Offres repair à Corpus Christi, TexasCréer des alertes d'emploi

Job Description Job Summary Supports daily job site operations through manual labor, site preparation, demolition, and material handling while performing general painting, sheetrock repair, and drywall finishing duties. This is a 1099 position Key Responsibilities • General Construction Labor: Clean and prepare job sites, set up temporary protection, load/unload materials, and assist skilled trades as needed., • Demolition & Site Cleanup: Perform light structural teardowns, clear debris, operate shop vacs, and maintain a safe, hazardous-free work environment., • Drywall & Sheetrock Repair: Install, patch, and repair damaged drywall panels, ceilings, and corners., • Taping, Floating & Finishing: Apply joint tape and multiple coats of joint compound (mud/float) to achieve smooth, seamless surface finishes., • Prep & Surface Work: Mask off fixtures, trim, and floors; sand walls; fill nail holes; and apply primer before painting., • Painting: Execute interior and exterior coating using brushes, rollers, and sprayers; maintain clean edges and uniform coverage. Qualifications & Requirements • Skill / Requirement- 1+ years of experience in general construction, site maintenance, painting, or drywall work., • Technical Proficiency- Basic-to-intermediate knowledge of sheetrock repairs, mudding/taping, prep work, and tool operation., • Physical Demands- Ability to lift 50+ lbs, climb ladders, maneuver scaffolding, and perform continuous physical labor., • Tools & Equipment- Familiarity with basic hand tools, power tools, joint knives, sanding blocks, and painting tools., • Work Ethic- Strong attendance record, safety-first mindset, and ability to follow site lead directions.

Job Description Contractors Glass Products, a division of Arrow Mirror and Glass Inc, specializes in residential, multi-family and commercial glass installations. We are seeking skilled glaziers to join our team. Duties are as followed but not limited to: Precisely measure glass & mirror products (to be fabricated at our facility) Precisely measure for single and double pane window glass replacements. Glass Cutting on-site and in shop Metal Fabrication on-site and in shop Residential and Commercial Glass Installations – Mirrors, shower glass, cabinet glass, shelf glass, tabletop glass, window glass replacements, door glass, storefront glass, glass railing systems Residential and Commercial Metal Installations- Showers, mirrors, storefront systems, curtain wall systems Repair/replacement service, as needed Caulking Loading/Unloading of equipment, glass and other materials Valid driver’s license a plus Some glass experience required Education Required: High School Diploma/GED Physical Demands and Work Environment: This job requires intermittent periods during which continuous physical exertion is required such as walking, standing, stooping, and climbing. Pay range will be based on experience. Full–Time with benefits. Must pass background check & drug test. Serious inquiries need only apply.

This job requires relocation. Description\n \n The Cardiac Cath Lab consists of 6 angiographic suites, one of those being dedicated to Electrophysiology Procedures (EP), as well as a Hybrid OR suite. We do 4000 diagnostic and 900 interventional cardiology and peripheral procedures annually. Our procedures include Right/Left Heart Catheterizations, percutaneous coronary/peripheral interventions, AAA stent repairs, Transcutaneous Aortic Valve Repair (TAVR), EP Ablations, and pacemaker/ICD implants. We are a member of the Society of Cardiovascular Patient Care, with door-to-balloon times of 60 minutes. Our employees have a combined experience level of well over 200 years on the team. \n Summary: \n The competent Nurse, in the same or similar clinical setting, practices independently and demonstrates an awareness of all relevant aspects of a situation. Provides routine and complex care, with the ability to on long-range goals or plans. Continues to develop the ability to cope with and manage contingencies of clinical nursing. Makes appropriate assignments and delegates to other care providers as a means to help manage the clinical situation. \n Responsibilities: \n\n • Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.\n, • Consistent with the ANA Scope and Standards of Practice, provides nursing care utilizing the nursing process, including assessment, diagnosis, planning, intervention and evaluation for assigned patients.\n, • Addresses increasingly complex psychological, emotional, cultural, and social needs of patient and families in accordance with their level of practice.\n, • Using the appropriate protocol, administers medications and treatments; monitors for side-effects and effectiveness of the treatment prescribed.\n, • Documents patient history, symptoms, medication, and care given.\n, • Assess learning needs and provides education to patients, family members and/or care givers; identify issues and resources. \n\n Job Requirements: \n Education/Skills \n\n • Bachelor of Science Degree in Nursing, preferred\n\n Experience \n\n • 1 year of experience in the related nursing specialty preferred\n\n Licenses, Registrations, or Certifications \n\n • BLS required\n, • RN License in state of employment or compact\n\n Position Requirements: \n Education/Skills \n\n • All newly hired experienced RNs must attend New Nurses Orientation within the first 30 days of hire.\n, • New hires are precepted by a designated trained staff member and initial on-boarding requirements are validated through successful completion of the designated organizational entry competency validation and a Critical Care Department-specific competency validation.\n, • Completion of all annual competency verification requirements.\n\n Experience \n\n • One year of experience in Critical Care setting preferred but will accept new graduates.\n\n Licenses, Registrations, or Certifications \n\n • Current ACLS certification required\n\n In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain required certifications for their respective positions within the designated time frame. \n \n Credential Grace Periods: \n If additional credentials are required per the Position Requirements section, a grace period to obtain the certification will apply, dependent on your experience level. \n\n • Any Candidate/Associate with at least one year of acute care clinical experience in a similar service line within the past three years is considered an Experienced Associate.\n, • Any Candidate/Associate who does not have at least one year of full-time acute care clinical experience in the same service line within the past three years is considered an Experienced Associate New to the Specialty. \nCredential\n Grace Periods for \n Experienced Associates \n Grace Periods for \n New Graduates & Experienced Associates New to the Specialty Basic Life Support (BLS)No grace period. AHA or Red Cross accepted at time of hire.No grace period. AHA or Red Cross accepted at time of hire.Advanced Cardiac Life Support (ACLS)Within 30 days of hire.Within 90 days of hire.Pediatric Life Support (PALS)Within 30 days of hire.Within 90 days of hire.Trauma Nurse Core Curriculum (TNCC)Within 60 days of hire.Within 18 months of hire.Trauma Care After Resuscitation (TCAR)Within 60 days of hire.Within 18 months of hire.Neonatal Resuscitation Program (NRP)Within 30 days of hire.Within 60 days of hire.AWHONN INTERMEDIATE FHM (Fetal Heart Monitoring)Within 30 days of hire.Within 60 days of hire.STABLE (Neonatal Education)Within 30 days of hire.Within 60 days of hire.\n \n Work Schedule: \n 4 Days - 10 Hours \n Work Type: \n Full Time

This job requires relocation. Description\n \n Summary: \n The Supervisor Registered Nurse Clinic is accountable for the daily operations of the clinic and for supervising the delivery of high-quality, cost-effective care to patients within the clinic setting. This role supports the Clinic Manager in analyzing, planning, implementing, evaluating, and communicating processes and programs that enhance, strengthen, and integrate the services of the clinic. The Supervisor assumes primary responsibility for effective supervision of nursing activities within their assigned clinic area(s), assisting with the management of financial and human resources to ensure services meet established quality and productivity standards. They provide feedback and assistance concerning patient satisfaction, staff development, and associate performance and satisfaction, collaborating with other clinical and ancillary departments to meet organizational and clinic-specific Quality and Safety Measures, Community Values, Business Literacy, and Service Excellence goals. \n Responsibilities: \n\n • Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.\n\n Operational Leadership & Patient Care Oversight: \n\n • Maintains the daily operations of the clinic, ensuring efficient workflow and high-quality, safe patient care.\n, • Implements and monitors nursing care programs and practices, ensuring consistent application of policies and standards.\n, • Monitors patient outcomes and the effectiveness of nursing care, adjusting as needed.\n, • Manages day-to-day labor needs, including staffing levels and PTO requests, to ensure optimal coverage.\n, • Oversees the ordering of departmental and medical supplies, manages budget, and equipment maintenance/repair.\n, • Ensures compliance with quality control standards (e.g., immunization logs, waived testing, drug sample logs).\n\n Team Leadership & Staff Development: \n\n • Supervises clinic nursing staff, identifying and addressing training and development needs.\n, • Provides coaching, mentorship, and performance evaluations for personnel.\n, • Resolves staff and patient issues, escalating complex concerns to the Clinic Manager.\n, • Fosters a healthy work environment that promotes diversity, teamwork, and stress management.\n, • Applies crisis management principles to address immediate issues and conflicts effectively.\n\n Quality Improvement & Compliance: \n\n • Assesses and addresses customer and patient satisfaction, implementing strategies for improvement.\n, • Monitors and promotes workplace safety to ensure positive patient outcomes.\n, • Supports nursing research and quality improvement initiatives within the clinic.\n, • Ensures all clinic activities comply with healthcare laws, regulations, and ethical standards, including HIPAA.\n, • Participates in the development and implementation of clinical policies and standards.\n\n Communication & Professionalism: \n\n • Communicates effectively, both orally and in writing, consistent with the organizational mission.\n, • Maintains strict confidentiality of patient information.\n, • Upholds CHRISTUS Health policies, procedures, objectives, and ethical guidelines.\n, • Demonstrates strong leadership qualities and adapts leadership style to various situations to motivate and increase productivity.\n\n Job Requirements: \n Education/Skills \n\n • Bachelor of Science in Nursing (BSN) preferred\n\n Experience \n\n • 4 – 6 years of clinical experience preferred\n, • 2 years of leadership/ management experience preferred\n\n Licenses, Registrations, or Certifications \n\n • RN License in the state of employment or compact required\n, • BLS required\n\n In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame. \n \n Work Schedule: \n 8AM - 5PM Monday-Friday \n Work Type: \n Full Time

This job requires relocation. Description\n \n Summary: \n The Supervisor Registered Nurse Clinic is accountable for the daily operations of the clinic and for supervising the delivery of high-quality, cost-effective care to patients within the clinic setting. This role supports the Clinic Manager in analyzing, planning, implementing, evaluating, and communicating processes and programs that enhance, strengthen, and integrate the services of the clinic. The Supervisor assumes primary responsibility for effective supervision of nursing activities within their assigned clinic area(s), assisting with the management of financial and human resources to ensure services meet established quality and productivity standards. They provide feedback and assistance concerning patient satisfaction, staff development, and associate performance and satisfaction, collaborating with other clinical and ancillary departments to meet organizational and clinic-specific Quality and Safety Measures, Community Values, Business Literacy, and Service Excellence goals. \n Responsibilities: \n\n • Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.\n\n Operational Leadership & Patient Care Oversight: \n\n • Maintains the daily operations of the clinic, ensuring efficient workflow and high-quality, safe patient care.\n, • Implements and monitors nursing care programs and practices, ensuring consistent application of policies and standards.\n, • Monitors patient outcomes and the effectiveness of nursing care, adjusting as needed.\n, • Manages day-to-day labor needs, including staffing levels and PTO requests, to ensure optimal coverage.\n, • Oversees the ordering of departmental and medical supplies, manages budget, and equipment maintenance/repair.\n, • Ensures compliance with quality control standards (e.g., immunization logs, waived testing, drug sample logs).\n\n Team Leadership & Staff Development: \n\n • Supervises clinic nursing staff, identifying and addressing training and development needs.\n, • Provides coaching, mentorship, and performance evaluations for personnel.\n, • Resolves staff and patient issues, escalating complex concerns to the Clinic Manager.\n, • Fosters a healthy work environment that promotes diversity, teamwork, and stress management.\n, • Applies crisis management principles to address immediate issues and conflicts effectively.\n\n Quality Improvement & Compliance: \n\n • Assesses and addresses customer and patient satisfaction, implementing strategies for improvement.\n, • Monitors and promotes workplace safety to ensure positive patient outcomes.\n, • Supports nursing research and quality improvement initiatives within the clinic.\n, • Ensures all clinic activities comply with healthcare laws, regulations, and ethical standards, including HIPAA.\n, • Participates in the development and implementation of clinical policies and standards.\n\n Communication & Professionalism: \n\n • Communicates effectively, both orally and in writing, consistent with the organizational mission.\n, • Maintains strict confidentiality of patient information.\n, • Upholds CHRISTUS Health policies, procedures, objectives, and ethical guidelines.\n, • Demonstrates strong leadership qualities and adapts leadership style to various situations to motivate and increase productivity.\n\n Job Requirements: \n Education/Skills \n\n • Bachelor of Science in Nursing (BSN) preferred\n\n Experience \n\n • 4 – 6 years of clinical experience preferred\n, • 2 years of leadership/ management experience preferred\n\n Licenses, Registrations, or Certifications \n\n • RN License in the state of employment or compact required\n, • BLS required\n\n In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame. \n \n Work Schedule: \n 8AM - 5PM Monday-Friday \n Work Type: \n Full Time

Description\n \n Summary: \n The Supervisor Registered Nurse Clinic is accountable for the daily operations of the clinic and for supervising the delivery of high-quality, cost-effective care to patients within the clinic setting. This role supports the Clinic Manager in analyzing, planning, implementing, evaluating, and communicating processes and programs that enhance, strengthen, and integrate the services of the clinic. The Supervisor assumes primary responsibility for effective supervision of nursing activities within their assigned clinic area(s), assisting with the management of financial and human resources to ensure services meet established quality and productivity standards. They provide feedback and assistance concerning patient satisfaction, staff development, and associate performance and satisfaction, collaborating with other clinical and ancillary departments to meet organizational and clinic-specific Quality and Safety Measures, Community Values, Business Literacy, and Service Excellence goals. \n Responsibilities: \n\n • Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.\n\n Operational Leadership & Patient Care Oversight: \n\n • Maintains the daily operations of the clinic, ensuring efficient workflow and high-quality, safe patient care.\n, • Implements and monitors nursing care programs and practices, ensuring consistent application of policies and standards.\n, • Monitors patient outcomes and the effectiveness of nursing care, adjusting as needed.\n, • Manages day-to-day labor needs, including staffing levels and PTO requests, to ensure optimal coverage.\n, • Oversees the ordering of departmental and medical supplies, manages budget, and equipment maintenance/repair.\n, • Ensures compliance with quality control standards (e.g., immunization logs, waived testing, drug sample logs).\n\n Team Leadership & Staff Development: \n\n • Supervises clinic nursing staff, identifying and addressing training and development needs.\n, • Provides coaching, mentorship, and performance evaluations for personnel.\n, • Resolves staff and patient issues, escalating complex concerns to the Clinic Manager.\n, • Fosters a healthy work environment that promotes diversity, teamwork, and stress management.\n, • Applies crisis management principles to address immediate issues and conflicts effectively.\n\n Quality Improvement & Compliance: \n\n • Assesses and addresses customer and patient satisfaction, implementing strategies for improvement.\n, • Monitors and promotes workplace safety to ensure positive patient outcomes.\n, • Supports nursing research and quality improvement initiatives within the clinic.\n, • Ensures all clinic activities comply with healthcare laws, regulations, and ethical standards, including HIPAA.\n, • Participates in the development and implementation of clinical policies and standards.\n\n Communication & Professionalism: \n\n • Communicates effectively, both orally and in writing, consistent with the organizational mission.\n, • Maintains strict confidentiality of patient information.\n, • Upholds CHRISTUS Health policies, procedures, objectives, and ethical guidelines.\n, • Demonstrates strong leadership qualities and adapts leadership style to various situations to motivate and increase productivity.\n\n Job Requirements: \n Education/Skills \n\n • Bachelor of Science in Nursing (BSN) preferred\n\n Experience \n\n • 4 – 6 years of clinical experience preferred\n, • 2 years of leadership/ management experience preferred\n\n Licenses, Registrations, or Certifications \n\n • RN License in the state of employment or compact required\n, • BLS required\n\n In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame. \n \n Work Schedule: \n 8AM - 5PM Monday-Friday \n Work Type: \n Full Time

Job DescriptionDescription:Offshore Welder Location: Offshore Employment Type: Full-time Job Summary The Offshore Welder position requires the individual to demonstrate the ability to weld on piping and/or structural components as directed and per Acadian (or customer) welding procedure requirements. The role demands efficient, productive work throughout the day, punctual attendance, and professionalism in all working relationships. The Welder is ultimately responsible for the quality and completeness of their workmanship. Acadian Contractors, Inc. maintains a continuing policy of non-discrimination in employment. It is our policy to provide equal opportunity to protected veterans in all phases of the employment process and in compliance with applicable federal, state, and local laws and regulations. This policy of non-discrimination shall include, but not be limited to, the following employment decisions and practices: hiring; promotions; demotions or transfers; layoffs; recalls; terminations; rates of pay or other forms of compensation; selection for training, including apprenticeship; and recruitment or recruitment advertising. All employment decisions are based only on valid job requirements. Key Responsibilities • Use pipe cutting machine, or if unavailable, use beveling machine to cut pipe to the required length., • Upon completion of every weld, clean and apply stencil/stamp (3/8” from every weld). Vessel fabrication/welding requires stenciling every three (3) feet of weld length., • Communicate with the helper/rigger regarding necessary materials or equipment for each task., • Align parts using jacks, turnbuckles, wedges, drift pins, pry bars, and heavy hammers., • Straighten warped or bent parts using sledge, hand torch, straightening press, and push/pull methods., • Ensure daily submission of accurate oxygen and acetylene bottle counts to offshore management., • Ensure all welding activities comply with company policies, class requirements, and regulatory laws., • Maintain accurate inventory of consumables to facilitate repair work, modifications, and general fabrication., • Perform welding, flame cutting, and associated tasks as required., • Assemble and secure pipes, tubes, fittings, and related equipment according to specifications by welding, brazing, cementing, soldering, and threading joints., • Inspect, examine, and test installed systems and pipelines using pressure gauges, hydrostatic testing, or other approved methods., • Ascend/descend stairwells frequently with or without tools and equipment., • Plan pipe system layout, installation, or repair according to specifications., • Read and understand blueprints and ISOs., • Demolish and install handrails and grating on platforms., • Verify all measurements and check for square and level before welding., • Hang and swing on vertical ropes to/from platform and boat (potential rough seas/wind)., • Ensure all fabricated items are tagged with the correct job number, customer name, and piece number., • Complete and inspect all weld passes., • Ensure 100% penetration on all pipe welds, including hydro-welds; structural welds must follow drawings unless otherwise specified., • Inspect all equipment (welding machine, leads, flux-core box, grinder, etc.) at the start of every shift., • Climb and work from heights as required.Qualifications, • High school diploma or equivalent preferred., • Minimum of 2 years offshore experience., • Recent offshore experience within the last 4 years., • Minimum of 2 years experience welding pipe and/or structural on carbon steel., • Ability to layout, fit, install, and assemble according to plans., • Familiarity with emergency response/escape and water survival procedures on offshore facilities.HSE Responsibilities, • Embrace, lead, and demonstrate “Acadian F.I.R.S.T.” – Vision & Mission Statement as fundamental core values., • Demonstrate visible leadership and support proactive safety processes (JSA, Time Out & TEAM BBS Observations) to achieve an incident-free workplace and advance our safety culture., • Adhere to all Health, Safety & Environmental (HSE) Management System policies, procedures, safe work practices, and client-specific regulatory requirements., • Make a personal commitment and be accountable for HSE results, driving toward the achievement of defined goals. Clearly communicate these goals through direct reports, while coaching, mentoring, and empowering others to achieve desired outcomes., • Conduct periodic quality assessments of HSE processes to enhance personal coaching and mentoring effectiveness and demonstrate ownership in the successful implementation of HSE programs.Requirements:

Job Description Position Summary We are seeking a skilled and dependable Welder to join TIPCO. In this role, you will weld, repair, and assemble metal components and structures used in our operations, ensuring all work meets safety, quality, and productivity standards. The ideal candidate has hands-on welding experience, strong attention to detail, and the ability to read blueprints and specifications to produce accurate, high-quality work in a fast-paced industrial environment. Key Responsibilities • Read and interpret blueprints, drawings, and work orders to determine material and welding requirements, • Set up, operate, and maintain welding equipment and related tools safely and effectively, • Perform MIG, TIG, stick, or other welding processes as required for production and repair work, • Inspect completed welds for accuracy, strength, and conformance to specifications; rework as needed, • Prepare materials by measuring, cutting, grinding, and cleaning surfaces for proper weld fit-up and finish, • Follow all safety procedures, use appropriate PPE, and maintain a clean and organized work area, • Collaborate closely with cross functional departments to ensure customer success including sales, warehouse, operations and general management, • Other duties as assigned Qualifications • High school diploma or equivalent required; technical or vocational welding training preferred, • Previous welding experience in a manufacturing, industrial, or fabrication environment preferred, • Ability to read blueprints, weld symbols, and technical specifications accurately, • Knowledge of welding techniques, materials, hand tools, and safety practices, with AWS certification a plus, • Ability to stand for extended periods, perform repetitive motions, and lift materials or equipment as needed Benefits and Compensation • Competitive compensation based on qualifications and experience, • Medical coverage, including employer-paid HDHP plan options, • Dental and vision coverage, • 401(k) plan, • Generous paid vacation and sick time, • Hybrid work schedule, • Company swag, • TIPCO Technologies participates in E-Verify

Job DescriptionReady to Master the Field? Join Transwest Mobile! At Transwest Mobile, we’re innovators and problem-solvers, delivering cutting-edge mobile repair solutions across Arizona, California, Nevada, Texas, and Utah. With over 25 years of trusted service, we keep contractors, municipalities, and fleet operators moving with minimal downtime. We’re seeking elite technicians with advanced skills and a passion for leadership to join our team. If you’re ready to tackle complex challenges, mentor others, and drive excellence, this is your opportunity! What You’ll Do • Lead advanced diagnostics and repairs on heavy-duty diesel engines, hydraulics, electrical systems (including CAN bus and ECM), as well as medium and light duty applications., • Perform engine overhauls, rebuilds, and complex repairs with precision and efficiency., • Utilize advanced diagnostic tools and service manuals to troubleshoot intricate issues., • Operate cranes and specialized equipment to support high-level maintenance tasks., • Mentor and train junior technicians, fostering a culture of excellence and collaboration., • Communicate expertly with customers, providing detailed diagnostics and service recommendations., • Maintain meticulous records of repairs and maintenance activities., • Drive process improvements and ensure compliance with safety and performance standards.What You Bring, • High school diploma or GED., • 5–10+ years of experience in heavy equipment, diesel, or hydraulic system repair., • Expert-level knowledge of electrical, hydraulic, and mechanical systems., • Proficiency in advanced diagnostics and complex repairs (e.g., CAN bus, ECM)., • Ability to supply a full set of professional tools suitable for the job., • Strong organizational skills and ability to work independently in high-pressure settings., • Valid driver’s license and ability to drive a company vehicle (mobile role)., • Ability to pass background checks., • Ability to lift 50+ pounds and work in indoor/outdoor environments.Preferred Qualifications, • Multiple ASE certifications, including T2 (Diesel Engines), T3 (Drive Train), T4 (Brakes), T5 (Suspension and Steering), T6 (Electrical/Electronic Systems), T7 (Heating, Ventilation, and A/C), and T8 (Preventive Maintenance) or Master Diesel Technician status., • Lead technician, supervisory, or shop management experience., • Proven expertise in field service or mobile repair., • Strong communication and customer-facing skills, with experience leading projects on job sites.Why Transwest Mobile?, • High-Impact Work: Lead complex repairs and keep critical fleets operational., • Leadership Opportunities: Mentor the next generation of technicians and shape our processes., • Elite Culture: Join a team that values expertise, innovation, and collaboration., • Top Benefits:- Health, Vision, and Dental Insurance- 401(k)- Life and Disability Insurance, • Paid Time Off and Holidays, • Referral Bonus Program, • Overtime opportunities based on performance, • On-the-job training, • Work boot allowance, • Company vehicle for mobile rolesAbout Us Since 2009, Transwest Mobile has redefined fleet productivity with innovative mobile repair services across Arizona, California, Nevada, Texas, and Utah. Our flawless safety record, $3M liability insurance, and 24/7 availability make us the trusted choice for field-ready repairs. Join us to drive efficiency, capability, and safety in every job. Ready to Lead? Apply now to join a team that values mastery and pushes the industry forward. Let’s keep fleets moving together! You should be proficient in: • Electrical Systems Diagnostics & Repair, • Transmission & Drivetrain Systems, • ASE Automobile and Light Truck Certification Tests, • Suspension and Steering, • Brakes, • Oil Changes, • Tire Service

Job DescriptionCome join our growing team in Corpus Christi, TX! Allegiance Crane & Equipment is seeking top-level mechanics to service mobile cranes & equipment in our Corpus Christi, TX location. Allegiance is a top employer for mechanics & technicians! Come join our growing, stable organization! Allegiance offers a great working environment with steady work. Strong team culture! Excellent benefits including medical, dental, vision, paid time off, 401k, and more. Pay is very competitive depending on experience. Qualified candidates apply online. Mechanic (Journeyman) • Diagnose and repair all types of company equipment, including but not limited to cranes, haul trucks, pickups and support equipment. History of working on different forms of mobile crane equipment, RTs, ATs, etc., • Work independently on all levels of repair processes including diagnostics, research, repair, testing and inspection., • Locate and develop technical support with various manufacturers as needed., • Locate and develop parts support, and differentiate parts to be outsource via third party for cost control measures., • Repair parts, weld, and operate equipment necessary as a part of the repair process.Requirements, • Min 5 years experience repairing and servicing cranes preferred, • Min 5 years experience with diesel and heavy equipment repair required, • Strong team playerPhysical Requirements Regularly required to sit, stand, reach, bend, stoop, and move about shop and equipment. Some heavy physical effort required. Must be able to lift up to 50 lb. Will regularly be exposed to noise, heat, dust, and fumes around repair facility. Extreme weather conditions possible, at times. Must be able to drive a vehicle for local travel. Competitive pay, based on experience. Ability to get a lot of hours. Allegiance Crane & Equipment is an EEO employer. Powered by JazzHR 5b4C5bgvnm

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241713

Job DescriptionResidential & Light Commercial HVAC | Leadership + Performance-Based CompensationLogicool Air Solutions is seeking an experienced HVAC Service Manager to take ownership of our rapidly growing Service Department in Corpus Christi, Texas, and surrounding areas.This is one of the most important leadership positions within our company and will work directly with the Owner to improve technician performance, customer experience, operational efficiency, revenue, and profitability.We are open to two types of candidates: • An experienced HVAC Service Manager with a proven track record of building and leading strong service teams, • A high-level HVAC technician, lead technician, or selling technician who is ready to move out of full-time production and into a leadership and management rolIf you are the technician other technicians call when they need help, understand how a service call should be run from beginning to end, know how to communicate with customers, and are ready to take responsibility for developing an entire team instead of just producing your own numbers, this may be your opportunity.This is not a position for someone who simply manages schedules and answers technician questions. We need a leader who will actively monitor performance, identify problems quickly, coach technicians, improve systems, and continuously push the Service Department toward greater efficiency and profitability.Pay Range:Objective Annual Compensation: $65,000–$150,000+Compensation will consist of:, • Competitive base salary., • Performance-based compensation tied directly to the profitability and performance of the Service Department., • Additional earning opportunities as department performance and company growth increase.This position is designed to reward results.As the Service Department becomes more productive, more efficient, and more profitable, your compensation has the ability to increase with it.Performance dictates earnings.For a high-performing individual who can successfully develop the department, this position offers significant long-term earning potential.Our Company:Logicool Air Solutions is a growing, customer-focused HVAC company committed to exceptional workmanship, operational excellence, accountability, and continuous improvement.We are actively building stronger systems, improving our technology, developing our employees, tracking performance, and creating advancement opportunities for people who are capable of taking on greater responsibility.We are looking for someone who wants more than another HVAC job.We want someone who wants to build and lead an exceptional Service Department.This May Be the Next Step in Your HVAC Career:You do not necessarily need to have spent years sitting behind a Service Manager's desk to be successful in this position.A highly experienced technician can be an excellent candidate if you have:, • Strong technical HVAC knowledge., • Natural leadership ability., • The respect of other technicians., • Strong customer communication skills., • The ability to teach instead of simply doing the work yourself., • An understanding of how technicians should perform in the field, • Strong personal accountability., • An interest in learning the operational and financial side of the business., • The desire to move beyond turning tools every day and into a long-term leadership career.For the right technician, this position can be the transition from being responsible for your own truck and your own production to becoming responsible for the performance of an entire department. Requirements: • Extensive residential HVAC service experience., • Strong HVAC diagnostic and technical knowledge., • Service management, field supervision, lead technician, or senior technician experience preferred., • Proven ability to communicate with and influence other technicians., • Ability to coach, train, and hold employees accountable., • Strong understanding of the complete residential HVAC service-call process., • Ability and willingness to learn departmental financials and KPIs., • Strong communication and organizational skills., • Ability to handle difficult customer and employee situations professionally., • Comfortable working in a fast-paced and evolving company., • Experience with HVAC CRM/service software preferred., • Housecall Pro experience is a plus., • Valid Driver's License., • Clean driving record and background., • Drug-free workplace. Responsibilities: • Oversee the daily operations and performance of the Service Department., • Monitor technicians throughout the day to ensure calls are being executed properly and efficiently., • Track technician productivity, revenue, average tickets, conversion rates, callbacks, and departmental KPIs., • Understand where revenue and profitability are being gained or lost., • Coach and develop technicians through training, ride-alongs, job reviews, and one-on-one discussions., • Ensure technicians follow company procedures for diagnostics, documentation, photographs, estimates, invoices, collections, and customer communication., • Improve technician technical ability, communication skills, efficiency, and ethical sales performance., • Monitor $0 calls, missed opportunities, estimates, repair conversions, memberships, accessory sales, and average ticket., • Review technician drive time, idle time, time on jobs, and overall productivity., • Identify underperformance quickly and establish corrective action when needed., • Review callbacks and determine the root cause to prevent repeat problems., • Maintain strong quality-control standards., • Support technicians with difficult diagnostics and technical situations., • Handle escalated customer concerns professionally., • Work with CSRs and dispatch personnel to ensure technicians are scheduled, dispatched, and supported effectively., • Help ensure the right technician is being placed on the right service call., • Improve departmental systems, processes, training, and accountability., • Report directly to the Owner regarding departmental performance, challenges, opportunities, and results. Your Job Is to Develop Technicians — Not Become Their Backup TechnicianThe Service Manager must be technically capable, but this is not intended to be a full-time production technician position.Your field time should primarily be used to: • Conduct technician ride-alongs., • Train technicians., • Coach performance., • Assist with difficult diagnostics., • Perform quality-control checks., • Reinforce company standards., • Develop struggling technicians., • Help technicians become more independent and capable. A major transition for a technician entering this role is understanding that your success is no longer measured primarily by what you personally produce. Your success will increasingly be measured by what your team produces.The goal is not to become the person every technician depends on.The goal is to develop a team of technicians who can consistently perform without needing constant assistance. You Must Know Your Numbers:Logicool Air Solutions is building a data-driven management culture.The Service Manager will be expected to understand and actively manage numbers including: • Service revenue., • Department profitability., • Revenue per technician., • Calls per technician., • Average ticket., • Estimate conversion., • Repair conversion., • $0 calls., • Membership sales., • Accessory sales., • Callbacks., • Technician productivity., • Drive time., • Customer reviews., • Documentation compliance., • Labor efficiency. You do not need to walk into the position knowing every financial metric on day one.You do need to have the ability and desire to learn them.We are looking for someone who wants to understand not only how to fix HVAC equipment, but how to operate a profitable HVAC Service Department. What We Offer: • Competitive base compensation., • Significant performance-based earning potential., • Compensation tied directly to the success of the department you lead, • Full health benefits., • Paid holidays., • Continuing education and management development., • Direct access to and mentorship from company ownership., • Opportunity to transition from field technician into senior leadership., • Ability to influence company systems and operations., • Major advancement opportunities as Logicool Air Solutions grows., • Opportunity to build, develop, and lead your own high-performing service team. The Person We Want • We are looking for someone who takes ownership., • Someone who sees a technician struggling and wants to make them better., • Someone who sees an inefficient process and wants to fix it., • Someone who understands that technical ability alone does not create a great Service Department. You must be able to determine: • Who is performing?, • Who needs help?, • Where are we losing money?, • Where are opportunities being missed?, • Are our technicians giving customers the experience we expect?, • What needs to change?, • How do we make the team better tomorrow than it was today?, • If you are already an experienced Service Manager, we want to hear about the departments you have led and the results you have produced., • If you are a high-performing senior technician who knows you are capable of more than running service calls for the rest of your career, we want to hear from you too. This could be your opportunity to move from technician to leader, learn the business side of HVAC, build your own department, and significantly increase your long-term earning potential.Apply today and come prepared to discuss what you have accomplished, the technicians you have helped develop, and what you believe a high-performing HVAC Service Department should look like.

Job DescriptionOne Hour Heating & Air Conditioning of Corpus Christi, an affiliate of Authority Brands, has been the premier heating and cooling provider in the area for almost 40 years. Were excited to announce that were officially under NEW management and looking to add experienced HVAC Service Technicians to our team. Theres never been a better time to join us! What can joining the One Hour team offer you? • Competitive hourly pay plus commission on ALL products and services sold., • Flexible work schedules and no on-call requirements!, • Top-of-the-industry benefits including health, dental, and vision insurance, generous PTO and personal days, parental leave, 401k with company match, and more!Responsibilities:, • Assess HVAC systems to determine repair or replacement recommendations., • Effectively communicate these recommendations to customers., • Perform services and repairs with a focus on technical excellence., • Test each system after service or repair has been completed., • Perform a proper inspection of the system., • Effectively explain all services and repairs performed to customers., • Accurately complete all paperwork and invoices., • Provide customer leads to sales team.Qualifications:, • 5 years of verifiable HVAC service experience required., • EPA Type 1 and 2 required., • NATE certification preferred., • Strong communication and customer service skills a must!, • High school diploma or GED required., • Must have valid driver's license and clean driving record., • Must be able to pass a background check and drug screen.Authority Brands conducts drug screens and background checks on applicants who accept employment offers. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions; however, we do not sponsor visas at this time. Authority Brands is an Equal Opportunity Employer.

Job Description Synergy Preserve LLC has a wide range of experience when it comes to renovating and maintenance. We specialize in property management and facility maintenance for residential and commercial properties. We are looking for some dynamic technicians who will represent Synergy Preserve LLC to its clients and customers and provide better service in the field. Overview We are seeking a skilled HVAC Technician to join our dynamic team. The ideal candidate will possess a strong mechanical aptitude and a passion for providing exceptional service in the heating, ventilation, and air conditioning industry. This role involves working on various HVAC systems, performing maintenance, repairs, and installations to ensure optimal performance and customer satisfaction. Qualifications • Must be experienced., • Minimum 2 years experience in HVAC, Appliance repair work, • Own tools and reliable vehicle (truck, van, or SUV), • Must complete a short onboarding interview., • Valid driver’s license and ability to work independently, • MUST be located in the USRequirement, • Technicians who want routine maintenance work, not full-time employment, • Tradespeople who are self-motivated, communicative, and ready to handle straightforward tasks across rotating properties., • Appliance Repair (Microwave, Dishwasher, Store), • EPA Certification for HVAC techs (mandatory under new refrigerant regulations), • Must complete brief onboarding with vendor representative before receiving work, • Strong professionalism, punctuality, and communication skills., • Need to have necessary job tools.Benefits, • Pay: $25.00 - $50.00 per hour., • Opportunity to be a Full-time employer., • Flexible Schedule: Accept jobs that fit your availability, • Local Work: All assignments are dispatched based on your coverage area, • Fast Pay: Get paid every Monday for your labor hour (materials will be purchased by company) Responsibilities • Perform general maintenance and repairs in various areas such as plumbing, electrical, carpentry, and HVAC, • Conduct routine inspections of facilities and equipment to identify any issues or potential problems, • Respond to work orders and prioritize tasks based on urgency and importance, • Fabricate or repair equipment as needed, • Supervise and coordinate external contractors for specialized repairs or projects, • Provide excellent customer service by addressing inquiries and resolving maintenance-related issues promptly, • Experience:- Proven experience in facilities maintenance or a similar role., • Strong mechanical knowledge and proficiency in various trades (plumbing, electrical, HVAC), • Ability to read and interpret schematics and technical manuals, • Welding experience is a plus point., • Excellent communication skills in English, both verbal and written, • Ability to work independently with minimal supervision, • Strong problem-solving skills and attention to detail, • Ability to prioritize tasks and manage time effectively Note This job description is not intended to be all-inclusive. The employee may be required to perform other related duties as assigned to meet the ongoing needs of the organization. If you are a skilled Handyman looking for a challenging opportunity with room for growth, we invite you to apply. We offer competitive compensation, benefits, and a supportive work environment. Join our team today! Powered by JazzHR LELxMxYWM1

Job Description Commercial HVAC Service Technician H and G Systems | Corpus Christi, TX$30–$45/Hour + Take-Home Vehicle | Full-Time, Year-Round Commercial-only work with dispatch straight from home — no residential sales, no chasing your own schedule. Service hospitals, data centers, manufacturing facilities, and more with a trusted North Texas mechanical contractor since 1968. Top Perks • $30–$45/hr based on experience, • Take-home vehicle, dispatched from home, • 90% employer-paid medical insurance, • 401(k) with 6% match, • PTO + 8 paid holidays, • Tuition/book reimbursement for continued training, • Relocation assistance available What You'll Do • Diagnose, repair, and maintain commercial HVAC systems, • Troubleshoot electrical, mechanical, refrigeration, and control issues, • Perform start-ups, commissioning support, and warranty work, • Read schematics/blueprints and complete digital service reports, • Build strong, long-term customer relationships Schedule: Monday–Friday, 7:00 AM–5:30 PM (occasional evenings/weekends/OT) What You Need • 5+ years commercial HVAC experience preferred (residential techs welcome to apply), • Experience with rooftop units, split systems, and package units, • Ability to climb ladders, lift 50 lbs, and operate scissor/aerial lifts, • Valid driver's license, insurable record Dispatch from home, work diverse commercial facilities, skip residential sales — apply today for a confidential conversation.

Job Description As part of the Crete United family, Pro Tech Mechanical has proudly served South Texas since 2000. What began as a commercial HVAC service company has grown into a full-service MEP mechanical contractor focused on making buildings more efficient, comfortable, and sustainable. We’re looking for an experienced Commercial HVAC Service Technician who enjoys solving problems, takes pride in quality work, and wants steady, year-round employment with a supportive team. If you’re ready to bring your technical skills to a company that values its technicians, we’d like to meet you. Position Summary As a Commercial HVAC Service Technician, you’ll diagnose, repair, and maintain commercial HVAC equipment for customers throughout the area. You’ll handle complex service work, support larger projects, and serve as a trusted technical resource for customers and other technicians. What You’ll Do • Diagnose, service, repair, and maintain commercial HVAC systems, • Troubleshoot equipment and complete planned maintenance, • Perform work related to service agreements, quoted projects, and demand-service calls, • Clearly explain findings, recommendations, and completed work to customers, • Support and mentor less-experienced technicians, • Coordinate materials, parts, subcontractors, and workflow for larger projects, • Document job progress using mobile service and reporting software, • Follow company safety standards and fleet requirements What We’re Looking For • Five or more years of commercial HVAC service experience; seven or more years preferred, • High school diploma or GED, • Applicable licenses, registrations, and certifications, • Strong troubleshooting and problem-solving skills, • Ability to work independently and make sound technical decisions, • Professional, customer-focused communication, • Willingness to help and mentor other technicians Technical Experience We’re especially interested in technicians with experience in several of the following areas: • Split, mini-split, and multi-zone systems, • VRV/VRF heat-pump and heat-recovery systems, • Large commercial rooftop units, • Water-source heat pumps, • Self-contained and CRAC systems, including Liebert, Data-Aire, and Stulz, • Air-cooled and water-cooled chilled-water systems, • Building automation systems and OEM diagnostic software, • Reading and interpreting schematics and blueprints You do not need experience with every system listed to be considered. We encourage you to apply if you have a strong commercial HVAC foundation and are interested in continuing to grow your technical expertise. What You’ll Get • Steady, year-round work, • Company-paid uniforms, • Paid time off and paid holidays, • Medical, dental, and vision insurance, • 401(k) with company match, • Ongoing training and career-growth opportunities, • A team that values safety, craftsmanship, and supporting one another Work Environment This is a hands-on field position involving indoor and outdoor work in varying weather and jobsite conditions. Technicians may be required to climb ladders, work at heights, kneel, crawl, lift equipment and materials, and meet applicable respiratory-protection and safety requirements. Reasonable accommodations may be available for qualified individuals. Build the future with Protech! A Crete United company Equal Opportunity Employer Pro Tech Mechanical and Crete United are committed to inclusive hiring and encourage applications from all backgrounds—including race, gender identity, sexual orientation, disability, and veteran status.

Job DescriptionBuild Your Career with ProTech Mechanical Are you an experienced commercial plumber looking for steady work, a supportive team, and a better work-life balance? ProTech Mechanical, a Crete United company, is growing and looking for a licensed Journeyman or Master Plumber to join our Corpus Christi team. In this role, you’ll provide commercial plumbing service, maintenance, repairs, and installation support. You’ll work directly with customers to diagnose issues, explain practical solutions, and complete high-quality work safely and professionally. What You’ll Do • Diagnose, repair, and maintain commercial plumbing and drainage systems., • Respond to scheduled service calls and plumbing emergencies., • Install and repair pipes, valves, fittings, fixtures, and related equipment., • Perform routine inspections and identify potential plumbing issues., • Complete camera inspections, sewer-line locating, and sanitary-line cleaning or jetting., • Support construction projects, punch-list work, and warranty calls as needed., • Read blueprints and use lasers, transits, locators, and other trade-specific tools., • Operate excavation equipment when required and properly trained., • Review installations with project management and communicate areas of concern., • Gather field information, labor needs, and material requirements for quoted work., • Present customers with clear repair or replacement options without recommending unnecessary services., • Complete service reports and other documentation using company-provided technology., • Maintain an organized, clean, and properly stocked company vehicle., • Follow all company and site-specific safety requirements., • Work collaboratively with customers, field teams, and project leadership.What We’re Looking For, • At least five years of commercial plumbing service experience., • Active Texas Journeyman Plumber or Master Plumber license through TSBPE., • Valid Texas driver’s license and an acceptable driving record., • Strong troubleshooting and customer-service skills., • Ability to manage time, priorities, and multiple service assignments., • Comfortable working independently and as part of a team., • Backflow Prevention Assembly Tester certification is a plus. If you take pride in your work, enjoy solving problems, and want to grow with a team that values safety, integrity, and quality, we’d like to hear from you.

Job DescriptionBenefits: • Dental insurance, • Training & development, • Vision insurance, • 401(k), • 401(k) matching, • Health insurance Role Objectives: Must work 14/7 (liveaboard) schedule and be willing to travel as needed. The role of vessel deckhand is to assist the Captain and crew in the safe, timely, efficient, and orderly operation of the company’s vessel. The vessel deckhand must be familiar with the dedicated to the passenger safety policy. Work as a team to ensure that all cargo and passenger deliveries are completed safely and in a timely manner. Performs a variety of operations involving rigging cargo for crane lifts and maintenance tasks to preserve the painted surface of the ship and to maintain line and ship equipment. The deckhand will participate in cooking and cleaning as assigned by the captain. Required to report all accidents/incidents, to vessel Captain Key Responsibilities: • Handle lines to moor vessels to wharfs, to tie up vessels to other vessels, or to rig towing lines., • Maintenance of vessels: cleaning, painting, scraping, assist with engine maintenance/repairs, and fueling., • Participate in safety training and drills., • Assist in emergency situations as required by captain., • Stand watch in ships' bows or bridge wings to look for obstructions in a ship's path or to locate, • navigational aids such as buoys and channel markers., • Chip and clean rust spots on decks, superstructures, and hull., • Assist in loading/offloading cargo., • Deploy/Recover spill boom equipment., • Sweep, mop, and wash down decks to remove oil, dirt, and debris., • Break out, rig, overhaul, and store cargo-handling gear, stationary rigging, and running gear., • Load or unload materials from vessels to include stores, water, fuel and lubricants., • Operate, maintain, and repair ship equipment such as winches, cranes, and anchor., • Other duties and special projects as assigned. Knowledge/Skill Requirements:, • Valid Driver’s License., • Valid Transportation Worker ID Card (TWIC.), • Effectively communicate both orally and in writing, • Ability to identify a problem/potential problem Education/Experience:, • High School Diploma (or GED or High School Equivalence Certificate), • 1-2 years of related experience required, • Ability to obtain a MMC and USCG Medical Certificate, • Rigging Physical Requirements: • Ability exert up to 100 pounds of force occasionally, up to 50 pounds of force frequently and up to 20 pounds of force constantly., • Ability to climb stairs/ladders., • Ability to Stand for Extended Periods., • Operate motor vehicles., • Wear personal protective equipment, including but not limited to hard hat, steel-toed safety shoes, hearing protection, respirators, safety glasses, goggles and full body coveralls., • Ability to work around moving machinery., • Ability to perform under stress, under pressure, and/or in emergency situations., • Ability to work in adverse weather conditions (Cold or Heat)., • Ability to comprehend, remember, and follow verbal and written directions and comply with Company policies, procedures and standards., • Ability to work at heights (scaffolding or ladders)., • Ability to work in noisy environments., • Ability to work as a team, communicate and interact with others in a professional manner, and consider alternative and diverse perspectives., • Requires hearing, talking, grasping quickly, climbing, balancing, stooping, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, and crawling., • The worker is subject to environmental conditions with no protection from the weather., • The worker is subject to noise, vibration, hazards, and is frequently in close quarters and small enclosed rooms and is required to function in narrow aisles or passageways. Working Conditions: • Requires working on or near moving equipment and vibrating equipment., • Work near others, usually within a few feet., • Outdoors and indoors, day and night, as well as over/near water., • Frequently the humidity is above 90%, noise is over 85 decibels, and the light is intense/glare., • Potential exposure to open fire/flames/sparks., • Constant exposure to airborne dust, fumes, and gases., • Work surface is stable, height is elevated., • Worker is subject to environmental conditions both inside and outside, with no effective protection from weather, with sufficient noise to cause the worker to shout to be heard, and to physical hazards, such as moving parts, vehicles, electricity, heights, and large bodies of deep water

Job Description Synergy Preserve LLC has strong experience in renovation and property maintenance. We provide services for both residential and commercial properties. Responsibilities • Established subcontractor technician with experience in commercial and residential roofing systems (single-ply, TPO, PVC, EPDM, metal, tile, slate, shingles, etc.)., • Conduct routine inspections of facilities and equipment to identify any issues or potential problems., • Respond to work orders and prioritize tasks based on urgency and importance., • Fabricate or repair equipment as needed Supervise and coordinate external contractors for specialized repairs or projects., • Provide excellent customer service by addressing inquiries and resolving maintenance related issues promptly.Experience, • Proven experience in facilities maintenance or a similar role., • Crews equipped with their own tools, ladders, and safety equipment, • Subcontractors should carry insurance in accordance with Baker requirements, • Ability to read plans and shop drawings, • Crews experienced working with man lifts, Skytrack, and scaffolding, • Commitment to safe work practices and OSHA standards, • Ability to submit weekly invoices for work completed the prior week, • Ability to read and interpret schematics and technical manuals Welding experience is a plus., • Excellent communication skills in English, both verbal and written., • Ability to work independently with minimal supervision., • Strong problem-solving skills and attention to detail., • Ability to prioritize tasks and manage time effectively. Note This job description is not intended to be all-inclusive. The employee may be required to perform other related duties as assigned to meet the ongoing needs of the organization. If you are a skilled Handyman looking for a challenging opportunity with room for growth, we invite you to apply. We offer competitive compensation, benefits, and a supportive work environment. Join our team today! Powered by JazzHR lCo0fCtLeu

Job Description Construction laborers work on construction project sites where they perform various physical tasks. Generally, the duties performed by construction laborers are shown in the job description example below: • Clear the construction area and prepare it for the commencement of construction work, • Safely pack and store work materials as directed by the site supervisor, • Responsible for mixing and pumping concrete, sand and grout, • Responsible for erecting and dismantling scaffolds and barricades, • Assist in loading, and unloading of construction materials, • Assist in the purchase of minor construction materials like tap, binding wires, and twine, • Handle construction machines such as forklifts, • Repair and maintain construction tools and equipment, • Clear debris and tree stumps. Perform other duties as necessary. Requirements and Skills Below are the major skills, abilities, and knowledge that we expect candidates for the construction laborer job to possess to be considered for an interview appointment: • Education: may not be educated but must have the ability to understand written and verbal instructions is important. He/she must be willing and ready to learn new ways of handling construction tasks., • Communication: must be able to understand written and verbal instructions and must be willing to adhere to plans and directives., • Health & Safety: applicants will be required to obtain health and safety certifications to be hired.

ResCare Community Living, a part of the Sevita family, provides quality services that empower individuals, enhance independence, and help people live well. Since 1974, we’ve supported individuals with intellectual and developmental disabilities to live more independently at home and in their community. With our dedicated team and experienced staff, we provide person-centered services that help people build skills, overcome challenges, and reach their full potential. • Position Type: Non-exempt, full-time or part-time, hourly role., • Scope of Role:, • Responsible for providing direct support within a single program or unit within a program, typically supporting 4 - 6 individuals in residential settings, or up to 10 individuals in periodic programs., • Key Responsibilities:, • Deliver support per individual service/program plans, including socialization, health maintenance, medication administration, skill/behavioral development., • Assist with daily activities: Personal care, housekeeping, recreational activities, transportation, community integration, shopping, citizenship, and other activities of daily living. ESSENTIAL JOB FUNCTIONS To perform this job successfully, an individual must be able to satisfactorily perform each essential function listed below. • Direct Support: Provides direct support or assistance in accordance with individual service or program plans; assists with socialization and behavioral development, personal care, housekeeping, recreational activities, transportation, community orientation, shopping, financial management, citizenship, and other activities of daily living., • Records: Accurately documents progress and activity; reviews records and logs to stay abreast of changes in service plans; maintains confidentiality., • Management of Individuals’ Assets: Makes cost-effective and appropriate purchases within the budget of the individual served and according to their choice / preference, • Relationships: Maintains healthy and professional relationships with individuals, friends, families, guardians and case managers; greets family members and other visitors; implements Sevita Customer Service Standards., • Reporting: Reports any instance of alleged abuse or neglect according to internal and external standards; reports medical, behavioral and other incidents in accordance with Sevita policy and external requirements., • Rights: Maintains confidentiality, respects the rights of persons being served, according to applicable the bill of rights; practices universal precautions; assists individuals in exercising their rights., • Appointments: As needed, may accompany individuals to medical appointments; relays orders and information to and from medical providers as required., • Medications: If assigned, accurately administers or supports self-administration of medication and documents delivery of medications and treatments; promptly reports administration errors; maintains appropriate security of controlled medications and other medications and supplies., • General Health Care: Monitors individual’s health; documents health concerns; communicates with nurse or supervisor as appropriate; calls 911 in the event of emergency; follows individual health care directives., • Medical Supplies and Equipment: Correctly follows procedures in utilizing medical equipment; reports malfunction or disrepair., • Meal Preparation: Prepares or supports individuals to prepare food in accordance with planned menus and individual choice; knows special diets and prepares individual meals accordingly; monitors mealtime and correctly implements any dining plans., • Training: Attends orientation and on-going training as directed; participates in monthly staff meetings., • Employee Scheduling: Works scheduled hours; arrives for work on time; stays on shift until replacement arrives; notifies supervisor in advance when unable to work as scheduled or as soon as possible after the designated start time; may fill in for other shifts where required without causing unapproved overtime, or in the event of emergency., • Teamwork: Works together with others, values others contributions; is courteous; communicates openly; listens; and shows respect to others., • Workplace Safety: Every employee plays a role in developing and maintaining a safe workplace; complies with all established safety policies, procedures, and rules; reports unsafe hazards to their supervisor and participates in safety related training or activities., • Vehicles: May transport individuals into the community; drives safely and according to local laws; ensures proper use of safety equipment including seat belts, lifts and wheelchair ties; reports accidents to appropriate authorities immediately; reports accidents and safety concerns immediately to supervisor or maintenance personnel., • Housekeeping: Performs daily and seasonal housekeeping as directed; maintains neat, clean and safe environment; reports hazards or safety concerns., • Maintenance and Repair: Monitors environmental safety and may make minor repairs, change light bulbs, etc.; may perform yard maintenance including keeping walkways safe and snow removal; reports equipment or facilities requiring repairs to supervisor or maintenance personnel as required., • Safety: Checks water temperature as required when assisting with bathing; participates in safety drills and protects persons being served in the event of emergency., • Performs other duties and activities as required., • MPA = Mobile Punch Authorized for timekeeping. SUPERVISORY RESPONSIBILITIES • None Minimum Knowledge and Skills required for the Job The requirements listed below are representative of the knowledge, skill, and/or abilities required to perform the job. Education and Experience: • High school diploma or equivalent preferred, • Six months of experience in human services preferred., • Must be 18 years of age., • Working knowledge of computers Certificates, Licenses, and Registrations: • Valid driver’s license in good standing., • Car registration and vehicle insurance if providing transportation for individuals receiving services., • All state-required training(s) and certification(s) completed in mandated timeframes., • Maintain valid driver’s license, meet all insurance requirements, and be approved by management to be a driver for the company. If an employee is determined to have lost their driving privileges by failing the company MVR driving record requirements per company policy, the employee will be required to sign a Non-Driver form and restricted from driving on behalf of the company until their MVR report satisfies the company requirements for a good driving record., • Works at the program location and may accompany individuals into the community. Physical Requirements: • Heavy Work. Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects., • CS New Jersey – Refer to: CS NJ Addendum – Direct Support Professional 1001 MPA 3429, • Employees must cooperate with the licensee and Department of Human Services staff in any inspection, inquiry, or investigation., • Must have a valid driver’s license in good standing in The State of New Jersey; however, in the event the person lives in another state and is commuting, they must have a valid driver’s license in good standing for the state in which they live., • At minimum, a High School Diploma/Equivalent is required, • All employees hired after 6/15/2018 shall submit to drug testing prior to employment. All employees shall submit to drug testing randomly and for cause/suspicion., • Employees must submit to criminal background checks, and be determined not to be disqualified by the Department of Human Services prior to working with individuals served. In addition to this, it is a requirement that all employees agree to have their name checked against the Central Registry of Offenders Against Individuals with Developmental Disabilities, as well as completing an application to have their name checked against the Child Abuse Registry Information (CARI)., • Employees must successfully complete and demonstrate proficiency in all areas of required trainings., • Shall be at least 18 years of age. Sevita is a leading provider of home and community-based specialized health care. We believe that everyone deserves to live a full, more independent life. We provide people with quality services and individualized supports that lead to growth and independence, regardless of the physical, intellectual, or behavioral challenges they face. We’ve made this our mission for more than 50 years. And today, our 40,000 team members continue to innovate and enhance care for the 50,000 individuals we serve all over the U.S. As an equal opportunity employer, we do not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, citizenship, or any other characteristic protected by law.

ResCare Community Living, a part of the Sevita family, provides quality services that empower individuals, enhance independence, and help people live well. Since 1974, we’ve supported individuals with intellectual and developmental disabilities to live more independently at home and in their community. With our dedicated team and experienced staff, we provide person-centered services that help people build skills, overcome challenges, and reach their full potential. SUMMARY The Day Program Manager is responsible to manage the services delivered to a designated program or set of programs, and the operation of programs including organization and implementation of direct supports, person-centered planning and implementation, health care, advocacy, stakeholder relations, regulatory compliance, staffing, training, financial management and maintenance of the physical environment. ESSENTIAL JOB FUNCTIONS To perform this job successfully, an individual must be able to satisfactorily perform each essential function listed below. Staff Management: Oversees implementation of human resource practices including recruitment, retention, training, scheduling, processing, record keeping, and management of program employees; 1. Recruitment & Hiring: • Participates in the recruitment and interviewing of all staff; • Hires direct staff members in consultation with the PM’s manager; and approves the hiring of direct support professionals and other indirect staff members. 2. Meetings & Training: • Organizes and implements on-site orientation and training for assigned programs; and monitors training compliance and documentation. • Conducts monthly staff meetings; attends monthly regional meetings. 3. Employee Scheduling: • Designs and monitors schedules to assure that all shifts are covered; • Monitors and minimizes overtime. 4. Performance Evaluation: • Conducts annual performance evaluations for direct reports in consultation with the PM’s manager; • Reviews and approves annual Direct Support Professional and other staff member’s performance evaluations. 5. Coaching, Discipline and Termination: • Coaches employees, correcting or directing employee behavior where required; • May remove employees in the event of emergency; • May recommend and participate in decisions regarding discipline and termination in consultation with the PM’s manager and Human Resources; • Manages the termination of Direct Support Professionals or other staff members as necessary; 6. Employee Safety: • Responsible for employee safety and workers’ compensation programs; • Monitors compliance; and assists in returning employees to work; • Implements, oversees, and trains employees about safety. Program Management: Manages the implementation of program planning; monitors delivery of services and supports; ensures services are consistent, engaging and relevant to the individuals served. 1. Program Planning: • Writes and approves individual program plans (as appropriate); • Trains and assists appropriate staff members with implementation of plans across all shifts. 2. Records: • Periodically audits individual records and other program documentation for accuracy and completion. 3. Program Team Meetings: • Conducts progress meetings and (quarterly, annual and/or other) reviews as appropriate or determined by the interdisciplinary team; • Provides and approves written and progress reviews. 4. Compliance: • Oversees licensing compliance for program services and supports; • Ensures timely and accurate program documentation; • Implements the Network compliance plan; and manages individual rights implementation. 5. Management of Individuals’ Assets: • Implements system and oversees management of individual’s funds and property, assuring safety and accuracy; audits, monitors and reviews individual’s financial accounts (as applicable) 6. Stakeholder Relations: • Maintains productive and professional relations with individuals, families, case managers and other stakeholders; • Provides regular communication to stakeholders; and acts as point of contact for all stakeholders; • Implements satisfaction improvement plans. 7. Incidents: • Implements proactive strategies to reduce or eliminate serious incidents; • Takes immediate steps to correct potential safety concerns and limit the potential for continued concern or incident; • Reviews all incidents and directs appropriate response; ensures timely incident reporting; and signs and submits all incident reports as required. Health Care: Oversees implementation of individual health care while in Day Program’s care; implements strategies to limit illness or serious incident; oversees and reviews health care documentation. 1. Medications: • Oversees system for medication administration, documentation and security; • Reviews documentation for accuracy and completeness; • Assures all applicable employees are certified or trained in medication administration. 2. Medical Supplies and Equipment: • Approves purchases of medical supplies and equipment; and ensures training on proper use to all employees. 3. Dietary planning: • Monitors food service in accordance with dietary plans and to meet regulatory compliance; • Ensures consideration for special needs, occasions and individual choice. Finance: Responsible for the financial performance of the program, from billing to staff budgets, as well as reviewing and approving purchases 1. Purchasing: • Approves purchase of food, supplies and equipment; and reviews and monitors monthly invoices for accuracy and budgetary compliance. • Attests to company credit card statements and monthly invoices in accordance with company policy. 2. Billing and utilization: • Oversees census, attendance information or other required documentation to assure accurate billing; • Monitors utilization between authorization and provision of services and supports. 3. Staffing: • Monitors staffing hours for budgetary compliance. 4. Growth: • Maximizes census, average daily attendance and utilization. Maintenance: Oversees the maintenance and cleanliness of the program’s facilities and vehicles. 1. Vehicles: • Ensures vehicles are properly maintained, clean, and safe by consulting with maintenance personnel; • Implements training procedures for maintenance and safe operation of company-owned vehicles; • Addresses known safety concerns with employee vehicles or other means of transportation, for the safe transport of individuals. 2. Housekeeping: • Monitors and implements strategies to assure neat, clean, and safe program environments (internal and external); • Ensures age appropriate and esthetic decoration. 3. Maintenance and Repair: • Oversees environmental safety program; establishes preventive maintenance schedule; maintains furnishings, equipment and facilities in good repair and compliant with regulatory standards. Other: • Attends monthly regional meetings and additional meetings as needed • Performs other related duties and activities as required. SUPERVISORY RESPONSIBILITIES • Manages the direct or indirect staff members of the program including performance evaluations, scheduling, orientation, and training. Makes recommendations and/or decisions on employee hires, transfers, promotions, salary changes, discipline, terminations, and similar actions. Resolves employee problems within position responsibilities. Minimum Knowledge and Skills required by the Job The requirements listed below are representative of the knowledge, skill, and/or abilities required to perform the job. Education and Experience: • Bachelor's degree and two to three years of related experience in the Human Services Industry preferred. • An equivalent combination of education and experience which provides proficiency in the areas of responsibility listed above may be substituted for the above education and experience requirements. • Other education and experience as required by applicable regulations. Certificates, Licenses, and Registrations: • Current driver's license, car registration and auto insurance if driving on the behalf of the Company or providing transportation to individuals receiving services. • Licensure as required by state. • Medication Management Certificate issued with the completion of Company provided training. • Mandatory Reporter Certificate issued with the completion of Company provided training • Other training and/or certification per state requirements and/or service line. Other Skills and Abilities: Other Requirements: • Travel as needed Physical Requirements: • Medium Work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. AMERICANS WITH DISABILITIES STATEMENT External and internal applicants, as well as position incumbents who become disabled, must be able to perform the essential job functions either unaided or with assistance of a reasonable accommodations to be determined on a case by case basis via the interactive process. Sevita is a leading provider of home and community-based specialized health care. We believe that everyone deserves to live a full, more independent life. We provide people with quality services and individualized supports that lead to growth and independence, regardless of the physical, intellectual, or behavioral challenges they face. We’ve made this our mission for more than 50 years. And today, our 40,000 team members continue to innovate and enhance care for the 50,000 individuals we serve all over the U.S. As an equal opportunity employer, we do not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, citizenship, or any other characteristic protected by law.

Job Description Job Title: Experienced HVAC/Refrigeration Technician Location: [RIO GRANDE VALLEY, LAREDO, CORPUS CHRISTI, SAN ANTONIO AREA] Job Type: Full-Time About Us: We are a well-established HVAC and Refrigeration service company, specializing in both commercial and residential services. We are currently looking to expand our team by hiring an experienced HVAC/Refrigeration Technician with a strong background in installation, maintenance, and repair of air conditioning and refrigeration systems. Position Overview: We are seeking a highly skilled and dedicated HVAC/Refrigeration Technician with a minimum of 3 years of hands-on experience to join our team. The ideal candidate will have expertise in the installation, maintenance, and repair of various air conditioning and refrigeration equipment, including both hot-side and cold-side kitchen systems. This role involves diagnosing and solving equipment problems, performing repairs, conducting warranty services, and executing emergency repairs when needed. Key Responsibilities: • Locate and diagnose problems with HVAC and refrigeration equipment., • Perform timely and effective repairs to solve equipment issues., • Conduct installation, maintenance, and repairs of air conditioning and refrigeration systems, including kitchen equipment (hot-side/cold-side).Provide warranty services for equipment as needed., • Respond quickly to emergency repair requests for commercial and residential systems., • Ensure compliance with safety and industry standards during service delivery., • Maintain accurate records of services performed and parts used., • Provide excellent customer service while on-site and represent the company professionally., • Be available for on-call duties during nights and weekends as necessary. Qualifications: • Minimum of 5+ years of experience as Senior HVAC/Refrigeration Technician with a focus on installation and repair., • Experience working with various HVAC and Refrigeration systems, including hot-side and cold-side kitchen equipment., • Strong diagnostic and troubleshooting skills., • Knowledge of safety regulations and best practices in the HVAC industry., • Ability to work independently and handle emergency repair situations efficiently., • Must be able to work on-call, including nights and weekends., • Valid driver’s license and reliable transportation., • EPA Certification is a plus. What We Offer: • Competitive pay based on experience., • Health benefits., • Company vehicle (depending on position)., • Opportunities for career growth and advancement., • A dynamic and supportive team environment. If you are a motivated and skilled HVAC/Refrigeration Technician looking for a challenging and rewarding position, we encourage you to apply Job Type: Full-time Pay: $15.00 - $45.00 per hour Expected hours: 35 – 80 per week Benefits: • 401(k), • 401(k) matching, • Company truck, • Dental insurance, • Employee discount, • Flexible spending account, • Fuel card, • Health insurance, • Life insurance, • Paid time off, • Retirement plan, • Vision insurance Schedule: • Monday to Friday, • On call, • Weekends as needed Supplemental Pay: • Tips Education: • Associate (Required) Experience: • HVAC/Refrigeration: 3 years (Required) License/Certification: • EPA Type II Drivers License Nate (Required), • Driver's License (Required) Willingness to travel: • 100% (Required) Work Location: Multiple locations Company DescriptionAt Polar Air, we specialize in everything HVAC—from residential and commercial air-conditioning to walk-in coolers, freezers, and restaurant hot-side equipmentAt Polar Air, we specialize in everything HVAC—from residential and commercial air-conditioning to walk-in coolers, freezers, and restaurant hot-side equipment

Job Description Job Title: Experienced HVAC/Refrigeration Technician Location: [RIO GRANDE VALLEY, LAREDO, CORPUS CHRISTI, SAN ANTONIO AREA] Job Type: Full-Time About Us: We are a well-established HVAC and Refrigeration service company, specializing in both commercial and residential services. We are currently looking to expand our team by hiring an experienced HVAC/Refrigeration Technician with a strong background in installation, maintenance, and repair of air conditioning and refrigeration systems. Position Overview: We are seeking a highly skilled and dedicated HVAC/Refrigeration Technician with a minimum of 3 years of hands-on experience to join our team. The ideal candidate will have expertise in the installation, maintenance, and repair of various air conditioning and refrigeration equipment, including both hot-side and cold-side kitchen systems. This role involves diagnosing and solving equipment problems, performing repairs, conducting warranty services, and executing emergency repairs when needed. Key Responsibilities: • Locate and diagnose problems with HVAC and refrigeration equipment., • Perform timely and effective repairs to solve equipment issues., • Conduct installation, maintenance, and repairs of air conditioning and refrigeration systems, including kitchen equipment (hot-side/cold-side).Provide warranty services for equipment as needed., • Respond quickly to emergency repair requests for commercial and residential systems., • Ensure compliance with safety and industry standards during service delivery., • Maintain accurate records of services performed and parts used., • Provide excellent customer service while on-site and represent the company professionally., • Be available for on-call duties during nights and weekends as necessary. Qualifications: • Minimum of 3 years of experience as an HVAC/Refrigeration Technician with a focus on installation and repair., • Experience working with various HVAC and refrigeration systems, including hot-side and cold-side kitchen equipment., • Strong diagnostic and troubleshooting skills., • Knowledge of safety regulations and best practices in the HVAC industry., • Ability to work independently and handle emergency repair situations efficiently., • Must be able to work on-call, including nights and weekends., • Valid driver’s license and reliable transportation., • EPA Certification is a plus. What We Offer: • Competitive pay based on experience., • Health benefits., • Company vehicle (depending on position)., • Opportunities for career growth and advancement., • A dynamic and supportive team environment. If you are a motivated and skilled HVAC/Refrigeration Technician looking for a challenging and rewarding position, we encourage you to apply Job Type: Full-time Pay: $15.00 - $45.00 per hour Expected hours: 35 – 80 per week Benefits: • 401(k), • 401(k) matching, • Company truck, • Dental insurance, • Employee discount, • Flexible spending account, • Fuel card, • Health insurance, • Life insurance, • Paid time off, • Retirement plan, • Vision insurance Schedule: • Monday to Friday, • On call, • Weekends as needed Supplemental Pay: • Tips Education: • Associate (Required) Experience: • HVAC/Refrigeration: 3 years (Required) License/Certification: • EPA Type II Drivers License Nate (Required), • Driver's License (Required) Willingness to travel: • 100% (Required) Work Location: Multiple locations Company DescriptionAt Polar Air, we specialize in everything HVAC—from residential and commercial air-conditioning to walk-in coolers, freezers, and restaurant hot-side equipmentAt Polar Air, we specialize in everything HVAC—from residential and commercial air-conditioning to walk-in coolers, freezers, and restaurant hot-side equipment

Job DescriptionService Manager - North Corpus Christi Honda If you are driven to help people, passionate about customer service, and ready to lead a successful service team, then this opportunity is for you. We’re searching for an automotive service manager who is motivated to excel and serious about a true career in this highly competitive industry. As service manager, our customers, and your team, will look to you for guidance, leadership and expertise. Responsibilities • Conduct daily one-on-one client status meetings with each ASM to identify potential service issues, • Monitor automotive repair/maintenance to prevent operational delays, • Work with service director to set departmental objectives, • Recruit, interview and train service staff, • Maintain daily sales and production records as prescribed by upper management, • Review and evaluate service sales performance, • Staff technical teams relative to production requirements, • Remain current on new products and changes to existing products, • Maintain department finances within parameters established by upper management, • Assure proper repair-order flow/maximize productivity, • Monitor/control all warranty activity to ensure compliance with policies and procedures, • Adhere to dealership policy on client vehicle care and operation, • Administer payroll for service staff in cooperation with payroll department, securing approval from service director and general manager, • Enforce OSHA requirements, procedures and regulations, • Conduct performance evaluations, • Participate in operational planning, • Maintain the facility and equipment, • Conduct weekly department meetings/attend weekly manager meetings Education and/or Experience Associate's degree or equivalent from two-year college or technical school; or 2 to 4 years of related experience and/or training; or equivalent combination of education and experience. Benefits In addition to career-long personal development, our associates enjoy a number of benefits, including: • Health Insurance, • Dental Insurance, • Life Insurance, • Paid Vacation, • Paid Sick Leave, • Paid Holidays About Our Dealership We appreciate our customers and aim to make them customers for life! We value community, support local businesses, vendors, suppliers and charitable organizations. We want to give back to our community and cultivate long term relationships with our neighbors. Our employees are keys to our success. Our dealerships provide a supportive place where you belong as a member of a team that works together to reach its goals. Many of our dealerships are multi-time winners of the prestigious President’s Award, given only to the very best dealers in the nation. We are a non-discriminatory employer.

Job Description Capable of flagging up to 100 hours per week, or more? We do not over staff technicians providing the opportunity to consistently flag the hours you deserve! If you are a qualified technician not getting the hours you are capable of then come see us because we believe in taking care of our employees. Al Willeford Collision Center is seeking a qualified candidate for the exploding Portland community demand for quality collision repairs . Qualified technicians earn over $100k per year. Al Willeford Chevrolet Collision center is a family atmosphere that promotes longevity with an emphasis on work life balance with tenured employees employed over 25 years . Enjoy the benefits of a great atmosphere at a Chevrolet franchised and supported collision facility in business for over 43 years! Responsibilities The selected candidate will restore collision damaged vehicles to pre-collision condition while meeting individual job timelines. Communicating daily with body shop estimators and and body shop manager on updates and progress of each job and pass management quality inspections on every repair. Qualifications I-Car certifications,awards and experience are all considered in pay plans. The successful candidate should have previous experience with body repairs and understand estimates. Al Willeford Chevrolet Collision Center welcomes the opportunity to invest in and to develop the right candidate. Benefits • Competitive compensation package., • Opportunities for professional growth and skill development., • Supportive team environment in a respected company., • Access to latest tools and technology., • Employee discounts on vehicle purchase and service., • Medical,dental,vision,life insurance,company paid life insurance policy,cancer policy, disability,critical illness and accident policy options available., • 401K Employer safe harbor matching, • Paid vacations, • Paid sick days, • Closed Memorial Day, 4th of July, Labor Day, Christmas, Thanksgiving and New Years DayAbout the Company Al Willeford Chevrolet, located in Portland, TX, is committed to providing exceptional automotive services and customer experiences. With a strong reputation for integrity and reliability, we take pride in our team members who help maintain the high standards our customers expect. Join us and become part of a company that values quality, teamwork, and continuous improvement. Al Willeford Chevrolet is a Gold I-Car certified franchised collision center and a full certified Aluminum repair facility.

Job DescriptionDescription: Status: Non-exempt Company: Pangaea Texas, LLC Reports To: Terminal Manager Location: N/A-Traveling Pangaea Logistics Solutions is a global maritime logistics company with a strong legacy of delivering reliable, high-quality service as both vessel operators and logistics partners. We leverage our extensive fleet, world-class team, integrated supply chain capabilities, and data-driven strategies to support a wide range of cargo needs across the globe. Pangaea’s commitment to customized logistics solutions and deep industry expertise has fueled our continued expansion. With operations spanning strategic ports and terminals along the U.S. East and Gulf Coasts and across international markets, we are positioned to deliver value through innovative, efficient, and principled service—driven by insight, experience, and operational excellence. Position Summary: In this position, the team member will operate all terminal equipment to safely and efficiently load/unload cargo from ships and distribute the cargo to the appropriate building as per the operating plan and instructions; Operate as a member of a team, responsible for coordinating information flow between each crew member and location staff/management in the loading/unloading of cargo. Essential Responsibilities and Duties: [OPERATIONS FUNCTIONS] • Operates ship gears, gantry & bridge cranes and all associated equipment to load/discharge several types of customer cargos safely and efficiently from ships and barges as per the operating plan and instructions., • Operates equipment such as diesel or liquid propane forklifts, heavy pay loaders, and other support equipment associated with terminal support., • Inspect and operate safely all assigned mobile equipment as required to complete unloading terminal work assignments, including excavator and FEL in the ship holds., • Responsible for hoisting equipment and materials to repair and maintain terminal needs such as to move operating digging equipment to dig and move material such as scale, mud, rock and dirt or sand. [MAINTENANCE] • Reports any unusual condition of equipment to Maintenance Manager; Responsible for checking equipment for damage or repairs needed and reporting information to team leader., • Make regular inspections of the transport systems and perform minor maintenance tasks such as adjusting and lubricating equipment, cleaning, washing, descaling, testing, replacing filters, gauges, valves, hoses, and other minor maintenance as necessary to maximize port systems availability and reliability., • Performs minor maintenance tasks such as repairing, adjusting and lubricating equipment, gauges, valves, hoses, and etc. as necessary to maximize machine availability/reliability and assist maintenance personnel as required., • Monitor all pressures, temperature and data points on the HMI to ensure that they are at nominal operating level. [ADMINISTRATION] • Maintains and reports accurate records including beginning of shift work place inspections, shift logs and shift performance report at the end of each shift., • Complies with governmental, state, and company certification standards., • Performs rigging calculations and programming on equipment when necessary., • Performs all duties assigned by the superintendent to make sure port operations continue without interruption. [SAFETY] • Ensure that safe crane operating conditions are met before and during operation., • Works closely, as needed, with flaggers when making lifts or rigging equipment or material. For more information, please visit www.pangaeals.com Requirements: Education, Knowledge, Experience, Skills and Abilities Required: • HS diploma/GED and previous ships crane experience is preferred, • Friction and hydraulic crane experience is preferred, • Excavator or other heavy machinery experience required, • Ability to respond to issues quickly, safely and effectively in a fast-paced, stressful operating environment, • Strong communication skills, both verbal and writing, • Valid TWIC required, • Ability to work outside in all types of weather, • Ability to travel to multiple job sites as required, • Must be available to work varied hours, shifts including days/nights/weekends/holidays as required Physical Requires: • Must meet physical, mental and dexterity requirements of the job including being physically able to climb and descend ladders and stairs up to 120 feet to access all levels of port and vessel operating equipment., • Must be physically able to pull ropes for tying up ship/barges and utilize hand shovels and other tools for clean up, • Ability to work in most weather conditions and around heavy machinery, which can be dangerous at times, • Ability to work rotating shifts as determined by management, • Flexibility to adjust to changing shift work which may require early mornings, evenings and weekends, • Must meet "fit for duty" requirements upon job offer (pre-employment physical and drug test)

Job Description Overview We are seeking an Electronics Technician to join our team supporting DLA Integrated Electronic Security Systems (IESS) and Electronic Key Control (EKC). TekSynap is a fast-growing high-tech company that understands both the pace of technology today and the need to have a comprehensive well planned information management environment. “Technology moving at the speed of thought” embodies these principles – the need to nimbly utilize the best that information technology offers to meet the business needs of our Federal Government customers. We offer our full-time employees a competitive benefits package to include health, dental, vision, 401K, life insurance, short-term and long-term disability plans, vacation time and holidays. Visit us at www.TekSynap.com. Apply now to explore jobs with us! The safety and health of our employees is of the utmost importance. Employees are required to comply with any vaccination requirements mandated by contract, applicable law or regulation. By applying to a role at TekSynap you are providing consent to receive text messages regarding your interview and employment status. If at any time you would like to opt out of text messaging, respond "STOP". As part of the application process, you agree that TekSynap Corporation may retain and use your name, e-mail, and contact information for purposes related to employment consideration. Responsibilities RESPONSIBILITIES • 2+ years of practical experience required, focused in Electronics Repair, Maintenance, Installation and Checkout., • Other experience required in supervision, and shop practices, electronics repair and installation, and Information Technology installation projects., • Ability to be qualified and trained to work on the Lenel “On Guard” ESS system, CCTV’s and Morse Watchman Keypro systems., • Contractor personnel performing work on the Lenel “On Guard” ESS shall be certified by Lenel as a Lenel Certified Professional (LCP) in Access Control and Video, • Trained by staff in how to use software and hardware. (Lenel, AMAG, Honeywell, IQ MultiAccess, Bosch, LG, DAQ Electronics, DEA System SPA, Hirsch Electronics, Valerus, Pelco, IDIS, Panasonic, Axis Communication, GFMS, KeyTrak Guardian, Morse Watchman, Stanley Security Solutions Keystone, and Matrix Key Control) REQUIRED QUALIFICATIONS • Clearance:, • Must possess a Secret security clearance, • Certifications:, • Lenel Certified Professional (LCP) - Ability to Obtain after Start, • Milestone Certification - Obtained by Start, • Experience:, • Two years of overall professional experience in the Information Technology field., • Two years of overall experience in Microsoft Windows client and server operating systems., • Two years of experience with electronic security systems, specifically hands-on experience in installing, configuring, maintaining, and resolving issues with the DLA ESS or EKC system., • Education:, • High School Diploma or GED PREFERRED QUALIFICATIONS • Certifications:, • DoD Approved 8570 Baseline Certification: Category IAT Level II Qualifications WORK ENVIRONMENT AND PHYSICAL DEMANDS The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Location: Corpus Christi, TX, • Type of environment: On Site, • Noise level: Medium, • Work schedule: Schedule is day shift Monday – Friday. May be requested to work evenings and weekends to meet program and contract needs., • Amount of Travel: Less than 10% PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to handle, feel, touch; reach with hands and arms; talk and hear. The employee is regularly required to stand; walk; sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee is regularly required to lift up to 10 pounds. The employee is frequently required to lift up to 25 pounds; and up to 50 pounds. The vision requirements include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. WORK AUTHORIZATION/SECURITY CLEARANCE • U.S. Citizen, • Secret security clearance or have a current National Agency Check with Local Agency Check and Credit Check (NACLC). WAGE INFORMATION Target salary range: $50,000 - $90,000. The salary range displayed is an estimate only and is not a guarantee of compensation or salary, and will be determined on several factors regarding the individual’s particular combination of education, knowledge, skills, competencies and experience, as well as contract parameters and organizational requirements. The displayed salary is one component of the total compensation package for employees. OTHER INFORMATION Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. TekSynap is a drug-free workplace. We reserve the right to conduct drug testing in accordance with federal, state, and local laws. All employees and candidates may be subject to drug screening if deemed necessary to ensure a safe and compliant working environment. Many positions require specific certifications and/or the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. Applicants who accept an offer of employment may be subject to investigations performed by TekSynap and/or the Government to verify the candidate meets the required qualifications and other eligibility requirements. EQUAL EMPLOYMENT OPPORTUNITY In order to provide equal employment and advancement opportunities to all individuals, employment decisions will be based on merit, qualifications, and abilities. TekSynap does not discriminate against any person because of race, color, creed, religion, sex, sexual orientation, gender identity, protected veteran status, national origin, disability, age, genetic information, or any other characteristic protected by law (referred to as “protected status”). This nondiscrimination policy extends to all terms, conditions, and privileges of employment as well as the use of all company facilities, participation in all company-sponsored activities, and all employment actions such as promotions, compensation, benefits, and termination of employment. TekSynap is committed to ensuring that our online application process provides an equal employment opportunity to all job seekers, including individuals with disabilities. If you believe you need a reasonable accommodation in order to search for a job opening or to submit an application, please contact hr@teksynap.com for assistance.

Job Description Excavator Operator works on construction project sites where they are responsible for the safe and efficient operation of large excavators. The Excavator Operator is proficient in the use of excavating ditches, mass excavations, laying pipe and precast concrete structures, loading and unloading trucks. May also be equipped in a diverse range of construction equipment, including, Loaders, Dozers and other pieces of equipment. Generally, the duties performed by Excavator Operator are shown in the job description example below: • Capable of operating an excavator in compliance with the company's operating safety policies and procedures., • Operate all heavy equipment in a safe and appropriate manner., • Repair and maintain construction equipment and tools., • Perform daily safety checks of excavator equipment and report any damage or repair issues., • Report needs for larger repairs to the appropriate parties., • May be required to read and interpret construction plans., • Should be familiar with construction materials and soil types as related to OSHA standard, • Maneuver heavy equipment into loading or unloading positions, following signals from loading crew as needed; check that the vehicle position is correct and any special loading equipment is properly positioned., • Operate equipment on public roadways, maintaining proper awareness of ones surroundings., • Follow all safety precautions at all times. This includes wearing protective gear and maintaining active communication with all other construction crew members., • Work in a safe, responsible manner to not intentionally or unintentionally injure oneself, or endanger the well being of others., • Promote, execute and adhere to the company's safety program., • Safely pack and store work materials as directed by the site supervisor., • Other construction related duties as required. Requirements and Skills Below are the major skills, abilities, and knowledge that we expect candidates for the construction laborer job to possess to be considered for an interview appointment: • Knowledge: must have good knowledge and understanding of construction plans and designs, of heavy equipment operation, and how to handle tasks in a construction site., • Work Experience: Minimum 8 years of experience., • Education: may not be formally educated but must have the ability to understand written and verbal instructions., • He/she must be willing and ready to learn new ways of handling construction tasks., • Communication: must be able to understand written and verbal instructions and must be willing to adhere to plans and directives., • Health & Safety: applicants will be required to obtain health and safety certifications to be hired.

Job Description Maintenance Director (Facilities) About Avir at Corpus Christi At Avir at Corpus Christi, our mission is Exceptional Care, Compassionate Hearts. We are committed to providing high-quality patient care and a positive work environment for our staff. Our Maintenance Director (Facilities) plays a vital role in ensuring the upkeep and maintenance of our healthcare facility, allowing us to focus on what matters most – delivering exceptional patient care. Job Summary We are seeking an experienced and skilled Maintenance Director (Facilities) to join our team at Avir at Corpus Christi. The successful candidate will be responsible for overseeing the maintenance, repair, and upkeep of our healthcare facility, including all mechanical systems, plumbing, electrical systems, and building infrastructure. This is a full-time position that requires a high level of expertise and attention to detail. Responsibilities Oversee the planning, coordination, and execution of maintenance and repair projects to ensure the facility remains safe and functional Develop and implement maintenance schedules, budgets, and procedures to ensure efficient use of resources Coordinate and collaborate with various departments, including housekeeping, dietary, and patient care, to ensure a smooth operation Supervise and train maintenance staff, including electricians, plumbers, and carpenters Ensure compliance with all regulatory requirements, including OSHA and HIPAA Identify and report potential safety hazards and take corrective action to mitigate risks Develop and maintain accurate records and reports to track maintenance activities and budget Requirements Bachelor's degree in a related field, such as construction management, engineering, or a related field Minimum of 5 years of experience in a maintenance or facilities management role, preferably in a healthcare setting Strong knowledge of mechanical systems, plumbing, electrical systems, and building infrastructure Excellent problem-solving and communication skills Ability to work independently and as part of a team Familiarity with regulatory requirements and industry standards What We Offer [Insert benefits information if available] If you are a motivated and experienced maintenance professional who is passionate about delivering exceptional patient care, we encourage you to apply for this exciting opportunity. Join our team and help us drive excellence in patient care and facility maintenance! Apply Now

Job Description Job Description: Detail-oriented, reliable, and technically strong Mechanical Engineer with extensive experience in API storage tanks to lead field and engineering evaluations of in-service tanks and associated fixed equipment. This role focuses on tank inspection reviews, fitness-for-service evaluations, repair and replacement scoping, and capital planning support for process industry facilities. The engineer will analyze inspection data, perform calculations, and develop repair or replacement strategies to maintain safety, reliability, and regulatory compliance. Job Duties/Responsibilities: • Lead field evaluations of in-service API 650/653/620 storage tanks, including review of mechanical inspection data, settlement data, and corrosion assessments., • Technically review in-house and third-party tank inspection reports and define clear, written scopes of work for tank repair, alteration, or reconstruction., • Perform and review remaining life calculations based on inspection reports, • Evaluate settlement and determine required mitigations., • Review and technically assess shell UT data to establish appropriate maintenance strategies., • Review and comment on tank fabrication drawings, repair drawings, and mechanical design calculations from contractors., • Assess the integrity and remaining life based on corroded thicknesses., • Support capital projects in defining scopes for repairs and full tank replacements, including early-phase capital planning and RFQ documents., • Interface directly with fixed equipment engineers, inspectors, maintenance teams, contractors, and industry subject-matter experts., • Provide technical support during field execution, including outage and turnaround activities., • Review and support API 2000 venting calculations for normal and emergency venting., • Support tank fire protection evaluations., • Working knowledge of welding procedures., • Prepare and deliver weekly written reports summarizing tank evaluations, progress, and engineering recommendations., • Participate in constructability reviews, proposal development, cost estimating support, and contractor coordination. Minimum Qualifications: • Education: Bachelor of Science in Mechanical Engineering • Experience: Min Yr = 10+ years of experience with API storage tanks in refineries, terminals, or petrochemical environments • Licensure: P.E. Preferred* • Technical Skills: Knowledge of API 650/620/653 required • Other Skills: Strong organizational, written, and verbal communication skills Individual field assignments typically have their own unique requirements. Prior to deployment on any field assignment, you must be able to meet all client-specific site requirements. Should you be unable or unwilling to meet assignment-specific requirements, your continued employment would then be subject to the availability of other assignments whose requirements can be met. These unique requirements may include: • You must possess physical mobility (on the ground and at heights)., • You may be required to pick up, lift, carry, and move up to 50 lbs., • You may be required to work at heights, climb ladders and stairways, and may occasionally work off platforms/scaffolding/ladders using the appropriate and required fall protection., • You must be able to work in all weather conditions (including heat, rain, cold, and wind) while wearing the appropriate PPE. This may include, but not be limited to, a hard hat, safety glasses/goggles, earplugs, masks/respirators, hi-vis safety vests, leather gloves, and leather, steel-toed work boots., • You may be required to position yourself to work in confined spaces, • You may be required to adhere to a client’s random drug testing program prior to entering their site., • You may be required to meet a client’s facial hair safety policy prior to entering their site. BE provides a comprehensive benefits package for eligible employees, including health, dental, and vision insurance, life and disability insurance, 401(k) savings plan with employer matching, company-paid holidays, paid parental leave, compensatory time off, and paid time off (PTO). Additional details of participation in these benefit plans will be provided if an employee receives an offer of employment. Per Diem is available for the right candidate. Brindley Engineering is an Equal Opportunity Employer and is committed to hiring and retaining a diverse workforce. Employment decisions are made without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected characteristic as outlined by federal, state, or local laws. BE participates in E-Verify. For additional information about E-Verify, please visit www.e-verify.gov.

Job Description Bristol is hiring a Construction Surveillance Engineer to support the Navy at NAS Corpus Christi and Kingsville. Essential Job Duties and Responsibilities: The CSE shall provide management support to the FEAD/ROICC for construction services such as construction inspection, quality assurance, monitoring ESS compliance and contract administration. The construction work includes repair, demolition, and new construction that the office executes for various commands and tenants on the installation. Work will encompass all trades that are typical for repair, demolition, and new construction projects. Specific workload will be identified upon arrival. • Coordinate request from the construction Contractor for outage requests, excavation permits, burn permits, haul routes and other similar items., • Attend Meetings and Conferences. The CSE shall take notes, provide information to the FEAD/ROICC or the FEAD/ROICC’s representative at meetings, conferences, and briefings. Includes: Preconstruction Conference, Safety Meetings, Contractor Quality Control (CQC) Meetings, Partnering Meetings., • Provide Construction Briefings and Reports., • Provide review of submittals designated for Government approval., • Provide construction schedule review/analysis and notes/comments/recommendations on: Progress Schedules and Network Diagrams, Contractor’s Safety Plan, and CQC Plan., • Monitor construction work for project CQC compliance with the contract and Contractor submitted plans., • Prepare Construction Representative’s Reports (CRRs) and Contract Construction Compliance Notices (CCCNs)., • Report instances of non-compliance with safety requirements., • Monitor compliance with environmental protection requirements; monitor measurements and assurance surveying; monitor materials testing, • Witness testing of waste, gas, water, electrical, heating, ventilation, air conditioning, fire protection, elevator, boiler, and energy monitoring control systems., • Review Daily Contractor Quality Control (CQC) and Contractor Production Reports (CPRs); monitor the updating of Submittal Status Logs; and other required documentation., • Work with the CSET and FEAD/ROICC personnel to complete, together with the construction Contractor’s representative, the field pay estimate worksheet for the construction contract., • Notify FEAD/ROICC Leadership of disagreements, discrepancies, or major problems., • Assist conducting pre-final inspections., • Provide advice for modification negotiations., • Maintain Working Files. NAVFAC’s Electronic Construction and Facility Support Contract Management System (eCMS) shall be used to manage electronic submittals and documents., • Prepare an independent construction cost estimate for modifications to construction contracts; prepare, for each modification cost estimate, a narrative assessment of the impact of the proposed change on the construction Contractor’s operations., • Provide Construction Photographic and Record Drawing Services., • Perform Constructability Review Services; perform spot checks for completeness and accuracy of the construction plans and specifications and to determine the constructability of the facility at the beginning and duration of each Phase of Construction., • Requests for Information (RFI) management.Job Qualifications and Skills:Experience:, • A minimum of seven (7) years of experience as a Construction Manager, Field Engineer, Project Engineer or Quality Control Manager on commercial/industrial type facilities, utility or waterfront related contracts valued in excess of $5 million., • Construction technical competencies and qualifications to verify that a specific level of workmanship was obtained., • Knowledge of construction scheduling methods and familiarity with the use of scheduling software, including but not limited to Primavera Suretrak/P3/P6 and Microsoft Project., • Proficiency in using computer software programs such as Microsoft Word, Excel, PowerPoint, and Outlook; Adobe Acrobat Professional; and RS Means/CostWorks., • Average agility and dexterity. CSET will be required to perform duties that involve moderate walking over rough, uneven, or slippery surfaces, recurring bending, crouching, stooping, stretching, climbing ladders, walking up and down several flights of stairs or similar activities, recurring lifting of moderately heavy objects less than 50 lbs. such as testing or measuring equipment, and regular visits to construction sites., • Ability to communicate effectively, concisely, and authoritatively in English both orally and in writing. Experience in preparing correspondence, written reports, and in briefing management personnel., • Experience in developing and maintaining complex, long term, multi-year program construction management activities including submittal and Request for Information (RFI) processing., • Experience and familiarity with Federal building design criteria and construction guide specifications., • Knowledge of construction practices and techniques, e.g., proper applications of construction materials and methods of installation., • Ability to accurately calculate construction costs for changes, price the value of needed work, and provide recommendations for equitable adjustments., • Ability to monitor the preparation of as-built activities of contractors to ensure that those documents are being prepared on an on-going basis. Ability to review contractor submissions of as-built drawings for completeness and accuracy and advise in writing the appropriate Government personnel as to the acceptability of such submissions., • Ability to identify critical and long lead-time materials and recommend procurement strategies to prevent negative impact on quality, cost, and schedule., • Completed 30 Hour OSHA Construction Training within the past 2 years., • Must hold a certificate in USACE Construction Quality Management (CQM) for Contractors Training (maintain valid 5-year certificate) or obtain certification within 60 days of onboarding, • S. Citizen, • A valid driver’s licenseEducation: Bachelor’s Degree in one of the following areas: a degree in engineering from an ABET accredited university; a degree in construction management from an ABET or ACCE accredited university; or a degree in architecture from a NAAB accredited university. The CSE may substitute the degree requirement with an additional five (5) years of experience beyond the experience requirement of a minimum of seven (7) years of experience as a Construction Manager, Field Engineer, Project Engineer or Quality Control Manager on commercial/industrial type facilities, utility or waterfront related contracts valued in excess of $5 million. Benefits Excellent salary and benefits package to include paid time off, paid holidays, comprehensive health plan including medical, dental, vision, life, short-term disability insurance, and 401(k) plan with employer match. Equal Opportunity Employer Statement Bristol companies are equal opportunity employers and offer any available positions to all, without regard to race, color, religion, sex, national origin, age, disability, veteran status, parenthood, pregnancy, marital status, or changes in marital status, in accordance with applicable state and federal laws. This applies to recruitment, placement, pay, benefits, training, employment status changes, social and recreational programs, and other conditions and benefits of employment. Bristol grants employment preference first to BBNC and Choggiung shareholders, their spouses, or descendants, and second to Alaska Native Corporation shareholders in accordance with P.L. 93-638. Disclaimer This job description is not intended to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice. This job description is not a contract or employment. It does not promise or guarantee any particular benefit or specific action. All employment with Bristol is “at-will” which means that Bristol or employee can terminate the employment relationship at any time with or without cause.

Job DescriptionDescription: Description Turbomachinery Industries is seeking an experienced Machine Shop Supervisor / Foreman to lead our machine shop operations. This position is responsible for overseeing the day-to-day activities of the machine shop, ensuring the safe, efficient, and timely machining and repair of components used in compressors, turbines, pumps, and other rotating equipment. The ideal candidate is a hands-on leader with extensive machining experience who can effectively supervise personnel, coordinate shop workflow, maintain quality standards, and drive continuous improvement. This role works closely with Operations, Project Management, Engineering, and Quality to ensure customer commitments are met while maximizing productivity and profitability. Responsibilities Include • Supervise, mentor, and develop machine shop personnel, fostering a culture of safety, accountability, quality, and teamwork., • Plan, prioritize, and schedule machine shop work to meet customer delivery commitments and maximize equipment utilization., • Coordinate machining activities for new manufacturing and repair of rotating equipment components, including shafts, impellers, sleeves, seal housings, bearing housings, and casings., • Review engineering drawings, repair procedures, and customer specifications to ensure work is completed accurately and efficiently., • Monitor workflow, labor utilization, and machine capacity to optimize productivity and minimize downtime., • Ensure all machining operations meet quality standards, dimensional tolerances, and customer specifications., • Collaborate with Project Managers, Engineering, Inspection, and Operations to resolve technical issues and production challenges., • Maintain machine tools, equipment, and shop organization to promote a safe and efficient work environment., • Enforce all company safety policies, quality procedures, and operational standards., • Assist with estimating machining hours, evaluating repair methods, and recommending process improvements., • Support continuous improvement initiatives focused on productivity, quality, cost reduction, and on-time delivery., • Participate in hiring, performance evaluations, employee development, and disciplinary actions as needed.Requirements: Requirements • Minimum 7+ years of machining experience in rotating equipment, turbomachinery, or industrial repair environments., • Previous leadership experience as a Machine Shop Lead, Foreman, Supervisor, or equivalent preferred., • Strong knowledge of manual machining operations; CNC machining knowledge is a plus., • Experience machining and repairing rotating equipment components, including pumps, compressors, steam turbines, and gearboxes., • Ability to read and interpret engineering drawings, repair procedures, and technical specifications., • Strong understanding of machining tolerances, fits, geometric dimensioning and tolerancing (GD&T), and precision measuring equipment., • Proven ability to plan work, manage priorities, and lead multiple projects simultaneously., • Excellent communication, organizational, and problem-solving skills., • Commitment to maintaining the highest standards of safety, quality, and customer satisfaction., • High school diploma or equivalent required; technical school or machinist apprenticeship preferred. Preferred Qualifications • Experience with both manual and CNC machining operations., • Experience supervising machine shop scheduling, labor planning, and productivity metrics., • Familiarity with API standards and rotating equipment repair practices., • Lean Manufacturing or Continuous Improvement experience is a plus. At Turbomachinery Industries, you'll join a team committed to delivering industry-leading rotating equipment repair and machining solutions while providing opportunities for professional growth and leadership development.

Job Description Do you want to work at one of the busiest repair shops in the region where your employer treats you like a member of the family? We are hiring experienced All Level Automotive Technicians to work in our busy service department! There has never been a better time to advance your career in the automotive industry. This is a RARE opportunity to make a difference by joining a thriving, award-winning auto dealer team! Apply today. Business is booming and we need to fill this position now. We will support you daily and help you take your career to the next level. Let us make you an offer! This is a true career opportunity. Come grow with us. All level techs are encouraged to apply. We want to meet you! Busy shops, tons of work, flexible work schedules, paid training classes and certifications. Applicants must have a valid driver’s license and a clean driving record. We are part of Lithia Auto Group, America's leading auto dealer. Our employee benefits include: Let us make you an offer! Up to $50 per flag hour $4K to $10K per month Medical, Dental and Vision Plans Paid Holidays & PTO Short and Long-Term Disability Paid Life Insurance 401(k) Retirement Plan Employee Stock Purchase Plan Lithia Learning Center Vehicle Purchase Discounts Wellness Programs Lithia Chrysler Dodge Jeep Ram of Corpus Christi 4313 S Staples St Corpus Christi, TX 78411 \nCompany Description We are part of Lithia Auto Group, America's leading auto dealer. We are part of Lithia Auto Group, America's leading auto dealer.

Job Description Allied Valve is seeking an experienced Lead Leak Repair Technician to join our growing field service team. This position is designed for an experienced leak repair professional with 5+ years of hands-on experience performing and leading industrial leak repair work. We are recruiting nationwide and will provide a set relocation assistance amount based on the candidate's current location for individuals willing to relocate to Joliet, Illinois; Appleton, Wisconsin; or Riverdale, Iowa. The Lead Leak Repair Technician will perform and lead complex industrial leak repair projects at customer facilities. This includes installing mechanical enclosures and engineered repair devices, composite wrapping, valve repacking, and other online leak repair techniques. Experience with field machining and precision line freezing is highly preferred. This is a hands-on field leadership position requiring strong mechanical skills, sound judgment, a commitment to safety, and the ability to lead technicians while completing critical repairs in demanding industrial environments. Responsibilities: • Lead and perform industrial online leak repair projects at customer facilities., • Evaluate leaking piping, valves, flanges, fittings, and other pressure-containing equipment and determine appropriate repair methods., • Install mechanical enclosures, engineered clamps, and other leak containment devices., • Perform composite and carbon fiber wrap repairs on piping and industrial equipment., • Perform valve repacking and leak sealing on valves, flanges, piping systems, and related equipment., • Safely perform repairs on operating systems while following established procedures and customer safety requirements., • Read and interpret drawings, measurements, specifications, and repair procedures., • Take accurate field measurements and communicate information required for engineered repair solutions., • Lead, train, and provide direction to Field Technicians during repair projects., • Ensure tools, equipment, materials, and safety equipment are properly prepared for each job., • Complete job documentation and communicate repair status with customers and internal teams., • Maintain a strong focus on safety, quality, and customer service at all times., • Travel to customer facilities as required, including regular overnight and emergency assignments. Required Qualifications: • 5+ years of significant industrial leak repair experience, preferably in a Lead Leak Repair Technician or similar senior field position., • Strong hands-on knowledge of online leak sealing and industrial leak repair methods., • Demonstrated experience installing mechanical enclosures, clamps, and engineered leak repair devices., • Experience performing composite wrap repairs., • Experience with valve repacking and sealing applications., • Strong mechanical aptitude and ability to safely operate industrial hand and power tools., • Ability to accurately measure piping, valves, flanges, and other industrial components., • Experience leading technicians and directing field repair activities., • Strong understanding of industrial safety practices and procedures., • Ability to work at heights, in confined spaces, and in industrial environments while wearing required PPE., • Ability to lift at least 50 lbs., • Valid driver's license and acceptable driving record., • Willingness to travel and work overtime as required. Preferred Experience: • Field machining experience., • Precision line/pipe freezing experience, including controlled liquid nitrogen freezing systems., • Experience working in refineries, chemical plants, power generation facilities, pulp and paper mills, ethanol facilities, food processing plants, utilities, or other heavy industrial environments., • Experience training or mentoring junior leak repair technicians. Schedule & Travel: The typical schedule is primarily daytime, Monday through Friday, approximately 8:00 AM–4:30 PM. However, industrial leak repair is driven by customer needs and plant conditions, so candidates must be comfortable with a variable schedule. Overtime is required and may include early mornings, evenings, weekends, emergency callouts, and extended shifts depending on customer requirements. Travel to customer facilities is required, with the majority of work supporting industrial customers throughout the Midwest and additional travel throughout the United States as needed. Relocation Assistance Allied Valve is recruiting experienced Lead Leak Repair Technicians nationwide. Candidates may be based from one of the following locations: • Joliet, Illinois, • Appleton, Wisconsin, • Riverdale, Iowa Qualified candidates relocating for the position will receive a set relocation assistance amount based on their current location and required move.

Job Description Company Description For over 80 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support and knowledgeable staff to implement the needed process solutions with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: • Process Control & Safety Systems, • Control Valves & Regulators, • Isolation Valves & Actuation, • Oil & Gas Automation, • Reliability Solutions & Services, • Pressure Management, • Specialty Pumps & Rotating Equipment, • Instrumentation, • Maintenance & Repair Services Do you have the skill sets listed below, or a combination thereof? How about the experience, training, or education to take on the following responsibilities? • DCS configuration and PLC programming, such as:, • Safety Instrumented Systems (SIS), • Alarm Management, • Burner Management, • HMI graphics (iFIX), • Simple or complex loops, • Batch, • Ladder logic, • SCADA, • Participate in designing, configuring, testing, debugging and documenting user applications in various software products, • Apply generally accepted programming standards and techniques to assure efficient program logic, • Act as liaison with manufacturers and vendors of software and application products, especially relating to problem diagnosis and resolution, • Discover inspiring methods that bring great value to the customer by identifying and providing innovative solutions, • Expertise in implementing automation strategies, optimizing process control, and investigate process control related issues by coordinating with plant process and control engineers, • Experience with Cloud Based Virtual environments and knowledge of basic network architectures., • Plan and execute software version upgrade releases and custom interfaces Can you answer yes to the following questions? (Perks of Joining our Team) • Does working on a collaborative project team at our corporate office sound like your dream job, or are you more invigorated working on customer sites? (we offer both options or combination thereof), • Do you thrive on meeting customer deadlines and balancing multiple projects or demands throughout the day?, • Would you like opportunities to develop your technical skills and knowledge – and be financially incentivized to do so?, • Do you enjoy a dynamic and changing environment focused on meeting customer needs?, • Are you adaptable and tempered in crisis management situations in which customers depend on you to ensure they operate reliably, safely and cost effectively?, • Do you prefer working with likeminded individuals who are equally motivated to develop cutting-edge, innovative solutions?, • Do you enjoy a multi-cultural environment with the free flow exchange of creative ideas?, • Do you prefer a small to mid-size company where you can work, eat and engage with company leaders and execs? Basic Qualifications • Bachelor’s degree in engineering, computer science, or relevant software/computer related fields, or two to four years related experience and/or training., • Related experience includes spreadsheet manipulation or database manipulation and macro development. Additional experience preferred with any DCS systems such as Operator Display implementation, I/O database implementation and Control Strategy implementation., • Able to work both independently and collaboratively alongside Puffer-Sweiven’s customers, management, and sales organization, • Ability to apply mathematical concepts such as fractions, percentages, ratios and algorithms to practical and complex situations, • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form that apply to several abstract and concrete variables, • Ability to effectively use the following computer applications: Word processing, spreadsheets, Internet software, E-mail, Database software, Networking, PC and mainframe systems. Areas of Interest • DCS: DeltaV, DeltaV SIS, Honeywell, Yokagowa, PlantPaX, Foxboro, 800Xa, ABB, Rockwell, HC900, • PLC: Modicon, Triconex, Siemens, SLC5, PLC5, • Legacy Systems: Fisher Provox, Fisher Rs3

Job Description Position Overview This is a high-performance business development role with a primary goal to aggressively grow machining and repair services. The position is responsible for building a predictable revenue pipeline, closing new business, and establishing our client as a preferred partner. Key Responsibilities • Monitor & maintain existing client relationships, • Develop and execute strategic account plans for key clients, • Prospect and close new business with oil & gas and manufacturing companies, • Conduct client meetings, site visits, and technical presentations to key representatives/managers, • Build, manage, and advance a disciplined pipeline from prospecting through close, • Execute daily outreach across calls, email, LinkedIn, and field visits, • Conduct technical sales meetings, site visits, and solution presentations, • Drive urgency, overcome objections, and close business consistently, • Maintain accurate CRM data, forecasting, and weekly pipeline reportingQualifications, • Demonstrated high-level of sales success (10 years’ experience), • Minimum High School Diploma or GED, • Ability to grasp technical machining industry knowledge and nomenclature#ZR We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description The Arcticom Group (“TAG”) is a U.S.-based network of commercial and industrial mechanical services companies that provide HVACR service, maintenance, and installation services throughout North America. TAG is committed to being an “employer of choice” and ensuring employees have a home where they can learn and grow. With competitive compensation and an attractive benefits package, TAG is an exciting place to work. Industrial and Commercial Mechanical (ICM) is a full-service mechanical contractor serving industrial and commercial customers across the Texas and Louisiana Gulf Coast since 2012. With multiple service locations throughout the region, ICM specializes in the maintenance, repair, troubleshooting, and optimization of HVACR, BAS, and rotating equipment systems. Our highly experienced management team and union-trained technicians support a wide range of facilities, including industrial, manufacturing, healthcare, marine, warehousing, institutional, and retail environments. Committed to safety, reliability, and customer service, ICM provides customized maintenance solutions and 24/7 emergency support to help customers maximize equipment performance and operational efficiency. ICM, a TAG Company, is seeking Chiller Technicians for commercial service work in and around the Corpus Christi, TX area. Role Summary A Chiller Technician is responsible for maintaining, troubleshooting, and repairing chillers and related systems. The Technician must be able to accurately diagnose, repair, and calibrate chillers and other HVAC equipment. Responsibilities include performing preventive maintenance on chillers, valves, pumps, and other related equipment; testing, calibrating, and adjusting chiller systems; and providing technical assistance to customers. The Technician must possess strong communication and customer service skills, as well as a working knowledge of electrical and mechanical systems. The ideal candidate will have experience working with chillers, as well as a basic understanding of refrigeration principles. Roles and Responsibilities • Install, maintain, and repair chillers and other refrigeration systems, • Troubleshoot and repair electrical and mechanical issues, • Inspect and test components to ensure they are working properly, • Conduct regular maintenance to minimize downtime, • Diagnosing and resolve issues with air flow, refrigerant levels, and other system components, • Replace malfunctioning components, • Calibrate and adjust components to ensure optimal system performance, • Follow safety protocols and procedures, • Keep up to date with the latest industry developments Skills and Qualifications, • 2-5 + years of HVAC/R or relevant experience, • Ability to safely lift up to 50lbs, • Ability to read and understand technical manuals, • Knowledge of basic electrical and mechanical systems, • Ability to troubleshoot and repair chillers and related components, • Detail-oriented, • Strong organizational skills, • Ability to troubleshoot and repair mechanical and electrical systems, • Drug Free / Industrial Plant Experience is a Plus. Benefits • This is a union position offering a highly competitive Union pay and benefits package in accordance with applicable CBA. Current union membership is not required; membership will be facilitated by the employer for the right candidate., • Paid vacation and holidays in accordance with applicable CBA, • Year-round, steady work, • Opportunities for advancement, • Supportive, team-based work environment

Job DescriptionDescription:Offshore Fitter Location: Offshore Employment Type: Full-time Job Summary The Offshore Fitter is responsible for accurately laying out, cutting, and fitting piping, vessel, and structural components based on supplied drawings or field-verified dimensions. This position requires offshore construction experience, physical capability, and a strong commitment to quality, productivity, and safety. The Fitter must maintain professionalism, show up on time, and work effectively with helpers, riggers, and welders. Acadian Contractors, Inc. maintains a continuing policy of non-discrimination in employment. It is our policy to provide equal opportunity to protected veterans in all phases of the employment process and in compliance with applicable federal, state, and local laws and regulations. This policy of non-discrimination shall include, but not be limited to, the following employment decisions and practices: hiring; promotions; demotions or transfers; layoffs; recalls; terminations; rates of pay or other forms of compensation; selection for training, including apprenticeship; and recruitment or recruitment advertising. All employment decisions are based only on valid job requirements. Key Responsibilities • Figure material take-offs on drawings for required cut lengths., • Use pipe cutting machine, or if unavailable, use beveling machine to cut pipe to required length., • Communicate with helper/rigger to identify needed material or equipment for each task., • Align parts using jacks, turnbuckles, wedges, drift pins, pry bars, and heavy hammers., • Mark reference points on floor or face block and transpose them to workpiece using measuring devices, squares, chalk, and soapstone., • Give instructions to welders to build up low spots or short pieces with weld., • Straighten warped or bent parts using sledge, hand torch, straightening press, and push-pull methods., • Remove high spots and cut bevels using hand files, portable grinders, and cutting torch., • Examine blueprints and plan work sequence, applying knowledge of geometry, weld shrinkage, machining, and metal thickness., • Assemble and secure pipes, tubes, fittings, and related equipment using welding, brazing, cementing, soldering, and threading joints., • Label all information on pipe before cutting; transfer item numbers onto cut sheet and carry them over to drop pipe., • Inspect and test installed systems and pipelines using pressure gauges, hydrostatic testing, observation, or other methods., • Ascend/descend stairwells frequently with or without tools and equipment., • Plan pipe system layout, installation, or repair per specifications., • Read and understand blueprints and ISOs., • Demolish and install handrails and grating on platform., • Verify all measurements, checking for square and level before releasing to welder., • Note pre-weld dimensions on fitter drawings., • Hang and swing on vertical rope to/from platform and boat (potential rough seas/wind)., • Ensure all fabricated items are tagged with the correct job number, customer name, and piece number., • Climb and work from heights., • Pull tools and equipment up/down to workstations or areas., • Show up to work on time and as scheduled., • Inspect all equipment daily (torch, torch hoses, grinder, levels, tapes, etc.)., • Maintain a clean and safe work area by sweeping as needed., • Complete and discuss a thorough Job Safety and Environmental Analysis (JSEA) prior to each task., • Maintain a positive attitude toward customers and represent ACI professionally.Qualifications, • High school diploma or equivalent preferred., • Preferably 2 years minimum experience in fitting (piping, vessel, and structural) fabrication., • Minimum of 2 years recent offshore construction experience., • Most recent offshore experience within the last 4 years., • Ability to read and interpret ISOs and blueprints., • Familiarity with offshore emergency response, escape procedures, and water survival skills.HSE Responsibilities, • Embrace, lead, and demonstrate “Acadian F.I.R.S.T.” – Vision & Mission Statement as fundamental core values., • Demonstrate visible leadership and support proactive safety processes (JSA, Time Out & TEAM BBS Observations) to achieve an incident-free workplace and advance our safety culture., • Adhere to all Health, Safety & Environmental (HSE) Management System policies, procedures, safe work practices, and client-specific regulatory requirements., • Make a personal commitment and be accountable for HSE results, driving toward the achievement of defined goals. Clearly communicate these goals through direct reports, while coaching, mentoring, and empowering others to achieve desired outcomes., • Conduct periodic quality assessments of HSE processes to enhance personal coaching and mentoring effectiveness and demonstrate ownership in the successful implementation of HSE programs.Requirements:

Job DescriptionMust be willing to travel/temporarily relocate to the following locations: • Pascagoula, MS., • Lockport, LA., • Houma, LA. AAA USA is actively hiring experienced Pipe Fitters to support major shipbuilding, marine construction, repair, and maintenance programs in Multiple Locations. We are seeking skilled marine professionals with experience fabricating, installing, modifying, and repairing piping systems aboard vessels and in shipyard environments. This is an excellent opportunity to join a long-term marine program offering competitive pay, overtime opportunities, relocation assistance, and career growth within the marine industry. Why Marine Professionals Choose AAA USA: • Competitive Pay., • Overtime Opportunities., • Long-Term Marine Programs., • Relocation Assistance Available., • Referral Programs., • Medical, Dental & Vision Benefits., • 401(k) with Company Match., • Paid Time Off & Paid Holidays. Essential Functions: • Fabricate, assemble, install, modify, and repair marine piping systems in accordance with engineering drawings and customer specifications., • Read and interpret blueprints, schematics, isometric drawings, and technical work instructions., • Measure, cut, bevel, thread, bend, and fit pipe to required dimensions and tolerances., • Align, position, and secure piping systems and components for installation aboard marine vessels., • Perform inspections of piping systems to verify proper fit, alignment, and compliance with quality standards., • Repair, modify, and replace existing piping systems as required during shipbuilding and vessel repair projects., • Work safely in confined spaces, at heights, and in physically demanding shipyard environments., • Collaborate with welders, supervisors, and other trades to support production schedules and project milestones., • Maintain compliance with all company safety policies, quality standards, and shipyard procedures. Requirements: • Experience as a Pipe Fitter in shipbuilding, marine, industrial, or heavy construction environments., • Ability to read and interpret blueprints, schematics, isometric drawings, and technical documentation., • Experience measuring, cutting, threading, bending, fitting, and installing pipe., • Knowledge of pipe materials, fittings, valves, and marine piping installation techniques., • Strong understanding of shipyard safety practices and workplace safety standards., • Ability to work in confined spaces, at heights, and in varying weather conditions., • Basic math, mechanical aptitude, and problem-solving skills., • Ability to work independently and as part of a team., • Must be eligible to work in the United States.

Job Description Small and Large Diameter Pipe Layer work on construction project sites where they are responsible for the safe and efficient instillation and repair of small and large diameter pipe. Perform tasks involving labor at construction projects. Generally, the duties performed by Large Diameter Pipe Layer are shown in the job description example below: • Capable of laying pipe, connecting and sealing pipe connections in compliance with the company's operating safety policies and procedures., • Use, Repair and maintain construction hand and power tools., • Calculate and adjust grade using levels and lasers., • Set materials in place, • May be required to read and interpret construction materials., • Cut pipe to specified lengths., • Give hand signal instructions to operators., • Follow all safety precautions at all times. This includes wearing protective gear and maintaining active communication with all other construction crew members., • Work in a safe, responsible manner to not intentionally or unintentionally injure oneself, or endanger the well being of others., • Promote, execute and adhere to the company's safety program., • Safely pack and store work materials as directed by the site supervisor., • Other construction related duties as required. Requirements and Skills Below are the major skills, abilities, and knowledge that we expect candidates for the construction laborer job to possess to be considered for an interview appointment: • Knowledge: must have good knowledge and understanding of construction plans and designs, of heavy equipment operation, and how to handle tasks in a construction site., • Work Experience: Minimum 5 years of experience., • Education: may not be educated but must have the ability to understand written and verbal instructions is important. He/she must be willing and ready to learn new ways of handling construction tasks., • Communication: must be able to understand written and verbal instructions and must be willing to adhere to plans and directives., • Health & Safety: applicants will be required to obtain health and safety certifications to be hired.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Company car, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Drive Construction Excellence We are seeking an experienced Director of Construction to lead the overall performance of our construction department in Corpus Christi. This position provides leadership, direction, and accountability to the Project Managers and other construction team members responsible for executing individual projects. The Director of Construction will not directly manage an assigned portfolio of projects. Instead, this leader will ensure the Project Managers consistently deliver profitable, high-quality projects while meeting customer expectations, company standards, and departmental goals. Key Responsibilities Department Leadership • Lead the daily operations and overall performance of the construction department, • Manage, coach, and develop Project Managers and other construction team members, • Establish clear expectations and hold employees accountable for performance, • Ensure Project Managers follow company processes and consistently execute their responsibilities, • Monitor individual and departmental KPIs and address performance concerns promptly, • Conduct regular project, production, and financial review meetings with Project Managers, • Evaluate department capacity, staffing, subcontractor availability, and resource needs, • Partner with the General Manager to establish departmental goals and execute business priorities, • Build a culture centered on accountability, teamwork, customer service, and continuous improvementFinancial and Operational Performance, • Take ownership of the construction department’s revenue, gross profit, production, and operational results, • Monitor project financials and department performance through regular reporting and review, • Hold Project Managers accountable for maintaining project budgets, schedules, documentation, and profitability, • Review estimates, supplements, change orders, and project financials as needed to ensure accuracy and protect margins, • Identify underperforming or at risk projects and work with the responsible Project Manager to establish a corrective action plan, • Identify opportunities to improve workflow, efficiency, quality, and financial performance, • Ensure the department has the staffing, subcontractors, and resources needed to support production goalsProject Management Oversight, • Provide oversight and direction to Project Managers throughout the construction lifecycle, • Ensure Project Managers accurately estimate, scope, schedule, and budget each project, • Confirm that Project Managers secure signed contracts, required deposits, and customer approvals before work begins, • Ensure permits are obtained and projects comply with applicable building codes and local requirements, • Monitor project progress, anticipated completion dates, costs, and customer satisfaction, • Ensure Project Managers maintain complete and accurate project documentation, • Review escalated project concerns and guide Project Managers in developing appropriate solutions, • Conduct project reviews, site visits, and walkthroughs as needed to evaluate progress, quality, or performance, • Ensure completed work meets approved plans, specifications, scopes of work, and company quality standardsSubcontractor and Resource Oversight, • Oversee the department’s subcontractor and vendor network, • Ensure Project Managers properly identify, evaluate, and manage qualified subcontractors, • Establish expectations for subcontractor pricing, quality, timeliness, professionalism, safety, and documentation, • Monitor subcontractor performance and address recurring concerns, • Support negotiations involving pricing, terms, capacity, or performance issues, • Maintain adequate subcontractor coverage to support current and anticipated production needsCustomer Experience and Quality, • Establish and maintain customer service expectations for the construction department, • Hold Project Managers accountable for providing clear and consistent customer communication, • Support Project Managers with escalated customer concerns when leadership involvement is appropriate, • Ensure warranty claims are assigned, tracked, and resolved promptly, • Monitor project quality and implement improvements when recurring issues are identified, • Promote a customer experience that supports referrals, repeat business, and the company’s reputationQualifications, • At least five years of construction management or construction operations experience preferred, • Previous experience leading Project Managers and overseeing a construction department, division, or similar operation, • Restoration, reconstruction, insurance repair, or disaster recovery experience is strongly preferred, • Demonstrated experience managing employees, department financials, subcontractor relationships, and operational performance, • Strong understanding of estimating, scoping, supplements, change orders, contracts, permitting, scheduling, and construction project execution, • Proven ability to lead teams, improve performance, and protect project profitability, • Strong leadership, communication, negotiation, and problem-solving skills, • Ability to evaluate multiple projects and competing priorities from a departmental perspective, • Comfortable reviewing financial reports, project performance, and departmental KPIsThe salary listed is dependent upon experience. The compensation structure for this position consists of a base salary along with a bonus.

Job Description Job Requirements:Requirements:- Valid Class A CDL with at least one year of verifiable OTR experience in Flatbed operations.- Maintain a clean safety and driving record (No SAP, DUI, or DWI violations).- TWIC Card is preferred but not mandatory.- No more than three moving violations within the past three years and no at-fault accidents.- Must demonstrate strong flatbed load securement knowledge (chaining, binding, tarping, strapping) Job Description:What we offer:- Fleet of 2023-2026 Freightliner, Peterbilt, Kenworth, and Volvo models equipped with - APUs, refrigerators, microwaves, and inverters.- Flatbed load securement equipment is fully provided.- On-site maintenance and repair services- Expected weekly gross earnings: $7,000 - $10,000- 30% from total gross- Direct deposit is every Friday- Performance & Compliance BonusesWage Range: $2500 per week - $3200 per week Weekly USDGeneral Description of Benefits: CB Freight Inc. is a family-owned interstate freight transportation carrier founded in 2016. Drivers are treated with respect, dignity, timely pay, and top-tier equipment . What we offer:- Fleet of 2023-2026 Freightliner, Peterbilt, Kenworth, and Volvo models equipped with - APUs, refrigerators, microwaves, and inverters.- Flatbed load securement equipment is fully provided.- On-site maintenance and repair services - Expected weekly gross earnings: $7,000 - $10,000- 30% from total gross- Direct deposit is every Friday- Performance & Compliance Bonuses

_ Yellowstone Local is proud to represent Scott Electric, an industry leader in electrical, HVAC, plumbing, and telecom services throughout South Texas. If you are a licensed Journeyman Plumber who takes pride in quality workmanship and wants steady work with a respected company in Corpus Christi, this opportunity is built for you. Pay: $30 per hour, depending on experience Full benefits package including medical, dental, vision, short-term disability, and 401k with a 3% company match Full-time schedule, 40 hours per week Consistent, year-round work with an established South Texas company Opportunity to work on a mix of residential and commercial plumbing projects Local work serving the Corpus Christi and Coastal Bend area Over 100 years of serving the Corpus Christi community Strong local reputation built on quality service and long-term customer relationships Supportive, team-focused work environment Leadership that values skilled trades professionals and promotes safe, high-quality work A stable company with deep roots in South Texas Perform residential and commercial plumbing service, repair, and installation in Corpus Christi, TX, and the surrounding Coastal Bend region Troubleshoot plumbing systems, diagnose issues, and complete effective repairs Install and replace fixtures, piping systems, water heaters, and related plumbing components Read and interpret blueprints, schematics, and technical drawings Ensure all work complies with local plumbing codes and safety regulations Communicate clearly with customers regarding findings, repair options, and completed work Work independently or alongside team members on scheduled service calls and emergency jobs Maintain a clean and organized job site while representing Scott Electric professionally Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. Valid Plumbing Journeyman License 3 to 5 years of experience in residential and commercial plumbing Ability to pass a drug screening, including a hair follicle test Formal plumbing training or trade certification preferred Strong knowledge of plumbing systems, troubleshooting, and code compliance Ability to read blueprints and technical documents Commitment to workplace safety and quality workmanship Clear communication and customer service skills Scott Electric Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status. #yellow

We are offering a $2,000.00 sign on bonus for a second shift diesel mechanic. We have an immediate position open for a Diesel Mechanic to work on our fleet of garbage trucks at our Corpus Christi, Texas location. This position is heavy in preventative maintenance, electrical, and hydraulics along with engine diagnosis and minor engine repair. We have an excellent management team. We offer stability and consistent overtime along with opportunity for advancement. Monday-Friday, night shift typically from 12pm with some weekends. 10-12 hour shifts and occasional Saturdays for extra OT. We offer top hourly wage and because of all the OT our mechanics make great money plus we offer family benefits, 401k, and vacation. The ideal candidate will possess: 2+ years’ experience in heavy diesel truck maintenance and repair. Class A or B CDL is a plus. Be able to work in all weather conditions. #ACBoost Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status.

Transfer Driver Ready to rev up your career? Do you like the thought of spending your workday on the road? Do you have an eye for detail and a commitment to punctuality? If so, consider becoming U-Haul Company's newest Transfer Driver! In this role you will help support the U-Haul community by transporting equipment to and from the repair shop, ensuring that customers can continue to receive the highest quality of care. Whether you are looking for your first job in the industry or have vehicle-repair experience already, U-Haul is the place for you! We have the largest fleet of trucks and trailers in the industry, and we need a first-class team to keep them maintained for our customers. We add to our fleet each year, which ensures that you will always be transporting and working on the latest new equipment. As a U-Haul Transfer Driver, you will use U-Haul Company's proprietary technology to assess and care for field vehicles. U-Haul provides the support and tools you need to succeed and grow, so if you want a job with endless opportunities for career growth, apply today! Our motto is "Hire Fast, Pay Fast." You can start today and get paid today! Schedule a hands-on working interview and get paid for it. We also offer a $100 hiring bonus! Transfer Driver Primary Responsibilities: • Fill in receipt and intake paperwork electronically., • Transport U-Haul equipment between U-Haul centers, dealerships and the repair shop., • Perform visual inspections of equipment., • Maintain a driver log., • Team Members are expected to willingly lend assistance in additional areas as necessary, following the directives and guidance of their supervisor. Starting Pay: $11- $12 per hr. Transfer Driver Minimum Qualifications: • Valid driver's license, • Able to use mobile transfer programs, • D.O.T. certification if required—can be sponsored by U-Haul Perks of joining the U-Haul Team: Get your career moving with a company who empowers team members to be the healthiest version of themselves! We provide robust wellness benefits, events, and resources to help team members become the happiest and healthiest they can be. We offer a Technician Training program that encompasses both Ford and GMC Training Classes, as well as a tool purchase program. U-Haul offers Transfer Drivers: • Paid holidays, vacation, and sick days, if eligible, • Career stability, • Gym Reimbursement Program, if eligible, • Opportunities for advancement, • Valuable on-the-job training, • Complete Benefit Plan, if eligible, • RRSP payroll deduction plan, • Deferred profit-sharing plan, if eligible, • You Matter Program (EAP), • Mindset App Program, • Wellness Programs, • Discounts on Apple products, Dell computers, hotels, and more Work Environment: The work involves moderate risks or discomforts which require special safety precautions, e.g., working around moving parts, machines, fumes, or chemicals. May be required to use protective clothing or gear such as masks, goggles, gloves, or shields. Physical Demands: The work requires some physical exertion, such as long periods both indoors and outdoors while remaining stationary, traversing spaces, repositioning to reach and use tools, and moving a minimum of 50 lbs. assisted or unassisted. U-Haul is an equal opportunity employer. All applications for employment will be considered without regard to race, color, religion, sex, national origin, physical or mental disability, veteran status, or any other basis protected by applicable federal, provincial, state, or local law. Individual accommodations are available on requests for applicants taking part in all aspects of the selection process. Information obtained during this process will only be shared on a need to know basis.

Job Description We are a highly reputable auto repair shop in Corpus Christi, TX. We are family owned and have been servicing European cars for the past 35 years. Our spacious shop is equipped with the latest factory diagnostic tools required to service our customers’ cars. The shop has dealer level equipment and all resources including Autologic. Experience with the Mitchell program is preferred. If you have experience working on cars, we would love to meet with you and show you the cars we’re working on. Job duties as an Auto Technician: • Able to diagnose and repair automotive systems including engines, steering, brakes, suspension, transmission, air conditioning, etc., • repair or replace faulty parts and carry out regular maintenance., • advise customers on what repairs are needed, including cost., • Ability to work in a fast-paced environment., • Continuously learn new technical information and techniques, • Adhere to all company policy, procedure, safety and environmental rules. Pay is negotiable Experience Required

Job Description Do you want to work at one of the busiest repair shops in the region where your employer treats you like a member of the family? We are hiring experienced Automotive Ford Certified Technicians to work in our busy service department! There has never been a better time to advance your career in the automotive industry. This is a RARE opportunity to make a difference by joining a thriving, award-winning auto dealer team! Apply today. Business is booming and we need to fill this position now. We will support you daily and help you take your career to the next level. Let us make you an offer! This is a true career opportunity. Come grow with us. All Certified Ford Techs are encouraged to apply. We want to meet you! Busy shops, tons of work, flexible work schedules, paid training classes and certifications. Applicants must have a valid driver’s license and a clean driving record. We are part of Lithia Auto Group, America's leading auto dealer. Our employee benefits include: Let us make you an offer! Up to $70 per flag hour Up to $25K per month Medical, Dental and Vision Plans Paid Holidays & PTO Short and Long-Term Disability Paid Life Insurance 401(k) Retirement Plan Employee Stock Purchase Plan Lithia Learning Center Vehicle Purchase Discounts Wellness Programs Access Ford of Corpus Christi 3680 I-69 Access Rd Corpus Christi, TX 78410 Submit your resume / work / education history to this job posting. Please include your name, address, email address and phone number on your resume. When can you interview and when can you start? \nCompany Description We are part of Lithia Auto Group, America's leading auto dealer. We are part of Lithia Auto Group, America's leading auto dealer.