Trabajos random en Houston, TexasCrear alertas

NOTE: This position must be performed in Washington, DC so relocation to Washington, DC will be required. Recruitment Incentive: Applicants may be eligible for a $75,000 recruitment incentive in accordance with regulatory requirements. Click apply to view full details and eligibility of this recruitment incentive. At their core, those who join the Secret Service are courageous, intelligent, strong and determined. A diverse team capable of balancing our investigative mission and fulfilling our protective legacy. Proven to be worthy of trust and confidence. Be tomorrow's Secret Service. Duties During the course of their careers, Secret Service Police carry out assignments in protection. Duties include: • Providing protection for The White House Complex, The Vice President's Residence, The Main Treasury Building and Annex, and foreign diplomatic missions and embassies in the Washington, D.C. area., • Traveling in support of the Presidential, Vice Presidential, and foreign heads of state/government missions., • Enforcing mandated protective responsibilities as described under Title 18, United States Code, Section 3056A. Requirements • U.S. citizenship is required., • Possess a current valid U.S. driver's license., • Must be at least 21 years old at the time of application and under 40 at referral. Exceptions may apply for those with current or prior service in federal law enforcement positions covered by special retirement provisions. The Secret Service has determined that age is essential to the performance of this position., • Carry and use a firearm. Maintaining firearm proficiency is also mandatory., • Possess uncorrected visual acuity of no worse than 20/100 binocular. Possess corrected visual acuity of 20/20 or better in each eye., • Hearing loss, as measured by an audiometer, must not exceed 25 decibels (A.S.A. or equivalent I.S.O.) in either ear in the 500, 1000, and 2000 Hz ranges. Applicants must be able to hear the whispered voice at 15 feet with each ear without the use of a hearing aid., • Submit to a drug test prior to your appointment and random drug testing while you occupy the position., • Complete 12 weeks of intensive training at the Federal Law Enforcement Training Center (FLETC) in Glynco, GA or Artesia, NM and 17 weeks of specialized training at the James J. Rowley Training Center in Laurel, MD., • Certify that you have registered with the Selective Service System or are exempt from having to do so, if you are a male applicant born after December 31, 1959.

Job Description Looking for a CDL flatbed driver for over the road. / Busco un chofer con licencia commercial para manejar fuera del estado. Requirements/ Requisitos CDL- 2 yrs/ CDL- 2 años Must speak and understand English./ Debe hablar y entender Ingles. Flatbed experience needed./ Debe tener experiencia en flatbed. We use ELD/ Usamos ELD. Paid every Friday via ACH. Must past initial drug screen and be subject to random testing per FMCSA. Call or text 281 733 7972 for more information. Thank you! Company DescriptionSmall fleet trucking companySmall fleet trucking company

Job Description Job Overview: The CDL Driver position is responsible for ensuring goods, products and items are transported from designed and assigned locations in a safe, timely, and efficient manner, while also ensuring high levels of customer service are applied in the transport of goods, products and items. Essential Duties & Responsibilities: • Delivers a wide variety of items to different addresses using different routes from one location to another location., • Follows assigned route and time schedules for transport, delivery, and/or retrieval of goods, products and items., • Exercises sound judgment and decision making upon receiving notifications and/or instructions to divert from originally planned route and time schedule due to circumstances including, without limitation, change in customer requirements, weather conditions, order and/or motor vehicle operability., • Fulfills customer orders, or otherwise assists personnel in customer order fulfillment prior to dispatching of driving delivery of good, products and items to the customer., • Pre inspect truck for safety compliance., • Loads, unloads, prepares, inspects and operates motor vehicle used in the performance of duties in a safe, efficient and law compliant manner., • Inspects all goods, products and items to be transported and upon delivery of transport to ensure all goods products and items ordered by customer are present and in acceptable and appropriate condition in accordance with company standards., • Asks customers for feedback on provided services, addresses general and routine questions and issues from customers, and escalates non-routine and complex questions, issues and matters to appropriate company management personnel., • Completes logs and reports timely, accurately and completely, and submits these documents to appropriate company personnel., • Enters and documents driving and delivery activity in appropriate systems accurately, timely and completely., • Adheres to federal and state Department of Transportation regulations and safety standards, as applicable., • Adheres to all applicable local and state roadway motor vehicle operation regulations., • Reports safety related incidents promptly to appropriate company personnel, and provides all pertinent information to designed company personnel in a timely, accurate and complete manner., • Contributes ideas on ways to improve or optimize warehousing procedures., • Consistently displays integrity, responsibility, accountability, teamwork and ethics., • Performs assigned job duties and responsibilities in accordance with company policies, procedures and standard practices., • Performs other duties as assigned. Truck Driver Skills and Qualifications: • Traffic laws/ DOT regulations/ driving knowledge, • Pallet jack experience required; forklift experience preferred, • Ability to lift 80 pounds repeatedly throughout day, • Able to pass random drug tests, • Clean driving record, • No DUI/DWI convictions in the past seven years, • Listening and verbal communication skills, • Dependability Education, Experience, and Age Requirements: • High school diploma or equivalent, • CDL – Class A or Class B, • Certificate from an accredited CDL school, • 21 years or older, • HAZMAT endorsement preferred, • TWIC card preferred

Job Description Nexus Towing is looking for light duty Tow Truck Operators with excellent customer service skills. As one of our tow truck operators, you will be performing Consent Tows only. You will be responsible for safely operating a truck with a capacity up to 26,000 pounds Gross Vehicle Weight (GVW). We are a very diverse company looking to hire quality people that are willing to represent us well on a daily basis. No experience necessary! WE WILL TRAIN the right hardworking individuals. Must have a clear driving record and pass pre-employment drug test and background check. No DUI/DWI. A successful candidate will have a strong work ethic and a high degree of mechanical aptitude. Responsibilities: • Safely operate a flatbed/wheel lift tow truck, • Load and unload vehicles, • Properly track and document activity log, • Report any issues or incidents to dispatch, • Inspect truck before and after trip Qualifications: • Must be at least 25 years old., • Must be able to pass a pre-employment & random drug screening, • Ability to work independently, • Ability to handle physical workload, • Ability to coordinate and take direction from dispatchers, • Ability to learn and use the Towbook Application, • Strong work ethicCompany DescriptionWe tow for several major body shop chains in 7 major markets throughout 4 states. No police towing or overnight work.We tow for several major body shop chains in 7 major markets throughout 4 states. No police towing or overnight work.

Recruitment Incentive: Applicants may be eligible for a $40,000 recruitment incentive in accordance with regulatory requirements. Click apply for complete details on the recruitment incentive details and eligibility. At their core, those who join the Secret Service are courageous, intelligent, strong and determined. A diverse team capable of balancing our investigative mission and fulfilling our protective legacy. Proven to be worthy of trust and confidence. Be tomorrow's Secret Service. During the course of their careers, special agents carry out assignments in both investigations and protection and may be assigned to multiple duty stations throughout the U.S. and abroad. Duties include: • Providing protection for various protectees., • Conducting criminal investigations pertaining to financial obligations of the United States., • Planning and implementing security designs for National Special Security Events. This is no ordinary job, and our special agents are no ordinary individuals. Show us you have the talent and background we need, and we'll show you the rewards that come with being a special agent in the U.S. Secret Service. We invite you to become part of our elite team. Explore a career that will take you to new heights while you serve your country with honor, distinction and pride. Requirements • U.S. citizenship is required, • Possess a current valid driver's license, • Carry and use a firearm. Maintaining firearm proficiency is mandatory., • Be at least age 21 at the time of application and less than age 37 at the time you receive a conditional offer of employment, unless you have previous service in a Federal Civilian Law Enforcement position covered by special law enforcement or firefighter retirement provisions, including early or mandatory retirement. Applicants with veteran's preference must receive a conditional offer of employment prior to reaching age 40 to continue in the application process., • You must obtain a Top Secret Clearance and retain it during your career., • Possess uncorrected visual acuity of no worse than 20/100 binocular, possess corrected visual acuity of 20/20 or better in each eye., • Hearing loss, as measured by an audiometer, must not exceed 25 decibels (A.S.A. or equivalent I.S.O.) in either ear in the 500,1000 and 2000Hz ranges., • Submit to a drug test prior to your appointment and random drug testing while you occupy the position., • Complete 13 weeks of intensive training at the Federal Law Enforcement Training Center(FLETC) in Glynco, GA and 18 weeks of specialized training at the James J. Rowley Training Center in Laurel, MD., • Sign a mobility agreement stating your willingness to accept assignments anywhere within the United States and overseas., • Certify that you have registered with the Selective Service System or are exempt from having to do so, if you are a male applicant born after December 31, 1959.

Purchasing Coordinator We are Lennar Lennar is one of the nation's leading homebuilders, dedicated to making an impact and creating an extraordinary experience for their Homeowners, Communities, and Associates by building quality homes and providing exceptional customer service, giving back to the communities in which we work and live in, and fostering a culture of opportunity and growth for our Associates throughout their career. Lennar has been recognized as a Fortune 500® company and consistently ranked among the top homebuilders in the United States. A Career that Empowers You to Build Your Future The Purchasing Coordinator is responsible for providing administrative support to the Manager and/or Purchasing Department through a range of responsibilities. This role requires the ability to manage multiple tasks within deadlines, demonstrate good judgment, and maintain a professional, supportive attitude. A career with purpose. A career built on making dreams come true. A career built on building zero defect homes, cost management, and adherence to schedules. Your Responsibilities on the Team Track subcontractor/supplier insurance using the IDS database. Distribute new vendor/subcontractor packages. Perform filing, copying, and other administrative tasks within the department. Assist Purchasing with bidding for new projects. Interface with the Accounting Department to ensure timely payment for subcontractors. Input, print, and fax information to trades using JD Edwards. File and mail Notices of Completion. Order appliances for each community. Prepare and distribute bidding packages and set up new vendors for new communities. Prepare weekly production reports, community books and product cut-sheets. Assist in field operations administration. Prepare correspondence for other departments, government entities, homeowners, etc. Prepare and distribute Sequence sheets to trades and field personnel. Order homesite-specific plot plans. Coordinate plan-ordering activities, including online setup and distribution. Process and follow up on utility deposit refund requests. Audit and track contractor license information for all trade partners. Maintain lumber tracking spreadsheet using Random Lengths weekly reports. Update and maintain Master Trade Partner/Bid lists. Provide backup support for Contracts Administrator and receptionist duties. Your Toolbox High School Diploma or equivalent required; college education preferred. At least 2 years of office or administrative experience. Proficient with computers and experienced with JD Edwards, AutoCAD, Buzzsaw, BuildPro/SupplyPro, and Excel. Capable of handling multiple detail-oriented tasks with concurrent deadlines. Strong writing skills and exceptional organizational abilities. Demonstrates a strong work ethic, integrity, and loyalty. Effective team player with the ability to perform well under pressure. #LI-AS1 Life at Lennar At Lennar, we are committed to fostering a supportive and enriching environment for our Associates, offering a comprehensive array of benefits designed to enhance their well-being and professional growth. Our Associates have access to robust health insurance plans, including Medical, Dental, and Vision coverage, ensuring their health needs are well taken care of. Our 401(k) Retirement Plan, complete with a $1 for $1 Company Match up to 5%, helps secure their financial future, while Paid Parental Leave and an Associate Assistance Plan provide essential support during life's critical moments. To further support our Associates, we provide an Education Assistance Program and up to $30,000 in Adoption Assistance, underscoring our commitment to their diverse needs and aspirations. From the moment of hire, they can enjoy up to three weeks of vacation annually, alongside generous Holiday, Sick Leave, and Personal Day policies. Additionally, we offer a New Hire Referral Bonus Program, significant Home Purchase Discounts, and unique opportunities such as the Everyone’s Included Day. At Lennar, we believe in investing in our Associates, empowering them to thrive both personally and professionally. Lennar Associates will have access to these benefits as outlined by Lennar’s policies and applicable plan terms. Visit Lennartotalrewards.com to view our suite of benefits. Join the fun and follow us on social media to see what's happening at our company, and don't forget to connect with us on Lennar: Overview | LinkedIn for the latest job opportunities. Lennar is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws.

Job Description Address: 150 N Dairy Ashford Rd Ste E-0172, Houston, TX 77079 Role: Provide Branch Manager with support, assistance and leadership regarding all aspects of branch operations to ensure superior service is provided to all internal and external members. Assist with the development, modification and implementation of procedures for daily branch operations. Assure the financial service needs of each member are promptly, accurately, and courteously fulfilled. Responsible for the maintenance and security of the branch facility and its contents in the absence of the Branch Manager. Essential Functions & Responsibilities: Support Branch Manager in all areas of branch operations, including but not limited to member services, lending, staff performance management, compliance and facilities. Perform duties of Branch Manager in their absence. Actively educate and inform members on all credit union products and actively cross-sell all products/services. Assist member(s) with transaction requests and account inquiries in a timely and accurate manner and perform all functions associated with account maintenance as requested including but not limited to personal and account data changes, address changes, and account closures. Perform regular cash audits on MSR cash drawers on a random basis as well as cash audits on vault and ATM cash, if applicable. Provide feedback to appropriate management staff on interviewing/hiring process, counseling/documenting all branch personnel performance issues and performance reviews.10% Resolve and follow-up on member complaints and issues to insure the highest quality member service. Other job duties as assigned. Performance Measurements: 1. Actively educate and inform members on all credit union products and actively cross-sell all products/ services to meet member needs and individual goals., 2. Possess and maintain excellent knowledge of all credit union products, services, policies and procedures so that they can be effectively communicated to the branch employees and members., 3. Must be available to travel to any branch location for support as requested by management, as well as work on Saturdays when scheduled., 4. Present a professional image and attitude at all times, 5. The dedication to meeting the expectations and requirements of internal and external members, use feedback for continuous improvement, and develop and maintain effective relationships., 6. Prioritize tasks to use time efficiently and attend to a broad range of activities. Knowledge and Skills: Experience - One year to three years of similar or related experience. Education - High school diploma or equivalent. One to two years college preferred. Must be knowledgeable of Bank Secrecy Act and Anti-Money Laundering regulations and requirements. Interpersonal Skills - Work involves contact with persons beyond immediate associates regarding routine matters for the purpose of giving or obtaining information which may require some discussion. Outside contacts take the form of service to the public (members or vendors), requiring ordinary courtesy in providing assistance and information. Other Skills- The ability to speak and write clearly and effectively to achieve the desired effect in a variety of communications settings and styles. The ability to prepare and maintain confidential records and reports. Must have a workable knowledge of Microsoft Office products, including but not limited to Word, Excel and Outlook. Must have a proactive and positive attitude toward members, supervisors, co-workers and the credit union. Ability to handle multiple projects simultaneously and work with limited supervision, exercising own initiative and judgment. The ability to effectively prioritize tasks to use time efficiently and attend to a broad range of activities. Excellent knowledge of Credit Bureau Reports. Physical Requirements While performing the duties of the job, the employee is regularly required to : -Position self to move about the work area. -Reach, grab, sort. -Communicate in person and via telephone with others. -Identify and recognize small font communication. -Ability to transport a minimum of 10 pounds.

Job Description About Rotating Machinery Services (RMS) Rotating Machinery Services (RMS) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. RMS provides operators of rotating equipment with unparalleled service rooted in strong engineering, technical expertise, and responsiveness in both pricing and lead times. RMS combines engineering experience, craftsmanship, and cutting-edge technology to deliver best-in-class results to its customers. With a nimble, collaborative culture, RMS continues to drive improvement across the turbomachinery industry. Position Summary The General Manager (GM) of the BJ Superior facility is responsible for the overall operation of the site, including health and safety, quality, delivery performance, and financial results. The GM will lead daily management, set performance goals, and ensure effective communication and alignment across all functions. As a specialized manufacturing and repair facility focused on Babbitted bearings and sealing solutions, the GM will play a key role in optimizing operations, strengthening technical capabilities, and supporting the continued growth of RMS’s vertically integrated supply of critical rotating equipment components. This leader must bring high energy, technical competence, and a hands-on approach while promoting RMS’ culture of accountability, collaboration, and continuous improvement. Key Responsibilities LEADERSHIP & CULTURE • Set and uphold a strong safety culture; ensure compliance with all safety policies and procedures., • Lead by example with a focus on integrity, fairness, and open communication., • Build a culture of accountability, teamwork, and continuous improvement., • Drive daily management practices, ensuring performance KPIs are visible and actionable., • Foster collaboration between functional leads to ensure alignment and efficiency., • Serve as a visible leader who drives results through engagement, empowerment, and cross-functional collaboration. OPERATIONAL SUPPORT • Oversee all shop operations including Babbitt casting, machining, assembly, and inspection., • Ensure adherence to quality standards, delivery schedules, and cost targets., • Collaborate with Planning/Scheduling to drive on-time project completion., • Maintain ownership of KPIs, leveraging data to identify improvement opportunities and reduce cycle time., • Ensure proper utilization of manpower, equipment, and facilities., • Coordinate preventive maintenance and facility improvements., • Support repair, manufacturing, and engineered order work conducted within the BJ Superior facility. TECHNICAL OVERSIGHT • Provide leadership and technical guidance during disassembly, inspection, repair, and manufacturing of Babbitted bearings and sealing systems., • Ensure compliance with manufacturing and repair methods for:, • Hydrodynamic and tilting pad bearings, • Journal and thrust bearings, • Labyrinth and oil sealing systems, • Support production of high-speed oil seals and custom sealing solutions for compressors, turbines, motors, and pumps., • Partner with Engineering on OEM replacements, reverse engineering, and retrofit solutions., • Support Quality Control in troubleshooting non-conformances and root cause analyses., • Review and interpret complex drawings, tolerances, and technical procedures., • Maintain familiarity with metallurgical processes, Babbitt materials, machining practices, and balancing principles. PEOPLE & DEVELOPMENT • Recruit, train, and mentor staff and craft labor to build a high-performing team., • Partner with HR to resolve personnel matters and ensure adherence to RMS policies., • Conduct timely performance evaluations and maintain training and skills matrices., • Promote knowledge transfer in specialized bearing and sealing technologies., • Encourage employee engagement, ownership, and professional growth. FINANCIAL & BUSINESS MANAGEMENT • Manage site-level P&L, including CAPEX, OPEX, headcount, and utilization., • Identify risks and implement mitigation strategies., • Participate in business planning and resource allocation decisions., • Support growth initiatives tied to aftermarket services, OEM replacement parts, and engineered upgrades. Required Qualifications • Minimum 5 years of leadership experience within the rotating equipment, turbomachinery, or precision manufacturing industry., • Demonstrated success managing operations with responsibility for safety, quality, delivery, and cost., • Strong technical understanding of bearing systems, sealing technology, or rotating equipment repair/manufacturing processes., • Working knowledge of ERP systems, BOM structures, and production workflows., • Excellent organizational, analytical, and communication skills., • Ability to lead cross-functional teams and foster collaboration across departments., • Willingness to be hands-on in a shop environment. Preferred Qualifications • Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering or equivalent relevant experience., • Experience with Babbitt bearing manufacturing, repair, or metallurgical processes., • Familiarity with Lean, 5S, or Kaizen methodologies., • Previous P&L responsibility at a site or business unit level., • Experience supporting high-speed rotating equipment applications. ADDITIONAL REQUIREMENTS • The position may be based in RMS’s South Houston, TX facility., • This is a full-time position, with a minimum expectation of 40 hours per week, averaging 45 hours per week. Additional hours, including evenings or weekends, may be required based on project needs., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Must possess a valid driver’s license, • Ability to pass pre-employment drug, alcohol test, and background check., • Ability to act professionally under stressful situations., • Able to understand, read, write and speak English., • Ability and willingness to lift objects weighing up to 50 lbs. (with assistance), • While performing the duties of this position the employee will be required to stand, sit, bend, and walk for significant portions of the shift, • Must not have allergies or issues related to handling metals, including aluminum, copper, bronze, and steel., • Authorized to work in the United States, • RMS Inc. may have government contracts that impose specific requirements on employees working on those projects. If an employee does not meet these requirements, they may be reassigned to a different location or be ineligible to work on certain assignments. Work Environment • While performing the duties of this position, the employee may enter a shop environment and will be exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machine operations that generate moderate noise and metal particles. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs, • Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! Visit www.rotatingmachinery.com to learn more about who we are and what we do. ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Vision insurance Field Operations Specialist Position Overview Ensure field deployment excellence for Skipper NDT's advanced magnetic data acquisition systems while building partnerships through comprehensive training and technical support. This role combines hands-on technical expertise with client relationship management to expand our market presence and ensure operational success across North America. Key Responsibilities Field Operations & Data Acquisition • Deploy and operate Skipper NDT's magnetic data acquisition technologies (drone and land-based) in diverse field environments, ensuring successful data collection and adherence to operational procedures and project specifications, • Execute comprehensive field operations including equipment validation, vector selection optimization, current injection, QHSE compliance, real-time data quality assessment, and efficient mobilization/demobilization activities, • Serve as the primary point of contact for clients during field execution, maintaining professional relationships and addressing and resolving technical inquiries, • Effectively liaise with key Skipper NDT and client personnel throughout project lifecycle to ensure operational excellence and safe execution to deliver an outstanding customer experience., • Maintain detailed documentation of field operations, technical issues, and recommended improvementsPartner Support, • Provide ongoing mentorship and technical support to certified partners, ensuring consistent service delivery across all deployments, • Provide field support to certified partners as requiredRequired Qualifications Education & Experience • Minimum of 2 years of progressive field operations experience in performing land surveying or drone based inspection techniques for the oil and gas, energy, or utility industries, • Preferred:, • Associates degree in Applied Sciences or related technical discipline., • Current FAA Part 107 Remote Pilot Certificate (drone license) with clean operating record Technical Expertise • Working knowledge of GIS systems, base stations, and GIS data acquisition principles, • Comprehensive knowledge of UAV systems, flight planning, and deployment, • Strong mechanical aptitude with experience in equipment operation and maintenance, • Proficiency in data acquisition, analysis, and validation techniques, • Understanding of QHSE standards and regulatory compliance requirements in the oil&gas, energy, and utility industriesProfessional Skills, • Strong verbal and written communication abilities, • Proven ability to work independently in challenging field environments while maintaining safety and quality standards, • Strong problem-solving skills with ability to make critical decisions under pressure, • Strong organizational skills, capable of managing multiple, complex tasks simultaneously., • Must be process and procedure focused with dedication to quality and safety., • Customer service oriented. Travel Requirements • Ability to travel up to 75% within assigned territory, including extended field assignments, • Valid driver's license with clean driving record, • Valid passport or ability to acquire, • Flexibility to work irregular hours based on project demands and client schedulesPhysical Requirements Capable of lifting 50 lbs. or greater Walking large distances over varying terrains Working outside for extended periods of time and potentially in adverse weather conditions Ability to assemble, test, and troubleshoot field equipment on-site Must meet DOT drug and alcohol testing requirements, including pre-employment screening, random testing, and post-accident testing Must pass DOT physical examination and maintain valid DOT medical certification Skipper NDT is an equal opportunity employer committed to diversity and inclusion.

Job Description Job Summary RMS Pearland Works is seeking an experienced 2nd Shift Shop Foreman to lead all shop labor and daily execution within our Rotating Equipment repair facility. This role is responsible for overseeing the Mechanic, Machinist, Weld and Balance Tech Leads, ensuring safe, efficient, and high-quality execution of all active projects across the shop floor. With a strong foundation in rotating equipment repair, from pumps to compressors and beyond, and deep working knowledge of API standards, the Shop Foreman provides floor-level leadership, technical guidance, and workforce direction across all work centers. This position requires a seasoned mechanic background, the ability to manage competing priorities, and the leadership presence to guide multiple teams while supporting consistent throughput and customer satisfaction. The Foreman plays a critical role in aligning labor, schedule, and technical execution in close collaboration with Project Management, the Production Supervisor, and the General Manager. Key Responsibilities Shop Leadership and Oversight • Directly oversee the Mechanic, Machinist, Weld and Balance Tech Leads to drive daily execution, efficiency, and accountability, • Ensure clear tasking, job ownership, and cross-team communication across all shop labor functions, • Align team assignments with workload priorities and available capacity based on real-time shop demands, • Maintain visibility on daily progress across disassembly, developing work scopes, machining, inspection, assembly, and testing activities Technical Direction and Equipment Expertise • Provide expert technical guidance on repair methods for pumps and other rotating equipment, with strong emphasis on adherence to API standards throughout the inspection, repair, and assembly process, • Support repair execution on overhung, between bearing, and vertical pumps, as well as gearboxes, liquid ring compressors, screw compressors, centrifuges, and small steam turbines, • Ensure all precision measurement practices, fits, and tolerances are correctly applied throughout the repair process, • Review job documentation, drawings, and BOMs for accuracy and completeness before and during execution Safety and Quality Compliance • Promote a culture of safety-first thinking across all shop activities and enforce strict adherence to RMS safety protocols, • Partner with QC and Engineering to ensure that jobs meet internal quality standards and industry specifications, • Identify and help resolve quality issues through structured root cause and corrective action efforts Workforce Development and Planning • Mentor and coach shop leads and craft personnel to grow technical skillsets and job ownership, • Support onboarding and training of new hires and lead competency evaluations using the Employee Skill & Training Matrix, • Assist in resource planning for large projects, outages, and customer turnarounds Cross-Functional Collaboration • Work in close coordination with Project Management, the Production Supervisor, and the General Manager to ensure labor alignment with job priorities and facility goals, • Provide real-time updates in daily production meetings, including progress reports, risk flags, and mitigation recommendations, • Act as the shop’s central point of contact for operational execution, bridging communication between the floor and supporting departments Qualifications and Requirements Experience • Minimum 10 years of rotating equipment experience with at least 3 years in a lead or supervisory role, • Strong hands-on background as a mechanic with extensive knowledge of rotating equipment assembly, • Demonstrated experience applying API standards in inspection, repair, and reassembly, • Familiarity with RMS and non-OEM turbomachinery including compressors, turbines, valves Skills • Proven leadership across multi-discipline shop teams, • Ability to interpret mechanical drawings, BOMs, and technical specs with precision, • Expert in the use of micrometers, calipers, indicators, and other measuring tools, • Strong written and verbal communication skills, • Basic computer proficiency for job tracking and reporting Education • High school diploma or GED from an accredited school or institution, • Post-secondary mechanical training or trade certification preferred Other Requirements • The position may be based in RMS’s Pearland Works facility., • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends may be required based on project needs., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Ability to act professionally under stressful situations., • Able to understand, read, write and speak English., • Ability and willingness to lift objects weighing up to 50 lbs. (with assistance), walk, climb, reach, kneel, crawl, and balance., • Must be able to use hands for assembling and tool usage, • While performing the duties of this position the employee will be required to stand, sit, bend, and walk for significant portions of the shift, • Must not have allergies or issues related to handling metals, including aluminum, copper, bronze, and steel., • Must possess a valid driver's license., • Ability to pass a pre-employment drug, alcohol screening and background check., • Authorized to work in the United States., • RMS Inc. may have government contracts that impose specific requirements on employees working on those projects. If an employee does not meet these requirements, they may be reassigned to a different location or be ineligible to work on certain assignments. What We Offer • Competitive pay, • Paid time off and company holidays, • Medical, dental, and vision insurance, • 401(k) with company match, • Employee development and incentive programs Come lead a team where expertise, pride in craftsmanship, and customer trust define success. Learn more at www.rotatingmachinery.com and be part of something that keeps industry moving.

No corp. to corp. or agencies for this position. Must be able to get Secret Security Clearance for this posiiton Working with top-secret rocketry. Position Summary The Structural Analysis Engineer is responsible for performing structural analysis of hardware. LS- DYNA is the must have • Performs classical and FEA (linear/non-linear statics, modal, frequency response, random response, explicit and implicit transient) analyses of flight hardware, oil field components and other system, • Performs detailed calculations to ensure structural integrity of hardware for failure modes, including but not limited to static, fatigue, fracture, buckling, stability, and cree, • Performs detailed calculations to ensure structural integrity of mechanical joints such as welds and fastener, • Assists the Project Managers and Integrated Product Teams in the support of meeting customer needs, including preparation of proposals, change requests, design reviews, and meeting other requirements related to the design effor, • Prepares presentations and interim reports based on analysis and test data during the design phase, • Prepares and coordinates formal design approval documentation and coordinates design approval with customer, • Assists in the development of fracture control assessment and fatigue-life analysis of flight hardware, • Uses appropriate analysis techniques, simplifications, assumptions, and experience-based judgments, to solve complex problems, • Documents analysis results and generates reports for hardware certification.

Pilot in Command – Citation XLS/XLS+ Full-Time – Houston, TX Jet Linx is seeking qualified Pilot in Command candidates for our Midsize jet aircraft for Part 91 and 135 flight operations. It is expected that the candidate lives, or be willing to relocate, within a 2-hour call out time of their home base. Position Summary: The Pilot in Command (PIC) reports directly to the Base Chief Pilot. The PIC prepares and ensures the safe and efficient operation of company aircraft in accordance with the Federal Aviation Regulations and company procedures. Minimum Requirements: • Total Time - 3500 hours, • Total PIC - 2000 hours, • Total Time in Type - 250 hours, • Total PIC Time in Type - 250 hours, • Total Multi-Engine - 1500 hours, • Total Multi-Engine PIC - 500 hours, • Total Turbine - 500 hours, • Total Instrument - 300 hours Essential Functions: • Manage duty, flight, and rest times to requirements of both the company and CFRs, • Maintain communication with the company for standby duty assignments, trip notifications, position calls, and pre- and post-flight reports, • Maintain and manage electronic flight bag (EFB) hardware and applications, • Ensure navigation charts, publications, and company manuals are current, • Maintain a current 1st Class medical certificate, • Convey strong, proactive decision-making skills, • Demonstrate Jet Linx’s core values in all interactions Other Requirements: • Initial or Recurrent 142 training in type within the last 24 months is preferred., • Ability to obtain a U.S. driver's license, • Proof of eligibility to work in the US, • Current passport, • ATP (ability to obtain ATP), • 1st Class Medical, • FCC Restricted Radio License, • Ability to pass a pre-employment drug screen and submit to random drug/alcohol testing when required; anyone in a safety-sensitive function will be required to undergo pre-employment drug testing for the presence of marijuana, cocaine, opiates, phencyclidine (PCP), and amphetamines., • Unrestricted ability to travel to Canada and Caribbean countries, • Ability to release and pass a FAA Pilot Record Database review with a System Chief Pilot, • Ability to work nights, weekends, and holidays, • Bachelor’s degree or equivalent work experience required, • Majority of work is completed in and around aircraft and aircraft terminals, • Move up to 50 pounds on a frequent basis Compensation: Jet Linx offers a competitive compensation and benefits package to team members. Starting base annual salary for this position ranges from $145,000 to $200,000. Actual base salary provided is dependent upon geographic location, aircraft size (crew positions), relevant education, training and experience of the candidate. Our comprehensive benefits package includes health, dental and vision insurance, 401(k) with 6% company match, paid time off and company paid life and short-term disability coverage.

Job Description Join GlobalTech Motor & Controls in a clean, climate-controlled facility where your expertise is valued. We are looking for a precision-focused Winder to handle diverse projects, from random wound to 500+HP form wound motors. *Pay will commensurate with experience* If you have the experience I'm open to a conversation! Key Responsibilities • Full Restoration: Lead the process from stripping and iron prep to coil insertion and brazing connections., • Precision Testing: Perform and document critical electrical tests (Megger, Surge, Hipot, Core Loss)., • Data Integrity: Accurately record all winding and connection data for high-standard QC documentation. What You Bring • Experience: 3+ years of winding expertise (AC/DC, random, and form wound)., • Technical Skill: Proficiency in brazing and using advanced motor testing equipment., • Detail-Oriented: A commitment to accuracy and high-quality craftsmanship. Upgrade your workspace and your career. Apply today! Company DescriptionGlobalTech Motor & Controls, Inc., is a full service electric motor and generator manufacturing and repair facility located in Houston, Texas. Our mission is to provide our customers with the highest quality products and services available, within the time frame promised, and at a competitive price.GlobalTech Motor & Controls, Inc., is a full service electric motor and generator manufacturing and repair facility located in Houston, Texas. Our mission is to provide our customers with the highest quality products and services available, within the time frame promised, and at a competitive price.

Job Description Master Technician / Automotive Mechanic – European & Domestic Vehicles Shipley Automotive – Rosenberg, TX | Pay: Flat Rate $45/hr | Schedule: Monday–Friday, 9 AM – 5 PM Shipley Automotive, a high-end European and Domestic repair and performance center serving the Rosenberg/Fulshear area, is seeking an experienced Master Technician / ASE Master Technician to join our growing team. We specialize in BMW, Mercedes-Benz, Porsche, Audi, Volkswagen, and other performance brands, offering dealership-level service in a clean, modern, and professional environment. The ideal candidate will have at least 3 years of experience as a Master Certified Technician, strong diagnostic and mechanical skills, and the ability to perform multi-point inspections, Texas state inspections, and complete vehicle diagnostics on European and Domestic vehicles. Responsibilities include performing precision repairs, advanced diagnostics, and maintenance work while maintaining a clean and organized workspace and communicating clearly with the service team. Candidates must have a valid driver’s license with a clean driving record, be able to pass random drug testing, and demonstrate professionalism, punctuality, and attention to detail. Pay is a flat rate system at $45 per hour based on performance and efficiency. Shipley Automotive offers a modern facility with premium tools, consistent workflow, and a culture built on integrity, craftsmanship, and excellence. Keywords: Automotive Technician, ASE Master, BMW Mechanic, European Auto Technician, Diagnostic Technician, State Inspector, Flat Rate Technician, Automotive Repair. Apply today and join Shipley Automotive—where precision meets passion. Company DescriptionShipley Automotive is a premium European and Domestic repair center built on integrity, craftsmanship, and passion. We specialize in brands like BMW, Porsche, Audi, and Mercedes-Benz, delivering dealership-level service in a professional, clean, and modern environment. Our team values precision, pride, and respect—no drama, no shortcuts, just quality work done right.Shipley Automotive is a premium European and Domestic repair center built on integrity, craftsmanship, and passion. We specialize in brands like BMW, Porsche, Audi, and Mercedes-Benz, delivering dealership-level service in a professional, clean, and modern environment. Our team values precision, pride, and respect—no drama, no shortcuts, just quality work done right.

SUMMARY OF COMPANY Southwest Shipyard, LP provides gas freeing and cleaning services, steaming, and flaring services, Barge and Boat repair, Surface preparation and painting, water treatment and new construction services to the commercial and government marine industry. Southwest Shipyard owns and operates four (4) shipyards in South Texas with direct deep-water access to the Gulf of Mexico. We take pride in our dedicated and experienced workforce that focuses on Quality, Safety and Environmental Excellence. Our motto is “Faster, Safer, Better”. JOB SUMMARY This position is primarily responsible for using electrical currents to fuse metals like steel together to repair parts or build new components. (SMAW) PAY RANGE *Pay is determined by Internal Weld Test Classification Results - 3G/4G Weld Test **HR will contact qualified applicants to schedule on-site weld test. WORK SCHEDULE Regular attendance and punctuality are required of all employees. Varies by Department and/or Location. Day Shift: 6:00am - 3:30pm Night Shift: 3:30pm - 12:00am (Midnight) Overtime and/or Weekend Availability required. Channelview Location. (18310 Market St, Channelview TX, 77530) BENEFITS • Competitive Salary., • Comprehensive Benefits (medical, dental, vision, life)., • 401(k)/Retirement Savings., • Friendly Work Environment., • Paid-Time off/Holidays., • Career Path Opportunities RESPONSIBILITIES • Grind barge & boat repair areas, internal compartments & cargo tanks, and external surface areas in preparation for welding., • Weld barge & boat repair areas, internal compartments & cargo tanks, external surface areas, and specialty components & areas with the required number of passes to achieve full penetration welds., • Operate welding & grinding equipment, blowers, hoses, etc., to accomplish weld & repair duties., • Must pass a welding test to obtain internal skill classification., • Mandatory drug testing prior to employment, and will be subject to random, unannounced drug and/or alcohol tests during employment., • Must be able to communicate and take directions from Foreman & Supervisor., • Able to work without contact lenses., • Required to arrive to work on time and also work overtime hours as required., • Understand general policies and procedures as described in the quality & environmental manuals., • Required to undergo a training program and participate in refresher training as needed., • Must have or be eligible for a TWIC card. EXPERIENCE & QUALIFICATIONS • Must be proficient in English and be able to communicate effectively with others; Bilingual English/Spanish preferred., • Ability to multitask, learn quickly, and meet deadlines as needed., • Ability to understand Company Quality Manual and procedures described and required., • Ability to manage time and tasks effectively and efficiently., • High School Diploma or GED equivalent preferred. PHYSICAL / MENTAL REQUIREMENTS The employee must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses, life vest, respirators, ear plugs, steel toed shoes, personal flotation devices (PFD’s), or other protective equipment as required by the work performed and location the work is being done. In addition, Employees in this position must also be capable of: • Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which may be of varying heights and access parameters., • Standing, stooping, bending, crouching, kneeling, squatting, climbing, crawling, or sitting for long periods of time., • Repetitive movements by feet, shoulders, arms, wrists, hands and back in performance of work., • Climbing stairs, and/or vertical ladders of varying heights., • Working in confined work areas and/or elevated heights., • Lifting objects of minimum of 10lbs, with maximum single-person lift limit of 50lbs, with frequent lifting and carrying., • Adapting to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration., • Visually inspecting equipment and verifying information, often in small print., • Applying sideways/upward/downward pressure to tighten and loosen hardware. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Employment at Southwest Shipyard, LP is on an “at-will” basis. There is no contract of employment between Southwest Shipyard, L.P., and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Only the Owner or President has the authority to modify the at-will relationship, and then only in writing specifically addressed to the employee on this issue and signed by Southwest Shipyard, L.P. Executive. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. EEO Statement Southwest Shipyard, LP is an equal opportunity employer, and all qualified candidates will receive consideration without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or any other characteristic protected by law. Southwest Shipyard, LP participates in the E-Verify Employment Verification Program. Southwest Shipyard, LP is not currently accepting unsolicited resumes from search firms. Regardless of past practice, all resumes submitted by search firms to any employee at Southwest Shipyard, LP, via-email, the Internet or directly to hiring managers at Southwest Shipyard, LP in any form without a valid written agreement in place for that specific position will be deemed the sole property of Southwest Shipyard, LP. As a result, no fee will be paid in the event the candidate is hired by Southwest Shipyard, LP PIbb733e009321-37820-38921774

Reports To: Driver Personnel Manager Duty Days: 238 Days Wage/Hour Status: Non-exempt Pay Grade: A06 Qualifications: College hours, high school diploma or GED Commercial Driver's License (CDL) with appropriate endorsements School Bus Driver Certification or able to obtain with six months of hire date Two years of experience as a public-school bus driver (preferred) Have knowledge of record keeping and office procedures Pass annual physical in accordance with state law Negative result on drug and/or alcohol tests administered as pre-employment, random, post-accident and/or reasonable suspicion basis, in accordance with federal law and district policy Able to read and interpret maps and routes Able to climb in and out of all school bus emergency exits Diplomatic and flexible in dealing with internal/external public Able to work with minimal supervision Able to work under pressure and prioritize tasks effectively High degree of verbal communication skills Primary Purpose: Knowledgeable of the district transportation services department in order to effectively communicate with the public and relate to staff's needs. Direct all movement of buses within the assigned transportation service area. Provide the logistical support effort in providing safe and on time transportation to all students of KISD. Safely drive students to and from school on a schedule assigned by the Transportation Department. Safely transport students and staff to and from district sanctioned activities. Always act in the best interest of the district, the students and the community. Major Duties and Responsibilities: • Record driver/attendant absence calls., • Assign substitute drivers and attendants to cover driver absences., • Monitor and respond to two-way radio communications., • Respond appropriately and decisively to emergency situations (in person, via telephone, 2-way radio)., • Answer and route telephone calls; record and distribute messages in an accurate and timely manner., • Coordinate the tutorial bus routing., • Coordinate the activity trip program., • Assign drivers and buses for activity trips., • Identify and work as needed on non-driving tasks., • Operate any Katy ISD school bus and related equipment in a safe and efficient manner while following all traffic laws, district policies, district regulations and Transportation Department regulations., • Other duties as assigned. Equipment Used Personal computer, copier, calculator, two-way radio, fax machine, telephone Working Conditions: Work with frequent interruptions, maintain emotional control under stress. Work outside and inside, around moving objects, vehicles, and machinery with moving parts. Exposed to heat, dampness and humidity, toxic chemicals, exhaust fumes, gasoline, and diesel fuel. Prolonged driving and sitting. Irregular hours and occasional prolonged hours. The foregoing statements describe the general purpose and responsibilities assigned to this job and are not an exhaustive list of all responsibilities and duties that may be assigned or skills that may be required.

Overview The Enterprise brand of Enterprise Mobility is seeking a responsible, dedicated person to join our team as a DOT certified Automotive Technician located at our George Bush International Airport Service Center. The Automotive Technician performs car service, repair, preventive maintenance, in-fleeting service, and vehicle reconditioning service according to company policy and procedures. This position requires the exercise of reasonable judgment and initiative. Performs all responsibilities with a focus on the needs of our customers and in accordance with our Quality Standards. Multiple positions available! We offer: Paid time off Employee rental car discounts Retirement savings plan including 401k with matching profit sharing Health Insurance Life Insurance Dental Insurance Vision Insurance Training and development Pay: $30.00 /hr with 4 current ASEs (A1-A8) or equivalent OEM certifications +$1 / hr for each additional current ASE Hourly pay - NOT flat rate Extras: $500 annual tool allowance Night Shift Premiums: +$1 / hr starting at 2:00 PM +$2 / hr for hours 10:00 PM-6:00 AM Schedule: Tues-Sat | 6:00 AM-2:30 PM This position is located at: 17326 Pine CutHouston, TX 77032 Enterprise Mobility is a leading provider of mobility solutions, owning and operating the Enterprise Rent-A-Car, National Car Rental and Alamo Rent A Car brands through its integrated global network of independent regional subsidiaries. Enterprise Mobility and its affiliates offer extensive car rental, carsharing, truck rental, fleet management, retail car sales, as well as travel management and other transportation services, to make travel easier and more convenient for customers. Privately held by the Taylor family of St. Louis, Enterprise Mobility together with its affiliate Enterprise Fleet Management manages a diverse fleet of 2.4 million vehicles and accounted for nearly $38 billion in revenue through a network of more than 9,500 fully-staffed neighborhood and airport rental locations in more than 90 countries and territories. Responsibilities We are hiring now for immediate openings. Responsibilities include: Ensure that all repairs and preventative maintenance are completed according to the manufacturers specifications and guidelines. Complete required manufacturer's training and perform warranty and recall repairs. Complete ADA installs as required upon completion of training. Maintain vehicle repair history by documenting a Repair Order to accurately reflect steps taken and part(s) used during the repair. Provide safe and reliable vehicles upon completion of repairs and preventative maintenance. Comply with part and inventory tracking procedures. Utilize multiple manufacturers' websites, software and diagnostic tools. May process new fleet, LOFR, tires, fuel reclamation or buy-backs. Maintain the work area in a safe and clean condition. Requires ability to perform manual labor, such as, bending, kneeling, crouching, lifting, standing, and walking for extended periods of time. Moderate physical activity which requires handling of objects up to 50 pounds with long periods of standing and walking. Perform miscellaneous job-related duties as required. Follow proper procedures to comply with health, safety, and environmental standards. Equal Opportunity Employer/Disability/Veterans Qualifications Two years of mechanical experience in an automotive repair shop servicing current model vehicles required. Must have OEM training/Certification OR 4 current and valid ASE (A1 -A8) certifications. Must have a current and valid driver's license with a good driving record, no more than 2 at-fault accidents or moving violations in the past 3 years (1 of the 2 violations or at-fault accidents must fall off within 12 months of employment). No drug or alcohol related convictions on driving record within the past 5 years (DUI/DWI). Requires previous experience working on light to medium duty trucks. Must be authorized to work in the United States and not require work authorization sponsorship by our company for this position now or in the future. Must be able to complete a pre-employment drug test and will be subject to random drug and alcohol testing. Apart from religious observations, must be able to work one of the following shift/schedule:Tuesday - Saturday 6am-2:30pm. Must be at least 21 years of age and be qualified to drive under DOT regulations. Applicants will be required to submit an appropriate medical examiner's certificate or submit to and successfully complete a DOT medical examination.

Allied Universal, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. Life doesn't always follow a fixed schedule. That's why we created the Security Officer - Part Time Enhanced position: a flexible, dependable option for individuals looking to supplement their income, gain hands-on experience, or work toward a full-time career with the industry leader. As a Security Officer Enhanced Part Time Route Driver in Houston, TX, this role is designed to provide reliable, consistent hours at an assigned site with the flexibility for you to earn more by picking-up additional shifts when it works for you. Pay Rate: $16.00 / Hour Job Schedule: DayTimeFri08:00 AM - 05:00 PM How This Role Works: Fixed-Shift Commitment ("Anchor Shifts'): You will be hired for a designated site and weekly shift that serves as your reliable base schedule. This assignment requires a six (6) month commitment. Earn More, Claim-A-Shift Program: In addition to your fixed shift, you may pick-up extra shifts through our scheduling platform, allowing you to increase earnings and gain experience across multiple sites. Work part-time hours this week and full-time the next. It's all up to you. This role is ideal for candidates seeking part-time employment with flexibility, income stability, and opportunities to build-up to a full-time schedule of up to 40 hours per week; always with the option to scale back when needed. Responsibilities: Provide customer service to employees, visitors, and/or vendors by carrying out security-related procedures, site-specific policies, and when appropriate, emergency response activities at a technology-focused location. Respond to incidents, alarms, and/or critical situations in a calm, problem-solving manner, documenting observations and reporting concerns to site contacts and Allied Universal leadership. Conduct regular and random patrols throughout buildings, work areas, parking areas, and perimeter locations to help to deter unauthorized activity and identify unusual conditions. Monitor access points and help to verify authorized entry for staff, guests, and/or deliveries in accordance with location protocols and visitor management practices. Support day-to-day operations by communicating clearly with site personnel, providing directions and assistance, and completing required logs, reports, and other security-related documentation. Minimum Requirements: Possess at least 2 years of security-related experience. A valid driver's license is required in accordance with Allied Universal driver policy requirements. Be at least 18 years of age for unarmed roles; 21+ years of age for armed roles. Possess a high school diploma or equivalent. As a condition of employment, applicants will be subject to a background investigation in accordance with all federal, state, and local laws. Allied Universal will consider qualified applications with criminal histories in a manner consistent with applicable laws. As a condition of employment, applicants will be subject to a drug screen to the extent permitted by law. Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment. A valid driver's license will be required for driving positions only. Why Join Us: Smart Tools: Access to our exclusive technology to view and claim additional shifts to earn more. Career Growth: Get paid training and access to career growth opportunities. Financial Benefits: Participate in our retirement savings plan to invest in your future. Exclusive Perks: Enjoy discounts on top brands and services through our Perks Program. Allied Universal is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com . If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices. .

Department: Police Salary: Commensurate with Experience/Education Description: Supervises training, coordination and performance of emergency communications operations, including scheduling of personnel for Police and Security dispatch; supplementing and assisting in a Tele communicator role as required. 1. Manages and directs the daily shift operations of the Dispatch Center, evaluates work performance, schedules and coordinates personnel and work activities, and ensures compliance with guidelines and policies. 2. Analyzes data from the crime information system for completeness and accuracy and ensures adherence to local, state and federal telecommunication regulations; maintains professional rapport with all customers; promotes awareness of liability issues as well as oversees organization of reference materials. 3. Monitors and updates all active police and security units on system status display, relays emergency and non-emergency calls for Police and Security departments; prioritizes radio traffic; retrieves, verifies, and disseminates information as requested; monitors teletype messages, sending and responding when necessary. 4. Operates systems to log, enter, and maintain up-to-date records on stolen items, vehicles, missing and wanted individuals, protective orders, etc. into crime information center (TCIC, NCIC, Regional and Harris County) databases; maintains various logs promptly and accurately. 5. Answers and provides verbal instructions, assistance and information for all 9-1-1 and non-emergency Police, and Security callers assessing the nature and type of call, and relaying information for dispatch to field personnel according to standard operating procedures. 6. Monitors police and security radio frequencies, PD Panic alarms, BASIS system alarms and intercoms. Dispatches appropriate assistance when needed, and prepares telephone and security radio frequencies to satisfy subpoenas and records requests. 7. Performs random weekly audits of all telecommunicator calls for adherence to policy, procedures, and providing good customer service. Provides mentoring, a coaching opportunity. 8. Assists section supervisor with writing and updating policies and procedures concerning dispatch duties, responsibilities and protocols. 9. Organizes, instructs and directs on-the-job training for new dispatch employees. 10. Ensure CCH's for department applicants are completed, reviewed, and submitted timely to requestors. 11. Acts as agency TLETS Coordinator, CGIS Coordinator, TCIC Terminal Agency Coordinator. 12. Performs other job-related duties as assigned. MQ: Requires the ability and knowledge for analysis and interpretation of procedures, policies and practices attainable through specific education and/or training programs in a specialty or technical field. Advanced vocational or electronic skills or a basic knowledge of a profession field is required. An Associate's degree or certification/licensing in a technical specialty program of over 18 months and up to 3 years duration are characteristics of this field. Requires a minimum of five (5) year of directly job-related experience. Preferred: 3+ years Supervisory experience. Certification/Licensing: Requires professional licensing, certification or registration directly related to the job. TCOLE Telecommunicators License required. A valid, active TCOLE Basic Peace Officer Certification with up-to-date annual TCOLE training. All positions at the University of Houston-System are security sensitive and will require a criminal history check. The University of Houston System and its universities are Equal Opportunity Institutions. Everyone is encouraged to apply.

Summary The Aircrew Program Manager (APM) is responsible for the adequacy of aircrew ground and flight training/testing and standards for specific aircraft of an assigned air carrier. The APM manages programs on assigned aircraft including designated examiners and/or Aircrew Program Designees (APD). Learn more about this agency Summary The Aircrew Program Manager (APM) is responsible for the adequacy of aircrew ground and flight training/testing and standards for specific aircraft of an assigned air carrier. The APM manages programs on assigned aircraft including designated examiners and/or Aircrew Program Designees (APD). Learn more about this agency Overview Help Accepting applications Posted today · Apply by 06/17/26 Due by 11:59 p.m. ET on June 17, 2026 Location Watkins, CO Hapeville, GA Houston, TX No matching locations found. Work site options Telework eligible Yes-Situational telework may be permitted in accordance with agency policy. Relocation expenses reimbursed No Salary $107,446 - $139,684 per year Salary above is basic pay. Locality rate added based on location. Pay scale & grade FG 14 Learn more about pay scale and grade Pay scale and grade determines the salary of the job. Work schedule Full-time Travel Required 50% or less - The job may require up to 50% travel. Appointment type Permanent Occupations and job series 1825 Aviation Safety Supervisory status No Federal service type This job is in the Excepted Service Represented by a union Yes - This position is represented by PASS: Flight Standards Services. Drug test Yes Security clearance Other Announcement number AEA-FS-26-SLF-98914 Control number 870683400 This job is open to Help Internal to an agency Current federal employees of the hiring agency that posted the job announcement. Clarification from the agency Open to current permanent FAA employees; FAA-Wide Duties Help Flight Oversight ASIs do not conduct certification (pilot evaluating, testing, and checking) job functions as a required crewmember, including safety pilot. The incumbent will not, in any scenario, act as a required crewmember or safety pilot of an aircraft. Flight Oversight ASIs apply a broad knowledge of the aviation industry, aviation safety, and Federal aviation laws, regulations, and policies. Develops a work program to ensure periodic surveillance of designated pilot and flight engineer examiners, pilot and flight engineer check airmen, and company training programs. Assures the assigned air carrier conducts flight crew training and testing required by appropriate Title 14 of the Code of Federal Regulations (14 CFR), FAA-approved training programs, and current testing standards. Oversees company check airmen and APDs. Serves as the technical advisor to the Principal Inspector on assigned areas of the company's training and testing programs. Coordinates technical instructions, policy orders, and procedures through the Principal Inspector to assure uniformity of training and testing activities. Responsible for conducting enforcement investigations and preparation of final reports and recommendations on disposition. Performs or supervises the emergency suspension of certificates or cancellation of flight oversight specifications. Conducts or directs the reexamination of certificated airmen or recertification of an operator or agency. Conducts investigations of public complaints, congressional inquiries, and aircraft incidents and accidents. Provides verbal and/or written technical assistance to legal counsel, testifies at court trials and formal hearings, and gives dispositions. Coordinates with geographic inspectors for the accomplishment of non-routine air carrier surveillance. Recommends the designation of APDs and pilot examiners. Responsible for the conduct of flight tests, additional type ratings, and flight engineer certification; proficiency tests; initial qualification tests, and line-oriented flight training. Assures standardization of check airmen and designated examiners and recommends to the POI any changes which are considered necessary. Monitors assigned areas of the flight crew training program and associated records to ensure compliance with pertinent 14 CFR, national and regional directives, and safe operating practices. Monitors assigned air carrier ground and flight training. Attends certificate holder's company and safety meetings. Evaluates training programs to ensure they meet the requirements of 14 CFR. Approves or disapproves training programs including flight simulators, training devices, or other equipment used in these programs. May require amendments to previously approved manuals to correct any conflict with regulatory requirements; eliminate unsafe practices; and/or improve the specificity of instruction. Performs other duties as assigned. Requirements Help Conditions of employment US Citizenship is required. Selective Service Registration is required for males born after 12/31/1959. Must submit an SF50 (See Required Documents). Designated or Random Drug Testing required. This position requires frequent travel. Valid state driver's license is required. Qualifications General Requirements for All Positions: Not more than two separate incidents involving Federal aviation regulations violations in the last 5 years; Valid State driver's license; Fluency in the English language; No chemical dependencies or drug abuse that could interfere with job performance; and High school diploma or equivalent. Medical Requirements for All Positions: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, and must meet all of the following requirements: Have good distant vision in each eye and be able to read printed materials the size of typewritten characters (glasses and contact lenses permitted) without strain; Have the ability to hear the conversational voice (hearing aid permitted); Not have any physical condition that would cause them to be a hazard to themselves or others or that would interfere with their ability to fly as passengers in a variety of aircraft. In addition, applicants for positions that require participation in the operation of aircraft must: Possess a valid second-class medical certificate in accordance with Federal Aviation Agency (FAA) regulations; and Pass recurrent medical examinations as prescribed by the FAA. Applicants not requiring valid second-class medical certificates who are tentatively selected will be required to: Provide documentation from a board-certified physician certifying that they meet the minimal medical requirements; or Individuals who do not meet the minimum medical requirements but who are otherwise qualified will receive an individualized assessment to determine whether they can perform the essential functions of the position. Applicants for Aviation Safety Inspector, (Flight Oversight) positions must meet all of the following requirements. At least 1 year of pilot experience in multi-engine aircraft of more than 12,500 pounds maximum certificated takeoff weight. Not more than 2 flying accidents during the last 5 years in which the applicant's pilot error was involved. Three years of experience working in an organization with an air carrier, commercial operator, or air agency certificate, an organization whose work led to the certification of individual airmen, or an organization that operated aircraft. At least one year of this experience must be with an organization that also operated multi-engine aircraft of more than 12,500 pounds maximum takeoff weight. Airline Transport Pilot Certificate Minimum 1,500 total flight hours. NOTE: Recency of specialized experience is waived for current FAA employees in the 1825 series. To qualify for this position you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV-I, FG/GS-13 grade level. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position. Specialized experience must demonstrate: Provide guidance in the development of required operations manuals and record keeping systems; analyze reports to insure compliance with operations programs. Conduct enforcement investigations and preparation of final reports and recommendations on dispositions. Education Not applicable. Preview job questionnaire Make sure your resume includes detailed information to support your qualifications and answers to the job questionnaire. Additional information We may use this vacancy to fill other similar vacant positions. Position may be subject to a background investigation. A one-year probationary period may be required. The person selected for this position may be required to file a financial disclosure statement within 30 days of entry on duty. FAA policy limits certain outside employment and financial investments in aviation-related companies. www.faa.gov/jobs/workinghere/financial-disclosure-requirements This position is covered by the Department of Transportation's Drug and Alcohol Testing Program. Any applicant tentatively selected for this position will be subject to pre-employment or pre-appointment drug screening. Persons occupying a "testing designated position (TDP)" will be subject to random drug and/or alcohol testing. Duty Location: Selectee will be required to report to an FAA Flight Standards Facility Duty Location where selection is made. Situational telework may be permitted in accordance with agency policy. As a part of the Federal-Wide Hiring Reform Initiative (streamlining the hiring process), the FAA is committed to eliminating the use of the Knowledge, Skills and Ability (KSA) narratives from the initial application in the hiring process for all announcements. Therefore, as an applicant for this announcement, you are NOT required to provide a narrative response in the text box listed below each KSA. In lieu of providing a KSA narrative response in the text box listed below each KSA in your work history, please include information that provides specific examples of how you meet the response level or answer you chose for each KSA. Your work history examples should be specific and clearly reflect the highest level of ability. Your KSA answers will be evaluated further to validate whether the level that you selected is appropriate based on the work history and experience you provided. Your answers may be adjusted by a Human Resource Specialist as appropriate. Eligible applicants meeting the minimum qualification requirements and selective factor(s), if applicable, may be further evaluated on the Knowledge, Skills and Abilities (KSA) listed in the announcement. Based on this evaluation, applicants will be placed in one of the following categories: score order, category grouping, or alphabetical and referred to the selecting official for consideration. Please ensure you answer all questions and follow all instructions carefully. Errors or omissions may impact your rating or may result in you not being considered for the job. Qualification requirements must be met by the closing date of this vacancy announcement. Applicants may be asked to verify information on your application for employment with the FAA. Work history must state job titles including specialty, series and grade level held. No references will be made from your Personnel File, so information must be current and up to date. Ingrade/downgrade applications will be accepted. Links to Important Information: Locality Pay, COLA Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. How you will be evaluated You will be evaluated for this job based on how well you meet the qualifications above. IMPORTANT: Applicants may be rated on the extent and quality of experience, education, and training relevant to the duties of the position(s). All answers provided in the on-line process must be substantiated. Ensure that your application package/resume supports your responses. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. Required documents Required Documents Help If you need to submit additional documents to supplement your on-line application, e.g. transcripts, SF-50, or veterans' documentation, you may upload these documents with your application in USAJOBS. Supplemental documentation can also be faxed to (718) 995-5688 on or before the closing date of this announcement. Please include your name and the vacancy announcement number on each of your faxed pages and redact all Personally Identifiable Information (PII), such as social security number and date of birth. If you are an FAA employee, you MUST provide a copy of your SF-50 (Notification of Personnel Action) containing information in Blocks 15, 17, 18, 19, 22, and 24 so it can be used to verify your position title, series, grade, tenure, and organization of record by the closing date of the announcement. You may fax your SF-50 or upload it into the on-line application. If faxing the SF-50, please ensure you include the vacancy announcement number on the faxed copy. If you are an FAA employee, you can access and print your SF-50 from the eOPF system https://eopf.opm.gov/dot/. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

DSV - Global transport and logistics In 1976, ten independent hauliers joined forces and founded DSV in Denmark. Since then, DSV has evolved to become the world's 3rd largest supplier of global solutions within transport and logistics. Today, we add value to our customers' entire supply chain by transporting, storing, packaging, re-packaging, processing and clearing all types of goods. We work every day from our many offices in more than 80 countries to ensure a steady supply of goods to production lines, outlets, stores and consumers all over the world. Our reach is global yet our presence is local and close to our customers. Read more at www.dsv.com Location: USA - Houston, 831 Division: Road Transport, US Job Posting Title: Driver, Regional Intermodal Time Type: Full Time Summary The regional drayage driver completes regional over-the-road container deliveries with consistent home time, prioritizing safety, efficiency, and professionalism. Benefits of Driving with DSV Drivers start at $0.60 - $0.66 CPM based on experience. Medical, Dental, and Vision insurance (eligible on the first of the month following 30 days of employment). Company paid short-term & long-term disability and life insurance. 401K plan with up to 5% company match. Generous PTO package - including vacation, sick time, birthday holiday, and 6 paid holidays a year. Bi-weekly pay with Daily Pay options. $1,000 Referral Bonus Program. Cell phone allowance. Paid orientation including transportation, lodging, and meals. ESSENTIAL DUTIES AND RESPONSIBILITIES Operates semi-tractor trailers on regional over-the-road drayage routes. Drives in compliance with Hours of Service regulations, operating up to 11 hours following a minimum of 10 consecutive hours off duty. Performs local pickup and delivery (P&D) as assigned. Backs trailers safely and accurately to customer docks, ports, rail yards, and designated locations. Maintains full compliance with all Federal, State, and DOT safety regulations, demonstrating safe and professional driving behavior at all times. Communicates professionally, courteously, and effectively with customers, dispatchers, and company representatives. Coordinates loads, schedules, and routing with dispatch to ensure timely and efficient deliveries. Secures containerized and/or palletized freight properly, ensuring correct arrangement and balance of cargo. Conducts pre-trip and post-trip inspections and ensures mechanical issues are addressed prior to vehicle operation. Complies with all DOT requirements, including participation in random and reasonable-suspicion drug and alcohol testing programs. Performs additional duties as assigned. Qualifications & Work Experience CDL A License Required Current TWIC card required A minimum of 2 years CDL A driving experience within the last 4 years. 3+ years CDL A driving experience preferred. Meet D.O.T. qualification requirements, FMCSR 391.41. Experience in load securement, route planning, and navigating various road conditions. Exceptional customer service skills and the ability to handle sensitive cargo with care. Detail-oriented / mindset required. PHYSICAL DEMANDS While performing the duties of a truck driver, the employee is required to sit for extended periods while operating a commercial vehicle. The employee must use hands and fingers to operate a steering wheel, controls, GPS devices, and other on-board equipment. The role also requires the ability to reach with hands and arms, climb in and out of the cab and trailer, and occasionally stoop, kneel, bend, or crouch during inspections, coupling/uncoupling, or loading/unloading activities. The employee must be able to communicate effectively using verbal and hearing skills, often via CB radio or mobile devices. Vision requirements include the ability to see at a distance for safe driving, as well as close vision for reading documents, using electronic logs, and performing inspections. Physically able with or without accommodation to: Frequently carry, push, or pull freight weighing 1-125 pounds Lifts up to 50 pounds Frequently reach for freight at waist level and occasionally above shoulder height or below waist level Shift manual transmission and operate foot pedals, not applicable on all trucks Frequently squat or crouch to handle and position freight Climb in and out of over-the-road tractor, 4 to 6 feet, 8 to 10 times daily with assistance of various steps and handholds; occasionally bending, twisting, climbing, squatting, crouching and balancing. Conduct pre-trip inspection for a tractor and trailer. Be able to hook/unhook various commercial vehicle combinations, manually lower/raise landing gear, operate the fifth wheel release level, lock/release pintle-hooks, fuel vehicles and check engine oil/coolant levels, perform preventative maintenance. Must be able to spend at least 5% of day standing and 5% of the day walking on surfaces such as wood, metal and concrete. Surface may sometimes be slippery or wet. * Must be able to reach above shoulder level, at waist level and below waist level for maneuvering and directing the controls to operate the truck. WORK ENVIRONMENT While performing the duties of a driver, the employee may be exposed to diesel fumes, airborne particles, and occasionally harsh weather conditions while loading or unloading. The work environment includes time spent both inside the truck cab-which may involve extended periods of sitting and exposure to engine noise and vibration-and outside at customer sites, terminals, or on public roadways. Noise levels can vary from quiet inside the cab to moderate or loud at delivery or pick-up locations. For this position, the expected base pay range is $.48 - $.66 /Mile. Actual compensation will be determined based on job-related factors such as relevant experience, skills, education, certifications, and geographic location, in accordance with applicable laws and company policy. DSV provides a comprehensive package of health benefits including: medical, prescription, dental, vision, and life insurance, along with flexible and health spending accounts, short and long-term disability coverage, and wellness resources to support your overall well-being. In addition, our 401(k) plan offers company-matching contributions up to 5% to help you build a secure financial future. To support a healthy work-life balance, DSV also offers generous paid time off, paid holidays, and additional floating holidays. Information regarding DSV's benefits offerings, including eligibility, coverage options, and plan details, is available through the DSV Benefits Showcase. Benefits, programs, and eligibility may vary by location and division in accordance with applicable state and local laws. DSV does not accept unsolicited agency resumes. Please do not forward unsolicited resumes to our website, employees, or Human Resources. DSV will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of DSV and will be processed accordingly without fees. DSV is an equal employment opportunity employer. Candidates are considered for employment without regard to race, creed, color, national origin, age, sex, religion, ancestry, disability, veteran status, marital status, gender identity, sexual orientation, national origin, or any other characteristic protected by applicable federal, state or local law. If you require special assistance or accommodation while seeking employment with DSV, please contact Human Resources at hr@us.dsv.com. If you are interested in learning the status of your application, please note you will be contacted directly by the appropriate human resources contact person if you are selected for further consideration. DSV reserves the right to defer or close a vacancy at any time. DSV - Global transport and logistics Working at DSV means playing in a different league. As a global leader in transport and logistics, we have been on an extraordinary journey of growth. Let's grow together as we continue to innovate, digitalise and build on our achievements. With close to 150,000 colleagues in over 90 countries, we work every day to offer solid services and meet our customers' needs and help them achieve their goals. We know that the best way to achieve this is by bringing in new talent, fresh perspectives and ambitious individuals like you. At DSV, performance is in our DNA. We don't just work - we aim to shape the future of logistics. This ambition fuels a dynamic environment built on collaboration with world-class team players, accountability and action. We value inclusivity, embrace different cultures and respect the dignity and rights of every individual. If you want to make an impact, be trusted by customers and grow your career in a forward-thinking company - this is the place to be. Start here. Go anywhere Visit dsv.com and follow us on LinkedIn and Facebook. open/close Print Share on Twitter Share on LinkedIn Send by email

DSV - Global transport and logistics In 1976, ten independent hauliers joined forces and founded DSV in Denmark. Since then, DSV has evolved to become the world's 3rd largest supplier of global solutions within transport and logistics. Today, we add value to our customers' entire supply chain by transporting, storing, packaging, re-packaging, processing and clearing all types of goods. We work every day from our many offices in more than 80 countries to ensure a steady supply of goods to production lines, outlets, stores and consumers all over the world. Our reach is global yet our presence is local and close to our customers. Read more at www.dsv.com Location: USA - Houston, 831 Division: Road Transport, US Job Posting Title: Driver, Regional Intermodal Time Type: Full Time Summary The regional drayage driver completes regional over-the-road container deliveries with consistent home time, prioritizing safety, efficiency, and professionalism. Benefits of Driving with DSV • Drivers start at $0.60 - $0.66 CPM based on experience., • Medical, Dental, and Vision insurance (eligible on the first of the month following 30 days of employment)., • Company paid short-term & long-term disability and life insurance., • 401K plan with up to 5% company match., • Generous PTO package - including vacation, sick time, birthday holiday, and 6 paid holidays a year., • Bi-weekly pay with Daily Pay options., • $1,000 Referral Bonus Program., • Cell phone allowance., • Paid orientation including transportation, lodging, and meals. ESSENTIAL DUTIES AND RESPONSIBILITIES • Operates semi-tractor trailers on regional over-the-road drayage routes., • Drives in compliance with Hours of Service regulations, operating up to 11 hours following a minimum of 10 consecutive hours off duty., • Performs local pickup and delivery (P&D) as assigned., • Backs trailers safely and accurately to customer docks, ports, rail yards, and designated locations., • Maintains full compliance with all Federal, State, and DOT safety regulations, demonstrating safe and professional driving behavior at all times., • Communicates professionally, courteously, and effectively with customers, dispatchers, and company representatives., • Coordinates loads, schedules, and routing with dispatch to ensure timely and efficient deliveries., • Secures containerized and/or palletized freight properly, ensuring correct arrangement and balance of cargo., • Conducts pre-trip and post-trip inspections and ensures mechanical issues are addressed prior to vehicle operation., • Complies with all DOT requirements, including participation in random and reasonable-suspicion drug and alcohol testing programs., • Performs additional duties as assigned. Qualifications & Work Experience • CDL A License Required, • Current TWIC card required, • A minimum of 2 years CDL A driving experience within the last 4 years. 3+ years CDL A driving experience preferred., • Meet D.O.T. qualification requirements, FMCSR 391.41., • Experience in load securement, route planning, and navigating various road conditions., • Exceptional customer service skills and the ability to handle sensitive cargo with care., • Detail-oriented / mindset required. PHYSICAL DEMANDS While performing the duties of a truck driver, the employee is required to sit for extended periods while operating a commercial vehicle. The employee must use hands and fingers to operate a steering wheel, controls, GPS devices, and other on-board equipment. The role also requires the ability to reach with hands and arms, climb in and out of the cab and trailer, and occasionally stoop, kneel, bend, or crouch during inspections, coupling/uncoupling, or loading/unloading activities. The employee must be able to communicate effectively using verbal and hearing skills, often via CB radio or mobile devices. Vision requirements include the ability to see at a distance for safe driving, as well as close vision for reading documents, using electronic logs, and performing inspections. Physically able with or without accommodation to: • Frequently carry, push, or pull freight weighing 1-125 pounds, • Lifts up to 50 pounds, • Frequently reach for freight at waist level and occasionally above shoulder height or below waist level, • Shift manual transmission and operate foot pedals, not applicable on all trucks, • Frequently squat or crouch to handle and position freight, • Climb in and out of over-the-road tractor, 4 to 6 feet, 8 to 10 times daily with assistance of various steps and handholds; occasionally bending, twisting, climbing, squatting, crouching and balancing., • Conduct pre-trip inspection for a tractor and trailer., • Be able to hook/unhook various commercial vehicle combinations, manually lower/raise landing gear, operate the fifth wheel release level, lock/release pintle-hooks, fuel vehicles and check engine oil/coolant levels, perform preventative maintenance., • Must be able to spend at least 5% of day standing and 5% of the day walking on surfaces such as wood, metal and concrete. Surface may sometimes be slippery or wet., • Must be able to reach above shoulder level, at waist level and below waist level for maneuvering and directing the controls to operate the truck. WORK ENVIRONMENT While performing the duties of a driver, the employee may be exposed to diesel fumes, airborne particles, and occasionally harsh weather conditions while loading or unloading. The work environment includes time spent both inside the truck cab-which may involve extended periods of sitting and exposure to engine noise and vibration-and outside at customer sites, terminals, or on public roadways. Noise levels can vary from quiet inside the cab to moderate or loud at delivery or pick-up locations. For this position, the expected base pay range is $.48 - $.66 /Mile. Actual compensation will be determined based on job-related factors such as relevant experience, skills, education, certifications, and geographic location, in accordance with applicable laws and company policy. DSV provides a comprehensive package of health benefits including: medical, prescription, dental, vision, and life insurance, along with flexible and health spending accounts, short and long-term disability coverage, and wellness resources to support your overall well-being. In addition, our 401(k) plan offers company-matching contributions up to 5% to help you build a secure financial future. To support a healthy work-life balance, DSV also offers generous paid time off, paid holidays, and additional floating holidays. Information regarding DSV's benefits offerings, including eligibility, coverage options, and plan details, is available through the DSV Benefits Showcase. Benefits, programs, and eligibility may vary by location and division in accordance with applicable state and local laws. DSV does not accept unsolicited agency resumes. Please do not forward unsolicited resumes to our website, employees, or Human Resources. DSV will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of DSV and will be processed accordingly without fees. DSV is an equal employment opportunity employer. Candidates are considered for employment without regard to race, creed, color, national origin, age, sex, religion, ancestry, disability, veteran status, marital status, gender identity, sexual orientation, national origin, or any other characteristic protected by applicable federal, state or local law. If you require special assistance or accommodation while seeking employment with DSV, please contact Human Resources at hr@us.dsv.com. If you are interested in learning the status of your application, please note you will be contacted directly by the appropriate human resources contact person if you are selected for further consideration. DSV reserves the right to defer or close a vacancy at any time. DSV - Global transport and logistics Working at DSV means playing in a different league. As a global leader in transport and logistics, we have been on an extraordinary journey of growth. Let's grow together as we continue to innovate, digitalise and build on our achievements. With close to 150,000 colleagues in over 90 countries, we work every day to offer solid services and meet our customers' needs and help them achieve their goals. We know that the best way to achieve this is by bringing in new talent, fresh perspectives and ambitious individuals like you. At DSV, performance is in our DNA. We don't just work - we aim to shape the future of logistics. This ambition fuels a dynamic environment built on collaboration with world-class team players, accountability and action. We value inclusivity, embrace different cultures and respect the dignity and rights of every individual. If you want to make an impact, be trusted by customers and grow your career in a forward-thinking company - this is the place to be. Start here. Go anywhere Visit dsv.com and follow us on LinkedIn and Facebook. open/close Print Share on Twitter Share on LinkedIn Send by email Driver, Regional Intermodal Houston

Allied Universal®, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. Life doesn't always follow a fixed schedule. That's why we created the Security Officer - Part Time Enhanced position: a flexible, dependable option for individuals looking to supplement their income, gain hands-on experience, or work toward a full-time career with the industry leader. As a Security Officer Enhanced Part Time Route Driver in Houston, TX , this role is designed to provide reliable, consistent hours at an assigned site with the flexibility for you to earn more by picking-up additional shifts when it works for you. Pay Rate: $16.00 / Hour Job Schedule: DayTimeFri08:00 AM - 05:00 PM How This Role Works: + Fixed-Shift Commitment ("Anchor Shifts"): You will be hired for a designated site and weekly shift that serves as your reliable base schedule. This assignment requires a six (6) month commitment. + Earn More, Claim-A-Shift Program: In addition to your fixed shift, you may pick-up extra shifts through our scheduling platform, allowing you to increase earnings and gain experience across multiple sites. Work part-time hours this week and full-time the next. It's all up to you. This role is ideal for candidates seeking part-time employment with flexibility, income stability, and opportunities to build-up to a full-time schedule of up to 40 hours per week; always with the option to scale back when needed. Responsibilities: + Provide customer service to employees, visitors, and/or vendors by carrying out security-related procedures, site-specific policies, and when appropriate, emergency response activities at a technology-focused location. + Respond to incidents, alarms, and/or critical situations in a calm, problem-solving manner, documenting observations and reporting concerns to site contacts and Allied Universal leadership. + Conduct regular and random patrols throughout buildings, work areas, parking areas, and perimeter locations to help to deter unauthorized activity and identify unusual conditions. + Monitor access points and help to verify authorized entry for staff, guests, and/or deliveries in accordance with location protocols and visitor management practices. + Support day-to-day operations by communicating clearly with site personnel, providing directions and assistance, and completing required logs, reports, and other security-related documentation. Minimum Requirements: + Possess at least 2 years of security-related experience. + A valid driver's license is required in accordance with Allied Universal driver policy requirements. + Be at least 18 years of age for unarmed roles; 21+ years of age for armed roles. + Possess a high school diploma or equivalent. + As a condition of employment, applicants will be subject to a background investigation in accordance with all federal, state, and local laws. + Allied Universal will consider qualified applications with criminal histories in a manner consistent with applicable laws. + As a condition of employment, applicants will be subject to a drug screen to the extent permitted by law. + Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment. + A valid driver's license will be required for driving positions only. Why Join Us: + Smart Tools: Access to our exclusive technology to view and claim additional shifts to earn more. + Career Growth: Get paid training and access to career growth opportunities. + Financial Benefits: Participate in our retirement savings plan to invest in your future. + Exclusive Perks: Enjoy discounts on top brands and services through our Perks Program. Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com . If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices . . Job ID: 2026-1599910 Location: United States-Texas-Houston Job Category: Security Officer, Part Time Security

Applications accepted from: All Person Interested Service Line/Section: Engineering & Construction/Infrastructure Rehabilitation Reporting Location: 611 Walker Street; Houston, Tx. Workdays & Hours: M-F, 8 a.m. - 5 p.m. Subject to change DESCRIPTION OF DUTIES/ESSENTIAL FUNCTIONS GENERAL SUMMARY Perform inspections of public infrastructure for various civil construction projects (i.e. paving, water, wastewater lines and facilities, storm sewers and traffic signals) to ensure conformance to project specifications and contract documents. RESPONSIBILITIES Reviews drawings and specifications for a variety of municipal projects. Inspect various civil constructions sites to ensure compliance with technical specifications and contract documents. Records and submits all daily construction activities on reports and drawings, which include full and specific details on progress, plan modifications, equipment's usage, materials, labor, etc. Attached photographs to reports. Verifies materials used are in accordance with project specifications. Ensure contractor has properly notified residents of construction in the area. Responds to inquiries from the general public, civic groups, contractors, technical professionals and businesses. WORKING CONDITIONS The position routinely requires lifting of moderately heavy items (up to 40 pounds) and/or very long periods of walking on rough surfaces. There are routine discomforts from exposure to moderate heat, cold, moisture /wetness and unpleasant air conditions. This position may involve routine exposure to soiled materials and light chemical substance such as cleaning solutions. This is a Houston Public Works Emergency Management position at the Tier III Level.EDUCATIONAL REQUIREMENTS Requires a high school diploma or a GED certificate. EXPERIENCE REQUIREMENTS Five (5) years of skilled experience related to construction are required. Substitution: A Bachelor's degree in Construction Management or a related field may substitute for up to four years of the experience requirement. Vocational training and education may be substituted on a year-for-year basis for up to four years of the experience requirement. LICENSE REQUIREMENTS Requires certification as a Certified Public Infrastructure Inspector (CPII) by the American Public Works Association or an industry-recognized equivalent certification within the first year of employment in the job. Preferred: Certificates of completion in one (1) or more fields of expertise (i.e. concrete, electrical, etc.) offered by any public or private agency (i.e. Department of Transportations) or other independent provider. Must have valid Texas Driver's License and compliance with the City of Houston's policy on driving (A.P. 2-2). Preference shall be given to eligible veteran applicants provided such persons possess the qualifications necessary for competent discharge of the duties involved in the position applied for, such persons are among the most qualified candidates for the position, and all other factors in accordance with Executive Order 1-6. SELECTION/SKILLS TESTS REQUIRED: None However, the department may administer a skills assessment test. SAFETY IMPACT POSITION: Yes If yes, this position is subject to random drug testing and if a promotional position, candidate must pass an assignment drug test. SALARY INFORMATION Factors used in determining the salary offered include the candidate's qualifications as well as the pay rates of other employees in this classification. PAY GRADE: 19 APPLICATION PROCEDURES Only online applications will be accepted for this City of Houston job and must be received by the Human Resources Department during active posting period. Applications must be submitted online at: www.houstontx.gov. To view your detailed application status, please log-in to your online profile by visiting: http://agency.governmentjobs.com/houston/default.cfm or call 832-393-6015. If you need special services or accommodations 832-393-6015 (TTY 7-1-1) If you need login assistance or technical support call 855-524-5627. Due to the high volume of applications received, the Hiring Department will contact you directly, should you be selected to advance in our recruitment process. All new and rehires must pass a pre-employment drug test and are subject to a physical examination and verification of information provided. EOE Equal Opportunity Employer The City of Houston is committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, genetic information, veteran status, gender identity, or pregnancy.

Company Description Shelton Trucking, a PS Logistics company, is a flatbed trucking operation with a fleet of over 300 trucks. Our corporate office is located in Altha, FL, with additional terminals in Jacksonville, FL and Saraland, AL. We pride ourselves on our commitment to excellent customer service, and we offer local representatives to service our customers' transportation needs. Our dedication, reliability and commitment to excellence means you can always trust Shelton Trucking to be the best value for your bottom line. Shelton Trucking joined PS Logistics in 2018, which means we have been able to maintain our small business culture while gaining access to the resources of a larger corporation. Our customers and drivers will continue to receive the personalized attention they have come to expect from us, while also benefiting from the expanded capabilities and resources that come with being part of the PS Logistics family. We're committed to continuing our tradition of providing safe, reliable and timely transportation services. Job Description We are looking for a Driver Manager to manage the daily activity of our driver personnel. If you are looking for a career that gives you the opportunity to be a GREAT manager for our GREAT fleet, this is the perfect job for you! Essential Duties and Responsibilities, include but are not limited to: • Communicate ETAs with load planners, • Utilize McLeod, which is our operating software, to assign work to drivers all over the country, • Direct the daily activities of drivers to designated territories or dedicated operations in accordance with company policies, procedures, and business objectives, • Providing drivers with guidance on complying with any applicable local, state and federal statutes regulating the trucking industry., • Ensure that drivers are safe, productive, and deliver on-time to our customers., • Counseling drivers and assisting them with over the road issues, • Assist drivers with keeping important documents up to date such as driver's license renewal, random drug tests and physicals Qualifications • Degree in Logistics, Supply Chain, or any related field or 1-3 years of experience in dispatch or fleet management, • Bilingual in both English and Spanish (Favorable), • Proficient experience with truck dispatch software, • Flatbed Experience a plus, • Microsoft Office knowledge, • Excellent written and oral communication skills, • Must be detail oriented and have a great interpersonal skills Additional Information This position is Monday-Friday 7am-5pm. As a full-time employee, you are eligible for all benefits, including Health. To view a list of our benefits, please visit our website http://www.pstrans.com/ This job is a salary position with no guarantees for career progression. This does not mean that you will not be considered for other positions or opportunities. PS Logistics complies with all applicable equal employment laws, including the Americans with Disabilities Act. Qualified individuals with a disability may request reasonable accommodation from the company.

APPLICATIONS ACCEPTED FROM: ALL PERSONS INTERESTED DIVISION: TRANSPORTATION & DRAINAGE OPERATIONS REPORTING LOCATION: 2200 PATTERSON WORKDAYS & HOURS: MONDAY - FRIDAY 8AM - 5PM Subject to change ABOUT HOUSTON PUBLIC WORKS Houston Public Works (HPW) plays a vital role in ensuring a thriving and sustainable future for our city. We oversee the planning, operation, maintenance, construction management, and technical engineering of the City's public infrastructure, including our roadways, bridges, drainage systems, and parks. With a dedicated workforce of approximately 3,900 employees, we are constantly striving for excellence in delivering essential services to our community. DESCRIPTION OF DUTIES/ ESSENTIAL FUNCTIONS Under the direction of the Deputy Director of Transportation & Drainage Operations, the Senior Assistant Director will direct the efficient management of the Traffic Operations branch. This position provides executive leadership, strategic direction, and operational oversight for the City of Houston's traffic management, maintenance and operations systems. This role is responsible for planning, designing, operating, and maintaining a safe, efficient, and resilient transportation network that supports mobility, safety, economic vitality, and quality of life for residents, businesses, and visitors. The Senior Assistant Director leads multidisciplinary teams responsible for traffic signal operations, intelligent transportation systems (ITS), traffic engineering, street lighting, pavement markings, signage, and special event management. Example of duties: Directs the operation and maintenance of approximately 2,500 traffic signals and 1,400 school zone flashers, prioritizing public safety and efficient traffic flow Establishes performance metrics, operational standards, and service level targets for traffic systems Lead long-term planning for modernization of traffic control infrastructure, ITS expansion, and smart mobility initiatives Champions the adoption and integration of innovative transportation solutions, making strategic recommendations for their implementation to enhance Houston's traffic systems Oversees traffic signal timing, re-timing programs, adaptive signal systems, and corridor optimization Develops and implements long-term transportation strategies to reduce congestion and improve infrastructure Develops and implements citywide traffic operations strategies aligned with Houston's transportation, safety, and mobility goals Implements proactive congestion management, event traffic planning, and special operations for emergencies and major events Collaborates with TxDOT, METRO, Harris County, emergency responders, regional planning organizations, and partner agencies Supports public outreach, responds to community concerns, and communicates traffic impacts and improvements Champions the adoption of emerging technologies such as connected vehicles, AI-based analytics, adaptive control, and smart infrastructure Promotes workforce development, succession planning, and continuous professional training Provides executive leadership during emergency weather events WORKING CONDITIONS The position is physically comfortable, the individual has discretion about walking, standing, etc. There are no major sources of discomfort, i.e., essentially normal office environment with acceptable lighting, temperature and air conditions. This is a Department of Houston Public Works Emergency Management position at the Tier I Level. EDUCATION REQUIREMENTS Requires a thorough understanding of both theoretical and practical aspects of an analytical, technical or professional discipline; or the basic knowledge of more than one professional discipline. Knowledge of the discipline would normally be obtained through a formal 4-year degree from a college or university and a professional certification/licensing is required. Directly related professional experience may be substituted for the education requirement on a year-for-year basis. EXPERIENCE REQUIREMENTS More than ten years of experience is required. Directly related professional experience may be substituted for the education requirement on a year-for-year basis. LICENSE REQUIREMENTS Valid driver's license and compliance with the City of Houston driving policy (A.P. 2-2).Preference will be given to candidates who possess: An active Professional Engineer (PE) license and Professional Traffic Operations Engineer (PTOE) certification. Demonstrates ability to manage traffic operations in high-growth, high-congestion urban environments with diverse multi modal needs. * Strong communication skills with the ability to clearly convey technical information to executive leadership, elected officials, and the public. Preference shall be given to eligible veteran applicants provided such persons possess the qualifications necessary for competent discharge of the duties involved in the position applied for, such persons are among the most qualified candidates for the position, and all other factors in accordance with Executive Order 1-6.SELECTION / SKILLS TESTS REQUIRED Department may administer skills assessment test. SAFETY IMPACT POSITION Yes If yes, this position is subject to random drug testing and if a promotional position, candidate must pass an assignment drug test. SALARY INFORMATION Factors used in determining the salary offered include the candidate's qualifications as well as the pay rates of other employees in this classification. PAY GRADE 34 APPLICATION PROCEDURES Only online applications will be accepted for this City of Houston job and must be received by the Human Resources Department during active posting period. Applications must be submitted online at: www.houstontx.gov. To view your detailed application status, please log-in to your online profile by visiting: http://agency.governmentjobs.com/houston/default.cfm or call (832-393-0453). If you need special services or accommodations, call (832-393-0453). (TTY 7-1-1) If you need login assistance or technical support call 855-524-5627. Due to the high volume of applications received, the Hiring Department will contact you directly, should you be selected to advance in our recruitment process. All new and rehires must pass a pre-employment drug test and are subject to a physical examination and verification of information provided. EOE Equal Opportunity Employer The City of Houston is committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, genetic information, veteran status, gender identity, or pregnancy.

Summary As a Railroad Safety Inspector (Signal & Train Control), you will enforce Federal safety and health regulations that are concern with signal and train contrl and highway-rail grade crossing warning systems within an assigned territory. Learn more about this agency Summary As a Railroad Safety Inspector (Signal & Train Control), you will enforce Federal safety and health regulations that are concern with signal and train contrl and highway-rail grade crossing warning systems within an assigned territory. Learn more about this agency Overview Help Accepting applications Open & closing dates 05/01/2026 to 07/30/2026 Salary $89,508 - $145,468 per year Salaries for all areas are available on the OPM website at: https://www.opm.gov/policy-data-oversight/pay-leave/salaries-wages/2026/general-schedule/. Pay scale & grade GS 12 Locations Many vacancies in the following locations: Bakersfield, CA Bakersfield South, CA Fresno, CA Fresno County, CA Show morefewer locations (27) Kern County, CA Hampshire County, MA Lowell, MA Middlesex County, MA Northampton, MA Androscoggin County, ME Auburn, ME Augusta, ME Bangor, ME Bar Harbor, ME Hancock, ME Kennebec County, ME Penobscot, ME Lincoln, NE Omaha, NE Albany, NY Albany County, NY Nassau County, NY Suffolk County, NY Collin County, TX Dallas, TX Dallas County, TX Denton, TX Fort Worth, TX Houston, TX Tarrant County, TX Richmond, VA Remote job No Telework eligible No Travel Required 76% or greater - Travel is required. Relocation expenses reimbursed No Appointment type Permanent Work schedule Full-time - Full Time Service Competitive Promotion potential 12 Job family (Series) 2121 Railroad Safety Supervisory status No Security clearance Not Required Drug test Yes Position sensitivity and risk Moderate Risk (MR) Trust determination process Suitability/Fitness Financial disclosure Yes - The Ethics in Government Act of 1978 requires the applicant selected for this position to submit a Confidential Financial Disclosure Report (OGE Form 450) within 30 days of appointment and annually thereafter. Bargaining unit status Yes - This is a Bargaining unit position represented by AFGE 1084. Announcement number FRA.DH-2026-0002 Control number 867584000 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Career transition (CTAP, ICTAP, RPL) Federal employees whose job, agency or department was eliminated and are eligible for priority over other applicants. Clarification from the agency Applications will be accepted from any U.S. Citizen. Due to the potential of a high volume of applicants, not all applicants may receive consideration. Direct Hire Authority will be used to fill this position. The 'Rule of Many', Veterans Preference and traditional rating and ranking of applicants does not apply to this vacancy. Duties Help As a Railroad Safety Inspector (STC), you will: Plan and carry out an itinerary of periodic inspections of all signal and train control and highway-rail grade crossing warning systems in the territory to ensure that they are properly installed, operated, tested, and maintained. Performs highly technical investigations to determine the cause of signal and train control or highway-rail crossing conditions; e.g. improper signal aspects, hours of service violations. Evaluate railroads' request to install, modify, or remove limited portions of a signal or train control system; e.g., redesign of several miles of automatic block signals; assists the Regional Signal Specialist in evaluating more complex requests by analyzing portions of the regional inspection plan and making preliminary recommendations. Investigates independently or as a part of a team, accidents and fatalities of a railroad employee. During these investigations, the inspector will use experience and training, applicable CFR regulations, Compliance Manual, and General Manual. The ideal candidate: This position is perfect for a mid-level professional with strong technical background in applying current Federal railroad safety standards, as well as strong analytical and communication skills. The candidate must have experience in conducting inspections. The candidate must be mission focused and have the ability to interface will all levels of railroad management as well as the rail labor unions. PLEASE NOTE: This is an Open Continuous announcement. Applications will be reviewed and selections will be made at any time before the closing date. If your application is referred to the selecting official, you will be notified via USJOBS. All applicants will receive a final update once selections are complete. Requirements Help Conditions of employment You must be a U.S. citizen & meet specialized experience to qualify Submit application and resume online by 11:59 PM EST on the closing date Required documents must be submitted by the closing date. Direct Hire Authority/SME will be used to fill this position CONDITIONS OF EMPLOYMENT: As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: your performance and conduct; the needs and interests of the agency; whether your continued employment would advance the organizational goals of the agency or the Government; and whether your continued employment would advance the efficiency of the Federal service. Upon completion of your probationary period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest. SELECTIVE SERVICE: Males born after 12/31/1959 must be registered for the Selective Service. GOVERNMENT TRAVEL CARD: This position involves travel. A government contractor-issued travel card will be issued and must be retained for official business only. PROBATIONARY PERIOD: Applicants may be required to successfully complete a one-year probationary period (unless already completed). DRUG TEST: This position has been determined to be a critical safety/security position as defined in the Department of Transportation (DOT) Order, DOT 3910.1D entitled "Drug and Alcohol-Free Departmental Workplace." Therefore, if selected for the position you will be required to submit to a pre-employment/pre-appointment drug test, you will also be subject to Random Drug Testing. BACKGROUND INVESTIGATION: You may be required to complete a background/security investigation and meet preliminary requirements prior to onboarding. DRIVER'S LICENSE: All Railroad Safety Inspectors are required to possess a valid state drivers license at all times while employed by the Federal Rail Administration (FRA) in order to perform the duties of their positions. MOBILE WORK: Duty station will be serving the geographical area of selection. The duty location for mobile worker could be your residence or other approved mobile work site(s) and is subject to management approval. You will be required to establish and maintain a residence in the same geographical area as the preponderance of work for this position. (Or within 50 commuting miles of your assigned duty location). Qualifications To meet the minimum qualifications for this position, you must meet the specialized experience qualifications. To be qualified for a Railroad Safety Inspectorm the Qualifications Standards states you MUST have demonstrated knowledge in the following areas: Railroad industry, including economic and operating considerations and equipment. General safety and health principles and practices applicabe to the railroad industry. Railroad accident investigation tehcniques. Skill in written and oral communication. Knowledge of the design, installation, maintenance, testing, or inspection of signal and train control systems and their capabilities and limitations. Knowledge of applicable Federal laws and regulations pertaining to railroad signaling and train control systems ; AND Knowledge of locomotive braking systems and their relationship to and interface with train control or automatic train stop systems and braking distances. To qualify for the Grade 12, you must have at least one year of experience equal or equivalent to the GS-11 it must include: Experience applying your knowlegge of the applicable Federal laws, and regulations perftaining to railroad signal systems and highway-rail grade crossing warning systems. Experience conducting inspections related to the Signal and Train Control discipline. Experience writing and presenting information pertaining to signal and train control systems and highway-rail grade crossing active warning systems. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: Decision Making- Makes sound, well-informed, and objective decisions; perceives the impact and implications of decisions; commits to action, even in uncertain situations, to accomplish organizational goals; causes change. Compliance- Knowledge of procedures for assessing, evaluating, and monitoring programs or projects for compliance with Federal laws, regulations, and guidance. Communication- Experience writing and presenting information pertaining to signal and train control systems and highway- rail grade crossing active warning systems. Accident Investigation- Knowledge of guidelines, regulations, and procedures associated with an accident investigation including preservation of accident scene, root cause analysis, and evidence detection and handling. For all types of consideration, experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. For additional information about applying to Federal positions, please click on the following link: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-policies/#url=e4 All applicants must meet all qualification requirements by the closing date of this announcement. Additional information RAILROAD STOCK: Pursuant to 5 C.F.R. Parts 2635.403 and 6001.104 , all FRA employees (or spouses or minor children of FRA employees) are specifically prohibited from holding railroad stock (including shares of Berkshire Hathaway, Inc. which owns 100% of BNSF), whether held outright, in an IRA, or in a 401(k) or other plan. (Employees may hold a mutual fund which invests in railroad stocks, so long as the mutual fund does not invest more than 30% of its assets in such prohibited investments.) Employees having a prohibited finanical interest must divest themselves of railroad stock within 90 days after their appointment to their positions. Neither the rule against holidng railroad stock, nor the divestiture period, is in any way affected by the existence of re-employment rights which employees might have with railroad companies. Nor is there any monetary threshold for applicability of the rule against ownership of railroad stock; all dollar amounts are prohibited. The Fair Chance to Compete for Jobs Act prohibits the Department of Transportation and its Operating Administrations from requesting an applicant's criminal history record before that individual receives a conditional offer of employment. In accordance with 5 U.S. Code § 9202(c) and 5 C.F.R § 920.201 certain positions are exempt from the provisions of the Fair Chance to Compete Act. Applicants who believe they have been subjected to a violation of the Fair Chance to Compete for Jobs Act, may submit a written complaint to the Department of Transportation by email at, FairChanceAct@dot.gov. To learn more, please visit our page at: The Fair Chance to Compete Act | US Department of Transportation Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. How you will be evaluated You will be evaluated for this job based on how well you meet the qualifications above. For this announcement, applications will be reviewed to determine if the applicant meets the basic qualifications for this position. The applications of individuals who meet the basic qualifications will be assessed to validate that the applicant possesses the Knowledge, Skills, and Abilities (KSAs) at the level of proficiency needed to perform the job successfully. Applicants who are found to possess the necessary KSAs to perform the job may be referred to the selecting official for further consideration. This announcement may be used to fill additional positions if similar vacancies occur within 90 days of the issue date of the referral certificate. You may preview questions for this vacancy. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. Required documents Required Documents Help RESUME: In accordance with the OPM memorandum titled Merit Hiring Plan, dated May 29, 2025, resumes with a maximum of two (2) pages in length will be accepted as part of your application. These should be legible and in a readable font size. A determination of your eligibility and/or qualifications will be based only on those two (2) pages. Your resume MUST contain specific information that can be used to make a qualification determination, including employment beginning and ending dates for each position, whether employment is Full-time or Part-time, or average number of hours worked per week, and position titles. If the position is/was in the Federal government, you will need to provide the position series and grade level. The resume should show relevant experience and education, as well as support the required specialized experience. For assistance with the resume builder, please visit: https://help.usajobs.gov/how-to DISPLACED EMPLOYEES: If requesting consideration under the Career Transition Assistance Program (CTAP) or Interagency CTAP program (ICTAP), you must meet the standards for this vacancy and provide all of the following documents: your most recent performance appraisal, the proof of eligibility letter from the Agency, and your most current SF-50, displaying current series and grade. Qualified CTAP/ICTAP candidates receive priority and will be referred to the hiring manager. For more information, please review the OPM Employee's Guide to Career Transition. Failure to submit any of the required documents by the closing date of the vacancy will result in your removal from consideration for this position. Please review your application prior to final submission and ensure you have submitted all appropriate documents. Uploading documents to USA Jobs does NOT ensure inclusion with your application to our system. You must verify that the documents are in the system with your application prior to final submission. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

Who We Are Connecting People to Possibility As a publicly traded company (NYSE: CTRI) with $2.6 billion in revenue, Centuri leads the way in utility infrastructure across North America. What sets us apart is our local agility, resources to scale, and comprehensive solutions for a dynamic energy market. Whether in the field or providing essential behind the scenes support, Centuri offers professional growth opportunities where you can thrive and make a difference. Join a culture where safety, sustainability, and teamwork come first, with training and benefits that truly care for your well-being. Manager, Fleet Finance is responsible for overseeing financially impacted areas of fleet including the lifecycle management of leased equipment assets across Centuri's operations. Budgeting both departmentally and global CapEx lease budgets focuses on maximizing asset value, ensuring operational efficiency, and supporting strategic decision-making through data-driven insights. This position collaborates with cross-functional teams including operations, finance, logistics, and vendor partners to optimize asset performance and disposition strategies. This is located in Houston, Texas. What You'll Do Manage and drive continuous improvement in the CapEx/Lease budgeting and forecasting process. Partner with Operating Units to ensure CapEx/Lease forecasts are current and aligned for proper reporting and communications. Implementation and continuous improvement of asset acquisition processes. Collaborate with leasing partners to develop, implement, and ensure internal processes are followed and executed. Work closely with Finance to determine appropriate lease structures, including LOC and lease type. Works with finance team to manage lease assignments including LOC and lease type Identify new leasing partnerships while continuing to review opportunities with existing leasing partners. Manage and track all leases from initiation through termination. Assess leased equipment to determine market value based on condition, brand, age, and demand. Coordinate with internal teams and external partners-such as appraisers, vendors, and brokers-to ensure accurate valuations. Monitor market trends and resale conditions to support asset disposition strategies. Evaluate costs related to deinstallation, transport, and storage; recommend cost effective solutions. Oversee fixed asset lifing and full lease lifecycles, from acquisition to resale. Track asset performance and ROI, adjusting strategies to align with business needs. Maintain relationships with equipment vendors, brokers, and buyers. Partner with sales, operations, and customer service teams to align asset strategies with organizational goals. Ensure compliance with internal policies and external regulations. Prepare reports and dashboards to communicate asset status, valuation, and performance metrics. Builds and maintains budgets for all fleet reporting verticals. Performs other related duties as assigned or requested. Travel as necessary What You'll Have Bachelor's Degree in related field preferred ASA or equivalent appraisal certification preferred 5 years of experience in equipment asset management What You'll Get Benefit Package including Medical, Dental and Vision Coverage 401K w/ Company Match Voluntary Life & AD&D Insurance and Short-Term and Long-Term Disability Vacation/Sick Time and Paid Holidays Potential Bonus Opportunities Career Development Opportunities Employee Discounts Weekly Payroll Work Environment Work is performed in a typical indoor office environment Flexibility to work various schedules and stay late, when necessary, with little or no notice Must be able to read documents, use a computer, communicate verbally and in writing Mobility required within an office, warehouse and construction site environments Ability to occasionally lift up to 20 pounds Legal Stuff Pass pre-employment, random, post-accident, and reasonable suspicion drug screens Provide valid US work authorization documents for E-Verify Satisfactory results of pre-employment background check results Valid driver's license with clean driving record Diversity, Equity & Inclusion Commitment This job description is subject to change at any time. It reflects management's assignment of essential functions and does not exclude or restrict the tasks that may be assigned. Centuri and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability, or any other status protected by federal, state or local law. Centuri will provide reasonable accommodation to allow an applicant to participate in the hiring process (e.g., accommodation for a test or job interview) if so requested. Nearest Major Market: Houston

To assist in the handling and transportation of baggage as needed by Supervisor(s). QUALIFICATIONS: A. EDUCATION AND EXPERIENCE High School diploma or equivalent. Previous airport and/or customer service experience preferred. Previous baggage handling experience preferred. Must be 18 years of age or older. Must have a reliable telephone and transportation. B. PERSONAL AND PHYSICAL REQUIREMENTS Must be able to work inside and/or outside in all weather conditions if requested. (Mostly indoor work) Treat all information as confidential. Poses the tact to deal effectively with Clients, Passengers, Employees and the Public. Must be able to sit, stand, lift, and/or bend throughout shift. Must be able to push, pull, lift, carry, and/or hold at least 70 lbs. Must be able to perceive colors to match tags. Must pass pre-employment and random drug tests. Must be able to read, write, understand and carry out instructions in English both verbal and written. Must meet necessary requirements to obtain a security sensitive identification badge. C. PERFORMANCE RESPONSIBILITIES: Assist in the handling and transportation of baggage as directed. Actively participate in the Safety Management System (SMS) Transport checked baggage from one location to the appropriate location. Attend and pass re-current training as required. Must be familiar with all FAA/Airline/Company regulations. Keep supervisor informed of needs and problems in assigned areas, maintain cleanliness of immediate work area and report maintenance needs. Project a positive image and respond to inquiries from airlines, staff and public in a courteous manner. Attend meetings and inservices as required. Utilize appropriate communications channels and maintain records, reports and files as required. Must be attired in proper uniform or business attire as directed by company officials and identification must always be visible. Adhere to company policies and procedures and participate in achievement of company objectives. Utilize company and client equipment, supplies and resources in a conscientious, cost effective manner. * Perform other duties as requested

Must be 18 years of age or older HS Diploma or GED Valid Driver's License (Must meet the G2 Company Driving Policy) One (1) years of front-line experience in a similar or related role Minimum one (1) year of lead or supervisory experience in a similar or related role Excellent verbal and written communication skills Must meet all requirements to obtain an airport SIDA badge and Customs Seal (if applicable), including successfully completing a background check and ten-year work history Must have a reliable mode of communication and transportation PREFERRED EXPERIENCE: Experience in airport operations Airline or airport operations experience Leadership experience in the airline or airport operations experience PERSONAL AND PHYSICAL REQUIREMENTS Treat all information as confidential. Possesses the tact to deal with situations at all levels, client representatives, employees, and the public. Must be able to sit, stand, lift, and bend throughout shift. Must be willing and able to work in various climatic conditions including extreme heat and cold (over 100 to below 0), including high winds, rain, ice, and snow. Must be willing and able to cope with various non-routine situations, including, but not limited to, early/late flights, weather and mechanical delays, and passenger assistance, including accommodation/re-accommodation. Must pass pre-employment and random drug tests. Must be able to read, understand, and carry out instructions in English. Must meet requirements to obtain a security-sensitive identification badge. Must be able to direct in English verbally. Must be a citizen of the United States or possess the necessary authorization from the Immigration and Naturalization Service (INS). Be able to resolve problem situations with passengers when necessary. PERFORMANCE RESPONSIBILITIES Oversee administrative staff and assign duties to direct reports Manage the day-to-day operations within the primary area of responsibility for scheduling/staffing, managing daily budgeted hours, and limiting overtime. Ensure implementation of the Safety Management System (SMS) Implement a safety plan for the station Maintain Quality Assurance oversight for operational issues relating to performance and safety, providing suitable corrective and/or preventative actions where necessary Perform all duties of subordinate employees when necessary. Train/retrain all personnel in airline procedures, safety procedures, and company policies. Maintain good employee relations. Handle employee problems efficiently and effectively. Client Relations -- Effectively communicate with senior airline management and project a positive image in responding to inquiries from airlines, staff and the public. Adhere to company policies and procedures and participate in achieving company objectives. Monitor employee activity and adjust as needed. Handle off-schedule operations when the Manager is not available. Perform other duties as requested.

Coordinate communications to the cabin service agent team and management as well as updates / notifications between the the Client and employees. Ensures all data is recorded according to company procedures. QUALIFICATIONS: A. EDUCATION AND EXPERIENCE 1. High School diploma or equivalent. 2. Previous airport and/or customer service experience preferred. 3. Previous radio / phone dispatch experience desirable. 4. Previous supervisory experience preferred. 5. Must have good working knowledge of office environment software applications (word-processing, spreadsheet, data management). 6. Must be 18 years of age or older. 7. Must have a reliable telephone and transportation number. B. PERSONAL AND PHYSICAL REQUIREMENTS 1. Treat all information as confidential. 2. Posses the tact to deal with all levels of situations, client representatives, employees and the public. 3. Ability to work from verbal and written instructions. 4. Ability to communicate in English clearly and concisely verbally and in written form. 5. Must be detail-oriented and perform with minimal supervision. 6. Must be able to handle multiple situations simultaneously. 7. Must have excellent radio/telephone skills. 8. Must be able to lift, stoop, squat, push, stand and/or bend throughout the shift. 9. Must be able to lift, carry and/or hold up to 75 lbs. 10. Must pass pre-employment and random drug test. 11. Must complete a criminal background check. 12. Must meet necessary requirements to obtain a security sensitive identification badge. 13. Must be a citizen of the US or posses the necessary authorization from the immigration and naturalization Service (INS). PERFORMANCE RESPONSIBILITIES: 1. Must be familiar with and abide by all Client/company regulations. 2. Work with Client Special Services Representatives to ensure all requests for services are met. 3. Pull assignments or work orders from computer, as needed. 4. Do all reports accurately and in a timely manner. 5. Must be familiar with all FAA/ TSA/Airline/Company regulations. 6. Keep supervisor informed of needs and problems in assigned areas, maintain cleanliness of immediate work area and report maintenance needs. 7. Escalate issues to operations Manager Immediately. 8. Deal courteously and tactfully with fellow employees and passengers if necessary. 9. Communicate effectively with fellow employees. 10. Maintain all service transactions in Cabin Service tracking program (where available) or in the appropriate format for the location. 11. Create and generate reports of service performance in locations with the Cabin Service tracking program software or via manual performance logs. 12. Receive and respond to telephone and radio calls from Client representatives and employees in a professional and timely manner. 13. Maintain and distribute radios (where applicable). 14. Always complete the appropriate documentation and reports in thorough and timely manner. 15. Keep supervisor informed of needs and problems in assigned areas, maintain cleanliness of immediate work area and report maintenance needs. 16. Provide general information and directions to passengers. 17. Project a positive image and respond to inquiries from airlines, staff and public in a courteous manner. 18. Attend meetings and inservices as required. 19. Utilize appropriate communications channels and maintain records, reports and files as required. 20. Must be attired in proper uniform or business attire as directed by company officials and identification must always be visible. 21. Identification badges must always be visible. 22. Adhere to company policies and procedures and participate in achievement of company objectives. 23. Utilize company and client equipment, supplies and resources in a conscientious, cost effective manner. 24. Perform other duties as requested.

Transportation Director / Practice Leader - Houston, TX Halff is seeking a Director / Deputy Practice Leader, with their Texas Professional Engineer License, that would support and provide leadership in the Houston, Texas transportation market with a primary focus on strategy and growth with the TxDOT Houston District and other transportation clients in the Greater-Houston region. The selected individual will be responsible for the growth and success of transportation planning, design, and related services within the Greater-Houston region, including business development, client relationships and project delivery. Learn about Halff and our 75th Anniversary What you will do: Providing strong leadership and guidance in areas of technical expertise and providing oversight to the transportation practice in the region. Researching markets, developing/maintaining client relationships, and identifying business opportunities. Creating/executing strategic plans and guiding practice growth. Leading successful strategic pursuits and capture planning for specific opportunities. Working closely with operations staff in the region to identify, hire, develop and grow key staff and resources, and ensure successful project delivery. Working closely with Halff's national Transportation Practice to ensure implementation of best practices and leveraging firm-wide resources. What you will need: Bachelor's Degree or Master's Degree in Civil Engineering or ABET accredited equivalent Engineering degree A minimum of 15 years or more of progressive experience Professional Engineering (PE) License in the state of Texas Established leadership and expertise in the industry Strong client connections, particularly TxDOT relationships at senior levels Positive attitude, self-directed yet a team player, with a focus on integrity and quality The Halff Transportation Advantage Multi-discipline teams to meet challenges that are often complicated by aging infrastructure and shrinking budgets. Extensive knowledge in planning, designing and managing transportation projects to move people and goods safely and reliably. Collaborative approach to transportation projects. Learn more about Halff's Transportation services, check out some of our projects, and meet our team Halff's Transportation Services: Roadway Design Safety Improvements Structural Engineering TCP/Maintenance of Traffic Traffic Engineering/ITS Bicycle, Pedestrian and Active Transportation Planning and Design Drainage Design Feasibility and Preliminary Engineering Innovative Intersections Local and Regional Transportation Planning Multimodal and Transit Planning and Design NEPA Studies, Outreach and Visualization Company Overview: Halff is a mid-sized, employee-owned, diverse and full-service infrastructure consulting firm planned, designed, engineered, constructed - and purposed - for people. Since 1950, we've been creating smart solutions that improve lives and communities by turning ideas into reality. Halff was founded on a core tenet: Focus on people, treat them well, and success will follow. It's no wonder, then, that our employees and the culture they create result in our firm consistently being named a Top Workplace in America. Our industry-leading professionals collaborate to meet tough challenges in creative ways. You can view Halff's full complement of services here Halff has over 35 offices in Texas, Oklahoma, Louisiana, Florida and Arkansas. For a full list of our locations, click here We offer excellent benefits, including but not limited to: Medical, dental, prescription and life insurance Long-term and short-term disability insurance Paid time off (PTO) and 8 company paid holidays (and Veteran's Day for our veterans) Traditional and Roth 401(k) plans Employee Stock Ownership Plan (ESOP) Health Savings Account (HSA) 529 College Savings Plan Flexible spending accounts (FSA) Employee Assistance Plan * Click here for a more comprehensive list of Halff's benefits Salary is competitive and commensurate with experience. Halff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability or veteran status. Halff is a drug-free workplace. This offer of employment is contingent upon the receipt of a clear drug screen and background check prior to your first day of employment. This position may be subject to random drug testing pursuant to federal regulations. #LI-SV1

RAVN Group ("RAVN") is pushing the boundaries of innovation in the aviation industry, focusing on cutting-edge technology and advanced aerospace solutions. As part of the RAVN team, you'll be at the forefront of revolutionizing pilot training on military grade aircrafts and aerospace engineering in the defense sector. RAVN provides combat or high maneuver training for pilots, RDT&E, and maintenance services with its fully owned fleet of aircraft. Job Description: Company Summary RAVN is pushing the boundaries of innovation in the aviation industry, focusing on cutting-edge technology and advanced aerospace solutions. As part of the RAVN team, you'll be at the forefront of revolutionizing pilot training on military grade aircrafts and aerospace engineering in the defense sector. RAVN provides combat or high maneuver training for pilots, RDT&E, and maintenance services with its fully owned fleet of aircraft. Position Summary We are currently seeking experienced tactical pilots to support our DoD contracts. The ideal candidate will possess a strong background in military tactical flying, particularly in ADAIR (Adversary Air) and Contracted Close Air Support (CCAS). This role will involve flying critical sorties and conducting operational missions in support of defense initiatives. Key Responsibilities • Primary flying duties will include ADAIR and CCAS sorties in support of DoD contracts., • Additional duties may include various Research, Development, Test, and Evaluation (RDT&E) support as needed., • Conducting missions involving tactical flying qualifications within the defense sector., • Ensure adherence to safety protocols and operational standards during all flights., • Work collaboratively with other military personnel and contractors to achieve mission success. Desired Experience/Skills • U.S. Citizenship required; no foreign nationals permitted., • Must hold a current security clearance at a minimum of SECRET//NOFORN level., • Military tactical flying experience:, • 500 hours total tactical aircraft time and current in Armed Forces Reserve or Guard status, or, • 1000 hours tactical aircraft time if DoD Retired or Separated, or, • 1300 hours total time with 300 hours tactical aircraft time for retired/separated candidates., • Previous experience as a qualified DoD flight lead (4-ship for Adversary Air, 2-ship for Contracted Close Air Support) in F- or A-designated aircraft., • Tactical flying qualification within the last 5 years with a US Military Department, foreign DoD equivalent, or a US DoD contractor supporting Adversary Air or Contracted Close Air Support., • Tactical aircraft time in support of ADAIR is defined as flight hours in any Government-owned F-, A-designation, including T-38 ADAIR, T-38 IFF, and international exchange fighter equivalent aircraft while serving as Pilot in Command, Instructor Pilot, or Stan/Eval Flight Examiner., • FAA Class II medical rating., • FAA Commercial and Instrument Rating. Physical Demands • Occasional lifting of up to 50 pounds., • Regular use of hands and fingers to handle, feel, or operate objects, tools, or controls, reaching with hands., • Regularly ascend/descend stairs., • Occasional aircraft hangar or warehouse environment with exposure to loud noises, fumes from engines and chemicals, unpredictable climate (hot/cold), and electrical shock, or trip or slip hazards., • May be exposed to or required to handle hazardous material., • Specific work hours determined by operational, departmental, or contractual requirements., • Occasional evening, weekend, holiday work may be required., • Travel to various work sites may be required., • Other duties as assigned. Work Authorization • Must be lawfully eligible to work in the United States and complete an I-9 Form., • Must have a clean driving record., • RAVN Aerospace is a Drug & Alcohol-Free Workplace. Pre-employment, random, or for cause drug/alcohol testing (including for marijuana) required., • Pre-employment and ongoing physical certifications. Note: Certain qualifications may be waived on a case-by-case basis, depending on the candidate's level of experience. If you are ready to take on a challenging and rewarding role in the aerospace industry, apply now to join our team at RAVN Aerospace. RAVN Aerospace is an EEO/AA/Disabled/Veterans Employer I understand that if an offer of employment is made, I may be required to undergo investigation into all statements and references contained in this application. Said investigation may include credit, driving, criminal background, professional references, and other background checks. By applying for this position, I authorize post-offer investigation into my background as necessary and as a condition of employment. Note: a criminal conviction does not constitute an automatic bar to employment and will be considered only as it substantially relates to the position in question.

JOB DESCRIPTION: We are looking for a Manager of Logistics to join our team in Pasadena, Texas. This role oversees daily shipping, receiving, and warehousing operations to ensure timely, cost-effective distribution. Manage warehouse/shop staff, maintain accurate inventory, coordinate with carriers, and optimize supply chain processes. Key duties include enforcing safety protocols, reducing costs, and resolving logistical issues. SKILLS REQUIRED: ORGANIZATIONAL - LEADERSHIP AND ORGANIZATION • Lead, supervise, and develop logistics staff, including training and performance management, • Plan and prioritize daily operations to ensure efficient shipping, receiving and warehouse workflows., • Schedule personnel and allocate resources to meet productivity and delivery targets., • Implement and enforce safety protocols and operational procedures., • Monitor performance metrics (KPIs) and drive continuous improvement initiates., • Strong organizational and time management skills with the ability to manage multiple priorities. INTERPERSONAL - EXPEREINCE REQUIRED • Communicate effectively with internal teams across all levels of the organization., • Collaborate cross-functionally to resolve logistics and supply chain issues., • Provide clear direction, coaching, and feedback to team members., • Handle conflict resolution and problem-solving in a professional manner., • Customer-focused mindset when addressing service or delivery concerns. LOGISTICS, MATERIALS MANAGEMENT, SHIPPING & RECEIVING - EXPERIENCE PREFERRED • Oversee end-to-end shipping, receiving, warehousing and distribution operations., • Manage inventory control processes, including tracking, reconciliation, and accuracy., • Analyze logistics data and performance metrics to improve efficiency and reduce costs., • Resolve shipping discrepancies, delays and inventory issues., • Proficiency with inventory management systems and ERP systems., • Experience managing supply chain processes and mitigating bottlenecks. PRIMARY ROLE RESPONSIBILITIES: Operations Management: Oversee daily shipping/receiving, material handling, packing and warehouse workflows to ensure on-time delivery. Team Leadership: Supervise, train, and schedule logistics personnel, ensuring adherence to safety regulations and productivity standards. Inventory & Data Control: Monitor inventory levels, manage data, and ensure accurate record-keeping of goods received or shipped. Optimization & Compliance: Analyze Logistics metrics to identify, recommend, and implement improvements in efficiency and cost reduction. Ensure compliance with all legal regulations and company policies. Relationship Management: Liaise with local vendors, carriers, and suppliers to oversee service & rates and manage supply chain bottlenecks. ADDITIONAL RESPONSIBILITIES General: The above list of activities is not all-inclusive but a general representation of the requirements of the RMS Project Manager. This list is subject to changed based on the needs of the company. REQUIRED EXPERIENCE & QUALIFICATIONS Experience: Previous experience in logistics, warehouse operations, or supply chain management (5-10+yrs). Familiarity with international logistics and associated documentation, and ability to stay current on changing rules / regulations for international freight movement, is required. Leadership: Strong team management and employee mentoring skills. Communication: Excellent verbal and written communication skills for coordinating with internal teams and external stakeholders. Technical: Proficiency with inventory management software, data analysis tools and MS Office a plus. Problem-Solving: Ability to resolve shipping discrepancies, transportation delays, or inventory issues REQUIRED EDUCATION Bachelor's degree in supply chain management, business, or a related field is frequently preferred --- (Will consider High school diploma + 10 yrs proven experience in the field) ADDITIONAL REQUIREMENTS • The position will be based full-time in our RMS Bay Area Boulevard facility located in Pasadena, TX., • This is a full-time position, with a minimum expectation of 40 hours per week., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Able to understand, read, write, and speak English proficiently., • Able to pass a pre- employment drug and alcohol test and background check., • Authorized to work in the United States, • Must possess a valid driver's license., • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift., • Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance., • Must be able to use hands for assembly and tool usage., • Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel. Work Environment While performing the duties of this position, the employee may work / enter a shop or field service environment with exposure to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs, • Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! Visit www.rotatingmachinery.com to learn more about who we are and what we do. ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise-all backed by responsiveness in competitive prices and lead times. RMS' commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • You’ll be part of a team where YOU matter Powered by JazzHR x386mwTudN

Job DescriptionJob Description: Welder Pay: $19.00 - $20.00 based on testingWeekly Attendance bonus RESPONSIBILITIES • Grind barge & boat repair areas, internal compartments & cargo tanks, and external surface areas in preparation for welding., • Weld barge & boat repair areas, internal compartments & cargo tanks, external surface areas, and specialty components & areas with the required number of passes to achieve full penetration welds., • Operate welding & grinding equipment, blowers, hoses, etc., to accomplish weld & repair duties., • Must pass a welding test to obtain internal skill classification., • Mandatory drug testing prior to employment, and will be subject to random, unannounced drug and/or alcohol tests during employment., • Must be able to communicate and take directions from Foreman & Supervisor., • Able to work without contact lenses., • Required to arrive to work on time and also work overtime hours as required., • Understand general policies and procedures as described in the quality & environmental manuals., • Required to undergo a training program and participate in refresher training as needed., • Must have or be eligible for a TWIC card.EXPERIENCE & QUALIFICATIONS, • Must be proficient in English and be able to communicate effectively with others; Bilingual English/Spanish preferred., • Ability to multitask, learn quickly, and meet deadlines as needed., • Ability to understand Company Quality Manual and procedures described and required., • Ability to manage time and tasks effectively and efficiently., • High School Diploma or GED equivalent preferred. Safety & Environmental Factors: All employees are expected to adhere to the company’s safety policies to maintain a safe and healthy work environment. This role involves working under extreme hot or cold conditions and requires the physical ability to stand for the entire shift, use hands for various tasks, ascend stairs, balance, stoop, kneel, crouch, talk, and hear. Team members must occasionally lift items weighing up to 50 lbs. Specific vision abilities required include close, distant, and peripheral vision, depth perception, and the ability to focus. BenefitsAs part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes: • Medical Coverage, • Dental Coverage, • Vision Coverage, • Short Term Disability Benefits, • Term Life Benefits, • Note: The specific duties, skills and qualifications may vary depending on the company’s requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law. #ZR

Job Description JOB SUMMARY The Rotor Department Lead – Engineered Products position will perform and oversee a variety of tasks on turbomachinery components and assemblies to ensure compliance with specifications and quality requirements. ESSENTIAL FUNCTIONS • Leads a team of Rotor Technicians by assigning daily tasks, setting priorities, and ensuring efficient workflow to meet production goals in the Rotor Shop, • Oversees Phase I & Phase II inspections, as well as final build / balance on new and used Rotating Elements (and sub-components) for RMS and non-OEM turbomachinery including Axial, Single Stage Overhung, Horizontally and Vertically Split Multi-Stage, and Oil Free Screw Compressors; Hot Gas Expanders; Steam Turbines; and other rotating equipment as needed, • Collaborates with Management and Engineering teams to drive On-Time Delivery (OTD), resolve technical issues, and trouble shoot equipment or process challenges as needed, • Communicates effectively with coworkers, cross-functional teams, and customers to ensure alignment and successful project execution, • Trains and mentors Rotor Technicians, developing team capability and closing skill gaps, • Promotes a positive attitude, accountability, and a results-driven mindset focused on meeting deadlines while maintaining high quality standards, • Proficient in balancing and experienced in operating Schenck 980 Cabs driving 5K, 15K, and 70K balance machines, • Expert at precision measuring, pre-stack dimensional inspections, and pre / post overspeed inspections, • Knowledgeable of Rotor Shop subcomponents, including impellers, sleeves, balance pistons, shafts, etc., • Performs detailed visual inspections and mentors less experienced technicians on identifying critical findings, • Capable of safely handling and manipulating large rotors (20,000+ lbs) for assembly or disassembly, • Coordinates daily activities and allocates manpower to maintain production targets, • Participates in root cause failure analysis and recommends effective repair methods and procedures, • Coordinates material movement between work areas and shipping / receiving, • Notifies Quality and Production Manager of non-conformity and drives timely resolution, • Analyzes current and future workload capacity and adjusts priorities as needed, • Performs final testing and inspection as required, • Maintains a clean, organized and safe work environment while promoting 5S principles, • Demonstrates a strong commitment to safety and ensures compliance with all safety policies, procedures and instructions, • Leads team efforts in housekeeping and continuous improvement initiates, • Performs other duties and responsibilities as assigned ADDITIONAL RESPONSIBILITIES General: The above list of activities is not all-inclusive but a general representation of the requirements of the RMS Rotor Specialist Lead. This above list is subject to change based on the needs of the company. REQUIRED EXPERIENCE AND QUALIFICATIONS • Minimum ten years of experience with component assembly and dynamic balancing in turbo-machinery industry. REQUIRED EDUCATION • High School Diploma / GED from an accredited school or institution., • Post High School degree in a mechanical related field is a plus. ADDITIONAL REQUIREMENTS • The position may be based in RMS’s Pearland, TX facility., • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends may be required based on company and project needs., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Demonstrates a safety-first mindset, ensuring the well-being of self and coworkers at all times., • Communicates effectively with supervision, crafts, and customers throughout the inspection and repair process., • Exhibits strong organizational skills to manage tasks, priorities, and workflow efficiently., • Ability to work collaboratively and lead effectively in a team-oriented environment., • Expert in use of precision measuring equipment (mic, caliper, etc.), • Able to understand, read, write and speak English., • Ability and willingness to lift objects weighing up to 50 lbs. (with assistance), walk, climb, reach, kneel, crawl, and balance., • Must be able to use hands for assembling and tool usage., • While performing the duties of this position the employee will be required to stand, sit, bend, and walk for significant portions of the shift., • Must not have allergies or issues related to handling metals, including aluminum, copper, bronze, and steel., • Must possess a valid driver’s license., • Ability to pass a pre-employment drug, alcohol screening, and background check., • Authorized to work in the United States., • RMS Inc. may have government contracts that impose specific requirements on employees working on those projects. If an employee does not meet these requirements, they may be reassigned to a different location or be ineligible to work on certain assignments. Work Environment: While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts in a machine-shop environment. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs, • Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! Visit www.rotatingmachinery.com to learn more about who we are and what we do. ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionJOB SUMMARY RMS is looking for a Welder – Engineered Products to join our team. The Welder – Engineered Products will perform a variety of welding and fabrication operations on rotating equipment components and assemblies to ensure compliance with drawings, specifications, and quality standards. This position supports production activities through MIG, TIG, and stick welding of carbon steel, stainless steel, and alloy materials used in steam turbines, axial compressors, hot gas expanders, power turbines, screw compressors, and related turbomachinery. The Welder shall promote safe work practices, proper use of equipment, and adherence to quality requirements in all phases of fabrication, repair, and assembly while supporting production demands during first shift operations. JOB REQUIREMENTS AND QUALIFICATIONS • Able to pass WPQ on in-house procedures and maintains continuity log for audit purposes., • Responsible to fabricate centrifugal compressor impellers via “slot” and traditional fillet welding., • Knowledgeable in visual inspection of welds and familiar with grinding / upgrade techniques, • Performs pre-work including setup of positioners, thermal blankets, induction heaters, etc., • Tracks usage of consumables including burrs, torch tips, temp sticks, etc., • Familiar with repair on stationary and rotating components in turbomachinery such as compressors, turbines, pumps, etc., • Expert with manual GTAW welding; familiarity with automatic welding a plus, • Ability to SAW using our in-house automatic machine., • Able to inspect and record measurements of component parts to customer, OEM and industry standard specifications using a variety of precision measuring instruments, tools and gages., • Notifies Quality and Production Leadership in the event of non-conformity and drives for speedy resolution., • Maintain a safe working environment and a commitment to safety excellence., • Responsible for understanding and driving adherence to safety policy, procedures, and instructions., • Maintains a clean and organized work area., • Other projects and responsibilities may be added at the company’s discretion. Required Education: • High School Diploma / GED from an accredited school or institution., • Post High School degree in welding related field is a plus. Required Experience & Qualifications: • Minimum of 5 years' experience related to compressor or turbine rotors / components., • Sub Arc Welding, • PWHT setup preferred Knowledge and/or Skill Requirements: The position requires proficiency in the following areas: • Safety-first mindset with self and coworkers, • Familiarity rotating equipment including centrifugal compressors; steam turbines; axial compressors; hot gas expanders; power turbines, screw compressors; etc., • Excellent organization skills., • Expert in use of precision measuring equipment (mic, caliper, etc.), • Ability to work overtime, weekends and holidays, as required., • Ability to work in an environment of constant pushing, pulling, lifting, stretching, bending and other physical activities., • Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting, as required., • Ability and willingness to work around and use large propane / acetylene torches., • Ability to operate small lifts, pallet jacks and other lifting equipment., • Strong oral and written communication skills., • Basic computer and math skills. OTHER INFORMATION • The position may be based in RMS’s Pasadena, TX facility., • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends may be required based on company and project needs., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Ability to act professionally under stressful situations., • Able to understand, read, write and speak English., • Authorized to work in the United States, • Must have valid driver's license, • RMS Inc. may have government contracts that impose specific requirements on employees working on those projects. If an employee does not meet these requirements, they may be reassigned to a different location or be ineligible to work on certain assignments. Physical Requirements: • Ability and willingness to lift objects weighing up to 50 lbs.(with assistance), walk, climb, reach, kneel, crawl, and balance., • Must be able to use hands for assembling and tool usage, • While performing the duties of this position the employee will be required to stand, sit, bend, and walk for significant portions of the shift, • Must not have allergies or issues related to handling metals, including aluminum, copper, bronze, and steel. Work Environment: While performing the duties of this position, the employee may work / enter a shop or field service environment with exposure to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs, • Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! Visit www.rotatingmachinery.com to learn more about who we are and what we do. ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description JOB SUMMARY The Shop Lead (2nd Shift) position will perform and oversee a variety of mechanical operations / tasks on turbomachinery components and assemblies to ensure compliance with specifications and quality requirements. Essential Functions: • Provide oversight and leadership to all craft workers during 2nd shift including Balance, Machining, Mechanic, and Welding, • Provide concise hand-over notes to 1st shift highlighting status, issues, and opportunities., • Gives guidance and has ability to disassemble, inspect, repair, and reassemble RMS and non-OEM turbomachinery including compressors (centrifugal, liquid ring, etc.), gearboxes, pumps, turbines, etc., • Ensures that shipments and deliveries are made without issue, and at times will be mainly responsible to offload oversize goods using overhead crane or large forklift. Responsible for maintenance of all shipping paperwork during shift., • Able to inspect and record measurements of component parts to customer, OEM and industry standard specifications using a variety of precision measuring instruments, tools and gages., • Basic understanding of dynamic balancing equipment and how to build & balance various rotating elements., • Basic understanding of various machine tool setups and operation, • Coordinates material movements between work areas and with shipping / receiving., • Notifies Quality and Production Leadership in the event of non-conformity and drives for speedy resolution., • Analyzes and understands present and future workload / capacity and can re-prioritize / redirect work as needed., • Maintain a safe working environment and a commitment to safety excellence., • Responsible for understanding and driving adherence to safety policy, procedures, and instructions., • Leads group in maintaining a clean and organized work area., • Other projects and responsibilities may be added at the company’s discretion. JOB REQUIREMENTS AND QUALIFICATIONS Education: • High School Diploma / GED from an accredited school or institution., • Post High School degree in a mechanical related field is a plus. Knowledge and/or Skill Requirements: • Safety-first mindset with self and coworkers., • Set up and performing of hydro or gas leak tests., • Familiarity with OEM products (AC Compressor / Conmec / RMS) with ability to quickly understand non-OEM rotating equipment., • Communicate with supervision, crafts, and customers during the inspection and repair process., • Excellent organization skills., • Expert in use of precision measuring equipment (mic, caliper, etc.)., • Ability to lead in a team environment., • Ability to coach / mentor within the extended team, • Ability to work overtime, weekends and holidays, as required., • Ability to work in an environment of constant pushing, pulling, lifting, stretching, bending and other physical activities., • Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting, as required., • Ability and willingness to work around and use large propane / acetylene torches., • Ability to operate small lifts, pallet jacks and other lifting equipment., • Strong oral and written communication skills., • Basic computer and math skills. Previous Experience: • 15 years or more in relevant turbo-machinery industry. OTHER INFORMATION • The position may be based in RMS’s Mepco - Houston, TX facility., • This is a full-time position, with a minimum expectation of 40 hours per week, averaging 45 hours per week. Additional hours, including evenings or weekends, may be required based on project needs., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Must possess a valid driver’s license, • Ability to pass pre-employment drug, alcohol test, and background check., • Ability to act professionally under stressful situations., • Able to understand, read, write and speak English., • Ability and willingness to lift objects weighing up to 50 lbs. (with assistance), walk, climb, reach, kneel, crawl, and balance., • Must be able to use hands for assembling and tool usage, • While performing the duties of this position the employee will be required to stand, sit, bend, and walk for significant portions of the shift, • Must not have allergies or issues related to handling metals, including aluminum, copper, bronze, and steel., • Authorized to work in the United States, • RMS Inc. may have government contracts that impose specific requirements on employees working on those projects. If an employee does not meet these requirements, they may be reassigned to a different location or be ineligible to work on certain assignments. Work Environment: • While performing the duties of this position, the employee may enter a shop environment and will be exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machine operations that generate moderate noise and metal particles. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs, • Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! Visit www.rotatingmachinery.com to learn more about who we are and what we do. ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Summary/Objective: The Assistant Technician for Leak Repair is responsible for safely detecting, locating, evaluating and repairing leaks onsite at client work locations. Interacting with various customers to increase company presence in an assigned geographic area, as well as supervising and training new technicians or assistant technicians. The Assistant Technician is responsible for promoting the safety, quality, and integrity culture at Colt. Essential Functions and Responsibilities: • Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices alerting others regarding potential hazards both pertaining to and not pertaining to your scope of work, • Performs all duties as assigned and adheres to Colt’s Core Values, • Assists in assesses leaking components and reports on findings to operations, engineering, and customer representatives, • Assists in leak repair operations that may include any of the following techniques and tasks:, • Drill and tap of components, • Wire wrap and banding, • Use measuring tools such as calipers, tape measure, to obtain complex design criteria, • Various Clamp and enclosure installation, • Measuring Complex geometries of components, • Maintain on call status with ability to respond to customers rapidly and travel immediately to address customers emergency on site., • Assist in inspecting leak repair device provided by manufacturing as part of quality control prior to installation, • Identifies the necessity for the use of proper safety equipment, in coordination with the plant, and Colt’s safety matrix in order to perform all projects as safely as possible., • Assists with documentation and administrative procedures as required from a job to job basis, • Communicates and collaborate with, field personnel, client representatives and management in order to obtain successful completions of projects, • Maintains awareness of company products and services available to customer, • Be willing to assist with sales functions throughout assigned territory, • Willingness to take direction from supervisory and maintain good attendance, • Adhere to quality procedures and demonstrate a strong safety culture Skills/Knowledge/Abilities: • High school diploma or equivalent required. Technical or Trade school or related education preferred, • Entry level position but must have mechanical aptitude and skills, • Some experience with on-line leak repair preffered, • Must be able to pass routine and random drug screening, • Ability to perform a variety of tasks, often changing assignments on short notice, • Must be able to understand, speak, and write English, • Ability to prioritize and complete work assignments by specific deadlines, • Knowledge of plant maintenance and repair work preferred, • Have obtained or has the ability to obtain OSHA 10 And OSHA 30 certification. Work Conditions • Position is based out of a branch or site location with a geographic responsibility, • Field duties require indoor and outdoor work in a plant or industrial atmosphere, • Interaction with other crew employees, as well as supervisors and customer personnel, • Working around production machinery with extreme heat, and noise levels, • May be required to work in or near extreme hot or cold environments., • Must be able to wear safety equipment as required by the safety department for personal protection on a per job basis, • May be at more than one job site in a day and must be able to tolerate climate changes, • May be required to travel out of town on a periodic basis Physical and Mental Requirements • Ability to lift and carry 75 pounds, • Must be able to walk and climb throughout industrial areas including steps and ladders, • Ability to Communicate with customers in high stress environments,, • Ability to work on elevated or hard to reach surfaces and areas in a variety of locations throughout industrial facilities., • Must be able to manage time and schedule on a weekly basis and be able to travel when necessary to offsite locations, • Ability to maintain focus and multitask effectively on a variety of Job scopes for different locations, • Excellent communication skills, must be able to follow Standard Operating Procedures, evaluate each individual job scope, and mitigate all safety hazards with proper safety precautions and personal protective equipment. Colt is an equal opportunity employer and considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Colt is a dynamic organization. Accordingly, the responsibilities associated with this job will change from time to time in accordance with Colt’s business needs. More specifically, the incumbent may be required to perform additional and/or different responsibilities from those set forth above

Job Locations US-TX-Pearland Category (Portal Searching) Security Officer Level Workdays Available Tuesday, Sunday Shifts Available Morning, Overnight Business Unit AUS Allied Universal, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. As a Security Officer Day Patrol in Pearland, TX, you will serve and safeguard clients in a range of industries such as Residential, and more. Join a leading team where flexibility meets opportunity. As a Part-Time Security Officer, you can build a schedule that works for you and explore new roles using our Claim a Shift platform. Learn more: aus.com/earnmore. Join Allied Universal as an unarmed Residential Patrol Officer, where you will monitor and patrol a residential community, remain visible to help discourage security-related incidents, and support residents with exceptional customer service and communication. In this dynamic role, you will contribute to a welcoming location through teamwork, integrity, and a caring approach while bringing an agile, reliable, and innovative mindset to every shift. Position Type: Part Time Pay Rate: $16.50 / Hour Job Schedule: DayTime Tue10:00 PM - 06:00 AM Sun06:00 AM - 02:00 PM What You'll Do: Provide customer service to residents, guests, and/or visitors by carrying out security-related procedures, location-specific policies, and when appropriate, emergency response activities. • Respond to incidents, resident concerns, and critical situations in a calm, problem-solving manner, documenting details and communicating with property management and/or emergency services when needed., • Conduct regular and random patrols throughout the residential community, including common areas, amenities, parking areas, and perimeter access points, to help to deter unwanted activity and report unusual conditions., • Monitor entry and exit activity at gates and/or access points, verify visitor information when required, and report suspicious behavior, policy violations, and/or maintenance-related issues., • Support community rules and property protocols through visible presence, courteous interaction, and timely reporting of incidents, disturbances, and/or after-hours concerns. Minimum Requirements: • Be at least 18 years of age for unarmed roles; 21+ years of age for armed roles., • Possess a high school diploma or equivalent., • As a condition of employment, applicants will be subject to a background investigation in accordance with all federal, state, and local laws., • Allied Universal will consider qualified applications with criminal histories in a manner consistent with applicable laws., • As a condition of employment, applicants will be subject to a drug screen to the extent permitted by law., • Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment., • A valid driver's license will be required for driving positions only. Why Join Us: • Smart Tools: Access to our exclusive technology to view and claim additional shifts to earn more., • Career Growth: Get paid training and access to career growth opportunities., • Financial Benefits: Participate in our retirement savings plan to invest in your future., • Exclusive Perks: Enjoy discounts on top brands and services through our Perks Program. Allied Universal is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com. If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices. 2026-1606388

Allied Universal®, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. As a Security Officer Armed Patrol Driver Detail in Houston, TX, you will serve and safeguard clients in a range of industries such as Auto, and more. Join Allied Universal as an armed, driving patrol officer at a dynamic automotive location, where you will monitor and patrol assigned areas, stay visible to help discourage security-related incidents, and support daily operations through strong customer service and communication. In this role, you will bring an agile, reliable, and innovative approach, work with integrity, and contribute to a caring team-focused culture. Position Type: Full Time Pay Rate: $16.67 / Hour Pre-Employment Requirements (Contractual) Valid Driver's License - AU Driver Policy Requirements (C123) Armed Guard Card/License (C135) Job Schedule: DayTimeTue10:00 PM - 06:00 AMSat06:00 AM - 06:00 PMSun06:00 AM - 06:00 PM What You'll Do: • Provide customer service to employees, visitors, and/or contractors by carrying out security-related procedures, site-specific policies, and when appropriate, emergency response activities at an automotive location., • Respond to incidents, alarms, and/or critical situations in a calm, problem-solving manner, including situations that may require an armed presence and coordination with site leadership and/or public emergency services., • Conduct regular and random patrols throughout production areas, parking lots, entry points, and the perimeter to help to deter unauthorized activity and/or unusual conditions., • Monitor access points, verify credentials, and document visitor, vehicle, and/or delivery activity in accordance with site protocols and post orders., • Prepare clear reports on incidents, patrol activity, and/or observed concerns, and communicate relevant updates to supervisors, coworkers, and/or client representatives. Minimum Requirements: • An armed guard card and/or license is required., • A guard card and/or license is preferred., • A valid driver's license is required in accordance with Allied Universal driver policy requirements., • Be at least 21 years of age for armed roles., • Possess a high school diploma or equivalent., • As a condition of employment, applicants will be subject to a background investigation in accordance with all federal, state, and local laws., • Allied Universal will consider qualified applications with criminal histories in a manner consistent with applicable laws., • As a condition of employment, applicants will be subject to a drug screen to the extent permitted by law., • Participate in industry-specific security training programs., • Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment., • A valid driver's license will be required for driving positions only. Why Join Us: • Smart Tools: Access to our exclusive technology to view and claim additional shifts to earn more., • Career Growth: Get paid training and access to career growth opportunities., • Financial and Health Benefits: Enjoy access to a retirement savings plan, plus medical, dental, vision, basic life and AD&D, and disability insurance., • Exclusive Perks: Enjoy discounts on top brands and services through our Perks Program. Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com. If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices. 2026-1595047

Job Description JOB SUMMARY: Rotating Machinery Services, Inc. is seeking qualified Rotating Equipment Mechanics to work 2nd shift (3:00pm to 11:00pm) that will perform a variety of mechanical operations / tasks on turbomachinery components and assemblies to ensure compliance with specifications and quality requirements. This position requires experience working on pumps, gearboxes, compressors, and Blowers. SKILLS REQUIRED ORGANIZATIONAL - EXPERIENCE REQUIRED • Exceptional ability to multitask, prioritize, and manage time and resources effectively, • Excellent time management skills with a proven ability to meet deadlines., • Exceptional attention to details., • Display ownership and accountability for tasks and responsibilities., • Adaptable to changing schedules. INTERPERSONAL - EXPERIENCE REQUIRED • Excellent interpersonal and customer service skills., • Excellent verbal and written communication skills., • Ability to work within a team. EFFICIENCY - EXPERIENCE PREFERRED • Ability to manage other projects and responsibilities that may be added a the company's discretion., • Exceptional ability to multitask, prioritize, and manage time and resources effectively, • Installation, assembly and disassembly knowledge of turbo machinery., • Excellent time management skills with a proven ability to meet deadlines PRIMARY ROLE RESPONSIBILITIES • Unit disassembly, cleaning, and inspection including the accurate collection and recording of technical inspection data for equipment repair proposals., • Maintain, diagnose, and repair all types of rotating equipment., • Complete required maintenance to return equipment back to customer operating condition, per OEM specifications., • Prepare and complete service documentation., • Maintain clear and concise daily work records. Use of basic problem-solving skills in terms of gathering facts, analyzing the cause, and selecting the best most accurate solution., • Maintenance of shop equipment and regular daily shop housekeeping to ensure an organized and safe working environment., • Responsible for understanding and complying with the safety policy, procedures, and instructions., • Dissassemble complex rotating equipment and provide written observations of failure modes and condition of “as received” parts, • Assist in cleaning and prepping parts for NDT and PMI examination., • Perform and document detailed dimensional and runout inspection of all components., • Provide written inspection report, to include recommended repairs, and replacement parts needed., • Provide written instructions and drawings to other crafts involved in the manufacture or repair of components., • Perform quality checks on customer furnished, manufactured, and repaired components prior to final assembly., • Clean and prep parts for final assembly., • Assemble equipment complete per OEM, ASME, API, or customer supplied specification., • Document all final sizes, clearances, and documentation to provide customer with a final repair report., • Complete “as received” photo documentation and visual inspection of assemblies and customer furnished spare parts., • Must be a team player and be willing to train junior mechanics, • The position requires good attendance and punctuality, • Knowledge and use of all types of measuring devices and rotating equipment, • Supply basic mechanics tools and measuring devices required to complete work as assigned, • Other projects and responsibilities may be added at the company’s discretion. General: The above list of activities is not all-inclusive but a general representation of the requirements of the RMS Mechanic. This above list is subject to change based on the needs of the company. REQUIRED EXPERIENCE & QUALIFICATIONS • NCCER Millwright certification preferred, • 5-10 years of Mechanic experience working on pumps, gearboxes, blowers, compressors and turbines. EDUCATION • High School Diploma / GED from an accredited school or institution. ADDITIONAL REQUIREMENTS • The position may be based in RMS’s South Houston, TX facility., • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends, may be required based on project needs., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Must possess a valid driver’s license, • Ability to pass pre-employment drug, alcohol test, and background check., • Ability to act professionally under stressful situations., • Able to understand, read, write and speak English., • Ability and willingness to lift objects weighing up to 50 lbs. (with assistance), walk, climb, reach, kneel, crawl, and balance., • Must be able to use hands for assembling and tool usage, • While performing the duties of this position the employee will be required to stand, sit, bend, and walk for significant portions of the shift, • Must not have allergies or issues related to handling metals, including aluminum, copper, bronze, and steel., • Authorized to work in the United States, • RMS Inc. may have government contracts that impose specific requirements on employees working on those projects. If an employee does not meet these requirements, they may be reassigned to a different location or be ineligible to work on certain assignments. WORK ENVIRONMENT: While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs, • Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! Visit www.rotatingmachinery.com to learn more about who we are and what we do. Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description JOB DESCRIPTION: We are looking for a Project Manager to join our team. The primary function of an RMS Project Manager is to manage and track all phases of a project to ensure the finished product is delivered complete, on time and within budget. The Project Manager will communicate with the customer and all RMS disciplines in a timely manner the progress and requirements needed throughout the duration of the project. An electronic and paper project folder will be kept and maintained on each project. SKILLS REQUIRED: ORGANIZATIONAL - LEADERSHIP AND ORGANIZATION • Exceptional ability to multitask, prioritize, and manage time and resources effectively., • Excellent time management skills with a proven ability to meet deadlines., • Exceptional attention to details., • Display ownership and accountability for tasks and responsibilities., • Adaptable to changing schedules. INTERPERSONAL - EXPEREINCE REQUIRED • Excellent interpersonal and customer service skills., • Excellent verbal and written communication skills., • Ability to work within a team. TECHNOLOGIES - EXPERIENCE PREFERRED • Microsoft Office (Word, Excel, PowerPoint) required, • JobBoss preferred PRIMARY ROLE RESPONSIBILITIES: Commercial/ Sales: • Review and verify all paperwork handed over in the project kickoff meeting is correct and clearly identifies the responsibilities of RMS during the duration of the project and advise Commercial team of any and all discrepancies. Projects will coordinate with marketing/sales project changes, adders, duration and deliverables for customer consideration. Projects will include sales on pertinent communication with the customer. Engineering • Review project scope and schedule engineering deliverables (drawings, inspections, work instructions, reports. etc.) required throughout the project. Interface and coordinate communications between the shop, customers and vendors. Drafting • Develop drawing list and required dates with engineering and lead drafting person. Track drawing progress. Review drawings upon completion to determine RMS and Vendor requirements. Projects will write work orders or requisitions based on drawings and Work Instructions. Projects will assign material traceability numbers. Purchasing • The project manager will be responsible for writing requisitions. The requisitions will include type of material, quantity, description, required date, budgeted cost, required documentation and certifications. Projects will assign the purchase order number. The requisition will be reviewed with purchasing to assure compliance with requirements. Projects will track the placement of the requisition through the purchase order phase up to delivery. Projects will assist in communications, when necessary, between vendor and RMS. Project will fill out cost impact forms when necessary. RMS Shop • The project manager will be required to write all work orders and prepare work order documents based on drawing or work instruction requirements. The work order will include drawings, work instructions, material PO numbers, project number, standards and required date. Projects will track the progress of the work orders and help the shop determine project priorities. Projects will assist in communication between the shop, engineering, drafting, purchasing, vendors and the customer. Projects will prepare final shipping request form including list of items, job number, customer contact information, location, and determine party responsible for final shipping cost. Accounting • Project manager will review project payment terms with accounting, prepare project invoice requests and help with supporting documentation when required. Projects will assist in the preparation and updating of the progress payment schedule. Projects will assist in the preparation of the quarterly percent complete report. The project manager will identify all billable shipping costs. Customer Upon receipt of the customer purchase order the project manager will contact the customer introducing himself or herself. The project manager will keep the customer informed of the project status based on the contract requirements or more often based on the needs of the project. Projects will review deliverables and invoices with the customer. Projects will coordinate communications, when necessary, between the customer and the various RMS disciplines. Projects will coordinate all customer witness and hold points during the duration of the project ADDITIONAL RESPONSIBILITIES General: The above list of activities is not all-inclusive but a general representation of the requirements of the RMS Project Manager. This list is subject to changed based on the needs of the company. REQUIRED EXPERIENCE & QUALIFICATIONS • A minimum of 5 years of project management experience is required, preferably in manufacturing or with rotating equipment. REQUIRED EDUCATION • Associate’s or bachelor’s degree from an accredited institution is required. ADDITIONAL REQUIREMENTS • The position may be based in RMS’s Houston, TX facility or based remotely., • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends, may be required based on project needs., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Ability to act professionally under stressful situations., • Able to pass a pre-employment drug and alcohol test and background check, • Able to understand, read, write and speak English., • Ability to lift 30 pounds., • Authorized to work in the United States, • RMS Inc. may have government contracts that impose specific requirements on employees working on those projects. If an employee does not meet these requirements, they may be reassigned to a different location or be ineligible to work on certain assignments. Work Environment While performing the duties of this position, the employee may work / enter a shop or field service environment with exposure to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs, • Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! Visit www.rotatingmachinery.com to learn more about who we are and what we do. ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Termite & Pest Control Technician – Join Our Growing Team! Are you looking for a stable, long-term career with growth opportunities? Termite & Pest control is an essential service, and we’ve seen tremendous success over the past two years, making it the perfect time to join our team! With over 20 years of industry experience, we are offering a job where hard work meets stability. Why Work With Us? • Career Advancement: We are committed to your growth. As a full-time team member, you’ll have opportunities for career development and advancement in a stable industry., • Take-Home Company Vehicle: Enjoy the convenience of a company-provided truck and gas card., • Comprehensive Benefits: Health, dental, vision, and life insurance plans are available, along with a 401k plan with matching contributions to help you secure your future., • Competitive Pay: Earn a monthly commission between $2,500 to $4,500, plus bonuses, sales commissions, and tips., • Paid Time Off: Enjoy paid time off to maintain a healthy work-life balance. What You'll Be Doing: • Provide top-tier termite and pest control services in a variety of environments., • Work outdoors in all types of weather—hot, cold, or wet., • Operate independently in the field, Monday to Saturday (with some flexibility for weekend work as needed)., • Be an essential part of a team that plays a vital role in our customers’ safety and well-being. What We Expect From You: • MUST HAVE a termite license and previous experience. Previous experience in pest control is preferred but not required., • Strong knowledge of termite behavior, treatment methods, and pest control regulations., • Physical Stamina: This role requires hard work and outdoor work in all types of weather., • Dependability: We expect you to show up on time and work with integrity, as our customers rely on us., • Strong Driving Record: Must have held a valid driver’s license for at least 4 years, with no more than 2 violations and 1 accident in the past 3 years. No major violations (DUI, reckless driving, etc.) in the last 5 years., • Pass a Drug Test: Be prepared to pass a drug test during the interview and random tests thereafter., • Age Requirement: Insurance coverage requires employees to be 21 or older. Perks & Benefits: • 401(k) with matching contributions, • Health, dental, and vision insurance, • Life insurance, • Paid time off, • Employee discounts, • Bonus and commission opportunities Schedule: • Monday to Friday (with some Saturday shifts and weekend flexibility as needed) Work Location: Field-based – You will be working on the road. If you’re ready for a rewarding career in a stable industry with growth potential, we’d love to hear from you. Apply today!

Job Description AlediumHR is partnering with a forward-thinking telehealth organization that is redefining how men and women manage their health. Through expert clinical care and modern technology, this group is transforming hormone optimization, preventative medicine, and performance-based wellness nationwide. This is not a generalist telehealth role. This is for experienced nurse practitioners who understand hormone therapy and want to practice at a high level. The Opportunity We are seeking experienced, licensed Nurse Practitioners with at least 1 year of Hormone Replacement Therapy (HRT) experience for both men and women. These are both part-time and full-time availability. Providers work remotely and deliver high-impact care through a structured, technology-enabled telehealth model. Licensing Requirements (Non-Negotiable) Active NP license in a minimum of 6 U.S. states California, Texas, New York, and Colorado licenses are in demand, Active, unrestricted DEA license • Ability to prescribe and manage controlled substances in compliance with federal and state regulationsRequired Clinical Experience Minimum 1 year of hands-on Hormone Replacement Therapy experience Experience treating both male and female patients • Comfort managing testosterone therapy, estrogen/progesterone therapy, adjunct wellness medications, and ongoing lab monitoring, • Strong understanding of endocrine health, preventative care, and optimization protocolsWhat You'll Do, • Conduct structured virtual consultations for men and women seeking hormone optimization and wellness care, • Review labs, diagnose hormone imbalances, and develop evidence-based treatment plans, • Initiate and manage HRT protocols, including appropriate prescribing and follow-up, • Provide patient education on risks, benefits, and long-term care strategies Maintain thorough, compliant documentation within telehealth platforms • Collaborate with a clinical and administrative support team to ensure a seamless patient experienceWork Environment Remote Flexibility Work from home with scheduling options that fit your availability. Focused Practice Model This is a specialized hormone and wellness platform. You will not be handling random urgent care visits or unrelated cases. Operational Support Administrative, tech, and compliance infrastructure are in place so you can focus on patient care. Growth Environment Join a high-growth telehealth organization expanding nationwide. Apply now to join a team committed to elevating hormone health across the country.

Job DescriptionOverview Allied Universal®, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. Job Description As a Security Officer Experienced Armed Driving Role in Houston, TX, you will serve and safeguard clients in a range of industries such as Retail/Malls, and more. Join Allied Universal as an armed patrol officer at a busy retail location, where you will conduct routine patrols, maintain a visible presence to help discourage security-related incidents, and deliver outstanding customer service and communication. This is a driving and armed post for professionals who bring confidence, integrity, and teamwork to every shift while supporting a caring, agile, and reliable culture. Position Type: Full Time Pay Rate: $22.00 / Hour Pre-Employment Requirements (Contractual) 21+ Years of Age (C101) Active Armed Guard Card/License (Texas only) (C122) Valid Driver's License - AU Driver Policy Requirements (C123) 3+ Years' Combined Law Enforcement/Corrections/Military OR 5+ Years Armed Security Experience (C158) Job Schedule: DayTimeMon01:00 PM - 11:30 PMFri03:00 PM - 11:30 PMSat03:00 PM - 11:30 PMSun01:30 PM - 11:30 PM What You'll Do: • Provide customer service to clients, visitors, and/or staff by carrying out security-related procedures, site-specific policies, and when appropriate, emergency response activities at a retail location., • Respond to incidents, disturbances, and critical situations in a calm, problem-solving manner, documenting observations and communicating with site contacts and/or local law enforcement when needed., • Conduct regular and random patrols throughout the store, surrounding exterior areas, parking lots, and perimeter to help to deter unwanted activity and report suspicious behavior., • Monitor entrances, exits, high-traffic areas, and cash-handling zones to help to deter theft, trespassing, and/or disorderly conduct while maintaining a professional presence., • Carry authorized armed equipment in accordance with post orders, Allied Universal guidelines, and applicable laws, and be prepared to respond to security-related concerns at the location. Minimum Requirements: • Possess 3+ years of combined law enforcement, corrections, or military experience, or 5+ years of armed security-related experience., • Be at least 21 years of age., • A valid driver's license is required in accordance with Allied Universal driver policy requirements., • Level III Armed Certification is required in Texas only., • Be at least 21 years of age for armed roles., • Possess a high school diploma or equivalent., • As a condition of employment, applicants will be subject to a background investigation in accordance with all federal, state, and local laws., • Allied Universal will consider qualified applications with criminal histories in a manner consistent with applicable laws., • As a condition of employment, applicants will be subject to a drug screen to the extent permitted by law., • Participate in industry-specific security training programs., • Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment., • A valid driver's license will be required for driving positions only. Why Join Us: • Smart Tools: Access to our exclusive technology to view and claim additional shifts to earn more., • Career Growth: Get paid training and access to career growth opportunities., • Financial and Health Benefits: Enjoy access to a retirement savings plan, plus medical, dental, vision, basic life and AD&D, and disability insurance., • Exclusive Perks: Enjoy discounts on top brands and services through our Perks Program. Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com. If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices. Requisition ID 2026-1600895

Job Description The Waterproofing Foreman will lead a small team of 1-5 workers on both commercial and residential waterproofing projects. This role requires hands-on supervision to ensure projects are completed safely, on time, and to quality standards. Occasional travel between various job sites is expected to maintain direct oversight and effective coordination. The Foreman will enforce OSHA standards and company-specific safety policies to promote a safe working environment. Responsibilities • Supervise and coordinate daily activities of small construction teams, • Develop and maintain project/production schedules to meet deadlines, • Enforce compliance with OSHA standards and company safety policies, • Ensure quality control throughout all phases of the project, • Manage equipment allocation and maintenance, • Resolve conflicts and facilitate clear communication among team members, • Oversee material management and inventory on-site, • Submit daily timesheets and job documentation, • Communication with owner, engineers and office personnel Required Qualifications • Experience in Waterproofing or related construction field, • High School Diploma or equivalent, • OSHA 10 or 30 Hour Certification, • Knowledge of Waterproofing, • Ability to read and interpret blueprints, • Basic math and computer skills, • Skill in project scheduling and coordinating tasks, • Understanding of safety regulations and protocols, • Proven team leadership abilities, • Strong problem-solving and conflict management skills, • Effective communication skills, • Bilingual in English and Spanish, • Must be authorized to work in the United States, • Valid Driver’s License, • Ability to lift up to 50 lbs regularly and 100 lbs with assistance, • Must pass background check and random drug screenings A company vehicle, fuel card, cell and laptop will be provided to you Monthly gym membership paid by employer location to be chosen by employer Paid leave for volunteer work