Mechanical engineer government jobs in New York, New YorkCreate job alerts

Description We are seeking a Lead Transmission Line Engineer who will manage a collaborative and dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The successful candidate will serve as a Lead Engineer and Technical Project Manager on high voltage electric transmission line design projects of overhead and underground systems for some of the largest utilities in the country as well as regional utilities. The candidate will apply NESC, ASCE, ACI, NEC, and other applicable standards in the engineering and design of all types of capital and maintenance projects from 34.5 kV to 765 kV. Additionally, the candidate will direct a team of engineers that regularly perform engineering analyses, PLS-CADD modeling, structure loading calculations, foundation design using MFAD and/or LPILE, design structure framing and hardware assemblies, draft plans and specifications, and prepare bill of materials and procurement documents across project planning, engineering, environmental, permitting, and construction management phases. The successful candidate can expect a fast-paced, diverse work environment and flexible work hours/work arrangements as well as a manager and peers who will encourage career development and growth! In addition, the successful candidate will be involved in applying AI, automation, and digital design platforms to streamline grid modernization and increase design efficiency. This is a senior leadership role with primary responsibilities in client relations, staff management, proposal development, scope creation/change, project execution, and new business capture for the team’s full book of work. The successful candidate will be able to communicate clear expectations, goals, and vision; manage the performance of direct reports; motivate, coach, and mentor skilled professionals; and appropriately delegate project work. The candidate must be capable of managing collaboration and a positive team culture to achieve successful results. Location: This position is a hybrid work position with the potential for remote work for the right candidate located in Pennsylvania, Ohio, or West Virginia. Relocation assistance may be available for qualified candidates. The Challenge: • Direct multiple design teams simultaneously executing various projects and programs for multiple clients., • Develop a team of engineers by training, coaching, and nurturing Leidos’ engineering talent., • Supervise staff by approving timesheets and running the annual performance review process., • Participate proactively as a member of the leadership team of the Transmission Line Section., • Create responses to RFPs, RFIs, and RFQs from clients for new work, including proposal creation and definition of scope of work., • Possess a growth mindset to foster creative problem solving for our clients’ most complex issues., • Promote continuous improvement to develop streamlined processes and tools that facilitate improvements to departmental technical resources via innovation and automation., • Delegate tasks to staff, forecast and plan their future workload, and run recruiting activities to support aggressive growth goals., • Drive the quality control process for the execution team to ensure the highest level of quality in all deliverables., • Liaise with clients to maximize affinity, facilitate business development growth, and foster long-term relationship building., • Manage portfolio health by leveraging Project Managers to independently drive and monitor scope, schedule, and budget. Accountability for schedule compliance requires high awareness and support from assigned Lead Engineers. What Sets You Apart (Required): • Bachelor’s degree in Civil, preferred, or Mechanical Engineering with eight plus (8+) years of relevant experience in the design of high voltage electric utility transmission systems., • Expertise in PLS-CADD and PLS-POLE., • Engineer In Training (EIT) certification., • Work effectively in a team environment; can also work independently., • Track record of outstanding communication to serve as primary point of contact for existing and perspective clients., • Business acumen with a record of understanding and meeting key project performance metrics., • Working onsite in a Leidos or client office is a possibility; some periodic travel may be required., • Ability and passion to develop staff through mentoring. Favorable If You Have: • Two plus (2+) years of supervising staff., • M.S. degree in Structural Engineering., • Experience with TOWER., • P.E. certification or the ability to achieve P.E Certification in 6 months., • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus. Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PowerDelivery PDSTLINE If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. November 3, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $92,300.00 - $166,850.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today! Staff Designer, MCAD Position Profile: The Staff Designer (CAD Designer) provides computer aided design and technical drawing support for new product research and development, including derivatives of our existing product lines under the direction of design engineers the designer shall be capable of interpreting industry design and drafting standards, military specifications and company internal procedures. Minimum Required Qualifications: • Associates degree, Mechanical engineering technology degree or Electrical technology degree, • 6-10 years' experience working as an electro-mechanical designer, • Experience with PTC Technology at least Creo 4.0 and Windchill 12.0, • Experience in mechanical design, material properties, fits and finishes, geometric tolerancing (GD&T) is required, • Strong PTC CREO CAD solid modeling experience and understanding of mechanical design principle, • Demonstrated strong knowledge of separating operations such as turning, milling, drilling, boring and tapping metallic and polymer materials, • Knowledge of fluid components, including sealing element designs, bearings and other mechanical elements, electro- mechanical packaging, PCB design, harness design a plus., • Strong verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, • Highly computer literate, with MS Office/PC expertise, and demonstrated experience with applicable systems, programs, equipment, etc., • Must be a US Citizen Essential or Primary / Key Responsibilities: • Prepare detailed 3D design layouts of complex parts and assemblies, including fits, finishes, tolerances and materials selection, as requested by the project engineer., • Prepare simple design layouts of parts and assemblies, including fits and tolerances as requested by the project engineer or higher level designers, • Prepare detailed manufacturing documentation of parts and assemblies in accordance with all company and industry standards, including a thorough tolerance stack-up to prove out design intent for fit and function., • Support the creation of a standard library of parts and features for re-use later to support the department's needs., • Maintain existing documentation through the preparation and incorporation of ECN's and AECN's, • Effectively interprets industry design and drafting standards, military specifications and company internal procedures, • Participate in selected PDR and CDR reviews to help present design parameters., • Must be capable of performing basic trigonometry and solid geometry calculations., • Detail checking of assemblies and drawings to company standards. Including redraws., • Must be knowledgeable in the practical application of Geometric tolerances (GTOL)., • Prepare fully annotated drawings of parts and assemblies from 3D Assembly models., • Responsible for utilizing existing Marotta hardware for new designs/redesigns. This would include detail searches using Marotta's business system and custom software., • Own projects from concept through production in an integrated and product development professional team environment, • Analyze designs and determine opportunities for design improvements., • Work with engineers to develop and evaluate the feasibility of designs., • Analyze and apply tolerances on parts in a way that satisfies the design needs while satisfying manufacturing and inspection.(GD&T certificates preferred), • Create as-built drawing package with a high level of efficiency, • Conduct research as needed, • Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required)., • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to all regulatory and internal system requirements., • Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization, • Actively participate in team meetings, improvement initiatives/programs, etc. and support actions to drive company initiatives/goals, • Assist in the training of personnel to perform required technical tasks (as directed), • Consistently demonstrate commitment to company values, • While performing the duties of this job, the employee is regularly required to talk and hear, • The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feel, • The employee is regularly required to stand, sit, walk, stoop, or crouch, and move about the facility, • While performing the duties of this job, the employee is frequently exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to: fluids, fumes or airborne particles, moving mechanical parts, noise and vibration, • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • Temperature of work environment may be affected by outside/external temperatures, machining processes, etc., • Days and hours of work are 8 hours/day (Monday through Friday). Overtime and weekend could be required as job duties demand., • No travel is expected for this position We offer a highly competitive compensation package for this outstanding position plus a quarterly bonus along with a full range of top quality benefits and employee services including: medical, prescription, dental, vision, life and disability income insurance programs, 401k retirement plans with company match, generous tuition aid program, paid vacation, sick and personal days, paid holidays and flexible work hours with compressed work week options. We recognize and reward our employee's accomplishments and host several employee engagement events per quarter. This position is at our Parsippany, NJ office location. Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at We are an Affirmative Action and Equal Opportunity employer M/F/IWD/Veterans VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $95,000 - $110,000 per year

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today! Staff Mechanical Designer Position Profile: The Staff Designer (CAD Designer) plays a crucial role in delivering exceptional computer-aided design and technical drawing support for innovative Space product research and development. This position involves creating cutting-edge designs for new products as well as enhancing our existing product lines. Working closely with design engineers, the designer confidently interprets industry design and drafting standards, military specifications, and internal company procedures to ensure top-quality results. Minimum Required Qualifications: • Associates degree, Mechanical engineering technology degree., • 6-10 years' experience working as a mechanical designer (CAD), • Experience with PTC Technology at least Creo 9.0 and Windchill 12.0. (certificates preferred), • Experience in mechanical design, material properties, fits and finishes, geometric tolerancing (GD&T) is required, • Strong PTC CREO CAD solid modeling experience and understanding of the Windchill change notice creation., • Strong verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, • Highly computer literate, with MS Office/PC expertise, and demonstrated experience with applicable systems, programs, equipment, etc., • Must be a US Citizen Essential or Primary / Key Responsibilities: • Prepare detailed 3D design layouts of complex parts and assemblies, including fits, finishes, tolerances and materials selection, as requested by the project engineer., • Prepare simple design layouts of parts and assemblies, including fits and tolerances as requested by the project engineer or higher level designers, • Prepare detailed manufacturing documentation of parts and assemblies in accordance with all company and industry standards, including a thorough tolerance stack-up to prove out design intent for fit and function., • Support the creation of a standard MCAD library of parts and features for re-use later to support the department's needs., • Maintain existing documentation through the preparation and incorporation of Engineering Change Notices., • Effectively interprets industry design and drafting standards, military specifications and company internal procedures, • Participate in selected PDR and CDR reviews to help present design parameters when required., • Detail checking of assemblies and drawings to company standards. Including redraws., • Must be knowledgeable in the practical application of Geometric tolerances (GTOL)., • Prepare fully annotated drawings of parts and assemblies from 3D Assembly models., • Responsible for utilizing existing Marotta hardware for new designs/redesigns. This would include detail searches using Marotta's business system and custom software., • Own projects from concept through production in an integrated and product development professional team environment., • Analyze designs and determine opportunities for design improvements., • Work with engineers to develop and evaluate the feasibility of designs., • Analyze and apply tolerances on parts in a way that satisfies the design needs while satisfying manufacturing and inspection.(GD&T certificates preferred), • Create as-built drawing package with a high level of efficiency and accuracy., • Performs basic engineering calculations, tolerance stack-ups, and determines the proper fits of moving and stationary parts Additional Duties / Responsibilities: • Conduct research as needed, • Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required)., • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to all regulatory and internal system requirements., • Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization, • Actively participate in team meetings, improvement initiatives/programs, etc. and support actions to drive company initiatives/goals, • Assist in the training of personnel to perform required technical tasks (as directed), • Consistently demonstrate commitment to company values, • Keep management informed of area activities and of any significant problems. Physical Requirements: • While performing the duties of this job, the employee is regularly required to talk and hear, • The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feel, • The employee is regularly required to stand, sit, walk, stoop, or crouch, and move about the facility, • The employee may be required to lift and/or move items weighing up to 25 pounds Work Environment: • While performing the duties of this job, the employee is frequently exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to: fluids, fumes or airborne particles, moving mechanical parts, noise and vibration, • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • Temperature of work environment may be affected by outside/external temperatures, machining processes, etc., • Flexible Scheduling Options: Days and hours of work are either 10 hours/day (Monday - Thursday) or 9 hours/day (Monday through Thursday), 4 hours (Friday - Remote). Overtime and weekend could be required as job duties demand., • No travel is expected for this position This position is at our Parsippany NJ office location. Pay Range: $95,000 - $110,000 Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $95,000 - $110,000 per year

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today ! Manufacturing Engineer II - Turning (2nd Shift) POSITION PROFILE: This position is primarily responsible for creating, maintaining and optimizing CNC Programs (Milling & Turning Centers), Operation/Tool Sheets, Mfg. Routers and tool/fixture designs utilizing best practices to effectively support machine shop operations for Marotta Controls, Inc. Your knowledge/expertise should include both Gibbs or Mastercam, and PRO-E. This knowledge will be applied during the design phase of new products, redesign phase of existing products, equipment set-up activities, cost estimates, facility layout plans, root cause troubleshooting and continuous improvement initiatives. The incumbent must be a dynamic individual who can multi-task and oversee various activities associated with aerospace manufacturing ensuring that Mfg. Eng. activities are conducted in a manner that complies with company requirements (i.e. regulatory, safety, administrative, etc.). This position requires effective interaction with a broad spectrum of people both internal and external to the organization to successfully support operations and the corporate strategic vision. Minimum Required Qualifications: • 5 years of related experience in a machine shop manufacturing environment (Aerospace preferred, but not required), • 2 years of Gibbs and/or Mastercam & PRO- E usage, • High School or (GED) Diploma, Bachelor's degree in Mfg. Engineering or related field preferred, • Self-motivated individual who possess the ability to analyze, organize, plan, prioritize assignments, multi-task and achieve results through interaction with others, • Possess math skills required to design tools/fixtures and generate accurate, safe CNC Programs in an effective manner. Ability to interpret various types of graphs and data required for problem solving, SPC, etc., • Demonstrate effective verbal/written communication skills required for interacting with all levels of personnel both internal and external to the organization, • Secure external resources (subcontracted services) to maintain and ensure machine shop equipment is operational, • Knowledgeable/proficient in the areas of Lean Manufacturing concepts, employee training, development of equipment, operation, & training procedures/policies, effective application of mfg. methods, tool/fixture design, material selection, facility layout plans, cost estimates, DFM concepts, GT&D practices, machine shop documentation (operator./tooling sheets, routers, etc.), root cause investigations, trouble shooting, performance metrics and machine shop operational activities, • Must be computer literate. Demonstrate proficiency using Gibbs or Mastercam & PRO-E, CAD/CAM., • Ability to read, interpret documents (i.e. procedures, blueprints/technical drawings, etc.) and use necessary measuring devices/equipment to confirm tooling/fixturing geometries and dimensions, • Must be a US Citizen ESSENTIAL DUTIES / RESPONSIBILITIES: • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements, • All practices and activities related to Mfg. Eng. must be performed in a manner which supports commonality, standardization (where applicable), First Past Yield and utilization of safe/best industry practices, • Create, maintain and refine detailed mfg. documentation (i.e. Operation Sheets, Routers, Set-up/Tooling sheets, etc.) through effective selection of manufacturing methods (inclusive of inspection point selection), • Assist in securing external resources (subcontracted services) to maintain and ensure machine shop equipment is operational to achieve production efficiencies, and on-time customer shipments, • Generate, optimize, validate and maintain C.N.C. Programs for CNC MILLING and CNC TURNING CENTERS through the effective application of Gibbs & PRO-E CAD/CAM software, • Design efficient/safe tools and fixtures required to support machine shop operations, • Generate accurate estimates (i.e. set-up, cycle time, material, etc.) using cost effective mfg. methods, • Define, monitor and communicate the status of performance metrics to management. Implement appropriate actions to resolve identified issues, • Effectively communicate issues in a timely manner to all affected parties internal/external to the Marotta Organization, • Train and provide guidance to personnel required to support the goals and objectives associated with Mfg. Eng. and machine shop operations, • Foster a positive, cooperative and safe work environment through effective communication at all levels of the Marotta organization, • Actively participates in team meetings, root cause investigations, trouble shooting activities (as req'd), continuous improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support company initiatives/goals/vision Work Environment : • While performing the duties of this job, the employee is frequently exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to: fluids, fumes or airborne particles, moving mechanical parts, noise and vibration, • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • Temperature of work environment may be affected by outside/external temperatures, machining processes, etc., • Overtime and weekend may be required, if job duties demand., • No travel is expected for this position Physical Requirements : • While performing the duties of this job, the employee is regularly required to talk and hear., • The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feel, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus., • The employee is regularly required to stand at length (7-8 hours, daily), sit, walk, stoop, bend, turn, balance, and/or crouch, and move about the facility., • The employee may be required to lift and/or move items weighing up to 40 pounds, and occasionally up to 70 lbs. This position is at our Montville, NJ corporate offices location. Pay Range: $33.00 - 42.00/hour + shift differential Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $30 - $36 per hour

Position Summary Soil Solutions Inc. is seeking an experienced Project Manager to lead the delivery of assigned projects from preconstruction handoff through closeout. This role is responsible for overall project execution—including safety leadership, financial performance, scheduling, client coordination, subcontractor management, and quality control. The Project Manager serves as the primary point of contact for owners and project partners and works in close coordination with the Superintendent(s), Project Engineer(s), and leadership team to ensure each project is delivered safely, efficiently, and profitably. Project Managers report to a company owner. Core Responsibilities1) Safety Leadership At Soil Solutions Inc., safety is non-negotiable. The Project Manager is expected to lead by example and actively drive jobsite safety performance. • Maintain overall responsibility for jobsite safety in accordance with the project SSHASP and Soil Solutions Inc. standards., • Ensure compliance with OSHA and all applicable federal, state, and local safety requirements, driving incident-free execution., • Verify consistent completion of safety planning and leading indicators, including:, • AHA’s (Activity Hazard Analyses), • Toolbox Talks and Safety Huddles, • Jobsite safety documentation and tracking, • Participate in, and when needed lead, toolbox talks and safety huddles., • Complete and verify daily safety reporting in company project systems (ex: Procore)., • Review jobsite monitoring tools (ex: Arrowsight), address issues immediately, and implement corrective action plans., • Conduct routine safety walks with safety personnel and field leadership to ensure compliance and accountability., • Ensure 811 / Miss Utility locates are completed before any ground disturbing work begins., • Require test holes and field verification methods when needed to prevent utility strikes., • Report utility incidents immediately to the Project Executive or Division Manager and support corrective actions., • Lead Safety Stand-Downs and support incident investigations and root-cause analysis as required., • Maintain jobsite cleanliness, organization, and proper storage of materials and equipment. 2. Financial Management & Project Compliance The Project Manager is accountable for the project’s cost performance, billing, and contract compliance. • Perform daily and weekly quantity tracking to verify progress and production., • Prepare weekly and monthly cost reports and cost detail updates., • Utilize field productivity tools as needed (ex: HeavyJob timecard entry and production tracking)., • Interpret estimating and production outputs when applicable ., • Prepare monthly pay applications and coordinate with the client to support prompt payment., • Identify, track, and communicate all extra work / non-contract work to leadership., • Lead change management from start to finish, including:, • Meeting contract notice requirements, • Pricing and submitting change orders, • Supporting time impact analysis and delay claim documentation when required, • Maintaining detailed project documentation, • Review and approve payables including subcontractor and vendor invoices., • Confirm accuracy of payroll and equipment reporting and resolve discrepancies quickly., • Lead monthly and quarterly forecasting / cost-to-complete reporting., • Ensure subcontracts and purchase orders are executed on time and meet client and company requirements., • Ensure compliance with all project-specific requirements including certified payroll and workforce reporting when applicable., • Support client participation goals for small/disadvantaged/minority businesses where contractually required. 3. Scheduling, Planning & Production Execution This role requires strong planning, schedule ownership, and day-to-day coordination with the field. • Lead development of the baseline project schedule (CPM) and obtain required approvals., • Review and approve weekly look-ahead schedules and verify they align with the baseline CPM schedule., • Lead schedule updates and submissions in accordance with contract requirements., • Coordinate work sequencing with Superintendent(s), subcontractors, vendors, and project stakeholders., • Coordinate utility requirements and provider scheduling as needed., • Participate in constructability reviews, value engineering, and proactive problem-solving., • Review and approve work packages for field execution., • Represent Soil Solutions Inc. in meetings with owners, designers, project partners, and internal stakeholders., • Hold regular coordination meetings with Superintendent(s) and Project Engineer(s) to plan:, • Equipment and material needs, • Subcontractor scheduling, • Staffing and production goals, • Risk items and constraints, • Understand bid assumptions and convert them into field execution targets., • Ensure long-lead material procurement supports schedule demands., • Partner closely with field leadership to ensure project deliverables are achieved safely and efficiently. 4. Quality Control & Documentation Project Managers are expected to set the standard for quality and project records. • Use Soil Solutions Inc. project controls and management procedures to deliver contract requirements., • Coordinate with the Project Engineer(s) and Superintendent(s) to ensure work complies with contract documents and specifications., • Ensure SWPPP inspections are completed as required and deficiencies are corrected and documented., • Address non-conforming work quickly and ensure corrective actions are verified and recorded., • Maintain complete project records in company systems and hard copy format where required., • B.S. Degree in Civil Engineering, Mechanical Engineering, Construction Engineering OR a related 4-year degree in Construction or Environmental Management, plus 7+ years of related construction experience. Experience in heavy construction or specialty civil work, including one or more of the following: • Drilled Micropiles, Large Diameter Caisssons, CFA and Tiebacks, • Driven Deep Foundation Piles or vibrated sheet piles, • Helicals or Stelcor Piles, • Civil infrastructure and sitework, • Roads, bridges, or transportation work, • Environmental construction, • Support of excavation, • Cast-in-place concrete foundations, • Underground utility systems, • Strong organizational skills, attention to detail, and urgency in execution., • Effective client communication and ability to lead meetings professionally., • Ability to perform in a fast-paced environment while managing multiple priorities., • Proficiency interpreting plans/specs and coordinating execution with field teams., • Valid Driver’s License required, • Ability to obtain site credentials such as TWIC, DBIDs, or similar access requirements for restricted/government sites

Job DescriptionHotel Engineer Now is your opportunity to become part of an extraordinary team. You bring your passion and hospitable personality and we’ll bring the good vibes. We are seeking an engaged and experienced General Mechanic (Hotel Engineer) to join our Engineering Team in providing exceptional customer service and exceptional experiences to our guests Responsibilities include, but are not limited to: * Ability to build ensure professional and informative interactions with all guests and staff members alike * Precisely and effectively complete all allocated work orders every day or report inadequate orders to the Director for rescheduling * Comply with Hotel processes to effectively perform all maintenance, installation, or repair as needed * Experienced with Painting, Spackle, Light plumbing and electrical * Ability to use ladders of different styles; complete work at elevated areas * Complete tasks on/around rooftop areas, chillers, water towers, etc. * Strong working knowledge of hand and power tools * Working in tight spaces * Ensure all hotel equipment is maintained and repaired as needed for full functionality * Follow the most recent state and government legislative codes, laws, and prerequisites * Identifying issues, creating or providing solutions, take actions to ensure that guest- related issues are resolved promptly once received, and provide the best possible outcome for guest satisfaction * Ensure daily before shift ends to fill out engineering reports to record all that was completed on your shift or pass-on information for the next shift * Ensuring all job requests from all areas of the hotel are responded to in a timely and effective manner. * Collaborate with different departments like carpenter, electricians, overnight engineers, painter’s, outsourced contractors in finalizing, changing, altering, remodeling, fixing any area of the Hotel * Follow all safety guidelines of a fire safety director in the case of an emergencies * Ensure FSD logbooks are always up to date with current activities of the hotel * In case of emergencies, communicate with the fire department and monitor fire command station * Make announcements to the building in case of false alarms, tests or real emergencies as a FSD * Ensure boiler cleaning logs are always up to date and cleaned as necessary according to boiler guidelines * Precisely record equipment readings, meter readings and keep up exact logs in a clear and legible way * Ensure that guest room preventative maintenance is done according to procedures set forth by the Chief engineer whether weekly, monthly, or quarterly * Ensure guest room and public area filters are changed frequently as instructed by the Director Job Requirements * Previous hotel engineering experience preferred * At least 2 years of Hotel Engineering experience, preferably in a New York City Hotel * Strong working knowledge mechanical systems, painting/spackling light plumbing and light electrical * Great communication skills, professional demeanor and appearance * Ability to prioritize work, meet deadlines, and concentrate on detail in a fast-paced work environment * Must be able to follow basic safety procedures and precautions due to physical risks * Demonstrates interpersonal and communication skills, both written and verbal * Able to work in a team environment and welcome feedback and direction * Capable of standing for prolonged periods of time * Ability to frequently reach, bend, stoop, climb up and down stairs, walk, and carry multiple objects * Flexible schedule to include day shift, night shift, weekends and holidays Preferred Qualifications * Local candidates only * U.S. Citizenship/Work Authorization required * 2-3 years of experience as an engineer working in the service industry * FSD Certification a plus * Verbal and Written communication skills * Be able to speak, write and understand the primary language of the workplace * Ability to lift, push or pull 50 pounds * Proficiency in MS Office and possess basic computer skills * Be able to work Flexible shift if needed Education: * High school or equivalent (Required) * 2 Year/ 4 Year Degree from an accredited College/University (Preferred) License/Certification: * Relevant Advanced trainings and certifications preferred * FSD certification Equal Employment Opportunity employer. We are committed to extending equal opportunity in employment to all qualified candidates who can contribute to the diversity and excellence of our organization. We encourage applications from all qualified individuals without regard to race, color, religion, genetic information, sexual orientation, gender and/or gender identity or expression, marital or parental status, national origin, ethnicity, citizenship status, veteran or military status, age, disability or any other basis protected by applicable local, state or federal laws. Hiring is contingent on eligibility to work in the United States.

Job DescriptionJoin the team at New Jersey’s largest wine and spirits distributor! At Allied Beverage Group, we’re proud of our dynamic, family-based culture and our role in keeping the beverage industry moving. If you're looking for a great company with great people—this is the place to be! Overview The Night Shift Manager is a key leader position in the distribution and operations organization reporting directly to the Operations Director. Requires strong interpersonal and communication skills as well as knowledge of warehouse operations to include inventory control, shipping and receiving operations in a Direct Sales organization. Preference for warehouse automation experience (especially Knapp) and union environment is a plus but not required. Mid-shift Manager directs the mid shift and returns aspects of operations, ensuring the highest level of customer service from the warehouse to customers while improving productivity through continuous improvement in fill rate, throughput, and cost.Responsibilities • Planning- Ability to identify and plan for staffing requirements based on knowledge and forecasting for OSR and Returns. Has the ability to make decisions based on experience in shipping, receiving and inventory control. Ensures that procedures and processes match requirements of the operation. Capability to train and implement new technology and processes while maintaining productivity, • Continuous Improvement – Understanding urgency to reach daily goals during the operation. Learning from trends to Develop and Execute with the management team and frontline correct standard operating procedures and performance-based metrics to drive results through continuous improvement programs, • Building an inclusive culture – Individual and collective accountability, reward and recognition programs, communication designed to develop the frontline employees and build a desirable place to work., • Collaboration- Partnering with Night and Day operations managers, delivery, and Maintenance functions to identify areas of opportunities for improvements to fill rate, throughput, and reduction of cost., • Safety- Direct programs to ensure the safety of all personnel, equipment and property. Provide safety instruction to personnel as needed. Report all work-related injuries immediately. Provide immediate medical attention to injured employees as necessary. Ensure compliance with appropriate government regulations.Qualifications, • Bachelor’s Degree ( Logistics management, Mechanical engineer, or Business Management, • 5+ years of senior supervision level experience within a distribution warehouse, • 7+ years of operation supervision experience, • Preferred: Warehouse automation experience, • Functional system understanding in WMS, Microsoft Office, Excel, PowerPoint, • Ability to work non-traditional business hours including evenings, nights and weekends only when required The Company is dedicated to ensuring a safe and secure environment for our team members and visitors. To assist in achieving that goal, we conduct a drug and background check for all new team members post-offer and prior to the start of employment. The Immigration Reform and Control Act requires that verification of employment eligibility be documented for all new employees by the end of the third day of work. Allied Beverage Group participates in the E-Verify program to confirm employment eligibility of all new hires in the United States. EEO and AI Disclosure Statement Allied Beverage Group is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, genetic information, or any other legally protected characteristics. As part of our recruitment process, Allied Beverage Group uses artificial intelligence (AI) tools to support the initial review of applications. These tools are designed to assist our recruiters in identifying qualifications and experience that align with the requirements of each role. The tools do not make hiring decisions. All final decisions are made by our recruitment team and hiring managers. We are committed to fair and equitable hiring practices. If you have questions about this process or need an accommodation, please contact Human Resources. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionHotel Engineer - Lead Now is your opportunity to become part of an extraordinary team. You bring your passion and hospitable personality and we’ll bring the good vibes. We are seeking an engaged and experienced General Mechanic (Hotel Engineer) to join our Engineering Team in providing exceptional customer service and exceptional experiences to our guests Responsibilities include, but are not limited to: * Ability to build ensure professional and informative interactions with all guests and staff members alike * Precisely and effectively complete all allocated work orders every day or report inadequate orders to the Director for rescheduling * Comply with Hotel processes to effectively perform all maintenance, installation, or repair as needed * Experienced with Painting, Spackle, Light plumbing and electrical * Ensure all hotel equipment is maintained and repaired as needed for full functionality * Follow the most recent state and government legislative codes, laws, and prerequisites * Identifying issues, creating or providing solutions, take actions to ensure that guest- related issues are resolved promptly once received, and provide the best possible outcome for guest satisfaction * Ensure daily before shift ends to fill out engineering reports to record all that was completed on your shift or pass-on information for the next shift * Ensuring all job requests from all areas of the hotel are responded to in a timely and effective manner. * Collaborate with different departments like carpenter, electricians, overnight engineers, painter’s, outsourced contractors in finalizing, changing, altering, remodeling, fixing any area of the Hotel * Follow all safety guidelines of a fire safety director in the case of an emergencies * Ensure FSD logbooks are always up to date with current activities of the hotel * In case of emergencies, communicate with the fire department and monitor fire command station * Make announcements to the building in case of false alarms, tests or real emergencies as a FSD * Ensure boiler cleaning logs are always up to date and cleaned as necessary according to boiler guidelines * Precisely record equipment readings, meter readings and keep up exact logs in a clear and legible way * Ensure that guest room preventative maintenance is done according to procedures set forth by the Chief engineer whether weekly, monthly, or quarterly * Ensure guest room and public area filters are changed frequently as instructed by the Director Job Requirements * Previous hotel engineering experience preferred * At least 2 years of Hotel Engineering experience, preferably in a New York City Hotel * Strong working knowledge mechanical systems, painting/spackling light plumbing and light electrical * Great communication skills, professional demeanor and appearance * Ability to prioritize work, meet deadlines, and concentrate on detail in a fast-paced work environment * Must be able to follow basic safety procedures and precautions due to physical risks * Use ladders, appropriate engineering tools (manual and electric), work at higher elevations * Demonstrates interpersonal and communication skills, both written and verbal * Able to work in a team environment and welcome feedback and direction * Capable of standing for prolonged periods of time * Ability to frequently reach, bend, stoop, climb up and down stairs, walk, and carry multiple objects * Flexible schedule to include day shift, night shift, weekends and holidays Preferred Qualifications * Local candidates only * U.S. Citizenship/Work Authorization required * 2-3 years of experience as an engineer working in the service industry * FSD Certification a plus * Verbal and Written communication skills * Be able to speak, write and understand the primary language of the workplace * Ability to lift, push or pull 50 pounds * Proficiency in MS Office and possess basic computer skills * Be able to work Flexible shift if needed Education: * High school or equivalent (Required) * 2 Year/ 4 Year Degree from an accredited College/University (Preferred) License/Certification: * Relevant Advanced trainings and certifications preferred * FSD certification Equal Employment Opportunity employer. We are committed to extending equal opportunity in employment to all qualified candidates who can contribute to the diversity and excellence of our organization. We encourage applications from all qualified individuals without regard to race, color, religion, genetic information, sexual orientation, gender and/or gender identity or expression, marital or parental status, national origin, ethnicity, citizenship status, veteran or military status, age, disability or any other basis protected by applicable local, state or federal laws. Hiring is contingent on eligibility to work in the United States.

Job Description Test Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • 2+ years of experience in a similar or related role SUMMARY OF POSITION The Test Engineer is responsible for developing and executing tests to ensure that product quality and reliability meet customer requirements. This role involves collaborating with cross-functional teams to identify testing needs, create test procedures, and analyze results. The Test Engineer will also engage in troubleshooting and problem-solving to ensure product performance. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Prepare and review acceptance and qualification test procedures and corresponding reports for complex aerospace hardware, • Oversee and execute hardware testing, • Analyze test results and ensure compliance with customer requirements, • Install and troubleshoot testing equipment, • Travel as needed to test labs to support testing, • Improve data acquisition system software and hardware, • Assist in the maintenance of test lab equipment, • Maintain database of instrumentation used in the test department, • Research new instrumentation and testing methodologies, • Review calibration of test instruments to verify compliance with quality assurance and customer requirements, • Support disposition of technical issues which occur during manufacturing, • Support customer reviews and inbound requests QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Strong understanding of testing methodologies and best practices, • Expertise in instrumentation and data acquisition, • Knowledge of analog and digital test equipment, • Knowledge of data acquisition software such as LabVIEW, • Knowledge of data processing techniques, Excel preferred, • Knowledge of relevant MIL-STD’s, • Familiarity with 3D modeling and CAD software, • Familiarity with heat and mass transfer, fluid mechanics, thermodynamics, and structural mechanics, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $80,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Water Treatment Chemical Service Technician—New York City. 2025 was a Record Sales Year. And 2026 is off to a great start. Garratt-Callahan is family friendly, profitable, stable, and fiercely private. No layoffs in 120 years. No ownership changes in 120 years. 75 straight years of profitability. We have operations from Asia to the Caribbean, and in every state in the USA. Technical Sales Support Service Technicians are responsible for maintaining the existing customers in New York City. The best place to live is in or very near New York City. Perform water treatment tests at the existing customers. With the freedom of working from your home, you can work and train in a territory alongside veteran Territory Managers. The career track for a Technical Sales Support/Service Technician is to train to become a Territory Manager. Territory Managers are eligible for unlimited commission and a year-end bonus. As a Technical Sales Support/Service Technician, you will receive an industry competitive salary, expenses, benefits, and a $675 per month car allowance. In addition, ample technical support is provided along with continuous training. Paperwork is kept to a minimum. Compensation is based upon experience and the ability to succeed. $80,000 to $100,000 first year base for a qualified candidate. We hire with a focus that favors the committed employee both in terms of overall compensation and growth opportunities. We have designed our compensation package accordingly. Available Benefit Package includes a corporate 401k, health, dental, vision, and life insurance. Job Responsibilities: • Solve customers' water problems., • Treat industrial boilers and cooling towers to keep them energy efficient and environmentally friendly., • Perform detailed water testing & analyses at industrial sites such as commercial buildings, food processing plants, hospitals, manufacturing plants, government Buildings, and military bases., • Help sell Garratt-Callahan's proprietary chemical blends, equipment, & monitoring technology., • Help sell corrosion & scale inhibitors, coagulants, flocculants, biocides, bio-augmentation, feed & monitoring equipment, water management plans, reverse osmosis products., • Help sell Water Safety Programs., • Keep our existing customers happy. Garratt-Callahan is a US based private 120-year-old, nationwide water treatment chemical company. Garratt-Callahan treats industrial boilers and cooling towers to keep them energy efficient and environmentally friendly with one of the most advanced product lines in the industry. We are registered to ISO 9001:2015 and sell an industry leading line of “green" solutions, G-C GreenTech. We are headquartered in Burlingame, California. G-C is family owned, profitable, and expanding. We have five chemical plants in the USA, technical salespeople in every state, and operations in Asia, the Pacific, and the Caribbean. Benefits: • We offer a competitive benefit package which includes medical, dental, vision, AD&D, LT, and 401k. A monthly car allowance and travel expenses are provided., • First year compensation is $80,000 to $100,000 depending on experience., • Advanced training, and a clear career path., • Family friendly, flexible hours., • A huge benefit of working for Garratt-Callahan is our stability and low turnover., • No Layoffs in our 120-year history, • G-C is a profitable company. The last year that G-C did not turn a profit was during World War 2., • 2025 was a record sales year, and 2026 sales are off to a great start. To Apply, please log on to: Thank you for considering Garratt-Callahan Company. Garratt-Callahan is an EEO/AAE employer. Minorities, women, veterans and individuals with disabilities are encouraged to apply. NOTE: Garratt-Callahan does not sponsor work visas. No recruiters please. Requirements: You will be a successful applicant if you have a technical degree such as Chemistry, Chemical Engineering, Biology, Mechanical Engineering, Environmental Science, Paper Science, or Water Resources. You must have a 4-year science degree to qualify for this position. You must be a capable Chemist. One-year technical sales, or an internship related to water treatment chemicals is preferred, but we are willing to train and mentor. Outside industrial sales experience is a plus. You must live in this New York territory, anywhere within the Five Boroughs is best, and be familiar with the industrial marketplace of NYC. If you have a disability, and need assistance during the application and selection process as a result, please contact the Garratt-Callahan Human Resources department at 650.697.5811. Arrangements can be made to provide an accommodation in order to assist you in applying for an open position using our on-line system, completing any other related paperwork, interviewing, or any other portion of the employment process. When requesting an accommodation, please provide your name, phone, email address, or any other means of contacting you. Provide a brief description of the nature of the requested accommodation. A member of the Human Resources team will then contact you to discuss your request. A request for an accommodation will not affect your opportunities for employment with Garratt-Callahan. Garratt-Callahan values differing experiences, backgrounds and perspectives among our employees, and see them as a competitive advantage. Garratt-Callahan is committed to the fair and equal treatment of all associates and applicants. Garratt-Callahan is an equal opportunity employer that evaluates qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Key Words: Chemistry, chemicals, scientific, science, salesperson, salesman, saleswoman, outside sales, technical sales, account representative, account executive, territory sales, territory manager, district sales, district manager, field engineer, field service, AE, sales engineer, data center, chemical engineer, chemist, mechanical engineer, biologist, biology, microbiology, nalco, ecolab, Suez, chemtreat, veolia, solenis, chem-aqua, kurita, evoqua, fremont, Barclay, water treatment, boilers, cooling towers, waste water, pumps, equipment, chillers, polymers, biocides, New York City, NYC, The Bronx, Brooklyn, Manhattan, Queens, Staten Island.

Job DescriptionABM (NYSE: ABM) is a leading provider of facility solutions with revenues of approximately $6.4 billion and over 130,000 employees in 300+ offices deployed throughout the United States and various international locations. ABM’s comprehensive capabilities include electrical & lighting, energy solutions, facilities engineering, HVAC & mechanical, janitorial, landscape & turf, mission critical solutions and parking, provided through stand-alone or integrated solutions. Founded in 1909, ABM provides custom facility solutions in urban, suburban and rural areas to properties of all sizes — from schools and commercial buildings to hospitals, data centers, manufacturing plants and airports. Pay: $56.30 The pay listed is the salary range for this position. Any specific offer will vary based on the successful applicant’s education, experience, skills, abilities, geographic location, and alignment with market data.You may be eligible to participate in a Company incentive or bonus program. Benefit Information:ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit ABM ABM Employee Benefits \u007C Front Line Team Members \u007C ABM Employee Benefits \u007C Front Line Team Members \u007C (Programa de Beneficios de ABM) 401(k) – You become eligible to make personal contributions beginning the first of the month following 30 days of employment. You become eligible for the ABM match beginning the first of the month following six months of employment. ABM matches your pre-tax and/or Roth contributions, dollar for dollar, for the first 3%. For the next 2%, ABM contributes $0.50 for each dollar you contribute. Your contributions and match are immediately vested. Essential Functions Responsible for the day-to-day management of the local workforce to include Mechanical and Technical operations in a commercial facility. Implement client objectives. Support energy initiatives Ensure consistent reporting. Ensure Able/ABM Engineering operational standards are implemented. Ensure Able/ABM Engineering Services’ Safety Programs are implemented. Training - safety, procedural and technical for area employees. Provide supervision over company directed QA program. Provide supervision over company directed safety program. Auditing/benchmarking of job sites and employee processes. Develop and implement company and job site standards. Oversee scheduling of job site supervisors and employees. Facilitate accurate AES billing and accounting. Facilitate the development of budgets as required. Assist in the development of new business to include participation in marketing, sales and local BOMA/IFMA events. Review, support, and comment on monthly chief engineer reports Review and comment on facility energy use. Assist in the management of overtime and client overtime expectations. Provide leadership to Able/ABM Engineering Services’ employees. Facilitate career growth and opportunities to all employees. Ability to work with and understand union contracts. Ability to work with and understand non-union employment rules. Minimum Requirements: A minimum of five (2) years' experience in the field and prior management experience is required. Must have knowledge of MS Office Applications including Word, Excel, Outlook and PowerPoint. Must have excellent verbal and written communication skills. Able to work well in a customer focused team environment. Excellent customer service, employee relations and good tenant/customer interaction skills. Proven ability to work with a variety of staff and management. Ability to create processes and ensure they are followed by engineering teams. Please note this job description is not designed to cover or contain a comprehensive listing of duties that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. ABM offers a comprehensive benefits package including health insurance (medical, dental and vision), 401(k) plan with immediate vesting, short and long-term disability, PTO, paid holidays and more. ABM values the rich diversity of its workforce. We strive to foster a work environment of respect and engagement that harnesses our workforce’s diversity to our common goal of providing prompt and superior client service. ABM participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Este empleador participa en E-Verify y proporcionará al gobierno federal la información de su Formulario I-9 para confirmar que usted está autorizado para trabajar en los Estados Unidos. ABM is an EOE (Minority / Female / Veteran / Disability / Gender Identity / Sexual Orientation) and is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. -ABM does not sell or share your personal information.•We collect basic personal details like your name and address, work history, and other employment related personal information. We also collect Sensitive Personal Information like race/ethnicity because we are required to do so by law.•We collect this information in order to process your employment with us.•We will keep your information for as long as is required by law. Prior to the submission of your personal information, please review our Employee Privacy Notice. If you are from California, please review our California Employee Privacy Notice. #200 We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Electrical Engineer Ensign Engineering, P.C., is a NYC consulting engineering firm located in the Bronx. We have been in business for 25 years and have an extensive list of repeat clients. We have an immediate need for electrical engineers with experience in the design of electrical systems including new services, distribution, lighting and lighting controls, fire alarm, and low voltage systems for commercial and institutional facilities. Responsibilities will include field investigation, analysis, design, production of contract documents, and construction administration services. The candidate shall have the capability of working on multiple projects and must have good communications skills to relate to clients, other design professionals, contractors, vendors and his/her peers. • Candidates should possess a bachelor’s level degree in engineering or science, • Must have at least 3 years of experience working for a U.S. MEP consulting engineering firm or Architect/Engineering firm, • EIT Preferred, PE a plus, • Working knowledge of AutoCAD required, • Familiarity with National Electric Code and NYC codes, • LEED Accreditation a plus Company DescriptionENSIGN ENGINEERING, P.C., is a leading Bronx based multi-discipline engineering firm, whose principals and associates provide consulting and design expertise in engineering and construction management. We are hands-on engineers, with principals intimately involved in each phase of a project from initial planning to final commissioning. ENSIGN ENGINEERING, P.C established in 1993, is certified with the Federal Government as a Veteran Owned Small Business (VOSB) as well as a WBE/DBE by most New York State and City agencies including, New York City DDC, NYS DOT, NYC School Construction Authority and the Port Authority of New York & New Jersey. ENSIGN ENGINEERING, P.C.'s mission is to provide first-rate civil, structural, mechanical, plumbing and electrical consulting engineering services on public, private, institutional, industrial and commercial projects. The company's principal officers are: Regina Gallagher Marengo, P.E.\t\t\tPresident Civil Engineer Depending upon the scope of a project, ENSIGN ENGINEERING, P.C. is readily able to retain and manage a team of highly experienced designers, engineers and inspectors. Our location in the New York metropolitan area gives us ready access to an extensive pool of experienced professionals. The goal of ENSIGN ENGINEERING, P.C. is to deliver projects on time, within budget, properly designed, and in complete compliance with the Client's scope of project. Areas of engineering expertise include the following: • MEP Design and Construction Management, • Existing MEP Condition Surveys and Analysis, • Energy Audits per LL84 & LL87, • Electric service, distribution, power and lighting, • Fire detection, alarm, telecom, security, • Fire suppression, sprinkler and standpipe, • Civil and Site Engineering, • Water Supply and Distribution, • Storm Water Management, • Traffic Studies and Analysis, • CommissioningENSIGN ENGINEERING, P.C., is a leading Bronx based multi-discipline engineering firm, whose principals and associates provide consulting and design expertise in engineering and construction management. We are hands-on engineers, with principals intimately involved in each phase of a project from initial planning to final commissioning.\r\n\r\nENSIGN ENGINEERING, P.C established in 1993, is certified with the Federal Government as a Veteran Owned Small Business (VOSB) as well as a WBE/DBE by most New York State and City agencies including, New York City DDC, NYS DOT, NYC School Construction Authority and the Port Authority of New York & New Jersey. \r\n\r\nENSIGN ENGINEERING, P.C.'s mission is to provide first-rate civil, structural, mechanical, plumbing and electrical consulting engineering services on public, private, institutional, industrial and commercial projects. The company's principal officers are:\r\n\r\nRegina Gallagher Marengo, P.E.\t\t\tPresident\r\nCivil Engineer\r\n\r\n\tDepending upon the scope of a project, ENSIGN ENGINEERING, P.C. is readily able to retain and manage a team of highly experienced designers, engineers and inspectors. Our location in the New York metropolitan area gives us ready access to an extensive pool of experienced professionals. \r\n\r\n\tThe goal of ENSIGN ENGINEERING, P.C. is to deliver projects on time, within budget, properly designed, and in complete compliance with the Client's scope of project. Areas of engineering expertise include the following:\r\n\r\n- MEP Design and Construction Management \r\n- Existing MEP Condition Surveys and Analysis\r\n- Energy Audits per LL84 & LL87 \r\n- Electric service, distribution, power and lighting\r\n- Fire detection, alarm, telecom, security\r\n- Fire suppression, sprinkler and standpipe\r\n- Civil and Site Engineering\r\n- Water Supply and Distribution\r\n- Storm Water Management\r\n- Traffic Studies and Analysis\r\n- Commissioning

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at . What You'll Do: We are seeking a highly skilled Senior Data Center Mechanical Engineer to support the design and delivery of our growing data center portfolio. This role requires strong technical expertise to develop and implement innovative mechanical solutions, such as advanced chilled-water systems, liquid cooling, and optimized airflow strategies, while ensuring consistency, scalability, and efficiency across projects. The Senior Data Center Mechanical Engineer will serve as a subject matter expert, partnering with internal teams and external consultants to deliver cutting-edge, reliable facilities at scale. Travel will be required to various data center sites. About the role: • Act as a subject matter expert on mechanical design for assigned projects, ensuring alignment with the company's Basis of Design, standards, and long-term portfolio goals., • Manage the mechanical design process, coordinating consultants, vendors, and internal stakeholders to ensure schedules, budgets, and quality requirements are met., • Review design drawings, specifications, and shop drawings, providing technical direction and ensuring compliance with owner requirements., • Shape the long-term cooling strategy by evaluating emerging technologies (e.g., liquid cooling, advanced economizer designs, high-density airflow solutions) and recommending integration paths that support the portfolio's future growth and efficiency goals., • Support commissioning and site activities by validating that systems meet design intent and operational requirements., • Demonstrated ability to apply innovative approaches to cooling and efficiency challenges., • Collaborate closely with IT, operations, and project management teams to deliver integrated, future-ready infrastructure., • Bachelor's degree in mechanical engineering. Professional Engineering license preferred., • 5+ years of mechanical design experience in data centers or mission-critical facilities., • Strong knowledge of chilled-water and air-cooled systems, liquid cooling solutions, and redundant piping configurations., • Familiarity with controls/BAS systems and the ability to develop sequences of operation., • Experience with computational fluid dynamics (CFD) modeling and energy analysis preferred., • Demonstrated ability to apply innovative approaches to cooling and efficiency challenges., • Strong problem-solving, analytical, and communication skills. At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $122,000 to $179,000. The starting salary will be determined based on job-related knowledge, skills, experience, and market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Ensign Engineering, P.C. (EEPC) located in the Bronx, NY is a WBE/VOSB engineering & architectural design and construction management firm. Established in 1993, EEPC’s experience includes MEP engineering projects in schools, hospitals, Police Stations, restaurants, and airports. We are experts in delivering creative solutions in designs, system procurement, commissioning, project management and owner’s representation. Our portfolio is large and our reputation is unmatched working in NYC with various architects and agencies. Ensign is a great place to work featuring challenging technical assignments, competitive salaries and the opportunity for career growth. We are expanding our Electrical Engineering Practice and seeking an experienced (5-7 years) engineer familiar with current NYC Electrical and Fire Code, NYC Building and Energy Conservation Codes, and NFPA standards. Qualifications include Electrical Engineering degree, CAD capable and experience designing power and lighting, fire alarm and low voltage systems. The successful candidate will have excellent communication and technical writing skills, be self-motivated, experienced coordinating with HVAC, Plumbing, and Fire Protection engineers and designers. A NYS PE license is preferred. Company DescriptionENSIGN ENGINEERING, P.C., is a leading Bronx based multi-discipline engineering firm, whose principals and associates provide consulting and design expertise in engineering and construction management. We are hands-on engineers, with principals intimately involved in each phase of a project from initial planning to final commissioning. ENSIGN ENGINEERING, P.C established in 1993, is certified with the Federal Government as a Veteran Owned Small Business (VOSB) as well as a WBE/DBE by most New York State and City agencies including, New York City DDC, NYS DOT, NYC School Construction Authority and the Port Authority of New York & New Jersey. ENSIGN ENGINEERING, P.C.'s mission is to provide first-rate civil, structural, mechanical, plumbing and electrical consulting engineering services on public, private, institutional, industrial and commercial projects. The company's principal officers are: Regina Gallagher Marengo, P.E.\t\t\tPresident Civil Engineer Depending upon the scope of a project, ENSIGN ENGINEERING, P.C. is readily able to retain and manage a team of highly experienced designers, engineers and inspectors. Our location in the New York metropolitan area gives us ready access to an extensive pool of experienced professionals. The goal of ENSIGN ENGINEERING, P.C. is to deliver projects on time, within budget, properly designed, and in complete compliance with the Client's scope of project. Areas of engineering expertise include the following: • MEP Design and Construction Management, • Existing MEP Condition Surveys and Analysis, • Energy Audits per LL84 & LL87, • Electric service, distribution, power and lighting, • Fire detection, alarm, telecom, security, • Fire suppression, sprinkler and standpipe, • Civil and Site Engineering, • Water Supply and Distribution, • Storm Water Management, • Traffic Studies and Analysis, • CommissioningENSIGN ENGINEERING, P.C., is a leading Bronx based multi-discipline engineering firm, whose principals and associates provide consulting and design expertise in engineering and construction management. We are hands-on engineers, with principals intimately involved in each phase of a project from initial planning to final commissioning.\r\n\r\nENSIGN ENGINEERING, P.C established in 1993, is certified with the Federal Government as a Veteran Owned Small Business (VOSB) as well as a WBE/DBE by most New York State and City agencies including, New York City DDC, NYS DOT, NYC School Construction Authority and the Port Authority of New York & New Jersey. \r\n\r\nENSIGN ENGINEERING, P.C.'s mission is to provide first-rate civil, structural, mechanical, plumbing and electrical consulting engineering services on public, private, institutional, industrial and commercial projects. The company's principal officers are:\r\n\r\nRegina Gallagher Marengo, P.E.\t\t\tPresident\r\nCivil Engineer\r\n\r\n\tDepending upon the scope of a project, ENSIGN ENGINEERING, P.C. is readily able to retain and manage a team of highly experienced designers, engineers and inspectors. Our location in the New York metropolitan area gives us ready access to an extensive pool of experienced professionals. \r\n\r\n\tThe goal of ENSIGN ENGINEERING, P.C. is to deliver projects on time, within budget, properly designed, and in complete compliance with the Client's scope of project. Areas of engineering expertise include the following:\r\n\r\n- MEP Design and Construction Management \r\n- Existing MEP Condition Surveys and Analysis\r\n- Energy Audits per LL84 & LL87 \r\n- Electric service, distribution, power and lighting\r\n- Fire detection, alarm, telecom, security\r\n- Fire suppression, sprinkler and standpipe\r\n- Civil and Site Engineering\r\n- Water Supply and Distribution\r\n- Storm Water Management\r\n- Traffic Studies and Analysis\r\n- Commissioning

Job Description Senior Structural Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • Master’s degree preferred, • 5+ years of experience in a similar role SUMMARY OF POSITION The Senior Structural Engineer is responsible for leading intricate analyses to ensure our products will meet customer requirements. This role requires rigorous application of structural mechanics while adhering to manufacturing, testing, and quality best practices. The Senior Structural Engineer will engage in problem-solving daily and regularly present results to internal and external stakeholders. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform critical thermomechanical analyses of complex aerospace hardware through commercial analysis packages and hand calculations, working closely with the design team to rapidly iterate on new product development, • Peer review analyses produced by other structures engineers and subcontractors, • Liaise with customer on heat exchanger requirements, • Generate technical reviews, reports, and other engineering documentation, • Champion process improvement activities related to structural analysis, • Review and approve design changes and test procedures, • Support disposition of technical issues which occur during manufacturing, • Support customer reviews and inbound requests, • Support proposals and future product development QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Extensive experience performing structural analysis for mechanical components (aerospace preferred), • Expertise in commercial FEA software packages, • Expertise in material properties and selection process, • Knowledge of design principles, manufacturing processes, and assembly techniques, • Knowledge of 3D modeling and CAD software, • Knowledge of heat and mass transfer, fluid mechanics, and thermodynamics, • Knowledge of drawing ANSI standards and GD&T procedures, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $105,000 to $150,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Lead Design Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • 8+ years of progressive engineering experience SUMMARY OF POSITION The Lead Design Engineer is responsible for overseeing the design and development of complex mechanical parts and assemblies. This role focuses on leading technical decision-making, ensuring design integrity, and driving innovation across projects. The Lead Design Engineer will play a key role in cross-functional collaboration, mentoring, and continuous improvement initiatives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Lead the development of 3D models of complex aerospace hardware, • Prepare design concepts, sketches, layouts, technical drawings, and BOMs, • Serve as the primary technical point of contact for design-related decisions across new and existing products, • Interface with internal and external stakeholders to ensure manufacturability, • Certify technical reviews and other engineering documentation, • Lead cross-functional activities to sustain existing designs, • Manage complete implementation of engineering design change requests, • Lead resolution of technical issues during manufacturing and customer interactions, • Champion process improvement activities related to design engineering, • Support proposals and future product development QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Extensive experience as a Senior Mechanical Design Engineer, Technical Lead, or similar role, • Expertise in parametric CAD design, • Expertise in drawing ANSI standards and GD&T procedures, • Expertise in manufacturing techniques and processes, • Knowledge of material properties and selection process, • Knowledge of FMEAs and quality assurance processes, • Knowledge of relevant MIL-STD’s, • Familiarity with heat and mass transfer, fluid mechanics, thermodynamics, and structural mechanics, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $160,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description INTRODUCTION BRAVO is the partnering of Velocity Architectural and Engineering Services and Bradford Construction Corporation (WBE). The cooperative brings together some of the industry's most distinguished leaders and technical experts, united by their decades of experience modernizing vital infrastructure and iconic facilities throughout the New York metropolitan area. BRAVO delivers value to its clients by offering the full-breadth of architectural, engineering, and construction management services through an efficient organization that is structured to promote attentive client service, responsive project delivery, and quality. Through our offices in New York City and Newark, NJ, BRAVO's family of companies serve public and private clients covering a wide-range of markets, including education, government, transportation, healthcare, industrial, power, and water. WHY BRAVO? At BRAVO, you will find a wealth of opportunities to create the career you've always imagined. We support, encourage, and empower our people by providing an environment where everyone has an opportunity to succeed. BRAVO brings amazing people together to make amazing things happen. We're a diverse collective of thinkers and doers, committed to remaining client-focused, agile, responsive, and accountable to our valued clients and the communities we serve. BRAVO offers excellent benefits including: • MEDICAL, DENTAL AND VISION INSURANCE, • 401(k) WITH MATCH, • ACCIDENT INSURANCE, • LIFE INSURANCE, • REIMBURSEMENT OF PROFESSIONAL LICENSES AND MEMBERSHIPS, • SHORT TERM DISABILITY, • COMMUTER BENEFITS Job Type: Full Time; Onsite, Monday-Friday (8:30AM-5:15PM) Job Description: Velocity Architecture & Engineering DPC, a company of BRAVO Group, has an opening for an experienced Plumbing and Fire Protection Engineer to contribute to public sector Roles & Responsibilities: • Develop plumbing and fire protection specifications, system narratives, and system layouts for a variety of project types and sizes, with a focus on education and transit sectors., • Establishes system application, design criteria, and operational parameters independently, ensuring compliance with applicable codes and performance standards., • Performs hydraulic calculations; sizes and selects fire protection equipment; and layouts sprinkler and standpipe systems., • Performs storm, hot water, domestic water, and gas load calculations; sizes and selects plumbing equipment; and layouts plumbing systems., • Leads coordination of plumbing and fire protection systems within multidisciplinary teams to ensure fully integrated design solutions., • Participates in and supports the QA/QC process through technical review of drawings, calculations, and specifications prior to submission., • Performs construction administration and field investigation tasks for assigned projects, including site visits, responding to RFIs, reviewing submittals, and preparing detailed field reports. Minimum Requirements: • Professional Engineer (PE) registration in New York, • At least ten (10) years of experience within a consulting or design-build firm, • Knowledge of New York State and New York City building codes, and NFPA standards., • Ability to think critically and assess each project, including staff allocation, independently with only high-level guidance from senior leadership., • Strong written and verbal communication skills., • Latest AutoCAD experience required, REVIT experience a plus., • Capable of using standard Microsoft Office software such as Outlook, Word, Excel, etc.

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Ensign Engineering, P.C. (EEPC) located in the Bronx, NY is a WBE/VOSB engineering & architectural design and construction management firm. Established in 1993, EEPC’s experience includes MEP engineering projects in schools, hospitals, Police Stations, restaurants, and airports. We are experts in delivering creative solutions in designs, system procurement, commissioning, project management and owner’s representation. Our portfolio is Large and our reputation is unmatched working in NYC with various architects and agencies. Ensign is a great place to work featuring challenging technical assignments, competitive salaries and the opportunity for career growth. We are expanding our CM Practice and seeking experienced (5-10 years) Construction Professionals. Candidates will have minimum of ten years of construction related experience with specific experience in one or more building trades including electrical systems, signals, mechanical, and plumbing. Candidate must have excellent communication, technical writing and team support skills as well as familiarity with state construction and fire codes and Construction methods. This is a growth opportunity for the right professional. Candidate must be a self and highly motivated hands on constriction pro capable of evaluating existing conditions, report on findings and able to recommend solutions. Salary is based upon candidate’s qualifications and experience. Please submit your resume along with a cover letter detailing why you think you are the best candidate for this position. Qualifications include: · Minimum of two year degree in Electrical Engineering, Electrical Engineering Technology or equivalent experience such as serving a full apprenticeship and recognition as a journeyman/tradesman · NYC construction experience on Transit, Signals, Medium and Low Voltage systems. · A demonstrated capability for written and oral communication. · OSHA 10 Hour Construction Safety Course Certification. · Must have a valid driver license and clean MVR. Company DescriptionENSIGN ENGINEERING, P.C., is a leading Bronx based multi-discipline engineering firm, whose principals and associates provide consulting and design expertise in engineering and construction management. We are hands-on engineers, with principals intimately involved in each phase of a project from initial planning to final commissioning. ENSIGN ENGINEERING, P.C established in 1993, is certified with the Federal Government as a Veteran Owned Small Business (VOSB) as well as a WBE/DBE by most New York State and City agencies including, New York City DDC, NYS DOT, NYC School Construction Authority and the Port Authority of New York & New Jersey. ENSIGN ENGINEERING, P.C.'s mission is to provide first-rate civil, structural, mechanical, plumbing and electrical consulting engineering services on public, private, institutional, industrial and commercial projects. The company's principal officers are: Regina Gallagher Marengo, P.E.\t\t\tPresident Civil Engineer Depending upon the scope of a project, ENSIGN ENGINEERING, P.C. is readily able to retain and manage a team of highly experienced designers, engineers and inspectors. Our location in the New York metropolitan area gives us ready access to an extensive pool of experienced professionals. The goal of ENSIGN ENGINEERING, P.C. is to deliver projects on time, within budget, properly designed, and in complete compliance with the Client's scope of project. Areas of engineering expertise include the following: • MEP Design and Construction Management, • Existing MEP Condition Surveys and Analysis, • Energy Audits per LL84 & LL87, • Electric service, distribution, power and lighting, • Fire detection, alarm, telecom, security, • Fire suppression, sprinkler and standpipe, • Civil and Site Engineering, • Water Supply and Distribution, • Storm Water Management, • Traffic Studies and Analysis, • CommissioningENSIGN ENGINEERING, P.C., is a leading Bronx based multi-discipline engineering firm, whose principals and associates provide consulting and design expertise in engineering and construction management. We are hands-on engineers, with principals intimately involved in each phase of a project from initial planning to final commissioning.\r\n\r\nENSIGN ENGINEERING, P.C established in 1993, is certified with the Federal Government as a Veteran Owned Small Business (VOSB) as well as a WBE/DBE by most New York State and City agencies including, New York City DDC, NYS DOT, NYC School Construction Authority and the Port Authority of New York & New Jersey. \r\n\r\nENSIGN ENGINEERING, P.C.'s mission is to provide first-rate civil, structural, mechanical, plumbing and electrical consulting engineering services on public, private, institutional, industrial and commercial projects. The company's principal officers are:\r\n\r\nRegina Gallagher Marengo, P.E.\t\t\tPresident\r\nCivil Engineer\r\n\r\n\tDepending upon the scope of a project, ENSIGN ENGINEERING, P.C. is readily able to retain and manage a team of highly experienced designers, engineers and inspectors. Our location in the New York metropolitan area gives us ready access to an extensive pool of experienced professionals. \r\n\r\n\tThe goal of ENSIGN ENGINEERING, P.C. is to deliver projects on time, within budget, properly designed, and in complete compliance with the Client's scope of project. Areas of engineering expertise include the following:\r\n\r\n- MEP Design and Construction Management \r\n- Existing MEP Condition Surveys and Analysis\r\n- Energy Audits per LL84 & LL87 \r\n- Electric service, distribution, power and lighting\r\n- Fire detection, alarm, telecom, security\r\n- Fire suppression, sprinkler and standpipe\r\n- Civil and Site Engineering\r\n- Water Supply and Distribution\r\n- Storm Water Management\r\n- Traffic Studies and Analysis\r\n- Commissioning

Job DescriptionJoin the team at New Jersey’s largest wine and spirits distributor! At Allied Beverage Group, we’re proud of our dynamic, family-based culture and our role in keeping the beverage industry moving. If you're looking for a great company with great people—this is the place to be! Overview The Asst. Manager is a key leader position in the distribution and operations organization reporting directly to the Night Manager. Requires strong interpersonal and communication skills as well as knowledge of warehouse operations to include inventory control, shipping and receiving operations in a Direct Sales organization. Preference for warehouse automation experience and union environment is a plus but not required. Asst. Manager directs the night to night aspects of operations, ensuring the highest level of customer service from the warehouse to customers while improving productivity through continuous improvement in fill rate, throughput and cost. Responsibilities Planning:- Ability to identify and plan for staffing requirements based on knowledge of warehousing and distribution operations.- Has the ability to make decisions based on experience in shipping, receiving and inventory control.- Ensures that procedures and processes match requirements of the operation.- Capability to train and implement new technology and processes while maintaining productivity.Building an Inclusive Culture:- Individual and collective accountability, reward and recognition programs, communication designed to develop the frontline employees and build a desirable place to work.Continuous Improvement:- Development and Implementation with the management team and frontline of correct standard operating procedures and performance-based metrics in order to drive results through continuous improvement programs such as lean six sigmaCollaboration:- Partnering with Night and Day operation manager, delivery and Maintenance functions to identify areas of opportunities for improvements to fill rate, throughput, and reduction of cost.Safety:- Direct programs to ensure the safety of all personnel, equipment and property.- Provide safety instruction to personnel as needed. - Report all work-related injuries immediately.- Provide immediate medical attention to injured employees as necessary.- Ensure compliance with appropriate government regulations. Qualifications • Bachelor’s Degree ( Logistics management, Mechanical engineer, or Business Management, • 5-7 years of supervision level experience within a distribution warehouse, • Operational supervision experience, • Distribution of product experience, • Preferred warehouse automation experience, • Functional system understanding in WMS, Microsoft Office, Excel, PowerPoint; strong communication skills The Company is dedicated to ensuring a safe and secure environment for our team members and visitors. To assist in achieving that goal, we conduct a drug and background check for all new team members post-offer and prior to the start of employment. The Immigration Reform and Control Act requires that verification of employment eligibility be documented for all new employees by the end of the third day of work. Allied Beverage Group participates in the E-Verify program to confirm employment eligibility of all new hires in the United States. EEO and AI Disclosure Statement Allied Beverage Group is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, genetic information, or any other legally protected characteristics. As part of our recruitment process, Allied Beverage Group uses artificial intelligence (AI) tools to support the initial review of applications. These tools are designed to assist our recruiters in identifying qualifications and experience that align with the requirements of each role. The tools do not make hiring decisions. All final decisions are made by our recruitment team and hiring managers. We are committed to fair and equitable hiring practices. If you have questions about this process or need an accommodation, please contact Human Resources. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

If Bike: Have a government-issued ID.

If Bike: Have a government-issued ID.

If Bike: Have a government-issued ID.

If Bike: Have a government-issued ID.

If Bike: Have a government-issued ID.

If Bike: Have a government-issued ID.

If Bike: Have a government-issued ID.

If Bike: Have a government-issued ID.

If Bike: Have a government-issued ID.

If Bike: Have a government-issued ID.

If Bike: Have a government-issued ID.

If Bike: Have a government-issued ID.

If Bike: Have a government-issued ID.

If Bike: Have a government-issued ID.