Trabajos operator en Tampa, FloridaCrear alertas

ABOUT Special Warfare Combatant-Craft Crewmen (SWCC) are specially trained to operate on and around rivers and coastal regions around the world. Wielding extreme firepower and a deadly skill set, SWCC operators support special warfare/special operations missions, as well as conduct direct action and special reconnaissance missions of their own. As a SWCC, you may very likely: - Insert and extract SEALs and other Special Operations personnel from a variety of Naval Surface Warfare vessels - Collect important data about enemy military installations and shipping traffic in coastal areas - Assist other military and civilian law enforcement agencies RESPONSIBILITIES As a SWCC, you will be called upon by your fellow Special Operations counterparts for support anywhere, anytime. You will typically: - Operate independently among small units or integrate with other U.S. Special Operations forces or within U.S. Navy carrier and expeditionary strike groups to accomplish operational tasks - Operate and maintain ordnance systems, communications, electronics, small boats, and other equipment associated with SWCC and other special operations missions - Perform direct action raids against enemy shipping and waterborne traffic - Provide rapid mobility in shallow water areas where larger ships cannot operate WORK ENVIRONMENT SWCC operators may be deployed anywhere in the world and operate day or night in cold weather, desert, tropical, or jungle environments. TRAINING & ADVANCEMENT As a SWCC, you will undergo some of the most intense and demanding physical and mental training in the world. While qualifying for SWCC in the Delayed Entry Program is preferred, you may also volunteer any time during your enlistment after completing boot camp and prior to your 31st birthday. While at RTC, you will take part in a rigorous physical examination and medical screening. Upon review of your entrance medical examinations, further physical screening tests will be given at RTC and at the Naval Special Warfare Center (SWCC School). Promotion opportunities are regularly available but competitive and based on performance. It's also important to note that specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields. EDUCATION OPPORTUNITIES Members of the Naval Special Warfare/Naval Special Operations (NSW/NSO) community have any number of unique opportunities to advance their education. Navy training provides everything from the fundamentals of explosive ordnance disposal to knowledge of chemical and biological warfare, military tactics, deep-sea diving, or a number of other tactical military procedures. Beyond offering access to professional credentials and certifications, Navy training in the NSW/NSO community can translate to credit hours toward a bachelor's or associate degree through the American Council on Education. You may also continue your education through opportunities like the following: - Navy College Program and Tuition Assistance - Post-9/11 GI Bill QUALIFICATIONS & REQUIREMENTS No college degree is required to become an Enlisted Navy SWCC operator, but the standards of qualification require the kind of mental and physical fortitude that few possess. For those making the cut, immense challenges and constant training are a way of life. To qualify for SWCC training, you must: - Meet specific eyesight requirements: 20/40 best eye; 20/70 worst eye; correctable to 20/25 with no color blindness - Meet the minimum Armed Services Vocational Aptitude Battery (ASVAB) score: ARVE=103, MC=51 - Be 30 years of age or younger - Be a U.S. citizen and eligible for security clearance Visit the Navy SWCC PST Calculator to review the current minimum Navy Physical Screening Test (PST) requirements for Navy Challenge Programs. General qualifications may vary depending upon whether you're currently serving, whether you've served before, or whether you've never served before.5c143e31-5e48-4549-b638-05792d185386

Chromalloy is a global engineering & solutions company. We are a leading provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines. We develop, manufacture and repair critical turbine components for a range of engine platforms. Our solutions support the engines running the aerospace, energy and defense industries around the world. Video: What We Do Why work at Chromalloy? Chromalloy employees are proud, passionate problem-solvers who strive to live our values every day. A career with Chromalloy is an opportunity to learn from top industry experts, work with important technologies, and unlock a passion for innovation. Join our team of experts, innovators and problem-solvers delivering world-class solutions for our customers. As a global company, we are committed to creating an inclusive environment where all employees feel represented, heard, and able to bring their best selves to work every day. Be part of something bigger with Chromalloy! Our Total Rewards Program is designed to support you today and in the future. \n • Comprehensive and flexible benefit options starting on day one, including medical, dental, vision, EAP, wellness incentives, and 401(k) with employer matching.\n, • Development & progression opportunities for every employee - regular performance conversations, training and development curriculum, and engineering fellowship programs.\n, • Paid time off, including vacation, sick time, paid holidays, and parental leave-all eligible on your first day of employment!\n SUMMARY Follows engineering specifications, standard work and customer requirements to cleans and prepare wax parts prior to assembly, assemble wax patterns, gating, sprues, and other components of a wax mold or cluster. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Performs all essential duties of the wax patterns prep/core prep operation as required or as requested by supervisor. \n, • Uses correct tools and supplies to remove defects from patterns, preparing them for the assembly operation \n, • Has the correct practice pulled up on the Mercury screen while performing the operation.\n, • Inspects wax patterns to ensure that they have been properly cleaned and are ready for assembly.\n\n, • Checks sketches and instructions in engineering practices to determine procedure required in the set up and assembly of wax patterns, into molds or clusters. \n, • Utilizes hot iron, water welders, scalpels and other tools as needed in the assembly process.\n\n, • Assembles wax, plastic and ceramic core components, assembles wax mold attaching patterns, gating, sprues, bleeders, pour cup, chem slug and other components of wax mold as shown in engineering practice. \n, • Uses stick-tight and other adhesive substances as required when attaching parts together during assembly process.\n, • Repairs imperfections as advised by supervisor, team leader or wax inspector, completes all necessary paperwork to include signing off the part router, transfers completed patterns to the next operation according to the router\n QUALIFICATIONS: The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • High school education or equivalent life experience and one or more years related experience or training in similar field or work requiring similar skills.\n, • Ability to read and understand documents, such as safety rules, work instructions and procedure manuals. Ability to record information daily. Ability to speak and listen effectively to follow instructions Ability to write, speak and understand verbal and written instructions.\n, • Ability to add and subtract two- and three-digit numbers to perform simple multiplication and division.\n, • Ability to apply commonsense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.\n PHYSICAL DEMANDS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. \n • While performing the duties of this job, the employee is regularly required to stand, sit; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms. \n, • The employee is regularly required to walk. \n, • The employee must regularly lift and/or move up to 20 pounds and occasionally lift and/or move up to 40 pounds. \n, • Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus.\n\n WORK ENVIRONMENT • While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is quiet to moderate.\n Due to government regulation only US persons (U.S. citizen, U.S. naturalized citizen, U.S. permanent resident, holder of U.S. approved political asylee or refugee status) may be considered for this role. Chromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations. Chromalloy is an equal opportunity employer - vets/disabled. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please contact:

Chromalloy is a global engineering & solutions company. We are a leadings provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines. We develop, manufacture and repair critical turbine components for a range of engine platforms. Our solutions support the engines running the aerospace, energy and defense industries around the world. Video: What We Do Why work at Chromalloy? Chromalloy employees are proud, passionate problem-solvers who strive to live our values every day. A career with Chromalloy is an opportunity to learn from top industry experts, work with important technologies, and unlock a passion for innovation. Join our team of experts, innovators and problem-solvers delivering world-class solutions for our customers. As a global company, we are committed to creating an inclusive environment where all employees feel represented, heard, and able to bring their best selves to work every day. Be part of something bigger with Chromalloy! Our Total Rewards Program is designed to support you today and in the future. \n • Comprehensive and flexible benefit options starting on day one, including medical, dental, vision, EAP, wellness incentives, and 401(k) with employer matching.\n, • Development & progression opportunities for every employee - regular performance conversations, training and development curriculum, and engineering fellowship programs.\n, • Paid time off, including vacation, sick time, paid holidays, floating holidays, and parental leave-all eligible on your first day of employment!\n \n • All core finishing operations (Die Line, Tie Bar, and Flash Removal, Repairs)\n, • Core Prep operations for Wax Injection\n, • Finishing Ceramic core parts\n, • Quality Visual Inspection of product for defects\n\n QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. \n • Candidate must adhere to all process documentation.\n, • Detailed Oriented\n, • Experience in a high paced environment.\n, • Experience working within manufacturing.\n, • Able to operate machinery and tooling safely and efficiently.\n, • Strong mechanical aptitude\n, • Open-minded, willing to learn.\n, • Strong team player\n, • Excellent interpersonal skills\n, • Strong verbal and written communication skills\n, • Must comply with internal Safety and 6S Standards.\n\n EDUCATION and/or EXPERIENCE High school education or equivalent life experience and three to six months related experience or training. Ability to learn and to operate all injection machines, and perform all functions of wax injection operation to include placement of patterns in wax setters or fixtures after injection. LANGUAGE SKILLS Ability to read and interpret documents, such as safety rules and work instructions and procedure manuals. Ability to record information on a daily basis. Ability to speak and listen effectively to follow instructions in English. Ability to write and speak complete sentences and understand verbal and written instructions in English. MATHEMATICAL SKILLS Ability to add and subtract two and three digit numbers and to perform simple multiplication and division. REASONING ABILITY Ability to apply commonsense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, climb or balance and stoop, kneel, crouch, or crawl; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms. The employee must regularly lift, push, pull and/or move up to 25 pounds, occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, ability to distinguish between colors, depth perception, and the ability to adjust focus to recognize defects in patterns WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Due to government regulation only US persons (U.S. citizen, U.S. naturalized citizen, U.S. permanent resident, holder of U.S. approved political asylee or refugee status) may be considered for this role. Chromalloy is an equal opportunity employer - vets/disabled. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please contact:

Chromalloy is a global engineering & solutions company. We are a leading provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines. We develop, manufacture and repair critical turbine components for a range of engine platforms. Our solutions support the engines running the aerospace, energy and defense industries around the world. Video: What We Do Why work at Chromalloy? Chromalloy employees are proud, passionate problem-solvers who strive to live our values every day. A career with Chromalloy is an opportunity to learn from top industry experts, work with important technologies, and unlock a passion for innovation. Join our team of experts, innovators and problem-solvers delivering world-class solutions for our customers. As a global company, we are committed to creating an inclusive environment where all employees feel represented, heard, and able to bring their best selves to work every day. Be part of something bigger with Chromalloy! Our Total Rewards Program is designed to support you today and in the future. \n • Comprehensive and flexible benefit options starting on day one, including medical, dental, vision, EAP, wellness incentives, and 401(k) with employer matching.\n, • Development & progression opportunities for every employee - regular performance conversations, training and development curriculum, and engineering fellowship programs.\n, • Paid time off, including vacation, sick time, paid holidays, and parental leave-all eligible on your first day of employment!\n SUMMARY A Ceramic Core Finisher is responsible for the precise finishing, inspection, and preparation of ceramic cores used in investment casting processes. This role ensures that each core meets strict dimensional, surface, and quality standards before being delivered for casting. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. \n • Carefully file, smooth, and shape ceramic cores using hand tools, , and precision instruments.\n, • Inspect cores for cracks, chips, or dimensional defects, ensuring compliance with engineering specifications.\n, • Perform minor repairs (patch) or touch-ups to maintain product integrity.\n, • Maintain a clean, safe, and organized work area while following all safety protocols.\n, • Document work that has been performed and report any quality issues to supervisors and team leads.\n\n Minimum Skills \n • Understanding written sentences and paragraphs in work-related documents.\n, • Communicating effectively in Speaking and writing.\n, • Give full attention to what other people are saying, take time to understand the points being made, ask questions as appropriate, and do not interrupt at inappropriate times.\n, • Monitor/Assess performance of yourself, other individuals, or organizations to make improvements or take corrective action.\n, • The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.\n, • The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects.\n, • The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).\n, • The ability to see details at close range (within a few feet of the observer).\n, • The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.\n\n Responsibilities \n • Strong attention to detail and manual dexterity.\n, • Ability to read, interpret and adhere to technical drawings and read procedural documentation.\n, • Experience with fine hand-finishing or similar precision work preferred.\n, • Commitment to quality and safety standards.\n, • Able to safely and efficiently operate machinery and tooling\n, • Strong mechanical aptitude\n, • Open-minded, willing to learn\n, • Strong team player\n, • Excellent interpersonal skills\n, • Strong verbal and written communication skills\n, • Must comply with internal Safety and 6S Standards \n, • Detailed Oriented\n, • Complete understanding of Core Finishing processes (lvl I, II and III)\n\n QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school education or equivalent life experience and three to six months related experience or training. Ability to learn and to operate all injection machines and perform all functions of wax injection operation to include placement of patterns in wax setters or fixtures after injection. LANGUAGE SKILLS Ability to read and interpret documents, such as safety rules and work instructions and procedure manuals. Ability to record information on a daily basis. Ability to speak and listen effectively to follow instructions in English. Ability to write and speak complete sentences and understand verbal and written instructions in English. MATHEMATICAL SKILLS Ability to add and subtract two- and three-digit numbers and to perform simple multiplication and division. REASONING ABILITY Ability to apply commonsense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, climb or balance and stoop, kneel, crouch, or crawl; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms. The employee must regularly lift, push, pull and/or move up to 25 pounds, occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, ability to distinguish between colors, depth perception, and the ability to adjust focus to recognize defects in patterns WORK ENVIRONMENT The work environment characteristics described here are representative of those employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The noise level in the work environment is usually moderate. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles. Due to government regulation only US persons (U.S. citizen, U.S. naturalized citizen, U.S. permanent resident, holder of U.S. approved political asylee or refugee status) may be considered for this role. Chromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations. Chromalloy is an equal opportunity employer - vets/disabled. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please contact:

Contracting CDL-A Owner Operators • RUN YOUR BUSINESS. KEEP MORE OF IT. - Earn 75% of linehaul + 100% FSC, • REAL FREIGHT. REAL FREEDOM. - No forced dispatch, book the loads you want Tennessee Steel Haulers is built by owner operators, for owner operators. We are a 100% owner-operator company that believes drivers should have control over their freight, their schedule, and their earnings. Here, you're not answering to forced dispatch or chasing empty promises. You're booking quality customer freight, getting paid fast, and backed by a support team that understands what it takes to run a successful flatbed operation. Owner Operator Job Overview • High earning potential, paid the right way. Top owner operators net up to $3,000 per week, with average gross earnings ranging from $5,000-$7,000 per week, depending on freight and lanes., • Strong percentage pay that adds up. Earn 75% of linehaul, plus 100% fuel surcharge, tarping pay, stop pay, and detention pay - so every part of the job is compensated., • Freedom to book the freight that works for you. No forced dispatch. Choose from a variety of flatbed freight lanes and run the loads that make the most sense for your operation., • Limited-time sign-on bonus. Owner Operators can earn a $3,000 sign-on bonus for a limited time - talk to a recruiter for details., • Fast pay and financial flexibility. Same-day settlements on delivered loads, plus fuel discounts, EFS fuel cards, and in-cab scanning to keep cash flowing smoothly., • Operator-focused support. Work with a dedicated driver support specialist, earn $2,000 referral bonuses, and qualify for clean inspection and driver-of-the-month incentives. Driver Requirements • Valid CDL A license, • 1 year or more OTR driving experience (not local), • 6 months or more Flatbed driving experience Work Location: On the road Reference Number: 231800014-103125

Job Description CDL-A Owner Operator drivers are needed in Tampa, FL, for contract work. 1. Job Types: Full-time, Contract, 2. Local lanes (<500 miles daily), 3. Local liquid and hopper lanes, 4. Flexible scheduling (weekend work available), 5. Average $3,000-$4,000 weekly, 6. Fuel surcharge program, 7. Tanker, TWIC, and Haz-Mat endorsements required (can begin while waiting for Haz-Mat to be completed), 8. Weekly average 50-70 hours, 9. Incentives - fuel card / fuel discounts / parts and tires discounts / 24/7 dispatch support What Are YOU Waiting for? Give us a call at 800-741-6800 for more information! Compensation details: 3000-3500 PI1a15db21ebf8-25405-39456437

Owner Operator | Dry Van Location: Tampa, FL Company: CRST, The Transportation Solution Pay: Competitive weekly pay (inquire for details) Route Type: otr Start Date: ASAP About the Position CRST Specialized Solutions is looking for independent contractor teams (Owner Operators) to haul specialty freight across the country. As a Specialized contractor, you choose your home time, loads, and schedule. Run your truck and enjoy the profits of your own hard work. The Specialized fleet has under 30% turnover and best-in-class support staff. Apply or call today! Job Details: Team Owner Operator Positions Home time is up to you Bonus home time in short periods with CRST Get Thru Home program Driving lower 48 states Driver assist position - loading and unloading freight Compensation & Benefits: Tolls are 100% paid Fuel discount $0.18 per gallon Top 25%* of contractors gross $8,000 to $10,000/wk or more to the Truck! $2.03 CPM-based on 2025 average, fluctuates as fuel surcharge changes ALL MILES PAID $6k Sign on Bonus to the truck Low lease expense vs industry average Stable miles - freight available and increasing. *The top 25% earners typically stay out 4 weeks with 3-4 days home and accept 99% of offered loads. Benefits are offered through a 3rd Party Optional health insurance offered thru True Choices Personal Insurance. Questions about what they have to offer? Please call 800-877-9637. Requirements 21 years or older CDL A, 6 months OTR or regional (Cross state lines, elogs, sleeper TT) for Solo or Lead driver. Codriver must have 3 months OTR/Regional Qualified applicants with arrest and conviction records will be considered for employment pursuant to applicable federal, state, and local laws.

Owner Operator | Dry Van Location: Tampa, FL Company: Christenson Transportation Pay: $1.25 to $1.75 per mile Route Type: otr Start Date: ASAP About the Position WHAT ARE YOU WAITING FOR? CDL-A Lease Purchase Opportunity Unlock Your Potential with Christenson Transportation! Earn $190,000 – $230,000 Gross Annually! 2025 & 2026 Best to Drive For! At Christenson Transportation, we’re not just a trucking company — we’re a customer-based carrier that truly values our drivers. Whether you're an experienced driver ready to own your truck or looking to lease and eventually own, we have the perfect fit for you! What You Can Expect: Earn $190,000 – $230,000 gross yearly ️ Average 2500–3000 miles per week Late-model 2024–2026 Peterbilt 579 Epic Ultra Loft 2–3 weeks out with 2–3 days home (depending on location) ✅ NO Credit Check ✅ NO Down Payment ✅ NO trailer rental fees ✅ NO touch freight ✅ NO forced dispatch ️ 100% of truck & trailer maintenance covered 100% tire and maintenance discounts ️ 100% tolls paid by Christenson ⛽ 100% of fuel discounts passed on to you! ⚖️ 100% Pre-paid legal plan — paid by Christenson 70% Drop & Hook Other Benefits & Perks: FREE WIFI Tablet with unlimited data for live streaming Low weekly payments Lease Completion Bonus: Up to $7,500! Customer-based freight Additional pay: Multiple stop, layover, & detention Pet and passengers allowed (conditions apply) 24/7 driver lounge with showers, washer/dryer, computer/internet & more Longevity STAY PAY Bonuses Paid every 90 days after 1 year of service! Year 1: $1,000 total ($250 quarterly) Year 2: $2,000 total ($500 quarterly) Year 3: $3,000 total ($750 quarterly) Year 4: $4,000 total ($1,000 quarterly) Year 5+: $5,000 total ($1,250 quarterly) APPLY TODAY! Take the wheel of your future — Join Christenson Transportation now! Requirements Must have 2 years of verifiable Class A CDL experience. Must have a valid Class A CDL. Must have a valid DOT physical. Must pass a DOT pre-employment drug screen. No DUI or DWI convictions within the past 5 years. Must be able to read, write, and speak the English language in accordance with FMCSR. Stable job history for the past 3 years. No more than 3 preventable accidents in the last 3 years. No convictions for a "serious or disqualifying traffic violation" within the last 3 years, including: Excessive speeding of 15 mph or more over the posted limit. Reckless driving Improper or erratic lane changes Following to close Hit and run, failure to report, and accident No suspension/revocations in the past 12 months. No "preventable" DOT reportable accidents in the past 3 years.

Owner Operator | Dry Van Location: Tampa, FL Company: Clark Transfer Pay: $3,500 to $5,000 per week Route Type: otr Start Date: ASAP About the Position Since 1949, the people of Clark Transfer have moved the sets, lights and costumes for countless Broadway shows and live entertainment productions. This is specialized work which requires us to fit into a uniquely “show-business” way of operating. Clark Transfer runs exclusively with leased-on Owner/Operators who pull Clark Transfer’s customized 48’ and 53’ trailers. Clark Transfer operates directly in 48 states and Canada. Clark Transfer continues today under the same ownership and management. It is widely recognized as the “gold standard” for transportation in the theatrical industry. Benefits: Most singles earn $175,000 to $225,000+ on less than 85k miles Solos: Guaranteed minimum weekly average: $3,500/week worked (most earn $3,750 - $4,250+) Most teams earn $275,000 to $325,000+ on less than 110k miles Teams: Guaranteed minimum weekly average: $5,000/week worked (most earn $5,500 - $6,500+) New: $3,500/$5,000 paid weekly for your first four weeks, including orientation (Singles/Teams) $1.60/gallon or lower fuel price guarantee (average, after fuel surcharge) New bonus for 2022, paying $2,500/$5,000 per quarter for Singles/Teams Company Supported Owner Operator health insurance program All miles paid, plus detention pay Up to $5,000 referral bonus Paid fuel permits & fuel taxes Paid tolls while under dispatch via company provided transponder Paid cargo/liability insurance Flexible home time Call us for more information or APPLY NOW! Requirements Truck Driver Requirements Must be an Owner Operator Minimum Age: 23 Class A At least 2 years of verifiable OTR experience Clean motor vehicle record for the last 3 years Tours may require time away from home

Owner Operator | Dry Van Location: Tampa, FL Company: Clark Transfer Pay: $3,500 to $5,000 per week Route Type: otr Start Date: ASAP About the Position Since 1949, the people of Clark Transfer have moved the sets, lights and costumes for countless Broadway shows and live entertainment productions. This is specialized work which requires us to fit into a uniquely “show-business” way of operating. Clark Transfer runs exclusively with leased-on Owner/Operators who pull Clark Transfer’s customized 48’ and 53’ trailers. Clark Transfer operates directly in 48 states and Canada. Clark Transfer continues today under the same ownership and management. It is widely recognized as the “gold standard” for transportation in the theatrical industry. Benefits: Most singles earn $175,000 to $225,000+ on less than 85k miles Solos: Guaranteed minimum weekly average: $3,500/week worked (most earn $3,750 - $4,250+) Most teams earn $275,000 to $325,000+ on less than 110k miles Teams: Guaranteed minimum weekly average: $5,000/week worked (most earn $5,500 - $6,500+) New: $3,500/$5,000 paid weekly for your first four weeks, including orientation (Singles/Teams) $1.60/gallon or lower fuel price guarantee (average, after fuel surcharge) New bonus for 2022, paying $2,500/$5,000 per quarter for Singles/Teams Company Supported Owner Operator health insurance program All miles paid, plus detention pay Up to $5,000 referral bonus Paid fuel permits & fuel taxes Paid tolls while under dispatch via company provided transponder Paid cargo/liability insurance Flexible home time Call us for more information or APPLY NOW! Requirements Truck Driver Requirements Must be an Owner Operator Minimum Age: 23 Class A At least 2 years of verifiable OTR experience Clean motor vehicle record for the last 3 years Tours may require time away from home

CDL-A Owner Operator Jobs | Independent Contractor Opportunities REAL Security. REAL Freight. REAL Pay. Driver with Confidence. Partner with Freymiller. Are you a CDL-A Owner Operator or Independent Contractor looking for: • Steady miles, • High-paying freight, • Weekly pay NEW Pay Raise Just Dropped! • Up to 70% Line Haul Revenue, • Fuel Surcharge - Ask Us How, • Big Sign-On Compensation!, • We Cover Travel to Orientation, • Paid Drop & Pick-Up, • Weekly Settlements = Fast Cash Flow, • Huge Fuel Discounts (Best in the Industry) Don't just drive- partner up. Call Recruiting Today and see what's possible with Freymiller. Apply Now or Call #OwnerOperatorjobs #CDLAJobs #IndependentContractor #TruckingLife #FreightOpportunities #OTRDriver #TruckDriverJobs #Freymiller

Champions Do More As one of the fastest-growing and most exciting brands in the industry, Crash Champions is the largest founder-led multi-shop operator (MSO) of high-quality collision repair service in the U.S. The company, which also operates the growing Crash Champions LUXE | EV Certified brand of highline and luxury EV repair centers, services customers at more than 650 state-of-the-art locations in 38 states across the U.S. Crash Champions was founded in 1999 as a single Chicago repair center by industry veteran and 2023 EY Entrepreneur of the Year Midwest award winner Matt Ebert . For more than 25 years, our vision has been anchored by the belief that delivering superior collision repair service is about People First. Welcome to Crash Champions. We Champion People. Responsibilities • Examines damaged vehicle and efficiently plans repair process., • Works and communicates with others on vehicle repair status., • Performs quality repairs while keeping on-time status in mind., • Makes decisions on repair vs. replace considering safety, cost, and cycle time., • Removes upholstery, accessories, electrical and hydraulic window operating equipment, and trim to gain access to vehicle and fenders., • Participates in all required safety meetings., • Files, grinds, and sands repaired surfaces, using power tools and hand tools., • Directs the work of an apprentice in the performance of tasks when needed, i.e., unusual problems or questions and explains procedures to assistant. Qualifications • Ability to use frame machine., • Certification in body repair preferred., • Knowledge of vehicle repair process by manufacturer., • I-CAR welding certified., • Skill in analyzing and interpreting measuring data., • Ability to supervise repair personnel., • Must be able to pass thorough background check Benefits The Company offers the following benefits for this position, subject to applicable eligibility requirements and annual updates: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Group Life Insurance, • Disability Insurance, • 401k Retirement Plan with match, • Referral Bonus (“Cash From Crash”) This position is paid on a commission/ flag rate structure. Flag pay is guaranteed to meet local minimum wage requirements for all hours worked each week. The compensation range listed is the average flag pay range for a typical full-time employee in this position. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Submit a Referral Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $163,620.00/Yr. ID 2025-17930 Category Body Technician Position Type Regular Full-Time Location : Postal Code 33613 Location : Address 14701 N Nebraska Ave Remote No Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $163,620.00/Yr. Prioritization Tier 1 – Priority

A Snapshot of Your Day You will be ensuring the quality and consistency of blue dye products through thorough inspection and testing processes. This role involves monitoring production processes, conducting quality checks, and documenting findings to maintain high standards of product quality in our Gibsonton Florida Location. How You'll Make an Impact \n • Inspect and blue dye production cores for consistency, quality, and adherence to specifications.\n, • Monitor production processes to identify any deviations from quality standards.\n, • Document inspection results and report any issues to the production team.\n, • Collaborate with quality assurance teams to implement actions of improvement as needed.\n, • Maintain a clean and organized inspection area, following safety protocols.\n, • Evidence of a completed High School or GED is required.\n, • Previous manufacturing experience is a plus.\n, • Proficiency in the English language (reading, writing, speaking).\n, • Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization.\n, • This position will require an export license from the Department of Commerce, Bureau of Industry and Security, and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law.\n\nAbout the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards \n • Career growth and development opportunities; supportive work culture\n, • Company paid Health and wellness benefits\n, • Paid Time Off and paid holidays!\n, • 401K savings plan with company match\n, • Family building benefits\n Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

Job Description Smart, Innovative, and Hard-working? Perfect! We are growing and need the right people with the right mindset. Join our family and find a home where you will enjoy working with your peers, be challenged to work hard, and have some fun in the midst of it all. We are proud to have been named the National Apartment Association's 2025 Best Workplace in the Supplier Category. Benefits that drive themselves • $18-19 / Hour Based on Experience and Performance Based Bonuses!, • Full Time, Monday-Friday, 7AM - 3:30PM, • Paid Holidays Off and No Weekends!, • We offer full benefits such as medical, dental, vision, life insurance, disability, 401K, 104 hours of paid time off accrual, and much more!, • Employee discount program!, • Long-Term Career Opportunities! Many of our leaders started with Chadwell Supply looking for a job, just like you, but found long-term career opportunities at one of our 28 Branches across the Country., • Named Top Companies USA 2022, 2023, 2024 and 2025! Chadwell Supply is a successful family-owned maintenance supply company with 28 Branches Nationwide. We are currently looking for an enthusiastic, energetic, and detail-minded individual to work as a Chadwell Supply Receiving Clerk. What you will need • You must be 18 years or older., • Ensures all inbound product from vendors and distribution branches is checked and counted against packing slips and receiving documents for quantity and shipment accuracy., • Accurately stocks and shelves received product in correct bin locations., • Properly records all products received by bin location and quantity in the computer operating system. ZWdu8fWA41

Job Description RIPA & Associates is a civil and utility construction company headquartered in Tampa, Florida. We specialize in a wide range of projects, including commercial, multifamily, residential, and public sector developments throughout Central Florida. Since our establishment in 1998 by Frank Ripa, we have consistently ranked among the Top 100 Private Companies in the Tampa Bay area. At RIPA, our continued success as a site contractor is attributed to our highly experienced and knowledgeable field management team. Comprising skilled project managers and superintendents, they are the driving force behind our exceptional quality, productivity, and exceptional customer service. Our employees are actively involved in professional organizations such as NUCA, SUCA, Associated Builders & Contractors, TBBA, American Society of Professional Estimators, the Society for Human Resource Management, and HR Tampa Working at RIPA & Associates comes with a range of benefits, including but not limited to: Medical, Vision, and Dental insurance, Shorterm Disability, Voluntary Life insurance, Paid Time Off (PTO), Referral Program, Employee Assistance Program, Company-provided Life insurance, and a 401(k) retirement plan. We are seeking an experienced Survey Party Chief to lead a field survey crew supporting civil construction projects. This role supports UTS, GNSS, and machine control operations across a full construction fleet and works closely with project managers, superintendents, and field technology teams. Responsibilities: • Lead and manage daily survey crew operations, • Plan daily work activities and site logistics, • Ensure safety, accuracy, and productivity, • Coordinate with project management and field teams, • Establish and maintain horizontal and vertical control, • Perform layout for earthwork, utilities, curb, paving, and structures, • Perform independent check shots and tolerance verification, • Operate robotic total stations and GNSS systems, • Perform daily instrument setup, calibration, and validation, • Support machine control operations with control and verification, • Capture digital as-builts using UTS and GNSS, • Verify work against design models and plans, • Identify and communicate discrepancies early, • Maintain accurate field notes and control logs, • Coordinate data handoff with office and CAD staff, • Support model revisions and updates Qualifications: • 5+ years of construction survey experience, • Experience as a Party Chief or Lead Instrument Operator, • Strong experience with UTS (robotic total stations) and GNSS, • Ability to read and interpret civil construction plans, • Valid driver’s license, • Experience supporting machine control operations, • Familiarity with Trimble survey systems, • Experience on site development, roadway, or infrastructure projects, • Ability to mentor junior survey staff RIPA provides Equal Employment Opportunity (EEO) to all employees and applicants for employment without regard to Race, Color, Religion, Gender, National Origin, Age, Disability, Veteran Status, Genetic Information & Testing, Family & Medical Leave, or any other protected class in accordance with applicable Federal Laws. In addition, RIPA complies with applicable State and Local laws governing non-discrimination in employment and reasonable accommodation in every location in which the Company has facilities. This Policy applies to all Terms and Conditions of Employment, including, but not limited to hiring, placement, promotion, termination, layoff, recall, leaves of absence, compensation, and training. Company DescriptionRIPA & Associates is a civil and utility construction company headquartered in Tampa, Florida. We specialize in a wide range of projects, including commercial, multifamily, residential, and public sector developments throughout Central Florida. Since our establishment in 1998 by Frank Ripa, we have consistently ranked among the Top 100 Private Companies in the Tampa Bay area.RIPA & Associates is a civil and utility construction company headquartered in Tampa, Florida. We specialize in a wide range of projects, including commercial, multifamily, residential, and public sector developments throughout Central Florida. Since our establishment in 1998 by Frank Ripa, we have consistently ranked among the Top 100 Private Companies in the Tampa Bay area.

Job Description Owner-Operators in Florida area needed for South East regional runs and/or Mid West area. We have plenty of freight to keep you rolling and earning! There is no forced dispatch so you can choose how hard you want to run! Here’s your opportunity to sign on with a Florida based company and make the good money you’ve been looking for! CALL NOW TO GET STARTED! We offer Owner-Operators: · Two pay packages · Fuel card w/discount · Complete truck insurance program · Plate program · Optional Maintenance account · Weekly settlement by direct deposit · Plus much more! Call 863.342.5171 or apply online now at Company DescriptionVoyager Nation is Florida’s #1 Choice for Owner Operators. We are a fast-growing trucking company that provides Owner Operators with the support that they need to be successful. This type of support wouldn’t be possible without the collective brainpower of the visionaries and problem-solvers that push this company forward. Together, we are able to drive results and revolutionize the tranportation industry.Voyager Nation is Florida’s #1 Choice for Owner Operators. We are a fast-growing\r\ntrucking company that provides Owner Operators with the support that they need to be\r\nsuccessful. This type of support wouldn’t be possible without the collective brainpower\r\nof the visionaries and problem-solvers that push this company forward. Together, we\r\nare able to drive results and revolutionize the tranportation industry.

Job Description Job Purpose: To ensure all tractors coming into the terminal for trade, lease to owner operator, abandonment or any reason the driver is unable to continue driving, will be in the cleanest possible condition both inside and out including the engine. Responsibilities: 1. Wash outside of truck., 2. Steam spray the engine., 3. Clean inside the cab and sleeper including installing new mattress., 4. Package the drivers personal belonging in circumstances that the driver is unable to perform this task., 5. Maintain cleanliness of the wash bay floors, hoses and drains., 6. Other duties as required. Relationship: Work with all levels of employees, drivers and management. Abilities/skills required: Verbal communication and listening skills Physical Requirements: Sitting, standing, bending, stooping, lifting, and physical dexterity. Must be able to lift up to 100 lbs. Education/training requirements: High school diploma or equivalent, experience with cleaning products is desireable.

Job Description ACB Xpress Corporation – NOW HIRING OTR DRIVERS HIRING ASAP ACB Xpress is hiring CDL-A TEAM drivers based in Florida for OTR ( Amazon and LTL) loads This position offers consistent miles, light freight, fast check-in and check-out, and reliable weekly pay. Amazon loads provide smooth operations with simple procedures, minimal wait time, and steady freight. Most loads are drop and hook. After delivery, drivers are bobtail and dispatched to the next load. We are seeking a reliable FTL driver to transport full truckload shipments efficiently. This position involves drop-and-hook operations and consistent linehaul routes. Enjoy smooth operations and minimal wait times while maintaining timely deliveries. Pay & Miles $4,000 – $6,000 per week per team (split) 5,000 miles guaranteed for TEAM drivers Weekly pay via direct deposit every Friday (1099 tax form) Paid when all assigned loads are completed on time Equipment: Late-model 2024–2025 trucks Volvo, Freightliner, International, Peterbilt Team comfort features: New mattress Refrigerator & microwave Inverter Tablet and ELD provided Fuel card, Bestpass, PrePass included Freight Details: Light dry van freight No-touch freight Schedule: 4 weeks out / 4 days home Transportation provided for home time Responsibilities: Safely operate tractor-trailer as a team Follow DOT and company safety regulations Maintain accurate logs and delivery documents Communicate with dispatch regarding routes and schedules Requirements: Valid CDL-A license Minimum 1 year OTR experience Team driving only SAP drivers not accepted Apply Today Fast hiring process — get dispatched quickly. Company DescriptionACB Xpress Corporation is a fast-growing trucking company built on honesty, respect, and strong support for drivers. We keep our fleet well-maintained, guarantee weekly miles, and offer steady pay. For owner-operators, we provide discounted repairs and fuel savings to lower costs and maximize take-home. Whether team, solo, or owner-operator, our drivers know they’ll get transparency, reliability, and the backing of a dispatch team that truly cares.ACB Xpress Corporation is a fast-growing trucking company built on honesty, respect, and strong support for drivers. We keep our fleet well-maintained, guarantee weekly miles, and offer steady pay. For owner-operators, we provide discounted repairs and fuel savings to lower costs and maximize take-home. Whether team, solo, or owner-operator, our drivers know they’ll get transparency, reliability, and the backing of a dispatch team that truly cares.

A Snapshot of Your Day You will be part of the manufacturing process in the core department that will result in the production of quality castings in the Gibsonton Florida location. Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines, and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. How You'll Make an Impact \n • Will work in the Core Department with CT Equipment. \n, • Utilizes process knowledge, basic engineering principles, previous experience, and creativity, as necessary to help develop and improve manufacturing processes that result in the production of quality castings that conform to customer specifications and meet desired lead times. \n, • Reads and understands engineering procedures to ensure adherence and compliance with approved processes. \n, • Participates in plant initiatives to support the reduction of scrap and overall casting costs. Initiatives include but are not limited to daily production meetings, NPI review meetings, and special participation in cost improvement teams. \n, • Performs metal rework required to eliminate typical defects observed on casting surface (Benching, Sandblast, FPI Rework, etc.). \n, • Collaborates to improve ergonomics and safety conditions of assigned areas. \n\n What You Bring \n, • Evidence of a completed High School or GED is required. \n, • Previous related CT or manufacturing experience is a plus. \n, • Proficiency in the English language (reading, writing, speaking). \n, • Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization. \n, • This position will require an export license from the Department of Commerce, Bureau of Industry and Security, and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law. \n\n About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards \n • Career growth and development opportunities; supportive work culture \n, • Company paid Health and wellness benefits \n, • Paid Time Off and paid holidays! \n, • 401K savings plan with company match \n, • Family building benefits \n Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

Job Description Owner-Operators - Maximize Revenue (90% Split) This is a highly lucrative business partnership designed for entrepreneurial truck owners to maximize their truck's profitability using our network of high-paying freight. • Commission: Only 10% split – you keep 90% of the load revenue., • Work Provided: Steady, year-round, dry-van freight sourced from Amazon (Team Drop & Hook) and our direct contracts with Other Shippers to ensure high rates and minimum deadhead miles., • You Cover (Standard O/O Costs):, • Fuel, • ELD (Electronic Logging Device), • Tires & mechanical repairs, • Truck maintenance & breakdowns, • Insurance coverage, • Cab Card Fees / CARB, • Estimated Weekly Net Profit (Your Take-Home):, • Average Weekly Profit: $2,500 to $4,000+, • Monthly Profit: $10,000 to $16,000+, • Note: This is your profit after all operating expenses (fuel, etc.) are paid and it is an estimate., • Requirements:, • Own truck (sleeper cab preferred for team runs), • Steady, year-round freight from consistent sources like Amazon., • Transparent pay structure with a leading 90% commission split for O/Os., • Simple onboarding process. Call Shawn at 863-397-5049 to apply or learn more. When calling, please specify whether you’re applying as a CDL team driver or owner-operator. Company DescriptionAt Jacob’s Express LLC, we’re more than just a trucking company — we’re a family. Based in Florida and running lanes nationwide, we specialize in Amazon drop-and-hook freight and offer steady, year-round work for both CDL drivers and owner-operators. We keep it simple and fair: drivers enjoy consistent schedules and great pay, while owner-operators keep 90% of the load revenue and control their own expenses. We believe in respect, honesty, and helping our team grow. If you’re ready for reliable freight, a transparent pay structure, and a company that treats you like a partner — welcome to Jacob’s Express.At Jacob’s Express LLC, we’re more than just a trucking company — we’re a family. Based in Florida and running lanes nationwide, we specialize in Amazon drop-and-hook freight and offer steady, year-round work for both CDL drivers and owner-operators. We keep it simple and fair: drivers enjoy consistent schedules and great pay, while owner-operators keep 90% of the load revenue and control their own expenses. We believe in respect, honesty, and helping our team grow. If you’re ready for reliable freight, a transparent pay structure, and a company that treats you like a partner — welcome to Jacob’s Express.

This Jobot Job is hosted by: Jeremy Lee.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $90,000 - $160,000 per year.Founded more than 20 years ago, we have grown from a regional contractor into a multi-state operator with offices in key urban centers,

Job Description The Packing Operator is responsible for efficiently and accurately packing finished products into containers, bags, or boxes for distribution. This role ensures product quality, adheres to safety and sanitation standards, and supports the smooth operation of the production line. • Pack into designated containers, pouches, or boxes according to specifications, ensuring correct quantities and proper sealing. • Visually inspect finished products for defects, consistency, and proper packaging; remove or report non-compliant items. • Apply labels, date codes, or batch numbers to packages, ensuring accuracy and compliance with regulations. • Operate basic packing machinery (e.g., sealing machines, conveyors) and report any malfunctions to supervisors. • Maintain a clean and organized packing area, following food safety standards (e.g., GMP, HACCP) and sanitizing workstations as required. • Assist in tracking and organizing packed goods, ensuring proper storage and readiness for shipping., • Work with production, quality control, and warehouse teams to meet production schedules and maintain workflow. High school diploma or GED. Experience: • Basic knowledge of food safety regulations (e.g., FDA, HACCP) preferred. • Previous experience in food manufacturing or packing is preferred but not required. Knowledge, Skills, and Abilities: Ability to follow written and verbal instructions, including packing specifications. Physical ability to stand for long periods, lift up to 40 lbs, and perform repetitive tasks. Attention to detail and commitment to quality standards. Strong teamwork and communication skills. Comfortable working in a fast-paced environment.

Job Description Be a Star at the Straz Center for the Performing Arts! Under the supervision of the HVAC Plant Operator and/or the Director of Facilities this position is responsible for the implementation of HVAC preventative maintenance programs, as well as the upkeep and maintenance of all HVAC related equipment including the chiller plant. In particular, the Maintenance / HVAC Technician will serve in a general capacity to provide support in every aspect of building maintenance with a focus on the HVAC plant operations and system component maintenance and associated record keeping. Located in downtown Tampa, the 335,000 square-foot Straz Center, one of the largest performing arts complexes in the country, offers a team-based work environment that shows our dedication to the community every day. We reward our full-time employees with a strong benefits package including options for health/dental, vision, etc., discounted downtown parking, food and show discounts, plus a generous 403(b) plan and up to 27 days of PTO/Holidays per year. Essential Functions: • Responsible for all mechanical rooms, air handling units, pumps, valves, interior drinking water fountain systems, Fountain pumps, domestic/mechanical water systems and Fire alarm systems., • Assists in producing weekly HVAC Schedule and monitoring and adjusting HVAC system / controls on a daily basis and, according to exterior conditions, will make adjustments to maintain comfortable temperature and humidity levels in all areas of the building., • Must be able to repair all mechanical, electrical and electronic components of the HVAC and other systems building wide. Emphasis lies on in-house repair but will call in qualified contractor when repair exceeds skill level., • Assists outside contractors, as necessary., • Carries out preventive maintenance program on all mechanical and electrical HVAC equipment in a timely manner. Must keep entries in the computerized maintenance log and manual equipment files current. Recommends equipment and modifications to systems that will improve maintainability and efficiency., • Assists in facilities construction, renovation projects and special event setup, as needed., • Performs a wide range of general maintenance repair work including electrical, plumbing, painting, carpentry, etc., • Maintains the stocking levels/ records of refrigerants, HVAC related supplies, general Maintenance supplies and recommends purchases as needed. Maintains HVAC/Maintenance related stock and shelf areas and keeps them in presentable condition. Main emphasis lies on the chiller room, tower area, and mechanical rooms., • Works flexible shifts including nights, weekends, and holidays to cover events, • Must be able to report for duty within 30-45 minutes when called to respond to an emergency after regular scheduled shifts., • Must have a working knowledge of all associated hand-and power tools, meters and recording instruments., • Must be able to read and work off blueprints and schematics., • Must be able to comprehend chiller plant & EMS operation and monitor plant operation., • Strong background in electrical and mechanical system repairs is required., • Familiarity with building construction, maintenance practices in major facilities or plant environment is necessary., • Must have strong organizational skills., • Must have knowledge in the use of computerized energy management systems and HVAC control systems., • Commercial HVAC technician, certification preferred with Commercial/ large facility background and appropriate universal refrigeration license as required by 40CFR., • A minimum of 2 years as a chiller plant operator or commercial service technician. The physical demands described here are representative of those that must be met by an employee to successfully perform the functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. • The physical demands for this position include frequent standing for extended periods of time and the use of hands and fingers to handle and feel objects, tools and controls with which to operate., • The physical demands for this position include frequent standing for extended periods of time and the use of hands and fingers to handle and feel objects, tools and controls with which to operate specialized equipment and tools., • The employee is frequently required to reach with hands and arms to operate and/or repair equipment., • The employee must frequently squat, stoop or kneel, bend at the waist and reach above the shoulders, head and horizontally., • The employee continuously uses hand strength grasp tools and climb on ladders. The employee will frequently bend or twist at the neck and trunk more than the average person while performing their job duties., • The employee must frequently engage in heavy labor including the ability to move up to 50 pounds such as a tool box. Occasionally, the employee will lift and/or move up to 100 pounds such as motors, furniture, lumber, etc., • The employee will sometimes push/pull items such as motors, equipment, furniture, etc., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. The individual must be able to hear well enough to communicate with coworkers, in person, on the phone, or via radio and to be able to discern potential problems with equipment. The work environment characteristics described here are representative of those an employee encounters while performing the functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. • The noise level in the work environment is usually moderate to high. Travel: This position is not expected to require travel. The David A. Straz, Jr. Center for the Performing Arts, Inc. is an equal opportunity employer committed to being an inclusive workplace and strongly believes in the importance of having a diverse group of individuals represented. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, sexual orientation, age, disability, gender identity, marital or veteran status, or any other protected class. Please visit our website at to learn more about the Straz Center. Job Posted by ApplicantPro

Job Description Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Track Operator, you will be at the core of the day to day operations, leading and guiding our customers to a fun, safe karting experience. Is this you? Duties and Responsibilities: • Provide excellent customer service to all K1 Speed visitors, • Run races precisely, on time and safely, • Maintain track cleanliness at all times, • lifting required, • Standing for long periods of time, • Enthusiastically brief guests on safety rules before entering the track, • Assist guests with needed safety equipment, • Control races in a safe manner to maximize the FUN for guests, • Must be at least 18 years of age, • Provide proof of identity and eligibility to work in the United States, • Must have reliable transportation, • Weekends are a must!, • Must be able to read, write and speak English, • Must be able to communicate effectively in front of large groups, • Must be able to adhere to all company policies and procedures, • Must be willing and able to drive the karts daily, • Must be able to remain calm under stressful situations and effectively respond to safety concerns. **By apply to this position, you agree that you can preform the duties listed above.

Job DescriptionDescription: Job Title: Press Brake Reports to: Production Supervisor Basic summary of the job: Perform set-up and operation of press brake machine to provide quality parts to internal and external customers Essential (Primary) Functions include but are not limited to: • Sets up and operates press brake equipment to form customer specific parts, • Assures proper operation of equipment by monitoring quality of parts produced and conducting 1st Article procedures, • Assures materials exiting press brake machines meet drawing requirements and quality standards, • Package and mark materials as necessary, • May stage materials properly to assure loaders can efficiently lift and load materials, • Reports accidents, injuries and incidents immediately to the supervisor, • Responsible for assuring productivity and quality standards are consistently met, • Responsible for maintaining an orderly area around utilized machines and drop areas, housekeeping and material staging areas, • Perform general preventive maintenance on machine(s), • Complete production logs, • Adhere to Quality policy at all times, • Follow written quality procedures for specific job functions assigned Requirements: Required education/experience: • High School diploma or equivalent preferred., • Minimum of one year experience utilizing press brake equipment in a steel fabrication, service center or manufacturing environment heavily preferred, other experience considered. Necessary (required) skills: • Ability to read & interpret documents, instructions, manuals, &/or blueprints, • Ability to accurately read tape measure, calipers, micrometer, • Ability to add, subtract, multiply & divide all units of measure using whole numbers and fractions, • Must be able to handle multiple tasks simultaneously, • Crane & forklift experience required PHYSICAL ESSENTIAL FUNCTIONS: Must be able to walk, stand, sit, and apply all motor functions in order to perform the job. May be required to lift up to 50 pounds, operate overhead cranes and forklift.

Job Description General Purpose: The drive thru operator is expected to sell to and service drive-thru guests and collect for each meal prior to serving it. Essential (primary) Functions: The primary responsibility of the drive-thru operator is to sell and service each drive-thru guest within 3 minutes or less by administering the 7 steps to Drive-thru while maintaining guest sensitivity, cleanliness, restocking, sanitation, uniform, safety, security, cash and company policy requirements. Secondary Functions: Any and all other tasks assigned Essential Physical Requirements: * Good vision, general and close * Good hearing * Manual Dexterity * Standing, bending, stretching and walking throughout shift * Push and pull heavy objects * Lift and carry 30 pounds * Maintain good personal hygiene/uniform Essential social & Mental Requirements: * Able to use computer register * Basic reading, writing and math skills * Retain verbal requests * Good verbal skills * Able to work shift work * Retain menu item information * Able to market the menu * Able to handle guest complaints * Works well with others * Able to count change * Maintain composure while under stress We use eVerify to confirm U.S. Employment eligibility.

Job Description BGIS is currently seeking a Maintenance Technician (Roving) to join the team in Tampa, FL. BGIS is a leading provider of integrated real estate management services, including facilities management, project management, energy & sustainability services, strategic workplace consulting, real estate services and capital planning. Its range of solutions, supported by efficient systems, processes, and people, enables it to create and optimize places that work for its clients. The team is dedicated to inspiring better business performance and helping clients focus on their core businesses. The Maintenance Technician (Roving) is responsible for operating the facility including, but not limited to mechanical other supporting systems, performing structured inspections, preventative and corrective maintenance, routine and on-demand services on facility mechanical equipment and other systems. The General Repair Technician is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection. RESPONSIBILITIES Troubleshooting • Performs work in accordance with established processes and practices., • Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection., • Performs regular facility, mechanical and other equipment and systems monitoring inspections, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained., • Responds to routine and on-demand service requests and performs preventative and corrective maintenance on facility mechanical equipment and other systems., • Monitors assigned facility by conducting facility walkthroughs for mechanical, electrical and other equipment system monitoring and inspection., • Operates facility mechanical and other systems, • Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements, • Participates in and assists with facility-related projects., • Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices and guidelines related to environmental, health and safety, fire protection and any other applicable requirements., • Maintains all assigned tools and arranges for repair and replacement where required, • Submits all expenditures on a timely basis., • High school diploma plus trades training and/or certification or licensing., • Minimum 3 years’ experience providing preventive and corrective maintenance on heating ventilation and air conditions systems, or pneumatic or hydraulic systems., • Sound knowledge of processes and practices relating to facility operations and maintenance, • Demonstrated ability to maintain, troubleshoot and repair (as per applicable qualifications) mechanical and other building systems and equipment, • Possesses a strong environmental, health, and safety mindset., • Strong client-service orientation along with a high sense of urgency, • Knowledge and understanding of Building Automation Systems (BAS), • Effective communication skills for the purpose of data relay, exchange, feedback, and clarification, • Mentoring skills required to support lower-level technician’s development, • Must be able and willing to work shifts, be available for on-call/standby and emergency callouts as they arise, • Must strictly adhere to Health and Safety policies including wearing required Personal Protective Equipment (PPE), • Must be capable of obtaining appropriate security clearance, • Ability to work at heights and from ladders., • Ability to regularly walk, use hands and fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl., • Regularly lift and/or move up to 75 pounds., • Respond to off hour emergency calls. Visit us online at for more information. Our company culture includes a robust mix of sound business practices and employee initiatives that promote personal and professional development, work/life balance, health and wellness and community involvement. The Company is an equal opportunity employer. We believe every employee has the right to work in surroundings that are free from all forms of unlawful discrimination. We are committed to providing equal employment opportunity to all employees and applicants without regard to race, color, religion, gender, national origin, age, disability, ancestry, creed, marital status, sexual orientation, or Veteran or military status, genetic information or any other basis prohibited by local, state or federal law in the relevant jurisdiction. This policy applies to all terms and conditions of employment including, but not limited to employment, advancement, assignment, and training. BGIS is committed to strengthening our diversity through recruiting and retaining minority and women professionals from all backgrounds. Our commitment is consistent with our recognition that it is the outstanding people within BGIS who have always been the source of our strength. We recognize that promoting diversity is an integral component of our continuing quest for organizational excellence. This commitment to Equal Employment Opportunity is made equally as a social responsibility and as an economic and business necessity. Anyone with questions or concerns regarding Equal Employment Opportunity should contact their direct supervisor or the Human Resources Department without fear of retaliation of any kind. #LI-JV1 Company DescriptionBGIS is a leading provider of integrated real estate management services, including facilities management, project management, energy & sustainability services, strategic workplace consulting, real estate services and capital planning. Its range of solutions, supported by efficient systems, processes and people, enables it to create and optimize places that work for its clients. The team is dedicated to inspiring better business performance and helping clients focus on their core businesses. With over 20 years of experience, we employ over 5,000 skilled professionals and manage in excess of 56 million square meters of property and infrastructure, and delivers services that drive sustainable cost reductions for its clients. BGIS’ s clients benefit from the combined strength, expertise and leadership. When you join our team, whether as a seasoned professional or a recent graduate, you’re joining an industry-leading company that makes a difference in our communities, drives innovation through best practices and technology, and takes pride in being one of Canada’s Green 30 companies since 2010. We have been recognized by GI Jobs Magazine for Military Friendly 2017 and 2018, along with being the recipient of the 2018 Hire Vets Gold Medallion via the U.S Department of Labor. Visit us online at for more information.BGIS is a leading provider of integrated real estate management services, including facilities management, project management, energy & sustainability services, strategic workplace consulting, real estate services and capital planning. Its range of solutions, supported by efficient systems, processes and people, enables it to create and optimize places that work for its clients. The team is dedicated to inspiring better business performance and helping clients focus on their core businesses. With over 20 years of experience, we employ over 5,000 skilled professionals and manage in excess of 56 million square meters of property and infrastructure, and delivers services that drive sustainable cost reductions for its clients. BGIS’ s clients benefit from the combined strength, expertise and leadership. \r\n\r\nWhen you join our team, whether as a seasoned professional or a recent graduate, you’re joining an industry-leading company that makes a difference in our communities, drives innovation through best practices and technology, and takes pride in being one of Canada’s Green 30 companies since 2010. We have been recognized by GI Jobs Magazine for Military Friendly 2017 and 2018, along with being the recipient of the 2018 Hire Vets Gold Medallion via the U.S Department of Labor.\r\n\r\nVisit us online at for more information.

Job DescriptionSalary: LTC Solutions, LLC is a small business with ahuge commitment to supporting our employees and providing quality services to our government clients. Our employees have an entrepreneurial spirit, a passion for excellence, and a proactive approach to providing the best possible solutions to our clients. If you are committed to building excellent client relationships, providing consistent superior-quality work, and taking initiative to understand your clients needs, we would like to meet you! LTC offers a dynamic team setting and generous benefits (including 401K, PTO, and Health, Dental, Vision, Life and Disability Insurance). POSITION: C4ISR Network Operations Specialist LOCATION: Tampa, FL STATUS: Full time Contingent Hire REQUIRED QUALIFICATIONS: • Education: Bachelors Degree in Computer Science, Information Technology, Systems Engineering, Cybersecurity, or a related technical field., • Experience: Minimum of 810 years of professional IT/network engineering experience, with at least 5 years supporting DoD or USMC C4ISR systems in garrison and deployed environments., • Certifications: Completion of DoD 8570/8140 Information Assurance Workforce (IAW) certifications in compliance with SECNAV M-5239.2 requirements for Network Operations Specialist (441). Must maintain current certifications as directed by the government for CSWF (Cyber IT/Cybersecurity Workforce) compliance., • Must Have: Certification as a Privileged User in accordance with SECNAV cybersecurity requirements., • Must Have: CompTIA Security+ CE (baseline, required)., • Citizenship and Clearance: U.S. Citizen with Active Top Secret/SCI Clearance without conditions, exceptions, or waivers. Valid US Passport is required., • Travel: Ability to attend and represent MARCENT at C4ISR conferences, technical meetings, and training events. Must be able to travel domestically and internationally in support of deployed operations and C4ISR system sustainment., • Skills: Strong organizational and communication skills with the ability to brief senior leaders and interagency/coalition representatives persuasively. Ability to work independently with considerable latitude for initiative and innovation while ensuring technical soundness and compliance with DoD/USMC standards. DESIRED QUALIFICATIONS: • Education: Masters Degree in a relevant field of Cybersecurity, Network Engineering, or Systems Engineering preferred., • Educational Training: Completion of DoD/Service C4ISR, systems engineering, or acquisition-related training (e.g., DAU Systems Engineering, Defense Acquisition Workforce Improvement Act [DAWIA] certification) highly desirable., • Certifications: Cisco Certified Network Associate (CCNA) or higher, • Cisco Certified Network Professional (CCNP), • Microsoft Certified Solutions Expert (MCSE), • CISSP or equivalent (preferred for advanced proficiency) PRIMARY DUTIES: • Provide service as a local IT Subject Matter Expert (SME) within a TS/SCI environment, sustaining readiness of intelligence and C4ISR systems., • Provide hands-on experience with:, • Network configuration and administration (routers, hubs, LAN/WAN management)., • System administration tasks (Active Directory, PKI/Trusted Agent duties, account management, SharePoint administration, system patches, backups/restorations)., • C4ISR systems support including ISR, SIGINT, GEOINT, HUMINT, and CI-related platforms., • Information Assurance (IA) administration and compliance with DoD security directives., • Practical experience troubleshooting and resolving LAN connectivity issues, COMSEC devices, cabling, and network hardware., • Strong background in C4ISR architecture recommendations, including optimization of networks to support operational and training requirements., • Lead in ability to assist users and maintainers in diagnosing and correcting system deficiencies, applying advanced technical processes to optimize system performance, implementing procedures, processes, and technical techniques for system use., • Produce technical briefs, training materials, and communications content to support equipment users, leadership, and IT services awareness., • Must have familiarity with MARCENT and CENTCOM AOR IT operational environments, including integration with Joint and Coalition systems., • Provide capacity management, system sizing, and hardware replacement strategies., • Serve as a mentor and trainer, demonstrating technical processes and monitoring operator performance. LTC Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

CDL-A Owner Operator Jobs | Independent Contractor Opportunities REAL Security. REAL Freight. REAL Pay. Driver with Confidence. Partner with Freymiller. Are you a CDL-A Owner Operator or Independent Contractor looking for: • Steady miles, • High-paying freight, • Weekly pay NEW Pay Raise Just Dropped! • Up to 70% Line Haul Revenue, • Fuel Surcharge - Ask Us How, • Big Sign-On Compensation!, • We Cover Travel to Orientation, • Paid Drop & Pick-Up, • Weekly Settlements = Fast Cash Flow, • Huge Fuel Discounts (Best in the Industry) Don't just drive- partner up. Apply Today and see what's possible with Freymiller!

A Snapshot of Your Day You will be ensuring the quality and consistency of blue dye products through thorough inspection and testing processes. This role involves monitoring production processes, conducting quality checks, and documenting findings to maintain high standards of product quality in our Gibsonton Florida Location. How You'll Make an Impact \n • Inspect and blue dye production cores for consistency, quality, and adherence to specifications.\n, • Monitor production processes to identify any deviations from quality standards.\n, • Document inspection results and report any issues to the production team.\n, • Collaborate with quality assurance teams to implement actions of improvement as needed.\n, • Maintain a clean and organized inspection area, following safety protocols.\n, • Evidence of a completed High School or GED is required.\n, • Previous manufacturing experience is a plus.\n, • Proficiency in the English language (reading, writing, speaking).\n, • Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization.\n, • This position will require an export license from the Department of Commerce, Bureau of Industry and Security, and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law.\n\nAbout the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards \n • Career growth and development opportunities; supportive work culture\n, • Company paid Health and wellness benefits\n, • Paid Time Off and paid holidays!\n, • 401K savings plan with company match\n, • Family building benefits\n Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

Bausch + Lomb (NYSE/TSX: BLCO) is a leading global eye health company dedicated to protecting and enhancing the gift of sight for millions of people around the world-from the moment of birth through every phase of life. Our mission is simple, yet powerful: helping you see better, to live better. Our comprehensive portfolio of over 400 products is fully integrated and built to serve our customers across the full spectrum of their eye health needs throughout their lives. Our iconic brand is built on the deep trust and loyalty of our customers established over our 170-year history. We have a significant global research, development, manufacturing and commercial footprint of approximately 13,000 employees and a presence in approximately 100 countries, extending our reach to billions of potential customers across the globe. We have long been associated with many of the most significant advances in eye health, and we believe we are well positioned to continue leading the advancement of eye health in the future. Shift: Monday - Friday / 3:00pm - 11:30pm Start Pay Range: $22.00 Objectives/Purpose of the Job: Filling: The job functions and responsibilities include advanced operation of aseptic filling equipment including ointment fillers, gel fillers, solution/suspension fillers, line and equipment cleaning, line clearance, equipment disinfection, and proper documentation practices. Packaging: The job functions and responsibilities include advanced operation of packaging equipment including manual case labeling, visual inspections, bundling, cartoning, labeling, banding, line and equipment cleaning, line clearances, serialization, and proper documentation practices. Key Activities/Responsibilities/Job Functions: \n • Maintains production area to prevent cross-contamination (line clearance).\n, • Cleans/disinfects equipment after each run and performs line clearance.\n, • Responsible for maintaining OEE (system entry and standards).\n, • Properly document all activities and operations correctly and on time in the batch record.\n, • Performs basic troubleshooting to prevent equipment downtime.\n, • Performs preventive maintenance.\n, • Performs line change overs of format sizes.\n, • Meets and maintains all required training during the year (SOP, EHS, and HR).\n, • Support operational excellence and EHS initiatives. \n, • Assume responsibility for the GMP, ISO, EHS awareness and compliance within the respective area. \n, • Attend and participate in OpEx improvement initiatives such as reducing costs and OEE improvements.\n, • All other duties, as assigned.\n\n Packaging: • Operates packaging line and serialization equipment.\n Filling: \n • Transfer components into the aseptic area\n, • Set up for CIP/SIP\n, • Operates ointment, gel, solutions, and suspension filling lines including RABS fillers.\n \n • Line Clearance - Filling and Packaging\n, • Disinfection - Filling\n, • Aseptic Gowning - Filling\n, • Spare Parts/PM - Filling and Packaging\n, • Serialization - Packaging\n, • LOTO - Filling and Packaging\n, • CPMS - Filling\n, • RABS - Filling Qualifications/Training:\n\n\n \n • High School diploma or equivalent.\n, • Technical training preferred.\n, • This position requires three to five years as a Packaging Operator II, Aseptic Filling Operator IV, or equivalent experience.\n, • Able to work quickly and under pressure. \n, • Good documentation and math skills. \n, • Must be detail oriented and quality conscious.\n, • Good team oriented and excellent communication skills. \n, • Must be able to read, write, and speak English.\n\n This position may be available in the following location: Tampa, FL. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Job Applicants should be aware of job offer scams perpetrated through the use of the Internet and social media platforms. To learn more please read Bausch+Lomb's Job Offer Fraud Statement. Our Benefit Programs: Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.

Job Description Pediatric Health Choice, a PHS company specialize in providing exceptional care for medically complex, technology-dependent, and behaviorally challenged children. Our pioneering child-focused, family-oriented service model has set the standard across the nation. As the largest operator of Ambulatory Medical Day Health Centers in the U.S., we are proud to be Medicaid certified and fully licensed by state regulatory agencies, ensuring the highest standards of care and safety. • Position: Charge Registered Nurse (PPEC), • Location: Tampa, FL Assess and address physical, psycho-social, and developmental needs of children and families using the nursing process. * Develop and implement care plans based on nursing standards and treatment protocols. * Evaluate and adjust care plans based on patient outcomes and changing conditions. * Educate families on disease management and care techniques, adjusting teaching based on feedback. * Communicate effectively with physicians regarding patient status and changes in condition. * Maintain accurate medical records and documentation of nursing interventions and outcomes. * Advocate for patients and ensure confidentiality and dignity in care. * Coordinate care between families, physicians, and other healthcare providers. * Adhere to legal and ethical nursing practices and organizational policies. * Ensure infection control measures and safety protocols are followed. * Participate in professional development activities and staff meetings. * Delegate tasks appropriately to LPNs and nursing assistants based on patient needs. * Maintain professional conduct and appearance per organizational standards. * Attend to operational and patient care issues through established channels. * Operate and maintain medical equipment safely and effectively. * Manage supplies efficiently and report shortages promptly. * Perform clinical assessments and administer medications and treatments as prescribed. * Provide infusion therapy and manage intravenous lines as required. * Conduct technical nursing procedures according to standards and protocols. Transport (PPEC Facility Only): * Conduct pre-transport assessments of children, receive caregiver reports, and document details on transportation reports. Inform center nursing staff accordingly. * Accompany and ensure the safety of children during transportation to and from PPEC Center. * Manage emergency situations during transport, activate EMS as necessary, and notify the charge nurse for resolution. * Inventory and maintain emergency medical equipment daily. * Document and report maintenance and use of emergency equipment to Center Administrator or Charge Nurse, restocking supplies as required. * Perform daily checks of children's supply boxes, informing parents or nursing staff of any missing items. * Maintain transport phone logs as instructed. * Assist in developing and updating the Bus/Transport Schedule. * Follow Safeguarding of Children during Transportation Policy rigorously. REQUIREMENTS • Graduate of an accredited school of nursing for Registered Nurses., • Current State Licensure as a Registered Nurse., • Maintenance of CE credits as mandated in state of licensure., • Impactful Work: Make a profound difference in the lives of children and families facing unique health challenges., • Innovative Environment: Join a team at the forefront of pediatric health care innovation and best practices., • Career Growth: Explore diverse opportunities for professional development and advancement within our expanding network., • Collaborative Culture: Work alongside dedicated professionals who share a commitment to excellence and compassionate care., • Holiday Pay, • Paid Time Off, • Health and Dental insurance, • Short & Long-Term Disability and Life Insurance We look forward to learning more about you & the skills you can bring to Pediatric Health Choice! Pediatric Health Choice is an equal opportunity employer; we are committed to affirmative action and equal employment opportunities for all regardless of protected veteran status, race, color, creed, religion, national origin, sex, sexual orientation or identity, disability, age, marital status, familial status, membership or activity in a local human rights commission, or status with regard to public assistance. For more information visit:

A Snapshot of Your Day You will be part of the manufacturing process in the core department that will result in the production of quality castings in the Gibsonton Florida location. Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines, and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. How You'll Make an Impact \n • Will work in the Core Department with CT Equipment. \n, • Utilizes process knowledge, basic engineering principles, previous experience, and creativity, as necessary to help develop and improve manufacturing processes that result in the production of quality castings that conform to customer specifications and meet desired lead times. \n, • Reads and understands engineering procedures to ensure adherence and compliance with approved processes. \n, • Participates in plant initiatives to support the reduction of scrap and overall casting costs. Initiatives include but are not limited to daily production meetings, NPI review meetings, and special participation in cost improvement teams. \n, • Performs metal rework required to eliminate typical defects observed on casting surface (Benching, Sandblast, FPI Rework, etc.). \n, • Collaborates to improve ergonomics and safety conditions of assigned areas. \n\n What You Bring \n, • Evidence of a completed High School or GED is required. \n, • Previous related CT or manufacturing experience is a plus. \n, • Proficiency in the English language (reading, writing, speaking). \n, • Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization. \n, • This position will require an export license from the Department of Commerce, Bureau of Industry and Security, and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law. \n\n About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards \n • Career growth and development opportunities; supportive work culture \n, • Company paid Health and wellness benefits \n, • Paid Time Off and paid holidays! \n, • 401K savings plan with company match \n, • Family building benefits \n Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

Job DescriptionDescription:JOB DESCRIPTION Job Title: Groundman/ Underground Directional Drilling Industry: Utilities/ Power Department: Operations Reports To: Field Supervisor Location: Tampa, FL FLSA Status: Non-Exempt, Full-Time Compensation: Hourly, Health Benefits, Dental, Vision, Paid Vacation, Paid Holidays Job Summary: Under general supervision, this position performs tasks associated with the installation, maintenance, and replacement of electric underground cable. Including the set-up and clean-up process before and after placing the material underground. The person in this position is required to follow specific directions provided by the underground directional drill operator and the underground bore crew foreman. Responsibilities and Duties: • Must follow all company’s safety policies and procedures to ensure that appropriate safety precautions are taken in all circumstances and at all times., • Attend and participate in all safety meetings and training., • Dig pits and trenches manually or mechanically., • Perform site set-up and clean-up., • Restore and landscape disturbed areas of the jobsite., • Lay dirt, sand, grass seed and straw as needed., • Refill holes, trenches, and compact soil to ensure that it is packed down and even., • Place temporary asphalt patches or concrete on streets as needed., • Fill machines with diesel and grease machines as needed., • Clean vehicles, trailers, tools and equipment., • Safely and correctly direct multi-directional traffic with appropriate signage., • Safely identify utilities in the trench/bore path., • Use splice to connect pipe., • Hook up hoses to drilling machine, • Place hammer on drill., • Use dirt head to pull back fiber optics and pipe., • Operate machines in occasion (requires experience)., • Check equipment for safety., • Station equipment in safe area., • Drive a company’s truck to job sites if necessary. Ability and skills • Ability to follow instructions., • Ability to work responsibly and communicate effectively with crew members., • Ability to operate manual and mechanical equipment necessary to complete jobs., • Service experience of 1 year preferred., • The person in this position must have the ability to learn to operate new equipment and receive on-the-job training., • Able to work outdoors in all types of weather and conditions., • Able to work with loud noises., • Able to lifts and load workpieces or equipment of minimum 50 pounds in a daily basis., • Able to comply with job physical demands (e.g., standing, walking, driving, lifting etc.)., • Able to pass a pre-employment screening that includes background check and, • drug testing., • Friendly, supportive and dynamic work environment., • Pay is based on experience., • Training & advancement opportunities., • Accrual Paid vacation time and Holidays. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice. The employee has received a copy of the job description. The employee understands the requirements, essential functions and duties of the position. Requirements: Requirements Able to work outdoors in all types of weather and conditions. Able to work with loud noises. Able to lifts and load workpieces or equipment of minimum 50 pounds in a daily basis. Able to comply with job physical demands (e.g., standing, walking, driving, lifting etc.). Able to pass a pre-employment screening that includes background check and drug testing. Valid driver’s license.

Job Description NON CDL Box Truck Owner-Operator (OTR) – $5,500 - $7,500 Weekly We are seeking committed contractors to run one of the OTR routes available. What We Offer: • Weekly gross earnings: $5,500 – $7,500 Onboarding in as little as one day • You may run under our MC or yours, flexible partnership, • Fuel card program with $0.20 discount, • Sign-on bonus available, • Clean DOT inspection bonus, • General freight – mostly no-touch, • No forced dispatch, • No factoring fees, • OTR freight across 48 states, • 2-3 weeks out, • Fuel card program with discounts, • Sign-on bonus available, • Clean DOT inspection bonus, • 24’ or 26’ box truck (model year 2013 or newer), • At least 6 months of verifiable OTR experience, • Regular driver's license - Non-CDL

Job DescriptionDescription: BECOME A DRIVER FOR THE LARGEST BRIDGE BEAM HAULER IN THE USA! CDL-A Operator Positions Available HWH Transport is looking for experienced CDL-A Heavy Haul Operators. HWH Operators transport oversize loads, primarily infrastructure products from manufacturers to their destinations across the Southeast. Positions available in: • Jacksonville, FL, • Orlando, FL, • Tampa, FL, • Home every week!, • Gross annual income ranging from $70,000 - $90,000, • 401k, • Health insurance, • 2 + years verifiable experience transporting oversize loads, • Class A CDL license, • Current approved DOT physical

Job Description We are seeking a skilled and dependable Roll-Off Truck Driver to join our team, specializing in servicing construction and demolition sites. The ideal candidate will have experience operating roll-off trucks and be comfortable working in fast-paced, safety-critical environments. Key Responsibilities: * Operate roll-off container trucks to transport debris, materials, and waste to and from construction and demolition sites. * Deliver, position, and retrieve various-sized roll-off containers, ensuring proper placement and secure load handling. * Perform daily inspections of vehicle and equipment to ensure optimal operation and report any maintenance issues promptly. * Navigate urban, industrial, and rural job sites while adhering to DOT regulations and company safety protocols. * Safely swing and secure heavy container gates and ensure all loads are properly tarped and secured for transport. * Maintain accurate documentation of pickups, deliveries, and disposal logs. * Communicate effectively with dispatchers, site managers, and other team members to ensure timely service and problem resolution. Requirements: * Valid Commercial Driver’s License (CDL) – Class A or B preferred * Minimum of 1 year experience operating roll-off or similar heavy-duty trucks * Strong understanding of container handling procedures and safe load securement * Physically able to swing, lift, and secure heavy gates and container components * A clean driving record and strong commitment to safety and reliability * Self-motivated with the ability to work independently and manage a route efficiently Preferred Qualifications: * Experience with construction or demolition site logistics * Familiarity with local disposal facilities and hauling routes * Mechanical aptitude or minor truck troubleshooting skills Powered by JazzHR KTExSCMFO0

Job Description CDL-A DRIVERS: FIND YOUR FOREVER TRUCKING JOB $60,000 - $120,000+ | COMPANY, LEASE, AND OWNER OPERATOR POSITIONS Are you looking for a driving job that fits your life-not the other way around? I recruit for 25 top trucking companies nationwide, offering custom-matched opportunities based on your experience, goals, and home time needs. Whether you're a new CDL-A holder or a seasoned owner-operator, I can help you find your best route. As a former truck driver, I understand the long hours, the importance of home time, and what drivers really want. I work for you, not just the company. WHAT'S AVAILABLE: ● Company Drivers | Lease Operators | Owner Operators ● Regional, OTR, and Dedicated Routes ● CDL-A Required (OK if you need training - we've got you covered) PAY & BENEFITS: ● $60K - $120K+ annually based on experience and type of trucking ● Full Benefits Package: Medical, Dental, Vision, Paid Time Off ● 401(k) with Company Match ● Weekly Pay & Direct Deposit ● Paid Orientation & Training Programs ● Late-Model Equipment & 24/7 Driver Support HOME TIME THAT WORKS FOR YOU Flexible scheduling based on your availability and area. Be home when it matters most. Whether you're chasing top pay, more miles, better home time, or ownership opportunities, this is your chance to level up your driving career-with someone who knows the road and has your back. LET ME HELP YOU FIND YOUR FOREVER JOB. Contact: Tonia Baudoin 601-688-4141 Job Posted by ApplicantPro

Job Description Job Summary The Vacuum Truck Operator must be able to work in compliance in the delivery of MER’s four (4) core service lines (Emergency Response, Industrial and Marine Services, Facility Decontamination, and Site Remediation). Drivers must adhere to and maintain strict compliance with corporate/office policies and procedures, established health and safety protocols, and all applicable local, state, and federal regulations. Job Responsibilities Execution of field work encompassed in remediation and industrial maintenance projects while under direct or indirect supervision. Drive an average of 30% of the time as well as work onsite as part of a team. Depending on location, drivers may be asked to perform the duties of a Field Technician if business needs warrant it. Correct completion of all job-specific, employee-related and equipment-related MER paper work including Timesheets, Daily Work Reports, Driver’s Logs, Pre and Post Vehicle Inspection and Daily Tailgate Safety Meeting Forms. Understand and enforce project’s detailed scope-of-work to maintain strict compliance with contract documents, project schedules, and corporate policies and procedures. Work safely during all phases of performing the job duties required in the field. Ability to perform work inside areas of varying dimensions, involving squatting and crawling for possible extended periods. Ability to follow directions; read/speak and understand English; read and understand common danger placards / labels and hazardous warning literature including site safety plans. The ability to safely drive and perform safety checks on all vehicles for which licensed. Operate various vehicles safely, including but not limited to Vacuum Truck, Vacuum Trailer, Turbo-Vac, Roll-Off Truck and Hydro Vac. Project work may require out of town travel for two weeks or more Must be able to understand and comply with company and client safety standards. Due to the diversity of both scheduled and non-scheduled projects, physical demands, and environmental conditions vary significantly depending on the project. Work outside year round in all types of weather. May work in environments that are extreme in nature like environmental conditions such as heat, cold, heights, hazardous chemicals, loud noises, dangerous equipment, long hours etc. May be exposed to varying levels of physical activities and physical extremes such as long periods of standing, walking, crouching, use of hands, and heavy lifting of up to 50 pounds or more. Must be clean shaven at all times to allow immediate donning and seal of respirator. Qualifications Must be able to effectively operate a manual transmission. Qualifications: Requires High School Diploma or GED (or equivalent reading, writing and reasoning skills) and 2-3 years of experience operating vacuum trucks (or similar equipment). Additional experience in related work (emergency response, manual labor, industrial cleaning) is preferred. A valid Class “A” Commercial Driver’s License (CDL) with Hazmat and Tanker endorsements is required. Experience with construction equipment and heavy haul/end dump is required TWIC Preferred. OSHA 40-HR HAZWOPER and Confined Space Entry certifications are desired but not required. Successful completion of a pre-employment background and substance screening process including, but not limited to, employment verifications, criminal search and Motor Vehicle Record (MVR) search as well continued verifications throughout employment to ensure that all records meet company policy standards. Benefits Competitive Salary Health, Dental and Vision Insurance 401k with Company Match Paid Time Off (PTO) Paid Holidays Moran Environmental Recovery is an equal opportunity employer.

Find your next job here! Will train the right candidate! Average salaries from $18 - $32/Hr, full time and part time shifts available now! Hiring for: Owner Operator.

Davis Transfer, part of the USA Truck family, is now hiring CDL-A owner operator truck drivers for stable runs throughout the south and into the Midwest. Advantages for CDL-A Owner Operator Truck Drivers:.

CDL-A Owner Operator Truck Driver Opportunities Offer:. TForce Freight is seeking CDL-A owner operator truck drivers now! Get steady 100% no-touch freight, consistently high miles, and great discounts for fuel and tires. Join the industry’s most successful owner operator truck drivers by choosing

Find your next job here! Will train the right candidate! Average salaries from $18 - $36/Hr, full time and part time shifts available now! Hiring for: Warehouse Operator.

As a Data Entry Operator, you will be responsible for accurately inputting and managing data into our computer systems and databases. Enter and update data accurately and efficiently into the company's computer systems and databases. Proven experience as a Data Entry Operator or similar role,.

Job Description Clearsite Industrial Services is expanding and seeking professional Hydrovac Operators to join our business in Tampa, FL. Hydrovac Excavation is a non-destructive method of excavating as an alternative to mechanical equipment or hand-digging. Hydrovacs use pressurized water and a vacuum system to quickly, safely, precisely and cleanly excavate around utilities, pipelines and numerous other applications. MUST HAVE A MINIMUM CLASS “B” CDL LICENSE WITH TANKER ENDORSEMENT and CLEAN DRIVING RECORD. Key Responsibilities • Seventy percent or more of the job’s work time is spent operating the on-board hydro-vacuum system outside the truck performing non-destructive excavation around sensitive underground piping and cables., • Other Hydrovac work consists of cleaning and vacuuming, mobilization of equipment, truck maintenance, safety meetings, etc., • Heavy lifting at times is required., • Working at heights are sometimes required MUST HAVE A MINIMUM CLASS “B” CDL LICENSE WITH TANKER ENDORSEMENT and CLEAN DRIVING RECORD. • Minimum of 1 year driving experience with CDL, • Applicant shall agree to initial Drug/Alcohol testing and random testing thereafter, • OSHA10 safety card certification is required. (If applicant does not hold an OSHA10 certification, company will pay for computer based training with applicant completing on-line course within 5 days of hiring on their own. Certification is the property of the applicant.), • Possess a current and valid DOT medical certificate., • Criminal background check and safety performance verification will be conducted., • Clean MVR (2 or less traffic violations in current 3 year period)., • Safety mindedness is essential., • Travel out of town and out of state to work will be required at times., • Must be willing to work flexible hours. (Due to client schedule, our operators may not work every day but must be flexible for irregular hours)., • Underground utility experience a plus. Essential Job Functions: Drive and operate Hydrovac equipment in a safe and professional manner. • Properly document all Company, Federal, State, and Customer documentation/paperwork as required by law and or established policy in a clear and legible manner., • Able to effectively and professionally communicate with on-sight customer representative to locate least intrusive and safest place to park company equipment while on job sight., • Able to lead and direct subordinate personnel to perform duties/tasks in a safe, timely, and efficient manner., • Able to troubleshoot and as the need arises perform minor repairs to equipment. Essential Physical Functions/Requirements of the Job: Hear and distinguish emergency signals and instructions while on duty. Must be able to repetitively sit, lift, stoop, bend, squat, kneel, reach and crawl. * • Must be able to repeatedly lift a minimum of 50 pounds., • Must be able to work in all outdoor elements for extended periods of time., • Confined Space Entry may be required to accomplish tasks for some clients when applicable., • Be able to wear PPE (Personal Protective Equipment)., • Must be able to climb ladders, and work from stationary platforms from elevated heights., • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Retirement plan

Job Description "All candidates must be directly contracted by ASK Consulting on their payroll and cannot be subcontracted. We are unable to provide sponsorship at this moment". Job Title: Packaging Operator Location: Tampa, FL 33634, USA (100% ONSITE) Duration: 12 months contract Pay Rate: $18 to $20 on W2 Shift Timing: 1st Shift 7:00am - 3:30pm Mon-Fri Job Description: Packaging Operator - 1st Shift 7:00am - 3:30pm Mon-Fri Operates and tends machine that performs one or more packaging functions, such as filling, marking, labeling, tying, packing, or wrapping containers. 1-3 Years Experience Summary: • Execute assembly instructions per Batch Record requirements for Packaging and Labeling processes in compliance with cGMP guidelines. This will require on time and neat documentation during the execution to assure compliance., • Provide support to the Manufacturing Group, QA, Warehouse and Facility operations by complying with company and FDA cGMP requirements., • Responsible for the performance of cleaning of Primary and Secondary Packaging rooms and Packaging equipment. This will include the corresponding Room Sanitizations per Departments procedures. Key Accountabilities: • Follow batch record instructions in the execution of manual process for Primary and Secondary Packaging as applicable., • Assist in the operation and set-up of automated equipment in the performance of certain primary or secondary packaging operations., • Assist in the reconciliation and movement (Chain of custody) of materials between packaging areas and the warehouse., • Report any observations to QA, Team Lead, Equipment Specialist CPS Project Coordinator or Manager of potential issues that could result in deviation or investigation., • Perform Cleaning and Sanitization of Primary and Secondary Packaging rooms., • Support the Equipment Specialist in the execution of qualification protocols for new equipment as assigned., • Training on SOPs to remain current for job requirements, logbook entries and GMP documentation., • Attend applicable meetings, discussions, etc., in support of these projects to meet the Production Schedule., • Participate in safety processes and meetings as applicable., • Maintain a positive, professional and confidential relationship with sponsors. Comply with all state and federal regulatory requirements and guidelines., • Other applicable duties as assigned., • Adhere to all defined Safety and Sustainability requirements and expectations and seek clarification whenever Safety and Sustainability requirements and expectations are either unknown or unclear, • Promptly report identified Safety and Sustainability issues, problems, deficiencies, errors, incidents, and/or opportunities to management and correct where possible, • Stop work where deemed necessary to maintain safety About ASK: ASK Consulting is an award-winning technology and professional services recruiting firm servicing Fortune 500 organizations nationally. With 5 nationwide offices, two global delivery centers, and employees in 42 states-ASK Consulting connects people with amazing opportunities ASK Consulting is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all associates.

Job Description Position Summary: The Machine Operator receives instructions from the Operations Manager or the Team Lead pertaining to the assignments and expectations for the day. The Machine Operator will be trained on the machine or machines in the manufacturing area. The Machine Operator will be required to follow processes and procedures either posted or directed by management. Duties and Responsibilities: • Operates cutting machines, threading machines, headers, benders, and a variety of other manufacturing equipment, • Assures their assignments are completed on time, • Responsible for the quality checkpoints on each machine as posted, • Responsible for the safety and housekeeping of their area, • Completes paperwork according to the manager's instructions, • Uses forklifts to load and carry materials Education and Experience Required: • HS Diploma or GED Equivalent from an accredited institution, • Forklift Certification Preferred Education, Experience, and Skills: • Previous experience operating warehouse equipment, and successful completion of a forklift training program, • Ability to identify parts to be processed on their machine, • Effective written and verbal communication skills, • Strong organizational skills & Mathematical skills, • High level of accuracy and attention to detail, • Knowledgeable in TFI/OSHA Safety Requirements Physical Requirements: Qualified applicants must be able to perform the following physical job requirements, with or without reasonable accommodation: • Must be able to lift to 75 pounds 4+ hours per shift, • Must be able to work in hot, humid, and cold manufacturing environments, • Must be able to work in crowded spaces for 4+ hours per shift, • Must be able to bend and crawl for 4+ hours per shift, • Must be able to crouch, kneel, and stoop for 4+ hours per shift, • Must be able to climb ladders for 4+ hours per shift, • Must be able to sit, stand, and walk for 6+ hours per shift, • Must be able to perform simple grasping, push, pull, perform fine manipulation, and feel for 6+ hours per shift, • Must be able to operate foot pedals for 4+ hours per shift, • Must be able to make fine distinctions in sound, express, and exchange written or spoken words, and distinguish objects and equipment visually

Job Description Build your Career with an Industry Leader EMI Acquisition Company Inc. (dba: EMI Industries) creates custom fixtures, displays and food equipment for the nation’s premier grocery, retail and restaurant brands. With over 40 years of experience in metal, millwork and refrigeration displays, EMI Industries is a trusted partner in creating a unique customer experience. Headquartered in Cincinnati, LSI Industries (NASDAQ: LYTS) specializes in the creation of advanced lighting, graphics, and display solutions across strategic vertical markets. The company’s American-made products, which include lighting, print graphics, digital graphics, refrigerated and custom displays, aim to help businesses stand out in a competitive market. With a workforce of approximately 2,000 employees and 19 facilities throughout North America, LSI provides top-quality solutions for its clients. LSI’s management team is focused on continued profitable growth. As part of our #OneLSI movement: We are looking for a Press Brake Operator to support our team at our location in Tampa, FL. Position Overview: The Press Brake Operator is responsible for reviewing part drawings and setting up and operating 1 of 6 brake press machines. Entering in bend dimensions and bend deductions based on the different gages of sheet metal. A strong candidate will have good math skills having the ability to convert inches into decimals (for example: 3 ¼” = 3.25”) and having the ability to visualize a 3-dimensional part prior to bending a flat shape, similar to seeing a paper airplane in your head before folding the paper. Having experience operating a press brake is a plus. Overtime during busy months. Essential Job Functions: • Safety Sensitive position., • Set up and operate machines such as brakes, rolls, sheers, saws, and presses., • Read and interpret blueprints, part drawings and engineering specifications., • Performing mathematical calculations., • Learning the controller on the brake press and adjusting bend programs when needed., • Lifting metal parts that could weigh as much as 50lbs., • Make minor repairs and adjustments to machines and notifies supervisor when major service is required., • Maintain cleanliness in assigned area and all safety standards., • Support other departments as necessary., • Perform additional assignments in accordance with the Shop Supervisor’s direction., • Knowledge of machines and tools, including their design, use, and maintenance., • Excellent time management skills., • Excellent verbal and written communication., • Good organizational skills., • Proficient basic math skills., • Ability to work in a demanding, multi-task environment., • High School Diploma or G.E.D., • Trained in lockout/tagout (LOTO)., • Demonstrate hands-on shop floor experience in both metal and wood manufacturing., • 401(k), • Health insurance, • Dental insurance, • Vision insurance EMI Industries, an LSI company, is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth, pregnancy-related conditions, and lactation), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. Note: This job description is not intended to be an exhaustive list of all duties, responsibilities or qualifications associated with the job. Duties, responsibilities, and activities may change at any time with or without notice. Pay may be based on location. Offers will be adjusted based on an individual’s experience, education, and other job-related factors as permitted by law. This description does not alter the at-will status of employment.