Trabajos pipe en Metairie, LouisianaCrear alertas

Job Description Installation of pneumatic and hydraulic systems, emergency shutdown systems and equipment under minimal supervision. • Layout, measure, fabricate and install tubing tray., • Layout, measure, bend, cut, thread, ream and fit hard pipe systems., • Install single line and group tubing and fittings., • Able to layout and install pneumatic and hydraulic panels and end devices., • Demolition of tubing and end devices., • Knowledge of industry and American Petroleum Institute standards., • Able to read relevant construction drawings., • Knowledge of pneumatic and hydraulic control logic., • Proficient in the use of tools of the trade., • Able to recognize and avoid safety hazards and dangers, • All above functions performed with minimal supervision.

Job DescriptionDescription: The primary purpose of the Electrical Foreman is to install and maintain electrical wiring, devices, systems, and equipment safely and adequately, while learning company processes and procedures and supervising electrical staff. Duties and Accountabilities: • Provide necessary tools and installation equipment in the work area prior to arrival of workers., • Provide installation instruction to the workers by detailed verbal explanation or detailed sketches., • Prepare sketches showing location of wiring and equipment or follows diagrams or blueprints insuring that concealed wiring is installed before completion of future walls, ceilings and flooring., • Provide all materials organized to ensure ease of installation in the work area., • Expedites tools, equipment, and materials to ensure that the workers stay in the work area., • Inspect and test the installation., • Call for code enforcement inspections., • Mark-up as-built drawings daily., • Timekeeping., • Enforce safety policies and respond to incidents., • Measures, cuts, bends, threads, assembles and installs electrical conduit using such tools as a hacksaw, pipe threader, rules and conduit benders., • Pulls wiring through conduit, assisted by a helper., • Splices wiring by stripping insulation from terminal leads with knife or pliers, twisting or soldering wires together and applying tape or terminal caps., • Connects wiring to lighting fixtures and power equipment using hand tools., • Installs control and distribution apparatus, such as switches, relays and circuit breaker panels and fastens in place with screws or bolts using hand or power tools., • Connects power cables to equipment and installs grounding leads., • Tests continuity of circuits to insure electrical compatibility and safety of components using testing instruments such as ohmmeter, battery and buzzer and oscilloscope., • Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation or replacement., • Disassembles and repairs defective electrical equipment or systems., • Load transport and unload materials, tools, equipment and supplies., • Maintains tools and equipment., • Be able to distinguish colors., • Knowledge of certain procedures such as LOTO, etc., • Responsible for observing and complying with all safety and project rules., • Evaluate information using personal judgement or measurable standards., • Work within precise limits and standards of accuracy., • Perform a variety of duties which may change often., • Perform arithmetical operations rapidly and accurately., • See detail in objects or drawings as 3-dimensional objects., • Work at heights without fear. Requirements: Knowledge, Skills, and Abilities: • Must be 18 years of age or older., • Must have completed high school or a GED equivalency test., • Completion of a formal apprenticeship program required with classroom work and on-the-job training is preferred., • Must have code knowledge., • Passed exams on the National Electrical Code, local and state codes and electrical theory as well as continuing education in order to meet licensure requirements., • Ability to learn new technology., • 5 years or more in documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently., • NCCER certifications written and/ or practical are strongly preferred., • Experience providing leadership, instructions and guidance to other craft workers in work crew, while working in the capacity of a journeyman., • OSHA 10 Hour preferred. Equal Employment Opportunity Employer. It is the company’s policy to recruit, test, hire, promote, transfer, compensate, train, grant leave, and terminate based on merit and business needs, and without regard to race, creed, age, color, ancestry/national origin, sex, genetic information, pregnancy, marital status, religion, sexual orientation/sexual identity, disability, citizenship status, veteran status, or other basis prohibited by law. Positions require I-9 employment verifications and may require drug screening, background and MVR checks.

Job Description ABOUT THE ROLE The Superintendent, MEP leads mechanical, electrical, and plumbing field execution for a new data center build - owning day-to-day site operations for this scope in a high-stakes, mission-critical environment. Reporting to the Construction Manager and Director, Construction, this role drives schedule, coordinates trades, and enforces safety and quality from mobilization through turnover. Superintendents are the standard on a Hut 8 site: what you walk past, you approve. Some of the key responsibilities you should expect are the following: Electrical Systems Supervise installation of MV/LV distribution: switchgear, transformers, generators, UPS, busway/busduct, PDUs, and branch circuits to the rack. Enforce cable management, termination and torque documentation, grounding, and labeling standards, and coordinate NETA acceptance testing and energization sequencing with the Superintendent, HV and the Electrical SME. Mechanical & Cooling Systems Supervise chilled water plants, air and liquid cooling systems, CRAH/CDU installation, piping and insulation, and hydronic balancing. Manage pipe flushing, pressure testing, and cleanliness protocols - contamination in a critical cooling loop is a commissioning-stopping event. Trade Sequencing in Dense Space Own trade stacking and sequencing across electrical, mechanical, plumbing, and controls in congested white space, galleries, and yards. Run BIM-supported coordination in the field and resolve clashes before they're installed clashes. Commissioning Handoff Drive completion of installation checklists and prerequisites supporting Level 1-3 commissioning, and support Cx execution through Levels 4-5 with the CXQC Field Manager - your installation quality is the Cx schedule's foundation. Safety & Quality Enforcement Enforce electrical safety (NFPA 70E), LOTO, energized work permits, and hot work controls as systems progressively energize around ongoing construction. Hold MEP trade partners to first-time quality with documented QC. Planning, Documentation & Issues Own the MEP three-week look-ahead, daily coordination, and progress reporting. Drive MEP RFIs and field issues to closure with the Project Engineer (MEP) and discipline engineers, and keep test records and as-builts current as systems complete. ABOUT YOU • What we're looking for:, • 7+ years supervising electrical and/or mechanical trades on data center, semiconductor, hospital, or heavy industrial projects; mission-critical strongly preferred., • Working knowledge of MV/LV power distribution, standby generation, UPS systems, and hydronic/liquid cooling plants, including testing and energization practices., • Experience driving Level 1-5 commissioning prerequisites and turnover documentation inside a live Cx program., • Strong trade-sequencing instincts in congested, schedule-critical space; fluent in look-ahead planning and manpower loading., • Safety leadership including NFPA 70E, LOTO, and energized-facility transitions; OSHA 30 preferred., • Pipe cleanliness, flushing, and pressure-test discipline for critical hydronic systems., • Comfortable with Procore/ACC, BIM field use, and full MEP drawing packages., • Clear documentation habits: dailies, QC records, and test documentation. ABOUT THE WORK ENVIRONMENT Full-time site-based role in St. Francisville, LA.

Job Description • Sign On Bonus: $5,000Pioneer Transportation - Where Strong Freight Creates Strong Paychecks.Hiring Flatbed Company Drivers & Lease Contractors. Over the road available in the eastern 2/3 of the country hauling construction, pipe, and steel commodities. Home Weekly in most of the US. Flatbed Company Driver: Company drivers average $1,800-2,000 per week Earn 27% of load revenue When freight goes up, your compensation does too! Flatbed Lease Contractor: Lease contractors gross $6,000-$7,000 per week Day-1 lease No wait period! 2023 truck models or newer Low weekly truck payments $625 - $800 All Driver Benefits: $5,000 sign-on bonus $5,000 referral bonus Home on weekends Reliable freight and dependable operations designed for consistency Paid orientation with travel and meals included! Pet and rider policy No forced dispatch Full medical and life insurance, 401k, and more! Vacation pay Requirements: Must possess a valid Class A commercial driver's license (CDL A) At least 12 months of verifiable commercial driving experience and flatbed experience To meet our current insurance provider's safety standards, all applicants must be at least 22 years of age at the time of application Why Drive with P&S? At P&S, we put our drivers first. We hire experienced flatbed drivers and treat them like family, providing higher support, better pay and utmost respect - and clean, comfortable trucks! And it's not just our opinion - in a recent survey of flatbed drivers, nearly 90% confirmed that P&S pays better than other flatbed trucking companies and is better to work for.

Job DescriptionPosition Summary Eagle Plumbing Repairs & Drain Cleaning is seeking an experienced, customer-focused Service Plumber to diagnose, repair, install, and maintain residential and light commercial plumbing systems. Our technicians are trusted professionals who provide honest recommendations, exceptional workmanship, and five-star customer service. The ideal candidate is self-motivated, mechanically skilled, safety-conscious, and committed to delivering quality work while representing Eagle Plumbing with integrity and professionalism. Essential Duties & ResponsibilitiesPlumbing Repairs • Diagnose plumbing problems accurately., • Repair water, drain, sewer, and gas piping systems., • Perform drain cleaning using cable machines and hydro jetting equipment., • Repair and replace water heaters (tank and tankless)., • Repair and replace sewer lines., • Repair and replace water service lines., • Repair slab leaks and underground piping., • Perform fixture installations and repairs., • Install garbage disposals, faucets, toilets, sinks, tubs, and showers., • Repair leaking pipes and valves., • Perform whole-home water repipes., • Complete sewer tunnel repairs and trench sewer replacements., • Install and repair backflow prevention devices when qualified.Diagnostic Responsibilities, • Perform video sewer inspections., • Locate underground sewer and water lines., • Conduct leak detection., • Perform hydrostatic testing., • Diagnose sewer stoppages., • Inspect cast iron drain systems., • Determine repair options., • Document findings with photographs and video.Customer Service Responsibilities, • Arrive on time and professionally dressed., • Introduce yourself to customers., • Explain plumbing problems clearly., • Present repair options honestly., • Educate customers on preventative maintenance., • Answer customer questions professionally., • Obtain customer approval before beginning work., • Collect payment upon completion., • Leave the work area cleaner than you found it., • Request customer reviews after successful service.Daily Responsibilities, • Review schedule before leaving for first call., • Inspect company vehicle daily., • Maintain stocked inventory., • Complete all required paperwork., • Submit job photos., • Upload invoices and reports., • Maintain communication with dispatch., • Follow company safety procedures., • Attend weekly training meetings., • Keep truck clean and organized.Sales Responsibilities Our technicians are trusted advisors—not pressure salespeople. Technicians are expected to: • Identify additional plumbing concerns., • Educate customers on available solutions., • Present multiple repair options., • Offer financing when appropriate., • Recommend preventative maintenance., • Build customer trust through honesty., • Maintain strong closing ratios through education and professionalism.Required Qualifications, • High School Diploma or GED, • Minimum 3 years residential plumbing experience preferred, • Valid driver's license with acceptable driving record, • Ability to pass background check, • Ability to pass drug screening, • Ability to lift 75 pounds, • Ability to work overtime and rotating on-call schedule, • Strong troubleshooting skillsPreferred Qualifications, • Louisiana Journeyman Plumber License (preferred), • Experience with ServiceTitan or field service software, • Sewer camera inspection experience, • Hydro jetting experience, • Water heater installation experience, • Tunnel repair experience, • Leak detection experience, • Excavation experienceTechnical Skills Technicians should be experienced in: • Drain cleaning, • Sewer repairs, • Water line repairs, • Water heater installation, • Tankless water heaters, • Cast iron replacement, • PVC, PEX, Copper, CPVC, • Gas piping, • Sewer camera inspections, • Pipe locating, • Leak detection, • Fixture installation, • Hydrostatic testing, • Basic excavation, • Reading blueprints (preferred)Physical Requirements, • Lift up to 75 pounds regularly., • Climb ladders., • Crawl under homes., • Work in confined spaces., • Dig trenches when required., • Work outdoors in all weather conditions., • Work in attics and crawl spaces., • Stand, bend, kneel, and climb throughout the workday.Performance Standards (KPIs) Technicians are evaluated on: KPIGoal Customer Satisfaction 4.8 Stars or Higher On-Time Arrival 95%+ Close Rate Company Standard Callback Rate Less than 3% Revenue Per Ticket Meet Company Goals Safety Compliance 100% Truck Inventory Accuracy 95%+ Paperwork Completion 100% Photo Documentation 100% Attendance Excellent Required Equipment Technicians are expected to maintain: • Company service vehicle, • Company-issued tablet or mobile device, • Hand tools, • Power tools, • Drain cleaning equipment, • Sewer camera equipment (when assigned), • Personal Protective Equipment (PPE), • Company uniformsCore Values Every Eagle Plumbing technician is expected to demonstrate: Integrity We provide honest recommendations and never sell services customers do not need. Excellence We perform every repair to the highest professional standard. Professionalism We treat customers, coworkers, and their homes with respect. Accountability We take ownership of every job from start to finish. Safety We follow all company and OSHA safety procedures. Teamwork We support one another and communicate effectively. Continuous Improvement We are committed to learning new skills, technologies, and plumbing methods. What Success Looks Like A successful Service Plumber at Eagle Plumbing Repairs & Drain Cleaning: • Diagnoses plumbing problems accurately the first time., • Completes repairs safely and efficiently., • Delivers exceptional customer service on every call., • Communicates clearly with customers and dispatch., • Maintains a clean, organized service vehicle., • Completes all paperwork and documentation accurately., • Protects customers' homes and property., • Upholds the company's reputation through honesty, professionalism, and quality workmanship., • Helps the company grow by building lasting customer relationships and earning referrals.Why Join Eagle Plumbing Repairs & Drain Cleaning? At Eagle Plumbing Repairs & Drain Cleaning, we invest in our technicians' success. We offer a supportive team environment, ongoing technical and customer service training, modern equipment, advancement opportunities, competitive pay, performance incentives, and the opportunity to build a rewarding career while serving the Greater New Orleans community with integrity and excellence. By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

Job DescriptionDescription: The primary purpose of the plumber is to design, plan, construct, install and repair all phases of potable water, sanitary water, gas and storm drainage systems in a way that will ensure the health and safety of the building users. Duties and Accountabilities: • Install all plumbing systems and supports by using approved job drawings and manufacturer’s instructions., • Install lavatories, toilets, urinals, and cafeteria plumbing fixtures., • Install drinking fountains., • Install storm drainage systems., • Install sanitary sewer systems and potable water systems., • Practice on the job safety., • Identify obstructions to be avoided by inspecting structure., • Comply with federal, state, and local building and plumbing codes by enforcing adherence to requirements., • Keep plumbing equipment and tools operational by following manufacturer's instructions and established procedures., • Maintain safe and clean working environment by complying with procedures, rules, and regulations., • Be able to test all plumbing systems per job specifications.Requirements:, • Plumber’s License., • 5 years as a plumber preferred., • Knowledge of testing plumbing systems to identifying leaks., • Knowledge of basic safety, ADA Requirements, and state and local building / plumbing codes., • Ability to pvc, abs, no-hub, service weight, copper sweat, copper pro press systems pex pipe and victaulic piping systems., • Knowledge of city and national plumbing codes., • Ability to read and comprehend design drawings., • Ability to operate all types of plumbing equipment., • Ability to recognize and correct dangerous conditions related to gas-fired equipment., • Ability to use special tools and equipment. Equal Employment Opportunity Employer. It is the company’s policy to recruit, test, hire, promote, transfer, compensate, train, grant leave, and terminate based on merit and business needs, and without regard to race, creed, age, color, ancestry/national origin, sex, genetic information, pregnancy, marital status, religion, sexual orientation/sexual identity, disability, citizenship status, veteran status, or other basis prohibited by law. Positions require I-9 employment verifications and may require drug screening, background and MVR checks.

Job DescriptionDescription: The primary purpose of the plumber is to design, plan, construct, install and repair all phases of potable water, sanitary water, gas and storm drainage systems in a way that will ensure the health and safety of the building users. Duties and Accountabilities: • Install all plumbing systems and supports by using approved job drawings and manufacturer’s instructions., • Install lavatories, toilets, urinals, and cafeteria plumbing fixtures., • Install drinking fountains., • Install storm drainage systems., • Install sanitary sewer systems and potable water systems., • Practice on the job safety., • Identify obstructions to be avoided by inspecting structure., • Comply with federal, state, and local building and plumbing codes by enforcing adherence to requirements., • Keep plumbing equipment and tools operational by following manufacturer's instructions and established procedures., • Maintain safe and clean working environment by complying with procedures, rules, and regulations., • Be able to test all plumbing systems per job specifications.Requirements:, • Plumber’s License., • 5 years as a plumber preferred., • Knowledge of testing plumbing systems to identifying leaks., • Knowledge of basic safety, ADA Requirements, and state and local building / plumbing codes., • Ability to pvc, abs, no-hub, service weight, copper sweat, copper pro press systems pex pipe and victaulic piping systems., • Knowledge of city and national plumbing codes., • Ability to read and comprehend design drawings., • Ability to operate all types of plumbing equipment., • Ability to recognize and correct dangerous conditions related to gas-fired equipment., • Ability to use special tools and equipment. Equal Employment Opportunity Employer. It is the company’s policy to recruit, test, hire, promote, transfer, compensate, train, grant leave, and terminate based on merit and business needs, and without regard to race, creed, age, color, ancestry/national origin, sex, genetic information, pregnancy, marital status, religion, sexual orientation/sexual identity, disability, citizenship status, veteran status, or other basis prohibited by law. Positions require I-9 employment verifications and may require drug screening, background and MVR checks.

Job Description Enviremedial Services, Inc. is a fast-growing contractor seeking experienced, self-motivated, commercial service technicians with a great work ethic and drive to excel in this competitive and fast-paced industry. Leverage your current skills while developing new skills and join an incredible team. Are you tired of being on-call, working weekends, and holidays? Join our team and have a dependable schedule. Overnight travel is required for this position. We are currently seeking skilled Commercial HVAC Service Technicians with a minimum of 5 years of commercial HVAC service experience. The Commercial Service Technician is responsible for the installation, maintenance and repair of HVAC systems utilizing their knowledge of refrigeration theory, electrical schematics, pneumatics and electronic control systems, pipe fitting, welding/brazing and mechanical layouts. Technician will perform services on US ARMY & Marine Corps Reserve sites throughout Louisiana & Mississippi. Overnight Travel is required for this position. Company vehicle will be provided. A Note to U.S. Veterans:Experience gained through military service in mechanical, electrical, or maintenance roles is highly valued and may be considered equivalent to civilian trade experience. We welcome Veterans to apply and bring their mission-ready expertise to our team. Responsibilities: • Primary focus on chiller and boiler plants, • Responsible for servicing products and equipment on assigned projects, • Performs repairs, overhauls, and start-ups of commercial HVAC systems, • Uses a variety of hand tools, following blueprints, wiring diagrams, piping schemes or engineering specifications, to diagnose and repair units, • Performs preventative maintenance, troubleshooting and diagnostics, replacement, and modifications as needed, • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work as necessary., • Documents work by completing paperwork on each job and maintaining files., • Keeps current all manufacturers' products concerning installation, operation, maintenance, service, and repair, • Provides technical support to management, • Flexibility to work on other assigned tasks as required, such as kitchen equipment refrigerators/freezers, minor plumbing, minor electrical, etc. Requirements: • 5+ years of service experience, • HVAC trade school certification or apprenticeship program or an acceptable equivalent, • Valid driver's license with clean drivers record, • Must be able to pass Federal background Check and 10 Panel Pre-Employment Drug Screening, • EPA Approved Universal Technician Certification, • Low Voltage Electrical Certification preferred, • Veterans Encouraged to Apply: Enviremedial Services proudly supports our nation's Veterans and values the skills gained through military service. Relevant military experience may be considered equivalent to industry-specific experience, particularly in technical, leadership, or maintenance-related fields. We strongly encourage qualified Veterans to apply. Company Sponsored Benefits: • Enviremedial Services, Inc. is an Employee Owned Company. Often referred to as an ESOP, an ESOP is similar to a Profit Sharing Plan which allows the Sponsor to contribute not only cash, but also its own stock for the benefit of participating employees. ESI established the ESOP to enable employees to accumulate a beneficial ownership interest in the stock of ESI, which is not publicly traded, and to share in the potential growth and profits of ESI. Please note that the ESOP does not provide voting rights to any shares allocated to the employee., • Eligibility To become eligible to participate in the ESOP the employee must have attained the age of 21. An eligible employee who has worked at least 1,000 hours in a 12-month period beginning on their date of hire will become a "Participant" in the plan on the first January 1 or July 1 after the end of the 12-month period., • Vacation - Effective immediately, • 0-3 years of service: 80 Hours - 10 days each year, • 4-5 years of service: 96 Hours - 12 days each year, • 6+ years of service: 120 Hours - 15 days each year, • Sick Pay Max Accrual of 56 hours per year Accrual begins immediately upon hire., • Per Executive Order (EO) 13706 Employees will accrue (earn) not less than one (1) hour of paid sick leave for every thirty (30) hours worked on or in connection with a covered contract, up to a maximum of fifty-six (56) hours., • Twelve (12) Predetermined Holidays - Effective immediately, • ESI 401(k) Plan- 25% Discretionary Employer Match Effective after 90 days, • Health, Dental, Vision, Life, and Long Term Disability Insurance -Effective on the first of the month following 60 days of employment. Enviremedial Services Inc. Pays approximately 90% of Employee only coverage and competitive percentages of dependent coverage., • Immediately upon hire, a fringe benefit of $5.09 per hour (for all regular time up to 40 hours per week worked on SCA Contracts), will be paid into a 401(k) in your name. Once health insurance selections become effective the fringe benefit amount will change depending upon the level of insurance you select. Affirmative Action Statement: It is the policy of Enviremedial Services, Inc. to provide equal employment opportunities without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, genetic information or any other protected characteristic under applicable law. This policy relates to all phases of employment, including, but not limited to, recruiting, employment, placement, promotion, transfer, demotion, reduction of workforce and termination, rates of pay or other forms of compensation, selection for training, the use of all facilities, and participation in all company-sponsored employee activities. Provisions in applicable laws providing for bona fide occupational qualifications, business necessity or age limitations will be adhered to by the company where appropriate. Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Company truck, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Schedule: • Monday to Friday, • Overtime Supplemental Pay: • Overtime pay, • Signing bonus Work Location: On the road Enviremedial Services, Inc. is committed to maintaining the highest standards of safety and security for our employees, clients, and the communities we serve. In alignment with the requirements of our government contracts, all employees who work on these contracts must successfully undergo a background check and drug test.

Job DescriptionDescription: The purpose of this job description is to communicate the responsibilities and duties associated with the position of SERVICE TECHNICIAN. While the following information should be considered a comprehensive description of this position, it should also be noted that some responsibilities and duties may not be specifically addressed. Every person is expected to perform any reasonable task or request that is consistent with fulfilling company objectives. It is imperative that you review these duties, skills and physical requirements closely and that you understand that by signing the Job Description Acknowledgment, you are verifying that you can perform all the duties, have the skills and possess the physical abilities that are necessary to perform the job as described. JOB BRIEF: The SERVICE TECHNICIAN is to assist the maintenance supervisor in maintaining the physical integrity of the community. This involves insuring a safe, secure, and comfortable living environment for residents, visitors and staff. The SERVICE TECHNICIAN will carry out assigned duties in a safe manner and other duties as requested by the maintenance supervisor. In the absence of the maintenance supervisor, the SERVICE TECHNICIAN will assume all maintenance responsibilities. DUTIES AND RESPONSIBILITIES Conduct all business in accordance with company policies and procedures, state and federal laws; e.g., OSHA, ADA, Fair Housing, etc. PREVENTIVE MAINTENANCE/SAFETY • Must be knowledgeable of pertinent laws and EPA and OSHA regulations governing proper storage and management of hazardous materials, including solvents, flammables, caustics and freon., • Constantly be aware of the condition of apartment property throughout the community and immediately initiates action to correct unsafe conditions; e.g., broken gates leading to the pool, broken steps, open holes, broken/burned out exterior lights., • Schedules and performs routine preventive maintenance on all appropriate equipment as directed by senior maintenance technician and manager. Inspects and maintains all tools in excellent condition., • Be aware of all utility meter cut-offs, apartment and fixture cut-offs, sewer cleanouts., • Performs work area clean-up and safety related duties., • Ensures that storage areas remain locked when not in use. GENERAL • Diagnoses and performs minor and routine maintenance/repair, as directed, involving the following on a daily basis:, • Electrical and plumbing (including water lines)., • A/C and heating systems., • Appliances (when applicable)., • Water irrigation systems., • Stairs, gates, fences, patios, railings., • Tile, carpet, flooring., • Roofing, gutters, fasteners., • Interior/exterior lights., • Fireplaces, ceiling fans., • Gas fixtures and appliances (where applicable)., • Shutters, doors, cabinets, windows, sliding glass doors., • Boiler, gas and electric., • Door locks, P.O. boxes and locks., • Security systems (where applicable)., • Ceiling leaks., • Walls., • Pool areas, tile, jacuzzi, pool furniture., • Inspects and helps coordinate all needed make-ready repairs and services. Assists makeready staff as required to meet deadlines., • Reports all major repairs and need requisitions to senior maintenance technician and manager prior to any expenditure of funds, • Change locks and make keys., • Removes and transfers heavy appliances and equipment from storage area to apartment (or vise versa) as circumstances warrant. Assists in moving abandoned furniture, appliances, etc., to dumpster when necessary., • Be knowledgeable of inventory levels of spare parts and supplies and inform senior maintenance technician of shortages., • Assists in keeping grounds neat and free of litter. Rakes, sweeps, shovels as circumstances warrant., • Performs any additional duties assigned by senior maintenance technician and manager. Requirements: QUALIFICATIONS Position requires at least 2 year experience in apartment maintenance. High School Graduate or Equivalent Training (If not, must have 5 years maintenance experience.) Valid Driver’s License Knowledge of Basic Mechanical Concepts Heating and Air Conditioning and other State Regulated Certifications where required. Equipment Requirement: Required to wear back support belt, wear goggles when working with specific equipment, wear masks and gloves and other safety equipment as tasks dictate. Work Hours: 40 hours per week. Weekends as circumstances warrant; on-call on a rotating basis and for emergencies. Equipment/Machinery/Tools: An employee in this position must be knowledgeable and skilled in the safe use and maintenance of the following tools: Hand Tools Various wrenches, hammer, grips, saws, sledgehammer, snips, posthole diggers, etc. Power Tools Wrenches, grinders, sanders, drills, saws, etc. User-Moved Aids Wheelbarrows, dollies, hand trucks, buckets, hoists, jacks, step ladders, full ladders, double ladders. Mechanical Equip. Motors, pumps, compressors, blowers, electric and hand power augers, etc. Measuring Devices Calipers, voltmeters, ohmmeters, testing meters, PH tests, gauges, etc. Minimum Personal Tools Hammer, Screw Drivers (set), Socket Set, Wrenches (set), Pipe Required: Wrench, Circular Power Saw, Hand Saw, Acetylene Torch Kit, Drill, Allen Wrench Set, Tape Measure, Tool Box PHYSICAL REQUIREMENTS Bend/Stoop/Squat/Kneel Perform routine maintenance/repairs, pick up tools and needed equipment. Climb Stairs Service requests, make-ready needs for 2nd and 3rd floor apartments. Push or Pull Move equipment, appliances, open and close doors, etc. Reach Above Shoulder Perform routine maintenance/repairs, stock and remove equipment, parts, etc. Climb Ladders Perform routine maintenance/repairs. Grasp/Grip/Turning Handle tools and equipment perform routine maintenance/repairs. Finger Dexterity Handle tools and equipment, perform routine maintenance/repairs. Writing Inventory maintenance, requisition requests, required maintenance reports. Lifting/carrying (supplies, replacement parts, ladders, etc.): Over 150 lbs. Rare need (less than 1% of the time) 75 - 150 lbs. Occasional need (1% to 33% of the time) 25 - 75 lbs. Frequent need (33% to 66% of the time) 1 - 25 lbs. Constant need (66% to 100% of the time) NOTE: Lifting and carrying of weights exceeding 50 lbs. is often accomplished with assistance from one or more persons. Examples of heaviest items lifted include washer/dryers, refrigerators, A/C units, abandoned sofas, etc. VISION REQUIREMENTS Constant need (66% to 100% of the time) to document maintenance and complete forms, review manuals and operating instructions, read cautionary labels, respond to written instruction from staff and residents. Constant need to see small detail when performing routine maintenance duties. Frequent need (33% to 60% of the time) to see things clearly beyond arm's reach (oversee assistants, observe problems throughout the property). HEARING REQUIREMENTS Constant need (66% to 100% of the time) to communicate with assistants, resident staff, vendors and residents. Must use listening skills to diagnose needed repairs, etc. SPEAKING REQUIREMENTS Constant need (66% to 100% of the time) to verbally communicate with assistants, resident staff, vendors and residents. DRIVING/TRAVELING REQUIREMENTS Frequent need (33% to 66% of the time) to utilize personal transportation to pick up replacement parts and supplies from vendors. Rotation "on call" status may occasionally require expedient travel to assigned property at moments notice. Pick up and deliveries to the corporate office. Must have valid driver's license and automobile insurance coverage. WORKING ENVIRONMENT Indoors (66% to 100% of the time). Frequently outdoors (33% to 66% of the time), all conditions, often for extended periods. Occasional exposure (1% to 33% of time) to paint fumes, solvents, adhesives, etc. Example: Apartments during/after make-ready. Frequent need (33% to 66% of the time) to work in awkward and confining positions. REASONING DEVELOPMENT Moderate. Must be able to apply principles of logical thinking to a variety of practical situations and accurately follow standardized procedures that may occasionally involve minor deviations. Needs ability to think rationally beyond a specific set of instructions.

Job Description Steadfast Employment is hiring experienced plumbers for projects in the New Orleans area. If you have hands-on plumbing experience and take pride in quality work, we want to hear from you. A plumbing license is not required for this position. Responsibilities • Install, repair, and maintain plumbing systems, piping, fixtures, and related equipment., • Measure, cut, and assemble pipe using appropriate tools and materials., • Read blueprints and follow job specifications to complete plumbing installations., • Perform rough-in and finish plumbing work., • Identify leaks, blockages, and other plumbing issues., • Test completed work for leaks and proper operation., • Follow jobsite safety procedures and maintain a clean work area., • Work with supervisors and other trades to keep projects on schedule. Requirements • Previous hands-on plumbing experience., • Familiarity with plumbing materials, fittings, fixtures, and installation methods., • Ability to safely use plumbing hand and power tools., • Ability to follow directions and work independently on assigned tasks., • Reliable transportation and consistent attendance., • Ability to perform physical job duties, including standing, bending, climbing, and handling materials. Apply today to connect with our recruiting team and discuss your experience!

Job Description Licensed Plumber (Full-Time) Bertucci Bros Plumbing Pay: $26.00 – $38.00 per hour (based on experience) Schedule: 40–50 hours per week Location: In-person | Company vehicle provided Position Overview Bertucci Bros Plumbing is seeking a skilled, reliable, and experienced Licensed Plumber to join our growing team. This is a full-time, in-person role for a professional who takes pride in quality workmanship, values customer service, and is comfortable handling a wide range of residential and commercial plumbing projects. Key Responsibilities ● Perform general plumbing service, maintenance, and repair work ● Complete sewer repairs, trenching, and piping installations ● Execute gas line repairs and installations in compliance with safety standards ● Support remodeling and renovation projects ● Accurately diagnose plumbing issues and recommend solutions ● Maintain organized and detailed invoices and job documentation ● Deliver excellent customer service while representing Bertucci Brothers Plumbing professionally ● Operate company vehicles safely and responsibly Qualifications & Requirements ● Minimum of 4 years of plumbing experience ● Active Plumbing License (required) ● Valid driver’s license with a clean driving record ● Ability to provide and maintain required hand tools ● Strong knowledge of plumbing systems, materials, and safety standards ● Dependable, organized, and detail-oriented ● Comfortable working independently and as part of a team Skills & Competencies ● Pipe installation and system repairs ● Renovation and installation project support ● Strong written communication (invoicing and documentation) ● Customer-focused mindset ● Safe and professional driving practices Benefits ● Competitive hourly pay with growth potential ● Company vehicle provided ● Pay incentives based on performance ● Paid time off (PTO) ● 401(k) with company matching ● Health, dental, and vision insurance ● Life insurance \nCompany Description Affordable, reliable, and honest is what you can expect from us at Bertucci Bros Plumbing. We're family owned and operated, located in Metairie, Louisiana. With low overhead, highly trained mechanics, and effective plumbing solutions, Bertucci Bros Plumbing guarantees to get the job done right for less then their competition. Affordable, reliable, and honest is what you can expect from us at Bertucci Bros Plumbing. We're family owned and operated, located in Metairie, Louisiana. With low overhead, highly trained mechanics, and effective plumbing solutions, Bertucci Bros Plumbing guarantees to get the job done right for less then their competition.\r\n

Job Description Commercial Plumbers Needed – Immediate Openings We're hiring several experienced Commercial Plumbers for multiple commercial construction projects in and near Luling / Mobile / Metairie / New Orleans. This is a long-term project, going into the new year. Qualifications • 4–5+ years of commercial plumbing experience., • LA licensed plumbers preferred, • Will consider plumbers without license, • Experience with copper, cast iron, PVC, pex and some screw pipe, • ProPress, soldering, and brazing., • Complete underground and above-ground rough-in installations., • Hang and string pipe, • Read and interpret blueprints, specs and plumbing drawings, • Med Gas exp desired Requirements • Experienced with all phases of the job rough in, top our, finishing., • Ability to work independently and as part of a team., • Commitment to quality workmanship and jobsite safety., • Ensure all work complies with local plumbing codes and jobsite safety standards., • Have an OSHA 10 or 30 (we can assist if you don't have), • Must have traditional hand tools. Corded power tools provided onsite., • PPE: vests, hard hats, glasses and gloves provided onsite, • Ability to pass background and drug testing. What We Offer • Competitive pay based on experience., • Overtime opportunities., • Benefits (medical/dental, etc.), • Long-term work with an established contractor. **If you're an experienced commercial plumber looking for steady work and competitive pay, we'd like to hear from you. Apply today! \nCompany Description For more than 20 years, Tradeco Construction has been a trusted workforce partner to leading mechanical, electrical, and plumbing contractors across the country. Our reputation is built on providing dependable, safety-focused, highly skilled tradespeople who take pride in doing quality work every day. At Tradeco, we believe great companies are built by great people. From our trades people to our managers and leadership team, we are committed to creating a professional, positive, and respectful work environment where every employee is valued. When you join Tradeco, you become part of an organization that appreciates your skills, supports your success, and treats you with the professionalism and respect you deserve. Come experience what it means to work for a company that truly cares about its people. For more than 20 years, Tradeco Construction has been a trusted workforce partner to leading mechanical, electrical, and plumbing contractors across the country. Our reputation is built on providing dependable, safety-focused, highly skilled tradespeople who take pride in doing quality work every day.\r\n\r\nAt Tradeco, we believe great companies are built by great people. From our trades people to our managers and leadership team, we are committed to creating a professional, positive, and respectful work environment where every employee is valued.\r\n\r\nWhen you join Tradeco, you become part of an organization that appreciates your skills, supports your success, and treats you with the professionalism and respect you deserve. Come experience what it means to work for a company that truly cares about its people.

Job Description Year-round work. Use your plumbing experience in a hands-on role supporting construction, installation, repair, and maintenance projects. • Perform plumbing work on piping, fixtures, water, drainage, sewer, heating, and related systems., • Follow blueprints, specifications, codes, and jobsite instructions to complete safe, accurate work., • Bring practical trade experience, strong attention to detail, and a commitment to quality craftsmanship., • Plumbing Certification Preferred but not Required., • Comprehensive benefits package offered. What You’ll Do • Assemble pipe sections, tubing, fittings, valves, appliances, and fixtures using approved joining methods and equipment., • Measure, cut, thread, bend, install, and anchor pipe assemblies using the proper tools, machines, and supports., • Review blueprints, specifications, and codes to determine layouts, materials, and installation steps., • Locate and mark pipe installations, connections, fixture placements, passage holes, and obstructions using measuring tools and levels., • Fill pipes or fixtures with water or air, monitor pressure gauges, and test systems to detect and locate leaks., • Maintain and repair plumbing systems by replacing defective parts, repairing broken pipes, clearing drains, and restoring proper function., • Install underground storm, sanitary, sewer, and water piping systems as needed to connect plumbing fixtures and systems., • Keep records of work assignments and support project planning by estimating time, materials, and labor needs when required., • Direct helpers or support team members during pipe cutting, preassembly, installation, and related plumbing tasks. Skills and Experience That Help You Succeed We’re looking for applicants who can work independently or with a crew, solve job-site problems, and complete assigned work safely and correctly. • Ability to read blueprints, specifications, technical drawings, tape measures, and jobsite instructions., • Knowledge of basic plumbing techniques, building regulations, safety procedures, and construction standards., • Experience using pipe cutters, threading machines, bending machines, pressure gauges, and related plumbing equipment., • Ability to solder, braze, weld, or use related equipment when required for the job., • Strong attention to detail when measuring, fitting, testing, and inspecting completed work., • Ability to determine tools, materials, methods, repairs, and installation steps needed for assigned work.\nCompany Description RMS offers extensive mechanical and plumbing services for new construction, renovations, additions, and retrofits. Our experienced staff is well versed in preconstruction, value engineering, design, fabrication, construction, and safety, which allows our company to meet the strict demands of any commercial project. RMS offers extensive mechanical and plumbing services for new construction, renovations, additions, and retrofits. Our experienced staff is well versed in preconstruction, value engineering, design, fabrication, construction, and safety, which allows our company to meet the strict demands of any commercial project.

Job DescriptionCivil Construction Laborer Utility & General Infrastructure Job Summary We are seeking dependable and hardworkingCivil Construction Laborers to assist with utility, pipeline, water main, and general infrastructure construction projects. This position involves hands-on physical labor, working around heavy equipment, assisting utility and pipe crews, preparing job sites, handling construction materials, and restoring work areas after installation or repair work is completed. Candidates must be safety-focused, reliable, able to follow directions, and comfortable working outdoors in various weather conditions. Key Responsibilities • Hand-dig trenches and excavation areas around existing underground utilities, pipelines, water mains, and electrical conduits., • Assist with trench grading, shoring, backfilling, and soil compaction., • Clear debris and other obstacles from construction sites., • Set up barricades, warning signs, and traffic-control devices as required., • Load, unload, move, and properly store construction materials such as pipe, fittings, gravel, concrete, and other infrastructure materials., • Safely operate common hand and power tools, including:, • Jackhammers, • Pneumatic tampers, • Pipe saws, • Trench compactors, • Shovels and other hand tools, • Assist pipe and utility crews with guiding, aligning, positioning, and securing pipe and structural components., • Work safely around excavators, backhoes, dump trucks, loaders, and other heavy construction equipment., • Backfill trenches and compact soil according to project requirements., • Assist with basic asphalt, concrete, and surface restoration., • Maintain a clean and organized work area., • Follow all company, client, OSHA, and job-site safety procedures., • Wear required Personal Protective Equipment (PPE) at all times., • Perform additional construction labor duties as assigned by supervisors.Must Have, • Previous experience performing physical labor in acivil construction, utility, pipeline, underground construction, or similar environment., • Experience working safely around heavy equipment such as excavators, backhoes, loaders, and dump trucks., • Ability to lift and carry up to50 pounds regularly., • Ability to perform repetitive physical tasks including digging, lifting, bending, climbing, standing, and walking for extended periods., • Ability to work outdoors in heat, cold, rain, and other changing weather conditions., • Ability to follow verbal instructions and communicate effectively in an active and sometimes loud construction environment., • Strong understanding of basic job-site safety procedures., • Willingness to wear all required PPE., • Reliable transportation and dependable attendance., • Valid driver's license., • Ability to work overtime or extended hours when required.Preferred, • OSHA 10-Hour Construction Safety Certification., • Previous underground utility construction experience., • Experience working around water mains, sewer lines, drainage systems, pipelines, or electrical conduit installations., • Experience with trenching, shoring, excavation, backfilling, and compaction., • Experience using jackhammers, pneumatic tampers, compactors, pipe saws, and similar construction tools., • Traffic-control or flagging experience., • Basic asphalt or concrete restoration experience., • Experience assisting pipefitters, pipelayers, or utility installation crews.Screening Questions 1. How many years of experience do you have working in civil construction, underground utilities, pipeline work, or general infrastructure construction?, 2. Do you have experience working around excavators, backhoes, loaders, dump trucks, or other heavy construction equipment? If yes, briefly describe your experience., 3. Have you performed trenching, hand digging, backfilling, grading, or soil compaction on previous construction projects?, 4. Which construction tools have you operated? Select or describe any that apply, including jackhammers, pneumatic tampers, trench compactors, pipe saws, or similar equipment., 5. Do you currently have a valid driver's license and reliable transportation to report to job sites as scheduled?, 6. Are you able to regularly lift up to 50 pounds, perform strenuous outdoor labor, work in changing weather conditions, and work overtime or extended hours when required?

Job Description Position: Marine Field Manager Job Location: Harahan, LA Hutco Branch: Harvey, LA Rate of Pay: $85k yearly (Based on experience) The Hiller Companies, LLC has an immediate opening for Marine Field Manager. If you are a dedicated professional with a passion for fire protection and safety, we invite you to apply today. The Hiller Companies is a leading provider of fire protection and safety solutions, dedicated to safeguarding lives and property all around the world. Headquartered in Mobile, Alabama, Hiller extends its reach globally as well as in domestic markets with offices across the United States. With over 100 years in the industry, our mission is to ensure the highest standard of safety and innovation in comprehensive fire protection services, including installation, inspection, maintenance and repair of critical fire and life safety equipment. Our team remains laser-focused on one goal - making the world a safer place. Job Summary: The Marine Field Manager oversees and manages the field operations for the marine installation department. This position is responsible for supervising and directing operations within the piping discipline, coordinating projects, performing quality control and safety checks to adhere to compliance regulations and ensure the field operations team collaborates with other departments to achieve operations success. Job Responsibilities • Schedule manpower, material, and equipment for construction projects in a shipyard environment., • Review project hours and provide status updates of project information, • Request Material quotes for requisitions, order material, generate hand take off as necessary., • Manage project costs to maintain profitability., • Schedule and attend AHJ Inspections. This includes pressure testing and final inspections., • Plan and schedule training sessions for installation technicians to enhance their skills and knowledge., • Communicate daily with the installation technicians to ensure project(s) progress and address any issues promptly., • Communicate project status with Marine Install Manager., • Support monthly project reviews with department leadership and accounting to assess project performance and recommendations for improvement as needed., • Attend weekly construction kick-off meetings., • Ensure installation technicians comply with all safety procedures., • Conduct safety audits to identify potential hazards and make recommendations for corrective actions to maintain a safe work environment., • Ensure all installations meet all code and regulatory requirements. Make recommendations for improvement as needed., • Collaborate with leadership to conduct job walks with the sales team to assess project requirements and provide accurate cost estimates for quotes., • Collaborate with the Design department by conducting flow tests and surveys to support project planning and execution., • Other duties as assigned. Location(s) 401 COMMERCE PT, HARAHAN, Louisiana 70123-3201, United States Requirements What We Are Looking For: • High school diploma is required, • Must have a minimum of 5 years experience in a wide range of different types of piping installation., • Previous experience in a managerial or supervisory role is highly desired., • In-depth knowledge of pipefitting and pipe welding processes and procedures., • Experience developing pneumatic and hydrotest packages in addition to verifying and witnessing acceptance of tests., • Basic computer and software skills to include the use of word processing, e-mail, spreadsheets and electronic presentation programs., • Thorough understanding of safety regulations and the ability to enforce safety procedures to maintain a safe work environment., • Must have problem-solving skills with the ability to identify issues and propose necessary solutions., • Ability to review designs for constructability and identify potential challenges. Physical Requirements: • Sitting and /or standing for long periods of time., • Ability to drive a vehicle to jobsites.

Job Description Heavy Equipment Operator – Utility Work Pipeline Services Inc. is seeking a new team member to be the heavy equipment operator for one of our crews. Enjoy working in a small company environment. Benefits: • Competitive Wage. Compensation depends on experience., • Simple IRA with Company Match. Job Duties: • Safely operate various sizes of excavators for the installation of underground utilities (Water / Sewer / Drainage). • Must be able to maintain proper grade of the pipe trench., • Occasionally will be required to operate a skid steer loader., • Perform daily maintenance and inspection of all equipment., • Perform other duties on the jobsite when not operating equipment., • Exercise safe working practices including use of proper PPE at all times., • Reports directly to the Crew Foreman., • Typical work hours are Monday – Friday from 7:00 a.m. – 3:30 p.m. with a 30- minute lunch. Some weekend work may be necessary. Requirements: • Must have a minimum 3 years of experience operating an excavator., • Must have experience operating around existing utilities., • Must have experience benching and sloping trenches and working with trench boxes. • Understanding of elevations, slopes and basic mathematical equations., • Must have knowledge of typical sewer, water and drainage material and installation methods. • Must have a Valid Driver’s License with clean driving record and experience towing equipment / tool trailers. • Must have consistent and reliable transportation to and from the jobsites. Most job sites are located in and around the greater New Orleans area. • Must have and wear proper PPE (Hard hat, Safety Vest and Work Boots)., • Ability to individually lift and carry weights up to 80 lbs., • Must work and communicate well with other members of the crew., • Must be able to understand and follow directions., • Ability to work without conflict alongside other trades on jobsites., • Ability to work outdoors in extreme/dirty conditions., • Maintain a clean and safe work area., • Must be able to read, write, speak and understand English., • May provide guidance to and oversee work of other crew member \nCompany Description Since its inception in 1983 by Byron Bordelon III, Pipeline Services, Inc., has been involved in the construction of water distribution systems, sanitary sewer collection systems, and storm sewer collection systems throughout the Greater New Orleans metropolitan area. Our clients include municipalities, private developers, general contractors and plumbing contractors. Project sizes range from $10,000 to $1,000,000. Since its inception in 1983 by Byron Bordelon III, Pipeline Services, Inc., has been involved in the construction of water distribution systems, sanitary sewer collection systems, and storm sewer collection systems throughout the Greater New Orleans metropolitan area. Our clients include municipalities, private developers, general contractors and plumbing contractors. Project sizes range from $10,000 to $1,000,000.

Job DescriptionCompany Description Job Description Required Qualification: Masters Degree in Civil or Structural Engineering and 10 years of experience or a Bachelor’s Degree in Civil Engineering and 15 years of experience Professional Engineer registration/licensure Pass a background check required for PIV badging Possess a valid driver’s license. Preferred Qualifications: Engineering/Design experience in oil and gas Required Responsibilities include: Serves as the lead civil engineer -of-record responsible for oil and gas design packages including the development of civil/structural engineering specifications and civil/structural drawings. Prepare technical designs with other members of a multidiscipline team in compliance with established design criteria, industry codes, environmental guidelines, client specifications, and quality assurance program. Understand, develop, and review project drawings, calculations, specifications, and other engineering deliverables that are driven by the project or client. Engineering, design and certification of foundations for large equipment with associated access platforms, pipe supports, roads, etc. is the primary function of this position. Field verification, condition assessment, and inspections will be conducted as needed to further the design. Assist in preparing cost estimates. Review contractor submittals and RFIs; perform technical evaluations of vendor proposals. Reviews plans, specifications and other documents to identify discrepancies, code violations, improper materials or techniques, and substandard or poor-quality workmanship. Attends weekly meetings to update the client on project status, schedule, discuss problems, and resolve issues. Required Skills Must be able to communicate fluently in English. Must be proficient with AutoCAD, Civil 3D, Revit, and Bluebeam Software. Efficient use of the Microsoft Suite of Services, including SharePoint, Teams, Word, Outlook, and Excel skills. Deliver contract requirements in a timely manner. Must be able to work in all weather conditions, wear appropriate Personal Protective Equipment, walk long distances, stand for long periods, lift construction materials to access inspections, climb ladders and scaffolding, navigate typical civil construction site obstacles, and drive site provided utility vehicles. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Provide on-site telecommunication technical support mission from 0700-1600 Monday through Friday. This will be a 40 hour per week requirement excluding government holidays. The list of essential functions, as outlined herein, is intended to be, but shall not be limited to, the telecommunications support services to be performed by the technician. The OSP Technician provides support engineering services through the highly detailed collection of information from the job site. This position requires a working level of knowledge in all technical aspects of OSP (Outside Plant) fiber and copper networks. The Technician is responsible for identifying the existing field design and layout of the OSP telecommunications network, including aerial, buried, and underground fiber network design and layout, underground conduit, manhole/handhole, building entrance, and riser facilities. Technician required under this tasking will be involved with the administrative and telecommunication support services to the base and tenant commands and perform system translations to the communications systems previously mentioned. The Technician must have 5+ years of experience in fiber-optic/telecommunications/telecom construction industry, knowledge of outside plant activities (Fiber Cable Design, Pole Line Construction, Conduit System design), ability to read and understand as build prints, and be able to identify conflicts with existing outside plant facilities, select routing of lines and equipment required for projects, familiar with GIS (Geographic Information Systems), ESRI, and Shapefile functionality, experience with IKE data collection tool, understanding of National Electric Safety Code and knowledge of OSP construction and engineering techniques, experienced in the use of Microsoft Office Suite and Google Earth, working knowledge of AutoCAD. • Install, test and repair aerial, underground, fiber and copper routes (Cable Splicer/Repair Fiber and Copper)., • Familiar with copper telephone cable design including size and gauge, cross box design and terminals; rearrangements including cutovers, pair conditioning, cable assignments, loop make ups, bridge taps, how to interpret splice documents., • Manage all OSP projects to meet Space and Naval Warfare Systems Command Shore Installations Process Handbook guidelines., • Maintain a high level of productivity, assuring time-frames are met for projects occurring simultaneously and track and generate reports on project status., • Prepare, manage and maintain project documentation, maps and CAD drawings. Create drawings and records of fiber and copper routes, splice locate, construction notes, bills of materials and project overviews. Perform OSP surveys to support construction projects via the COR on-site Government representative., • Research and acquire permits, rights of way and easement agreements., • Respond to BCO requests for information and plan for facility relocations., • Review and record As-Built documentation. Submit all drawings and record via the COR on-site Government representative., • Attend customer meetings; perform site surveys and walk-outs as necessary to comply with customer requirements and time frames., • Work with multiple customers and prepare all deliverables within each customer’s own specifications., • Proficient with fiber/copper test equipment and provide test results in an electronic form. Experience and knowledge using OTDR/TDR and Fusion splicing machines in addition to all other commonly used tools and test equipment., • Perform work such as digging holes, placing cable in existing infrastructure (maintenance, • holes/conduits), air pipe and inner duct in various types of existing conduit systems. m. Work with power equipment and small tools in the installation, repair and maintenance of outside plant facilities (copper and fiber)., • Install cable terminations in existing telecommunications closets by mounting and installing backboards, cross connects, racks, patch panels, for fiber optic and copper. Install grounding for racks, equipment and cable as required., • Perform inventory of both fiber strand and copper cable pair assignment in each building. Findings shall be documented in the CAIRS system., • Work in all weather conditions and confined spaces. Work construction in a physically demanding atmosphere including, but is not limited to: carry, raise and climb a ladder, carry, lift and handle heavy equipment (manhole covers, cable reels)., • Perform maintenance on maintenance holes and possess Occupational Safety and Health Administration (OSHA) Confined Space Entry Training Certification.Locate Outside Plant, both fiber and copper, utilizing Contractor provided both orange fluorescent flags and paint., • Possess five (5) years of experience in installation, repair and maintenance of telecommunications outside plant facilities., • During emergencies and special projects assist at the BCO Gulfport, MS.\nCompany Description 3LINKS Technologies, Inc. is a graduated 8 (a), Service Disabled Veteran Owned (SDVOB) certified and capitalized Small Disadvantaged Business (SDB) with a Top Secret Facility Clearance. We specialize in design, management, installation, repair, and maintenance of telecommunications, audio visual resources, and video teleconferencing with strong past performances in Telephony, Information Technology and Information Management (IT/IM), to include help desk operations. Moreover, 3LINKS specializes in design, management, installation, repair, and maintenance of telecommunications, IT, audio visual resources, and video teleconferencing with a strong past performance in Telecom/IT call center and help desk management. 3LINKS corporate team is composed of prior Military and DoD managers and technicians with a host of past customers and current clients to include USAF, USN, USA, DoD Pentagon, US/EPA, NRC and US State Dept. Our corporate managers include training certifications under BICSI, PMP, CISSP, RCDD and ITIL as well as several IT related certs. Our offices are located at 8701 Georgia Ave - Suite 705, Silver Spring, MD 20910. OUR MISSION The 3LINKS TECHNOLOGIES INCORPORATED (3LINKS) mission is to provide a one-stop source for core business services that include telecommunications, video teleconferencing, information technology, audiovisual and photography, management support, and administrative support. OUR VALUES Quality is not optional Efficiency is expected Integrity is never compromised Determined to succeed OUR VISION 3LINKS strives to exceed customer expectations by providing the highest quality customer service and sound technical solutions. OUR CORE BUSINESS SERVICES ARE Telecommunication Support Services Information Technology Support Services Secure and Non-Secure Video Teleconferencing Services Audio/Visual/Photography Services Management Services Administrative Support Services 3LINKS Technologies, Inc. is a graduated 8 (a), Service Disabled Veteran Owned (SDVOB) certified and capitalized Small Disadvantaged Business (SDB) with a Top Secret Facility Clearance. We specialize in design, management, installation, repair, and maintenance of telecommunications, audio visual resources, and video teleconferencing with strong past performances in Telephony, Information Technology and Information Management (IT/IM), to include help desk operations. Moreover, 3LINKS specializes in design, management, installation, repair, and maintenance of telecommunications, IT, audio visual resources, and video teleconferencing with a strong past performance in Telecom/IT call center and help desk management. 3LINKS corporate team is composed of prior Military and DoD managers and technicians with a host of past customers and current clients to include USAF, USN, USA, DoD Pentagon, US/EPA, NRC and US State Dept. Our corporate managers include training certifications under BICSI, PMP, CISSP, RCDD and ITIL as well as several IT related certs.\r\n\r\nOur offices are located at 8701 Georgia Ave - Suite 705, Silver Spring, MD 20910.\r\n\r\nOUR MISSION \r\nThe 3LINKS TECHNOLOGIES INCORPORATED (3LINKS) mission is to provide a one-stop source for core business services that include telecommunications, video teleconferencing, information technology, audiovisual and photography, management support, and administrative support. \r\nOUR VALUES \r\nQuality is not optional \r\nEfficiency is expected \r\nIntegrity is never compromised \r\nDetermined to succeed\r\n\r\nOUR VISION \r\n3LINKS strives to exceed customer expectations by providing the highest quality customer service and sound technical solutions. \r\n\r\nOUR CORE BUSINESS SERVICES ARE\r\nTelecommunication Support Services\r\nInformation Technology Support Services\r\nSecure and Non-Secure Video Teleconferencing Services\r\nAudio/Visual/Photography Services\r\nManagement Services\r\nAdministrative Support Services

Job Description ABOUT THE ROLE The Mechanical Systems Expert is Managed Services' expert embedded in a data center build - supporting design review and commissioning to ensure cooling systems are operable and maintainable at turnover. Every design decision eventually becomes someone's 3 a.m. problem; this role reviews the design and witnesses the testing on behalf of that person. Some of the key responsibilities you should expect are the following: Operability Design Review Review mechanical and cooling designs - chilled water plants, air and liquid cooling systems, CDUs, CRAHs, heat rejection, water treatment - through an operations lens: maintenance access and laydown, isolation and redundancy behavior, degraded-mode operation, instrumentation adequacy, and failure-mode consequences. File review comments that change designs, not just document concerns. Construction-Phase Verification Walk mechanical installations at key milestones: pipe routing and support, valve access, equipment clearances, insulation quality, and cleanliness/flushing protocol compliance - catching operability problems while they're still cheap to fix. Commissioning Witness Witness Level 3-5 commissioning of mechanical systems: functional performance tests, staging and failover sequences, failure scenarios, and integrated systems testing. Drive operational issues into the Cx log with clear acceptance criteria and verify closure personally. Turnover Readiness Verify mechanical turnover packages: O&Ms, as-builts, valve tags and system labeling, water treatment baselines, spare parts and consumables lists, and PM program inputs (frequencies, procedures, vendor contacts). Validate training actually equips operators to run the plant. Operations Transition Support Support early operations stabilization post-turnover: alarm tuning input, setpoint refinement, and first-months troubleshooting alongside the operations team. Program Feedback Feed operational lessons into Hut 8 mechanical design standards and the next project's basis of design. ABOUT YOU What we're looking for: • 8+ years in critical facilities mechanical operations, commissioning, or chief-engineer-track roles., • Deep hands-on knowledge of chilled water plants, hydronic systems, and data center cooling topologies - air-cooled, water-cooled, and liquid/direct-to-chip., • Level 1-5 commissioning fluency from the witness/operations side, including integrated systems testing., • Sharp eye for maintainability in design reviews: access, isolation, and instrumentation gaps., • Turnover documentation rigor - you read the O&M before signing for it., • Comfortable embedded with a construction team while holding the operations line., • Water treatment and cleanliness protocol experience for critical hydronic systems., • CFC/EPA certifications, trade licensure, or engineering degree all welcome paths. ABOUT THE WORK ENVIRONMENT • Full time on-site role.

Job DescriptionMust be willing to travel/temporarily relocate to the following locations: • Pascagoula, MS., • Lockport, LA., • Houma, LA. AAA USA is actively hiring experienced Pipe Fitters to support major shipbuilding, marine construction, repair, and maintenance programs in Multiple Locations. We are seeking skilled marine professionals with experience fabricating, installing, modifying, and repairing piping systems aboard vessels and in shipyard environments. This is an excellent opportunity to join a long-term marine program offering competitive pay, overtime opportunities, relocation assistance, and career growth within the marine industry. Why Marine Professionals Choose AAA USA: • Competitive Pay., • Overtime Opportunities., • Long-Term Marine Programs., • Relocation Assistance Available., • Referral Programs., • Medical, Dental & Vision Benefits., • 401(k) with Company Match., • Paid Time Off & Paid Holidays. Essential Functions: • Fabricate, assemble, install, modify, and repair marine piping systems in accordance with engineering drawings and customer specifications., • Read and interpret blueprints, schematics, isometric drawings, and technical work instructions., • Measure, cut, bevel, thread, bend, and fit pipe to required dimensions and tolerances., • Align, position, and secure piping systems and components for installation aboard marine vessels., • Perform inspections of piping systems to verify proper fit, alignment, and compliance with quality standards., • Repair, modify, and replace existing piping systems as required during shipbuilding and vessel repair projects., • Work safely in confined spaces, at heights, and in physically demanding shipyard environments., • Collaborate with welders, supervisors, and other trades to support production schedules and project milestones., • Maintain compliance with all company safety policies, quality standards, and shipyard procedures. Requirements: • Experience as a Pipe Fitter in shipbuilding, marine, industrial, or heavy construction environments., • Ability to read and interpret blueprints, schematics, isometric drawings, and technical documentation., • Experience measuring, cutting, threading, bending, fitting, and installing pipe., • Knowledge of pipe materials, fittings, valves, and marine piping installation techniques., • Strong understanding of shipyard safety practices and workplace safety standards., • Ability to work in confined spaces, at heights, and in varying weather conditions., • Basic math, mechanical aptitude, and problem-solving skills., • Ability to work independently and as part of a team., • Must be eligible to work in the United States.

Job Description The Pipelayer is responsible for laying and joining concrete, plastic, or cast-iron pipe for drains, sewers, and water mains. This includes rigging pipe for hoisting, setting pipe to grade and affixing the pipe joint. Also responsible for preparing and grading the trenches either manually or by communicating with onsite equipment operators. This position requires manual labor as well as assisting other trades to the extent necessary with hands-on work. Experience/Pre Employment qualifications: Minimum 3 years’ experience in underground pipelaying. Must be able to pass a drug test and applicable pre-employment screenings.

Job Description ???? Build America’s Marine Backbone – Join Legacy Industries as a 1st Class Ship Fitters / Structural Fitters Today! ???? Position Title: 1st Class Ship Fitters / Structural Fitters Company Name: Legacy Industries Pay Range: $26–$28+ per hour (based on experience) Industry: Marine / Coastal Construction (Commercial, Industrial, Government or Federal) Location: LA Job Overview Legacy Industries is seeking 12 skilled 1st Class Ship Fitters / Structural Fitters to join our Field Operations team. In this full-time role, you will be responsible for fitting and assembling steel structures on marine vessels including tugboats, push boats, and small barges. You’ll perform project preparation, steel layout and fitting, and hands-on fabrication and welding of structural components. If you have a passion for marine construction and hands-on steel work, this is your opportunity to thrive in a dynamic shipyard environment where your craftsmanship supports the future of commercial, industrial, and federal marine projects. Who We Are At Legacy Industries, we specialize in marine and coastal construction, serving a diverse portfolio of commercial, industrial, and federal clients. Located at the intersection of innovation and tradition, we deliver high-quality craftsmanship in shipbuilding and vessel repair. We are a family-oriented company that values dedication, safety, and professional development. Our team members are more than just employees—they’re the legacy we build together. Learn more at www.legacyindustries.net. Key Responsibilities • Fit and assemble steel structures for marine vessels, • Lay out and fabricate steel components to specification, • Burn, wash, and bevel steel with hand torches, • Read and interpret blueprints and construction specifications, • Measure, cut, and install structural plate, pipe, beams, and related components, • Conduct quality inspections on assembled parts, • Adhere strictly to safety and quality standards on siteQualifications, • 1+ years of shipyard, marine structural fitting, structural steel fitting, barge repair, vessel fabrication, or closely related heavy fabrication experience., • Understanding of shipyard terminology and vessel structure, • Skilled in burning, beveling, and steel fabrication using hand torches, • Ability to read and interpret blueprints and technical drawings, • Must pass a drug test and physical, • No formal education or certifications required; skills will be tested onsiteBenefits, • Weekly Pay Cycle, • Medical, Dental, and Vision Insurance, • Life and Disability Insurance Options, • Paid Time Off ( Holidays), • Referral Bonus Program, • Paid Training and Certifications, • Safety Equipment Provided, • Personal Tool Replacement Program, • Ample Overtime OpportunitiesWork Schedule, • Full-Time, • Monday to Friday, • Weekend availability and overtime requiredWork Location, • Onsite – Legacy Industries, Marine ShipyardEqual Employment Opportunity Legacy Industries is an equal opportunity employer. We value diversity and are committed to creating an inclusive environment for all employees. We encourage applicants from all backgrounds to apply.

Job DescriptionMust be willing to travel/temporarily relocate to the following locations: • Pascagoula, MS., • Lockport, LA., • Houma, LA. Why Skilled Trades Professionals Choose AAA USA: • Competitive Pay., • Overtime Opportunities., • Long-Term Assignments., • Multiple U.S. Locations., • Relocation Assistance Available., • Referral Programs., • Medical, Dental & Vision Benefits., • 401(k) with Company Match., • Paid Time Off & Paid Holidays. The Marine Pipe Welder is responsible for performing high-quality welds on pipes and related components aboard vessels, in accordance with shipbuilding standards and specifications. Essential Functions: • Perform TIG, MIG, and/or stick welding on carbon steel, stainless steel, and other alloy pipes., • Read and interpret blueprints, isometric drawings, and welding symbols., • Prepare and set up pipe and pipe fittings for welding., • Conduct visual and dimensional inspections of welds to ensure quality and adherence to standards., • Work in confined spaces, elevated surfaces, and various positions (vertical, horizontal, overhead)., • Follow safety protocols and company procedures., • Assist with fitting, cutting, and prepping pipe materials as needed., • Maintain tools and equipment in proper working condition. Requirements: • Minimum 3 years of pipe welding experience in a shipyard or industrial setting., • Ability to pass welding tests in accordance with ABS, NAVSEA, or USCG standards., • Familiarity with carbon steel, copper-nickel, and stainless pipe., • Must be able to work from ladders, scaffolding, and in tight spaces.

Job Description Scope and Purpose The basic function of the position is to lay out, align, and assemble raw metal materials into finished structural frameworks. Responsibilities • Selects type and size of materials and equipment according to specifications, • Inspects work site to determine presence of obstructions, • Plans installation or repair to avoid obstructions and to avoid interfering with activities of other workers, • Prepares materials by cutting, contouring, and beveling metal using saws, shears, or torches, • Cuts, threads, and bend pipe, • Assembles and installs variety of metal and nonmetal pipes, tubes, fittings, and fabricated parts before final welding or riveting, • Connects pipe and parts using threaded, caulked, soldered, brazed, or fused joints, • Installs and maintains compressors, pumps, meters, pneumatic and hydraulic controls and piping, • Welds pipe supports to structural steel members, • Verifying dimensions and tolerances using precision measuring instruments (calipers, squares, rulers) to ensure alignment with design specifications, • Observes production machines in assigned area of manufacturing facility to deduct machinery malfunctions, • Operates machinery to verify repair, • Adhering strictly to workplace safety regulations, which requires using proper PPE and working safely at varying heights or confined spaces Organization Relationships Regardless of other duties, has a responsibility to follow Morrison's production, safety, and quality procedures Requirements • Required - High School Diploma or equivalent, • Training - TWIC, Safegulf, Rigger, First Aid and CPR, Water Survival, • Other - Must be able to read blue prints

Churchill Downs - - Responsibilities: Inspect building plans and determine work aids; locate pipe positions; cut openings; install pipes and fixtures; test for leaks.

Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision and resilience required in rapidly expanding industries such as data centers, healthcare, pharmaceuticals, advanced manufacturing, and higher education. For more than 140 years, Johnson Controls has delivered performance where it really matters. Backed by advanced technology, lifecycle services and an industry-leading field organization, we elevate customer performance, turn goals into real-world results and help move society forward. Johnson Controls Inc. is looking for forward-thinking talent to join our organization to support the fast-growing HVAC business in North America. JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve. At Johnson Controls you'll have the chance to work on light commercial and/or heavy commercial teams with the most advanced heavy commercial and cutting-edge industrial equipment. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun. We are looking for skilled HVAC Mechanics who have practical work experience in their trade, (HVAC piping, plumbing, pipefitting and/or mechanical equipment service industry). Mechanics must have practical working experience in light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and open-drive screw chillers. Perform maintenance, repair and replacement services on commercial heating and cooling systems. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard. Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. Required: • Must be a member or willing to join the United Association of Journeymen and Apprentices of the Plumbing and Pipe Fitting Industry of the United States and Canada, AFL-CIO., • Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business., • Minimum of Three (3) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry. This includes Rooftop units, pumps, fans, towers, boilers, chillers, compressors, plumbing., • Mechanical shaft alignment using dial indicators, etc. of pumps, fans, Compressors., • Able to use vibration equipment to trouble shoot drivelines., • Travel maybe required 10% to 20% to support Branch Customers activities, trouble shooting, installation and repair., • You will be required to pass a knowledge examination to assess proficiencies., • Opportunity to invest in career development. You will enroll in training programs to gain knowledge in HVAC products and sales quoting., • You will work with other local market mechanics as well as Servicemen and apprentices., • Attention to detail through interpersonal, digital, and written skills. Able to write and communicate to the customer problem, cause, and corrective actions., • Able to provide quotes to customers and participate in JCI's Service Plus Rewards program., • Self-starter with a passion/ desire to learn and apply on the job., • Prioritize safety in all forms, • Universal EPA refrigerants license, applicable state or local licensing, and valid driver's license *This is a Bargaining Unit Position. Pay Range: $36.62 hourly rate determined by the CBA/rate sheet. Benefits are provided through a local labor union aligned with a collective bargaining agreement. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by Johnson Controls International plc. Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

The Plumbing Service Technician I is responsible for performing small plumbing repairs, drain cleaning, assist with equipment replacements, and pipe installation. • Cleaning and clearing of sewer/storm piping., • Emergency response to after-hour plumbing calls., • Video camera inspections to properly diagnose problems and assess the situation appropriately., • Hydro jetting procedures to clean, clear, and maintain sewer/storm piping., • Assists service plumbers with installations and repairs., • Schedules HVAC maintenance and cleaning. Required Education, Experience, and Qualifications • 5+ years' experience as a Service Plumber, • Experience with operating sewer machines, • Experience with operating hydro jetting equipment., • Experience with operating sewer cameras and identifying possible drainage problems., • Experience with pipe installation and equipment replacement., • Basic knowledge of HVAC operation., • Basic electrical safety., • Acceptable driving record., • Effective verbal and written communication skills., • Detail-oriented and willing to tackle various ongoing projects in a fast-paced environment., • Versed in the industry and the Company's competitors., • Ability to multitask and perform duties outside of the scope of work when necessary. Preferred Education, Experience, and Qualifications • OSHA 10 Certification. Physical/Work Environment Requirements • Ascending and descending ladders, stairs, scaffolding, ramps, and/or poles., • Climbing stairs., • Moving self in different positions to accomplish tasks in various environments including tight and confined spaces., • Repeating motions that may include the wrists, hands and/or fingers., • Operating machinery and/or power tools., • Outdoor elements such as precipitation, heat, cold, and/or wind., • Noisy environment., • Light to heavy work that includes adjusting and/or moving objects from 20-100 pounds. ENFRA is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities, and participates in the e-Verify program. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, age, sexual orientation, gender identity, national origin, veteran status, disability, or any other classification protected by law.

St. Martin's Episcopal School is looking for a hands-on maintenance mechanic to join our physical facilities team and help keep our campus running. You'll be all over the property, fixing what breaks, keeping ahead of what's about to, and pitching in wherever the school needs an extra pair of hands. What you'll actually be doing: Some days it's electrical work or plumbing repairs. Other days you're patching concrete, painting, doing carpentry, or out on the grounds pulling weeds and keeping things looking right. You'll work closely with our Physical Facilities Coordinator, who sets your schedule and priorities. You'll also team up with the other maintenance mechanics and groundskeepers day to day. Beyond the regular repair work, you'll: • Handle key cutting and lock/door hardware repairs (and keep decent records of it), • Help set up for and break down school events, • Drive/operate school vehicles and carts safely, • Jump in during weather events or building emergencies as a first responder, • Pick up parts and supplies from vendors when needed What you'll need: You should be comfortable using a multimeter, reading blueprints, and working with both hand and power tools. This job involves real physical work: climbing ladders and scaffolding, getting into tight spaces like manholes, sometimes working on roofs or elevated areas up to 30 feet. You'll need to be able to lift 50+ pounds (think bags of concrete, toolboxes, pipe), stand or walk most of an 8-hour shift, and work outside in whatever weather shows up that day. We also need someone who can pick up new tasks quickly, follow through on work orders without needing constant supervision, keep sensitive information private, and treat students, staff, parents, and visitors with basic courtesy and respect because you'll be interacting with all of them. Schedule: MondayFriday, 7:30 AM4:00 PM, with occasional Saturdays. Some flexibility expected around school events and special projects. Pay: Hourly, based on experience. This is a full-time 12-month position with vacation per school policy. St. Martin's Episcopal School is an equal opportunity employer committed to fostering an inclusive and diverse workforce. St. Martin's Episcopal School does not discriminate against employees or applicants for employment on the basis of race, religion, color, gender, gender identity, national and ethnic origin, disability, genetic information, sexual orientation, age, or any other status protected by applicable federal, state, or local law. EOE

We've made a lot of progress since opening the doors in 1942, but one thing has never changed - our commitment to serve, heal, lead, educate, and innovate. We believe that every award earned, every record broken and every patient helped is because of the dedicated employees who fill our hallways. At Ochsner, whether you work with patients every day or support those who do, you are making a difference and that matters. Come make a difference at Ochsner Health and discover your future today! This job assumes responsibility for maintaining the total hydrology, steam, gas and sewerage distribution systems throughout the company's facilities as assigned, including preventative maintenance, repairs, and troubleshooting, utilizing specialized test equipment and hand/power tools. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential duties. This job description is a summary of the primary duties and responsibilities of the job and position. It is not intended to be a comprehensive or all-inclusive listing of duties and responsibilities. Contents are subject to change at the company's discretion. Required - High School diploma or equivalent Preferred - Trade school training in Plumbing or Pipe Fitting 2 years Commercial or Industrial experience, to include experience reading specifications and Interpreting Schematics, Blueprints, and Mechanical Drawings, experience working with little supervision Required - Current Louisiana State Journeymen Plumbers License in the state of practice Preferred - Medical Gas and Back-Flow Certification • Effective verbal and written communication skills and the ability to present information clearly and professionally., • Knowledge of the state, parish, and southern building codes., • Drawing skills to document plumbing changes for updating prints on CADD., • Ability to properly using all power, hand tools and specialized equipment associated with the plumbing/pipe fitting trade., • Interpersonal skills to deal effectively and courteously with a diverse group of internal and external callers and visitors., • Ability to handle mental and physical stress and pressure to complete all jobs including emergencies., • Ability to work indoors, outdoors, and in restricted spaces involving static postures/positions which must be held for extended periods of time., • Ability to work extended hours and call-in on an emergency basis., • Performs a variety of repair and installation duties in and around the buildings of the facility of the plumbing systems such as water and sewer, steam, air, piped medical gas, vacuum and fire protection., • Performs Preventative Maintenance on associated plumbing system components and documents accordingly to department procedures., • Assists outside contractors with plumbing system outages during major utility repairs and/or new construction., • Assists other Facilities Management staff with troubleshooting/repairing equipment as it relates to the Facility infrastructure., • Other related duties as required. The above statements describe the general nature and level of work only. They are not an exhaustive list of all required responsibilities, duties, and skills. Other duties may be added, or this description amended at any time. Remains knowledgeable on current federal, state and local laws, accreditation standards or regulatory agency requirements that apply to the assigned area of responsibility and ensures compliance with all such laws, regulations and standards. This employer maintains and complies with its Compliance & Privacy Program and Standards of Conduct, including the immediate reporting of any known or suspected unethical or questionable behaviors or conduct; patient/employee safety, patient privacy, and/or other compliance-related concerns. The employer is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. Physical and Environmental Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Medium Work - Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects. (Constantly: activity or condition exists 2/3 or more of the time) to move objects. Physical demand requirements are in excess of those for Sedentary Work. Even though the weight lifted may be only a negligible amount, a job should be rated Light Work: (1) when it requires walking or standing to a significant degree; or (2) when it requires sitting most of the time but entails pushing and/or pulling of arm or leg controls; and/or (3) when the job requires working at a production rate pace entailing the constant pushing and/or pulling of materials even though the weight of those materials is negligible. NOTE: The constant stress and strain of maintaining a production rate pace, especially in an industrial setting, can be and is physically demanding of a worker even though the amount of force exerted is negligible. Normal routine involves no exposure to blood, body fluid or tissue, but exposure or potential for exposure may occur. The incumbent may work near patients who have known or suspected communicable diseases and may enter isolation rooms. The incumbent has an occupational risk for exposure to all communicable diseases. Because the incumbent works within a healthcare setting, there may be occupational risk for exposure to hazardous medications or hazardous waste within the environment through receipt, transport, storage, preparation, dispensing, administration, cleaning and/or disposal of contaminated waste. The risk level of exposure may increase depending on the essential job duties of the role. Are you ready to make a difference? Apply Today! Ochsner Health does not consider an individual an applicant until they have formally applied to the open position on this careers website. Ochsner Health endeavors to make our site accessible to all users. If you would like to contact us regarding the accessibility of our website, or if you need an accommodation to complete the application process, please contact our HR Employee Solution Center at 504-842-4748 (select option 1) or careers@ochsner.org. Ochsner is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to any legally protected class, including protected veterans and individuals with disabilities.

We're looking for a Foreman that will focus on Mechanical Piping by leading, directing, and working alongside the project labor crew while coordinating the execution and completion of mechanical piping and construction labor tasks. This role ensures work is performed safely, efficiently, and in accordance with project requirements, company standards, drawings, specifications, and applicable quality expectations. This role will focus heavily on process piping, stainless steel piping, ductile iron piping, carbon steel piping, PVC and HDPE piping, buried utility piping, and pumping and process equipment connections. The Foreman Process & Mechanical Piping supports daily field execution through layout coordination, installation sequencing, material staging, crew leadership, quality checks, testing support, and coordination with other trades to maintain productivity and project flow. • Team Leadership, • Lead and develop the project labor team through training, coaching, and mentoring., • Provide regular feedback through documented coaching sessions., • Foster a culture of accountability, teamwork, and continuous improvement., • Set clear expectations for daily mechanical piping tasks, installation standards, productivity, and safety., • Support crew members in understanding proper installation methods for process piping, stainless steel piping, ductile iron piping, carbon steel piping, PVC piping, HDPE piping, buried utility piping, and related mechanical systems., • Project Coordination, • Coordinate task schedules and ensure timely completion of assigned work., • Supervise daily activities of the crew, ensuring productivity goals are met., • Collaborate with subcontractors and other trade partners to maintain a clean, organized, and efficient worksite., • Coordinate piping installation activities with project schedules, drawings, specifications, material deliveries, equipment access, and trade sequencing., • Assist with layout coordination, pipe routing, trenching coordination, bedding, backfill coordination, hangers, supports, sleeves, penetrations, valves, fittings, restraints, and equipment tie-ins., • Support coordination of pumping and process equipment connections, including alignment with piping layouts, equipment pads, access requirements, and project sequencing., • Communicate material needs, coordination conflicts, field conditions, installation concerns, and testing requirements to project leadership., • Support coordination between piping scopes and adjacent work, including civil, structural, concrete, electrical, HVAC, plumbing, equipment installation, and controls., • Safety Management, • Ensure adherence to the company's worksite safety program., • Identify and report unsafe behavior or hazardous conditions promptly., • Reinforce a safety-first culture across the crew and subcontractors., • Promote safe work practices related to piping installation, material handling, lifting, rigging, hot work, confined spaces, elevated work, and equipment use., • Ensure crews use appropriate PPE, tools, equipment, and safe installation methods for assigned piping tasks., • Support safe execution of buried utility piping work, including awareness of excavation hazards, utility conflicts, trench protection, access, and housekeeping., • Operational Excellence, • Support and drive utilization of company initiatives and technologies., • Ensure work complies with project plans, specifications, quality standards, and applicable process and mechanical piping requirements., • Maintain accurate daily logs of work performed, manpower, materials, equipment usage, and production progress., • Monitor installed piping work for alignment, fit-up, elevation, slope, thrust restraint, support spacing, embed coordination, equipment connection requirements, and general quality standards., • Assist with inspections, testing preparation, pressure testing, flushing, punch list work, and corrective actions related to piping scopes., • Identify opportunities to improve crew efficiency, reduce rework, maintain material readiness, and support timely completion of piping activities., • Confirm piping materials, fittings, valves, gaskets, supports, restraints, and related components are available and staged to support planned work., • Coordinate with project leadership when drawings, specifications, field conditions, or equipment connection requirements conflict with planned installation. Preferred Qualifications • High School Diploma or GED, • Trade school certificate, apprenticeship training, or equivalent mechanical piping experience preferred., • 5+ years of construction experience, with experience in process piping, mechanical piping, utility piping, or related field work preferred., • Experience with stainless steel piping, ductile iron piping, carbon steel piping, PVC piping, HDPE piping, buried utility piping, and pumping or process equipment connections preferred., • Experience coordinating installation of pipe, valves, fittings, hangers, supports, sleeves, penetrations, restraints, utility tie-ins, and equipment connections preferred., • Experience supporting piping installation, testing, inspection preparation, punch list completion, and corrective work preferred., • Experience reading and interpreting construction drawings, piping plans, isometrics, specifications, equipment layouts, and project schedules preferred., • Proficiency with MS Office Suite and basic project technology platforms., • Ability to coordinate daily crew activities and communicate effectively with supervisors, subcontractors, vendors, and project teams., • Strong understanding of jobsite safety expectations and safe work practices related to piping installation, excavation, material handling, hot work, rigging, and pressure testing., • RNGD Values Alignment, • Exemplifies RNGD's core values:, • Renegade Mentality, • Sweep Floors, • Build Together, • Honor Promises, • Collaborative and Innovative, • Actively seeks opportunities to work together and implement better solutions., • Adapts quickly to rapidly changing technology and leverages tools to enhance efficiency., • Works effectively with other trades to coordinate piping installation and avoid conflicts., • Supports practical field solutions that improve productivity, quality, and project flow., • Operational and Methodical, • Always asks "why" to uncover root causes and solve the right problems., • Takes a structured approach to planning and executing daily activities., • Understands the importance of sequencing, layout, material readiness, and installation standards in mechanical piping work., • Maintains attention to detail when coordinating piping routes, supports, elevations, and field conditions., • Leadership, • Builds cooperative, collaborative, and trusting relationships with team members and business contacts., • Effectively communicates through written, verbal, and non-verbal channels, with excellent listening skills., • Provides clear direction to crew members and reinforces expectations for safety, quality, and productivity., • Maintains professionalism when coordinating with project leadership, subcontractors, and trade partners., • Quality and Safety Awareness, • Recognizes installation, coordination, and safety issues before they become larger problems., • Promotes safe execution of mechanical piping tasks, including material handling, lifting, hot work, and work in active construction environments., • Supports compliance with project drawings, specifications, inspection requirements, and company quality standards., • Maintains accountability for workmanship, jobsite organization, and safe field execution. RNGD is a rapidly scaling organization emerging as a nationally recognized leader in construction through our unique Renegade mindset focused on innovation, creativity, and culture. The team is made up of a highly engaged group of seasoned professionals and emerging leaders. We are creators who believe that what we build drives the growth of our cities and that to fulfill our mission, we must constantly challenge the old way of doing things. Headquartered in New Orleans, Louisiana, we thrive on building communities, building teams, building leaders, and growing the business throughout the Southeast region with offices in Mississippi, Tennessee, and Alabama. RNGD is an Equal Opportunity Employer.

Job Description About the Company RNGD is a rapidly scaling organization emerging as a nationally recognized leader in construction through our unique Renegade mindset focused on innovation, creativity, and culture. The team is made up of a highly engaged group of seasoned professionals and emerging leaders. We are creators who believe that what we build drives the growth of our cities and that to fulfill our mission, we must constantly challenge the old way of doing things. Headquartered in New Orleans, Louisiana, we thrive on building communities, building teams, building leaders, and growing the business throughout the Southeast region with additional offices in Mississippi, Tennessee, and Alabama. About the Role We’re looking for a Foreman that will focus on Mechanical Piping by leading, directing, and working alongside the project labor crew while coordinating the execution and completion of mechanical piping and construction labor tasks. This role ensures work is performed safely, efficiently, and in accordance with project requirements, company standards, drawings, specifications, and applicable quality expectations. This role will focus heavily on process piping, stainless steel piping, ductile iron piping, carbon steel piping, PVC and HDPE piping, buried utility piping, and pumping and process equipment connections. The Foreman – Process & Mechanical Piping supports daily field execution through layout coordination, installation sequencing, material staging, crew leadership, quality checks, testing support, and coordination with other trades to maintain productivity and project flow. Core Responsibilities • Team Leadership, • Lead and develop the project labor team through training, coaching, and mentoring., • Provide regular feedback through documented coaching sessions., • Foster a culture of accountability, teamwork, and continuous improvement., • Set clear expectations for daily mechanical piping tasks, installation standards, productivity, and safety., • Support crew members in understanding proper installation methods for process piping, stainless steel piping, ductile iron piping, carbon steel piping, PVC piping, HDPE piping, buried utility piping, and related mechanical systems., • Project Coordination, • Coordinate task schedules and ensure timely completion of assigned work., • Supervise daily activities of the crew, ensuring productivity goals are met., • Collaborate with subcontractors and other trade partners to maintain a clean, organized, and efficient worksite., • Coordinate piping installation activities with project schedules, drawings, specifications, material deliveries, equipment access, and trade sequencing., • Assist with layout coordination, pipe routing, trenching coordination, bedding, backfill coordination, hangers, supports, sleeves, penetrations, valves, fittings, restraints, and equipment tie-ins., • Support coordination of pumping and process equipment connections, including alignment with piping layouts, equipment pads, access requirements, and project sequencing., • Communicate material needs, coordination conflicts, field conditions, installation concerns, and testing requirements to project leadership., • Support coordination between piping scopes and adjacent work, including civil, structural, concrete, electrical, HVAC, plumbing, equipment installation, and controls., • Safety Management, • Ensure adherence to the company’s worksite safety program., • Identify and report unsafe behavior or hazardous conditions promptly., • Reinforce a safety-first culture across the crew and subcontractors., • Promote safe work practices related to piping installation, material handling, lifting, rigging, hot work, confined spaces, elevated work, and equipment use., • Ensure crews use appropriate PPE, tools, equipment, and safe installation methods for assigned piping tasks., • Support safe execution of buried utility piping work, including awareness of excavation hazards, utility conflicts, trench protection, access, and housekeeping., • Operational Excellence, • Support and drive utilization of company initiatives and technologies., • Ensure work complies with project plans, specifications, quality standards, and applicable process and mechanical piping requirements., • Maintain accurate daily logs of work performed, manpower, materials, equipment usage, and production progress., • Monitor installed piping work for alignment, fit-up, elevation, slope, thrust restraint, support spacing, embed coordination, equipment connection requirements, and general quality standards., • Assist with inspections, testing preparation, pressure testing, flushing, punch list work, and corrective actions related to piping scopes., • Identify opportunities to improve crew efficiency, reduce rework, maintain material readiness, and support timely completion of piping activities., • Confirm piping materials, fittings, valves, gaskets, supports, restraints, and related components are available and staged to support planned work., • Coordinate with project leadership when drawings, specifications, field conditions, or equipment connection requirements conflict with planned installation. Preferred Qualifications • High School Diploma or GED, • Trade school certificate, apprenticeship training, or equivalent mechanical piping experience preferred., • 5+ years of construction experience, with experience in process piping, mechanical piping, utility piping, or related field work preferred., • Experience with stainless steel piping, ductile iron piping, carbon steel piping, PVC piping, HDPE piping, buried utility piping, and pumping or process equipment connections preferred., • Experience coordinating installation of pipe, valves, fittings, hangers, supports, sleeves, penetrations, restraints, utility tie-ins, and equipment connections preferred., • Experience supporting piping installation, testing, inspection preparation, punch list completion, and corrective work preferred., • Experience reading and interpreting construction drawings, piping plans, isometrics, specifications, equipment layouts, and project schedules preferred., • Proficiency with MS Office Suite and basic project technology platforms., • Ability to coordinate daily crew activities and communicate effectively with supervisors, subcontractors, vendors, and project teams., • Strong understanding of jobsite safety expectations and safe work practices related to piping installation, excavation, material handling, hot work, rigging, and pressure testing. Core Competencies • RNGD Values Alignment, • Exemplifies RNGD’s core values:, • Renegade Mentality, • Sweep Floors, • Build Together, • Honor Promises, • Collaborative and Innovative, • Actively seeks opportunities to work together and implement better solutions., • Adapts quickly to rapidly changing technology and leverages tools to enhance efficiency., • Works effectively with other trades to coordinate piping installation and avoid conflicts., • Supports practical field solutions that improve productivity, quality, and project flow., • Operational and Methodical, • Always asks “why” to uncover root causes and solve the right problems., • Takes a structured approach to planning and executing daily activities., • Understands the importance of sequencing, layout, material readiness, and installation standards in mechanical piping work., • Maintains attention to detail when coordinating piping routes, supports, elevations, and field conditions., • Leadership, • Builds cooperative, collaborative, and trusting relationships with team members and business contacts., • Effectively communicates through written, verbal, and non-verbal channels, with excellent listening skills., • Provides clear direction to crew members and reinforces expectations for safety, quality, and productivity., • Maintains professionalism when coordinating with project leadership, subcontractors, and trade partners., • Quality and Safety Awareness, • Recognizes installation, coordination, and safety issues before they become larger problems., • Promotes safe execution of mechanical piping tasks, including material handling, lifting, hot work, and work in active construction environments., • Supports compliance with project drawings, specifications, inspection requirements, and company quality standards., • Maintains accountability for workmanship, jobsite organization, and safe field execution. RNGD is an Equal Opportunity Employer

Job Description Overview: Provide overall direction for field installation of assigned project. Owns direct responsibility for field labor, labor coordination, quality control, and safety on assigned project. Represents RMS on the project site and ensures that the installation functions as designed and satisfies the contracted scope. Foreman Level • Attend and contribute to operations meetings, • Read blueprints and construction documents, • Coordinate layouts, sketching, and material take-offs, • Manage material, tool, and equipment ordering, receiving, placement, and returns, • Verify contract scope against project drawings and specifications, • Respond to general contractor requests regarding scope limitations, • Complete daily reports, timekeeping, RFI tracking, submittal logs, and other administrative duties, • Ensure company safety standards and programs are implemented and effective, • Maintain building code compliance, • Perform quality control inspections, • Coordinate transportation and installation of prefabricated components Superintendent Level • Perform all Foreman-level functions, • Coordinate trade stacking and project phasing, • Influence project scheduling and sequencing, • Direct field operations across multiple crews and project phases, • Support project budgeting, staffing, and production goals Detailed Job Functions Project Planning & Coordination • Read blueprints, production layouts, and technical drawings, • Interpret construction specifications, • Determine project methods and procedures, • Make independent decisions regarding installation and assembly procedures, • Determine material, tool, and manpower requirements Installation & Construction • Assemble and install pipe sections, fittings, fixtures, and plumbing systems, • Install underground storm, sanitary, and water distribution systems, • Cut, bend, thread, and fit pipe for gas, air, hydraulic, and water systems, • Repair and replace plumbing systems and piping, • Apply adhesives, caulking, sealants, and coatings, • Build and repair structures associated with construction projects Quality Control & Testing • Inspect installations for compliance with project specifications, • Perform pressure testing of piping systems, • Verify workmanship standards and project requirements are achieved, • Ensure adherence to applicable building codes Equipment & Tools • Operate hand and power tools, • Use measuring devices and pressure gauges, • Operate pipe fitting and soldering equipment, • Use acetylene cutting and welding equipment, • Perform brazing, soldering, and welding operations, • Maintain and repair tools and equipment as needed Safety & Compliance • Enforce company and OSHA safety standards, • Conduct jobsite safety inspections, • Monitor work activities to ensure safe practices, • Maintain compliance with applicable regulations and standards Leadership & Communication • Coordinate with project managers, superintendents, subcontractors, and general contractors, • Lead and supervise field personnel, • Communicate project expectations and production goals, • Maintain accurate project documentation and reporting Experience Requirements Foreman Level • Minimum 1 year of experience supervising crews of 4-5 employees, • Thorough understanding of all phases of duct and equipment installation, • Advanced knowledge of field assembly and construction practices, • Ability to manage budgets and schedules, • Ability to plan for unforeseen challenges while maintaining productivity, • Proven ability to meet project deadlines while maintaining safety standards, • Excellent organizational, leadership, and communication skills Superintendent Level • Meet all Foreman-level qualifications, • Minimum 2 years of experience supervising crews of 10-15 employees, • Experience managing projects valued at $500,000 or more, • Strong scheduling, manpower planning, and project coordination skills Physical Requirements • Frequent bending, kneeling, twisting, and lifting, • Ability to climb ladders, scaffolds, and stairs, • Frequent use of hands and tools, • Extended periods of standing and walking, • Ability to work at heights, • Ability to move and position heavy materials and equipment, • Ability to work in varying weather and jobsite conditions \nCompany Description RMS offers extensive mechanical and plumbing services for new construction, renovations, additions, and retrofits. Our experienced staff is well versed in preconstruction, value engineering, design, fabrication, construction, and safety, which allows our company to meet the strict demands of any commercial project. RMS offers extensive mechanical and plumbing services for new construction, renovations, additions, and retrofits. Our experienced staff is well versed in preconstruction, value engineering, design, fabrication, construction, and safety, which allows our company to meet the strict demands of any commercial project.

Job DescriptionDescription: Summary of Responsibilities: The Utility Foreman is responsible for leading and supervising utility construction crews in the installation, maintenance, and repair of underground utility systems, including water, sewer, storm drainage, force mains, duct banks, and related infrastructure. The Utility Foreman is accountable for the safe, productive, and profitable execution of assigned work while maintaining the highest standards of quality and compliance. This position serves as the primary field leader for assigned crews and is responsible for planning daily work activities, coordinating labor, equipment, and materials, monitoring production, ensuring quality workmanship, and maintaining a safe work environment. The Utility Foreman works closely with Superintendents, Project Managers, Surveyors, Inspectors, and Owners to ensure successful project execution from mobilization through completion. Taking Charge Durr TAKES CHARGE in constructing strong foundations upon which to build. Our focus is to do it SAFE and to do it RIGHT - the first time. Our vision is to make an IMPACT and to KICK ASS, INNOVATE, MAKE MONEY, HAVE FUN and REPEAT every day/all day. We hold every employee to this standard of “Taking Charge,” and we expect this behavior to drive everything we do. The Take Charge Utility Foreman: PLANS THE WORK – and Works the Plan! · Thoroughly understands project plans, specifications, utility profiles, contract requirements, and scope of work. · Plans daily and weekly activities to ensure labor, equipment, materials, tools, and subcontractors are available before work begins. · Conducts daily crew meetings and pre-task planning discussions. · Develops and communicates daily production goals and expectations. · Participates in two-week look-ahead planning and weekly GAMEPLAN meetings. · Coordinates with Superintendents, Project Managers, Surveyors, Utility Owners, and Inspectors to ensure efficient project execution. · Identifies potential conflicts, utility clashes, access issues, and production obstacles before they impact operations. · Maintains accurate daily reports, production records, quantities installed, and project documentation. · Ensures crews understand project priorities and scheduled milestones. SAFETY – It’s not a slogan; it’s OUR CULTURE! • Be actively engaged in your project, • Be a MENTOR – educate and provide guidance for those under your supervision. We are counting on you to TAKE, • CHARGE and ensure a safe job site for all our employees., • REPORT ALL SAFETY INCIDENTS AND NEAR MISSES IMMEDIATELY QUALITY – Do it once; do it right! · Ensures all utility installations meet project specifications, plans, and quality standards. · Verifies grades, elevations, alignments, slopes, and utility locations before and during installation. · Coordinates inspections and testing activities with project teams and inspectors. · Maintains accurate as-built information and documentation. · Performs ongoing quality control inspections and corrects deficiencies immediately. · Ensures all materials installed comply with approved submittals and project requirements. · Creates and manages punch list items until completion. TAKE OWNERSHIP – It’s your job, own it! · Takes full responsibility for assigned work areas and crews. · Leads crews with professionalism, accountability, and integrity. · Maintains positive relationships with owners, inspectors, subcontractors, and project stakeholders. · Ensures equipment is properly maintained, inspected, and returned clean and serviceable. · Verifies material deliveries for accuracy and quantity. · Protects company assets, equipment, tools, and resources. · Proactively resolves problems and escalates issues when necessary. · Holds team members accountable for performance, attendance, safety, and workmanship. PRODUCTIVITY & EFFICIENCY – The ROOT CAUSE of GREAT PRODUCTIVITY is GREAT PLANNING Ensure our work is being tracked in HCSS and share our progress with the team - “Things that get measured get done” · Monitors daily production rates and crew performance. · Drives crews to meet or exceed labor and equipment budgets. · Tracks installed quantities and completed work accurately. · Identifies opportunities to improve efficiency, reduce costs, and increase profitability. · Evaluates means and methods and adjusts operations to improve performance. · Ensures equipment and labor resources are being utilized efficiently. · Coordinates work sequencing to minimize downtime and maximize productivity. · Communicates production progress and challenges to project leadership. · Supervises operators, pipe layers, laborers, and subcontractors. · Provides ongoing coaching, training, and mentoring. · Evaluates employee performance and provides constructive feedback. · Recognizes and praises strong performance. · Develops future leaders by teaching company standards and expectations. · Builds a positive team environment focused on accountability and success. · Promotes teamwork and collaboration across all project personnel. · The DURR Way: Be Proactive • Anticipate future needs and address them today (not tomorrow) Be Accountable • Take ownership of your actions and honor your commitments made to other Speak the Truth • Always be honest and share your thoughts to improve yourself and the team Go the Extra Mile • Do what it takes to get the job done right and safe the first time Give Praise • Acknowledge and celebrate the achievements of teammates Be Part of One Team • Build strong win-win relationships with all teammates Knowledge, Skills, and Abilities: · Strong knowledge of underground utility construction methods and practices. · Experience installing water, sewer, storm drainage, force mains, duct banks, and related utility infrastructure. · Ability to read and interpret plans, profiles, specifications, and construction documents. · Understanding of utility grades, elevations, slopes, benchmarks, and layout procedures. · Knowledge of trenching, shoring, excavation safety, and utility locating requirements. · Understanding of production rates, labor management, and cost control. · Strong leadership, communication, and team-building skills. · Excellent organizational and problem-solving abilities. · Ability to manage multiple priorities in a fast-paced construction environment. · Basic computer and reporting skills. · Ability to effectively communicate with employees, management, clients, and inspectors. Education and/or Experience: · Minimum 5 years of utility construction experience required. · Minimum 2 years of experience leading utility crews preferred. · Heavy civil construction experience strongly preferred. · OSHA 30 certification preferred. · Valid driver's license required. Physical Demands/Working Conditions: This role operates in a business office setting. The employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines. The employee is frequently required to stand and walk. The employee is not regularly exposed to outdoor weather conditions. The noise level in the work environment is usually quiet to moderate. Requirements:

The basic function of a Welder (Structural / Pipe) is to weld carbon steel using various welding techniques, tools, and processes. Welder (Structural/Pipe) - Fabrication Shop.

The Marine Pipe Welder is responsible for performing high-quality welds on pipes and related components aboard vessels, in accordance with shipbuilding standards and specifications. Prepare and set up pipe and pipe fittings for welding. Perform TIG, MIG, and/or stick welding on carbon steel, stainle

Assembles and installs a variety of metal and non-metal pipe and fittings. Ability to read and utilize Pipefitter's Blue Book. Joins pipe and secures to structure with clamps, brackets and hangers.

A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. The Pipe Fitter journeyman is a

Must have a minimum of 3 months of experience pipe fitting Carbon Steel; and Able to successfully demonstrate the ability to pass a hands-on pipe fitter test by performing the following: fitting a pipe using a cutting grinder (Metabo) to make a square cut, applying a bevel using a grinder with a san

Job Description Licensed Plumbing Service Technician — RMS Services Join a reliable service team where your plumbing skills, problem-solving ability, and commitment to customer service are valued every day. About the role RMS Services is hiring a skilled Plumbing Service Technician to perform service calls, repairs, drain cleaning, equipment replacement support, and pipe installation work. This is a hands-on role for a licensed Louisiana Plumber who takes pride in quality workmanship, clear communication, and safe work practices. What you’ll do • Perform plumbing service repairs, drain cleaning, equipment replacement assistance, and pipe installation., • Use hydro jetting procedures to clean, clear, and maintain sewer and storm piping., • Complete video camera inspections to diagnose plumbing issues and recommend appropriate next steps., • Communicate professionally with customers, team members, supervisors, and vendors., • Complete required documentation for each job, including accurate startup records and service details. What we’re looking for • Current Plumbing license in Louisiana., • At least 2 years of experience as a service plumber., • Acceptable driving record and ability to travel to service locations as needed., • Ability to lift up to 50 lbs. and perform physical work that may include bending, stooping, squatting, crouching, climbing, kneeling, and twisting., • Ability to work safely indoors, outdoors, on ladders, and around moving equipment. Why you’ll want to work with us Year-round work. • Competitive pay based on experience., • Steady, hands-on plumbing service work with a team that values safety, quality, and professionalism., • Long-term advancement opportunities within a growing company., • Benefits available including medical, dental, vision, life insurance, short-term and long-term disability coverage, and a flexible spending account (FSA) Ready to apply? If you’re a licensed Louisiana plumber looking for steady service work with a professional team, we’d like to hear from you. Apply today to join RMS Services as a Plumbing Service Technician. \nCompany Description RMS offers extensive mechanical and plumbing services for new construction, renovations, additions, and retrofits. Our experienced staff is well versed in preconstruction, value engineering, design, fabrication, construction, and safety, which allows our company to meet the strict demands of any commercial project. RMS offers extensive mechanical and plumbing services for new construction, renovations, additions, and retrofits. Our experienced staff is well versed in preconstruction, value engineering, design, fabrication, construction, and safety, which allows our company to meet the strict demands of any commercial project.

Job Description Installation, repair and maintenance of pneumatic and hydraulic systems, emergency shutdown systems and equipment. • Performs installation, maintenance, and troubleshooting on pneumatic and hydraulic equipment., • Layout, measure, bend, cut, thread, ream and fit hard pipe systems., • Install single line and group tubing and fittings., • Calibrates and commissions instrument circuits and end devices., • Layout and install pneumatic and hydraulic panels and end devices., • Oversees the demolition of tubing and end devices., • Knowledge of industry and American Petroleum Institute standards., • Able to read and red line relevant construction drawings and P&ID?s., • Knowledge of pneumatic and hydraulic control logic., • Supervise small crews and perform duties of Field Lead during absence., • Provide technical support to and mentor subordinates., • Process all field service documentation in a correct and timely manner in absence of Field Tech Lead., • Ensure all quality standards and HSE policies and procedures are supported and adhered to., • Recognize and mitigate safety hazards and dangers., • All above functions performed without supervision. .

Job Description As a Revit Pipe Detailer, you will be responsible for creating detailed 3D models of piping systems using Revit. You will collaborate with engineers, architects, and other team members to ensure accurate and efficient designs. Your role will involve interpreting technical specifications, addressing design issues, and ensuring compliance with industry standards. This critical role seeks to utilize the highest levels of technology, construction knowledge and standards to produce high quality 2D and 3D construction documents to increase efficiency and reduce cost. RESPONSIBILITIES: • Create detailed 3D models of piping systems using Revit., • Collaborate with engineers, architects, and other team members to meet project requirements., • Interpret blueprints, piping and instrumentation diagrams (P&IDs), and other technical specifications., • Address and resolve design issues within the Revit environment., • Ensure compliance with relevant codes, standards, and regulations., • Conduct site visits to gather data and verify conditions for accurate modeling., • Prepare material take-offs and bills of materials., • Communicate design concepts and updates effectively. Requirements • Proficiency in Revit for creating detailed 3D models of piping systems., • Knowledge of Building Information Modeling (BIM) processes., • Familiarity with piping design principles, including system layouts and components., • Strong attention to detail and accuracy in drawings and models., • Excellent collaboration and communication skills., • Problem-solving skills to address and resolve design issues., • Understanding of relevant industry codes, standards, and regulations., • Field experience with site visits to gather data and verify conditions., • Strong verbal and written communication skills., • Understanding of trade coordination between HVAC, piping, plumbing, electrical, and structural systems. Physical Requirements This job requires the ability to work at a desk with computer equipment for prolonged periods of time. Eye-hand coordination and sustained focus are essential. Benefits At Gallo Mechanical LLC, our foundation is built on the core values of family, service, and exceptional performance. With 80 years as a proud, locally-owned family business, we are dedicated to finding innovative ways to serve and support the community we call home. It all starts with our greatest asset – our people! We invest in your growth through dedicated training programs and back you up with a comprehensive benefits package designed to help you thrive in your career. • Training, support, and career progression to help you grow in your career., • Company-paid medical insurance, • Dental, vision, voluntary life, short term disability, accident, and critical illness insurance, • Team Incentive Program (TIP): Allows eligible employees to share in company financial success., • 401(k) plan with a 5% company match, • Employee wellness resources, PTO benefits, and more!

The Project Superintendent provides field supervision to ensure Westwood’s delivery of quality construction services to its clients by effectively managing all field project activities for jobs assigned to them.It is expected that assigned projects will be completed safely, on time, and within

Reports to: Project Manager .Spriggs Excavation is recruiting for a full-time, 100% travel position.This role requires continuous travel to project sites across multiple states based on business needs and project schedules.Employees in this position should expect to be assigned to one location f

Traveling Commercial Construction Superintendent | Independent contractor (1099) | Nationwide Commercial Projects | Full-Time Schedule | Contract-to-Hire | Travel Home Every 3 Weeks | $90K-$130K + Travel + Per Diem.WBENC women-owned commercial construction and facilities maintenance company.Founded

InterSolutions - - Responsibilities: Accurately complete service tickets and log all assigned work orders in a timely manner; Manage vacant apartments, preparing them for leasing; Maintain grounds by keeping them free of debris and trash; Provide excellent customer service to residents; Perform repa

Pickup and delivery of cargo to and from various destinations usually within proximity of the consolidation/distribution center.The loading and unloading of trailers utilizing the same techniques, technology and procedures as a dock worker.Actual duties and schedule may vary depending on terminal lo

The job includes extensive travel to monitor your team and job sites in your area.Includes regular meetings in the TSG Sulphur office.Reliable transportation is required.This role includes shared responsibility for after-hours coverage through an on-call rotation.Team members rotate on-call duties a