Trabajos plc programming en New York, New YorkCrear alertas

Smurfit Westrock (NYSE:SW) is the go-to leader and partner of choice in sustainable packaging. We are dedicated to creating efficient and scalable paper and packaging solutions to help solve complex packaging challenges. Guided by our values of safety, loyalty, integrity and respect, we are committed to delivering meaningful value for shareholders, customers, employees and the communities where we operate. Maintenance Mechanic - Dayton, NJ Shift: 3rd Pay: $35.39/hr-$40.31/hr (based on experience) How you will impact WestRock: • Troubleshoots and repairs mechanical, hydraulic, pneumatic and electrical/electronic equipment including but not limited to programmable controls, numeral controls, power supplies, drives, gages and test equipment., • Plans and performs work requiring a thorough knowledge of electrical/electronic and mechanical theories and principles, writing specifications, local and national electrical codes, properties of various materials, and principles of operation and application of electronic equipment., • Installs, starts up and shuts down equipment in accordance with company safety procedures for machine activation and shutdown and in line with OSHA requirements., • Advises operators and line mechanics of operation procedures and requirements for working safely with electrical/electronic and mechanical equipment and components., • Informs appropriate management and line mechanics of potential electrical/mechanical problems and inherent dangers involved., • Maintains company-required performance and maintenance records for identified equipment., • Performs preventive maintenance functions as directed., • Assists maintenance personnel with technical troubleshooting., • Assists and trains other maintenance and/or other technical level employees., • Must be educationally certified through a tech or trade school beyond High School, • Must be highly safety conscious., • Proven experience in the electrical/electronics, mechanical, hydraulic and pneumatic fields are required and the ability to demonstrate high proficiency in these areas., • A thorough knowledge of electrical/ electronic components and equipment including the use of special instruments for diagnostic purposes., • Willing to work any shift and overtime as required., • Computer experience/operation and PLC programming are necessary., • High degree of precision working with minimum tolerances required., • Ability to climb in overhead structures, to work beneath machines and in close quarters performing analysis and repair work., • Must be willing to obtain High Pressure Black Seal boiler operators license after probationary period The starting range is $35.39/hr-$40.31/hr depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 5 days of paid vacation will be granted after 1 year of service, and 12 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ___ and the application window is expected to close by 3/24/26 #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

How you'll help us Keep Climbing (overview & key responsibilities) At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience. As a Lead Ground Maintenance Technician (GMT) in a stationary role, you will join Delta’s Ground Support Equipment team, where you will lead and supervise a group of Stationary Ground Maintenance Technicians (GMT) Stationary Ground Maintenance Mechanics (GMM) and Maintenance Utility 1 Employees (MUE1) in planning and laying out work. The Lead GMT utilizes appropriate equipment and material to accomplish all routine and non-routine maintenance functions on stationary ground support equipment. Summary of responsibilities: Electrical/mechanical troubleshooting and repair, and other technical work as required on all Stationary Ground Support Equipment. Completes data entry to record work assignments and will communicate with other Company personnel as needed. Inspecting, servicing, troubleshooting, repairing, replacing, and overhauling all ground support equipment and components, such as jetways, baggage conveyor systems. Internal Movement Eligibility Internal Employees: Before applying for this position, please reference the company's Internal Mobility Policy and Residency Policy to ensure you meet all eligibility requirements. You must be in good standing, which includes meeting performance standards and tenure requirements in your current role. For more information, visit the HR portal or contact your manager or HR representative. Compliance with these policies is mandatory for consideration. Delta Air Lines will never ask candidates for money throughout our recruitment process, including for any pre-employment screenings. All email communications with Delta’s recruitment team will come from a Delta email domain. If you have any questions about the legitimacy of an outreach from Delta’s recruitment team, you can contact . What you need to succeed (minimum qualifications) Consistently prioritizes safety and security of self, others, and personal data. Embrace diverse people, thinking, and styles. Possesses a high school diploma, GED, or high school equivalency. Is at least 18 years of age and has authorization to work in the United States. Must have a valid driver's license. Must be proficient in English. Must have successfully completed a two-year degree at a post-secondary technical school or have a minimum of three years of experience in Ground Support Equipment maintenance. Achieve a satisfactory score on entry tests structured to determine ability to perform required tasks. Ability to lift items weighing up to 70 pounds. Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays. Have a thorough theoretical and working knowledge of stationary ground support equipment (GSE). Practice safety and environmentally conscious behaviors in all operational processes and procedures. Proficiency in reading and comprehending mechanical, electrical, hydraulic, and pneumatic schematics. Experience with industrial AC/DC controls, high and low voltage systems. Must have Programmable Logic Controller (PLC) experience with some programming experience in systems, such as Allen Bradly PLC5, SLC 500, Control Logix, and Micro Logix systems. Must have excellent written and verbal communication skills and provide outstanding customer service. Lead GMTs should be able to comprehend and apply information contained in detailed and complex technical manuals, procedural manuals, blueprints, etc. with no assistance. Have good problem-solving skills and the ability to work independently in a variety of environments. Must have a thorough theoretical and hands on working knowledge of stationary ground support equipment assigned to the station with heavy emphasis passenger boarding bridges, baggage conveyor systems - mechanical/control systems, 400HZ ground power, and A/C - chiller system operation and point of use equipment. What will give you a competitive edge (preferred qualifications) Basic knowledge of Microsoft Office software products (Word, Excel, Outlook, and PowerPoint). Benefits and Perks to Help You Keep Climbing Our culture is rooted in a shared dedication to living our values – Care, Integrity, Resilience and Servant Leadership – every day, in everything we do. At Delta, our people are our success. At the heart of what we offer is our focus on Sharing Success with Delta employees. Exploring a career at Delta gives you a chance to see the world while earning great compensation and benefits to help you keep climbing along the way: Competitive salary, industry-leading profit sharing program, and performance incentives. 401(k) with generous company contributions up to 9%. New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 – March 31). In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period. LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program. 10 paid holidays per calendar year. Birthing parents are eligible for 12-weeks of paid maternity/parental leave. Non-birthing parents are eligible for 2-weeks of paid parental leave. Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits. Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages. Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health. Domestic and International space-available flight privileges for employees and eligible family members. Career development programs to achieve your long-term career goals. World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint. Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies. Recognition rewards and awards through the platform Unstoppable Together. Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience. As a Lead Ground Maintenance Technician (GMT) in a stationary role, you will join Delta’s Ground Support Equipment team, where you will lead and supervise a group of Stationary Ground Maintenance Technicians (GMT) Stationary Ground Maintenance Mechanics (GMM) and Maintenance Utility 1 Employees (MUE1) in planning and laying out work. The Lead GMT utilizes appropriate equipment and material to accomplish all routine and non-routine maintenance functions on stationary ground support equipment. Summary of responsibilities: Electrical/mechanical troubleshooting and repair, and other technical work as required on all Stationary Ground Support Equipment. Completes data entry to record work assignments and will communicate with other Company personnel as needed. Inspecting, servicing, troubleshooting, repairing, replacing, and overhauling all ground support equipment and components, such as jetways, baggage conveyor systems. Internal Movement Eligibility Internal Employees: Before applying for this position, please reference the company's Internal Mobility Policy and Residency Policy to ensure you meet all eligibility requirements. You must be in good standing, which includes meeting performance standards and tenure requirements in your current role. For more information, visit the HR portal or contact your manager or HR representative. Compliance with these policies is mandatory for consideration. Delta Air Lines will never ask candidates for money throughout our recruitment process, including for any pre-employment screenings. All email communications with Delta’s recruitment team will come from a Delta email domain. If you have any questions about the legitimacy of an outreach from Delta’s recruitment team, you can contact . Consistently prioritizes safety and security of self, others, and personal data. Embrace diverse people, thinking, and styles. Possesses a high school diploma, GED, or high school equivalency. Is at least 18 years of age and has authorization to work in the United States. Must have a valid driver's license. Must be proficient in English. Must have successfully completed a two-year degree at a post-secondary technical school or have a minimum of three years of experience in Ground Support Equipment maintenance. Achieve a satisfactory score on entry tests structured to determine ability to perform required tasks. Ability to lift items weighing up to 70 pounds. Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays. Have a thorough theoretical and working knowledge of stationary ground support equipment (GSE). Practice safety and environmentally conscious behaviors in all operational processes and procedures. Proficiency in reading and comprehending mechanical, electrical, hydraulic, and pneumatic schematics. Experience with industrial AC/DC controls, high and low voltage systems. Must have Programmable Logic Controller (PLC) experience with some programming experience in systems, such as Allen Bradly PLC5, SLC 500, Control Logix, and Micro Logix systems. Must have excellent written and verbal communication skills and provide outstanding customer service. Lead GMTs should be able to comprehend and apply information contained in detailed and complex technical manuals, procedural manuals, blueprints, etc. with no assistance. Have good problem-solving skills and the ability to work independently in a variety of environments. Must have a thorough theoretical and hands on working knowledge of stationary ground support equipment assigned to the station with heavy emphasis passenger boarding bridges, baggage conveyor systems - mechanical/control systems, 400HZ ground power, and A/C - chiller system operation and point of use equipment. Basic knowledge of Microsoft Office software products (Word, Excel, Outlook, and PowerPoint). Our culture is rooted in a shared dedication to living our values – Care, Integrity, Resilience and Servant Leadership – every day, in everything we do. At Delta, our people are our success. At the heart of what we offer is our focus on Sharing Success with Delta employees. Exploring a career at Delta gives you a chance to see the world while earning great compensation and benefits to help you keep climbing along the way: Competitive salary, industry-leading profit sharing program, and performance incentives. 401(k) with generous company contributions up to 9%. New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 – March 31). In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period. LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program. 10 paid holidays per calendar year. Birthing parents are eligible for 12-weeks of paid maternity/parental leave. Non-birthing parents are eligible for 2-weeks of paid parental leave. Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits. Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages. Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health. Domestic and International space-available flight privileges for employees and eligible family members. Career development programs to achieve your long-term career goals. World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint. Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies. Recognition rewards and awards through the platform Unstoppable Together. Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience. As a Lead Ground Maintenance Technician (GMT) in a stationary role, you will join Delta’s Ground Support Equipment team, where you will lead and supervise a group of Stationary Ground Maintenance Technicians (GMT) Stationary Ground Maintenance Mechanics (GMM) and Maintenance Utility 1 Employees (MUE1) in planning and laying out work. The Lead GMT utilizes appropriate equipment and material to accomplish all routine and non-routine maintenance functions on stationary ground support equipment. Summary of responsibilities: Electrical/mechanical troubleshooting and repair, and other technical work as required on all Stationary Ground Support Equipment. Completes data entry to record work assignments and will communicate with other Company personnel as needed. Inspecting, servicing, troubleshooting, repairing, replacing, and overhauling all ground support equipment and components, such as jetways, baggage conveyor systems. Internal Movement Eligibility Internal Employees: Before applying for this position, please reference the company's Internal Mobility Policy and Residency Policy to ensure you meet all eligibility requirements. You must be in good standing, which includes meeting performance standards and tenure requirements in your current role. For more information, visit the HR portal or contact your manager or HR representative. Compliance with these policies is mandatory for consideration. Delta Air Lines will never ask candidates for money throughout our recruitment process, including for any pre-employment screenings. All email communications with Delta’s recruitment team will come from a Delta email domain. If you have any questions about the legitimacy of an outreach from Delta’s recruitment team, you can contact . Consistently prioritizes safety and security of self, others, and personal data. Embrace diverse people, thinking, and styles. Possesses a high school diploma, GED, or high school equivalency. Is at least 18 years of age and has authorization to work in the United States. Must have a valid driver's license. Must be proficient in English. Must have successfully completed a two-year degree at a post-secondary technical school or have a minimum of three years of experience in Ground Support Equipment maintenance. Achieve a satisfactory score on entry tests structured to determine ability to perform required tasks. Ability to lift items weighing up to 70 pounds. Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays. Have a thorough theoretical and working knowledge of stationary ground support equipment (GSE). Practice safety and environmentally conscious behaviors in all operational processes and procedures. Proficiency in reading and comprehending mechanical, electrical, hydraulic, and pneumatic schematics. Experience with industrial AC/DC controls, high and low voltage systems. Must have Programmable Logic Controller (PLC) experience with some programming experience in systems, such as Allen Bradly PLC5, SLC 500, Control Logix, and Micro Logix systems. Must have excellent written and verbal communication skills and provide outstanding customer service. Lead GMTs should be able to comprehend and apply information contained in detailed and complex technical manuals, procedural manuals, blueprints, etc. with no assistance. Have good problem-solving skills and the ability to work independently in a variety of environments. Must have a thorough theoretical and hands on working knowledge of stationary ground support equipment assigned to the station with heavy emphasis passenger boarding bridges, baggage conveyor systems - mechanical/control systems, 400HZ ground power, and A/C - chiller system operation and point of use equipment. Basic knowledge of Microsoft Office software products (Word, Excel, Outlook, and PowerPoint). Our culture is rooted in a shared dedication to living our values – Care, Integrity, Resilience and Servant Leadership – every day, in everything we do. At Delta, our people are our success. At the heart of what we offer is our focus on Sharing Success with Delta employees. Exploring a career at Delta gives you a chance to see the world while earning great compensation and benefits to help you keep climbing along the way: Competitive salary, industry-leading profit sharing program, and performance incentives. 401(k) with generous company contributions up to 9%. New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 – March 31). In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period. LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program. 10 paid holidays per calendar year. Birthing parents are eligible for 12-weeks of paid maternity/parental leave. Non-birthing parents are eligible for 2-weeks of paid parental leave. Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits. Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages. Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health. Domestic and International space-available flight privileges for employees and eligible family members. Career development programs to achieve your long-term career goals. World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint. Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies. Recognition rewards and awards through the platform Unstoppable Together. Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

Our client is currently seeking a Plant Engineer Position Overview The Plant Engineer will be responsible for implementing and sustaining automation technologies, supporting high-speed packaging operations, coordinating engineering projects, and partnering closely with maintenance and production teams to achieve performance, safety, and quality objectives. Essential Duties & Responsibilities Automation & Controls Engineering • Develop, maintain, and optimize controls systems to support production and packaging operations., • Program and troubleshoot Allen-Bradley PLCs, including RSLogix 5000 / Studio 5000., • Support, configure, and enhance FactoryTalk HMI/SCADA platforms., • Analyze system performance and implement control system improvements to enhance operational reliability., • Provide technical support for equipment commissioning, upgrades, and automation projects. Maintenance & Operational Support • Provide advanced technical expertise to maintenance personnel in diagnosing and correcting electrical, mechanical, and controls-related issues., • Support preventive and predictive maintenance programs to improve equipment uptime and reduce unplanned downtime., • Participate in root cause analyses and develop sustainable corrective actions. Project Management • Manage engineering and automation projects from concept through implementation, including scoping, budgeting, planning, and execution., • Coordinate with internal stakeholders, contractors, and vendors to ensure timely project completion., • Maintain proper documentation and ensure compliance with corporate, regulatory, and safety requirements. Systems, Data, and Technology Integration • Utilize SQL to extract data, analyze trends, and support system integrations., • Experience with Ignition SCADA is considered a strong asset., • Support data-driven decision-making and digital transformation initiatives within the facility. Compliance & Safety • Ensure adherence to all food safety, OSHA, regulatory, and company standards., • Support audits, documentation reviews, and engineering change management processes., • Promote and maintain a safe working environment through proactive risk assessments and compliance efforts. Required Qualifications • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, or a related technical discipline., • Minimum of 5 years of experience in automation, plant engineering, or manufacturing engineering., • Proficiency with PLC programming (Allen-Bradley / RSLogix 5000 / Studio 5000)., • Experience with Rockwell FactoryTalk HMI/SCADA systems., • Demonstrated experience in maintenance management or supporting maintenance operations., • Strong communication skills (written and verbal) with the ability to partner effectively across departments., • Proven ability to lead and manage engineering projects. Preferred Qualifications • Experience in food manufacturing or regulated production environments., • Knowledge of high-speed packaging equipment., • Experience working with SQL databases., • Exposure to Ignition SCADA platforms., • Familiarity with Lean Manufacturing, Six Sigma, or similar continuous improvement methodologies. Key Competencies • Strong analytical, diagnostic, and problem‑solving skills, • Detail-oriented with a hands-on approach, • Ability to manage multiple priorities effectively, • Strong leadership and cross-functional collaboration skills, • Commitment to safety, quality, and operational excellence

Job Description Hi, we're Nuts.com! Nuts.com is a self-funded, profitable, rapidly growing multi-channel DTC specialty food and wellness company with over 550 people on our team. We're changing the landscape of snacking on nuts, dried fruit, chocolate and more! We planted our roots in Newark, New Jersey during the Great Depression, selling premium nuts on Mulberry Street's open-air market. We've come quite a long way since then, taking our multi-generational family business online in 1999. Even after 97 years, we continue to pride ourselves in expertly sourcing the highest quality foods and treating our customers like family. What's our team like? We're driven, collaborative and entrepreneurial. Energy and passion power our business and we look for candidates who share in that excitement to help us continue to build something special. The role: We are hiring an Industrial Maintenance Technician with strong experience in conveyor systems, industrial controls, and food packaging equipment. This is a hands-on technician role within our maintenance team. While the title remains Industrial Maintenance Technician, this position will serve as a technical backbone of the operation, owning complex troubleshooting, supporting automation systems, and driving equipment uptime across conveyors, packaging equipment, and facility systems. The primary focus is conveyor and controls troubleshooting, with additional responsibility for packaging machinery and general facility maintenance. As we grow our fulfillment and automation footprint, conveyor reliability, packaging performance, and controls competency are critical to our operation. This role plays a key part in reducing downtime, improving system stability, and strengthening our overall maintenance capability. You won't just be fixing equipment. You'll be helping build a more reliable and scalable operation. This is a full-time position with scheduled hours of 7:00 a.m. to 5:30 p.m. on Monday, Tuesday, Thursday, and Friday. The schedule may be subject to change based on organizational and operational needs. How you'll make an impact: Conveyor & Material Handling Equipment (MHE) • Perform preventive and corrective maintenance on conveyor systems, including belts, rollers, pulleys, gearboxes, drives, and motors, • Troubleshoot electrical components such as photoeyes, proximity sensors, motor starters, contactors, and Variable Frequency Drives (VFD), • Diagnose system-level material flow issues to minimize downtime and prevent recurring failures, • Troubleshoot equipment faults using Programmable Logic Controllers (PLC) (programming not required, but logic comprehension expected), • Read and interpret electrical schematics, ladder logic, and control drawings, • Support troubleshooting of motor controls, safety circuits, relays, and distributed input/output systems, • Maintain and troubleshoot food packaging equipment, including pre-formed baggers, vertical form fill and seal (VFFS) machines, and pouch sealers, • Diagnose issues related to sealing systems, film tracking, forming tubes, temperature control, and pneumatic components, • Support warehouse automation systems, including robotics and Automated Storage and Retrieval Systems (ASRS), • Assist with installation, commissioning, and ongoing reliability improvements, • Perform maintenance on pumps, motors, and mechanical drive systems, • Support basic Heating, Ventilation, and Air Conditioning (HVAC) systems, • Complete general facility repairs as needed (mechanical, minor electrical, structural), • Follow Occupational Safety and Health Administration (OSHA) standards, • Adhere to Good Manufacturing Practices (GMP) and food safety requirements, • Follow Lockout/Tagout procedures and maintain safe work practices, • Bi-lingual in English and Spanish is strongly preferred, • 6+ years of industrial maintenance experience in a distribution, fulfillment, or food manufacturing environment, • Strong mechanical and electrical troubleshooting capability, • Deep hands-on experience with conveyor systems and material handling equipment, • Working knowledge of Programmable Logic Controllers (PLC) and industrial control systems, • Experience reading electrical schematics and ladder logic, • Experience maintaining food packaging equipment (VFFS, pre-formed baggers, pouch sealers), • Familiarity with robotics, automation systems, or Automated Storage and Retrieval Systems (ASRS) preferred, • Experience with Variable Frequency Drives (VFD), motors, pumps, and pneumatic systems, • Ability to independently diagnose complex equipment failures, • A high-growth and rewarding role in a foundationally strong and rapidly evolving business, • Hourly Pay Range: $25 - $35/hour based on experience, • Excellent benefits including a 401K Match, • Paid Maternity, Adoption and Paternity leave, • And all the Nuts.com snacks your heart desires + a 40% employee discount EEO STATEMENT Nuts.com is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, immigration status, age, sex or gender (including pregnancy), gender identity or expression (including transgender status), sexual orientation, marital status, veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws. Applicants with disabilities who require assistance or accommodation during the application or interview process should reach out to us at

Job Description Maintenance Technician – Food Manufacturing Location: [City, State] Job Type: Full-Time Industry: Food Manufacturing / Processing Position Overview We are seeking a skilled Maintenance Technician to support production and packaging operations in a food manufacturing facility. This role is responsible for preventive maintenance, troubleshooting, and repair of manufacturing and packaging equipment to ensure safe, efficient, and compliant production. The ideal candidate has hands-on mechanical and basic electrical experience, understands food-grade environments, and can respond quickly to minimize downtime. Key Responsibilities • Perform preventive and corrective maintenance on food processing and packaging equipment, • Troubleshoot mechanical, electrical, pneumatic, and hydraulic issues, • Maintain and repair conveyors, fillers, sealers, mixers, ovens, and packaging machinery, • Respond to equipment breakdowns and production support calls, • Perform machine setups, changeovers, and adjustments, • Conduct equipment inspections to ensure reliability and safety, • Read and interpret mechanical drawings and electrical schematics, • Document maintenance activities using CMMS or work order systems, • Follow GMP, HACCP, and food safety requirements, • 2–5+ years of maintenance experience in a food, beverage, or consumer goods manufacturing environment, • Strong mechanical troubleshooting skills, • Basic electrical knowledge (motors, sensors, wiring, controls), • Experience with conveyors and packaging machinery, • Ability to work independently and as part of a team, • Experience with high-speed packaging lines, • Pneumatic and hydraulic system knowledge, • PLC troubleshooting exposure (not programming-heavy), • Familiarity with FDA-regulated or GMP environments, • Welding or fabrication experience

Job DescriptionDescription: Position Summary: To maintain factory equipment and machinery based on input from department supervisors, technicians, engineers, and maintenance managers. This includes installing and maintain standard and custom equipment and machines as required to specification. Job Elements or Tasks: • Perform PLC implementation and programming, • Perform regularly scheduled backups of all PLC programs, • Create and back-up all ladder logic diagrams and drawings required for production equipment, • Maintain Electro-Pneumatic controls, fluid power transmissions, and hydraulics, • Ensure work is in compliance with all OSHA and NEC regulatory policies and procedures, • Specify and identify materials and other items required to perform the job, • Complete jobs within a specified time frame · Assist in project management, • Maintain work area to ensure it is safe, clean, and efficient · Maintain spare parts inventory in main location and satellites, • Participates in cross-training efforts, • Keep accurate records of all jobs worked, • Must be available for emergency callouts 24/7, • Perform other maintenance duties and activities as required, • Perform all daily maintenance functions and 5S requirements (i.e. clean and sweep area), • Enter data in Upkeep and Synerion, and close work orders as required, • A high level of engineering principles theory and knowledge, equivalent to a 4-year technical college education. Additionally, 7 to 10 years of related experience are required., • Experience working with PLCs, • Ability to read, interpret, and modify schematics and ladder logic diagrams., • Broad judgment, initiative, and ingenuity with a moderate degree of physical demand when performing the job., • Perform work in physically demanding conditions with periods of heavy lifting greater than 50 lbs., • Ability to work in conditions that include exposure to various types of elements such as cold, heat, noise, dust, oil, cleaners, etc The estimated annualized base salary range for this role is $33 - $38 an hour. Compensation will vary based on skills and experience. New employees are eligible to participate in a robust benefits package on the first day including medical, dental, vision, FSAs, generous 401k contribution, paid holidays, vacation and sick leave, professional development, and more.

Job DescriptionBenefits: • 401(k), • Dental insurance We are seeking a talented Commercia Laundry Mechanic to join our team. The Commercial Laundry Mechanic has overall responsibility for the daily repair and preventative maintenance of industrial textile processing equipment and facility maintenance. The Commercial Laundry Mechanic ensure that tasks such as start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, or other systems are completed according to policies and procedures. As well as completing daily production workload in a timely manner, consistently providing quality standards in all areas of laundry operations. Duties include but are not limited to: • Maintain, service, and repair all models of commercial laundry equipment including but not limited to washers, driers, ironers, boilers, extractors, presses, stackers, and other machinery used., • Troubleshoot electrical, mechanical, and plumbing, issues and rebuild pumps, valves, regulators as needed while utilizing an excellent understanding of steam/thermal systems., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Inspect, maintain, repair, and service water treatment plant machinery and equipment, including pumps, valves, valve actuators, motors, engines, meters, drives, tanks, reservoirs, compressors, chemical feed and storage systems, UV disinfection systems, heating and air conditioning systems, and other equipment typical of a water treatment facility., • Install and rebuild pumps, motors, piping systems, and specialized water treatment equipment., • Fabricate parts and equipment; operate welding, cutting, and general fabrication equipment., • Pack, lubricate, clean, and paint mechanical equipment and motors., • Inspect newly installed mechanical equipment to ensure safe and satisfactory operation and functionality., • Ensures work is performed safely and efficiently., • Read and interpret technical operation and repair manuals., • Effectively participate with preventive maintenance schedule on all laundry equipment., • Establish an organized laundry inventory system for purchasing of all parts & materials., • Provide technical training to the laundry team. Maintain a constant awareness of safety problems and report unsafe conditions and exposures to laundry manager., • Must understand and adhere to all safety procedures., • Effectively manage daily maintenance requests to minimize equipment down-time and continually improve operational processes., • Strictly adhering to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Keep accurate and timely records of maintenance performed., • Follow written and verbal instructions and perform other tasks as directed by supervision., • Interact with all colleagues in a professional manner, • Comply with all Federal, State and local laws., • Working on boiler and fan systems, • Maintaining logs, records and reports of serviced equipment, • Qualifications:, • Minimum of 3 years hands on experience in a laundry maintenance or similar operation, • Must be able to maintain high levels of confidence., • Maintain a working knowledge of policies and procedures and their proper application., • Minimum of five years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Quantifiable working knowledge of Weishi systems, dyers, folders, sorting, binding, etc. equipment preferred, • Ability to troubleshoot issues in a timely manner, • Ability to shift priorities and changing demands, • OSHA compliance, • Must be able to stand for long periods of time; able to bend, stretch reach and stoop on a continual basis Typical Physical Activity Standing, sitting, walking, stooping, driving a forklift, working on ladder, being in elevated height to perform work, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, reading, speaking, hearing, and lifting up to 60 lbs. Occasionally stoop, bend, kneel, crouch, crawl, reach, and twist; push, pull, lift, and/or carry moderate to moderately heavy amounts of weights; operate assigned equipment and vehicles; ability to verbally communicate to exchange information. Typical Environmental Conditions Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Water treatment plant and field environment; exposure to noise, dust, grease, fumes, gases, potentially hazardous chemicals, electrical energy, and inclement weather conditions, including hot, cold, wet, and/or humid conditions; work around water; work on slippery, uneven, surfaces; work in confined spaces; routinely climb ladders, stairs; regularly work near moving mechanical parts; and work around moderately loud noise levels; incumbents must be available to work variable shifts, including evenings, nights, weekends and holidays.

$32 - $36 per hour // Multiple shifts available // 22 days of PTO // Medical, Dental, Vision, and 401K This Jobot Job is hosted by: Braden Prater Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $32 - $36 per hour A bit about us: Our Client is a growing Food Packaging Manufacturer in Great Atlanta GA. Why join us? Multiple shifts available Scheduled 9-hour shifts. Rotating weekend shifts (8-hour shifts). Average 8–12 hours OT per week. Plenty more if desired. Compensation & Benefits Pay: $32–$36/hr. Benefits: Medical, dental, vision, 401K. 22 days PTO (with floating holidays, accrual-based). 8 recognized holidays. Job Details Job Description SUMMARY The Maintenance Technician II is responsible for performing skilled maintenance and repair work on complex mechanical, electrical, HVAC, and facility systems. This includes troubleshooting and repairing equipment in compliance with standard operating procedures, safety policies, manufacturer specifications, and company requirements. The role also manages spare parts inventory, recommends tools and supply purchases, and supports efficiency improvements within the facility. Additionally, this position provides guidance and oversight for less experienced technicians. ACCOUNTABILITIES Identify, troubleshoot, and resolve mechanical or electrical safety issues. Evaluate equipment and facility needs, recommend solutions, and implement corrective actions to reduce downtime and improve overall efficiency. Maintain purchasing and inventory controls for spare parts, tools, and supplies. Support installations, equipment startups, and ongoing facility projects. Assist with daily and weekly operational support for assets and equipment. Participate in training warehouse and operations personnel as needed. Contribute to special projects and continuous improvement initiatives directed by management. Plan and carry out corrective, preventive, and predictive maintenance activities. EXPERIENCE 3–5 years of experience in industrial or facility maintenance, including work with high-volume conveying systems. 3+ years of experience with PLCs and advanced electrical troubleshooting/repair. Hands-on experience with motors, electrical controls, water systems, large washers, and high-volume operations. Background in welding, pipe installation/repair, and boiler/heating systems. Prior experience performing general facility maintenance such as doors, forklifts, and office infrastructure. SKILLS Strong mechanical and electrical troubleshooting skills. Proficiency with PLC programming and repair. Ability to support and maintain high-volume material handling and conveying systems. Experience with fabrication and facility repair work (welding, piping, heating/boiler systems). Familiarity with maintenance best practices, including preventive and predictive maintenance methods. Ability to mentor and support junior technicians while working in a fast-paced environment. WORK ENVIRONMENT & PHYSICAL DEMANDS Manufacturing or warehouse environment with moderate to high activity levels. Frequent standing, walking, bending, and reaching required. Regular lifting of up to 50 lbs, with occasional lifting up to 80 lbs. Exposure to noise, heat, and moving equipment is common. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

With a passion for life Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers. Are you looking for an inspiring career? You just found it. Job Overview: This position performs installation, maintenance, and repairs of computer driven electro-mechanical production equipment, ensuring that all related quality documentation is executed, while reviewing maintenance procedures for effectiveness. Job Responsibilities and Essential Duties: • Maintenance and repair of computer driven electro-mechanical manufacturing equipment in support of medical device production. o Computer driven systems include proportional-integral-derivative (PID) operating controllers, programmable logic controllers (PLCs), and Human Machine Interface (HMI) automation. o Sub-systems and components include electric drives, motors, electrical wiring, hydraulics, pneumatics, electrical panels, relays, printed circuit board circuitry, vacuum, and compressed air. • Respond to emergency repair requests through troubleshooting, diagnosis, resumption of operation, and electronic documentation., • Execute preventative/scheduled maintenance including planning of materials, parts, training, and other requirements to ensure work is executed in an efficient and timely manner., • Document all work planned and performed in the computerized maintenance management system., • Evaluate operation of equipment and instruments to conduct on-line adjustments. * Evaluate, quote, and order necessary replacement equipment, tools, and fixtures. * May develop or revise documents and procedures., • Build Quality into all aspects of their work by maintaining compliance to all quality requirements. Minimum Requirements : • A high school diploma or equivalent is required. An associate degree or equivalent years of experience in Engineering, Science or related technical field is preferred, • 1-3 years of technician experience in a manufacturing environment is required; experience working in medical device manufacturing or other FDA regulated industry preferred. Required Knowledge, Skills, and Abilities : • Ability to read wiring diagrams, schematics, and plumbing diagrams to expertly troubleshoot electro-mechanical equipment, electric drives, motors, basic wiring, hydraulics, and pneumatics is required., • Working knowledge of flow controls, valve selection, and pressure regulation., • Must demonstrate effective verbal and written communication skills., • Must be well organized and demonstrate the ability to work independently and manage multiple tasks and priorities., • Must be flexible and demonstrate the ability to take initiative., • Working knowledge of equipment powered by 120, 208/230, and 480VAC electrical voltage is required., • Experience with PLC/HMI and MS-DOS programming languages is preferred., • Proficiency with Microsoft Office products such as Word and Excel or equivalent software applications is preferred. The pay for this role is a minimum of $25 per hour ($52k/yr) and a maximum of $33 per hour ($68,640/yr). About us With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries. Benefits at Getinge: At Getinge, we offer a comprehensive benefits package, which includes: • Health, Dental, and Vision insurance benefits, • 401k plan with company match, • Paid Time Off, • Wellness initiative & Health Assistance Resources, • Life Insurance, • Short and Long Term Disability Benefits, • Health and Dependent Care Flexible Spending Accounts, • Commuter Benefits, • Parental and Caregiver Leave, • Tuition Reimbursement Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

Job DescriptionAre you ready to be apart of changing the game for pharmacy automation with next generation solutions? Come join us! Who We Are: ARxIUM is a leader in the development of advanced pharmacy technology and solutions. Here you have the opportunity to work with the best experts in the pharmacy health systems sector paving the way with innovative automation hardware and software technologies. ARxIUM has been providing innovative solutions in the pharmacy automation space for over twenty years and currently serves customers in North America, Europe and Asia. We have offices in Winnipeg and the Chicago Area and work remotely in cities across North America and Europe. ARxIUM is proud to offer the successful candidate • Competitive salary, • Medical/RX/Dental/Vision benefits, • Healthcare and dependent care FSAs, • Company paid Life/ADD insurance, • Company paid STD plans, • Company paid EAP plan, • Opportunity to participate in the company 401k plan with employer match Please note that this position involves travel requirementsWho We're Looking For: • Diploma or degree in a technical field including, but not limited to: mechanical, electrical, computer, biomedical., • 3 - 5 years experience programming Allen-Bradley PLCs., • Conveyor and Automation experience., • Engineering and Electrical experience., • 7+ years of direct field service (or equivalent) experience troubleshooting and repairing computerized electro-mechanical systems., • 7+ years of experience working in a service capacity with direct customer interaction.What You'll Be doing:, • Perform software and hardware preventive and corrective maintenance., • Perform software and hardware emergency break fix service calls., • Refines and validates PLC Coding., • Works with the facility to schedule appropriate downtime for preventive and corrective maintenance., • Responsible for timely and accurate completion of all paperwork and reports. This includes ticket updates and closures, expenses, timesheets and other administrative requirements., • Responsible for following up on open issues, tickets and escalations., • Working Outside normal business hours may required to service products., • Performs other duties as required. Take a look at your potential career with ARxIUM and apply today. WE would love to meet you! Powered by JazzHR bwrOSlqGzr

Job DescriptionAbout UsWe are a rapidly growing food manufacturer specializing in ready-to-eat meals, salads, and side dishes. As we expand into a new facility, we’re hiring a hands-on Electrical & Mechanical Technician who can keep production running by physically troubleshooting, repairing, and maintaining machines on the floor. This is a full-time, first-shift role (7:30 AM–around 5:00 PM). This position is for someone who’s most comfortable with tools in hand and panels open—tracking down failures, replacing components, rebuilding assemblies, and getting equipment back online quickly and safely. You’ll work on conveyors, motors, pumps, sensors, pneumatics, and automated equipment, and you’ll also handle electrical troubleshooting across 120V/208V/240V/480V systems. PLC/VFD familiarity is important, but the core need is a technician who can fix what’s broken and prevent it from breaking again. Electrical license/certification is a plus. Job SummaryWe’re seeking an experienced Electrical & Mechanical Technician to support day-to-day production by diagnosing issues, repairing equipment, and performing preventive maintenance. You will be the person who responds when a line is down—locating the fault, repairing or replacing the failed part, verifying safe operation, and documenting the fix. You’ll work closely with operations and maintenance to improve reliability, reduce downtime, and keep equipment operating safely and consistently in a food manufacturing environment. The ideal candidate is practical, calm under pressure, and confident working independently on mechanical and electrical repairs in a fast-paced facility. Responsibilities • Diagnose, troubleshoot, and repair electrical and mechanical issues on food manufacturing equipment., • Work with PLCs, VFDs, motors, sensors, and automation controls to maintain and improve production efficiency., • Perform electrical installations, modifications, and upgrades for systems operating at 120V, 208V, 240V, and 480V., • Ensure compliance with all applicable electrical codes, safety standards, and best practices., • Collaborate with cross-functional teams to implement new machinery and automation projects., • Maintain detailed maintenance records and electrical schematics., • Provide technical support to production and maintenance staff., • Assist in developing preventive and predictive maintenance programs for electrical and automation systems. Qualifications • Bachelor’s or Master’s degree in Electrical Engineering or equivalent technical training with relevant manufacturing experience., • Strong knowledge of industrial electrical systems and codes, including 120/208/240/480V applications., • Hands-on experience with PLC programming, troubleshooting, and integration., • Familiarity with VFDs, motors, conveyors, packaging machinery, and related food manufacturing equipment., • Ability to read and interpret electrical schematics and mechanical diagrams., • Electrical license or certification strongly preferred., • Strong organizational and problem-solving skills., • Ability to multitask and prioritize in a dynamic production environment.

Job Description Job Title: Maintenance Mechanic Job Description We are seeking a dedicated Maintenance Mechanic for our weekend night shift. The ideal candidate will have experience in troubleshooting and repairing manufacturing equipment, and will be responsible for performing repairs and preventative maintenance on facility and manufacturing equipment. You will work closely with the Senior Maintenance team to ensure the smooth operation of plant mechanical and building equipment. Responsibilities • Assist Senior Maintenance in maintaining plant mechanical and building equipment., • Install piping and mechanical equipment as directed., • Troubleshoot and repair routine mechanical failures or malfunctions., • Acquire knowledge of hydraulic and pneumatic systems., • Assist in construction and repair of all plant equipment., • Keep records as required., • Perform duties of a B Maintenance Mechanic., • Perform other duties as assigned by supervision., • Experience with robotic controllers, pneumatic and hydraulic modules, electromechanical sensing, and automated systems., • Ability to read and interpret schematics., • Proficiency in PLC programming and troubleshooting., • Strong mechanical and electrical skills., • Ability to perform preventive maintenance and repairs., • Knowledge of pneumatics, hydraulics, and blueprint interpretation., • Must have a high school diploma or equivalent., • Minimum of 6 years of work experience in a manufacturing environment in an Electrician role., • PLC experience is a plus., • Ability to interpret blueprints. Join a company that values stability and offers competitive pay along with a comprehensive benefits package. Enjoy benefits such as paid vacation based on service length, 13 paid holidays per year, and a 401(k) Retirement Savings Plan with potential company match. Receive medical, prescription drug, dental, and vision benefits upon hire. Benefit from an Employee Assistance Program, tuition assistance, and a free fitness center membership. External candidates are eligible for a $2500 sign-on bonus after 90 days of employment. Work Environment Work in a heavy industrial casting plant where you may be exposed to elements when walking between buildings. The role requires adherence to safety protocols and maintaining a clean and orderly work environment. Job Type & Location This is a Permanent position based out of Clifton, NJ. Pay and Benefits The pay range for this position is $69825.00 - $69825.00/yr. Benefits: You will be eligible to participate in the Company’s employee benefit plans offered at your location, including health care, life insurance, and disability coverage. Details of these plans will be sent to you separately upon hire or completion of probationary period if applicable. 401k Plan: The Company offers a tax qualified 401(k) savings plan to help you save toward retirement. Details will be sent to you separately and are subject to plan terms and conditions. Current company contributions are: • 3% of your eligible compensation regardless of whether you contribute to the plan, and • 100% of your deferred pre-tax savings up to 6% of your base pay. Vacation: • You will be eligible for 10 days of paid vacation per year, accrues as per policy (prorated based on your hire date) in accordance with the Company’s Vacation Policy, in addition to Company recognized holidays. Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Apr 10, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Electrical, Controls Engineer - Industrial Electro-Mechanical Machinery Industry Focus: Industrial Machinery I Electromechanical Equipment I Custom Automation Systems Robotics I Industrial Controls I Food and Beverage Manufacturing I Packaging Equipment I Water and Wastewater Treatment I Process Equipment I OEM Machine Building We are currently seeking to identify (2) Electrical Controls Engineers to join a well-established and growing industrial equipment manufacturer with over 50 years of engineering excellence. One opportunity is ideal for a junior to mid-level candidate with at least 2+ years of relevant experience, and the other is targeted for a senior-level engineer with more years of hands-on experience in electrical design, programming, controls, and industrial automation. This is your chance to join a team that builds large-scale electromechanical systems from concept through completion. From food production lines to custom process and water treatment equipment, you'll be working on machinery that makes a real-world impact. Responsibilities: · Design, develop, and program industrial electrical control systems to meet engineering and client requirements · Create electrical schematics, wiring diagrams, and panel layouts using AutoCAD Electrical or similar design software · Specify, select, and configure control system components such as PLCs, VFDs, relays, sensors, and breakers · Program PLCs and HMIs (Allen-Bradley, Siemens, or similar platforms preferred) · Layout and design control panels and motor control centers (MCCs) · Perform validation testing and troubleshoot electrical systems during build and final assembly · Collaborate closely with mechanical engineers, software engineers, and production teams to ensure full integration · Provide technical documentation including BOMs, manuals, wiring lists, and startup procedures · Travel as needed for commissioning and system validation (minimal and planned in advance) · Stay current with evolving industry technology, best practices, and safety standards Qualifications: We are hiring for two experience levels. Candidates must meet the criteria for one of the following profiles: Junior to Mid-Level Role: · Minimum 2 years of experience in electrical controls, panel design, or related engineering environment · Experience with AutoCAD Electrical or similar drafting tools · Working knowledge of industrial components and safety regulations · Basic PLC programming knowledge or exposure to automation software · Strong interest in hands-on engineering, testing, and troubleshooting · Bachelor's degree in Electrical Engineering or equivalent hands-on experience Senior-Level Role: · Experience in electrical controls and industrial automation · Proficiency in AutoCAD Electrical and strong PLC/HMI programming experience · Deep understanding of UL, NEC, NFPA 70E, and electrical safety standards · Demonstrated success leading projects or contributing to complex custom machinery builds · Ability to mentor junior team members and drive design improvements · Background in electromechanical system design and manufacturing support What Makes This Opportunity Unique: · Privately owned and financially strong company with over 50 years of proven success · All engineering and manufacturing is done in-house at our US-based facilities · Recession-resistant with projects in food processing, water treatment, packaging, and more · Work directly on high-impact custom systems from design to completion · Short lead times and an integrated design-build process · Access to a seasoned engineering team for mentorship and collaboration · Competitive salary structure with performance bonuses · Opportunities for growth into technical leadership or project management · Continued access to learning and development in electrical, automation, and mechanical engineering · Team-focused culture that values practical problem-solving, quality, and innovation Traits That Set You Up for Success: · Detail-oriented and self-driven with a strong sense of accountability · Hands-on mindset and curiosity to understand how systems work · Enjoy working on one-off and custom systems that challenge your engineering creativity · Collaborative and open communicator, ready to share and receive feedback · Willing to dive into troubleshooting and help bring machines across the finish line · Honest, reliable, and committed to continuous improvement Take the Next Step in Your Career: If you are passionate about industrial electrical systems and automation, whether you are building your skills or bringing a wealth of experience, we want to hear from you. These roles offer the chance to work on meaningful projects with a stable, growing company where your contributions matter every day. Apply now to explore how you can be a part of building the next generation of industrial automation and electromechanical systems. Equal Opportunity Commitment: We and our client are equal opportunity employers and welcome all qualified applicants regardless of race, religion, gender, age, disability, veteran status, or any other protected classification.

Job Description At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz. As a Controls Systems Technician, you will work with the maintenance team to maintain and repair conveyance, automation and facilities equipment to support operations uptime and improve reliability of our systems. This role is the resident expert in controls, PLCs, communication protocols, and automation. Shift: Sunday to Wednesday - 9:00pm to 7:30am You will... • Maintain compliance with all safety, food safety, and security standards. ● Perform preventive maintenance and routine inspections on assigned automation, robotics and control panels., • Perform troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or vendors as needed for additional troubleshooting., • Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate., • Mentor all maintenance personnel in developing appropriate skill sets and knowledge of equipment specializing in automation, controls and robotics., • Lead root cause analysis of major downtime events., • Act as a network resource for technical issues and lead network-wide root cause analysis., • Develop maintenance personnel knowledge on intermediate to advanced automation, controls and robotics., • Partner with engineering on commissioning of new controls systems., • Audit vendor work to provide feedback to leadership on quality of work and SLA performance., • 4 - 6 years of experience with conveyor, automation, robotics, PLC troubleshooting/programming, communications protocols (Profi, DeviceNet, Ethernet TCP/IP etc.)., • Advanced understanding of PLCs and automated processes., • Advanced computer skills., • Ability to read and understand drawings, schematics and diagrams. ● In depth experience working with PLCs, HMIs, VFDs etc. to include programming, troubleshooting, repair and maintenance., • Ability to travel as necessary (up to 10%) for business purposes., • High School diploma or equivalent., • Excellent follow through, judgment, and common sense. "Make it happen" attitude., • Competitive hourly rate, 401K company match that vests immediately upon participation, • Generous PTO and additional sick leave, • Comprehensive health and wellness benefits with options at $0 monthly, effective first day of employment, • Up to 85% discount on subscriptions to HelloFresh meal plans (HelloFresh, Green Chef, Everyplate, and Factor_), • Access to Employee Resource Groups that are open to all employees, including those pertaining to BIPOC, women, veterans, parents, and LGBTQ+ At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Company’s commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities. We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form. To learn more about what it's like working inside HelloFresh, follow us on Instagram and LinkedIn. HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at:

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking highly skilled and motivated technicians to join our rapidly growing team. The Engineering Technician will be at the forefront of bringing our innovative designs to life. You will be responsible for hands-on fabrication, assembly, and testing of critical hardware including superconducting magnets, high vacuum and cryogenic equipment, electromechanical systems, and other associated hardware. You will be expected to work with a high degree of autonomy, troubleshoot complex problems, and contribute to the continuous improvement of our processes. If you are passionate about building cutting-edge technology and thrive in a fast-paced environment, we want to hear from you. Key Responsibility Areas: • Build, operate, maintain, and troubleshoot complex mechanical and electrical systems, • Assist in developing new equipment, tools, procedures, and inspection techniques to reduce production time while maintaining high quality, • Responsible for tool and workspace organization and maintenance, • Assemble and troubleshoot test articles and supporting test equipment, • Collaborate to support development of manufacturing processes and tooling Required Experience & Skillsets:, • High-school diploma or equivalent, • 5+ years of experience in shop fabrication, manufacturing, research, or high-tech industry, • 5+ years of technical experience with any of the following:mechanical or electrical systems, high pressure or high vacuum systems, cryogenic systems, plumbing, soldering, system testing, power or controls systems, • Comfortable working to aggressive deadlines and exceptional work ethic, • Proficiency with Microsoft Office suite tools or similar software Ideal Experience:, • Knowledge of quality control and inspection procedures, • Experience operating, maintaining, or troubleshooting or programming automation equipment, e.g. PLC, HMI, or process controllers, • Experience with reflow solder processes, including PCBA manufacturing, • Crane or lifting experience, • Forklift experience, • Experience with electrical schematic and wiring, • Experience using various types of hand tools and precision measuring tools, • Experience in documenting, improving, and implementing process instructions, • Experience with reading and reviewing mechanical drawings, • Experience with machining, operating manual milling, saws, and other toolsCompany Benefits:, • Hourly rate $30-43/hr, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description Unique Opportunity with an expanding New Jersey Based Company; Bright and Collaborative Team; New and Interesting Automation System Design and Build Projects. Recession Resistant Industry, Managerial Buy-In towards using best of breed technology to provide top-notch solutions for our essential industry customers. About the role: The PLC Automation Controls Engineer specializes in designing, building, and optimizing automation control systems within a small dedicated team. This role focuses on new system design and build projects as well as system upgrades and optimization, reporting directly to the Engineering Manager. The engineer will develop and integrate PLC programming, HMI interfaces, and network configurations, ensuring seamless electrical automation operations. Desired Skills/Experience: • PLC Systems Design and Engineering experience; should be versed in Ladder Logic., • Experience with HMI Systems Software and user interfaces including customization, configuration and connectivity to the overall system; experience with Intellution (aka: iFIX) and or Wonderware (aka: InTouch) are pluses., • Experience designing systems with Electric Power Scaling to 'Step Up Power and Step Down Power'; should be familiar with Voltage Regulation, Dynamic Response, Impedance Regulation, Power Conditioning/Power Modulation or similar areas., • Experience using Electrical AutoCAD for layout and overall systems design (and customization), • Experience configuring and connecting industrial network communications to PLC Systems; should be familiar with things like EtherNet/IP, Profinet, EtherCAT, Modbus RTU, CanOpen or similar., • Experience with Data or Database connectivity to PLC Automation systems; should be familiar with OPC Servers, PC Drivers/Custom Scripts, PLC-to-SQL modules or similar, • Detail Oriented with Very Strong Oral and Written communication skills, • Experience Designing/Building Electrical Automation Systems for External clients or customers is a plus.

Job DescriptionControls/Automation Engineer Controls/Automation Engineer Position Overview We are seeking a skilled Controls/Automation Engineer to design, develop, and implement control systems and automation solutions for our manufacturing processes. The ideal candidate will work closely with cross-functional teams to enhance system performance and ensure compliance with industry standards. Key Responsibilities • Design and develop control systems and automation solutions using Allen Bradley and ControlLogix platforms., • Program and configure PLCs and HMIs to optimize manufacturing processes., • Conduct system commissioning and validation for new and existing control systems., • Collaborate with engineering teams to create and update P&ID, schematics, and wiring diagrams., • Implement SCADA solutions using iFix and Wonderware for real-time data monitoring and control., • Perform data exchange between control systems and enterprise systems using SQL and other protocols., • Troubleshoot and resolve issues with control systems, ensuring minimal downtime., • Support validation efforts in compliance with pharmaceutical and manufacturing regulations., • Bachelor's degree in Electrical Engineering, Automation Engineering, or a related field., • Proven experience as a Controls Engineer or Automation Engineer in an industrial environment., • Strong knowledge of PLC programming (Allen Bradley, ControlLogix) and HMI development., • Familiarity with SCADA systems like iFix and Wonderware., • Experience with control system design, commissioning, and validation processes., • Understanding of pneumatic and hydraulic systems., • Proficient in reading and creating P&ID, schematics, and wiring diagrams. • Medical, Dental, Vision, • 401(k), • PTO, • Paid Maternity Leave, • and much more!, • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 03/25/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionAre you ready to be apart of changing the game for pharmacy automation with next generation solutions? Come join us! Who We Are: ARxIUM is a leader in the development of advanced pharmacy technology and solutions. Here you have the opportunity to work with the best experts in the pharmacy health systems sector paving the way with innovative automation hardware and software technologies. ARxIUM has been providing innovative solutions in the pharmacy automation space for over twenty years and currently serves customers in North America, Europe and Asia. We have offices in Winnipeg and the Chicago Area and work remotely in cities across North America and Europe. ARxIUM is proud to offer the successful candidate • Competitive salary, • Medical/RX/Dental/Vision benefits, • Healthcare and dependent care FSAs, • Company paid Life/ADD insurance, • Company paid STD plans, • Company paid EAP plan, • Opportunity to participate in the company 401k plan with employer match Please note that this position involves travel requirementsWho We're Looking For: • Diploma or degree in a technical field including, but not limited to: mechanical, electrical, computer, biomedical., • 3 - 5 years experience programming Allen-Bradley PLCs., • Conveyor and Automation experience., • Engineering and Electrical experience., • 7+ years of direct field service (or equivalent) experience troubleshooting and repairing computerized electro-mechanical systems., • 7+ years of experience working in a service capacity with direct customer interaction.What You'll Be doing:, • Perform software and hardware preventive and corrective maintenance., • Perform software and hardware emergency break fix service calls., • Refines and validates PLC Coding., • Works with the facility to schedule appropriate downtime for preventive and corrective maintenance., • Responsible for timely and accurate completion of all paperwork and reports. This includes ticket updates and closures, expenses, timesheets and other administrative requirements., • Responsible for following up on open issues, tickets and escalations., • Working Outside normal business hours may required to service products., • Performs other duties as required. Take a look at your potential career with ARxIUM and apply today. WE would love to meet you! Powered by JazzHR PRJG0DwetP

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Oversee survey, design, installation, and commissioning of metering equipment and data gathering hardware. Manage contractor work, conduct system commissioning/start-ups, provide O&M training, and identify improvement opportunities. Primary Duties/Responsibilities: • Commission and start-up utility grade metering equipment., • Engineer and design advanced metering systems., • Review project plans and specifications., • Conduct on-site surveys with operating personnel and contractors., • Perform lab testing for troubleshooting/optimization., • Troubleshoot, inspect, and rebuild field equipment., • Create documentation, procedures, and reports., • Work on multiple concurrent projects., • Proficient in AutoCAD and MEP drawings., • Basic network understanding and troubleshooting.Qualifications Education/Experience/Background: • BS in Electrical Engineering, Computer Engineering, Computer Science, or related field (strongly preferred)., • AutoCAD or Visio experience for design documents., • Control systems and/or DCS implementation and support experience., • PLC and logic programming, configuration, and support experience., • Database/SQL queries experience., • PC/server configuration, thin client systems, VMware experience., • Energy industry experience., • IT/OT integrated environment experience., • 3-5 years of experience, • Thorough understanding of electric circuits and diagram interpretation., • Network communications and OT cybersecurity knowledge., • Strong communication skills (verbal and written)., • Ability to work independently and manage multiple projects., • High degree of professionalism., • Team collaboration skills., • Control panel design and wiring understanding., • Plant instrumentation knowledge. Additional Information Pay Range: $75000 to $85000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking an Senior Application Engineer to be responsible for initial consultation with the customer, as well as estimating and proposal development for industrial automation solutions including food & beverage, life sciences, and chemical industries. The projects span the range of process control and machine control automation applications. You will also own and develop methods, tools, and processes in estimating and proposal development for the entire enterprise. You will: • Meet with customers to review the technical scope and engineering requirements and work with local E Tech Group Business Development Managers in the sales pursuit process., • Prepare work to be estimated by gathering proposals, blueprints, specifications, and related documents., • Quote normal Control Panel / PLC / HMI projects without much assistance, calling in engineering help only for niche cases., • Identify labor, material, and time requirements by studying proposals, blueprints, specifications, and related documents., • Compute costs by analyzing labor, material, and time requirements., • Resolve discrepancies by collecting and analyzing information., • Present prepared estimate by assembling and displaying numerical and descriptive information., • Prepare special reports by collecting, analyzing, and summarizing information and trends., • Maintain cost database by entering and backing up data., • Maintain technical knowledge by attending educational workshops and reviewing technical publications., • Contribute to team effort by accomplishing related results as needed., • Bachelor's degree in Engineering or equivalent experience and educational background, • 5+ years of Industrial Automation experience directly related to design, controls, programming, and electrical engineering, • Past experience of extensive use of the Company's Methods, Tools, and Process specific to estimating and proposal management standards., • Understanding of ERP / Project Costing Systems and parametric estimation tools., • Extensive understand of customer plans, specifications, technical documentation as well as RFQ documentation, • Strong written and verbal communication skills, • A DNA comprised of collaboration and teamwork Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes full paid vacation, paid holidays, paid family leave and personal/sick time off.

Job Description Role Purpose: Effective utilization of all Electrical Mechanical Engineering skills to improve our operations, machinery, controls, through the installation of upgrades in PLC, pump controls, systems controls, diagnostics and troubleshooting to improve the daily operation of a High-Quality Foam Production and Fabrication Plant. Responsibilities: · Manage projects assigned by management · Manage engineering and maintenance budgets · Oversees ERMs initiatives · Participate in all new equipment evaluations and recommendations · Working knowledge of Hydraulic, Pneumatic, and Mechanical systems · High level of adaptability and foresight for innovative approaches to problem solutions · Ability to understand and communicate the priorities of our operations · Identification of problem, analysis, and the institution of corrective actions · Assist and/or coordinate complex system of troubleshooting efforts · PLC Programming, Diagnostics, Troubleshooting and Repair · Upgrade current electrical equipment and services · Diagnostic of machinery electrical problems · Design and development of machine control systems to improve operation and reliability · Provide input, supervision, and execution of various new equipment installations and integrations · Supervise hourly employees in the execution of their daily duties and contractors during equipment installations · Formulate and recommend electrical / mechanical improvements and modifications to achieve optimum efficiency · Participation in all new product/process installations · Proposal and purchase of necessary equipment · Maintain a safe and clean environment for all employees while enforcing GMP's and good housekeeping · Serve as coach and mentor to Employee Involvement Teams as required · Executes the necessary action needed to maintain the production of a quality of our products while lowering the total cost of production · Conducts training and motivation to the employees by coaching to improve their efficiency and effectiveness · Define objectives and provide guidance to subordinates · Leads departmental meetings Qualifications: · Working knowledge of Mechanical, Electrical, Pneumatic and Hydraulic Equipment · Knowledge of all types of fabrication, processing machinery, and equipment · Ability to understand and communicate the priorities of the manufacturing operation. · Perform 'hands on' direction to all maintenance workers and employees · Above average diagnostic skills, where a controlled methodical approach is taken to problem solving and troubleshooting · A high level of adaptability and foresight for an innovative approach to new product launches · Sophisticated programming and troubleshooting skills for programmable logic controllers · Bachelor's degree (B. S.) from four-year College or university and five years related experience and/or training or equivalent combination of education and experience · 5 – 8 years related work experience Company DescriptionWoodbridge is a privately-owned company offering innovative material technologies for applications in automotive, commercial, recreational, packaging, healthcare and building products. In addition to manufacturing operations, the company also offers a full array of services including chemical research and development, product and process engineering, tooling, technical support and accredited laboratory testing. Woodbridge operates more than 60 facilities across 10 countries—employing over 7,500 teammates and serving more than 600 customers worldwide.Woodbridge is a privately-owned company offering innovative material technologies for applications in automotive, commercial, recreational, packaging, healthcare and building products. In addition to manufacturing operations, the company also offers a full array of services including chemical research and development, product and process engineering, tooling, technical support and accredited laboratory testing. Woodbridge operates more than 60 facilities across 10 countries—employing over 7,500 teammates and serving more than 600 customers worldwide.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. The Senior Controls / Automation Engineer role requires an individual have a diverse engineering skill set with the ability to work independently to perform all aspects of process automation engineering and system integration, including initial concepts, specifications, design engineering, documentation, project implementation, testing, startup, and training of operating and maintenance personnel. You will be a key member of a diverse team of professionals developing solutions for our client's most complex automation challenges. Location: Regional Southern CT / Tarrytown area travel to sites You will: • Lead or work on a project team responsible for the design, configuration, and testing of continuous and batch control applications., • Understand the project scope and financials and exercise good time management skills to plan & coordinate the work as part of a project team by developing project schedules and budgets in collaboration with project leadership and identify change orders and justify changes to Project Management ensuring completion of all project deliverables to the satisfaction of the client., • Anticipate and provide solutions to project leadership and/or customer giving high priority to customer satisfaction offering strong technical expertise and advisement as part of the project team., • Adapt to a flexible work schedule & travel, if necessary, to participate in the design, development, and start-up of control systems at the client's facility., • Act as an automation Subject Matter Expert, • Hands on experience executing automation projects for process plants, minimum of 3-5 years in industry, preferably in Life Sciences domain., • BS Engineering degree or equivalent educational background, • Detail oriented with strong technical aptitude and desire for learning new technologies, • Knowledge of industry and regulatory standards, design criteria and codes relevant to Instrumentation and Controls, • ISA S88 Batch standard, • ISA S95 Controls System Architecture standard, • GAMP 5 & cGMP, • 21 CFR Part 11, • Demonstrated ability to develop process control system applications, utilizing Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems, configuration of thin client server applications, design, developing & maintaining databases for data collection, configuring process historians and using reporting tools to present process data to operations & management, tuning control loops, providing control system startup services, troubleshooting existing control systems and providing control system qualifications., • Solid understanding of object-oriented software development & delivery methodologies, • Expertise with the design, implementation, maintenance and troubleshooting of virtual server-based control system architectures, and understanding of control system network topology, i.e. Ethernet, Ethernet/IP, ControlNet, DeviceNet, etc., • Knowledge of process instrumentation specification, installation & troubleshooting, and control panel design, check-out, commissioning & troubleshooting, • Hands-on experience rapidly troubleshooting and solving equipment & instrument-related issues during start-up and commissioning and perform complex system testing, • Experience working at customer sites supporting the installation & commissioning of equipment and systems., • PLC Programming with Rockwell Studio5000, RSLogix5000, • Ability to program in RLL, SFC and ST, • Plant Pax module definition is required, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off.

Job DescriptionControls Systems Engineer / Automation Engineer Compensation: $48-$53 per hour What we offer: • Comprehensive medical, dental, and vision coverage, • Company-paid life insurance and disability benefits, • 401(k) company matching, • Paid time off, holidays, paid parental leave, • Pet insurance options, • Mid Shift 10 pm-8 am/ work 4 days per weekAs a Controls Systems Engineer (Automation Engineer), you'll provide expert-level support for automated material handling equipment (MHE) in a high-volume fulfillment environment. Focus on troubleshooting, programming, and optimizing controls systems to maximize reliability, uptime, and performance. Key Responsibilities: • Troubleshoot and modify PLC/PC programs (Allen-Bradley ControlLogix/CompactLogix, RSLogix 5000) for conveyors, sortation, scanners, cameras, print-and-apply, and SCADA systems., • Serve as first-level escalation for on-site and remote controls support, including after-hours emergencies., • Inspect systems, ensure compliance with design specs, codes, and safety regulations., • Oversee contractor work, manage scopes, scheduling, and inspections for upgrades and maintenance., • Engineer reliability improvements from concept to implementation., • Monitor industrial networks (Ethernet, ControlNet, DeviceNet, etc.), servo drives, VFDs, and electrical systems., • Analyze metrics, resolve performance issues, and partner with site teams on failures and process enhancements., • Communicate technical details, timelines, and impacts clearly with leadership, operations, and maintenance., • Build strong relationships with the client and operations teams.Requirements:, • Authorized to work in the U.S. without visa sponsorship., • Bachelor's degree preferred (or equivalent experience/education); 2-5 years relevant controls/automation experience., • 2+ years with PLC programming, robotics components/controls, and SCADA systems., • Experience in at least two full engineering design cycles (spec, selection, programming)., • Strong problem-solving; physical ability to lift 50+ lbs, climb, stoop, etc., • Effective communication for complex technical and stakeholder interactions.Preferred:, • 2+ years apprenticeship or controls troubleshooting/programming., • Experience with diverse conveyors/sortation and robotic maintenance., • Advanced Microsoft Office skills; strong organizational and math abilities.We invest in your growth through on-the-job learning, coaching, and trainingpositioning you for advancement after just six months of success. Apply Today.

Job Description About CP Engineers With over 40 years of industry leadership, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our diverse portfolio spans private, municipal, county, and regional clients—many of whom have partnered with us for decades. Join a fast-growing team dedicated to technical excellence, client satisfaction, and professional growth. Remote work flexibility, competitive compensation and benefits, and a supportive culture have helped CP earn Best Places to Work in NJ awards for three years straight and have driven strong employee retention. Position Overview: CP Engineers is seeking a highly skilled Senior Electrical Engineer to provide technical leadership and mentorship within our electrical engineering team. This role is responsible for developing project scopes, preparing budget estimates, and overseeing electrical design work to ensure the delivery of high quality, accurate, and consistent engineering outputs across the organization. The Senior Electrical Engineer will review, sign, and seal electrical drawings and will also contribute hands on design support as required. Project work may include electrical and control systems for commercial and industrial buildings, water and wastewater pump stations, treatment facilities, and various municipal infrastructure projects. Technical & Design Responsibilities: • Lead electrical engineering design for power distribution, lighting, energy, communications, fire alarm, and control systems across commercial, industrial, municipal, and infrastructure projects., • Prepare and seal engineering drawings, specifications, load calculations, fault current analyses, and arc‑flash studies in accordance with state PE requirements., • Oversee electrical system modeling using industry-standard software (e.g., SKM, ETAP, EasyPower, or equivalent)., • Review and approve design documents produced by EITs, junior engineers, and CAD/BIM staff., • Ensure all plans comply with IBC, NEC, IEEE standards, NFPA codes, local building codes, and utility service requirements., • Assist with P&ID development, • Develop process control schematics, • Must have experience working with HVAC equipment, generators and ATS, switchgears, transformers, and fire alarm systems, • SCADA and PLC development and programming a plus, • Panel design experience a plus, • Serve as the electrical discipline lead on multi‑disciplinary project teams, coordinating closely with mechanical, structural, civil, and water resources groups., • Develop complete plan sets, technical specifications, and bid/construction documents., • Support construction-phase services: respond to RFIs, review submittals, conduct field inspections, issue punch lists, and prepare site visit reports., • Maintain compliance with firm-wide QA/QC procedures., • Review design deliverables for technical accuracy, constructability, and regulatory compliance., • Verify that designs meet safety, reliability, maintainability, and operational requirements., • Meet with clients to define project scope, requirements, and technical expectations., • Provide technical guidance, recommendations, and solutions during planning and project execution., • Support proposal writing, project budgeting, and electrical scope development., • Provide technical mentorship to junior electrical engineers, EITs, and designers., • Support staff development through training on codes, design standards, and best practices., • Oversee workload distribution, task assignments, and schedule adherence for electrical discipline tasks. Compensation: $115,000-$145,000 Requirements • Degree in Electrical Engineering or equivalent from an accredited university., • Maintain active Professional Engineer (PE) license in NJ (or ability to obtain via reciprocity)., • Minimum 7-10 years of electrical engineering experience, with a track record of leading, mentoring, or supervising other engineers., • Represent the firm at industry events, technical conferences, or professional association meetings as needed, • Excellent ability to review and critique designs and provide constructive guidance., • Strong verbal and written communication skills, high attention to detail, and the ability to work collaboratively in a team environment., • Understanding of construction processes and field coordination, with the ability to support field engineers when necessary., • A valid driver’s license and dependable transportation., • Flexible Work Options: Hybrid/remote work arrangements, • Work/Life Balance: Flexible hours, 20 days paid time off, • Financial Security: 401(k) with 4% company match, • Professional Growth: Tuition reimbursement, professional license and association fee coverage, • Comprehensive Health: Medical, dental, and vision insurance, • Supportive Culture: Commitment to employee well-being and career development

Job Description I&C SUPERVISOR Client is looking to hire a highly motivated and dedicated professional to join them as an Instrumentation and Controls/ Electrical Supervisor. Responsible for supervising, directing and coordinating the daily work for Instrumentation/Controls (I&C) technicians in the inspection, repair and rebuilding of mechanical, electrical or instrumentation and controls and their associated structures. Job Description · Perform System Condition Assessments to identify and document system or component deficiencies. Generate and drive corrective actions. · Use plant and industry standard software and analysis tools to initiate performance and availability improvement plans. · Participate in project planning and construction (scope review, design basis requirements, walk-downs, code and procedure compliance, acceptance testing, etc.). · Planning and support of major component overhauls and system outages. · Root cause analysis of forced outages and component failures. · Interface with and track activities of equipment and service providers, both inside and outside the Company. · Documenting and driving correction of unplanned design basis changes. · Generate or review acceptance test plans, and oversee or observe testing. · Review and maintain design basis documentation. · Generate detailed reports and presentations to inform and guide Company capital planning and all levels of management. · Provide engineering support to Station management. · Represent the Organization or Company on committees working on various issues. · Establish and maintain effective lines of communication among various internal and external organizations. · Other duties as assigned. Requirements · 5 years of applicable technical supervisory, or engineering work experience including projects, planning, and administration. · A thorough understanding of plant control system design, construction, operations, maintenance, testing or analysis in the utility industry, oil & gas industry or marine propulsion is required. · Experience with DCS, PLC, BMS, low voltage switchgear, breakers and power cables (up to 480V), UPS, MCC’s. · A working knowledge of equipment sizing and analysis calculations, life cycle management, protection schemes, relay settings, and PLC programming is required. · Either the possession of or ability to obtain an in-depth knowledge of Industry codes, standards, procedures and specifications is required. · Strong leadership skills including experience in direct supervision, and the ability to positively manage and motivate others is required. · Experience supervising a unionized workforce is a plus. · Bachelor’s Degree in Engineering or similar discipline is preferred. Industry Utilities · Oil & Energy · Electrical & Electronic Manufacturing Mi Minimum Education and Experience Requirements · Bachelor’s Degree in engineering (desired) · 5+ years’ experience in an industrial maintenance role at a large process industry (refinery, power plant, military/merchant marine) with 4 years of supervising experience being required. · Experience supervising a unionized workforce is a plus.

Job DescriptionMadison Approach Staffing Inc. Lead Tool and Mold MakerInjection MoldingSalary: $85,000 – $110,000 | Westchester County, NYSalary commensurate with experience. We value strong machining fundamentals and are willing to invest in training the right candidate.Are you a skilled machinist looking to take your career to the next level? Join a well-established electronics manufacturer in lower Westchester County as our Lead Tool and Mold Maker and shape the future of our injection molding division!About the RoleWe’re seeking an experienced professional to lead our tool and mold making efforts. This is a hands-on role where you’ll design, build, and maintain the tools and molds that drive our injection molding production. You’ll also serve as the go-to technical resource for the team, mentoring others and collaborating across departments to optimize our processes.This position offers significant opportunities for long-term stability, growth, and advancement in a dynamic manufacturing environment.What You’ll Do • Design and produce high-quality tools and molds for injection molding machines, • Set up and operate manual machining equipment including mills and lathes, • Program and operate CNC equipment as needed, • Interpret mechanical drawings, schematics, and blueprints to fabricate tooling, • Perform precision inspections and quality control throughout the production process, • Lead and mentor team members in tool and mold making techniques, • Collaborate with cross-functional teams to optimize production processes, • Maintain a clean, safe work area and report safety hazards, • Contribute to continuous improvement initiativesRequired Qualifications, • High school diploma or equivalent GED, • Minimum 5 years of manual milling and turning experience, • Proven ability to interpret mechanical drawings, blueprints, and schematics, • Strong understanding of tolerances and tolerance stacking, • Experience setting up and operating conventional machine tools, • Excellent problem-solving skills and ability to work independently, • Conversational English proficiencyPreferred Qualifications, • 5–10 years of tool and mold making experience (thin-wall, thick-wall, single cavity, and multiple cavity), • Familiarity with injection molding machine operation (we’re willing to provide training for the right candidate), • Understanding of injection molding principles, including polymer behavior, residence time, deformation, and thermal expansion, • Experience with CNC machine programming and operation, • Proficiency with CAD software (e.g., SolidWorks), • Experience with precision grinding equipment, • Familiarity with cold header machines, hydraulic presses, or PLC operation, • Quality inspection experience, including in-process and final inspections using precision measurement tools, • Spanish or other multilingual skillsWhy Join Us?, • Competitive salary range: $85,000 – $110,000, • Opportunity to lead and innovate in a critical manufacturing role, • Stable work environment with a well-established company serving the aerospace and military electronics industry, • Clear path for career advancement, • Comprehensive training and development programs — we invest in growing your skillsIf you’re passionate about precision manufacturing and ready to take on a leadership role where your machining expertise will be valued and developed, we want to hear from you.To apply, please submit your resume to Madison Approach Staffing Inc.

Job Description Electrical & Controls Engineer II ???? Ramsey, NJ (Onsite) ???? Salary Range: $92,603 - $143,535 Build the machines behind precision manufacturing. At Medical Manufacturing Technologies (MMT), we design and manufacture highly specialized automation equipment used by leading manufacturers around the world. Our Guidewires & Abrasives division in Ramsey, NJ develops advanced precision machinery used to produce components for industries including medical device, aerospace, automotive, and other high-performance manufacturing sectors. We’re looking for an Electrical & Controls Engineer II who enjoys solving complex engineering challenges and bringing automated systems to life. This role combines electrical engineering and controls engineering, giving you the opportunity to design electrical systems, develop PLC logic, and support advanced automation equipment from concept through commissioning. What You’ll Do Controls Engineering • Develop and modify PLC control logic for automated manufacturing equipment, • Design and configure HMI interfaces for machine operation and diagnostics, • Integrate and tune servo motion control systems, • Design electrical systems, including schematics, panel layouts, and wiring diagrams, • Select automation components including PLCs, drives, motors, sensors, and safety systems, • Maintain electrical documentation including schematics, BOMs, and I/O lists, • Bachelor’s degree in Electrical Engineering, Controls Engineering, Automation Engineering, or related field, • 3–6 years of experience in electrical, controls, or automation engineering, • Experience with PLC programming and industrial automation systems, • Experience designing electrical systems for automated equipment At MMT, engineers work on custom automation systems used by global manufacturers across multiple industries. Our Ramsey engineering team develops precision machinery that supports both medical device production and high-performance manufacturing applications beyond healthcare. You’ll work alongside experienced engineers and see your designs move from concept to fully functioning machine systems. If you're passionate about automation, machine design, and solving complex engineering challenges, we’d love to hear from you. Apply today to join the MMT engineering team.

Job Description Company introduction: Compass Pathways plc (Nasdaq: CMPS) is a biotechnology company dedicated to accelerating patient access to evidence-based innovation in mental health. The Company is headquartered in London, UK, with offices in New York City in the US. We focus on developing novel treatments that have the potential to improve the lives of those who are suffering with mental health conditions and who are not helped by current treatments. We are pioneering a new paradigm for treating mental health conditions focused on rapid and durable responses through the development of our investigational COMP360 synthetic psilocybin treatment, potentially a first in class treatment. COMP360 has Breakthrough Therapy designation from the US Food and Drug Administration (FDA) and has received Innovative Licensing and Access Pathway (ILAP) designation in the UK for treatment-resistant depression (TRD) due to the pressing unmet need in this area. We are currently in phase 3 for TRD, have completed phase 2 studies for both post-traumatic stress disorder (PTSD) and anorexia nervosa and are planning a further late-stage study in PTSD. We envision a world where mental health means not just the absence of illness but the ability to thrive. - Compass Pathways. Job overview: The Senior Statistical Programmer will contribute expert programming skills to deliver accurate, regulatory-compliant clinical data outputs for Compass Pathways development programs. The role requires strong technical proficiency, collaboration across teams, and adaptability to support complex clinical trial requirements. Location: Hybrid in our NYC Office or remote in the East Coast. Reports to: Associate Director, Statistics and Data Management. Duration: 9-month contract. Roles and Responsibilities (Include but are not limited to): • Leading and coordinating the programming activities within agreed timelines, • Managing the reporting of studies internally and externally, • Programming outputs as stated in the analysis plan, • Working closely with study team members, mainly with the study statistician, • Reviewing of the Statistical Analysis Plan (SAP) and shells, • Create and review SDTM and ADaM study specifications, • Ensure programs, datasets, outputs are appropriate for regulatory submission, • Perform simulations and data modelling, • Perform Interim analyses, • Extensive years experience in statistical programming, • CDISC expertise, • Proficient in programming including performing statistical analyses and creating macros in SAS, preferably R, • Programming/reporting expertise across all phases of clinical development (efficacy/safety/PK), including ISS/ISE reporting, • Experience in performing quality control (QC) checks, • Extensive knowledge in regulatory submission process, • Good understanding of ICH guidelines and regulations such as 21 CFR Part 11, • Experience supporting NDA submissions e.g., FDA, EMA, MHRA and addressing regulatory questions, • Ability to solve challenging problems and provide recommendations to mitigate risk, • Good communication skills - both written and verbal Reasonable accommodation We are committed to building a workplace where everyone's wellbeing matters. If you need reasonable accommodation during the interview process to be at your best, please let our recruiting team know. UK applicants We are proud of our commitment to diversity and equality (pursuant to the Equality Act 2010). We do not discriminate based upon race, religion or belief, colour, nationality, ethnic or national origin, gender, pregnancy or maternity, marital or civil partner status, sexual orientation, gender reassignment, age or disability. US applicants Compass Pathways is proud to be an equal opportunity employer. All employment decisions are based on business needs, job requirements, and individual qualifications, without regard to race, religion, color, national origin, sex (including pregnancy, childbirth, and related medical conditions), ethnicity, age, disability, sexual orientation, gender identity, gender expression, military service, genetic information, familial or marital status, or any other status, category, or characteristic protected by applicable law. Sponsorship: Unfortunately, we cannot sponsor employment visas and can only accept applications if you have employment rights in the country to which you are applying. Data Privacy: All data is confidential and protected by all legal and data privacy requirements, please see our recruitment Privacy Notice to learn more about how we process personal data.

Job DescriptionApplication Engineer Application Engineer - Industrial Automation Position Overview We are seeking an Application Engineer to design, develop, deploy, and support industrial automation applications that integrate PLCs, SCADA/HMI systems, databases, and both software and hardware components. The role focuses on building reliable control and monitoring solutions using Rockwell and AVEVA platforms, developing .NET/WPF applications and thinclient interfaces, and ensuring robust data flow between edge controllers and enterprise information systems. Key Responsibilities • Design and develop PLC programs and HMI/SCADA applications (Rockwell, AVEVA) to meet process and control requirements., • Create, maintain, and optimize database schemas and SQL queries for historian, MES and reporting systems., • Develop desktop and thinclient software using .NET Framework, C#, Visual Studio and WPF for operator interfaces, diagnostics, and reporting., • Integrate hardware components (PLCs, RTUs, I/O modules) and networked devices; configure communication protocols (EtherNet/IP, Modbus, OPC UA, etc.)., • Collaborate with process engineers, control engineers and stakeholders to gather requirements, produce technical specifications, and deliver testable designs., • Perform system testing, validation, FAT/SAT support and onsite commissioning and troubleshooting to ensure reliable operation., • Diagnose and resolve software, database and hardware issues across production systems and provide timely support and maintenance., • Write clear technical documentation, including design documents, test plans, SOPs and user manuals; provide training to operators and maintenance teams., • Contribute to continuous improvement efforts, including performance tuning, cybersecurity best practices and standardization of application libraries and templates.Qualifications, • Bachelors degree in Electrical Engineering, Computer Engineering, Computer Science, Information Systems or a related field (or equivalent experience)., • 3+ years of handson experience in industrial automation, control systems or application engineering with PLC and SCADA projects., • Proven experience programming Rockwell PLCs (Studio 5000/RSLogix) and developing AVEVA (Wonderware/AVEVA System Platform) or equivalent SCADA/HMI applications., • Strong SQL and database experience (designing schemas, writing optimized queries, integrating historians/MES)., • Proficient in .NET Framework, C#, Visual Studio and Windows Presentation Foundation (WPF) for building operator interfaces and applications., • Experience creating or deploying thinclient solutions and familiarity with industrial networking and protocols (EtherNet/IP, Modbus, OPC)., • Handson experience with hardware integration, I/O wiring concepts, and commissioning industrial control systems., • Excellent problemsolving skills, attention to detail, and the ability to work effectively with crossfunctional teams and customers., • Strong written and verbal communication skills; ability to produce clear technical documentation and deliver training. • Medical, Dental, Vision, • 401(k) Matching, • PTO & Holidays, • & much more!, • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 03/31/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Field Service Engineer SGM Magnetics - Lifting Division Position Summary The Field Service Engineer is responsible for hands-on commissioning, inspecting, troubleshooting, upgrading, and supporting SGM lifting magnet systems installed on overhead and outdoor cranes. This role requires frequent travel to customer facilities, primarily within heavy industrial and steel mill environments, and close coordination with the Engineering and After-Sales Departments in Italy. The position demands strong electrical and controls expertise, the ability to work independently in autonomous field conditions, and the professionalism required to represent SGM directly to customers. Key Responsibilities • Travel up to 60% of the time to customer facilities across the United States and Canada to:, • Commission new lifting magnet systems, • Perform inspections and preventative maintenance, • Execute system retrofits and upgrades, • Diagnose and resolve electrical, mechanical, and control-related issues, • Commission, test, and inspect high-voltage and low-voltage electrical systems installed on overhead cranes and outdoor cranes., • Troubleshoot and modify PLC-based magnet control systems, including:, • Hardware and software diagnostics, • Do program updates and ladder logic verification, • Understand and troubleshoot complete magnetic lifting devices, including:, • PLC and electromechanical controllers, • Industrial communication networks (Ethernet, DeviceNet, Profibus, Profinet), • AC/DC drives, • Battery backup systems, • HMI systems and wireless control network components, • Perform programming and troubleshooting using platforms such as:, • RSLogix 5000, • Studio 5000, • FactoryTalk View, • TIA Portal, • Other industrial control software tools, • Deliver customer training on system operation, safety procedures, troubleshooting, and best practices., • Interpret electrical schematics, wiring diagrams, and technical documentation to support commissioning and service activities., • Generate detailed service, commissioning, and inspection reports, including:, • Electrical measurements and troubleshooting, • Root cause analysis, • Corrective actions, • Photographic documentation, • Technical recommendations, • Maintain organized documentation of manuals, reports, drawings, and project-related files., • Coordinate technical clarifications and troubleshooting efforts with the Engineering Department in Italy., • Ensure strict compliance with safety standards, including work in steel mill environments, use of aerial lifts, and adherence to site-specific safety procedures. Work Environment and Physical Requirements • Comfortable working at heights and driving aerial lifts, • Stand and/or walk during shifts lasting up to 10 hours, • Work flexible schedules including weekends, nights, and holidays as required, • Operate in environments with varying noise levels, • Lift up to 50 pounds, • Frequently push, pull, squat, bend, reach, and climb stairs when applicable, • Work in heavy industrial and steel mill environments Required Qualifications • Bachelor's Degree in Mechatronics, • Willingness to relocate to the United States, • Strong knowledge of electrical systems (high and low voltage), • Knowledge working with PLC and PC-based control systems, • Knowledge in industrial communication protocols (Ethernet/IP, DeviceNet, Profibus, Profinet), • Knowledge working with HMI systems and/or other control network components, • Ability to read and interpret electrical drawings and technical documentation, • Strong verbal and written communication skills, • Excellent customer service and interpersonal skills, • Ability to work independently in an autonomous environment, • Willingness to travel up to 60% Compensation and Benefits • Starting Salary: $55,000 USD per year, • 6-Month Performance Review: Increase to $60,000 USD per year, • Housing: SGM will provide housing for two months during apartment search, • Benefits: United Healthcare (Medical, Dental, Vision, Life AD & D) paid by company, • SGM 401(k) Profit Sharing Plan, • Vacation and Paid Holidays, • TN Visa: SGM will assist and cover fees for TN Visa processing, • Relocation: SGM will cover flight to the U.S. and shipping of personal belongings (excluding vehicle and furniture) Company DescriptionSGM has developed a position of pioneer and leader on industrial lifting magnets and has extended its magnetic separation expertise to other in-house separation technologies that are inductive based sensor separators, X-ray separators, color sorters, gravimetric separation and processes. The SGM business model is based on providing technological expertise and to being close to its customers through a network of SGM Magnetics corporations located in Italy, Germany, UK, USA, China and India as well as a few long standing agents with extensive experience in the SGM products and technologies.SGM has developed a position of pioneer and leader on industrial lifting magnets and has extended its magnetic separation expertise to other in-house separation technologies that are inductive based sensor separators, X-ray separators, color sorters, gravimetric separation and processes. The SGM business model is based on providing technological expertise and to being close to its customers through a network of SGM Magnetics corporations located in Italy, Germany, UK, USA, China and India as well as a few long standing agents with extensive experience in the SGM products and technologies.

Job Description Sr Mechanical Controls Engineer - Remote Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have previous experience with the design, construction, integration, and commissioning of Controls and Building Automation Systems (BAS systems) as it pertains to Mechanical / HVAC equipment design in a data center environment. The candidate shall have the expertise to lead the design of new systems and make upgrades to existing automation systems for HVAC and critical cooling systems in the mission-critical environment. The candidate may need to assist in complete startup, commissioning, and validation procedures of these systems. The candidate will need to collaborate with the Electrical and Mechanical Engineering teams, for design sequences, powering of equipment, etc. Responsibilities: • Execute and lead automation design teams of complex scope, and coordinate activities with other disciplines as needed, • Mentor mechanical engineers and assist with training on controls design and development., • Design and implement front end platforms for HVAC controls., • Develop and improve configuration, programming, networking, and diagnostic standards, • Engineer and Implement programming, • Lead creation of modification of programming logic to meet sequence of operations / SOO / Methods of Procedures / MOPs, • Design control, monitoring and systems integration of HVAC / mechanical equipment / systems, • Maintain and deploy updated versions of applications for existing control systems with minimal supervision, autonomous in day-to-day work with being given high level instruction on projects or assignments, • Work with leading edge automation systems from large scale controls vendors;, • Lead development design and continuous improvement of configuration, programming, networking, and diagnostic standards;, • Lead design of controls for centralized chilled water plans condenser water plants, etc., • Review engineered shop drawings and submittals - sequence of operations, installation drawings and point lists, • Participate in building automation focused design reviews, • Assist in the design, configuration, programming, and diagnostics / troubleshooting of BAS networks, • Understand IT / OT interface requirements including routers, switches and network addressing, • Assess, recommend, and implement industry best practices into new and existing Critical Environment Programs, • Develop process documentation and training materials, • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs, Controls vendors, GC's and commissioning agents on project progress, • BA / BS in Engineering or relevant degree a Huge Plus, • Licensed PE / EIT / Certifications a Plus, • Data Center Engineering experience with Automation and Controls Experience, • Experience integrating PLC / ALC with complex data center / mission critical facilities, • 5 -10 + years with BMS / BCM / BAS Systems (Building monitoring systems / building control systems / Building Automation Systems, • Previous experience working on Controls Products from companies such as: Johnson Controls / JCI; Siemens; Automated Logic; Honeywell; GE Control Systems; Schneider Electric, • Ability to read and audit one-lines / blueprints / CAD drawings and controls diagrams, • PLC / ALC Programming Experience, • Experience with Controls systems design as it relates to: Critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Experience working with common BAS protocols BACnet IP, BACnet MSTP, Modbus RTU, Modbus TCP, etc., • Skilled at reviewing design drawings and equipment submittals, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, delegator and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Superior analytical, planning and problem resolution skills, • Must be able to provide necessary pro-active recommendations to clients, • Knowledge of general computer hardware & software applications After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Robotics engineering role focused on FANUC programming and system delivery This Jobot Job is hosted by: Robert Donohue Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $80,000 - $115,000 per year A bit about us: We are an automation and robotics integrator supporting manufacturing operations with custom robotic solutions. Our work focuses on designing, programming, installing, and supporting industrial robot systems that improve production efficiency and reliability. Projects are hands-on and varied, with engineers involved from programming through commissioning and on-site support. This role supports multiple customer environments and is project-based rather than repetitive, with several new programming projects each year. Why join us? • Salary range: $84,000 – $115,000 (based on experience), • 401(k), • Medical and dental (individual and family), • Two weeks of vacation, • Profit sharing, • Retention bonus Job Details This position offers a mix of robot programming, installation, and system troubleshooting, with exposure to new projects throughout the year. Engineers in this role work directly with robot systems, electrical schematics, and I/O, rather than being limited to a single production line or site. The role includes competitive compensation, benefits, and bonus opportunities, along with the chance to work on FANUC-based automation projects across different applications and industries. Travel is limited and planned, typically averaging 25–30%. Primary Responsibilities • Program FANUC robots using HandlingTool, • Develop and support vision applications using FANUC iRVision, • Troubleshoot robot and PLC I/O issues, • Read and interpret electrical schematics, • Support system installation and commissioning, • 70% robot programming, • 20% installation and commissioning, • 4–5+ years of FANUC robot programming, • Experience with FANUC HandlingTool, • Vision programming experience (FANUC iRVision), • Ability to troubleshoot robot and PLC I/O, • FANUC RoboGuide, • Allen-Bradley PLCs and HMIs, • FANUC PickTool Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Leading industrial manufacturer seeking skilled Controls Service Technician (some travel required) This Jobot Job is hosted by: Gabriel Ozuna Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $67,000 - $100,000 per year A bit about us: For over 50 years, we have been a leading supplier of industrial machinery to manufacturers around the world. No manufacturer can offer the same customizable manufacturing equipment across such a diverse assortment of industries, applications, and structures. Why join us? • We are a leader in our industry, • We offer long term career stability, • Opportunities for continued learning, development & advancement, • Excellent pay, • Great benefits, • Positive company culture, • Ability to make an immediate impact Job Details Job Overview: You will collaborate closely with our engineering and production teams, serving as the subject matter expert for our control’s platform. In this role, you will support our service technicians in the installation, troubleshooting, maintenance, and retrofitting of PLC-based control systems utilized in hydraulic and servo-electric presses. Key Responsibilities: • Control System Troubleshooting & Repair: Diagnose and repair PLC-based press control systems, hydraulic motion control circuits, and servo systems., • Installation & Commissioning: Install, configure, and commission control systems for hydraulic and servo electric presses, ensuring proper integration of PLCs and peripherals, • Retrofits & Upgrades: Assist in modernizing hydraulic press controls, upgrading outdated PLCs, HMIs, motion controllers, and hydraulic servo systems for improved performance and automation., • Field Service & Customer Support: Provide on-site and remote troubleshooting for hydraulic and servo electric press controls, minimizing downtime, and ensuring customer satisfaction., • Programming & Debugging: Develop, modify, and troubleshoot PLC logic, HMI screens, motion control programs, and press automation sequences., • Preventive Maintenance & Optimization: Conduct control system inspections and hydraulic system tuning to enhance system performance and reliability., • Documentation & Reporting: Maintain service reports, control schematics, wiring diagrams, and software backups for customer and internal records., • Training & Collaboration: Work closely with engineering, production, and service teams to provide training and guidance on press control systems. Preferred Skills: • Bachelor’s degree in a technical field, most commonly Electrical or Mechanical Engineering, • 5-7 years’ experience in a manufacturing environment, • 7-10 years industry experience without a bachelor’s degree, • Self-starter who is adaptable to work independently and within a team environment, • Excellent communication skills and the ability to work in an interactive group environment are essential. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description HANDS ON ELECTRICAL TECHNICIAN. CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES/ PLC PROGRAMMING IS A PLUS. MUST HAVE ELECTRICAL HANDS ON EXPERIENCE. MUST BE CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES General Description: Develop and maintain facilities electrical infrastructure and equipment. Able to work safely and efficiently with high voltage equipment. Responsible for troubleshooting electrical problems throughout the plant. Supply power from Breaker Panel to equipment. Perform computer program modifications to existing PLC programs. Working knowledge of hydraulics helpful. Reports to: Maintenance Eng. Both English and Spanish speaking applicants will be considered. Responsibilities: • Maintain the electrical in the building and facility equipment., • Read and understand electrical schematics and blueprints, • Troubleshoot and wiring equipment, • Supervisor the Maintenance team Previous Experience: • Experience in A/C 120/208/470 Volts // EMT tube bend and rigid pipe, • Preferred Experience: Wiring electrical enclosures as per schematic given, • Preferred Experience: Computer programing of Allen Bradley PLC controllers Educational Qualifications: • Required: High School diploma, • Preferred: Electrical Technology or Engineering Degree, • Preferred: Electrical Certifications Company training will include • Company’s Quality Management System, • ISO 9001:2015 awareness Other Skills: • An ability to work well under pressure, • Teamwork and problem-solving skills, • Good verbal and written communication skills, • Efficiency and organization, • Able to speak Spanish helpful

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash