Relief Fund We consider it both a privilege and an honor when we welcome a new patient into our Aveanna family. Our homecare is always delivered from a place of heartfelt compassion and empathy, and every one of our Licensed Practical / Vocational Nurses (LPN/LVN)s works together to make sure we achieve outstanding clinical outcomes. Aveanna isn’t just a provider of compassionate homecare to children and adults. We are a national leader. Qualifications • Must have and maintain an active, unencumbered license (LPN/LVN) in the state in which the clinician will practice, • Compact licenses must be transferred to your state of residence within 90 days, • Current CPR certification (with hands-on component)- Aveanna can assist in obtaining this requirement after hire, if necessary., • TB skin test (current within last 12 months), • Six months prior hands-on nursing experience preferred but not required As an employer accepting Medicare and Medicaid funds, employees must comply with all health-related requirements in all relevant jurisdictions, including required vaccinations and testing, subject to exemptions for medical or religious reasons as appropriate. Notice for Job Applicants Residing in California

Job Description Join a Company That Puts People First! Licensed Practical / Vocational Nurse – LPN/LVN We are one of the largest private duty nursing companies in the nation and growing! At Aveanna, we’re proud to foster a workplace culture that celebrates diversity, encourages connection, and supports our team members every step of the way. Here’s what sets us apart: Award-Winning Culture • Indeed’s Work Wellbeing Top 100 Company in 2024, • Paid Time Off Available, • Flexible scheduling- full-time, part-time, or PRN. Days, nights, and weekend shifts— we will work with your availability!, • 24/7 Local support from operators and clinicians, • Aveanna has a tablet in each patient’s home allowing for electronic documentation, • Career Pathing with opportunities for skill advancement, • Weekly and/or Daily Pay, • Employee Stock Purchase Plan with 15% discount, • Employee Relief Fund We consider it both a privilege and an honor when we welcome a new patient into our Aveanna family. Our homecare is always delivered from a place of heartfelt compassion and empathy, and every one of our Licensed Practical / Vocational Nurses (LPN/LVN)s works together to make sure we achieve outstanding clinical outcomes. Aveanna isn’t just a provider of compassionate homecare to children and adults. We are a national leader. Qualifications • Must have and maintain an active, unencumbered license (LPN/LVN) in the state in which the clinician will practice, • Compact licenses must be transferred to your state of residence within 90 days, • Current CPR certification (with hands-on component)- Aveanna can assist in obtaining this requirement after hire, if necessary., • TB skin test (current within last 12 months), • Six months prior hands-on nursing experience preferred but not required As an employer accepting Medicare and Medicaid funds, employees must comply with all health-related requirements in all relevant jurisdictions, including required vaccinations and testing, subject to exemptions for medical or religious reasons as appropriate. Notice for Job Applicants Residing in California

Job Description Press Brake Operator Kearny, NJ 3rd Shift $25 to $30 an hour+overtime+benefits Press Brake Operator--Experience with AMADA or TRUMPF preferred Call 843-619-2299 or email for detail Responsibilities: • The machine operator is responsible for all functions related to the daily production output. This position will require the use of computers, CAD programs, basic hand tools, and measurement instruments., • Program, setup and operate a Press Brake Machine preferably AMADA or TRUMPF, • Experience in sheet metal fabrication, • Understanding of limitations and capabilities of punch press machines regarding tooling capabilities, such as clearance dies, countersinks, taps, etc., • Experience in NC coding with capability to edit to job requirements, • Communicate with production leads on meeting demands and following schedules, • Inspect production parts for defects and meets quality standards, • Perform routine maintenance on machinery, • Maintain work area and ensure a clean, safe work environment, • Work with Quality, Environmental, H&S employees to ensure and maintain compliance with safety, operational, and regulatory standards of Quality, • 2 years minimum experience in programming and setup?, • Ability to read and interpret 2D prints, 3D models, and work instructions, • Knowledge of sheet metal and punch assembly tooling, • Ability to use basic measurement instruments to verify components meet requirements, • Ability to communicate verbally, • Excellent time management skills, • Ability to Lift up to 50 lbs, Stand and Bend frequently without issue, • Ability to work in a non-climate-controlled production environment

Job Description Raycap, Inc., an industry leader in manufacturing solutions for telecommunications, renewable energy, transportation, defense, and other applications, is seeking Third Shift Laser Cutting Operators for our Kearny, NJ facility. This is a fast-paced role within a sheet metal manufacturing environment. The Laser Operator is responsible for all functions related to daily production output. This position requires the use of computers, CAD programs, basic hand tools, and precision measurement instruments. Third Shift Schedule: Monday–Friday, 11:00 p.m.–7:30 a.m. Includes an additional shift differential Primary Job Responsibilities: • Program, set up, and operate CNC lasers—preferably AMADA systems, • Collaborate with production leads to meet demand and stay on schedule, • Inspect parts to ensure they meet quality standards and are free of defects, • Perform routine maintenance on machinery, • Maintain a clean and safe work area, • Partner with Quality, Environmental, and H&S teams to ensure compliance with all operational and regulatory requirements, • Minimum of 2 years’ experience in laser programming and setup, preferably with AMADA equipment or similar sheet metal CNC systems, • Ability to read and interpret 2D prints, 3D models, and work instructions, • Knowledge of sheet metal processes, nitrogen usage, and feed rates, • Proficiency with basic measurement instruments to verify component accuracy, • Strong verbal communication skills, • Excellent time management, • Ability to lift up to 50 lbs., and to stand, bend, and move frequently throughout the shift, • Experience in sheet metal fabrication, • Understanding of laser machine capabilities and limitations, including cut settings, • Experience with NC coding, including making edits based on job requirements UNION: IBEW Local Union 3 BENEFITS: Please reference the IBEW Local 3 Union Contract for details on all benefits. • Medical/Dental/Vision/HRA/Annuity - 6 months from date of hire, • Vacation Time - will begin effective June 30th, after 6 months of continuous employment, • Sick Time - will begin accruing from day one, • Mandatory Union Dues - $7/week, $28/month, • Mandatory One-Time $182 Union Application Fee Drug-free workplace.

Job Description Laser / Punch Operator Kearny, NJ 3rd Shift 11pm-7am Mon-Fri $25 to $28 an hour+overtime+benefits Direct Hire, Permanent placement role Laser / Punch Operator--Experience with AMADA or TRUMPF preferred Call 843-619-2299 or email for detail Responsibilities: • The machine operator is responsible for all functions related to the daily production output. This position will require the use of computers, CAD programs, basic hand tools, and measurement instruments., • Program, setup and operate a Laser / Punch Machine preferably AMADA or TRUMPF, • Experience in sheet metal fabrication, • Understanding of limitations and capabilities of punch press machines regarding tooling capabilities, such as clearance dies, countersinks, taps, etc., • Experience in NC coding with capability to edit to job requirements, • Communicate with production leads on meeting demands and following schedules, • Inspect production parts for defects and meets quality standards, • Perform routine maintenance on machinery, • Maintain work area and ensure a clean, safe work environment, • Work with Quality, Environmental, H&S employees to ensure and maintain compliance with safety, operational, and regulatory standards of Quality, • 2 years minimum experience in programming and setup?, • Ability to read and interpret 2D prints, 3D models, and work instructions, • Knowledge of sheet metal and punch assembly tooling, • Ability to use basic measurement instruments to verify components meet requirements, • Ability to communicate verbally, • Excellent time management skills, • Ability to Lift up to 50 lbs, Stand and Bend frequently without issue, • Ability to work in a non-climate-controlled production environment

Job Description Raycap, Inc., an industry leader in manufacturing solutions for telecommunications, renewable energy, transportation, defense, and other applications, is currently looking for second shift Press Brake/Machine Operators in our Kearny, NJ facility. This is a fast-paced position in a sheet metal manufacturing environment. Job Summary: The Press Brake operator is responsible for all functions related to daily production output. This position requires the use of computers, CAD programs, basic hand tools, and measurement instruments. Third shift: Monday-Friday, 11:00 p.m. through 7:00 a.m. Primary Job Responsibilities: • Program, set up and operate a CNC Press Brake, preferably Amada, • Communicate with production leads on meeting demands and following schedules, • Inspect production parts for defects and quality standards, • Perform routine maintenance on machinery, • Maintain work area and ensure a clean, safe work environment, • Experience in sheet metal fabrication, • 2 years of minimum experience in programming and setup, • Ability to read and interpret 2D prints, 3D models, and work instructions, • Knowledge of press brake tooling, • Ability to use basic measurement instruments to verify that components meet requirements, • Ability to communicate verbally, • Excellent time management skills, • Ability to Lift up to 50 lbs, Stand and Bend frequently without issue UNION: IBEW Local Union 3 BENEFITS: Please reference the IBEW Local 3 Union Contract for details on all benefits. • Medical/Dental/Vision/HRA/Annuity - 6 months from date of hire, • Vacation Time - will begin effective June 30th, after 6 months of continuous employment, • Sick Time - will begin accruing from day one, • Mandatory Union Dues - $7/week, $28/month, • Mandatory One-Time $182 Union Application Fee, • 12 Paid Holidays Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

Job DescriptionThe Fitness Coach is responsible for ensuring a positive customer experience and delivering great member service and Private Training. Coaches are responsible for the successful attainment of revenue goals pertaining to Private Training and Supplements. This position requires a minimum of one day on the weekend. ESSENTIAL DUTIES & RESPONSIBILITIES: Sales Execution on Key Metrics • Sell and conduct private and small group training with members., • Assist members and encourage member involvement in private training., • Ensure accurate administration of client programs (dotFIT, supplements, measurement tracking, workouts, etc)., • Arrive on time, prepared and attentive for training appointments., • Assist in revenue generating activities (complimentary workouts, supplement booths, body fat tables, workshops)., • Achieve personal monthly revenue objectives as set forth by the company in sessions, Personal Training and supplement sales., • Conduct guest tours, and complete sales when needed through the Turn-Over process., • Focus on changing lives through Service, Science and Sales., • Be a brand ambassador of UFC Gym and its Train Different philosophy., • Bring T.R.A.I.N (Timely, Ready, Aware, Inspiring, Noble) to life., • Conduct safe and effective private training sessions., • Maintain the organization and neat presentation of the fitness floor and training spaces., • Follow all policies and procedures regarding payment transactions., • Follow all guidelines in the UFC Gym Employee Handbook., • Document daily workouts for liability (adherence to national certification standards)., • Be knowledgeable of club facility and services., • Adhere to the agreed upon schedule set forth by the Fitness Manager., • Daily 1-1 Check-in Meeting with Fitness Manager and Bi-Monthly meetings., • Adhere to meal and rest break periods and must clock in and out for all shift times. ORGANIZATION RELATIONSHIPS: The Fitness Coach reports to the Fitness Manager. This position may interact with all levels of management and staff within Corporate and Field offices, in the clubs, and within the Fitness team. REQUIRED QUALIFICATIONS: Knowledge, Skills & Abilities: • In depth knowledge of Private Training techniques from assessment to program design., • Must be able to adjust and operate all Fitness Equipment., • Knowledge of company policies, practices and procedures, including emergency and safety procedures., • Strong interpersonal and communication skills., • Friendly, enthusiastic and positive attitude., • Ability to understand and follow oral and written instructions., • Possess a strong customer service focus., • Respond professionally to requests and inquiries from guests, members and staff., • Strong organizational and time management skills. Understands basic record keeping practices., • Must be computer proficient with basic skills in Word and Excel., • Ability to work, setup and execute successful weekends. Minimum Certifications/Educational Level: • Current dotFIT certification (or in progress.), • Current CPR/AED certification (or in progress.), • Certification from organization recognized by UFC Gym (or in progress.), • High school diploma or general education degree (GED.), • 4-year Degree in a related field recognized by UFC Gym (preferred.), • Current USA Wrestling Copper Certified (for wrestling coaches.) Minimum Experience: • 1 year of related experience (preferred) Physical Requirements: • Must be able to stand for up to 8 hours a day., • Must be able to regularly lift heavy weights, squat, bend, reach, and spot., • Must be able to frequently lift and /or moves up to 45+ pounds. This position description intends to describe the general nature and level of work being performed by people assigned to this job. It is not intended to include all duties and responsibilities. The order in which duties and responsibilities are listed is not significant. Base compensation may vary based on location, skills and other related factors.

Job DescriptionGENERAL SUMMARY: The Recovery Corner Manager is responsible for personally ensuring a positive customer experience through personal production and coach supervision. Responsible for delivering excellent member service and driving Fitness and Recovery Corner revenue and meeting goals. Will address member concerns, employee relations issues, and oversee scheduling and time-keeping activities as needed. Communicate and enforce Company and Club policies and procedure on a regular basis. This position requires week days and a minimum of 8 hours on the weekend on either Saturday, Sunday or a combination of both days. ESSENTIAL DUTIES & RESPONSIBILITIES: Ensure accurate administration of Client Programs, supplement purchases, measurement tracking, workout and recovery programs. Arrive on time, prepared and attentive for all appointments. Assist in all revenue generating activities, including but not limited to: complimentary workouts, recovery booths, body fat tables, seminars, workshops, etc. Sell training & recovery sessions by executing an effective prospecting strategy, conducting guest tours, and completing sales when needed through the turn-over process. Responsible for achieving monthly revenue objectives set forth by the Company with regards to fitness, recovery and supplements. Review daily club sales performance and individual employee performance statistics with the Fitness Manager, Vice President and team members to identify issues and clarify behaviors needed to achieve club sales goals. Administer company policies as they relate to the sales process. Set monthly, weekly and daily goals and objectives aligned with Companys expectations. Conduct monthly and weekly meetings with the Fitness Manager to review performance and operations. Handle member service matters including club tours, explanation of Recovery Corner services, and member sign ups, agreements and appointments. Mediate and resolve member issues and concerns in a timely and effective manner, elevating issues when appropriate. Perform and manage the completion of all administrative and housekeeping duties within the Recovery Corner (as outlined in daily and weekly checklists). Conducts daily facility walkthroughs and alert the Operations team of repairs and maintenance needs. Supervise coach sales activities, agreements and daily paperwork. Comply with operational procedures in the Recovery Corner and follow-up with compliance checks through the monitoring of club systems and employee performance. ORGANIZATION RELATIONSHIPS: The Recovery Corner Manager will report directly to the Fitness Manager and/or General Manager. Communicate and enforce all Policy and Procedures with the Fitness & Recovery Corner Team. Duties require interaction with all club management, employees and club members. REQUIRED QUALIFICATIONS: • Adhere to meal and rest break periods and must clock in and out for all shift times. This position description intends to describe the general nature and level of work being performed by people assigned to this job. It is not intended to include all duties and responsibilities. The order in which duties and responsibilities are listed is not significant.

Job Description General Description Responsible for undertaking a variety of activities in the office, including filing, answering the phone, organizing documents, basic money handling, and more. Reliability and a strong work ethic combined with great communication skills are a must, as well as familiarity with all necessary office equipment, software, and procedures. Tasks & Responsibilities A. Essential Duties • Greet clients and set a positive office atmosphere., • Answer and field phone calls at high call volume and direct to appropriate party., • Operate Office Equipment., • Receive and send out mail to Marlton Administrative Office., • Facility Scheduling and appointment confirmations., • Manage Appointments (Checking clients in and out)., • Assessing Missed Appointment Fees., • Assure all intake paperwork is complete and saved to chart., • Upload records and client documentation., • Complete Prior and ADHD Authorizations., • Facilitate ADHD Screenings., • Clinical/Medical Support., • Communicate and facilitate appointment and schedule changes., • Send TH appointment links., • Send correspondence and assignments on behalf of clinicians., • Receive assignments and upload to chart., • Schedule Psychiatric F/U and ADD Screenings., • Send out Lyft Links for TMS clients., • Execute patient letters and requests for D/C and R/0., • Assist with med refill coordination., • Complete medication prior authorizations (Medline Only)., • Triage and coordinate medication processing with pharmacies (Medline Only)., • Coordination and retrieval of lab orders through LabCorp and Quest., • Assists and covers other staff when necessary to maintain high productivity and efficiency in the department., • Create Meaningful Connections: Demonstrates ability to function effectively as a part of team. Uses outstanding oral and written communication with employees at all levels of the business for support and sharing of information., • Take Accountability: Take constructive feedback and prevent discourse among our peers., • Live in the Solution: Critically thinking should be the solution when problems arise. Having the ability to accepts constructive criticism well in an open and non-defensive manner., • Be Professional: Wear business casual attire (please see dress code policy). Competencies • Adaptability, • Customer Service, • Decision Making, • Dependability, • Ethics, • Interpersonal Skills, • Job Knowledge, • Conflict Management, • Organization Skills, • Productivity, • Self-Development, • Teamwork Performance Standards & Measurement • Compliance with essential and incidental duties; compliance with company policies and procedures., • Compliance with state and federal laws and regulations applicable to the business. Equipment, Tools & Machines • Use of computer, telephone, and other office equipment such as a printer and fax., • Use of company network and email domain. Working Conditions • Air conditioned and well-illuminated office environment and outdoor environment., • May have several responsibilities at once. Interaction with other is constant and can be interruptive., • Work may be stressful at times due to high level workflow., • Availability to work flexible hours including weekends, holidays, and evenings as is required to comply with the purpose of the job and accommodate client needs., • Participates in educational training, orientations, or compliance programs as needed to maintain competency., • If you must leave your employment with our company, we request employee’s to give us at least 14 days resignation notice in writing. Demands • Enthusiastic self-starter operating with sustained energy and showing great initiative., • Comfort working with a diverse base of support, including members, employers, providers, colleagues, community leaders, volunteers, non-profit organizations, vendors, etc., • Excellent interpersonal and communication skills, including ability to read, write, spell in English legibly and without excessive grammatical or communication errors., • Talk and hear both by person and by telephone; ability to speak clearly and effectively using proper grammar before patients, employees and business partners, among others., • Excellent organizational skills., • Accepts constructive criticism well in an open and non-defensive manner.Ability to manage conflicting priorities. Ability to maintain a positive work ethic and a congenial attitude in the face of a high-pressure environment. · Ability to function independently and with flexibility., • Ability to work under pressure, handle multiple tasks and interruptions., • Occasional lifting of moderately heavy office supplies; ability to lift supplies for community events, trade shows, conferences, and other marketing opportunities applicable to the organization; ability to lift, push or pull up to 25lbs., • Ability to sit, stand, or walk for extended periods of time., • Must have strong computer skills to meet Microsoft Office and Electronic Health Record software requirements. Qualifications Education: • High school diploma or equivalent required, • Current CPR Certification, • Successful work experience in a front office setting or in another clerical position,, • Strong working knowledge of office procedures and basic accounting principles, • Experience in medical field is highly desirable., • Computer literate: Microsoft Office (Excel, Word, and PowerPoint) required. Mon - Fri 12:30pm-9:00pm

Job DescriptionBenefits: • Bonus based on performance, • Health insurance, • Training & development We Empower the Fighting Spirit in You! We Offer • Compensation package: Competitive base salary plus bonus., • Comprehensive health benefits: Full coverage for medical, dental, and vision., • Generous paid time off: Ample vacation days, personal leave, and holidays., • Free membership perks: Complimentary access to all our fitness centers., • Employee discounts and special offers: Exclusive deals on fitness products and wellness services., • Flexible scheduling tailored to your needs: Work hours that fit your personal and professional commitments., • A fitness-focused workplace vibe: On-site fitness classes, wellness programs, and a supportive community., • Free or discounted recertification (NASM, ACE, ISSA): Maintain and upgrade your certifications at little to no cost., • Ongoing in-house training: Regular workshops and training sessions., • Assist members and encourages their involvement in private training., • Ensures accurate administration of client Programs, supplement purchases, measurement tracking, workout programs., • Assists in all revenue generating activities, including but not limited to: complimentary workouts, supplement booths, body fat tables, seminars, workshops, etc., • Sells training sessions. Executes an effective prospecting strategy and conducts guest tours., • Responsible for achieving monthly revenue objectives set forth by the Company with regard to fitness and Supplements., • Reviews daily club sales performance and individual employee performance statistics., • Performs various administrative and housekeeping duties within assigned areas as needed., • Alerts the Operations staff of repairs and maintenance needs in the club. Personally conducts facility walk through daily., • In depth knowledge of Personal Training techniques from assessment to program design., • Strong interpersonal and communication skills., • Possesses a strong customer service focus., • Possesses strong organizational skills. Understands basic record keeping practices and procedures. Demonstrates the ability to organize and prioritize multiple tasks., • Must be computer proficient, with basic skills in Microsoft Word and Excel., • Current CPR/AED certification, • High school diploma or GED., • The ultimate Big Gym experience, UFC GYM raises the bar of what big-box gyms should offer their members.

Job Description Founded in 1968, HYTORC is the worldwide leader in industrial bolting solutions. Our mission is to optimize safety, quality and schedule, in industrial bolting through innovative solutions and an unyielding commitment to world class customer service. With over 55 years of experience focused entirely on developing new technologies for hydraulic, electric and pneumatic torque wrenches, while creating a worldwide 24/7 service network, HYTORC has become the most trusted name in the industry. Today HYTORC boasts a series of smart bolting systems that communicate with in-house developed apps for system control, data exchange, and software updates. We are proud to be recognized as the innovation leader in our industry, providing award winning solutions to leading businesses globally. Our customers are in various industries, not limited to Oil & Gas, Wind Power, Nuclear, Aerospace, Transportation including SpaceX, GE, NFL Stadiums, Boeing, Tesla and many more. General Purpose: The Compliance Manager is responsible for implementing and maintaining HYTORC’s Quality Management Systems, handling the day-to-day quality activities in our South Hackensack location, coordinating calibration activities globally and driving continuous improvement. Essential Duties and Responsibilities • Implementing, maintaining and driving continuous improvement of HYTORCS QMSs and accreditation’s, including ISO/IEC 17025, ISO 9001:2015, TUV, KHNP, AD2000, and ISO 80034 Ex Products System, for domestic and international locations., • Managing quality issues and customer complaints., • Facilitating root cause analysis, implementing problem appropriate corrective and preventive actions., • Conducting internal and supplier audits against appropriate standards and guidelines., • Hosting UL/ETL routine inspections and handling issues that arise., • Coordinating with Calibration Lab Managers on quality and equipment needs and issues., • Routinely auditing calibration activities for potential process deviations., • Developing and maintaining uncertainty budgets for the calibration laboratories., • Developing, monitoring, and maintaining repeatability and proficiency tests used for trend analysis., • Designing and evaluating standard operating procedures for calibration asset management software and uncertainty software for laboratory calibration standards and customer calibration events., • Assisting Engineering with the evaluation of new calibration methods and procedures., • Using statistical techniques to analyze and validate measurement standards and processes., • Ensuring that intermediate checks are performed on calibration standards,, • Authorizing short term extension of intervals on HYTORC standards when requested and to meet HYTORC needs based on valid reasons for interval extension or end of period reliability data., • Supervising the laboratory’s inter-laboratory proficiency testing program and ensuring it is maintained., • Providing training on all QMSs, including re-verification of all personnel as necessary to maintain confidence in tests and/or calibrations performed., • Providing leadership and guidance to the Quality and other departments., • Coordinating with HYTORC’s service department to support actions associated with customer feedback., • Compliance Team (2 Associates), • Additional resources may be added over time as we grow, and needs identified Education/Experience Required • Bachelors degree in a technical field or 8 plus yrs of related experience, • ISO/IEC 17025 (minimum of 5 years’ experience). Experience in calibration and metrology for force/torque and pressure., • ISO 9001:2015 (minimum of 5 years’ experience)., • Three years of experience supervising and managing personnel., • Must be able to understand and interpret statistical data and read drawings, • Excellent communication skills to interface with the customer (internal and external) and with all levels within the organization., • Excellent problem-solving skills., • Microsoft Excel, Word and PowerPoint., • SAP and/or other ERP Systems Physical Demands/Requirements • Ability to lift 30 lbs. with assistance., • Ability to travel domestically and internationally up to 40% of the time. Work Environment: Office, Warehouse, and Labs. The actual base salary a successful candidate will be offered will vary based on factors relevant to the position, as well as geography of the selected candidate. The salary range for this role is $110,000 - $125,000. The actual base salary a successful candidate will be offered within this range will vary based on factors relevant to the position. #LI-GC1 #ZR

Job Description Role Overview: The Regional Nursing Lead will contribute to the company’s quality and growth by training and coaching Infusion Nurses in their region on clinical topics. This role will also ensure ongoing competency proficiency and answer clinical questions from nurses in the Region. The Regional Nursing Lead will make sure our patients receive the highest level of care possible in infusion therapy by ensuring clinical staff are trained and re-trained appropriately. Location: Remote, with ~50% travel to centers for training and coaching Job Description: * Train new Infusion Nurse hires on-site, providing feedback where necessary * Drive ongoing clinical effectiveness through competency validation, clinical quality measurement, coaching, and feedback * Identify additional training needs across the Region and pilot new initiatives * Serve as initial point of contact for clinical questions from others in Region * Provide clinical care, as necessary Key Qualifications: * Current RN licensure in all states within Region (or ability to gain licensure in all states) * 3+ years of infusion nursing experience and expert infusion clinical knowledge (or strong internal performance that indicates this level of experience) * Ability to travel up to 50% of the time for hands on training and re-training of nurses As part of our team, full-time team members get: * Medical, dental, and vision insurance through our employer plan * Short and long-term disability coverage, life insurance * 401(k) — as an early stage startup, and we match! * 15 Days PTO — and we want you to take it! * Competitive paid parental leave and flexible return to work policy. * We invest in your career. Our company is growing quickly, and we'll give you the opportunity to do the same. You'll have access to a number of professional development opportunities so that you can keep up with the company's evolving needs and grow your career along the way. We don’t discriminate—Local Infusion is an Equal Employment Opportunity (EEO) Employer. We fundamentally believe that a more diverse and inclusive team leads to a stronger company more able to achieve our vision. Join our dynamic team and make a difference in the lives of patients by leading the successful operation of our regional infusion centers. Apply today to be considered for the role of Regional Nursing Lead.

Job DescriptionAre you ready to join a growth-oriented team where creativity meets innovation? At Ware Malcomb, we are a dynamic and forward-thinking design firm committed to pushing the boundaries. Our team-oriented, collaborative approach ensures that every project is a blend of visionary design, seamless project delivery, and we are actively engaged with both the community and the industry. Discover our vibrant culture to get an inside look into life at Ware Malcomb and the programs we offer. The Civil Engineering Manager is a key member of the Ware Malcomb senior management team, responsible for the growth, revenue, profitability, staff management and overall client relationships for the North East civil engineering market. As Civil Engineering Manager, you will also be responsible for nurturing a positive, team-oriented environment, ensuring financial goals and deadlines are being met, assisting in business development and managing select projects. Ware Malcomb offers a great opportunity to lead a civil engineering practice, while benefiting from the platform, resources and support provided by an international, multidisciplinary design firm. Your Role • Prepare proposals and contracts for civil engineering projects, • Review of project revenue projections, monthly financial reports and monthly business reports, • Manages select projects, • Responsible for the growth and profitability of group, • Attend hearings and planning meetings, • Consistently market and promote getting new work for Ware Malcomb, • Attend relevant networking functions and set up regular meetings with clients, • Responsible for operations of the group, • Train, mentor and oversee the work of team members, • Responsible for recruiting and hiring new team members Qualifications, • 10+ years of civil engineering experience, specifically in the field of Land Development, • Experience at the Project Manager or Senior Project Manage level. Prior leadership experience preferred., • Experience developing and maintaining client relationships, • Professional Engineer (PE)

Job Description About Futu US Inc. Futu US Inc. stands at the forefront of financial services, housing two SEC registered broker-dealers alongside a cryptocurrency brokerage — all operating under the reputable wing of Futu Holdings Limited (Nasdaq: FUTU). Our core mission revolves around innovating the investing landscape through a digitized brokerage and wealth management platform that's designed to elevate the investment experience. Here's a closer look at our key entities: • Futu Clearing Inc.: An SEC registered FINRA member dedicated to delivering top-tier clearing and execution services globally., • Moomoo Financial Inc.: As an SEC registered FINRA member, we provide retail investors access to both U.S. and Asian securities markets, ensuring your investment journey is backed by expertise. About the role: We are seeking an experienced and innovative Growth Marketing Manager to lead our marketing efforts targeting stock, options, and crypto traders in the U.S. This role will be pivotal in developing and executing data-driven growth strategies to expand our retail brokerage business in the U.S. market, with a strong focus on user acquisition, retention, and channel optimization. This role must be based on the office locations specified in the job description, in line with our in-office work philosophy. Remote work is not available for this position. For more details about our in-office approach and expectations, please reach out to the recruiter. Key Responsibilities: • Growth Strategy Development: Design and implement comprehensive marketing strategies aligned with user acquisition and overall business growth objectives., • Channel Partner & Go-to-Market: Create detailed go-to-market strategies for acquisition channels and in-app resources, maximizing reach and conversion., • Multi-Channel Campaigns: Build and execute growth campaigns across performance marketing, influencer marketing, 3rd-party partners, and social media platforms., • Value Proposition Creation: Craft compelling messaging tailored to different user and partner segments, highlighting unique platform advantages., • Budget & ROI Ownership: Manage multi-channel marketing budgets with accountability for ROI, optimizing spend for maximum growth., • Cross-Functional Collaboration: Partner with product, data, and acquisition marketing teams to ensure consistent messaging and coordinated growth execution., • Co-Marketing Programs: Develop collaborative marketing initiatives with partners to accelerate acquisition and engagement., • Market & User Insights: Analyze market trends, user behaviors, and competitor strategies to inform and refine growth marketing tactics., • Performance Measurement: Execute, track, and report on campaign performance with actionable insights and recommendations for continuous improvement. Qualifications: • Bachelor’s degree in Marketing, Business, or related field., • 5–8 years of marketing experience, with at least 3 years in a growth or acquisition-focused role, ideally in financial services or retail brokerage., • Proven track record of scaling user acquisition and executing successful multi-channel growth campaigns., • Experience in digital marketing, influencer marketing, brand campaigns, and social media growth strategies., • Familiarity with financial services marketing and regulatory requirements. What We Offer: • Comprehensive Paid Medical Benefits: We prioritize your health with a robust medical benefits plan that covers you and your dependents, • 401k Employer Contribution: We match your contributions to help you grow your retirement savings, • Generous Paid Time Off & Paid Holidays: Take the time you need to recharge and pursue your passions with our generous paid time off policy, • Opportunities for Professional Growth & Development: Invest in your future through hands-on learning, skill-building, and cross-functional work Base pay for a successful applicant will depend on a variety of job-related factors, which may include education, training, experience, location, business needs, or market demands. The expected salary range for this role is $100,000-$130,000. This role is also eligible to participate in our discretionary bonus plan. Disclaimer: The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Futu Holdings Limited, including all subsidiaries, is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability status, protected veteran status, or any other characteristic protected by law. Warning about fake job posts: Please be aware of fraudulent job postings by persons not affiliated with Futu, moomoo, or their affiliates. Criminals may use fraudulent job postings to obtain your personally identifiable information and/or financial information to steal your identity and/or money. All communications to you will come from a business email address. We do not hire through text message, social media, or email alone, and any interviews will be conducted in person or through a video call. We will not ask you for bank account information nor ask you to pay anything during the hiring process. If you see suspicious activity or believe that you have been the victim of a job posting scam, you should report it to your local FBI field office or to the FBI’s Internet Crime Complaint Center.

Job DescriptionThis is a temporary 6-month contracted 1099 position with no benefits. • Interprets customer specifications to define requirements for mechanical designs., • Performs first principal analysis related to appropriate aspects of mechanical design., • Applies the 3D CAD system to create mechanical design and drawings., • Develops detailed fabrication and assembly drawings and performs tolerance analysis., • Develop prototypes for design evaluation., • Troubleshoot and resolve design & processing issues., • Contributes to details of design documentation using electronic documentation systems., • Collects, analyzes and interprets data to propose recommendations., • Develops & execute design verification protocols and technical reports., • Work with internal and external resources on fabrication, inspection, and testing of new product parts and assemblies., • Develop & debug prototype tooling / equipment and processes., • Develop test methods and fixtures., • Formulate plans & methods to accomplish assignments with appropriate oversight., • Works independently and prioritizes assigned tasks with guidance., • Contribute to project planning activities., • Design for Manufacturability and Assembly, DFM&A (cost/tooling/process considerations), preferably using SolidWorks CAD software., • Understanding in design and development of injection molded plastic, plastic extrusion, casting, sheet metal, metal stampings, additive manufacturing processes, and machined metal components, and assemblies with high part counts highly desirable., • Knowledge of mechanical design and development using metric ANSI/ISO dimensioning and drafting standards highly desirable., • Understanding of GD&T, mechanical measurement and testing equip., and statistical analysis of test data., • Experience with electronic document control systems in medical device and/or medical equipment design and development., • Highly skilled at analytical reasoning, mechanism design, creative problem solving, and mathematical analysis., • Ability to create and meet scheduled timelines (manage and coordinate tasks as required)., • Ability to work in a team environment., • Strong communication skills., • Competent in use of Microsoft Office tools., • Ability to operate test equipment such as various pressure and flow measurement equipment, temperature/humidity chambers, PC-based data recorders, simulators, DVM’s and oscilloscopes., • Familiarity and the ability to operate basic shop equipment such as hand tools, a drill, and Dremel., • Understand & interpret simple wiring diagrams., • BS in engineering discipline, mechanical preferred., • Minimum 2-4 years related experience, or an MS and less than one year experience., • Experience with a solid modeling CAD program, preferably Solidworks., • Experience in medical equipment / device design with experience in electromechanical, electro-pneumatic, and/or blood pumping equipment development., • Knowledge in medical device industry regulations and practices – ISO 13485, ISO 7198 & GMP., • Proficiency with Microsoft Windows, MS Office applications, and Adobe Acrobat., • Experience with Microsoft Visio and Microsoft Project preferred.#LI-RS1 Important Notice: Protecting Your Information Medvacon Talent Acquisition only conducts initial video interviews via Microsoft Teams or Zoom. All communication will come from an email address ending in @medvacon.com. If you receive a message that seems suspicious or is not from our official domain, please report it immediately to . Powered by JazzHR c1QYkE11NQ

Job Description Any Moving and interview costs are not reimbursable. May require in-person interview in Jersey City. ON-SITE / Hybrid as per supervisor's discretion. Salary: Pls send your salary requirements per year with resume in word format Macon Pace Inc., Management Consultants and located , NJ has immediate openings for qualified Engineering Project Control Specialist in Jersey City area with Port Authority. See below for details Minimum Requirements (Project Controls – Scheduling) • Bachelor's degree in Architectural, Engineering or related degree, • +7 years of professional experience in Construction Management and Scheduling, • Experience using Primavera P6, Microsoft project is a plus, • Strong communication skills, oral and written, • Experience in Baseline and Update Reviews, • Provide technical guidance to the Project Controls specialist/support staff, • Coordinate efforts for effective implementation of enterprise scheduling software, Oracle Primavera P6, • Provide project control support for major projects, develop and maintain project schedules, • Prepare monthly, quarter performance and ad-hoc cost /schedule reports, • Prepare performance measurement reports on schedule variance, cost variance based on critical path analysis and schedule risk analysis, • Maintain engineering resource codes in P6, • Manage monthly project status and resource codes updates, • Document project controls execution plan, project controls procedures, and coordination of progress reports, • Develop Engineering Project Controls and scheduling guidelines, • Updating schedules in Oracle’s Primavera project scheduling software on a monthly basis or as needed in concert with the project managers;, • Reviewing project status with project managers including scope, schedule and costs;, • Creating and maintaining resource loaded project schedules in Oracle’s Primavera project scheduling software;, • Maintaining proper project and activity codes in the Primavera system;, • Assist assigned project managers and others as required in the preparation of project budgets; updating project forecasts; establishing, maintaining and closing account codes; and preparing monthly and ad-hoc project/program status and performance reports;, • Support the business Department in Capital Planning prioritization., • Perform project/program/portfolio cost and schedule analysis Submit : Resume and Salary General Tasks • Project management, scheduling, cost control, project proposal preparation or other management/control services;, • Analyzing, providing design and programming services;, • Implementing procedures and systems utilized in project budgeting, schedules and resources;, • Utilizing Oracle’s Primavera software for monthly schedule updating, creating and maintaining resource loaded project schedules, maintaining project and activity codes., • Preparing executive level summary reports, project proposals, budgets, establishing, maintaining and closing account codes., • Providing training and technical assistance in Authority project control systems and enhancements., • Coordinating and mentoring lower level project control specialists., • Assist Program Director and Program Managers in preparation of executive level summary reports;, • Project control concepts, processes and procedures, cost control, project and performance reporting, scheduling, risk management protocols, capital planning and assessment., • Ability to achieve complex goals within tight time frames and simultaneously manage several assignments., • Extensive experience in managing and influencing diverse work groups and project teams., • Proven ability to work independently and effectively on the topics of decision-making, problem solving and negotiations., • Bachelor of Science in Engineering, Accounting, Economic or Business Administration or Project Management Professional certification with degree in technical field, • Minimum 5+ years of experience in related project industry, • Proficiency in Microsoft Office and Oracle/Primavera software, • Valid driver’s licenseCompany DescriptionMacon Pace, Inc. (MPi) was founded in 2000 and the main office is located in Hamilton, New Jersey. MPi is a Management Consulting Engineering Company that specializes in Construction Management and Inspection, Project Control Services, as well as Civil, Structural, Roadway, Electrical and Security Systems, ITS Engineering Design and Computer Aided Drafting (CAD) services within the transportation industry. We keep all interests confidential and offer full benefits package including medical,short and long term disability, Unemployment Insurance, PTO, 401k with Company Match for full time permanent employees onlyMacon Pace, Inc. (MPi) was founded in 2000 and the main office is located in Hamilton, New Jersey. MPi is a Management Consulting Engineering Company that specializes in Construction Management and Inspection, Project Control Services, as well as Civil, Structural, Roadway, Electrical and Security Systems, ITS Engineering Design and Computer Aided Drafting (CAD) services within the transportation industry.\r\n\r\nWe keep all interests confidential and offer full benefits package including medical,short and long term disability, Unemployment Insurance, PTO, 401k with Company Match for full time permanent employees only

Job Description Job Title: Sr. Manager, Analytics Job Type: Full Time, Exempt Reports To: CMO Location: Buena Park, CA or Ft. Lee, NJ SUMMARY We are seeking a strategic and hands-on Sr. Manager, Analytics to lead our data and analytics function, driving insights that shape brand, operations, and customer experience strategies across our growing restaurant business. This role will transform raw data into actionable recommendations that improve decision-making, optimize performance, and support both corporate and franchise markets. The Sr. Manager will collaborate closely with cross-functional partners to deliver reporting, forecasting, and advanced analytics that support both day-to-day business needs and long-term growth strategies. JOB DUTIES (include but are not limited to the following) • Analytics Strategy & Execution o Build and execute an enterprise-wide analytics strategy to improve decision-making across the business. o Develop scalable reporting tools, dashboards, and KPI frameworks to measure performance across sales, marketing, operations, and customer experience. o Leverage data science techniques (forecasting, segmentation, predictive modeling) to identify business opportunities and risks. o Partner with senior leadership to translate analytics into actionable business strategies. o Build a culture of data-driven decision-making across the organization. • Cross-Functional Collaboration o Partner with Marketing and Operations teams to measure campaign effectiveness, menu performance, and guest experience drivers. o Work with Finance to support budgeting, forecasting, and profitability analysis. o Collaborate with Supply Chain and IT to ensure data accuracy, system integration, and scalable analytics infrastructure. o Present insights and recommendations to the C-Suite and franchise partners. • Data Governance & Infrastructure o Ensure accuracy, consistency, and reliability of all business data sources. o Partner with IT to evolve data warehouse and business intelligence tools. o Champion best practices in data management, reporting, and visualization. • Performance Measurement o Establish KPIs that track business health and operational performance at both corporate and franchise levels. o Monitor trends, identify anomalies, and provide proactive recommendations to improve business. o Create and maintain executive dashboards that provide real-time visibility into performance. WHY JOIN US? • Lead the build-out of a modern analytics function during a time of growth and transformation., • Work in a fast-paced, entrepreneurial environment with leaders who value data-driven insights., • Competitive compensation, benefits, and opportunities to shape the future of the brand., • Make an impact across the full business—from marketing and operations to customer experience. QUALIFICATIONS & SKILLS • Bachelor’s degree in Analytics, Statistics, Business, Finance, Economics, or related field., • 5+ years of experience in analytics, business intelligence, or data strategy., • Proven success building analytics functions, tools, and reporting systems in a fast-paced, multi-unit environment (restaurant or retail experience strongly preferred)., • Strong technical expertise with SQL, BI tools (e.g., Tableau, Power BI, Looker), and advanced Excel. Experience with statistical tools a plus., • Ability to translate complex data into clear, actionable recommendations for non-technical audiences., • Exceptional communication, storytelling, and presentation skills, including comfort presenting to leadership., • Hands-on – equal parts strategic leader and scrappy doer, knowing how to build scalable systems, yet not afraid to roll up your sleeves., • Strong project management and prioritization skills, with ability to manage multiple initiatives simultaneously., • Collaborative leader who can influence cross-functional teams and franchise partners., • A passion for food and an understanding of customer trends in the bakery market., • Proficient in MS Office – Excel, Word, PowerPoint.

Job Description ELLKAY started out providing connectivity solutions to laboratories and within a few years, grew to also provide data management solutions to ambulatory organizations. ELLKAY is now a trusted data management partner in five healthcare segments. ELLKAY’s solutions continue to serve laboratories and ambulatory practices and have expanded to empower hospitals and health systems, healthcare IT vendors, ambulatory practices, health plans, and other healthcare organizations with cutting-edge technologies and solutions that drive their growth and interoperability strategies. Today, ELLKAY remains true to our core values, building strong partner relationships and offering unparalleled service and support while providing innovative, scalable solutions to the challenges our customers face in today’s data-rich world. ELLKAY's experience, customer-focused approach, and reputation for innovation, speed, and accuracy differentiate ELLKAY as a premier partner for your interoperability needs and data management strategy. Job Description: This role leads the organization, management, and optimization of product operations, driving clarity, consistency, and efficiency across teams. Essential Duties & Responsibilities: BASE (First 90 Days): Leverage AI to document and organize core product operations functions, establishing clarity and structure, with a focus on tying product performance to financial outcomes. GROWTH (Next 6–12 Months): Build automated measurement frameworks and KPI models to optimize product operations, leveraging AI to enhance visibility and decision-making. FUTURE (Beyond 12 Months): Drive a programmatic performance culture through cross-functional leadership, accelerating the pace of innovation across the organization. Key Activities • Document and organize product operations practices for consistency and clarity, • Build and manage an operational cadence for daily, weekly, monthly, and annual planning and deliverables, • Manage analytics, reporting, and feedback loops within the product department and across the organization, • Collaborate with engineering and delivery teams on capacity planning, prioritization, and throughput, • Integrate product performance reporting with financial outcomes to support strategic decision-making, • Expertise in product, portfolio, and operational planning, • Expertise in cross-functional leadership within product-led SaaS and engineering environments, • Expertise with both cloud-based and legacy software deployment models, • Expertise in KPI development and executive-level reporting, • Expertise with workforce management tools such as Aha!, Monday.com , Asana, and Jira, • Experience with a variety of SDLC methodologies, including Agile, Kanban, and others, • Experience in business and operational planning practices, • Demonstrated success in transitioning a startup product operations environment into a scalable, growth-phase organization, • Proven experience with generative AI and AI-driven operational optimization, • Strong track record of driving operational efficiency through KPI identification, tracking, and management, • Demonstrated achievement of financial performance goals, including both top-line growth and bottom-line efficiency ELLKAY offers a comprehensive and competitive benefit package that starts day one! Including: • Medical, Dental, and Vision benefits, • Employer-paid Life and LTD, • 401k w/ matching – once eligibility is met, • Work/life balance, • Paid Volunteer Program, • Flexible working hours, • Generous FTO, • Remote work options, • Employee Discounts, • Working with talented, collaborative, and friendly people who love what they do, • Professional growth within, • Innovation environment At ELLKAY, we are committed to operating as a hybrid workplace, offering employees flexibility in how they structure their time between in-office and remote work. We recognize the significance of fostering connections, collaboration, and creativity within our office culture and its positive impact on our business. Our philosophy of operating as a hybrid workplace underscores our dedication to enabling employees to tailor work-life balance to their individual preferences. For those who do not live within 40 miles of one of our offices, we are open to considering remote work for candidates whose skills and experience strongly align with the role. While we prioritize a hybrid work environment for most roles, we understand the importance of flexibility and are open to remote work for specific positions and specialized skill sets. For more information on our company, visit . ELLKAY LLC is a Smoke-Free Workplace. ELLKAY, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionJob Title: Handyman Company: Safe Nest Repairs LLC Location: jersey city Nj (On-site) Job Type: Full-Time or Part-TimeBuild With Us at Safe Nest Repairs LLC At Safe Nest Repairs LLC, we’re proud to offer dependable, high-quality home repair services to homeowners across the jersey city Nj ( area. As we continue to grow, we’re seeking reliable, hands-on professionals who take pride in their work and are ready to grow with a respected local company.About the Role We’re currently hiring for a Handyman position in jersey city Nj with flexible opportunities for both full-time and part-time schedules. The specific Job is ( An estimate is needed at the property location where the reported damages occurred. Please provide the street sign, full property address, damage pictures, and measurement photos so the crew can visit the site and prepare an accurate estimate based on the actual conditions.) This role is perfect for someone who already has at least 3 months of hands-on experience in home repairs or general maintenance and is looking for steady work with a trustworthy company. Safe Nest is offering one of the best opportunities on the market. At Safe Nest, we believe in building more than just careers — we build futures. We’re hiring, and this could be your chance to join a team that’s making a real difference. Check out the role on Jazz HR, apply today, and let’s create something meaningful together If you’re driven, motivated, and ready to thrive, this role is for you. Applications are open now on Jazz HR — don’t miss out!Key Responsibilities • Perform a variety of home repair and maintenance tasks, such as:, • Light carpentry, • Drywall patching and painting, • Basic plumbing and electrical work, • General handyman duties like door adjustments, minor installations, and fixture replacements, • Maintain a clean and organized job site, • Communicate clearly and respectfully with customers and team members, • Ensure all work meets company quality and safety standards, • At least 3 months of experience in handyman services, general maintenance, or a construction-related trade, • Familiarity with basic hand and power tools, • Ability to work independently and efficiently, • Reliable transportation to and from job sites, • Good communication and customer service skills, • Physical ability to lift 40+ lbs and work on your feet for extended periods, • Must be at least 18 years old and legally eligible to work in the U.S., • Background check requiredWhat We Offer, • Flexible scheduling options (part-time and full-time), • Opportunities to grow and take on larger responsibilities, • On-the-job support and continued skill development, • A team-oriented and respectful work environment📍 Location: This position is based in jersey city Nj (Applicants must live locally or be able to commute to job sites within the area. Powered by JazzHR BBsmuaNO1B

Job DescriptionCompany Description ABOUT LGC STANDARDS: LGC Standards is a division of LGC Group, the UK’s designated National Measurement Institute for chemical and bioanalytical measurements. We are a leading global manufacturer and service provider of quality assurance and research tools, supporting analytical needs in more than 120 countries worldwide. We use our expertise to produce to the highest standards, including ranges produced under ISO/IEC 17025 and accredited to ISO 17034. Our wide range of reference materials and proficiency testing schemes is complemented by our experience in outsourcing and customs, enabling us to adapt quickly to provide tailored solutions that meet our customers’ analytical needs. We innovate and apply science in order to ensure the safety and integrity of products and services, in line with our vision of science for a safer world. Job Description The Account Manager will build strong relationships with key internal and external stakeholders and grow the Mid-Atlantic territory revenue of the Standards business with a primary focus in the Reference Materials and Analytical Standards product lines. What you’ll do • Own all assigned Commercial accounts and Strategic site-level locations (e.g., regional labs for multinationals), representing the entire LGC Standards portfolio across all end-markets (Pharma, Biotech, Environmental, etc.) to build new and maintain existing account relationships, • Identify and close new opportunities attained from either prospecting as self-generated leads or from marketing as marketing-qualified leads, • Involve additional LGC Standard’s team members and resources (e.g., end market sales managers, quoting specialists, etc.) on an as-needed basis to best service customer needs and to achieve the highest level of customer experience, • For relevant sites at specific strategic accounts, collaborate with the Sr. Director, Strategic & Commercial Accounts, to conduct planning and customer reviews, • Use LGC’s sales tools to manage prospects, existing accounts, new opportunities, the active pipeline and relevant sales forecasts in an accurate and timely manner, • Develop an in-depth understanding of key LGC products and their applications, • Meet and exceed assigned sales targets for LGC Standards., • Actively engage with customers (e.g., email, phone calls, in-person visits, etc.) to qualify leads, convert prospects, follow-up on quotations and drive new sales and accordingly maintain CRMs with up-to-date customer information, • B.S. in chemistry, physics, biochemistry, biology, or equivalent, • 5+ years’ experience in selling technical products used in research laboratories: Prior successful key account management experience dealing with central procurement is preferred, • Able to read and interpret documents such as RFQs, contracts, operating and maintenance instructions and procedure manuals, • Experience with customer relationship management platforms such as Sales Force and Desk. Expertise in Microsoft Office products is a plus, • Outstanding commercial awareness and planning abilities, • Proven track record of meeting and exceeding sales targets, • Fluency in English essential with additional languages an advantage, • Willing to travel up to 40% within the designated territory as required Additional Information What We Can Offer You: LGC recognizes benefits are key resources as you navigate your well-being journey. We’re pleased to offer comprehensive programs that are focused on supporting our employees and families’ well-being. Many of our benefit programs are effective the 1st of the month following hire date. • 401K matching for US Employees., • Paid Holidays, which include floating days and a holiday shutdown in December., • Comprehensive Benefits Package., • Professional development and extended growth opportunities across the CDN, TRC and LGC networks. LGC is a leading, global life science tools company, providing mission-critical components and solutions into high-growth application areas across the human healthcare and applied market segments. Its high-quality product portfolio is comprised of mission-critical tools for genomic analysis and for quality assurance applications, which are typically embedded and recurring within our customers’ products and workflows and are valued for their performance, quality, and range. OUR VALUES • PASSION, • CURIOSITY, • INTEGRITY, • BRILLIANCE LGC strongly believes that every job applicant and employee should be valued for their individual talents regardless of age, disability, race, color, ethnic or national origin, sex, sexual orientation, gender reassignment, marital or civil partnership, pregnancy or maternity, religion, or belief. Short listing, interviewing and selection will always be carried out without regard to gender, sexual orientation, marital status, color, race, nationality, ethnic or national origins, religion or belief, age, or trade union membership. For more information about LGC, please visit our website #scienceforasaferworld

Job Description Resource Innovations is seeking a Lead Engineer to join our growing team in New Jersey. We are seeking a highly skilled and motivated Lead Engineer with a strong background in multifamily and C&I custom and energy management DSM program engineering to join our dynamic team. As a Lead Engineer you will be responsible for providing customers the support and tools necessary to identify, quantify, and deliver cost-effective energy-efficiency projects. Resource Innovations (RI) is a women-led energy transformation firm focused on impact. Building on our expertise in energy efficiency, we're constantly expanding our portfolio of clean energy solutions to guide utilities through increasingly complex, connected challenges. Load flexibility. Electrification. Carbon reduction. With every step, we're leading the charge to power change. Duties and Responsibilities • Lead and support the implementation of multifamily and C&I custom and energy management (RCx, MBCx, etc.) energy efficiency projects., • Conduct energy audits and assessments at multifamily and commercial and industrial facilities to identify, measure, and verify energy efficiency improvements across systems such as HVAC, lighting, compressed air, refrigeration, process heating, and motors., • Serve as a technical liaison to utility clients, program administrators, contractors, and end customers to maximize program benefits and energy savings., • Identify barriers to energy efficiency adoption and propose innovative solutions to overcome them., • Maintain and enhance relationships with clients through professional, high-quality interactions and service delivery., • Manage project budgets and schedules, ensuring deliverables meet technical excellence and client requirements., • Develop energy efficiency project scopes and perform technical analysis, including energy modeling and economic simulations, to quantify savings and impacts using spreadsheets and energy modeling software., • Prepare high-quality technical reports summarizing findings, project economics (e.g., energy savings, cost savings, payback periods), and potential incentive opportunities., • Conduct measurement and verification (M&V) activities, including on-site visits to gather data, perform functional performance tests, and verify project installations., • Bachelor’s or master’s degree in mechanical engineering, energy engineering, or similar, • MUST RESIDE IN THE STATE OF NJ, • A strong understanding of mechanical and electrical systems and principals including: HVAC and refrigeration, thermal and fluid systems, motors, lighting and/or other commercial and industrial systems, • 5+ years of experience within the energy efficiency or building efficiency industry, • Ability to work independently and manage multiple projects while meeting deliverable deadlines and budgets, • Excellent writing, interpersonal, presentation, and analytical skills, • Ability to effectively distill and convey complex ideas into concise conversation/emails, • Comfortable managing projects and workflows with variable levels of ambiguity, • Demonstrated proficiency with Microsoft Office programs including Word and Excel, • Must be able to travel locally up to approximately 25% of the time, • P.E. and CEM certification, • Previous relevant experience with multifamily and C&I, • Previous relevant experience with success at managing multiple projects/programs, budgets, deliverables, and client relations., • Design and specification of HVAC, electrical, building automation/controls, • Building and energy modeling/simulation tools (e.g. DOE-2, eQuest, EnergyPlus, Trane Trace, ECAM), • Familiar with energy savings opportunities for building energy using systems (lighting, HVAC, compressed air, refrigeration, process heating and cooling, etc.)., • Commissioning and/or retro-commissioning test procedures, schematic diagrams, and system specifications, • Familiarity with relevant energy efficiency codes and standards (e.g., IECC, Code of Federal Regulations, ASHRAE 90.1, etc). About Resource Innovations Resource Innovations (RI) is a women-led energy transformation firm focused on impact. Building on our expertise in energy efficiency, we’re constantly expanding our portfolio of clean energy solutions to guide utilities through increasingly complex, connected challenges. Load flexibility. Electrification. Carbon reduction. With every step, we’re leading the charge to power change. Resource Innovations is an Equal Opportunity Employer, committed to ensuring equal employment opportunities for all job applicants and employees without regard to race, color, religion, national origin, gender, age, disability, marital status, genetics, protected veteran status, sexual orientation, or any other protected status. In addition to federal law requirements, Resource Innovations complies with applicable state and local laws governing non-discrimination in employment in every location in which the company does work. Compensation & Benefits Resource Innovations offers competitive salaries based on a candidate's skills, experience and qualifications for the position. The compensation range for the base salary for this position is $90,000 - $130,000. In addition to base pay, employees are eligible for a discretionary annual bonus. The stated salary represents the expected compensation for this position. Final compensation will be determined based on factors such as the candidate's experience, education and location. We also offer a comprehensive benefits package that includes three weeks of paid vacation per year; paid holidays; a 401(k)-retirement plan with employer matching; health, dental and vision insurance; and other supplemental benefits. Employment with Resource Innovations is contingent upon the successful completion of a comprehensive background check and reference check. If applicable to the position, a pre-employment drug screen may also be required. The above job description and job requirements are not intended to be all inclusive. Resource Innovations retains the right to make changes or adjustments to job descriptions and/or job requirements at any time without notice.

Job DescriptionAbout Lyra Lyra Health is the leading provider of mental health solutions for employers supporting more than 20 million people globally. The company has published more than 20 peer-reviewed studies, and delivered unmatched outcomes in terms of access, clinical effectiveness and cost efficiency. Extensive peer-reviewed research confirms Lyra’s transformative care model helps people recover twice as fast and results in a 26% annual reduction in overall healthcare claims costs. Lyra is transforming access to life-changing mental health care through Lyra Empower, the only fully integrated, AI-powered platform combining the highest-quality care and technology solutions. About the Opportunity Lyra’s provider network is composed of in-person and virtual therapists, physicians, and coaches across the US. With our advanced matching technology, supportive provider platform, and opportunities for training and clinical consultation, being part of our network is an incredible chance to do what you love (like client care) with support for the things you don’t love (like self promotion and scheduling). This opportunity is a great fit if you’re an independently licensed clinical therapist interested in providing culturally responsive, evidence-based therapy for children, adults, couples, and/or families. We encourage clinicians to apply who have experience with caseloads that include a comprehensive spectrum of mental health needs, from milder presentations to more complex and severe support. This opportunity is a great fit for providers seeking well-matched and motivated clients, administrative and marketing support, and easy invoicing with quick payments. The ability to work with clients in person through your private or group practice is strongly preferred. We are looking for clinicians who are able to work with clients in these locations: Jersey City and WilliamstownRequirements: • Master’s or doctoral degree from a clinical track (e.g., MSW, MFT, MC, MMHC, PhD, PsyD), • Unrestricted LCSW, LMFT, LPC, PsyD, PhD, or equivalent license (i.e., able to work independently, without supervision from a licensed supervisor) without current, past, or pending disciplinary action, • Experience and commitment to providing evidence-based treatments (e.g., ACT, CBT, CPT, DBT) and clinical best practices (e.g., measurement based care, promoting skills practice), • Ability to provide care to children, adults, couples, and/or families with a strong preference for in-person care delivery, • Must have office space with ability to see clients in Arkansas area, • Experience managing risk and responding to clinical crises, as needed, • Full-time resident of the United StatesHere are some of the advantages to joining the Lyra provider network:, • Connect with highly compatible clients thanks to Lyra’s powerful matching algorithm technology, • Set your own schedule, without a minimum hours requirement, • Let Lyra clients easily book appointments with the Lyra Calendar feature, which seamlessly integrates with your calendar, • Focus less on the administrative burden of billing with Lyra’s paperless billing and quick payment turnaround, • Access Lyra’s experienced clinical consultations team to get rapid support with your Lyra clients as well as access a range of specialty group consultation meetings, • Have peace of mind with Lyra’s 24/7 Care Navigation team for crisis support, • Upskill your knowledgebase with access to Lyra’s large collection of free and relevant CE credited courses approved by APA, ASWB, and NBCC, • Stay in the know with monthly newsletters and robust Help Center resources just for Lyra providers

Job Description Tiger Analytics is an advanced analytics consulting firm. We are the trusted analytics partner for several Fortune 100 companies, enabling them to generate business value from data. Our consultants bring deep expertise in Data Science, Machine Learning, and AI. Our business value and leadership have been recognized by various market research firms, including Forrester and Gartner. We are looking for someone with a good blend of business consulting skills and a data analytics background. If you are passionate to work on unstructured business problems that can be solved using data, we would like to talk to you. RESPONSIBILITIES: • Work on the latest applications of data science to solve business problems in Pharma and Lifescience domain, • Work directly with client stakeholders to translate business problems into high-level analytics solution designs, • Knowledge of advanced analytics approaches and methodologies and best practices of leveraging data to drive informative decisions, • Proficiency in using advanced analytics to drive business value including ROI/value assessment, digital KPI tracking, campaign measurement, etc, • Experience in generating insights from reports and summarizing for brand teams, • You will be responsible for account management, client relationships, and account growth, • You will be responsible for scaling pilots / POCs to a long-term transformative program and delivering continuous business value, • Fluency with pharma data sources such as Veeva and IQVIA (Plantrak, LAAD, PE, etc) including RWD sources such as TriNetX, Flatiron, Optum, Komodo etc., • Experience working with all levels of management and consulting with key business stakeholders., • Present analytic solutions to business audiences highlighting robustness of the solution and how it could help generate business value, • Responsible for making presentations to senior management, communicating results to business teams, and develop plans to help operationalize analytics solution, • 10-16 years of professional work experience with at least 9 years in data analytics, • Deep understanding of pharma dataset, KPIs, and insight needs across different HQ and field personas across commercial, PSS, and market access, • Ability to engage with executive/VP level stakeholders from client’s team to translate business problems to high level analytics solution approach, • Strong knowledge of Life Science and Pharma domain, • Experience in specialty drug and rare diseases, • Strong project management and team management skills and ability to work with global teams, • Strong SQL skills and hands-on experience with analytic tools like R & Python & visualization tools like Power BI or Tableau, • Strong understanding of standard data sources—especially pharmacy, HUB, CRM, IQVIA, alignments, and related datasets—along with the nuances and quality controls required to ensure accuracy, • Experience in developing hypotheses and validating them through data analysis to identify and investigate trends, • Experience in building and maintaining reports, with a focus on optimizing effort through automation, • Experience in managing large accounts and active involvement in account growth. P&L ownership in the past would be an added advantage Significant career development opportunities exist as the company grows. The position offers a unique opportunity to be part of a small, fast-growing, challenging and entrepreneurial environment, with a high degree of individual responsibility. Tiger Analytics provides equal employment opportunities to applicants and employees without regard to race, color, religion, age, sex, sexual orientation, gender identity/expression, pregnancy, national origin, ancestry, marital status, protected veteran status, disability status, or any other basis as protected by federal, state, or local law.

Job Description NS Pharma is a highly focused, research-driven biopharmaceutical company working in rare diseases. We're exploring the potential of cutting-edge science as a subsidiary of Nippon Shinyaku Co., Ltd. Japan. Job Summary: Responsible for the management and execution of various aspects of translational and early-stage clinical studies (implementation, site selection, patient recruitment, vendor selection and oversight, tracking clinical data, etc.) for global clinical studies with adherence to all relevant regulations including FDA, ICH and Regulatory requirements. This is a hybrid position that requires to be in the Paramus office twice a week. Essential Duties and Responsibilities: • Develop and deliver program level translational and early-stage clinical drug development strategy, • Design, plan and execute biomarker strategies to inform indication priorities, commercial differentiation, regulatory strategies, biomarker qualification plan, and that achieve biomarker-driven milestones, such as target engagement, measurement assay development and validation, pharmacodynamic activity, and other biomarker contexts of use in clinical-stage programs, • Integrate with colleagues in discovery research and research-stage project teams to identify translational biomarkers and demonstrate preclinical target engagement, methodology of detection and measurement, proof-of-mechanism, pharmacodynamic activity, PK/PD relationships., • Plan, implement, manage and report for regional or global clinical studies., • Manage and Lead selection process of CROs for regional or global clinical studies., • Direct, oversight and manage the performance of study vendors (e.g. CROs and central labs)., • Provide direction and guidance with the Clinical Lead to achieve project objectives., • Manage and resolve project performance issues (issue management) if they arise., • Manage activities for clinical site selection, investigator meetings and study initiation., • Oversight of patient recruitment and development of recruitment strategies and plans., • Responsible for the creation of study related documentation (protocol, ICF, CRF, operations manuals etc.)., • Tracking clinical data, regulatory documents, and patient enrollment information and data resolutions to assure the timely completion of clinical studies in line with approved clinical development plans., • Assure compliance of investigational sites with SOPs, FDA regulations and ICH guidelines to assure that the studies are carried out fulfilling the requirements of the study protocols., • Manage negotiation of clinical trial contracts between investigational sites and CROs., • Oversight of data management vendors and statistical analysis vendors to ensure timely analysis output delivery in accordance with Statistical Analysis Plan., • Responsible for coordination with clinical suppliers to ensure appropriate and timely delivery of clinical trial supplies to clinical sites., • Implement project specific training program and training materials, • Create and maintain clinical SOPs and TMF as part of global QMS and TMF processes., • Must be able to work effectively in a multi-cultural, global team environment as responsibilities include intensive drug development collaboration with global project teams, NS Pharma Japan (HQ), external partners and vendors., • Experience in negotiating Master Service Agreements, Project Specific Contracts and Budgets., • Good cross-functional team leader who fosters team spirit and team motivation (teamwork), • Thorough understanding of clinical operations involved as related to the planning, launching, and closing clinical studies., • Ability to anticipate and timely escalate issues and to define appropriate action plans, • Decision-making and problem-solving skills, • Ability to handle multiple tasks and prioritize, • Strong organizational, communication and presentation skills, • PhD and/or MD with 8+ years of experience in pharmaceutical or biotech R&D. MS or BS with 12+ years of R&D experience with progressive levels of team leadership also considered., • Preference for those with 5+ years’ experience as a Translational lead for clinical programs. Experience with Ph2/3 or registrational programs desired., • Excellent understanding of drug development, regulatory processes and clinical development NS Pharma employees embrace our Mission to Help People Lead Healthier Happier Lives. We pride ourselves in offering employees and their families a robust Compensation and Benefits package designed to meet their needs, on and off the job. The annualized target salary range for this role is $175,000 to $220, 000; actual salaries will vary and may be above or below this range depending on several factors, including experience, education, training, location, and merit. Other benefits include: • Medical, Dental & Vision Insurance, Basic and Voluntary Life and AD&D Insurance, Short- and Long-Term Disability Insurance, Flexible Spending Account, Health Savings Account, and Employee Assistance Programs, • Discretionary Bonus Programs and Long-term Incentive Plan, • Retirement Savings 401k with company match, • Generous Paid Time Off, Sick Time & Paid Holidays including a paid Year-End Shutdown., • Career Development, Progression and Training NS Pharma is an EEO employer.

Job DescriptionThis is a temporary 6-month contracted 1099 position with no benefits. Job Functions: • Applies expertise as an emerging authority in the mechanical engineering discipline., • Conceives and develops solutions to difficult analytical and pneumatic/mechanical/electrical design problems., • Participates in establishing system or component design objectives and writes portions of complex specifications and engineering reports., • Reviews and helps to develop product specifications, • Conducts conceptual design studies using MCAD and other applicable design tools. Collaborates with other engineering functions, • Develops prototype hardware using internal manufacturing resources and outside vendors, • Tests product to verify that designs meet specification requirements such as environmental, regulatory and safety requirements, • Generates documentation supporting the design, • Design for Manufacturability and Assembly, DFM&A (cost/tooling/process considerations), preferably using SolidWorks CAD software., • Understanding in design and development of injection molded plastic, plastic extrusion, casting, sheet metal, metal stampings, additive manufacturing processes, and machined metal components, and assemblies with high part counts highly desirable., • Knowledge of mechanical design and development using metric ANSI/ISO dimensioning and drafting standards highly desirable., • Understanding of GD&T, mechanical measurement and testing equip., and statistical analysis of test data., • Experience with electronic document control systems in medical device and/or medical equipment design and development., • Highly skilled at analytical reasoning, mechanism design, creative problem solving, and mathematical analysis., • Ability to create and meet scheduled timelines (manage and coordinate tasks as required)., • Ability to work in a team environment., • Strong communication skills., • Familiarity with dimensioning and tolerance, thermal and structural analysis, and vibration testing/analysis, • Intermediate knowledge of FDA, IEC and UL standards relating to medical electronic equipment, • Strong technical and analytical ability, verbal and written communication skills, ingenuity and creativity, interpersonal and project management skills, • Ability to operate test equipment such as various pressure and flow measurement equipment, temperature/humidity chambers, PC-based data recorders, simulators, DVM’s and oscilloscopes, • BSME or MSME and a minimum of 10 years of related experience in design/product development of electro pneumatic assemblies including technical supervision of sub-projects, • Formal training in basic and advanced topics in Solid Works is strongly preferred, • Proficiency with Microsoft Windows, MS Office applications, and Adobe Acrobat, • Advanced proficiency with SolidWorks, MCAD/CAE software and database management software preferred, • Advanced proficiency with Microsoft Visio and Microsoft Project preferred Important Notice: Protecting Your Information Medvacon Talent Acquisition only conducts initial video interviews via Microsoft Teams or Zoom. All communication will come from an email address ending in @medvacon.com. If you receive a message that seems suspicious or is not from our official domain, please report it immediately to . Powered by JazzHR brNqS9xPBq

Job Description Position Summary: We are seeking a motivated and detail-oriented Assembler to join our factory floor team. The ideal candidate will have a background in manufacturing, a basic understanding of CNC operations, and proficiency in using power tools and measuring equipment. As an integral part of our production process, the Assembler will be responsible for assembling equipment with precision and contributing to the overall efficiency and quality of our manufacturing operations. Key Responsibilities: * Assemble metal and mechanical components according to diagrams and work instructions. * Use power tools, hand tools, and measuring devices (such as measuring tape, calipers, etc.) to complete assembly tasks. * Follow standard operating procedures (SOPs) and adhere to safety protocols. * Inspect completed assemblies for quality and accuracy. * Collaborate with team members and supervisors to meet production schedules and targets. * Maintain a clean and organized work area. * Assist with basic CNC machine tasks as needed (training can be provided). * Report any equipment malfunctions or quality issues to supervisors promptly. * Participate in documenting and improving standard operating procedures (SOPs) to support process consistency and efficiency. Qualifications: * Prior experience in a manufacturing or assembly environment preferred. * Basic knowledge of CNC machinery is a plus but not required. * Proficient in the use of power tools and hand tools. * Ability to accurately read and use a measuring tape and other measurement tools. * Strong attention to detail and commitment to producing high-quality work. * Punctual, reliable, and a team player. * Ability to stand for extended periods and lift up to [weight limit, e.g., 50 lbs]. What We Offer: * Competitive hourly wage. * Training and growth opportunities in manufacturing and CNC operations. * Supportive team environment. * Growing PTO plan * You more you learn, the more you earn * 401K plan Company DescriptionHickory Industries, Inc. (Old Hickory Bar-B-Q) is one of the world’s most established manufacturers of commercial rotisseries, churrasco grills, and display warmers for the foodservice and retail sectors. With over 50 models available in both gas and electric options, Hickory equipment serves everyone from neighborhood eateries to national supermarket chains. Founded in 1946, Hickory has built a reputation for quality, innovation, and durability in every product we make. Operating from our 46,000-square-foot facility in North Bergen, New Jersey, we continue to uphold our legacy of American craftsmanship — delivering dependable, high-performance equipment that helps customers cook better, sell more, and serve with confidence.Hickory Industries, Inc. (Old Hickory Bar-B-Q) is one of the world’s most established manufacturers of commercial rotisseries, churrasco grills, and display warmers for the foodservice and retail sectors. With over 50 models available in both gas and electric options, Hickory equipment serves everyone from neighborhood eateries to national supermarket chains.\r\n\r\nFounded in 1946, Hickory has built a reputation for quality, innovation, and durability in every product we make. Operating from our 46,000-square-foot facility in North Bergen, New Jersey, we continue to uphold our legacy of American craftsmanship — delivering dependable, high-performance equipment that helps customers cook better, sell more, and serve with confidence.

Job DescriptionFor more than 58 years, Triangle Sport line winders have been recognized as the world's premier spooling stations. Originating from a collaboration with Abu Garcia in 1962, Triangle Sport has set the industry standard with hand-built, lifetime-engineered line winders. Essential for tackle shops, serious anglers, and professionals, our line winders ensure perfectly spooled lines for fly fishing, freshwater fishing, offshore fishing, and everything in between. Summary We are seeking a skilled and detail-oriented Line Winder Assembly Technician to join our team. This role involves performing a variety of complex assembly operations on small to medium-sized electro-mechanical assemblies (or sub-assemblies) with strict tolerance requirements. The technician will ensure the production of high-quality products that meet customer specifications and provide comprehensive support activities, including customer assistance. Hours - 7:00 AM to 3:30 PM Essential Duties and Responsibilities: * Assembly and Inspection: • Operate manual and power tools to position, align, and fit parts precisely according to knowledge or blueprints., • Utilize basic and advanced measurement tools to test, evaluate, and troubleshoot line winder assemblies during first piece, in-process, and final inspections., • Perform all necessary customer repairs. Material Management: • Conduct basic data entry to update the status of job orders., • Understand customer requirements to create production orders, issue materials, schedule daily activities, and handle receiving., • Prepare packaging and complete all related documentation for shipping completed assemblies and repairs, including international shipments., • Place orders with suppliers through established blanket orders., • Docu:30 PMment and inspect incoming shipments from suppliers., • Assist with inventory maintenance. Customer Support: • Provide telephone support for all line winder products, including processing customer orders and diagnosing repair issues., • Help maintain customer discrepancy logs., • Train other associates one-on-one., • Complete all required documentation and report labor accurately and promptly., • Strong attention to detail and precision in assembly tasks., • Ability to read and interpret blueprints and technical drawings., • Proficiency with manual and power tools, as well as measurement instruments., • Good communication skills for customer support and training purposes., • Basic data entry and material management skills. Triangle is proud to be an equal-opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Powered by JazzHR fwHDkR3sFt

Job DescriptionCompany Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description STS Aerospace is looking for a Manufacturing Engineer that is accountable for improving and maintaining first pass yield for specified parts and/or processes. This is accomplished by driving continuous improvement initiatives, process development/modification, documentation of standards/best practices, and equipment onboarding/troubleshooting. Candidate shall also support cross functional initiatives with Production, Quality and Purchasing departments to meet company goals and product quality standards. Scope of Responsibilities: • Troubleshooting of quality issues throughout the production process: welding, brazing, nickel plating, cleaning, and borescope inspection. Additional processes: bending., • Use continuous improvement and lean techniques to increase production efficiency, eliminate waste, and drive cost savings opportunities., • Support production staff with specification/technical knowledge, inspection techniques, weld/braze consumables management and day-to-day trouble shooting efforts., • Documentation and standardization of processes via work instructions and operating instructions to increase efficiency, facilitate cross-training and enable proper equipment usage., • Equipment and tooling on-boarding into production process to support new product, process efficiency, ergonomics or safety. Basic troubleshooting, light-level repair and/or export of orbital weld machines, orbital weld heads, steam cleaning machines, tungsten grinders etc., • Effective communication with production employees, management staff and cross-functional team to ensure the alignment of efforts to meet company goals., • Conduct classes and trainings to support continuous improvements efforts and product quality i.e. Visual Inspection and Back-to-Basics courses., • Manage operator qualifications to ensure production staff is qualified to perform given tasks, • Ability to work in a fast-paced, deadline-oriented team environment, • Ability to read, interpret, translate engineering drawings and customer specifications to drive compliance, • Excellent team player with a great attitude. Accountabilities • Support of Team Goals, Represent company as process expert, requisition tooling and equipment for processes., • Performance Measurement & Performance Evaluation., • Meet team quarterly objectives. Adherence to goals and behaviors associate with achieving them, • First pass yield, • Process compliance (welding, bending, brazing, chemical), • Project completion/execution, • Aging (units over lead-time)Qualifications, • Proven working experience as a manufacturing engineer or in a related field., • Experience in blueprint reading and spec interpretation., • Must be comfortable in a manufacturing environment often fast-paced and loud., • Must be able to stand, lift, walk, bend, and reach during their shift., • Must be comfortable wearing safety glasses., • Work well within a team., • Creative and innovative thinking skills., • Problem-solving skills. Additional Information Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job DescriptionOur client is expanding their operations in Passaic County and seeking an experienced Printing Press Supervisor to lead the 2nd shift team. If you have hands-on offset lithography expertise and strong leadership skills, this could be your next opportunity. Responsibilities: • Lead and manage pressroom operations, personnel, and equipment for second shift, • Drive efficiency by reducing setup times, controlling costs, and minimizing downtime, • Maintain pressroom quality standards and monitor workflow, • Oversee production targets, waste-control goals, and inventory for supplies, • Collaborate with customers on press approvals and assist crews with technical challenges, • Ensure compliance with FSSC 22000 certification requirements and promote safety, • Support scheduling, coverage, hiring, and training for team members, • Align print specifications with Graphics Department to maintain G7 standards, • Oversee Sheeting Department operations to meet production goalsQualifications:, • 5+ years operating KBA (Koenig-Bauer), Heidelberg, or Manroland presses (preferably Large Format 7-Color), • 3+ years in a supervisory role with strong leadership and communication skills, • Experience with spectrophotometry, lab color measurement, and FSSC 22000 / ISO 9001 standards, • Bilingual (English/Spanish) preferredBenefit offerings include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, and 401K plan. Our program provides employees the flexibility to choose the type of coverage that meets their individual needs. Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State, or local law; and Holiday pay upon meeting eligibility criteria. If you're ready to lead a dynamic team and deliver top-quality production, we'd love to connect. Apply today and join a company committed to excellence in packaging solutions. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Pay Details: $95,000.00 to $120,000.00 per year Search managed by: Mary Hutchins Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionPrimary Job Title: Analytics & Insights AnalystAlternate/Related Job Titles: • Digital Analytics Specialist, • Business Intelligence Analyst, • Customer Insights Analyst, • Position Type: Contract, • Contract Duration: 9 months, • Start: As Soon As Possible, • Pay Rate: $68.94 – $93.27 per hourJob SummaryWe are seeking a highly analytical and data-driven Analytics & Insights Analyst to join the Global Customer Service (CS) organization. This role focuses on driving operational efficiency, digital optimization, and customer experience improvements through analytics, reporting, and actionable insights. The ideal candidate thrives at the intersection of data, business strategy, and technology, leveraging analytics to shape the digital experience across CS Operations and customer-facing platforms such as the Help Center and Contact Us sites.Key Responsibilities, • Data Analysis: Gather, manipulate, and analyze complex datasets to uncover actionable insights that support customer service strategy and digital optimization., • Visualization & Reporting: Build intuitive dashboards, reports, and presentations using tools like Tableau and AWS QuickSight to communicate data-driven findings., • Project Support: Partner with cross-functional teams to support initiatives through ideation, measurement definition, reporting, and impact analysis., • A/B Testing: Assist in test setup, execution, and post-analysis to measure optimization success (Adobe Target preferred)., • Digital Subject Matter Expert: Provide expertise in digital analytics and customer behavior profiling across web platforms., • Data Integration: Connect digital analytics data to enterprise reporting tools, ensuring data quality, governance, and standardization., • Collaborate with Customer Service leadership and product teams to measure total business impact of digital initiatives.Required Experience, • Bachelor’s degree in Engineering, Business Analytics, Information Systems, Statistics, or related quantitative discipline., • 5+ years of experience in data analytics, including 1+ year in digital analytics., • Advanced proficiency in SQL, Python, and Excel for data analysis and automation., • Strong experience with Adobe Analytics and A/B testing platforms (Adobe Target preferred)., • Hands-on experience developing data visualizations and dashboards using Tableau or AWS QuickSight., • Solid understanding of ETL processes, data warehousing, and schema design., • Knowledge of statistical concepts such as hypothesis testing, confidence intervals, and regression analysis., • Excellent communication skills, with the ability to translate technical findings into clear business insights.Preferred Experience, • Experience in customer experience analytics or Customer Service (Help Center, Contact Us) environments., • Familiarity with the AWS technology stack (Redshift SQL, S3, DynamoDB)., • Knowledge of front-end web technologies (HTML5, JavaScript, CSS3, Git)., • Experience implementing personalization or testing solutions like Optimizely., • Mentorship experience guiding junior analysts.Required Skills, • Digital Analytics & Web Optimization, • SQL / Python / Tableau / QuickSight, • Adobe Analytics & A/B Testing, • Statistical Analysis & Data StorytellingPreferred Skills, • AWS Data Stack (Redshift, S3, DynamoDB), • Customer Journey Analytics, • Data Governance & Quality Management, • Cross-Functional CollaborationAdditional Skills, • Business Insight & Problem Solving, • Data Visualization & Reporting Automation, • Digital Performance OptimizationBenefits, • Medical, Vision, and Dental Insurance Plans, • 401k Retirement FundAbout the ClientLeading audiobook producer revolutionizing the industry with innovative technology and superior programming. Our passion for well-composed, artfully performed audiobooks has earned millions of loyal subscribers worldwide. Our People Principles guide our team of pioneers and inventors to deliver exceptional customer experiences and drive positive change.About GTTGTT is a minority-owned staffing firm and a subsidiary of Chenega Corporation, a Native American-owned company in Alaska. As an economically disadvantaged corporation, we highly value diverse and inclusive workplaces. Our clients include Fortune 500 companies across banking, insurance, financial services, life sciences, biotech, utility, and retail sectors throughout the U.S. and Canada. We look forward to helping you land your next great career opportunity!Job Number: 25-27499 #LI-GTT #LI-Onsite #gttjobsCompany DescriptionGlobal Technical Talent is a subsidiary of Chenega Corporation () with over 1.3 billion US$ in revenue and 5800 US employees. We provide Total Talent Solutions, Global staffing, SOW, RPO, Direct Sourcing, and Global Payroll with physical offices in US, Canada, and India. GTT Digital headquartered in Toronto specializes in providing high-tech digital and banking talent to some of the nation’s largest financial institutions. As a leader in the staffing industry for over 22 years, we have become one of the largest staffing firms in the New England region, working with Fortune 500 clients and cutting-edge, technology-driven recruiting infrastructure. We are a Native American-owned, economically disadvantaged corporation that highly values diverse and inclusive workplaces. Our clients and partners are among the most successful and innovative organizations in the world. Our top clients are Fortune 500 banking, insurance, and financial services firms, some of the nation’s largest life sciences, biotech, utility, and retail companies, and prestigious educational institutions in the Ivy League tier. There is always a new opportunity for success when you look through all of the open job opportunities on our website’s career page. Just click on this link: Awards SIA’s Fastest Growing Staffing Firm: 2023 and 2015 SIA’s Best Staffing Firm to Work for: 2019 -2023 Inc 5000 Fastest Growing Private Company: 2023, 2022, 2016, 2015 Randstad Preferred Supplier: 2020 - 2023 TechServe Alliance Excellence Award. 2019 NH Business Magazines Fast 5 fastest growing companies Ernst & Young Entrepreneur of the Year Finalist: 2015Global Technical Talent is a subsidiary of Chenega Corporation () with over 1.3 billion US$ in revenue and 5800 US employees. We provide Total Talent Solutions, Global staffing, SOW, RPO, Direct Sourcing, and Global Payroll with physical offices in US, Canada, and India. GTT Digital headquartered in Toronto specializes in providing high-tech digital and banking talent to some of the nation’s largest financial institutions. As a leader in the staffing industry for over 22 years, we have become one of the largest staffing firms in the New England region, working with Fortune 500 clients and cutting-edge, technology-driven recruiting infrastructure.\r\n\r\nWe are a Native American-owned, economically disadvantaged corporation that highly values diverse and inclusive workplaces. Our clients and partners are among the most successful and innovative organizations in the world. Our top clients are Fortune 500 banking, insurance, and financial services firms, some of the nation’s largest life sciences, biotech, utility, and retail companies, and prestigious educational institutions in the Ivy League tier.\r\n \r\nThere is always a new opportunity for success when you look through all of the open job opportunities on our website’s career page. Just click on this link: \r\n \r\nAwards\r\n\r\nSIA’s Fastest Growing Staffing Firm: 2023 and 2015\r\nSIA’s Best Staffing Firm to Work for: 2019 -2023\r\nInc 5000 Fastest Growing Private Company: 2023, 2022, 2016, 2015\r\nRandstad Preferred Supplier: 2020 - 2023\r\nTechServe Alliance Excellence Award. 2019\r\nNH Business Magazines Fast 5 fastest growing companies\r\nErnst & Young Entrepreneur of the Year Finalist: 2015

Job DescriptionBenefits: • Competitive salary, • Health insurance As the Project Manager on kitchen remodeling projects, you will plan and supervise projects from start to finish. The Project Manager coordinates all aspects of the project from purchasing materials, overseeing the installation timelines, and ensuring the project is completed on time and efficiently to create an exceptional and enjoyable experience for our clients. Role Summary The Assistant Project Manager supports all job logisticsscheduling, material readiness, communication, progress tracking, and site follow-up. Youll ensure timelines stay on track, information is accurate, and customers and installers are aligned. Key Responsibilities Scheduling & Coordination: • Support management of master job schedules, • Coordinate installers, deliveries, trades, and templating dates, • Confirm timing with homeowners in advance, • Update project status in JobTread/GHLProject Support, • Prepare job folders, installation binders, and measurement sheets, • Track milestones, change orders, and punch list items, • Assist in pre-construction walkthroughs and documentation, • Support site visits and completion sign-offsCustomer Communication, • Communicate proactively with homeowners, • Provide schedule confirmations and progress updates, • Help address minor customer concerns with professionalismMaterials & Vendors, • Track orders, delivery dates, and readiness, • Coordinate countertop templates and installs, • Ensure correct materials are onsite before work beginsReporting & Internal Support, • Maintain dashboards for job progress, • Support weekly operational touchpoints with Project Manager, • Capture job photos, documentation, and survey scoresWhat Success Looks Like, • No surprises in the schedule, • Projects begin with full material readiness, • Installers show up prepared, • Customers receive timely and clear communication, • Punch items close quickly, • Project Manager has full visibility at all times Qualifications Required • Strong organizational and coordination skills, • Ability to manage many moving parts, • Clear communication, • Detail orientation Preferred • Experience in home improvement, construction, or remodeling, • Understanding of trades scheduling, • Familiarity with job management systems, • Basic comfort reading plans or layouts Benefits/Perks • Paid Training, • Competitive Compensation, • Bonus Opportunities (performance-based), • Steady, year-round work volume, • Growth Opportunities if desiredTraining is structured so you understand products, scheduling systems, processes, and customer guidelines before taking full responsibility. Do you take pride in your work and want to be part of a growing local company that values your skills? This is a permanent, year-round position with paid training and bonus potential. Why join the Kitchen Tune-Up team? We offer substantial training and lucrative compensation for those willing to work inside of a process, keep a sharp eye for detail, remodel the expectations of our clients, and work hard.

Job Description CNC Programmer - Climate controlled environment Our client is seeking an experienced CNC programmer to create CNC programs for a variety of production and prototype parts. The ideal person should know CNC machining processes, fixturing, CNC cutting tools, and Gibbs Cam software (Solidworks /Mastercam). Essential Duties and Responsibilities: • Operate CNC lathe or mill, • Create and edit CNC programs and setup sheets for processing parts on vertical and horizontal CNC machining centers., • Design project fixturing and plan cutting tool sequence to process parts efficiently, • Support setup and operator machinist to produce quality parts., • Provide feedback to design engineers to produce manufacturable designs and drawings., • Research new technology in CNC cutting tools, machining fixtures, and effective operation sequences to reduce part costs and cycle times., • Experience in mill CNC machine tool programming and setup, • Understanding of G code editing and troubleshooting. Creating and editing macros is a plus, • Strong technical knowledge of current CNC machining cutting tools and calculating feeds and speeds, • Ability to interpret engineering drawings with geometric dimensioning and tolerancing (GD&T), • Experience with the machining of castings, • Experience using Gibbs Cam, • Programming experience using a coordinate measurement Machine (CMM) is a plus, • Good verbal and written communication skills in English., • Competent using Microsoft Office (Outlook, Excel, Word,) Company DescriptionNJMEP is a private, not-for-profit organization that improves the profitability and competitiveness of New Jersey’s manufacturers.NJMEP is a private, not-for-profit organization that improves the profitability and competitiveness of New Jersey’s manufacturers.

Job DescriptionBPM-PR Firm is a premier public relations agency committed to delivering innovative and impactful communication strategies for a diverse clientele. With a focus on creativity, a multi layered media approach, strategic thinking, and client satisfaction, we excel in building, enhancing, and safeguarding our clients' reputations in today's dynamic media landscape. We are currently seeking a talented and experienced Senior Publicist to join our team. Position Summary: As a Senior Publicist at BPM-PR Firm, you will play a pivotal role in shaping and executing strategic PR campaigns for our clients. Reporting to the Department Director, you will be responsible for securing media coverage, building relationships with journalists and influencers, partnerships, and driving brand awareness for our clients across various industries. The ideal candidate will have a strong track record of securing high-profile media placements, excellent communication skills, and a deep understanding of media relations and storytelling. Day-to-day activities will include: • Develop and execute strategic PR campaigns to meet client objectives and goals., • Liaise on a daily basis with clients, in-house publicists, and the media., • Outreach to build new relationships and network within the media., • Monitor the media, including newspapers, magazines, journals, broadcasts, newswires, television, and blogs, for opportunities for clients., • Monitor the media for closed media placements., • Use system databases and systems to pull researched media lists and continuous online research for new build new media relationships., • Work as part of a department account team to develop client proposals and implement PR activity strategies., • Create monthly PR plans and strategies to guide campaign execution and ensure alignment with client goals., • Create timely media angles and pitches for responsive news, leveraging current events and trends to secure media coverage., • Manage and track media samples, ensuring accurate inventory, timely distribution, and effective follow-up on all samples., • Communicate daily with the team to coordinate efforts, share updates, and effectively manage client workloads., • Prepare regular client reports and attend client meetings., • Create press releases and pitch letters, crafting compelling narratives to attract media attention and secure coverage for clients., • Assist in researching, writing, and distributing press releases to targeted media., • Promote news stories and features to the media., • Collate, analyze, and evaluate incoming media coverage., • Ensure all media coverage is correct and communicate media placements ongoing to clients, • Assist in event creation, including press conferences and on-site events for fashion, beauty, entertainment, and general promotions., • Attend and promote client events to media and networks., • Coordinate and manage client sample mailings., • Undertake research for client strategy, press releases, media strategies and present to potential new clients., • Manage the PR & Client aspect of possible crisis situations., • Manage department interns., • Prepare regular client reports and attend client meetings.Requirements:, • Bachelor's degree in Public Relations, Communications, Journalism, or related field., • Minimum of 5 years of experience in public relations or journalism, with a focus on media relations., • Proven track record of securing high-profile media placements., • Excellent written and verbal communication skills., • Strong media relationships and contacts across various industries., • Ability to work independently and manage multiple projects simultaneously., • Creative thinker with a passion for storytelling and brand building., • Proficiency in media monitoring and measurement tools., • Experience with crisis communication and issues management is a plus., • Firm experience is required.What We Offer:, • Contract Position, • Opportunities for professional development and growth., • Collaborative and supportive work environment., • Work with a diverse range of clients and industries.BPM-PR Firm is an equal opportunity employer and values diversity in the workplace. We do not discriminate on the basis of race, color, religion, gender, sexual orientation, age, marital status, veteran status, or disability status. All qualified applicants will receive consideration for employment. BPM-PR Firm is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. No calls Please. Flexible work from home options available.

Job Description Laser / Punch Combo Operator Kearny, NJ 2nd Shift 330pm-Midnight ,Mon-Fri $25 to $28 an hour+overtime+benefits Laser / Punch Operator--Experience with AMADA or TRUMPF preferred Call 843-619-2299 or email for detail Responsibilities: • The machine operator is responsible for all functions related to the daily production output. This position will require the use of computers, CAD programs, basic hand tools, and measurement instruments., • Program, setup and operate a Laser / Punch Machine preferably AMADA or TRUMPF, • Experience in sheet metal fabrication, • Understanding of limitations and capabilities of punch press machines regarding tooling capabilities, such as clearance dies, countersinks, taps, etc., • Experience in NC coding with capability to edit to job requirements, • Communicate with production leads on meeting demands and following schedules, • Inspect production parts for defects and meets quality standards, • Perform routine maintenance on machinery, • Maintain work area and ensure a clean, safe work environment, • Work with Quality, Environmental, H&S employees to ensure and maintain compliance with safety, operational, and regulatory standards of Quality, • 2 years minimum experience in programming and setup?, • Ability to read and interpret 2D prints, 3D models, and work instructions, • Knowledge of sheet metal and punch assembly tooling, • Ability to use basic measurement instruments to verify components meet requirements, • Ability to communicate verbally, • Excellent time management skills, • Ability to Lift up to 50 lbs, Stand and Bend frequently without issue, • Ability to work in a non-climate-controlled production environment

Job Description We are seeking a skilled and detail-oriented CNC Machinist to join our team. The ideal candidate will be responsible for setting up, operating, and maintaining computer numerical control (CNC) machines to produce high-quality parts and components according to specifications. This role requires a strong understanding of machining principles, blueprint reading, and precision measurement. Responsibilities: • Set up CNC machines (mills, lathes, etc.) by loading programs, adjusting machine settings, and installing appropriate tools., • Operate CNC machines to perform various machining operations, including drilling, milling, turning, and boring., • Monitor machine operations to detect malfunctions or deviations from specifications and make necessary adjustments., • Read and interpret blueprints, technical drawings, and G-code to ensure accurate production., • Perform in-process inspections using precision measuring instruments (calipers, micrometers, gauges) to verify part dimensions and quality., • Troubleshoot and resolve basic machine alarms and issues., • Perform routine maintenance on CNC machines to ensure optimal performance and longevity., • Maintain a clean and organized work area., • Adhere to all safety procedures and guidelines., • High school diploma or equivalent; completion of a vocational program or apprenticeship in machining is a plus., • Proven experience as a CNC Machinist or similar role., • Proficient in setting up and operating various CNC machines (e.g., Haas, Fanuc, Mazak controls)., • Strong ability to read and interpret blueprints, technical drawings, and G-code., • Excellent understanding of machining principles, cutting tools, and materials., • Proficient in using precision measuring instruments (calipers, micrometers, height gauges, etc.)., • Strong attention to detail and a commitment to producing high-quality work., • Ability to troubleshoot and problem-solve effectively., • Good communication and teamwork skills., • Experience with CAM software., • Experience with specific materials (e.g., aluminum, steel, plastics, exotic alloys).

Job Description Base Pay: $18 - $19/ hour Daytime and Evening Shifts available FULL TIME & PART TIME PPE is provided for all cases Work in your neighborhood and give back to your community. BAYADA Home Health Care has an immediate need for HHA - Home Health Aides to care for our clients. As a member of our home care team, you will be valued, respected, and heard. We have current job openings for HHAs– Home Health Aides in the following locations: • Bloomfield, • Cedar Grove, • Fairfield, • Livingston, • Maplewood, • Montclair, • Nutley, • Roseland, • Short Hills, • The Caldwells, • The Oranges, • Verona, • All of Essex County We also offer Home Health Aide Certification Classes! BAYADA offers Home Health Aides (HHAs) the following benefits: • Home Care Field Employees are eligible for any of BAYADA's group medical, prescription drug, dental, and vision benefits if you work an average of 30 hours per week over a 3-month measurement period., • Home Care Field Employees working less than 30 hours per week are eligible for the Minimum and Enhanced Minimum Coverage Plans., • To learn more about BAYADA Benefits, click here, • Weekly pay, • Flexible scheduling to fit your lifestyle, • Short commute times – we try to match you to opportunities near your home, • Positive work environment and the tools you need to do your job, • Scholarships, • A stable working environment – we invest in our care team, • Paid time off, • Minimum one year work references in any type of field. - "Newly certified welcome", • Current HHA - Home Health Aide license listed in good standing with the board, • Must have reliable transportation, • Must be able to communicate in English, • Must be authorized to work in the US, • Activities of daily living, • Light housekeeping, • Grooming, • Toileting, • Range of motion / exercises, • Transfers / use of mechanical lifting devices, • Oral feeding, • Bathing, • Vital sign checks: temperature, pulse, respiration, • Home Management Tasks: laundry, meal preparation, bed making etc., • Assisting with ambulation As an accredited, regulated, certified, and licensed home health care provider, BAYADA complies with all state/local mandates. BAYADA is celebrating 50 years of compassion, excellence, and reliability. Learn more about our 50th anniversary celebration and how you can join in here. BAYADA Home Health Care, Inc., and its associated entities and joint venture partners, are Equal Opportunity Employers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other similarly protected status in accordance with federal, state and local laws. Hence, we strongly encourage applications from people with these identities or who are members of other marginalized communities.

Job Description Cerebral and Resilience Lab have joined forces to build a new standard in mental health care—one that emphasizes better outcomes through stronger clinical decision-making, rigorous training, and professional excellence. By combining Resilience Lab's Methodology & clinically-led training Institute with Cerebral's extensive reach, clinical network, and care capabilities, we are creating a national model for high-quality, integrated, and accessible behavioral health care. We believe quality mental health care starts with curiosity, professionalism, and mastery of clinical decision-making. Joining our team means committing to show up on your best foot every day where you'll be equipped with structured training, supportive supervision, and a methodology designed to guide you in making sound clinical decisions. The Role: We are seeking Therapy Associates (provisionally licensed clinicians) who want to develop expertise in clinical-decision making and lay the foundation for a lasting career. This role is about more than logging sessions – it's about committing to professional excellence, curiosity, and applying our Methodology to deliver better outcomes for clients. Training kicks off with a two-week, structured program delivered live through online video sessions from 12–2 pm ET, plus asynchronous assignments. Continue growing through ongoing learning and supervision that emphasizes reflection, reasoning, and quality clinical judgement. From your very first interaction, you are expected to put your best foot forward—professional, present, and focused on delivering high-quality care. By embracing our approach, you will gain the skills and judgment that will guide your career in mental health care. This is a W-2 Fee-for-Service position, offering $55.00 per unit of time worked. Who you are: • Master's degree in social work or counseling, • Provisionally Licensed in New Jersey under one of the following: LSW or LAC, • Up-to-date CAQH profile and active NPI number are required, • Minimum of 6 months of experience providing psychotherapy under supervision, is preferred (Maximum requirement for our training program is at least 6 months of supervision still needed), • Skilled in diagnosing mental health disorders in accordance with DSM-5 criteria, • Committed to building your caseload to 50 sessions/month by the end of week 20, • Comfortable collaborating with prescribers who are managing clients' medications, • Knowledgeable in crisis response, with strong evidence-based clinical skills & experience implementing measurement informed care, • Empathetic and intuitive listening with strong verbal and written communication skills, • Comfortable working autonomously in a telemedicine environment, balancing independence and asking for help, • Commit to professionalism in every client interaction — showing up with trust, quality, therapeutic presence, and building rapport quickly in a telehealth environment, • Tech-savvy & adaptable with the ability to navigate various systems & tools autonomously with ease (this includes, but is not limited to Google Workspace, proprietary EMR, etc.), • Access to a reliable computer (cannot be Chromebook) and high speed internet, • A self starter, entrepreneurial spirit, or previous experience within a startup or fast-paced environment is preferred, • Provide high-quality psychotherapy services (60-minute individual, couples, group, and/or family sessions) with a focus on clinical decision making, and measurable outcomes, • Participate in supervision to reflect on client sessions, explore transference and countertransference, further develop your clinical decision-making skills and evaluate clinical outcomes through review of intake notes, treatment plans, assessments, and progress notes, • Commit to quality and professionalism in every client interaction — how you show up on camera, how you communicate, and how you model trust are central to client outcomes, • Create your own flexible schedule (scheduled time must fall within the hours of 6:00am to 11:30pm per your specific timezone), • Minimum of 20 hours of weekly availability is required so you have the ability to build your caseload longer term, • Maintain a minimum of 50 sessions per month by the end of your 20th week, and continue caseload growth thereafter, • One evening or weekend availability per week is required for your first year, • Document with rigor and efficiency—complete treatment plans, progress notes, and assessments promptly, submitting all session documentation within 48 hours, • Actively participate with the Cerebral Institute for continued learning through monthly Amplified Learning Series sessions and live/self-paced courses offering continuing education credits toward licensure, • Work alongside other like-minded clinicians that have a common goal to positively impact the lives of others, and create an environment that leads to favorable outcomes for clients, • Join optional monthly company-wide Town Halls to stay connected and informed, or view the recording if unable to attend live, • Professional Development: Complimentary access to the Cerebral Institute for clinical & business training, and growth opportunities to continue your practice with Cerebral following independent licensure, • Supervision: Gain hours toward independent licensure under expert supervision, • Marketing & Referrals: We'll support you as you build your client base, including covered fees for Zocdoc, Psychology Today, and Zencare listings, • Care Team Support: Dedicated team to manage inquiries from your referral platforms, connect clients to your expertise and availability, and assist with scheduling sessions, • Administrative Ease: Streamlined admin workload through technology, automations, and a dedicated billing team, so you can focus on clients, • Fully integrated, data-enabled EMR with embedded clinical decision support, monthly prescriber metric reports, and task management system, • Flexibility: Work from anywhere in the U.S. and create a schedule that fits your lifestyle, while maintaining availability for one evening or weekend shift per week, • We Deliver Client Impact: Relentlessly focusing on advancing personalized, high-quality, evidence-based care that improves people's lives, • We are One: Bringing our collective expertise together as a unified team, strengthened by collaboration, trust, diversity of thought and shared purpose, • We Aim Higher: Continuously curious to drive our learning, our innovation and our personal growth to reach our full potential, • We are Generous: Giving more than we take with compassion, empathy, support, openness and a willingness to help those in need Cerebral, Inc. is a management services organization that provides health information technology, information management system, and non-clinical administrative support services for various medical practices, including Cerebral Medical Group, PA and its affiliated practices (CMG), who are solely responsible for providing and overseeing all clinical matters. Cerebral, Inc. does not provide healthcare services, employ any healthcare provider, own any medical practice (including CMG), or control or attempt to control any provider or the provision of any healthcare service. "Cerebral" is the brand name commonly used by Cerebral, Inc. and CMG.

Job Description Allied Digestive Health is one of the largest integrated networks of gastroenterology care centers in the nation with over 200 providers and 60 locations throughout New Jersey and New York. As a fast-growing physician-led organization, our dynamic structure encourages physician input and decision-making, while simultaneously offering operational support. Our dedicated, compassionate team of providers prioritize personalized treatment plans for patients that deliver the highest quality of care. All of our doctors are board-certified in gastroenterology and hepatology. Several of them serve as chief of gastroenterology at nearby hospitals, and a number of them have been recognized as top-quality physicians in publications, including but not limited to: Best Doctors in America and Top Doctors New Jersey, and US News Health – US News & World Report. About the Role: The Medical Assistant plays a crucial role in ensuring the smooth operation of our healthcare services. This position is responsible for providing high-quality patient care and support to our medical team, which directly impacts patient outcomes and satisfaction. The Medical Assistant will assist in various clinical tasks, including taking vital signs, performing venipuncture, and managing electronic health records. By effectively communicating with patients and healthcare professionals, the Medical Assistant helps to create a welcoming and efficient environment. Ultimately, this role is vital in facilitating the delivery of exceptional healthcare services to our patients. We are excited to announce that we are looking for a Full Time, Medical Assistant at Gastroenterology Group of Northern New Jersey in Englewood, NJ. This role will support Englewood/Englewood Cliffs NJ Minimum Qualifications: • High school diploma or equivalent., • 1-2 years' experience in a healthcare setting or similar role., • Completion of a medical assistant training program., • Experience in a healthcare setting, particularly in gastroenterology., • Familiarity with electronic health record (EHR) systems., • Take and record patients' vital signs and medical histories accurately., • Manage electronic health records, ensuring all patient information is up-to-date and confidential., • Answer multi-line phone calls, schedule appointments, and handle patient inquiries with professionalism. The required skills of vital signs measurement and medical assisting are essential for daily patient interactions, ensuring accurate assessments and care. Familiarity with electronic health records allows the Medical Assistant to efficiently manage patient data, contributing to streamlined operations. Strong communication skills are necessary for handling multi-line phone systems and addressing patient inquiries, fostering a positive patient experience. Finally, critical thinking skills are employed to assess situations and make informed decisions that enhance patient care and support the medical team. We offer competitive base salary, generous benefits, including Medical, Dental, Vision, Life Insurance, Voluntary, Time-Off Benefits, EAP, 401K and Commuter Benefits. Job Type: Full Time Monday thru Friday 8:30am to 5:30pm

Job Description The Lab Technician is a position that works in a high performance, customer focused Team environment and is responsible for conducting the daily tasks associated with the Quality Assurance laboratory to maintain the high quality of products produced. The Lab Technician will be responsible for the inspection of raw materials, ingredients and products manufactured to ensure compliance with all internal and customer required specifications through the excellent performance of assigned duties. These actions are to be performed while keeping safety as a primary objective and following all established Good Manufacturing Practices (GMP’s), Regulatory, and Company policies and procedures. As an integral member of the Quality Control Team, the Lab Technician plays a pivotal role in ensuring that a high level of collaboration and flexibility occurs between the QC Team and all other support and production departments to not only meet but exceed the operational and production goals set for the facility while making sure that the Quality of our products and the safety of ourselves and others remain a top priority. Essential Duties & Responsibilities: • Approving incoming components by confirming all materials meet required specifications; this is done through conducting both visual and measurement tests; responsible for rejecting and returning all unacceptable materials., • Confirms all in-process production meets required specifications and approves products when visual and measurement tests have proven product meets designated stipulations; must effectively communicate any and all required adjustments to the Production Supervisor., • Approves finished products by confirming specifications are met and conducting visual and measurement tests; prepares certificates of analysis and any certificates of compliance as needed., • Documents inspection results by fastidiously completing reports and logs accurately and with timeliness., • Excellent data entry skills required for inputting accurate and detailed data into the quality database, • The ideal candidate will be proactive in discovering deviations from company and customer standards and providing immediate notification to operators and supervisors, • Responsible for monitoring and inspecting process control points, critical control points, and essential quality attributes, an employee in this role must be familiar with all the essential quality attributes of AAK Foodservice products., • Keeps measurement equipment operating by following operating instructions; calibrating equipment and assist with submissions of work orders when needed., • Collects and submits samples to outside laboratories as needed., • Maintains safe and healthy work environment by following standards and procedures, complying with legal regulations., • Accomplishes quality and organization mission by completing related results as needed., • Verifies cleanliness of equipment while working in conjunction with sanitation personnel., • High school diploma, GED required, • AAS or BS degree in a laboratory science (e.g. in microbiology, biochemistry, biology, food technology), or Experience as a QA Technician in a food or like manufacturing (consumer products) environment or equivalent experience in an industrial lab required, minimum of 2 years., • Auditing experience preferred but not required., • Demonstrated technical knowledge in Quality Processes and systems including but not limited to: SPC, HACCP, Operating procedures, and Manufacturing practices., • Ability to work with minimal supervision in a fast-paced environment, • Ability to make objective and independent decisions, • Ability to read, write, and comprehend written instructions, product specification sheets, work instructions, technical documents and manuals., • Bi-lingual English / Spanish preferred, • Strong written and verbal communication and interpersonal skills., • Ability to introduce information to a group or in a group meeting, perform training to new employees, and assist in preparing new procedures, work instructions, etc., • Demonstrated ability to perform with consistent accuracy with detail-oriented work., • Ability to prioritize multiple tasks and organize work efficiently. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee is regularly required to stand; walk; use hands to fingers; reach; stretch; bend; kneel; crouch; climb; balance; etc., • The employee must regularly lift and/or move up to 50 pounds. Plant operations, environment and hours. Able to manage through urgent situations. The job is performed in a manufacturing plant environment. Exposure to loud noises, dust, dirt, heat, sparks, oil, and smoke may occur—earplugs / ear protection required in this area. Personal protective equipment (safety glasses, steel-toed shoes, appropriate clothing) is required in manufacturing plants.

Job DescriptionGENERAL SUMMARY: The Recovery Corner Manager is responsible for personally ensuring a positive customer experience through personal production and coach supervision. Responsible for delivering excellent member service and driving Fitness and Recovery Corner revenue and meeting goals. Will address member concerns, employee relations issues, and oversee scheduling and time-keeping activities as needed. Communicate and enforce Company and Club policies and procedure on a regular basis. This position requires week days and a minimum of 8 hours on the weekend on either Saturday, Sunday or a combination of both days. ESSENTIAL DUTIES & RESPONSIBILITIES: Ensure accurate administration of Client Programs, supplement purchases, measurement tracking, workout and recovery programs. Arrive on time, prepared and attentive for all appointments. Assist in all revenue generating activities, including but not limited to: complimentary workouts, recovery booths, body fat tables, seminars, workshops, etc. Sell training & recovery sessions by executing an effective prospecting strategy, conducting guest tours, and completing sales when needed through the turn-over process. Responsible for achieving monthly revenue objectives set forth by the Company with regards to fitness, recovery and supplements. Review daily club sales performance and individual employee performance statistics with the Fitness Manager, Vice President and team members to identify issues and clarify behaviors needed to achieve club sales goals. Administer company policies as they relate to the sales process. Set monthly, weekly and daily goals and objectives aligned with Companys expectations. Conduct monthly and weekly meetings with the Fitness Manager to review performance and operations. Handle member service matters including club tours, explanation of Recovery Corner services, and member sign ups, agreements and appointments. Mediate and resolve member issues and concerns in a timely and effective manner, elevating issues when appropriate. Perform and manage the completion of all administrative and housekeeping duties within the Recovery Corner (as outlined in daily and weekly checklists). Conducts daily facility walkthroughs and alert the Operations team of repairs and maintenance needs. Supervise coach sales activities, agreements and daily paperwork. Comply with operational procedures in the Recovery Corner and follow-up with compliance checks through the monitoring of club systems and employee performance. ORGANIZATION RELATIONSHIPS: The Recovery Corner Manager will report directly to the Fitness Manager and/or General Manager. Communicate and enforce all Policy and Procedures with the Fitness & Recovery Corner Team. Duties require interaction with all club management, employees and club members. REQUIRED QUALIFICATIONS: • Adhere to meal and rest break periods and must clock in and out for all shift times. This position description intends to describe the general nature and level of work being performed by people assigned to this job. It is not intended to include all duties and responsibilities. The order in which duties and responsibilities are listed is not significant.