Offres operator à Denver, ColoradoCréer des alertes d'emploi

Job Description: The CV Invasive Specialist II (CVIS II) performs duties necessary for catheterization procedures at a technical and professional level requiring minimal supervision of technical detail. The CVIS II performs a variety of technical procedures that require independent judgment. The CVIS II assumes responsibility and initiative for designated areas and procedures as required. Follows Alliance of Cardiovascular Professionals (ACVP) scope of practice or for Electrophysiology, the NASPE Standards of Professional Practice for the Allied Professional in Pacing and Electrophysiology. Registered Cardiovascular Invasive Specialist (RCIS) or Registered Cardiac Electrophysiology Specialist (RCES ) is required to pass medications. Essential Functions Shift: 0700-1730 / 4 days a week / no set day off and on-call hours To show our commitment to you and to assist with your transition into our organization, we will also offer a $ 20,000 sign-on bonus for experienced RNs. • Perform all of the duties of the CV Invasive Specialist I., • Participate in procedure room preparation and post procedure turn around., • Develop specific knowledge with regard to invasive, diagnostic, and interventional supplies which includes assisting in inventory control. Develops specific knowledge of applications, proper use and deployment techniques including documenting hemodynamic recordings, calculations, and interpretations., • Provide patient education and emotional support for patients and their family members; ensure patient comfort. Foster teamwork and cohesiveness with team members and physicians., • Develop knowledge specific to cardiopulmonary pathophysiology, pharmacology, anatomic anomalies, and treatment options. Assess the condition of the patient, document, and inform physician of deviations from normal criteria throughout the procedure., • Understand and apply principles of x-ray generation and safety. Understand and demonstrate the correct operation of imaging equipment., • May mix and administer medications under the direction and supervision of the physician (RCIS or RCES is required to pass medications). Pursuant to state laws., • At the end of the procedure, may apply closure device, suture the sheath in place, or remove the sheath and apply pressure to obtain hemostasis., • Provide thorough and accurate documentation of each procedure and associated events., • Develop skills in operating, calibrating, and troubleshooting equipment in the Cardiac Catheterization Laboratory. Perform point of care testing and QA., • Accountabilities: Scrub, circulate, and monitor in diagnostic, interventional, and CRM procedures according to scope of practice documents. Complete procedure data entry; acquire and process imaging studies, hemodynamic assessment and calculations, intra-procedure CathPCI registry requirements, and prepare procedural reports. • Has a thorough knowledge of invasive diagnostic and interventional supplies, appropriate indications and applications, and proper use and deployment techniques., • Prepare for patient status changes related to procedural events. Take immediate and appropriate action when status changes occur., • Orient and train staff; teach, coach, mentor, and provide direct supervision as a defined preceptor., • Provide staff education in Skills Day Workshops. Skills • Patient Assessment and Monitoring, • Procedural Assistance, • Equipment Operation and Troubleshooting, • Critical Thinking, • Taking Initiative, • Cardiopulmonary Pathophysiology, • Communication and Collaboration, • Mentorship, • Clinical Care Skills Minimum Qualifications • Basic Life Support Certification (BLS) for healthcare providers., • PALS certification for children's hospitals or ACLS certification for adults. New employees must obtain within 3 months of start., • Beginning March 1, 2026 must be registered as a Registered Cardiovascular Invasive Specialist (RCIS) or Registered Cardiovascular Electrophysiology Specialist (RCES) or ARRT-CI or ARRT-VI only or RN (previous relevant RN experience required), • Demonstrated expertise in performing complex diagnostic and advanced interventional procedures or demonstrated understanding and proficiency in correlation with years of experience with regards to electrophysiology procedures., • Maintains at least 12 hours of continuing medical education (CME) credits per year., • Demonstrates clinical competence of CVIS/CVES skills evidenced by skills sign off, • Surgical Tech/Assistant Certification per state requirements, • Fluoroscopy Operator Certification as required in the state of Colorado Preferred Qualifications • Bachelor's degree in health science program. Education must be obtained through an accredited institution. Degree will be verified., • or –, • Graduate of an accredited Radiologic Technology, Cardiovascular Technology, or Respiratory Therapy program, • One year of Invasive Cardiovascular Technology or Electrophysiology experience (not including academic training or CVIS training). Physical Requirements • Ongoing need for employee to see and read information, labels, assess patient needs, operate monitors, identify equipment and supplies., • Frequent interactions with patient care providers, patients, and visitors that require employee to verbally communicate as well as hear and understand spoken information, alarms, needs, and issues quickly and accurately, particularly during emergency situations., • Manual dexterity of hands and fingers to manipulate complex and delicate equipment with precision and accuracy. This includes frequent computer use and typing for documenting patient care, accessing needed information, medication preparation, etc., • Expected to lift and utilize full range of movement to transfer patients. Will also bend to retrieve, lift, and carry supplies and equipment. Typically includes items of varying weights, up to and including heavy items., • Need to walk and assist with transporting/ambulating patients and obtaining and distributing supplies and equipment. This includes pushing/pulling gurneys and portable equipment, including heavy items. Often required to navigate crowded and busy rooms (full of equipment, power cords on the floor, etc.), • May be expected to stand in a stationary position for an extended period of time., • For roles requiring driving: Expected to drive a vehicle which requires sitting, seeing and reading signs, traffic signals, and other vehicles. Location: Intermountain Health Lutheran Hospital Work City: Wheat Ridge Work State: Colorado Scheduled Weekly Hours: 40 The hourly range for this position is listed below. Actual hourly rate dependent upon experience. $43.09 - $66.47 We care about your well-being – mind, body, and spirit – which is why we provide our caregivers a generous benefits package that covers a wide range of programs to foster a sustainable culture of wellness that encompasses living healthy, happy, secure, connected, and engaged. Learn more about our comprehensive benefits package _. Intermountain Health is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. At Intermountain Health, we use the artificial intelligence ("AI") platform, HiredScore to improve your job application experience. HiredScore helps match your skills and experiences to the best jobs for you. While HiredScore assists in reviewing applications, all final decisions are made by Intermountain personnel to ensure fairness. We protect your privacy and follow strict data protection rules. Your information is safe and used only for recruitment. Thank you for considering a career with us and experiencing our AI-enhanced recruitment process. All positions subject to close without notice.

Job DescriptionDescription: GENERAL POSITION SUMMARY: The Sawcutting Operator is responsible for operating sawcutting equipment to cut concrete and other materials safely and efficiently on demolition or construction sites. This role ensures precise execution of cuts according to project specifications, maintains equipment, and follows all safety protocols to uphold a hazard-free work environment. The Sawcutting Operator collaborates with team members to meet project deadlines and contributes to the overall success of the project. MAJOR DUTIES & RESPONSIBILITIES: Equipment Operation and Maintenance • Operate sawcutting equipment, including wall saws, walk-behind saws,, and core drills, to cut concrete, asphalt, and other materials., • Perform routine maintenance on sawcutting equipment to ensure optimal performance and safety., • Inspect tools and equipment before and after use to identify and address potential issues. Site Preparation and Execution • Set up and mark cutting lines on materials based on project blueprints and specifications., • Assist with preparing job sites for sawcutting activities, including clearing debris and positioning equipment., • Ensure cuts are made with precision to meet project standards and specifications. Safety and Compliance • Follow all site safety protocols and company policies to maintain a safe working environment., • Use personal protective equipment (PPE) as required and ensure proper handling of tools and materials., • Report any hazards, equipment malfunctions, or unsafe conditions to the supervisor immediately. Team Collaboration • Work closely with site supervisors and project managers to ensure tasks are completed on time., • Communicate effectively with crew members to coordinate activities and minimize disruptions., • Assist team members with additional tasks as needed to support project completion. REQUIRED JOB SKILLS & ABILITIES • Proficiency in operating sawcutting tools and equipment., • Ability to read and interpret project blueprints and specifications., • Strong understanding of safety regulations and practices related to sawcutting., • Physical ability to perform labor-intensive tasks, including heavy lifting and prolonged standing., • Excellent attention to detail and precision in executing cuts., • Strong work ethic and ability to meet project deadlines., • Effective communication and teamwork skills. EDUCATION, KNOWLEDGE & EXPERIENCE • High school diploma or equivalent required., • Minimum of 1-2 years of experience in sawcutting or related construction roles preferred., • Familiarity with concrete cutting techniques and equipment maintenance., • OSHA 10 certification preferred or ability to obtain within 90 days of hire. WORKING ENVIRONMENT & CONDITIONS • Outdoor work environment with exposure to varying weather conditions, dust, noise, and debris., • Frequent lifting, carrying, and maneuvering of equipment and materials up to 75 pounds., • Requires standing, bending, and operating equipment for extended periods., • Mandatory use of personal protective equipment (PPE), including hard hats, gloves, safety glasses, hearing protection, and steel-toe boots., • Regular work hours with occasional overtime or weekend shifts based on project demands. KNOWLEDGE, SKILLS AND ABILITIES • Proficient in operating and maintaining sawcutting tools and equipment., • Understanding of material properties and how they affect cutting techniques., • Knowledge of safe work practices and job site safety requirements., • Physical stamina and endurance to perform labor-intensive tasks., • Ability to adapt to changing job site conditions and priorities., • Willingness to learn new techniques and expand skillsets within the field. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required for this job. Duties, responsibilities, and activities may change at any time with or without notice. Requirements:

Job DescriptionDescription:About the Company Direct Edge Media is a fast paced and quickly growing printing company specializing in digital, offset and large format printing for enterprise, agency and trade printers. If you are looking for an opportunity to work in an environment that values your professional skills, Direct Edge Media has a career path for you. We are currently seeking experienced and professional full-time candidates to join our team. Job Summary We are seeking an experienced digital cutting table Operator (Zund, Kongsberg or Gerber) in our Large Format finishing department. The operator will be responsible for the day-to-day cutting production and maintenance of the Zund cutting table. Requirements:Essential Duties and Responsibilities · Read and understand job tickets. Use job ticket information to ensure production is produced according to specification · Perform quality checks according to established procedures to ensure high quality of production · Monitor machine efficiencies & speed to ensure production levels meet or exceed standards & make appropriate adjustments · Work in a safe and efficient manner in accordance with company policies and procedures · Responsible for the overall safety and cleanliness of equipment and area · Perform other duties as assigned Knowledge, Skills, and Abilities: · Ability to set up and operate a digital cutting table such as Zund, Kongsberg or Gerber · Working knowledge of digital, offset, and large format printing processes · A strong attention to detail and focus on quality · Ability to work independently and with minimum supervision · Able to multi task well, remain organized, and handle many projects at one time · Hard-working, assertive, and the ability to work well under pressure in a fast paced environment · Mechanically inclined and production oriented · Ability to communicate effectively with other employees of the organization · Ability to react quickly and make continuous adjustments to provide top quality products · Must be able to read a tape measure and basic computer skills · Able to stand for long periods of time · Must be able to lift and carry a minimum of 40 pounds · Ability to work overtime and weekends when needed Qualifications – Education, Experience, License/Certifications: · Minimum of one years of digital cutting or printing industry experience · High School Diploma Physical Requirements • Standing/Walking: The operator must be able to stand for long periods while working with the cutting table, adjusting settings, and overseeing production processes. This requires stamina and the ability to move around the equipment and workspace efficiently., • Lifting/Carrying: The job requires the ability to lift and carry materials weighing up to 40 pounds, such as large sheets of printed material, tools, and equipment needed for the cutting process., • Manual Dexterity: The role requires excellent hand-eye coordination for operating the cutting table and handling materials with precision. Operators must also be able to perform quality checks, adjust settings, and make quick adjustments while maintaining focus on accuracy., • Repetitive Motion: The operator will perform repetitive tasks such as feeding materials into the machine, operating controls, and making minor adjustments. The ability to maintain efficiency and accuracy during repetitive motions is important., • Vision: Strong visual acuity is necessary to monitor the cutting process, perform quality checks, and read job tickets and specifications to ensure all dimensions and cuts are correct., • Mechanical Skills: A solid understanding of mechanical systems is essential for setting up, operating, and maintaining the digital cutting table, with potential for troubleshooting and performing minor repairs., • Safety and Ergonomics: The operator will be responsible for the safe operation of the equipment and maintaining a clean work area. This includes wearing appropriate personal protective equipment (PPE) and ensuring proper ergonomics to reduce physical strain during long hours of operation., • Environment Adaptability: The position may involve working in environments with varying temperatures, depending on the facility. The operator should be prepared to adjust to different working conditions, including indoor environments with machines and equipment that may generate heat., • Communication: The operator will need to communicate effectively with team members, supervisors, and other employees to ensure a smooth workflow and address any issues that arise during production. Compensation: The base compensation range for this full-time position is $22.00-$24.00 per hour plus benefits. Compensation ranges are determined by various factors, including role, experience, and location. The pay range displayed reflects the minimum and maximum target for new hire salaries for this position. Within the range, actual individual compensation is determined by various factors, including location, job-related skills, experience, and relevant education or training.

Job DescriptionGenerous shift differential for night and weekend shifts Eagle Claw Fishing Tackle is one of the most recognized names in the tackle industry, proudly manufacturing fishing products in Denver, Colorado since 1925. We produce premium quality fishhooks and distribute fishing tackle throughout the US and over 40 countries worldwide. Eagle Claw has never compromised its commitment to “Made in America.” Want to work with passionate people who love the great outdoors? Come be part of the Eagle Claw legacy! Eagle Claw employees enjoy a great work/life balance, paid holidays, paid time off, and excellent benefits including: • 401k Plan with Employer Match, • Medical, Dental, Vision, and Basic Life/AD&D Insurance, • Long-Term Disability, • Voluntary Life Insurance, • Employee Assistance Program, • Medical and Dependent Care Flexible Spending Accounts, • Paid Holidays and Generous Paid Time Off program, • Fishing License reimbursement Position Purpose: To operate finishing and cleaning processes in the department efficiently. Essential Duties: • Operate 1-2 of the processes in the Finishing/Cleaning department on a daily basis., • Maintain proper finishing solutions by following the procedural methods involved and use thereof., • Maintain company OSHA and EPA standards for the storage, handling, and labeling of hazardous materials., • Record daily production and processing of required Quality Control paperwork., • Carry completed product boxes to skids for final inspection., • Observes all safety and good housekeeping regulations of the department and/or company., • Participates in hazardous response activities in the event of a spill or other unusual occurrence involving controlled materials. Other Duties: • Communicates with other department members on the status of work orders and processes., • Performs minor equipment maintenance., • Assists other operators in department as needed., • Performs other similar or less skilled work in the department or other areas of the Company. Knowledge/Skills/Ability and Experience: • Must have high school degree or G.E.D., • Must be able to read, write and be proficient in basic arithmetic skills., • Basic computer skills (Basic EXCEL and WORD skills)., • Requires good visual acuity. Physical Requirements and Working Conditions: • Must be able to work wearing a respirator if required, and physically able to tolerate extreme heat., • Must be able to work with chemicals in the finishing process., • Individual must be capable of successfully completing an initial program of classroom instruction regarding the nature of handling, storage and treatment of hazardous material including all pertinent regulations. Must be willing to continue on the job training on this subject which will be done when deemed necessary by Manager or when new materials or regulations are introduced. This training must include emergency response procedures including shutdown of operations. All training will be done on an annual basis., • May be required to participate in Confined Space Entry training program and take corresponding physical examination., • May be required to use hearing protection and participate in hearing conservation program., • Must be able to lift arms above head and reach arms in all directions., • Must be able to wear safety equipment such as safety glasses, safety shoes, aprons, safety gear. (PPE), • Must be able to lift 30 lbs regularly and up to 50 lbs occasionally., • Must be able to push pull up to 125 lbs pounds in order to use pallet jacks., • Must be able to stand and/or walk for entire 12-hour shift., • Must be able to bend, stoop, twist and reach overhead. At-will Notice: Employment with Eagle Claw is at-will. Employees have the right to end their work relationship with the Company with or without advance notice for any reason. The Company has the same right. This document and any verbal statements made by management are not intended to constitute a contract for employment, not a guarantee for employment. Employment at Eagle Claw Fishing Tackle is contingent on successful completion of background check and drug and alcohol screening. Wright & McGill Co./Eagle Claw Fishing Tackle is an equal opportunity employer, dedicated to promoting a culturally diverse workforce. Monday - Thursday 3:30pm - 2:00am

Job Description Company History: Fathom is one of the largest digital manufacturing platforms offering on-demand manufacturing in North America. With more than 90 large-platform industrial-grade 3D printing machines and a national footprint with more than 500,000 square feet of manufacturing capacity across 10 facilities, Fathom seamlessly blends in-house capabilities across plastic and metal additive technologies, CNC machining, injection molding & tooling, urethane casting, sheet metal fabrication, and design and engineering. With over 50 years of industry experience, Fathom is at the forefront of the industry 4.0 digital manufacturing revolution serving clients in the technology, defense, aerospace, medical, automotive and IOT sectors. Fathom’s extensive certifications include ISO 9001:2015, ISO 9001:2015 Design, ISO 13485:2016, AS9100:2016, NIST 800-171 and ITAR. About the Job Well established precision sheet metal manufacturer is now accepting applications for 1st and 2nd shift press brake operators. This is an opportunity for the right person to join a dynamic team focusing on quality and performance to exceed our customers’ expectations. This individual must have experience with Amada press brakes, the ability to read blueprints, bend deductions, flat pattern layout, bend sequencing, multiple setup, and knowledge of tooling, coining and air bending. The job responsibility will include a drive for continuous improvement in quality and the ability to meet demanding schedules. Qualifications • Technical knowledge of press brake equipment, tooling and the processes. (Amada Equipment), • Ability to read and interpret complex drawings., • 3 years of experience in precision sheet metal manufacturing., • Ability to read calipers and verify part quality., • High School diploma or G.E.D required., • Ability to lift 50 pounds., • Your own tools are required., • Drug screen administered as a condition of employment. Equal Opportunity Employer/Veterans/Disabled This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

Job Description Now Hiring! Bandsaw Operator Location: Denver, CO 80219 Schedule: 5:30AM – 2:00PM, M-F NOVA Automation is seeking a skilled, energetic, and reliable candidate to fill the position of Bandsaw Operator! The Bandsaw Operator is responsible for operating a Bandsaw machine to cut metal, aluminum or plastic materials according to specified dimensions and tolerances. The operator ensures the accurate and safe operation of the saw, performs basic maintenance, and adheres to all safety and quality standards. What’s In It for You: • Pay Range: $19.00 – 25.00 hourly, based on education & experience, • Health, Dental, Vision Insurance, • 401(k) matching, • Employee Assistance Program, • Employee discount, • Company paid time off + holidays, • Development, job growth, and internal training opportunitiesWhat You’ll Do:, • Operate horizontal bandsaw machines to cut raw materials to specified lengths and dimensions., • Interpret and follow job orders, blueprints, work instructions, and cut lists., • Measure and mark material for cutting using measuring tools such as tape measures, calipers, and squares., • Adjust machine settings, including blade tension, speed, and guides, to match material and cutting specifications., • Inspect finished cuts for accuracy and quality; make adjustments as necessary., • Perform routine maintenance on saws, including blade changes, lubrication, and cleaning., • Safely handle raw materials and finished parts using forklifts, hoists, or manual methods., • Maintain a clean and organized work area., • Adhere to all company safety procedures and wear appropriate personal protective equipment (PPE)., • Report equipment malfunctions or safety concerns to supervisors, • Report missing material to supervisor for purpose to get material on order., • To carry out any other duties as are within the scope, spirit, and purpose of the job., • To work in other departments and locations as and when required., • To be prepared to work outside normal working hours, including weekends sometimes at short notice., • Performs other duties as needed to drive to the vision, fulfill the mission and abide by the values of the organization., • Unloading material using a Forklift., • Cutting material on table saw., • Cutting material on a chop saw., • Operate other fabrication tools and equipment as needed.What You’ll Need:, • Ability to follow proper safety protocols., • Ability to read mechanical drawings and blueprints., • Strong attention to detail., • Good literacy & numeracy skills., • Good communication skills., • Good teamwork., • Basic computer skills and familiarity with production software (optional but preferred)., • Familiarity with pneumatic and hydraulic systems., • Forklift operator experience, • Experience with power tools and saws. Education and Experience:, • High school diploma or GED preferred., • Prior experience operating a bandsaw or similar machinery is highly desirable., • Ability to read blueprints, drawings, and measuring instruments., • Good mechanical aptitude and attention to detail., • Familiarity with basic math and measurement conversions (inches to millimeters, fractions, decimals)., • Physical ability to stand for long periods and lift 50 + lbs., • Commitment to workplace safety and quality standards., • Self-motivated and self-directed, • Ability to meet deadlines with limited supervision., • Experience working with or removing heavy metals a plus. Physical Requirements:, • Must be able to lift 50 pounds at a time repetitively., • Must have good hand/eye coordination., • Prolonged periods standing and performing repetitive tasks. Working Conditions:, • Manufacturing or shop floor environment with exposure to noise, dust, and machinery., • May require working overtime or weekends depending on production needs. *All offers of employment are contingent upon successful completion of a background check and drug screening. Who We Are? https://novaautomation.com/ NOVA Automation is an industrial automation company that specializes in engineering, manufacturing, and integrating large-scale packaging and palletizing systems. The company focuses on providing complete end-to-end solutions using automation and robotics for bulk product handling from the storage of material to the palletized product. NOVA's automation systems are built specifically to the customer's needs and are optimized to improve efficiencies and streamline the customer's manufacturing processes. The company operates within North America, South America and Europe and services customers including some of the largest Fortune 500 companies across a multitude of industries. These segments include Chemicals, Food, Flour, Landscape, Minerals, Agriculture, Bio-Fuel, Lugomix, Fertilizer, Sugar, Salt, Industrial Materials, Cement... etc. NOVA is growing and the Automation Service Technician, Robot Programmer role is instrumental in ensuring NOVA Automation's customers are successfully operating NOVA equipment in their production environments. The Service team, based in Denver, CO is responsible for programming, commissioning, upgrading, servicing, and troubleshooting our deployed robotic automation and packaging systems both in-person and remotely. NOVA's Service team is committed to delivering measurable value to our customers and to continually expand that value through improvements to our solutions and processes. We're seeking a few good people to staff-up our Service Team - maybe that's you! EEO Statement: NOVA Automation is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors. E-Verify Statement: NOVA Automation participates in the federal government’s E-Verify program, which confirms employment authorization of all newly hired employees and most existing employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. For all new hires, the E-Verify process is completed in conjunction with the Form I-9 Employment Eligibility Verification on or before the first day of work. E-Verify is not used as a tool to pre-screen candidates. For up-to-date information on E-Verify, go to www.uscis.gov and click on 'E-Verify' located near the bottom of the page. Powered by JazzHR E2OTxlHibI

Job Description Who We Are Advance Pathways is the operator of the Aurora Regional Navigation Campus that addresses the needs of adults facing homelessness in Aurora with a goal for them to gain the needed skills to secure and maintain high quality, dependable employment, and lasting, secure housing. We provide about 300 people per night with emergency shelter and other housing program options as well as day services. Advance Pathways brings together the needed talent, skills, and resources to empower individuals to embark on their journeys to a lifetime of housing stability and personal fulfillment. Following the philosophy of extending a “hand up,” staff at Advance Pathways not only provide needed tools for success, but mentor, train, and inspire the people we serve to achieve their highest potential while offering them the long-term support they need to be successful for a lifetime. Position Summary The Case Manager provides non-clinical, guest-centered services to adult individuals experiencing homelessness. This role focuses on addressing Social Determinants of Health (SDOH) by supporting guests in obtaining identification, accessing benefits, securing housing resources, and connecting with community-based services. Working collaboratively with guests (the unhoused population we serve), the Case Manager conducts needs assessments, develops individualized service plans, and coordinates care to promote stability and self-sufficiency. This position also serves as a liaison between guests and external agencies, advocating on their behalf and helping navigate complex systems. The ultimate goal is to support progress toward housing stability, access to essential resources, employment, and long-term independence. Primary Responsibilities Assessment & Service Planning Conduct intake and ongoing assessments to identify guest needs, strengths, barriers, and Social Determinants of Health (SDOH). Develop, implement, and update individualized service plans that support housing stability, resource access, and self-sufficiency. Case Management and Resource Coordination Provide ongoing case management, goal tracking, and follow-up through regular guest meetings. Assist guests in navigating housing, benefits, healthcare, transportation, employment, legal, and community service systems. Coordinate referrals and serve as a liaison between guests and service providers to ensure access to needed resources. Advocate on behalf of guests with agencies, landlords, healthcare providers, and community partners. Benefits, Documentation and Housing Support Assist guests in obtaining and maintaining identification, benefits, and essential documentation, including birth certificates, Social Security cards, state identification, Medicaid, and SNAP benefits. Support completion, submission, renewal, and follow-up of applications and required documentation. Assist with housing applications, program compliance, placement, and retention efforts. Documentation and Compliance Maintain accurate, timely, and complete case records, including assessments, service plans, referrals, progress notes, and outcomes. Ensure documentation complies with organizational, funding, regulatory, privacy, and confidentiality requirements. Collaboration and Professional Conduct Participate in team meetings and case conferences. Communicate effectively with internal staff and external partners. Maintain professional boundaries, ethical standards, and compliance with organizational policies and procedures. Qualifications Required: Bachelor’s degree in human services or related field Minimum one (1) year experience providing case management or social services to individuals experiencing homelessness or housing instability Knowledge of Social Determinants of Health and community resources Strong organizational, documentation, and advocacy skills Basic computer proficiency and experience with electronic case management systems Ability to pass required background checks Ability to pass urine drug screen Preferred Qualifications Experience in shelter, day center, or housing programs Familiarity with Medicaid, SNAP, SSI/SSDI, and housing systems Experience coordinating services across multiple agencies Bilingual or culturally specific competencies Work Environment and Physical Requirements Primarily homeless shelter based with some community coordination Ability to walk, stand, and move throughout the facility Ability to work in a fast paced, high needs environment Occasional evening or weekend hours as required The successful candidate: Must be drug-free, including THC, and willing to submit to random drug and alcohol screening. Demonstrates alignment with Advance Pathways’ vision and mission. Maintains a positive, growth-oriented mindset and contributes to collaborative problem-solving. Strong time management skills with the ability to meet deadlines consistently. Excellent written and verbal communication skills. Strong administrative and organizational skills. Able to work independently with minimal supervision while maintaining accountability and performance standards. Compensation & Benefits: • Paid Time Off: Begins at 2 weeks per year, • Sick time: Accrued at a rate of 1 hour per every 30 hours worked, • Holidays: 10 paid holidays annually, • Retirement: 403(b) plan with a 3% employer match (vesting schedule applies), • Health Insurance: Comprehensive medical, dental, and vision coverage. Advance, Inc. offers to pay 80% of the health, dental, and vision insurance premium for you (family members are an additional expense) valued at over $10,000 annually. Benefits & Perks: We offer a competitive benefits package designed to support our employees both personally and professionally, including: • Paid Time Off (PTO): Starting at two (2) weeks per year, • Retirement: 403(b) Retirement Savings Plan with a 3% employer match, subject to a vesting schedule, • Holidays: Ten (10) paid holidays annually Work Environment: This is a start-up environment that values high standards of accountability, mutual respect, perseverance in the face of new and evolving challenges, flexibility, and a commitment to continuous improvement. We also believe a sense of humor and the ability to have fun while doing meaningful work are essential to our culture. Disclaimers: Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. This job description is intended to describe the general nature and level of work being performed. It is not designed to be a comprehensive listing of all duties, responsibilities, or qualifications. Duties, responsibilities, and activities may change at any time, with or without notice. Powered by JazzHR pYXRY50iro

Job DescriptionDescription: Dry film photoresist is a critical component utilized in the image transfer process and is widely used in precision etching and electroplating applications, including printed circuit board manufacturing. The Imaging Technician will be responsible for performing all aspects of this process while ensuring adherence to quality standards and production timelines. This role plays a key part in maintaining the integrity and accuracy of imaging operations within the manufacturing workflow. Responsibilities: • Operate all department equipment in accordance with established procedures, including performing quality checks, preventative maintenance, and minor repairs to ensure optimal machine performance, • Accurately enter and track jobs within the manufacturing tracking system to support production flow and traceability, • Read and interpret shop orders to verify completion of prior operations, confirm product counts, and ensure quality standards are met, • Maintain a safe, clean, and organized work environment in compliance with company policies and safety regulations, • Collaborate effectively with team members and support cross-functional operations to meet production goals and deadlines Experience and Education: • Prior experience working in a manufacturing environment is required, • Experience in a similar or related manufacturing industry is preferred, but not required, • High School Diploma or equivalent is preferredRequirements:, • Ability to read, write, and communicate effectively in English in a professional work environment, • Ability to stand for extended periods (8–12 hours) throughout the shift while maintaining productivity and focus, • Ability to safely lift up to 30 pounds without strain and perform physical tasks associated with the role, • Strong attention to detail, organizational skills, and commitment to quality workmanship, • Ability to follow standard operating procedures (SOPs) and adhere to strict quality and safety standards Equal Opportunity Employer AdvancedPCB is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). About AdvancedPCB AdvancedPCB is a leading manufacturer of high-reliability printed circuit boards. The company features six total manufacturing sites: Santa Clara (headquarters in the heart of Silicon Valley), two locations in Southern California, one in Maple Grove, Minnesota, Aurora, Colorado, and Chandler, Arizona. Currently, the company is valued at over $200 million and operates approximately 180,000 square feet of manufacturing space with over 800 employees, making AdvancedPCB one of the largest privately held printed circuit board manufacturers in North America. At AdvancedPCB we provide high-quality electronic PCB assemblies to a diverse customer base across military, medical, and commercial industries. Visit Us: https://www.advancedpcb.com ITAR Requirements: This position is subject to the International Traffic in Arms Regulations (ITAR). In order to comply with ITAR requirements, candidates must be a U.S. citizen, lawful permanent resident (green card holder), or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Candidates must also be eligible to obtain any required authorizations from the U.S. Department of State. Additionally, all applicants must be able to successfully pass a background check as part of the hiring process.

Job DescriptionDescription: Solder Mask/Screening Machine Operator AdvancedPCB, a leading manufacturer in the printed circuit board (PCB) industry, is committed to delivering high-quality products with exceptional turnaround times and reliability. We are seeking dedicated and detail-oriented individuals to join our production team as Solder Mask / Screening Machine Operators. The ideal candidate will be dependable, safety-conscious, and capable of working efficiently in a fast-paced environment while maintaining high standards of quality and productivity. The Solder Mask / Screening Machine Operator is responsible for operating and maintaining equipment used to apply solder mask coatings and perform screen printing processes on printed circuit boards (PCBs). This role ensures products meet quality standards, adhere to specifications, and are processed efficiently in a fast-paced manufacturing environment. Shift: 2nd- 2:30pm-10:30pm 3rd- 10:00pm-6:30am Job Description: The person is required to perform the tasks as described in the screening procedure. These include, but are not limited to, cleaning screens, setting up production screens, stretching new screens as required, screening legend and solder mask inks, applying via plug material, operating multiple types of screening machinery, completing all required logs and documentation, and performing routine housekeeping and general maintenance. This role requires consistent attention to detail, adherence to standard operating procedures, and a commitment to maintaining production efficiency and product quality. Maintain the functionality of all tasks within the Screening Department while ensuring adherence to production schedules, quality standards, and safety protocols. Job Details: • Lift 40–50 pounds regularly for up to 8 hours while following proper safety techniques, • Must be able to stand for extended periods of time during the shift, • Read and understand written procedures, work instructions, and technical documentation, • Follow instructions as required by supervisor or lead with accuracy and accountability, • Follow production schedule to ensure timely completion of work orders, • Education/Orientation, • Company orientation, • Safety Orientation, • Pass all audits and certification requirements while maintaining compliance with company and industry standardsRequirements:, • This is a responsible position, requiring a “whatever it takes” mentality., • Responsible for enforcing all company policies, treating each individual with respect and upholding corporate standards., • Understand all safety equipment., • Strong organizational and computer skills Equal Opportunity Employer AdvancedPCB is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). About AdvancedPCB AdvancedPCB is a leading manufacturer of high-reliability printed circuit boards. The company features six total manufacturing sites: Santa Clara (headquarters in the heart of Silicon Valley), two locations in Southern California, one in Maple Grove, Minnesota, Aurora, Colorado, and Chandler, Arizona. Currently, the company is valued at over $200 million and operates approximately 180,000 square feet of manufacturing space with over 800 employees, making AdvancedPCB one of the largest privately held printed circuit board manufacturers in North America. At AdvancedPCB we provide high-quality electronic PCB assemblies to a diverse customer base across military, medical, and commercial industries. Visit Us: https://www.advancedpcb.com ITAR Requirements: This position is subject to the International Traffic in Arms Regulations (ITAR). In order to comply with ITAR requirements, candidates must be a U.S. citizen, lawful permanent resident (green card holder), or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Candidates must also be eligible to obtain any required authorizations from the U.S. Department of State. Additionally, all applicants must be able to successfully pass a background check as part of the hiring process.

Job DescriptionDescription: 1Vision has one vision: To enable our customers to refine and streamline their communications worldwide with industry-leading expertise and efficiency with data-driven solutions, online marketing portals, state-of-the-art print production, warehouse, and fulfillment. Job Summary In this essential role, the Mailing Operator 2nd shift will successfully coordinate and prioritize all aspects of the production process with substantial focus on producing a finished printed product of superior quality, rapidly and efficiently. Our ideal candidate will be an energetic go-getter who excels in a fast-paced environment, and is seeking an opportunity to learn, develop, and advance within the company. This is a full-time position, 5-days per week. Seasonal overtime will be required. Ask about available relocation assistance for the right highly-qualified candidate. Requirements: Essential Duties and Responsibilities: • Reviews production order details to determine job specifications and schedule, • Sets-up and operates production mailing equipment (camera-based inserters, UV inkjet addressing lines, swing-arm inserters), • Helps other Operators with set-up and operation of other equipment, • Uses a pallet jack or forklift to move raw materials and finished jobs, • Loads and unloads material from machines, • Inspects materials and products for quality, • Makes adjustments and performs basic maintenance, • Keeps a clean and organized work area at all times, • Cross-trains in other areas and continues learning new and improved processes to increase knowledge and understanding of print industry, • Works with management and production team to set, measure, and achieve productivity goals Required Qualifications • 2+ years previous experience in mail manufacturing or in a mail machine operation role, • Interpret and follow directions with precision, • Computer skills for job detail input and machine operation, • Excellent collaborative skills, • Detail-oriented, • Must be able to repeatedly lift and re-stack up to 50lbs throughout shift, • Must be able to stand continuously for the shift, • Willingness to work overtime Benefits- following a wait period of 1st of the month following 30 days of employment. Competitive salary commensurate with experience • 401(k) with 15% company match on employee contribution-90 day wait, • Medical & Dental insurance, • Long term disability insurance, • Employer paid life insurance, • Paid Vacation, • Paid Holidays We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided based on qualifications, merit, and business need.

Job Description Operator I (Food Manufacturing Plant) Join the Sweetest Team in Aurora! Production1st Shift - 3:00 AM-3:00PM Wage $17.53/HR Ready to take your career to the next level? With Dessert Holdings you will help create the desserts people love and celebrate with... Be a part of something sweet! Dessert Holdings is the leading premium dessert company in the world. We craft artisanal, scratch-made desserts at scale, combining culinary innovation with the finest real ingredients. With a rich heritage spanning seven distinctive brands, we bring unmatched expertise and tailored solutions to our Retail and Foodservice partners. Why You'll Love Working Here Work with purpose — you help deliver the desserts people celebrate with. Supportive team environment where your contributions matter. Growth opportunities across multiple departments. Training provided — including certifications! Whether you're building your career or looking for a fresh start, we'll help you grow. Dessert Holdings offers benefits such as a choice of comprehensive medical plans, dental and vision insurance, paid vacation and holidays, and retirement contribution to all eligible employees Opportunity Overview Are you ready to elevate your career in manufacturing operations and be a part of creating the world's best desserts? Dessert Holdings partners with some of North America's most iconic chains to bring people together to celebrate life's sweetest moments! Our team in Aurora, CO is looking for an Operator I. This position is responsible for the safe operations of different baking machinery and is required to provide a consistent quality, following the formula(s) and procedures established by the company without deviation. This position is also responsible for understanding related Quality Management Systems including SQF, HACCP, and GMP to ensure safety and quality of employees and products. The job duties include responsibility for assuring food safety and for food quality for Dessert Holdings products. A supervisor or other person of authority should be notified if any issues or threats to food safety or food quality are observed.What You'll Do Everyday • Must be able to operate mixing, baking and decorating machinery in a safe and efficient manner., • Must maintain production supplies at the prescribed levels so that the line does not shut down for lack of product., • Performs assignments in accordance with established Good Manufacturing Practices (GMP) policies and procedures., • Reads all product formulas, temperatures, and times according to Building of Materials (BOM)., • Coordinate with Production Leads as to product flow for the mixing of batches., • Performs assignments in accordance with specifications, instructions and requirements., • Demonstrates ability to meet production standards on specific assignments within required time., • Ensures that work ethic provides a positive influence on the production floor., • Maintains good housekeeping and clean work areas in assigned space., • Follows production dress code standards and maintains good personal hygiene., • Reports all production waste to Production Lead or Supervisor., • Responsible for food safety and food quality throughout production., • Responsible for notifying a Production Lead when they step off the line to ensure food safety and food quality standards are maintained., • Performs other duties as required by Supervisor., • Understands the management of Quality Systems and is familiar with SQF, HACCP, and GMP practices which help ensure the safety within the workplace and the production of a safe and quality product(s)., • Will perform other duties as required by supervisor What We're Looking For • Must have reliable transportation and be able to work a flexible schedule., • Must be willing to work overtime, including weekends if necessary., • Must be able to read and write in either English or Spanish., • Must be able to work in a fast paced, team environment., • Demonstrates good verbal communication skills., • Able to stay focused in a loud working environment., • Must be able to work in a manufacturing environment requiring strict work/safety rules 100% of the time.About Dessert Holdings Dessert Holdings is a collection of premium dessert companies and brands: The Original Cakerie, Lawler's Desserts, Atlanta Cheesecake Company, Steven Charles, Dianne's Fine Desserts, Kenny's Great Pies, and Willamette Valley Pie Company. Dessert Holdings is owned by Bain Capital, is headquartered in St. Paul, MN, employs more than 3,500 people across ten manufacturing facilities, and is continuing its journey of rapid growth. EEO StatementDessert Holdings and its related entities provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or any other characteristics protected by law.

Job Description **What You Will Do • Use a press brake machine (Amada or Cincinnati), • Read simple blueprints (drawings), • Put programs into the machine, • Set up and change tools (dies), • Bend metal parts to the correct shape, • Measure parts using tools like calipers, • Check your work for quality, • Work on different parts (not the same every day) What You Need • Experience using a press brake machine, • Ability to read blueprints, • Basic measuring skills, • Attention to detail, • Ability to work fast and safely Other Info • No stamping or punching, • Safety training on Day 1, • Must pass drug test and background check You should be proficient in: • Blueprint Reading, • press brake, • amada Machines & technologies you'll use: • Press Brake (Amada, Cincinnati)

Job Description At Vomela our greatest asset is our people. As a full-service visual communications company, we are looking for creative and intellectual thinkers that work with our customers to create compelling brand solutions and foster meaningful connections. And while you're focused on creating big things for global and local brands, we will help you build a career you can be passionate about. Apply now to find your place at Vomela. Hourly Pay Range: $18 - $22 USD Schedule: Monday–Friday, 6:00 AM – 2:30 PM OR 2:00 PM – 10:30 PM What you'll do: • Perform small format finishing and bindery operations, including cutting, binding, punching, saddle stitching, folding, and collating, • Set up and operate bindery equipment to meet job specifications, • Ensure work is completed efficiently, accurately, and to quality standards, • Monitor jobs for accuracy and consistency throughout production, • Troubleshoot basic equipment or job issues as needed, • Maintain a clean, safe, and organized work area, • Collaborate with team members to meet production deadlines, • Perform other duties as assigned Requirements What you'll bring: • 2+ years of experience in bindery and finishing operations preferred, • Proficiency with MBO folders and Challenge (or equivalent) cutters required, • Ability to work efficiently in a fast-paced, high-pressure environment, • Strong attention to detail and problem-solving skills, • Effective verbal and written communication skills, • Self-starter with the ability to work independently and as part of a team, • Willingness to learn; training available for candidates with strong work ethic, reliability, and integrity Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation & Public Holidays), • Short Term & Long Term Disability, • Training & Development, • Wellness Resources

Job Description American Custom Excavation – Denver Metro / Front Range About Us American Custom Excavation is a growing excavation contractor specializing in civil, commercial, and residential work across Colorado. Our projects include site development, utilities (water/sewer/storm), and technical excavation. We are building a strong, reliable crew and are looking for the right person to grow with us. Position Overview This is a hands-on Laborer / Operator role. You will be working alongside experienced operators and leadership, assisting with daily site work while developing into a higher-level operator over time. If you’re looking for a long-term opportunity—not just a job—this is it. What You’ll Do • Assist with excavation, grading, and site prep, • Support underground utility installation (water, sewer, storm), • Trenching support, pipe prep, backfill, and compaction, • Operate skid steer / mini excavator (based on experience), • Load/unload materials and maintain jobsite organization, • Work safely around existing utilities, • Follow direction and communicate clearly with crew Requirements (Read Carefully) • Must show up on time, every day, • Must be willing to perform physical labor outdoors, • Must have reliable transportation, • Must be able to lift 50+ lbs, • Must have a strong work ethic and positive attitude Required • Construction or excavation experience, • Skid steer or mini excavator experience, • Utility work experience (water/sewer/storm) Pay & Growth • $19–$26/hour starting, depending on experience, • Raises based on performance—not time, • Clear path to full equipment operator role, • Opportunity to grow with a fast-scaling company What We’re Looking For We are not looking for someone who needs to be told what to do every minute. We want someone who: • Works hard without being pushed, • Takes pride in their work, • Wants to learn and improve, • Is reliable and consistent Why Join Us • Steady, year-round work, • Strong team environment, • Real opportunity to move up, • Work on a wide variety of projects (not stuck doing the same thing every day) How to Apply Reply to this posting with: • Brief work history, • Equipment experience (if any), • Availability Applications without a short description of your experience will not be considered. Company DescriptionWe are a developing company in a growth phase, offering employees the opportunity to advance as our capabilities, project volume, and market presence continue to expand.We are a developing company in a growth phase, offering employees the opportunity to advance as our capabilities, project volume, and market presence continue to expand.

Job Description About Ripple Ripple produces the most innovative and consistent products in the marijuana market, including: Ripple Dissolvables, the O.G. fast-acting, water-soluble powder; Ripsticks, the most convenient and fun way to get the fastest THC; and Ript, our fast-growing value gummy line. At Ripple, our mission is to improve people's lives through cannabinoids. We give people consistent experiences they can count on, and we give those experiences two times faster. We pride ourselves on great products, great people, and great science. We are singularly focused on quality, which to us means doing things the right way, right from the start. We know that success isn't found in shortcuts or silver bullets. We put in the work, and damn right we're proud of it. This is a wild, wild industry, and we love working in it, but only with those who want to do things right. About the job We're looking for a full-time Production Operator who values safety, trust, accountability, and a strong work ethic. Here at Ripple you'll find a culture that values engagement, flexibility, and high feedback. If you're punctual, positive, and eager to actively participate in building new processes and capacity, this is the place for you. At times, mandatory overtime may be required, and flexible schedules are a must. Hours may change based on business needs. The current schedule is generally M-TH 6:00am - 4:30pm. Schedule subject to change to meet the needs of the business. Overtime may be required from time to time. Essential Duties and Responsibilities: • Packaging and labeling products., • Washing dishes and small wares., • Assist with scheduled cleaning of facility, • Attention to detail and product quality. This is critical to the role., • Perform and record regular quality checks., • Adjust process according to quality results to achieve target quality parameters., • After a successful period of training, set up, shut down, and clean up equipment for daily production., • General maintenance of equipment as required., • Any other duties assigned by the Production Manager or Leads. Qualifications: • Must be 21+ years of age with a current MED Badge or the ability to obtain one., • Manufacturing experience, with food manufacturing experience a plus!, • Able to stand for hours at a time, work in a hot environment, and lift 50 lbs., • Read and write English to be able to understand and follow Good Manufacturing Practices (GMP) and Standard Operating Procedures., • Must be reliable and able to attend the workplace in person daily. What you'll love about us: • We are a team of competent, motivated, diverse, and decent adults., • Named as one of America's Top Cannabis Employers of 2022, we offer: competitive compensation, PTO, 13 paid holidays, paid sick leave, paid parental leave, 80% paid medical benefits and 100% paid dental and vision benefits, 401k and a fun working environment. We too value health, relaxation, and spending time with friends and family!, • We are incredibly transparent about our standards and expectations, and we honor that transparency with honest feedback and timely compensation. We believe trust and accountability are two-way streets., • For more details on the culture we foster, visit: Values, Culture, and Other Stuff Compensation: $20/hr

Job DescriptionDescription:Plating Machine Operator 3rd shift Description Entry Level Production The Plating Machine Operator is responsible for supporting the printed circuit board (PCB) manufacturing process through the operation, monitoring, and maintenance of plating equipment. This position plays a critical role in ensuring product quality, consistency, and adherence to customer specifications. The ideal candidate will demonstrate strong attention to detail, the ability to follow standardized processes, and a commitment to safety while working in a fast-paced production environment involving chemical processes. No prior experience is required—comprehensive paid training is provided to ensure employee success and development. This role is ideal for individuals seeking to begin or grow a career in advanced manufacturing and electronics production. Shifts: 1st shift: 6:00am-2:30pm 2nd shift: 2:00pm-10:30pm 3rd shift: 10:00pm-6:30am **Must be able to work around chemicals. **Printed Circuit Board Experience is a plus! Open Positions: • Plating, • Mechanical, • Quality ControlRequirements:, • Ability to read and interpret technical prints, work instructions, and production documentation with accuracy., • Capability to lift 50+ pounds on a regular basis and perform physically demanding tasks as needed., • Ability to stand for extended periods throughout the duration of the shift in a production environment., • Basic math skills required to perform measurements, calculations, and process-related tasks., • Ability to follow detailed, documented procedures consistently while maintaining high quality standards., • Willingness to successfully complete a background check as part of the hiring process., • Must be able to work safely around chemicals and follow all environmental, health, and safety (EH&S) guidelines., • Printed Circuit Board (PCB) manufacturing experience is a plus but not required. Equal Opportunity Employer AdvancedPCB is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). About AdvancedPCB AdvancedPCB is a leading manufacturer of high-reliability printed circuit boards. The company features six total manufacturing sites: Santa Clara (headquarters in the heart of Silicon Valley), two locations in Southern California, one in Maple Grove, Minnesota, Aurora, Colorado, and Chandler, Arizona. Currently, the company is valued at over $200 million and operates approximately 180,000 square feet of manufacturing space with over 800 employees, making AdvancedPCB one of the largest privately held printed circuit board manufacturers in North America. At AdvancedPCB we provide high-quality electronic PCB assemblies to a diverse customer base across military, medical, and commercial industries. Visit Us: https://www.advancedpcb.com ITAR Requirements: This position is subject to the International Traffic in Arms Regulations (ITAR). In order to comply with ITAR requirements, candidates must be a U.S. citizen, lawful permanent resident (green card holder), or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Candidates must also be eligible to obtain any required authorizations from the U.S. Department of State. Additionally, all applicants must be able to successfully pass a background check as part of the hiring process.

Job DescriptionDescription: Machine Operator - Commercial Millwork Lakewood, CO Full-Time · Lakewood, CO (On-Site) · Employee-Owned Since 1996 100% EMPLOYEE-OWNED (ESOP) At Edge, you’re not just an employee: you’re an owner. As a 100% ESOP company, you receive annual stock grants that grow in value alongside the business. The longer you stay, the more you build. Our employee-owners have seen consistent growth in their ownership accounts, creating real long-term wealth, not just a paycheck. Compensation Overview • Hourly Rate: $22 – $30/hr, Commensurate with experience, • Target Total: $22 – $30/hr + Bonus + ESOP + 401(k) Match About Edge Construction Specialties Since 1996, Edge Construction Specialties has delivered high-quality commercial finish carpentry across the Rocky Mountain region. Our expertise spans architectural woodwork, casework, countertops, upholstery, ornamental metals, decorative glass, specialties, and doors, frames, and hardware. We’re building more than projects, we’re building careers. Our success is driven by an uncompromising commitment to integrity and a “Can Do” culture: anticipating challenges, solving problems, and supporting one another to deliver exceptional results. At Edge, relationships aren’t just important, they are our business. About the Role The Machine Operator is responsible for safely operating production equipment used in the manufacturing of high-quality architectural millwork and commercial casework. This role produces precision components according to engineering drawings and work orders while maintaining company quality standards, production schedules, and safe operating practices. This is a hands-on, shop-floor role ideal for someone who takes pride in craftsmanship and precision. You’ll be cross trained on multiple machines, work alongside a skilled manufacturing team, and have the opportunity to build real equity in the company through our ESOP program. What You’ll Do Safety • Follow all company safety policies and procedures, • Wear required personal protective equipment (PPE), • Maintain a clean, organized work area using 5S principles, • Report unsafe conditions, equipment concerns, or accidents immediately Production • Read and understand work orders, production drawings, and shop paperwork, • Verify materials before beginning production, • Set up and operate assigned machinery safely and efficiently, • Produce parts that meet company quality standards and engineering specifications, • Inspect parts throughout the manufacturing process, • Measure and verify finished parts using appropriate measuring tools, • Meet daily production schedules while maintaining quality expectations, • Label, palletize, and stage completed parts for the next production department, • Maintain accurate production records and complete required paperwork Machine Operation After completing company certification, operate one or more of the following: • Homag Vantech CNC Router, • Holzher Tectra 6120 Panel Saw, • Holzher 1329 Edge Bander, • Gannomat Dowel Machine Equipment Maintenance • Perform daily cleaning and preventative maintenance, • Complete scheduled maintenance assigned to operators, • Monitor tooling and machine performance, • Report maintenance needs promptly, • Assist maintenance personnel during repairs when requested Quality & Teamwork • Produce components that meet company quality standards, • Identify and communicate quality issues before they escalate, • Work cooperatively with Engineering, Assembly, Finishing, and Shipping teams, • Participate in company training and continuous improvement initiatives, • Maintain a positive, professional attitude Benefits & Perks • ESOP Ownership: Annual stock grants — build equity in a company you help grow, • Health Insurance: Medical, dental, and vision coverage, • HSA: Company Contribution, • 401(k) Retirement: Company match included, • Paid Time Off: PTO plus paid holidays, • Discretionary Bonus: Based on performance and company results, • Wellness Program and EAP, • Career Development: Training, equipment certification, and advancement opportunities Requirements: What We’re Looking For Preferred • 2–5 years of experience operating woodworking machinery in a commercial manufacturing environment, • Experience with CNC routers, panel saws, edge banders, or dowel insertion equipment, • Experience with architectural millwork, cabinetry, or commercial casework manufacturing Required • High school diploma or equivalent, • Valid driver’s license, • Ability to read a tape measure accurately and perform basic math, • Mechanical aptitude and strong attention to detail, • Ability to successfully complete Edge Construction Specialties equipment certification program Work Environment This is a full-time, on-site manufacturing role at our Lakewood, CO facility. The role involves working in a production environment with woodworking equipment, wood dust, noise, and varying temperatures. Physical requirements include standing and walking for extended periods, regularly lifting up to 50 lbs, and performing repetitive motions throughout the workday. Extended hours may be required during peak production cycles. Candidates must be authorized to work in the United States. Offer is contingent on successful completion of a background check, drug screening, and reference checks. Ready to Build Something That’s Yours? Join a team of owners who take pride in doing things the right way — for 28 years and counting.

Job DescriptionGet to know us:. Mill Rock Packaging (MRP) is a growing U.S.-based packaging company and a market leader in designing, engineering, and producing high-end, sustainable, and customized graphic paperboard, folding carton, and commercial printing products. We serve customers across industries like food and beverage, technology, health and beauty, pharmaceuticals, and more. What sets us apart? Our culture is built on five core behaviors that guide everything we do: • Lead with Safety – We put people first, always., • Build Trust – We keep our promises and act with integrity., • Innovate and Be Resilient – We embrace challenges and create solutions that raise the bar., • Include and Collaborate – We believe diverse perspectives make us stronger., • Raise the Bar – We strive for excellence in every detail. If you’re looking for a place where these values aren’t just words but actions, you’ll feel right at home here. Curious? Learn more at http://www.millrockpackaging.com! How you'll make an impact:MRP is searching for a passionate and agile Folder/Gluer Operator who considers themselves problem-solvers and are excited by challenges and the opportunity to build something great with us. You MUST have folder gluer experience in folding carton specifically to be considered foe this job. As a Folder/Gluer Operator in the Finishing Department, you will be responsible for setting up and running the folder/gluer machines to produce cartons that meet customer specifications. The ideal candidate will be responsible for maintaining the equipment, tracking the production schedule, giving special instructions to the Packers, and entering job information into the Radius computer program. Gluer Operators are also responsible for communicating and correcting quality issues with QA and the Finishing Lead/Manager. https://www.paycomonline.net/v4/ats/web.php/portal/B497A8621D6AD6B6DEA734C167C97C64/jobs/280538 Join Our Team and Earn up to $4,500!We're passionate about retaining top talent, and we're offering an exciting bonus for qualified applicants for this role. Eligible applicants will receive $1,500 after 90 days and $3,000 after 6 months of full-time employment. Apply now and become a part of the MRP team! What’s in it for YOU? • $22 - $30 per hour., • Safety and people-first and team-oriented culture., • Paid Time Off (PTO): Vacation and sick time plus observed company holidays., • 401K with Employer Match., • Short and Long-term disability insurance., • Life Insurance., • And more! What will you do in this role? • Read and understand work instructions in job ticket/job bag., • Follow production schedule., • Perform a wide range of duties that include locating stock, loads, loading and stacking according to size, shape, quantity to support machine efficiency., • Keep the machine and surrounding area clean and free of debris or workplace hazards., • Perform weekly/monthly TPM tasks and report any broken or worn parts on folder gluer machines to lead/managers., • Operate the folder/gluer machine to produce products that conform with Millrock's quality specifications, • Work around equipment and use tools to set up the folder/gluer machine., • Run initial quantities after setting up the folder/gluer machine to demonstrate production capability., • Perform quality checks as required and report non-conforming cartons to Finishing Manager when discovered., • Responsible for meeting monthly and quarterly efficiency goals by exceeding established production and quality standards. What does it take to be successful in this role?Basic Requirements: • Language Skills – Ability to read and comprehend instructions in English. Ability to communicate verbally and in writing., • Mathematical Skills – Ability to add, subtract, multiply and divide in all units of measurement using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent., • Reasoning Ability – Ability to apply common sense understanding to carry out detailed written or oral instructions. Ability to deal with problems involving concrete variables in standard situations., • Computer Skills – Basic computer skills are required to read work instructions, record job data, follow work schedule, and communicate via email, • Technical Capacity. Strong mechanical aptitude., • Flexible, adaptable and teamwork oriented., • Ability to work overtime as needed., • Perform a variety of tasks throughout the day in a fast-paced work environment., • Ability to respond to continually changing priorities and coordinate multiple projects. Preferred Requirements:We value diverse experiences and perspectives—they help us innovate every day. While these qualifications are preferred, they’re not required: • High school diploma or General Education Degree (GED); or 3-5 years of consistent experience working with folding equipment and/or training; or equivalent combination of education and experience., • Folding carton and SFL carton industry experience., • Experience in one of the following machines:, • Bobst Expertfold folder/gluer machines., • Bobst Fuego folder/gluer., • American International Signature folder/gluer., • Alpina folder/gluer., • Domino folder/gluer. The physical requirements and work environment: Physical Demands: • Standing/Walking: Ability to stand and walk for extended periods (up to 8–12 hours per shift)., • Lifting/Carrying: Regularly lift and move materials up to 50 lbs., • Repetitive Motions: Frequent use of hands and arms for machine operation and material handling., • Visual/Manual Requirements: Ability to read gauges, measure materials, and perform quality checks. Environmental Conditions: • Temperature: Work performed in a manufacturing environment with seasonal temperature variations., • Noise Level: Exposure to moderate to high noise levels; hearing protection provided., • Safety Gear: Personal protective equipment (PPE) such as safety glasses, and gloves., • Other Factors: Occasional exposure to dust, ink, or chemicals used in production. Schedule & Work Hours: • Full-time position; standard schedule is 1st shift (4:00 AM to 2:00 PM) 2nd shift (2:00 PM – 12:00 AM), Monday through Thursday with occasional overtime as needed. The above is intended to describe the general content of and the requirements for satisfactory performance in this position. It is not to be construed as an exhaustive statement of the position's duties, responsibilities, or requirements. Mill Rock Packaging is an equal opportunity employer and does not discriminate based on race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. Recruiting Agencies: Mill Rock Packaging does not accept unsolicited resumes and will not be responsible for any fees associated with them.

Job DescriptionGet to know us:.Mill Rock Packaging (MRP) is a growing U.S.-based packaging company and a market leader in designing, engineering, and producing high-end, sustainable, and customized graphic paperboard, folding carton, and commercial printing products. We serve customers across industries like food and beverage, technology, health and beauty, pharmaceuticals, and more. What sets us apart? Our culture is built on five core behaviors that guide everything we do: • Lead with Safety – We put people first, always., • Build Trust – We keep our promises and act with integrity., • Innovate and Be Resilient – We embrace challenges and create solutions that raise the bar., • Include and Collaborate – We believe diverse perspectives make us stronger., • Raise the Bar – We strive for excellence in every detail. If you’re looking for a place where these values aren’t just words but actions, you’ll feel right at home here. Curious? Learn more at http://www.millrockpackaging.com! How you'll make an impact:MRP is searching for a passionate and agile Folder/Gluer Operator who considers themselves problem-solvers and are excited by challenges and the opportunity to build something great with us. You MUST have folder gluer experience in folding carton specifically to be considered foe this job. As a Folder/Gluer Operator in the Finishing Department, you will be responsible for setting up and running the folder/gluer machines to produce cartons that meet customer specifications. The ideal candidate will be responsible for maintaining the equipment, tracking the production schedule, giving special instructions to the Packers, and entering job information into the Radius computer program. Gluer Operators are also responsible for communicating and correcting quality issues with QA and the Finishing Lead/Manager. Finishing Operator II (Finishing/Gluer Operator) (54751) Join Our Team and Earn up to $4,500! We're passionate about retaining top talent, and we're offering an exciting bonus for qualified applicants for this role. Eligible applicants will receive $1,500 after 90 days and $3,000 after 6 months of full-time employment. Apply now and become a part of the MRP team! What’s in it for YOU? • $22 - $30 per hour., • Safety and people-first and team-oriented culture., • Paid Time Off (PTO): Vacation and sick time plus observed company holidays., • 401K with Employer Match., • Short and Long-term disability insurance., • Life Insurance., • And more! What will you do in this role? • Read and understand work instructions in job ticket/job bag., • Follow production schedule., • Perform a wide range of duties that include locating stock, loads, loading and stacking according to size, shape, quantity to support machine efficiency., • Keep the machine and surrounding area clean and free of debris or workplace hazards., • Perform weekly/monthly TPM tasks and report any broken or worn parts on folder gluer machines to lead/managers., • Operate the folder/gluer machine to produce products that conform with Millrock's quality specifications, • Work around equipment and use tools to set up the folder/gluer machine., • Run initial quantities after setting up the folder/gluer machine to demonstrate production capability., • Perform quality checks as required and report non-conforming cartons to Finishing Manager when discovered., • Responsible for meeting monthly and quarterly efficiency goals by exceeding established production and quality standards. What does it take to be successful in this role?Basic Requirements: • Language Skills – Ability to read and comprehend instructions in English. Ability to communicate verbally and in writing., • Mathematical Skills – Ability to add, subtract, multiply and divide in all units of measurement using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent., • Reasoning Ability – Ability to apply common sense understanding to carry out detailed written or oral instructions. Ability to deal with problems involving concrete variables in standard situations., • Computer Skills – Basic computer skills are required to read work instructions, record job data, follow work schedule, and communicate via email., • Technical Capacity. Strong mechanical aptitude., • Flexible, adaptable and teamwork oriented., • Ability to work overtime as needed., • Perform a variety of tasks throughout the day in a fast-paced work environment., • Ability to respond to continually changing priorities and coordinate multiple projects. Preferred Requirements:We value diverse experiences and perspectives—they help us innovate every day. While these qualifications are preferred, they’re not required: • High school diploma or General Education Degree (GED); or 3-5 years of consistent experience working with folding equipment and/or training; or equivalent combination of education and experience., • Folding carton and SFL carton industry experience., • Experience in one of the following machines:, • Bobst Expertfold folder/gluer machines., • Bobst Fuego folder/gluer., • American International Signature folder/gluer., • Alpina folder/gluer., • Domino folder/gluer. The physical requirements and work environment:Physical Demands: • Standing/Walking: Ability to stand and walk for extended periods (up to 8–12 hours per shift)., • Lifting/Carrying: Regularly lift and move materials up to 50 lbs., • Repetitive Motions: Frequent use of hands and arms for machine operation and material handling., • Visual/Manual Requirements: Ability to read gauges, measure materials, and perform quality checks. Environmental Conditions: • Temperature: Work performed in a manufacturing environment with seasonal temperature variations., • Noise Level: Exposure to moderate to high noise levels; hearing protection provided., • Safety Gear: Personal protective equipment (PPE) such as safety glasses, and gloves., • Other Factors: Occasional exposure to dust, ink, or chemicals used in production. Schedule & Work Hours: • Full-time position; standard schedule is 1st shift (4:00 AM to 2:00 PM) 2nd shift (2:00 PM – 12:00 AM), Monday through Thursday with occasional overtime as needed. The above is intended to describe the general content of and the requirements for satisfactory performance in this position. It is not to be construed as an exhaustive statement of the position's duties, responsibilities, or requirements. Mill Rock Packaging is an equal opportunity employer and does not discriminate based on race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. Recruiting Agencies: Mill Rock Packaging does not accept unsolicited resumes and will not be responsible for any fees associated with them.

Job DescriptionGet to know us:. Mill Rock Packaging (MRP) is a growing U.S.-based packaging company and a market leader in designing, engineering, and producing high-end, sustainable, and customized graphic paperboard, folding carton, and commercial printing products. We serve customers across industries like food and beverage, technology, health and beauty, pharmaceuticals, and more. What sets us apart? Our culture is built on five core behaviors that guide everything we do: • Lead with Safety – We put people first, always., • Build Trust – We keep our promises and act with integrity., • Innovate and Be Resilient – We embrace challenges and create solutions that raise the bar., • Include and Collaborate – We believe diverse perspectives make us stronger., • Raise the Bar – We strive for excellence in every detail. If you’re looking for a place where these values aren’t just words but actions, you’ll feel right at home here. Curious? Learn more at http://www.millrockpackaging.com! How you'll make an impact:MRP is searching for a passionate and agile Folder/Gluer Operator who considers themselves problem-solvers and are excited by challenges and the opportunity to build something great with us. You MUST have folder gluer experience in folding carton specifically to be considered foe this job. As a Folder/Gluer Operator in the Finishing Department, you will be responsible for setting up and running the folder/gluer machines to produce cartons that meet customer specifications. The ideal candidate will be responsible for maintaining the equipment, tracking the production schedule, giving special instructions to the Packers, and entering job information into the Radius computer program. Gluer Operators are also responsible for communicating and correcting quality issues with QA and the Finishing Lead/Manager. Finishing Operator II (Finishing/Gluer Operator) (56113) Join Our Team and Earn up to $4,500!We're passionate about retaining top talent, and we're offering an exciting bonus for qualified applicants for this role. Eligible applicants will receive $1,500 after 90 days and $3,000 after 6 months of full-time employment. Apply now and become a part of the MRP team! What’s in it for YOU? • $22 - $30 per hour., • Safety and people-first and team-oriented culture., • Paid Time Off (PTO): Vacation and sick time plus observed company holidays., • 401K with Employer Match., • Short and Long-term disability insurance., • Life Insurance., • And more! What will you do in this role? • Read and understand work instructions in job ticket/job bag., • Follow production schedule., • Perform a wide range of duties that include locating stock, loads, loading and stacking according to size, shape, quantity to support machine efficiency., • Keep the machine and surrounding area clean and free of debris or workplace hazards., • Perform weekly/monthly TPM tasks and report any broken or worn parts on folder gluer machines to lead/managers., • Operate the folder/gluer machine to produce products that conform with Millrock's quality specifications, • Work around equipment and use tools to set up the folder/gluer machine., • Run initial quantities after setting up the folder/gluer machine to demonstrate production capability., • Perform quality checks as required and report non-conforming cartons to Finishing Manager when discovered., • Responsible for meeting monthly and quarterly efficiency goals by exceeding established production and quality standards. What does it take to be successful in this role?Basic Requirements: • Language Skills – Ability to read and comprehend instructions in English. Ability to communicate verbally and in writing., • Mathematical Skills – Ability to add, subtract, multiply and divide in all units of measurement using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent., • Reasoning Ability – Ability to apply common sense understanding to carry out detailed written or oral instructions. Ability to deal with problems involving concrete variables in standard situations., • Computer Skills – Basic computer skills are required to read work instructions, record job data, follow work schedule, and communicate via email, • Technical Capacity. Strong mechanical aptitude., • Flexible, adaptable and teamwork oriented., • Ability to work overtime as needed., • Perform a variety of tasks throughout the day in a fast-paced work environment., • Ability to respond to continually changing priorities and coordinate multiple projects. Preferred Requirements:We value diverse experiences and perspectives—they help us innovate every day. While these qualifications are preferred, they’re not required: • High school diploma or General Education Degree (GED); or 3-5 years of consistent experience working with folding equipment and/or training; or equivalent combination of education and experience., • Folding carton and SFL carton industry experience., • Experience in one of the following machines:, • Bobst Expertfold folder/gluer machines., • Bobst Fuego folder/gluer., • American International Signature folder/gluer., • Alpina folder/gluer., • Domino folder/gluer. The physical requirements and work environment: Physical Demands: • Standing/Walking: Ability to stand and walk for extended periods (up to 8–12 hours per shift)., • Lifting/Carrying: Regularly lift and move materials up to 50 lbs., • Repetitive Motions: Frequent use of hands and arms for machine operation and material handling., • Visual/Manual Requirements: Ability to read gauges, measure materials, and perform quality checks. Environmental Conditions: • Temperature: Work performed in a manufacturing environment with seasonal temperature variations., • Noise Level: Exposure to moderate to high noise levels; hearing protection provided., • Safety Gear: Personal protective equipment (PPE) such as safety glasses, and gloves., • Other Factors: Occasional exposure to dust, ink, or chemicals used in production. Schedule & Work Hours: • Full-time position; standard schedule is 1st shift (4:00 AM to 2:00 PM) 2nd shift (2:00 PM – 12:00 AM), Monday through Thursday with occasional overtime as needed. The above is intended to describe the general content of and the requirements for satisfactory performance in this position. It is not to be construed as an exhaustive statement of the position's duties, responsibilities, or requirements. Mill Rock Packaging is an equal opportunity employer and does not discriminate based on race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. Recruiting Agencies: Mill Rock Packaging does not accept unsolicited resumes and will not be responsible for any fees associated with them.

Job Description Overview Batch Plant Laborer Wage Range: $25 to $28 per hour WW Clyde is seeking a batch plant operator with general construction experience to join our Denver area team. Responsibilities: • Proper operation and maintenance of a central mix concrete batch plant with a RexCon RC3 Batching system, • Will work cooperatively with the placement operations in the production of high-quality concrete at the times and volumes required by the placement crews, • Responsible for the training and performance of all assigned subordinates (loader operators charging plant, plant helpers and others as assigned)., • Perform physical labor at construction sites, • May operate hand and power tools of all types, • Able and willing to work on several projects at one time, • Ability to focus on tasks at hand, • Must work well with others, • Regular and timely attendance is essential and must conform to the company's hours of operation, • Other duties as assigned Qualifications: • Must have concrete crew experience, • Willing to travel, • Must be at least 18 years of age, • Ability to lift/push/pull at least 20 pounds WW Clyde IS AN EQUAL OPPORTUNITY / AFFIRMATIVE ACTION EMPLOYER

Job Description Oven Operator(Food Manufacturing Plant) Join the Sweetest Team in Aurora! Production 2ndShift - 3:00 PM-3:00AM Wage $17.60/HR Ready to take your career to the next level? With Dessert Holdings you will help create the desserts people love and celebrate with... Be a part of something sweet! Dessert Holdings is the leading premium dessert company in the world. We craft artisanal, scratch-made desserts at scale, combining culinary innovation with the finest real ingredients. With a rich heritage spanning seven distinctive brands, we bring unmatched expertise and tailored solutions to our Retail and Foodservice partners. Why You'll Love Working Here Work with purpose you help deliver the desserts people celebrate with. Supportive team environment where your contributions matter. Growth opportunities across multiple departments. Training provided including certifications! Whether you're building your career or looking for a fresh start, we'll help you grow. Dessert Holdings offers benefits such as a choice of comprehensive medical plans, dental and vision insurance, paid vacation and holidays, and retirement contribution to all eligible employees Opportunity OverviewAre you ready to elevate your career in manufacturing operations and be a part of creating the world's best desserts?Dessert Holdingspartners with some of North America's most iconic chains to bring people together to celebrate life's sweetest moments!We are currently looking for an Oven Operator to join our team based in Aurora, CO!The Oven Operator is responsible for running quality product by following procedures established by the company without deviation. Ensure that all products are produced safely, efficiently and meet all quality standards as set forth by the company. This position is also responsible for understanding related Quality Management Systems including SQF, HACCP, and GMP to ensure safety and quality of employees and products. The job duties include responsibility for assuring food safety and for food quality for Steven Charles products.What You'll Do Every Day • Contributes to the team effort by accomplishing related tasks and contributing to process and operations improvement., • Follow GMP's, safety and work instructions, • Advise Production Supervisor/Lead (Mixing and Packaging) or Q.A. inspector of any quality or other problems, which may affect the production, efficiency or consistency in product or performance., • Responsible for the cleanliness of the area. Housekeeping must be performed regularly during the shift., • Must understand the company's food allergen program., • Able to start up ovens and make the required adjustments to the flames, injector's head and speed to get the quality expected., • Able to do changeover with minimum amount of downtime., • Recognize when ovens are not working properly and notify Lead/Supervisor of any changes., • Ability to do a complete training for oven operators., • Maintain a 5% or less in waste., • Must be able to understand SPC ( Statistical Process Control ) and input data, • Must be able to tell good quality from poor quality, • Must be able to communicate with mixers, leads & quality of any issues, • Troubleshoot and immediately report product or machine failures, • Complying with and having thorough knowledge of all Steven Charles product quality standards, policies and procedures., • Contributing and encouraging contribution to the Steven Charles team effort., • Understands the management of Quality Systems and is familiar with SQF, HACCP, and GMP practices which help ensure the safety within the workplace and the production of a safe and quality product(s).What We're Looking For, • Minimum of 6 months -1 year of experience in a Food Manufacturing., • High school diploma or general education degree (GED); or six months to one year related experience and/or training; or equivalent combination of education and experience., • Ability to add, subtract, multiply, and divide in all units of measure., • Flexibility to work various hours and shiftsAbout Dessert Holdings Dessert Holdings is a collection of premium dessert companies and brands: The Original Cakerie, Lawler's Desserts, Atlanta Cheesecake Company, Steven Charles, Dianne's Fine Desserts, Kenny's Great Pies, and Willamette Valley Pie Company. Dessert Holdings is owned by Bain Capital, is headquartered in St. Paul, MN, employs more than 3,500 people across ten manufacturing facilities, and is continuing its journey of rapid growth. EEO StatementDessert Holdings and its related entities provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or any other characteristics protected by law.

Job Description Freezer Operator – 2nd Shift About Dessert Holdings Ready to take your career to the next level? With Dessert Holdings you will help create the desserts people love and celebrate with... Be a part of something sweet! Dessert Holdings is the leading premium dessert company in the world. We craft artisanal, scratch-made desserts at scale, combining culinary innovation with the finest real ingredients. With a rich heritage spanning seven distinctive brands, we bring unmatched expertise and tailored solutions to our Retail and Foodservice partners. Why You'll Love Working Here • Work with purpose — you help deliver the desserts people celebrate with., • Supportive team environment where your contributions matter., • Growth opportunities across multiple departments., • Training provided — including certifications!, • Whether you're building your career or looking for a fresh start, we'll help you grow. Dessert Holdings offers benefits such as a choice of comprehensive medical plans, dental and vision insurance, paid vacation and holidays, and retirement contribution to all eligible employees. What You'll Do Everyday • Properly count work in process product from production place into WIP Freezer, • Ensure Product is covered and properly put away and tracked qty and location, • Conduct cycle counts daily for correct inventory, • Stages WIP product for operations, • Tracks the qty and product in and out of the WIP Freezer, • Responsible for quality control; no damage product allowed into freezer and must be properly stored, • Operates within standard operating procedures (SOPs), • Safely utilize pallet jacks, • Completes shift logs of product in and out of WIP freezer, • Cleans and maintains work area clean at all times, • Turns off and locks out equipment when not in use, • Understands the management of Quality Systems and is familiar with SQF, HACCP, and GMP practices which help ensure the safety within the workplace and the production of a safe and quality product(s) What We're Looking For • Must have reliable transportation and be able to work a flexible schedule, • Must be willing to work overtime, including weekends if necessary., • Must be able to read and write in either English or Spanish., • Must be able to work in a fast paced, team environment., • Must be able to work in Freezer environment, • Must be able to work in a manufacturing environment requiring strict work/safety rules 100% of the time., • Must be able to work in Freezer environments, • Able to stand for at least ten hours per day and may have various repetitive motion duties, • Use hands and fingers to handle objects, tools or controls; reach with hands and arms, • Must be able to stoop, kneel or bend. Employee must lift up to 50 pounds and is required to ask for assistance if limit is exceeded, • Must be able to keep eyes focused on a conveyor belt for a maximum five hours at one time, • Must be able to work in a food allergens environment About Dessert Holdings Dessert Holdings is a collection of premium dessert companies and brands: The Original Cakerie, Lawler's Desserts, Atlanta Cheesecake Company, Steven Charles, Dianne's Fine Desserts, Kenny's Great Pies, and Willamette Valley Pie Company. Dessert Holdings is owned by Bain Capital, is headquartered in St. Paul, MN, employs more than 3,500 people across ten manufacturing facilities, and is continuing its journey of rapid growth We pride ourselves on the best ingredients, chef-inspired recipes, and a culture rooted in teamwork, respect, and quality. EEO Statement Dessert Holdings and its related entities provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or any other characteristics protected by law.

Job DescriptionSalary: $25- $35 Hourly Position: Reclamation Operator Department: Seeding Reports to: Manager Operating reclamation equipment, including tractors, seeding implements, and hydroseeders. Install seeding BMPs in accordance with DTECs quality and output standards while meeting the client expectations and municipality requirements. Successful operators will be the example for quality, safety, and output as well as modeling DTECs values. Act as field ambassador to the public. Key Tasks and Responsibilities: • Has knowledge and ability to install various seeding products (tractor seeding, skid seeding, hydro seeding, amendments). • Required to use PPE and follow DTECs safety policies and procedures., • Contributes to maintenance of all seeding equipment (applying grease, tightening bolts, cleaning radiators and air filters, cutting strings, rinsing/cleaning hydroseeding rig). • Ensuring production is as efficient as possible while minimizing downtime., • Proactively identify and avoid potential hazards., • Proactively reduce material waste., • Meticulously maintain the appearance of equipment and jobsites., • Always conduct themselves in a professional manner., • Clean the jobsite and truck at the end of each day and leave it in better condition than it was found., • Understand, agree, and commit to DTEC company values., • Able to lift up to 75 pounds., • Communicate with manager daily, • Perform other duties as assigned. Skills and Attributes: • Maintain an outstanding pace of work consistently through 8-12 hour shifts., • Punctual and reliable., • Complete understanding of proper seeding process procedures., • Uses effective judgement benefiting the client, the company, and the team., • Follows instructions given by the Seeding Manager., • Appropriate appearance. Positive attitude. Respectable Communication with clients and all employees., • Creatively overcomes obstacles and committed to outstanding results. Must Have: • Drivers license, • Pass drug test, • CDL Benefits: We offer Competitive Compensation. Medical, Dental & Vision Benefits. PTO, and Bonus Programs, and an awesome work culture. We do require that you are able to pass a pre-employment drug test and participate in our ongoing drug testing program. Impact on the Organization Exceptional operators are a key competitive advantage for DTEC. They will allow DTEC to maintain a flat organization that responds with outstanding speed to customers, competitive pressures, and market opportunities. A successful operator will contribute to the vitality and financial health of the business. A successful operator will develop personally and contribute to a crew that excels and thrives in a variety of environments.

Job DescriptionDescription: In 2024, Follett Products, LLC, expanded its PA manufacturing capabilities with the addition of Kloppenberg in Denver, CO, which is now operating as Follett Denver. Follett Denver is a manufacturer of superior-quality ice storage, ice transport, and ice dispensing systems, serving the market with both the Follett and Kloppenberg brands. Follett Denver is a proud member of the Middleby Corporation family of companies. Follett Denver currently has an opportunity for a Brake Operator to join our team! Job Summary The Press Brake Operator will use a press brake to form sheet metal parts in accordance with drawings, specifications, and supervisor direction. Supplying the warehouse and the manufacturing lines with finished, cleaned, and deburred parts. Duties/Responsibilities • Prepares work for processing by acquiring purchased parts, fabricated parts, and/or raw materials and visually inspecting the materials for defects., • Set up the brake by reading and interpreting part drawings. Following verbal, written, and electronic instructions; writing, downloading, and correcting programs; positioning stops and securing tooling, dies, guides, and stops as necessary., • Produces parts by position, material, and operating equipment, • Maintains Follett quality and production standards by observing machine operations, detecting malfunctions, adjusting settings, replacing dies, inspecting parts, and deburring parts as needed to accomplish job results, • Inspects products, evaluating finished pieces for compliance with quality standards and specifications, • Maintains the availability of fabricated parts by delivering and placing parts in designated storage areas., • Maintains schedule by assisting other operators and performing two-person jobs., • Maintains a safe and clean working environment by complying with procedures, rules, and regulations; and by notifying the supervisor of hazards., • Resolves problems by notifying the supervisor to obtain additional information or resources., • Documents actions by completing reports, such as production reports, as required by the supervisor., • Keeps equipment and tools operational by following the manufacturer’s instructions and notifying appropriate personnel of needed repairs., • Assists in training new employees by demonstrating proper techniques, giving verbal instructions, and answering questions., • Maintains workflow by accepting transfers to other jobs within the plant., • Maintains inventory levels using various inventory control systems, such as pull boards and min tags., • Performs routine preventive maintenance on the press brake., • Performs other related duties as assigned, including assisting in brake apart operation at the laser, assisting material handlers, and operating vibratory and deburring machines when requested., • Complete end-of-line transactions in the ERP system for manufacturing jobs., • Follows safety protocols and company policiesRequirements: Required Skills/Abilities • Strong problem-solving skills and the ability to work independently or as part of a team, • Ability to safely and effectively operate or learn to operate press brake controls., • Ability to follow instructions., • Ability to read, interpret, and follow product plans, • Basic computer and math skills Education and Experience • High school diploma or equivalent, • At least 2 years of experience in metal fabrication or related work preferred. Physical Requirements • Prolonged periods of standing and performing repetitive tasks., • Must be able to lift up to 50 pounds at a time., • Good manual dexterity and physical stamina., • Ability to use foot controls., • Must have excellent hand-eye coordination. Note: This job description is not intended to be all-inclusive. The employee may be required to perform other related duties as negotiated to meet the organization's ongoing needs. If you are a results-driven individual, we invite you to join the team. Apply now and be part of an innovative company. Follett Denver is an Equal Employment Opportunity (EOE/M/F/Vets/Disabled) employer and welcomes all qualified applicants.

Job Description Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Track Operator, you will be at the core of the day to day operations, leading and guiding our customers to a fun, safe karting experience. Is this you? Duties and Responsibilities: • Provide excellent customer service to all K1 Speed visitors, • Run races precisely, on time and safely, • Maintain track cleanliness at all times, • Minor lifting required, • Standing for long periods of time Job Requirements: • Must be at least 18 years of age, • Provide proof of identity and eligibility to work in the United States, • Must have reliable transportation, • Weekends are a must!

Job Description Haga clic aquí para ver Vacantes y Solicitar en Español Looking for an opportunity to make a lasting mark on future generations and the communities they call home? Search no further, HEI has been an unrivaled contracting leader for over 50 years, with operations in Arizona, Colorado, the Carolinas, and Texas. As a top heavy civil construction company, we are dedicated to transforming landscapes across these regions, and we want you to join our team. With a relentless focus on safety, people, quality, and production, we tackle diverse projects that range from roadways and bridges to water infrastructure and environmental restoration. Our team is comprised of highly skilled individuals, just like you, who are ready to put their best boot forward. Get ready to unearth your true potential and dig into the exciting world of HEI Civil! We are seeking a highly motivated and experienced Main Pipeline Excavator Operator to join our team. Responsibilities: Operate the equipment in adherence to safety policies, procedures, job site and/or traffic laws. Maintain 3 points of contact on all pieces of equipment at all times. Respond to signals and directions by other staff members and work in coordination with them. Perform daily walk around checks and properly complete daily checklist. Clean and maintain equipment. Perform routine inspection on assigned equipment and report any needed repair to the supervisor. Attend daily safety meetings with the crew. Report any safety violation to the Supervisor and/or Safety Department. Report any incident to the Supervisor or safety team. When not operating heavy equipment, must perform other duties as assigned by Foreman. Required Knowledge, Skills, and Abilities: Understanding of computerized controls and electronics. Excellent hand, eye, and foot coordination. Extensive understanding of construction pipeline installation. Ability to read and comprehend safety rules, plans, maintenance instructions, operating procedures, etc. Strong teamwork orientation Education and Experience: Education: N/a Experience: 3+ years’ operating a main line machine. Salary: $40.00 per hour and up; Based on Experience

Job Description Since 1955, Nicholson Construction Company has been setting the industry standard for performance and technical innovation in geotechnical construction. We have built our reputation by performing the highest quality work and providing the most innovative solutions on the widest range of demanding and high-profile projects. Nicholson is part of a global network of unparalleled geotechnical resources and expertise, specializing in deep foundations, earth retention, ground treatment and ground improvement. Summary: Day to day management of all onsite construction activities on a given project in accordance with the contract requirements and work plan. Essential Functions: • Ensures that all Nicholson and OSHA safety regulations are met and enforced, bottom line responsibility for safety on site., • Develops JSA’s, holds safety meetings and provides safety training as needed., • Implements the construction plan and follows the budget developed by the project team., • Hires, fires, and supervises local craft labor working as required., • Schedules and maintains owned and rental equipment., • Orders and schedules delivery of materials and consumables., • Ensures that all required quality control checks are performed (including inspections)., • Supervises and mentors the Field Engineer(s) on site., • Reviews and/or prepares all required on-site documentation., • Attends on site meetings and coordinates site activities with the client as required., • Ensures that the project is built to the shop drawings and specifications at the level of quality required and in accordance with the Nicholson Quality Control Manual., • Identifies and documents additional work falling outside contract requirements., • Prepares short term schedules and goals for the project. Education & Training: • High School Diploma or GED, • OSHA 30-hour Training Certification, • First Aid/CPR Training Experience: • Minimum of 5 years of construction experience, including time spent as operator, labor foreman, or field/project engineer., • Dam Experience, • Experience managing multiple subcontractors on larger projects., • Experience working with state department of transportation a plus., • Knowledge of the geotechnical techniques that Nicholson performs., • Proven ability to run a work crew. Knowledge and Abilities: • Computer literate (Word, Excel, Outlook, Heavy Job)., • Capable of reading and understanding drawings and specifications., • Capable of developing actions lists and bar chart schedules., • Working knowledge of applicable OSHA and Nicholson safety rules., • Basic mechanical and maintenance skills related to Nicholson equipment., • Knowledge of geotechnical techniques that Nicholson performs., • Capable of setting up and stressing anchors., • Capable of setting up and performing pile load tests., • Capable of performing all quality control checks., • Proven ability to run a work crew., • Knowledge of union agreements (if applicable). Physical Requirements: • Reaching high and low, stooping, and bending continually., • Lifting/carrying/moving up to 50 pounds continually., • Travel per the company travel policy, often overnight and away from home, • Able to concentrate at a high degree in a busy and noisy construction environment., • Able to work in all types of weather. Mental Requirements: • Converse effectively using both verbal and written communication., • Make decisions and assume accountability, • Concentrate on tasks, • Demonstrate ability to manage stress and emotions as related to the workplace, • Attention to detail, • Identify and resolve conflict, • Assess safety and risk, • Ability to learn quickly and take on new responsibility as needed. Benefits: • Medical, • Dental, • Vision, • Short Term Disability, • Long Term Disability, • Accidental Death and Dismemberment, • Life Insurance, • 401(k) matching, • Safe Harbor Retirement Plan, • Employee Assistance Program, • Paid Vacation, • Personal days, • Sick days Nicholson Construction participates in E-Verify Please be advised that all interested candidates are REQUIRED to attach a copy of your resume in order to be considered. In an effort to foster a diverse workforce Nicholson Construction encourages applications from minorities, veterans, women and individuals with disabilities. EOE AA M/F/Vet/Disability If you want to view the EEO is the Law poster, please choose your language: English – Spanish – Arabic - Chinese

Job Description Key Responsibilities • Maintain, repair, and install HVAC and refrigeration equipment, • Troubleshoot boilers, chillers, pumps, compressors, fans, cooling towers, and heat exchangers, • Perform preventative maintenance and seasonal startup/shutdown procedures, • Monitor equipment performance, temperatures, pressures, and amperage readings, • Maintain alignment of motors, pumps, compressors, and V-belt systems, • Clean condenser tubes, cooling towers, strainers, and related equipment, • Operate steam and hot water boilers and associated systems, • Read and interpret schematics, control diagrams, blueprints, and technical manuals, • Perform brazing, soldering, oxyacetylene work, and welding as needed, • Complete work orders and maintain maintenance records and reports, • Respond to emergency service calls and participate in on-call rotation, • Monitor and respond to building automation system alarms Why Candidates Are Interested in This Role • Stable long-term employment environment, • Diverse work across commercial HVAC and mechanical systems, • Independent role with minimal supervision, • On-call and overtime opportunities available, • Work with large-scale boilers, chillers, cooling towers, compressors, pumps, and control systems, • Exposure to advanced building automation systems, • Opportunity to troubleshoot and maintain complex facility infrastructure, • Strong team-oriented maintenance environment Position Overview Seeking an experienced HVAC Technician to install, maintain, troubleshoot, and repair commercial heating, cooling, refrigeration, and mechanical systems within a large facilities environment. This role supports preventative maintenance, emergency repairs, seasonal system changeovers, and daily mechanical operations. Required Qualifications • High school diploma or GED, • Journeyman-level HVAC experience with a minimum of 10 years in the field, • EPA Universal Refrigeration Certification, • Strong troubleshooting and diagnostics experience with commercial HVAC systems, • Knowledge of OSHA and EPA regulations and safety procedures, • Valid Colorado Driver’s License, • Ability to lift up to 100 lbs and pass pre-employment physical screening Preferred Qualifications • Stationary Engineer Certification, • Boiler Operator Class A or B License, • Steamfitter Journeyman License, • Heating and Ventilation Journeyman License, • Refrigeration Journeyman License, • Experience with building automation systems and controls Work Environment • Indoor and outdoor commercial facilities environment, • Exposure to heat, electrical hazards, mechanical equipment, noise, vibration, humidity, fumes, and varying weather conditions, • Work may include rooftops, mechanical rooms, confined spaces, elevated work areas, and emergency response situations, • Fast-paced environment with moderate to high stress levels and unexpected interruptions Physical Requirements • Frequent standing, walking, climbing, crouching, bending, reaching, and repetitive hand movement, • Ability to push, pull, carry, and lift up to 100 lbs, • Ability to work in noisy, hot, cold, and confined environments, • Must be able to wear OSHA-approved respirators, • Strong close vision, distance vision, peripheral vision, depth perception, and focus adjustment required

Job Description Crusoe is on a mission to accelerate the abundance of energy and intelligence. As the only vertically integrated AI infrastructure company built from the ground up, we own and operate each layer of the stack — from electrons to tokens — to power the world's most ambitious AI workloads. When you join Crusoe, you join a team that is building the future, faster. We're in the midst of the greatest industrial revolution of our time. The demand for AI compute is boundless, and power is a bottleneck. We're solving that — with an energy-first approach that makes AI infrastructure better for the world and faster for the people innovating with AI. We're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. If you want to do the most meaningful work of your career, help our customers and partners advance their AI strategies, and be part of a high-performing team that believes in each other, come build with us at Crusoe. About This Role: The Press Brake Operator uses a press brake to bend, shape, cut, and manipulate sheet metal and metal plates to manufacture tools, equipment, and other components. This role is crucial for producing high-quality metal parts that meet our production needs. The ideal candidate has the ability to safely operate or learn to operate press brake controls, follow instructions, and interpret product plans. This is a full-time position. Available Shifts: Night Shift: Mon – Thur, 4:00 PM – 2:30 AM What You’ll Be Working On: Press Brake Operation: Operates a press brake to manufacture tools, equipment, and other components from sheet metal or metal plates. Setup and Adjustment: Prepares, sets up, and adjusts the press brake as required by product plans and production schedules. Material Management: Ensures that there are sufficient raw materials available. Measures and aligns materials to be used. Quality Inspection: Inspects products, evaluating finished pieces for compliance with quality standards and specifications. Maintenance and Upkeep: Performs routine maintenance on the press brake. Maintains a clean work area. Other Duties: Performs other related duties as assigned. What You’ll Bring to the Team: Skills: Ability to safely and effectively operate or learn to operate press brake controls. Ability to follow instructions. Ability to read, interpret, and follow product plans. Basic computer and math skills. Physical Requirements: Requires the ability to stand, walk, stoop, & bend for 8 hours or more daily. Requires constant use of arms, hands, fingers, eyes, legs, and back. Drug/Alcohol Testing and Background Check: All job offers are contingent upon receiving a negative drug/alcohol test. Must be able to pass a background check. Random Drug Testing: This position is subject to random drug testing. Safety-Sensitive Designation: This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required. Company Values: Our Company values speak to you, resonate with you, make sense to you and how you desire to work. Soft Skills: Must be detail oriented. Must be a team player willing to take on additional roles as needed. Have a good attitude and willingness to learn. Bonus Points: Precision Measurement Skills: Proficiency with precision measuring tools (e.g., micrometers, calipers, gauges). Material Knowledge: Knowledge of different types of metals and their properties, as well as appropriate bending techniques for each. Experience with Lean Manufacturing Principles: Familiarity with Lean Manufacturing or 5S methodologies. Benefits: Competitive compensation Restricted Stock Units Paid time off & paid holidays Comprehensive health, dental & vision insurance Employer contributions to HSA account Paid parental leave Paid life insurance, short-term and long-term disability Professional development & tuition reimbursement Mental health & wellness support Commuter benefits (parking & transit) Cell phone stipend 401(k) Retirement plan with company match up to 4% of salary Volunteer time off Compensation: Compensation will be paid in the range of $18-$29/hr + Bonus. Restricted Stock Units are included in all offers. Pay to be determined by the applicant’s education, experience, knowledge, skills, and abilities, as well as internal pay and alignment with market data. (#INDMFG) Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job DescriptionDescription: The General Machine Operator will safely control various machines and equipment involved in production, primarily in Press and Bindery. This is a great opportunity to receive training with multiple production machines. The ideal candidate will be an energetic go-getter who excels in a fast-paced environment, and is seeking an opportunity to learn, develop, and advance within the company. On the job training for our operation will be provided. First or second shift position, seasonal overtime may be required. Essential Duties and Responsibilities • Operates production machinery in accordance with prints and specifications. Assigned machines may include the press, bindery, and mailing inserter machines, with other machines assigned dependent on experience General Duties • Reviews department schedule and production order details to determine job specifications including deadline for completion, • Sets up and operates equipment, • Loads and unloads material from machines, • Maintain a clean and safe workspace at all times, • Assist with other day-to-day operations of the machine, • Other duties as assignedRequirements:, • Must be a motivated self-starter and eager to learn, grow, and seek future promotion, • Must be organized, mechanically inclined, and be able to maintain attention to detail, • Must be able to follow instructions, be teachable, and able to multi-task, • Must be able to repeated life and re-stack up to 50 lbs through a work shift, • Prior experience using print production machines, preferred

Job Description Are you experienced in door shop production, door machining, or millwork manufacturing? Alliance Door Products is hiring a Door Machine Operator to support commercial and residential door production by accurately machining doors, reading work orders, and delivering consistent, high-quality workmanship. This role is a strong fit for someone with hands-on experience machining doors or frames, operating production equipment, and working in a fast-paced shop environment where precision matters. The position includes standard machining tasks such as boring, edge prep, and hinge dapping, as well as quality checks, basic troubleshooting, and cross-functional production support. Copy and paste the link below for an inside look at what it is like to be on the Alliance Door Products team! https://www.alliancedoorproducts.com/us/careers WAGE: $24.00-$27.00 per hour, depending on experience. HOURS: Full-time Monday-Friday - 7:00 AM- 3:30 PM What You’ll Do: • Perform door and frame machining functions, including boring, edge prep, hinge dapping, and related production tasks., • Read and follow commercial and residential work orders accurately., • Machine doors, frames, special orders, and pre-hung units to specification., • Use computer systems and machine programs to support production requirements., • Inspect machined products to ensure they meet company and customer quality standards., • Troubleshoot basic machine, fit, material, and measurement issues and communicate concerns quickly., • Complete assigned daily, weekly, and monthly preventive machine maintenance., • Support other machines or production areas as needed through overflow relief and cross-training. What We’re Looking For: • Door shop, door machining, machine operation, or related production experience preferred., • Experience with boring, edge prep, hinge dapping, or similar machining functions preferred., • Ability to read work orders, labels, measurements, and other production documents., • Basic to intermediate computer skills for machine operation and production workflows., • Strong math and measurement skills, including feet, inches, and fractions., • Experience using hand tools, production tools, and machine equipment safely and accurately., • Strong attention to detail, organization, communication, and quality. Physical Requirements: • Stand and move throughout the production area for 8–9 hours per day., • Lift up to 50 lbs regularly and up to 70 lbs occasionally., • Participate in team lifts up to 150 lbs and maneuver materials up to 150 lbs., • Climb, balance, stoop, kneel, crouch, crawl, and occasionally use a ladder as needed. Benefits: • Competitive Wages - DOE., • Medical/Dental/Vision insurance and Health Savings Accounts (HSA's) with employer contributions, • Retirement Plan, • Paid Holidays, • Paid Time Off, • Paid Bereavement Leave, • 401K POSITION CLOSING: 7/2/2026 Why Alliance Door Products: Alliance Door Products is a leader in door and millwork solutions, and this role supports the daily production flow that keeps quality products moving to customers. The team environment emphasizes safety, quality, continuous improvement, and dependable collaboration across the shop. We are an equal-opportunity employer and one of North America's leading distributors of high-quality door products. The great service and products we deliver are a result of the hard work and talent of our exceptional team. We work very hard to hire the best team members who share our core values in respect for all people, integrity in every situation, and quality in everything we do. A supportive team with diverse backgrounds and career experiences from all around the world strengthens who we are and provides many opportunities for continuous growth and development within our Company. This job is Safety Sensitive and, therefore, is contingent upon a pre-employment drug test, including marijuana. As a standard part of the employment application process, Alliance Door Products may request employment references.

Job Description Oven Operator(Food Manufacturing Plant) Join the Sweetest Team in Aurora! Production 1stShift - 3:00 AM-3:00PM Wage $17.60/HR Ready to take your career to the next level? With Dessert Holdings you will help create the desserts people love and celebrate with... Be a part of something sweet! Dessert Holdings is the leading premium dessert company in the world. We craft artisanal, scratch-made desserts at scale, combining culinary innovation with the finest real ingredients. With a rich heritage spanning seven distinctive brands, we bring unmatched expertise and tailored solutions to our Retail and Foodservice partners. Why You'll Love Working Here Work with purpose you help deliver the desserts people celebrate with. Supportive team environment where your contributions matter. Growth opportunities across multiple departments. Training provided including certifications! Whether you're building your career or looking for a fresh start, we'll help you grow. Dessert Holdings offers benefits such as a choice of comprehensive medical plans, dental and vision insurance, paid vacation and holidays, and retirement contribution to all eligible employees Opportunity OverviewAre you ready to elevate your career in manufacturing operations and be a part of creating the world's best desserts?Dessert Holdingspartners with some of North America's most iconic chains to bring people together to celebrate life's sweetest moments!We are currently looking for an Oven Operator to join our team based in Aurora, CO!The Oven Operator is responsible for running quality product by following procedures established by the company without deviation. Ensure that all products are produced safely, efficiently and meet all quality standards as set forth by the company. This position is also responsible for understanding related Quality Management Systems including SQF, HACCP, and GMP to ensure safety and quality of employees and products. The job duties include responsibility for assuring food safety and for food quality for Steven Charles products.What You'll Do Every Day • Contributes to the team effort by accomplishing related tasks and contributing to process and operations improvement., • Follow GMP's, safety and work instructions, • Advise Production Supervisor/Lead (Mixing and Packaging) or Q.A. inspector of any quality or other problems, which may affect the production, efficiency or consistency in product or performance., • Responsible for the cleanliness of the area. Housekeeping must be performed regularly during the shift., • Must understand the company's food allergen program., • Able to start up ovens and make the required adjustments to the flames, injector's head and speed to get the quality expected., • Able to do changeover with minimum amount of downtime., • Recognize when ovens are not working properly and notify Lead/Supervisor of any changes., • Ability to do a complete training for oven operators., • Maintain a 5% or less in waste., • Must be able to understand SPC ( Statistical Process Control ) and input data, • Must be able to tell good quality from poor quality, • Must be able to communicate with mixers, leads & quality of any issues, • Troubleshoot and immediately report product or machine failures, • Complying with and having thorough knowledge of all Steven Charles product quality standards, policies and procedures., • Contributing and encouraging contribution to the Steven Charles team effort., • Understands the management of Quality Systems and is familiar with SQF, HACCP, and GMP practices which help ensure the safety within the workplace and the production of a safe and quality product(s).What We're Looking For, • Minimum of 6 months -1 year of experience in a Food Manufacturing., • High school diploma or general education degree (GED); or six months to one year related experience and/or training; or equivalent combination of education and experience., • Ability to add, subtract, multiply, and divide in all units of measure., • Flexibility to work various hours and shiftsAbout Dessert Holdings Dessert Holdings is a collection of premium dessert companies and brands: The Original Cakerie, Lawler's Desserts, Atlanta Cheesecake Company, Steven Charles, Dianne's Fine Desserts, Kenny's Great Pies, and Willamette Valley Pie Company. Dessert Holdings is owned by Bain Capital, is headquartered in St. Paul, MN, employs more than 3,500 people across ten manufacturing facilities, and is continuing its journey of rapid growth. EEO StatementDessert Holdings and its related entities provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or any other characteristics protected by law.

Job Description Many employers offer jobs; at Boise Cascade, we offer career opportunities. We are one of the largest manufacturers of plywood and engineered wood products in North America and the only wholesale stocking distributor for building products that can service the entire United States. Our broad national footprint provides opportunities in many career fields including sales, technical design/drafting, engineering, maintenance, I/T, administrative, production, warehousing, distribution and CDL truck driving. We’re invested in cultivating a respectful workplace culture that attracts, connects, grows, and retains a talented workforce – one where everyone feels seen, heard, and valued. Our people-centered approach to associate experience and engagement is rooted in our Core Values. Boise Cascade has an exciting opening for a Material Handler [Forklift Operator], Please review the responsibilities and needed qualifications below and apply today! Responsibilities • Receive, select, and load materials, • Operate forklift safely and efficiently, • Verify accuracy of orders after packaging and loading, • Provide basic customer service to internal and external customers, • Work with other team members to fulfill orders and complete tasks daily, • Maintain clean working area, • Follow all safety procedures (OSHA compliance), • Perform daily safety checks on forklifts, • Perform additional duties as assigned Qualifications • Basic:, • High school diploma, GED, or 2+ years equivalent experience, • Able to understand and follow safety/work instructions, • Comfortable with physical work in all weather conditions, • Ability to use hand tools and chainsaw, • Preferred:, • Forklift experience (sit-down/counterbalance), • Familiarity with building materials, • Able to measure and calculate material lengths Work Environment • High traffic warehouse and yard, • Physically demanding; outdoors in all weather conditions Operador de Montacargas/Manipulador de Materiales Responsabilidades Clave • Recibir, seleccionar y cargar materiales, • Operar el montacargas de forma segura y eficiente, • Verificar la precisión de los pedidos después del empaquetado y la carga, • Brindar un servicio básico a clientes internos y externos, • Trabajar con otros miembros del equipo para completar los pedidos y las tareas diarias, • Mantener el área de trabajo limpia, • Seguir todos los procedimientos de seguridad (En cumplimiento con OSHA), • Realizar controles de seguridad diarios en los montacargas, • Realizar tareas adicionales según se asignen Requisitos • Básico:, • Diploma de bachillerato, GED o más de 2 años de experiencia equivalente, • Capacidad para comprender y seguir las instrucciones de seguridad/trabajo, • Capacidad para realizar trabajo físico en cualquier condición climática, • Preferible:, • Experiencia con montacargas (sentado/contrapesado), • Familiaridad con materiales de construcción, • Capacidad para medir y calcular la longitud de los materiales Entorno de Trabajo • Almacén y patio con alto tráfico, • Exigente físicamente; al aire libre en cualquier condición climática About Boise Cascade Boise Cascade has been in the business of manufacturing wood products and distributing building materials for over half a century. Today we're one of the largest manufacturers of plywood and engineered wood products in North America – and the only wholesale stocking distributor for building products that can service the entire United States. Because our business is built on relationships, our associates are critical to our success. And we're committed to investing in them. That's why we offer a comprehensive benefits package designed to have a positive impact on all areas of your life – from health and well-being, career, and community, to financial security and personal safety, with many benefits beginning on your first day of employment. We call it, Total Rewards. Here's a snapshot of what we offer: Our Benefits • Medical + Prescription Drug, • Dental + Vision, • Flexible Spending Accounts (Healthcare + Dependent Care), • 401(k) Retirement Savings with company contribution, • Paid Time Off (20 days per year), • Paid Holidays (10 per year), • Paid Parental Leave (6 weeks), • Life Insurance

Job Description Crusoe is on a mission to accelerate the abundance of energy and intelligence. As the only vertically integrated AI infrastructure company built from the ground up, we own and operate each layer of the stack — from electrons to tokens — to power the world's most ambitious AI workloads. When you join Crusoe, you join a team that is building the future, faster. We're in the midst of the greatest industrial revolution of our time. The demand for AI compute is boundless, and power is a bottleneck. We're solving that — with an energy-first approach that makes AI infrastructure better for the world and faster for the people innovating with AI. We're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. If you want to do the most meaningful work of your career, help our customers and partners advance their AI strategies, and be part of a high-performing team that believes in each other, come build with us at Crusoe. About This Role: Join Crusoe Energy as a Receiving Warehouse Specialist, a flexible and crucial role that ensures the seamless flow of materials and products throughout our manufacturing operations. You'll be responsible for the timely delivery of finished goods to customers, the efficient pickup of necessary production supplies, and providing hands-on support across our warehouse and inventory functions. The ideal candidate is a detail-oriented and proactive team player with a strong work ethic who is committed to maintaining an organized workspace and is ready to take on additional responsibilities as needed. This is a full-time position. What You'll Be Working On: Receiving and Inventory Management: Meticulously receive incoming materials into the ERP system and ensure they are delivered to the proper storage area. Supply Chain & Logistics: Collect necessary shop supplies and materials to maintain a continuous production flow. This may require driving to various locations. Warehouse Support: Assist with various tasks related to parts cage duties, including working alongside the receiver and inventory specialist to ensure smooth operations. This may involve driving a forklift, unloading trucks, organ1izing materials, and keeping the cage area clean. Facility Cleanliness and Safety: Conduct daily inspections of the barn and lot area to ensure cleanliness, accessibility, and to eliminate potential hazards. Production Floor Organization: Regularly scan the production floor for any items that can be relocated to the cage, North shop, or barn for proper storage, maintaining a clear and safe workspace. Cross-Functional Flexibility: Provide essential support for receiving and inventory tasks as needed, and assume responsibilities of the receiving, kitting, or inventory roles during periods of employee absence. What You'll Bring to the Team: Attention to Detail & Analytical Skills: Must be highly detail-oriented with a strong analytical ability and a willingness to accept and learn from feedback. Collaborative & Proactive Work Ethic: A team player who is willing to take on additional roles, has a good attitude, and a strong willingness to learn. Physical Capabilities: Ability to lift, lower, push, and pull merchandise up to 50 lbs. Requires the ability to stand, walk, stoop, and bend for 8 or more hours daily. Requires constant use of arms, hands, fingers, eyes, legs, and back. Compliance: Willingness to undergo a background check and a drug and alcohol test. Company Values Alignment: Consistently embody the company's core values in all professional interactions and work practices. Safety and Compliance: This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required. Must be able to pass a background check. Bonus Points: Certified Forklift Operator is a plus. Experience with Enterprise Resource Planning (ERP) or Warehouse Management Systems (WMS) is preferred. Benefits: Competitive compensation and equity packages Restricted Stock Units Paid time off, paid holidays & leave of absence programs Comprehensive health, dental & vision insurance Employer contributions to HSA account Paid parental leave Paid life insurance, short-term and long-term disability Professional development & tuition reimbursement Mental health & wellness support Commuter benefits (parking & transit) Cell phone stipend 401(k) Retirement plan with company match up to 4% of salary Volunteer time off Global travel insurance & emergency assistance Daily meals allowance Additional perks & programs specific to location Compensation Range Compensation will be paid in the range of up to $19 -$23 + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicant's knowledge, education, and abilities, as well as internal equity and alignment with market data. (#INDMFG) Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job DescriptionWarehouse & Logistics Technician – Drive Our Physical & Digital Flow Location: Littleton, CO | Pay Range: $19 – $25 / hour FT Build a Versatile Career with an Industry Leader Since 1983, Setpoint Systems Corporation has been a powerhouse in building automation. As we undergo a period of rapid growth and expansion, we are looking for a motivated, highly reliable individual to join our Supply Chain team. This isn't a typical "back-of-house" warehouse job. This is a unique, cross-functional role designed for a detail-oriented professional who wants to master both the physical movement of high-tech components and the administrative side of global procurement. If you are looking for a clear path toward career advancement and focused future development in logistics, purchasing, or supply chain management, this is your entry point. The Mission: Dual Impact Responsibilities 1. Warehouse Operations & Inventory (The Foundation) Receiving & Quality Control: Accurately receive and inspect incoming high-tech components, verifying them against purchase orders (POs) and packing slips. Kitting & Manufacturing Support: Execute precise material picking and staging for project kits and our Panel Fabrication shop, ensuring our field teams have exactly what they need to succeed. Logistics & Deliveries: Package and label outgoing shipments with professional care, coordinate with freight carriers, and handle direct material deliveries to local job sites to ensure uninterrupted project momentum. Inventory Integrity: Execute cycle counts and investigate discrepancies to maintain our elite 98% inventory accuracy target. Safety First: Safely operate material handling equipment (forklifts, pallet jacks) while maintaining an organized, compliant environment. 1. Procurement & Administrative Support (The Growth Path) PO Orchestration: Under the guidance of our Purchaser, you will track open orders, follow up on delivery dates, and confirm vendor acknowledgments to prevent project delays. Documentation & Vendor Liaison: Act as a critical bridge between Setpoint and our vendors to secure, review, and process all necessary documentation, efficiently resolving shipment issues, missing paperwork, or lead-time hurdles. Data Intelligence: Accurately update lead times, vendor info, and purchasing data within our ERP system. Strategic Admin: Support the processing of vendor quotes and invoices, maintaining the digital database that powers our purchasing strategy. Who You Are: The Proactive Professional We are looking for a "Right Fit" candidate who brings: Meticulous Accuracy: You understand that a single wrong part number can stop a multi-million dollar project. Accountability: You take personal ownership of inventory levels and vendor follow-ups. Adaptability: You are eager to learn the administrative side of the business and can pivot quickly from the warehouse floor to the computer desk. Grit: You are a hands-on worker who enjoys a fast-paced, physical environment. Required Qualifications Experience: 1–3 years in a distribution center, warehouse, or logistics environment. Education: High school diploma or GED required. Tech Savvy: Basic proficiency in Microsoft Office (Excel/Word); experience with an ERP or Inventory Management System is a major plus. Physical Strength: Ability to frequently lift and move material up to 50 pounds. Certification: Forklift operator certification preferred (or willingness to obtain it immediately). Why Join Setpoint Systems? Career Advancement: We are committed to internal mobility, offering clear and supported pathways for you to move into advanced procurement, supply chain, or operations management roles. Future Development: We invest heavily in our team's continuous education and skill expansion, ensuring your professional toolkit grows alongside our industry innovations. Direct Mentorship: Receive functional training from our veteran Purchaser and Warehouse Manager. Dynamic Culture: Join a fast-paced, growing company that rewards energy, loyalty, and precision. Ready to master the flow of materials and information? Apply today and help Setpoint Systems fuel the future of building automation! Powered by JazzHR RK2aYelRJh

Job DescriptionDescription:Meyer Distributing is looking for Warehouse Operators to join our Denver, CO team! The Warehouse Operator loads and unloads trucks, stocks products in appropriate locations, pulls stock and stages products for shipping, and operates powered industrial equipment (forklift/manlift), ensuring accuracy and timeliness of all job functions. Hourly Rate for Operator: • $20.00-$23.00 with opportunities for increases through performance reviews Schedule (End times may vary): 2nd Shift: Monday-Thursday: 11:00 AM - 8:00 PM (Rotating Fridays-Saturdays 1st Shift: Monday-Thursday: 6:00 AM - 3:00PM (Rotating Fridays-Saturdays Requirements for Warehouse Workers and Operators: • Ability to lift up to 75 pounds, • Ability to engage in repetitious bending and lifting, • Ability to operate equipment - forklift/manlift (cherry picker), • Must obtain forklift and manlift certification within 3 months, • Must be able to work up to 25 feet above ground level, • Must not be afraid of heights Benefits for Warehouse Operator: • Medical with HSA option, • Vision, • Dental, • Disability, • Life Insurance, • 401K with Company Match, • Early Pay Opportunities, • Paid Holidays, • Paid Vacation & Personal Time, • Employee Discount, • Steel-Toe Footwear Annual Allowance, • Other Meyer Perks: Tuition Reimbursement, cell phone discounts, rental car discounts, etc. Warehouse Worker and Operator duties include but are not limited to: • Unload trucks and distribute products to appropriate area of warehouse for restocking, • Use scanners to place parts in proper bins and pulls orders, • Stock parts on racks in proper location, • Fill orders from warehouse stock and distributes items to shipping or to designated route driver/customer pick-up staging area, • Place product on pallets and wraps it in film and bands it using banding equipment, • Assist in counting and reconciliation of physical inventory, • Keep warehouse and work area clean and organized at all times, • Wear protective toed shoes and work in a safe manner at all times, • Move products manually and with the assistance of a forklift and manlift, • Load trucks and secures product, • All other duties as assigned Meyer Distributing is a complete wholesale distributor: automotive, RV/towing, outdoor living, marine, and more. With 85+ locations across the country, Meyer services dealers nationwide. Meyer Logistics is a transportation company that serves as the backbone of Meyer Distributing’s shipping network. Meyer Logistics has a fleet of 500+ top-of-the-line trucks. Meyer Distributing & Logistics are driven to perform – come join our team today! "Military friendly" Requirements:

Job DescriptionTellworks Logistics, headquartered in Atlanta, Georgia with locations throughout the United States, is a leading provider of supply chain services. Our company offers warehouse and logistics services for companies who depend on service excellence and require a personalized, rather than one-size-fits-all, approach to their materials management requirements. Job Position: Warehouse Associate Brief Description We are looking for warehouse associates with forklift experience with high attention to detail to move packages and materials around our facilities. You will be operating a forklift with the utmost care to ensure efficiency and safety. Your job could involve driving around warehouses, storage spaces, and other facilities. You must be a responsible individual with great experience in driving industrial vehicles. Essential Functions The following is intended to describe the general nature and level of work being performed. It is NOT an exhaustive list of all expectations. The individual in this position must be capable of performing all the essential functions with or without a reasonable accommodation. • Load/Unload inbound and/or outbound freight from trailers/containers, • Locate and move stock of products to pallets or crates for storage or shipment, • Identify damages and report shortages or quality deficiencies, • Transport raw materials to production workstations, • Inspect machinery to determine the need for repairs and guarantee safety by performing regular maintenance, • Keep updated records of inventory and activity logs, • Comply with company policies and legal guidelines, • Help maintain a safe and orderly environment of the facilities Job Requirements • High School Diploma or Equivalent, • Prefer 2-4 years of experience, • Must be able to read, decode, and decipher freight coding, • Consistently lift, standing, bending, and rotating motions, • Operate hand truck and forklift, • Must be able to read and write English, • Basic Mathematics Skills, • Must be able to pass any federal/state/local government and company-required background checks, clearances, and/or drug and alcohol tests. Physical Demands This is intended as a description of the way the job is currently performed. It does not address the potential for accommodation. • Must be able to move about the warehouse to access products, and machinery and assist others, • Must be able to move and place cartons on pallets weighing up to 60 pounds, • Must be able to bend downward using legs at the knee, • Must be able to detect, determine, perceive, identify, recognize, judge, observe, inspect, estimate, and assess product, • Must be able to communicate, detect, converse with, discern, convey, express oneself, and exchange accurate information Skills • Basic mathematics skills (add, divide, multiply and subtract), • Ability to interpret instruction, • Basic computer skills, • Prefer forklift skills Non-Physical Demands • Must be reliable and dedicated to good attendance, • Must be available to occasionally work overtime, as required, • Must be adaptable to changing work tasks and workload, • Must be dedicated to working safely, • Must be dedicated to delivering outstanding customer service Job Type: Full-time Benefits: • Medical insurance, • Dental Insurance, • Vision insurance, • Paid Time Off, • 401k

Currently Hiring Company Truck Drivers (CDL-A Only).Apply today and within 24 hours you'll receive multiple job offers. Earn $.60 - $.80+ CPM! and up per year based on position. Simply select the driving job that offers you what is most important.Higher pay, increased benefits or more home-time: You choose.Avg. Company Driver Job Offers Salary: $85,000-$110,000+Avg. Owner Operator Job Offers Salary: $200,000-$325,000+ Apply now to receive your job offers!Pandologic. Category: , Keywords: Truck Driver

: \n At Curana Health, we're on a mission to radically improve the health, happiness, and dignity of older adults—and we're looking for passionate people to help us do it. \n \n As a national leader in value-based care, we offer senior living communities and skilled nursing facilities a wide range of solutions (including on-site primary care services, Accountable Care Organizations, and Medicare Advantage Special Needs Plans) proven to enhance health outcomes, streamline operations, and create new financial opportunities. \n \n Founded in 2021, we've grown quickly—now serving 200,000+ seniors in 1,500+ communities across 32 states. Our team includes more than 1,000 clinicians alongside care coordinators, analysts, operators, and professionals from all backgrounds, all working together to deliver high-quality, proactive solutions for senior living operators and those they care for. \n \n Ranked #147 on the Inc. 5000 list of America's fastest-growing private companies, we're just getting started. If you're looking to make a meaningful impact on the senior healthcare landscape, you're in the right place—and we look forward to working with you. \n \n For more information about our company, visit CuranaHealth.com. Summary: \n We are seeking a compassionate and skilled Nurse Practitioner or Physician Assistant to join our healthcare team, delivering high-quality primary care in senior living facilities. In this role, you will provide direct patient care, focusing on promoting wellness, managing chronic conditions, and coordinating care with other healthcare providers. This position offers a rewarding opportunity to improve the health and quality of life for seniors within assisted and independent living communities. Essential Duties & Responsibilities: \n\n • Patient Care and Assessment: Perform comprehensive assessments, develop treatment plans, and provide ongoing care management for residents, focusing on preventive care and chronic disease management.\n, • Routine Rounds and Monitoring: Conduct regular rounds to assess residents’ conditions, adjust treatment plans, and address any emergent health concerns.\n, • Care Coordination: Collaborate with facility staff, family members, and other healthcare providers to ensure comprehensive, coordinated care tailored to the residents' needs.\n, • Patient Education: Educate residents, families, and facility staff on disease prevention, wellness, and managing chronic illnesses to support better health outcomes.\n, • Documentation and Compliance: Maintain accurate, timely, and thorough documentation within the electronic medical record (EMR) system, ensuring compliance with regulatory standards and organizational protocols.\n, • Quality Assurance: Participate in quality improvement initiatives to enhance care delivery, reduce hospital readmissions, and optimize patient satisfaction within the facility.\nWhat We Offer\n We know that caring for seniors takes more than just medical expertise—it takes support, tools, and opportunities to grow. That’s why Curana offers: \n\n • \n Unlimited earning potential with competitive compensation models. \n • \n Autonomy of practice backed by strong clinical and administrative support. \n • \n Cutting-edge care model that empowers you to transform senior healthcare. \n • \n Data-driven tools & AI solutions to better understand and manage patient needs. \n • \n Streamlined communication with smart texting and modern tech platforms. \n • \n Professional development, including CME support \n • \n Quality incentives with bonuses tied to patient outcomes and care excellence. \n • \n Work-life balance supported by generous paid time off. \nBenefits\n\n • \n Medical, Dental, Vision insurance \n • \n 401(k) with company match \n • \n Company-paid short- and long-term disability \n • \n Comprehensive malpractice coverage \n • \n UpToDate subscription for clinical decision support \n\n Full-time employees are eligible for Curana Health’s full benefits package. Part-time employees may be eligible for limited benefits as applicable. Qualifications: \n \n\n • Valid nurse practitioner or physician assistant license in state of operations & current board certification in your field\n, • Masters Degree in Nursing or Physician Assistant Studies\n, • Strong leadership, interpersonal, and problem-solving skills preferred.\n, • Must possess excellent written and oral communication skills\n, • Must possess traits of punctuality, organizational skills, and ability to function within a team.\n\n \n This role requires travel to and from one or more assigned facilities. Depending on the amount of travel required, Curana may in future determine that a valid driver’s license, current auto insurance, and an acceptable driving record are required. If so, you will be provided with thirty (30) days notice of this requirement. From that time forward, please be advised that Periodic motor vehicle (MVR) checks may be conducted as a condition of, and/or for, continued employment. \n \n \n \n \n We’re thrilled to announce that Curana Health has been named the 147th fastest growing, privately owned company in the nation on Inc. magazine’s prestigious Inc. 5000 list. Curana also ranked 16th in the “Healthcare & Medical” industry category and 21st in Texas. \n \n This recognition underscores Curana Health’s impact in transforming senior housing by supporting operator stability and ensuring seniors receive the high-quality care they deserve. \n Pay Range: USD $110,000.00/Yr. - USD $120,000.00/Yr. Pay is based on several factors including but not limited to education, work experience, certifications, etc. In addition to your salary, Curana Health offers benefits such as, a comprehensive benefits package, 401K, PTO, paid holidays (all benefits are subject to eligibility requirements).

Job Description Olgoonik is an Equal Opportunity Employer Overview: The Fuels Distribution System Operator is responsible to Fuels Management Team (FMT) and the Project Manager for satisfactory accomplishment of all assigned tasks to include accountability, security, safety, and task performance within their designated area of responsibility. Will perform duties within Fuels Operations under the section lead’s direction to include issue, receive, store, account for quality check and dispense aviation fuel, deicing fluid, gasoline, compressed natural gas, heating oil, and diesel fuel using a variety of fixed facilities and mobile fuel handling equipment. Primary Responsibilities: • Perform duties within Fuels Operations to include issue, receive, store, account for, quality check, and dispense aviation fuel, de-icing fluid, gasoline, compressed natural gas, heating oil, and diesel fuel using a variety of fixed facilities and mobile fuel handling equipment., • Climb above ground fuel storage tanks, perform facilities and equipment inspections and perform minor maintenance tasks on facilities as well as maintenance as necessary on mobile equipment., • Maintain facilities, grounds and equipment within their scope of responsibility in a clean and neat manner including housekeeping, cleanliness, and general appearance., • Provide fuel support for the 24-hour, 7-day Columbus AFB, MS operations., • Accountable for meeting safety performance standards and completing all work safely., • Responsible for timely reporting of accidents, injuries and “near miss” and hazardous situations., • Must be able to perform all essential tasks as related to directives in Contractual Performance Work Statements., • Inspect, operate and maintain a complete fuels distribution system(s) to receive, store, transfer and issue both aviation and ground fuels., • Inspect systems for leakage, corrosion, faulty fittings, and inoperative components such as distribution lines, storage tanks, hydrant pits/outlets, oil/water separator, pumps, automatic/manual valves, meters, and system control rooms., • Maintain hazardous waste management program., • Initiates emergency procedures as necessary., • Perform preventive maintenance on components and tanks to include inspections., • Maintain inspection and maintenance records and perform quality control of cryogenic products., • Maintain constant surveillance over all fuels, equipment and systems to ensure no deviation from accepted quality assurance standards., • Other duties may be assigned from time to time, including changing tires, dispatching refueling units, and hose pulling. Supervisory Responsibilities: • N/A Education and/or Experience: • Two years’ experience working in a USAF Fuels specialty or civilian equivalent., • Fuels military equivalent certified qualifications. Knowledge, Skills, and Abilities: • Ability to obtain and maintain airfield Competency Card., • Ability to pass a color vision test., • Ability to work rotating shifts including nights and weekends., • Proficient with Microsoft Suite of products including Word, Excel, Access, and Outlook, • Demonstrate a good attitude and ability to work as a member of a team., • Position requires self-motivation and the ability to work effectively under a minimum of supervision., • Must be able to multi-task efficiently, work in a fast-paced environment on multiple projects, and have a strong attention for detail. Certificates, Licenses, Registrations: • Commercial Driver’s License Class A or B with hazardous material, tanker and air brake endorsements., • Work with the FMD program., • USAF fuels Quality Control Course is preferred. Security Clearance: National Agency Check with Inquiries (NACI) required: • Must have a current US Government NACI or be able to successfully complete a National Agency Check with Inquires., • Must be a U.S. Citizen., • Must also be able to maintain an NACI. Physical Demands: The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this position. The employee must be able to stand, walk and sit for a prolonged period of time; use hands and/or fingers to handle or feel objects, tools or controls; operate office equipment; reach with hands and arms; climb stairs; balance; stoop; kneel; talk and hear. Specific vision abilities required by the job include close and distant vision. The employee must occasionally lift and or move up to 50 pounds. Travel: Domestic travel may be required for training and program coordination. Work Environment: Work is regularly performed in outside weather conditions, including rain and extreme heat, near moving mechanical parts and includes occasional exposure to wet and/or humid conditions and to vibration. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law. Compensation details: 31.15 Hourly Wage PIeef33831c646-25405-40295946

Job Description ABOUT US: Be a part of the growing boutique fitness industry and join our Studio Team! Interact directly with members and prospective members and help them on their fitness journey while you connect and contribute to our studio community in this fun, high-energy and service-focused environment! Riser Fitness, established in 2013, is a multi-unit operator and developer of the Club Pilates franchise system. Riser Fitness is one of the largest and longest operating franchisees. POSITION: Position Title: Assistant General Manager Reports to: General Manager (occasionally District Manager) Position Type: Full Time REQUIREMENTS: • Confident in generating personal sales and training Sales Associates in transactions., • Ability to assist in driving revenue streams: memberships & retail sales, private training bookings, and teacher training enrollments., • Must be fluent in English and have excellent communication and strong interpersonal skills in person, on the telephone and via email., • Ability to excel in a fast changing, diverse environment., • Ability to recognize areas of improvement and make changes using good judgement., • An affinity and passion for fitness., • Solid writing and grammar skills., • Highly organized, proficient in data management, ability to prioritize and meet deadlines., • Professional, punctual, reliable, and neat., • Strong attention to detail and accuracy., • Trustworthy and ability to handle confidential information., • Ability to work harmoniously with co-workers, clients and the public., • Proficiency with computers and studio software. RESPONSIBILITIES: • Execute lead generation via Grass Roots Marketing and Networking., • Implement sales process to schedule prospects into introductory classes., • Drive & increase membership & retail sales through customer service., • Problem-solve staffing/scheduling issues with instructors and other personnel., • Ensure that studio retail/products are stocked with accurate inventory counts., • Train and support Sales Associates., • Independently make decisions related to high level customer service., • Collect outstanding dues., • Maintain cleanliness and organization of the Pilates Studio., • Enforce Club Pilates policies and procedures and lead by example., • Ensure all forms, administrative supplies, and studio literature are stocked and visible., • Schedule and participate in networking/community events and studio promotions., • Assist with marketing campaigns to generate leads for the studio., • Execute adherence to all company policies, including the policy of at-will employment., • Other duties as assigned. BENEFITS AND PERKS: • Hourly wage: $22/hr, • Additional commission on sales, • Average total earnings (with commission): $22-26/hr, • Health Benefits, • 401K, • Paid Time Off, • Unlimited growth potential within the company Powered by JazzHR gBpSlZSuHs

Job Description General Manager – Aqua-Tots Swim School (Swim School Manager | Operations Manager) Location: Denver, CO Job Type: Full-Time Pay Range: $50,000-$60,000 Schedule: Flexible availability required, including afternoons/evenings and weekends to meet the needs of the school and season. Benefits: • Health Insurance w/ HSA & FSA options, • Employer-paid dental and vision, • 401(k) with company match, • Paid Time Off (PTO), • Parental Leave, • Employee discount on lessons This role leads team development, customer experience, sales growth, and daily swim school operations to ensure families receive world-class swim lessons in a safe and welcoming environment. Welcome to Aqua-Tots! At Aqua-Tots, we are saving lives by teaching children how to become safe and confident swimmers for life. Are you looking for a company that invests in its leaders and promotes growth from within? Do you thrive in a mission-driven culture where your work makes a difference every day? If so, you may be exactly who we’re looking for. The right leader will be welcoming, enthusiastic, and embody our Core Behaviors: Be Friendly and Caring, Be Driven and Focused, Be Humble and Genuine, and Be Willing and Bold. What You’ll Do Lead the Team – Recruit, coach, and inspire staff to deliver consistent, high-quality lessons in a safe, fun, and welcoming environment. Create Excellent Family Experiences – Ensure strong customer service, smooth scheduling, and solutions to any issues. Drive Sales & Growth – Manage sales goals, track leads, and engage families to grow the school. Maintain Facility Standards – Ensure the pool, lobby, and facility meet Aqua-Tots brand standards for cleanliness, safety, and overall appearance. Oversee Operations – Handle staffing, scheduling, payroll, and budgets while keeping operations running smoothly. Partner for Success – Collaborate with the Regional Manager and Operations Team to ensure excellence across all areas of the school. What We’re Looking For 2+ years of management experience (operations, hospitality, education, or retail preferred) Strong customer service and people leadership skills Someone who thrives on building teams, solving problems, and creating positive experiences Flexible availability to meet the needs of the school High School diploma or GED required; Bachelor’s degree preferred CPR certified & Certified Pool Operator (CPO) license (or willing to obtain — we’ll provide training) Ready to Dive In? If you're ready to lead with purpose, inspire a team, and make a lasting impact on families in your community, apply today to become a General Manager at Aqua-Tots Swim Schools! Legacy Swim School proudly operates 44 Aqua-Tots locations across multiple states, creating opportunities for leaders to grow their careers within our expanding organization. Powered by JazzHR EZisC6UhOS

Job Description Assistant General Manager – Aqua-Tots Swim School (Swim School Manager | Operations Manager) Location: Denver, CO Job Type: Full-Time Pay Range: $40,000-$48,000 Schedule: Flexible availability required, including afternoons/evenings and weekends to meet the needs of the school and season. Benefits: • Health Insurance w/ HSA & FSA options, • Employer-paid dental and vision, • 401(k) with company match, • Paid Time Off (PTO), • Parental Leave, • Employee discount on lessons This role leads team development, customer experience, sales growth, and daily swim school operations to ensure families receive world-class swim lessons in a safe and welcoming environment. Welcome to Aqua-Tots! At Aqua-Tots, we are saving lives by teaching children how to become safe and confident swimmers for life. Are you looking for a company that invests in its leaders and promotes growth from within? Do you thrive in a mission-driven culture where your work makes a difference every day? If so, you may be exactly who we’re looking for. The right leader will be welcoming, enthusiastic, and embody our Core Behaviors: Be Friendly and Caring, Be Driven and Focused, Be Humble and Genuine, and Be Willing and Bold. What You’ll Do Support School Operations – Partner with the General Manager to help oversee daily school operations, maintain facility and brand standards, and ensure the pool, deck, and front office operate smoothly. Lead Front Desk & Aquatics Teams – Provide leadership and support to Front Desk teammates and Aquatic leadership to ensure consistent service, communication, and team accountability. Drive Customer Experience & Sales – Help maintain high customer engagement by educating families on the Aqua-Tots Learn to Swim program, supporting enrollment conversations, and ensuring a positive experience for every family. Manage Scheduling & Coverage – Support team scheduling and daily coverage to ensure proper staffing for swim lessons and front office operations. Coach & Develop Teammates – Assist with hiring, training, mentoring, and evaluating teammates while helping maintain a positive, high-performing team culture. Monitor Quality & Consistency – Ensure swim lessons, customer interactions, and facility standards consistently reflect the Aqua-Tots brand and experience. Support School Performance – Assist the General Manager in tracking sales performance, monitoring customer feedback, and supporting operational initiatives that help the school grow. What We’re Looking For 1+ years of management experience (operations, hospitality, education, or retail preferred) Strong customer service and people leadership skills Someone who thrives on building teams, solving problems, and creating positive experiences Flexible availability to meet the needs of the school High School diploma or GED required; Bachelor’s degree preferred CPR certified & Certified Pool Operator (CPO) license (or willing to obtain — we’ll provide training) Ready to Dive In? If you're ready to lead with purpose, inspire a team, and make a lasting impact on families in your community, apply today to become a General Manager at Aqua-Tots Swim Schools! Legacy Swim School proudly operates 44 Aqua-Tots locations across multiple states, creating opportunities for leaders to grow their careers within our expanding organization. Powered by JazzHR l0hPHlqEq8

Job Description A leading hospitality group is seeking an executive chef to drive excellence in kitchen operations and culinary standards. This is an exciting opportunity to lead a talented team, shape menu offerings, and make a significant impact within an established and supportive company culture. Executive Chef Benefits & Compensation • Competitive base salary with performance-related incentives, • Paid time off and holiday benefits, • Opportunities for professional growth and continued development, • Supportive, team-oriented work environment Executive Chef Requirements & Qualifications • Minimum 3 years of experience in food service management or assistant management roles, • Proven leadership and team development skills, • Physical ability to stand for up to 5 hours and lift up to 50 pounds, • Willingness to work 50–60 hours per week Executive Chef Preferred Background & Skills • Seafood experience is highly valued, • Experience training sous chefs and kitchen managers, • Strong financial acumen with experience in kitchen budgeting and cost control Executive Chef Day-to-Day Responsibilities • Oversee food production quality and ensure operational standards are consistently met, • Train, coach, and review the performance of sous chefs and the kitchen team, • Analyze financial reports and adjust operations to meet profitability goals, • Conduct regular meetings with kitchen management to drive engagement and efficiency, • Ensure compliance with all labor, health, and safety regulations, • Manage kitchen shifts and maintain high standards of service and cleanliness If you are a strong operator, a proven leader, and ready to play a key role in a culture-driven culinary team, we encourage you to apply.

Position Description Ryder is hiring a Class A CDL Truck Driver in Aurora, CO — offering weekly pay, excellent benefits, and a driving career you can feel good about. See and Hear from a Ryder Employee who Drives for Us Here: https://RyderCareers.Video/HomeDailyPosition You might be wondering what your paycheck will look like. $1531 or more per week - And it gets better • Driver Positions Pay Weekly, • Hourly Pay: $31.40 Per Hour, • Hours Per Week: 40 - 50 hours per week, • Per Diem Pay: $40.00 per night with 1 - 2 nights per Week, • Paid Training, • Schedule: Monday - Friday, • Working 4 - 10 hour days - 1 day off within the week, • Start Time: 5:00 AM, • Route Delivery Experience Required Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Irma or text “Aurora” to904-541-9066to speak with your recruiter today. We know choosing a driving career is a big decision. That’s why we’re upfront about pay, routes, and schedules — so you can feel confident joining the Ryder team. • Deliver SOLO To: CO, • Route: Regional, • Tractor Type: Straight Truck & Pup Trailers, • Trailer Type: Straight Truck 26' & Pup Trailers 28', • Equipment: Hand Truck and Liftgate, • Ryder will Train you on all equipment needed to be successful, • Freight: Heavy Touch - Pet Food, • Snow driving experience required, • Beverage delivery experience (soft drink, beer, or similar high‑volume route delivery), • Familiarity with fast‑paced routes, multiple stops, and touch freight environments Trucks are 36 months or newer, include 24/7 Roadside Maintenance and Company Drivers fuel up the trucks at over 800 Maintenance Facilities Nationwide. We have all the benefits other carriers do without the wait: • Medical, Dental & Vision after 30 days, • 80 hours PTO your first year, starting Day 1(use it or get paid for it), • Uniforms, cell phone & boot allowance provided, • Drivers are the Captain — you make safety decisions, and your job is protected, • 401(k) rollover available now + company match at 1 year, • 12 weeks paid maternity leave(subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click here to see all Ryder Driving Opportunities:https://ryder-drivers.jobs/ We will buy your truck if you’re looking to switch from Owner Operator to a Company Employee Driver, we will help make the switch even easier. We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday Let Ryder pay you more and Refer a Driver. We pay Unlimited Bonuses for Hired Drivers. EEO/AA/Female/Minority/Disabled/Veteran Our Culture & Commitment: At Ryder, you’re trusted to make an impact—while enjoying room to grow and having a voice that’s heard. Our culture is built on respect, collaboration, and shared pride in doing great work rooted in innovation and safety. Your Voice. Your Success. The Future We Build Together. Requirements • Minimum 21 years of age, • Pass a Ryder Drug Test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years, • Pass a DOT physical, • Pass a Ryder road test, • Provide appropriate CDL and endorsements for the position, • Must have Class A verifiable experience in a tractor trailer or comparable vehicle:, • 9 months experience within the past 3 years, OR, • 2 years’ experience within the last 5 years, OR, • 5 years’ experience within the last 10 years, • Ability to follow written and/or oral instructions, • Ability to read, interpret and apply laws, rules, regulations policies and/or procedures Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Ensuring compliance with applicable federal and/or state laws, regulations, and/or agency rules, standards and guidelines, • Detecting and eliminating or minimizing safety hazards Maintaining accurate records and logs, • Loading/Unloading freight or assisting in the loading/unloading of freight if required by customer, • Performs other duties as assigned Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 2 weeks ago (6/10/2026 10:14 AM) Requisition ID 2026-203727 Primary State/Province CO Primary City AURORA Location (Posting Location) : Postal Code 80011 Category Drivers Regional/OTR Solo Employment Type Regular-Full time Travel Requirements Driver Position Code 1000599

Position Description Ryder is hiring a Class A CDL Truck Driver in Danville, VA — offering weekly pay, excellent benefits, and a driving career you can feel good about. See and Hear from a Ryder Employee who Drives for Us Here: https://RyderCareers.Video/Freedom You might be wondering what your paycheck will look like. $2000 - $2200 per week - And it gets better • Ryder Drivers are Paid Weekly, • Team Miles Pay: $0.69 split per Mile with 6000 Miles per Week, • Team Stops Pay: $15.00 split per Stop with 4 Stops per Week, • Drop and Hook Pay: $10.00 split per Drop/Hook, • Sign-on Bonus pays you $1250 at 30 days and $1250 at 90 days, • Loyalty pays you $1250 at 6 months and $1250 at 1 year, • Paid Training, • Schedule: Leave out Sunday/Monday return Friday/Saturday, • Start Time: Varies Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Choosing a driving career is a big decision. Respect for your talent and experience while being upfront about pay, routes, and schedules are priorities at Ryder. • Deliver As A TEAM To: CO, CA, UT, and Central US, • Route: Regional, • Tractor Type: Sleeper, • Trailer Type: Dry Van 48', 53’, • Freight: No Touch – Packing Supplies Ryder Drivers operate well-maintained, safe trucks, 36 months or newer with 24/7 Roadside Maintenance and fueling at over 800 nationwide maintenance locations All the benefits you expect — without the wait. • Medical, Dental & Vision after 30 days, • 80 hours PTO your first year, starting Day 1(use it or get paid for it), • Uniforms, cell phone & boot allowance provided, • Drivers are the Captain — you make safety decisions, and your job is protected, • 401(k) rollover available now + company match at 1 year, • 12 weeks paid maternity leave(subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click here to see all Ryder Driving Opportunities:https://ryder-drivers.jobs/ Autonomy on the road – Support behind the scenes. When becoming a Company Driver, Ryder purchases owner operator trucks while providing support during the transition, and throughout your career. Join a team that listens, backs you up and helps you grow. Ryder is a community of proud women and men in logistics, including many Military Reservists and Veterans. Your contributions are recognized, valued, and appreciated. Let’s build futures together. Refer and get rewarded with unlimited bonuses up to $1,500 for every hired Driver. EEO/AA/Female/Minority/Disabled/Veteran Requirements • Minimum 21 years of age, • Pass a Ryder Drug Test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years, • Pass a DOT physical, • Pass a Ryder road test, • Provide appropriate CDL and endorsements for the position, • Must have Class A verifiable experience in a tractor trailer or comparable vehicle:, • 9 months experience within the past 3 years, OR, • 2 years’ experience within the last 5 years, OR, • 5 years’ experience within the last 10 years, • Ability to follow written and/or oral instructions, • Ability to read, interpret and apply laws, rules, regulations policies and/or procedures Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Ensuring compliance with applicable federal and/or state laws, regulations, and/or agency rules, standards and guidelines, • Detecting and eliminating or minimizing safety hazards Maintaining accurate records and logs, • Loading/Unloading freight or assisting in the loading/unloading of freight if required by customer, • Performs other duties as assigned Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 5 hours ago (7/2/2026 3:16 PM) Requisition ID 2026-205229 Primary State/Province CO Primary City DENVER Location (Posting Location) : Postal Code 80201 Category Drivers Team Employment Type Regular-Full time Travel Requirements Driver Position Code 1000996

Position Description Ryder is hiring a Class B CDL Truck Driver in Aurora, CO — offering weekly pay, excellent benefits, and a driving career you can feel good about. See and Hear from a Ryder Employee who Drives for Us Here: https://youtu.be/6_EEB85soUg • Driver Positions Pay Weekly, • Hourly Pay: $26.00 per hour, • Hours Per Week: 50+ Hours Per Week, • Paid Training, • Schedule: Monday - Friday, • Start Time: Early AM dispatch Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Sam or text “Aurora” to 904-541-9563 to speak with your recruiter today. Choosing a driving career is a big decision. Respect for your talent and experience while being upfront about pay, routes, and schedules are priorities at Ryder. • Run in: Surrounding Areas, • Route: Home Daily & Regional, • Tractor Type: Straight Truck, • Equipment: Pallet Jack, Stair Walkers, Forklifts, • Freight: Touch - Medical Supplies, • Heavy Touch Required, • TWIC cardpreferred, butnotrequired– we will reimburse. Ryder Drivers operate well-maintained, safe trucks, 36 months or newer with 24/7 Roadside Maintenance and fueling at over 800 nationwide maintenance locations All the benefits you expect — without the wait. • Uniforms & boot allowance provided, • Drivers are the Captain — you make safety decisions, and your job is protected, • 401(k) rollover available now + company match at 1 year, • 12 weeks paid maternity leave(subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click here to see all Ryder Driving Opportunities:https://ryder-drivers.jobs/ Autonomy on the road – Support behind the scenes. When becoming a Company Driver, Ryder purchases owner operator trucks while providing support during the transition, and throughout your career. Join a team that listens, backs you up and helps you grow. Ryder is a community of proud women and men in logistics, including many Military Reservists and Veterans. Your contributions are recognized, valued, and appreciated. Let’s build futures together. Refer and get rewarded with unlimited bonuses up to $1,500 for every hired Driver. EEO/AA/Female/Minority/Disabled/Veteran Requirements • Minimum 21 years of age, • Pass a Ryder Drug Test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years, • Pass a DOT physical, • Pass a Ryder road test, • Provide appropriate CDL and endorsements for the position, • Must have Class A or Class B verifiable experience in a tractor trailer or comparable vehicle:, • 9 months experience within the past 3 years, OR, • 2 years’ experience within the last 5 years, OR, • 5 years’ experience within the last 10 years, • Ability to follow written and/or oral instructions, • Ability to read, interpret and apply laws, rules, regulations policies and/or procedures Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Ensuring compliance with applicable federal and/or state laws, regulations, and/or agency rules, standards and guidelines, • Detecting and eliminating or minimizing safety hazards Maintaining accurate records and logs, • Loading/Unloading freight or assisting in the loading/unloading of freight if required by customer, • Performs other duties as assigned Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 9 hours ago (7/8/2026 10:49 AM) Requisition ID 2026-205523 Primary State/Province CO Primary City AURORA Location (Posting Location) : Postal Code 80011 Category Drivers Regional/OTR Solo Employment Type Regular-Full time Travel Requirements Driver Position Code 1001006