Trabajos operator en Mineola, New YorkCrear alertas

Job Description \n Operates the telephone console, performs communication activities and responsible for various duties. Performs various routine clerical duties. \n Job Responsibility \n\n • Operates telephone console; answers incoming calls on the main number and calls for the Operator and extends the call to the appropriate extension number; places various outside calls for authorized Personnel according to policy.\n, • Performs various communications and/or emergency activities; answers and responds immediately to all alarms and activates all emergency procedures.\n, • Answers and responds immediately to all alarms and activates all emergency procedures; pages authorized personnel overhead, announces close of visiting hours, and other notifications, as required.\n, • Answers general caller-questions, according to policy; calls the floors to exchange information regarding patient room changes, etc.\n, • Answers the TTY (phone for the deaf) in a prompt manner; logs difficult/questionable calls and alerts appropriate management.\n, • Performs routine clerical duties including, but not limited to: maintaining various records, files, and cards for adjustments to charges, admissions and other information.\n, • Calls appropriate office when one of the alarms in the office sounds; disseminates patient contact information; expedites calls.\n, • Gives out telephone numbers and room numbers, as required.\n, • Uses telecommunications and access patient systems.\n, • Performs related duties as required. All responsibilities noted here are considered essential functions of the job under the Americans with Disabilities Act. Duties not mentioned here, but considered related are not essential functions.\n\n Job Qualification \n\n • High School Diploma or equivalent required.\n, • 1-3 years of relevant experience, required.\n\n \n This position offers significant opportunities for career advancement. VIVO will sponsor your training to become a pharmacy technician. Please be aware that while some roles may not require New York State Pharmacy Technician Registration, Northwell as a healthcare system mandates that you provide proof of your application for the NYS Pharmacy Technician Registration within 90 days of your start date, should you receive an offer. Please note that failure to submit the NYS Pharmacy Technician Registration to Northwell may result in termination. \n \n The position will provide flexible shift options, each lasting 8 hours, within the hours of 7 AM to 7 PM. Variable shifts may encompass, but are not restricted to, the following: Monday through Friday, weekends, and holidays as needed \n *Additional Salary Detail \n The salary range and/or hourly rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future.When determining a team member's base salary and/or rate, several factors may be considered as applicable (e.g., location, specialty, service line, years of relevant experience, education, credentials, negotiated contracts, budget and internal equity).

• REVENUE THAT REWARDS YOUR BUSINESS - Earn up to $3,000+ per week*, • GET PAID TO GET STARTED - $4,000 sign-on bonus, • HOME WHERE IT COUNTS - Home weekends on preferred lanes Buddy Moore puts drivers first-with strong weekly pay, weekly home time, and dry van freight that keeps you earning instead of waiting. We operate with a driver-focused culture built on stability, respect, and real career longevity. Our freight network runs through the Southeast and Mideast, giving drivers miles they can count on and a routine that supports life beyond the road. We're hiring in your local area! If you're looking for a carrier that values your time, pays you well, and keeps your truck running right, Buddy Moore has the opportunities that fit. • Revenue that scales with your setup. Earn up to $3,000+ per week, with revenue share of 68% of line haul for tractor only, 69% for multiple tractors, 75% for tractor and trailer, and 76% for multiple tractors and trailers., • Fuel surcharge, fully yours. Keep 100% of fuel surcharge paid directly to you., • Bonuses that add up. Earn a $4,000 sign-on bonus, plus a $5,000 referral bonus for referring other Owner Operators or Lease Purchase drivers., • Home weekends, familiar lanes. Run preferred traffic lanes across the Southeast, Midwest, Northeast, and Texas, with home time built around your weekends., • A network built to keep you moving. Access a large and growing customer base with driver-friendly dispatchers who work to keep you in the lanes and freight that fit your business., • Get paid fast and simply. Weekly settlements, direct deposit, and weekly advances available via EFS., • Support that lowers your overhead. Plate assistance program and maintenance accounts help keep your operating costs down., • We handle the paperwork. Fuel taxes are handled for you, so you can stay focused on the road., • Start strong. All-expenses-paid orientation gets you up and running without added out-of-pocket cost., • More revenue, lower expenses. A structure designed to maximize your profit as an owner operator. *All pay & bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. • Valid Class A CDL, • 1+ years OTR experience in the last 3 years, • 6+ months Flatbed experience in the last 10 years

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Installs, maintains, calibrates, troubleshoots, repairs, modifies, and overhauls and utilizes technical HVAC skills to ensure the efficient installation, operation and maintenance of the heating ventilation, air conditioning and refrigeration equipment throughout the treatment plant. Primary Duties/Responsibilities: • Install, repair, align and adjust controls for HVAC systems. Service and install components including, but not limited to, compressors, heat exchangers, evaporators, regulators, fans, pumps, tubing valves, ducts, electrical wiring, sensing devices, burners, blowers, electrodes, relays, solenoids, switches, thermostats, conduit, process heating systems and monitoring systems., • Troubleshoot and adjust manual and automatic controls for HVAC equipment. Shape, size and connect tubing using special bending, flaring and coupling tools, etc., • Observe and interpret temperature and pressure devices., • Utilizes specialized tools and equipment including, but not limited to, pyrometers, voltmeters, ammeters, voltmeters, fuel gas analyzers, hydrometers., • Utilize specifications such as: blueprints, sketches and/or descriptions of parts to be replaced, and plan sequence of operations., • Maintain manual and/or computerized work orders and records as directed., • Provide assistance and direction to less experienced HVAC Technician and/or assigned helpers., • May provide support for other skilled trades workers as assigned., • Responsible for general housekeeping of shop, job sites, work areas and other areas as assigned including, but not limited to, sweeping, dusting, mopping, and cleaning as necessary to maintain areas to Company standards., • Observe all on-the-job safety regulations. Work Environment: • Work is performed both inside and outside with exposure to all kinds of weather conditions., • Incumbents may be occasionally exposed to some noise, silica, dust, fumes, smoke, gasses, greases, oils, electrical energy, solvents and vibration., • Incumbents may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, ladder/scaffolding, below ground and may be exposed to water or other liquid materials., • Maintain a high level of focus on health, safety and environment, ensuring safety within all activities.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Eight (8) years of experience as an electrician, electronic repair person, or HVAC technician., • Two years of related education at a college, trade school or equivalent may be substituted for experience. Knowledge/Skills/Abilities: • Ability to read and understand operating manuals and written instructions, complex wiring diagrams, schematics, blueprints and technical materials., • Knowledge of algebra, geometry and trigonometry and knowledge of treatment plant machines and proper procedures for electrical and HVAC maintenance and repair., • Ability to use electrical and other testing equipment to troubleshoot problems and make repairs., • Ability to use variety of tools including, but not limited to, hammers, wrenches, metal snips, electric drill, pipe cutter and bender, and acetylene torches., • Ability to communicate effectively with others, orally and in writing. Ability to follow oral and written instructions., • Ability to perform all of the following assignments: straight pulling, pulling hand over hand, reaching above the shoulder, pushing, walking, standing, crawling, kneeling, repeated bending and climbing., • Thorough knowledge of principles and theories of pressure, vacuum, vaporization, condensations, heat conduction, radiation and convection as such principles and theories apply to air, steam and water furnace, boilers, heat exchanger and pumps., • Knowledge of principles of refrigeration, mathematics, etc, to the degree such principles apply to refrigeration and the HVAC system., • Thorough knowledge of chemistry and physics, oxygen/nitrogen production characteristics, chemical properties and application of refrigerants, techniques of installation, plant operation, maintenance and automation or refrigeration, air conditioning equipment and heating and cooling systems., • Thorough knowledge of an/or experience of relevant electrical codes, principles and theories applicable to the installation and maintenance of electrical equipment including solid state electronic components and electrical/electronic circuits. Required Certification/Licenses/Training: • Valid NYS driver’s license with ability to meet risk management guidelines., • Completion of recognized Apprenticeship program. Additional Information Pay Rate: $44.38 per hour. Benefits: Our employees are covered by comprehensive benefits packages including paid time off policies; health, dental, vision, and life insurance; retirement plans, savings accounts; tuition reimbursement; paid volunteering and more. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description ABOUT THE COMPANY Founded in 1888, Lee Kum Kee, a Hong Kong-based global food company, specializes in creating condiments and sauces that promote Chinese cuisine worldwide. With more than 200 products to choose from, Lee Kum Kee takes the mystery out of cooking authentic and delicious Asian foods in the comfort of your kitchen. Lee Kum Kee is committed to providing authentic and innovative condiments and sauces featuring the highest quality ingredients. Armed with a unique management culture, stringent quality control, superb and innovative products, coupled with the century-long brand reputation, Lee Kum Kee has achieved unanimous recognition and won numerous prestigious awards. BENEFITS • Medical, dental, life insurance covered by the company, • 401(k) retirement plan with company match, • Two (2) weeks vacations, • Ten (10) paid holidays POSITION SUMMARY 1st Shift: 5am - 1:30pm To perform this job successfully, the deep reach forklift operator must be able to operate electrical power industrial truck or liquid propane gas (LPG) sit-down and stand-up forklift with lifting devices such as, push-pull, elevating platform and/or slip sheet attachments to push, pull, lift, stack, tier, or move products, equipment, or materials by performing the following duties. ESSENTIAL FUNCTIONS • Operate forklift by positioning forks on lifting platform, load pallets, skids, boxes, products and transport/stock to designated locations., • Ship orders, pull orders, verify orders against packing slip, scan orders with inventory devise to create TO numbers, log shipping orders, pick orders, and log and post goods shipped into inventory devise, and move picked orders into shipping area., • Load trucks with pallets, boxes, and drums., • Receive shipments, unload shipments, verify shipments, sort and separate goods, log goods receive, post goods receive, tag pallets, and move goods into designated locations., • Perform inventory count and cycle counts., • Perform internal housekeeping, including change batteries, recharge batteries, and clean working area etc., • Perform all duties in a safe, careful manner at all times., • Other duties and responsibilities as assigned. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. A. EDUCATION and/or EXPERIENCE • This position requires a High School Diploma or equivalent education, • Minimum of three months forklift operating experience in warehouse environment., • Industry forklift certificate is a must., • Ability to speak, read, writes, and comprehends simple English., • While performing the duties of this job, the employee is regularly required to stand; use hands or fingers to handle or feel; reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and taste or smell., • The employee must frequently lift and/or move up to 50 pounds., • Specific vision ability is required, including close and distance vision, color vision, peripheral vision, depth perception, and ability to adjust and stay focus. Lee Kum Kee (USA) Inc., a division of Lee Kum Kee International Holdings Ltd., has its headquarters and manufacturing facilities in Southern California with more than 300 employees. We are looking for the best and brightest talents to join our company and work together to bring the next level of success! It is Lee Kum Kee’s policy to seek and employ the most qualified persons in all jobs in a manner which will ensure equal employment opportunity as well as administer personnel actions in a manner as to not discriminate against any person on the basis of race, color, religion, national origin, age, sex, sexual orientation, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 1st Shift: 5am - 1:30pm

Job Description • Position: Chef de Cuisine, • Pay Range: $90,000 to $100,000 *Internal Employee Referral Bonus Available At Union Square Events and CxRA, we believe great hospitality starts with great people. Together, our organizations combine culinary excellence, operational expertise, and genuine hospitality to create exceptional experiences across New York City and beyond. Founded in 2005, Union Square Events has grown into a leading hospitality company serving a diverse portfolio of cultural, corporate, entertainment, and private venues, while CxRA—established in 1996 as the catering arm of Restaurant Associates—has built a reputation for highly customized events, innovative menus, and impeccable execution. Job Summary Belmont Park is home to the Turf Club Restaurant and Turf Club Lounge — two distinct dining experiences built on recipes, culinary standards, and presentation direction developed with Chef Marc Forgione. This is a hands-on leadership role for a chef who wants to run a serious kitchen inside one of the most storied venues in American racing: bringing Forgione's vision to the plate, service after service, across two dining rooms with different paces and personalities. Belmont Park is operated by the New York Racing Association (NYRA), with Levy engaged as the exclusive food and beverage operator across the Facility. CxRA is partnering with Levy with Special Events catering and service, as well as service in the Turf Club. The Chef de Cuisine runs the kitchen for the Turf Club Restaurant and Turf Club Lounge. This role owns execution, consistency, food cost, safety, and team performance for both spaces. KEY RELATIONSHIPS • Levy Executive Chef, NYRA — culinary alignment, standards, and coordination with the broader Levy food and beverage program across Belmont Park., • CxRA VP of Operations — business performance and service excellence for the Turf Club Restaurant & Lounge., • Chef Marc Forgione — collaborates on recipes, menu development, and presentation standards for the Turf Club Restaurant & Lounge; an operational, not a supervisory, relationship., • General Manager, Turf Club Restaurant & Lounge — day-to-day operating partner on service timing, pacing, and guest experience. CORE RESPONSIBILITIES • Run the kitchen for the Turf Club Restaurant and Turf Club Lounge, ensuring each dining room is served at the standard and pace appropriate to its concept., • Execute recipes, menus, and presentation standards developed in collaboration with Chef Marc Forgione, with consistency across both dining rooms., • Participate in recipe development and tastings with Forgione; provide feedback on execution, cost, and feasibility at volume., • Manage kitchen staffing, scheduling, and labor cost, scaling for live race days and marquee events (Belmont Stakes, Breeders’ Cup) and adjusting for dark-day operations., • Own food cost, purchasing, inventory, and vendor relationships in line with CxRA and Compass Group standards., • Maintain food safety, sanitation, and health code compliance., • Hire, train, and develop sous chefs, cooks, and kitchen support staff., • Partner with the General Manager on service pacing and kitchen-to-floor communication for both dining rooms., • Coordinate with the Levy Executive Chef, NYRA on culinary consistency across Belmont Park’s broader food and beverage program., • Support special event execution when the Turf Club Restaurant or Lounge is used for private dining or events, particularly on dark days;, • This role also supports events on 5th floor event space, whenever possible particularly when events aren’t happening at same time as Turf Club operations QUALIFICATIONS • 5+ years of progressive culinary leadership experience, including experience running a kitchen serving multiple dining concepts., • Experience executing a chef partner’s or brand’s standards with precision; this role is focused on execution, not primary menu authorship., • Strong financial acumen: food cost management, labor scheduling, and P&L accountability., • ServSafe or equivalent food safety certification., • Ability to work a schedule built around a live racing calendar, including weekends, holidays, and marquee event dates. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Abides by all Company policies and procedures including but not limited to: • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables., • The use of slip-resistant shoes and proper lifting techniques. Union Square Events maintains a drug-free workplace. Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. Req ID: 1570565

Job DescriptionDescription: Find your place. Build your future. Learn what it actually takes to operate and lead a successful private club food and beverage program. Pine Hollow Club’s 14-week Food & Beverage Management Internship is a paid, hands-on experience designed for students interested in hospitality operations and leadership. You will learn the operation from the ground up—beginning with service fundamentals and progressing through restaurant and beverage operations, banquets, staffing, inventory, training, cost awareness, and other responsibilities managed behind the scenes. This is not an internship spent watching from the sidelines. You will work alongside the team in service and support positions before beginning to view the operation through a manager’s lens. PROGRAM DETAILS • Spring/Summer 2027, • 14-week program, • Pay: [$17.00 per hour], • Reports to the Senior Food & Beverage Manager, with additional departmental mentors, • Mid-program check-in and final performance evaluation WHAT YOU’LL EXPERIENCE Throughout the program, you will gain exposure to: • Private club hospitality and personalized member service, • Restaurant service and dining-room operations, • Reservations, seating, POS systems, and service flow, • Beverage operations and service standards, • Opening, closing, and daily operating procedures, • Staffing, scheduling, and labor deployment, • Inventory, purchasing, receiving, and par levels, • Banquet and catering service, • Banquet Event Orders and event preparation, • Member requests, feedback, and service recovery, • Training, onboarding, and team communication, • Food and beverage costs and operating performance, • Coordination among Food & Beverage, Culinary, Events, and other departments HOW THE PROGRAM DEVELOPS The program begins with the fundamentals of excellent service. You will then rotate through restaurant and beverage operations, banquet and catering service, and the administrative work behind the department. As you progress, you may help prepare floor plans and staff assignments, participate in inventory counts, review labor and business levels, assist with pre-shift training, and work alongside managers during opening, closing, and live service. The program concludes with an F&B leadership project addressing a real operational opportunity. You will analyze the issue, develop practical recommendations, and present your work to F&B leadership. WHO WE’RE LOOKING FOR This opportunity may be a strong fit if you: • Are pursuing or recently completed a degree in hospitality, hotel and restaurant management, business, or a related field, • Want to understand both frontline service and behind-the-scenes management, • Are comfortable learning by actively working within the operation, • Have strong communication, organization, and problem-solving skills, • Are dependable, professional, and attentive to detail, • Can work approximately 35–40 hours per week, including evenings and weekends based on Club operations, • Are interested in developing as a hospitality operator and future leader ACADEMIC CREDIT Pine Hollow will work with participating students and their academic institutions to complete reasonable documentation needed for academic credit, including verification of hours and required employer evaluations. If you want to learn how great service is delivered—and how a strong F&B operation is built, managed, and improved—we invite you to apply. Requirements:

Are you a strategic operator, people leader, and business driver who thrives in a fast-paced retail environment? At Bloomingdale's, we're looking for an exceptional Senior Manager, Operations to join the Roosevelt Field store leadership team and play a pivotal role in shaping the customer experience, driving operational excellence, and delivering business results. As a key member of the leadership team, you'll lead and inspire a diverse team of professionals, oversee all facets of store operations, and partner across the organization to ensure seamless execution. From fulfillment and customer service to expense management, workforce planning, and technology adoption, you'll be at the center of what makes our stores successful. Essential Functions: • Drive sales, profitability, and operational performance, • Lead and develop high-performing Operations, Fulfillment, and Support teams, • Enhance the customer experience through outstanding service and execution, • Partner with Store, Regional, and Corporate leaders to deliver strategic initiatives, • Optimize workforce planning, productivity, and expense management, • Champion innovation, process improvement, and operational efficiencies, • Ensure a clean, organized, and customer-ready shopping environment Qualifications: • Proven leadership experience managing large, diverse teams, • Strong business and financial acumen, • Operational expertise in retail, fulfillment, or service environments, • Passion for developing talent and building high-performing teams, • Customer-first mindset with a focus on execution and results

Location: Long Island, NY — on-site across Roslyn, Syosset & Commack About Hoop Lab Hoop Lab is a basketball training company focused on helping players develop their skills through high-quality coaching, programming, and training environments. As we grow across Long Island, we're looking for a hands-on operator who can make sure our locations run exceptionally well every day. The Role As our Site Operations & Community Lead, you'll own the day-to-day operations across our Roslyn, Syosset, and Commack locations. This is not a desk job. You'll spend your week across all three locations, making sure facilities are ready, schedules are accurate, operational issues are resolved, parents get answers, and the dozens of small details that keep a growing business running don't fall through the cracks. You'll report to our Head of Operations and work closely with our Basketball Director, who owns the basketball and player-development experience, while you make sure the operations and overall experience surrounding it runs smoothly. We're looking for someone who genuinely enjoys being the person others can count on—the person who notices what needs attention, figures out what needs to happen, and closes the loop without needing to be reminded. What You'll Do Support parents and prospective members You'll regularly interact with parents and families - while you’re not the go-to for any inquiry, you will greet new members when they walk in the door, handle escalations, and help coordinate special events like birthdays, guest coach clinics, and more. That could mean having an on-the-spot sales conversation, or troubleshooting a membership issue when a parent approaches you at a location. Own day-to-day operations across three locations You'll split your week across Roslyn, Syosset, and Commack and maintain a regular operating checklist for each location, including facility condition, equipment, supplies, staffing coverage, and schedule accuracy. Keep our facilities running When something breaks, you'll get it fixed. You'll be the first call when there's an operational problem and will own issues through resolution. Build our local presence You'll coordinate local school and league partnerships, sponsorships, open gyms, clinics, and other community activities. You’ll collaborate with your Basketball Director counterpart to make engaging community events happen, you'll own the calendar and, just as importantly, the follow-through required to make these events memorable and buzzworthy. Partner with our basketball team You'll work closely with the Basketball Director on schedules, staffing gaps, and programming. They'll own the basketball product and player development. You'll own the operational environment that allows them and our coaches to deliver it. You Might Be a Great Fit If You... • Are highly organized and naturally keep lists, follow up, and close loops., • Have owned an operation where you were ultimately responsible for making sure things got done., • Don't need a manager physically present to keep you moving., • Are comfortable interacting with parents, coaches, vendors, and kids—sometimes all within the same hour., • Can mentally move between three locations in a day without losing track of what's happening at any of them., • Like solving practical problems and can reprioritize quickly when something unexpected happens., • Are comfortable having sales and membership conversations with prospective and current families., • Have reliable transportation and can regularly travel between our Long Island locations., • Enjoy working with families and kids! Experience in youth sports, camps, boutique fitness, hospitality, retail, or another high-touch consumer business could be especially relevant, but we're more interested in how you operate than where you've worked. This Probably Isn't the Role for You If... You're looking for a traditional desk-based operations position. This is a hands-on role that requires being present in our locations, noticing what needs attention, talking with families and coaches, solving problems, and taking ownership—even when something doesn't fit neatly inside a job description. What Success Looks Like Our locations are organized and ready to operate. Parents get answers. Coaches know what's happening. Facility issues get resolved quickly. Events happen when they're supposed to happen. Details don't fall through the cracks. Most importantly, our basketball team can focus on delivering a great experience for players because you've made sure the operation around them works.

Controller (Family Office) • $170,000 - 210,000 Base Salary + Bonus, • Fully Remote. Occasionally Travel to meet with Family to discuss finances (NY/NJ Area), • .High Profile Family. Your job will be split between their FO and Foundation. You'll be responsible for all Accounting/Ops/Compliance. This role is not Fund or Investment Accounting. True Needs: • Hands-on controller who has personally run full cycle accounting/QBO recently, • Multi-entity experience, • Strong ops/admin range (payroll, bill pay, reimbursements, insurance, compliance), • Family office, private wealth, or foundation exposure a plus, • CPA or equivalent hands-on controller experience, • Automation/AI mindset a plus About the Opportunity Our client is seeking a highly organized, hands-on, and entrepreneurial Controller to manage and optimize the internal financial infrastructure for a lean, high-growth Family Office and global Foundation. This role is designed for an operator who excels in a direct-support environment to a high-net-worth principal. The ideal candidate will seamlessly balance corporate accounting, foundation compliance, and personal financial management with a high degree of precision, discretion, and operational ownership. Key Responsibilities Financial Operations & Management • Full-Cycle Accounting: Manage daily general ledger operations, monthly/quarterly/annual closes, bank reconciliations, accruals, and financial statement preparation (Balance Sheet, Income Statement, Cash Flow)., • Accounts Payable & Cash Management: Oversee all bill pay, wire transfers, ACH payments, and expense management, ensuring proper coding and record-keeping., • Payroll Processing: Execute bi-weekly payroll for core office staff and handle necessary payroll journal entries and reconciliations. Personal Finance & Foundation Compliance • Principal Personal Finances: Manage all accounting, personal expense tracking, travel policy oversight, and credit card/reimbursement processing for the Principal., • Foundation & Compliance: Oversee foundation accounting, tracking grant distributions, coordinating annual audits, and preparing materials for tax filings (including Form 990-PF / 4990 compliance)., • Vendor & Tax Liaison: Serve as the primary operational contact for external tax accounting firms, auditors, insurance brokers, and legal partners. Process Automation & Systems • Systems Maintenance: Utilize and manage core accounting software platforms (QuickBooks Online, payroll tools, and expense/AP systems., • Workflow Automation: Identify opportunities to automate manual workflows, build clean data feeds, and improve reporting efficiency across entities. Candidate Qualifications Experience: 7-10+ years of progressive accounting experience, with demonstrated ownership in a Family Office, single-founder business, high-net-worth personal finance seat, or boutique accounting firm setting. Technical Skills: • Deep proficiency in QuickBooks Online (QBO) and modern financial technology tools., • Accounting Rigor: Hands-on multi-entity accounting background with a clear understanding of general ledger mechanics, tax compliance, and payroll processing. Big 4 or public audit background is a strong plus., • Execution Focus: A true "operator" mindset—someone who embraces hands-on execution (data entry, reconciliations, bill pay) rather than solely managing external teams., • Communication & Discretion: Exceptional attention to detail, strong communication skills, and absolute discretion when handling sensitive financial and personal data., • Credentials: CPA or CPA candidate preferred, but relevant hands-on operational track record is paramount. By submitting to this position, you are agreeing to be included in our talent pool for future hiring for similarly qualified positions. Equal Opportunity Notice Highspring LLC (d/b/a Vaco by Highspring) and its parents, affiliates, and subsidiaries ("we," "our," or "Vaco by Highspring") are committed to the full inclusion of all qualified individuals and does not discriminate against any employee or applicant for employment because of race (including but not limited to traits historically associated with race such as hair texture and hair style), color, sex (includes pregnancy or related conditions), religion or creed, national origin, citizenship, age, disability, status as a veteran, union membership, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, political affiliation, or any other protected characteristics as required by applicable law. The company is also committed to ensuring that persons who need them are provided with reasonable accommodations; if an accommodation is needed to participate in the job application or interview process, please contact HR@vaco.com . Vaco by Highspring also wants all applicants to know their rights that _. Representation Notice By submitting to this position, you agree that you will be giving Vaco by Highspring the exclusive right to present your as a candidate for the foregoing employment opportunity. Additionally, you agree to be included in our talent pool for future hiring for similarly qualified positions. You further agree that you have represented information about yourself accurately and have not affirmatively misrepresented your qualifications. Lastly, you agree to maintain as confidential, to the fullest extent permitted by law, any information you learn from Vaco by Highspring about the position and you will limit disclosure of information about the position only to the extent necessary to perform any obligations in furtherance of your application. In exchange, Vaco by Highspring agrees to exercise reasonable efforts to represent you through all solicitation, job screening and resume dispersal. For residents of Ontario, Canada only: to the extent the position for employment is not with Highspring or not otherwise noted as vacant above, candidate should be informed that this role is to replace a presently employed person at Vaco by Highspring's client. Privacy Notice Vaco by Highspring respects your privacy and are committed to providing transparent notice of our policies. • California residents may access Vaco by Highspring HR Notice at Collection for California Applicants and Employees _., • Virginia residents may access our state specific policies _., • Residents of all other states may access our policies _., • Canadian residents may access our policies in English and in French ., • Residents of countries governed by GDPR and UK GDPR may access our policies _. Additionally, submissions to this position are subject to the use of AI to perform preliminary candidate screenings, focused on ensuring minimum job requirements noted in the position are satisfied. More details about Vaco by Highspring's use of AI can be found here (_). Further assessment of candidates beyond this initial phase will be conducted by recruiters and hiring managers. Vaco by Highspring does not know and cannot opine on if its client's use of AI products in hiring. Pay Transparency Notice Determining compensation for this role (and others) at Vaco by Highspring depends upon a wide array of factors including but not limited to: · the individual's skill sets, experience and training; · licensure and certification requirements; · office location and other geographic considerations; and · other business and organizational needs. With that said, as required by local law, Vaco by Highspring believes that the following salary range referenced above reasonably estimates the base compensation for an individual hired into this position in geographies that require salary range disclosure. The individual may also be eligible for discretionary bonuses and/or participation in medical, dental, and vision benefits as well as the company's retirement plan (or similar retirement benefits).

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: In coordination with Plant Manager the incumbent will be responsible for providing the day to day oversight of department staff, shift operations, trouble shoot equipment problems and generate work orders as needed, as well as providing operational, commercial and personnel leadership to the plant shift operating teams to maintain efficient and cost effective facility operations while maintaining compliance with all Corporate and Regulatory environmental, health and safety rules and requirements. Primary Duties/Responsibilities: • Supervises a staff of Plant Operators – trainees, 1A licensed Operators, 2A licensed Operators and 3A licensed Operators and directs their daily duties in accordance with the requirements of the Plant., • Work with other plant departments, Engineering, and contractors to coordinate projects., • Lead and guide shift crews to monitor all facets of plant operations and incoming data., • Manage, evaluate, schedule, and develop the O&M staff and always ensure adequate staffing., • Provides leadership and directing in response to alarms and abnormal conditions and lead emergency response actions., • Independently evaluates and/or supervises the evaluation of the operation, maintenance and performance of wastewater treatment facilities, processes, systems, and equipment., • Reviews, and supervises implementation of system improvements including analyzing and optimizing existing system designs and operating parameters, supervising performance testing and troubleshooting and resolving complex operational, equipment and instrumentation problems., • Reviews designs and constructed facilities and makes and approves recommendations for operational improvements., • Oversees construction management personnel in implementing changes required during facilities upgrades and startup, supervises the work of operational services, treatment plant construction personnel in startup and initial operation of new or upgraded wastewater treatment facilities, processes, systems, and equipment., • Participate in the development and compliance of operating policies ensuring compliance to all environmental and safety rules., • Complete reports which document plant status, equipment, operating data, and operational events., • Collect data on unplanned outages and make recommendations to minimize the probability of similar events., • Serves as the real-time shift interface with the Commercial Group with respect to plant operations, outages, fuel, generations schedules., • Perform Issuer and Verifier functions utilizing the approved Lock Out/Tag Out systems to help ensure that safe systems are always in place., • Manage Department contract deliverables and scheduling., • Responsible for ordering of materials and supplies., • Ensures all equipment and processes are well maintained and functioning properly., • Ensure that workstations and Treatment plant facilities are in clean and safe in accordance with all regulatory requirements., • Maintain proper operational documents and records., • Assure work is performed in a safe and professional manner by following all corporate and regulatory policies, procedures, and emergency response procedures., • Operates equipment and processes manually and through instrument control panels., • Work weekends, holidays, and be on-call on a rotating basis/schedule as needed., • Respond to emergencies, work additional hours to complete required tasks as/and when needed., • Operate company and client owned vehicles., • Carries out other duties as assigned. Work Environment: • Work is performed both inside and outside with exposure to all kinds of weather conditions., • Incumbents may be occasionally exposed to some noise, sewage, silica, dust, fumes, smoke, gasses, greases, oils, electrical energy, solvents, and vibrations., • Incumbents may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, and ladder/scaffolding, below ground and may be exposed to water and other liquid materials.Qualifications Education/Experience/Background: • High School Diploma or GED, bachelor’s degree (or equivalent experience) in Environmental Science, Engineering, Biology/Laboratory, or related fields preferred., • 5+ years of experience working in a plant operations position., • 10+ years of experience required working in the Wastewater Treatment or related field is preferred., • Experience with maintenance systems, project contract administration in the water/wastewater utilities industry is preferred. Knowledge/Skills/Abilities: • Strong process control knowledge is a must., • Excellent reading, math, writing, scientific, and verbal communication skills., • Excellent organizational, scheduling, and prioritizing skills and abilities., • Ability to read and interpret data from maps, engineering drawings, blueprints, gauges and graphs., • Ability to understand/execute written and oral instructions, read/understand complex technical instructions., • Ability to read, interpret, and record data from meters, gauges, scales, panels, and computer consoles., • Ability to interpret service manuals and drawings and write SOPs., • Excellent troubleshooting/problem solving skills, provides input for corrective actions and implements corrective actions as needed., • Proficient in Windows, MS Office Suite, Google Workspace, OPS, EAM & CMMS, and other computer-based systems., • Working knowledge of computerized PLC/SCADA systems, DCS control systems, computerized operating data acquisition and historical trending systems., • Working knowledge and skills of equipment specific to departmental needs and requirements., • Knowledge of and ability to perform standard laboratory sampling, testing, and documenting and maintaining all related records and reports., • Knowledge of normal and abnormal process and equipment conditions and capable of taking appropriate, safe actions., • Ability to operate complex controls, processes, and equipment., • Knowledge of wastewater treatment plant equipment and processes., • Knowledge of wastewater treatment plant regulations, requirements & reporting., • Knowledge of proper Environmental, Health and Safety policies, procedures, and requirements., • Must be capable of being assigned in responsible charge of the facility with the ability to react to unplanned events., • Must have the ability to maintain effective working relations w/management, supervisors and staff., • Must have the ability to make decisions with no supervision., • Proven ability to successfully manage time and prioritize work., • Must be able to communicate well w/individuals at all skill, knowledge and experience levels., • Must be able to lead by example, lead, train and mentor all staff and team support personnel., • Must have the ability to lead the department/team effectively in all situations under any conditions., • Must be able to work closely with local contractors and vendors., • Must be able to work as a team in a teamwork-oriented environment., • Must be safety conscious and able to work independently with no supervision. Required Certification/Licenses/Training: • Valid NYS Driver’s license and the ability to meet risk management guidelines., • Possess a valid NY State Grade 3A Wastewater Treatment License, 4A license desired. Physical Requirements: • While performing the duties of this Job, the employee is regularly required to talk or hear., • The employee is frequently required to stand; walk; sit; use hand to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl or smell., • The employee must occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this include close vision and distance vision. Additional Information Pay Range: $100000 to $105000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Coca-Cola is seeking Warehouse Workers / General Laborers to work in distribution centers loading, unloading, picking, packing, and moving beverage products for delivery routes. Warehouse Workers are responsible for building pallets, picking orders, loading delivery trucks, unloading incoming shipments, moving product throughout the warehouse, and using pallet jacks or forklifts to transport products. Employees must follow company safety procedures, warehouse guidelines, and productivity standards to ensure orders are prepared accurately and on time. This position typically pays $18 to $26 per hour, with opportunities for overtime pay, overnight shift differential pay, weekend pay, and attendance or performance bonuses depending on location and shift. Warehouse Workers are responsible for picking orders using pick sheets or handheld scanners, building pallets, shrink-wrapping pallets, loading trucks, unloading deliveries, organizing inventory, cleaning work areas, and maintaining warehouse organization. The role is physically active and requires frequent lifting, bending, and moving throughout the shift while working in a fast-paced warehouse environment. Full-time employees may be eligible for benefits including medical, dental, and vision insurance, 401(k) with company match, paid time off, paid holidays, tuition assistance programs, and opportunities for advancement into forklift operator, lead, or supervisor roles. Some locations may also offer shift differential pay and performance incentives.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Under the direction of the Operations Supervisor, Operations Lead Personnel and in coordination of fellow Operations Personnel the incumbent will perform a variety of basic tasks relevant to the day-to-day operation of the wastewater treatment plant facilities, processes and equipment, including process and equipment rounds, recording operations data and information, making observations and reporting on variations in operating conditions, maintaining logs and other required reports and forms, and provides input for corrective actions and implements corrective actions as directed. Assist Operations in efforts to maintain efficient and cost-effective facility operations while maintaining compliance with all Corporate and Regulatory environmental, health and safety rules and requirements. Primary Duties/Responsibilities: • Works a scheduled shift and will be subject to required emergency call in or shift coverage as Operational needs demand., • Under the direct Supervision of Shift Supervisor or Lead person may be required to perform some of the following tasks depending on the station assigned for that shift:, • Record and Read meters for (pumps, gauges, motors etc.…) in accordance with all regulatory requirements., • Record tank levels, sludge blanket levels., • Operate equipment pertinent to assigned workstation (GBT, BFP, overhead lifting jib crane, pumps), • Open, close and adjust valves for tanks & pumps., • Observe their process areas (pumps, motors, valves, sewage color, odor, flow) record their findings., • Collect samples for laboratory analysis., • Receive chemicals in bulk, drum and tote form., • Adjust / bleed pumps as directed., • Keep the workstation and surrounding area safe and clear of debris., • Inspect equipment for proper functionality and refer to Maintenance for any necessary repairs., • Maintain a logbook for the station they are operating., • Create work requests for equipment found to be malfunctioning or broken., • Make adjustments to equipment to optimize the operation (GBT & Dewatering)., • Troubleshoot operational issues and get approval of operations supervisor before executing. Work Environment: • Work is performed both inside and outside with exposure to all kinds of weather conditions., • Incumbents may be occasionally exposed to some noise, silica, dust, fumes, smoke, gasses, greases, oils, electrical energy, solvents and vibration., • Incumbents may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, ladder/scaffolding, below ground and may be exposed to water or other liquid materials., • Maintain a high level of focus on health, safety and environment, ensuring safety within all activities. Qualifications Education/Experience/Background: • High School Diploma or GED, associate degree (or equivalent experience) in Environmental Science, Engineering, Biology/Laboratory or related fields preferred. Knowledge/Skills/Abilities: • Requires good reading, math, writing, and verbal communication skills., • Ability to read, and record data from meters, gauges, scales, panels, computer consoles, and other equipment., • Ability to understand/execute written and oral instructions, read/understand technical instructions., • Ability to interpret data and information from technical service manuals and drawings., • Knowledge of Windows, Google Workspace, MS Office Suite, and other computer-based systems., • Knowledge of basic laboratory sampling, testing and documentation., • Ability to adjust chemical feeds and processing equipment as directed to maintain compliance., • Basic knowledge of wastewater treatment equipment and processes., • Must have the ability to maintain effective working relations w/management, supervisors, and staff., • Must be able to work as a team in a teamwork-oriented environment., • Must be safety conscious and able to work independently with little or no supervision., • Must have a general understanding of how the treatment plant works and the SPDES limits associated to the station being operated. Required Certification/Licenses/Training: • Valid NYS Driver’s license and the ability to meet risk management guidelines., • Ability to attend classes required for obtaining valid NY State Wastewater Treatment license and obtain license within 24 months. Additional Information Pay Rate: $22.91 per hour. Benefits: Our employees are covered by comprehensive benefits packages including paid time off policies; health, dental, vision, and life insurance; retirement plans, savings accounts; tuition reimbursement; paid volunteering and more. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionDescription: Job Overview: This role is called a Mood Lifter, but until that is a word job seekers are typing into Google, we will stick with using the more widely known title of Gym Floor Associate. What is a Mood Lifter, you ask? Mood Lifters are the people who greet each of our members with ear-to-ear smiles, over the top enthusiasm and pretty much know everyone in the club by name. They will run to open the door for you in a driving rainstorm and change a channel so you don’t miss a minute of the big game. They consistently go above and beyond and you can’t help but smile when you see them. Responsibilities: • Greet every member and guest with enthusiasm and a smile, • Tour potential members around the club with the goal of signing up the person for a membership, • Sign members up for startup sessions with Blink Personal Trainers, • Answer phone calls in a professional and energetic manner, • Execute all opening/closing operational procedures to ensure the club runs smoothly, • Handle member requests and concerns with professionalism and a sense of urgency, • Actively participate in ensuring the club is spotless including frequent bending, lifting, and walking around the club to organize equipment and straighten up, • Maintain regular and punctual attendanceRequirements: Qualifications: • Enthusiastic, energetic, friendly and personable, • Excellent verbal and written communication skills, • Able to lift and move gym equipment weighing 15-20 lbs frequently and 45 lbs occasionally, • Able to remain in a stationary position at the front desk for the majority of the workday, • World class customer service skills, • Works hard, multi-tasks and is a problem solver, • Passion for fitness Compensation & Benefits: • Career Advancement opportunities, • Complimentary gym membership, • Medical, Dental, and Vision plans, if work 30 or more hours on average weekly, • 401(k) Retirement savings plan, • Fun working environment!, • Pay Transparency: $17.00/hr About PureGym: The PureGym Group is a leading gym operator headquartered in the UK, boasting over 600 locations and more than 2 million members worldwide. We're thrilled to announce our expansion into the United States! Our commitment to providing high-quality, affordable gyms for everyone, everywhere, remains unwavering. Our mission to inspire healthier nations has made us the UK's favorite gym, and now, an international success story. With our unique "Everybody Welcome" approach, we create a friendly, warm, and inclusive environment for all our employees and members.

Job Description About this role: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries is currently seeking Water Jet Operator to provide accurate and consistent parts in a timely and cost effective manner to meet our quality standards and expectations. Essential Requirements: • Responsible for water jet machine operations associated with quantity production of identical units., • Program and operate a 55,000 lbs. CNC water jet machine form Jet Edged., • Start and stop the machine, load/feed the machine, and monitor machines operation., • Monitor production to ensure quality and perform verifications and inspection of the product and the machine., • Make sure the equipment is in top operation performance and alert supervisor of repairs when needed., • Maintain a safe and clean work environment., • Must be able to work in a team environment., • Complete the proper transactions for each job., • Label material with correct descriptions., • Meet or exceed client's specifications as outlined on the manufacturing order., • Make sure the job and materials are of good quality., • Any other general machine operation tasks or responsibilities assigned by his or her supervisors. Education / Experience Requirements: • Knowledge of machinery and/or tools, • Mechanical Ability, • Auto CAD experience a plus, • Be able to work with manufacturing personnel to maintain product quality and consistent output, • Ability to lift and carry up to 50 lbs. in a physical environment., • Ability to stand for periods of time up to and exceeding 60 minutes., • Ability to make repetitive movements including, but not limited to, sitting and squatting, • Ability to read and comprehend blueprints, • Basic program reading skills using MS Windows applications as well as downloading files, • Fundamental understanding of M and G codes, • Must be eighteen years of age and possess a HS Diploma or GED Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life, • PTO Parabit Systems is focused on growth and growing leaders. Parabit Systems is an equal opportunity employer, offering a great work environment, and challenging career opportunities. Please email your resume to Recruiting@Parabit.com. All employment candidates must pass a NON-DOT Drug screening, a background check, and personal assessment prior to employment.

Job DescriptionCompany Description Are you a capable operator within the Group Travel sector, or somebody from a Travel background that is keen to sell and organise Group Travel? Are you well-organised, highly motivated & driven & detail focussed, and able & keen to hit sales targets? Are you ambitious, and keen to join a unique, exciting & dynamic Travel Business? If so - this could be the opportunity that you have been looking for... The Travel Division has primarily operated as a high-end, luxury Travel Agency, working alongside our Sister company Air Charter Service, to ensure that their charter customers have exclusive access to a range of ancillary products, including Luxury Hotels, Premium Cabin Flights, and top-of-the-range Villas & Yachts. Our business is all about service, and we work to the end that we will always go the extra mile to ensure that the time spent in destination is as well organised and memorable as the time spent onboard one of our Charter Flights. We have recently expanded to launch a Group Travel Business, after seeing requests for Corporate Groups, MICE, School Travel & Entertainment growing steadily. After unprecedented success in the opening months, we are now looking to grow the business with our in New York office. We are looking to bring in an experienced group travel operation expert, who can work alongside our Commercial Jet brokers in Uniondale office and beyond, to establish a successful group travel business in USA. The role requires a multi-skilled individual who can source, manage & book enquiries, deliver outstanding customer service, and help us to cement our position within the sector. We are a fast-growing company, with plans for further expansion in the Groups Travel space over the coming years. We are looking for pro-active, energetic and driven people to help us take our business to the next level. Job Description WORKING WITHIN THE TRAVEL DIVISION • Use experience and knowledge of USA group travel market to set up our access to market with all major airlines to enable us to quote, book and manage group travel requests with speed, cost-efficiency., • Analyse the gaps in our business set up, identify opportunities for improvement and implement changes within our operations to improve efficiency., • Working to externally source leads, as well as engaging with referred Large Group Private Aviation Clients, to build a List of Repeat Travel Customers., • Demonstrating an expert understanding of the most suitable Group Travel Product for each customer, and making suitable recommendations., • Managing group travel bookings from enquiry to completion, and collaborating with other company departments to ensure best possible experience for our customers., • Always taking a “Customer First” attitude, and taking full ownership of our Customers In-Destination Experience, which may involve working outside of regular hours to ensure all customer trips run successfully., • Maintaining relationship with repeat clients, and pro-actively managing your customer list through outbound sales calls, emails and visits (both face-to-face and virtual) and ensuring that they come back to you again and again for their group travel needs., • Engaging with Suppliers & Partners to ensure you are able to provide the most suitable choices for the customer's requirements., • Working towards exceeding daily, monthly & annual goals linked to both productivity and financial targets, and being able to collaborate, work as part of a team, and contribute towards a wider group collective., • Following company procedure in a methodical and chronological way to ensure protection of both TTD and your clients., • Working productively in what can sometimes be a pressurised environment, and making prompt, clear decisions which may involve tough choices or considered risks., • Representing the Business externally at events with suppliers, customers & wider industry peers., • In time, recruit and train new groups consultants to join the business and enable us to continue to grow.Qualifications THE PERSON • Very clear written & verbal communication skills, • Fluency in both written and spoken English, • Extensive knowledge of major global destinations and travel products, and an up to date understanding of latest tourism trends., • Someone with a high aptitude and passion for sales, ideally with a track record from previous Travel Industry role., • An organised & disciplined attitude towards workload and time management, balancing multiple factors at any one time, is very important., • A willingness to commit to the demands of the role – including (where necessary) working outside of regular working hours to get the job done., • Ability to work independently, but also able to collaborate with people inside and outside of both The Travel Division and the wider parent company., • Somebody who enjoys working to both individual and team goals / objectives, within in a friendly and competitive environment., • Previous experience of working on a GDS (ideally Amadeus) is desirable, • Previous experience of booking and managing Groups within the Travel Industry is desirable Additional Information WHAT IS IN IT FOR YOU • $80K USD salary + 10% uncapped commission, • Clear path for career advancement, • Job stability and leadership support for development, • Affordable health, dental, and vision insurance plans, • 401K retirement savings plan with generous employer match!, • Life insurance, • Paid maternity/paternity leave, • 20 days to start vacation time, and more earned each year, • Paid sick time, • 12 paid public holidays, • Additional paid leave for your birthday, wedding, moving house, holiday shopping, and more Diversity & Inclusion: Air Charter Service Inc. is proud to be an Equal Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. WHAT ARE THE NEXT STEPS? Submit your resume to us today and a member of our recruitment team will be in touch!

Job Description Description: We are looking for 1 candidate for the 3rd shift: Third 2230 0715 Line Service-Assistant - 3rd Shift Packaging Important that they are able to work on the 1st shift (6:45 a.m. 3:30 p.m.) for 4 weeks to train. This Will Be Confirmed Once Background Checks Complete. Then they will be assigned to the 2nd shift (3 p.m. 11:45 p.m.) or the 3rd shift (10:30 p.m.- 7:15 p.m.) depending on their availability. There is a 45-minute lunch and two 15-minute breaks. Then they will be assigned to the 2nd shift (3 p.m. 11:45 p.m.) or the 3rd shift (10:30 p.m.- 7:15 p.m.) depending on their availability.

Job DescriptionDescription: Job Overview: This role is called a Mood Lifter, but until that is a word job seekers are typing into Google, we will stick with using the more widely known title of Gym Floor Associate. What is a Mood Lifter, you ask? Mood Lifters are the people who greet each of our members with ear-to-ear smiles, over the top enthusiasm and pretty much know everyone in the club by name. They will run to open the door for you in a driving rainstorm and change a channel so you don’t miss a minute of the big game. They consistently go above and beyond and you can’t help but smile when you see them. Responsibilities: • Greet every member and guest with enthusiasm and a smile, • Tour potential members around the club with the goal of signing up the person for a membership, • Sign members up for startup sessions with Blink Personal Trainers, • Answer phone calls in a professional and energetic manner, • Execute all opening/closing operational procedures to ensure the club runs smoothly, • Handle member requests and concerns with professionalism and a sense of urgency, • Actively participate in ensuring the club is spotless including frequent bending, lifting, and walking around the club to organize equipment and straighten up, • Maintain regular and punctual attendanceRequirements: Qualifications: • Enthusiastic, energetic, friendly and personable, • Excellent verbal and written communication skills, • Able to lift and move gym equipment weighing 15-20 lbs frequently and 45 lbs occasionally, • Able to remain in a stationary position at the front desk for the majority of the workday, • World class customer service skills, • Works hard, multi-tasks and is a problem solver, • Passion for fitness Compensation & Benefits: • Career Advancement opportunities, • Complimentary gym membership, • Medical, Dental, and Vision plans, if work 30 or more hours on average weekly, • 401(k) Retirement savings plan, • Fun working environment!, • Pay Transparency: $17.00/hr About PureGym: The PureGym Group is a leading gym operator headquartered in the UK, boasting over 600 locations and more than 2 million members worldwide. We're thrilled to announce our expansion into the United States! Our commitment to providing high-quality, affordable gyms for everyone, everywhere, remains unwavering. Our mission to inspire healthier nations has made us the UK's favorite gym, and now, an international success story. With our unique "Everybody Welcome" approach, we create a friendly, warm, and inclusive environment for all our employees and members.

Job DescriptionResponsibilities: Shipping: • Check ready orders with CSR that are due for pickup for the day, • Consolidate BOL(s), PL & CI for all the planned shipments, • Schedule the pickup dates & times with the respective forwarders, • Schedule warehouse team to prepare outgoing shipments based on the schedule, • Follow up with CSR on the pickup status of all the shipments, • Assist CSR with UPS/FedEx Labels & documentation, • Confirm all pickups for the day are complete Receiving:, • Schedule incoming shipments with warehouse based on availability & space (NY & CT) Consolidate PLs & COCs for the goods to be received & inspected & hand it to purchasing, • Perform receiving tasks on goods & track partial deliveries (FedEx/DHL/UPS), • Pick products for inspection as required and perform release & notify production, • Add incoming material into inventory lists, • Work with procurement & production departments on high priority shipments to move them first, • Assisting with daily warehouse activities Requirements: Excellent computer skills Bilingual – English / Spanish Certified Forklift/Power-stack operator. High School Diploma Excellent Computer Skills/ Microsoft 365 Able to lift 20+ pounds 1+ years of warehouse experience Forklift Certified Benefits: Medical Dental Vision 401K PTO Rate: $20.00/hr. Powered by JazzHR cgHFRkvpo0

Job DescriptionDescription: About the company Shengsheng Supply Chain Management is an international logistics company that provides professional and integrated solutions for global time and temperature-sensitive cargo transportation. Professionally serving the life science, biotechnology and pharmaceutical research industries, supporting the international end-to-end transportation of clinical trial products, samples, commercial drugs, and biological and IVD reagents worldwide. The scope of services ranges from cold chain transportation, warehousing to customs clearance. At the same time, the technology in cold chain packaging has also been certified by most organizations around the world, and has been praised by thousands of partners and customers. About the job We are looking for a Logistics Associate to join our growing team in New York. This role will work closely with the logistics associates, driver, and station manager. Responsibilities: • Collection/Delivery - Operates all assigned vehicles, single, tandem, or multi axle configurations, forklifts, etc. in accordance with established safety standards, proper vehicle operation techniques and specified time schedules. Acts as the face of Shengsheng for all shipment collections and deliveries and ensures that customer interactions are handled in a pro-active and professional manner at all times., • Packing - Prepares and packages of all specialist packaging and temperature controlled consignments of various temperature zones ensuring all mandatory procedures are adhered to. Re-packs and/or re-ice shipments where necessary and ensuring all mandatory procedures are adhered to., • Documentation - Ensures the correct documentation such as airway bill, delivery slips, and invoices are accurately completed and processed with the shipment. Be aware of the regulations covering the transportation, labelling and packaging of dangerous/hazardous substances and observe and comply with these regulations at all times. Completes necessary paperwork, including accurate logbooks, records of cargo and any other assigned record-keeping duties on a daily basis., • Loading/Unloading - Loads and unloads containers, pallets, or materials and products, safely on trucks, trailers, or railcars by hand or by forklift truck. When loading, ensures loads are evenly balanced and distributed from the front of the trailer to the back and from side to side, as well checks axle weights and loads them in accordance with the DOT regulations., • Warehouse - Performs all necessary duties to maintain a clean, tidy and safe warehouse, ensuring all materials are stored in the designated areas. Reports any shortfalls of packaging stock, to the appropriate person, to ensure minimal stock levels are always maintained. Ensures refridges, freezers and incubator/oven temperatures are checked and remain within prescribed parameters and maintain accurate records thereof. Requirements: Must-Have • GED degree, • Must hold a full, clean driving license, • Must have commercial van/truck driving experience, • Excellent customer service and communication skills Nice-to-Have • Pharmaceutical delivery experience, • TSA Qualified, • Forklift truck operator Key Competencies • Proven ability to work well under time pressure, • Demonstrates a passion for customer service, • Ability to check and maintain accurate documentation

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Reporting to the Senior Director of Environmental, Health and Safety (EHS), the Senior Environmental, Health, and Safety Manager (Sr. EHS Mgr.) will support the development and implementation of the Division environmental, health and safety and security (EHS&S) strategy. Incumbent interfaces with the corporate EHS team to implement corporate initiatives at the Division and Region level. Under limited direction, serve as the Regional contact responsible for evaluating, coordinating development and implementation, and supporting EHS&S risk programs in their assigned region to allow management to monitor, and strengthen compliance with EHS&S regulations. Will take action to support compliance with federal and state EHS&S regulations and requirements including advising managers on safe work methods, practices and the elimination of hazardous conditions and environmental hazards. Investigates incidents including near miss events to identify and reduce root causes at the project and throughout the region and manage the necessary reporting to ensure proper reporting both internally and to external regulatory agencies. The role will require field presence including oversight, operational support, and direction for all EHS programs, working with the corporate team to improve the effectiveness of EHS activities, coach operational safety leaders and provide training to develop and strengthen all staff's knowledge and field execution of safe work and environmental practices. Primary Duties/Responsibilities: • In coordination with the Senior Director of EHS develop and provide safety leadership training, workshops, coaching and resources., • Conduct risk assessments to identify project and region opportunities. Communicate risk and develop, implement, and manage EHS risk reduction plans. Will include support to the EHS audit program., • Serves as a mentor and resource for Site Safety Coordinators and Project Management., • Lead Division training program in consultation with the Senior Director of EHS. Act as Division lead for Corporate training initiatives. Develop EHS training resources and provide field training and coaching for site trainers., • Support safety culture assessments (Deep Dives) and development of strategy to engage staff and improve sustainability of EHS programs., • Support implementation of EHS leading indicator and behavioral based safety, conventional observation and unique implementation for specific project needs, to support proactive safe behaviors., • Provide EHS due diligence for new business and EHS support for Project Start-Ups., • Assist operations with compliance for applicable environmental and H&S regulations., • Coordinates industrial hygiene support to protect employee’s health., • In coordination with the Senior Director of EHS support Senior Leadership team meetings and activities., • Assist in review, update, and development of corporate EHS standards, policies, and procedures., • Manage, assist and support documentation of investigations to ensure identification of causal factors and support risk reduction plans. Includes coordination with workers’ compensation coordinator., • Monitor and maintain EHS data, review OSHA logs, and provide periodic EHS reports., • Assists in the development of Project EHS budgets and Project EHS goal setting. Work Environment: • Spends 40% of time in an office environment and 60% at projects., • Travel may periodically be on short notice., • Project exposure includes facility, remote locations and field environments including work zones., • Frequent travel is expected., • Must be available for on-call response to emergencies., • Possible Work Hazards: May be exposed to hazards including high noise, heavy machinery, chemicals, outside weather conditions and temperature extremes when visiting plant and field environments. Will be routinely required to wear personal protective equipment where appropriate due to location and task hazards. Protective equipment includes, but is not limited to, safety eyewear, footwear, hard hat, gloves, hearing protection, and specialized clothing where applicable. Exposed to possible travel hazards.Qualifications Education/Experience/Background: • Bachelor of Science Degree in Safety, environmental engineering, or equivalent., • 7-10 years of related experience in Environmental, Health & Safety and Security compliance., • 5 years of work experience in the water and wastewater industry, laboratory, or other utility industry., • Successful record of coaching and developing safety engagement and leaders. Knowledge/Skills/Abilities: • Strong coaching, presentation and teaching skills., • Strong communication (oral and written), interpersonal skills and problem solving abilities., • Strong aptitude for strategy development and execution., • Ability to balance changing and potentially conflicting priorities., • Ability to self-organize, prioritize, and drive own work schedule., • Ability to work individually, in a team and interact with all levels within the Region., • Maintain thorough and specialized knowledge of health and safety (OSHA), security (DHS) and environmental (EPA) guidelines and corresponding state requirements., • Willing and able to work with field staff evaluating, coaching, and supporting safety and environmental compliance extensively (70%)., • Willing and able to travel between three facilities in Nassau County (50-70%)., • Must be available (24/7) to respond to & assist with injury and/or environmental emergencies., • Willing to work extended work schedules (as needed) to accomplish Division’s needs., • Proficient knowledge of Google programs including Sheets, Docs, Gmail, and Slides. Required Certification/Licenses/Training: • OSHA 10hr Construction certification or the ability and willingness to obtain this certification is required., • Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH) or the ability and willingness to obtain these certifications is desired., • Must hold a valid driver license with a satisfactory driving record to maintain minimum company required insurance coverage. Physical Requirements: • Regularly stands, walks, climbs stairs and ladders, sits; uses hands and fingers, reaches with hands and arms, stoops, kneels, crouches, or smells., • Ability to tolerate confined spaces, heights, lift and carry materials with the capacity of lifting 50 pounds., • Vision abilities required by this job include distinguishing color, close and distance vision., • Position may require long periods of time sitting in front of and working on a computer., • Position requires frequent travel by auto. Additional Information Pay Range: $115000 to $140000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Company Overview: Schivo Medical manufactures a diverse range of essential medical technology solutions. Collaborating with us, you will be manufacturing or supporting the manufacture of a vast array of different products including robotic surgery instruments, neurosurgical tools, and cardiovascular closure devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will be part of a company committed to helping you build a fulfilling and rewarding career. We provide in-house training in our state-of-the-art facility in Plainview, New York. Shift Hours 6:00am-3:30pm or 4pm-2:00am(night differential CNC Operator Trainee Position Summary: Learn to complete manual machine tasks and run CNC machines. CNC Operator Trainee Essential Duties and Responsibilities: · Ability to interpret a variety of instructions furnished in written, oral, or diagram form. · Loading and unloading of materials into various machines. · General good housekeeping practices within work area. · Review work center for maintenance compliance. · Maintain correct time reporting and accurate entries on applicable manufacturing documentation. · Comply with company quality and safety requirements CNC Operator Trainee Necessary Education, Skills, and Competencies (including licensing and certifications): • High School Diploma, GED or higher education, • Trade school certification a plus, • Machine shop experience using various equipment., • Blueprint reading, • Experience using measuring tools., • Must be mechanically inclined., • Ability to pay attention to a single task for long periods of time., • Ability to communicate and understand verbal and written instructions (English), • Manual machining experience a plus "Maintain a positive and respective attitude, cooperates with co-workers, management, internal and external customers, as applicable (Core values)." Work Environment: • While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts., • The noise level in the work environment is usually moderate., • Ability to work independently in a fast-paced deadline orientated environment., • Must be able to work in a team environment., • Employee is advised to always wear safety glasses and non slip shoes while out on production floor(suggested). Benefits: • 401(k), • Dental insurance, • Health insurance, • Vision insurance, • Generous Paid time off, • Employee referral program, • Free coffee & tea daily, • Employee reward system, • EAP Program Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status

Job DescriptionNow Hiring: Experienced CNC Programmer / Stone Fabricator / Machine Operator Join the Zicana Team Zicana is seeking an experienced CNC Programmer / Stone Fabricator / Machine Operator to join our growing team. We are looking for a highly skilled professional with experience programming and operating CNC equipment used in the fabrication of natural and engineered stone. Qualifications • Experience programming and operating 5-axis bridge saws using AlphaCAM., • Experience operating the CR ACTION MK2 using EasySTONE software., • Experience programming and operating a Northwood SawJet using AlphaCAM., • Proven experience fabricating and processing granite, marble, quartzite, quartz, porcelain, sintered stone, and other natural and engineered stone materials., • Ability to read shop drawings, production tickets, CAD files, and fabrication specifications., • Strong attention to detail with a commitment to producing exceptional quality., • Ability to troubleshoot machining and programming issues., • Ability to work independently while contributing effectively within a team environment., • Dependable, punctual, safety-conscious, and committed to maintaining a clean and organized workspace.Responsibilities, • Program, set up, and operate CNC machines and waterjet equipment safely and efficiently., • Review drawings and determine the most efficient machining strategy for each project., • Monitor machining operations and make adjustments to ensure precision and quality., • Inspect completed components to verify dimensional accuracy and finish quality., • Perform routine machine maintenance and daily equipment care., • Collaborate with the production team to meet fabrication schedules and delivery deadlines., • Maintain a safe, clean, and organized work environment., • Monday–Friday, 3:00 PM – 11:30 PM (subject to change) What We Offer, • Competitive compensation based on experience., • Full-time, year-round employment., • Opportunity to work with state-of-the-art fabrication equipment., • Professional, team-oriented work environment., • Opportunities for long-term career growth and advancement., • Work on some of the most prestigious residential and commercial stone projects in the region.About Zicana At Zicana, we don't simply fabricate stone-we craft extraordinary spaces through precision, innovation, and uncompromising quality. Our team is dedicated to pushing the boundaries of craftsmanship while delivering an exceptional experience for our clients. If you take pride in your work and strive for excellence every day, we'd love to hear from you. Apply Today Please submit your resume along with a brief summary of your experience. Qualified candidates may be asked to demonstrate their programming and machine operating skills during the interview process.

Job DescriptionAbout PTG Proactive Technology Group is an $8M+ managed IT services company serving mid-market businesses across the New York metro area. We are not a lifestyle MSP coasting on break-fix revenue. We are building something: a growth-stage IT services platform with active expansion into cybersecurity compliance, AI consulting, and strategic acquisitions. Our team of 35 operates with an ownership mentality, powered by EOS and a culture that rewards initiative over tenure. If you want a role where you manage a spreadsheet and forward tickets, this is not it. If you want to own a book of business, shape client strategy, and grow alongside a company that is scaling aggressively, keep reading. The Role You will own the full client relationship lifecycle across a portfolio of 15 to 25 managed services accounts. Your job is retention, expansion, and strategic alignment. You are the person our clients call when they need to think through their technology future, not just when something breaks. This is a revenue-generating, client-facing role with real authority. You will run Quarterly Business Reviews, build technology roadmaps, identify expansion opportunities, and serve as the connective tissue between our clients and our technical delivery teams. What You Will Do Own Client Relationships - Manage a defined book of business. Maintain a consistent QBR cadence. Know your clients' businesses well enough to anticipate needs before they surface. Drive net revenue retention above 105%. Build Strategic Roadmaps - Work directly with clients to align their IT investments with business objectives. Translate technical capabilities into business outcomes. Position PTG as a long-term strategic partner, not a vendor. Drive Growth - Identify and close expansion opportunities within existing accounts. Bring proposals that solve real problems, not generic upsells. You will be measured on account growth, not just account maintenance. Onboard New Clients - Partner with sales and engineering to ensure every new client has a seamless transition into our managed services environment. Set expectations, build trust, and establish the rhythm of the relationship from day one. Manage Proposals - Create and deliver customized proposals for new and existing clients. Own the follow-up. Move deals through the pipeline with urgency and precision. Bridge Clients and Delivery - Act as the liaison between your clients and our helpdesk, project, and engineering teams. Ensure issues are resolved fast. Feed client intelligence back to operations to improve service delivery across the board. Requirements What We Are Looking For Required: • 3+ years in account management, • Demonstrated track record of client retention and account growth, • Comfort leading QBRs and presenting technology strategies to non-technical executives, • Working knowledge of the Microsoft 365 ecosystem, • Strong written and verbal communication skills Preferred: • 3+ years in account management within an MSP, IT services, or technology environment, • Experience managing $1M+ in recurring revenue across a client portfolio, • Understanding of cybersecurity compliance frameworks (CMMC, NIST, SOC 2), • Background in mid-market B2B environments, • Familiarity with PSA/RMM platforms (Halo PSA, ConnectWise, Datto, or similar), • CRM proficiency (HubSpot, Salesforce, or equivalent), • Bachelor's degree in business, technology, or related field Benefits • Why PTG, • Growth, not stagnation. We are actively acquiring, launching new service lines, and expanding our footprint. Your career trajectory here has no artificial ceiling., • Operator culture. We run on EOS. Roles are clear. Accountability is real. You will not spend your time navigating politics or waiting for approvals., • Supportive team. 35 people who show up, do the work, and have each other's backs. Leadership is accessible. Wins are recognized. Development is funded., • Comp that reflects contribution. Base salary, monthly commission tied to performance, and a benefits package that covers the fundamentals and then some., • Benefits, • 401(k) with company match, • Health, dental, and vision insurance, • Life insurance, • Paid time off, • Parental leave, • Professional development and certification funding, • Referral program

Job Description MAINTENANCE OPERATOR Full Time | New York, NY Reports To: Property Manager & Assistant Property Manager POSITION SUMMARY A commercial real estate firm is seeking a skilled and motivated Maintenance Operator to support our Long Island retail and commercial portfolio. The ideal candidate is a self-starting professional with hands-on experience across multiple building trades, strong communication skills, and the ability to manage priorities independently while reporting to property management. WORK ASSIGNMENT Long Island Portfolio — Commercial Retail & Office Properties RESPONSIBILITIES Responsibilities include, but are not limited to, the following: • Complete tenant and base building work orders, including plumbing repairs, electrical maintenance, painting, door and hardware repairs, carpentry, and snow removal. All work orders are recorded and tracked using BDG’s Facility Manager App., • Perform electrical maintenance, troubleshooting, and repairs on commercial distribution systems, HVAC and controls, lighting systems, and emergency power systems., • Execute all work to industry-standard quality, including proper preparation, site protection, and clean-up upon completion, in a time-efficient manner., • Perform preventative maintenance tasks including bulb and ballast replacement, filter changes, equipment cleaning and lubrication, belt changes, and alignment—all tracked through BDG’s Facility Manager App., • Operate common and specialty tools safely and proficiently., • Respond to and assist with emergency calls on a 24/7 basis, including weekends and holidays as required., • Overtime hours will be required as needed based on operational demands, emergencies, and after-hours inspections such as monthly site lighting reviews., • Direct and monitor contract workers as needed to support facility operations and maintenance., • Apply knowledge of safety procedures and building trade hazards, including safe lifting of objects weighing up to and over 60 pounds., • Perform physical tasks including prolonged standing, walking, kneeling, climbing ladders, operating man lifts, and working in confined spaces and extreme temperatures., • Maintain professional, collaborative relationships with staff, tenants, vendors, and contractors; work effectively both independently and as part of a team., • Proactively inspect properties, identify problems or abnormalities, perform corrective action, and/or report findings to management promptly., • Report directly to the Property Manager and Assistant Property Manager; provide detailed daily reports., • Prepare and present comprehensive property reports to the Property Manager, documenting the physical condition of properties, maintenance activities, outstanding issues, and recommended corrective actions., • Conduct monthly site lighting inspections at all Long Island properties (typically performed at night; billed as overtime)., • Utilize the Facility Manager App to maintain records of all inspections, preventive maintenance, and repairs in compliance with state, federal, and FDNY requirements., • Keep building storage rooms, maintenance shops, mechanical rooms, and back-of-house areas neat and orderly., • Monitor and adjust temperatures in vacant spaces and mechanical rooms across all properties, including seasonal activation of heaters and heat trace systems., • Maintain and account for all company-issued tools and equipment., • Keep the assigned company utility van current on all required maintenance and services., • Travel regularly between multiple commercial properties across the Long Island portfolio using a company-issued utility van; a valid driver’s license and comfort operating a van are required., • Notify management of supply or special tool needs; place supply orders when authorized and pick up orders as necessary., • Assist with moving equipment or furniture between properties or storage units as needed., • Support on-site and off-site emergency response and unforeseen operational issues., • Record and report utility readings (gas, water, and electric meters) as directed., • Use the ADP App to clock in/out daily and complete weekly timesheets for payroll processing., • Communicate effectively in written and spoken English., • Poper assigned work attire must be always worn and maintain a professional appearance., • Familiarize with and adhere to all company policies as outlined in the Employee Handbook., • Perform additional duties as assigned by management and/or ownership. REQUIREMENTS • High School Diploma or GED equivalent, • 3–5 years of experience in a related field or specific building trade, • Valid driver’s license; must be comfortable operating a utility van, • Ability to respond to emergency calls 24/7, including nights, weekends, and holidays, • Strong working knowledge of commercial building systems and maintenance trades, • Proficiency with common and specialty maintenance tools, • Ability to perform physically demanding tasks in varied environmental conditions PREFERRED QUALIFICATIONS • OSHA Certification, • Experience working independently across multiple sites without direct supervision, • Familiarity with building automation systems (BMS), • Basic plumbing and electrical troubleshooting experience in a commercial setting COMPANY BENEFITS Employee contributions and waiting periods may apply: • 401(k), • Medical Insurance, • Dental Insurance, • Life and Accidental Death Insurance, • Short and Long-Term Disability Insurance, • Flexible Spending Account (FSA)

Job Description Company Overview: Schivo Medical manufactures a diverse range of essential medical technology solutions. Collaborating with us, you will be manufacturing or supporting the manufacture of a vast array of different products including robotic surgery instruments, neurosurgical tools, and cardiovascular closure devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will be part of a company committed to helping you build a fulfilling and rewarding career. We provide in-house training in our state-of-the-art facility in Plainview, New York. Shift Hours 6:00am-3:30pm or 4pm-2:00am(night differential CNC Operator Trainee Position Summary: Learn to complete manual machine tasks and run CNC machines. CNC Operator Trainee Essential Duties and Responsibilities: · Ability to interpret a variety of instructions furnished in written, oral, or diagram form. · Loading and unloading of materials into various machines. · General good housekeeping practices within work area. · Review work center for maintenance compliance. · Maintain correct time reporting and accurate entries on applicable manufacturing documentation. · Comply with company quality and safety requirements CNC Operator Trainee Necessary Education, Skills, and Competencies (including licensing and certifications): • High School Diploma, GED or higher education, • Trade school certification a plus, • Machine shop experience using various equipment., • Blueprint reading, • Experience using measuring tools., • Must be mechanically inclined., • Ability to pay attention to a single task for long periods of time., • Ability to communicate and understand verbal and written instructions (English), • Manual machining experience a plus "Maintain a positive and respective attitude, cooperates with co-workers, management, internal and external customers, as applicable (Core values)." Work Environment: • While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts., • The noise level in the work environment is usually moderate., • Ability to work independently in a fast-paced deadline orientated environment., • Must be able to work in a team environment., • Employee is advised to always wear safety glasses and non slip shoes while out on production floor(suggested). Benefits: • 401(k), • Dental insurance, • Health insurance, • Vision insurance, • Generous Paid time off, • Employee referral program, • Free coffee & tea daily, • Employee reward system, • EAP Program Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status

Job Description 14533 3rd shift Quality Assurance Technician, Hicksville, NY, 3-Month Contract Sigma, Inc. is currently looking for a 3rd shift Quality Assurance Technician to work onsite with our team located at Hicksville, NY. Shift: Monday-Friday, 7PM to 3:30AM, subject to change Shift schedules could include weekends. Hours subject to business needs. Summary / Objective The QA Operator is responsible for all facets of one or more specific Quality Inspection / Monitoring Areas as well as GMP, food safety and security enforcement. Responsible for verification of compliance to food safety policies and procedures. Responsibilities: Milk Receiving: Paperwork Sampling Temperature Check Butter Fat Testing Acidity Testing PH Testing Organoleptic Evaluation Ingredient / Kettle check and release : Paperwork Temperature Check Salt Testing Brix Testing PH Testing Viscosity Testing RS View Kettle Release Organoleptic Evaluation Filler Operations: Paperwork Temperature Check Metal Detector Verification X-ray Verification Seal Testing Code Check Weight Check Retain sample collection Packing Operations: Paperwork Temperature Check Code Check Labeling Check Packaging Evaluation Organoleptic Evaluation Micro & lab Testing Sample collection of water and listeria Plating and Incubation for all Micro Samples including: o Environmental o Shelf life o Eggs, o Milk Pre-Operation check : Paperwork ATP Swabbing Allergen Swabbing Magnet Check Cooler Check Sanitizer concentration Knowledge, Skills, Abilities and Traits: Ability to effectively communicate with associates, leads, supervisors, and production management. Detail and Team oriented. Must be willing to work extended shifts. Ability to comprehend science-based material. Ability to comprehend high school level math, specifically algebra. Decision-making: • Responsible for deciding if an item should be placed on hold and use decision making skills to conclude if in process product is within specification and can be pumped., • Supervisory Responsibilities: Must instruct all employees on any GMP and food safety violations., • Equipment Used: Various lab equipment; Kettle enabling system. Physical Demands Duration: • Standing Majority of shift, • Noise typical of a production environment Entire shift, • Climbing to a height of 8 ft. Daily, • Working in hot/cold temperatures Entire shift

Job Description Schivo Medical is in Plainview, NY. Schivo Medical manufactures medical devices and surgical tools, which enhance people’s lives. Schivo Medical is seeking to hire an experienced Mill/lathe operator, as an employee you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will work side by side with experts in our industry. * Overtime available and night differential CNC Machine Operator Position Overview: A CNC Operator sets up, runs, and monitors numerical control milling machines to cut and shape precision metal or plastic parts. CNC Machine Operator Essential Duties and Responsibilities: • Verify components are produced to print (dimensional and visual inspection), • Change tools., • Make offsets., • Load material and remove scrap., • Fill out various paperwork., • Simultaneous operation of multiple machines, • Minor troubleshooting, • Inspect finished machines parts. CNC Machine Operator Necessary Education, Skills, and Competencies (including licensing and certifications): • 4 years experience with lathe/mill turning machines., • Experience using the Fanuc control preferred., • Must have the ability to read and interpret engineering drawings and blueprints (GD&T symbols)., • Working knowledge of various materials & tools (inserts, endmills, drills), • Ability to work independently with minimal supervision., • Effective communication skills and positive can-do attitude, • Must be dependable and possess a willingness to learn new techniques. Physical requirements: • Ability to stand for several hours., • Ability to lift 50lbs. Benefits: • 401(k), • 401(k)match, • Dental insurance, • Vision Insurance, • Health insurance, • Generous paid time off, • EAP program, • Employee referral program, • Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job DescriptionDescription: Oneida Professional Services (OPS) is actively seeking a highly qualified Nautical Science Instructor (Contingent Faculty) to support the requirements at the United States Merchant Marine Academy (USMMA) in Kings Point, New York. This position supports the Marine Transportation Department and is responsible for delivering high-quality instruction, mentoring Midshipmen, and contributing to departmental and institutional activities *This position is contingent on the award of a federal contract. Key Responsibilities: • Deliver undergraduate-level instruction within the Marine Transportation Department., • Teach Nautical Science courses which may include:, • Introduction to Nautical Science, • Basic & Advanced Firefighting, • Terrestrial Navigation I & II, • Integrated Navigation I, II & III, • Introduction to Navigation Law, • Ship Construction and Stability, • Liquid Cargo Operations, • Dry Cargo Operations, • Maritime Communications I & II, • Maritime Regulatory Environment, • Provide academic mentoring and guidance to Midshipmen., • Conduct course-level assessment activities and maintain academic records., • Participate in scholarly activities, faculty committees, and institutional service assignments., • Develop course materials and manage classroom instruction in accordance with accreditation standards and Academy policies., • Submit mid-term and final grades using the Academy's electronic grading system., • Maintain weekly student office hours and support student success initiatives., • Report directly to the Department Head of Marine Transportation. Requirements: Minimum Qualifications: • Bachelor's degree from an accredited college or university in Marine Transportation or a related field., • Practical experience as a licensed deck officer., • Current U.S. Coast Guard License as Second Mate, Unlimited Tonnage, or higher., • Current STCW credential as amended under the International Convention of Standards of Training, Certification and Watchkeeping for Seafarers (STCW)., • FCC GMDSS Operator endorsement required., • Proficiency with Microsoft Office applications, including Word, PowerPoint, Outlook, and related software., • Excellent verbal and written English communication skills., • Ability to obtain and maintain all required government background and security requirements. Preferred Qualifications, • One or more years of college-level teaching experience., • Tankerman PIC endorsement for Dangerous Liquids (DL) or Liquified Gas (LG)., • U.S. Coast Guard Master of Towing Vessels endorsement., • Dynamic Positioning Officer (DPO) certification and experience., • Experience teaching within a USCG-recognized simulator training facility or maritime academy., • Shoreside vessel management or maritime operations leadership experience., • FCC GMDSS Examiner License. Work Schedule, • Monday through Friday, • 8:00 AM to 4:30 PM (EST), • On-site position; telework and remote work are not available. Benefits (Federal) • 15 Days of Paid Time Off, • 11 Paid Holidays, • 401(k) Retirement Plan with Company Match, • Medical, Dental, and Vision Insurance, • Employee Referral Program, • Tuition Reimbursement, • Employee Assistance Program (EAP), • Wellness Program, • Multiple Voluntary Medical Benefits About Us The Oneida ESC Group is a family of companies owned by the Oneida Nation of Wisconsin that delivers customer-focused engineering, science, and construction services worldwide. Our family of companies includes: • Oneida ESC Group (OESC), • Oneida Professional Services (OPS), • Oneida Total Integrated Enterprises (OTIE), • Mission Support Services (MS2), • Sustainment & Restoration Services (SRS), • Oneida Engineering Solutions (OES), • General Mechanical Corporation (GMC), • LG2 Environmental Solutions (LG2), • Oneida Environmental (OE) We integrate our staff for dedicated, cooperative, and business-like delivery of services to enhance our customers' missions. Equal Employment Opportunity Oneida ESC Group is an equal opportunity employer committed to inclusion and diversity in the workplace. We provide equal employment opportunities to all qualified applicants and employees without regard to any characteristic protected by applicable federal, state, or local law. Oneida ESC Group participates in the E-Verify program and is committed to providing reasonable accommodations to qualified individuals with disabilities.

Job Description We are looking for Central Station Operator who monitors fire alarm signal devices, burglar alarms device. Spanish is a plus. Available shift 3:00pm to 11:00pm weekdays and weekend must have own transportation We do require our staff to have all require papers to be legally employed as well as to be considered for hire we require credible references that will be verified as well as candidates must be able to pass our screening that includes background check, random drug testing, and a valid driver’s license. Candidates with experience are preferred but we are willing to consider training a candidate that make the commitment to grow with our company and most important that you can represent our company in a positive way. If you meet our requirements and are willing to learn and make a commitment you can expect to be appreciated and have a secure future with a secure company that continues to grow. Please reply with detailed information and include any prior employment experiences that should be considered. Qualifications • Excellent work ethic, communication skills, time management skills, and attention to detail, • Troubleshooting skills., • Must have good interpersonal skills and be able to work in a team environment as well as work independently, • Must have a clean driving record and reliable transportation to/from the office or job site.

Job DescriptionLoad Forecasting Specialist Requisition: 82652 PSEG Company: PSEG Long Island Salary Range: $67,200 - $106,400 Work Location Category: Hybrid - Hicksville, NY • Hybrid: A blend of remote and onsite work, with at least three onsite days per week required. As an employee, if you are regularly scheduled to work 20 or more hours per week, you will have access to a wide range of comprehensive benefits designed to support your total well-being: medical, dental, vision, paternal leave and family leave programs, behavioral health programs, 401(k), life insurance, tuition reimbursement, and generous paid time off. More than 13,000 people already call PSEG their work home, taking pride in providing safe, reliable service to millions of customers. If you're looking for a place where you can build a meaningful career and help power and support our communities, we'd love to welcome you to the team.PSEG is not offering visa sponsorship for this position. Job Summary:This position provides analytical support to the Power System Management organization, which includes developing forecasts of electricity use for 1.1 million Long Island customers with annual sales of over 18,000 GWH and a summer peak load of 5,400 MW. Candidates will interact with all members of Power Markets as well as colleagues in Finance, Energy Efficiency, Electric Operations and with Long Island Power Authority (LIPA), New York Independent System Operator (NYISO) and New York State Department of Public Service (DPS). The range of activities for this position may run from analyzing and explaining customer electric use to acting as lead with other PSEG Long Island organizations for financial, resource and reliability planning. The candidate is expected to become the subject matter expert (SME) and to be able to coach and lead others.More specifically, responsibilities will include, but are not limited to, the following: Job Responsibilities: • Monitor electricity use, weather, economic and demographic results and develop variance analyses for reporting to PSEGLI, LIPA and DPS each month., • Participate on the NYISO's Load Forecasting Task Force (LFTF) to ensure compliance with federal, regional and New York State regulatory requirements for reliability., • Prepare written testimony and exhibits supporting PSEGLI's load forecast for DPS Rate Cases., • Respond to requests from federal, regional, state and local authorities for historical and forecasted utility data and analyses., • Develop regression models for the weather normalization and probabilistic distribution of System Peak Demand., • Create spatial load, load pocket, feeder and extreme weather forecast projections to support of Distributed System Implementation Plan (DSIP) goals under the NYS DPS Reforming the Energy Vision (REV) initiative., • Prepare operational analyses and provide recommendations for deployment of real time peak load reduction programs., • Support regulatory proceedings and forecast requirements for Fuel & Purchase Power Cost Projections, Capital Budgets, PSEGLI Integrated Resource Plan, LIPA Financing & Securitization and various ISO filings including FERC 715., • Develop hourly electric load simulations for economic dispatch production cost modeling., • Support other PSEG LI organizations by providing expertise in applied mathematics. Job Specific Qualifications: • Bachelor's degree in Mathematics, Economics, Engineering, Computer Science, or a similar quantitative major., • Minimum of 3 years' experience in quantitative analysis, with at least three years' experience with the utility industry, working for an electric investor-owned or public utility company, a company participating in the electric power markets, as a consultant to a public or private utility, or a similarly situated government policy or regulatory body., • Must have skill in regression analysis., • Demonstrated ability to design and use complex spreadsheets., • Proficient in MS Office Tools., • Must have excellent interpersonal, verbal and written communication skills., • Proficient programming skills in SAS or similar statistical analysis software. Desired: • Master's Degree preferred., • Excellent analytical skills and the ability to identify trends and relationships in data., • Conceptual thinking and creative problem solving abilities., • Capacity to manage multiple projects and meet deadlines., • Convincing oral and written communication skills and the ability to manage complicated processes. Some positions at PSEG require access to information covered by the Department of Energy's regulation 10 CFR 810 (Part 810). If applicable, the successful applicant must prove they are: (1) a citizen or national of the USA; OR (2) a lawful permanent resident of the United States (Non-Conditional Permanent I-551 / Green Card / Permanent Resident Card holder); OR (3) a citizen, national, or permanent resident of a "Generally Authorized" destination on the attached list and not also a citizen, national, permanent resident of any country not listed; OR (4) a "Protected Individual" under the Immigration and Naturalization Act (8 U.S.C 1324b(a)(3)). As an employee of PSEG Long Island, you should be aware that during storm/outage restoration efforts, you may be required to perform functions different from normal operations and work extended hours beyond your regular work schedule. You may also be required to work on premise or in an alternate location as directed by the company. For all roles, PSEGLI's drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing.Employees who are hired or transfer into a federally regulated role (including positions covered by USDOT, PHMSA, or NRC regulations) are subject to random drug and alcohol testing, inclusive of marijuana. Although numerous states throughout the country have legalized marijuana/cannabis products recreationally and medically, the use of these products are prohibited for employees in federally regulated roles. Please note that the use of CBD products may result in a positive drug test for THC/Marijuana and such use is not a legitimate medical explanation for a positive result. If you are a current PSEG employee and offered an opportunity with PSEG Long Island, you will be treated as a new hire. Please note that as a new hire to the Long Island subsidiary, your benefits will change and generally will be consistent with other similarly situated PSEG Long Island new hires. Similarly, for PSEG Long Island employees who accept job opportunities with PSEG or any of its subsidiaries (other than PSEG Long Island), their benefits will change and generally be consistent with other similarly situated new hires of that company. PSEGLI is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic. Legally protected characteristics include race, color, religion, national origin, sex, age, marital status, sexual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals. PSEGLI is committed to providing reasonable accommodations to individuals with disabilities. If you have a disability and need assistance applying for a position, please call 973-430-3845 or email accommodations@pseg.com. If you need to request a reasonable accommodation to perform the essential functions of the job, email accommodations@pseg.com. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision.

Job Description Job description Central Station Alarm Dispatcher / Customer Service Wanted! Long Island based security monitoring company located in the South Nassau Area is looking for motivated individuals to be a part of our customer service / central station / data entry departments. Job duties to include data entry, dispatching alarms to proper authorities and notifying customer of alarm conditions and answering incoming calls. Enter customer account information into account database. Monitor alarm signals and respond to alarms using the information provided on instruction screens. Places necessary outgoing calls to verify an alarm, dispatch the proper authorities, and notify responsible parties. Needs the ability to remain calm and speak clearly to customers. Properly documents all responses for the alarm within the alarm monitoring software. Other duties to be assigned as needed. Great Benefits • Flexible Work Shift and Hours, • 401k with Employer Match, • Available Health Insurance, • Paid Vacation Time After 1 Year Requirements Candidates must possess a minimum of one year customer service or call center experience. Excellent verbal and written communications skills are a must. Knowledge of basic computer functions including Microsoft Windows. Ability to type 20 Wpm minimum. Candidates must possess strong organizational skills, ability to multi-task and be detail oriented. High School Diploma or equivalent is required. Bilingual English / Spanish a Plus Excellent communication and customer service skills. Reliable work ethic. Ability to complete tasks in a timely manner. Needs the ability to prioritize. Needs the ability to work independently or as a team member. Must have the flexibility to work weekends or other shifts. Benefits available. Job Type: Full-time

Job Description Schivo Medical is in Plainview, NY. Schivo Medical manufactures medical devices and surgical tools, which enhance people’s lives. Schivo Medical is seeking to hire an experienced Mill/lathe operator, as an employee you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will work side by side with experts in our industry. * Overtime available and night differential CNC Machine Operator Position Overview: A CNC Operator sets up, runs, and monitors numerical control milling machines to cut and shape precision metal or plastic parts. CNC Machine Operator Essential Duties and Responsibilities: • Verify components are produced to print (dimensional and visual inspection), • Change tools., • Make offsets., • Load material and remove scrap., • Fill out various paperwork., • Simultaneous operation of multiple machines, • Minor troubleshooting, • Inspect finished machines parts. CNC Machine Operator Necessary Education, Skills, and Competencies (including licensing and certifications): • 4 years experience with lathe/mill turning machines., • Experience using the Fanuc control preferred., • Must have the ability to read and interpret engineering drawings and blueprints (GD&T symbols)., • Working knowledge of various materials & tools (inserts, endmills, drills), • Ability to work independently with minimal supervision., • Effective communication skills and positive can-do attitude, • Must be dependable and possess a willingness to learn new techniques. Physical requirements: • Ability to stand for several hours., • Ability to lift 50lbs. Benefits: • 401(k), • 401(k)match, • Dental insurance, • Vision Insurance, • Health insurance, • Generous paid time off, • EAP program, • Employee referral program, • Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job DescriptionWe are looking for Central Station Operator who monitors fire alarm signal devices, burglar alarms device. Spanish is a plus. We do require our staff to have all require papers to be legally employed as well as to be considered for hire we require credible references that will be verified as well as candidates must be able to pass our screening that includes background check, random drug testing, and a valid driver’s license. Candidates with experience are preferred but we are willing to consider training a candidate that make the commitment to grow with our company and most important that you can represent our company in a positive way. If you meet our requirements and are willing to learn and make a commitment you can expect to be appreciated and have a secure future with a secure company that continues to grow. Please reply with detailed information and include any prior employment experiences that should be considered.

Job DescriptionAbout PTG Proactive Technology Group is an $8M+ managed IT services company serving mid-market businesses across the New York metro area. We are not a lifestyle MSP coasting on break-fix revenue. We are building something: a growth-stage IT services platform with active expansion into cybersecurity compliance, AI consulting, and strategic acquisitions. Our team of 35 operates with an ownership mentality, powered by EOS and a culture that rewards initiative over tenure. If you want a role where you manage a spreadsheet and forward tickets, this is not it. If you want to own a book of business, shape client strategy, and grow alongside a company that is scaling aggressively, keep reading. Why PTG • Growth, not stagnation. We are actively acquiring, launching new service lines, and expanding our footprint. Your career trajectory here has no artificial ceiling., • Operator culture. We run on EOS. Roles are clear. Accountability is real. You will not spend your time navigating politics or waiting for approvals., • Supportive team. 35 people who show up, do the work, and have each other's backs. Leadership is accessible. Wins are recognized. Development is funded., • Comp that reflects contribution. Base salary, monthly commission tied to performance, and a benefits package that covers the fundamentals and then some. The Role You will own the full client relationship lifecycle across a portfolio of 15 to 25 managed services accounts. Your job is retention, expansion, and strategic alignment. You are the person our clients call when they need to think through their technology future, not just when something breaks. This is a revenue-generating, client-facing role with real authority. You will run Quarterly Business Reviews, build technology roadmaps, identify expansion opportunities, and serve as the connective tissue between our clients and our technical delivery teams. What You Will Do Own Client Relationships - Manage a defined book of business. Maintain a consistent QBR cadence. Know your clients' businesses well enough to anticipate needs before they surface. Drive net revenue retention above 105%. Build Strategic Roadmaps - Work directly with clients to align their IT investments with business objectives. Translate technical capabilities into business outcomes. Position PTG as a long-term strategic partner, not a vendor. Drive Growth - Identify and close expansion opportunities within existing accounts. Bring proposals that solve real problems, not generic upsells. You will be measured on account growth, not just account maintenance. Onboard New Clients - Partner with sales and engineering to ensure every new client has a seamless transition into our managed services environment. Set expectations, build trust, and establish the rhythm of the relationship from day one. Manage Proposals - Create and deliver customized proposals for new and existing clients. Own the follow-up. Move deals through the pipeline with urgency and precision. Bridge Clients and Delivery - Act as the liaison between your clients and our helpdesk, project, and engineering teams. Ensure issues are resolved fast. Feed client intelligence back to operations to improve service delivery across the board. Requirements Required: • 3+ years in account management., • Demonstrated track record of client retention and account growth., • Comfort leading QBRs and presenting technology strategies to non-technical executives., • Working knowledge of the Microsoft 365 ecosystem., • Strong written and verbal communication skills. Preferred: • 3+ years in account management within an MSP, IT services, or technology environment., • Experience managing $1M+ in recurring revenue across a client portfolio., • Understanding of cybersecurity compliance frameworks. (CMMC, NIST, SOC 2), • Background in mid-market B2B environments., • Familiarity with PSA/RMM platforms. (Halo PSA, ConnectWise, Datto, or similar), • CRM proficiency. (HubSpot, Salesforce, or equivalent), • Bachelor's degree in business, technology, or related field. Benefits • 401(k) with company match., • Health, dental, and vision insurance., • Life insurance., • Paid time off., • Parental leave., • Professional development and certification funding., • Referral program.

Job Description Attention CNC Operators and Machinist Entry level CNC Milling Operator 6 months to 1 year machining experience preferred, but a strong mechanical aptitude and eagerness to learn is essential. Duties and Responsibilities: • Operates assigned work center involving precision tolerances., • Ability to read and interpret mechanical drawings and work from verbal instructions., • Ability to use applicable inspection / measurement equipment: micrometers, calipers etc. as required., • Responsible for verification and documentation of part dimensions and tolerances as required for quality., • Required to visually inspect parts for surface details and machining finishes with a close attention to detail., • Knowledge of general shop math., • The ability to work effectively in a team environment., • Responsible for keeping equipment and work area clean and orderly., • Provide general upkeep and preventative maintenance on assign work center., • Ability to work safely and adhere to company policies and procedures. Perform any other duties assigned by supervisor. \nCompany Description Engineering & Plastic products manufacturing. Engineering & Plastic products manufacturing.

Job Description · Ability to program and operate lathe equipment · Select proper speeds and feeds and wheels · Must be able to hold exacting tight tolerances · Have ability to program, operate lathe equipment · Must have ability to work from production prints and / or sketches · Perform machine lubrication and preventive maintenance · Maintain adherence to engineering tolerances & procedures · Work safely and follow all safety rules · Maintain a clean and organized work area · Take proper care of equipment · Perform other duties as required by supervisors \nCompany Description REQUIREMENTS • Must be a U.S. Citizen or a Green Card holder COMPANY OFFERS -\tGrowing Backlog -\tCompetitive Rate Structure (Depending on Ability and Experience) -\tTrainings -\tGreat Health, Dental and Vision Benefits, Life Insurance Package -\tProfit Sharing and Bonuses -\t401K Matching -\tSafety Equipment -\tModern Equipment and Attractive Shop -\tEqual Employment Opportunity REQUIREMENTS\r\n• Must be a U.S. Citizen or a Green Card holder\r\n\r\nCOMPANY OFFERS\r\n•\tGrowing Backlog\r\n•\tCompetitive Rate Structure (Depending on Ability and Experience)\r\n•\tTrainings\r\n•\tGreat Health, Dental and Vision Benefits, Life Insurance Package\r\n•\tProfit Sharing and Bonuses\r\n•\t401K Matching\r\n•\tSafety Equipment\r\n•\tModern Equipment and Attractive Shop\r\n•\tEqual Employment Opportunity

Job Description We are looking for overnight Central Station Operator who monitors fire alarm signal devices, burglar alarms device. Retired dispatchers or operators a plus. Spanish is a plus. Available overnight shift weekdays and some weekdays. must have own transportation We do require our staff to have all require papers to be legally employed as well as to be considered for hire we require credible references that will be verified as well as candidates must be able to pass our screening that includes background check, random drug testing, and a valid driver’s license. Candidates with experience are preferred but we are willing to consider training a candidate that make the commitment to grow with our company and most important that you can represent our company in a positive way. If you meet our requirements and are willing to learn and make a commitment you can expect to be appreciated and have a secure future with a secure company that continues to grow. Please reply with detailed information and include any prior employment experiences that should be considered. Qualifications • Excellent work ethic, communication skills, time management skills, and attention to detail, • Troubleshooting skills., • Must have good interpersonal skills and be able to work in a team environment as well as work independently, • Must have a clean driving record and reliable transportation to/from the office or job site.

Job Description Overview SEEKING A LEVEL TECHS | MARKET LEADING PAY | BONUSES AVAILABLE Group 1 GMC Rockville Centre is part of the fast-growing Group 1 Automotive, a leader in automotive retail and service. We are growing and looking for Quality Automotive Service Technicians/Mechanics to work with our Quality Dealership, representing the Quality Product! Rockville Centre GMC offers a union shop including a pension and great benefits! Our Service Technicians should be passionate about customer service, take pride in their work, and enjoy being part of a winning team that cares about their employees. Pay Range: $21.00 - $45.00/hour depending on experience We offer: • Market Leading Pay, Based on Experience, Plus Bonuses, • A Great Working Environment with the Latest Equipment, • Structured, Self-paced and Paid Training Opportunities Leading to Manufacturer and Group 1 Recognition, • Health, Dental & Vision Insurance, • Life and Disability Insurance, • 401(k) with company match, • Paid Time-off, • Employee Vehicle Purchase Program, • Employee Stock Purchase Plan, • Pinnacle Awards Program You need… • Automotive Technician/Mechanic Experience, • A Love of Everything Automotive, • A Positive & Friendly Attitude, • Tools Based on your Experience, • Communication Skills, • Basic Computer Skills, • Strong Desire to Provide an Exceptional Client Experience, • Ability to Achieve Targeted Goals, • High School Diploma or Equivalent, • Must have a Valid Driver’s License Group 1 Automotive, a Fortune 250 company, is a leading operator of automotive dealerships and collision centers across the United States and United Kingdom. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. To learn more about our company, visit www.group1auto.com. Apply today or refer a qualified friend. All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment Group 1 Automotive is an Equal Employment Opportunity employer and participates in E-Verify.

WEL Companies | Premium Freight | 70% Linehaul + 86% FSC | Full Truck Payment Protection The Elite Fleet represents the highest level of Independent Contracting at WEL Companies. Designed for owner-operators who consistently demonstrate professionalism, reliability, and operational excellence, the Elite Fleet combines premium refrigerated freight, industry-leading revenue sharing, enhanced financial protection, and a true business partnership. If you're an Independent Contractor looking to maximize profitability while partnering with a carrier that invests in your long-term success, the Elite Fleet is built for you. Revenue & Compensation Elite Fleet Independent Contractors receive: • 70% of linehaul revenue, • 86% of the fuel surcharge (FSC), • 70% of detention pay, • Weekly settlements, • Premium refrigerated freight opportunities, • Competitive fuel discounts Our transparent revenue-sharing model helps you maximize earnings while operating your own business with the support of one of the industry's premier refrigerated carriers. Elite Fleet Advantages Everything included in the Pro Fleet—plus even greater financial protection and access to premium freight opportunities. Full Truck Payment Protection If you're unable to work three or more days during a payroll week due to WEL-related issues, you may qualify for: • A full truck payment credit, • Available once per month (additional approvals available through committee review) This exclusive Elite Fleet benefit helps protect your business during unexpected downtime, allowing you to redirect those savings toward your family's future, retirement planning, business growth, or well-earned time off. Premium Freight Opportunities Elite Fleet contractors receive priority access to: • Premium refrigerated freight, • Consistent year-round customer freight, • Reliable long-haul and regional opportunities, • High-quality freight networks, • Driver-focused dispatch and planning Our goal is to keep your truck productive while helping you maximize profitability. Fuel Savings & Business Support As an Elite Fleet partner, you'll benefit from: • Competitive fuel discounts, • Experienced dispatch and operations support, • Reliable freight planning, • Access to WEL's established customer network, • Dedicated business partnership focused on your long-term success Schedule & Flexibility As an Independent Contractor, you'll continue to enjoy the freedom of operating your own business while working under Elite Fleet expectations and accepted freight commitments. The Elite Fleet is designed for contractors who consistently deliver exceptional service and want access to WEL's highest-level opportunities. Driver Requirements • Valid Class A CDL, • Approved Elite Fleet Independent Contractor, • Ability to operate under WEL's revenue-sharing agreement, • Safe driving record, • Professional attitude and commitment to customer service, • Willingness to fulfill accepted dispatch and freight commitments, • Commitment to maintaining Elite Fleet performance standards Why Partner with WEL Companies' Elite Fleet? The Elite Fleet isn't just another owner-operator program—it's a true business partnership. WEL Companies recognizes that successful Independent Contractors deserve more than competitive revenue sharing. They deserve premium freight, financial protection, operational support, and a carrier invested in helping their business thrive. With premium freight opportunities, industry-leading revenue sharing, enhanced truck payment protection, and a commitment to long-term partnerships, the Elite Fleet provides one of the strongest Independent Contractor programs in refrigerated transportation. Whether you're building wealth, growing your business, planning for retirement, or creating more financial freedom for your family, the Elite Fleet is designed to help you achieve your goals. Apply Today If you're an experienced Independent Contractor looking for premium freight, enhanced financial protection, and a true partnership with a carrier that values your success, apply today to join the WEL Companies Elite Fleet Premium Freight. Maximum Protection. A True Business Partnership. Only at WEL Companies.

CDL-A OTR Driver Jobs | PAM Transport PAM Transport is hiring CDL-A OTR Drivers for our Over-the-Road fleet. We offer both Company Driver and Lease Purchase opportunities with consistent miles, newer equipment, and strong support to keep you moving. Our OTR drivers average 2,500-3,000 miles weekly with home time every 7-10 days. Drivers can earn up to $1,400 per week with additional earning opportunities through bonuses and mentorship programs. At PAM, we focus on keeping drivers on the road - not sitting in the shop. Our fleet includes newer, well-maintained equipment backed by 24/7 office and maintenance support. OTR Driver Benefits • Average weekly pay up to $1,400, • Average 2,500-3,000 miles weekly, • Home every 7-10 days, • Company Driver & Lease Purchase options, • Newer, well-maintained equipment, • 24/7 office & maintenance support, • Bonus and mentorship opportunities, • Steady freight Company Benefits • Medical Insurance, • Dental Insurance, • RX Insurance, • Vision Insurance, • Up to 3% 401(k) company match, • Paid time off, • Family-first culture, • Fuel card & paid toll fees, • Passenger ride-along program, • Career advancement opportunities PAM Lease Purchase Program Become an owner-operator with affordable lease options on 2023-2024 Peterbilt trucks starting at $499/week with an option to purchase at the end of the lease. Lease Highlights • No credit check, • No money down, • No trailer or ELD charges Minimum Qualifications • CDL-A license, • Must not be part of the SAP program, • Must be 21 years or older, • No DWI/DUI within the last 5 years, • Minimum?90 days of?Tractor Trailer Driving Experience, • Other exclusions may apply based on driving record or criminal history

Owner Operators Wanted – Home Daily! ContainerPort Group is now contracting Owner Operators with their own trucks in Newark for home daily, no-touch container freight. A top 10 U.S. drayage carrier, 55 years in the business, moving freight for some of the country's biggest retailers, importers, and exporters. What you can earn: Contractor compensation rates increased by up to 10% Paid fuel surcharge adjusted weekly to keep pace with rising diesel costs • Weekly gross revenues up to $6,000 (depending on market, lanes, and flexibility), • $1,500 sign-on incentive*, • $1,500 referral incentive*, • Weekly settlements with free direct deposit What's moving in Newark right now: • Large-volume regional drop-and-hook accounts, • Regional and OTR opportunities available What we provide: • Consistent contracted freight from a loyal and growing customer mix, • Fuel card and fuel discount program, • Plate program, • 24/7 breakdown support, • Clean DOT inspection incentives, • An IC insurance program offered by True North and facilitated by ContainerPort Group, with customizable medical and dental coverage for you and your family, • DrayPal, our proprietary app for owner operators (Settlements, Documents, and Dispatch all in one place) What we need from you: • Valid Class A CDL, • 12 months verifiable tractor-trailer experience in the last 3 years, • Own your truck and pass DOT inspection, • TWIC Card, • 23 years or older The day to day: • Home every day, or stay out longer. Your choice., • Mostly Monday through Friday, • 1-day orientation at the local Newark terminal, • No forced dispatch, • Fleet Managers who pick up the phone and know your name Apply now or call (855) 274-5627 to talk through what's available in Newark. *Sign-on and referral incentives subject to terms and conditions. Ask your recruiter for details.

Flat Bed- Newark, NJ- POWER ONLY CDL Class A Owner Operator - Flatbed Independent Contract Carrier Opportunity $5,000 Sign-on Bonus Grow Your Business with Consistent Delivery Opportunities RAS Logistics is seeking experienced CDL Class A Owner Operators / Independent Contract Carriers to provide fl

CDL-A OTR Driver Jobs | PAM Transport PAM Transport is hiring CDL-A OTR Drivers for our Over-the-Road fleet. We offer both Company Driver and Lease Purchase opportunities with consistent miles, newer equipment, and strong support to keep you moving. Our OTR drivers average 2,500-3,000 miles weekly with home time every 7-10 days. Drivers can earn up to $1,400 per week with additional earning opportunities through bonuses and mentorship programs. At PAM, we focus on keeping drivers on the road - not sitting in the shop. Our fleet includes newer, well-maintained equipment backed by 24/7 office and maintenance support. OTR Driver Benefits • Average weekly pay up to $1,400, • Average 2,500-3,000 miles weekly, • Home every 7-10 days, • Company Driver & Lease Purchase options, • Newer, well-maintained equipment, • 24/7 office & maintenance support, • Bonus and mentorship opportunities, • Steady freight Company Benefits • Medical Insurance, • Dental Insurance, • RX Insurance, • Vision Insurance, • Up to 3% 401(k) company match, • Paid time off, • Family-first culture, • Fuel card & paid toll fees, • Passenger ride-along program, • Career advancement opportunities PAM Lease Purchase Program Become an owner-operator with affordable lease options on 2023-2024 Peterbilt trucks starting at $499/week with an option to purchase at the end of the lease. Lease Highlights • No credit check, • No money down, • No trailer or ELD charges Minimum Qualifications • CDL-A license, • Must not be part of the SAP program, • Must be 21 years or older, • No DWI/DUI within the last 5 years, • Minimum?90 days of?Tractor Trailer Driving Experience, • Other exclusions may apply based on driving record or criminal history

CDL-A OTR Driver Jobs | PAM Transport PAM Transport is hiring CDL-A OTR Drivers for our Over-the-Road fleet. We offer both Company Driver and Lease Purchase opportunities with consistent miles, newer equipment, and strong support to keep you moving. Our OTR drivers average 2,500-3,000 miles weekly with home time every 7-10 days. Drivers can earn up to $1,400 per week with additional earning opportunities through bonuses and mentorship programs. At PAM, we focus on keeping drivers on the road - not sitting in the shop. Our fleet includes newer, well-maintained equipment backed by 24/7 office and maintenance support. OTR Driver Benefits • Average weekly pay up to $1,400, • Average 2,500-3,000 miles weekly, • Home every 7-10 days, • Company Driver & Lease Purchase options, • Newer, well-maintained equipment, • 24/7 office & maintenance support, • Bonus and mentorship opportunities, • Steady freight Company Benefits • Medical Insurance, • Dental Insurance, • RX Insurance, • Vision Insurance, • Up to 3% 401(k) company match, • Paid time off, • Family-first culture, • Fuel card & paid toll fees, • Passenger ride-along program, • Career advancement opportunities PAM Lease Purchase Program Become an owner-operator with affordable lease options on 2023-2024 Peterbilt trucks starting at $499/week with an option to purchase at the end of the lease. Lease Highlights • No credit check, • No money down, • No trailer or ELD charges Minimum Qualifications • CDL-A license, • Must not be part of the SAP program, • Must be 21 years or older, • No DWI/DUI within the last 5 years, • Minimum?90 days of?Tractor Trailer Driving Experience, • Other exclusions may apply based on driving record or criminal history

CDL-A OTR Driver Jobs | PAM Transport PAM Transport is hiring CDL-A OTR Drivers for our Over-the-Road fleet. We offer both Company Driver and Lease Purchase opportunities with consistent miles, newer equipment, and strong support to keep you moving. Our OTR drivers average 2,500-3,000 miles weekly with home time every 7-10 days. Drivers can earn up to $1,400 per week with additional earning opportunities through bonuses and mentorship programs. At PAM, we focus on keeping drivers on the road - not sitting in the shop. Our fleet includes newer, well-maintained equipment backed by 24/7 office and maintenance support. OTR Driver Benefits • Average weekly pay up to $1,400, • Average 2,500-3,000 miles weekly, • Home every 7-10 days, • Company Driver & Lease Purchase options, • Newer, well-maintained equipment, • 24/7 office & maintenance support, • Bonus and mentorship opportunities, • Steady freight Company Benefits • Medical Insurance, • Dental Insurance, • RX Insurance, • Vision Insurance, • Up to 3% 401(k) company match, • Paid time off, • Family-first culture, • Fuel card & paid toll fees, • Passenger ride-along program, • Career advancement opportunities PAM Lease Purchase Program Become an owner-operator with affordable lease options on 2023-2024 Peterbilt trucks starting at $499/week with an option to purchase at the end of the lease. Lease Highlights • No credit check, • No money down, • No trailer or ELD charges Minimum Qualifications • CDL-A license, • Must not be part of the SAP program, • Must be 21 years or older, • No DWI/DUI within the last 5 years, • Minimum?90 days of?Tractor Trailer Driving Experience, • Other exclusions may apply based on driving record or criminal history

CDL-A OTR Driver Jobs | PAM Transport PAM Transport is hiring CDL-A OTR Drivers for our Over-the-Road fleet. We offer both Company Driver and Lease Purchase opportunities with consistent miles, newer equipment, and strong support to keep you moving. Our OTR drivers average 2,500-3,000 miles weekly with home time every 7-10 days. Drivers can earn up to $1,400 per week with additional earning opportunities through bonuses and mentorship programs. At PAM, we focus on keeping drivers on the road - not sitting in the shop. Our fleet includes newer, well-maintained equipment backed by 24/7 office and maintenance support. OTR Driver Benefits • Average weekly pay up to $1,400, • Average 2,500-3,000 miles weekly, • Home every 7-10 days, • Company Driver & Lease Purchase options, • Newer, well-maintained equipment, • 24/7 office & maintenance support, • Bonus and mentorship opportunities, • Steady freight Company Benefits • Medical Insurance, • Dental Insurance, • RX Insurance, • Vision Insurance, • Up to 3% 401(k) company match, • Paid time off, • Family-first culture, • Fuel card & paid toll fees, • Passenger ride-along program, • Career advancement opportunities PAM Lease Purchase Program Become an owner-operator with affordable lease options on 2023-2024 Peterbilt trucks starting at $499/week with an option to purchase at the end of the lease. Lease Highlights • No credit check, • No money down, • No trailer or ELD charges Minimum Qualifications • CDL-A license, • Must not be part of the SAP program, • Must be 21 years or older, • No DWI/DUI within the last 5 years, • Minimum?90 days of?Tractor Trailer Driving Experience, • Other exclusions may apply based on driving record or criminal history

WEL Companies | 70% Linehaul + 86% FSC | Added Downtime Protection | Grow Your Business Take your independent contracting business to the next level with WEL Companies' Pro Fleet. The Pro Fleet is designed for Independent Contractors who want all the benefits of WEL's standard revenue-sharing program plus additional financial protection and long-term business support. Built around profitability, consistency, and flexibility, the Pro Fleet rewards contractors who are committed to operating at a high level while providing valuable protections that help safeguard your business. If you're looking for consistent refrigerated freight, strong revenue sharing, fuel discounts, and added peace of mind, the Pro Fleet offers an outstanding opportunity to maximize your earnings while protecting your investment. Revenue & Compensation As a Pro Fleet Independent Contractor, you'll receive: • 70% of linehaul revenue, • 86% of the fuel surcharge (FSC), • 70% of detention pay, • Weekly settlements, • Consistent refrigerated freight, • Competitive fuel discounts Our revenue-sharing model is designed to help owner-operators maximize profitability while partnering with a carrier committed to long-term success. Pro Fleet Advantage In addition to everything offered through our Base Independent Contractor program, Pro Fleet contractors receive an added layer of financial protection. Truck Payment Protection If you're unable to work three or more days during a payroll week due to WEL-related issues, you may qualify for: • One-half truck payment credit, • Available once per month (additional approvals available through committee review) This benefit helps offset unexpected downtime, allowing you to bank those savings toward family vacations, retirement, college savings, or future business investments. Freight Opportunities Pro Fleet contractors enjoy access to: • Consistent refrigerated freight, • Premium customer freight, • Reliable year-round freight, • Driver-focused dispatch, • Strong customer relationships, • Long-haul and regional opportunities Our goal is to keep your truck moving and your business profitable. Fuel Savings & Support Partnering with WEL Companies means gaining access to resources that help reduce operating costs and improve efficiency. You'll receive: • Competitive fuel discounts, • Experienced dispatch support, • Reliable freight planning, • Access to WEL's established freight network, • Professional operations support Schedule & Flexibility As an Independent Contractor, you'll maintain the flexibility of operating your own business while honoring accepted dispatch and freight commitments. The Pro Fleet is designed for contractors who are committed to delivering exceptional service while enjoying the freedom of business ownership. Driver Requirements • Valid Class A CDL, • Qualified Independent Contractor or Owner-Operator, • Approved for WEL's Pro Fleet Independent Contractor program, • Ability to operate under a revenue-sharing agreement, • Safe driving record, • Professional attitude and commitment to customer service, • Willingness to accept agreed-upon freight commitments Why Choose the WEL Pro Fleet? The WEL Pro Fleet is built for Independent Contractors who think beyond today's load and are focused on building a successful business for the future. By combining competitive revenue sharing, premium refrigerated freight, fuel discounts, and unique downtime protection, the Pro Fleet provides financial stability that goes beyond traditional owner-operator programs. Whether you're saving for retirement, planning your next vacation, or reinvesting in your business, the Pro Fleet helps you protect your income while continuing to grow your operation. Apply Today If you're an Independent Contractor looking for more than just freight—and want a partner invested in your long-term success—join the WEL Companies Pro Fleet today. Own Your Business. Protect Your Investment. Partner with WEL Companies.

WEL Companies | 70% Linehaul + 86% Fuel Surcharge | Build Your Business Own your business. Control your earnings. Partner with WEL Companies. WEL Companies is looking for professional CDL-A Independent Contractors who want the freedom of business ownership while partnering with a carrier that provides consistent refrigerated freight, competitive revenue sharing, and the support needed to maximize profitability. Our Independent Contractor program is designed for owner-operators who value independence and want access to dependable freight, strong customer relationships, and one of the industry's most respected refrigerated transportation networks. Revenue & Compensation As a WEL Independent Contractor, you'll earn: • 70% of linehaul revenue, • 86% of the fuel surcharge (FSC), • 70% of detention pay, • Consistent refrigerated freight, • Weekly settlements Our revenue-sharing model gives you the opportunity to maximize your earnings while maintaining the independence of operating your own business. Freight Opportunities Independent Contractors enjoy access to: • Consistent refrigerated freight, • Premium customer freight, • Long-haul and regional opportunities, • Reliable year-round freight network, • Driver-friendly dispatch Our goal is simple: keep your truck moving and your business profitable. Fuel Savings & Support Running your own business doesn't mean running it alone. Independent Contractors benefit from: • Competitive fuel discounts, • Experienced dispatch support, • Reliable freight planning, • Access to WEL's established customer network, • Professional operations support Schedule & Flexibility As an Independent Contractor, you'll enjoy the flexibility that comes with running your own business while operating under mutually agreed-upon dispatch commitments. You'll have the freedom to manage your operation while partnering with a carrier committed to helping you succeed. Requirements • Valid Class A CDL, • Owner-operator or qualified Independent Contractor, • Ability to operate under WEL's Independent Contractor agreement, • Professional attitude and commitment to customer service, • Safe driving record, • Willingness to accept agreed-upon dispatch and freight commitments Why Partner with WEL Companies? WEL Companies understands that Independent Contractors are business owners first. That's why we've built a program centered around profitability, consistency, and long-term partnerships—not a traditional company driver model. Our Independent Contractor Fleet focuses on providing dependable refrigerated freight, competitive revenue sharing, fuel discounts, and operational support so you can spend more time growing your business and less time searching for your next load. Whether you're an experienced owner-operator or looking for a carrier that truly values independent business owners, WEL Companies provides the freight, resources, and support to help you succeed. Apply Today If you're ready to partner with a carrier that respects your independence while providing the freight and support to keep your business profitable, apply today and join the WEL Companies Independent Contractor Fleet. Own Your Business. Drive with Confidence. Partner with WEL Companies.