Operator jobs in Jacksonville, FloridaCrear alertas

Job Description Summary Responsible for the safe, orderly, and expeditious flow of air traffic control duties in a Visual Flight Rules (VFR) Air Traffic Control Tower. Dimensions of Position Works under the general supervision of the Tower Manager who relies on the incumbent to perform established duties independently. On new or revised procedures, the manager gives detailed instructions and observes, and checks work during or immediately after completion according to complexity of the task or until satisfied the incumbent can perform it independently. Accountability 1. Makes decisions involving: • The order of departures that will assure all aircraft equitable treatment and will assure that departing IFR flights operate at the fix, altitude, and the time designated by the center or approach control clearances., • The times and direction of takeoff and any turns necessary for departure., • Whether inbound aircraft are to land immediately or circle and whether distances are lengthened to control the arrival of an aircraft at a given point., • The active runway and possible simultaneous use of other runways., • The time and methods by which arrivals and departures can be interspersed with the least delay to traffic., • When landing and departing aircraft are cleared to use the runways to assure standard separation between aircraft on the runways., • The sequence of arriving traffic, before it enters the traffic pattern, to assure a safe, orderly flow of aircraft on final approach to the landing runway., • The sequence of VFR and IFR traffic, using radar equipment as an aid and, when delegated, separating IFR traffic., • When VFR flights through the airport traffic area can be authorized. 2. Determines the usability of communications frequencies available to him/her as other navigational aids used to control air traffic. Monitors navigational aids and monitors control panels, including BRITE display to determine acceptability of its alignment and display presentation. Instructs pilots to change radio frequencies/radar beacon codes., 3. When appropriate, coordinates with the other controllers on movements of both arrival and departure aircraft., 4. When traffic conditions warrant, controllers in non-approach terminals are responsible for: • Preplanning traffic sequencing and separation over an area which may reach out to a radius of 5 miles or more., • Preplanning and setting up check points required to ensure the maintenance of necessary traffic separation., • Maintaining a continuous mental picture and evaluation of a constantly changing traffic complex frequency dispersed over an equivalent geographic area., • Maintaining continuous radio watch with aircraft which have previously contacted the facility., • Accepting responsibility to handle IFR traffic at his/her airport. 5. Studies weather bureau reports and forecasts, obtains LAWRS/SAWRS weather certification, observes weather from the tower and records pilot reports to determine the effect of present and anticipated weather on traffic; furnishes aircraft with information such as field conditions, altimeter settings, weather conditions, operating status of navigational aids, and observed malfunctioning of aircraft, forwards to the weather bureau and the appropriate center, pilot weather reports and reports based upon personal observation of weather conditions; operates light guns, runway lights, field lighting, jet barriers etc., 6. Orients pilots of aircraft lost or in difficulty; determines whether a given situation may operations offices, airport management offices, and fire and ambulance services., 7. Performs lower grade level duties as necessary to meet operational requirements and for proficiency maintenance., 8. Provides OJT training to others. Requirements Individual must have a CTO Certificate and a current Class II Medical Certificate. Position is subject to drug and/or alcohol testing per the DOT/FAA requirements (pre-employment, random, reasonable cause/suspicion, post-accident). Individual must have held a Control Tower Operator Certificate (CTO) with a facility rating or have held an FAA Credential with a tower rating, for a minimum of six months in an Air Traffic Control Tower.

Job Description If you are one of the best, come work for the best! Speedy Concrete Cutting – The best trucks, the best equipment, the best people, and the best workplace in the industry. Speedy Concrete Cutting Inc. is the premier concrete sawing and drilling contractor for the Southeast U.S., and we are currently hiring experienced operators to join our team of industry-leading professionals! PLEASE COPY THIS LINK AND APPLY ON OUR WEBSITE: Professional Operators with a Class A CDL will average 50-55 hours/week. Qualifications: * Minimum 2 years as a professional Bobcat type skid steer loader/equipment operator * VALID CLASS A CDL driver’s license * Safety-minded * HEAVY LIFTING ability (for concrete hand-removal) Benefits: * NEW Mack Granite dump trucks * AIR CONDITIONED Bobcat skid steer loaders and drive on tandem axle trailers * Excellent health benefits including dental, vision and life insurances * 401K retirement match * Short and long term disability insurance * Safety and Holiday bonuses * Job security & full time hours * The best company culture in the business! Related Skills and Tooling: Skid Steer Front End Loaders, Rubber Tire Loaders, Excavators, Combination Loaders, Hydraulic Concrete Breakers and Concrete Removal, Tandem Axle Dump Trucks and Low Boy/Drive on Trailers. We are a Drug-Free Workplace. Find out more at

Job Description Lycamobile is seeking a talented Account Executive(Outside Sales) to join their Sales Team in Jacksonville, FL The individual will report to the Team Lead, Area Sales Manager or Regional Sales Manager. This position might be remote with a weekly commute to the Jacksonville, FL area Position: The position is responsible for driving sales performance and related metrics of the associated territory to maximize company revenue. This is an outside sales position. The Account Executive is accountable for all activities contributing to the success of Retailers in his/her area of responsibility, including but not limited to: sales volume, dealer inventory levels, training, relationship building, merchandising, small business consulting, and brand advocacy in a retail environment. Through the Account Executive’s effort in reinforcing, the goal is to grown the customer activation and replenish activities of the Retailers who are: actively promoting Lycamobile, sufficiently inventoried, properly merchandised, knowledgeable of Lycamobile products and services, and selling Lycamobile as a primary brand in the store’s portfolio. These Retailers are both Independent and National. Responsibilities: · Drive company revenue · Increase customer’s activations (sales by dealer to customers) in the assigned territory · Grow the distribution and ensure the Retailers have an adequate supply of stock & merchandising/marketing materials · Educate and train Retailers on service offerings, systems and processes · Maintain and build relationships with store personnel · Improve the customer experience within the retail environments · Report daily activity, store level conditions, trends, and competitive data · Provide feedback on Retailer and consumer interactions · Develop, implement, and maintain a business plan for the designated region, driving measurable results for stores · Conduct store visits and phone call within region · Continue to expand sales through establishing and maintaining Retailer contacts through potential new Retailer leads that they see while out in the field or by getting referrals from existing Retailers · Strengthen brand awareness in the channel through merchandising, display maintenance · Must take measurements for custom Branding requests Skills and Requirements: · At least 2-5 years wireless retail sales or training experience (strongly preferred) · High school diploma or equivalent · Any combination of education and experience · Highly self-motivated and independent team player · Prior success meeting performance goals and requirements (prepaid wireless industry experience preferred) · Ability to take initiative and problem solve · Attention to detail and ability to multitask · Strong organizational skills with ability to coordinate and direct projects · Excellent verbal, written and presentation skills · Proficient in Microsoft Office, including Excel, Outlook, Word and PowerPoint · Ability to work non-traditional hours to participate in evening and weekend events · Valid driver’s license (at least 2 years in the US) · Bi-lingual Spanish preferred Company DescriptionAbout Lycamobile: The world’s largest international mobile virtual network operator with over 16 million customers with a new customer joining every two seconds. Lycamobile’s mission is to connect friends and family around the world. We aim to do this by offering low-cost, high-quality data and voice services across 24 countries. Lycatel LLC is an equal opportunity employer. We will not discriminate on the basis of race, color, gender, national origin, age, religion, creed, disability, veteran’s status, sexual orientation, gender identity or gender expression.About Lycamobile:\r\n\r\nThe world’s largest international mobile virtual network operator with over 16 million customers with a new customer joining every two seconds. Lycamobile’s mission is to connect friends and family around the world. We aim to do this by offering low-cost, high-quality data and voice services across 24 countries.\r\n\r\nLycatel LLC is an equal opportunity employer. We will not discriminate on the basis of race, color, gender, national origin, age, religion, creed, disability, veteran’s status, sexual orientation, gender identity or gender expression.

Job Description POSITION SUMMARY: The Customer Care Coordinator serves as the first line of support for all inquiries via phone and email for the Girl Scouts of Gateway Council. This position is responsible for providing the highest level of customer service to all members and customers, both external and internal. A significant portion of this role uses a database to maintain accurate customer records, complete detailed technical processes, and provide support to customers. A desire to consistently provide positive and impactful interactions with customers is required. The Customer Care Coordinator works collaboratively with teams across the council to ensure the success of the council’s goals and objectives. Essential Duties and Responsibilities: • Maintains a customer-centric environment in all interactions by answering inquiries, clarifying needs, researching information and delivering timely, accurate responses., • Provides in-office customer service support at the front desk and retail shop two days per week., • Accurately processes membership registrations and renewals, cookie program access, event registrations and cancellations, retail sales and supports financial assistance requests., • Monthly data clean up completed as designated by GSUSA’s monthly/quarterly data quality dashboard as assigned., • Provides support for additional seasons and projects throughout the membership year. Including but not limited to expert knowledge of product program technology platforms, support for ongoing data cleanup projects, gsEvents registration platform, gsLearn training platform, knowledge article management, background check management, and seasonal phone campaigns., • Follows standard operating procedures for consistent data entry in all member accounts. Adheres to internal documented processes to ensure data quality., • Engages in daily problem-solving and provides solutions by accessing all available resources., • Manages the primary council case queue serving as Tier 1 case and phone management support for all inbound inquiries and manages the escalation of Tier 2+ cases to appropriate subject matter experts., • May be designated to take specific projects or duties as assigned by COO., • Keeps current on organizational knowledge and best practices by participating in Gateway staff training, volunteer training, GSUSA webinars and chatter groups, professional development via gsLearn, and utilizing gsConnect., • Enhances the organization’s reputation by providing positive and timely customer experience and ensuring a strong and effective volunteer support system for every member., • Active participation in the development of environments that foster diversity, equity, inclusion, and access through words, actions, and attitude., • Excellent communication skills and the ability to build relationships and work with individuals of diverse backgrounds and ages., • Strong communication and presentation skills that attract, and appeal to, diverse audiences., • Superior time management skills to maximize productivity, and adherence to performance goals., • Willingness to promote visibility and credibility of Girl Scouting in the community, within compliance with our brand standards., • Understanding and acceptance of the Girl Scout promise, law, beliefs, and principles, • Ability to work independently with minimal oversight, take initiative, and effectively monitor process hand-off to other departments., • Ability to work a flexible schedule including evenings and weekends., • Travel throughout council jurisdiction up to 10% of the time., • Associate degree or higher or two years of customer service experience., • The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee must be able to withstand:, • Prolonged periods sitting at a desk and working on a computer., • Operate office equipment manually., • Effective Communications, • Work Quality, • Knowledge, • Adaptability Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Job Description Kitchen Operations Manager / Store Operations Leader Due to rapid growth, we are seeking an exceptional Kitchen Operations Manager to join our team of high-performing leaders. This role is critical to the success of our market-leading restaurant and is ideal for someone who is passionate about service, hospitality, and developing people. As a Kitchen Operations Manager, you will oversee daily kitchen operations while working closely with the franchise operator and leadership team to drive excellence in quality, efficiency, and team culture. You will be trained to high standards of food quality and hospitality and will play a key role in shaping the future of our restaurant. Flexible availability is required. Early mornings, evenings, nights, Saturdays, and many major holidays are expected. Key Responsibilities • Oversee and manage daily kitchen operations to ensure efficient, timely, and high-quality food production., • Supervise, motivate, and lead kitchen staff; assign duties and hold team members accountable to established standards., • Monitor food quality, presentation, taste, temperature, and safety to consistently meet or exceed expectations., • Ensure proper use of kitchen equipment and strict adherence to health, safety, and food safety regulations., • Track and document food waste, spoilage, loss, and donations., • Collaborate with a team of high-performing leaders to manage and improve overall restaurant operations. Leadership & Development • Develop and implement processes and procedures that improve efficiency, quality, and safety., • Train new kitchen team members and provide ongoing coaching and development for existing staff., • Foster a culture of care, service, and hospitality aligned with our mission, vision, and core values., • Work closely with the franchise operator to grow leadership skills and advance operational expertise., • Promote teamwork, accountability, and a positive attitude while creating a fun, supportive work environment. Qualifications • Minimum of 5 years leading a high-performing team, preferably in a high-volume restaurant or hospitality environment., • Strong communication, leadership, and interpersonal skills., • Demonstrated strong work ethic and commitment to high performance., • Ability to stand for extended periods and lift up to 50 pounds., • Authorized to work in the United States., • Knowledge of food preparation, kitchen equipment, and safety regulations preferred but not required. Compensation & Benefits • Salary range: $58,000–$65,000, with growth opportunities up to $75,000+ plus bonuses, • 401(k), • Paid Time Off, • Scholarship opportunities, • Sundays off, • Complimentary meal every shift, • Insurance options available, • Employer-sponsored food safety coursesCompany DescriptionChick-fil-A is a restaurant chain based on excellent service and quality food. It is a fast paced environment where candidates must be able to balance performance with a great attitude.Chick-fil-A is a restaurant chain based on excellent service and quality food. It is a fast paced environment where candidates must be able to balance performance with a great attitude.

Job DescriptionPosition SummaryThe Membership Growth Coordinator supports the council’s recruitment and retention goals by engaging directly with families, schools, and community partners. This role focuses on lead generation, event delivery, and customer service. The Membership Growth Coordinator is the front-line driver of new member acquisition and provides critical support to ensure a positive experience for families joining Girl Scouts. The Membership Growth Coordinator works closely with the membership team to ensure increased girl and adult participation in Girl Scouts within an assigned area that results in the achievement of membership growth targets. Essential Duties and Responsibilities • Execute recruitment event and membership growth strategies that are engaging, welcoming, reflective of Girl Scout programming, informative, and result in successful girl and adult membership increases in designated areas., • Coordinate and attend community events, school presentations, and key membership recruitment drives., • Support troop formation meetings and events by coordinating logistics, communicating with interested caregivers and volunteers, and assisting with the presentation of Girl Scout program information., • Provide excellent customer service to community partners, families and volunteers during the membership registration process and promote the Girl Scout brand and mission consistently in all community interactions., • Track recruitment activity, event outcomes, and membership data accurately in CRM/database systems., • Follow up with prospective members to ensure timely placement into troops or other Girl Scout experiences., • Utilizes the volunteer systems database to track and follow through with leads and prospects to achieve the desired conversion rate and meet the assigned girl and adult membership goals., • Assists and provides support for potential, new, and existing members on how to access and navigate Girl Scout technology platforms., • Develops and applies a high level of understanding and awareness of GSGC business operations, goals, priorities, and other relevant information to effectively navigate potential, new, and existing member inquiries and requests. Recommended Skills, Education, and Experience, • Associate degree or higher, or relevant work experience., • 2+ year of previous experience in customer service, sales, program delivery, community engagement. or a related field., • Proficient in Salesforce CRM and Microsoft Suite platforms, including Teams, Outlook, PowerPoint, and Excel., • Strong communication skills in written, verbal, and virtual delivery; experience developing and implementing action plans to meet/exceed deliverables; and experience working collaboratively to reach collective goals., • Comfort with public speaking and event facilitation., • Ability to work a flexible schedule including frequent evenings and weekends., • Travel throughout council jurisdiction up to 50% of the time., • Capability to provide own transportation and maintain valid operator license. Physical RequirementsThe physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this position. The employee must be able to:, • Travel frequently within assigned communities, including regular driving to meetings, events, and partner sites., • Stand, walk, and move for extended periods during presentations, events, and community activities., • Lift, carry, and transport materials and equipment up to 25 pounds., • Use standard office equipment and technology to complete administrative and communication tasks. Core Competencies, • Communication and Presentation, • Community Engagement and Visibility, • Cross-Functional Collaboration, • Customer Service and Support, • Innovation and Adaptability, • Member Engagement and Recruitment, • Mission Alignment and Brand Stewardship, • Problem Solving and Critical Thinking, • Program and Event Execution, • Time and Priority Management *Registration as a member of Girl Scouts of Gateway Council required

Job Description Cherry Picker: is responsible for safely and efficiently operating a powered industrial truck (cherry picker) to retrieve and move products within a high-bay warehouse environment. This role plays a key part in the order fulfillment process by accurately picking inventory from elevated storage locations and ensuring timely delivery to packing or shipping areas. Key Responsibilities: * Operate a cherry picker forklift to access and retrieve items from elevated racks. * Pick and stage products based on order specifications using handheld scanners or pick sheets. * Inspect and maintain equipment to ensure safe operation. * Adhere to safety protocols and warehouse procedures at all times. * Assist with inventory counts and stock replenishment as needed. * Collaborate with warehouse staff to meet daily productivity and accuracy goals. Qualifications: * Prior experience operating a cherry picker or similar equipment (certification may be required). * Ability to lift and move heavy items (often 50+ lbs). * Comfortable working at heights and in fast-paced environments. * Attention to detail and commitment to safety. * Basic math and reading skills for order processing. Reach Truck Operator: is responsible for safely operating a reach truck (a type of forklift) to move, locate, stack, and count merchandise within a distribution warehouse. This role is crucial in maintaining efficient inventory flow, ensuring accuracy in order fulfillment, and supporting overall warehouse operations. Key Responsibilities: * Operate a reach truck to transport products to and from storage areas, racks, and loading docks. * Pick, stage, and put away goods according to inventory management systems and company procedures. * Perform inventory checks and verify product accuracy using scanners or paperwork. * Maintain cleanliness and safety standards in the warehouse. * Conduct daily equipment inspections and report mechanical issues or safety concerns. * Support shipping and receiving tasks as needed. Skills and Qualifications: * Proven experience operating a reach truck or similar powered industrial trucks. * Valid forklift certification (if required by the employer or jurisdiction). * Familiarity with warehouse management systems (WMS) and handheld scanners. * Strong attention to detail and organizational skills. * Ability to lift heavy items, follow safety procedures, and work in a fast-paced environment. Work Environment: * Typically involves standing for long periods, working in varying temperatures, and operating in high rack storage areas. * May include shift work, overtime, and weekend hours depending on warehouse demand.

Job Description Wholesaler of access control and security equipment is looking for someone with The Right Stuff. We are seeking a technician join our Jacksonville team! You will resolve customer questions and offer solutions from our high-volume warehouse inventory. We only sell B2B. Great personality, attention to detail and low voltage experience preferred. Gate operator installation experience a plus. Responsibilities: • Present and sell company products to new and existing customers, • Shipping and receiving including deliveries to customers, • Previous experience in sales, customer service, and inventory management, • Low voltage experience from installations or bench work, • Ability to build rapport with clients, • Deadline and detail-oriented, • Forklift operator, • Good driving recordCompany DescriptionAccess control and security equipment wholesaler with warehouses in Orlando, Atlanta and Jacksonville with 35 years of experience providing the best service in the industry.Access control and security equipment wholesaler with warehouses in Orlando, Atlanta and Jacksonville with 35 years of experience providing the best service in the industry.

Job Description Machine Operator- Metal Fabrication Job Description We are seeking a Fabrication Helper to join our dynamic metal fabrication department in our manufacturing facility. You will be tasked with operating a variety of metal fabrication machinery including CNC press brake, CNC turret press, CNC shear, and CNC punch press. Your daily duties include bending, shaping, punching, and cutting metal to specifications, as well as reading blueprints and a tape measure. You will be responsible for loading and unloading your machine by hand. You will be working independently on the machine, so a high level of responsibility and ownership is required. Job Overview: • Job title: Metal Fabrication / Helper, • Pay: $17.50-22.00/hr (based on shift/skills), • Shift Options: 1st, 2nd and 3rd shifts available, • Manufacturing environment (non-climate controlled), • Machine operation experience is required, • Ability to read tape measure is required, • Proficiency using computers, • Experience operating CNC machinery is preferred, • Experience working with metal fabrication machinery is a plus, • Ability to lift 50+ pounds This is a contract-to-hire position (90 days) with benefits offered while on contract. Company has the following benefits once permanent: • Free Employee Benefits (Medical, Vision, Dental), • 10 Paid Holidays, • Quarterly Profit Sharing Bonuses, • Safety Shoes Stipend Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jacksonville,FL. Application Deadline This position is anticipated to close on Jan 23, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Warehouse Van Driver / Associate Shift: 7:30am-4pm Mon-Fri Pay: $18/hr Location: Westside Jacksonville FL (32254) Contract-to-hire Job Description The Warehouse Delivery Driver / Forklift Operator is responsible for driving a company commercial van to make deliveries within a 30‑mile radius of the Jacksonville area while also supporting warehouse operations. This role is split between driving and warehouse work, with approximately 60–70% of time spent making customer deliveries and 30–40% working in the warehouse. The delivery vehicle operated will be a Ford F‑350 Transit van (Non‑CDL). When working in the warehouse, the employee will operate forklifts, pull orders, and complete put‑aways while supporting overall warehouse production. Key Responsibilities • Drive a company Ford F‑350 Transit commercial van to deliver materials to customers within the Jacksonville area, • Load, secure, and unload materials safely and efficiently, • Operate sit‑down forklifts and stand‑up reach forklifts, • Pull orders accurately and complete warehouse put‑aways, • Assist with inventory counts and material organization, • Support daily warehouse production and workflow, • Provide professional customer service during deliveries, • Follow all safety policies and company proceduresRequired Skills, • Forklift operation, • Commercial van driving, • Warehouse production, • Customer service, • Inventory countingTop Skills Details, • Forklift, • Delivery Driving, • Warehouse productionQualifications, • Prior warehouse and forklift operating experience, • Intermediate‑level experience in warehouse or delivery operations, • Valid driver’s license with a clean driving record, • Ability to lift up to 50 lbs and perform physical labor, • Ability to work independently and as part of a team This is a Contract position based out of Jacksonville, FL. Pay and Benefits The pay range for this position is $18.00 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jacksonville,FL. Application Deadline This position is anticipated to close on Jan 21, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Pioneer is Now Hiring CDL-A Company Flatbed Drivers! \n$5,000 Sign-On Bonus - Average Up to $1,800 Weekly Gross \nMostly Home Weekly - Full Healthcare Benefits \n\n Top Company Flatbed Driver Benefits: \n\n\n\t • Top drivers earn up to $90,000 per year\n\t, • Average $1,500 - $1,800 weekly gross pay\n\t, • Average $1,200 - $1,500 weekly net pay\n\t, • Home weekly or bi-weekly\n\t, • We strive to get our drivers home on weekends\n\t, • $5,000 sign-on bonus\n\t, • $3,000 referral bonus\n\t, • Valid Class A CDL\n\t, • Lease Operators average $4,000 - $5,000 per week*\n\t, • Home weekends\n\t, • $5,000 sign-on bonus\n\t, • $3,000 referral bonus\n\t, • All expenses paid orientation\n\t, • 77% of line haul for Tractor and Trailer\n\t, • 100% of fuel surcharge paid to owner\n\t, • Newer equipment - 2021-2025 Freightliners and International's\n\t, • Holiday pay eligible after 180 days of employment\n\t, • Single dispatcher for each driver\n\t, • Free rider & pet programs\n\t, • Training programs available!\n\t, • Detention pay\n\t, • Direct Deposit, paid out every Friday\n\t, • STEP ONE: Request info by submitting this form\n\t, • STEP TWO: Complete the Pioneer application (provided upon completion of STEP ONE and takes 10-15 min)\n\t

Job Description • We are hiring immediately for a FULL TIME WAREHOUSE FORKLIFT OPERATOR position., • Location: Duval County Public Schools - 3405 Norman East Thagard Boulevard, Jacksonville, FL 32254. Note: online applications accepted only., • Schedule: Full time schedule. Monday through Friday, hours may vary; more details upon interview., • Requirement: Previous forklift experience is required. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1480805. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Chartwells K12's goal is to make sure students leave the cafeteria happier and healthier than they came in, by serving food kids love to eat and creating custom dining programs. With more than 16,000 associates in 4,300 schools, ranging from large public institutions to small charter and private schools, Chartwells K12 is built on decades of food, education and operational experience driven by top culinary, nutrition, wellness, and sustainability talent. For more information, visit . Job Summary Summary: Performs functions in warehouse involving receiving, picking, pulling and loading of materials in a safe manner. Drives company vehicle to transport products, supplies, mail and cash to and from specified destinations. Essential Duties and Responsibilities: • Withdraws merchandise and supplies from the warehouse., • Verifies load against products ordered; prepares delivery tickets or shipping papers when applicable., • Loads products, supplies, mail and cash onto vehicle; drives to designated locations; unloads truck, and distributes delivered items as instructed; picks up product, supplies and cash funds to be returned to branch or designated location; obtains and approves receipts or delivery slips; returns to warehouse and unloads vehicle distributing items as directed., • Collects empty containers and unsold merchandise for return to warehouse and/or disposal., • Monitors product usage; makes adjustments to control inventory turns., • Ensures proper handling of perishable products; maintains refrigeration of food and beverages., • Maintains security of cash and property by locking unattended vehicle, securing funds in a locked safe, and securing keys and vehicle at end of shift., • Unloads and cleans trash from vehicle; performs daily vehicle operative checks; maintains truck log according to state and federal regulations; reports vehicle problems; secures keys and vehicle., • Performs the job safely while adhering to company safety standards., • Performs other duties as assigned. Qualifications: • Must have experience with forklift and power jacks. Valid driver's license required based on vehicle to be used according to state or federal requirements. Associates at Chartwells K-12 are offered many fantastic benefits. Both full-time and part-time positions offer the following benefits to associates: • Retirement Plan, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Medical, • Dental, • Vision, • Life Insurance/AD, • Disability Insurance, • Commuter Benefits, • Employee Assistance Program About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Chartwells K-12 maintains a drug-free workplace.

Job Description Priority Tire Job Title: Reach Truck Operator Department: Receiving Reports To: Receiving Lead / Operations Supervisor Location: Jacksonville, Florida Position Overview The Reach Truck Operator will safely and efficiently operate a reach truck to put away, consolidate, and reorganize large metal stackable racks in our high-volume Jacksonville warehouse. This role is critical to maintaining a consistent product flow and ensuring our racking system remains organized by brand and operational priority. Key Responsibilities • Primary Task: Operate a reach truck to put away large metal stackable racks from the receiving floor and reorganize warehouse racking to optimize flow and brand organization., • Use RF scanners and the warehouse management system (WMS) to accurately record bin moves, transfers, and inventory put-aways., • Support receiving operations by consolidating racks and maintaining accurate placement of inventory., • Safely operate a stock picker to assist with consolidation tasks and move product as needed., • Assist with unloading inbound containers or trailers on an as-needed basis., • Provide cross-departmental support-including shipping, inventory, and tire dispatch-when operational demands require., • Conduct daily equipment inspections and maintain accurate equipment logs in accordance with OSHA and company safety standards., • Experience: Minimum of two (2) years operating a reach truck in a high-volume warehouse environment required., • Strong knowledge of large racking systems and experience with rack consolidation preferred., • RF scanning and WMS proficiency required for accurate put-away, transfers, and inventory movement., • Ability to operate a stock picker and other warehouse equipment (reach truck, EPJ, etc.) is highly desirable., • Demonstrated commitment to workplace safety and adherence to OSHA guidelines., • Ability to lift and maneuver tires and racks of varying weights as needed., • Standard Hours: Monday–Friday, 7:00 AM – 3:30 PM, or until daily workload is completed., • Regularly lift and move materials weighing up to 50 lbs., • Stand, walk, bend, and climb throughout the shift., • Work in a non-climate-controlled warehouse environment. Note to Candidates: Priority Tire is committed to a culture of safety, accountability, and continuous improvement. We offer competitive pay, benefits, and opportunities for growth within our expanding national operation.

Job Description Responsibilities include but are not limited to: • Perform entry-level lumberyard duties, housekeeping duties, including the use of a shovel, etc., • Stack various lengths of lumber, • Maintaining safe work areas, collecting debris, and disposing of sawdust and dropped lumber in assigned areas, • Cleaning industrial equipment and workstations, • Relieving production positions; operating various light and heavy industrial machinery, • Showing a willingness and flexibility to perform various job assignments that may change daily, • Supporting our culture of safety by adhering to mill safety policies and procedures at all times, • Follow all Safe Work Procedures, • Follow all Zero Energy State procedures Required skills and experience include: • Willing to work any shift, • High School Diploma or GED, • Good written and oral communication skills, • Ability to work outdoors in all temperatures in loud, high volume environments performing physical tasks throughout the shift, • Ability to perform the essential functions of the position which includes walking, standing, sitting, climbing stairs, bending and lifting up to 50 pounds, • Ability to perform all tasks in accordance with West Fraser safety policies and procedures, • Recognize and support our team culture, communicating effectively with all team members, • Ability to work rotating shifts, holidays, and weekends, • Offers of employment are contingent upon successful completion of a pre-employment background check, drug screen test, and physical Preferred Skills: • Minimum of six (6) months in a manufacturing or industrial environment Our highly competitive compensation package and outstanding benefits include: • Benefits start Day 1, • Competitive starting pay, • Wellness Pay Program, • On-the-job training and a, • A culture that strongly believes in promoting from within, • Medical, Dental, Vision, Rx Insurance, • 401k with company match, • Life Insurance, • Disability Insurance, • Paid vacations and holidays Safety is one of West Fraser’s core values and our employees can expect a challenging, stable work environment with career development opportunities. Apply with us: If you are ready to build your career in a company that thrives on growth, a safe work environment, rewarding work, challenge, and opportunity, come build your career with us and APPLY at West Fraser: We thank all candidates for their interest; however, only those selected for an interview will be contacted. Please apply through our online application process as resumes will not be accepted at the site. No phone inquiries, please. Please attach your resume to your online profile. West Fraser is a diversified wood products company producing lumber, OSB, LVL, MDF, plywood, pulp, newsprint, wood chips, and energy with over 50 facilities in Canada, the United States, and Europe. We are the largest lumber producer in North America, a leading global manufacturer of wood-based panels, and the world’s largest producer of oriented strand board (OSB). We are a growing company, believe strongly in promoting from within, and pride ourselves on providing a challenging environment with continuous development. The successful candidate should be interested in future growth opportunities within the company. West Fraser is an Equal Opportunity Employer M/F/V/D & Drug-Free Workplace

What is Uber? Driving with Uber is an alternative to a part-time or full-time job and can get you earning cash on the road quickly. Driving with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary) Why Drive With Uber?: * Receive your earnings fast: With Uber, you can cash out your earnings up to 5 times a day with Instant Pay. * You are your own boss: You decide how much or little you want to drive and earn. * Don’t have a car? Uber has rental partners available that allow you to rent a car by the hour, day, or week. * Signing up only takes a few minutes: We'll provide support along the way and get you on the road as soon as your registration is processed. Requirements to Drive: * Meet the minimum age to drive in your city * Have at least one year of licensed driving experience in the US (3 years if you are under 25 years old) * Use an eligible 4-door vehicle * You consent to driver screening and background check * You have an iPhone or Android smartphone * Vehicle Requirements vary by region, we’ll show you what is needed Additional Information: If you have previous employment experience in transportation (such as a delivery driver, driver, professional driver, driving job, truck driver, heavy and tractor-trailer driver, cdl truck driver, class a or class b driver, local truck driver, company truck driver, taxi driver, taxi chauffeur, cab driver, cab chauffeur, taxi cab driver, transit bus driver, bus driver, coach bus driver, bus operator, shuttle driver, bus chauffeur) you might also consider driving with Uber to earn extra money. We also welcome drivers who have worked with other peer-to-peer ridesharing or driving networks. Drivers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. No professional driving experience required. Driving with Uber is a great way to supplement your part time or full time income. Additional Documents to Drive * A valid US Driver’s license * Proof of residency in your city, state, or province * Proof of vehicle insurance if you plan to drive your own vehicle *Depending on your city or state, additional documentation or information may be required. Our support team is available 24/7 to help you answer any questions you may have about registration.

What is Uber? Driving with Uber is an alternative to a part-time or full-time job and can get you earning cash on the road quickly. Driving with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary) Why Drive With Uber?: * Receive your earnings fast: With Uber, you can cash out your earnings up to 5 times a day with Instant Pay. * You are your own boss: You decide how much or little you want to drive and earn. * Don’t have a car? Uber has rental partners available that allow you to rent a car by the hour, day, or week. * Signing up only takes a few minutes: We'll provide support along the way and get you on the road as soon as your registration is processed. Requirements to Drive: * Meet the minimum age to drive in your city * Have at least one year of licensed driving experience in the US (3 years if you are under 25 years old) * Use an eligible 4-door vehicle * You consent to driver screening and background check * You have an iPhone or Android smartphone * Vehicle Requirements vary by region, we’ll show you what is needed Additional Information: If you have previous employment experience in transportation (such as a delivery driver, driver, professional driver, driving job, truck driver, heavy and tractor-trailer driver, cdl truck driver, class a or class b driver, local truck driver, company truck driver, taxi driver, taxi chauffeur, cab driver, cab chauffeur, taxi cab driver, transit bus driver, bus driver, coach bus driver, bus operator, shuttle driver, bus chauffeur) you might also consider driving with Uber to earn extra money. We also welcome drivers who have worked with other peer-to-peer ridesharing or driving networks. Drivers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. No professional driving experience required. Driving with Uber is a great way to supplement your part time or full time income. Additional Documents to Drive * A valid US Driver’s license * Proof of residency in your city, state, or province * Proof of vehicle insurance if you plan to drive your own vehicle *Depending on your city or state, additional documentation or information may be required. Our support team is available 24/7 to help you answer any questions you may have about registration.

Earn at least $1365 driving with Uber when you complete your first 120 trips in 30 days. Why Uber? Driving is an easy way to boost your income while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary). What you need to know: * Signup in seconds: Get started today and we’ll provide support along the way. * Get paid fast: Cash out up to 5X a day with Uber’s Instant Pay. * Guaranteed earnings: Earnings guaranteed for your first 120 trips with Uber. * Flexible schedule: You control when and where you drive. * 24/7 support: The app gives you turn-by-turn directions, and access 24/7 support if you need help. What you need to get started: * 21 years old or older * A 4-door vehicle * A valid U.S. driver’s license and vehicle insurance * At least one year of driving experience in the U.S. (3 years if you’re under 23 years old) Additional Information: If you have previous employment experience in transportation (such as a delivery driver, driver, professional driver, driving job, truck driver, heavy and tractor-trailer driver, cdl truck driver, class a or class b driver, local truck driver, company truck driver, taxi driver, taxi chauffeur, cab driver, cab chauffeur, taxi cab driver, transit bus driver, bus driver, coach bus driver, bus operator, shuttle driver, bus chauffeur) you might also consider driving with Uber and earn extra money. We also welcome drivers who have worked with other peer-to-peer ridesharing or driving networks. Drivers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. Driving with Uber is a great way to supplement your part time or full time income. Uber welcomes applicants year round - summer, winter, fall, spring, and holiday. Sign up to drive with Uber and earn $1365*—if not more—when you complete 120 trips in your first 30 days. Terms apply. *This is a promotional offer and is only available to new drivers who have never previously signed up to drive or deliver with Uber; and complete the minimum trip threshold in their city within 30 days of signing up to drive. Any tips and promotions you make are on top of this amount. Limited time only. Offer and terms are subject to change. Click through to read full terms and conditions.

Earn at least $1365 driving with Uber when you complete your first 120 trips in 30 days. Why Uber? Driving is an easy way to boost your income while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary). What you need to know: * Signup in seconds: Get started today and we’ll provide support along the way. * Get paid fast: Cash out up to 5X a day with Uber’s Instant Pay. * Guaranteed earnings: Earnings guaranteed for your first 120 trips with Uber. * Flexible schedule: You control when and where you drive. * 24/7 support: The app gives you turn-by-turn directions, and access 24/7 support if you need help. What you need to get started: * 21 years old or older * A 4-door vehicle * A valid U.S. driver’s license and vehicle insurance * At least one year of driving experience in the U.S. (3 years if you’re under 23 years old) Additional Information: If you have previous employment experience in transportation (such as a delivery driver, driver, professional driver, driving job, truck driver, heavy and tractor-trailer driver, cdl truck driver, class a or class b driver, local truck driver, company truck driver, taxi driver, taxi chauffeur, cab driver, cab chauffeur, taxi cab driver, transit bus driver, bus driver, coach bus driver, bus operator, shuttle driver, bus chauffeur) you might also consider driving with Uber and earn extra money. We also welcome drivers who have worked with other peer-to-peer ridesharing or driving networks. Drivers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. Driving with Uber is a great way to supplement your part time or full time income. Uber welcomes applicants year round - summer, winter, fall, spring, and holiday. Sign up to drive with Uber and earn $1365*—if not more—when you complete 120 trips in your first 30 days. Terms apply. *This is a promotional offer and is only available to new drivers who have never previously signed up to drive or deliver with Uber; and complete the minimum trip threshold in their city within 30 days of signing up to drive. Any tips and promotions you make are on top of this amount. Limited time only. Offer and terms are subject to change. Click through to read full terms and conditions.

Earn at least $1365 driving with Uber when you complete your first 120 trips in 30 days. Why Uber? Driving is an easy way to boost your income while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary). What you need to know: * Signup in seconds: Get started today and we’ll provide support along the way. * Get paid fast: Cash out up to 5X a day with Uber’s Instant Pay. * Guaranteed earnings: Earnings guaranteed for your first 120 trips with Uber. * Flexible schedule: You control when and where you drive. * 24/7 support: The app gives you turn-by-turn directions, and access 24/7 support if you need help. What you need to get started: * 21 years old or older * A 4-door vehicle * A valid U.S. driver’s license and vehicle insurance * At least one year of driving experience in the U.S. (3 years if you’re under 23 years old) Additional Information: If you have previous employment experience in transportation (such as a delivery driver, driver, professional driver, driving job, truck driver, heavy and tractor-trailer driver, cdl truck driver, class a or class b driver, local truck driver, company truck driver, taxi driver, taxi chauffeur, cab driver, cab chauffeur, taxi cab driver, transit bus driver, bus driver, coach bus driver, bus operator, shuttle driver, bus chauffeur) you might also consider driving with Uber and earn extra money. We also welcome drivers who have worked with other peer-to-peer ridesharing or driving networks. Drivers using the Uber platform come from all backgrounds and industries ranging from traditional driving and transportation industries to other industries. Driving with Uber is a great way to supplement your part time or full time income. Uber welcomes applicants year round - summer, winter, fall, spring, and holiday. Sign up to drive with Uber and earn $1365*—if not more—when you complete 120 trips in your first 30 days. Terms apply. *This is a promotional offer and is only available to new drivers who have never previously signed up to drive or deliver with Uber; and complete the minimum trip threshold in their city within 30 days of signing up to drive. Any tips and promotions you make are on top of this amount. Limited time only. Offer and terms are subject to change. Click through to read full terms and conditions.

Job DescriptionDescription: Summary: Heavy Haul Transport Operator / CDL A oversize over-dimensional Truck Driver will operate a multi-axle piece of equipment in our heavy haul trucking division. A driver in this classification utilizes their assigned truck and trailer to facilitate transportation of heavy equipment within a time sensitive duration. As a CDL A holder you will specialize in over size and over dimensional transport throughout the South East. We offer project based jobs with in house permitting to our customers. To learn more about our company go to tefcotransportation.com. Duties and Responsibilities of a Class A/CDL A Heavy Haul Transport Operator / Heavy Equipment Truck Driver: • Operate Heavy Haul truck and trailer in a safe and courteous manner., • Acknowledge and carry out written/oral instructions from dispatchers and customers., • Transport heavy loads to customers in a timely manner., • Ensure delivery of appropriate items in accordance with customer invoices., • Ensure tractor and trailer are clean and in good working condition., • Posses mechanical knowledge of assigned equipment., • Perform daily maintenance checks and reports malfunctions to management/mechanics., • Document and communicate repair requests to mechanics., • Ensure customer messages/communications are relayed to appropriate management., • Assist in maintaining a neat and clean workplace., • Provide exceptional customer service., • Complete Bill of Ladings., • Comply with E-Log rules and regulations. While performing the duties of the Heavy Haul Transport job, the driver is frequently exposed to outdoor weather conditions. The driver is occasionally exposed to work near moving mechanical parts; work in high, precarious places; toxic or caustic chemicals; risk of electrical shock and vibration. The noise level in the work environment is usually moderate. Physical Demands of a Class A/CDL A Heavy Haul Transport Operator / Heavy Equipment Truck Driver: The physical demands must be met by a driver to successfully perform the essential functions of the heavy haul transport job. The driver must frequently lift and/or move up to 50 pounds. While performing the duties of this job, the heavy haul transport driver is frequently required to stand, walk, sit, reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. Compensation: Average annual pay range commensurate with experience: Entry- Level: $65,000 to $80,000 | Mid-Level: $80,000 to $95,000 | High-Level experience $95,000 - $120,000 Requirements: • Must pass a pre-employment drug test, • Must have a clean criminal background, • High school diploma or general education degree (GED), • MUST have Two to Four years of driving experience of lowboy trailers, RGN’s, double dropped and/or sliding axle trailers., • Experience in loading and securement of heavy construction machinery and vehicles, such as excavators, bulldozers, and buses., • Valid Class A Driver's License, • Class A CDL Florida Driver’s License, • Current DOT Physical, • TWIC

Team Owner-Operators Wanted – Reefer Dry Van Freight (All 48 States) We're looking for professional team owner-operators to join a strong, driver-focused company hauling reefer and dry van freight across all 48 states. What We Offer: • Great pay: 72.5% of the load PLUS 100% of any fuel surcharge (FSC) we receive, • Teams can earn up to $400,000 in gross revenue, • Quick settlements, • Sweet sign-on bonus, • No truck? No problem — short-term lease options available, • Consistent miles, • Steady reefer dry van freight, • ELD provided, • Truck insurance provided, • License plate provided, • Clean CDL and background, • Minimum 2+ years driving experience

Let's get the show on the road! Now Hiring Team & Solo Owner Operators Since 1949, the people of Clark Transfer have moved the sets, lights and costumes for countless Broadway shows and live entertainment productions. This is specialized work which requires us to fit into a uniquely “show-business” way of operating. About Clark Transfer Clark Transfer runs exclusively with Owner Operators — we do not hire lease-purchase drivers. All drivers must already own their own tractor. Owner Operators pull our customized 48' and 53' trailers. Clark Transfer operates directly in 48 states and Canada. Clark Transfer continues today under the same ownership and management. It is widely recognized as the “gold standard” for transportation in the theatrical industry. Make More. Drive Less. • Solo Owner Operators average $175,000 to $225,000+ on less than 85k miles per year, • Team Owner Operators average $275,000 to $325,000+ on less than 110k miles per year, • Solos: Guaranteed minimum weekly average: $3,500/week worked (most earn $3,750 - $4,250+), • Teams: Guaranteed minimum weekly average: $5,000/week worked (most earn $5,500 - $6,500+), • Company Supported Owner Operator health insurance program, • All miles paid, plus detention pay, bobtail, empty/loaded, • $5,000 referral bonus, • Paid fuel permits & fuel taxes, • Paid tolls while under dispatch via company-provided transponder, • Paid cargo/liability insurance, • $1.60/gallon or lower fuel price guarantee (average, after fuel surcharge) Requirements: • Minimum Age: 23, • License Classes: A, • OTR Exp: 2 Years (Must have 6 months in the last 12 months), • Must be Willing to Run OTR, • Solid work history with minimal gaps in employment over the last 3 years

Courtyard Flagler Jacksonville Marriott SECTION ONE: MCR Universal Role Standards EXECUTIVE SUMMARY CLEANLINESS and FRIENDLINESS! The MCR standard is to provide clean, friendly, well-organized and safe hotels for our guests. AREAS OF EXCELLENCE • Happy Guests, • Spotless Cleanliness, • Product Consistency & Quality 1. Happy Guests • Guest Relations: Greet guests happily upon arrival and throughout their stay with a smile., • Name Use: Use the guests’ names whenever possible, ensuring they feel properly welcomed., • Guest Satisfaction: All Team Members work together to contribute to great guest satisfaction scores., • Recovery: Ability to handle challenging guest situations with hospitality and a sense of urgency., • Hotel Knowledge: Strong knowledge of all features of the hotel facility and amenities., • Events: Awareness and support for all groups and events at the hotel., • Technology: Understanding of relevant technology for each role., • Phone Etiquette: Answer all incoming calls with friendly service using the approved greeting. 2. Teamwork • Communication: Communication between Team Members should be clear, honest, and professional., • Can Do Attitude: Willing to stretch beyond traditional role to meet the needs of the business and MCR’s guests. The Director of Sales will be responsible for the following: • Meeting and Exceeding Group Booking Goals, • Increase Average Daily Rate and Occupancy Growth, • Growing Market Share on Annual Basis, • Revenue Maximization and Expense Control, • Sales and/or Events Department Oversight 1. Meeting and Exceeding Group Booking Goals • Proactively develop quantifiable action plans and conduct site inspections. 2. Increase Average Daily Rate and Occupancy Growth • Coordinate with revenue and pricing team to focus on building pipelines for key dates and soft periods., • Secures new business and demonstrates the ability to be proactive. 4. Revenue Maximization and Expense Control • Maximize total revenues and control expenses to meet and exceed hotel profitability objectives. 5. Sales and/or Events Department Oversight • Oversee operations of the hotel sales function including sales, follow-up and sales administration., • Execute and support the operational aspects of business booked, including generating proposals, writing contracts and customer correspondence. 6. Oversee the event management of group bookings and ensure seamless on-property experience with friendly service for all contracted customers. Carries out the MCR standard to have a clean, spotless, well-organized and safe hotel at all times. • Need to receive great guest satisfaction scores. 7. Maintain Client Relationships & Networking • Build and maintain professional and active relationships with clients, third-party meeting planners, referral sites, and other key sources as lead generators., • Maintain strong visibility in local community and industry organizations by positively representing the hotel on site visits, trade shows, and sales calls., • Attend any meetings and any other functions required by the hotel or management, even outside typical office hours. SECTION THREE: Qualifications & Requirements Qualifications: • Bachelor’s or Associate’s Degree Preferred., • Work Experience: Previous supervisory experience preferred. Progressive experience in the hospitality, hotel, restaurant, or service industry, including Rooms and Food & Beverage departments preferred., • Must have a positive attitude and willingness to learn., • Possess highly developed verbal & written communication skills., • Ability to influence others, negotiate, provide friendly service and possess professional selling skills., • Must be able to work independently and simultaneously manage multiple tasks., • Must have attention to detail, meet deadlines and demonstrate strong organization and presentation skills. Physical Working Demands & Working Environment: The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to: • Stand or remain in a stationary position for long periods of time (3-4 hours at a time)., • Type on and operate computers and other office machinery or devices, do 10-key operation and data entry, dial a telephone, manually manipulate objects, handles, tools, and/or controls., • Inspect and visually observe details at close range (within a few feet) and from long range. Language and Reasoning Skills: To perform the duties of this job, an individual must be able to: • Read, write, understand and communicate with others effectively using the English language., • Read and interpret documents in English, such as safety rules, operating and maintenance instructions, and procedure manuals, newspapers, periodicals, journals, and manuals., • Write routine reports, correspondence, business letters, summaries, and reports in English using prescribed format, and conforming to all rules of punctuation, grammar, diction, and style., • Ability to speak effectively in English before groups such as customers or employees. This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. The Employer retains the right to change or assign other duties to this position. This document does not create an employment contract, implied or otherwise, other than an at-will relationship. Our Company • MCR is the 3rd-largest hotel owner-operator in the United States., • Founded in 2006, our company has offices in New York City, Dallas, Chicago, and Richmond, Virginia., • MCR has a $5.0 billion portfolio of 148 premium-branded hotels containing more than 22,000 guestrooms across 37 states and 106 cities., • MCR has more than 7,000 team members across the country and operates hotels under 9 Marriott brands, 8 Hilton brands and a number of unflagged independent hotels., • MCR was named one of Fast Company’s 10 Most Innovative Travel Companies of 2020., • MCR is a three-time recipient of the Marriott Partnership Circle Award, the highest honor Marriott presents to its owner and franchise partners, and a recipient of the Hilton Legacy Award for Top Performer., • Hotel Discounts, • Weekly Pay, • Paid Time Off, • Retirement Options, • Referral bonuses, • Career advancement & upward mobility, • Health, Dental, Vision Insurance- available after 30 days of employment for full-time team members

Job Description Fairstead is a purpose-driven real estate firm dedicated to building sustainable communities across the country. Headquartered in New York, with offices in Colorado, Florida, Texas, and Washington DC, Fairstead owns a portfolio of more than 27,000 apartments across 28 states that includes 27,000 units under management. Fairstead's commitment to communities is realized through a comprehensive platform that leverages in-house expertise in acquisitions, development, design and construction, asset management, and property management. Fairstead's primary mission is to provide high quality housing to all regardless of income, and to make our stakeholders feel "Right at Home." We accomplish this through an empathetic and innovative approach, and by utilizing our interdisciplinary platform as an investor, developer, owner, and operator. Fairstead's Core Values: Innovation, Determination, Integrity, Humility, Empathy and Partnerships The Porter provides routine cleaning and custodial maintenance of the property's exterior. They are responsible for maintaining the clean and hygienic condition of the property's premises and facilities. RESPONSIBILITIES: • Assist with repairing and maintaining the community features., • Ensure a safe and clean-living experience for our residents., • Maintain a high-level of customer service., • Walk the property daily, inspecting all areas for cleanliness and safety, and helping to maintain great curb appeal., • Generous employer contribution for Medical Insurance through Meritain Health., • Employer Paid Vision Plans., • Company Matched 401(k) Retirement Plan: 100% of the first 3%; 50% of the next 2%., • 12+ paid Holidays., • 15 days of PTO., • 7 Sick days., • Employer Paid Life Insurance., • Flexible Spending Account., • Nationwide Pet Insurance., • Disability Insurance., • Laser Correction Discount., • Employee Discounts on appliances, apparel, and more. QUALIFICATIONS: • General interest in custodial and/or maintenance work and an ability to demonstrate mechanical aptitude., • Availability to work a flexible schedule, including weekends and being on call. For information about how we use your personal information, including information submitted for career opportunities, please review our Privacy Policy at

Key Responsibilities Operate machines to produce pouches according to specifications Monitor machine performance and adjust as needed to maintain optimal production levels Maintain accurate production records via electronic and manual means and report any discrepancies to the Production Supervisor C

Job Description Machine Operator- Metal Fabrication Job Description We are seeking a Machine Operator to join our dynamic metal fabrication department in our manufacturing facility. You will be tasked with operating a variety of metal fabrication machinery including CNC press brake, CNC turret press, CNC shear, and CNC punch press. Your daily duties include bending, shaping, punching, and cutting metal to specifications, as well as reading blueprints and a tape measure. You will be responsible for loading and unloading your machine by hand. You will be working independently on the machine, so a high level of responsibility and ownership is required. Job Overview: • Job title: Machine Operator, • Pay: $17.50-22.00/hr (based on shift/skills), • Shift Options: 1st, 2nd and 3rd shifts available, • Manufacturing environment (non-climate controlled), • Machine operation experience is required, • Ability to read tape measure is required, • Proficiency using computers, • Experience operating CNC machinery is preferred, • Experience working with metal fabrication machinery is a plus, • Ability to lift 50+ pounds This is a contract-to-hire position (90 days) with benefits offered while on contract. Company has the following benefits once permanent: • Free Employee Benefits (Medical, Vision, Dental), • 10 Paid Holidays, • Quarterly Profit Sharing Bonuses, • Safety Shoes Stipend Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jacksonville,FL. Application Deadline This position is anticipated to close on Jan 23, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionInjection Mold Machine Operator Pay: $22 an hour Shift: 3:00pm - 11:00pm Monday through Friday Location: Northside Jacksonville, Florida Job Description Install and set up injection molds for production. Start up injection molding machines in a fast-paced custom injection molding facility safely and efficiently. Assist the Shift Supervisor in scheduling operators, providing operator training, and performing all supervisory functions in the absence of the Shift Supervisor. Troubleshoot and adjust injection molding machine parameters to maintain quality and maximize product output. Address and correct molding quality defects, ensuring a clean and safe work environment within the molding department. Responsibilities • Set up and change over molds for production runs., • Ensure proper machine operation and part quality., • Troubleshoot molding issues and perform basic maintenance., • Work closely with production and maintenance teams to optimize efficiency., • Respond to problems by performing corrective technical or mechanical solutions., • Assist in various maintenance functions, including preventive, corrective, and emergency maintenance on all injection molding equipment., • Minimum 3 years of experience in injection molding mold setup., • Strong mechanical aptitude and attention to detail., • Ability to read and interpret setup sheets., • 1-3 years of injection molding setup and processing experience., • Supervisory experience is a plus., • Experience with engineering resins such as Nylon, Acetal, and Polycarbonate is a plus. There is an opportunity for career advancement to a process technician role, providing a pathway for growth within the company. Work Environment Work in a production environment where you will utilize advanced tools such as micrometers and CNC machines to ensure efficient operations. Job Type & Location This is a Contract to Hire position based out of Jacksonville, FL. Pay and Benefits The pay range for this position is $22.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jacksonville,FL. Application Deadline This position is anticipated to close on Jan 20, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: Summary: Heavy Haul Transport Operator / CDL A oversize over-dimensional Truck Driver will operate a multi-axle piece of equipment in our heavy haul trucking division. A driver in this classification utilizes their assigned truck and trailer to facilitate transportation of heavy equipment within a time sensitive duration. As a CDL A holder you will specialize in over size and over dimensional transport throughout the South East. We offer project based jobs with in house permitting to our customers. To learn more about our company go to tefcotransportation.com. Duties and Responsibilities of a Class A/CDL A Heavy Haul Transport Operator / Heavy Equipment Truck Driver: • Operate Heavy Haul truck and trailer in a safe and courteous manner., • Acknowledge and carry out written/oral instructions from dispatchers and customers., • Transport heavy loads to customers in a timely manner., • Ensure delivery of appropriate items in accordance with customer invoices., • Ensure tractor and trailer are clean and in good working condition., • Posses mechanical knowledge of assigned equipment., • Perform daily maintenance checks and reports malfunctions to management/mechanics., • Document and communicate repair requests to mechanics., • Ensure customer messages/communications are relayed to appropriate management., • Assist in maintaining a neat and clean workplace., • Provide exceptional customer service., • Complete Bill of Ladings., • Comply with E-Log rules and regulations. While performing the duties of the Heavy Haul Transport job, the driver is frequently exposed to outdoor weather conditions. The driver is occasionally exposed to work near moving mechanical parts; work in high, precarious places; toxic or caustic chemicals; risk of electrical shock and vibration. The noise level in the work environment is usually moderate. Physical Demands of a Class A/CDL A Heavy Haul Transport Operator / Heavy Equipment Truck Driver: The physical demands must be met by a driver to successfully perform the essential functions of the heavy haul transport job. The driver must frequently lift and/or move up to 50 pounds. While performing the duties of this job, the heavy haul transport driver is frequently required to stand, walk, sit, reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. Compensation: Average annual pay range commensurate with experience: Entry- Level: $65,000 to $80,000 | Mid-Level: $80,000 to $95,000 | High-Level experience $95,000 - $120,000 Requirements: • Must pass a pre-employment drug test, • Must have a clean criminal background, • High school diploma or general education degree (GED), • MUST have Two to Four years of driving experience of lowboy trailers, RGN’s, double dropped and/or sliding axle trailers., • Experience in loading and securement of heavy construction machinery and vehicles, such as excavators, bulldozers, and buses., • Valid Class A Driver's License, • Class A CDL Florida Driver’s License, • Current DOT Physical, • TWIC

Job Description Position Title: BMET I Join Intelas, a Compass One Healthcare company. Intelas, a Compass One Healthcare company, delivers smarter asset management by blending expert service teams with intelligent, data-driven strategies that help hospitals improve uptime, simplify oversight, and make more informed capital decisions. Our programs support 100% regulatory compliance and drives 98% equipment uptime—so clinicians can focus on care, not equipment issues. We support nearly 4,500 healthcare sites nationwide—from large, campus-based acute care hospitals to system-integrated outpatient clinics. With more than 1.15 million medical devices managed, we provide the clarity and consistency needed in today’s rapidly evolving healthcare environment. Join Intelas—where your career thrives, your potential is unleashed, and your work directly supports patient care. Whether you're just starting out or are a seasoned professional, our people-first approach ensures opportunities for continuous growth, development, and fulfillment. Explore more at intelashealth.com. Job Summary Key Responsibilities: • Performs planned maintenance and electrical safety inspections on a broad range of patient care and selected support equipment in compliance with established standards., • Manages all assigned equipment and schedules service., • Performs pre-acceptance inspections and develop PM procedures on equipment; maintains files on procedures and manuals., • Ensures test equipment is working properly and calibrated within established intervals., • Responds expeditiously to calls from clinical departments to evaluate and rectify valid operator complaints and concerns., • Researches and initiates orders for repair parts, working within established budget parameters., • Maintains purchase order log and validate invoices for payment (field service personnel only)., • Provides informal training to equipment users and Crothall Services Group staff as requested or when circumstances dictate., • Makes recommendations to the Department Manager regarding service strategies on equipment; keeps supervisor informed of activities, needs and problems., • Participates in the Quality Improvement / Risk Management program by gaining an understanding of the issues and concerns of customers and making recommendations for improvement., • Maintains an orderly and functional work environment., • Provides emergency on-call responsibilities as needed., • Documents all significant asset related actions in compliance with department practices., • Participates in department meetings., • Collaborates with fellow technical personnel in department meetings to ensure they are kept abreast of technical updates and/or device related problems. Preferred Qualifications: • Associates degree in electronics/biomedical equipment technology, military training or equivalent experience, • 1-3 years servicing clinical/patient care equipment in a hospital environment, • For field service positions requiring travel, valid driver’s license is required, • Ability to work independently with some supervision, • Good communication and strong customer service skills, • Good organization and time management skills, • Working knowledge of computer applications pertaining to tracking service histories and producing reports on assets, • Good trouble-shooting skills, • Ability and willingness to serve "on-call" duty as required Intelas is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Intelas are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave, • Personal Leave Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Intelas maintains a drug-free workplace.

Job Description Machine Operator- Metal Fabrication Job Description We are seeking a Machine Operator to join our dynamic metal fabrication department in our manufacturing facility. You will be tasked with operating a variety of metal fabrication machinery including CNC press brake, CNC turret press, CNC shear, and CNC punch press. Your daily duties include bending, shaping, punching, and cutting metal to specifications, as well as reading blueprints and a tape measure. You will be responsible for loading and unloading your machine by hand. You will be working independently on the machine, so a high level of responsibility and ownership is required. Job Overview: • Job title: Machine Operator, • Pay: $17.50-21.00/hr (based on shift/skills), • Shift Options: 1st, 2nd and 3rd shifts available, • Manufacturing environment (non-climate controlled), • Machine operation experience is required, • Ability to read tape measure is required, • Proficiency using computers, • Experience operating CNC machinery is preferred, • Experience working with metal fabrication machinery is a plus, • Ability to lift 50+ pounds This is a contract-to-hire position (90 days) with benefits offered while on contract. Company has the following benefits once permanent: • Free Employee Benefits (Medical, Vision, Dental), • 10 Paid Holidays, • Quarterly Profit Sharing Bonuses, • Safety Shoes Stipend Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jacksonville,FL. Application Deadline This position is anticipated to close on Jan 23, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Machine Operator- Metal Fabrication Job Description We are seeking a Machine Operator to join our dynamic metal fabrication department in our manufacturing facility. You will be tasked with operating a variety of metal fabrication machinery including CNC press brake, CNC turret press, CNC shear, and CNC punch press. Your daily duties include bending, shaping, punching, and cutting metal to specifications, as well as reading blueprints and a tape measure. You will be responsible for loading and unloading your machine by hand. You will be working independently on the machine, so a high level of responsibility and ownership is required. Job Overview: • Job title: Machine Operator, • Pay: $17.50-21.00/hr (based on shift/skills), • Shift Options: 1st, 2nd and 3rd shifts available, • Manufacturing environment (non-climate controlled), • Machine operation experience is required, • Ability to read tape measure is required, • Proficiency using computers, • Experience operating CNC machinery is preferred, • Experience working with metal fabrication machinery is a plus, • Ability to lift 50+ pounds This is a contract-to-hire position (90 days) with benefits offered while on contract. Company has the following benefits once permanent: • Free Employee Benefits (Medical, Vision, Dental), • 10 Paid Holidays, • Quarterly Profit Sharing Bonuses, • Safety Shoes Stipend Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jacksonville,FL. Application Deadline This position is anticipated to close on Jan 23, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Position Title:Biomedical Technician III Join Intelas, a Compass One Healthcare company. Intelas, a Compass One Healthcare company, delivers smarter asset management by blending expert service teams with intelligent, data-driven strategies that help hospitals improve uptime, simplify oversight, and make more informed capital decisions. Our programs support 100% regulatory compliance and drives 98% equipment uptime—so clinicians can focus on care, not equipment issues. We support nearly 4,500 healthcare sites nationwide—from large, campus-based acute care hospitals to system-integrated outpatient clinics. With more than 1.15 million medical devices managed, we provide the clarity and consistency needed in today’s rapidly evolving healthcare environment. Join Intelas—where your career thrives, your potential is unleashed, and your work directly supports patient care. Whether you're just starting out or are a seasoned professional, our people-first approach ensures opportunities for continuous growth, development, and fulfillment. Explore more at intelashealth.com. Job Summary Key Responsibilities: • Performs planned maintenance and electrical safety inspections on a broad range of patient care and selected support equipment in compliance with established standards., • Manages all assigned equipment and schedules service., • Performs pre-acceptance inspections and develop PM procedures on equipment; maintains files on procedures and manuals., • Ensures test equipment is working properly and calibrated within established intervals., • Responds expeditiously to calls from clinical departments to evaluate and rectify valid operator complaints and concerns., • Researches and initiates orders for repair parts, working within established budget parameters., • Maintains purchase order log and validate invoices for payment (field service personnel only)., • Provides informal training to equipment users and Crothall Services Group staff as requested or when circumstances dictate., • Makes recommendations to the Department Manager regarding service strategies on equipment; keeps supervisor informed of activities, needs and problems., • Participates in the Quality Improvement / Risk Management program by gaining an understanding of the issues and concerns of customers and making recommendations for improvement., • Maintains an orderly and functional work environment., • Provides emergency on-call responsibilities as needed., • Documents all significant asset related actions in compliance with department practices., • Participates in department meetings., • Collaborates with fellow technical personnel in department meetings to ensure they are kept abreast of technical updates and/or device related problems. Preferred Qualifications: • Associates degree in electronics/biomedical equipment technology, military training or equivalent experience, • 3 years servicing clinical/patient care equipment in a hospital environment, • For field service positions requiring travel, valid driver’s license is required, • Ability to work independently with some supervision, • Good communication and strong customer service skills, • Good organization and time management skills, • Working knowledge of computer applications pertaining to tracking service histories and producing reports on assets, • Good trouble-shooting skills, • Ability and willingness to serve "on-call" duty as required, • Strong work ethic and ability to work as a member of a team Apply to Intelas today! Intelas is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Intelas are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave, • Personal Leave Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Intelas maintains a drug-free workplace. Req ID: 1488320 Intelas Deborah Chermak [[req_classification]]

Job DescriptionBusiness Development Representative (BDR) Company: Beacon Talent Location: Remote (US-based preferred) Type: Full-time Website: About Beacon Talent Beacon Talent is a boutique executive search and talent advisory firm partnering with venture-backed and growth-stage companies to help them hire critical leadership and senior IC roles. We work directly with founders, CTOs, CPOs, and executive teams to solve complex hiring problems across engineering, product, data, GTM, and healthcare/telemedicine. We are known for operator-grade search, deep market understanding, and speed with judgment. Our work is high-touch, consultative, and outcome-driven. The Role We’re hiring a Business Development Representative (BDR) to help us identify, engage, and qualify high-potential companies that are actively hiring or approaching inflection points. This role is ideal for someone who wants to develop real sales instincts, learn how founders buy professional services, and build a career in B2B services, recruiting, or talent advisory. This is not a high-volume, transactional SDR role. You’ll be expected to think, research, personalize, and communicate like a professional. What You’ll Do * Identify and research target companies (VC-backed startups, SMBs, mid-market firms) aligned with Beacon’s ICP * Develop thoughtful, personalized outbound messaging across email, LinkedIn, and light calling * Engage founders, executives, and hiring leaders in high-signal conversations * Qualify inbound and outbound leads based on hiring urgency, scope, and fit * Book discovery calls for the Founder / Managing Partner * Maintain clean CRM records and track outreach activity and outcomes * Continuously refine messaging based on what resonates in the market * Collaborate on account-based outreach strategies for priority companies What We’re Looking For * 1–3 years of experience in BDR/SDR, recruiting, consulting, or B2B sales * Strong written communication skills—you can write clearly, confidently, and persuasively * Comfort speaking with senior stakeholders (VP, C-suite, founders) * High attention to detail and strong research instincts * Curious mindset—you want to understand businesses, not just pitch them * Self-directed, accountable, and comfortable working in a lean environment * Familiarity with tools like LinkedIn, CRM systems, Apollo/Clay/ZoomInfo, or email sequencing tools is a plus What Success Looks Like * Consistently booking qualified discovery calls with decision-makers * Demonstrating strong judgment in who is and isn’t a good fit * Improving response rates through better targeting and messaging * Becoming fluent in Beacon’s positioning, services, and ideal customer profile * Growing toward expanded responsibility (Senior BDR, Account Manager, or Recruiter track) Compensation & Growth * Competitive base salary * Performance-based commission tied to qualified meetings and closed deals * Clear growth path and exposure to full deal cycles * Direct mentorship from the Founder and senior search partners Why Beacon Talent * Work directly with founders and executives at fast-growing companies * Learn how high-stakes hiring decisions actually get made * Small team, high trust, real responsibility * No fluff, no boiler-room tactics—just thoughtful, high-quality work

Job Description Bottling Line Operator Job Description We are seeking skilled Bottling Line Operators to operate various production machinery including depalletizing, filling, rinsing, capping, labeling, case packing, case labeling, palletization, and other duties as assigned. The ideal candidate will ensure efficient and safe operation of bottling line machines, troubleshoot problems, perform maintenance, and participate in continuous improvement initiatives. Responsibilities • Operate bottling line machines/equipment in a correct, safe, and efficient manner., • Detect malfunctions of bottling line machines/equipment and troubleshoot problems promptly., • Address and resolve equipment issues or escalate to Team Coordinator/Supervisor., • Make adjustments to machines to achieve optimal performance while following all safety protocols., • Inspect product and packaging materials throughout various stages for quality to ensure adherence to quality standards and specifications., • Perform and document all reports and product quality inspections in accordance with SOPs., • Actively participate in safety initiatives, problem-solving, Lean, Self-Directed Teams, continuous improvement, and line efficiencies., • Perform changeovers and autonomous maintenance on equipment., • Participate in SMED activities to improve overall changeover process and line performance., • Ensure all safety procedures and standard operating procedures (SOPs) are accurately followed and documented., • Perform housekeeping activities as required., • Ability to work any shift and/or overtime as required., • Experience in depalletizing, filling, rinsing, capping, labeling, case packing, and palletization., • High-speed manufacturing and production experience., • High School diploma or equivalent., • Strong mathematical, reading, and comprehension skills., • Excellent communication, documentation, and organizational skills., • Detail-oriented with strong mechanical aptitude., • Self-motivated and proactive with strong interpersonal skills., • Ability to work well in a team environment., • Strong problem-solving and troubleshooting skills., • Ability to work in a fast-paced production environment., • Bottling operators work 2nd Shift (3PM - 11:30PM), Monday-Friday., • Must be open to training on days for 2-6 weeks and then moving to second shift. Work activity takes place in a bottling facility with exposure to noise, vibration, fumes, and operating equipment. The environment may experience fluctuating temperatures (both hot and cold). Bottling operators work 2nd Shift (3pm - 11:30pm), Monday through Friday. Job Type & Location This is a Contract to Hire position based out of Jacksonville, FL. Pay and Benefits The pay range for this position is $18.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jacksonville,FL. Application Deadline This position is anticipated to close on Jan 17, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Are you interested in working with KMS Solutions, but don't see a current position that fits? Please submit your resume and application here! KMS Solutions is currently collecting resumes for current and future openings. Should your experience align with KMS’s needs, someone from our hiring team will reach out. We look forward to learning more about your background, experience, and career aspirations. Thank you for your interest in a career opportunity with KMS Solutions! Our Philosophy - Building Trusted Relationships KMS Solutions, LLC is a technical management / solutions company that specializes in engineering, analysis, and cyber security. Founded in 2005, KMS is a certified small business with nearly two decades of experience supporting the Department of Defense as well as many other departments and programs critical to our Nations security and well-being. KMS is a two-time winner of the USA Today Top Workplaces recognizing quality workplace cultures across the United States who put their employees first. Additionally, we received the Providence Journal Rhode Island Top Workplaces award and Culture Excellence Awards for Compensation & Benefits, Innovation, Leadership, Purpose & Values and Work-Life Flexibility. Our clients include the US Intelligence Community, Department of Defense, the Joint Staff, Navy, Army, and the Department of State. We have worked closely with DIA, CENTCOM, US Army National Ground Intelligence Center and the National Media Exploitation Center. Our strength is in collectively providing integrated services. We are dedicated to moving our Nation’s agenda forward. It’s the key ingredient that makes us who we are – like our passion for excellence, our innovation throughout our organization and our long-standing customer relationships. You will see this simple philosophy at work in everything we do. It defines who we are, challenges us, forces our minds to be open, and to be a world-class company. Core Values Our Core Values are the guiding principles and our fundamental beliefs that dictate our behavior consistently, not time to time, situation to situation, or person to person, but rather they are the underpinning of our company culture. These values are represented in everything we do: Respect, Authentic Communications, Integrity, Lasting Relationships, and Sustained Excellence (R.A.I.L.S.) Respect - Our interaction with colleagues, peers, customers and others is marked by respect and honor. Authentic Communication - We share ideas, thoughts and concerns with our clients and partners in the most authentic manner. Integrity - We do what we say, say what we do, always practice high ethical standards and honor commitments. Lasting Relationships - We are focused on forging strong, long-term relationships with clients and associates. Sustained Excellence - We consistently deliver genuine value to those whom we serve, provide superior customer value, and work to continuously improve our performance. While delivering genuine value to our customers, we are committed in developing our people, building our brand, and supporting the communities we live and work in. R.A.I.L.S. is an unwavering guide and our core values give us a framework for leadership and daily decisions and help us enjoy our time at work. What we hire (list of recent hires): • Veteran & Transitioning Navy - Military, • Program Manager - Project Manager, • Cybersecurity Engineer, • Cyber Security Specialist, • NQV – Navy Qualified Validator, • Mechanical Engineer, • Electrical Engineer, • Electronics Engineer, • Systems Engineer, • Software Engineer, • Product Integration Engineer, • Reliability Engineer, • System Safety Engineer, • Computer Engineer, • Action Officer, • Auditor, • Technical SME - Subject Matter Expert, • Program Analyst, • Acquisition Analyst - Acquisitions Analyst, • BFM – Business Financial Management, • Navy Financial Analyst, • Logistician & Logistics Analyst, • Management Analyst, • Naval Analyst, • Business Process Analyst, • Configuration Management Specialist, • Integrated Project Team Development (IPTD) Facilitator, • Coach / Trainer, • Technical Writer, • Engineering Technician, • Electronics Technician, • Program Administrator, • Database and SharePoint Analyst, • Tradesmen - Skilled Trades, • Crane Operator / Rigger, • Fabricator, • Contract Specialist - Contractor, • Technical Consulting - Consultant, • Executive Assistant Benefits and Additional Compensation: KMS offers a competitive benefits packaging including medical, dental and vision insurances, flexible spending account, PTO, paid holidays, military leave, bereavement leave, 401k / retirement savings plan, professional development and tuition reimbursement, basic and voluntary life insurance / AD&D, short-term and long-term disability, voluntary AFLAC supplemental insurance products and employee assistance plan (EAP) program. Additionally, KMS offers employee referral bonuses and a discretionary annual bonus. AAP/EEO Statement: KMS Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. KMS Solutions is a drug free workplace.

Industrial Automation Technician Position Type: Full-time, Non-exempt, Hourly Reports to: Facilities Maintenance Manager Supervisory Responsibility: None Location: Jacksonville, FL Manufacturing Facilities Company Summary Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. Summary Objective We are seeking a dedicated and self-motivated professional CNC Automation Maintenance Technician - With expertise in operating, troubleshooting, and repairing Voortman and Pema metalworking machinery. The ideal candidate is skilled in conducting routine maintenance and repairs as well as troubleshooting mechanical, electrical, pneumatic, and hydraulic systems to ensure optimal equipment performance and long-term reliability. Guided by the principle of Improvement through Excellence, our maintenance team and CNC Automation Operators cooperate as a team to guarantee the utmost dependability and operability of automation systems. Essential Functions • Responsible for delivering performance and operational uptime of our automated systems including but not limited to automated metal fabrication equipment, automated painting equipment and other technologies as assigned., • Support the development of maintenance plans for key automated manufacturing/fabrication equipment, • Provide triage support during outages of our automated systems, • Participates in workshops, Kaizen events and other related activities as needed, • Perform preventive and corrective maintenance on automated manufacturing/fabrication equipment, • Diagnose and resolve mechanical, electrical, and control system issues to minimize downtime., • Configure, calibrate, and optimize robotic welding cells and automation components., • Collaborate with engineering and production teams to implement process improvements and equipment upgrades., • Maintain accurate documentation of maintenance activities, equipment performance, and repair histories (Upkeep software)., • Ensure compliance with safety standards and company policies during all maintenance and repair activities., • Provide technical support and training to operators and junior technicians as needed., • Partners internal and external teams to support manufacturing related initiatives, • Identifies barriers to success and solicits help from leadership as and when needed., • Robot calibration and servicing: Maintaining accuracy in automated weld paths, • Sensor and camera systems: Understanding seam tracking and adaptive welding technologies, • Welding power source maintenance: Checking leads, gas flow, and consumables, • Exposure to PLC and other industrial controls/automation technologies such as RSLogix5000, CAN-BUS systems etc., • Preventive maintenance routines: Lubrication, filter changes, and wear part inspections, • Troubleshooting and diagnostics: Identifying and resolving mechanical or software issues, • Electrical and hydraulic, pneumatic systems: Basic understanding of wiring, sensors, and fluid systems, • Safety compliance: Adhering to lockout/tagout procedures and machine safety protocols, • Robot calibration and servicing: Maintaining accuracy in automated weld paths, • Sensor and camera systems: Understanding seam tracking and adaptive welding technologies, • Welding power source maintenance: Checking leads, gas flow, and consumables, • Team Collaboration: Work closely with the production team to support smooth operations and continuous improvement initiatives., • Work Environment Upkeep: Maintain a clean, organized, and hazard-free work area. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies • Data gathering and analysis, • Planning and organizing., • Decision Making. Work Location This position will work out of our Imeson Facility in Jacksonville, FL. This position is not approved for telecommuting or working remotely. Work Environment Most work is performed in a production fabrication shop environment with exposure to loud machinery, welding equipment, grinders, and cutting tools. Presence of metal dust, fumes, and sharp materials; proper ventilation and PPE (personal protective equipment) are mandatory. Standing, bending, lifting, and moving heavy materials for extended periods. Temperature fluctuations depend on season and equipment usage; some areas may be hot due to operational needs. Physical Demands While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and the ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position. This position may require occasional weekend work. Travel Some occasional local day travel may also be necessary. Occasional travel to customer job sites and conferences may be required. Required Education and Experience • 10+ years of hands-on CNC operation and maintenance experience., • High school diploma or GED required, technical certification or associate degree in manufacturing technology or related field preferred., • Proficient in reading and interpreting electrical schematics, mechanical drawings, and technical manuals., • Proficient with Microsoft Office Word, Excel and Outlook, • Familiarity with welding processes and automated material handling systems., • Ability to work independently and in a team environment under minimal supervision., • Excellent problem-solving skills and attention to detail., • Familiar with metal processing equipment such as automated conveyors, paint systems, saws, and CNC equipment, • Familiarity with Voortman VACAM software and CNC programming Preferred. Preferred Education and Experience • Voortman Academy training or certification is a strong asset., • Knowledge of ISO, GMP, or other regulatory compliance standards., • Minimum 2+ years of experience operating Voortman metalworking machinery (e.g., V630, V310, V807, V304) Preferred., • Voortman Operator Training (includes VACAM, machine setup, and safety), • Welding certifications (e.g., AWS, EN ISO 9606), • CNC Machining or automation technician diplomas, • Safety training (e.g., OSHA, confined space, electrical safety), • Weld Control 300 training. Work Authorization Must be authorized to work in the USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Southern States Material Handling is more than just forklifts! With our flagship brands of Toyota and Raymond, we pride ourselves in successfully partnering with our customers to offer solutions that keep businesses running! Specializing in new & used equipment, operator training, equipment rentals, fleet management, service & repair, and warehouse solutions, Southern States Material Handling solves problems. We are looking for a capable Service Manager to join our team! As a Service Manager with Southern States Material Handling : Successfully create and maintain service operations, which exceed customer and technician needs. This includes timely, high quality service operations at competitive costs to the customer while maintaining sufficient profit margins and professional image for Southern States Material Handling. Come be a part of our Toyota/Raymond family! Top of the Line Benefits!! • 401(k) with company matching, • Dental insurance, • Health insurance, • Vision Insurance, • PTO and Vacation, • Paid Holidays, • Flexible Spending Account, • Life Insurance, • Tuition Reimbursement What you Need/Basic Qualifications: • Prior company experience as a Road Service Technician or previous Service Manager experience, • Proficiency with MS Office including Word, Excel, Outlook, • Windows XP knowledge preferred, • Demonstrate above average time management, organizational, and follow-up skills, • Ability to multi-task and manage multiple assignments and tasks and set priorities, as well as adapt to changing conditions and work assignments, • Excellent verbal and written communication skills, • Positive people management skills, • Customer-focused with exceptional customer service skills Education and Certification Needed: • High School diploma or GED, • Technical school coursework in electrical, mechanical, or automotive field is preferred, • 2-5 years management or leadership experience preferably in a service environment strongly preferred What you’ll Do: • Support Technicians, service department associates, and branch management., • Provide training in all company functions: policies, procedures, timekeeping, and safety; ensure that these items are being adhered to., • Work to eliminate waste and lost time through training and coaching, • Maintain SSMH’s high company standards and ensure that all Technicians are taking care of and protecting the customers’ interests, and living up to our company standards, • Give assistance to all team members via phone and in person, as needed., • Manage the work in progress reporting – delegate responsibilities as necessary, • Effectively manage service coordinator and dispatch team to include assigning tasks, setting team goals, and time/attendance recording., • Monitor and encourage superior customer communications skills for all service department personnel., • Possession of strong communication skills; ability to communicate successfully with a wide variety of individual personality types, • Conferring with customers as required for problem/solution resolution and proper supervision of equipment repair and maintenance., • Take initiative in developing new methods and procedures for the service department as required, • Assist in technician performance reviews, and complete service team reviews, • Ensure all technician timecards are complete and accurate, • Monitor return to branch work orders and completed work orders for billing daily, • Conduct van inspections after each Technician meeting, • Participate in and bring value to all monthly team meetings, • Provide the Branch Operations Manager with technical expertise, as needed, • Monday through Friday daytime hours SSMH is an equal opportunity employer. SSMH does not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We are an inclusive organization and actively promote equality of opportunity for all with the right mix of talent, skills and potential.

Job Description Integrated Cooling Solutions (ICS) delivers HVAC solutions backed by technical expertise and strong manufacturer partnerships. With eight offices across Florida, we help clients design and implement the best systems for their space—backed by hands-on support and industry know-how. At ICS, people come first. We invest in our team's growth and success, creating a place where your work matters and your career can take off. If you're ready to be part of something dynamic and meaningful, we're excited you're here. The Opportunity We are seeking an experienced Commercial HVAC Service Technician. This position will be responsible for performing electrical and mechanical inspection, start-up maintenance on the equipment we sell. This is a full-time opportunity for an energetic go-getter. An ideal candidate will be customer service oriented and work well with others. Position requires a high level of correspondence with Project Managers, Service Coordinators and customers. Responsibilities • Performs electrical and mechanical inspection and maintenance on equipment to ensure peak performance, • Perform specific preventative maintenance including belt adjustments, oiling, greasing and cleaning of equipment, • Uses experience and technical skills with preventive maintenance and system operations to determine service requirements, • Ability to interpret engineering drawings in reference to layout, location and operation of the system(s), • Represents the company in a positive manner to other trades, contractors and owners, • Advises owner/representative of preventive maintenance inspections performed and corrective actions to be taken, • Suggest additional services that are beneficial to customer, • Works in a team-based environment to share information and workload while ensuring customer satisfaction, • Submits required paperwork to Service Coordinator in a timely manner, • Must work in a safe manner on a daily basis and ensure that all safety measures are taken at all times, • Performs other duties as assigned, • Flexibility to work overtime/ weekends, as required Qualifications • High School Diploma or equivalent, • Must have valid driver's license with good driving record, • Must have current HVAC certification and OSHA 10 Training plus 1-5 years' experience working as a Service Helper or Service Technician in a residential or commercial environment, • Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad), • Electrical knowledge required and EPA Certification Preferred (i.e. HVAC Journeyman, Boiler Operator, Gas Installer, etc.), • Ability to work in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, risk of electrical shock (high voltage), climbing/working at elevated heights, etc., • Must be able to climb, crawl, stoop, kneel and must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds Strategic Skills Ability to learn new skills and knowledge. Ability to understand concepts and complexity comfortably. Open to change and will try anything to find solutions. Able to handle uncertainty and make decisions without knowing the whole story. Operating Skills Ability to discern between tasks to determine how best to accomplish goals and organize task/people assignments to get results in a timely way. Ability to figure out processes and simplify them in order to maximize workflow. Behavior Skills Ability to manage people and situations when conflicts arise. Ability to seize opportunities with the drive to complete goals. Personal and Interpersonal Skills Ability to establish and grow relationships with customers through effective verbal and written communication. Dedicated to the needs of the customers, manufacturers and peers and has the patience to actively listen to all business partners. Able to solve problems and skillfully negotiate with a minimum of noise while managing stress. Demonstrates integrity and trust through appropriate directness and truthfulness. Ability to understand personal strengths and weaknesses, seek feedback and improve upon shortcomings. Environmental Requirements Will be required to work in an office environment and frequently in the field. Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate the computer keyboard and telephone, reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. Employees may perform other related duties as negotiated to meet the ongoing needs of the organization. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

We are seeking Rework Operators for an established company in the Jacksonville, FL area who will be assembling solar panels in an environment controlled, manufacturing facility.Schedule: 6am to 6pm, 2 days on/ 2 days off/ 3 days on/ 2 days off/ 2 days on/ 3 days off.Job Duties of the Rework Operator

Parker - JobID: 16678155 [Production Operator / Equipment Operator] As a CNC Machinist at Parker, you'll: Operate, set-up and adjust CNC lathes; Operate and do simple set-ups on CNC mill; Operate and adjust auxiliary equipment; Suggest improvements for standard or special tooling to suit materials or unusual cutting conditions; Do Operational sequence planning; Install chucks and collets and set bar stock feed mechanism...Hiring Immediately >>

Novolex is a leading manufacturer of food, beverage, and specialty packaging that supports multiple industries including foodservice, restaurant delivery and carryout, food processing, grocery and retail, and industrial sectors. Novolex manufacturing and sourcing expertise spans a diverse range of substrates including resin, paper, molded fiber, aluminum and more. We provide customers a broad array of stock and customized solutions with 120 product categories, 250 brands and over 39,000 SKUs. The Novolex sustainability vision is built upon three pillars: our products, our operations and our people. Each is critically important to our growth and future as a business. These pillars form the foundation of our company-wide commitment to sustainability, helping us achieve our ambitious goals through our wide-ranging initiatives. Compensation • Understand and follow all JSA's and safety procedures/policies, • Safely and efficiently set-up and operate extrusion lines to produce high quality HDPE film, • Operate extrusion lines in accordance with job safety analysis, standard operating procedures, quality procedures, and operator training to meet or exceed productivity requirements and minimize downtime and waste, • Ensure that proper materials are being used in accordance with procedures, • Monitor roll weights to ensure the correct gauge is maintained throughout the shift, • Assure proper packaging and labeling of film, • High School diploma or equivalent., • Eligible to work in the United States., • Successful completion of pre-employment background and drug screen., • Ability to work 12-hour day and night rotating shifts, • Work overtime as required, • Satisfactorily completes training courses as determined by management., • Ability perform the essential functions of the job with or without accommodation., • The commitment to stay safe and to continue to learn and develop. At Novolex, giving back to the local communities that support us is important. Our Focused Giving Program prioritizes support for organizations whose missions promote sustainability initiatives or address food and hunger needs. We also encourage facility level support of activities in the communities where our employees live and work. We offer constant opportunities for advancement. From skills development to advanced education programs, training and development programs and courses are available through MyLearning. Programs include company and industry training curricula, support for formal education through the Tuition Reimbursement Program, and a Learning Management System that supports and enhances employee skills at all levels of the organization. Novolex is committed to providing equal employment opportunity in all employment practices, including but not limited to selection, hiring, promotion, transfer, and compensation to all qualified applicants and employees without regard to age, race, color, national origin, sex, pregnancy, sexual orientation, gender identity, religion, handicap or disability, genetics, citizenship status, service member or veteran status, or any other category protected by federal, state, or local law. Any individual who, because of his or her disability, needs an accommodation in connection with an aspect of the Company's application process should contact .

GATE PARKWAY [Warehouse Associate / Forklift Operator] As a Forklift Driver at Costco, you'll: Operate an electric stand-up forklift to move pallets of merchandise and equipment throughout the warehouse; Hand stack product from partial pallets onto full pallets of product; Move pallets of merchandis

BUSCH DR SUITE 1 [Warehouse Associate / Forklift Operator] As a Forklift Operator at Costco, you'll: Operate an electric stand-up forklift; Move pallets of merchandise and equipment throughout the warehouse; Hand stack product from partial pallets onto full pallets of product.

DHL - Jacksonville [Warehouse Associate / Forklift Operator] As a Forklift Operator at DHL, you'll: Load, unload, move, stock, and stage products and materials using various types of forklifts or other power equipment; Pull and prepare product for shipment ensuring the exact number and types of prod

While performing the duties of this job, this position is required to have ordinary ambulatory skills sufficient to visit other locations; and the ability to stand, walk, stoop, kneel, crouch, and manipulate (lift, carry, move) light to medium weights of 10-50 pounds. In this role you will be respon

Baker Construction is the nation's top specialty concrete contractor. At Baker Construction, we welcome those who are driven to make things happen.

Axiom Staffing Group is searching for experienced Cherry Picker, Stand Up Forklift, and Sit Down Forklift Operators to join a large distribution warehouse in Jacksonville! Resumes and Interviews will be required! Application: Please apply with RESUME Picker, 2nd Shift, Forklift, Forklift Operator, 1st Shift, Lift Operator, Manufacturing, Staffing

Responsible of dealing with day to day paperwork in a warehouse environment (i. Warehouse Positions Pay Weekly. Various warehouse fulfillment specialist roles at Ryder support distribution across the US.