Nec jobs in New York, New YorkCreate job alerts

Job DescriptionNEW YORK METRO AREA Established in 1978, Digital Media Systems, Inc. (DMS) is a recognized leader providing best-in-class audiovisual solutions to the motion picture, post-production, distribution, and broadcast fields. Position OverviewThe commercial Cinema Technician is a full-time position that directly supports our efforts to provide world-class service to our wide range of clients, including commercial and independent theater owners, private and corporate screening rooms, post-production facilities, universities, museums, and more. With a focus on cinema, you’ll work with a passionate and talented group of field technicians and installers to take commercial AV projects from concept to creation, and subsequently operate and maintain those systems, once in place. This is a permanent, full-time, benefited position. Job Responsibilities • Identify and diagnose audiovisual presentation issues and equipment failures., • Provide remote and onsite support/troubleshooting assistance and guide non-technical theater and venue staff, communicating step-by-step instructions in understandable terms., • Complete routine and emergency onsite equipment service and preventative maintenance, including but not limited to equipment installation, consumable and part replacement, deep cleaning of projection system and optics, and device firmware updates and backups., • Perform routine calibration of video/imaging and audio equipment, including but not limited to image luminance/color calibration, image geometry/focus adjustment, graphic equalization, synchronization, and SPL measurement of audio channels., • Ensure the highest industry presentation quality standards are met at high profile film premieres, screenings, and other special events., • Daily travel throughout the New York metro area and occasionally out of town/out of state.Mandatory Qualifications, • Read, interpret, diagnose and affect repair of semi complex electronic equipment, e.g. printed circuit boards, power supplies, multiplexing systems, amplifiers, etc., • Provide technical guidance and training for above to other technicians., • Printed Circuit Board (PCB) / Electronics Repair SkillsMinimum Qualifications, • 3+ years’ experience operating/servicing professional audiovisual equipment., • Comprehension of AV system schematics, signal flow, and modern audio and video formats., • Experience with AV and electrical test equipment, including but not limited to: light meters, colorimeters/spectroradiometers, oscilloscopes, real-time analyzers (RTA), SPL meters, signal generators, and multimeters., • Demonstrate modern computing skills, including experience with Windows and macOS, and competencies in word processing, spreadsheets, data entry, and research., • Experience configuring and troubleshooting basic wired and wireless networks., • Excellent verbal and written communication skills., • Ability to work diligently, calmly, and professionally, under tight run-of-show deadlines., • Valid driver’s license and reliable transportation., • Flexibility in scheduling with a willingness to work nights, weekends, and holidays (paid) depending on business needs., • Ability to engage in physical activity, including lifting (up to 50lbs), standing for long periods, walking up and down stairs, and climbing ladders/scaffolding., • Must be authorized to work in the United States.Preferred Qualifications, • Knowledge and proficiency with commercial Digital Cinema equipment, including Christie, Barco, NEC, Sony, Dolby/Doremi, GDC, QSC/USL, etc., • Experience with DSP systems, audio over IP, and other distributed audio systems such as Q-SYS/Q-LAN, AES67, Dante, etc., • Understanding of control systems, such as Q-SYS, Crestron, Extron, AMX, etc, and third-party control methods and equipment such as electrical relays/switches, contact closure, GPIO, and TCP/UDP IP control., • Experience with commercial digital signage systems and LED walls., • Ability to solder and terminate cables and connectors., • CTS and related professional certifications.We Offer, • Starting salary: $70,000-$95,000+/year, commensurate with experience., • Additional compensation: annual bonus based on performance., • Benefits: Health insurance, 401K, PTO in addition to sick days and paid holidays., • 401(k), • Bonus based on performance, • Health insurance, • Opportunity for advancement, • Paid time off Digital Media Systems, Inc. is an equal opportunity employer. We value diversity and encourage applications from all qualified candidates. Only shortlisted candidates will be contacted for interviews. Join us to lead with impact and help shape the future of Digital Media Systems, Inc. About Us Digital Media Systems, Inc. is a leading provider of audio-visual solutions for the motion picture industry. We have represented the high-profile interests of Hollywood film studios, postproduction, and cinema exhibition facilities, as well as industry defining product manufacturers. Our goal is to provide superior products, technologies, support, and services to the entertainment industry in an efficient and comprehensive manor. Visit us at for more information about our company and offerings.

Job DescriptionDescription: Position Summary: To maintain factory equipment and machinery based on input from department supervisors, technicians, engineers, and maintenance managers. This includes installing and maintain standard and custom equipment and machines as required to specification. Job Elements or Tasks: • Perform PLC implementation and programming, • Perform regularly scheduled backups of all PLC programs, • Create and back-up all ladder logic diagrams and drawings required for production equipment, • Maintain Electro-Pneumatic controls, fluid power transmissions, and hydraulics, • Ensure work is in compliance with all OSHA and NEC regulatory policies and procedures, • Specify and identify materials and other items required to perform the job, • Complete jobs within a specified time frame · Assist in project management, • Maintain work area to ensure it is safe, clean, and efficient · Maintain spare parts inventory in main location and satellites, • Participates in cross-training efforts, • Keep accurate records of all jobs worked, • Must be available for emergency callouts 24/7, • Perform other maintenance duties and activities as required, • Perform all daily maintenance functions and 5S requirements (i.e. clean and sweep area), • Enter data in Upkeep and Synerion, and close work orders as required, • A high level of engineering principles theory and knowledge, equivalent to a 4-year technical college education. Additionally, 7 to 10 years of related experience are required., • Experience working with PLCs, • Ability to read, interpret, and modify schematics and ladder logic diagrams., • Broad judgment, initiative, and ingenuity with a moderate degree of physical demand when performing the job., • Perform work in physically demanding conditions with periods of heavy lifting greater than 50 lbs., • Ability to work in conditions that include exposure to various types of elements such as cold, heat, noise, dust, oil, cleaners, etc The estimated annualized base salary range for this role is $33 - $38 an hour. Compensation will vary based on skills and experience. New employees are eligible to participate in a robust benefits package on the first day including medical, dental, vision, FSAs, generous 401k contribution, paid holidays, vacation and sick leave, professional development, and more.

About the Company: At Lincoln Electric Products Co., Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations We pride ourselves on delivering high-quality, custom-designed solutions that address the unique needs of our clients across various industries. We are in search of a Manufacturing Engineer. The ideal candidate possesses both a high level of technical expertise and an innate passion to build. You will play a critical role in creating and refining processes to improve manufacturing safety, quality, and productivity. Responsibilities • Develop and improve manufacturing processes for the assembly of panelboards, switchgear, bus systems, wiring harnesses, and control panels., • Create and maintain work instructions, assembly procedures, process flows, and manufacturing documentation., • Support design-for-manufacturability (DFM) and collaborate with Engineering on new product introductions (NPI)., • Analyze production workflows to identify bottlenecks and implement process improvements., • Develop and maintain BOM accuracy, routings, labor standards, and production fixtures., • Implement lean manufacturing practices, including 5S, Kaizen events, standardized work, and waste reduction., • Troubleshoot manufacturing issues, including electrical assembly, wiring, bus bar fabrication, and enclosure modifications., • Evaluate and specify tools, equipment, jigs, and fixtures required for efficient assembly., • Support quality assurance activities such as root-cause analysis (RCA), corrective actions (CAPA), and continuous improvement., • Train production personnel on updated processes, tools, and best practices., • Collaborate with suppliers to improve material quality and manufacturability., • Ensure compliance with UL, NEC, OSHA, and company safety standards. Qualifications Required • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, or related field., • 3+ years of experience in manufacturing engineering, preferably in electrical equipment, switchgear, panelboards, or industrial equipment assembly., • Strong understanding of electrical components: breakers, contactors, relays, transformers, bus bars, metering devices, and control wiring., • Experience reading and interpreting electrical schematics, one-lines, wiring diagrams, and mechanical drawings., • Proficiency with CAD tools (AutoCAD, SolidWorks, or similar)., • Hands-on experience with Lean Manufacturing and continuous improvement., • Experience with UL508A, UL67, UL891, and NEC standards., • Knowledge of ERP/MRP systems for BOMs and routings., • Experience in a high-mix, low-volume manufacturing environment., • Knowledge of CNC fabrication, punch/laser processes, or enclosure manufacturing

Job DescriptionJob Title: Electrical Design Engineer – Power Distribution (Switchboards & Panelboards) Job Location: Kearny, NJ In-Office, Hybrid or Remote: On-site Working Hours: Full-time Languages: English required What the Client Offers: * Salary: USD $110,000 – $130,000 * Comprehensive benefits package * Paid time off + 10 company holidays * Tuition reimbursement * 401(k) with strong employer contribution * Stable, growth-oriented environment within a specialized engineering sector * Relocation support available for the right candidate About the Client: Inner Circle Agency is hiring on behalf of a well-established engineering and manufacturing organization specializing in power distribution and electrical infrastructure. The company supports critical industries including energy, telecommunications, and industrial systems, delivering high-performance, safety-compliant solutions. Role Overview: Our client is seeking a detail-oriented Electrical Design Engineer to design low voltage switchboards and panelboards. This role is based in the Kearny, NJ area, with relocation support available for the right candidate. You will play a key role in developing complex electrical systems and collaborating with cross-functional teams to bring designs from concept to production. Key Responsibilities: * Design low voltage switchboards and panelboards in compliance with applicable standards and regulations * Create 3D sheet metal components and flat patterns * Develop complex 3D assemblies with large multi-component BOMs * Produce wiring diagrams including PLCs, relays, breakers, and power systems * Generate 2D drawings including layouts, single-line diagrams, and front views * Collaborate with engineering, manufacturing, and vendors to ensure accurate execution * Translate client requirements into practical and efficient design solutions Qualifications:Required: * Bachelor’s degree in Mechanical or Electrical Engineering (or related field) * 3 to 5 years of experience in an electro-mechanical or similar environment * Strong proficiency in 2D and 3D CAD software (Autodesk preferred) * Solid understanding of electrical systems and design principles * Strong communication and collaboration skills Preferred: * Experience with UL standards (UL891, UL67, UL508A, UL1558) * Familiarity with the National Electrical Code (NEC) * Experience sizing conductors and overcurrent protection devices (OCPDs) * Knowledge of control circuits and electrical logic

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Junior Communication Engineer (EIT). The Junior Communications Engineer will support the planning, design, coordination, and implementation of communications and low-voltage systems for large-scale infrastructure and transportation projects. The ideal candidate has hands-on experience with fire alarm systems, network systems, and low-voltage communications, and is comfortable working in a multidisciplinary construction and engineering environment. This role will collaborate closely with design teams, construction managers, contractors, and public agency stakeholders to ensure systems are compliant, constructible, and successfully delivered. Responsibilities • Design, review, and coordinate fire alarm systems in accordance with applicable codes, standards, and authority having jurisdiction (AHJ) requirements, • Develop and review communications and low-voltage system designs, including structured cabling, fiber optics, CCTV, access control, PA/VMS, and network infrastructure, • Support infrastructure and transportation projects such as transit facilities, tunnels, stations, roadways, bridges, and related facilities, • Review contractor submittals, shop drawings, RFIs, and technical proposals, • Provide construction-phase support including site inspections, testing and commissioning support, and system acceptance, • Coordinate system interfaces with IT, electrical, and other building systems, • Ensure compliance with project specifications, industry standards, and safety requirements, • Participate in meetings with clients, agencies, designers, and contractors, • Assist with cost estimates, schedules, and risk assessments related to communications systems Qualifications • Bachelor’s degree in Electrical Engineering, Communications Engineering, or a related field (or equivalent experience), • 2+ years of experience in communications or low-voltage systems within construction, engineering, or infrastructure projects, • Engineer in Training (EIT) certification required, • Working knowledge of relevant codes and standards (e.g., NFPA, NEC, local AHJ requirements), • Experience supporting construction management or design-build projects, • Strong technical writing and communication skillsPreferred Qualifications, • Experience on transportation or infrastructure projects (transit, rail, roadway, aviation, or utilities), • Professional Engineer (PE) license preferred, • NICET certification (Fire Alarm or related disciplines), • Familiarity with public agency projects and compliance requirements, • Experience with system integration and testing/commissioning processes BenefitsNaik offers a competitive compensation package including: • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Join Our Team! Sunbelt Rentals strives to be the customer's first choice in the equipment rental industry. From pumps to scaffolding to general construction tools, we aim to be the only call needed to outfit a job site with the proper equipment. Not only do we offer a vast fleet that ranks among the best in the industry, we pair it all with a friendly and knowledgeable staff. Our employees are our greatest asset, and although we present a comprehensive equipment offering, our expertise and service are what truly distinguish us from the competition. We pride ourselves on investing in our workforce and offer competitive benefits, as well as extensive on-the-job training for all eligible employees. As a highly successful national company, we are constantly looking for talented individuals to support our growth. If you are interested in pursuing a rewardingcareer, we invite you to review our opportunities! Job Description Summary Mechanic Are you seeking an entrepreneurial, empowering workplace that allows you to: • Build skills by working on a variety of makes, models & equipment, • Develop new skills for a career track in service or operation management, • Work with an incredible team of people in a safety-focused environment Sunbelt Rentals--the fastest growing rental business in North America--is seeking a Mechanic. This mechanic/technician role performs preventive maintenance, perform diagnostics and make repairs on equipment in the safest, most effective way possible to avoid downtime. Our fleet varies by location but primarily include Aerial Work Platforms, general construction tools and equipment. Our specialty lines locations may have a fleet of large-scale power-generators, pumps, HVAC systems and oil/gas related equipment. Education or experience that prepares you for success: • High school diploma or GED required, some trade school or equivalent training desired, • 3 to 5 years of mechanic experience with similar diesel equipment and/or heavy equipment or specialty lines equipment (large-scale generators, pumps, HVAC or Oil & Gas equipment) strongly preferred Knowledge/Skills/Abilities you may rely on: • May need to provide mechanic's tools of the trade., • Advanced knowledge of hydraulic systems & troubleshooting skills, • Advanced knowledge of electrical systems & troubleshooting skills, • Ability to be flexible with changing priorities in a fast-paced environment. Qualified Veterans Welcome & Encouraged to Apply! The following is a sample (but not exhaustive) list of the MOS, AFSC, and NEC Codes that may have transferrable skill sets that apply to this role: 711 713 2506 2584 4130 4133 4541 5899 6071 6072 7603 7607 7610 7618 13D 13M 13P 13R 13T 2T311A 2T311C 2T312A 2T312B 2T312C 2T331A 2T331C 2T332A 2T332B 2T332C 2T351 2T351A 2T351C 2T352A 2T352C 62B 63A 63D 63E 63H 63M 63N 63S 63T 63Y 88R 91A 91B 91E 91H 91L 91M 91P 91S ABE ABH AS CM EN GSM MM MM(NUC) MR SB Related experience may include: Shop Mechanic, Mechanic, Technician, Service Foreman, Service Manager, Shop Manager, Mechanic Supervisor, Technician Supervisor, Lead Mechanic, Lead Technician, Diesel Technician, Diesel Mechanic, Service Technician, Heavy Equipment Mechanic, Hydraulic Technician, Hydraulic Mechanic, ASE Certified Mechanic, IFPS Certified Technician The hourly wage depends on the agreed rate under the terms of the collective bargaining agreement for this location. Sunbelt also provides a comprehensive benefits package to its full-time employees. This package includes: * Health, Dental and Vision plans * 401(k) Match * Volunteer time off * Short-term and long-term disability * Accident, Life and Travel insurance, as well as flexible spending * Tuition Reimbursement Options * Employee Assistance Program (EAP) * Length of Service Awards You will become eligible for benefits on the first of the month following 30 days from your start date. Sunbelt offers team members the following paid time off from work, subject to Sunbelt's policies (unless specified in a collective bargaining agreement): * 12-25 vacation days depending on years of service * 5 sick days * 6 holidays * 2 half day holidays * 2 floating holidays * 1 inclusion day * 1 volunteer day Gear up for an exciting career! Sunbelt Rentals supports service members. Veterans encouraged to apply.

Electrician - Commercial This Jobot Job is hosted by: Cody Timm Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $30 - $38 per hour A bit about us: Our client is a well-established Real Estate Developer and Manufacturing company based in Pittsburgh, PA. Why join us? • Competitive pay, • Great employee health insurance options, • 401k matching, • PTO and paid-holidays off, • Opportunities for growth and promotions Job Details Responsibilities: As a Permanent Electrician, you will be tasked with a variety of responsibilities that are crucial to the success of our construction projects. Your duties will include: 1. Installing, maintaining, and repairing electrical systems in accordance with NEC, IRC, and IBC standards., 2. Conducting regular electrical inspections to ensure all systems are operating safely and efficiently., 3. Supervising and providing leadership to junior electrical staff, including training and mentoring., 4. Ensuring all work complies with OSHA safety standards and LOTO procedures., 5. Working closely with other construction professionals to ensure electrical work is completed on time and within budget., 6. Troubleshooting and resolving electrical issues in both manufacturing and residential settings., 7. Performing regular maintenance on service panels and other electrical components. Qualifications: To be considered for the Electrician role, candidates must meet the following qualifications: 1. A minimum of 5 years of experience as a Journeyman Electrician., 2. Proven experience in manufacturing, commercial/industrial/residential, and electrical construction., 3. Extensive knowledge of electrical systems, service panels, NEC, IRC, IBC, and electrical inspections., 4. Demonstrated ability to supervise and provide leadership to a team., 5. Experience in training staff in electrical procedures and safety., 6. Familiarity with OSHA safety standards and LOTO procedures. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

This Jobot Job is hosted by: Christie Bauer Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $90,000 - $170,000 per year A bit about us: We are a growing electrical contractor looking for an Estimator. Why join us? Competitive Pay Benefits PTO Paid Holiday and more! Job Details Job Details: We are currently seeking a highly motivated and experienced Estimator for our dynamic team. This role offers the opportunity to work on diverse and challenging projects while utilizing your expertise in the electrical engineering field. With your experience in the commercial construction sector, you will play a vital role in the preparation and submission of electrical estimates. As an integral part of our team, you will have the opportunity to work closely with our project managers and other professionals to ensure the successful completion of our projects. Responsibilities: • Prepare detailed and accurate electrical estimates for commercial construction projects., • Perform electrical take-offs and develop comprehensive bid packages., • Utilize your knowledge of the National Electric Code (NEC) to ensure compliance in all projects., • Manage change orders and communicate any changes or potential risks to the project manager promptly., • Participate in project management activities, including planning, scheduling, and monitoring of projects., • Collaborate with the project management team to ensure that projects are completed on time and within budget., • Regularly review and update estimates, taking into account any changes in materials, labor, or other factors., • Bachelor's degree in Electrical Engineering or a related field preferred., • A minimum of 2 years of experience in electrical estimating for commercial construction projects., • Proficient in NEC and other relevant codes and regulations., • Experience in project management and familiarity with project management tools and software., • Strong knowledge of electrical systems, materials, and the latest industry trends., • Proficient in electrical take-off and bid preparation., • Experience managing change orders and communicating changes effectively. If you are a seasoned Electrical Estimator with a passion for excellence and a knack for details, we would love to hear from you. This is a fantastic opportunity to contribute to a growing company while advancing your career in the engineering industry. Apply today and let's build the future together! Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description NYC well established electrical contractor seeks experienced Senior Project Manager for their growing business. Electrical project managers are responsible for overseeing and contributing to electrical projects for their organization. They are in charge of managing all aspects of electrical tasks and delegating responsibilities to electrical professionals Responsibilities: • Plan, oversee and direct electrical projects for construction., • Disseminate relevant information to various departments related to the project., • Monitor project progress and maintain project schedule., • Develop project budget and track project costs according to contractual obligations., • Review and study project documents including estimates, design drawings, specifications, customer proposals and contracts., • Proven experience (typically 5+ years) in electrical project management, preferably in the construction industry. Bachelor's degree in Electrical Engineering, Construction Management, or a related field is preferred., • Strong knowledge of electrical systems, installations, and industry standards., • Solid understanding of project management principles, methodologies, and tools., • Familiarity with electrical design, codes, and regulations (e.g., NEC, IEC)., • Proficiency in project management software and tools., • Excellent organizational and time management skills., • Strong leadership and team management abilities., • Effective communication and interpersonal skills., • Ability to work under pressure and meet project deadlines.

Join Our Innovative Team as an Electrical Engineer - Shape the Future of Energy Solutions! Are you passionate about pushing the boundaries of energy technology? We're looking for a talented Electrical Engineer to be a key player in our building improvement projects. In this role, you'll design cutting-edge electrical infrastructure to help clients achieve their energy goals with smart, sustainable solutions. At Willdan, you'll join a collaborative and diverse team of mechanical and electrical engineers, solar design experts, project managers, and more. Together, we work to create resilient, efficient, and cost-effective electrical distribution systems that meet the highest standards of excellence. As an Electrical Engineer at Willdan, your contributions will directly impact the future of energy systems. You'll have the opportunity to: • Lead Innovation: Create and design creative electrical systems that transform how energyis used., • Collaborate Across Teams: Work alongside experts in multiple fields to deliver groundbreaking solutions., • Drive Change: Take ownership of projects and make a real impact on the success of our clients' energyobjectives. The Senior Electrical Engineer is responsible for designing the Electrical Infrastructure for our building energy conservation projects. The ideal candidate will have an advanced understanding of power distribution and Distributed Energy Systems (DERs) as it applies to high performance buildings across various vertical markets including commercial, local & state governments, light industrial, educational and health care facilities. Essential Duties and Responsibilities • Experience with electric building design. Design electrical systems upgrades and improvements to improve energy efficiency. Point to Point understanding of power distribution and interconnection to the Utility Grid to the Service Entrance down to the end use receptacle. Advanced knowledge of energy conservation guidelines using IECC, Title24 and projects with LEED Certification., • Fundamentals of Power Distribution. Advanced Understanding of electrical theory covering 3-phase and 1-phase power, power triangle & power factor, Grounding, Principles of Magnetism applied to Transformers and Motors., • Perform Complex Engineering Calculations & Analysis (see qualifications below). In-depth understanding of software apps and resources used in Electrical Engineering (SKM, ETAP, CYME, Excel Tools, etc.)., • Stand By Power and Alternative Energy Sources. Size combustion generators as it applies to high-performance buildings and electrical distribution systems, automatic transfer switches. Emphasis on integrating DER components including PV, BESS and EV charging. Exposure to microgrid design and/or integrating BESS and microgrid controls into solar PV and EV infrastructure projects is a bonus., • Strong Understanding of utility interconnection requirements. Design the electrical infrastructure and protective relays required by the utility for on-site generation. Support the DER team and their efforts as they work with utility providers to submit the required documentation and complete the utility interconnection process., • Excellent Time Management Skills. Ability to work on multiple projects of varying complexities. Ability to work on concurrent projects across multiple geographical regions. Work under limited supervision., • Prioritize Workflow. Able to prioritize project workflow to meet deadlines with minimal supervision, completing projects on time. Paying special attention to quality, accuracy and effort against budget., • Succeed as a Team. Enjoy working within design teams and meeting the project goals in a team-focused environment. Collaborate with other disciplines. Work with local agencies having jurisdiction to ensure compliance with federal, state and municipal requirements and building codes. Support company standards, work with project managers to exceed client expectations., • Forward Thinking. Leverage your creativity and explore new technologies and products., • Supports design team efforts to identify, recommend, and implement new technologies and systems to improve organizational processes and decision-making. Develop innovative solutions that reduce costs with no impact on quality, or long term reliability., • Ability to research new concepts, technologies and apply integrate into our projects., • Start to Finish. You will develop concepts from the ground up. Use information from site visit to develop concept. Produce construction drawings (CDs) using CAD software. Complete CDs and apply for permit. Work with construction teams and contractors to see our designs installed in the field. Review and approval of equipment submittals., • Articulate. The candidate must possess excellent verbal and written communication skills, as well as interpersonal skills. Comfortable presenting to clients, team members and internal leadership., • Occasional Travel Required (~15%). Site visits to document the existing infrastructure. Provide engineering evaluations, electrical systems audits, and construction support as needed., • Bachelor's degree or higher. Electrical engineering, architectural engineering, or building science from a fully accredited ABET program., • PE License is Required., • 8+ years of electrical design experience with commercial, education, government or light industrial projects typically at an MEP consulting firm., • Advanced Understanding of low voltage systems 600V and lower, both AC and DC distributions. Includes 480/277V, 208/120V and 240/120V systems, single phase or three phase. Medium Voltage experience is a plus., • Perform Engineering Calculations. Includes: fault current studies, Arc Flash Analysis, Selective Coordination Studies, Service Entrance Calculations, Transformer Sizing, Overcurrent Protection of Motors & Transformers, Conduit Fill and Conductor Sizing with applicable derating factors., • Knowledge of applicable building codes and regulations including IEEE, NFPA, NEC (NFPA70), California Electric Code (CEC) & Title 24, UL Listings, Life Safety, IBC, and OSHA., • Technical Understanding of Grounding and Bonding., • Expansive product knowledge of manufacturers (Eaton, Schneider, ABB, Siemens, etc.)., • Ability to size and specify distribution equipment: diesel generators, electrical switchgear & switchboards, panelboards, disconnect switches, etc., • Assemble and compile Division26 specifications., • Take Ownership of Projects. Ability to take a project from the initial site visit into preliminary design through Construction Drawing completion. Stay actively involved with the project during the permit process and into Construction., • Proficient in AutoCAD, Revit is a plus., • Skilled in Microsoft Office, Excel, and Teams; working knowledge of Bluebeam Revu. Willdan Energy Solutions participates in E-Verify.

Join Our Team! Sunbelt Rentals strives to be the customer's first choice in the equipment rental industry. From pumps to scaffolding to general construction tools, we aim to be the only call needed to outfit a job site with the proper equipment. Not only do we offer a vast fleet that ranks among the best in the industry, we pair it all with a friendly and knowledgeable staff. Our employees are our greatest asset, and although we present a comprehensive equipment offering, our expertise and service are what truly distinguish us from the competition. We pride ourselves on investing in our workforce and offer competitive benefits, as well as extensive on-the-job training for all eligible employees. As a highly successful national company, we are constantly looking for talented individuals to support our growth. If you are interested in pursuing a rewardingcareer, we invite you to review our opportunities! Job Description Summary Shop Technician (Pump and Power) Are you seeking an entrepreneurial, empowering workplace that allows you to: • Develop a career track, • Leverage your current skills in a challenging role, • Work with an incredible team of people Sunbelt Rentals--the fastest growing rental business in North America--is seeking a Pump and Power Technician 2. The Pump & Power Technician 2 performs basic diagnostics and equipment repairs in the safest and most effective way possible with an emphasis on returning equipment to service to avoid equipment down time. Education or experience that prepares you for success: • 3-5 years of experience with repairing and maintaining Pump & Power equipment, • EPA section 608 universal Certification required Knowledge/Skills/Abilities you may rely on: • Basic understanding of refrigeration (EPA Certified), electrical engines and controllers, dehumidification equipment from CDI and munters, compressed air treatment (dryers/filters/aftercooler), • Knowledge of generators, power distribution, A/C, Heater and Shoring; possesses an understanding of diesel equipment, generators and air compressors, • Ability to read electric schematics and hydraulic flow, • Experience with similar equipment The physical demands of this role require bending, squatting, crouching, reaching, lifting 25 pounds or more, and working indoors/outdoors when required by the job. The above description is not a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day. Reasonable accommodations may be made to comply with applicable laws. Sunbelt Rentals is an Equal Opportunity Employer - Minority/Female/Disabled/Veteran and any other protected class. The following is a sample (but not exhaustive) list of the MOS, AFSC, and NEC Codes that may have transferrable skill sets that apply to this role: 001030 001085 001140 002068 1391 2F011 2F031 2F051 2F071 301 3374 3601 3E412 3E432 3E452 4140 4142 4143 4145 4149 4151 4222 4225 4226 4227 4229 4231 4233 4234 4237 4253 4291 4307 4308 4314 4316 4324 4355 4366 4509 4604 52X 63J 7022 70F9 7601 7606 7612 7613 7614 7615 7616 7617 77F 91A 91D 91E 91J 91L 91P 91X 92F 9559 9594 95AB ABE ABF AS EM EN FC GSE GSM MM MM(NUC) MR $51.28--$53.28 The hourly wage depends on the agreed rate under the terms of the collective bargaining agreement for this location. Related experience may include: Construction Equipment Mechanic, Equipment Mechanic, Equipment Technician, Field Mechanic, Field Service Technician, Field Technician, Heavy Equipment Mechanic, Heavy Equipment Technician, Mechanic, Mobile Heavy Equipment Mechanic, Lubricator, Machine Repairer, Maintainer, Maintenance Electrician, Maintenance Man, Maintenance Mechanic, Maintenance Technician, Maintenance Worker, Oiler, Overhauler The hourly wage depends on the agreed rate under the terms of the collective bargaining agreement for this location. Sunbelt also provides a comprehensive benefits package to its full-time employees. This package includes: * Health, Dental and Vision plans * 401(k) Match * Volunteer time off * Short-term and long-term disability * Accident, Life and Travel insurance, as well as flexible spending * Tuition Reimbursement Options * Employee Assistance Program (EAP) * Length of Service Awards You will become eligible for benefits on the first of the month following 30 days from your start date. Sunbelt offers team members the following paid time off from work, subject to Sunbelt's policies (unless specified in a collective bargaining agreement): * 12-25 vacation days depending on years of service * 5 sick days * 6 holidays * 2 half day holidays * 2 floating holidays * 1 inclusion day * 1 volunteer day Gear up for an exciting career! Sunbelt Rentals supports service members. Veterans encouraged to apply.

Description We are seeking a Lead Transmission Line Engineer who will manage a collaborative and dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The successful candidate will serve as a Lead Engineer and Technical Project Manager on high voltage electric transmission line design projects of overhead and underground systems for some of the largest utilities in the country as well as regional utilities. The candidate will apply NESC, ASCE, ACI, NEC, and other applicable standards in the engineering and design of all types of capital and maintenance projects from 34.5 kV to 765 kV. Additionally, the candidate will direct a team of engineers that regularly perform engineering analyses, PLS-CADD modeling, structure loading calculations, foundation design using MFAD and/or LPILE, design structure framing and hardware assemblies, draft plans and specifications, and prepare bill of materials and procurement documents across project planning, engineering, environmental, permitting, and construction management phases. The successful candidate can expect a fast-paced, diverse work environment and flexible work hours/work arrangements as well as a manager and peers who will encourage career development and growth! In addition, the successful candidate will be involved in applying AI, automation, and digital design platforms to streamline grid modernization and increase design efficiency. This is a senior leadership role with primary responsibilities in client relations, staff management, proposal development, scope creation/change, project execution, and new business capture for the team's full book of work. The successful candidate will be able to communicate clear expectations, goals, and vision; manage the performance of direct reports; motivate, coach, and mentor skilled professionals; and appropriately delegate project work. The candidate must be capable of managing collaboration and a positive team culture to achieve successful results. Location: This position is a hybrid work position with the potential for remote work for the right candidate located in Pennsylvania, Ohio, or West Virginia. Relocation assistance may be available for qualified candidates. The Challenge: • Direct multiple design teams simultaneously executing various projects and programs for multiple clients., • Develop a team of engineers by training, coaching, and nurturing Leidos' engineering talent., • Supervise staff by approving timesheets and running the annual performance review process., • Participate proactively as a member of the leadership team of the Transmission Line Section., • Create responses to RFPs, RFIs, and RFQs from clients for new work, including proposal creation and definition of scope of work., • Possess a growth mindset to foster creative problem solving for our clients' most complex issues., • Promote continuous improvement to develop streamlined processes and tools that facilitate improvements to departmental technical resources via innovation and automation., • Delegate tasks to staff, forecast and plan their future workload, and run recruiting activities to support aggressive growth goals., • Drive the quality control process for the execution team to ensure the highest level of quality in all deliverables., • Liaise with clients to maximize affinity, facilitate business development growth, and foster long-term relationship building., • Manage portfolio health by leveraging Project Managers to independently drive and monitor scope, schedule, and budget. Accountability for schedule compliance requires high awareness and support from assigned Lead Engineers. What Sets You Apart (Required): • Bachelor's degree in Civil, preferred, or Mechanical Engineering with eight plus (8+) years of relevant experience in the design of high voltage electric utility transmission systems., • Expertise in PLS-CADD and PLS-POLE., • Engineer In Training (EIT) certification., • Work effectively in a team environment; can also work independently., • Track record of outstanding communication to serve as primary point of contact for existing and perspective clients., • Business acumen with a record of understanding and meeting key project performance metrics., • Working onsite in a Leidos or client office is a possibility; some periodic travel may be required., • Ability and passion to develop staff through mentoring. Favorable If You Have: • Two plus (2+) years of supervising staff., • M.S. degree in Structural Engineering., • Experience with TOWER., • P.E. certification or the ability to achieve P.E Certification in 6 months., • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus. Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world's toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PowerDelivery PDSTLINE If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. November 3, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $92,300.00 - $166,850.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job Description Electrical Engineer New York City Direct Hire / Permanent Placement $80k – $140k Base Salary (Dependent on Experience), Full benefits, Flex/ Hybrid schedule, Bonus, Profit Sharing, etc. OVERVIEW The Electrical Engineer will be responsible for delivering quality electrical system design across a variety of market sectors, including commercial, healthcare, and higher education. ROLE/ RESPONSIBILITIES/ SKILLS/ EXPERIENCE • Electrical design of power distribution, lighting, and fire alarm per NEC codes and standards, • Electrical equipment calcs, selection, and layout of switchgear, transformers, electrical panels, and emergency generators, • Site visits, presentations for clients/ design review, site Surveys, respond to RFIs, review shop drawings, • Revit, AutoCAD, SKM, AGI 32, MicroStation (a plus), • Degreed BSEE BSAE or equivalent, • 3+ years of Industry experience in the US, • EIT, PE, LEED Preferred (a plus)

Job Description At Total Fire Protection, our MISSION is simple, “Embracing Relationships, while keeping you safe, and delivering First Class Service.” You won’t just be a team member at Total Fire Protection, but a valuable contributor. Our diverse team members support one another as we work towards our common goal of bringing Fire and Life Safety to our customers nationwide. Our Company culture has been built on the foundation of our CORE VALUES that define “Who We Are” and we hold each other accountable to these CORE VALUES. Our Five-Alarm Growth represents our commitment to embracing change, evolutionary action, continuous learning, constant improvement and full engagement. We place the priorities of our Team First and our team members back it up through Do What You Say! execution. Total Fire Protection believes that Do the Right Thing! builds loyalty, trust and respect because We Care about our team members, our customers and our community. As a Fire Alarm Technician, you will conduct routine fire inspections, test, and maintenance of fire alarm systems representing Total Fire Protection. Your primary goal will be to ensure that fire alarms are in proper working condition and compliant with relevant safety regulations. This position requires a strong knowledge of fire alarm types, components, and servicing procedures. Responsibilities: • Verifies proper operation; prepares accurate and timely documentation for work performed., • Interfaces with inspection supervisor and dispatcher to ensure that all work is scheduled/handled., • Collaborates with customers to explain work to be performed and coordinate through jobsite conditions., • Resolves customer concerns as quickly and effectively as possible., • Ensures customer satisfaction and a positive customer experience., • Prepares timely inspection/ deficiency reports for submission to management., • Maintains and organizes truck inventory and all testing equipment., • Must adhere to company safety policies and procedures., • Must have a strong work ethic., • Must be detail-oriented, strong written and verbal communication skills., • Performs other duties, as assigned. Preferred Experience • FDNY Certificate of Fitness: S-98, • Must have one (1) or more years of experience inspecting fire alarm products or industry- related experience., • Must be proficient in the use and application of mobile app devices utilized for scheduling, payroll, and inspection reporting., • Must have a working knowledge of test equipment, such as multimeters, simulated battery testers, and aerosol smoke and carbon monoxide equipment., • Required to have a full understanding of NFPA 72 chapter 14– NEC – IBC and NFPA 101., • Must have a valid driver’s license with a clean record and be able to clear a drug screening upon request. Physical Requirements • While performing the duties of this job, the employee is regularly required to:, • Work in unusual and sometimes difficult positions/circumstances such as with ladders, scaffolding, high lift equipment, wires, ducts, crawl spaces, attics, above ceilings, etc., • Lift, move, and hold up to approximately 50 lbs., • Must be able to work a full-time, flexible schedule with “on call availability” and must be able to travel on short notice., • Must be able to drive a motor vehicle (day and evenings) for extended time periods., • Commitment to maintaining a safe working environment and adhering to safety protocols.

Job DescriptionELECTRICAL PROJECT MANAGER – NYC | $80K–$110K | COMMERCIAL PROJECTS Location: New York City (All Boroughs + NJ Projects) Pay: $80,000 – $110,000 base (based on experience) Schedule: Monday–Friday | 07:00–15:30 Type: Full-Time | On-Site (No Remote) RUN PROJECTS. OWN RESULTS. GET PAID FOR PERFORMANCE. We are hiring an experienced Electrical Project Manager who can take full control of commercial projects and drive them from kickoff through completion without constant oversight. If you understand electrical construction, can manage budgets, and know how to keep projects moving efficiently, this is a strong opportunity to step into a high-impact role. Projects range from $50K to $2.5M and include commercial renovations, office fit-outs, retail spaces, and high-end residential work. You will serve as the central point of execution between field teams, office operations, and clients. RESPONSIBILITIES • Manage the full project lifecycle from planning through closeout, • Oversee budgets, forecasting, billing, and cost tracking, • Develop and maintain project schedules in coordination with field teams, • Handle submittals, RFIs, and all project documentation, • Coordinate with General Contractors, owners, engineers, and field crews, • Manage procurement of materials, subcontractors, and equipment, • Ensure projects remain on schedule, within budget, and compliant, • Maintain clear communication between field and office teams Requirements • 5+ years of experience as an Electrical Project Manager (commercial projects), • Proven experience managing projects ranging from $50K to $2.5M, • Strong understanding of NEC and NYC electrical codes, • Ability to read and interpret full construction drawing sets, • Experience with project management software such as Procore, Autodesk, or similar tools, • Strong communication and leadership skills Preferred: • Electrical field experience, • Experience working on NYC-based projects or union environments Benefits • $80,000–$110,000 base salary, • 401(k) available, • Health benefits negotiable, • Consistent pipeline of active projects, • Opportunity for advancement into senior-level roles WORK ENVIRONMENT • Field-based role across NYC and New Jersey job sites, • Must report to Staten Island office 1–2 times per week, • This is a fully on-site role with no remote or hybrid option

Job Description Senior Electrical Designer - MA, PA (Hybrid) Who we are! Vanderweil Engineers is a nationally recognized, top-ranked engineering firm specializing in MEP/FP and technology services. For over 75 years, we've delivered innovative solutions across diverse sectors—including Science & Technology, Mission Critical, Academic, Healthcare, and Commercial. As one of the largest independently owned engineering firms in the U.S., our team of 500+ professionals operates from nine offices nationwide, bringing deep expertise and a commitment to excellence to every project. If you are looking for an opportunity to grow your career with some of the best minds in the industry, we are looking for you. We offer growth and stability in an ever-changing volatile environment. We are looking for a Senior Electrical Designer in our Power group. Our Power Department is leading the future of the energy and utility generation industry, focused on combined heat and power, alternative fuels like biogas and hydrogen, fuel cells, and battery storage, among many other cutting-edge technologies. Responsibilities include the following: • Produce drawings and design of electrical systems for heavy industrial projects such as cogeneration power plants, central heating and cooling plants, renewable energy systems and large chillers and boilers., • Must have general understanding of medium voltage and low voltage electrical distribution systems including switchgear, switchboards, motor control centers, panelboards, generators, and transformers., • Should be capable of designing switchgear, relaying & metering diagrams, lighting, raceways, grounding systems, and lightning protection systems., • Investigation and interpreting manufactures data, set up of model views and sheets using corporate standard., • Perform design calculations including feeder and branch circuit sizing, protective device sizing and voltage drop for review by the Engineer of Record., • Coordinate routing of cable, and miscellaneous components with other trades., • Assuring tasks are complete, accurate and in accordance with good engineering practice., • Review project files for compliance with standards and procedures., • Ability to interpret one-line diagrams, AC three-line diagrams and DC elementary diagrams., • Design and layout systems, create drawings and wiring plans for installation., • Should have experience with physical design of conduits and cable trays., • Validate designs and prepare customer presentation materials., • Use the companies’ internal database to plan personnel and scheduling needs. Essential Skills & Requirements: • Associate degree or equivalent from a vocational training program or technical school., • 5 plus years’ experience desired., • Revit certification extremely required or capable of learning., • Familiarity with NEC and NESC is essential, IEEE desirable., • Experience using BIM360 Cloud Collaboration platform is a plus., • Good oral and written communication skills, • Motivated and self-sufficient, strong computer skills and detail-oriented perspectives., • Ability to work individually or in a team setting with strong interpersonal, problem solving and analytical skills., • Customer service perspective with the ability to communicate effectively with staff and clients., • Knowledge of MS Office products including Word, Excel, Outlook. Our Flexible & Hybrid Work Culture We know that work/life integration is important to our employees. Our hybrid work style allows team members to have flexibility while building their skills through in-person exposure to industry experts. We prioritize wellness with programs that support physical and behavioral health, and we’re proud to foster an equitable and inclusive workplace. Learn more about our culture at . The total compensation that we expect to pay for this position is dependent on years of experience, licensure, education, geographic location, and project portfolio but expected to be in the $90,000.00 to $115,000.00 annually.

Job Description Overview Related Digital is a leading vertically integrated data center development and investment platform. We deliver digital infrastructure solutions to hyperscale technology companies so they can accelerate artificial intelligence and cloud computing ambitions. Founded by Related Companies, one of the most prominent, privately-owned real estate development firms in the United States, Related Digital uniquely combines Related’s 50-year+ history of executing complex real estate and infrastructure projects with its track record in real estate investing and clean energy solutions. With a multi-billion-dollar, near-term development pipeline in the U.S., Related Digital has the expert capabilities, depth of expertise and national scale to help hyperscale companies significantly grow their data center capacity on a rapid timeframe. Strategic Advantage: Related Digital harnesses expertise across real estate development and investment, data center development, complex infrastructure construction and clean energy development to bring differentiated solutions to hyperscale technology companies. National Footprint: Related Digital is based in New York and Dallas with operations across the United States. Related Companies has offices in gateway cities across the U.S. and London, and developments in 28 states and the District of Columbia, and boasts 4,000 employees. We are proud to be an equal opportunity employer and are deliberate about the team and culture we are building. We aim to ensure competitive total compensation that is commensurate with experience, workplace geography, and market standards. For information about how we use your personal information, including information submitted for career opportunities, please review our Privacy Policy at . #RelatedDigital #LI-RB1 #Onsite Responsibilities We are seeking an experienced Electrical Engineer with a strong background in data center design to join our data center procurement team, which supports our growing development pipeline. This team is responsible for establishing equipment standards, evaluating long-lead vendors, and driving technical decision-making that supports OFCI procurement strategies. This individual will play a key role in the design, technical evaluation, and delivery of complex, mission-critical facilities and should have deep experience in high-reliability power systems, redundancy, and large-scale electrical infrastructure. This position will be based full-time at our Hudson Yards headquarters. Responsibilities: • Lead and coordinate electrical design for data center projects from concept through construction, ensuring alignment with procurement strategy and long-lead equipment requirements., • Develop and review power system layouts, single-line diagrams, load calculations, and technical specifications for OFCI equipment such as switchgear, UPS, generators, and PDUs., • Support vendor prequalification, bid evaluation, and equipment standardization across the platform., • Ensure electrical designs meet project performance goals, code requirements, and industry standards (NEC, IEEE, NFPA 70E)., • Collaborate closely with internal project managers, procurement leads, mechanical engineers, construction teams, and external consultants to ensure coordinated technical solutions., • Evaluate utility service requirements and coordinate with local utility providers for medium- and high-voltage service connections., • Review and approve submittals, RFIs, and shop drawings during construction., • Support commissioning activities and validate system performance, redundancy, and reliability., • Participate in value engineering, risk assessments, and constructability reviews., • Stay current on emerging technologies, sustainable energy solutions, high-density cooling/power trends, and innovations in electrical equipment manufacturing. Qualifications • Bachelor’s degree in Electrical Engineering or related discipline; PE license preferred., • 5- 10 years of professional experience in electrical design, with a focus on data centers, mission-critical facilities, or large-scale commercial infrastructure., • Deep understanding of power distribution systems, UPS, generators, grounding, lighting, and fire alarm systems., • Familiarity with power modeling and load analysis software (e.g., SKM, ETAP, Revit MEP)., • Strong technical writing, organization, and communication skills., • Proven ability to manage multiple priorities in a fast-paced environment., • Collaborative mindset and ability to work effectively with cross-functional teams and external partners.

Job DescriptionJob Title: Senior Electrical Design Engineer (Switchboards / UL891) – Relocation Available Job Location: Kearny, New Jersey (NJ) In-Office, Hybrid or Remote: On-site Working Hours: Full-time Languages: English required What the Client Offers: * Salary: USD $120,000 – $140,000 * Comprehensive benefits package * Paid time off + 10 company holidays * Tuition reimbursement program * Strong 401(k) employer contribution * Long-term growth and leadership opportunities * Relocation support available for the right candidate About the Client: Inner Circle Agency is hiring on behalf of a well-established engineering and manufacturing organization specializing in advanced electrical infrastructure solutions. The company supports large-scale projects across industries such as energy, telecommunications, and industrial systems, with a strong reputation for quality, innovation, and technical excellence. Role Overview: Our client is seeking a Senior Electrical Design Engineer to lead the design of low voltage switchboards and panelboards. This role is ideal for someone with strong technical expertise who also enjoys mentoring junior team members and contributing to complex, high-impact engineering projects. Key Responsibilities: * Design low voltage switchboards and panelboards in compliance with industry standards * Develop detailed 3D sheet metal components and large-scale assemblies (150+ BOM items) * Create wiring diagrams including PLCs, relays, breakers, and control components * Produce and interpret technical drawings including one-line diagrams, layouts, and front views * Collaborate with manufacturing, engineering teams, and external vendors to ensure design accuracy * Support the full design lifecycle, ensuring adherence to internal standards and processes * Mentor and guide junior engineers as needed Qualifications: Required: * Bachelor’s degree in Electrical or Mechanical Engineering (or related field) * 4–8 years of experience in switchboard or panelboard design (UL891 or equivalent environment) * Strong proficiency in 2D and 3D CAD software (Autodesk preferred) * Solid understanding of electrical systems and components * Excellent communication skills and ability to work cross-functionally Preferred: * Experience with UL891, UL67, UL508A, or UL1558 standards * Familiarity with the National Electrical Code (NEC) * Experience sizing conductors and overcurrent protection devices (OCPDs) * Knowledge of control circuits and electrical logic systems

Job DescriptionSummary We are seeking a skilled Electrical Engineer to join our growing MEP team and contribute to the successful design and delivery of complex commercial building projects. This role is ideal for an individual who excels in both technical design and client collaboration, with a passion for innovative solutions, system integration, and code-compliant engineering practices. The ideal candidate will have experience working across multiple project phases—from conceptual design to construction administration—and a strong working knowledge of the NEC, Title 24, and applicable building codes. Key Responsibilities * Lead the conceptualization and design of electrical systems for commercial, institutional, and mixed-use buildings * Prepare engineering calculations including load analysis, short circuit studies, voltage drop, generator sizing, and Title 24 documentation * Develop detailed construction documents and electrical specifications using AutoCAD and Revit * Conduct building assessments and due diligence reports to document existing electrical infrastructure and recommend system upgrades * Support the team during construction administration, including field observations, punch lists, RFIs, and cost evaluations * Coordinate with MEP teams, architects, contractors, and consultants throughout project lifecycle * Provide mentorship and technical guidance to junior engineering staff * Foster and grow client relationships through reliable delivery, technical excellence, and responsive communication Key Competencies & Skills * Proficiency with Revit, AutoCAD, and Microsoft Office * Strong verbal and written communication skills to collaborate with project stakeholders * Familiarity with NEC, California Building Code, NFPA, and related codes and standards * Skilled in producing engineering reports, technical analyses, and construction documents * Creative problem-solver with an ability to manage multiple priorities and deadlines * Prior experience with construction administration, including submittals and field support * Effective project coordination through all design phases—from schematic through CD and CA Qualifications * Bachelor’s Degree in Electrical Engineering or Architectural Engineering * 3+ years of experience in electrical building system design (commercial or institutional preferred) * PE licensure (or in progress) is a plus * Strong understanding of emergency power systems, lighting systems, fire alarm, and power distribution Compensation & Benefits * Competitive base salary (commensurate with experience) * Medical, dental, and vision insurance * 401(k) with employer match * Paid holidays and generous PTO * Career advancement and professional development support

Job Description R.J. McGee Engineering is a successful mechanical, electrical, plumbing, fire protection, and fire alarm design firm serving the New York City market. We specialize in healthcare, retail, commercial interiors, K-12 education, and hospitality sectors. We are seeking a skilled and highly organized Electrical Engineer with experience in electrical and fire alarm engineering to work closely with the firm principal on diverse design and construction administration projects. Position Requirements • Bachelor of Science in Electrical Engineering or related field., • 4 to 8 years of relevant experience in electrical and fire alarm engineering design., • Strong proficiency in AutoCAD and ability to adapt to company drafting standards., • Deep understanding of local and national building codes governing electrical and fire alarm design., • Ability to obtain a Professional Engineer license within 2 years., • Strong technical writing and communication skills for client interaction., • Conduct detailed surveys of existing electrical and fire alarm systems in existing buildings., • Perform electrical load calculations pursuant to NEC and draft load letters for utility companies., • Develop complete and functional HVAC designs including ductwork, piping, and heating and cooling systems., • Design and specify diesel generators, uninterruptible power supply systems, and lighting control systems., • Create one-line riser diagrams, electrical service upgrades, and emergency power system designs., • Coordinate designs to ensure constructability and lead internal firm efforts for project delivery., • Attend meetings with clients and user groups to communicate engineering concepts professionally., • Hybrid work schedule available based on project needs, site surveys, and principal requests., • Four weeks of total time off per year including three weeks of paid time off and one week for sick or personal leave., • Must submit professional references., • Must provide samples of work from at least three projects completed within the last three years., • Must provide writing samples consisting of professional correspondence to outside clients.

Job Description High Rise Fire and Security, affectionately known as High Rise, founded in 1992, is a leading fire alarm, life safety and security systems solutions provider. We provide a broad range of products and services including, but not limited to, the design, installation, service and maintenance of Fire Alarm, Auxiliary Radio Communication, Area of Refuge, Parking Garage Gas Detection, Card Access, Camera Surveillance, Video Intercom and Intrusion Systems. High Rise is an Edwards Systems Technology (EST) Strategic Partner and a multi-year winner of “Strategic Partner of the Year Award” for the Northeast Region. We are the first North American member of the SCUTUM Group. SCUTUM, founded in 1989, is a fast-growing, privately owned, leading European life safety company with offices in France, Germany, United Kingdom, Belgium, the Netherlands and Luxembourg. SCUTUM complements our solutions with additional products, services and expertise in electronic security, cyber security and defense security with an Artificial Intelligence (AI) platform. At High Rise, we pride ourselves on our ability to maintain thorough and up-to-date industry knowledge. Our employees are equipped with comprehensive knowledge and extensive experience in providing life safety system and electronic security solutions throughout New York City, SE Florida and the surrounding areas. We are currently looking for an Installer to add to our team. With a solid reputation in the market, ever so growing Client base, cutting edge products and services, now is a great time to join our team. Required Education and Experience • High School Diploma or GED equivalent / Some Trade School / 6 months to 2 years trade school certification and 4 years of fire alarm and/or security experience, • Conduct visual inspection for wear and tear on all fire alarm devices to include fire alarm control panel, batteries, data gathering panel (DGPs), notification appliances, initiating devices, and remote annunciators as per NYC, NFPA, and HRFS requirements, • Conduct mechanical testing on all applicable fire alarm devices as per NYC, NFPA, and HRFS requirements, • Conduct test and response on all applicable fire alarm devices as per NYC, NFPA, and HRFS requirements, • Sanitize all fire alarm devices for proper upkeep and maintenance, • Serve as lead technician on a small installation job, i.e. addition, by managing client relationship on site, providing onsite training to junior technicians, leading the onsite safety briefings (“Toolbox Talks”), and monitoring technician parts to maintain adequate stock levels, • Respond to service requests, • Read and understand system status on Fire Alarm Control Panel (condition, address, device), • Conduct diagnostic tests to determine cause of alarm and/or trouble system status, as well as ground faults, • Requisition required parts when necessary to repair problem, • Adjust, replace, or repair defective device(s) to meet NYC, NFPA, and HRFS requirements, • Conduct testing on all repaired devices as per NYC, NFPA, and HRFS requirements, • Identify code issues and non-conformance issues, and make recommendations on alternative solutions to client/office, • Elevate status of service call to Programming Unit as required, • Study blueprints and schematics and determine methods, materials, and equipment needed to complete assignment, • Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters and voltmeters to ensure compatibility and safety of system, • Perform technician routine maintenance on tools, test equipment, etc., • Plan the layout of wiring systems; measure, cut, and bend wire conduits, • Thread conduit ends, connect couplings, and fabricate and secure conduit support brackets, • Drill holes and pull or push wiring through openings, • Dig trenches or holes for installation of conduit or supports, • Strip insulation from wire ends and attach wires to terminals for subsequent soldering, • Install electrical and electronic control systems and insulated cables, • Assemble and fabricate electrical and electronic components and appliances, • Connect electrical power to sound and visual communication equipment, signaling devices, and heating and cooling systems, • Test completion of circuits using test equipment, • Test for, locate, and repair electrical malfunctions in wiring and parts, • Paint a variety of objects related to electrical functions, • Maintain tools, vehicles, and equipment and keep parts and supplies in order, • Ensure job site is left in a better state than when we started, • Communicate and coordinate with clients on job scope and with line manager and report on progress on a regular basis, • Maintain accurate records of all work performed, materials used, and communicate any problem encountered or identified with the alarm system on work order, • Generate system status reports upon completion of testing and inspecting, • Full knowledge of fire alarm systems and operation, and fire alarm terminologies, • Ability to interpret and apply blueprints, schematics and drawings, maintenance manuals, and assembly instructions, • Understanding and application of NYC Building codes and NFPA fire alarm codes, • Familiarity with all local electrical codes, i.e. Article 760 of National Electrical Code (NEC), • Full knowledge of fire alarm products, EST products preferred, • Strong technical and analytical skills, i.e. diagnosing the cause of electrical breakdowns, • Ability to make recommendations on alternative solutions to client / office, • Ability to function in a self-directed environment, • Effective use of hand tools (meter, toner, etc.), • Understanding of basic electronics and electrical theories and principles (Ohm’s Law, AC/DC, etc.), • Ability to demonstrate the safe use of ladders, scaffolding, lifts, and related equipment required, • Knowledge of proper grounding and bonding methods, • Familiarity with electrical equipment and proper terminology, and an understanding of the dangers of live electricity, • Ability to make mathematical computations and color coding, and possess manual dexterity, • Acceptable report writing procedures, • Good listening, verbal, and written communication skills, • Good time management skills, • Understanding of all company policies and procedures, • Possess S-78 certification or obtain it within 3 months of hire, • Ten-Hour OSHA Construction Safety Certification, • Four-Hour DOB Scaffolding Certification within 3 months of hire, • Completion of HRF Client Service and technical training within the first 3 months of hire, • Obtain and maintain S-98 certification within 3 months of hire

Job DescriptionJob Description We are seeking a Senior Project Development Engineer with a strong engineering background and customer-facing experience to support the development of distributed energy resources (DER) and energy efficiency, and demand management projects. This role focuses on identifying, assessing, and developing energy projects-including battery energy storage systems (BESS) and other energy efficiency and resiliency measures-for Commercial, Utility and Industrial (C&I) customers. The ideal candidate combines technical depth with strong communication skills, enabling them to work directly with customers, internal engineering teams, and external stakeholders throughout the project development lifecycle. Responsibilities Key Responsibilities • Lead the development of DER projects from early-stage concepts through pre-construction, with a focus on battery energy storage systems (BESS) and integrated energy solutions., • Conduct technical and economic feasibility assessments for distributed energy resources, including energy storage, load management, and other energy measures., • Perform energy assessments and site evaluations for C&I customers to identify optimization, resilience, and decarbonization opportunities., • Act as a customer-facing technical lead, translating complex engineering concepts into clear, actionable recommendations for non-technical stakeholders., • Develop project scopes, conceptual designs, and high-level system configurations for DER solutions., • Support financial modeling inputs by providing accurate technical assumptions, system sizing, and performance estimates., • Collaborate with internal teams (engineering, sales, finance, legal, offering, sourcing and construction) to advance projects through development milestones., • Coordinate with utilities, vendors, and technology providers on interconnection requirements, equipment selection, and system capabilities., • Support permitting, interconnection applications, and incentive program participation as needed., • Stay current on DER technologies, market trends, regulatory changes, and utility programs impacting project development., • Travel up to 30% Qualifications YOU MUST HAVE • Bachelor's degree in engineering (Electrical, Mechanical, Industrial, Energy, or related discipline)., • Experience in distributed energy resources project development, including energy storage and energy efficiency measures., • Hands-on experience with battery energy storage systems (BESS) projects, including early-stage development and technical evaluation., • 5 plus years of experience in Commercial & Industrial (C&I) customers and performing energy assessments or audits and developing strong value propositions, • Maximizing and Evaluation of Custom Incentive, Grants and Tax Credits to improve ROI on energy and infrastructure upgrade projects, • Strong understanding of DER technologies, system sizing, and performance metrics., • Ability to engage directly with customers and communicate technical concepts clearly and confidently., • Experience supporting multiple projects simultaneously in a fast-paced environment. WE VALUE • Experience with utility interconnection processes and incentive programs., • Familiarity with DER financial models, pro formas, PPA, EPC, and EAAS., • Knowledge of relevant codes and standards (e.g., NEC, IEEE, UL) related to DER, energy storage and energy infrastructure upgrades, • Experience working in customer-facing engineering or solutions development roles. Key Skills • Distributed Energy Resources (DER), • Battery Energy Storage Systems (BESS), • Development of Energy and Infrastructure Improvement Measures in Industrial Facilities, • Project Development & Feasibility Analysis, • Energy Assessments & Audits, • Customer Engagement & Technical Consulting, • Cross-functional Collaboration and Multi-tasking on projects, • Technical Documentation & Conceptual Design, • Regulatory Compliance & Incentive Program Knowledge The annual base salary range for this position is $130,000-$162,000. Please note that this salary information serves as a general guideline. Honeywell considers various factors when extending an offer, including but not limited to the scope and responsibilities of the position, the candidate's work experience, education and training, key skills, as well as market and business considerations. BENEFITS OF WORKING FOR HONEYWELL In addition to a performance-driven salary, cutting-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: ABOUT HONEYWELL Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical challenges around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company committed to introducing state-of-the-art technology solutions to improve efficiency, productivity, sustainability, and safety in high-growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. Learn more about Honeywell: click here THE BUSINESS UNIT Honeywell Building Automation (BA) is a leading global provider of products, software, solutions, and technologies that enable building owners and occupants to ensure their facilities are safe, energy efficient, sustainable, and productive. BA products and services include advanced software applications for building control and optimization; sensors, switches, control systems, and instruments for energy management; access control; video surveillance; fire products; and installation, maintenance, and upgrades of systems. Revenues in 2022 for BA were $6B and there are approximately 18,000 employees globally. To learn more, please visit click here . The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Posting date: January 30, 2026 About Us Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable.

Job Description Electrical, Controls Engineer - Industrial Electro-Mechanical Machinery Industry Focus: Industrial Machinery I Electromechanical Equipment I Custom Automation Systems Robotics I Industrial Controls I Food and Beverage Manufacturing I Packaging Equipment I Water and Wastewater Treatment I Process Equipment I OEM Machine Building We are currently seeking to identify (2) Electrical Controls Engineers to join a well-established and growing industrial equipment manufacturer with over 50 years of engineering excellence. One opportunity is ideal for a junior to mid-level candidate with at least 2+ years of relevant experience, and the other is targeted for a senior-level engineer with more years of hands-on experience in electrical design, programming, controls, and industrial automation. This is your chance to join a team that builds large-scale electromechanical systems from concept through completion. From food production lines to custom process and water treatment equipment, you'll be working on machinery that makes a real-world impact. Responsibilities: · Design, develop, and program industrial electrical control systems to meet engineering and client requirements · Create electrical schematics, wiring diagrams, and panel layouts using AutoCAD Electrical or similar design software · Specify, select, and configure control system components such as PLCs, VFDs, relays, sensors, and breakers · Program PLCs and HMIs (Allen-Bradley, Siemens, or similar platforms preferred) · Layout and design control panels and motor control centers (MCCs) · Perform validation testing and troubleshoot electrical systems during build and final assembly · Collaborate closely with mechanical engineers, software engineers, and production teams to ensure full integration · Provide technical documentation including BOMs, manuals, wiring lists, and startup procedures · Travel as needed for commissioning and system validation (minimal and planned in advance) · Stay current with evolving industry technology, best practices, and safety standards Qualifications: We are hiring for two experience levels. Candidates must meet the criteria for one of the following profiles: Junior to Mid-Level Role: · Minimum 2 years of experience in electrical controls, panel design, or related engineering environment · Experience with AutoCAD Electrical or similar drafting tools · Working knowledge of industrial components and safety regulations · Basic PLC programming knowledge or exposure to automation software · Strong interest in hands-on engineering, testing, and troubleshooting · Bachelor's degree in Electrical Engineering or equivalent hands-on experience Senior-Level Role: · Experience in electrical controls and industrial automation · Proficiency in AutoCAD Electrical and strong PLC/HMI programming experience · Deep understanding of UL, NEC, NFPA 70E, and electrical safety standards · Demonstrated success leading projects or contributing to complex custom machinery builds · Ability to mentor junior team members and drive design improvements · Background in electromechanical system design and manufacturing support What Makes This Opportunity Unique: · Privately owned and financially strong company with over 50 years of proven success · All engineering and manufacturing is done in-house at our US-based facilities · Recession-resistant with projects in food processing, water treatment, packaging, and more · Work directly on high-impact custom systems from design to completion · Short lead times and an integrated design-build process · Access to a seasoned engineering team for mentorship and collaboration · Competitive salary structure with performance bonuses · Opportunities for growth into technical leadership or project management · Continued access to learning and development in electrical, automation, and mechanical engineering · Team-focused culture that values practical problem-solving, quality, and innovation Traits That Set You Up for Success: · Detail-oriented and self-driven with a strong sense of accountability · Hands-on mindset and curiosity to understand how systems work · Enjoy working on one-off and custom systems that challenge your engineering creativity · Collaborative and open communicator, ready to share and receive feedback · Willing to dive into troubleshooting and help bring machines across the finish line · Honest, reliable, and committed to continuous improvement Take the Next Step in Your Career: If you are passionate about industrial electrical systems and automation, whether you are building your skills or bringing a wealth of experience, we want to hear from you. These roles offer the chance to work on meaningful projects with a stable, growing company where your contributions matter every day. Apply now to explore how you can be a part of building the next generation of industrial automation and electromechanical systems. Equal Opportunity Commitment: We and our client are equal opportunity employers and welcome all qualified applicants regardless of race, religion, gender, age, disability, veteran status, or any other protected classification.

Job DescriptionRole: Practice Lead & Physical Security Architect Duration: 90 day remote contract Location: Remote work from home with 20% travel Role OverviewArganteal is seeking a Physical Security Architect & Practice Lead for a 90 day contract to serve as a trusted strategic advisor and technical authority embedded with a premier global financial services client with a significant consumer banking footprint. This individual will function as the client’s principal technical partner—a right-hand resource to their physical security leadership—providing end-to-end architectural guidance across branch security technologies, surveillance infrastructure, and the underlying physical-layer networks that support them. The ideal candidate brings deep, hands-on expertise in enterprise-grade physical security systems deployed at scale across a geographically dispersed branch banking environment. This is a high-visibility, high-trust engagement requiring a practitioner who can operate with autonomy, navigate complex stakeholder landscapes, and drive both tactical execution and long-range technology roadmap development. Key ResponsibilitiesStrategic Advisory & Practice Leadership • Serve as the primary physical security architecture advisor to the client’s security leadership, functioning as a day-to-day strategic and technical partner across all branch security technology initiatives., • Develop and maintain a comprehensive physical security technology roadmap aligned with the client’s enterprise security strategy, regulatory obligations, and branch expansion or consolidation plans., • Lead practice-level activities including standards development, reference architecture creation, technology evaluation, and vendor assessment for physical security platforms and components., • Provide executive-level briefings, technical recommendations, and decision-support documentation to senior client stakeholders, including CISO and corporate security leadership.Branch Security Technology Architecture, • Architect, design, and provide technical oversight for branch surveillance systems including IP and analog camera systems, Digital Video Recorders (DVR), and Mobile Video Recorders (MVR)., • Define standards for camera placement, coverage mapping, resolution requirements, retention policies, and recording schedules across diverse branch typologies (full-service, drive-through, in-store, and standalone)., • Evaluate, recommend, and architect Video Management System (VMS) platforms, ensuring interoperability with existing enterprise security operations center (SOC) workflows and incident management processes., • Provide technical direction on emerging branch security technologies including video analytics, AI-driven threat detection, access control integration, and cloud-based surveillance platforms.Layer 1 Physical Network Infrastructure, • Provide expert-level guidance on Layer 1 wiring infrastructure supporting physical security networks, including specification, design, and modification of coaxial cable runs (RG-59, RG-6, and Siamese configurations)., • Define and enforce standards for proper electrical grounding and bonding of physical security systems in compliance with NEC, TIA/EIA, and client-specific requirements., • Spec, review, and approve cable pathway designs, termination standards, and signal integrity requirements for both new branch buildouts and retrofit/upgrade projects., • Collaborate with low-voltage contractors, general contractors, and client facilities teams to ensure Layer 1 installations meet architectural specifications and pass quality assurance inspections., • Troubleshoot and resolve signal degradation, grounding faults, and cable plant issues impacting surveillance system performance., • Provide supplemental Layer 2/Layer 3 network support for physical security systems as needed, including familiarity with VLANs, Power over Ethernet (PoE), and TCP/IP fundamentals as they relate to IP-based surveillance infrastructure.Team Leadership & Talent Development, • Manage, develop, and mentor a team of field service technicians, engineers, and supervisors supporting physical security operations across the client’s branch environment., • Conduct performance reviews, establish individual development plans, and deliver ongoing training programs to ensure technical staff maintain required certifications and competencies., • Lead recruiting, hiring, and onboarding efforts for technical staff as the practice scales to meet evolving client demand., • Foster a culture of accountability, continuous improvement, and technical excellence within the physical security practice.Operational Support, • May periodically oversee day-to-day operational activities including troubleshooting, maintenance coordination, and repair workflows for physical security systems as business needs require., • May support dispatching and scheduling of service technicians from time to time, particularly during peak deployment periods, system upgrades, or incident response scenarios., • Ensure compliance with company safety standards and established service procedures when engaged in operational oversight activities.Client Escalation & Relationship Management, • Serve as the primary escalation point for physical security–related service issues, ensuring timely resolution and clear communication with client stakeholders., • Monitor and ensure adherence to service level agreements (SLAs) specific to physical security system uptime, maintenance response, and incident resolution., • Maintain strong, trust-based relationships with key client contacts across corporate security, facilities, and branch operations leadership.Engagement Delivery & Collaboration, • Coordinate with internal teams including account leadership, project management, engineering, and supply chain to ensure seamless delivery of physical security solutions., • Produce and maintain detailed technical documentation including as-built diagrams, system architecture drawings, bill of materials, and standards guides., • Participate in site surveys, branch assessments, and periodic on-site reviews as part of the travel expectation (up to 20%). QualificationsRequired, • Minimum of 10 years of progressive experience in physical security technology architecture, design, and implementation within large-scale enterprise environments., • Demonstrated experience with enterprise surveillance systems including IP and analog cameras, DVR, NVR, and MVR technologies., • Hands-on expertise with Layer 1 wiring for physical security networks, including coaxial cable specification (RG-59, RG-6, Siamese), termination, testing, and modification of cable runs., • Strong working knowledge of proper electrical grounding and bonding practices for security infrastructure per NEC and TIA/EIA standards., • Experience with Video Management System (VMS) and integrated security platforms such as Genetec, Milestone, Avigilon, Honeywell, LenelS2, or Bosch., • Hands-on experience with access control systems, intrusion detection systems, and alarm monitoring platforms within enterprise environments., • Demonstrated ability to serve as a trusted advisor to senior client stakeholders in a consulting or staff augmentation capacity., • Bachelor’s degree in business, electronics, engineering, or a related field, or equivalent professional experience., • Must be a United States citizen currently residing on U.S. soil., • Ability to travel up to 20% domestically.Preferred, • Experience in the financial services or consumer banking industry, with specific knowledge of branch security requirements, regulatory considerations, and compliance frameworks (e.g., FFIEC, OCC guidance)., • Professional certifications such as PSP (Physical Security Professional), CPP (Certified Protection Professional), BICSI RCDD, or equivalent industry credentials., • Experience with structured cabling design and low-voltage systems beyond coaxial, including Cat6/6A for IP-based surveillance convergence., • Prior practice leadership or team lead experience in a professional services, consulting, or managed services context., • Knowledge of cloud-based and hybrid surveillance architectures, edge computing for video analytics, and bandwidth optimization strategies for distributed branch environments. Work Environment & Requirements, • This position is fully remote, open to candidates located anywhere within the United States., • Candidate must be a U.S. citizen physically located on U.S. soil at all times during employment., • Travel of up to 20% is expected, primarily for client site visits, branch assessments, and periodic in-person stakeholder engagements., • Standard working hours with flexibility to accommodate client time zones and periodic after-hours coordination as needed. Powered by JazzHR 7YptZVFDD0

Job Description A Great Opportunity for Growth within a Successful Company! Join one of the United States' most progressive and innovative construction, automation and engineering firms. EAD supports clients' projects on hundreds of systems in industrial manufacturing facilities specializing in food processing, pharmaceutical manufacturing and parcel handling. This opportunity will enable you to enjoy a fast-paced environment working on projects of all sizes and complexities. EAD is looking for a Staff Electrical Engineer to assist in providing engineering support for various industrial and commercial projects including: engineering calculations, power distribution, lighting design, controls design, and power analysis. Responsibilities • Prepare and modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable codes, accepted engineering practices and EAD standards, • Electrical design with primary responsibilities of power, lighting and grounding per client requirements, • Provide studies of power quality, short circuit, coordination, and arc flash hazard analysis, • Development of capital expenditure cost estimates for design/build projects, • Coordinating with other internal team members on multi-discipline projects, which often includes architects, mechanical, process, civil and structural engineers, • Work with designers and drafters to produce detailed designs, • Resolve design and development problems, • Work with a team to deliver quality construction documentation – specifications, schematics, power and lighting plans, one-lines, etc., • Interface with clients, utility companies, construction administrators, project team and vendors, • Participate in discipline-specific and company-wide business development, • Perform and document technical design reviews with other disciplines on the project team to produce the highest level of quality, • Responsible for adhering to all EAD's safety standards and practices, • B.S. Degree in Electrical Engineering from an accredited institution, • 6 years' experience in electrical design of industrial and commercial projects, • Licensed Professional Engineer certification, • Knowledge of electrical engineering fundamentals, • Knowledge of the NEC, NFPA, and IEEE standards, • Possess organizational skills, • Excellent written and verbal communication skills with clients and in-house support staff, • Proficient with Excel spreadsheets, • Strong attention to detail, • Self-starter with strong attention to detail, • Possess and able to maintain a valid driver's license, • Office, plant, or client site environment*, • Ability to sit and work at computer for extended periods of time, • Ability to walk up numerous flights of stairs/ladders multiple times a day and/or work in tight spaces in extreme conditions, • May work near moving mechanical parts and equipment*, • Office, Commercial and/or Industrial setting with the potential of exposure to fumes or airborne particles, toxic or caustic chemicals*, • Ability to lift and/or move up to 50 lbs.*, • Periodic weekend, holiday or evening work as needed We strongly believe that diversity of experience, perspectives, and background will lead to a better workplace for our employees and a better product for our customers and members. EAD is an Equal Opportunity Employer

Job Description Job Posting: Electrical Project Manager We are seeking an experienced Electrical Project Manager to lead the day-to-day coordination, financial performance, and execution of commercial electrical projects ranging from $50k to $2.5M. In this role, you will serve as the essential connection between field operations and administrative contractual requirements to ensure projects are delivered on time and within budget. Key Responsibilities • Financial & Operational Oversight: Manage project budgets, forecasting, billing, and cost tracking., • Scheduling & Procurement: Develop project schedules in coordination with the Superintendent and oversee the procurement of materials, equipment, and subcontractors., • Project Documentation: Execute project paperwork, including submittals, RFIs, and closeout documents, while maintaining organized logs., • Collaboration: Serve as the lead point of contact for General Contractors, owners, and design teams., • Compliance: Ensure contract compliance and maintain balanced project logistics with field progress. Qualifications, • 5+ years of experience as a Project Manager on commercial electrical projects within the $50k–$2.5M range., • Adept at reading and interpreting blueprints with a solid understanding of NEC and NYC electrical codes., • Computer-savvy, with proficiency in Microsoft Office and project management tools such as Procore, Autodesk, or Project Plan 365., • Exceptional communication skills and the ability to work collaboratively across various teams., • Previous electrical field experience is a bonus. Logistics & Benefits, • Compensation: $80,000–$110,000 annually., • Schedule: Full-time, Monday–Friday, 7am–3:30pm., • Location: This is a field-based role requiring a reliable commute to projects in all five NYC boroughs and New Jersey. You must be able to report to the Staten Island office 1–2 days per week., • Work Arrangement: No work-from-home or hybrid options are available., • Benefits: Includes an optional 401(k) plan; health insurance is not included but is negotiable.

Job Description Cable Technician - $20-$35/hr - DOE We are currently hiring Cable Technicians with 2+ years of experience performing low voltage cable installation in a commercial environment. Candidates are encouraged to apply ASAP as we have an immediate need in the New York Area. Please apply today by calling/texting Jason Talsky-Wiegand at 646-355-1821 or emailing your resume to or apply directly to this posting by clicking “Apply” below. Cable Technician Duties: · Pulling and routing CAT 5, CAT 6, CAT6A, etc. cable in a new construction commercial environment · Terminating phone jacks and dressing and terminating distribution frames (66 or 110 blocks, patch panels) · Installing support structures (ladders, racks, j-hooks) Cable Technician Requirements: · Recent experience performing low voltage / structured cabling installations in a commercial setting · Familiarity with BICSI, EIA, TIA, or NEC Standards · Rack and stack work, closet work, putting together server racks, patch panels · Fiber experience including Anaerobic Terminations, SC and LC Connectors, and Splicing is a huge plus · Ability to read and understand schematic and line diagrams · Your own basic telecom tools including punch downs, snips, wire strippers, cordless drill, PPE (safety gear), etc. Compensation: · Competitive starting pay $20 - $35/hr or depending on experience · Get paid weekly! · Option to enroll in Medical, Dental, Vision, and contribute to 401K · Referral Bonuses of up to $250 for referrals that result in a placement – simply click “REFER” below to share with a friend! Company DescriptionCrewforce specializes in placing low voltage and electrical talent across the nation and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status.Crewforce specializes in placing low voltage and electrical talent across the nation and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status.

Job Description Lead Cable Technician – $25–$40/hr (DOE) We are currently hiring Lead Cable Technicians with 5+ years of experience performing low voltage cable installations in commercial environments. This role is ideal for a hands-on leader who can run jobs, guide technicians, and ensure projects are completed safely, on time, and to industry standards. Immediate openings available in New York City. Please apply today by calling/texting Jery Almonte at 646-355-1825, emailing your resume to , or applying directly to this posting by clicking “Apply” below. Lead Cable Technician Responsibilities: • Lead and supervise crews performing structured cabling installations in commercial new construction and retrofit environments, • Pull, route, dress, and terminate CAT5, CAT6, CAT6A, and related low-voltage cabling, • Terminate phone jacks and dress/terminate distribution frames (66 & 110 blocks, patch panels), • Install and oversee support structures including ladder racks, equipment racks, j-hooks, and cable trays, • Perform rack & stack, IDF/MDF buildouts, server rack assembly, and patch panel installations, • Read, interpret, and execute work from blueprints, schematics, and line diagrams, • Coordinate daily tasks, enforce quality control, and ensure compliance with safety and industry standards, • Communicate effectively with project managers, site supervisors, and clients Lead Cable Technician Requirements: • 5+ years of commercial low voltage / structured cabling experience, • Proven experience leading crews or acting as a site lead, • Strong knowledge of BICSI, EIA, TIA, and NEC standards, • Experience with fiber installations including SC/LC connectors, anaerobic terminations, and splicing (highly preferred), • Ability to troubleshoot cabling issues and provide field solutions, • Must have own basic telecom tools (punch down tools, snips, wire strippers, cordless drill, PPE, etc.), • Strong organizational, communication, and leadership skills Compensation & Benefits: • Competitive pay: $25–$40/hr, depending on experience, • Weekly pay, • Medical, Dental, Vision, and Life Insurance options, • Referral bonuses up to $250 for successful placements If you want, I can also: • Tailor this specifically for union, data center, or enterprise work, • Shorten it for Indeed/ZipRecruiter, • Adjust pay language to match NYC market rates more aggressivelyCompany DescriptionCrewforce specializes in placing low voltage and electrical talent across the nation and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status.Crewforce specializes in placing low voltage and electrical talent across the nation and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status.

Job Description:\n\nAbout Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative, inclusive environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Critical Operations Engineer II Role: The Data Center Technician IV must possess an expert level of knowledge and will be responsible for the operational integrity and regulatory compliance of the data center electrical, mechanical, fire life safety systems, and communications infrastructure. We are currently hiring for the Swing Shift 3:00pm-11:30pm, Tuesday - Saturday. Mechanical responsibilities will include chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, and humidification systems. Electrical responsibilities will include electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load. Fire Life Safety responsibilities will include wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Communications Infrastructure responsibilities will include IFD / MDF / MMR management, structured cabling and supporting infrastructure ownership, and customer space management. This position will also be directly responsible for the processes that maximize customer uptime in the most cost-effective way by working very closely with the Data Center Manager. Technicians must ensure that data center problems are identified and repaired quickly, contractors deliver quality services, and internal customer demands are met. A Tier IV technician develops creative approaches to keep operational costs to a minimum, improve efficiency, and implement new strategies. Duties:Data center subject matter expert for electrical, mechanical, controls, and fire life safety systems.Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control. Tracking and trending operational characteristics. Mentoring of junior staff.Work with the site Data Center Manager to track and complete an aggressive preventive and predicative maintenance scheduleWork with and provides guidance, to the site Data Center Manager to determine maintenance requirements for mechanical and electrical systemsEnsure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction. Ideal candidate will have a demonstrated technical ability and innovative thinking cross functionally, including integrated systems and ITManage systems to avoid unplanned, customer-impacting outages Manage the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiencyProvide applied mechanical and integrated control expertise for the entire data centerWork as a primary knowledge expert in regard to fire and electrical codes.Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities.Assist Data Center Manager with the database management of maintenance discrepancies and work with Operations management to resolve site issues based on agreed upon priorities.Trouble Ticket ManagementWork Order Completion ProcessInfrastructure projects (Internal/Customer)Cage Build-OutsOverhead InstallationsRack and StackNavigate and utilize a CMMS system.Use developed procedures to solve problemsAssist in asset and consumable inventory management.Responsible for the tracking and proper labeling of all equipment per established procedures.Ensures that processes are completed in a timely manner pertaining to Service Level Agreements (SLA) and data is uploaded to the OSS accordingly.Provide physical security within the CoreSite premises.Provide day-to-day exceptional customer service and support.Incident escalation and report writingMonitor the building fire alarm system.Maintain and complete regular facility and security tours documenting and responding to found issues.Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and 8 Guiding Principles. Requirements Knowledge:Expert understanding of the electrical and mechanical systems used in a facility and data center environment, including, but not limited to the following: electrical distribution and layout, Transformers, PLC’s, Generators, Switchgear, UPS systems, STS’, ATS’ PDU’s, Chilled Water Systems, CRAC/CRAH’s, Pre-Action Sprinkler SystemsExpert knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safetyExpert knowledge of fiber optics / cabling infrastructure and industry best practices.Expert knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)Expert knowledge and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems Skills:Minimum of 5-7 years of experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including: Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, and Double Interlock Pre-Action SystemsProven leadership skillsProven expert and laying out, pulling, dressing, and terminating fiber and copper communications cabling.Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling.Excellent communication skills, both written and oral including Microsoft Suite (Word, Excel, PowerPoint, Project). Abilities:Ability to communicate effectively with customers and internal staff.Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems.Ability to learn quickly and address issues as they arise during normal working hours or after hours.Ability to operate in and promote a rigorous process-driven team environmentAbility to logically analyze and solve problemsAbility to effectively multi-task multiple projectsOperate Hand and Machine Tools (hammer, drill, saw, etc.)Operate electrical tools such as a multi-meter or infrared camera Education/Experience:Bachelor’s degree in Mechanical or Electrical Engineering or equivalent time in rate.5 or more years in a mechanical/electrical position within critical facilities (preference given to a data center, hospital, or power plant experience)Be able to pass an extensive background check, including criminal history, personal references, employment and education verifications, and Department of Motor Vehicle and credit check. Physical Demands and special requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand 1/3 – 2/3 of the timeAbility to walk 1/3 – 2/3 of the timeAbility to sit 1/3 – 2/3 of the timeAbility to climb and balance 1/3 – 2/3 of the timeAbility to stoop, kneel, crouch and crawl 1/3 – 2/3 of the timeAbility to reach with hands & arms 1/3 – 2/3 of the timeAbility to smell, talk & hearAbility to use hands to type, handle & feelAbility to reach with hands and armsAbility to see at close and distance ranges and the ability to see colorMust be comfortable working in a high stress, fast paced environment with shifting prioritiesMust be willing to work outside normal business hours, including weekends, late nights, holidays, and on-call supportAbility to lift up to 50 pounds 1/3 of the time Compensation: Compensation for this role includes a base salary between $43.00/hr and $47.00/hr. This role is also eligible for an annual bonus and equity, based upon individual and company performance. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week!First-day medical insurance through Cigna with generous premium cost coverageDental insurance through Delta DentalVision insurance through VSPTelemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the companyVoluntary coverage benefits for supplemental life, critical illness, accident, and hospital insuranceFirst-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company matchDiscretionary annual bonus and equity incentive planEmployee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO), 11 paid company holidays, and additional floating holidaysAdditional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave, and disability leaveFree parking or a company contribution toward a public transit pass Additional PerksWellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the familyWellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentivesTechnology Stipend: $100 monthly stipendEducational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per yearGiving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grantsFinancial Management: Access to financial coaching, digital tools, and services to manage and pay student loan debt quickerPet Insurance: Keep your furry friends healthy and happyFamily Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacyEmployee Assistance Program: 24x7 service to support family, work, money, health, legal and life challengesCounseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding careReferral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirementsDiscounts: Discounts, cash back offers, and perks on thousands of brandsLinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job Description Who we are! Vanderweil Engineers is a nationally recognized, top-ranked engineering firm specializing in MEP/FP and technology services. For 75 years, we've delivered innovative solutions across diverse sectors—including Science & Technology, Mission Critical, Academic, Healthcare, and Commercial. As one of the largest independently owned engineering firms in the U.S., our team of 500+ professionals operates from nine offices nationwide, bringing deep expertise and a commitment to excellence to every project. If you’re ready to grow your career alongside some of the brightest minds in the industry, we’d love to hear from you. We offer both stability and growth opportunities in today’s fast-changing environment. We are currently seeking a Senior Electrical Engineer to join our Power Group in our Boston office. As a Senior Electrical Engineer, who has some desire to work in medium voltage, power generation, renewable generation, district heating, data centers and heavy industrial projects to join our specialized Power group in our beautiful Boston, MA or NYC offices. Some of your Responsibilities include: • Responsible for detailed design of campus electrical grids serving industrial manufacturing sites, district utility providers, and college/university electrical distribution systems., • Design of power generation facilities, utility grid interconnections, switchgear and substations, generators, and power distribution network., • Execute electrical designs and deliverables for power engineering, cogeneration power plants, chiller plants, and large industrial projects., • Able to lead technical team and deliver design for various clients. Provide support to assigned staff on technical and administrative issues., • Maintains understanding of project schedule, status, and technical issues. Review all designs issued prior to client submission with supervisor and Department Head., • Maintains strong understanding of all associated Codes and Standards and ensure compliance in all Team activities., • Strong understanding of IEEE, IBC, NESC, and NEC electrical codes and knowledge of industry products and design solutions., • Knowledge of MS Excel, MS Word, AEC 3-D software such as Autodesk Revit or BIM 360 is desired., • Ability to perform system studies with industry software such as SKM ETAP, CYME, CDEGS, AMPCALC 4 for arc-flash, short circuit, grounding, relay settings, time current curves (TCC), voltage drop calculations, and motor starting analysis, is required., • Ability to work with design software calculation tools such as AGI-32, DIA Lux, or Visual for lighting power density is desired., • Strong analytical ability., • Strong verbal and written communication skills to provide presentations, interface with management and clients, attend meetings and produce written reports., • Minimum of 12+ years’ experience in related field of power generation and heavy industrial projects, medium voltage (5kV/34.5kV) and low voltage (480V) design of industrial and process plants., • Understanding of LV and MV Switchgear functionality, Motor Control Centers (MCCs) as well as Starters and VFDs., • Operations and Maintenance methods of design consideration desired., • Electrical Testing understanding desired., • CSI Specification knowledge and understanding required., • Bachelor’s Degree (BSEE) required. We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. Our wellness programs prioritize our team members’ physical and behavioral health. We are an equal opportunity employer committed to inclusion and diversity in the workplace. This is a high visibility role and the total compensation that we expect to pay for this position is dependent on years of experience, licensure, education and project portfolio but expected to be in the $150,000 to $200,000 range.

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at . About the Role: We are seeking an SME for Data Center Commission and Quality. This role demands direct knowledge of data center construction, with a strong focus on MEP systems. Working directly with CoreWeave project coordination members, you will ensure projects across the CoreWeave portfolio are completed on time and to the highest quality standards. Responsibilities include overseeing the installation and testing of components and systems, including mission-critical systems such as generators, UPS systems, electrical distribution equipment, redundancy protocols, and cooling systems such as chillers and CDUs. This is a remote-eligible position with 50% travel required. Candidates must reside in or near the Northern Virginia, Dallas, Richmond, Virginia, Livingston, New Jersey, or Atlanta, Georgia regions. What You'll Do: • Operate with safety at the forefront of all construction initiatives., • As necessary, collaborate with general contractors, trade partners, and vendors., • Serve as a liaison between clients and internal teams, facilitating communication during commissioning activities., • Review all written documentation, commissioning, and quality-related information., • Assist in developing, reviewing, and implementing commissioning plans as needed., • Assist in coordinating and attending pre-construction commissioning meetings., • Attend construction progress and pre-installation job-site meetings to gather relevant information., • Review meeting minutes for necessary revisions and assist in resolving design-intent discrepancies., • Inspect field installations and witness functional tests; conduct site visits as necessary., • Witness the execution of commissioning tests., • Travel to sites, client meetings, and training as required., • Participate in developing reports that define project progress, problems, and solutions for leadership teams and clients.Who You Are:, • 5+ years of experience in MEP (Mechanical, Electrical, and Plumbing) commissioning, with a preference for experience in data centers or critical facility environments., • Comprehensive understanding of data center infrastructure, including Building Management Systems (BMS), Electrical Power Monitoring Systems (EPMS), and complex MEP building systems., • Familiarity with local building codes and industry-standard frameworks, including NEC, NFPA, IEEE, and ASHRAE., • Proficiency in Microsoft Office Suite (Excel, Word, Outlook) and experience with industry-standard commissioning software or digital platforms., • Demonstrated ability to manage multiple projects simultaneously, maintaining high organizational standards and meeting strict project deadlines., • Self-directed professional with a proven track record of driving complex processes to completion and ensuring accountability across the project lifecycle., • Ability to develop and maintain effective professional relationships with contractors, clients, and cross-functional internal teams., • Direct experience in the coordination, commissioning, or quality assurance of electrical and low-voltage equipment., • Possession of a valid driver's license and a motor vehicle record that meets company insurability standards., • Willingness to travel up to 50% of the time and the ability to respond to emergency communications outside of standard business hours as required. At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $143,000 to $191,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility).. What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description:\n\nAbout Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Critical Operations Engineer I Role: The Data Center Technician III assists in the operational integrity, security, and regulatory compliance of the data center. The technician is to have a strong knowledge of telecommunications, mechanical, electrical, and life safety systems as well as data center operating procedures. We are currently hiring for the Night Shift 11:00pm-7:30am Sunday - Thursday A Tier III technician will be responsible for day to day operations of the data center including facilities and telecommunication infrastructure. The responsibilities are wide ranging and multi-disciplinary. Mechanical responsibilities will include working on chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, humidification systems, and central plant operations. Electrical responsibilities will include working on electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load including power circuit installations. Fire Life Safety responsibilities will include monitoring wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Telecommunications responsibilities will include cross connect installations, cabling infrastructure management, advanced remote hands support, and customer cage and cabinet build outs. Responsibilities will include customer infrastructure build-outs (cage builds, overhead installations, rack and stack), cable termination and testing, maintenance work, monitoring and responding to mechanical, electrical, fire protection, telecom, and security systems. These systems include, transformers, PLC’s, generators, switchgear, UPS systems, STS’, ATS’ PDU’s, chilled water systems, CRAC/CRAH, wet sprinkler systems and pre-action sprinkler, network equipment, transmission media, cabling infrastructure, security hardware, and CCTV. Duties:Completion of CoreSite’s Data Center Operations Qualification Program to the tier level at which you are hired within the first nine (9) months of employment.Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control.Tracking and trending operational characteristics.Provide feedback to management on the effectiveness of existing standards and processes.Works with contractors and consultants for all system expansions, corrections and upgradesWork with the senior technicians to track and complete an aggressive preventive and predicative maintenance schedule.Ensure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction as per CoreSite guidelines. Ideal candidate will have a demonstrated technical ability and innovative thinking cross functionally, including integrated systems and IT.Manage systems to avoid unplanned, customer-impacting outages.Navigate and utilize a CMMS system.Provide day-to-day exceptional customer service and support.Maintain and complete regular facility and security tours documenting and responding to found issues.Assist with the database management of maintenance discrepancies and work with to resolve site issues based on agreed upon priorities.Follow direction from data center management regarding the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiency.Trouble Ticket and Remote Hands ManagementFiber and Copper cabling terminationsCircuit path creation and verificationCoordinate and oversee power installations and upgradesWork Order Completion ProcessInfrastructure projects (Internal/Customer)Cage and Cabinet Build-OutsOverhead InstallationsRack and Stack Use developed procedures to solve problemsAssist in asset and consumable inventory management.Responsible for the tracking and proper labeling of all equipment per established procedures.Incident escalation, response, and follow-up report writingManage building service requests through resolution.Perform and complete work orders and customer service tickets in a timely mannerServe in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities.Adhere to and promote CoreSite’s Principles of Operational ExcellenceProvide applied mechanical and integrated control expertise for the entire data center. Requirements This position is required to interact with CoreSite personnel, vendors, partners, contractors and clients. KnowledgeFirm and proven understanding of the electrical and mechanical systems used in a data center environment.Firm and proven understanding of fiber optics / cabling infrastructure and industry best practices.Firm and proven understanding of Proficient knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safety Proficient knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations) Proficient and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems SkillsMinimum of 2 years experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including: Chilled Water SystemsLarge Centrifugal ChillersCooling TowersHeat ExchangersWater Treatment SystemsVFD’s and PumpsHVAC equipmentCRAC/CRAH’sHumidification SystemsBMS and PLC ControlsEmergency Standby Diesel Generator SystemsFuel/Oil systems, 480/277 and 208/120 electrical generation and distributionStatic UPS SystemsDouble Interlock Pre-Action SystemsCommunications cabling Cabling infrastructureNetwork infrastructure and hardwareExperience laying out, pulling, dressing, and terminating fiber and copper communications cabling.Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling.Proven leadership skillsExcellent communication skills, both written and oralSuite (Word, Excel, PowerPoint, Project) AbilitiesAbility to communicate effectively with customers and internal staff.Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems. Ability to learn quickly and address issues as they arise during normal working hours or after hours.Ability to operate in and promote a rigorous process-driven team environmentAbility to logically analyze and solve problemsAbility to effectively multi-task multiple projectsOperate Hand and Machine Tools (hammer, drill, saw, etc.)Operate electrical tools such as a multi-meter or infrared camera Education/ExperienceHigh School Diploma or greater2-5 years of experience in the data center industry Be able to pass an extensive background check, including criminal history, personal references, employment and education verification, and Department of Motor Vehicle and credit check. Physical Demands and Special Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand 1/3 – 2/3 of the timeAbility to walk 1/3 – 2/3 of the timeAbility to sit 1/3 – 2/3 of the timeAbility to climb and balance 1/3 – 2/3 of the timeAbility to stoop, kneel, crouch and crawl 1/3 – 2/3 of the timeAbility to reach with hands & arms 1/3 – 2/3 of the timeAbility to smell, talk & hearAbility to use hands to type, handle & feelAbility to reach with hands and armsAbility to see at close and distance ranges and the ability to see colorMust be comfortable working in a high stress, fast paced environment with shifting prioritiesMust be willing to work outside normal business hours, including weekends, late nights, holidays, and on-call supportAbility to lift up to 50 pounds 1/3 of the time Compensation: Compensation for this role includes a base salary between $38.00/hr and $40.00/hr. This role is also eligible for an annual bonus and equity, based upon individual and company performance. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week!First-day medical insurance through Cigna with generous premium cost coverageDental insurance through Delta DentalVision insurance through VSPTelemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the companyVoluntary coverage benefits for supplemental life, critical illness, accident, and hospital insuranceFirst-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company matchDiscretionary annual bonus and equity incentive planEmployee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO)11 paid company holidays and additional floating holidaysAdditional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave and disability leaveFree parking or a company contribution toward a public transit pass Additional PerksWellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the familyWellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentivesTechnology Stipend: $100 monthly stipend.Educational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per yearGiving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grantsFinancial Management: Access to financial coaching, digital tools and services to manage and pay student loan debt quickerPet Insurance: Keep your furry friends healthy and happyFamily Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacyEmployee Assistance Program: 24x7 service to support family, work, money, health, legal and life challengesCounseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding care.Referral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirementsDiscounts: Discounts, cash back offers and perks on thousands of brandsLinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Description We are seeking a Lead Transmission Line Engineer who will manage a collaborative and dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The successful candidate will serve as a Lead Engineer and Technical Project Manager on high voltage electric transmission line design projects of overhead and underground systems for some of the largest utilities in the country as well as regional utilities. The candidate will apply NESC, ASCE, ACI, NEC, and other applicable standards in the engineering and design of all types of capital and maintenance projects from 34.5 kV to 765 kV. Additionally, the candidate will direct a team of engineers that regularly perform engineering analyses, PLS-CADD modeling, structure loading calculations, foundation design using MFAD and/or LPILE, design structure framing and hardware assemblies, draft plans and specifications, and prepare bill of materials and procurement documents across project planning, engineering, environmental, permitting, and construction management phases. The successful candidate can expect a fast-paced, diverse work environment and flexible work hours/work arrangements as well as a manager and peers who will encourage career development and growth! In addition, the successful candidate will be involved in applying AI, automation, and digital design platforms to streamline grid modernization and increase design efficiency. This is a senior leadership role with primary responsibilities in client relations, staff management, proposal development, scope creation/change, project execution, and new business capture for the team’s full book of work. The successful candidate will be able to communicate clear expectations, goals, and vision; manage the performance of direct reports; motivate, coach, and mentor skilled professionals; and appropriately delegate project work. The candidate must be capable of managing collaboration and a positive team culture to achieve successful results. Location: This position is a hybrid work position with the potential for remote work for the right candidate located in Pennsylvania, Ohio, or West Virginia. Relocation assistance may be available for qualified candidates. The Challenge: • Direct multiple design teams simultaneously executing various projects and programs for multiple clients., • Develop a team of engineers by training, coaching, and nurturing Leidos’ engineering talent., • Supervise staff by approving timesheets and running the annual performance review process., • Participate proactively as a member of the leadership team of the Transmission Line Section., • Create responses to RFPs, RFIs, and RFQs from clients for new work, including proposal creation and definition of scope of work., • Possess a growth mindset to foster creative problem solving for our clients’ most complex issues., • Promote continuous improvement to develop streamlined processes and tools that facilitate improvements to departmental technical resources via innovation and automation., • Delegate tasks to staff, forecast and plan their future workload, and run recruiting activities to support aggressive growth goals., • Drive the quality control process for the execution team to ensure the highest level of quality in all deliverables., • Liaise with clients to maximize affinity, facilitate business development growth, and foster long-term relationship building., • Manage portfolio health by leveraging Project Managers to independently drive and monitor scope, schedule, and budget. Accountability for schedule compliance requires high awareness and support from assigned Lead Engineers. What Sets You Apart (Required): • Bachelor’s degree in Civil, preferred, or Mechanical Engineering with eight plus (8+) years of relevant experience in the design of high voltage electric utility transmission systems., • Expertise in PLS-CADD and PLS-POLE., • Engineer In Training (EIT) certification., • Work effectively in a team environment; can also work independently., • Track record of outstanding communication to serve as primary point of contact for existing and perspective clients., • Business acumen with a record of understanding and meeting key project performance metrics., • Working onsite in a Leidos or client office is a possibility; some periodic travel may be required., • Ability and passion to develop staff through mentoring. Favorable If You Have: • Two plus (2+) years of supervising staff., • M.S. degree in Structural Engineering., • Experience with TOWER., • P.E. certification or the ability to achieve P.E Certification in 6 months., • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus. Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PowerDelivery PDSTLINE If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. Original Posting:November 3, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $92,300.00 - $166,850.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit . Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at . Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at . If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job Description Who We Are! Vanderweil Engineers is a nationally recognized, top-ranked engineering firm specializing in MEP/FP and technology services. For 75 years, we've delivered innovative solutions across diverse sectors—including Science & Technology, Mission Critical, Academic, Healthcare, and Commercial. As one of the largest independently owned engineering firms in the U.S., our team of 500+ professionals operates from nine offices nationwide, bringing deep expertise and a commitment to excellence to every project. Join us to do the best work of your career as an Electrical Engineer at our Boston, MA headquarters OR Atlanta, GA OR Charlotte, NC or even NYC professional offices. (Hybrid schedule) As an Electrical Engineer, you will be designing the building infrastructure for large scale mission critical data center projects or unique projects involving EV & PV Distribution, clean rooms, labs, or commercial hi-rises with integrated sustainability. Expand your skillset and have a voice by working outside the box with the way we approach projects at Vanderweil. Some of your responsibilities include the following: Every Vanderweil Engineers team member brings something unique to the table. Here is what we are looking for with this role: • Working with electrical distribution equipment that includes generators, ATS and UPS., • Use Revit to model electrical systems., • Document design calculations and design path decisions., • Model electrical distribution systems with our analysis software., • Create specifications for basic projects., • Part of project team in the production of engineering solutions for large scale and complex building projects., • 5+ years of related experience, • Bachelor’s degree in Engineering or equivalent experience, • Revit knowledge is a plus, • Understanding of the NEC, IBC and IECC. We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. Our wellness programs prioritize our team members’ physical and behavioral health. We are an equal opportunity employer committed to equity and inclusion in the workplace. The total compensation that we expect to pay for this position is dependent on years of experience, licensure, education, geographic location, and project portfolio but expected to be in the $ 90,000 to $150,000 range.

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance Benefits 401K Dental Benefits Health Insurance Paid Time Off Qualifications Driver's license REQUIRED Journeymans Registration - REQUIRED Schedule 5 days/week - 40 hours/week +, with overtime pay (time and a half) after 40hrs. Job Type Full Time 12 months a year Pay $40 - $50.00 per hour - Starting rate is negotiable; pay rate is based upon construction experience.

Job Description Information and Communications Technology / Low Voltage Systems Designer Locations: New York City Company: Code Consultants Inc. (CCI) Build Your Career with CCI and Make a Difference! Are you an experienced ICT/Low Voltage Systems Designer looking for a rewarding career where you can take pride in your work and contribute to high-impact projects? At CCI, we offer the opportunity to grow both professionally and personally while working on notable projects across the country. Learn more about our work at Why Choose CCI? At CCI, we value our team members and continuously strive to create a positive work environment and opportunities for career advancement. Our team is proud of the amazing work we do, and we offer: • Competitive Salaries based on experience and expertise., • Performance-based Bonus Program that rewards exceptional contributions., • **Full-Time Work with Hybrid Remote Scheduling after the first 6 months for better work-life balance., • 401(k) Retirement Plan with company matching., • Outstanding Medical and Dental Plans to support your well-being., • Company-paid Vision and Short-Term Life Insurance., • Generous Paid Time Off-up to 4 weeks during your first year., • 10 Paid Holidays annually., • Growth Potential to senior-level positions within CCI. About the Role: Information and Communications Technology / Low Voltage Systems Designer As an ICT/Low Voltage Systems Designer at CCI, you'll play a key role in designing cutting-edge communication and low voltage systems. Your responsibilities will include: • Designing ICT systems including voice/data-CU/FO & OSP cable plants, RF design for DAS, Wi-Fi, TIA/BICSI/NEC infrastructure and grounding, AV, ESS, digital signage, and more., • Collaborating with CCI team members, clients, and interfacing with Building/Fire Officials., • Supporting Project Managers by contributing to project planning and execution., • Contributing to the Growth and development of your office and CCI, as a whole., • Traveling throughout the U.S. and Canada as needed to meet project requirements. Qualifications: Ideal candidates will bring the following: • 3-5 years or more of experience in ICT design and/or consulting., • A related technical or engineering degree., • BICSI RCDD credential., • Working knowledge of AutoCAD and Revit software., • Strong critical thinking skills to solve technical and functional problems., • Excellent organizational and communication skills., • A solid understanding of industry standards and codes related to ICT systems., • Motivation for growth and the drive to contribute to the success of CCI and its clients. About CCI: Founded in 1973, Code Consultants Inc. (CCI) is a leading fire protection engineering and life safety consulting firm. Our multidisciplinary team of over 100 professionals includes fire protection engineers, architects, and engineers from various disciplines. CCI offers a wide range of services including: • Fire protection engineering and life safety consulting., • Fire sprinkler and fire alarm design., • Building and fire code consulting., • Information and communications technology design., • Hazardous materials analysis, mass notification design, and more. Join our talented team in shaping the future of communication systems and delivering innovative, client-focused solutions. Apply Today! Ready to take the next step in your career? Submit your resume and cover letter via the "Apply Now" button on this page. Learn more about our impactful work at . EEO Statement: Code Consultants Inc. is an EEO/AA Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or veteran status.

Job Description Outside Sales Representative - Security and Fire Protection Systems Provider - Total Compensation to 130k/year - New York City, NY • Our client is a family owned, full-service fire protection and security services company that has been around since 1930. They sell, install, and inspect/maintain alarm systems, access control, suppression systems, SCBA, gas detection, sprinkler systems, CCTV, fire extinguishers, etc. Their potential client base is anyone with a physical business location, and they provide one time and recurring services for commercial, municipal, and especially industrial customers throughout New York, New Jersey, and Pennsylvania., • Drive net-new revenue across fire protection and security service lines through proactive prospecting, • Hunt for new business within the NYC territory using multi-channel outreach, • Generate leads, qualify prospects, and secure appointments with decision-makers, • Present and sell full portfolio of solutions including fire alarms, sprinklers, suppression systems, monitoring, access control, CCTV/video, intrusion, inspections & testing contracts, • Conduct on-site walkthroughs and system assessments to identify compliance, security vulnerabilities, and upgrade opportunities, • Maintain an organized funnel and pipeline strategy to ensure consistent opportunity creation, • Log all communication, appointments, quotes, and follow-ups inside CRM for transparency and accountability, • Prepare and deliver proposals for inspections, maintenance, monitoring agreements, retrofits, and new system installations, • Follow up persistently on aging quotes, open opportunities, and competitive bids until closed-won or closed-lost, • Leverage professional networks, chamber events, trade associations, safety groups, and community relationships for lead generation, • Build relationships with facility managers, business owners, general contractors, EHS/Safety teams, property managers, IT/security directors, and AHJs, • Coordinate with operations, design, and engineering to scope projects and ensure seamless handoff of awarded work, • Develop strong knowledge of code compliance (NFPA, IBC, NEC), AHJ requirements, and industry standards for both fire and security, • Attend industry events, trade shows, and technology demonstrations to stay up to date on evolving solutions and market needs, • Meet and exceed established KPIs including outbound call volume, LinkedIn outreach, in-person touches, new meetings set, and proposal output, • Hit sales quotas consistently through disciplined prospecting cadence, strong closing ability, and ongoing funnel management, • Uphold a high level of professionalism, urgency, integrity, and consultative problem-solving in every interaction, • Prior experience in the security or fire protection industry required, • Outside sales experience required, • Ability to travel to customer sites throughout the Five Boroughs, • Excellent communication and negotiation skills, self-motivated, • Ability to obtain security clearance for site visits, • Total compensation for this position consists of a base salary in the 75k - 85k/year range, plus commission; estimated first year on target earnings of 120k - 130k/year, • Uncapped commission, • Medical insurance, • 401k with 3% employer contribution (safe harbor), • 3 weeks PTO, • Car allowance or travel/public transit reimbursement #INDALL

Job Description About US Vanderweil Engineers is a top ranked national full-service engineering firm specializing in MEP/FP, and technology services. Working in multiple sectors including Mission Critical Data Centers, Science & Technology, Academic, Healthcare and Commercial buildings. For over 75 years with a staff of 500+ located across nine offices, we are proud to be one of the leading independently owned engineering firms in the country. We offer mentorship, growth and stability in an ever-changing volatile environment. Join us to do the best work of your career as an Electrical Engineer on our growing team in either our Newark, NJ or our Philadelphia, PA office. What You will Achieve We are looking for an Electrical Engineer with 5+ years of experience in electrical consulting Engineering field to join Vanderweil as an Electrical Engineer. You will be involved in: • Work with Sr. Engineers and Project Managers to understand project goals and requirements, • Participate in meetings / discussions with the team members, including the owner, project architect, and other internal and external project disciplines., • Part of project team in designing the building infrastructure, including medium Voltage and Low Voltage electrical service, main electrical distribution equipment, building distribution equipment., • Document design calculations and design path decisions., • Model electrical distribution systems with our analysis software., • Perform electrical load calculations and electrical engineering studies., • Use Revit to model electrical systems is a plus., • 6+ years of related experience, • FE and or PE preferred, • Bachelor’s degree in Engineering, • Revit knowledge is a plus, • Understanding of the NEC, IBC and IECC. We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. We prioritize wellness with programs that support physical and behavioral health, and we’re proud to foster an equitable and inclusive workplace. Learn more about our culture at . The compensation that we expect to pay for this position is commensurate with years of experience, project portfolio, geographic location, professional licensure and education and is expected to range in the $95,000 to $140,000 range.

Job Description About CP Engineers With over 40 years of industry leadership, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our diverse portfolio spans private, municipal, county, and regional clients—many of whom have partnered with us for decades. Join a fast-growing team dedicated to technical excellence, client satisfaction, and professional growth. Remote work flexibility, competitive compensation and benefits, and a supportive culture have helped CP earn Best Places to Work in NJ awards for three years straight and have driven strong employee retention. Position Overview: CP Engineers is seeking a highly skilled Senior Electrical Engineer to provide technical leadership and mentorship within our electrical engineering team. This role is responsible for developing project scopes, preparing budget estimates, and overseeing electrical design work to ensure the delivery of high quality, accurate, and consistent engineering outputs across the organization. The Senior Electrical Engineer will review, sign, and seal electrical drawings and will also contribute hands on design support as required. Project work may include electrical and control systems for commercial and industrial buildings, water and wastewater pump stations, treatment facilities, and various municipal infrastructure projects. Technical & Design Responsibilities: • Lead electrical engineering design for power distribution, lighting, energy, communications, fire alarm, and control systems across commercial, industrial, municipal, and infrastructure projects., • Prepare and seal engineering drawings, specifications, load calculations, fault current analyses, and arc‑flash studies in accordance with state PE requirements., • Oversee electrical system modeling using industry-standard software (e.g., SKM, ETAP, EasyPower, or equivalent)., • Review and approve design documents produced by EITs, junior engineers, and CAD/BIM staff., • Ensure all plans comply with IBC, NEC, IEEE standards, NFPA codes, local building codes, and utility service requirements., • Assist with P&ID development, • Develop process control schematics, • Must have experience working with HVAC equipment, generators and ATS, switchgears, transformers, and fire alarm systems, • SCADA and PLC development and programming a plus, • Panel design experience a plus, • Serve as the electrical discipline lead on multi‑disciplinary project teams, coordinating closely with mechanical, structural, civil, and water resources groups., • Develop complete plan sets, technical specifications, and bid/construction documents., • Support construction-phase services: respond to RFIs, review submittals, conduct field inspections, issue punch lists, and prepare site visit reports., • Maintain compliance with firm-wide QA/QC procedures., • Review design deliverables for technical accuracy, constructability, and regulatory compliance., • Verify that designs meet safety, reliability, maintainability, and operational requirements., • Meet with clients to define project scope, requirements, and technical expectations., • Provide technical guidance, recommendations, and solutions during planning and project execution., • Support proposal writing, project budgeting, and electrical scope development., • Provide technical mentorship to junior electrical engineers, EITs, and designers., • Support staff development through training on codes, design standards, and best practices., • Oversee workload distribution, task assignments, and schedule adherence for electrical discipline tasks. Compensation: $115,000-$145,000 Requirements • Degree in Electrical Engineering or equivalent from an accredited university., • Maintain active Professional Engineer (PE) license in NJ (or ability to obtain via reciprocity)., • Minimum 7-10 years of electrical engineering experience, with a track record of leading, mentoring, or supervising other engineers., • Represent the firm at industry events, technical conferences, or professional association meetings as needed, • Excellent ability to review and critique designs and provide constructive guidance., • Strong verbal and written communication skills, high attention to detail, and the ability to work collaboratively in a team environment., • Understanding of construction processes and field coordination, with the ability to support field engineers when necessary., • A valid driver’s license and dependable transportation., • Flexible Work Options: Hybrid/remote work arrangements, • Work/Life Balance: Flexible hours, 20 days paid time off, • Financial Security: 401(k) with 4% company match, • Professional Growth: Tuition reimbursement, professional license and association fee coverage, • Comprehensive Health: Medical, dental, and vision insurance, • Supportive Culture: Commitment to employee well-being and career development

Job Description A Great Opportunity for Growth within a Successful Company! Join one of the United States' most progressive and innovative construction, automation and engineering firms. EAD supports clients' projects on hundreds of systems in industrial manufacturing facilities specializing in food processing, pharmaceutical manufacturing and parcel handling. This opportunity will enable you to enjoy a fast-paced environment working on projects of all sizes and complexities. EAD is looking for an Associate Electrical Engineer to assist in providing engineering support for various industrial and commercial projects including: engineering calculations, power distribution, lighting design, controls design, and power analysis. Responsibilities • Prepare and modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable codes, accepted engineering practices and EAD standards, • Electrical design with primary responsibilities of power, lighting and grounding per client requirements, • Provide studies of power quality, short circuit, coordination, and arc flash hazard analysis, • Development of capital expenditure cost estimates for design/build projects, • Coordinating with other internal team members on multi-discipline projects, which often includes architects, mechanical, process, civil and structural engineers, • Work with designers and drafters to produce detailed designs, • Resolve design and development problems, • Work with a team to deliver quality construction documentation – specifications, schematics, power and lighting plans, one-lines, etc., • Interface with clients, utility companies, construction administrators, project team and vendors, • Participate in discipline-specific and company-wide business development, • Perform and document technical design reviews with other disciplines on the project team to produce the highest level of quality, • Responsible for adhering to all EAD's safety standards and practices, • B.S. Degree in Electrical Engineering from an accredited institution, • 3 years' experience in electrical design of industrial and commercial projects, • P.E., F.E. or commitment to obtain F.E. within first 12 months required with desire to obtain Licensed Professional Engineer certification, • Knowledge of electrical engineering fundamentals, • Possess organizational skills, • Excellent written and verbal communication skills with clients and in-house support staff, • Proficient with Excel spreadsheets, • Strong attention to detail, • Self-starter with strong attention to detail, • Possess and able to maintain a valid driver's license, • Office, plant, or client site environment*, • Ability to sit and work at computer for extended periods of time, • Ability to walk up numerous flights of stairs/ladders multiple times a day and/or work in tight spaces in extreme conditions, • May work near moving mechanical parts and equipment*, • Office, Commercial and/or Industrial setting with the potential of exposure to fumes or airborne particles, toxic or caustic chemicals*, • Ability to lift and/or move up to 50 lbs.*, • Periodic weekend, holiday or evening work as needed We strongly believe that diversity of experience, perspectives, and background will lead to a better workplace for our employees and a better product for our customers and members. EAD is an Equal Opportunity Employer

Job Description Join a fast-growing MEP consulting firm in Central New Jersey that’s making serious moves across commercial, healthcare, and institutional projects. We’re looking for an Electrical MEP Engineer with 3+ years of experience who’s ready to step into a hands-on role supporting power distribution, lighting design, and coordination with multidisciplinary teams. What You’ll Do: • Design electrical systems including power distribution, lighting, and low-voltage systems, • Perform load calculations, panel schedules, and equipment sizing, • Collaborate with MEP teams, architects, and clients to deliver coordinated designs, • 3+ years of electrical MEP design experience, • Proficiency in Revit and AutoCAD, • Working knowledge of NEC and industry standards, • Exposure to diverse, high-impact projects, • Clear path for growth into Project Engineer/Manager roles, • Flexible hybrid schedule + strong compensation package #midsenior #CivilMEP #li-hybrid Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job Description:\n\nAbout Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative, inclusive environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Critical Operations Engineer II Role: The Data Center Technician IV must possess an expert level of knowledge and will be responsible for the operational integrity and regulatory compliance of the data center electrical, mechanical, fire life safety systems, and communications infrastructure. We are currently hiring for the Day Shift 7:00am-3:00pm, Monday - Friday. Mechanical responsibilities will include chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, and humidification systems. Electrical responsibilities will include electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load. Fire Life Safety responsibilities will include wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Communications Infrastructure responsibilities will include IFD / MDF / MMR management, structured cabling and supporting infrastructure ownership, and customer space management. This position will also be directly responsible for the processes that maximize customer uptime in the most cost-effective way by working very closely with the Data Center Manager. Technicians must ensure that data center problems are identified and repaired quickly, contractors deliver quality services, and internal customer demands are met. A Tier IV technician develops creative approaches to keep operational costs to a minimum, improve efficiency, and implement new strategies. Duties:Data center subject matter expert for electrical, mechanical, controls, and fire life safety systems.Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control. Tracking and trending operational characteristics. Mentoring of junior staff.Work with the site Data Center Manager to track and complete an aggressive preventive and predicative maintenance scheduleWork with and provides guidance, to the site Data Center Manager to determine maintenance requirements for mechanical and electrical systemsEnsure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction. Ideal candidate will have a demonstrated technical ability and innovative thinking cross functionally, including integrated systems and ITManage systems to avoid unplanned, customer-impacting outages Manage the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiencyProvide applied mechanical and integrated control expertise for the entire data centerWork as a primary knowledge expert in regard to fire and electrical codes.Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities.Assist Data Center Manager with the database management of maintenance discrepancies and work with Operations management to resolve site issues based on agreed upon priorities.Trouble Ticket ManagementWork Order Completion ProcessInfrastructure projects (Internal/Customer)Cage Build-OutsOverhead InstallationsRack and StackNavigate and utilize a CMMS system.Use developed procedures to solve problemsAssist in asset and consumable inventory management.Responsible for the tracking and proper labeling of all equipment per established procedures.Ensures that processes are completed in a timely manner pertaining to Service Level Agreements (SLA) and data is uploaded to the OSS accordingly.Provide physical security within the CoreSite premises.Provide day-to-day exceptional customer service and support.Incident escalation and report writingMonitor the building fire alarm system.Maintain and complete regular facility and security tours documenting and responding to found issues.Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and 8 Guiding Principles. Requirements Knowledge:Expert understanding of the electrical and mechanical systems used in a facility and data center environment, including, but not limited to the following: electrical distribution and layout, Transformers, PLC’s, Generators, Switchgear, UPS systems, STS’, ATS’ PDU’s, Chilled Water Systems, CRAC/CRAH’s, Pre-Action Sprinkler SystemsExpert knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safetyExpert knowledge of fiber optics / cabling infrastructure and industry best practices.Expert knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)Expert knowledge and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems Skills:Minimum of 5-7 years of experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including: Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, and Double Interlock Pre-Action SystemsProven leadership skillsProven expert and laying out, pulling, dressing, and terminating fiber and copper communications cabling.Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling.Excellent communication skills, both written and oral including Microsoft Suite (Word, Excel, PowerPoint, Project). Abilities:Ability to communicate effectively with customers and internal staff.Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems.Ability to learn quickly and address issues as they arise during normal working hours or after hours.Ability to operate in and promote a rigorous process-driven team environmentAbility to logically analyze and solve problemsAbility to effectively multi-task multiple projectsOperate Hand and Machine Tools (hammer, drill, saw, etc.)Operate electrical tools such as a multi-meter or infrared camera Education/Experience:Bachelor’s degree in Mechanical or Electrical Engineering or equivalent time in rate.5 or more years in a mechanical/electrical position within critical facilities (preference given to a data center, hospital, or power plant experience)Be able to pass an extensive background check, including criminal history, personal references, employment and education verifications, and Department of Motor Vehicle and credit check. Physical Demands and special requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand 1/3 – 2/3 of the timeAbility to walk 1/3 – 2/3 of the timeAbility to sit 1/3 – 2/3 of the timeAbility to climb and balance 1/3 – 2/3 of the timeAbility to stoop, kneel, crouch and crawl 1/3 – 2/3 of the timeAbility to reach with hands & arms 1/3 – 2/3 of the timeAbility to smell, talk & hearAbility to use hands to type, handle & feelAbility to reach with hands and armsAbility to see at close and distance ranges and the ability to see colorMust be comfortable working in a high stress, fast paced environment with shifting prioritiesMust be willing to work outside normal business hours, including weekends, late nights, holidays, and on-call supportAbility to lift up to 50 pounds 1/3 of the time Compensation: Compensation for this role includes a base salary between $43.00/hr and $47.00/hr. This role is also eligible for an annual bonus and equity, based upon individual and company performance. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week!First-day medical insurance through Cigna with generous premium cost coverageDental insurance through Delta DentalVision insurance through VSPTelemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the companyVoluntary coverage benefits for supplemental life, critical illness, accident, and hospital insuranceFirst-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company matchDiscretionary annual bonus and equity incentive planEmployee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO), 11 paid company holidays, and additional floating holidaysAdditional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave, and disability leaveFree parking or a company contribution toward a public transit pass Additional PerksWellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the familyWellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentivesTechnology Stipend: $100 monthly stipendEducational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per yearGiving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grantsFinancial Management: Access to financial coaching, digital tools, and services to manage and pay student loan debt quickerPet Insurance: Keep your furry friends healthy and happyFamily Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacyEmployee Assistance Program: 24x7 service to support family, work, money, health, legal and life challengesCounseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding careReferral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirementsDiscounts: Discounts, cash back offers, and perks on thousands of brandsLinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job Description About Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. *This is not the official job application; this posting is specifically for CoreSite SkillBridge program. Please note that this program is exclusively for Military Spouse Fellows or Active-duty US military personnel transitioning out of the military to civilian workforce. SkillBridge Data Center Technician Role: The SkillBridge Data Center Technician assists in the operational integrity, security, and regulatory compliance of the data center. The technician will gain working knowledge of data center operations including telecommunications, mechanical, electrical, and fire life safety systems as well as data center operating procedures. The technician will be responsible for day-to-day operations of the data center including facilities and telecommunication infrastructure. The responsibilities are wide ranging and multi-disciplinary. Mechanical responsibilities will include working on chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, humidification systems, and central plant operations. Electrical responsibilities will include working on electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load including power circuit installations. Fire Life Safety responsibilities will include monitoring wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Telecommunications responsibilities will include cross connect installations, cabling infrastructure management, advanced remote hands support, and customer cage and cabinet build outs. Other responsibilities will include customer infrastructure build-outs (cage builds, overhead installations, rack and stack), cable termination and testing, maintenance work, monitoring and responding to mechanical, electrical, fire protection, telecom, and security systems. These systems include, transformers, PLC’s, generators, switchgear, UPS systems, STS’, ATS’ PDU’s, chilled water systems, CRAC/CRAH, wet sprinkler systems and pre-action sprinkler, network equipment, transmission media, cabling infrastructure, security hardware, and CCTV. Duties: • Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control., • Completion of CoreSite’s Data Center Operations Qualification Program., • Ensure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction as per Coresite guidelines., • Manage systems to avoid unplanned, customer-impacting outages., • Follow direction from data center management regarding the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiency., • Work with contractors and consultants for all system expansions, corrections and upgrades., • Work with the senior technicians to track and complete an aggressive preventive and predicative maintenance schedule., • Assist with the database management of maintenance discrepancies and work with to resolve site issues based on agreed upon priorities., • Trouble ticket and remote hands management., • Fiber and Copper cabling terminations., • Circuit path creation and verification., • Coordinate and oversee power installations and upgrades., • Complete work orders., • Infrastructure projects including cage and cabinet build-outs, overhead installations, and rack and stack., • Navigate and utilize a CMMS system., • Use developed procedures to solve problems., • Assist in asset and consumable inventory management., • Tracking and trending operational characteristics., • Tracking and proper labeling of all equipment per established procedures., • Provide day-to-day exceptional customer service and support., • Incident escalation, response, and follow-up report writing., • Maintain and complete regular facility and security tours documenting and responding to found issues., • Manage building service requests through resolution., • Perform and complete work orders and customer service tickets in a timely manner., • Provide applied mechanical and integrated control expertise for the entire data center., • Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities., • Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and Core Values. Requirements Knowledge, Skills, and Abilities: Interaction with Others -This position is required to interact with CoreSite personnel, vendors, partners, contractors and clients. Work Attributes: Knowledge- • Firm and proven understanding of the electrical and mechanical systems used in a data center environment., • Firm and proven understanding of fiber optics / cabling infrastructure and industry best practices., • Firm and proven understanding of Proficient knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safety., • Proficient knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)., • Proficient and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems. Skills- • Minimum of 2 years experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including:, • Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, Double Interlock Pre-Action Systems, Communications cabling, Cabling infrastructure, Network infrastructure and hardware., • Experience laying out, pulling, dressing, and terminating fiber and copper communications cabling., • Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling., • Proven leadership skills, • Excellent communication skills, both written and oral, • Proficient with Microsoft Office (Word, Excel, PowerPoint) Abilities - • Ability to communicate effectively with customers and internal staff., • Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems., • Ability to learn quickly and address issues as they arise during normal working hours or after hours., • Ability to operate in and promote a rigorous process-driven team environment, • Ability to logically analyze and solve problems, • Ability to effectively multi-task multiple projects, • Operate Hand and Machine Tools (hammer, drill, saw, etc.), • Operate electrical tools such as a multi-meter or infrared camera Education/Experience- • Military service members eligible for the DoD SkillBridge Program, • High school diploma or general education degree (GED) Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week! • First-day medical insurance through Cigna with generous premium cost coverage, • Dental insurance through Delta Dental, • Vision insurance through VSP, • Telemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the company, • Voluntary coverage benefits for supplemental life, critical illness, accident, and hospital insurance, • First-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company match, • Discretionary annual bonus and equity incentive plan, • Employee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO)11 paid company holidays and additional floating holidays, • Additional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave and disability leave, • Free parking or a company contribution toward a public transit pass Additional Perks, • Wellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the family, • Wellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentives, • Technology Stipend: $100 monthly stipend., • Educational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per year, • Giving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grants, • Financial Management: Access to financial coaching, digital tools and services to manage and pay student loan debt quicker, • Pet Insurance: Keep your furry friends healthy and happy, • Family Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacy, • Employee Assistance Program: 24x7 service to support family, work, money, health, legal and life challenges, • Counseling and Caregiving, • Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding care., • Referral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirements, • Discounts: Discounts, cash back offers and perks on thousands of brands, • LinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Technical Sales Manager - Southeast Who we are: Atkore is forging a future where our employees, customers, suppliers, shareholders, and communities are building better together - a future focused on serving the customer and powering and protecting the world. With a global network of manufacturing and distribution facilities, Atkore is a leading provider of electrical, safety and infrastructure solutions. Who we are looking for: We are currently searching for a Technical Sales Manager to be based out of the Northeastern region of the U.S. Reporting to the Regional Vice President of Sales, this person will be responsible for generating specifications and preferences with a focus on end-users, Specifiers, and Electrical Contractors. In addition, this person will drive continued growth for our product portfolio through distributors. The ideal candidate will reside in the VA, MD, DE, NJ, NY, or Eastern PA area, have a bachelor's degree along with a minimum of 5 to 10 years of proven electrical industry or related experience. What you'll do: • Generate project specifications with a focus on end-users, Specifiers, and Electrical Contractors., • Liaise with the local Regional Sales Manager to ensure projects are progressed and secured via the Electrical Distribution channel with the emphasis on maximizing profitable revenue growth., • Conduct new product presentations and inform customers of new product developments and industry code changes., • Progress leads supplied from various sources such as, but not limited to, Dodge, PEC, Web., • Site Visits to identify new opportunities and discuss projects with consultants and contactors., • Develop strong internal relationships with BU product marketing, technical, and customer service departments., • Attain sales targets for the area with the contribution to the regional sales targets., • Work with Atkore agent sales network to drive project growth and specifications to deliver profitable top line revenue growth required to meet/exceed BU goals., • Demand creation of existing, proprietary, and new products at Electrical Contractor level., • Educate and train Distribution on products, including lunch and learns, demonstrations, and job site visits., • Enter, track, manage, and report on projects, opportunities, and territory sales plans using Salesforce.com and other tools as needed., • Attend trade shows and conferences as needed., • Manage travel & entertainment expenses in a timely and efficient manner., • Profile and report on competitive market intelligence, including strengths and weakness. Consistently report VOC back to the BU product management teams to help drive Atkore Innovation initiatives., • Ensure that the Agency Reps are trained and focused on our Innovation initiatives., • Assist in the evaluation and processing of field quality complaints and return., • Bachelor's Degree Required, • Must have a minimum 5-10 years of proven electrical industry or related experience., • Must be willing and able to work remotely and travel at least 80% of the time., • Should reside in the general area of VA, MD, DE, NJ, NY, or Eastern PA area, • Excellent communication, negotiation, presentation and analytical skills., • Excellent computer skills with proficiency in the use of Salesforce.com and Microsoft Office applications., • Must have experience working with electrical contractors and working knowledge of the NEC., • A strong electrical and / or mechanical technical background., • Experience within a sales-orientated environment- electrical or specification sales., • A proven record of accomplishment of succeeding against set targets., • Complete your new hire "Immersion" to understand Atkore's Culture and Values., • Also through "Immersion," will make connections with colleagues you will be working with throughout Atkore, • Be able to navigate Atkore systems, for example, Salesforce, Concur Expense & Travel, Cyber Security, Atkore University, Atkore Rep Portal, Literature Portal, and UltiPro HR Portal., • Understand the business well enough to own and drive sales activities with the assistance of internal support and Atkore Reps., • Have had enough product training to begin delivering product presentations to Electrical Contractors and Engineers., • Identify additional ACE Contractors within your Region, • Be able conduct all available Certified Installer Trainings for Contractors, • Know all of your Atkore Strategic Agents in your Region, • Complete specifications reviews with Engineering Firms in your Region for all of Atkore Electrical Products (EP). Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $121,520 - $167,090. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: • Medical, vision, and dental insurance, • Life insurance, • Short-term and long-term disability insurance, • 401k, • Paid Time Off, • Paid holidays Applications are being accepted on an ongoing basis. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Job DescriptionEarn up to $50 per lesson coaching lacrosse on your schedule STXZ is hiring experienced lacrosse coaches to join the nation's #1 private lacrosse training marketplace. You run your own independent coaching business, we bring you local clients. About STXZ STXZ is a technology platform that connects families with independent lacrosse coaches across the United States. We're the marketplace that sends you clients in your area, handles the administrative work, and gets out of your way so you can coach. If you know lacrosse and want to turn your experience into income on your own terms, this is for you. How It Works You operate as a 1099 independent contractor, a business owner, not an employee. When a family in your area requests lessons through STXZ, we send you a Client Offer with the details. You review it and decide whether to take it. No quotas, no pressure, no penalty for declining. When you accept: * You contact the client directly within 24 hours * You and the client agree on schedule and location (their home, a local field, a park, your call) * You run the session your way, drills, pacing, structure are all your professional judgment * You submit a quick lesson briefing on the platform after the session * You get paid STXZ never tells you how to coach, what drills to use, or how to structure your lessons. That's your professional domain. What You Earn * Flat per-lesson rate: typically $35–$50 per 1-hour session. Rates are set by STXZ and may vary by market, region, and demand. * Fast payouts: 24–48 hours after submitting your lesson briefing • Receive payment via PayPal fast! 1099-NEC issued at year-end if you earn $2,000+ through the platform You're paid only for completed sessions you brief. What you earn is what you coach. What You Control * Your schedule. Work when you want. Pause availability anytime. * Your clients. Accept or decline every offer without penalty or impact on your standing. * Your methods. Drills, lesson plans, teaching style, all yours. * Your territory. Set your own travel radius. * Your business. You decide what equipment to bring and how to invest in your operation. What STXZ Handles * Client acquisition. We market the platform and bring families to you. * Matching. We send you local client offers that fit your profile. * Payment processing. We collect from clients and pay you after each session. * Billing, refunds, disputes. Our support team handles all of it, you coach. * Platform-level liability coverage. After completing onboarding and paying a small insurance fee, you're added to our platform policy for sessions booked through STXZ. This is limited coverage for platform-booked sessions only. Independent coaches may also choose to carry their own personal insurance. Who We're Looking For * Consistent experience coaching lacrosse or competitive playing experience * Reliable transportation to training locations in your area * Willingness to complete a background check before receiving full client details * Your own coaching equipment — cones, balls, training aids * Strong communication with parents, players, and the STXZ team * Legal authorization to work in the U.S. as a 1099 independent contractor * Professionalism and confidence working independently with families and youth athletes Apply Now Our application takes about 7 minutes. After review and background screening, approved coaches start receiving local client offers immediately. Complete your application: Questions? Reach our team at STXZ is a technology platform that connects clients with independent lacrosse trainers. STXZ does not employ, supervise, manage, or control trainers or their training sessions. Coaches on STXZ are independent contractors responsible for their own coaching methods, business expenses, taxes, scheduling, and professional conduct. Nothing in this posting creates an employment relationship.

Aliquam luctus tincidunt magna non accumsan.Curabitur vehicula neque vitae sapien tempus euismod.Quisque bibendum suscipit blandit.Donec ac eros nibh, in molestie elit.Integer congue nibh et lorem sollicitudin facilisis.Nullam nec dui justo, vitae vulputate augue.Fusce varius nunc nec felis mattis d

We are not just a retail company; we are a company that values the unique strengths and perspectives that each individual brings. Follow company policies and procedures as outlined in the standard operating procedures manual, employee handbook, and company communications. Perform other duties as nec

Install new electrical equipment and machinery according to specifications and electrical codes. Ensure all electrical work complies with the National Electrical Code (NEC) and local regulations. Strong knowledge of electrical systems, including 480v three-phase power, motor controls, and PLCs.