Trabajos quality assurance inspector en Houston, TexasCrear alertas

At Houston Methodist, the Lead Medical Laboratory Technician position is responsible for serving as the lead person for the assigned section within Laboratory Services and in this capacity performs lead job duties and/or regularly leads projects or performs specialized responsibilities as a regular part of normal job responsibilities. This position serves as the liaison between management, staff and physicians for routine matters, resolving questions and issues. This position serves to support staff in ensuring the delivery of laboratory results in an effective and cost efficient manner, ensuring adherence to standards of practice for optimal patient safety, quality outcomes, and customer service. Duties may be varied and may include many of the following: organize work schedules, create work assignments, review timecards for accuracy, conduct quality assurance audits of staff performance, develop and implement quality improvement activities, train and mentor staff, provide feedback on staff performance and developmental needs, collect/analyze/report on data, prepare reports on performance and metrics, and other responsibilities of a similar nature and level. This position performs Medical Laboratory Technician/Specialist functions, such as performing both routine and complex analyses and ensuring that specimens are accessioned and processed expeditiously in order to deliver quality laboratory results in an effective and cost efficient manner. FLSA STATUS Non-exempt QUALIFICATIONS EDUCATION • Graduate of education program approved by the credentialing body for the required credential(s) indicated below EXPERIENCE • Three years of experience in a clinical laboratory as a Medical Laboratory Technician LICENSES AND CERTIFICATIONS Required • Must have one of the following: •MLT – Medical Laboratory Technician (ASCP) •CLA – Certified Laboratory Assistant (ASCP) •MLT – Medical Laboratory Technician (AMT) SKILLS AND ABILITIES • Demonstrates the skills and competencies necessary to safely perform the assigned job, determined through on-going skills, competency assessments, and performance evaluations, • Sufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or security, • Ability to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principles, • Exhibits strong interpersonal, teamwork and leadership skills with all levels of the healthcare team and assures delivery of excellent customer service to all patients, visitors, physicians and co-workers, • Adapts to multiple ongoing priorities including organizing heavy workflow with minimal supervision, • Demonstrates critical thinking skills, • Strong attention to detail and ability to achieve and maintain accuracy, • Ability to work independently and execute above average technical skills, • Demonstrates sound judgment and discretion to recognize problems ranging from simple to complex, identify causes and take corrective action, • Strong training, leadership, and mentoring skills, • Able to research information for new platforms and/or emergent technologies, • Possesses basic computer knowledge; operates multiple computer systems to include, Hospital/Laboratory Information Systems and Office software to maintain patient and testing records and other related documents, • Ability to recognize changes that are critical to patient care ESSENTIAL FUNCTIONS PEOPLE ESSENTIAL FUNCTIONS • Promotes a positive work environment and leads the team to be dynamic and a focused work unit that actively helps one another to achieve optimal department results. Collaborates with all members of the patient care team by actively communicating and reporting pertinent patient care information and data in a comprehensive manner. Role models to team members effective communication skills, assisting in their development of such skills., • Effectively implements protocols and objectives with team members to result in optimization of staff performance, teamwork, patient safety, and customer service. Provides feedback to management on team member performance and conduct. Develops skills of team members and continually assists with improving skills, performance and outcomes. Interviews applicants and provides input into hiring of new staff., • Participates in laboratory and organization wide initiatives. Represents Laboratory Services in committees as directed. SERVICE ESSENTIAL FUNCTIONS • Coordinates the workflow, processes, staff assignments, and services provided for assigned laboratory section, adjusting as needed, to result in optimum patient care, throughput and patient experiences. Ensures turnaround time expectations as defined by management are met by the section team., • Serves as liaison between team members, management and physicians, resolving routine matters for the shift and section., • Performs qualitative and quantitative tests and examination using various analyzers and/or manual methods. QUALITY/SAFETY ESSENTIAL FUNCTIONS • Performs the six elements of competency for test systems used to generate patient test results in all areas assigned to work., • Recognizes, investigates and correctly resolves test discrepancies. When problems arise, takes appropriate action to investigate and address and notifies management for follow-up., • Develops plan, leads implementation, and performs data analysis of validations. Coordinates instrument maintenance and repairs. Assists with policy review and submission., • Independently handles resolution of complex problems and issues for section. Serves as escalation support for less experienced staff., • Compiles and reviews monthly quality control data, to include actions for variances identified, and provides proper documentation. Oversees section compliance by reviewing and responding to College of American Pathologists (CAP) Accreditation Checklists questions/findings. Completes online CAP Inspector Training. Investigates and responds to reports on patient safety matters. FINANCE ESSENTIAL FUNCTIONS • Self-motivated to independently manage time effectively and prioritize daily tasks. Provides leadership to staff on efficient utilization of time according to budgetary guidelines. Accurately reviews and edits team member’s timecards for management approval., • Uses resources efficiently; does not waste supplies. Actively participates in inventory management. GROWTH/INNOVATION ESSENTIAL FUNCTIONS • Generates and communicates new ideas and suggestions that will improve quality or service., • Seeks opportunities to expand learning beyond baseline competencies for self and others with a focus on continual development. Gains and utilizes knowledge of new technologies that are emerging for laboratory. SUPPLEMENTAL REQUIREMENTS WORK ATTIRE • Uniform: No, • Scrubs: Yes, • Business professional: Yes, • Other (department approved): No ON-CALL* *Note that employees may be required to be on-call during emergencies (ie. Disaster, Severe Weather Events, etc) regardless of selection below. • On Call* Yes TRAVEL** Travel specifications may vary by department • May require travel within the Houston Metropolitan area Yes, • May require travel outside Houston Metropolitan area Yes QUALIFICATIONS EDUCATION • Graduate of education program approved by the credentialing body for the required credential(s) indicated below EXPERIENCE • Three years of experience in a clinical laboratory as a Medical Laboratory Technician LICENSES AND CERTIFICATIONS Required • Must have one of the following: • MLT – Medical Laboratory Technician (ASCP) • CLA – Certified Laboratory Assistant (ASCP) • MLT – Medical Laboratory Technician (AMT) Company Profile: Houston Methodist Hospital is recognized by U.S. News & World Report as the No. 1 hospital in Texas and one of America’s “Best Hospitals.” As a full-service, acute-care hospital located in the Texas Medical Center and the flagship hospital of Houston Methodist, it has evolved into one of the nation’s largest nonprofit teaching hospitals and a leader in innovative medical research with a comprehensive residency program. Two of Houston Methodist’s primary academic affiliates are among the nation’s leading health care organizations: Weill Cornell Medicine and New York-Presbyterian Hospital. Houston Methodist also has affiliations with Texas A&M University and the University of Houston. Houston Methodist Hospital offers unparalleled care for thousands of patients from around the world. Houston Methodist is an Equal Opportunity Employer.

Yulista Solutions LLC Regular PRIMARY FUNCTION: The Avionics Technician performs avionics maintenance and troubleshooting on aircraft. (Back shop environments as required) ESSENTIAL FUNCTIONS • Use NASA's automated maintenance data system (NAMIS) to maintain equipment records, and document maintenance actions for all avionics and aircraft electrical repairs to NASA assigned aircraft., • Responsible for the maintenance, testing, inspection, repair and integration of aircraft electrical, electronic, computer systems, and research test equipment and payloads in NASA assigned research aircraft platforms., • Inspect, test, and operate avionic and electrical test equipment to ensure serviceability, proper operation and ensure test equipment calibration schedules are up to date., • Must be familiar with Engineering Work orders (EWO's) and be able to complete required instructions in a timely and accurate manner., • Remove, disassemble, repair, clean, treat for corrosion, assemble, and reinstall avionics and aircraft electrical components and accessories., • Update, program and maintain navigational and flight management system databases on assigned aircraft., • Disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations., • Practice good housekeeping, tool control, Foreign Object Damage (FOD) prevention in accordance with company and NASA policies and procedures., • Inspect and maintain aircraft batteries and test equipment., • Perform scheduled and un-scheduled aircraft maintenance inspections and repairs as required., • Perform aircraft ground support duties, including towing, marshalling and jacking aircraft., • Perform maintenance on aircraft, including avionics, mechanical systems, and/or ground support equipment., • Repair, inspect and maintain structural, mechanical and electrical elements of the aircraft., • Knowledgeable in the use of, and be able to train others in the use of a wide variety of diagnostics devices, computers, hand and mechanical tools., • Provide oversight and have the ability to direct and train others in the completion of aircraft related maintenance tasks., • May include Designated System Inspector (DSI) duties., • Troubleshoot systems as required to meet customer needs., • Document maintenance as per Quality Assurance (QA) and established regulatory requirements., • Maintain control of tools. Report missing, lost, found, or unattended tools to the supervisor. Inventory and inspect tools on a regular basis and replace worn or broken tools., • Comply with safety rules and regulations while performing day to day maintenance. Promptly report all accidents, injuries, safety violations, and/or unsafe practices or procedures to supervisor., • Electrical and electronic malfunction troubleshooting skills required., • Systems knowledge should include, aircraft radar, communications, navigation, flight control (autopilot), Flight Management, and flight display systems., • Must possess in-depth knowledge of advanced electronic principles and circuit analysis along with the ability to interpret schematic diagrams, engineering drawings and charts of assigned systems., • Required to trace signal flow and understand interrelationships of circuits., • Possess demonstrable soldering, cable, crimp and harness (CCH) fabrication skills., • The Avionics Technician may be required to perform other related duties to meet the ongoing needs of the organization. KNOWLEDGE, SKILLS, & ABILITIES: • Beginner to intermediate computer skills specifically using Microsoft Office Suite. Ability to learn additional computer skills or software programs. Working knowledge of advanced software applications is preferred., • Ability to enter data accurately into databases., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write routine reports and correspondence., • Interpersonal skills are necessary to work effectively and cooperatively with all levels of management and staff. Will also routinely interact with other crew members., • Must possess effective oral and technical written communication skills to clearly communicate information to others., • Ability to use general office equipment such as fax, phone, copier, scanner, printers, etc., • Ability to follow a process., • Strong professional customer service skills, including active listening, prompt service and follow-up., • Strong decision analysis and problem solving skills. Ability to draw conclusions and justify decisions. Must be able to communicate issues to management., • Ability to learn and understand corporate policies and procedures and how they relate to Yulista Tactical Services, LLC goals., • Ability to perform basic mathematical computations., • High degree of self-motivation and the ability to work independently., • Ability to multi-task. QUALIFICATIONS: • High School Diploma or equivalent required., • Prefer Level 1 Certification in ESD Protection (Electrostatic), • Requires a Federal Aviation Administration (FAA) Airplane and Powerplant certification, • May require a FCC GROL Certification, • 5+ years of aircraft avionics experience with fixed/rotor wing commercial, Government or DOD aircraft required. (Prefer Gulfstream), • Experience supporting a NASA/DoD contract., • Must have the ability to obtain and maintain a Government Security Clearance. PREFERENCE STATEMENT Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g). EEO STATEMENT Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits. REASONABLE ACCOMMODATION It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. The statements contained in this job description are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This job description is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.

Job Description Quality Control (QC) Manager – Manufacturing / Fabrication (Sawing, Swaging, Bucking) SUMMARY The QC Manager is responsible for leading all quality assurance and quality control functions within a precision manufacturing environment specializing in sawing, swaging, and bucking processes. This role ensures that all materials, machining processes, and finished components meet customer specifications, industry standards, and internal quality requirements. The QC Manager will drive continuous improvement, maintain compliance standards, and ensure operational excellence across all shop activities. RESPONSIBILITIES • Develop, implement, and maintain the Quality Management System (QMS) in alignment with ISO 9001 and company standards, • Oversee quality control processes across cutting (sawing), material deformation (swaging), and end-finishing (bucking) operations, • Ensure all products meet customer specifications, engineering drawings, tolerances, and material requirements, • Lead inspections of raw materials, in-process components, and finished products to ensure dimensional accuracy and surface integrity, • Establish and enforce inspection procedures specific to metal cutting, forming, and finishing processes, • Conduct root cause analysis and implement corrective and preventive actions (CAPA) for quality issues and non-conformances, • Manage internal and external audits, ensuring compliance with ISO standards and customer requirements, • Maintain accurate documentation including inspection reports, material certifications, and non-conformance reports, • Ensure proper calibration and maintenance of measurement and inspection equipment (calipers, micrometers, gauges, etc.), • Track and report key quality metrics such as defect rates, rework, and production yield, • Partner with production, engineering, and operations teams to improve process efficiency and product quality, • Train and mentor QC personnel and shop employees on quality standards, inspection techniques, and best practices, • Collaborate with customers and third-party inspectors during audits, inspections, and project reviews, • Evaluate vendor and material quality to ensure consistency in incoming productsQUALIFICATIONS, • 5+ years of experience in quality control or quality management within manufacturing, machining, or metal fabrication environments, • Strong knowledge of ISO 9001 standards and QMS implementation/maintenance, • Experience working with metal processing operations such as cutting, forming, or finishing (sawing, swaging, bucking preferred), • Proficient in reading and interpreting technical drawings, tolerances, and specifications, • Hands-on experience with inspection tools and measurement techniques, • Strong leadership, communication, and problem-solving skills, • Experience leading audits, inspections, and continuous improvement initiatives, • Certification such as Certified Quality Manager (CQM) or Certified Welding Inspector (CWI) is a plusPERFORMANCE METRICS (KPIs), • ISO 9001 audit results and compliance, • Reduction in defects, rework, and non-conformance reports (NCRs), • On-time inspection and quality reporting, • Continuous improvement in process quality and production efficiencyIDEAL CANDIDATE PROFILE, • Detail-oriented and process-driven with a strong focus on precision manufacturing, • Comfortable working in a fast-paced shop environment, • Proactive leader who can identify issues and implement solutions quickly, • Strong collaborator who can bridge quality, production, and customer expectations

Job Description Position Overview Our client is seeking an experienced Electrical QA/QC Specialist to support a confidential public works infrastructure upgrade in the United States. This role will be heavily site-based and focused on the verification, validation, and inspection of medium and high voltage electrical systems, including switchgear and protection controls. This position will support a leading OEM-led program and play a key role in ensuring all electrical installations meet project specifications, safety standards, and quality requirements. Key Responsibilities • Perform on-site QA/QC inspections of electrical installations to ensure compliance with project specifications and engineering drawings, • Verify installation and commissioning of medium and high voltage systems, including switchgear and protection equipment, • Conduct field validation of equipment, wiring, and control systems, • Review and interpret technical documents, drawings, and specifications to confirm accuracy of installed work, • Identify non-conformances and support resolution in coordination with engineering and construction teams, • Document inspection findings and maintain accurate QA/QC records, • Support adherence to safety, regulatory, and quality standards across all electrical scopes, • Coordinate with project stakeholders to ensure timely execution of quality activities Required Qualifications • Demonstrated experience in electrical QA/QC, inspection, or field engineering roles, • Strong background in medium and high voltage systems, • Experience working with switchgear (SF6/FS6 or equivalent) and electrical protection systems, • Ability to interpret engineering drawings, specifications, and standards, • Hands-on field experience in construction, infrastructure, or industrial environments, • Strong understanding of electrical safety practices and compliance requirements Preferred Qualifications • Experience supporting OEM-led projects, • Background in power distribution, substations, or large-scale infrastructure upgrades, • Familiarity with commissioning and startup activities, • Prior experience working on public works or regulated projects

Job Description Night Shift The QC Inspector will work closely with departmental managers, production staff, and suppliers you will take responsibility to ensure quality, aiming to minimize the costs of reworking or waste and maximize customer satisfaction with products. DUTIES: · Monitor and report Quality Assurance and Quality Control aspects of required work scope package(s). · Control and ensure the accuracy of all project documentation · Control and ensure the accuracy of all required component parts · Completion of various inspection and quality reports · Mechanical and inspection report completion to the required standard. · Ensure the traceability of all parts required and documentation trail are in place. · Record and document traceable information which will be required to certify the manufacturing process, to the highest standards. · Identify engineering faults and process inputs throughout key stages of a project’s development. From order acknowledgement to final inspection · Recommend adjustments to the process What we look for: · EDUCATION: MINIMUM HIGH SCHOOL DIPLOMA OR GED · CNC machine background (must) · Experience in reading and interpreting engineering drawings · Use of measuring tools for critical dimensions Company DescriptionAbout us: Express works with job seekers to help find the right job for their skills and experience. We have a variety of jobs available, including full-time, part-time, and temporary positions. As one of the leading staffing companies in Houston, we’re ready to help you take the next step in your career. Express Employment Professionals is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. We are committed to the principle of equal employment opportunity for all people and to hire and promote individuals solely based on their qualifications for the job. In compliance with applicable federal, Texas and local law, employment decisions are based on business needs, job requirements, and an individual’s qualifications regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability, genetic information or protected veteran status. We do not tolerate discriminaAbout us:\r\n\r\nExpress works with job seekers to help find the right job for their skills and experience. We have a variety of jobs available, including full-time, part-time, and temporary positions. As one of the leading staffing companies in Houston, we’re ready to help you take the next step in your career.\r\n\r\nExpress Employment Professionals is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. We are committed to the principle of equal employment opportunity for all people and to hire and promote individuals solely based on their qualifications for the job.\r\n\r\nIn compliance with applicable federal, Texas and local law, employment decisions are based on business needs, job requirements, and an individual’s qualifications regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability, genetic information or protected veteran status. We do not tolerate discrimina

Job Description Quality Inspector (CMM) Pay Rate: $19.00 - $21.00 per hour Schedule: Monday - Friday, 7:00 AM - 3:30 PM Position Summary The Quality Inspector is responsible for performing inspections on products and materials to ensure compliance with customer specifications, engineering drawings, and quality standards. This position supports quality assurance initiatives, maintains accurate inspection documentation, and assists in maintaining compliance with established quality systems within a laboratory and manufacturing environment. Qualifications • Strong verbal communication and interpersonal skills., • Ability to work effectively in a fast-paced, team-oriented environment., • Highly organized with strong attention to detail., • Experience working in manufacturing, quality, inspection, or calibration environments preferred., • Commitment to safety, quality, and continuous improvement., • Experience with Coordinate Measuring Machines (CMM) is preferred., • Quality certifications such as ASQ-CCT are preferred but not required. Required Skills & Experience • High School Diploma or GED required., • Minimum of 2 years of experience in quality inspection, calibration, manufacturing, or a related technical environment., • Working knowledge of precision measuring instruments, gauges, and inspection equipment., • Ability to read and interpret engineering drawings and specifications., • Basic understanding of GD&T principles preferred., • Good mathematical aptitude and attention to detail., • Ability to follow written procedures and maintain accurate records. Preferred Qualifications • Experience operating Coordinate Measuring Machines (CMM)., • Previous experience in a calibration or metrology environment., • Knowledge of ISO 17025 quality standards., • ASQ Certified Quality Technician (CQT), Certified Calibration Technician (CCT), or similar quality certification. Key Responsibilities • Perform inspections on company and customer-owned products to verify compliance with specifications and quality requirements., • Follow internal quality procedures and support compliance with ISO 17025 standards., • Utilize precision measuring tools, gauges, and inspection equipment to evaluate product quality., • Read and interpret engineering drawings, specifications, and inspection instructions., • Record inspection results and maintain accurate quality documentation., • Process associated paperwork, including inspection reports, nonconformance reports, and rework documentation., • Assist with dimensional inspections using Coordinate Measuring Machines (CMM) when applicable., • Identify and communicate quality concerns to appropriate personnel., • Follow established procedures, work instructions, and quality standards., • Perform other duties as assigned. Physical Requirements • Ability to stand, walk, and sit for extended periods., • Frequent use of hands for handling tools, instruments, and inspection equipment., • Ability to reach, bend, and perform repetitive motions as needed., • Occasionally lift and/or move up to 20 pounds., • Ability to maintain focus and attention to detail throughout the workday. Work Environment • Laboratory and manufacturing environment., • Moderate noise levels., • Exposure to production and inspection areas as required.Company DescriptionProSource Staffing is a professional staffing agency dedicated to connecting qualified candidates with companies in need of reliable talent. We specialize in providing temporary, temp-to-hire, and direct-hire staffing solutions across a variety of industries, including industrial, office, and skilled trades. Our team focuses on matching candidates’ skills and career goals with the right opportunities, while supporting both clients and employees throughout the hiring process. We pride ourselves on professionalism, personalized service, and building long-term relationships with the people and companies we serve.ProSource Staffing is a professional staffing agency dedicated to connecting qualified candidates with companies in need of reliable talent. We specialize in providing temporary, temp-to-hire, and direct-hire staffing solutions across a variety of industries, including industrial, office, and skilled trades. Our team focuses on matching candidates’ skills and career goals with the right opportunities, while supporting both clients and employees throughout the hiring process. We pride ourselves on professionalism, personalized service, and building long-term relationships with the people and companies we serve.

Job DescriptionWe’re hiring a QA Inspector for our client! We’re seeking a detail-oriented and dependable professional who can step in quickly and support quality assurance operations. DESCRIPTION OF YOUR DREAM JOB: Job Title: QA Inspector Location: Houston, TX (77008) Pay: $20/hr (DOE) Type: Temp-to-hire Schedule: M–F, 7:00 AM – 4:30 PMResponsibilities: Performs inspections, testing, and calibrations; prepares and maintains quality assurance documentation. Requirements: High school diploma or GED; 3–4 years of QA experience (including fastener testing/inspection); ISO knowledge preferredSkills: Ability to read and interpret manuals and procedures; basic math skills; strong attention to detail; ability to write reports

Job DescriptionProject Inspector Location: Poolesville, MD Employment Type: Full-Time About the Role We are seeking an experienced Project Inspector to support construction projects throughout the Washington/Baltimore metropolitan area. This role is ideal for a construction professional with a strong background in quality assurance, quality control, construction management, and inspection services. The successful candidate will serve as the owner's representative in the field, ensuring projects are completed according to contract requirements, specifications, safety standards, and quality expectations. Key Responsibilities • Conduct construction inspections to verify compliance with contract plans, specifications, approved submittals, shop drawings, and applicable codes., • Prepare and maintain daily inspection reports and project documentation., • Identify, document, and track deficient work until corrective actions are completed., • Coordinate and communicate effectively with owners, contractors, architects, engineers, and project stakeholders., • Review and verify as-built documentation for accuracy and completeness., • Attend project meetings and assist with meeting documentation., • Support preparation of weekly and monthly project status reports., • Monitor all phases of construction and advise contractor representatives on corrective actions needed to maintain compliance., • Reject non-compliant work when authorized by the project owner., • Assist with contractor submittal reviews, including schedules, materials, and construction methods., • Participate in final inspections, develop punch lists, and verify completion of corrective work., • Provide professional customer service to project stakeholders and the public., • Support constructability reviews, cost estimating efforts, change order evaluations, and schedule reviews., • Maintain required certifications and participate in professional development activities.What We're Looking ForRequired Experience, • Minimum of 7 years of combined education and/or experience in construction quality management, inspection, or construction administration., • Experience with general construction and the installation of mechanical, electrical, plumbing (MEP), and related building systems., • Demonstrated expertise in quality assurance, quality control, construction management, engineering, or related disciplines., • Progressive career growth within the construction industry.Preferred Experience, • Experience supporting healthcare, laboratory, higher education, K-12, federal government, or local government construction projects., • Familiarity with both new construction and renovation projects.Education, • High School Diploma or GED with significant related construction experience., • Associate's degree in a related field preferred., • Bachelor's degree in Engineering, Architecture, Construction Management, or a related discipline is highly desirable.Certifications, • OSHA 30-Hour Certification required or ability to obtain within 3 months of hire., • Preferred certifications include:, • Construction Quality Management (CQM), • Certified Construction Manager (CCM), • Journeyman or Master-level trade certification/licenseSkills & Qualifications, • Strong understanding of construction methods, materials, codes, and industry standards., • Ability to read and interpret construction drawings, specifications, and contract documents., • Knowledge of quality assurance and quality control practices., • Strong written and verbal communication skills., • Proficiency with Microsoft Office Suite and web-based project management tools., • Ability to work independently while managing multiple project responsibilities., • Comfortable working outdoors, climbing ladders, navigating active construction sites, and working in varying weather conditions., • Ability to apply mathematical calculations and engineering principles to verify construction compliance.Compensation Salary Range: $85,000 – $105,000 annually Additional Requirements • Successful completion of a background check prior to employment., • Must be authorized to work in the United States without sponsorship.

Job Description Thompson Engineering is a leader in delivering high-quality infrastructure and construction projects across the South. With a strong commitment to safety, quality, and client satisfaction, we are currently seeking a dedicated and experienced Civil QA/QC Inspector to join our growing team. The Civil QA/QC Inspector will oversee the quality assurance and quality control aspects of civil construction work including earthworks, concrete, asphalt, utilities, drainage, and structural components. The ideal candidate will be responsible for ensuring that all construction activities comply with applicable codes, standards, project specifications, and quality plans. The Ideal candidate must be willing to travel to support project needs. Essential Functions of the Position • Conduct QA/QC inspections for all civil construction activities, including but not limited to earthwork, foundation, concrete placement, utilities, roadways, and structural components. • Review and interpret project drawings, specifications, and quality requirements., • Prepare and maintain daily inspection reports, test results, non-conformance reports (NCRs), and corrective action documentation. • Monitor construction work to ensure compliance with approved inspection and test plans (ITPs). • Coordinate with contractors, site engineers, consultants, and quality managers to address any quality-related issues. • Verify materials and workmanship meet the project's approved submittals and standards., • Attend quality and coordination meetings as needed., • Ensure that all inspection and testing records are properly documented and archived., • Support continuous improvement by identifying recurring quality issues and suggesting practical solutions. Minimum Requirements • High School Diploma or GED required; Associate's or Bachelor's degree in Civil Engineering, Construction Management, or related field preferred. • Minimum of [3-5] years of experience in civil construction QA/QC, preferably in infrastructure or large-scale projects. • In-depth knowledge of industry standards and codes (ASTM, ACI, AASHTO, etc.)., • Experience reviewing and implementing Inspection and Test Plans (ITPs) and Quality Control Plans (QCPs). • Familiarity with construction materials and laboratory/field testing procedures., • Strong organizational and communication skills., • Proficiency with Microsoft Office Suite and QA/QC reporting tools., • Valid driver's license and the ability to travel to project sites. Preferred Certifications (Not Required, but a Plus): • ACI Concrete Field Testing Technician - Grade I, • NICET Certification in Civil/Construction Inspection, • OSHA 10 or 30 Certification, • ISO 9001 Quality Management Systems knowledge, • QMS/QA-related training or certifications Physical Requirements • Must be willing to work flexible schedules and overtime as needed by the department needs., • Ability to lift and carry a minimum of 40 lbs., • Drive a company vehicle in a safe manner, • Walk, stoop, bend, and climb up and down stairs and ladders, • Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel., • Work in high grounds and high open buildings, • Work outside for extended periods in the heat and cold, • Ability to wear appropriate PPE for hazardous materials, • Ability to read and write in EnglishAbout Thompson Engineering Thompson Engineering was established in 1953 in Mobile, Alabama. Since then, the company has grown to include multiple offices in states throughout the Southeast. Thompson Engineering is a subsidiary of Thompson Holdings, Inc. Our sister companies are Watermark Design Group, an architectural and interior design firm, and Thompson Consulting Services, a disaster recovery consulting firm. As a group, the three firms provide a broad range of architectural and engineering services. Thompson is an employee-owned firm with more than 300 personnel in multiple disciplines. Our staff has a vested interest in providing safe, quality driven, successful projects that are completed on time and within budget. Our business relies heavily on our performance and the repeat satisfaction of our customers. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Description Quality Control Inspector Pay:$16.48/hr Schedule: Full-Time, Monday - Friday 7 am - 3:30 pm Position Overview We are seeking an experienced Quality Control Inspector to join our team. The Quality Control Inspector is responsible for inspecting products, identifying defects, verifying specifications, and ensuring quality standards are met throughout the production process. This position plays a critical role in maintaining product quality, customer satisfaction, and operational excellence. The ideal candidate will have previous experience in quality control, quality assurance, manufacturing inspection, warehouse inspection, or production environments and possess strong attention to detail. Responsibilities • Perform visual and functional inspections of products and materials, • Inspect incoming, in-process, and finished goods for quality compliance, • Identify defects, discrepancies, and non-conforming products, • Document inspection results and maintain accurate quality records, • Utilize measuring tools and inspection equipment to verify specifications, • Communicate quality concerns to supervisors and production personnel, • Assist with root cause investigations and corrective actions, • Ensure products meet company quality standards before shipment, • Follow all safety procedures, work instructions, and quality guidelines, • Maintain a clean and organized work area Qualifications • High school diploma or GED required, • Previous experience as a Quality Control Inspector, Quality Inspector, QC Technician, Quality Assurance Inspector, Manufacturing Inspector, or similar role preferred, • Strong attention to detail and ability to identify defects, • Experience working in a manufacturing, production, assembly, or warehouse environment, • Ability to read and follow work instructions and quality standards, • Basic computer skills for documentation and reporting, • Strong communication and problem-solving skills, • Ability to work independently and as part of a team Preferred Qualifications • Experience with quality inspection procedures and documentation, • Familiarity with measuring tools such as calipers, tape measures, gauges, or other inspection equipment, • Experience inspecting finished products in a manufacturing or distribution environment, • Knowledge of continuous improvement and quality processes Physical Requirements • Ability to stand, walk, bend, and lift throughout the shift, • Ability to lift up to 50 pounds, • Frequent use of hands for inspection and handling products, • Ability to visually identify defects and quality issues. Why Apply? • Full-time opportunity, • Stable work environment, • Growth opportunities, • Competitive pay, • Team-oriented culture Apply today to be considered for this Quality Control Inspector opportunity. Company DescriptionAt LINK Staffing, we help job seekers like you find employment faster and more easily. Our team of staffing experts take the guesswork out of job hunting and help you find the right opportunities with less effort. Our unique commitment to enhanced employee benefits, payroll flexibility, and career development make us the perfect partner in finding opportunities throughout Texas.At LINK Staffing, we help job seekers like you find employment faster and more easily. Our team of staffing experts take the guesswork out of job hunting and help you find the right opportunities with less effort.\r\n\r\nOur unique commitment to enhanced employee benefits, payroll flexibility, and career development make us the perfect partner in finding opportunities throughout Texas.

Job Description Seeking a Medical Records Coordinator for the Heights area of Houston - Contract to Hire, Monday - Friday 8-5. Responsibilities: • Compliance & Auditing: Reviews clinical documentation, patient charts, and treatment plans to ensure compliance with federal, state, and accreditation standards (e.g., CARF, Medicaid/PASSEs)., • Quality Improvement: Identifies trends in clinical incidents, conducts root cause analyses, and recommends improvements to policies and procedures., • Documentation Management: Tracks and audits data in Electronic Health Records (EHR) to provide accurate reports on documentation deficiencies., • Incident Investigation: Manages incident reporting, including allegations of abuse, neglect, or exploitation, coordinating with appropriate regulatory bodies like the Office of Inspector General (OIG)., • Assist in clinical summaries based on all available documentation and physician’s findings., • Work one-on-one with physicians ensuring accurate completion of case assignments., • Verify final scribed reports meet the quality standards required. Required Skills/Qualities: • Communicates effectively and professionally., • Meet or exceed productivity and accuracy requirements., • Prior experience with medical record review, medical claims, quality assurance, peer reviews, or case management is required. A degree in nursing, medical doctor, or similar field of study may be used in place of this prior experience requirementCompany DescriptionA trusted commercial concrete contractor known for delivering high-quality projects through experienced leadership, strong project controls, and efficient execution. With a focus on safety, craftsmanship, and precision, we’re growing and seeking motivated professionals committed to excellence.A trusted commercial concrete contractor known for delivering high-quality projects through experienced leadership, strong project controls, and efficient execution. With a focus on safety, craftsmanship, and precision, we’re growing and seeking motivated professionals committed to excellence.

Job Description About the Role: The New Vehicle Inspection role is critical in ensuring that newly manufactured or delivered vehicles meet all safety, quality, and regulatory standards before they reach customers. This position involves conducting thorough inspections of vehicles to identify any defects, damages, or deviations from manufacturer specifications. The inspector plays a key role in maintaining the brand’s reputation by preventing substandard vehicles from entering the market. This role requires a keen eye for detail, strong technical knowledge of vehicle systems, and the ability to document findings accurately. Ultimately, the goal is to guarantee that every vehicle leaving the facility is safe, reliable, and compliant with all applicable standards. Minimum Qualifications: • High school diploma or equivalent., • Experience in vehicle inspection, automotive maintenance, or a related field., • Strong attention to detail and organizational skills. Preferred Qualifications: • Certification in automotive inspection or quality control., • Experience working with new vehicle delivery or manufacturing environments., • Proficiency with digital inspection tools and software., • Strong communication skills for effective collaboration with cross-functional teams. Responsibilities: • Perform comprehensive inspections of new vehicles, including mechanical, electrical, and cosmetic components, to ensure compliance with quality standards., • Identify and document any defects, damages, or inconsistencies found during the inspection process., • Collaborate with manufacturing and quality assurance teams to communicate inspection results and facilitate corrective actions., • Maintain detailed records of inspections and generate reports to support quality control and regulatory compliance., • Stay updated on industry standards, safety regulations, and manufacturer specifications to ensure inspections are thorough and current. Skills: The required skills enable the inspector to accurately assess vehicle condition by applying technical knowledge and attention to detail during each inspection. Proficiency in reading technical manuals and checklists ensures that inspections are thorough and consistent with manufacturer and regulatory standards. Preferred skills such as certification and familiarity with digital tools enhance the efficiency and accuracy of inspections, allowing for better documentation and reporting. Communication skills are essential for effectively conveying inspection findings and collaborating with manufacturing and quality teams to resolve issues. Together, these skills ensure that the inspector can maintain high-quality standards and contribute to the overall safety and reliability of new vehicles.

Job Description Who We Are: For over 90 years, Heath Consultants Incorporated has been a trusted name in natural gas safety services. We are a family-owned company with deep roots in protecting people, infrastructure, and communities through precision instrumentation and field expertise. At Heath, quality isn't a department — it's a culture. Every product we build carries that commitment. Job Purpose: We're looking for a detail-oriented and proactive Quality Assurance Inspector to join our team. In this role, you'll serve as a critical guardian of product integrity, performing hands-on inspections, driving compliance with engineering specifications, and surfacing risks before they become problems. You'll work cross-functionally with engineering, production, and supply chain teams, ensuring that everything leaving our facility meets the standard our customers expect. If you're someone who finds satisfaction in precision, thrives on accountability, and believes that quality is everyone's responsibility — this is your role. Candidates MUST be local to the Houston, TX area( Near Hobby Airport) for the interview process and work environment. What You'll Do: • Perform random critical parts inspections to verify compliance with engineering specifications and fit, form, and function requirements, • Conduct regular process and QMS audits: identifying gaps, documenting them clearly, and driving issues to resolution, • Complete final inspections of instruments as required before products reach the customer, • Log and report nonconformances for parts, processes, and finished products to the appropriate stakeholders, • Identify supplier-related risk early, document findings thoroughly, and follow through to corrective action, • Proactively escalate risks that may impact production output, product quality, or delivery timelines, • Recommend improvements in quality procedures, component selection, and manufacturing processes, • Champion quality improvement projects and contribute actively to a culture of continuous improvement, • Support cross-functional initiatives and additional quality projects as business needs evolve What You Bring: • Bachelor's degree in Engineering, Quality Management, or a related technical discipline (or equivalent hands-on experience), • 3+ years of experience in a quality-related role, with emphasis on auditing, inspection, or quality systems, • Familiarity with electronic assemblies including wiring harnesses and PCBAs, • Ability to interpret schematics and work instructions in the context of fit, form, and function, • Understanding of test and calibration outputs and their relationship to product compliance, • IPC-610 and IPC-620 certification preferred, • Proficiency in Microsoft Office Suite, ERP systems, and SolidWorks What Sets You Apart: You don't just find problems — you solve them. You notice what others miss, document with precision, and communicate findings without hesitation. Whether you're flagging a supplier risk or presenting audit results to leadership, you bring clarity and follow-through. You're organized, technically sharp, and comfortable working in a fast-paced manufacturing environment. Heath Values: P – Protect people, assets and the public. R – Respect everyone, always. O – Own your job. T – Tell the truth early. E – Execute with discipline. C – Communicate clearly. T – Take pride in quality work. Work Environment & Physical Requirements: • Manufacturing floor setting, • Exposure to vibration, fumes, and airborne particles, • Work near moving mechanical parts, • Occasional exposure to electrical equipment, • Variable noise levels — PPE provided, • Primarily on your feet throughout the shift, • Regular lifting up to 25 lbs; occasional up to 50 lbs, • Frequent use of hands for precision tasks, • Close vision, depth perception, and focus adjustment required Ready to bring your quality expertise to a team that takes craftsmanship seriously? Apply today and help us build products that perform in the field — every time. #LI-EG1 #INDEG

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and skilled CNC Fabricator. The CNC Fabricator produces a variety of sheet metal parts, which meet dimensional requirements. Set up and align parts per shop prints in preparation for CNC operations, and final fabrication assembly. Working either individually, or as part of a small team to produce metal buildings and enclosures. Job Duties: • Consults blueprints, work orders, and/or schematics to safely construct a specified structure; develop additional sketches if needed., • Selects appropriate material for each job based on the desired or necessary strength., • Load and unload raw materials and equipment, set up and calibrate accessories, and program the CNC machine, • Cuts, bends, and shapes sheet metal to required dimensions., • Measures and cuts according to specifications, blueprints, or directions., • Verifies conformance of workpiece to specifications, using square, ruler, and measuring tape., • Perform assigned work such as punching holes for screws or bending., • Sets up and operates fabricating machines, such as brakes, and shears., • Coordinates require shutdowns and startups of equipment., • Develops and maintains records for projects and repairs, • Maintains clean and orderly workspace, • Performs other related duties as assigned, • Notify the lead person or Inspector when the product is ready for inspection, • Maintains a clean and safe work area each day and returns tools to their proper locations, • Perform routine maintenance and cleaning on the CNC machine Requirements • High school diploma or equivalent preferred, • Forklift certification preferred, • Two plus years of CNC experience required, • Two plus years of experience in forklift operating required, • Two plus years of experience in the use basic tools (squares, clamps, fillet gauge, angle grinder, etc.) required, • Two plus years of experience in shear, brake press, turret punch, band saw, grinder, ratchet straps, and other hand tools required, • Two plus years of experience in applicable QAPs (Quality Assurance Procedures) required, • High levels of organizational and time management skills required, • High levels of analytical, observational, and active listening skills required, • High levels of reliability required, • Excellent communication skills, both written and verbal required, • Ability to pass physical, drug, driving, and background check required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to stoop and bend required, • Ability to sit, stand, and walk for four plus hours at a time required, • Ability to read a tape measure and prints required, • Ability to convert decimals to fractions and utilize conversion charts required, • Excellent manual dexterity required, • Alignment with company core values required, • Ability to read tape measure down to 1/32”, • Ability to read decimals/fractions on measurements Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job DescriptionDescription: The Quality Inspector works in conjunction with other QA personnel to support production and test manufactured goods. The Quality Inspector will use basic mechanical inspection tools and gauges to ensure a successful product line. Responsibilities not limited to: 1. Assurance of material criteria establishment • Inspects incoming raw materials and components for conformance verification of traceability to existing inspection plans, customer/VMC drawings, sales and purchase orders, • Initiate and manage the MRB (Material Review Board) process 1. In Process Product Inspection • Inspects the integrity of the product to the order with respect to dimensions, correct components, color, etc., • Randomly samples the ‘in process product’ to ensure specifications and dimensional checks, • Identifies manufactured products that do not meet quality specifications, • Documents inspection results by completing reports and logs; summarizing re-work and waste 1. Final Product Inspection • Ensures final product meets the specific customer order, • Reviews the final sign off on the traveler or work order to release the product to shipping., • Collects quality data for accept and reject rates in all areasRequirements: Knowledge/Skills/Abilities • Basic knowledge of Microsoft Office, Excel and Word, • Working knowledge of calibration of gauges and ability to use calipers, height gauges, thread gauges, etc., • Ability to read and interpret blueprints and apply knowledge to inspection of products, • Knowledge of ANSI Y14.5 symbology Competencies • Strong attention to detail, • Proven verbal and written communication skills, • Self-starter with an independent work approach, • Strong integrity and ethics, • Excellent organizational skills with ability to frequently re- prioritize Minimum Qualifications • High School diploma or GED, • 2-3 years of experience in a mechanical inspection environment, • Experience with ISO 9001 a plus ------------------------------------------------------------------------------------------------------------------------------------------------- At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals, • Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company — APPLY TODAY! ------------------------------------------------------------------------------------------------------------------------------------------ We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Job Description We are seeking a detail-oriented Quality Inspector for a 12-month contract opportunity with potential temp-to-perm conversion in Deer Park, TX 77536, paying $24.00/hour. This role is responsible for inspecting warehouse picking accuracy, verifying part numbers and quantities, reviewing packaging quality, maintaining inspection records, and supporting customer satisfaction through quality assurance activities. The ideal candidate will have 1+ years of warehouse or quality inspection experience, strong attention to detail, good communication skills, and knowledge of manufacturing processes. Experience with SAP and Excel is a plus. Schedule • 7:00 AM – 4:30 PM or 8:00 AM – 5:30 PM, • Overtime may be required based on business needs Job Responsibilities • Inspect warehouse orders for accuracy, including part numbers and quantities, • Document inspection results and maintain accurate quality records, • Report internal and external defects and assist with root cause investigations, • Verify packaging methods meet customer and company requirements, • Collaborate with Warehouse and Quality teams to resolve picking and packing defects, • Support timely delivery of scheduled shipments through final inspections, • Review and gather product documentation, including material test reports (CMTRs) and inspection reports, • Work with documentation teams to ensure customer requirements are met, • Support continuous improvement and lean quality initiatives, • Follow all safety procedures and promote a safe work environment Qualifications • High School Diploma or equivalent, • Minimum of 1 year of related quality inspection or warehouse experience, • Strong attention to detail and accuracy, • Good communication and teamwork skills, • Basic knowledge of dimensional testing and manufacturing processes preferred, • Experience using SAP and Microsoft Excel preferred, • Ability to maintain detailed records and inspection documentation Working Conditions • Climate-controlled workshop environment, • Extended periods of standing, bending, and lifting, • Overtime may be required, • No known safety risks associated with the role, • Work is performed onsite and not at a customer facility Preferred Attributes • Coachable and eager to learn, • Familiarity with SAP systems, • Strong problem-solving and organizational skills RightStone is a strategic partner that works with our clients to place the highest caliber of talent for a wide range of industries and skill sets. For over 23 years RightStone has assisted organizations in attracting, recruiting, and placing qualified candidates quickly for contract, contract to hire, and direct hire opportunities. The right candidates are the most critical aspect of who RightStone is. If you are that candidate, we are interested in speaking with you! RightStone is an equal opportunity employer and prohibits unlawful discrimination based on race, color, creed, gender, religion, marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition, sex, genetic information, sexual orientation, military and veteran status or any other consideration made unlawful by federal, state, or local laws. RightStone is committed to compliance with all applicable laws providing equal employment opportunities. This commitment applies to all persons involved in Company operations and prohibits unlawful discrimination by any employee of the Company, including supervisors, coworkers, independent contractors and other third parties. Company DescriptionRightStone is a strategic partner that works with our clients to place the highest caliber of talent for a wide range of industries and skill sets. For over 23 years RightStone has assisted organizations in attracting, recruiting, and placing qualified candidates quickly for contract, contract to hire, and direct hire opportunities. The right candidates are the most critical aspect of who RightStone is. If you are that candidate, we are interested in speaking with you! RightStone is a multi-divisional staffing company that has provided a People Focused, Client Driven, and Market Aware foundation to the ever-growing hiring ecosystem since 1996. As a member of the CSSI Family of Companies we provide focused Centers of Excellence both in Technical Staffing and National Recruitment Services. RightStone is the right choice. If you are looking for your next work home or to staff your department – WE ARE ON IT! RightStone’s Excellence Centered approach to contract, contract to hire, and direct hire services across the CONUS is backed by industry leading processes. Processes that steer Candidate Engagement and Client Serving to Success. Candidate Engagement Center of Excellence: Powered by skilled recruiters and human resources professionals, RightStone engages candidates and employees at multiple levels. Bringing the benefits of our strategic partnerships along with best in class support to our people means one thing – Our people are the critical aspect of our business! Client Servicing and Delivery Center of Excellence: RightStone’s account professionals and operations teams bring measurable value to our client’s hiring needs. Through controllable workflows, focused and scalable delivery models, and adaptable labor desk coordination we bring a transactional dialog that truly speaks to our clients. Our dedicated focus to our clients brings our most valuable asset to them – Our people!RightStone is a strategic partner that works with our clients to place the highest caliber of talent for a wide range of industries and skill sets. For over 23 years RightStone has assisted organizations in attracting, recruiting, and placing qualified candidates quickly for contract, contract to hire, and direct hire opportunities. The right candidates are the most critical aspect of who RightStone is. If you are that candidate, we are interested in speaking with you!\r\n\r\nRightStone is a multi-divisional staffing company that has provided a People Focused, Client Driven, and Market Aware foundation to the ever-growing hiring ecosystem since 1996. As a member of the CSSI Family of Companies we provide focused Centers of Excellence both in Technical Staffing and National Recruitment Services. RightStone is the right choice. If you are looking for your next work home or to staff your department – WE ARE ON IT!\r\n\r\nRightStone’s Excellence Centered approach to contract, contract to hire, and direct hire services across the CONUS is backed by industry leading processes. Processes that steer Candidate Engagement and Client Serving to Success.\r\n\r\nCandidate Engagement Center of Excellence: Powered by skilled recruiters and human resources professionals, RightStone engages candidates and employees at multiple levels. Bringing the benefits of our strategic partnerships along with best in class support to our people means one thing – Our people are the critical aspect of our business!\r\n\r\nClient Servicing and Delivery Center of Excellence: RightStone’s account professionals and operations teams bring measurable value to our client’s hiring needs. Through controllable workflows, focused and scalable delivery models, and adaptable labor desk coordination we bring a transactional dialog that truly speaks to our clients. Our dedicated focus to our clients brings our most valuable asset to them – Our people!

Job DescriptionSimply Put, A Great Place to Work Benesch is a growing, multi-disciplined planning, engineering, and professional services firm. We enhance infrastructure and communities across the country – creating spaces and providing connections in ways that make a difference. We pride ourselves on being nimble enough to remain responsive to client needs yet large enough to offer exceptional bench strength. As a member of our team, you'll have an opportunity to draw from those resources when you need them and, likewise, contribute your expertise when you have something to share. At Benesch, we are looking for candidates with varied backgrounds and worldviews. We are committed to offering an inclusive work environment where everyone feels valued and respected. Statistics show that women and underrepresented groups are less likely to apply for a position if they don't meet 100% of the qualifications. If this statement resonates with you, don't be so hard on yourself—apply for the job! On-Call Field Inspector - Transportation Construction Engineering Become an on-call Construction Site Inspector with the Benesch team. In this position, you will play a crucial role in supervising construction inspections throughout the United States. The ideal candidate should possess 2+ years of practical experience in field inspections related to Railroad infrastructure projects. Benesch's Railroad Division is made up of highly skilled rail professionals, many of whom are former employees of operating railroads. This firsthand experience working on designing and maintaining active rail systems uniquely equips our team to develop innovative solutions to a wide variety of rail projects. Location This position is field-based, with work conducted from a designated field office and requiring travel to various project sites. Preferred candidates should reside in one of the states where projects are located, including Arkansas, Arizona, California, Idaho, Illinois, Kansas, Nebraska, Nevada, Oklahoma, and Texas, to facilitate site visits. The Impact You Will Have • Daily oversight of contractors' day-to-day work., • Enforce contractor responsibilities and ensure strict compliance with contract specifications., • Accurately measure and validate contractor quantities in alignment with contract terms., • Generate comprehensive daily construction reports to monitor progress and document daily undertakings., • Monitor quality assurance documentation to verify conformity with quality standards., • Maintain daily Field Book entries in line with documentation requisites. This includes recording tasks, workforce, and equipment usage and capturing visual progress updates and any issues encountered., • Track the advancement of construction activities to produce detailed work reports for field orders., • Participate in progress meetings to provide updates when necessary., • Collaborate closely with Resident Project managers to facilitate the resolution of technical challenges.What you will need, • Minimum 2 years of practical experience working as a field inspector on infrastructure projects, • Concrete Structure/Bridge Inspection Experience: A strong plus., • Eager to learn and display a proactive approach to new tasks and acquire additional skills., • Must be capable of collaborating effectively within a team-oriented environment., • Must possess a valid driver's license., • Must be willing and able to travel to various project site locations across the Midwest US region. #LI-MM1 The expected compensation range for this position is displayed in accordance with the Colorado Equal Pay for Equal Work Act. The final agreed-upon compensation is based on numerous factors, including but not limited to individual education, qualifications, prior work experience, and geographic location. The total annual compensation package will consist of a base salary, overtime, and bonuses. Benefits: Our benefits package is designed to take care of our employees. Benesch offers a generous paid time benefits plan that increases throughout your career plus several paid holidays. Our benefits include medical, dental, and vision benefits. We also include company-paid life insurance, short term, and long-term disability plans. Benesch offers a 401K plan and profit-sharing contributions to the 401K plan. From insurance and retirement plan to our wellness programs, we provide employee benefits that meet your wants and needs. Colorado Pay Range $30—$55 USD The expected compensation range for this position is displayed in accordance with the California Equal Pay Act. The final agreed-upon compensation is based on numerous factors, including but not limited to individual education, qualifications, prior work experience, and geographic location. The total annual compensation package will consist of a base salary, overtime, and bonuses. California Pay Transparency $30—$55 USD The expected compensation range for this position is displayed in accordance with the Maryland Pay Transparency Law. The final agreed-upon compensation is based on numerous factors, including but not limited to individual education, qualifications, prior work experience, and geographic location. The total annual compensation package will consist of a base salary, overtime, and bonuses. Benefits Our benefits package is designed to take care of our employees. Benesch offers a generous paid time benefits plan that increases throughout your career, plus several paid holidays. Our benefits include medical, dental, and vision benefits. We also include company-paid life insurance, short term, and long-term disability plans. Benesch offers a 401K plan and profit-sharing contributions to the 401K plan. From insurance and retirement plans to our wellness programs, we provide employee benefits that meet your wants and needs. Maryland Pay Transparency Law$30—$55 USD The expected compensation range for this position is displayed in accordance with the State of Illinois Pay Transparency Act, Illinois Pay Transparency Law. The final agreed-upon compensation is based on numerous factors, including but not limited to individual education, qualifications, prior work experience, and geographic location. The total annual compensation package will consist of a base salary, overtime, and bonuses. Our benefits package is designed to take care of our employees and is compliant with the State of Illinois Paid Leave Act, Illinois Paid Leave Act. Benesch offers a generous paid time benefits plan that increases throughout your career plus several paid holidays. Our benefits include medical, dental, and vision benefits. We also include company-paid life insurance, short term, and long-term disability plans. Benesch offers a 401K plan and profit-sharing contributions to the 401K plan. From insurance and retirement plan to our wellness programs, we provide employee benefits that meet your wants and needs. Illinois Pay Range$30—$55 USDWhy Benesch It's simple. We invest in our people, not just our projects. • Career growth that's real with leadership development, training, and clear paths forward, • Strong financial future with up to 9% retirement contribution for benefit-eligible employees, • Flexibility that works with schedules that support your life, • Time to recharge with generous paid time off and parental leave for benefit-eligible employees, • Support beyond work through mentorship, hands-on experience, and opportunities to make an impact from day one Whether you're starting your career or bringing years of experience, you'll have the support and exposure to grow here. Explore our full benefits here: Click here Equal Opportunity & Accessibility At Benesch, we believe great work starts with great people and that means creating a workplace where everyone has the opportunity to succeed. Benesch is firmly committed to Equal Employment Opportunity (EEO) and prohibits employment discrimination for employees and applicants in all protected groups, including veterans and individuals with disabilities, or other status protected by federal, state, and local laws. Benesch is committed to working with and providing reasonable accommodation to applicants with a physical disability or other impairment. If you are limited in your ability or are unable to access Benesch's Careers website due to a physical disability or other impairment, you may request a reasonable accommodation by emailing TalentAcquisition@benesch.com. This option is only available to those in need of an accommodation due to a disability or other impairment. Please do not use this as an alternative method for general inquiries or status on applications, as you will not receive a response. Reasonable requests will be responded to as soon as possible on a case-by-case basis. If you are based in California, we encourage you to read this important information for California residents linked here. Know your Rights: Workplace Discrimination is Illegal We will be accepting applications on an ongoing basis until a candidate is found. External Recruiters and Staffing Agencies Benesch shall have no obligation to compensate any external recruiter or search firm for candidate submissions made without a valid, current, and fully executed agreement. Submission of candidate information does not establish entitlement to a fee. All recruiting activity must be coordinated and authorized through the Benesch Talent Acquisition team. Please direct all communications to TalentAcquisition@Benesch.com

Job Description Job Description: Field Engineer will be responsible for construction engineering, contract administration, management of inspection staff, management of testing contract and quality control of multiple transportation infrastructure construction projects in accordance with the contract documents. Coordination with the private utilities, HOA's, businesses, property owners, and Fort Bend Staff/Agents will be required throughout the projects. Responsibilities: • Apply diversified knowledge of construction engineering principles and practices and provide recommendations to resolve significant construction engineering problems, • Provide general inspection of construction work to ensure compliance with contract documents, plans, specifications and standards., • Review inspector daily reports in accordance with the project requirements., • Monitor quality control and quality assurance material field testing for concrete, steel, asphalt and soils as applicable., • Perform and/or supervise staff in preparing pay estimates, schedule reviews, RFi responses, submittal reviews, non-conformance reports, etc., • Review contractor requests for additional compensation and time arising from plan revisions, extra work, changes conditions, claims etc., • Draft change orders and other correspondence, • Ensure all project documentation in performed and archived in accordance with owner requirements, • Coordinate the work of sub-consultants., • Lead or attend meetings that facilitate open communication and problem resolution between contractor, client and stakeholders., • Lead project close-out process including final inspections, prepare punch lists, and warranty 1-year inspections., • Assist and contribute to contract procurement activities., • Perform other duties as assigned. Minimum Qualification: • Bachelors degree in a relevant field (Civil Engineering, Construction Management, Construction Engineering, Structural Engineering, etc.), • A minimum of 4 years of progressively responsible experience relevant to this role in transportation infrastructure construction., • Working knowledge of applicable standards, specifications and materials, • Effective oral and written communication skills. Preferred Qualifications: Experience working with Fort Bend, Harris County, TxDOT, HCTRA, City of Houston or similar municipal transportation construction projects. Company DescriptionWe are a Houston-based engineering consulting company established on the cornerstone of transportation. We offer a multidisciplinary blend of planning, engineering and program management services for all types of transportation projects.We are a Houston-based engineering consulting company established on the cornerstone of transportation. We offer a multidisciplinary blend of planning, engineering and program management services for all types of transportation projects.

Job Description Position Summary Thompson Engineering is seeking a motivated and detail-oriented Certified Welding Inspector (CWI) to join our inspection and quality assurance team. This position is responsible for performing welding inspections and ensuring compliance with applicable codes, project specifications, and industry standards across a variety of construction and industrial projects throughout the Southeast. This role requires the ability and willingness to travel to project sites, including multi-state assignments, and work in field environments as needed to support active construction operations. Key Responsibilities • Perform visual welding inspections in accordance with applicable codes and project specifications (AWS, ASME, API, etc.) • Verify compliance with approved Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR) • Confirm welder qualifications and maintain required documentation, • Interpret construction drawings, welding symbols, and technical specifications, • Document inspection findings, non-conformances, and corrective actions, • Coordinate and monitor non-destructive testing (NDT) activities as required, • Prepare daily field reports, inspection summaries, and supporting documentation, • Travel to various job sites, including out-of-town and multi-state assignments, as required, • Follow established safety policies and quality control procedures, • Communicate effectively with project managers, field staff, contractors, and clients Qualifications • Current Certified Welding Inspector (CWI) certification issued by the American Welding Society (AWS), • High school diploma or equivalent required; associate degree in welding technology or related field preferred • Minimum 3 years of welding inspection experience preferred, • Working knowledge of applicable welding codes such as AWS D1.1, API 1104, and ASME Section IX, • Strong understanding of welding processes and inspection techniques, • Proficiency with Microsoft Office applications and digital reporting systems, • Strong written and verbal communication skills, • Valid driver's license with a clean driving record, • Ability and willingness to travel frequently and work extended hours based on project needs Physical and Work Environment Requirements • Ability to work in outdoor and construction site environments, • Ability to stand for extended periods and navigate uneven terrain, • Ability to lift up to 50 pounds and perform field-related tasks, • Willingness to work flexible hours, including overtime and travel assignments, based on project needs

Job DescriptionQuality Control InspectorPay: $18.50 per hour Location: Houston, TX 77423 Schedule: Project-based; current opening 6:00 PM – 6:00 AM; overtime and weekend hours as assigned Start: Immediate openings Job Type: Contract Pay Frequency: Weekly payAbout the RoleShareSTAFF is hiring Quality Control Inspectors for third-party inspection, sortation, and containment assignments at a quality assurance and inspection facility in Houston, Texas. As a Quality Control Inspector on our team, you will perform independent visual inspections of automotive and electric vehicle (EV) components and assemblies, identify defects, document findings, and help ensure that non-conforming items are properly contained before reaching the production line or end customer. This is project-based work supporting major automotive and EV manufacturers in the Houston region, with schedules that adjust to client production needs.What You'll Do • Perform visual inspections of automotive and EV components and assemblies against client specifications, • Identify defects such as scratches, dents, stains, stitching or finish flaws, and missing or damaged parts, • Sort, contain, and segregate non-conforming material per client and industry quality protocols, • Document findings using client inspection forms, tracking systems, and daily reports, • Communicate quality issues to supervisors and on-site quality engineers, • Support rework and repack activities and prepare inspected items for shipment to the production line or end customer, • Maintain a clean, organized, and safe work area in compliance with facility standards, • Follow all client facility safety, PPE, and quality system requirementsWhat You Bring - Required, • At least 6 months of experience in a warehouse, manufacturing, or similar environment, • Strong attention to detail and the ability to spot small visual defects, • Ability to stand for 8–12 hours and lift up to 50 lbs continually throughout a shift, • Willingness to work variable project-based shifts, including nights, weekends, and overtime as needed, • Ability to read, write, and communicate effectively in English for documentation and team coordination (Spanish speakers welcome), • Reliable transportation to the Houston worksite, • Must be able to complete pre-placement requirementsWhat You Bring - Preferred, • Prior experience as a Quality Control Inspector, Quality Inspector, QC Technician, Quality Auditor, or Sortation/Containment Inspector, • Experience inspecting automotive components, EV battery components, seats, interiors, or other manufactured assemblies, • Familiarity with automotive quality standards (IATF 16949, ISO 9001, PPAP, CS1/CS2), • Experience with third-party quality assurance, sorting, or containment work, • Steel-toed boots and willingness to follow a standard warehouse dress code (solid-color shirts, jeans without rips or holes), • Bilingual (English/Spanish) communication skillsWhat We Offer, • Weekly pay - every Friday, • Medical, dental, and vision benefits for eligible employees, • Temp-to-hire opportunities with many of our client partners, • Dedicated recruiter support throughout your assignment, • Referral bonuses - earn extra when you refer a friendAbout ShareSTAFFShareSTAFF has been a trusted staffing partner for businesses across California's Central Valley, the Bay Area, and the Houston region for more than a decade. With offices in Stockton, Tracy, Turlock, Sacramento, and Modesto, we connect hardworking people with rewarding warehouse, manufacturing, and quality assurance opportunities. We're more than a staffing firm - we're here to help you find the right fit, build your skills, and grow your career.How to ApplyReady to put your eye for detail to work? Click "Apply Now" below or contact your nearest ShareSTAFF office to speak with a recruiter today.ShareSTAFF is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Reasonable accommodation may be made to enable individuals with disabilities to perform essential job functions. ShareSTAFF participates in E-Verify; employment eligibility verification will be required at the time of hire. #lico1 #zr

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, data center, environmental, food & beverage, pulp & paper, material handling, oil & gas, pharmaceutical, renewables, metals, and utility markets. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and skilled Metal Fabricator. The Fabricator produces a variety of sheet metal parts, which meet dimensional requirements. Set up and align parts per shop prints in preparation for welding and perform welding operations, and final fabrication assembly. Working either individually, or as part of a small team to produce metal buildings and enclosures. Job Duties: • Consults blueprints, work orders, and/or schematics to safely construct specified structure; develops additional sketches if needed., • Selects appropriate material for each job based on the desired or necessary strength., • MIG welds mild and stainless steel., • Cuts, bends, and shapes sheet metal to required dimensions., • Measures, cuts, and welds pieces together according to specifications, blueprints, or directions., • Hammers, chips, and grinds workpiece to cut, bend, and straighten metal to meet specifications., • Verifies conformance of workpiece to specifications, using square, ruler, and measuring tape., • Connects pieces or secures seams by riveting, rolling, soldering, or using steel screws., • Performs assigned work on assembly such as punching holes for screws or bending gutters., • Sets up and operates fabricating machines, such as brakes, rolls, shears, flame cutters, and drill presses., • Coordinates required shutdowns and startups of equipment with other departments after sheet metal installation., • Develops and maintains records for projects and repairs, • Maintains clean and orderly workspace, • Performs other related duties as assigned, • Notify the lead person or Inspector when the product is ready for inspection, • Maintains a clean and safe work area each day and returns tools to their proper locations Requirements • Two plus years of experience welding in a manufacturing or industrial setting required, • Two plus years of experience in forklift operating required, • Two plus years of experience in the use basic tools (squares, clamps, fillet gauge, angle finder, etc.) required, • Two plus years of experience in shear, brake press, turret punch, CNC laser, ironworker, band saw, welding machine, cutting torch, plasma cutter, grinder, overhead crane, ratchet straps, and other hand tools required, • Two plus years of experience in applicable QAPs (Quality Assurance Procedures) required, • High levels of organizational and time management skills required, • High levels of analytical, observational, and active listening skills required, • High levels of reliability required, • Excellent communication skills, both written and verbal required, • US work authorization without sponsorship required, • Ability to pass physical, drug, driving, and background check required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to stoop and bend required, • Ability to sit, stand, and walk for four plus hours at a time required, • Ability to read a tape measure and prints required, • Ability to convert decimals to fractions and utilize conversion charts required, • Excellent manual dexterity required, • Excellent color vision and eyesight required Preferred Qualifications: • High school diploma or equivalent preferred, • 1G & 3G Welding certification preferred, • Forklift certification preferred Testing Requirements: Welding Test Required Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job DescriptionSalary: We offer competitive pay, comprehensive benefits, company matched 401k, and opportunities to build a rewarding career with Apave America Inc. Position Overview: The API 510/570/653 Inspector will conduct visual examinations of pressure retaining equipment such as tanks, piping, and vessels ensuring their mechanical integrity by performing visual inspections according to established API standards and codes (i.e. 510 for pressure vessels, 570 for piping, and 653 for storage tanks), to identify potential issues, maintaining documented reports of inspection findings, recommend necessary repairs, and certifyingcompliance with industry regulations. Conduct Inspections and Assessments • Inspect pipelines, pressure vessels, storage tanks, and other critical infrastructure for signs of wear, corrosion, cracks, leaks, or other damage., • Perform internal and external inspections based on industry standards like API 510 (pressure vessels), API 570 (piping), or API 653 (storage tanks)., • Ensure compliance with relevant codes and standards (e.g., API, ASME, ASTM, NFPA, and OSHA). Prepare Inspection Reports • Document findings from inspections, including any defects or non-conformities., • Provide detailed reports that include photographic evidence, measurements, and recommendations for corrective actions., • Maintain records for future reference and regulatory compliance. Risk Assessment and Analysis • Identify potential risks and hazards based on inspection findings., • Recommend corrective actions, including repairs, replacements, or modifications to maintain safety and integrity., • Assess the remaining life of equipment and suggest maintenance schedules to prevent failures. Non-Destructive Testing (NDT) • Supervise NDT methods (such as ultrasonic testing, radiographic testing, magnetic particle testing, or dye penetrant testing) to detect subsurface or surface defects., • Interpret NDT results and provide recommendations based on the findings. Regulatory Compliance and Safety • Ensure that inspections and assessments align with all relevant regulatory standards and safety protocols., • Assist with regulatory audits and maintain compliance with industry standards to minimize downtime and potential hazards., • Stay current with changes in regulations and industry practices. Collaboration and Communication • Work with engineers, maintenance teams, and management to develop inspection schedules and action plans., • Provide technical advice and guidance on repair and maintenance strategies., • Communicate with contractors and third-party vendors regarding inspection requirements and results. Monitoring and Continuous Improvement • Track and monitor equipment performance over time and report any changes or declines in condition., • Recommend or implement improvements in inspection processes, techniques, or technologies to enhance efficiency and safety. Certification and Training • Maintain necessary API certifications and participate in ongoing training to stay updated with the latest inspection standards, tools, and technologies., • Ensure that work is done in a manner that complies with both company procedures and industry best practices. Quality Assurance • Ensure that inspections are carried out according to established quality assurance standards and practices., • Verify that the equipment meets the required operational and safety standards before returning to service. Required Skills and Experience: • High School Diploma or equivalent is required., • Minimum of two (2) years' experience working with the 510, 570, and/or 653 certifications required., • Minimum of API 510 and 570 certifications are required., • Additional API 653 certification will be considered an asset., • Certifications in NDT methods (MT/PT/UTT) would be considered an asset., • Valid Drivers License and pre-access drug and alcohol testing required., • Pre-employment background checks will be required. Work Conditions: • Field duties require indoor and outdoor work in diverse industrial environments with varying climate conditions, • Interaction with other crew employees, as well as supervisors, client personnel and a wide range of stakeholders, • Working in a plant and/or shop area around production machinery with extreme noise levels, • Work from various levels of heights and/or confined spaces for long periods of time, • Wear safety equipment as required by the safety department for personal protection (PPE) Physical and Mental Requirements: • Ability to lift, move, and carry objects weighing 75lbs. or greater, • Must be able to walk, sit, stand, bend, reach, and climb, • Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines, • Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping, • Working extended hours and standing for extended periods of time, • Work in indoor and outdoor environments in conditions of extreme heat and/or cold, • Work in and near industrial hazards, • Must be able to walk and climb except when performing non-field duties, • Remain consistently active throughout shift, • Sufficient clarity of speech and hearing and other communication capabilities, with or without reasonable accommodation, which permits the employee to communicate effectively, • Sufficient vision (close vision and distance vision) or other powers of observation, with or without reasonable accommodation, which permits the employee to investigate, • Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties, • Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties and travel to off-site locations, • Must be able to wear safety equipment as required by the safety department for personal protection (PPE), • Ability to maintain focus and multitask effectively, • Exhibit sensible and responsible behavior, • Ability to work autonomously or within a team environment Benefits: • Dental Insurance., • Vision Insurance., • Health Insurance., • Paid Time Off., • 401(K) W/Matching., • Flexible Spending Account., • Health Savings Account. NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification. * Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. * We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.

Job Description Entry-Level Weld Inspector Location: Deer Park, TX Schedule: Monday – Friday | 8:00 AM – 5:00 PM Pay Rate: $20.00 – $25.00 per hour Position Summary We are seeking a motivated and detail-oriented Entry-Level Weld Inspector to join our team in Deer Park, TX. This position is ideal for candidates with welding knowledge, fabrication experience, technical training, or an interest in quality control and inspection within an industrial environment. The Weld Inspector will assist with monitoring welding activities, reviewing weld quality, documenting inspection results, and ensuring compliance with company and customer specifications. Key Responsibilities • Assist in inspecting welds for quality, accuracy, and compliance with project requirements, • Perform visual inspections of welds and fabricated components, • Verify materials, weld procedures, and documentation are properly maintained, • Review drawings, blueprints, and welding specifications, • Document inspection findings and prepare reports, • Assist with quality control audits and corrective actions, • Work closely with welders, supervisors, and project personnel, • Ensure compliance with safety regulations and quality standards, • Support testing and inspection activities as directed Required Qualifications • High school diploma or GED, • Basic knowledge of welding processes such as TIG, MIG, FCAW, or SMAW, • Ability to read and interpret blueprints and technical drawings, • Strong attention to detail and organizational skills, • Basic computer proficiency, including Microsoft Office, • Strong communication and documentation skills, • Ability to work in both office and shop environments Preferred Qualifications • Previous welding, fabrication, quality control, or industrial experience, • Technical school or vocational training related to welding or inspection, • Familiarity with welding symbols and inspection terminology, • AWS Certified Welding Inspector (CWI) trainee status or interest in pursuing certification, • Experience in industrial, refinery, petrochemical, or manufacturing environments Physical Requirements • Ability to stand, walk, bend, and inspect work areas for extended periods, • Ability to work in industrial and fabrication environments, • Ability to lift up to 25 pounds as needed, • Comfortable working indoors and outdoors in varying conditions Why Join Us? • Excellent opportunity to gain hands-on inspection experience, • Career growth potential within quality assurance and welding inspection, • Stable Monday–Friday schedule, • Competitive pay based on experience Equal Employment Opportunity We are an Equal Opportunity Employer and value diversity in our workforce. Company DescriptionProSource Staffing is a professional staffing agency dedicated to connecting qualified candidates with companies in need of reliable talent. We specialize in providing temporary, temp-to-hire, and direct-hire staffing solutions across a variety of industries, including industrial, office, and skilled trades. Our team focuses on matching candidates’ skills and career goals with the right opportunities, while supporting both clients and employees throughout the hiring process. We pride ourselves on professionalism, personalized service, and building long-term relationships with the people and companies we serve.ProSource Staffing is a professional staffing agency dedicated to connecting qualified candidates with companies in need of reliable talent. We specialize in providing temporary, temp-to-hire, and direct-hire staffing solutions across a variety of industries, including industrial, office, and skilled trades. Our team focuses on matching candidates’ skills and career goals with the right opportunities, while supporting both clients and employees throughout the hiring process. We pride ourselves on professionalism, personalized service, and building long-term relationships with the people and companies we serve.

Job Description Role Overview We are seeking a versatile QC Inspector to lead quality assurance for our structural and piping operations. This role requires a technical expert who can operate with high autonomy while maintaining seamless communication with our shop team and external customers. You will be responsible for the full quality lifecycle, from Receiving Inspection to final Hydro Testing, ensuring strict adherence to AWS D1.1 and ASME B31.3. Key Responsibilities • Receiving & Traceability: Inspect incoming raw materials for compliance with POs; verify MTRs and maintain strict heat number traceability throughout fabrication., • Code Ownership: Serve as the subject matter expert for AWS D1.1 (Structural) and ASME B31.3 (Process Piping) standards., • Testing & Documentation: Manage WPQR/WPS records and lead all Hydrostatic Testing procedures, including safety briefings and final documentation., • Independent Oversight: Manage daily inspection schedules and signoffs with minimal supervision to keep production moving., • Collaborative Fabrication: Partner with shop foremen and welders to resolve non-conformance issues constructively and prevent rework., • Customer Liaison: Act as the professional point of contact for third-party inspectors and customer representatives during final inspections and turnover. Required Qualifications • Endorsements: Current AWS D1.1 endorsement is required., • Code Mastery: Proven experience working within ASME B31.3 specifications., • Testing Skills: Direct experience setting up and documenting hydro testing., • Interpersonal Skills: Demonstrated ability to communicate technical requirements clearly to both internal teams and external clients., • Documentation: High proficiency in maintaining digital and physical records (MTRs, NCRs, Weld Logs) and communications., • Digital Literacy: Strong command of the Microsoft Office ecosystem, specifically Excel, Word, and Outlook Physical Requirements & Environment • Active shop environment; ability to stand, climb, and inspect in various positions., • Adaptability to changing project priorities and deadlines.

Job Description JOB DESCRIPTION JOB TITLE: Maintenance Manager REPORTS TO (JOB TITLE): Director of Operations DEPARTMENT: Various POSITION SUMMARY: The Maintenance Manager is responsible for overseeing the maintenance, repair, and regulatory compliance of the company’s fleet to ensure safe, reliable, and cost-effective operations. This role manages maintenance personnel, vendor relationships, preventive maintenance programs, and ensures compliance with all applicable federal, state, and local regulations (including Federal Motor Carrier Safety Administration standards). JOB SPECIFIC RESPONSIBILITIES: • Assumes full management responsibility for the entire maintenance department including maintenance and parts control, compliance, quality assurance and warranty administration of vehicles; recommends and administers policies and procedures., • Selects, trains, motivates and evaluates assigned personnel; provides or coordinates staff training; works with employees to correct deficiencies; implements discipline and termination procedures., • Ensure compliance with DOT and Federal Motor Carrier Safety Administration regulations, including inspections, maintenance records, and out-of-service criteria., • Develop and enforce preventive maintenance (PM) schedules to minimize downtime and extend asset life., • Plans, directs and coordinates, through subordinate level staff, the department's work plan; assigns projects and programmatic areas of responsibility; reviews and evaluates work methods and procedures; meets with key staff to identify and resolve problems., • Maintain accurate documentation for audits, inspections, and compliance reviews., • Directs, monitors and participates in the preparation of a variety of periodic and special reports such as KPI., • Oversees and participates in the development and administration of the department budget; approves the forecast of funds needed for staffing, equipment, materials and supplies; approves expenditures and implements budgetary adjustments as appropriate and necessary., • "Manage relationships with external vendors, parts suppliers, and service providers., • Ensure proper inventory control of parts, tools, and equipment, • Other duties as assigned EXPERIENCE: 7 - 10 years of job-related experience - required. EDUCATION: Minimum Formal Education: Four-year bachelor’s degree or equivalent experience LICENSES and CERTIFICATIONS: Required. • Diesel Mechanic Certification (ASE), • Brake Inspector Certification (FMCSA Regulation 49 CFR), • OSHA 30-Hour Certification

Job Description QUALITY CONTROL INSPECTOR (TEMPORARY) Location: Houston, TX 77049 Pay: $20-$25 DOE Shift: 8am-5pm Start: ASAP Duration: 3 months QUALITY CONTROL INSPECTOR (TEMPORARY) Location: Houston, TX 77049 Pay: $20-$25 DOE Shift: 8am-5pm Start: ASAPDuration: 3 months POSITION SUMMARY: Ensure proper API and customer specifications are met on all documentation during the processes required to release product for shipment. Generate material test reports. Coordinate inspection and testing activities, follow product status. KEY RESPONSIBILITIES: • Doc. Review & Release all SLN's (product) that have met all technical, testing, & inspection requirements, • Build Quality Documentation file (physical and/or electronic) as processing activity reports are received, • Generate material test reports (MTRs), • Entry of Mechanical Testing data from the lab to generate required test reports for each lot, • Maintain records (required quality documents) during API-required 10-year retention period, • Coordinate final visual acceptance of orders, • Miscellaneous office duties EXPERIENCE, SKILLS, AND KNOWLEDGE: • Ability to read, write, and speak English. Spanish fluency, • Computer literate., • Good communication skills., • Proficient with EFD and PIPE software., • Knowledge of the API, ISO, and ASTM specification requirements, • Experience with coupling and threading., • Experience with micrometers, calipers, gauges, and other precision measuring devices., • Visually inspecting threaded connections for defects, such as cracks, burrs, or missing threads., • Preparing reports that document their findings., • Understands all QA SOP's requirements and procedures. Requirements EDUCATION, TRAINING, AND CERTIFICATIONS: • Prefer 3 years' experience in a quality assurance function in an API Licensed pipe manufacturer and/or threader., • Proficient in spreadsheet tools (Excel, Smartsheet), manufacturing execution systems, data entry/retrieval, network file sharing, and online collaboration tools like SharePoint., • Good understanding of Mechanical Testing requirements for API 5CT and 5L products. CRITICAL COMPETENCIES & CAPABILITIES: Organized, adaptable, accountable, reliable/dependable, safety aware, team player, able to receive and provide constructive feedback, high standards for performance, continuous improvement/quality focus, excellent communicator, seeks growth and development, high attention to detail, self-directed independent contributor. MUST PASS BACKGROUND AND DRUG SCREEN

API 510/570/653 Inspector - TAR Work TEMPORARY PROJECT: 4-6 weeks beginning in mid-late July LOCATION: Midland, Texas Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking an API 510/570/653 Inspector to join our Asset Integrity Management team for a 3-4 weeklong project based in Midland, Texas. Must be willing to travel. What are we looking for? An API 510/570/653 Inspector position analyzing piping systems and circuits under the direction of Project Manager, Team Leader at a client facility during a TAR. Shift/Schedule: this is a short-term, project-based position working 12-hour shifts, 6-7 days per week for a period of approximately 3-4 weeks beginning on or around July 20, 2026. Salary & Benefits Information Individual compensation packages are based on a variety of factors unique to each candidate including skill set, experience, qualifications, and other job-related reasons. You also may be qualified to Per Diem dependent on distance from home address to client facility. What you'll do: Review and research documents to assist in determining piping systems and circuits. Interface with the client on technical matters involving Inspection procedures and capabilities Provide a professional appearance when interfacing with clients and other coworkers Stay abreast of any new developments in API-certified Inspection that may be applicable in our business This position outline is a general guideline and does not represent all encompassing details. The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties. What is takes to be successful in this role: Current API 510, 570 and/or API 653 certification with 5+ years' experience minimum; additional certifications a plus NDE and Drafting background preferred Valid TWIC card (required) Valid driver's license and reliable driving record (required) Excellent computer and organizational skills a must Self-motivated driven individual a must Must be able to apply examination criteria in accordance with applicable standards/specifications/procedures on the provided job scopes and evaluate test results Maintain open lines of communication with coworkers, clients, and subcontractors Ability to provide clear and technical guidance to other technicians and subcontractors (preferred) Ability to solve technical issues in the field. Intertek: Total Quality. Assured. Intertek is a world leader in the Quality Assurance market, with a proven, high-quality business model and a global network of customer-focused operations and highly engaged subject matter experts. With passion, pace, and precision we work to exceed our customers' expectations, while engaging with our employees to be 10X in their performance and professional growth. Intertek is a drug-free workplace. For certain safety-sensitive roles, a pre-employment drug screen will be required. Based on local law and legislation, marijuana may be included in that screening. We Value Diversity Intertek's network of phenomenal people are our greatest assets, and the diversity they bring fuels our success. Intertek is an Equal Employment Opportunity Employer that values inclusion and diversity. We take affirmative action to ensure all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other legally protected characteristics. For individuals with disabilities who would like to request accommodation, or who need assistance applying, please email intertekhrusa@intertek.com or call 1-877-694-8543 (option #5) to speak with a member of the HR Department. #LI-PA1 * Intertek does not accept unsolicited approaches from agencies and will not pay a fee for any placement resulting from the receipt of an unsolicited resume.

The Vertex Companies, LLC (VERTEX) is a global $150M professional services firm that offers integrated forensic consulting, expert witness services, construction project advisory, and compliance and regulatory consulting to a myriad of markets and industries. Our brand purpose is to better outcomes for our clients, colleagues, and communities. Join us if you are looking for a career that offers you a chance to love what you do, continuously learn, and take pride in your work. The Building Inspector will enjoy the challenge of working on multiple projects ranging from single-family homes to multi-family complexes. Our Quality Assurance inspectors ensure building codes, manufacturer installations, industry standards, etc. are being strictly adhered to. This position is field-based and will feel quite independent as our inspectors are usually on project sites most days and often working alone. The Quality Assurance team is part of the Project Advisory vertical at Vertex, which provides a variety of consulting and risk management services to a diverse and ever-expanding client base, working collaboratively with our clients for a safer and better built environment. • Perform\ daily field inspections for the following site visits for residential new construction: Foundations, Exterior and Interior MEPS, Exterior Envelope, Drywall, Interior and Exterior Final Assemblies., • Interact with the public and explain technical information to both technically and non-technically trained individuals., • Direct interaction with client representatives and fellow team members., • Review architectural plans for building components to ensure compliance with applicable codes., • Maintain accurate records of documented inspections, test results, and additional details pertaining to inspections., • Ensure that assignments are executed with technical proficiency, integrity, and professionalism., • Maintain computer logs of inspection reports, entering inspection results into permitting software., • Make employee safety a priority both in-house and on-site, in accordance with corporate policy., • Effectively coordinate with other team members as requested or assigned, able to provide guidance and monitor progress on assigned tasks or projects, and ensure work product produced by self or other assigned team members is consistently high quality, • Meet or exceed defined individual average utilization goals as set forth by company leadership, • Coordinate and support other team members as assigned in a “lead by example” manner, with emphasis on positivity and a culture that is empowered to execute, • Ensure compliance of operations with all local, state and Federal (and International, if applicable) regulations, as well as compliance with company policy, • Extensive knowledge of local building codes and current construction procedures/technology., • 3+ yrs. experience with Interpretation of codes in the field providing code compliant solutions., • Candidate must stay familiar and up to date with different editions and updates of the CA International Building Codes., • Must possess the ability to positively interact with the other staff members, the public, contractors, governmental entities, and other clientele., • Excellent verbal and written communication skills., • Good time management, organization, and attention to detail skills. · Demonstrated ability to exercise initiative and a considerable amount of independent judgment., • Candidate must be able to handle multiple projects in a fast-paced atmosphere., • Travel and/or field work (valid driver’s license and reliable vehicle required)., • Strong computer skills including Microsoft Office. Additional Discipline Qualifications & Competencies • ICC Residential Inspector Certifications required (Certification can be obtained while employed at Vertex)., • OSHA-10 or OSHA-30 certification preferred., • Education: Bachelor’s degree in Architecture, Engineering, or related field desired, but not required Physical Requirements • Walk job sites during inspections, sometimes on uneven terrain., • Climb scaffold., • Carry construction tools and equipment (up to 30 pounds) onto job sites with regularity The salary range for this role is $85,000 to $95,000 per year. All your information will be kept confidential according to EEO guidelines. VERTEX is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. If you require assistance to complete any part of the application process, please contact our Recruiting team at _. VERTEX offers a solid total compensation package including base salary and discretionary bonus plan. We also offer a robust benefits package including, healthcare (with multiple plan options) and dental; Company-paid Life Insurance, Short Term Disability, and Long-Term Disability. We offer a 401k plan with immediate match and vesting, Flex Spending Account, Employee Assistance Program, and other perks. We provide a generous paid time off plan for eligible employees including 15 days of vacation, 64 hours of sick time, and 9.5 paid holidays (prorated for eligible part-time employees). Our “Lifetime of Learning” program also offers tuition reimbursement and additional support for pursuing advanced education, to help employees grow their skills and careers. VERTEX is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. If you require assistance to complete any part of the application process, please contact our Recruiting team at _. NOTICE TO THIRD PARTY AGENCIES: Please note that VERTEX does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, VERTEX will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, VERTEX explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of VERTEX.

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and skilled Electrical integration associate. The Industrial Electrician is responsible for the installation of various electrical equipment used in buildings and enclosures, which meet dimensional requirements and NEC codes. Set up and align parts per shop prints in preparation for installation and perform electrical wiring operations, utilities, fire alarm systems, power supply systems, etc. and final electrical assembly. Working either individually, or as part of a small team to produce metal buildings and enclosures. Job Duties: • Consults blueprints, work orders, and/or schematics to safely construct specified structure; develops additional sketches if needed., • Conduit bending, threading and installation including EMT, RGS and RAL., • Installing electrical panels, breakers, fuses and ensuring that the electrical system is properly grounded., • Installing electrical wiring, wire, outlets, switches, junction boxes., • Installing electrical systems such as security systems, fire detection system, and UPS systems, • Installing fiber optic cable lines, communication lines, and power systems, • Installing electrical components in new buildings, machinery, computers, or other equipment, • Installing heating and cooling systems in industrial buildings, • Installing cable tray, and open wiring systems, • Install utility fixtures, outlets, terminal boards, switches, and wall boxes, using hand tools., • Cut openings and drill holes for fixtures, outlet boxes, and fuse holders, using electric drills and routers., • Measure, cut, and install frameworks to support conduit, control panels, junction boxes, and other devices using hand tools., • Reading technical diagrams and blueprints., • Design and installation of conduit to fit required space restrictions using 1-line diagrams per NEC codes and customer specifications., • Connects electrical systems to powerlines to provide electricity to the building., • General knowledge of electrical systems, wiring and NEC codes, • Using mechanical, electrical, and hydraulic benders., • Proficient in the use of test meters, meggers, and other diagnostic equipment., • Consult with engineers, engineering technicians, line installers and repairers, or industrial machinery mechanics and maintenance workers when performing installations., • Notify the lead person or Inspector when the product is ready for inspection., • Maintains a clean and safe work area each day and returns tools to their proper locations., • Performs other related duties as assigned. Requirements • Industrial Electrical Certification preferred, • Forklift certification preferred, • Experience in RIE and PEC Building preferred, • Experience in Electrical Racks preferred, • Extensive knowledge and comprehension of NEC and UL codes preferred, • Extensive knowledge of conduit bending preferred, • High school diploma or equivalent required, • Three plus years of experience in industrial electrical in a manufacturing environment required, • Three plus years of experience in the use basic tools (squares, clamps, fillet gauge, angle grinder, conduit bender, etc.) required, • Knowledge of NEC codes and comprehension of general electrical standard required, • Three plus years of experience in applicable QAPs (Quality Assurance Procedures) required, • Excellent communication skills both written and verbal required, • Ability to convert decimals to fractions and utilize conversion charts required, • Ability to read a tape measure and prints required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to stoop and bend required, • Ability to sit, stand, and walk for four plus hours at a time required, • Excellent color vision and eyesight required, • Alignment with company core values required Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid by Panelmatic for employee-only coverage, • 80% Panelmatic-paid / 20% employee-paid dependent coverage, • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and professional development, • PTO and paid holidays, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

The Quality Control Inspector (Manufacturing) provides quality control support in a metal fabrication shop environment for the manufacturing of custom designed piping enclosures and fittings in support field operations on a global basis. Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. Performs all duties as assigned and adheres to TEAM's Core Values. Works with facility management and customer's representatives to ensure customer satisfaction through the analysis and reporting of customer satisfaction data (i.e., customer surveys); identify, track and promote the resolution of customer issues; provide guidance to facility management for such resolution. Communicates and interacts with customers and third parties on all quality issues and other issues as designated by facility management in a manner that benefits the professional reputation of the company. Performs receiving inspection on incoming materials by confirming specification, conducting visual and measurement tests, rejecting and returning unacceptable materials. Approves in-process production by confirming specification, conducting required visual and/or dimensional inspections, or nondestructive testing processes and communicating results or required corrective measures needed to production supervision personnel. Documents all inspection results by completing required reports and logs timely, summarizing required re-work, inputting required data into databases as needed. Keeps measuring equipment operational and in good condition by following operating instructions, handling equipment properly, and storing equipment in accordance to manufacturer's directions. Determines appropriate inspection procedures and processes applicable to part or product. Perform the required inspection which may include any or all of the following: Checking required critical dimensions to specified tolerances; Assessment of machined finish and/or material hardness; Detection of cracks or other defects utilizing visual or other inspection methods; Inspection of critical components, tools, jogs, fixtures, and gauge devices; Inspect and set adjustable inspection instruments or tools to read-out accurately; Perform in-process inspections as required on shop floor; Assures that all required Quality Assurance inspection points have been completed for the part or assembly and verifying that all documentation is accurate and complete for the job package. Assures the overall quality of all manufactured products and for maintaining the quality standards by proper execution of the required duties in support of inspection and quality assurance standards established for the facility in accordance with work instructions for the commercial and nuclear industries. Partners with the Quality Control Supervisor and the facility management team to support the facility's quality goals and help ensure that the facility meets both internal and external customer expectations. High school diploma or equivalent required; Technical school or college degree preferred; Prefer 5+ years of inspection experience in a shop manufacturing setting; Ability to read and interpret Quality Control documents, codes, standards, and customer specifications; Solid working knowledge of blueprint reading; Basic understanding of Nondestructive Testing techniques (previous certification preferred), heat treating, and NDE and Heat Treat specifications; Working knowledge in the use of Tape Measure, Calipers, and Micrometers. Sufficient manual dexterity to handle and manipulate delicate parts and measuring instruments. Position is based out of a branch or site location; Field duties require indoor and outdoor work in a plant atmosphere; Interaction with other crew employees, as well as supervisors and client personnel; Working in plant and/or shop areas around production machinery with extreme noise levels; Must be able to wear safety equipment as required by the safety department for personal protection; May be at more than one job site in a day and must be able to tolerate climate changes; May be required to travel out of town on a periodic basis. Ability to lift and carry 75 pounds; Must be able to walk and climb except when performing non-field duties; Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively; Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine field duties; Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations; Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Category (For Job Seekers) Quality Location 13061 - Oil Gas Primary Sourcing - Houston, TX 77042 US (Primary) Job Description JOB DESCRIPTION * Sanmina Corporation (Nasdaq:SANM) is a leading integrated manufacturing solutions provider serving the fastest-growing segments of the global Electronics Manufacturing Services (EMS) market. Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. Sanmina Corporation has facilities strategically located in key regions throughout the world. Sanmina Energy (Houston) provides: Product Engineering with an emphasis on energy including very complex electro-mechanical systems; Assembly & Test for full electromechanical assemblies across multiple industries with capability to produce new and legacy [high temperature] printed circuit board assemblies; and Precision Machining with capabilities across the full material spectrum. Job Title: Quality Control Inspector Job Purpose: This position is responsible performing functions associated with quality control and quality assurance operations. The primary activity of this position is performing dimensional inspections of parts and assemblies to confirm conformance to drawings, applicable industry standards, purchase orders and other customer requirements. Nature of Duties: • Performing product inspections per internal, customer, and industry requirements as assigned based on training and experience. This may include:, • Dimensional and Visual Inspection of mechanical and electrical parts from internal and external suppliers (including Outside Process) using scopes and hand gages, such as but not limited to micrometers, calipers, and GO/NOGO Gauges., • Dimensional and Visual Inspections in support of internal machining to verify conformance to requirements using CMM and gages, such as MicroHite, Optical Comparator, Bore Gages, Gage Maker, and assorted hand gages., • Recording and maintaining logs of type and number of defects. Communicating findings to production team members, engineers, and management., • Reviewing material test reports and special process certificates against drawings and purchase order requirements to ensure supplier compliance to standards., • Performing First Article Inspections and creating report of findings., • Preparing NCR's to document defects in accordance with facility requirements., • Separating rejected parts and assemblies and identifying defect locations on the assembly., • Performing audits and familiarizing employees with established processes, policies, standards, and procedures., • Creating inspection test plans and bubble drawings to facilitate inspection data collection and control plan definition., • Reconciling and creating packages of final inspection documentation for shipments. Non-essential functions and duties: • Initiating and participating in continuous improvement processes., • Following the safety procedures of the organization., • Following the 5S procedures for work area., • Performs other duties as assigned. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to sure the individual with disabilities to perform the essential functions. • High School degree or GED, • 2+ years of quality experience, • Ability to read and understand drawings, customer standards, and purchase order requirements, • Must have the basic knowledge and experience with computers to include the use of word processing, spreadsheet, database and presentation software, • Requires excellent attention to detail., • Working knowledge of measurement instruments and tools., • Must have advanced knowledge of GD&T ASME Y14.5-2009., • Requires good time management skills with the ability to work independently with little supervision., • Ability to keep accurate records., • Ability to follow documented procedures and standard., • Defense/Aerospace Experience Preferred Language skills: • Ability to read and interpret training documents, safety rules, procedural documents, and blueprints., • Ability to read and understand drawings and purchase order requirements., • Strong communication and interpersonal skills both verbal and written., • Work requires a good command of the English language Reasoning ability: • The ability to apply general rules to specific problems to produce answers that make sense., • The ability to combine pieces of information to form general rules or conclusions (includes finding a relationship among seemingly unrelated events)., • Ability to apply common sense understanding to carry out instructions in written, oral, or diagram form., • Ability to deal with problems involving several concrete variables in standardized situations. Work environment: The work environment characteristics described here are representative of those employee encounters while performing the essential functions of this job: • Must be able to work and multi-task in a fast-paced environment., • Must be able to adapt to frequent changes to work processes. Sanmina is an Equal Opportunity Employer - M/F/Veteran/Disability/Sexual Orientation/Gender Identity • -------------------------------------------------------------------------------------------------------------------- This is an ITAR facility and applicant must be a US Citizen or a lawful permanent resident.